From: Tanmay Shah <tanmay.shah@amd.com> To: <bjorn.andersson@linaro.org>, <mathieu.poirier@linaro.org>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <michal.simek@xilinx.com>, <ben.levinsky@xilinx.com>, <tanmay.shah@xilinx.com>, <michal.simek@amd.com> Cc: <linux-remoteproc@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, Tanmay Shah <tanmay.shah@amd.com> Subject: [PATCH v9 3/6] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration. Date: Thu, 7 Jul 2022 18:39:52 -0700 [thread overview] Message-ID: <20220708013955.2340449-4-tanmay.shah@amd.com> (raw) In-Reply-To: <20220708013955.2340449-1-tanmay.shah@amd.com> From: Ben Levinsky <ben.levinsky@xilinx.com> Add ZynqMP firmware ioctl enums for RPU configuration and TCM Nodes for later use via request_node and release_node Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com> Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com> Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> --- Changes in v9: - None Changes in v8: - None Changes in v7: - None Changes in v6: - None Changes in v5: - None Changes in v4: - None Changes in v3: - None include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 1ec73d5352c3..31386c82411a 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -134,6 +134,10 @@ enum pm_ret_status { }; enum pm_ioctl_id { + IOCTL_GET_RPU_OPER_MODE = 0, + IOCTL_SET_RPU_OPER_MODE = 1, + IOCTL_RPU_BOOT_ADDR_CONFIG = 2, + IOCTL_TCM_COMB_CONFIG = 3, IOCTL_SD_DLL_RESET = 6, IOCTL_SET_SD_TAPDELAY = 7, IOCTL_SET_PLL_FRAC_MODE = 8, @@ -171,6 +175,21 @@ enum pm_query_id { PM_QID_CLOCK_GET_MAX_DIVISOR = 13, }; +enum rpu_oper_mode { + PM_RPU_MODE_LOCKSTEP = 0, + PM_RPU_MODE_SPLIT = 1, +}; + +enum rpu_boot_mem { + PM_RPU_BOOTMEM_LOVEC = 0, + PM_RPU_BOOTMEM_HIVEC = 1, +}; + +enum rpu_tcm_comb { + PM_RPU_TCM_SPLIT = 0, + PM_RPU_TCM_COMB = 1, +}; + enum zynqmp_pm_reset_action { PM_RESET_ACTION_RELEASE = 0, PM_RESET_ACTION_ASSERT = 1, -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Tanmay Shah <tanmay.shah@amd.com> To: <bjorn.andersson@linaro.org>, <mathieu.poirier@linaro.org>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <michal.simek@xilinx.com>, <ben.levinsky@xilinx.com>, <tanmay.shah@xilinx.com>, <michal.simek@amd.com> Cc: <linux-remoteproc@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, Tanmay Shah <tanmay.shah@amd.com> Subject: [PATCH v9 3/6] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration. Date: Thu, 7 Jul 2022 18:39:52 -0700 [thread overview] Message-ID: <20220708013955.2340449-4-tanmay.shah@amd.com> (raw) In-Reply-To: <20220708013955.2340449-1-tanmay.shah@amd.com> From: Ben Levinsky <ben.levinsky@xilinx.com> Add ZynqMP firmware ioctl enums for RPU configuration and TCM Nodes for later use via request_node and release_node Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com> Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com> Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> --- Changes in v9: - None Changes in v8: - None Changes in v7: - None Changes in v6: - None Changes in v5: - None Changes in v4: - None Changes in v3: - None include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 1ec73d5352c3..31386c82411a 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -134,6 +134,10 @@ enum pm_ret_status { }; enum pm_ioctl_id { + IOCTL_GET_RPU_OPER_MODE = 0, + IOCTL_SET_RPU_OPER_MODE = 1, + IOCTL_RPU_BOOT_ADDR_CONFIG = 2, + IOCTL_TCM_COMB_CONFIG = 3, IOCTL_SD_DLL_RESET = 6, IOCTL_SET_SD_TAPDELAY = 7, IOCTL_SET_PLL_FRAC_MODE = 8, @@ -171,6 +175,21 @@ enum pm_query_id { PM_QID_CLOCK_GET_MAX_DIVISOR = 13, }; +enum rpu_oper_mode { + PM_RPU_MODE_LOCKSTEP = 0, + PM_RPU_MODE_SPLIT = 1, +}; + +enum rpu_boot_mem { + PM_RPU_BOOTMEM_LOVEC = 0, + PM_RPU_BOOTMEM_HIVEC = 1, +}; + +enum rpu_tcm_comb { + PM_RPU_TCM_SPLIT = 0, + PM_RPU_TCM_COMB = 1, +}; + enum zynqmp_pm_reset_action { PM_RESET_ACTION_RELEASE = 0, PM_RESET_ACTION_ASSERT = 1, -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-07-08 1:40 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-07-08 1:39 [PATCH v9 0/6] Add Xilinx RPU subsystem support Tanmay Shah 2022-07-08 1:39 ` Tanmay Shah 2022-07-08 1:39 ` [PATCH v9 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings Tanmay Shah 2022-07-08 1:39 ` Tanmay Shah 2022-09-01 17:38 ` Mathieu Poirier 2022-09-01 17:38 ` Mathieu Poirier 2022-09-01 19:29 ` Tanmay Shah 2022-09-01 19:29 ` Tanmay Shah 2022-09-06 23:02 ` Tanmay Shah 2022-09-06 23:02 ` Tanmay Shah 2022-07-08 1:39 ` [PATCH v9 2/6] arm64: dts: xilinx: zynqmp: Add RPU subsystem device node Tanmay Shah 2022-07-08 1:39 ` Tanmay Shah 2022-07-08 1:39 ` Tanmay Shah [this message] 2022-07-08 1:39 ` [PATCH v9 3/6] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Tanmay Shah 2022-07-08 1:39 ` [PATCH v9 4/6] firmware: xilinx: Add shutdown/wakeup APIs Tanmay Shah 2022-07-08 1:39 ` Tanmay Shah 2022-07-08 1:39 ` [PATCH v9 5/6] firmware: xilinx: Add RPU configuration APIs Tanmay Shah 2022-07-08 1:39 ` Tanmay Shah 2022-07-08 1:39 ` [PATCH v9 6/6] drivers: remoteproc: Add Xilinx r5 remoteproc driver Tanmay Shah 2022-07-08 1:39 ` Tanmay Shah 2022-07-08 19:38 ` kernel test robot 2022-07-08 19:38 ` kernel test robot 2022-09-01 20:25 ` Mathieu Poirier 2022-09-01 20:25 ` Mathieu Poirier 2022-09-02 0:04 ` Tanmay Shah 2022-09-02 0:04 ` Tanmay Shah 2022-09-02 19:59 ` Mathieu Poirier 2022-09-02 19:59 ` Mathieu Poirier 2022-09-08 19:42 ` Tanmay Shah 2022-09-08 19:42 ` Tanmay Shah 2022-09-02 0:06 ` Tanmay Shah 2022-09-02 0:06 ` Tanmay Shah 2022-09-26 22:02 ` Tanmay Shah 2022-09-26 22:02 ` Tanmay Shah 2022-09-29 17:22 ` Mathieu Poirier 2022-09-29 17:22 ` Mathieu Poirier 2022-09-29 19:28 ` Tanmay Shah 2022-09-29 19:28 ` Tanmay Shah 2022-09-29 23:20 ` Mathieu Poirier 2022-09-29 23:20 ` Mathieu Poirier 2022-09-06 21:07 ` Mathieu Poirier 2022-09-06 21:07 ` Mathieu Poirier
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220708013955.2340449-4-tanmay.shah@amd.com \ --to=tanmay.shah@amd.com \ --cc=ben.levinsky@xilinx.com \ --cc=bjorn.andersson@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-remoteproc@vger.kernel.org \ --cc=mathieu.poirier@linaro.org \ --cc=michal.simek@amd.com \ --cc=michal.simek@xilinx.com \ --cc=robh+dt@kernel.org \ --cc=tanmay.shah@xilinx.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.