[PATCH v2 0/6] Add support for RZ/N1 SJA1000 CAN controller

[PATCH v2 0/6] Add support for RZ/N1 SJA1000 CAN controller

[Biju Das]

This patch series aims to add support for RZ/N1 SJA1000 CAN controller.

The SJA1000 CAN controller on RZ/N1 SoC has some differences compared
to others like it has no clock divider register (CDR) support and it has
no HW loopback (HW doesn't see tx messages on rx), so introduced a new
compatible 'renesas,rzn1-sja1000' to handle these differences.

v1->v2:
 * Moved $ref: can-controller.yaml# to top along with if conditional to
   avoid multiple mapping issues with the if conditional in the subsequent
   patch.
 * Added an example for RZ/N1D SJA1000 usage.
 * Updated commit description for patch#2,#3 and #6
 * Removed the quirk macro SJA1000_NO_HW_LOOPBACK_QUIRK
 * Added prefix SJA1000_QUIRK_* for quirk macro.
 * Replaced of_device_get_match_data->device_get_match_data.
 * Added error handling on clk error path
 * Started using "devm_clk_get_optional_enabled" for clk get,prepare and enable.

Ref:
 [1] https://lore.kernel.org/linux-renesas-soc/20220701162320.102165-1-biju.das.jz@bp.renesas.com/T/#t

Biju Das (6):
  dt-bindings: can: sja1000: Convert to json-schema
  dt-bindings: can: nxp,sja1000: Document RZ/N1{D,S} support
  can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller
  can: sja1000: Use device_get_match_data to get device data
  can: sja1000: Change the return type as void for SoC specific init
  can: sja1000: Add support for RZ/N1 SJA1000 CAN Controller

 .../bindings/net/can/nxp,sja1000.yaml         | 136 ++++++++++++++++++
 .../devicetree/bindings/net/can/sja1000.txt   |  58 --------
 drivers/net/can/sja1000/sja1000.c             |  13 +-
 drivers/net/can/sja1000/sja1000.h             |   3 +-
 drivers/net/can/sja1000/sja1000_platform.c    |  56 +++++---
 5 files changed, 184 insertions(+), 82 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/can/sja1000.txt

-- 
2.25.1

[PATCH v2 1/6] dt-bindings: can: sja1000: Convert to json-schema

[Biju Das]

Convert the NXP SJA1000 CAN Controller Device Tree binding
documentation to json-schema.

Update the example to match reality.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2:
 * Moved $ref: can-controller.yaml# to top along with if conditional to
   avoid multiple mapping issues with the if conditional in the subsequent
   patch.
---
 .../bindings/net/can/nxp,sja1000.yaml         | 102 ++++++++++++++++++
 .../devicetree/bindings/net/can/sja1000.txt   |  58 ----------
 2 files changed, 102 insertions(+), 58 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/can/sja1000.txt

diff --git a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
new file mode 100644
index 000000000000..3232ce7e2642
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/nxp,sja1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
+
+maintainers:
+  - Wolfgang Grandegger <wg@grandegger.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: technologic,sja1000
+    then:
+      required:
+        - reg-io-width
+
+properties:
+  compatible:
+    oneOf:
+      - description: NXP SJA1000 CAN Controller
+        const: nxp,sja1000
+      - description: Technologic Systems SJA1000 CAN Controller
+        const: technologic,sja1000
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg-io-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: I/O register width (in bytes) implemented by this device
+    default: 1
+    enum: [ 1, 2, 4 ]
+
+  nxp,external-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 16000000
+    description: |
+      Frequency of the external oscillator clock in Hz.
+      The internal clock frequency used by the SJA1000 is half of that value.
+
+  nxp,tx-output-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+    default: 1
+    description: |
+      operation mode of the TX output control logic.  Valid values are:
+        <0x0> : bi-phase output mode
+        <0x1> : normal output mode (default)
+        <0x2> : test output mode
+        <0x3> : clock output mode
+
+  nxp,tx-output-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0x01, 0x02, 0x04, 0x06, 0x08, 0x10, 0x20, 0x30 ]
+    default: 0x02
+    description: |
+      TX output pin configuration.  Valid values are:
+        <0x01> : TX0 invert
+        <0x02> : TX0 pull-down (default)
+        <0x04> : TX0 pull-up
+        <0x06> : TX0 push-pull
+        <0x08> : TX1 invert
+        <0x10> : TX1 pull-down
+        <0x20> : TX1 pull-up
+        <0x30> : TX1 push-pull
+
+  nxp,clock-out-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      clock frequency in Hz on the CLKOUT pin.
+      If not specified or if the specified value is 0, the CLKOUT pin
+      will be disabled.
+
+  nxp,no-comparator-bypass:
+    type: boolean
+    description: Allows to disable the CAN input comparator.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    can@1a000 {
+            compatible = "technologic,sja1000";
+            reg = <0x1a000 0x100>;
+            interrupts = <1>;
+            nxp,external-clock-frequency = <24000000>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/sja1000.txt b/Documentation/devicetree/bindings/net/can/sja1000.txt
deleted file mode 100644
index ac3160eca96a..000000000000
--- a/Documentation/devicetree/bindings/net/can/sja1000.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
-
-Required properties:
-
-- compatible : should be one of "nxp,sja1000", "technologic,sja1000".
-
-- reg : should specify the chip select, address offset and size required
-	to map the registers of the SJA1000. The size is usually 0x80.
-
-- interrupts: property with a value describing the interrupt source
-	(number and sensitivity) required for the SJA1000.
-
-Optional properties:
-
-- reg-io-width : Specify the size (in bytes) of the IO accesses that
-	should be performed on the device.  Valid value is 1, 2 or 4.
-	This property is ignored for technologic version.
-	Default to 1 (8 bits).
-
-- nxp,external-clock-frequency : Frequency of the external oscillator
-	clock in Hz. Note that the internal clock frequency used by the
-	SJA1000 is half of that value. If not specified, a default value
-	of 16000000 (16 MHz) is used.
-
-- nxp,tx-output-mode : operation mode of the TX output control logic:
-	<0x0> : bi-phase output mode
-	<0x1> : normal output mode (default)
-	<0x2> : test output mode
-	<0x3> : clock output mode
-
-- nxp,tx-output-config : TX output pin configuration:
-	<0x01> : TX0 invert
-	<0x02> : TX0 pull-down (default)
-	<0x04> : TX0 pull-up
-	<0x06> : TX0 push-pull
-	<0x08> : TX1 invert
-	<0x10> : TX1 pull-down
-	<0x20> : TX1 pull-up
-	<0x30> : TX1 push-pull
-
-- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin.
-	If not specified or if the specified value is 0, the CLKOUT pin
-	will be disabled.
-
-- nxp,no-comparator-bypass : Allows to disable the CAN input comparator.
-
-For further information, please have a look to the SJA1000 data sheet.
-
-Examples:
-
-can@3,100 {
-	compatible = "nxp,sja1000";
-	reg = <3 0x100 0x80>;
-	interrupts = <2 0>;
-	interrupt-parent = <&mpic>;
-	nxp,external-clock-frequency = <16000000>;
-};
-
-- 
2.25.1

[PATCH v2 2/6] dt-bindings: can: nxp,sja1000: Document RZ/N1{D,S} support

[Biju Das]

Add CAN binding documentation for Renesas RZ/N1 SoC.

The SJA1000 CAN controller on RZ/N1 SoC has some differences compared
to others like it has no clock divider register (CDR) support and it has
no HW loopback (HW doesn't see tx messages on rx), so introduced a new
compatible 'renesas,rzn1-sja1000' to handle these differences.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2:
 * Updated commit description.
 * Added an example for RZ/N1D SJA1000 usage
---
 .../bindings/net/can/nxp,sja1000.yaml         | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
index 3232ce7e2642..dca2c932df31 100644
--- a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
+++ b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
@@ -20,6 +20,15 @@ allOf:
     then:
       required:
         - reg-io-width
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzn1-sja1000
+    then:
+      required:
+        - clocks
+        - clock-names
 
 properties:
   compatible:
@@ -28,6 +37,12 @@ properties:
         const: nxp,sja1000
       - description: Technologic Systems SJA1000 CAN Controller
         const: technologic,sja1000
+      - description: Renesas RZ/N1 SJA1000 CAN Controller
+        items:
+          - enum:
+              - renesas,r9a06g032-sja1000 # RZ/N1D
+              - renesas,r9a06g033-sja1000 # RZ/N1S
+          - const: renesas,rzn1-sja1000 # RZ/N1
 
   reg:
     maxItems: 1
@@ -35,6 +50,12 @@ properties:
   interrupts:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: can_clk
+
   reg-io-width:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: I/O register width (in bytes) implemented by this device
@@ -100,3 +121,16 @@ examples:
             interrupts = <1>;
             nxp,external-clock-frequency = <24000000>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    can@52104000 {
+            compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000";
+            reg = <0x52104000 0x800>;
+            reg-io-width = <4>;
+            interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&sysctrl R9A06G032_HCLK_CAN0>;
+            clock-names = "can_clk";
+    };
-- 
2.25.1

[PATCH v2 3/6] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller

[Biju Das]

As per Chapter 6.5.16 of the RZ/N1 Peripheral Manual, The SJA1000
CAN controller does not support Clock Divider Register compared to
the reference Philips SJA1000 device.

This patch adds a device quirk to handle this difference.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2:
 * Updated commit description
 * Removed the quirk macro SJA1000_NO_HW_LOOPBACK_QUIRK
 * Added prefix SJA1000_QUIRK_* for quirk macro.
---
 drivers/net/can/sja1000/sja1000.c | 13 ++++++++-----
 drivers/net/can/sja1000/sja1000.h |  3 ++-
 2 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 2e7638f98cf1..e9c55f5aa3c3 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -183,8 +183,9 @@ static void chipset_init(struct net_device *dev)
 {
 	struct sja1000_priv *priv = netdev_priv(dev);
 
-	/* set clock divider and output control register */
-	priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
+	if (!(priv->flags & SJA1000_QUIRK_NO_CDR_REG))
+		/* set clock divider and output control register */
+		priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
 
 	/* set acceptance filter (accept all) */
 	priv->write_reg(priv, SJA1000_ACCC0, 0x00);
@@ -208,9 +209,11 @@ static void sja1000_start(struct net_device *dev)
 	if (priv->can.state != CAN_STATE_STOPPED)
 		set_reset_mode(dev);
 
-	/* Initialize chip if uninitialized at this stage */
-	if (!(priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN))
-		chipset_init(dev);
+	if (!(priv->flags & SJA1000_QUIRK_NO_CDR_REG)) {
+		/* Initialize chip if uninitialized at this stage */
+		if (!(priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN))
+			chipset_init(dev);
+	}
 
 	/* Clear error counters and error code capture */
 	priv->write_reg(priv, SJA1000_TXERR, 0x0);
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index 9d46398f8154..7f736f1df547 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -145,7 +145,8 @@
 /*
  * Flags for sja1000priv.flags
  */
-#define SJA1000_CUSTOM_IRQ_HANDLER 0x1
+#define SJA1000_CUSTOM_IRQ_HANDLER	BIT(0)
+#define SJA1000_QUIRK_NO_CDR_REG	BIT(1)
 
 /*
  * SJA1000 private data structure
-- 
2.25.1

[PATCH v2 4/6] can: sja1000: Use device_get_match_data to get device data

[Biju Das]

This patch replaces of_match_device->device_get_match_data
to get pointer to device data.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2:
 * Replaced of_device_get_match_data->device_get_match_data.
---
 drivers/net/can/sja1000/sja1000_platform.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c
index f9ec7bd8dfac..0b78568f5286 100644
--- a/drivers/net/can/sja1000/sja1000_platform.c
+++ b/drivers/net/can/sja1000/sja1000_platform.c
@@ -210,7 +210,6 @@ static int sp_probe(struct platform_device *pdev)
 	struct resource *res_mem, *res_irq = NULL;
 	struct sja1000_platform_data *pdata;
 	struct device_node *of = pdev->dev.of_node;
-	const struct of_device_id *of_id;
 	const struct sja1000_of_data *of_data = NULL;
 	size_t priv_sz = 0;
 
@@ -243,11 +242,9 @@ static int sp_probe(struct platform_device *pdev)
 			return -ENODEV;
 	}
 
-	of_id = of_match_device(sp_of_table, &pdev->dev);
-	if (of_id && of_id->data) {
-		of_data = of_id->data;
+	of_data = device_get_match_data(&pdev->dev);
+	if (of_data)
 		priv_sz = of_data->priv_sz;
-	}
 
 	dev = alloc_sja1000dev(priv_sz);
 	if (!dev)
-- 
2.25.1

[PATCH v2 5/6] can: sja1000: Change the return type as void for SoC specific init

[Biju Das]

Change the return type as void for SoC specific init function as it
always return 0.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2:
 * No change.
---
 drivers/net/can/sja1000/sja1000_platform.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c
index 0b78568f5286..81bc741905fd 100644
--- a/drivers/net/can/sja1000/sja1000_platform.c
+++ b/drivers/net/can/sja1000/sja1000_platform.c
@@ -31,7 +31,7 @@ MODULE_LICENSE("GPL v2");
 
 struct sja1000_of_data {
 	size_t  priv_sz;
-	int     (*init)(struct sja1000_priv *priv, struct device_node *of);
+	void    (*init)(struct sja1000_priv *priv, struct device_node *of);
 };
 
 struct technologic_priv {
@@ -94,15 +94,13 @@ static void sp_technologic_write_reg16(const struct sja1000_priv *priv,
 	spin_unlock_irqrestore(&tp->io_lock, flags);
 }
 
-static int sp_technologic_init(struct sja1000_priv *priv, struct device_node *of)
+static void sp_technologic_init(struct sja1000_priv *priv, struct device_node *of)
 {
 	struct technologic_priv *tp = priv->priv;
 
 	priv->read_reg = sp_technologic_read_reg16;
 	priv->write_reg = sp_technologic_write_reg16;
 	spin_lock_init(&tp->io_lock);
-
-	return 0;
 }
 
 static void sp_populate(struct sja1000_priv *priv,
@@ -266,11 +264,8 @@ static int sp_probe(struct platform_device *pdev)
 	if (of) {
 		sp_populate_of(priv, of);
 
-		if (of_data && of_data->init) {
-			err = of_data->init(priv, of);
-			if (err)
-				goto exit_free;
-		}
+		if (of_data && of_data->init)
+			of_data->init(priv, of);
 	} else {
 		sp_populate(priv, pdata, res_mem->flags);
 	}
-- 
2.25.1

[PATCH v2 6/6] can: sja1000: Add support for RZ/N1 SJA1000 CAN Controller

[Biju Das]

The SJA1000 CAN controller on RZ/N1 SoC has no clock divider register
(CDR) support compared to others.

This patch adds support for RZ/N1 SJA1000 CAN Controller.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2:
 * Updated commit description as SJA1000_NO_HW_LOOPBACK_QUIRK is removed
 * Added error handling on clk error path
 * Started using "devm_clk_get_optional_enabled" for clk get,prepare and enable.
---
 drivers/net/can/sja1000/sja1000_platform.c | 38 +++++++++++++++++++---
 1 file changed, 33 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c
index 81bc741905fd..757fdb5da191 100644
--- a/drivers/net/can/sja1000/sja1000_platform.c
+++ b/drivers/net/can/sja1000/sja1000_platform.c
@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/can/dev.h>
 #include <linux/can/platform/sja1000.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -103,6 +104,11 @@ static void sp_technologic_init(struct sja1000_priv *priv, struct device_node *o
 	spin_lock_init(&tp->io_lock);
 }
 
+static void sp_rzn1_init(struct sja1000_priv *priv, struct device_node *of)
+{
+	priv->flags = SJA1000_QUIRK_NO_CDR_REG;
+}
+
 static void sp_populate(struct sja1000_priv *priv,
 			struct sja1000_platform_data *pdata,
 			unsigned long resource_mem_flags)
@@ -153,11 +159,13 @@ static void sp_populate_of(struct sja1000_priv *priv, struct device_node *of)
 		priv->write_reg = sp_write_reg8;
 	}
 
-	err = of_property_read_u32(of, "nxp,external-clock-frequency", &prop);
-	if (!err)
-		priv->can.clock.freq = prop / 2;
-	else
-		priv->can.clock.freq = SP_CAN_CLOCK; /* default */
+	if (!priv->can.clock.freq) {
+		err = of_property_read_u32(of, "nxp,external-clock-frequency", &prop);
+		if (!err)
+			priv->can.clock.freq = prop / 2;
+		else
+			priv->can.clock.freq = SP_CAN_CLOCK; /* default */
+	}
 
 	err = of_property_read_u32(of, "nxp,tx-output-mode", &prop);
 	if (!err)
@@ -192,8 +200,13 @@ static struct sja1000_of_data technologic_data = {
 	.init = sp_technologic_init,
 };
 
+static struct sja1000_of_data renesas_data = {
+	.init = sp_rzn1_init,
+};
+
 static const struct of_device_id sp_of_table[] = {
 	{ .compatible = "nxp,sja1000", .data = NULL, },
+	{ .compatible = "renesas,rzn1-sja1000", .data = &renesas_data, },
 	{ .compatible = "technologic,sja1000", .data = &technologic_data, },
 	{ /* sentinel */ },
 };
@@ -210,6 +223,7 @@ static int sp_probe(struct platform_device *pdev)
 	struct device_node *of = pdev->dev.of_node;
 	const struct sja1000_of_data *of_data = NULL;
 	size_t priv_sz = 0;
+	struct clk *clk;
 
 	pdata = dev_get_platdata(&pdev->dev);
 	if (!pdata && !of) {
@@ -234,6 +248,11 @@ static int sp_probe(struct platform_device *pdev)
 		irq = platform_get_irq(pdev, 0);
 		if (irq < 0)
 			return irq;
+
+		clk = devm_clk_get_optional_enabled(&pdev->dev, "can_clk");
+		if (IS_ERR(clk))
+			return dev_err_probe(&pdev->dev, PTR_ERR(clk),
+					     "CAN clk operation failed");
 	} else {
 		res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 		if (!res_irq)
@@ -262,6 +281,15 @@ static int sp_probe(struct platform_device *pdev)
 	priv->reg_base = addr;
 
 	if (of) {
+		if (clk) {
+			priv->can.clock.freq  = clk_get_rate(clk) / 2;
+			if (!priv->can.clock.freq) {
+				err = -EINVAL;
+				dev_err(&pdev->dev, "Zero CAN clk rate");
+				goto exit_free;
+			}
+		}
+
 		sp_populate_of(priv, of);
 
 		if (of_data && of_data->init)
-- 
2.25.1

Re: [PATCH v2 1/6] dt-bindings: can: sja1000: Convert to json-schema

[Rob Herring]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1361 bytes --]

On Sun, 03 Jul 2022 11:47:00 +0100, Biju Das wrote:
> Convert the NXP SJA1000 CAN Controller Device Tree binding
> documentation to json-schema.
> 
> Update the example to match reality.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> v1->v2:
>  * Moved $ref: can-controller.yaml# to top along with if conditional to
>    avoid multiple mapping issues with the if conditional in the subsequent
>    patch.
> ---
>  .../bindings/net/can/nxp,sja1000.yaml         | 102 ++++++++++++++++++
>  .../devicetree/bindings/net/can/sja1000.txt   |  58 ----------
>  2 files changed, 102 insertions(+), 58 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
>  delete mode 100644 Documentation/devicetree/bindings/net/can/sja1000.txt
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


can@4,0: nxp,tx-output-config:0:0: 22 is not one of [1, 2, 4, 6, 8, 16, 32, 48]
	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dtb

can@4,0: 'reg-io-width' is a required property
	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dtb

RE: [PATCH v2 1/6] dt-bindings: can: sja1000: Convert to json-schema

[Biju Das]

Hi Rob,

Thanks for the feedback.

> Subject: Re: [PATCH v2 1/6] dt-bindings: can: sja1000: Convert to json-
> schema
> 
> On Sun, 03 Jul 2022 11:47:00 +0100, Biju Das wrote:
> > Convert the NXP SJA1000 CAN Controller Device Tree binding
> > documentation to json-schema.
> >
> > Update the example to match reality.
> >
> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > ---
> > v1->v2:
> >  * Moved $ref: can-controller.yaml# to top along with if conditional
> > to    avoid multiple mapping issues with the if conditional in the
> subsequent
> >    patch.
> > ---
> >  .../bindings/net/can/nxp,sja1000.yaml         | 102
> ++++++++++++++++++
> >  .../devicetree/bindings/net/can/sja1000.txt   |  58 ----------
> >  2 files changed, 102 insertions(+), 58 deletions(-)  create mode
> > 100644 Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
> >  delete mode 100644
> > Documentation/devicetree/bindings/net/can/sja1000.txt
> >
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
>

OK.
 
> 
> can@4,0: nxp,tx-output-config:0:0: 22 is not one of [1, 2, 4, 6, 8, 16,
> 32, 48]
> 	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dtb

Looks like this property is not enum, as combination possible with tx-output-config values for TX0 and TX1. 

22 = 6 + 16 -> TX0 push-pull + TX1 pull-down

I will remove enums definition from the next version.
which will fix this error. 

Also please let me know, is there any better way to handle
combination of enum values like above.

> 
> can@4,0: 'reg-io-width' is a required property
> 	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dtb

I have added this as per original documentation[1], it is ignored only for
Technologic. But after checking [2] none of them except Technologic is using reg-io
I will send V3 with fixing this.

[1] snippet from original bindings.
Optional properties:
reg-io-width : Specify the size (in bytes) of the IO accesses that
	should be performed on the device.  Valid value is 1, 2 or 4.
	This property is ignored for technologic version.
	Default to 1 (8 bits).

[2]
biju@biju-VirtualBox:~/linux-next$ fgrep -r "sja1000" arch
arch/powerpc/boot/dts/digsy_mtc.dts:			compatible = "nxp,sja1000";
arch/powerpc/boot/dts/digsy_mtc.dts:			compatible = "nxp,sja1000";
arch/powerpc/boot/dts/socrates.dts:			compatible = "philips,sja1000";
Binary file arch/arm/boot/dts/imx51-ts4800.dtb matches
arch/arm/boot/dts/imx51-ts4800.dts:			compatible = "technologic,sja1000";
arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts:		compatible = "nxp,sja1000";

Cheers,
Biju