All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Mark Brown <broonie@kernel.org>
Cc: <alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
	<linux-kernel@vger.kernel.org>,
	Stefan Binding <sbinding@opensource.cirrus.com>
Subject: [PATCH v8 10/14] ALSA: hda: cs35l41: Read Speaker Calibration data from UEFI variables
Date: Thu, 30 Jun 2022 01:23:31 +0100	[thread overview]
Message-ID: <20220630002335.366545-11-vitalyr@opensource.cirrus.com> (raw)
In-Reply-To: <20220630002335.366545-1-vitalyr@opensource.cirrus.com>

From: Stefan Binding <sbinding@opensource.cirrus.com>

Speaker Calibration data, specific to an individual speaker is
stored inside UEFI variables during calibration, and can be
used by the DSP.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
---
 sound/pci/hda/cs35l41_hda.c | 101 ++++++++++++++++++++++++++++++++++++
 sound/pci/hda/cs35l41_hda.h |  15 ++++++
 2 files changed, 116 insertions(+)

diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index 4f818229e62e..68f18463d829 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -26,6 +26,12 @@
 #define HALO_STATE_DSP_CTL_NAME		"HALO_STATE"
 #define HALO_STATE_DSP_CTL_TYPE		5
 #define HALO_STATE_DSP_CTL_ALG		262308
+#define CAL_R_DSP_CTL_NAME		"CAL_R"
+#define CAL_STATUS_DSP_CTL_NAME		"CAL_STATUS"
+#define CAL_CHECKSUM_DSP_CTL_NAME	"CAL_CHECKSUM"
+#define CAL_AMBIENT_DSP_CTL_NAME	"CAL_AMBIENT"
+#define CAL_DSP_CTL_TYPE		5
+#define CAL_DSP_CTL_ALG			205
 
 static const struct reg_sequence cs35l41_hda_config[] = {
 	{ CS35L41_PLL_CLK_CTRL,		0x00000430 }, // 3072000Hz, BCLK Input, PLL_REFCLK_EN = 1
@@ -282,6 +288,96 @@ static int cs35l41_request_firmware_files(struct cs35l41_hda *cs35l41,
 	return ret;
 }
 
+#if IS_ENABLED(CONFIG_EFI)
+static int cs35l41_apply_calibration(struct cs35l41_hda *cs35l41, unsigned int ambient,
+				     unsigned int r0, unsigned int status, unsigned int checksum)
+{
+	int ret;
+
+	ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_AMBIENT_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
+				   CAL_DSP_CTL_ALG, &ambient, 4);
+	if (ret) {
+		dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_AMBIENT_DSP_CTL_NAME,
+			ret);
+		return ret;
+	}
+	ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_R_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
+				   CAL_DSP_CTL_ALG, &r0, 4);
+	if (ret) {
+		dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_R_DSP_CTL_NAME, ret);
+		return ret;
+	}
+	ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_STATUS_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
+				   CAL_DSP_CTL_ALG, &status, 4);
+	if (ret) {
+		dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_STATUS_DSP_CTL_NAME,
+			ret);
+		return ret;
+	}
+	ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_CHECKSUM_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
+				   CAL_DSP_CTL_ALG, &checksum, 4);
+	if (ret) {
+		dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_CHECKSUM_DSP_CTL_NAME,
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cs35l41_save_calibration(struct cs35l41_hda *cs35l41)
+{
+	static efi_guid_t efi_guid = EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe,
+					      0x5a, 0xa3, 0x5d, 0xb3);
+	static efi_char16_t efi_name[] = L"CirrusSmartAmpCalibrationData";
+	const struct cs35l41_amp_efi_data *efi_data;
+	const struct cs35l41_amp_cal_data *cl;
+	unsigned long data_size = 0;
+	efi_status_t status;
+	int ret = 0;
+	u8 *data = NULL;
+	u32 attr;
+
+	/* Get real size of UEFI variable */
+	status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
+	if (status == EFI_BUFFER_TOO_SMALL) {
+		ret = -ENODEV;
+		/* Allocate data buffer of data_size bytes */
+		data = vmalloc(data_size);
+		if (!data)
+			return -ENOMEM;
+		/* Get variable contents into buffer */
+		status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
+		if (status == EFI_SUCCESS) {
+			efi_data = (struct cs35l41_amp_efi_data *)data;
+			dev_dbg(cs35l41->dev, "Calibration: Size=%d, Amp Count=%d\n",
+				efi_data->size, efi_data->count);
+			if (efi_data->count > cs35l41->index) {
+				cl = &efi_data->data[cs35l41->index];
+				dev_dbg(cs35l41->dev,
+					"Calibration: Ambient=%02x, Status=%02x, R0=%d\n",
+					cl->calAmbient, cl->calStatus, cl->calR);
+
+				/* Calibration can only be applied whilst the DSP is not running */
+				ret = cs35l41_apply_calibration(cs35l41,
+								cpu_to_be32(cl->calAmbient),
+								cpu_to_be32(cl->calR),
+								cpu_to_be32(cl->calStatus),
+								cpu_to_be32(cl->calR + 1));
+			}
+		}
+		vfree(data);
+	}
+	return ret;
+}
+#else
+static int cs35l41_save_calibration(struct cs35l41_hda *cs35l41)
+{
+	dev_warn(cs35l41->dev, "Calibration not supported without EFI support.\n");
+	return 0;
+}
+#endif
+
 static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
 {
 	const struct firmware *coeff_firmware = NULL;
@@ -314,7 +410,12 @@ static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
 
 	ret = cs_dsp_power_up(dsp, wmfw_firmware, wmfw_filename, coeff_firmware, coeff_filename,
 			      FW_NAME);
+	if (ret)
+		goto err_release;
+
+	ret = cs35l41_save_calibration(cs35l41);
 
+err_release:
 	release_firmware(wmfw_firmware);
 	release_firmware(coeff_firmware);
 	kfree(wmfw_filename);
diff --git a/sound/pci/hda/cs35l41_hda.h b/sound/pci/hda/cs35l41_hda.h
index 439c4b705328..59a9461d0444 100644
--- a/sound/pci/hda/cs35l41_hda.h
+++ b/sound/pci/hda/cs35l41_hda.h
@@ -10,6 +10,7 @@
 #ifndef __CS35L41_HDA_H__
 #define __CS35L41_HDA_H__
 
+#include <linux/efi.h>
 #include <linux/regulator/consumer.h>
 #include <linux/gpio/consumer.h>
 #include <linux/device.h>
@@ -18,6 +19,20 @@
 #include <linux/firmware/cirrus/cs_dsp.h>
 #include <linux/firmware/cirrus/wmfw.h>
 
+struct cs35l41_amp_cal_data {
+	u32 calTarget[2];
+	u32 calTime[2];
+	s8 calAmbient;
+	u8 calStatus;
+	u16 calR;
+} __packed;
+
+struct cs35l41_amp_efi_data {
+	u32 size;
+	u32 count;
+	struct cs35l41_amp_cal_data data[];
+} __packed;
+
 enum cs35l41_hda_spk_pos {
 	CS35l41_LEFT,
 	CS35l41_RIGHT,
-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Mark Brown <broonie@kernel.org>
Cc: patches@opensource.cirrus.com, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org,
	Stefan Binding <sbinding@opensource.cirrus.com>
Subject: [PATCH v8 10/14] ALSA: hda: cs35l41: Read Speaker Calibration data from UEFI variables
Date: Thu, 30 Jun 2022 01:23:31 +0100	[thread overview]
Message-ID: <20220630002335.366545-11-vitalyr@opensource.cirrus.com> (raw)
In-Reply-To: <20220630002335.366545-1-vitalyr@opensource.cirrus.com>

From: Stefan Binding <sbinding@opensource.cirrus.com>

Speaker Calibration data, specific to an individual speaker is
stored inside UEFI variables during calibration, and can be
used by the DSP.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
---
 sound/pci/hda/cs35l41_hda.c | 101 ++++++++++++++++++++++++++++++++++++
 sound/pci/hda/cs35l41_hda.h |  15 ++++++
 2 files changed, 116 insertions(+)

diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index 4f818229e62e..68f18463d829 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -26,6 +26,12 @@
 #define HALO_STATE_DSP_CTL_NAME		"HALO_STATE"
 #define HALO_STATE_DSP_CTL_TYPE		5
 #define HALO_STATE_DSP_CTL_ALG		262308
+#define CAL_R_DSP_CTL_NAME		"CAL_R"
+#define CAL_STATUS_DSP_CTL_NAME		"CAL_STATUS"
+#define CAL_CHECKSUM_DSP_CTL_NAME	"CAL_CHECKSUM"
+#define CAL_AMBIENT_DSP_CTL_NAME	"CAL_AMBIENT"
+#define CAL_DSP_CTL_TYPE		5
+#define CAL_DSP_CTL_ALG			205
 
 static const struct reg_sequence cs35l41_hda_config[] = {
 	{ CS35L41_PLL_CLK_CTRL,		0x00000430 }, // 3072000Hz, BCLK Input, PLL_REFCLK_EN = 1
@@ -282,6 +288,96 @@ static int cs35l41_request_firmware_files(struct cs35l41_hda *cs35l41,
 	return ret;
 }
 
+#if IS_ENABLED(CONFIG_EFI)
+static int cs35l41_apply_calibration(struct cs35l41_hda *cs35l41, unsigned int ambient,
+				     unsigned int r0, unsigned int status, unsigned int checksum)
+{
+	int ret;
+
+	ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_AMBIENT_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
+				   CAL_DSP_CTL_ALG, &ambient, 4);
+	if (ret) {
+		dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_AMBIENT_DSP_CTL_NAME,
+			ret);
+		return ret;
+	}
+	ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_R_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
+				   CAL_DSP_CTL_ALG, &r0, 4);
+	if (ret) {
+		dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_R_DSP_CTL_NAME, ret);
+		return ret;
+	}
+	ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_STATUS_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
+				   CAL_DSP_CTL_ALG, &status, 4);
+	if (ret) {
+		dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_STATUS_DSP_CTL_NAME,
+			ret);
+		return ret;
+	}
+	ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_CHECKSUM_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
+				   CAL_DSP_CTL_ALG, &checksum, 4);
+	if (ret) {
+		dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_CHECKSUM_DSP_CTL_NAME,
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cs35l41_save_calibration(struct cs35l41_hda *cs35l41)
+{
+	static efi_guid_t efi_guid = EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe,
+					      0x5a, 0xa3, 0x5d, 0xb3);
+	static efi_char16_t efi_name[] = L"CirrusSmartAmpCalibrationData";
+	const struct cs35l41_amp_efi_data *efi_data;
+	const struct cs35l41_amp_cal_data *cl;
+	unsigned long data_size = 0;
+	efi_status_t status;
+	int ret = 0;
+	u8 *data = NULL;
+	u32 attr;
+
+	/* Get real size of UEFI variable */
+	status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
+	if (status == EFI_BUFFER_TOO_SMALL) {
+		ret = -ENODEV;
+		/* Allocate data buffer of data_size bytes */
+		data = vmalloc(data_size);
+		if (!data)
+			return -ENOMEM;
+		/* Get variable contents into buffer */
+		status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
+		if (status == EFI_SUCCESS) {
+			efi_data = (struct cs35l41_amp_efi_data *)data;
+			dev_dbg(cs35l41->dev, "Calibration: Size=%d, Amp Count=%d\n",
+				efi_data->size, efi_data->count);
+			if (efi_data->count > cs35l41->index) {
+				cl = &efi_data->data[cs35l41->index];
+				dev_dbg(cs35l41->dev,
+					"Calibration: Ambient=%02x, Status=%02x, R0=%d\n",
+					cl->calAmbient, cl->calStatus, cl->calR);
+
+				/* Calibration can only be applied whilst the DSP is not running */
+				ret = cs35l41_apply_calibration(cs35l41,
+								cpu_to_be32(cl->calAmbient),
+								cpu_to_be32(cl->calR),
+								cpu_to_be32(cl->calStatus),
+								cpu_to_be32(cl->calR + 1));
+			}
+		}
+		vfree(data);
+	}
+	return ret;
+}
+#else
+static int cs35l41_save_calibration(struct cs35l41_hda *cs35l41)
+{
+	dev_warn(cs35l41->dev, "Calibration not supported without EFI support.\n");
+	return 0;
+}
+#endif
+
 static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
 {
 	const struct firmware *coeff_firmware = NULL;
@@ -314,7 +410,12 @@ static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
 
 	ret = cs_dsp_power_up(dsp, wmfw_firmware, wmfw_filename, coeff_firmware, coeff_filename,
 			      FW_NAME);
+	if (ret)
+		goto err_release;
+
+	ret = cs35l41_save_calibration(cs35l41);
 
+err_release:
 	release_firmware(wmfw_firmware);
 	release_firmware(coeff_firmware);
 	kfree(wmfw_filename);
diff --git a/sound/pci/hda/cs35l41_hda.h b/sound/pci/hda/cs35l41_hda.h
index 439c4b705328..59a9461d0444 100644
--- a/sound/pci/hda/cs35l41_hda.h
+++ b/sound/pci/hda/cs35l41_hda.h
@@ -10,6 +10,7 @@
 #ifndef __CS35L41_HDA_H__
 #define __CS35L41_HDA_H__
 
+#include <linux/efi.h>
 #include <linux/regulator/consumer.h>
 #include <linux/gpio/consumer.h>
 #include <linux/device.h>
@@ -18,6 +19,20 @@
 #include <linux/firmware/cirrus/cs_dsp.h>
 #include <linux/firmware/cirrus/wmfw.h>
 
+struct cs35l41_amp_cal_data {
+	u32 calTarget[2];
+	u32 calTime[2];
+	s8 calAmbient;
+	u8 calStatus;
+	u16 calR;
+} __packed;
+
+struct cs35l41_amp_efi_data {
+	u32 size;
+	u32 count;
+	struct cs35l41_amp_cal_data data[];
+} __packed;
+
 enum cs35l41_hda_spk_pos {
 	CS35l41_LEFT,
 	CS35l41_RIGHT,
-- 
2.34.1


  parent reply	other threads:[~2022-06-30  0:24 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-30  0:23 [PATCH v8 00/14] ALSA: hda: cirrus: Add initial DSP support and firmware loading Vitaly Rodionov
2022-06-30  0:23 ` Vitaly Rodionov
2022-06-30  0:23 ` [PATCH v8 01/14] ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-07-14  9:03   ` Takashi Iwai
2022-07-14  9:03     ` Takashi Iwai
2022-07-14  9:06     ` Takashi Iwai
2022-07-14  9:06       ` Takashi Iwai
2022-07-14  9:26       ` Takashi Iwai
2022-07-14  9:26         ` Takashi Iwai
2022-06-30  0:23 ` [PATCH v8 02/14] ALSA: hda: hda_cs_dsp_ctl: Add apis to write the controls directly Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-06-30  0:23 ` [PATCH v8 03/14] ALSA: hda: cs35l41: Save codec object inside component struct Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-06-30  0:23 ` [PATCH v8 04/14] ALSA: hda: cs35l41: Add initial DSP support and firmware loading Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-06-30  0:23 ` [PATCH v8 05/14] ALSA: hda: cs35l41: Save Subsystem ID inside CS35L41 Driver Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-06-30  0:23 ` [PATCH v8 06/14] ALSA: hda: cs35l41: Support reading subsystem id from ACPI Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-06-30  0:23 ` [PATCH v8 07/14] ALSA: hda: cs35l41: Support multiple load paths for firmware Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-06-30  0:23 ` [PATCH v8 08/14] ALSA: hda: cs35l41: Support Speaker ID for laptops Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-06-30  0:23 ` [PATCH v8 09/14] ALSA: hda: cs35l41: Support Hibernation during Suspend Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-06-30  0:23 ` Vitaly Rodionov [this message]
2022-06-30  0:23   ` [PATCH v8 10/14] ALSA: hda: cs35l41: Read Speaker Calibration data from UEFI variables Vitaly Rodionov
2022-06-30  0:23 ` [PATCH v8 11/14] ALSA: hda: hda_cs_dsp_ctl: Add fw id strings Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-06-30  0:23 ` [PATCH v8 12/14] ALSA: hda: cs35l41: Add defaulted values into dsp bypass config sequence Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-06-30  0:23 ` [PATCH v8 13/14] ALSA: hda: cs35l41: Support Firmware switching and reloading Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-06-30  0:23 ` [PATCH v8 14/14] ALSA: hda: cs35l41: Add module parameter to control firmware load Vitaly Rodionov
2022-06-30  0:23   ` Vitaly Rodionov
2022-07-04 12:50 ` [PATCH v8 00/14] ALSA: hda: cirrus: Add initial DSP support and firmware loading Takashi Iwai
2022-07-04 12:50   ` Takashi Iwai
2022-07-06 10:40   ` Vitaly Rodionov
2022-07-15 14:25     ` Takashi Iwai
2022-07-15 14:25       ` Takashi Iwai
2022-07-09 16:27   ` Takashi Iwai
2022-07-09 16:27     ` Takashi Iwai
2022-07-13 11:41     ` Takashi Iwai
2022-07-13 11:41       ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220630002335.366545-11-vitalyr@opensource.cirrus.com \
    --to=vitalyr@opensource.cirrus.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=sbinding@opensource.cirrus.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.