From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: broonie@kernel.org Cc: alsa-devel@alsa-project.org, lgirdwood@gmail.com, perex@perex.cz, tiwai@suse.com, linux-kernel@vger.kernel.org, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Subject: [PATCH 0/4] ASoC: codecs: add WSA883x support Date: Wed, 29 Jun 2022 10:06:40 +0100 [thread overview] Message-ID: <20220629090644.67982-1-srinivas.kandagatla@linaro.org> (raw) This patchset adds support for WSA883x smart speaker amplifier codec connected via SoundWire. This codec also has a temperature sensor used for speaker protection, support for this is not added yet. Most of the code is derived from Qualcomm downstream msm-5.10 kernel. Thanks to Patrick Lai's Team. This codec is tested on SM8450 MTP. Thanks, Srini Srinivas Kandagatla (4): ASoC: dt-bindings: Add WSA883x bindings ASoC: codecs: add wsa883x amplifier support ASoC: codecs: wsa883x: add control, dapm widgets and map MAINTAINERS: add ASoC Qualcomm codecs .../bindings/sound/qcom,wsa883x.yaml | 74 + MAINTAINERS | 4 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wsa883x.c | 1498 +++++++++++++++++ 5 files changed, 1588 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml create mode 100644 sound/soc/codecs/wsa883x.c -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: broonie@kernel.org Cc: alsa-devel@alsa-project.org, lgirdwood@gmail.com, linux-kernel@vger.kernel.org, tiwai@suse.com, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Subject: [PATCH 0/4] ASoC: codecs: add WSA883x support Date: Wed, 29 Jun 2022 10:06:40 +0100 [thread overview] Message-ID: <20220629090644.67982-1-srinivas.kandagatla@linaro.org> (raw) This patchset adds support for WSA883x smart speaker amplifier codec connected via SoundWire. This codec also has a temperature sensor used for speaker protection, support for this is not added yet. Most of the code is derived from Qualcomm downstream msm-5.10 kernel. Thanks to Patrick Lai's Team. This codec is tested on SM8450 MTP. Thanks, Srini Srinivas Kandagatla (4): ASoC: dt-bindings: Add WSA883x bindings ASoC: codecs: add wsa883x amplifier support ASoC: codecs: wsa883x: add control, dapm widgets and map MAINTAINERS: add ASoC Qualcomm codecs .../bindings/sound/qcom,wsa883x.yaml | 74 + MAINTAINERS | 4 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wsa883x.c | 1498 +++++++++++++++++ 5 files changed, 1588 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml create mode 100644 sound/soc/codecs/wsa883x.c -- 2.25.1
next reply other threads:[~2022-06-29 9:07 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-06-29 9:06 Srinivas Kandagatla [this message] 2022-06-29 9:06 ` [PATCH 0/4] ASoC: codecs: add WSA883x support Srinivas Kandagatla 2022-06-29 9:06 ` [PATCH 1/4] ASoC: dt-bindings: Add WSA883x bindings Srinivas Kandagatla 2022-06-29 9:06 ` Srinivas Kandagatla 2022-06-29 9:06 ` [PATCH 2/4] ASoC: codecs: add wsa883x amplifier support Srinivas Kandagatla 2022-06-29 9:06 ` Srinivas Kandagatla 2022-06-29 15:03 ` Pierre-Louis Bossart 2022-06-29 15:03 ` Pierre-Louis Bossart 2022-06-29 16:09 ` Srinivas Kandagatla 2022-06-29 16:09 ` Srinivas Kandagatla 2022-06-29 16:42 ` Pierre-Louis Bossart 2022-06-29 16:42 ` Pierre-Louis Bossart 2022-06-29 9:06 ` [PATCH 3/4] ASoC: codecs: wsa883x: add control, dapm widgets and map Srinivas Kandagatla 2022-06-29 9:06 ` Srinivas Kandagatla 2022-06-29 10:58 ` Mark Brown 2022-06-29 10:58 ` Mark Brown 2022-06-29 11:00 ` Srinivas Kandagatla 2022-06-29 11:00 ` Srinivas Kandagatla 2022-06-29 9:06 ` [PATCH 4/4] MAINTAINERS: add ASoC Qualcomm codecs Srinivas Kandagatla 2022-06-29 9:06 ` Srinivas Kandagatla 2022-06-29 14:44 ` (subset) [PATCH 0/4] ASoC: codecs: add WSA883x support Mark Brown 2022-06-29 14:44 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220629090644.67982-1-srinivas.kandagatla@linaro.org \ --to=srinivas.kandagatla@linaro.org \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=perex@perex.cz \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.