All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 0/3] drm/bridge: fsl-ldb: A few fixes
@ 2022-07-01  6:56 ` Liu Ying
  0 siblings, 0 replies; 20+ messages in thread
From: Liu Ying @ 2022-07-01  6:56 UTC (permalink / raw)
  To: dri-devel, linux-kernel
  Cc: andrzej.hajda, narmstrong, robert.foss, Laurent.pinchart, jonas,
	jernej.skrabec, airlied, daniel, sam, marex, linux-imx

Hi,

This series contains three fixes for the fsl-ldb bridge driver.

Patch 1/3 fixes mode clock rate validation.
Patch 2/3 fixes LVDS dual link mode.
Patch 3/3 fixes input data enable signal polarity.

Liu Ying (3):
  drm/bridge: fsl-ldb: Fix mode clock rate validation
  drm/bridge: fsl-ldb: Enable split mode for LVDS dual link
  drm/bridge: fsl-ldb: Drop DE signal polarity inversion

 drivers/gpu/drm/bridge/fsl-ldb.c | 21 ++-------------------
 1 file changed, 2 insertions(+), 19 deletions(-)

-- 
2.25.1


^ permalink raw reply	[flat|nested] 20+ messages in thread
* [PATCH 0/3] drm/bridge: fsl-ldb: A few fixes
@ 2022-07-01  6:56 ` Liu Ying
  0 siblings, 0 replies; 20+ messages in thread
From: Liu Ying @ 2022-07-01  6:56 UTC (permalink / raw)
  To: dri-devel, linux-kernel
  Cc: marex, jonas, airlied, robert.foss, narmstrong, jernej.skrabec,
	Laurent.pinchart, andrzej.hajda, sam, linux-imx

Hi,

This series contains three fixes for the fsl-ldb bridge driver.

Patch 1/3 fixes mode clock rate validation.
Patch 2/3 fixes LVDS dual link mode.
Patch 3/3 fixes input data enable signal polarity.

Liu Ying (3):
  drm/bridge: fsl-ldb: Fix mode clock rate validation
  drm/bridge: fsl-ldb: Enable split mode for LVDS dual link
  drm/bridge: fsl-ldb: Drop DE signal polarity inversion

 drivers/gpu/drm/bridge/fsl-ldb.c | 21 ++-------------------
 1 file changed, 2 insertions(+), 19 deletions(-)

-- 
2.25.1


^ permalink raw reply	[flat|nested] 20+ messages in thread
* [PATCH 1/3] drm/bridge: fsl-ldb: Fix mode clock rate validation
  2022-07-01  6:56 ` Liu Ying
@ 2022-07-01  6:56   ` Liu Ying
  -1 siblings, 0 replies; 20+ messages in thread
From: Liu Ying @ 2022-07-01  6:56 UTC (permalink / raw)
  To: dri-devel, linux-kernel
  Cc: andrzej.hajda, narmstrong, robert.foss, Laurent.pinchart, jonas,
	jernej.skrabec, airlied, daniel, sam, marex, linux-imx

With LVDS dual link, up to 160MHz mode clock rate is supported.
With LVDS single link, up to 80MHz mode clock rate is supported.
Fix mode clock rate validation by swapping the maximum mode clock
rates of the two link modes.

Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
 drivers/gpu/drm/bridge/fsl-ldb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/fsl-ldb.c b/drivers/gpu/drm/bridge/fsl-ldb.c
index b2675c769a55..3cb3b310e283 100644
--- a/drivers/gpu/drm/bridge/fsl-ldb.c
+++ b/drivers/gpu/drm/bridge/fsl-ldb.c
@@ -233,7 +233,7 @@ fsl_ldb_mode_valid(struct drm_bridge *bridge,
 {
 	struct fsl_ldb *fsl_ldb = to_fsl_ldb(bridge);
 
-	if (mode->clock > (fsl_ldb->lvds_dual_link ? 80000 : 160000))
+	if (mode->clock > (fsl_ldb->lvds_dual_link ? 160000 : 80000))
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [PATCH 1/3] drm/bridge: fsl-ldb: Fix mode clock rate validation
@ 2022-07-01  6:56   ` Liu Ying
  0 siblings, 0 replies; 20+ messages in thread
From: Liu Ying @ 2022-07-01  6:56 UTC (permalink / raw)
  To: dri-devel, linux-kernel
  Cc: marex, jonas, airlied, robert.foss, narmstrong, jernej.skrabec,
	Laurent.pinchart, andrzej.hajda, sam, linux-imx

With LVDS dual link, up to 160MHz mode clock rate is supported.
With LVDS single link, up to 80MHz mode clock rate is supported.
Fix mode clock rate validation by swapping the maximum mode clock
rates of the two link modes.

Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
 drivers/gpu/drm/bridge/fsl-ldb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/fsl-ldb.c b/drivers/gpu/drm/bridge/fsl-ldb.c
index b2675c769a55..3cb3b310e283 100644
--- a/drivers/gpu/drm/bridge/fsl-ldb.c
+++ b/drivers/gpu/drm/bridge/fsl-ldb.c
@@ -233,7 +233,7 @@ fsl_ldb_mode_valid(struct drm_bridge *bridge,
 {
 	struct fsl_ldb *fsl_ldb = to_fsl_ldb(bridge);
 
-	if (mode->clock > (fsl_ldb->lvds_dual_link ? 80000 : 160000))
+	if (mode->clock > (fsl_ldb->lvds_dual_link ? 160000 : 80000))
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [PATCH 2/3] drm/bridge: fsl-ldb: Enable split mode for LVDS dual link
  2022-07-01  6:56 ` Liu Ying
@ 2022-07-01  6:56   ` Liu Ying
  -1 siblings, 0 replies; 20+ messages in thread
From: Liu Ying @ 2022-07-01  6:56 UTC (permalink / raw)
  To: dri-devel, linux-kernel
  Cc: andrzej.hajda, narmstrong, robert.foss, Laurent.pinchart, jonas,
	jernej.skrabec, airlied, daniel, sam, marex, linux-imx

When LVDS dual link is used, we have to enable the LDB_CTRL_SPLIT_MODE bit.

Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
 drivers/gpu/drm/bridge/fsl-ldb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/fsl-ldb.c b/drivers/gpu/drm/bridge/fsl-ldb.c
index 3cb3b310e283..d4f005eef6f6 100644
--- a/drivers/gpu/drm/bridge/fsl-ldb.c
+++ b/drivers/gpu/drm/bridge/fsl-ldb.c
@@ -153,7 +153,7 @@ static void fsl_ldb_atomic_enable(struct drm_bridge *bridge,
 	reg = LDB_CTRL_CH0_ENABLE;
 
 	if (fsl_ldb->lvds_dual_link)
-		reg |= LDB_CTRL_CH1_ENABLE;
+		reg |= LDB_CTRL_CH1_ENABLE | LDB_CTRL_SPLIT_MODE;
 
 	if (lvds_format_24bpp) {
 		reg |= LDB_CTRL_CH0_DATA_WIDTH;
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [PATCH 2/3] drm/bridge: fsl-ldb: Enable split mode for LVDS dual link
@ 2022-07-01  6:56   ` Liu Ying
  0 siblings, 0 replies; 20+ messages in thread
From: Liu Ying @ 2022-07-01  6:56 UTC (permalink / raw)
  To: dri-devel, linux-kernel
  Cc: marex, jonas, airlied, robert.foss, narmstrong, jernej.skrabec,
	Laurent.pinchart, andrzej.hajda, sam, linux-imx

When LVDS dual link is used, we have to enable the LDB_CTRL_SPLIT_MODE bit.

Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
 drivers/gpu/drm/bridge/fsl-ldb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/fsl-ldb.c b/drivers/gpu/drm/bridge/fsl-ldb.c
index 3cb3b310e283..d4f005eef6f6 100644
--- a/drivers/gpu/drm/bridge/fsl-ldb.c
+++ b/drivers/gpu/drm/bridge/fsl-ldb.c
@@ -153,7 +153,7 @@ static void fsl_ldb_atomic_enable(struct drm_bridge *bridge,
 	reg = LDB_CTRL_CH0_ENABLE;
 
 	if (fsl_ldb->lvds_dual_link)
-		reg |= LDB_CTRL_CH1_ENABLE;
+		reg |= LDB_CTRL_CH1_ENABLE | LDB_CTRL_SPLIT_MODE;
 
 	if (lvds_format_24bpp) {
 		reg |= LDB_CTRL_CH0_DATA_WIDTH;
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [PATCH 3/3] drm/bridge: fsl-ldb: Drop DE signal polarity inversion
  2022-07-01  6:56 ` Liu Ying
@ 2022-07-01  6:56   ` Liu Ying
  -1 siblings, 0 replies; 20+ messages in thread
From: Liu Ying @ 2022-07-01  6:56 UTC (permalink / raw)
  To: dri-devel, linux-kernel
  Cc: marex, jonas, airlied, robert.foss, narmstrong, jernej.skrabec,
	Laurent.pinchart, andrzej.hajda, sam, linux-imx

It's unnecessary to invert input data enable signal polarity
according to the output one. Let's drop the inversion.
Since ->atomic_check() does nothing more than the inversion,
it can be dropped entirely as well.

Without this patch, 'koe,tx26d202vm0bwa' LVDS panel connected
with i.MX8MP EVK board does not show any data on screen.

Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
 drivers/gpu/drm/bridge/fsl-ldb.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/gpu/drm/bridge/fsl-ldb.c b/drivers/gpu/drm/bridge/fsl-ldb.c
index d4f005eef6f6..4b503c544256 100644
--- a/drivers/gpu/drm/bridge/fsl-ldb.c
+++ b/drivers/gpu/drm/bridge/fsl-ldb.c
@@ -74,22 +74,6 @@ static int fsl_ldb_attach(struct drm_bridge *bridge,
 				 bridge, flags);
 }
 
-static int fsl_ldb_atomic_check(struct drm_bridge *bridge,
-				struct drm_bridge_state *bridge_state,
-				struct drm_crtc_state *crtc_state,
-				struct drm_connector_state *conn_state)
-{
-	/* Invert DE signal polarity. */
-	bridge_state->input_bus_cfg.flags &= ~(DRM_BUS_FLAG_DE_LOW |
-					       DRM_BUS_FLAG_DE_HIGH);
-	if (bridge_state->output_bus_cfg.flags & DRM_BUS_FLAG_DE_LOW)
-		bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_HIGH;
-	else if (bridge_state->output_bus_cfg.flags & DRM_BUS_FLAG_DE_HIGH)
-		bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_LOW;
-
-	return 0;
-}
-
 static void fsl_ldb_atomic_enable(struct drm_bridge *bridge,
 				  struct drm_bridge_state *old_bridge_state)
 {
@@ -241,7 +225,6 @@ fsl_ldb_mode_valid(struct drm_bridge *bridge,
 
 static const struct drm_bridge_funcs funcs = {
 	.attach = fsl_ldb_attach,
-	.atomic_check = fsl_ldb_atomic_check,
 	.atomic_enable = fsl_ldb_atomic_enable,
 	.atomic_disable = fsl_ldb_atomic_disable,
 	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* [PATCH 3/3] drm/bridge: fsl-ldb: Drop DE signal polarity inversion
@ 2022-07-01  6:56   ` Liu Ying
  0 siblings, 0 replies; 20+ messages in thread
From: Liu Ying @ 2022-07-01  6:56 UTC (permalink / raw)
  To: dri-devel, linux-kernel
  Cc: andrzej.hajda, narmstrong, robert.foss, Laurent.pinchart, jonas,
	jernej.skrabec, airlied, daniel, sam, marex, linux-imx

It's unnecessary to invert input data enable signal polarity
according to the output one. Let's drop the inversion.
Since ->atomic_check() does nothing more than the inversion,
it can be dropped entirely as well.

Without this patch, 'koe,tx26d202vm0bwa' LVDS panel connected
with i.MX8MP EVK board does not show any data on screen.

Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
 drivers/gpu/drm/bridge/fsl-ldb.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/gpu/drm/bridge/fsl-ldb.c b/drivers/gpu/drm/bridge/fsl-ldb.c
index d4f005eef6f6..4b503c544256 100644
--- a/drivers/gpu/drm/bridge/fsl-ldb.c
+++ b/drivers/gpu/drm/bridge/fsl-ldb.c
@@ -74,22 +74,6 @@ static int fsl_ldb_attach(struct drm_bridge *bridge,
 				 bridge, flags);
 }
 
-static int fsl_ldb_atomic_check(struct drm_bridge *bridge,
-				struct drm_bridge_state *bridge_state,
-				struct drm_crtc_state *crtc_state,
-				struct drm_connector_state *conn_state)
-{
-	/* Invert DE signal polarity. */
-	bridge_state->input_bus_cfg.flags &= ~(DRM_BUS_FLAG_DE_LOW |
-					       DRM_BUS_FLAG_DE_HIGH);
-	if (bridge_state->output_bus_cfg.flags & DRM_BUS_FLAG_DE_LOW)
-		bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_HIGH;
-	else if (bridge_state->output_bus_cfg.flags & DRM_BUS_FLAG_DE_HIGH)
-		bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_LOW;
-
-	return 0;
-}
-
 static void fsl_ldb_atomic_enable(struct drm_bridge *bridge,
 				  struct drm_bridge_state *old_bridge_state)
 {
@@ -241,7 +225,6 @@ fsl_ldb_mode_valid(struct drm_bridge *bridge,
 
 static const struct drm_bridge_funcs funcs = {
 	.attach = fsl_ldb_attach,
-	.atomic_check = fsl_ldb_atomic_check,
 	.atomic_enable = fsl_ldb_atomic_enable,
 	.atomic_disable = fsl_ldb_atomic_disable,
 	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 20+ messages in thread
* Re: [PATCH 1/3] drm/bridge: fsl-ldb: Fix mode clock rate validation
  2022-07-01  6:56   ` Liu Ying
@ 2022-07-01  8:02     ` Marek Vasut
  -1 siblings, 0 replies; 20+ messages in thread
From: Marek Vasut @ 2022-07-01  8:02 UTC (permalink / raw)
  To: Liu Ying, dri-devel, linux-kernel
  Cc: andrzej.hajda, narmstrong, robert.foss, Laurent.pinchart, jonas,
	jernej.skrabec, airlied, daniel, sam, linux-imx

On 7/1/22 08:56, Liu Ying wrote:
> With LVDS dual link, up to 160MHz mode clock rate is supported.
> With LVDS single link, up to 80MHz mode clock rate is supported.
> Fix mode clock rate validation by swapping the maximum mode clock
> rates of the two link modes.
> 
> Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Robert Foss <robert.foss@linaro.org>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Cc: Jonas Karlman <jonas@kwiboo.se>
> Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Marek Vasut <marex@denx.de>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>

Reviewed-by: Marek Vasut <marex@denx.de>

^ permalink raw reply	[flat|nested] 20+ messages in thread
* Re: [PATCH 1/3] drm/bridge: fsl-ldb: Fix mode clock rate validation
@ 2022-07-01  8:02     ` Marek Vasut
  0 siblings, 0 replies; 20+ messages in thread
From: Marek Vasut @ 2022-07-01  8:02 UTC (permalink / raw)
  To: Liu Ying, dri-devel, linux-kernel
  Cc: jonas, airlied, robert.foss, narmstrong, jernej.skrabec,
	Laurent.pinchart, andrzej.hajda, sam, linux-imx

On 7/1/22 08:56, Liu Ying wrote:
> With LVDS dual link, up to 160MHz mode clock rate is supported.
> With LVDS single link, up to 80MHz mode clock rate is supported.
> Fix mode clock rate validation by swapping the maximum mode clock
> rates of the two link modes.
> 
> Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Robert Foss <robert.foss@linaro.org>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Cc: Jonas Karlman <jonas@kwiboo.se>
> Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Marek Vasut <marex@denx.de>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>

Reviewed-by: Marek Vasut <marex@denx.de>

^ permalink raw reply	[flat|nested] 20+ messages in thread
* Re: [PATCH 2/3] drm/bridge: fsl-ldb: Enable split mode for LVDS dual link
  2022-07-01  6:56   ` Liu Ying
@ 2022-07-01  8:02     ` Marek Vasut
  -1 siblings, 0 replies; 20+ messages in thread
From: Marek Vasut @ 2022-07-01  8:02 UTC (permalink / raw)
  To: Liu Ying, dri-devel, linux-kernel
  Cc: andrzej.hajda, narmstrong, robert.foss, Laurent.pinchart, jonas,
	jernej.skrabec, airlied, daniel, sam, linux-imx

On 7/1/22 08:56, Liu Ying wrote:
> When LVDS dual link is used, we have to enable the LDB_CTRL_SPLIT_MODE bit.
> 
> Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Robert Foss <robert.foss@linaro.org>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Cc: Jonas Karlman <jonas@kwiboo.se>
> Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Marek Vasut <marex@denx.de>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>

Reviewed-by: Marek Vasut <marex@denx.de>

^ permalink raw reply	[flat|nested] 20+ messages in thread
* Re: [PATCH 2/3] drm/bridge: fsl-ldb: Enable split mode for LVDS dual link
@ 2022-07-01  8:02     ` Marek Vasut
  0 siblings, 0 replies; 20+ messages in thread
From: Marek Vasut @ 2022-07-01  8:02 UTC (permalink / raw)
  To: Liu Ying, dri-devel, linux-kernel
  Cc: jonas, airlied, robert.foss, narmstrong, jernej.skrabec,
	Laurent.pinchart, andrzej.hajda, sam, linux-imx

On 7/1/22 08:56, Liu Ying wrote:
> When LVDS dual link is used, we have to enable the LDB_CTRL_SPLIT_MODE bit.
> 
> Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Robert Foss <robert.foss@linaro.org>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Cc: Jonas Karlman <jonas@kwiboo.se>
> Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Marek Vasut <marex@denx.de>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>

Reviewed-by: Marek Vasut <marex@denx.de>

^ permalink raw reply	[flat|nested] 20+ messages in thread
* Re: [PATCH 3/3] drm/bridge: fsl-ldb: Drop DE signal polarity inversion
  2022-07-01  6:56   ` Liu Ying
@ 2022-07-01  8:03     ` Marek Vasut
  -1 siblings, 0 replies; 20+ messages in thread
From: Marek Vasut @ 2022-07-01  8:03 UTC (permalink / raw)
  To: Liu Ying, dri-devel, linux-kernel
  Cc: andrzej.hajda, narmstrong, robert.foss, Laurent.pinchart, jonas,
	jernej.skrabec, airlied, daniel, sam, linux-imx

On 7/1/22 08:56, Liu Ying wrote:
> It's unnecessary to invert input data enable signal polarity
> according to the output one. Let's drop the inversion.
> Since ->atomic_check() does nothing more than the inversion,
> it can be dropped entirely as well.
> 
> Without this patch, 'koe,tx26d202vm0bwa' LVDS panel connected
> with i.MX8MP EVK board does not show any data on screen.

I send exactly the same change yesterday:
[PATCH] drm: bridge: ldb: Drop DE flip from Freescale i.MX8MP LDB bridge

So either can be applied.

Reviewed-by: Marek Vasut <marex@denx.de>

^ permalink raw reply	[flat|nested] 20+ messages in thread
* Re: [PATCH 3/3] drm/bridge: fsl-ldb: Drop DE signal polarity inversion
@ 2022-07-01  8:03     ` Marek Vasut
  0 siblings, 0 replies; 20+ messages in thread
From: Marek Vasut @ 2022-07-01  8:03 UTC (permalink / raw)
  To: Liu Ying, dri-devel, linux-kernel
  Cc: jonas, airlied, robert.foss, narmstrong, jernej.skrabec,
	Laurent.pinchart, andrzej.hajda, sam, linux-imx

On 7/1/22 08:56, Liu Ying wrote:
> It's unnecessary to invert input data enable signal polarity
> according to the output one. Let's drop the inversion.
> Since ->atomic_check() does nothing more than the inversion,
> it can be dropped entirely as well.
> 
> Without this patch, 'koe,tx26d202vm0bwa' LVDS panel connected
> with i.MX8MP EVK board does not show any data on screen.

I send exactly the same change yesterday:
[PATCH] drm: bridge: ldb: Drop DE flip from Freescale i.MX8MP LDB bridge

So either can be applied.

Reviewed-by: Marek Vasut <marex@denx.de>

^ permalink raw reply	[flat|nested] 20+ messages in thread
* Re: [PATCH 0/3] drm/bridge: fsl-ldb: A few fixes
  2022-07-01  6:56 ` Liu Ying
@ 2022-07-04 14:24   ` Neil Armstrong
  -1 siblings, 0 replies; 20+ messages in thread
From: Neil Armstrong @ 2022-07-04 14:24 UTC (permalink / raw)
  To: linux-kernel, Liu Ying, dri-devel
  Cc: Neil Armstrong, Laurent.pinchart, sam, airlied, marex,
	andrzej.hajda, robert.foss, linux-imx, jernej.skrabec, daniel,
	jonas

Hi,

On Fri, 1 Jul 2022 14:56:31 +0800, Liu Ying wrote:
> This series contains three fixes for the fsl-ldb bridge driver.
> 
> Patch 1/3 fixes mode clock rate validation.
> Patch 2/3 fixes LVDS dual link mode.
> Patch 3/3 fixes input data enable signal polarity.
> 
> Liu Ying (3):
>   drm/bridge: fsl-ldb: Fix mode clock rate validation
>   drm/bridge: fsl-ldb: Enable split mode for LVDS dual link
>   drm/bridge: fsl-ldb: Drop DE signal polarity inversion
> 
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-fixes)

[1/3] drm/bridge: fsl-ldb: Fix mode clock rate validation
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=591129d3db266648823bb953ebbc28c92e059bf3
[2/3] drm/bridge: fsl-ldb: Enable split mode for LVDS dual link
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=57ef278ef125e9188474a164f35dcffc69836d01
[3/3] drm/bridge: fsl-ldb: Drop DE signal polarity inversion
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=1dbc790b4d416dacb124a6acd05f88a0bcf3be39

-- 
Neil

^ permalink raw reply	[flat|nested] 20+ messages in thread
* Re: [PATCH 0/3] drm/bridge: fsl-ldb: A few fixes
@ 2022-07-04 14:24   ` Neil Armstrong
  0 siblings, 0 replies; 20+ messages in thread
From: Neil Armstrong @ 2022-07-04 14:24 UTC (permalink / raw)
  To: linux-kernel, Liu Ying, dri-devel
  Cc: marex, jernej.skrabec, Neil Armstrong, airlied, jonas,
	robert.foss, Laurent.pinchart, andrzej.hajda, sam, linux-imx

Hi,

On Fri, 1 Jul 2022 14:56:31 +0800, Liu Ying wrote:
> This series contains three fixes for the fsl-ldb bridge driver.
> 
> Patch 1/3 fixes mode clock rate validation.
> Patch 2/3 fixes LVDS dual link mode.
> Patch 3/3 fixes input data enable signal polarity.
> 
> Liu Ying (3):
>   drm/bridge: fsl-ldb: Fix mode clock rate validation
>   drm/bridge: fsl-ldb: Enable split mode for LVDS dual link
>   drm/bridge: fsl-ldb: Drop DE signal polarity inversion
> 
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-fixes)

[1/3] drm/bridge: fsl-ldb: Fix mode clock rate validation
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=591129d3db266648823bb953ebbc28c92e059bf3
[2/3] drm/bridge: fsl-ldb: Enable split mode for LVDS dual link
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=57ef278ef125e9188474a164f35dcffc69836d01
[3/3] drm/bridge: fsl-ldb: Drop DE signal polarity inversion
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=1dbc790b4d416dacb124a6acd05f88a0bcf3be39

-- 
Neil

^ permalink raw reply	[flat|nested] 20+ messages in thread
* Re: [PATCH 1/3] drm/bridge: fsl-ldb: Fix mode clock rate validation
  2022-07-01  8:02     ` Marek Vasut
@ 2022-07-06 13:34       ` Robert Foss
  -1 siblings, 0 replies; 20+ messages in thread
From: Robert Foss @ 2022-07-06 13:34 UTC (permalink / raw)
  To: Marek Vasut
  Cc: Liu Ying, dri-devel, linux-kernel, andrzej.hajda, narmstrong,
	Laurent.pinchart, jonas, jernej.skrabec, airlied, daniel, sam,
	linux-imx

On Fri, 1 Jul 2022 at 13:00, Marek Vasut <marex@denx.de> wrote:
>
> On 7/1/22 08:56, Liu Ying wrote:
> > With LVDS dual link, up to 160MHz mode clock rate is supported.
> > With LVDS single link, up to 80MHz mode clock rate is supported.
> > Fix mode clock rate validation by swapping the maximum mode clock
> > rates of the two link modes.
> >
> > Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
> > Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> > Cc: Neil Armstrong <narmstrong@baylibre.com>
> > Cc: Robert Foss <robert.foss@linaro.org>
> > Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> > Cc: Jonas Karlman <jonas@kwiboo.se>
> > Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
> > Cc: David Airlie <airlied@linux.ie>
> > Cc: Daniel Vetter <daniel@ffwll.ch>
> > Cc: Sam Ravnborg <sam@ravnborg.org>
> > Cc: Marek Vasut <marex@denx.de>
> > Cc: NXP Linux Team <linux-imx@nxp.com>
> > Signed-off-by: Liu Ying <victor.liu@nxp.com>
>
> Reviewed-by: Marek Vasut <marex@denx.de>

Applied 1-2/3 to drm-misc-next. Picked Mareks patch for 3/3 since it
was submitted first and is identical.

^ permalink raw reply	[flat|nested] 20+ messages in thread
* Re: [PATCH 1/3] drm/bridge: fsl-ldb: Fix mode clock rate validation
@ 2022-07-06 13:34       ` Robert Foss
  0 siblings, 0 replies; 20+ messages in thread
From: Robert Foss @ 2022-07-06 13:34 UTC (permalink / raw)
  To: Marek Vasut
  Cc: jernej.skrabec, narmstrong, Liu Ying, jonas, linux-kernel,
	dri-devel, airlied, Laurent.pinchart, andrzej.hajda, sam,
	linux-imx

On Fri, 1 Jul 2022 at 13:00, Marek Vasut <marex@denx.de> wrote:
>
> On 7/1/22 08:56, Liu Ying wrote:
> > With LVDS dual link, up to 160MHz mode clock rate is supported.
> > With LVDS single link, up to 80MHz mode clock rate is supported.
> > Fix mode clock rate validation by swapping the maximum mode clock
> > rates of the two link modes.
> >
> > Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
> > Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> > Cc: Neil Armstrong <narmstrong@baylibre.com>
> > Cc: Robert Foss <robert.foss@linaro.org>
> > Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> > Cc: Jonas Karlman <jonas@kwiboo.se>
> > Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
> > Cc: David Airlie <airlied@linux.ie>
> > Cc: Daniel Vetter <daniel@ffwll.ch>
> > Cc: Sam Ravnborg <sam@ravnborg.org>
> > Cc: Marek Vasut <marex@denx.de>
> > Cc: NXP Linux Team <linux-imx@nxp.com>
> > Signed-off-by: Liu Ying <victor.liu@nxp.com>
>
> Reviewed-by: Marek Vasut <marex@denx.de>

Applied 1-2/3 to drm-misc-next. Picked Mareks patch for 3/3 since it
was submitted first and is identical.

^ permalink raw reply	[flat|nested] 20+ messages in thread
* Re: [PATCH 1/3] drm/bridge: fsl-ldb: Fix mode clock rate validation
  2022-07-06 13:34       ` Robert Foss
@ 2022-07-07  8:12         ` Neil Armstrong
  -1 siblings, 0 replies; 20+ messages in thread
From: Neil Armstrong @ 2022-07-07  8:12 UTC (permalink / raw)
  To: Robert Foss, Marek Vasut
  Cc: jernej.skrabec, jonas, Liu Ying, linux-kernel, dri-devel,
	airlied, Laurent.pinchart, andrzej.hajda, sam, linux-imx

Hi,

On 06/07/2022 15:34, Robert Foss wrote:
> On Fri, 1 Jul 2022 at 13:00, Marek Vasut <marex@denx.de> wrote:
>>
>> On 7/1/22 08:56, Liu Ying wrote:
>>> With LVDS dual link, up to 160MHz mode clock rate is supported.
>>> With LVDS single link, up to 80MHz mode clock rate is supported.
>>> Fix mode clock rate validation by swapping the maximum mode clock
>>> rates of the two link modes.
>>>
>>> Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
>>> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
>>> Cc: Neil Armstrong <narmstrong@baylibre.com>
>>> Cc: Robert Foss <robert.foss@linaro.org>
>>> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
>>> Cc: Jonas Karlman <jonas@kwiboo.se>
>>> Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
>>> Cc: David Airlie <airlied@linux.ie>
>>> Cc: Daniel Vetter <daniel@ffwll.ch>
>>> Cc: Sam Ravnborg <sam@ravnborg.org>
>>> Cc: Marek Vasut <marex@denx.de>
>>> Cc: NXP Linux Team <linux-imx@nxp.com>
>>> Signed-off-by: Liu Ying <victor.liu@nxp.com>
>>
>> Reviewed-by: Marek Vasut <marex@denx.de>
> 
> Applied 1-2/3 to drm-misc-next. Picked Mareks patch for 3/3 since it
> was submitted first and is identical.

Seems we'll have a conflict when drm-misc-fixes is backmerged in drm-misc-next !

Neil

^ permalink raw reply	[flat|nested] 20+ messages in thread
* Re: [PATCH 1/3] drm/bridge: fsl-ldb: Fix mode clock rate validation
@ 2022-07-07  8:12         ` Neil Armstrong
  0 siblings, 0 replies; 20+ messages in thread
From: Neil Armstrong @ 2022-07-07  8:12 UTC (permalink / raw)
  To: Robert Foss, Marek Vasut
  Cc: Liu Ying, dri-devel, linux-kernel, andrzej.hajda,
	Laurent.pinchart, jonas, jernej.skrabec, airlied, daniel, sam,
	linux-imx

Hi,

On 06/07/2022 15:34, Robert Foss wrote:
> On Fri, 1 Jul 2022 at 13:00, Marek Vasut <marex@denx.de> wrote:
>>
>> On 7/1/22 08:56, Liu Ying wrote:
>>> With LVDS dual link, up to 160MHz mode clock rate is supported.
>>> With LVDS single link, up to 80MHz mode clock rate is supported.
>>> Fix mode clock rate validation by swapping the maximum mode clock
>>> rates of the two link modes.
>>>
>>> Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
>>> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
>>> Cc: Neil Armstrong <narmstrong@baylibre.com>
>>> Cc: Robert Foss <robert.foss@linaro.org>
>>> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
>>> Cc: Jonas Karlman <jonas@kwiboo.se>
>>> Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
>>> Cc: David Airlie <airlied@linux.ie>
>>> Cc: Daniel Vetter <daniel@ffwll.ch>
>>> Cc: Sam Ravnborg <sam@ravnborg.org>
>>> Cc: Marek Vasut <marex@denx.de>
>>> Cc: NXP Linux Team <linux-imx@nxp.com>
>>> Signed-off-by: Liu Ying <victor.liu@nxp.com>
>>
>> Reviewed-by: Marek Vasut <marex@denx.de>
> 
> Applied 1-2/3 to drm-misc-next. Picked Mareks patch for 3/3 since it
> was submitted first and is identical.

Seems we'll have a conflict when drm-misc-fixes is backmerged in drm-misc-next !

Neil

^ permalink raw reply	[flat|nested] 20+ messages in thread
end of thread, other threads:[~2022-07-07  8:12 UTC | newest]

Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-07-01  6:56 [PATCH 0/3] drm/bridge: fsl-ldb: A few fixes Liu Ying
2022-07-01  6:56 ` Liu Ying
2022-07-01  6:56 ` [PATCH 1/3] drm/bridge: fsl-ldb: Fix mode clock rate validation Liu Ying
2022-07-01  6:56   ` Liu Ying
2022-07-01  8:02   ` Marek Vasut
2022-07-01  8:02     ` Marek Vasut
2022-07-06 13:34     ` Robert Foss
2022-07-06 13:34       ` Robert Foss
2022-07-07  8:12       ` Neil Armstrong
2022-07-07  8:12         ` Neil Armstrong
2022-07-01  6:56 ` [PATCH 2/3] drm/bridge: fsl-ldb: Enable split mode for LVDS dual link Liu Ying
2022-07-01  6:56   ` Liu Ying
2022-07-01  8:02   ` Marek Vasut
2022-07-01  8:02     ` Marek Vasut
2022-07-01  6:56 ` [PATCH 3/3] drm/bridge: fsl-ldb: Drop DE signal polarity inversion Liu Ying
2022-07-01  6:56   ` Liu Ying
2022-07-01  8:03   ` Marek Vasut
2022-07-01  8:03     ` Marek Vasut
2022-07-04 14:24 ` [PATCH 0/3] drm/bridge: fsl-ldb: A few fixes Neil Armstrong
2022-07-04 14:24   ` Neil Armstrong

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.