[PATCH v8 01/15] dt-bindings: clk: imx: Add fsl,scu-clk yaml file

["Viorel Suman (OSS)" <viorel.suman@oss.nxp.com>]

From: Abel Vesa <abel.vesa@nxp.com>

In order to replace the fsl,scu txt file from bindings/arm/freescale,
we need to split it between the right subsystems. This patch documents
separately the 'clock' child node of the SCU main node.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/arm/freescale/fsl,scu.txt        | 31 -------------
 .../bindings/clock/fsl,scu-clk.yaml           | 43 +++++++++++++++++++
 2 files changed, 43 insertions(+), 31 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index a87ec15e28d2..ef7f5222ac48 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -79,29 +79,6 @@ Required properties:
 			See detailed Resource ID list from:
 			include/dt-bindings/firmware/imx/rsrc.h
 
-Clock bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding uses the common clock binding[1].
-
-Required properties:
-- compatible:		Should be one of:
-			  "fsl,imx8dxl-clk"
-			  "fsl,imx8qm-clk"
-			  "fsl,imx8qxp-clk"
-			followed by "fsl,scu-clk"
-- #clock-cells:		Should be 2.
-			Contains the Resource and Clock ID value.
-- clocks:		List of clock specifiers, must contain an entry for
-			each required entry in clock-names
-- clock-names:		Should include entries "xtal_32KHz", "xtal_24MHz"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-
-See the full list of clock IDs from:
-include/dt-bindings/clock/imx8qxp-clock.h
-
 Pinctrl bindings based on SCU Message Protocol
 ------------------------------------------------------------
 
@@ -127,7 +104,6 @@ Required properties for Pinctrl sub nodes:
 			Please refer to i.MX8QXP Reference Manual for detailed
 			CONFIG settings.
 
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/power/power-domain.yaml
 [3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
 
@@ -208,11 +184,6 @@ firmware {
 			  &lsio_mu1 1 3
 			  &lsio_mu1 3 3>;
 
-		clk: clk {
-			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
-			#clock-cells = <2>;
-		};
-
 		iomuxc {
 			compatible = "fsl,imx8qxp-iomuxc";
 
@@ -265,7 +236,5 @@ serial@5a060000 {
 	...
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpuart0>;
-	clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
-	clock-names = "ipg";
 	power-domains = <&pd IMX_SC_R_UART_0>;
 };
diff --git a/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
new file mode 100644
index 000000000000..f2c48460a399
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Clock bindings based on SCU Message Protocol
+
+maintainers:
+  - Abel Vesa <abel.vesa@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  This binding uses the common clock binding.
+  (Documentation/devicetree/bindings/clock/clock-bindings.txt)
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See the full list of clock IDs from
+  include/dt-bindings/clock/imx8qxp-clock.h
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8dxl-clk
+          - fsl,imx8qm-clk
+          - fsl,imx8qxp-clk
+      - const: fsl,scu-clk
+
+  '#clock-cells':
+    const: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+        compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+        #clock-cells = <2>;
+    };
-- 
2.25.1