* [PATCH 2/6] arm: Remove strongarm support
2022-06-27 17:35 [PATCH 1/6] Convert CONFIG_SYS_CACHE_STASHING to Kconfig Tom Rini
@ 2022-06-27 17:35 ` Tom Rini
2022-06-27 17:35 ` [PATCH 3/6] omap3: emif4: More clearly hard-code cs0 size Tom Rini
` (4 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Tom Rini @ 2022-06-27 17:35 UTC (permalink / raw)
To: u-boot
There are no platforms using this architecture anymore, remove it.
Signed-off-by: Tom Rini <trini@konsulko.com>
---
arch/arm/Kconfig | 7 -
arch/arm/Makefile | 2 -
arch/arm/cpu/sa1100/Makefile | 9 -
arch/arm/cpu/sa1100/cpu.c | 65 -
arch/arm/cpu/sa1100/start.S | 126 -
arch/arm/cpu/sa1100/timer.c | 66 -
arch/arm/include/asm/arch-sa1100/bitfield.h | 112 -
arch/arm/include/asm/proc-armv/system.h | 3 +-
drivers/usb/gadget/ether.c | 15 -
drivers/usb/gadget/gadget_chips.h | 9 -
include/SA-1100.h | 2833 -------------------
11 files changed, 1 insertion(+), 3246 deletions(-)
delete mode 100644 arch/arm/cpu/sa1100/Makefile
delete mode 100644 arch/arm/cpu/sa1100/cpu.c
delete mode 100644 arch/arm/cpu/sa1100/start.S
delete mode 100644 arch/arm/cpu/sa1100/timer.c
delete mode 100644 arch/arm/include/asm/arch-sa1100/bitfield.h
delete mode 100644 include/SA-1100.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 434c5e98fa36..163e94fec0c1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -330,11 +330,6 @@ config CPU_V7R
select SYS_ARM_MPU
select SYS_CACHE_SHIFT_6
-config CPU_SA1100
- bool
- select SYS_CACHE_SHIFT_5
- imply SYS_ARM_MMU
-
config SYS_CPU
default "arm720t" if CPU_ARM720T
default "arm920t" if CPU_ARM920T
@@ -345,7 +340,6 @@ config SYS_CPU
default "armv7" if CPU_V7A
default "armv7" if CPU_V7R
default "armv7m" if CPU_V7M
- default "sa1100" if CPU_SA1100
default "armv8" if ARM64
config SYS_ARM_ARCH
@@ -359,7 +353,6 @@ config SYS_ARM_ARCH
default 7 if CPU_V7A
default 7 if CPU_V7M
default 7 if CPU_V7R
- default 4 if CPU_SA1100
default 8 if ARM64
choice
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 09fc31887880..a37603035d8a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -10,7 +10,6 @@ arch-$(CONFIG_CPU_ARM720T) =-march=armv4
arch-$(CONFIG_CPU_ARM920T) =-march=armv4t
arch-$(CONFIG_CPU_ARM926EJS) =-march=armv5te
arch-$(CONFIG_CPU_ARM946ES) =-march=armv5te
-arch-$(CONFIG_CPU_SA1100) =-march=armv4
arch-$(CONFIG_CPU_ARM1136) =-march=armv5t
arch-$(CONFIG_CPU_ARM1176) =-march=armv5t
arch-$(CONFIG_CPU_V7A) =$(call cc-option, -march=armv7-a, \
@@ -39,7 +38,6 @@ tune-$(CONFIG_CPU_ARM720T) =-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM920T) =
tune-$(CONFIG_CPU_ARM926EJS) =
tune-$(CONFIG_CPU_ARM946ES) =
-tune-$(CONFIG_CPU_SA1100) =-mtune=strongarm1100
tune-$(CONFIG_CPU_ARM1136) =
tune-$(CONFIG_CPU_ARM1176) =
tune-$(CONFIG_CPU_V7A) =-mtune=generic-armv7-a
diff --git a/arch/arm/cpu/sa1100/Makefile b/arch/arm/cpu/sa1100/Makefile
deleted file mode 100644
index 38193092cdb0..000000000000
--- a/arch/arm/cpu/sa1100/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-extra-y = start.o
-
-obj-y += cpu.o
-obj-y += timer.o
diff --git a/arch/arm/cpu/sa1100/cpu.c b/arch/arm/cpu/sa1100/cpu.c
deleted file mode 100644
index 6f67f7fc2284..000000000000
--- a/arch/arm/cpu/sa1100/cpu.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- */
-
-/*
- * CPU specific code
- */
-
-#include <common.h>
-#include <command.h>
-#include <cpu_func.h>
-#include <irq_func.h>
-#include <asm/system.h>
-#include <asm/io.h>
-
-static void cache_flush(void);
-
-int cleanup_before_linux (void)
-{
- /*
- * this function is called just before we call linux
- * it prepares the processor for linux
- *
- * just disable everything that can disturb booting linux
- */
-
- disable_interrupts();
-
- /* turn off I-cache */
- icache_disable();
- dcache_disable();
-
- /* flush I-cache */
- cache_flush();
-
- return (0);
-}
-
-/* flush I/D-cache */
-static void cache_flush (void)
-{
- unsigned long i = 0;
-
- asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
-}
-
-#define RST_BASE 0x90030000
-#define RSRR 0x00
-#define RCSR 0x04
-
-__attribute__((noreturn)) void reset_cpu(void)
-{
- /* repeat endlessly */
- while (1) {
- writel(0, RST_BASE + RCSR);
- writel(1, RST_BASE + RSRR);
- }
-}
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
deleted file mode 100644
index 2f84f20575c9..000000000000
--- a/arch/arm/cpu/sa1100/start.S
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * armboot - Startup Code for SA1100 CPU
- *
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000 Wolfgang Denk <wd@denx.de>
- * Copyright (c) 2001 Alex Züpke <azu@sysgo.de>
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * relocate armboot to ram
- * setup stack
- * jump to second stage
- *
- *************************************************************************
- */
-
- .globl reset
-
-reset:
- /*
- * set the cpu to SVC32 mode
- */
- mrs r0,cpsr
- bic r0,r0,#0x1f
- orr r0,r0,#0xd3
- msr cpsr,r0
-
- /*
- * we do sys-critical inits only at reboot,
- * not when booting from ram!
- */
-#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
- bl cpu_init_crit
-#endif
-
- bl _main
-
-/*------------------------------------------------------------------------------*/
-
- .globl c_runtime_cpu_setup
-c_runtime_cpu_setup:
-
- mov pc, lr
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-
-/* Interrupt-Controller base address */
-IC_BASE: .word 0x90050000
-#define ICMR 0x04
-
-
-/* Reset-Controller */
-RST_BASE: .word 0x90030000
-#define RSRR 0x00
-#define RCSR 0x04
-
-
-/* PWR */
-PWR_BASE: .word 0x90020000
-#define PSPR 0x08
-#define PPCR 0x14
-cpuspeed: .word CONFIG_SYS_CPUSPEED
-
-
-cpu_init_crit:
- /*
- * mask all IRQs
- */
- ldr r0, IC_BASE
- mov r1, #0x00
- str r1, [r0, #ICMR]
-
- /* set clock speed */
- ldr r0, PWR_BASE
- ldr r1, cpuspeed
- str r1, [r0, #PPCR]
-
-#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT_ONLY)
- /*
- * before relocating, we have to setup RAM timing
- * because memory timing is board-dependend, you will
- * find a lowlevel_init.S in your board directory.
- */
- mov ip, lr
- bl lowlevel_init
- mov lr, ip
-#endif
-
- /*
- * disable MMU stuff and enable I-cache
- */
- mrc p15,0,r0,c1,c0
- bic r0, r0, #0x00002000 @ clear bit 13 (X)
- bic r0, r0, #0x0000000f @ clear bits 3-0 (WCAM)
- orr r0, r0, #0x00001000 @ set bit 12 (I) Icache
- orr r0, r0, #0x00000002 @ set bit 1 (A) Align
- mcr p15,0,r0,c1,c0
-
- /*
- * flush v4 I/D caches
- */
- mov r0, #0
- mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
- mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
-
- mov pc, lr
diff --git a/arch/arm/cpu/sa1100/timer.c b/arch/arm/cpu/sa1100/timer.c
deleted file mode 100644
index a5cdaf5a66c4..000000000000
--- a/arch/arm/cpu/sa1100/timer.c
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- */
-
-#include <common.h>
-#include <SA-1100.h>
-#include <time.h>
-#include <linux/delay.h>
-
-static ulong get_timer_masked (void)
-{
- return OSCR;
-}
-
-ulong get_timer (ulong base)
-{
- return get_timer_masked ();
-}
-
-void __udelay(unsigned long usec)
-{
- ulong tmo;
- ulong endtime;
- signed long diff;
-
- if (usec >= 1000) {
- tmo = usec / 1000;
- tmo *= CONFIG_SYS_HZ;
- tmo /= 1000;
- } else {
- tmo = usec * CONFIG_SYS_HZ;
- tmo /= (1000*1000);
- }
-
- endtime = get_timer_masked () + tmo;
-
- do {
- ulong now = get_timer_masked ();
- diff = endtime - now;
- } while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
- return CONFIG_SYS_HZ;
-}
diff --git a/arch/arm/include/asm/arch-sa1100/bitfield.h b/arch/arm/include/asm/arch-sa1100/bitfield.h
deleted file mode 100644
index 104a21c2e47d..000000000000
--- a/arch/arm/include/asm/arch-sa1100/bitfield.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * FILE bitfield.h
- *
- * Version 1.1
- * Author Copyright (c) Marc A. Viredaz, 1998
- * DEC Western Research Laboratory, Palo Alto, CA
- * Date April 1998 (April 1997)
- * System Advanced RISC Machine (ARM)
- * Language C or ARM Assembly
- * Purpose Definition of macros to operate on bit fields.
- */
-
-
-#ifndef __BITFIELD_H
-#define __BITFIELD_H
-
-#ifndef __ASSEMBLY__
-#define UData(Data) ((unsigned long) (Data))
-#else
-#define UData(Data) (Data)
-#endif
-
-
-/*
- * MACRO: Fld
- *
- * Purpose
- * The macro "Fld" encodes a bit field, given its size and its shift value
- * with respect to bit 0.
- *
- * Note
- * A more intuitive way to encode bit fields would have been to use their
- * mask. However, extracting size and shift value information from a bit
- * field's mask is cumbersome and might break the assembler (255-character
- * line-size limit).
- *
- * Input
- * Size Size of the bit field, in number of bits.
- * Shft Shift value of the bit field with respect to bit 0.
- *
- * Output
- * Fld Encoded bit field.
- */
-
-#define Fld(Size, Shft) (((Size) << 16) + (Shft))
-
-
-/*
- * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
- *
- * Purpose
- * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
- * the size, shift value, mask, aligned mask, and first bit of a
- * bit field.
- *
- * Input
- * Field Encoded bit field (using the macro "Fld").
- *
- * Output
- * FSize Size of the bit field, in number of bits.
- * FShft Shift value of the bit field with respect to bit 0.
- * FMsk Mask for the bit field.
- * FAlnMsk Mask for the bit field, aligned on bit 0.
- * F1stBit First bit of the bit field.
- */
-
-#define FSize(Field) ((Field) >> 16)
-#define FShft(Field) ((Field) & 0x0000FFFF)
-#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field))
-#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1)
-#define F1stBit(Field) (UData (1) << FShft (Field))
-
-
-/*
- * MACRO: FInsrt
- *
- * Purpose
- * The macro "FInsrt" inserts a value into a bit field by shifting the
- * former appropriately.
- *
- * Input
- * Value Bit-field value.
- * Field Encoded bit field (using the macro "Fld").
- *
- * Output
- * FInsrt Bit-field value positioned appropriately.
- */
-
-#define FInsrt(Value, Field) \
- (UData (Value) << FShft (Field))
-
-
-/*
- * MACRO: FExtr
- *
- * Purpose
- * The macro "FExtr" extracts the value of a bit field by masking and
- * shifting it appropriately.
- *
- * Input
- * Data Data containing the bit-field to be extracted.
- * Field Encoded bit field (using the macro "Fld").
- *
- * Output
- * FExtr Bit-field value.
- */
-
-#define FExtr(Data, Field) \
- ((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
-
-
-#endif /* __BITFIELD_H */
diff --git a/arch/arm/include/asm/proc-armv/system.h b/arch/arm/include/asm/proc-armv/system.h
index c61374e9f2e4..a1f59d9cbae0 100644
--- a/arch/arm/include/asm/proc-armv/system.h
+++ b/arch/arm/include/asm/proc-armv/system.h
@@ -163,8 +163,7 @@
#endif /* CONFIG_ARM64 */
-#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) || \
- defined(CONFIG_ARM64)
+#if defined(CONFIG_ARM64)
/*
* On the StrongARM, "swp" is terminally broken since it bypasses the
* cache totally. This means that the cache becomes inconsistent, and,
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 72b4f7f306ab..abb5332f1394 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -1048,13 +1048,6 @@ static int eth_set_config(struct eth_dev *dev, unsigned number,
int result = 0;
struct usb_gadget *gadget = dev->gadget;
- if (gadget_is_sa1100(gadget)
- && dev->config
- && dev->tx_qlen != 0) {
- /* tx fifo is full, but we can't clear it...*/
- pr_err("can't change configurations");
- return -ESPIPE;
- }
eth_reset_config(dev);
switch (number) {
@@ -2019,14 +2012,6 @@ static int eth_bind(struct usb_gadget *gadget)
/* sh doesn't support multiple interfaces or configs */
cdc = 0;
rndis = 0;
- } else if (gadget_is_sa1100(gadget)) {
- /* hardware can't write zlps */
- zlp = 0;
- /*
- * sa1100 CAN do CDC, without status endpoint ... we use
- * non-CDC to be compatible with ARM Linux-2.4 "usb-eth".
- */
- cdc = 0;
}
gcnum = usb_gadget_controller_number(gadget);
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 66ccd0541726..abc6dc7f89fc 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -45,13 +45,6 @@
#define gadget_is_sh(g) 0
#endif
-/* not yet stable on 2.6 (would help "original Zaurus") */
-#ifdef CONFIG_USB_GADGET_SA1100
-#define gadget_is_sa1100(g) (!strcmp("sa1100_udc", (g)->name))
-#else
-#define gadget_is_sa1100(g) 0
-#endif
-
/* handhelds.org tree (?) */
#ifdef CONFIG_USB_GADGET_MQ11XX
#define gadget_is_mq11xx(g) (!strcmp("mq11xx_udc", (g)->name))
@@ -183,8 +176,6 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
return 0x02;
else if (gadget_is_sh(gadget))
return 0x04;
- else if (gadget_is_sa1100(gadget))
- return 0x05;
else if (gadget_is_goku(gadget))
return 0x06;
else if (gadget_is_mq11xx(gadget))
diff --git a/include/SA-1100.h b/include/SA-1100.h
deleted file mode 100644
index 7589df238a6f..000000000000
--- a/include/SA-1100.h
+++ /dev/null
@@ -1,2833 +0,0 @@
-/*
- * FILE SA-1100.h
- *
- * Version 1.2
- * Author Copyright (c) Marc A. Viredaz, 1998
- * DEC Western Research Laboratory, Palo Alto, CA
- * Date January 1998 (April 1997)
- * System StrongARM SA-1100
- * Language C or ARM Assembly
- * Purpose Definition of constants related to the StrongARM
- * SA-1100 microprocessor (Advanced RISC Machine (ARM)
- * architecture version 4). This file is based on the
- * StrongARM SA-1100 data sheet version 2.2.
- *
- * Language-specific definitions are selected by the
- * macro "LANGUAGE", which should be defined as either
- * "C" (default) or "Assembly".
- */
-
-
-#ifndef LANGUAGE
-# ifdef __ASSEMBLY__
-# define LANGUAGE Assembly
-# else
-# define LANGUAGE C
-# endif
-#endif
-
-#ifndef io_p2v
-#define io_p2v(PhAdd) (PhAdd)
-#endif
-
-#include <asm/arch-sa1100/bitfield.h>
-
-#define C 0
-#define Assembly 1
-
-
-#if LANGUAGE == C
-typedef unsigned short Word16 ;
-typedef unsigned int Word32 ;
-typedef Word32 Word ;
-typedef Word Quad [4] ;
-typedef void *Address ;
-typedef void (*ExcpHndlr) (void) ;
-#endif /* LANGUAGE == C */
-
-
-/*
- * Memory
- */
-
-#define MemBnkSp 0x08000000 /* Memory Bank Space [byte] */
-
-#define StMemBnkSp MemBnkSp /* Static Memory Bank Space [byte] */
-#define StMemBnk0Sp StMemBnkSp /* Static Memory Bank 0 Space */
- /* [byte] */
-#define StMemBnk1Sp StMemBnkSp /* Static Memory Bank 1 Space */
- /* [byte] */
-#define StMemBnk2Sp StMemBnkSp /* Static Memory Bank 2 Space */
- /* [byte] */
-#define StMemBnk3Sp StMemBnkSp /* Static Memory Bank 3 Space */
- /* [byte] */
-
-#define DRAMBnkSp MemBnkSp /* DRAM Bank Space [byte] */
-#define DRAMBnk0Sp DRAMBnkSp /* DRAM Bank 0 Space [byte] */
-#define DRAMBnk1Sp DRAMBnkSp /* DRAM Bank 1 Space [byte] */
-#define DRAMBnk2Sp DRAMBnkSp /* DRAM Bank 2 Space [byte] */
-#define DRAMBnk3Sp DRAMBnkSp /* DRAM Bank 3 Space [byte] */
-
-#define ZeroMemSp MemBnkSp /* Zero Memory bank Space [byte] */
-
-#define _StMemBnk(Nb) /* Static Memory Bank [0..3] */ \
- (0x00000000 + (Nb)*StMemBnkSp)
-#define _StMemBnk0 _StMemBnk (0) /* Static Memory Bank 0 */
-#define _StMemBnk1 _StMemBnk (1) /* Static Memory Bank 1 */
-#define _StMemBnk2 _StMemBnk (2) /* Static Memory Bank 2 */
-#define _StMemBnk3 _StMemBnk (3) /* Static Memory Bank 3 */
-
-#if LANGUAGE == C
-typedef Quad StMemBnkType [StMemBnkSp/sizeof (Quad)] ;
-#define StMemBnk /* Static Memory Bank [0..3] */ \
- ((StMemBnkType *) io_p2v (_StMemBnk (0)))
-#define StMemBnk0 (StMemBnk [0]) /* Static Memory Bank 0 */
-#define StMemBnk1 (StMemBnk [1]) /* Static Memory Bank 1 */
-#define StMemBnk2 (StMemBnk [2]) /* Static Memory Bank 2 */
-#define StMemBnk3 (StMemBnk [3]) /* Static Memory Bank 3 */
-#endif /* LANGUAGE == C */
-
-#define _DRAMBnk(Nb) /* DRAM Bank [0..3] */ \
- (0xC0000000 + (Nb)*DRAMBnkSp)
-#define _DRAMBnk0 _DRAMBnk (0) /* DRAM Bank 0 */
-#define _DRAMBnk1 _DRAMBnk (1) /* DRAM Bank 1 */
-#define _DRAMBnk2 _DRAMBnk (2) /* DRAM Bank 2 */
-#define _DRAMBnk3 _DRAMBnk (3) /* DRAM Bank 3 */
-
-#if LANGUAGE == C
-typedef Quad DRAMBnkType [DRAMBnkSp/sizeof (Quad)] ;
-#define DRAMBnk /* DRAM Bank [0..3] */ \
- ((DRAMBnkType *) io_p2v (_DRAMBnk (0)))
-#define DRAMBnk0 (DRAMBnk [0]) /* DRAM Bank 0 */
-#define DRAMBnk1 (DRAMBnk [1]) /* DRAM Bank 1 */
-#define DRAMBnk2 (DRAMBnk [2]) /* DRAM Bank 2 */
-#define DRAMBnk3 (DRAMBnk [3]) /* DRAM Bank 3 */
-#endif /* LANGUAGE == C */
-
-#define _ZeroMem 0xE0000000 /* Zero Memory bank */
-
-#if LANGUAGE == C
-typedef Quad ZeroMemType [ZeroMemSp/sizeof (Quad)] ;
-#define ZeroMem /* Zero Memory bank */ \
- (*((ZeroMemType *) io_p2v (_ZeroMem)))
-#endif /* LANGUAGE == C */
-
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) sockets
- */
-
-#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
-#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
-#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
-#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
-#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
-
-#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
-#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
-#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
-#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
-
-#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
-#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
-#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
-#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
-
-#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
- (0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
-#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
- (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
- (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-
-#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
-#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
-#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
-#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
-
-#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
-#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
-#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
-#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
-
-#if LANGUAGE == C
-
-typedef Quad PCMCIAPrtType [PCMCIAPrtSp/sizeof (Quad)] ;
-typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ;
-
-#define PCMCIA0 /* PCMCIA 0 */ \
- (*((PCMCIAType *) io_p2v (_PCMCIA0)))
-#define PCMCIA0IO /* PCMCIA 0 I/O */ \
- (*((PCMCIAPrtType *) io_p2v (_PCMCIA0IO)))
-#define PCMCIA0Attr /* PCMCIA 0 Attribute */ \
- (*((PCMCIAPrtType *) io_p2v (_PCMCIA0Attr)))
-#define PCMCIA0Mem /* PCMCIA 0 Memory */ \
- (*((PCMCIAPrtType *) io_p2v (_PCMCIA0Mem)))
-
-#define PCMCIA1 /* PCMCIA 1 */ \
- (*((PCMCIAType *) io_p2v (_PCMCIA1)))
-#define PCMCIA1IO /* PCMCIA 1 I/O */ \
- (*((PCMCIAPrtType *) io_p2v (_PCMCIA1IO)))
-#define PCMCIA1Attr /* PCMCIA 1 Attribute */ \
- (*((PCMCIAPrtType *) io_p2v (_PCMCIA1Attr)))
-#define PCMCIA1Mem /* PCMCIA 1 Memory */ \
- (*((PCMCIAPrtType *) io_p2v (_PCMCIA1Mem)))
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * Universal Serial Bus (USB) Device Controller (UDC) control registers
- *
- * Registers
- * Ser0UDCCR Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Control Register (read/write).
- * Ser0UDCAR Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Address Register (read/write).
- * Ser0UDCOMP Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Output Maximum Packet size register
- * (read/write).
- * Ser0UDCIMP Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Input Maximum Packet size register
- * (read/write).
- * Ser0UDCCS0 Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Control/Status register end-point 0
- * (read/write).
- * Ser0UDCCS1 Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Control/Status register end-point 1
- * (output, read/write).
- * Ser0UDCCS2 Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Control/Status register end-point 2
- * (input, read/write).
- * Ser0UDCD0 Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Data register end-point 0
- * (read/write).
- * Ser0UDCWC Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Write Count register end-point 0
- * (read).
- * Ser0UDCDR Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Data Register (read/write).
- * Ser0UDCSR Serial port 0 Universal Serial Bus (USB) Device
- * Controller (UDC) Status Register (read/write).
- */
-
-#define _Ser0UDCCR 0x80000000 /* Ser. port 0 UDC Control Reg. */
-#define _Ser0UDCAR 0x80000004 /* Ser. port 0 UDC Address Reg. */
-#define _Ser0UDCOMP 0x80000008 /* Ser. port 0 UDC Output Maximum */
- /* Packet size reg. */
-#define _Ser0UDCIMP 0x8000000C /* Ser. port 0 UDC Input Maximum */
- /* Packet size reg. */
-#define _Ser0UDCCS0 0x80000010 /* Ser. port 0 UDC Control/Status */
- /* reg. end-point 0 */
-#define _Ser0UDCCS1 0x80000014 /* Ser. port 0 UDC Control/Status */
- /* reg. end-point 1 (output) */
-#define _Ser0UDCCS2 0x80000018 /* Ser. port 0 UDC Control/Status */
- /* reg. end-point 2 (input) */
-#define _Ser0UDCD0 0x8000001C /* Ser. port 0 UDC Data reg. */
- /* end-point 0 */
-#define _Ser0UDCWC 0x80000020 /* Ser. port 0 UDC Write Count */
- /* reg. end-point 0 */
-#define _Ser0UDCDR 0x80000028 /* Ser. port 0 UDC Data Reg. */
-#define _Ser0UDCSR 0x80000030 /* Ser. port 0 UDC Status Reg. */
-
-#if LANGUAGE == C
-#define Ser0UDCCR /* Ser. port 0 UDC Control Reg. */ \
- (*((volatile Word *) io_p2v (_Ser0UDCCR)))
-#define Ser0UDCAR /* Ser. port 0 UDC Address Reg. */ \
- (*((volatile Word *) io_p2v (_Ser0UDCAR)))
-#define Ser0UDCOMP /* Ser. port 0 UDC Output Maximum */ \
- /* Packet size reg. */ \
- (*((volatile Word *) io_p2v (_Ser0UDCOMP)))
-#define Ser0UDCIMP /* Ser. port 0 UDC Input Maximum */ \
- /* Packet size reg. */ \
- (*((volatile Word *) io_p2v (_Ser0UDCIMP)))
-#define Ser0UDCCS0 /* Ser. port 0 UDC Control/Status */ \
- /* reg. end-point 0 */ \
- (*((volatile Word *) io_p2v (_Ser0UDCCS0)))
-#define Ser0UDCCS1 /* Ser. port 0 UDC Control/Status */ \
- /* reg. end-point 1 (output) */ \
- (*((volatile Word *) io_p2v (_Ser0UDCCS1)))
-#define Ser0UDCCS2 /* Ser. port 0 UDC Control/Status */ \
- /* reg. end-point 2 (input) */ \
- (*((volatile Word *) io_p2v (_Ser0UDCCS2)))
-#define Ser0UDCD0 /* Ser. port 0 UDC Data reg. */ \
- /* end-point 0 */ \
- (*((volatile Word *) io_p2v (_Ser0UDCD0)))
-#define Ser0UDCWC /* Ser. port 0 UDC Write Count */ \
- /* reg. end-point 0 */ \
- (*((volatile Word *) io_p2v (_Ser0UDCWC)))
-#define Ser0UDCDR /* Ser. port 0 UDC Data Reg. */ \
- (*((volatile Word *) io_p2v (_Ser0UDCDR)))
-#define Ser0UDCSR /* Ser. port 0 UDC Status Reg. */ \
- (*((volatile Word *) io_p2v (_Ser0UDCSR)))
-#endif /* LANGUAGE == C */
-
-#define UDCCR_UDD 0x00000001 /* UDC Disable */
-#define UDCCR_UDA 0x00000002 /* UDC Active (read) */
-#define UDCCR_RESIM 0x00000004 /* Resume Interrupt Mask, per errata */
-#define UDCCR_EIM 0x00000008 /* End-point 0 Interrupt Mask */
- /* (disable) */
-#define UDCCR_RIM 0x00000010 /* Receive Interrupt Mask */
- /* (disable) */
-#define UDCCR_TIM 0x00000020 /* Transmit Interrupt Mask */
- /* (disable) */
-#define UDCCR_SRM 0x00000040 /* Suspend/Resume interrupt Mask */
- /* (disable) */
-#define UDCCR_SUSIM UDCCR_SRM /* Per errata, SRM just masks suspend */
-#define UDCCR_REM 0x00000080 /* REset interrupt Mask (disable) */
-
-#define UDCAR_ADD Fld (7, 0) /* function ADDress */
-
-#define UDCOMP_OUTMAXP Fld (8, 0) /* OUTput MAXimum Packet size - 1 */
- /* [byte] */
-#define UDCOMP_OutMaxPkt(Size) /* Output Maximum Packet size */ \
- /* [1..256 byte] */ \
- (((Size) - 1) << FShft (UDCOMP_OUTMAXP))
-
-#define UDCIMP_INMAXP Fld (8, 0) /* INput MAXimum Packet size - 1 */
- /* [byte] */
-#define UDCIMP_InMaxPkt(Size) /* Input Maximum Packet size */ \
- /* [1..256 byte] */ \
- (((Size) - 1) << FShft (UDCIMP_INMAXP))
-
-#define UDCCS0_OPR 0x00000001 /* Output Packet Ready (read) */
-#define UDCCS0_IPR 0x00000002 /* Input Packet Ready */
-#define UDCCS0_SST 0x00000004 /* Sent STall */
-#define UDCCS0_FST 0x00000008 /* Force STall */
-#define UDCCS0_DE 0x00000010 /* Data End */
-#define UDCCS0_SE 0x00000020 /* Setup End (read) */
-#define UDCCS0_SO 0x00000040 /* Serviced Output packet ready */
- /* (write) */
-#define UDCCS0_SSE 0x00000080 /* Serviced Setup End (write) */
-
-#define UDCCS1_RFS 0x00000001 /* Receive FIFO 12-bytes or more */
- /* Service request (read) */
-#define UDCCS1_RPC 0x00000002 /* Receive Packet Complete */
-#define UDCCS1_RPE 0x00000004 /* Receive Packet Error (read) */
-#define UDCCS1_SST 0x00000008 /* Sent STall */
-#define UDCCS1_FST 0x00000010 /* Force STall */
-#define UDCCS1_RNE 0x00000020 /* Receive FIFO Not Empty (read) */
-
-#define UDCCS2_TFS 0x00000001 /* Transmit FIFO 8-bytes or less */
- /* Service request (read) */
-#define UDCCS2_TPC 0x00000002 /* Transmit Packet Complete */
-#define UDCCS2_TPE 0x00000004 /* Transmit Packet Error (read) */
-#define UDCCS2_TUR 0x00000008 /* Transmit FIFO Under-Run */
-#define UDCCS2_SST 0x00000010 /* Sent STall */
-#define UDCCS2_FST 0x00000020 /* Force STall */
-
-#define UDCD0_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
-
-#define UDCWC_WC Fld (4, 0) /* Write Count */
-
-#define UDCDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
-
-#define UDCSR_EIR 0x00000001 /* End-point 0 Interrupt Request */
-#define UDCSR_RIR 0x00000002 /* Receive Interrupt Request */
-#define UDCSR_TIR 0x00000004 /* Transmit Interrupt Request */
-#define UDCSR_SUSIR 0x00000008 /* SUSpend Interrupt Request */
-#define UDCSR_RESIR 0x00000010 /* RESume Interrupt Request */
-#define UDCSR_RSTIR 0x00000020 /* ReSeT Interrupt Request */
-
-
-/*
- * Universal Asynchronous Receiver/Transmitter (UART) control registers
- *
- * Registers
- * Ser1UTCR0 Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 0
- * (read/write).
- * Ser1UTCR1 Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 1
- * (read/write).
- * Ser1UTCR2 Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 2
- * (read/write).
- * Ser1UTCR3 Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 3
- * (read/write).
- * Ser1UTDR Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Data Register
- * (read/write).
- * Ser1UTSR0 Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Status Register 0
- * (read/write).
- * Ser1UTSR1 Serial port 1 Universal Asynchronous
- * Receiver/Transmitter (UART) Status Register 1 (read).
- *
- * Ser2UTCR0 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 0
- * (read/write).
- * Ser2UTCR1 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 1
- * (read/write).
- * Ser2UTCR2 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 2
- * (read/write).
- * Ser2UTCR3 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 3
- * (read/write).
- * Ser2UTCR4 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 4
- * (read/write).
- * Ser2UTDR Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Data Register
- * (read/write).
- * Ser2UTSR0 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Status Register 0
- * (read/write).
- * Ser2UTSR1 Serial port 2 Universal Asynchronous
- * Receiver/Transmitter (UART) Status Register 1 (read).
- *
- * Ser3UTCR0 Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 0
- * (read/write).
- * Ser3UTCR1 Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 1
- * (read/write).
- * Ser3UTCR2 Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 2
- * (read/write).
- * Ser3UTCR3 Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Control Register 3
- * (read/write).
- * Ser3UTDR Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Data Register
- * (read/write).
- * Ser3UTSR0 Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Status Register 0
- * (read/write).
- * Ser3UTSR1 Serial port 3 Universal Asynchronous
- * Receiver/Transmitter (UART) Status Register 1 (read).
- *
- * Clocks
- * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
- * or 3.5795 MHz).
- * fua, Tua Frequency, period of the UART communication.
- */
-
-#define _UTCR0(Nb) /* UART Control Reg. 0 [1..3] */ \
- (0x80010000 + ((Nb) - 1)*0x00020000)
-#define _UTCR1(Nb) /* UART Control Reg. 1 [1..3] */ \
- (0x80010004 + ((Nb) - 1)*0x00020000)
-#define _UTCR2(Nb) /* UART Control Reg. 2 [1..3] */ \
- (0x80010008 + ((Nb) - 1)*0x00020000)
-#define _UTCR3(Nb) /* UART Control Reg. 3 [1..3] */ \
- (0x8001000C + ((Nb) - 1)*0x00020000)
-#define _UTCR4(Nb) /* UART Control Reg. 4 [2] */ \
- (0x80010010 + ((Nb) - 1)*0x00020000)
-#define _UTDR(Nb) /* UART Data Reg. [1..3] */ \
- (0x80010014 + ((Nb) - 1)*0x00020000)
-#define _UTSR0(Nb) /* UART Status Reg. 0 [1..3] */ \
- (0x8001001C + ((Nb) - 1)*0x00020000)
-#define _UTSR1(Nb) /* UART Status Reg. 1 [1..3] */ \
- (0x80010020 + ((Nb) - 1)*0x00020000)
-
-#define _Ser1UTCR0 _UTCR0 (1) /* Ser. port 1 UART Control Reg. 0 */
-#define _Ser1UTCR1 _UTCR1 (1) /* Ser. port 1 UART Control Reg. 1 */
-#define _Ser1UTCR2 _UTCR2 (1) /* Ser. port 1 UART Control Reg. 2 */
-#define _Ser1UTCR3 _UTCR3 (1) /* Ser. port 1 UART Control Reg. 3 */
-#define _Ser1UTDR _UTDR (1) /* Ser. port 1 UART Data Reg. */
-#define _Ser1UTSR0 _UTSR0 (1) /* Ser. port 1 UART Status Reg. 0 */
-#define _Ser1UTSR1 _UTSR1 (1) /* Ser. port 1 UART Status Reg. 1 */
-
-#define _Ser2UTCR0 _UTCR0 (2) /* Ser. port 2 UART Control Reg. 0 */
-#define _Ser2UTCR1 _UTCR1 (2) /* Ser. port 2 UART Control Reg. 1 */
-#define _Ser2UTCR2 _UTCR2 (2) /* Ser. port 2 UART Control Reg. 2 */
-#define _Ser2UTCR3 _UTCR3 (2) /* Ser. port 2 UART Control Reg. 3 */
-#define _Ser2UTCR4 _UTCR4 (2) /* Ser. port 2 UART Control Reg. 4 */
-#define _Ser2UTDR _UTDR (2) /* Ser. port 2 UART Data Reg. */
-#define _Ser2UTSR0 _UTSR0 (2) /* Ser. port 2 UART Status Reg. 0 */
-#define _Ser2UTSR1 _UTSR1 (2) /* Ser. port 2 UART Status Reg. 1 */
-
-#define _Ser3UTCR0 _UTCR0 (3) /* Ser. port 3 UART Control Reg. 0 */
-#define _Ser3UTCR1 _UTCR1 (3) /* Ser. port 3 UART Control Reg. 1 */
-#define _Ser3UTCR2 _UTCR2 (3) /* Ser. port 3 UART Control Reg. 2 */
-#define _Ser3UTCR3 _UTCR3 (3) /* Ser. port 3 UART Control Reg. 3 */
-#define _Ser3UTDR _UTDR (3) /* Ser. port 3 UART Data Reg. */
-#define _Ser3UTSR0 _UTSR0 (3) /* Ser. port 3 UART Status Reg. 0 */
-#define _Ser3UTSR1 _UTSR1 (3) /* Ser. port 3 UART Status Reg. 1 */
-
-#if LANGUAGE == C
-
-#define Ser1UTCR0 /* Ser. port 1 UART Control Reg. 0 */ \
- (*((volatile Word *) io_p2v (_Ser1UTCR0)))
-#define Ser1UTCR1 /* Ser. port 1 UART Control Reg. 1 */ \
- (*((volatile Word *) io_p2v (_Ser1UTCR1)))
-#define Ser1UTCR2 /* Ser. port 1 UART Control Reg. 2 */ \
- (*((volatile Word *) io_p2v (_Ser1UTCR2)))
-#define Ser1UTCR3 /* Ser. port 1 UART Control Reg. 3 */ \
- (*((volatile Word *) io_p2v (_Ser1UTCR3)))
-#define Ser1UTDR /* Ser. port 1 UART Data Reg. */ \
- (*((volatile Word *) io_p2v (_Ser1UTDR)))
-#define Ser1UTSR0 /* Ser. port 1 UART Status Reg. 0 */ \
- (*((volatile Word *) io_p2v (_Ser1UTSR0)))
-#define Ser1UTSR1 /* Ser. port 1 UART Status Reg. 1 */ \
- (*((volatile Word *) io_p2v (_Ser1UTSR1)))
-
-#define Ser2UTCR0 /* Ser. port 2 UART Control Reg. 0 */ \
- (*((volatile Word *) io_p2v (_Ser2UTCR0)))
-#define Ser2UTCR1 /* Ser. port 2 UART Control Reg. 1 */ \
- (*((volatile Word *) io_p2v (_Ser2UTCR1)))
-#define Ser2UTCR2 /* Ser. port 2 UART Control Reg. 2 */ \
- (*((volatile Word *) io_p2v (_Ser2UTCR2)))
-#define Ser2UTCR3 /* Ser. port 2 UART Control Reg. 3 */ \
- (*((volatile Word *) io_p2v (_Ser2UTCR3)))
-#define Ser2UTCR4 /* Ser. port 2 UART Control Reg. 4 */ \
- (*((volatile Word *) io_p2v (_Ser2UTCR4)))
-#define Ser2UTDR /* Ser. port 2 UART Data Reg. */ \
- (*((volatile Word *) io_p2v (_Ser2UTDR)))
-#define Ser2UTSR0 /* Ser. port 2 UART Status Reg. 0 */ \
- (*((volatile Word *) io_p2v (_Ser2UTSR0)))
-#define Ser2UTSR1 /* Ser. port 2 UART Status Reg. 1 */ \
- (*((volatile Word *) io_p2v (_Ser2UTSR1)))
-
-#define Ser3UTCR0 /* Ser. port 3 UART Control Reg. 0 */ \
- (*((volatile Word *) io_p2v (_Ser3UTCR0)))
-#define Ser3UTCR1 /* Ser. port 3 UART Control Reg. 1 */ \
- (*((volatile Word *) io_p2v (_Ser3UTCR1)))
-#define Ser3UTCR2 /* Ser. port 3 UART Control Reg. 2 */ \
- (*((volatile Word *) io_p2v (_Ser3UTCR2)))
-#define Ser3UTCR3 /* Ser. port 3 UART Control Reg. 3 */ \
- (*((volatile Word *) io_p2v (_Ser3UTCR3)))
-#define Ser3UTDR /* Ser. port 3 UART Data Reg. */ \
- (*((volatile Word *) io_p2v (_Ser3UTDR)))
-#define Ser3UTSR0 /* Ser. port 3 UART Status Reg. 0 */ \
- (*((volatile Word *) io_p2v (_Ser3UTSR0)))
-#define Ser3UTSR1 /* Ser. port 3 UART Status Reg. 1 */ \
- (*((volatile Word *) io_p2v (_Ser3UTSR1)))
-
-#elif LANGUAGE == Assembly
-#define Ser1UTCR0 ( io_p2v (_Ser1UTCR0))
-#define Ser1UTCR1 ( io_p2v (_Ser1UTCR1))
-#define Ser1UTCR2 ( io_p2v (_Ser1UTCR2))
-#define Ser1UTCR3 ( io_p2v (_Ser1UTCR3))
-#define Ser1UTDR ( io_p2v (_Ser1UTDR))
-#define Ser1UTSR0 ( io_p2v (_Ser1UTSR0))
-#define Ser1UTSR1 ( io_p2v (_Ser1UTSR1))
-
-#define Ser2UTCR0 ( io_p2v (_Ser2UTCR0))
-#define Ser2UTCR1 ( io_p2v (_Ser2UTCR1))
-#define Ser2UTCR2 ( io_p2v (_Ser2UTCR2))
-#define Ser2UTCR3 ( io_p2v (_Ser2UTCR3))
-#define Ser2UTCR4 ( io_p2v (_Ser2UTCR4))
-#define Ser2UTDR ( io_p2v (_Ser2UTDR))
-#define Ser2UTSR0 ( io_p2v (_Ser2UTSR0))
-#define Ser2UTSR1 ( io_p2v (_Ser2UTSR1))
-
-#define Ser3UTCR0 ( io_p2v (_Ser3UTCR0))
-#define Ser3UTCR1 ( io_p2v (_Ser3UTCR1))
-#define Ser3UTCR2 ( io_p2v (_Ser3UTCR2))
-#define Ser3UTCR3 ( io_p2v (_Ser3UTCR3))
-#define Ser3UTDR ( io_p2v (_Ser3UTDR))
-#define Ser3UTSR0 ( io_p2v (_Ser3UTSR0))
-#define Ser3UTSR1 ( io_p2v (_Ser3UTSR1))
-
-#endif /* LANGUAGE == C */
-
-#define UTCR0_PE 0x00000001 /* Parity Enable */
-#define UTCR0_OES 0x00000002 /* Odd/Even parity Select */
-#define UTCR0_OddPar (UTCR0_OES*0) /* Odd Parity */
-#define UTCR0_EvenPar (UTCR0_OES*1) /* Even Parity */
-#define UTCR0_SBS 0x00000004 /* Stop Bit Select */
-#define UTCR0_1StpBit (UTCR0_SBS*0) /* 1 Stop Bit per frame */
-#define UTCR0_2StpBit (UTCR0_SBS*1) /* 2 Stop Bits per frame */
-#define UTCR0_DSS 0x00000008 /* Data Size Select */
-#define UTCR0_7BitData (UTCR0_DSS*0) /* 7-Bit Data */
-#define UTCR0_8BitData (UTCR0_DSS*1) /* 8-Bit Data */
-#define UTCR0_SCE 0x00000010 /* Sample Clock Enable */
- /* (ser. port 1: GPIO [18], */
- /* ser. port 3: GPIO [20]) */
-#define UTCR0_RCE 0x00000020 /* Receive Clock Edge select */
-#define UTCR0_RcRsEdg (UTCR0_RCE*0) /* Receive clock Rising-Edge */
-#define UTCR0_RcFlEdg (UTCR0_RCE*1) /* Receive clock Falling-Edge */
-#define UTCR0_TCE 0x00000040 /* Transmit Clock Edge select */
-#define UTCR0_TrRsEdg (UTCR0_TCE*0) /* Transmit clock Rising-Edge */
-#define UTCR0_TrFlEdg (UTCR0_TCE*1) /* Transmit clock Falling-Edge */
-#define UTCR0_Ser2IrDA /* Ser. port 2 IrDA settings */ \
- (UTCR0_1StpBit + UTCR0_8BitData)
-
-#define UTCR1_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */
-#define UTCR2_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */
- /* fua = fxtl/(16*(BRD[11:0] + 1)) */
- /* Tua = 16*(BRD [11:0] + 1)*Txtl */
-#define UTCR1_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
- (((Div) - 16)/16 >> FSize (UTCR2_BRD) << \
- FShft (UTCR1_BRD))
-#define UTCR2_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
- (((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \
- FShft (UTCR2_BRD))
- /* fua = fxtl/(16*Floor (Div/16)) */
- /* Tua = 16*Floor (Div/16)*Txtl */
-#define UTCR1_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
- (((Div) - 1)/16 >> FSize (UTCR2_BRD) << \
- FShft (UTCR1_BRD))
-#define UTCR2_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
- (((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \
- FShft (UTCR2_BRD))
- /* fua = fxtl/(16*Ceil (Div/16)) */
- /* Tua = 16*Ceil (Div/16)*Txtl */
-
-#define UTCR3_RXE 0x00000001 /* Receive Enable */
-#define UTCR3_TXE 0x00000002 /* Transmit Enable */
-#define UTCR3_BRK 0x00000004 /* BReaK mode */
-#define UTCR3_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */
- /* more Interrupt Enable */
-#define UTCR3_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */
- /* Interrupt Enable */
-#define UTCR3_LBM 0x00000020 /* Look-Back Mode */
-#define UTCR3_Ser2IrDA /* Ser. port 2 IrDA settings (RIE, */ \
- /* TIE, LBM can be set or cleared) */ \
- (UTCR3_RXE + UTCR3_TXE)
-
-#define UTCR4_HSE 0x00000001 /* Hewlett-Packard Serial InfraRed */
- /* (HP-SIR) modulation Enable */
-#define UTCR4_NRZ (UTCR4_HSE*0) /* Non-Return to Zero modulation */
-#define UTCR4_HPSIR (UTCR4_HSE*1) /* HP-SIR modulation */
-#define UTCR4_LPM 0x00000002 /* Low-Power Mode */
-#define UTCR4_Z3_16Bit (UTCR4_LPM*0) /* Zero pulse = 3/16 Bit time */
-#define UTCR4_Z1_6us (UTCR4_LPM*1) /* Zero pulse = 1.6 us */
-
-#define UTDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
-#if 0 /* Hidden receive FIFO bits */
-#define UTDR_PRE 0x00000100 /* receive PaRity Error (read) */
-#define UTDR_FRE 0x00000200 /* receive FRaming Error (read) */
-#define UTDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
-#endif /* 0 */
-
-#define UTSR0_TFS 0x00000001 /* Transmit FIFO 1/2-full or less */
- /* Service request (read) */
-#define UTSR0_RFS 0x00000002 /* Receive FIFO 1/3-to-2/3-full or */
- /* more Service request (read) */
-#define UTSR0_RID 0x00000004 /* Receiver IDle */
-#define UTSR0_RBB 0x00000008 /* Receive Beginning of Break */
-#define UTSR0_REB 0x00000010 /* Receive End of Break */
-#define UTSR0_EIF 0x00000020 /* Error In FIFO (read) */
-
-#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */
-#define UTSR1_RNE 0x00000002 /* Receive FIFO Not Empty (read) */
-#define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */
-#define UTSR1_PRE 0x00000008 /* receive PaRity Error (read) */
-#define UTSR1_FRE 0x00000010 /* receive FRaming Error (read) */
-#define UTSR1_ROR 0x00000020 /* Receive FIFO Over-Run (read) */
-
-
-/*
- * Synchronous Data Link Controller (SDLC) control registers
- *
- * Registers
- * Ser1SDCR0 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Control Register 0 (read/write).
- * Ser1SDCR1 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Control Register 1 (read/write).
- * Ser1SDCR2 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Control Register 2 (read/write).
- * Ser1SDCR3 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Control Register 3 (read/write).
- * Ser1SDCR4 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Control Register 4 (read/write).
- * Ser1SDDR Serial port 1 Synchronous Data Link Controller (SDLC)
- * Data Register (read/write).
- * Ser1SDSR0 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Status Register 0 (read/write).
- * Ser1SDSR1 Serial port 1 Synchronous Data Link Controller (SDLC)
- * Status Register 1 (read/write).
- *
- * Clocks
- * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
- * or 3.5795 MHz).
- * fsd, Tsd Frequency, period of the SDLC communication.
- */
-
-#define _Ser1SDCR0 0x80020060 /* Ser. port 1 SDLC Control Reg. 0 */
-#define _Ser1SDCR1 0x80020064 /* Ser. port 1 SDLC Control Reg. 1 */
-#define _Ser1SDCR2 0x80020068 /* Ser. port 1 SDLC Control Reg. 2 */
-#define _Ser1SDCR3 0x8002006C /* Ser. port 1 SDLC Control Reg. 3 */
-#define _Ser1SDCR4 0x80020070 /* Ser. port 1 SDLC Control Reg. 4 */
-#define _Ser1SDDR 0x80020078 /* Ser. port 1 SDLC Data Reg. */
-#define _Ser1SDSR0 0x80020080 /* Ser. port 1 SDLC Status Reg. 0 */
-#define _Ser1SDSR1 0x80020084 /* Ser. port 1 SDLC Status Reg. 1 */
-
-#if LANGUAGE == C
-#define Ser1SDCR0 /* Ser. port 1 SDLC Control Reg. 0 */ \
- (*((volatile Word *) io_p2v (_Ser1SDCR0)))
-#define Ser1SDCR1 /* Ser. port 1 SDLC Control Reg. 1 */ \
- (*((volatile Word *) io_p2v (_Ser1SDCR1)))
-#define Ser1SDCR2 /* Ser. port 1 SDLC Control Reg. 2 */ \
- (*((volatile Word *) io_p2v (_Ser1SDCR2)))
-#define Ser1SDCR3 /* Ser. port 1 SDLC Control Reg. 3 */ \
- (*((volatile Word *) io_p2v (_Ser1SDCR3)))
-#define Ser1SDCR4 /* Ser. port 1 SDLC Control Reg. 4 */ \
- (*((volatile Word *) io_p2v (_Ser1SDCR4)))
-#define Ser1SDDR /* Ser. port 1 SDLC Data Reg. */ \
- (*((volatile Word *) io_p2v (_Ser1SDDR)))
-#define Ser1SDSR0 /* Ser. port 1 SDLC Status Reg. 0 */ \
- (*((volatile Word *) io_p2v (_Ser1SDSR0)))
-#define Ser1SDSR1 /* Ser. port 1 SDLC Status Reg. 1 */ \
- (*((volatile Word *) io_p2v (_Ser1SDSR1)))
-#endif /* LANGUAGE == C */
-
-#define SDCR0_SUS 0x00000001 /* SDLC/UART Select */
-#define SDCR0_SDLC (SDCR0_SUS*0) /* SDLC mode (TXD1 & RXD1) */
-#define SDCR0_UART (SDCR0_SUS*1) /* UART mode (TXD1 & RXD1) */
-#define SDCR0_SDF 0x00000002 /* Single/Double start Flag select */
-#define SDCR0_SglFlg (SDCR0_SDF*0) /* Single start Flag */
-#define SDCR0_DblFlg (SDCR0_SDF*1) /* Double start Flag */
-#define SDCR0_LBM 0x00000004 /* Look-Back Mode */
-#define SDCR0_BMS 0x00000008 /* Bit Modulation Select */
-#define SDCR0_FM0 (SDCR0_BMS*0) /* Freq. Modulation zero (0) */
-#define SDCR0_NRZ (SDCR0_BMS*1) /* Non-Return to Zero modulation */
-#define SDCR0_SCE 0x00000010 /* Sample Clock Enable (GPIO [16]) */
-#define SDCR0_SCD 0x00000020 /* Sample Clock Direction select */
- /* (GPIO [16]) */
-#define SDCR0_SClkIn (SDCR0_SCD*0) /* Sample Clock Input */
-#define SDCR0_SClkOut (SDCR0_SCD*1) /* Sample Clock Output */
-#define SDCR0_RCE 0x00000040 /* Receive Clock Edge select */
-#define SDCR0_RcRsEdg (SDCR0_RCE*0) /* Receive clock Rising-Edge */
-#define SDCR0_RcFlEdg (SDCR0_RCE*1) /* Receive clock Falling-Edge */
-#define SDCR0_TCE 0x00000080 /* Transmit Clock Edge select */
-#define SDCR0_TrRsEdg (SDCR0_TCE*0) /* Transmit clock Rising-Edge */
-#define SDCR0_TrFlEdg (SDCR0_TCE*1) /* Transmit clock Falling-Edge */
-
-#define SDCR1_AAF 0x00000001 /* Abort After Frame enable */
- /* (GPIO [17]) */
-#define SDCR1_TXE 0x00000002 /* Transmit Enable */
-#define SDCR1_RXE 0x00000004 /* Receive Enable */
-#define SDCR1_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */
- /* more Interrupt Enable */
-#define SDCR1_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */
- /* Interrupt Enable */
-#define SDCR1_AME 0x00000020 /* Address Match Enable */
-#define SDCR1_TUS 0x00000040 /* Transmit FIFO Under-run Select */
-#define SDCR1_EFrmURn (SDCR1_TUS*0) /* End Frame on Under-Run */
-#define SDCR1_AbortURn (SDCR1_TUS*1) /* Abort on Under-Run */
-#define SDCR1_RAE 0x00000080 /* Receive Abort interrupt Enable */
-
-#define SDCR2_AMV Fld (8, 0) /* Address Match Value */
-
-#define SDCR3_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */
-#define SDCR4_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */
- /* fsd = fxtl/(16*(BRD[11:0] + 1)) */
- /* Tsd = 16*(BRD[11:0] + 1)*Txtl */
-#define SDCR3_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
- (((Div) - 16)/16 >> FSize (SDCR4_BRD) << \
- FShft (SDCR3_BRD))
-#define SDCR4_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
- (((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \
- FShft (SDCR4_BRD))
- /* fsd = fxtl/(16*Floor (Div/16)) */
- /* Tsd = 16*Floor (Div/16)*Txtl */
-#define SDCR3_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
- (((Div) - 1)/16 >> FSize (SDCR4_BRD) << \
- FShft (SDCR3_BRD))
-#define SDCR4_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
- (((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \
- FShft (SDCR4_BRD))
- /* fsd = fxtl/(16*Ceil (Div/16)) */
- /* Tsd = 16*Ceil (Div/16)*Txtl */
-
-#define SDDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
-#if 0 /* Hidden receive FIFO bits */
-#define SDDR_EOF 0x00000100 /* receive End-Of-Frame (read) */
-#define SDDR_CRE 0x00000200 /* receive CRC Error (read) */
-#define SDDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
-#endif /* 0 */
-
-#define SDSR0_EIF 0x00000001 /* Error In FIFO (read) */
-#define SDSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */
-#define SDSR0_RAB 0x00000004 /* Receive ABort */
-#define SDSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */
- /* Service request (read) */
-#define SDSR0_RFS 0x00000010 /* Receive FIFO 1/3-to-2/3-full or */
- /* more Service request (read) */
-
-#define SDSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */
-#define SDSR1_TBY 0x00000002 /* Transmitter BusY (read) */
-#define SDSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
-#define SDSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */
-#define SDSR1_RTD 0x00000010 /* Receive Transition Detected */
-#define SDSR1_EOF 0x00000020 /* receive End-Of-Frame (read) */
-#define SDSR1_CRE 0x00000040 /* receive CRC Error (read) */
-#define SDSR1_ROR 0x00000080 /* Receive FIFO Over-Run (read) */
-
-
-/*
- * High-Speed Serial to Parallel controller (HSSP) control registers
- *
- * Registers
- * Ser2HSCR0 Serial port 2 High-Speed Serial to Parallel
- * controller (HSSP) Control Register 0 (read/write).
- * Ser2HSCR1 Serial port 2 High-Speed Serial to Parallel
- * controller (HSSP) Control Register 1 (read/write).
- * Ser2HSDR Serial port 2 High-Speed Serial to Parallel
- * controller (HSSP) Data Register (read/write).
- * Ser2HSSR0 Serial port 2 High-Speed Serial to Parallel
- * controller (HSSP) Status Register 0 (read/write).
- * Ser2HSSR1 Serial port 2 High-Speed Serial to Parallel
- * controller (HSSP) Status Register 1 (read).
- * Ser2HSCR2 Serial port 2 High-Speed Serial to Parallel
- * controller (HSSP) Control Register 2 (read/write).
- * [The HSCR2 register is only implemented in
- * versions 2.0 (rev. = 8) and higher of the StrongARM
- * SA-1100.]
- */
-
-#define _Ser2HSCR0 0x80040060 /* Ser. port 2 HSSP Control Reg. 0 */
-#define _Ser2HSCR1 0x80040064 /* Ser. port 2 HSSP Control Reg. 1 */
-#define _Ser2HSDR 0x8004006C /* Ser. port 2 HSSP Data Reg. */
-#define _Ser2HSSR0 0x80040074 /* Ser. port 2 HSSP Status Reg. 0 */
-#define _Ser2HSSR1 0x80040078 /* Ser. port 2 HSSP Status Reg. 1 */
-#define _Ser2HSCR2 0x90060028 /* Ser. port 2 HSSP Control Reg. 2 */
-
-#if LANGUAGE == C
-#define Ser2HSCR0 /* Ser. port 2 HSSP Control Reg. 0 */ \
- (*((volatile Word *) io_p2v (_Ser2HSCR0)))
-#define Ser2HSCR1 /* Ser. port 2 HSSP Control Reg. 1 */ \
- (*((volatile Word *) io_p2v (_Ser2HSCR1)))
-#define Ser2HSDR /* Ser. port 2 HSSP Data Reg. */ \
- (*((volatile Word *) io_p2v (_Ser2HSDR)))
-#define Ser2HSSR0 /* Ser. port 2 HSSP Status Reg. 0 */ \
- (*((volatile Word *) io_p2v (_Ser2HSSR0)))
-#define Ser2HSSR1 /* Ser. port 2 HSSP Status Reg. 1 */ \
- (*((volatile Word *) io_p2v (_Ser2HSSR1)))
-#define Ser2HSCR2 /* Ser. port 2 HSSP Control Reg. 2 */ \
- (*((volatile Word *) io_p2v (_Ser2HSCR2)))
-#endif /* LANGUAGE == C */
-
-#define HSCR0_ITR 0x00000001 /* IrDA Transmission Rate */
-#define HSCR0_UART (HSCR0_ITR*0) /* UART mode (115.2 kb/s if IrDA) */
-#define HSCR0_HSSP (HSCR0_ITR*1) /* HSSP mode (4 Mb/s) */
-#define HSCR0_LBM 0x00000002 /* Look-Back Mode */
-#define HSCR0_TUS 0x00000004 /* Transmit FIFO Under-run Select */
-#define HSCR0_EFrmURn (HSCR0_TUS*0) /* End Frame on Under-Run */
-#define HSCR0_AbortURn (HSCR0_TUS*1) /* Abort on Under-Run */
-#define HSCR0_TXE 0x00000008 /* Transmit Enable */
-#define HSCR0_RXE 0x00000010 /* Receive Enable */
-#define HSCR0_RIE 0x00000020 /* Receive FIFO 2/5-to-3/5-full or */
- /* more Interrupt Enable */
-#define HSCR0_TIE 0x00000040 /* Transmit FIFO 1/2-full or less */
- /* Interrupt Enable */
-#define HSCR0_AME 0x00000080 /* Address Match Enable */
-
-#define HSCR1_AMV Fld (8, 0) /* Address Match Value */
-
-#define HSDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
-#if 0 /* Hidden receive FIFO bits */
-#define HSDR_EOF 0x00000100 /* receive End-Of-Frame (read) */
-#define HSDR_CRE 0x00000200 /* receive CRC Error (read) */
-#define HSDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
-#endif /* 0 */
-
-#define HSSR0_EIF 0x00000001 /* Error In FIFO (read) */
-#define HSSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */
-#define HSSR0_RAB 0x00000004 /* Receive ABort */
-#define HSSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */
- /* Service request (read) */
-#define HSSR0_RFS 0x00000010 /* Receive FIFO 2/5-to-3/5-full or */
- /* more Service request (read) */
-#define HSSR0_FRE 0x00000020 /* receive FRaming Error */
-
-#define HSSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */
-#define HSSR1_TBY 0x00000002 /* Transmitter BusY (read) */
-#define HSSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
-#define HSSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */
-#define HSSR1_EOF 0x00000010 /* receive End-Of-Frame (read) */
-#define HSSR1_CRE 0x00000020 /* receive CRC Error (read) */
-#define HSSR1_ROR 0x00000040 /* Receive FIFO Over-Run (read) */
-
-#define HSCR2_TXP 0x00040000 /* Transmit data Polarity (TXD_2) */
-#define HSCR2_TrDataL (HSCR2_TXP*0) /* Transmit Data active Low */
- /* (inverted) */
-#define HSCR2_TrDataH (HSCR2_TXP*1) /* Transmit Data active High */
- /* (non-inverted) */
-#define HSCR2_RXP 0x00080000 /* Receive data Polarity (RXD_2) */
-#define HSCR2_RcDataL (HSCR2_RXP*0) /* Receive Data active Low */
- /* (inverted) */
-#define HSCR2_RcDataH (HSCR2_RXP*1) /* Receive Data active High */
- /* (non-inverted) */
-
-
-/*
- * Multi-media Communications Port (MCP) control registers
- *
- * Registers
- * Ser4MCCR0 Serial port 4 Multi-media Communications Port (MCP)
- * Control Register 0 (read/write).
- * Ser4MCDR0 Serial port 4 Multi-media Communications Port (MCP)
- * Data Register 0 (audio, read/write).
- * Ser4MCDR1 Serial port 4 Multi-media Communications Port (MCP)
- * Data Register 1 (telecom, read/write).
- * Ser4MCDR2 Serial port 4 Multi-media Communications Port (MCP)
- * Data Register 2 (CODEC registers, read/write).
- * Ser4MCSR Serial port 4 Multi-media Communications Port (MCP)
- * Status Register (read/write).
- * Ser4MCCR1 Serial port 4 Multi-media Communications Port (MCP)
- * Control Register 1 (read/write).
- * [The MCCR1 register is only implemented in
- * versions 2.0 (rev. = 8) and higher of the StrongARM
- * SA-1100.]
- *
- * Clocks
- * fmc, Tmc Frequency, period of the MCP communication (10 MHz,
- * 12 MHz, or GPIO [21]).
- * faud, Taud Frequency, period of the audio sampling.
- * ftcm, Ttcm Frequency, period of the telecom sampling.
- */
-
-#define _Ser4MCCR0 0x80060000 /* Ser. port 4 MCP Control Reg. 0 */
-#define _Ser4MCDR0 0x80060008 /* Ser. port 4 MCP Data Reg. 0 */
- /* (audio) */
-#define _Ser4MCDR1 0x8006000C /* Ser. port 4 MCP Data Reg. 1 */
- /* (telecom) */
-#define _Ser4MCDR2 0x80060010 /* Ser. port 4 MCP Data Reg. 2 */
- /* (CODEC reg.) */
-#define _Ser4MCSR 0x80060018 /* Ser. port 4 MCP Status Reg. */
-#define _Ser4MCCR1 0x90060030 /* Ser. port 4 MCP Control Reg. 1 */
-
-#if LANGUAGE == C
-#define Ser4MCCR0 /* Ser. port 4 MCP Control Reg. 0 */ \
- (*((volatile Word *) io_p2v (_Ser4MCCR0)))
-#define Ser4MCDR0 /* Ser. port 4 MCP Data Reg. 0 */ \
- /* (audio) */ \
- (*((volatile Word *) io_p2v (_Ser4MCDR0)))
-#define Ser4MCDR1 /* Ser. port 4 MCP Data Reg. 1 */ \
- /* (telecom) */ \
- (*((volatile Word *) io_p2v (_Ser4MCDR1)))
-#define Ser4MCDR2 /* Ser. port 4 MCP Data Reg. 2 */ \
- /* (CODEC reg.) */ \
- (*((volatile Word *) io_p2v (_Ser4MCDR2)))
-#define Ser4MCSR /* Ser. port 4 MCP Status Reg. */ \
- (*((volatile Word *) io_p2v (_Ser4MCSR)))
-#define Ser4MCCR1 /* Ser. port 4 MCP Control Reg. 1 */ \
- (*((volatile Word *) io_p2v (_Ser4MCCR1)))
-#endif /* LANGUAGE == C */
-
-#define MCCR0_ASD Fld (7, 0) /* Audio Sampling rate Divisor/32 */
- /* [6..127] */
- /* faud = fmc/(32*ASD) */
- /* Taud = 32*ASD*Tmc */
-#define MCCR0_AudSmpDiv(Div) /* Audio Sampling rate Divisor */ \
- /* [192..4064] */ \
- ((Div)/32 << FShft (MCCR0_ASD))
- /* faud = fmc/(32*Floor (Div/32)) */
- /* Taud = 32*Floor (Div/32)*Tmc */
-#define MCCR0_CeilAudSmpDiv(Div) /* Ceil. of AudSmpDiv [192..4064] */ \
- (((Div) + 31)/32 << FShft (MCCR0_ASD))
- /* faud = fmc/(32*Ceil (Div/32)) */
- /* Taud = 32*Ceil (Div/32)*Tmc */
-#define MCCR0_TSD Fld (7, 8) /* Telecom Sampling rate */
- /* Divisor/32 [16..127] */
- /* ftcm = fmc/(32*TSD) */
- /* Ttcm = 32*TSD*Tmc */
-#define MCCR0_TcmSmpDiv(Div) /* Telecom Sampling rate Divisor */ \
- /* [512..4064] */ \
- ((Div)/32 << FShft (MCCR0_TSD))
- /* ftcm = fmc/(32*Floor (Div/32)) */
- /* Ttcm = 32*Floor (Div/32)*Tmc */
-#define MCCR0_CeilTcmSmpDiv(Div) /* Ceil. of TcmSmpDiv [512..4064] */ \
- (((Div) + 31)/32 << FShft (MCCR0_TSD))
- /* ftcm = fmc/(32*Ceil (Div/32)) */
- /* Ttcm = 32*Ceil (Div/32)*Tmc */
-#define MCCR0_MCE 0x00010000 /* MCP Enable */
-#define MCCR0_ECS 0x00020000 /* External Clock Select */
-#define MCCR0_IntClk (MCCR0_ECS*0) /* Internal Clock (10 or 12 MHz) */
-#define MCCR0_ExtClk (MCCR0_ECS*1) /* External Clock (GPIO [21]) */
-#define MCCR0_ADM 0x00040000 /* A/D (audio/telecom) data */
- /* sampling/storing Mode */
-#define MCCR0_VldBit (MCCR0_ADM*0) /* Valid Bit storing mode */
-#define MCCR0_SmpCnt (MCCR0_ADM*1) /* Sampling Counter storing mode */
-#define MCCR0_TTE 0x00080000 /* Telecom Transmit FIFO 1/2-full */
- /* or less interrupt Enable */
-#define MCCR0_TRE 0x00100000 /* Telecom Receive FIFO 1/2-full */
- /* or more interrupt Enable */
-#define MCCR0_ATE 0x00200000 /* Audio Transmit FIFO 1/2-full */
- /* or less interrupt Enable */
-#define MCCR0_ARE 0x00400000 /* Audio Receive FIFO 1/2-full or */
- /* more interrupt Enable */
-#define MCCR0_LBM 0x00800000 /* Look-Back Mode */
-#define MCCR0_ECP Fld (2, 24) /* External Clock Prescaler - 1 */
-#define MCCR0_ExtClkDiv(Div) /* External Clock Divisor [1..4] */ \
- (((Div) - 1) << FShft (MCCR0_ECP))
-
-#define MCDR0_DATA Fld (12, 4) /* receive/transmit audio DATA */
- /* FIFOs */
-
-#define MCDR1_DATA Fld (14, 2) /* receive/transmit telecom DATA */
- /* FIFOs */
-
- /* receive/transmit CODEC reg. */
- /* FIFOs: */
-#define MCDR2_DATA Fld (16, 0) /* reg. DATA */
-#define MCDR2_RW 0x00010000 /* reg. Read/Write (transmit) */
-#define MCDR2_Rd (MCDR2_RW*0) /* reg. Read */
-#define MCDR2_Wr (MCDR2_RW*1) /* reg. Write */
-#define MCDR2_ADD Fld (4, 17) /* reg. ADDress */
-
-#define MCSR_ATS 0x00000001 /* Audio Transmit FIFO 1/2-full */
- /* or less Service request (read) */
-#define MCSR_ARS 0x00000002 /* Audio Receive FIFO 1/2-full or */
- /* more Service request (read) */
-#define MCSR_TTS 0x00000004 /* Telecom Transmit FIFO 1/2-full */
- /* or less Service request (read) */
-#define MCSR_TRS 0x00000008 /* Telecom Receive FIFO 1/2-full */
- /* or more Service request (read) */
-#define MCSR_ATU 0x00000010 /* Audio Transmit FIFO Under-run */
-#define MCSR_ARO 0x00000020 /* Audio Receive FIFO Over-run */
-#define MCSR_TTU 0x00000040 /* Telecom Transmit FIFO Under-run */
-#define MCSR_TRO 0x00000080 /* Telecom Receive FIFO Over-run */
-#define MCSR_ANF 0x00000100 /* Audio transmit FIFO Not Full */
- /* (read) */
-#define MCSR_ANE 0x00000200 /* Audio receive FIFO Not Empty */
- /* (read) */
-#define MCSR_TNF 0x00000400 /* Telecom transmit FIFO Not Full */
- /* (read) */
-#define MCSR_TNE 0x00000800 /* Telecom receive FIFO Not Empty */
- /* (read) */
-#define MCSR_CWC 0x00001000 /* CODEC register Write Completed */
- /* (read) */
-#define MCSR_CRC 0x00002000 /* CODEC register Read Completed */
- /* (read) */
-#define MCSR_ACE 0x00004000 /* Audio CODEC Enabled (read) */
-#define MCSR_TCE 0x00008000 /* Telecom CODEC Enabled (read) */
-
-#define MCCR1_CFS 0x00100000 /* Clock Freq. Select */
-#define MCCR1_F12MHz (MCCR1_CFS*0) /* Freq. (fmc) = ~ 12 MHz */
- /* (11.981 MHz) */
-#define MCCR1_F10MHz (MCCR1_CFS*1) /* Freq. (fmc) = ~ 10 MHz */
- /* (9.585 MHz) */
-
-
-/*
- * Synchronous Serial Port (SSP) control registers
- *
- * Registers
- * Ser4SSCR0 Serial port 4 Synchronous Serial Port (SSP) Control
- * Register 0 (read/write).
- * Ser4SSCR1 Serial port 4 Synchronous Serial Port (SSP) Control
- * Register 1 (read/write).
- * [Bits SPO and SP are only implemented in versions 2.0
- * (rev. = 8) and higher of the StrongARM SA-1100.]
- * Ser4SSDR Serial port 4 Synchronous Serial Port (SSP) Data
- * Register (read/write).
- * Ser4SSSR Serial port 4 Synchronous Serial Port (SSP) Status
- * Register (read/write).
- *
- * Clocks
- * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
- * or 3.5795 MHz).
- * fss, Tss Frequency, period of the SSP communication.
- */
-
-#define _Ser4SSCR0 0x80070060 /* Ser. port 4 SSP Control Reg. 0 */
-#define _Ser4SSCR1 0x80070064 /* Ser. port 4 SSP Control Reg. 1 */
-#define _Ser4SSDR 0x8007006C /* Ser. port 4 SSP Data Reg. */
-#define _Ser4SSSR 0x80070074 /* Ser. port 4 SSP Status Reg. */
-
-#if LANGUAGE == C
-#define Ser4SSCR0 /* Ser. port 4 SSP Control Reg. 0 */ \
- (*((volatile Word *) io_p2v (_Ser4SSCR0)))
-#define Ser4SSCR1 /* Ser. port 4 SSP Control Reg. 1 */ \
- (*((volatile Word *) io_p2v (_Ser4SSCR1)))
-#define Ser4SSDR /* Ser. port 4 SSP Data Reg. */ \
- (*((volatile Word *) io_p2v (_Ser4SSDR)))
-#define Ser4SSSR /* Ser. port 4 SSP Status Reg. */ \
- (*((volatile Word *) io_p2v (_Ser4SSSR)))
-#endif /* LANGUAGE == C */
-
-#define SSCR0_DSS Fld (4, 0) /* Data Size - 1 Select [3..15] */
-#define SSCR0_DataSize(Size) /* Data Size Select [4..16] */ \
- (((Size) - 1) << FShft (SSCR0_DSS))
-#define SSCR0_FRF Fld (2, 4) /* FRame Format */
-#define SSCR0_Motorola /* Motorola Serial Peripheral */ \
- /* Interface (SPI) format */ \
- (0 << FShft (SSCR0_FRF))
-#define SSCR0_TI /* Texas Instruments Synchronous */ \
- /* Serial format */ \
- (1 << FShft (SSCR0_FRF))
-#define SSCR0_National /* National Microwire format */ \
- (2 << FShft (SSCR0_FRF))
-#define SSCR0_SSE 0x00000080 /* SSP Enable */
-#define SSCR0_SCR Fld (8, 8) /* Serial Clock Rate divisor/2 - 1 */
- /* fss = fxtl/(2*(SCR + 1)) */
- /* Tss = 2*(SCR + 1)*Txtl */
-#define SSCR0_SerClkDiv(Div) /* Serial Clock Divisor [2..512] */ \
- (((Div) - 2)/2 << FShft (SSCR0_SCR))
- /* fss = fxtl/(2*Floor (Div/2)) */
- /* Tss = 2*Floor (Div/2)*Txtl */
-#define SSCR0_CeilSerClkDiv(Div) /* Ceil. of SerClkDiv [2..512] */ \
- (((Div) - 1)/2 << FShft (SSCR0_SCR))
- /* fss = fxtl/(2*Ceil (Div/2)) */
- /* Tss = 2*Ceil (Div/2)*Txtl */
-
-#define SSCR1_RIE 0x00000001 /* Receive FIFO 1/2-full or more */
- /* Interrupt Enable */
-#define SSCR1_TIE 0x00000002 /* Transmit FIFO 1/2-full or less */
- /* Interrupt Enable */
-#define SSCR1_LBM 0x00000004 /* Look-Back Mode */
-#define SSCR1_SPO 0x00000008 /* Sample clock (SCLK) POlarity */
-#define SSCR1_SClkIactL (SSCR1_SPO*0) /* Sample Clock Inactive Low */
-#define SSCR1_SClkIactH (SSCR1_SPO*1) /* Sample Clock Inactive High */
-#define SSCR1_SP 0x00000010 /* Sample clock (SCLK) Phase */
-#define SSCR1_SClk1P (SSCR1_SP*0) /* Sample Clock active 1 Period */
- /* after frame (SFRM, 1st edge) */
-#define SSCR1_SClk1_2P (SSCR1_SP*1) /* Sample Clock active 1/2 Period */
- /* after frame (SFRM, 1st edge) */
-#define SSCR1_ECS 0x00000020 /* External Clock Select */
-#define SSCR1_IntClk (SSCR1_ECS*0) /* Internal Clock */
-#define SSCR1_ExtClk (SSCR1_ECS*1) /* External Clock (GPIO [19]) */
-
-#define SSDR_DATA Fld (16, 0) /* receive/transmit DATA FIFOs */
-
-#define SSSR_TNF 0x00000002 /* Transmit FIFO Not Full (read) */
-#define SSSR_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
-#define SSSR_BSY 0x00000008 /* SSP BuSY (read) */
-#define SSSR_TFS 0x00000010 /* Transmit FIFO 1/2-full or less */
- /* Service request (read) */
-#define SSSR_RFS 0x00000020 /* Receive FIFO 1/2-full or more */
- /* Service request (read) */
-#define SSSR_ROR 0x00000040 /* Receive FIFO Over-Run */
-
-
-/*
- * Operating System (OS) timer control registers
- *
- * Registers
- * OSMR0 Operating System (OS) timer Match Register 0
- * (read/write).
- * OSMR1 Operating System (OS) timer Match Register 1
- * (read/write).
- * OSMR2 Operating System (OS) timer Match Register 2
- * (read/write).
- * OSMR3 Operating System (OS) timer Match Register 3
- * (read/write).
- * OSCR Operating System (OS) timer Counter Register
- * (read/write).
- * OSSR Operating System (OS) timer Status Register
- * (read/write).
- * OWER Operating System (OS) timer Watch-dog Enable Register
- * (read/write).
- * OIER Operating System (OS) timer Interrupt Enable Register
- * (read/write).
- */
-
-#define _OSMR(Nb) /* OS timer Match Reg. [0..3] */ \
- (0x90000000 + (Nb)*4)
-#define _OSMR0 _OSMR (0) /* OS timer Match Reg. 0 */
-#define _OSMR1 _OSMR (1) /* OS timer Match Reg. 1 */
-#define _OSMR2 _OSMR (2) /* OS timer Match Reg. 2 */
-#define _OSMR3 _OSMR (3) /* OS timer Match Reg. 3 */
-#define _OSCR 0x90000010 /* OS timer Counter Reg. */
-#define _OSSR 0x90000014 /* OS timer Status Reg. */
-#define _OWER 0x90000018 /* OS timer Watch-dog Enable Reg. */
-#define _OIER 0x9000001C /* OS timer Interrupt Enable Reg. */
-
-#if LANGUAGE == C
-#define OSMR /* OS timer Match Reg. [0..3] */ \
- ((volatile Word *) io_p2v (_OSMR (0)))
-#define OSMR0 (OSMR [0]) /* OS timer Match Reg. 0 */
-#define OSMR1 (OSMR [1]) /* OS timer Match Reg. 1 */
-#define OSMR2 (OSMR [2]) /* OS timer Match Reg. 2 */
-#define OSMR3 (OSMR [3]) /* OS timer Match Reg. 3 */
-#define OSCR /* OS timer Counter Reg. */ \
- (*((volatile Word *) io_p2v (_OSCR)))
-#define OSSR /* OS timer Status Reg. */ \
- (*((volatile Word *) io_p2v (_OSSR)))
-#define OWER /* OS timer Watch-dog Enable Reg. */ \
- (*((volatile Word *) io_p2v (_OWER)))
-#define OIER /* OS timer Interrupt Enable Reg. */ \
- (*((volatile Word *) io_p2v (_OIER)))
-#endif /* LANGUAGE == C */
-
-#define OSSR_M(Nb) /* Match detected [0..3] */ \
- (0x00000001 << (Nb))
-#define OSSR_M0 OSSR_M (0) /* Match detected 0 */
-#define OSSR_M1 OSSR_M (1) /* Match detected 1 */
-#define OSSR_M2 OSSR_M (2) /* Match detected 2 */
-#define OSSR_M3 OSSR_M (3) /* Match detected 3 */
-
-#define OWER_WME 0x00000001 /* Watch-dog Match Enable */
- /* (set only) */
-
-#define OIER_E(Nb) /* match interrupt Enable [0..3] */ \
- (0x00000001 << (Nb))
-#define OIER_E0 OIER_E (0) /* match interrupt Enable 0 */
-#define OIER_E1 OIER_E (1) /* match interrupt Enable 1 */
-#define OIER_E2 OIER_E (2) /* match interrupt Enable 2 */
-#define OIER_E3 OIER_E (3) /* match interrupt Enable 3 */
-
-
-/*
- * Real-Time Clock (RTC) control registers
- *
- * Registers
- * RTAR Real-Time Clock (RTC) Alarm Register (read/write).
- * RCNR Real-Time Clock (RTC) CouNt Register (read/write).
- * RTTR Real-Time Clock (RTC) Trim Register (read/write).
- * RTSR Real-Time Clock (RTC) Status Register (read/write).
- *
- * Clocks
- * frtx, Trtx Frequency, period of the real-time clock crystal
- * (32.768 kHz nominal).
- * frtc, Trtc Frequency, period of the real-time clock counter
- * (1 Hz nominal).
- */
-
-#define _RTAR 0x90010000 /* RTC Alarm Reg. */
-#define _RCNR 0x90010004 /* RTC CouNt Reg. */
-#define _RTTR 0x90010008 /* RTC Trim Reg. */
-#define _RTSR 0x90010010 /* RTC Status Reg. */
-
-#if LANGUAGE == C
-#define RTAR /* RTC Alarm Reg. */ \
- (*((volatile Word *) io_p2v (_RTAR)))
-#define RCNR /* RTC CouNt Reg. */ \
- (*((volatile Word *) io_p2v (_RCNR)))
-#define RTTR /* RTC Trim Reg. */ \
- (*((volatile Word *) io_p2v (_RTTR)))
-#define RTSR /* RTC Status Reg. */ \
- (*((volatile Word *) io_p2v (_RTSR)))
-#endif /* LANGUAGE == C */
-
-#define RTTR_C Fld (16, 0) /* clock divider Count - 1 */
-#define RTTR_D Fld (10, 16) /* trim Delete count */
- /* frtc = (1023*(C + 1) - D)*frtx/ */
- /* (1023*(C + 1)^2) */
- /* Trtc = (1023*(C + 1)^2)*Trtx/ */
- /* (1023*(C + 1) - D) */
-
-#define RTSR_AL 0x00000001 /* ALarm detected */
-#define RTSR_HZ 0x00000002 /* 1 Hz clock detected */
-#define RTSR_ALE 0x00000004 /* ALarm interrupt Enable */
-#define RTSR_HZE 0x00000008 /* 1 Hz clock interrupt Enable */
-
-
-/*
- * Power Manager (PM) control registers
- *
- * Registers
- * PMCR Power Manager (PM) Control Register (read/write).
- * PSSR Power Manager (PM) Sleep Status Register (read/write).
- * PSPR Power Manager (PM) Scratch-Pad Register (read/write).
- * PWER Power Manager (PM) Wake-up Enable Register
- * (read/write).
- * PCFR Power Manager (PM) general ConFiguration Register
- * (read/write).
- * PPCR Power Manager (PM) Phase-Locked Loop (PLL)
- * Configuration Register (read/write).
- * PGSR Power Manager (PM) General-Purpose Input/Output (GPIO)
- * Sleep state Register (read/write, see GPIO pins).
- * POSR Power Manager (PM) Oscillator Status Register (read).
- *
- * Clocks
- * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
- * or 3.5795 MHz).
- * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
- */
-
-#define _PMCR 0x90020000 /* PM Control Reg. */
-#define _PSSR 0x90020004 /* PM Sleep Status Reg. */
-#define _PSPR 0x90020008 /* PM Scratch-Pad Reg. */
-#define _PWER 0x9002000C /* PM Wake-up Enable Reg. */
-#define _PCFR 0x90020010 /* PM general ConFiguration Reg. */
-#define _PPCR 0x90020014 /* PM PLL Configuration Reg. */
-#define _PGSR 0x90020018 /* PM GPIO Sleep state Reg. */
-#define _POSR 0x9002001C /* PM Oscillator Status Reg. */
-
-#if LANGUAGE == C
-#define PMCR /* PM Control Reg. */ \
- (*((volatile Word *) io_p2v (_PMCR)))
-#define PSSR /* PM Sleep Status Reg. */ \
- (*((volatile Word *) io_p2v (_PSSR)))
-#define PSPR /* PM Scratch-Pad Reg. */ \
- (*((volatile Word *) io_p2v (_PSPR)))
-#define PWER /* PM Wake-up Enable Reg. */ \
- (*((volatile Word *) io_p2v (_PWER)))
-#define PCFR /* PM general ConFiguration Reg. */ \
- (*((volatile Word *) io_p2v (_PCFR)))
-#define PPCR /* PM PLL Configuration Reg. */ \
- (*((volatile Word *) io_p2v (_PPCR)))
-#define PGSR /* PM GPIO Sleep state Reg. */ \
- (*((volatile Word *) io_p2v (_PGSR)))
-#define POSR /* PM Oscillator Status Reg. */ \
- (*((volatile Word *) io_p2v (_POSR)))
-
-#elif LANGUAGE == Assembly
-#define PMCR (io_p2v (_PMCR))
-#define PSSR (io_p2v (_PSSR))
-#define PSPR (io_p2v (_PSPR))
-#define PWER (io_p2v (_PWER))
-#define PCFR (io_p2v (_PCFR))
-#define PPCR (io_p2v (_PPCR))
-#define PGSR (io_p2v (_PGSR))
-#define POSR (io_p2v (_POSR))
-
-#endif /* LANGUAGE == C */
-
-#define PMCR_SF 0x00000001 /* Sleep Force (set only) */
-
-#define PSSR_SS 0x00000001 /* Software Sleep */
-#define PSSR_BFS 0x00000002 /* Battery Fault Status */
- /* (BATT_FAULT) */
-#define PSSR_VFS 0x00000004 /* Vdd Fault Status (VDD_FAULT) */
-#define PSSR_DH 0x00000008 /* DRAM control Hold */
-#define PSSR_PH 0x00000010 /* Peripheral control Hold */
-
-#define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */
-#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
-#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
-#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
-#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
-#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
-#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
-#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
-#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
-#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
-#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
-#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
-#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
-#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
-#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
-#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
-#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
-#define PWER_GPIO16 PWER_GPIO (16) /* GPIO [16] wake-up enable */
-#define PWER_GPIO17 PWER_GPIO (17) /* GPIO [17] wake-up enable */
-#define PWER_GPIO18 PWER_GPIO (18) /* GPIO [18] wake-up enable */
-#define PWER_GPIO19 PWER_GPIO (19) /* GPIO [19] wake-up enable */
-#define PWER_GPIO20 PWER_GPIO (20) /* GPIO [20] wake-up enable */
-#define PWER_GPIO21 PWER_GPIO (21) /* GPIO [21] wake-up enable */
-#define PWER_GPIO22 PWER_GPIO (22) /* GPIO [22] wake-up enable */
-#define PWER_GPIO23 PWER_GPIO (23) /* GPIO [23] wake-up enable */
-#define PWER_GPIO24 PWER_GPIO (24) /* GPIO [24] wake-up enable */
-#define PWER_GPIO25 PWER_GPIO (25) /* GPIO [25] wake-up enable */
-#define PWER_GPIO26 PWER_GPIO (26) /* GPIO [26] wake-up enable */
-#define PWER_GPIO27 PWER_GPIO (27) /* GPIO [27] wake-up enable */
-#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
-
-#define PCFR_OPDE 0x00000001 /* Oscillator Power-Down Enable */
-#define PCFR_ClkRun (PCFR_OPDE*0) /* Clock Running in sleep mode */
-#define PCFR_ClkStp (PCFR_OPDE*1) /* Clock Stopped in sleep mode */
-#define PCFR_FP 0x00000002 /* Float PCMCIA pins */
-#define PCFR_PCMCIANeg (PCFR_FP*0) /* PCMCIA pins Negated (1) */
-#define PCFR_PCMCIAFlt (PCFR_FP*1) /* PCMCIA pins Floating */
-#define PCFR_FS 0x00000004 /* Float Static memory pins */
-#define PCFR_StMemNeg (PCFR_FS*0) /* Static Memory pins Negated (1) */
-#define PCFR_StMemFlt (PCFR_FS*1) /* Static Memory pins Floating */
-#define PCFR_FO 0x00000008 /* Force RTC oscillator */
- /* (32.768 kHz) enable On */
-
-#define PPCR_CCF Fld (5, 0) /* CPU core Clock (CCLK) Freq. */
-#define PPCR_Fx16 /* Freq. x 16 (fcpu = 16*fxtl) */ \
- (0x00 << FShft (PPCR_CCF))
-#define PPCR_Fx20 /* Freq. x 20 (fcpu = 20*fxtl) */ \
- (0x01 << FShft (PPCR_CCF))
-#define PPCR_Fx24 /* Freq. x 24 (fcpu = 24*fxtl) */ \
- (0x02 << FShft (PPCR_CCF))
-#define PPCR_Fx28 /* Freq. x 28 (fcpu = 28*fxtl) */ \
- (0x03 << FShft (PPCR_CCF))
-#define PPCR_Fx32 /* Freq. x 32 (fcpu = 32*fxtl) */ \
- (0x04 << FShft (PPCR_CCF))
-#define PPCR_Fx36 /* Freq. x 36 (fcpu = 36*fxtl) */ \
- (0x05 << FShft (PPCR_CCF))
-#define PPCR_Fx40 /* Freq. x 40 (fcpu = 40*fxtl) */ \
- (0x06 << FShft (PPCR_CCF))
-#define PPCR_Fx44 /* Freq. x 44 (fcpu = 44*fxtl) */ \
- (0x07 << FShft (PPCR_CCF))
-#define PPCR_Fx48 /* Freq. x 48 (fcpu = 48*fxtl) */ \
- (0x08 << FShft (PPCR_CCF))
-#define PPCR_Fx52 /* Freq. x 52 (fcpu = 52*fxtl) */ \
- (0x09 << FShft (PPCR_CCF))
-#define PPCR_Fx56 /* Freq. x 56 (fcpu = 56*fxtl) */ \
- (0x0A << FShft (PPCR_CCF))
-#define PPCR_Fx60 /* Freq. x 60 (fcpu = 60*fxtl) */ \
- (0x0B << FShft (PPCR_CCF))
-#define PPCR_Fx64 /* Freq. x 64 (fcpu = 64*fxtl) */ \
- (0x0C << FShft (PPCR_CCF))
-#define PPCR_Fx68 /* Freq. x 68 (fcpu = 68*fxtl) */ \
- (0x0D << FShft (PPCR_CCF))
-#define PPCR_Fx72 /* Freq. x 72 (fcpu = 72*fxtl) */ \
- (0x0E << FShft (PPCR_CCF))
-#define PPCR_Fx76 /* Freq. x 76 (fcpu = 76*fxtl) */ \
- (0x0F << FShft (PPCR_CCF))
- /* 3.6864 MHz crystal (fxtl): */
-#define PPCR_F59_0MHz PPCR_Fx16 /* Freq. (fcpu) = 59.0 MHz */
-#define PPCR_F73_7MHz PPCR_Fx20 /* Freq. (fcpu) = 73.7 MHz */
-#define PPCR_F88_5MHz PPCR_Fx24 /* Freq. (fcpu) = 88.5 MHz */
-#define PPCR_F103_2MHz PPCR_Fx28 /* Freq. (fcpu) = 103.2 MHz */
-#define PPCR_F118_0MHz PPCR_Fx32 /* Freq. (fcpu) = 118.0 MHz */
-#define PPCR_F132_7MHz PPCR_Fx36 /* Freq. (fcpu) = 132.7 MHz */
-#define PPCR_F147_5MHz PPCR_Fx40 /* Freq. (fcpu) = 147.5 MHz */
-#define PPCR_F162_2MHz PPCR_Fx44 /* Freq. (fcpu) = 162.2 MHz */
-#define PPCR_F176_9MHz PPCR_Fx48 /* Freq. (fcpu) = 176.9 MHz */
-#define PPCR_F191_7MHz PPCR_Fx52 /* Freq. (fcpu) = 191.7 MHz */
-#define PPCR_F206_4MHz PPCR_Fx56 /* Freq. (fcpu) = 206.4 MHz */
-#define PPCR_F221_2MHz PPCR_Fx60 /* Freq. (fcpu) = 221.2 MHz */
-#define PPCR_F239_6MHz PPCR_Fx64 /* Freq. (fcpu) = 239.6 MHz */
-#define PPCR_F250_7MHz PPCR_Fx68 /* Freq. (fcpu) = 250.7 MHz */
-#define PPCR_F265_4MHz PPCR_Fx72 /* Freq. (fcpu) = 265.4 MHz */
-#define PPCR_F280_2MHz PPCR_Fx76 /* Freq. (fcpu) = 280.2 MHz */
- /* 3.5795 MHz crystal (fxtl): */
-#define PPCR_F57_3MHz PPCR_Fx16 /* Freq. (fcpu) = 57.3 MHz */
-#define PPCR_F71_6MHz PPCR_Fx20 /* Freq. (fcpu) = 71.6 MHz */
-#define PPCR_F85_9MHz PPCR_Fx24 /* Freq. (fcpu) = 85.9 MHz */
-#define PPCR_F100_2MHz PPCR_Fx28 /* Freq. (fcpu) = 100.2 MHz */
-#define PPCR_F114_5MHz PPCR_Fx32 /* Freq. (fcpu) = 114.5 MHz */
-#define PPCR_F128_9MHz PPCR_Fx36 /* Freq. (fcpu) = 128.9 MHz */
-#define PPCR_F143_2MHz PPCR_Fx40 /* Freq. (fcpu) = 143.2 MHz */
-#define PPCR_F157_5MHz PPCR_Fx44 /* Freq. (fcpu) = 157.5 MHz */
-#define PPCR_F171_8MHz PPCR_Fx48 /* Freq. (fcpu) = 171.8 MHz */
-#define PPCR_F186_1MHz PPCR_Fx52 /* Freq. (fcpu) = 186.1 MHz */
-#define PPCR_F200_5MHz PPCR_Fx56 /* Freq. (fcpu) = 200.5 MHz */
-#define PPCR_F214_8MHz PPCR_Fx60 /* Freq. (fcpu) = 214.8 MHz */
-#define PPCR_F229_1MHz PPCR_Fx64 /* Freq. (fcpu) = 229.1 MHz */
-#define PPCR_F243_4MHz PPCR_Fx68 /* Freq. (fcpu) = 243.4 MHz */
-#define PPCR_F257_7MHz PPCR_Fx72 /* Freq. (fcpu) = 257.7 MHz */
-#define PPCR_F272_0MHz PPCR_Fx76 /* Freq. (fcpu) = 272.0 MHz */
-
-#define POSR_OOK 0x00000001 /* RTC Oscillator (32.768 kHz) OK */
-
-
-/*
- * Reset Controller (RC) control registers
- *
- * Registers
- * RSRR Reset Controller (RC) Software Reset Register
- * (read/write).
- * RCSR Reset Controller (RC) Status Register (read/write).
- */
-
-#define _RSRR 0x90030000 /* RC Software Reset Reg. */
-#define _RCSR 0x90030004 /* RC Status Reg. */
-
-#if LANGUAGE == C
-#define RSRR /* RC Software Reset Reg. */ \
- (*((volatile Word *) io_p2v (_RSRR)))
-#define RCSR /* RC Status Reg. */ \
- (*((volatile Word *) io_p2v (_RCSR)))
-#endif /* LANGUAGE == C */
-
-#define RSRR_SWR 0x00000001 /* SoftWare Reset (set only) */
-
-#define RCSR_HWR 0x00000001 /* HardWare Reset */
-#define RCSR_SWR 0x00000002 /* SoftWare Reset */
-#define RCSR_WDR 0x00000004 /* Watch-Dog Reset */
-#define RCSR_SMR 0x00000008 /* Sleep-Mode Reset */
-
-
-/*
- * Test unit control registers
- *
- * Registers
- * TUCR Test Unit Control Register (read/write).
- */
-
-#define _TUCR 0x90030008 /* Test Unit Control Reg. */
-
-#if LANGUAGE == C
-#define TUCR /* Test Unit Control Reg. */ \
- (*((volatile Word *) io_p2v (_TUCR)))
-#endif /* LANGUAGE == C */
-
-#define TUCR_TIC 0x00000040 /* TIC mode */
-#define TUCR_TTST 0x00000080 /* Trim TeST mode */
-#define TUCR_RCRC 0x00000100 /* Richard's Cyclic Redundancy */
- /* Check */
-#define TUCR_PMD 0x00000200 /* Power Management Disable */
-#define TUCR_MR 0x00000400 /* Memory Request mode */
-#define TUCR_NoMB (TUCR_MR*0) /* No Memory Bus request & grant */
-#define TUCR_MBGPIO (TUCR_MR*1) /* Memory Bus request (MBREQ) & */
- /* grant (MBGNT) on GPIO [22:21] */
-#define TUCR_CTB Fld (3, 20) /* Clock Test Bits */
-#define TUCR_FDC 0x00800000 /* RTC Force Delete Count */
-#define TUCR_FMC 0x01000000 /* Force Michelle's Control mode */
-#define TUCR_TMC 0x02000000 /* RTC Trimmer Multiplexer Control */
-#define TUCR_DPS 0x04000000 /* Disallow Pad Sleep */
-#define TUCR_TSEL Fld (3, 29) /* clock Test SELect on GPIO [27] */
-#define TUCR_32_768kHz /* 32.768 kHz osc. on GPIO [27] */ \
- (0 << FShft (TUCR_TSEL))
-#define TUCR_3_6864MHz /* 3.6864 MHz osc. on GPIO [27] */ \
- (1 << FShft (TUCR_TSEL))
-#define TUCR_VDD /* VDD ring osc./16 on GPIO [27] */ \
- (2 << FShft (TUCR_TSEL))
-#define TUCR_96MHzPLL /* 96 MHz PLL/4 on GPIO [27] */ \
- (3 << FShft (TUCR_TSEL))
-#define TUCR_Clock /* internal (fcpu/2) & 32.768 kHz */ \
- /* Clocks on GPIO [26:27] */ \
- (4 << FShft (TUCR_TSEL))
-#define TUCR_3_6864MHzA /* 3.6864 MHz osc. on GPIO [27] */ \
- /* (Alternative) */ \
- (5 << FShft (TUCR_TSEL))
-#define TUCR_MainPLL /* Main PLL/16 on GPIO [27] */ \
- (6 << FShft (TUCR_TSEL))
-#define TUCR_VDDL /* VDDL ring osc./4 on GPIO [27] */ \
- (7 << FShft (TUCR_TSEL))
-
-
-/*
- * General-Purpose Input/Output (GPIO) control registers
- *
- * Registers
- * GPLR General-Purpose Input/Output (GPIO) Pin Level
- * Register (read).
- * GPDR General-Purpose Input/Output (GPIO) Pin Direction
- * Register (read/write).
- * GPSR General-Purpose Input/Output (GPIO) Pin output Set
- * Register (write).
- * GPCR General-Purpose Input/Output (GPIO) Pin output Clear
- * Register (write).
- * GRER General-Purpose Input/Output (GPIO) Rising-Edge
- * detect Register (read/write).
- * GFER General-Purpose Input/Output (GPIO) Falling-Edge
- * detect Register (read/write).
- * GEDR General-Purpose Input/Output (GPIO) Edge Detect
- * status Register (read/write).
- * GAFR General-Purpose Input/Output (GPIO) Alternate
- * Function Register (read/write).
- *
- * Clock
- * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
- */
-
-#define _GPLR 0x90040000 /* GPIO Pin Level Reg. */
-#define _GPDR 0x90040004 /* GPIO Pin Direction Reg. */
-#define _GPSR 0x90040008 /* GPIO Pin output Set Reg. */
-#define _GPCR 0x9004000C /* GPIO Pin output Clear Reg. */
-#define _GRER 0x90040010 /* GPIO Rising-Edge detect Reg. */
-#define _GFER 0x90040014 /* GPIO Falling-Edge detect Reg. */
-#define _GEDR 0x90040018 /* GPIO Edge Detect status Reg. */
-#define _GAFR 0x9004001C /* GPIO Alternate Function Reg. */
-
-#if LANGUAGE == C
-#define GPLR /* GPIO Pin Level Reg. */ \
- (*((volatile Word *) io_p2v (_GPLR)))
-#define GPDR /* GPIO Pin Direction Reg. */ \
- (*((volatile Word *) io_p2v (_GPDR)))
-#define GPSR /* GPIO Pin output Set Reg. */ \
- (*((volatile Word *) io_p2v (_GPSR)))
-#define GPCR /* GPIO Pin output Clear Reg. */ \
- (*((volatile Word *) io_p2v (_GPCR)))
-#define GRER /* GPIO Rising-Edge detect Reg. */ \
- (*((volatile Word *) io_p2v (_GRER)))
-#define GFER /* GPIO Falling-Edge detect Reg. */ \
- (*((volatile Word *) io_p2v (_GFER)))
-#define GEDR /* GPIO Edge Detect status Reg. */ \
- (*((volatile Word *) io_p2v (_GEDR)))
-#define GAFR /* GPIO Alternate Function Reg. */ \
- (*((volatile Word *) io_p2v (_GAFR)))
-#elif LANGUAGE == Assembly
-
-#define GPLR (io_p2v (_GPLR))
-#define GPDR (io_p2v (_GPDR))
-#define GPSR (io_p2v (_GPSR))
-#define GPCR (io_p2v (_GPCR))
-#define GRER (io_p2v (_GRER))
-#define GFER (io_p2v (_GFER))
-#define GEDR (io_p2v (_GEDR))
-#define GAFR (io_p2v (_GAFR))
-
-#endif /* LANGUAGE == C */
-
-#define GPIO_MIN (0)
-#define GPIO_MAX (27)
-
-#define GPIO_GPIO(Nb) /* GPIO [0..27] */ \
- (0x00000001 << (Nb))
-#define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */
-#define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */
-#define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */
-#define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */
-#define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */
-#define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */
-#define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */
-#define GPIO_GPIO7 GPIO_GPIO (7) /* GPIO [7] */
-#define GPIO_GPIO8 GPIO_GPIO (8) /* GPIO [8] */
-#define GPIO_GPIO9 GPIO_GPIO (9) /* GPIO [9] */
-#define GPIO_GPIO10 GPIO_GPIO (10) /* GPIO [10] */
-#define GPIO_GPIO11 GPIO_GPIO (11) /* GPIO [11] */
-#define GPIO_GPIO12 GPIO_GPIO (12) /* GPIO [12] */
-#define GPIO_GPIO13 GPIO_GPIO (13) /* GPIO [13] */
-#define GPIO_GPIO14 GPIO_GPIO (14) /* GPIO [14] */
-#define GPIO_GPIO15 GPIO_GPIO (15) /* GPIO [15] */
-#define GPIO_GPIO16 GPIO_GPIO (16) /* GPIO [16] */
-#define GPIO_GPIO17 GPIO_GPIO (17) /* GPIO [17] */
-#define GPIO_GPIO18 GPIO_GPIO (18) /* GPIO [18] */
-#define GPIO_GPIO19 GPIO_GPIO (19) /* GPIO [19] */
-#define GPIO_GPIO20 GPIO_GPIO (20) /* GPIO [20] */
-#define GPIO_GPIO21 GPIO_GPIO (21) /* GPIO [21] */
-#define GPIO_GPIO22 GPIO_GPIO (22) /* GPIO [22] */
-#define GPIO_GPIO23 GPIO_GPIO (23) /* GPIO [23] */
-#define GPIO_GPIO24 GPIO_GPIO (24) /* GPIO [24] */
-#define GPIO_GPIO25 GPIO_GPIO (25) /* GPIO [25] */
-#define GPIO_GPIO26 GPIO_GPIO (26) /* GPIO [26] */
-#define GPIO_GPIO27 GPIO_GPIO (27) /* GPIO [27] */
-
-#define GPIO_LDD(Nb) /* LCD Data [8..15] (O) */ \
- GPIO_GPIO ((Nb) - 6)
-#define GPIO_LDD8 GPIO_LDD (8) /* LCD Data [8] (O) */
-#define GPIO_LDD9 GPIO_LDD (9) /* LCD Data [9] (O) */
-#define GPIO_LDD10 GPIO_LDD (10) /* LCD Data [10] (O) */
-#define GPIO_LDD11 GPIO_LDD (11) /* LCD Data [11] (O) */
-#define GPIO_LDD12 GPIO_LDD (12) /* LCD Data [12] (O) */
-#define GPIO_LDD13 GPIO_LDD (13) /* LCD Data [13] (O) */
-#define GPIO_LDD14 GPIO_LDD (14) /* LCD Data [14] (O) */
-#define GPIO_LDD15 GPIO_LDD (15) /* LCD Data [15] (O) */
- /* ser. port 4: */
-#define GPIO_SSP_TXD GPIO_GPIO (10) /* SSP Transmit Data (O) */
-#define GPIO_SSP_RXD GPIO_GPIO (11) /* SSP Receive Data (I) */
-#define GPIO_SSP_SCLK GPIO_GPIO (12) /* SSP Sample CLocK (O) */
-#define GPIO_SSP_SFRM GPIO_GPIO (13) /* SSP Sample FRaMe (O) */
- /* ser. port 1: */
-#define GPIO_UART_TXD GPIO_GPIO (14) /* UART Transmit Data (O) */
-#define GPIO_UART_RXD GPIO_GPIO (15) /* UART Receive Data (I) */
-#define GPIO_SDLC_SCLK GPIO_GPIO (16) /* SDLC Sample CLocK (I/O) */
-#define GPIO_SDLC_AAF GPIO_GPIO (17) /* SDLC Abort After Frame (O) */
-#define GPIO_UART_SCLK1 GPIO_GPIO (18) /* UART Sample CLocK 1 (I) */
- /* ser. port 4: */
-#define GPIO_SSP_CLK GPIO_GPIO (19) /* SSP external CLocK (I) */
- /* ser. port 3: */
-#define GPIO_UART_SCLK3 GPIO_GPIO (20) /* UART Sample CLocK 3 (I) */
- /* ser. port 4: */
-#define GPIO_MCP_CLK GPIO_GPIO (21) /* MCP CLocK (I) */
- /* test controller: */
-#define GPIO_TIC_ACK GPIO_GPIO (21) /* TIC ACKnowledge (O) */
-#define GPIO_MBGNT GPIO_GPIO (21) /* Memory Bus GraNT (O) */
-#define GPIO_TREQA GPIO_GPIO (22) /* TIC REQuest A (I) */
-#define GPIO_MBREQ GPIO_GPIO (22) /* Memory Bus REQuest (I) */
-#define GPIO_TREQB GPIO_GPIO (23) /* TIC REQuest B (I) */
-#define GPIO_1Hz GPIO_GPIO (25) /* 1 Hz clock (O) */
-#define GPIO_RCLK GPIO_GPIO (26) /* internal (R) CLocK (O, fcpu/2) */
-#define GPIO_32_768kHz GPIO_GPIO (27) /* 32.768 kHz clock (O, RTC) */
-
-#define GPDR_In 0 /* Input */
-#define GPDR_Out 1 /* Output */
-
-
-/*
- * Interrupt Controller (IC) control registers
- *
- * Registers
- * ICIP Interrupt Controller (IC) Interrupt ReQuest (IRQ)
- * Pending register (read).
- * ICMR Interrupt Controller (IC) Mask Register (read/write).
- * ICLR Interrupt Controller (IC) Level Register (read/write).
- * ICCR Interrupt Controller (IC) Control Register
- * (read/write).
- * [The ICCR register is only implemented in versions 2.0
- * (rev. = 8) and higher of the StrongARM SA-1100.]
- * ICFP Interrupt Controller (IC) Fast Interrupt reQuest
- * (FIQ) Pending register (read).
- * ICPR Interrupt Controller (IC) Pending Register (read).
- * [The ICPR register is active low (inverted) in
- * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- * StrongARM SA-1100, it is active high (non-inverted) in
- * versions 2.0 (rev. = 8) and higher.]
- */
-
-#define _ICIP 0x90050000 /* IC IRQ Pending reg. */
-#define _ICMR 0x90050004 /* IC Mask Reg. */
-#define _ICLR 0x90050008 /* IC Level Reg. */
-#define _ICCR 0x9005000C /* IC Control Reg. */
-#define _ICFP 0x90050010 /* IC FIQ Pending reg. */
-#define _ICPR 0x90050020 /* IC Pending Reg. */
-
-#if LANGUAGE == C
-#define ICIP /* IC IRQ Pending reg. */ \
- (*((volatile Word *) io_p2v (_ICIP)))
-#define ICMR /* IC Mask Reg. */ \
- (*((volatile Word *) io_p2v (_ICMR)))
-#define ICLR /* IC Level Reg. */ \
- (*((volatile Word *) io_p2v (_ICLR)))
-#define ICCR /* IC Control Reg. */ \
- (*((volatile Word *) io_p2v (_ICCR)))
-#define ICFP /* IC FIQ Pending reg. */ \
- (*((volatile Word *) io_p2v (_ICFP)))
-#define ICPR /* IC Pending Reg. */ \
- (*((volatile Word *) io_p2v (_ICPR)))
-#endif /* LANGUAGE == C */
-
-#define IC_GPIO(Nb) /* GPIO [0..10] */ \
- (0x00000001 << (Nb))
-#define IC_GPIO0 IC_GPIO (0) /* GPIO [0] */
-#define IC_GPIO1 IC_GPIO (1) /* GPIO [1] */
-#define IC_GPIO2 IC_GPIO (2) /* GPIO [2] */
-#define IC_GPIO3 IC_GPIO (3) /* GPIO [3] */
-#define IC_GPIO4 IC_GPIO (4) /* GPIO [4] */
-#define IC_GPIO5 IC_GPIO (5) /* GPIO [5] */
-#define IC_GPIO6 IC_GPIO (6) /* GPIO [6] */
-#define IC_GPIO7 IC_GPIO (7) /* GPIO [7] */
-#define IC_GPIO8 IC_GPIO (8) /* GPIO [8] */
-#define IC_GPIO9 IC_GPIO (9) /* GPIO [9] */
-#define IC_GPIO10 IC_GPIO (10) /* GPIO [10] */
-#define IC_GPIO11_27 0x00000800 /* GPIO [11:27] (ORed) */
-#define IC_LCD 0x00001000 /* LCD controller */
-#define IC_Ser0UDC 0x00002000 /* Ser. port 0 UDC */
-#define IC_Ser1SDLC 0x00004000 /* Ser. port 1 SDLC */
-#define IC_Ser1UART 0x00008000 /* Ser. port 1 UART */
-#define IC_Ser2ICP 0x00010000 /* Ser. port 2 ICP */
-#define IC_Ser3UART 0x00020000 /* Ser. port 3 UART */
-#define IC_Ser4MCP 0x00040000 /* Ser. port 4 MCP */
-#define IC_Ser4SSP 0x00080000 /* Ser. port 4 SSP */
-#define IC_DMA(Nb) /* DMA controller channel [0..5] */ \
- (0x00100000 << (Nb))
-#define IC_DMA0 IC_DMA (0) /* DMA controller channel 0 */
-#define IC_DMA1 IC_DMA (1) /* DMA controller channel 1 */
-#define IC_DMA2 IC_DMA (2) /* DMA controller channel 2 */
-#define IC_DMA3 IC_DMA (3) /* DMA controller channel 3 */
-#define IC_DMA4 IC_DMA (4) /* DMA controller channel 4 */
-#define IC_DMA5 IC_DMA (5) /* DMA controller channel 5 */
-#define IC_OST(Nb) /* OS Timer match [0..3] */ \
- (0x04000000 << (Nb))
-#define IC_OST0 IC_OST (0) /* OS Timer match 0 */
-#define IC_OST1 IC_OST (1) /* OS Timer match 1 */
-#define IC_OST2 IC_OST (2) /* OS Timer match 2 */
-#define IC_OST3 IC_OST (3) /* OS Timer match 3 */
-#define IC_RTC1Hz 0x40000000 /* RTC 1 Hz clock */
-#define IC_RTCAlrm 0x80000000 /* RTC Alarm */
-
-#define ICLR_IRQ 0 /* Interrupt ReQuest */
-#define ICLR_FIQ 1 /* Fast Interrupt reQuest */
-
-#define ICCR_DIM 0x00000001 /* Disable Idle-mode interrupt */
- /* Mask */
-#define ICCR_IdleAllInt (ICCR_DIM*0) /* Idle-mode All Interrupt enable */
- /* (ICMR ignored) */
-#define ICCR_IdleMskInt (ICCR_DIM*1) /* Idle-mode non-Masked Interrupt */
- /* enable (ICMR used) */
-
-
-/*
- * Peripheral Pin Controller (PPC) control registers
- *
- * Registers
- * PPDR Peripheral Pin Controller (PPC) Pin Direction
- * Register (read/write).
- * PPSR Peripheral Pin Controller (PPC) Pin State Register
- * (read/write).
- * PPAR Peripheral Pin Controller (PPC) Pin Assignment
- * Register (read/write).
- * PSDR Peripheral Pin Controller (PPC) Sleep-mode pin
- * Direction Register (read/write).
- * PPFR Peripheral Pin Controller (PPC) Pin Flag Register
- * (read).
- */
-
-#define _PPDR 0x90060000 /* PPC Pin Direction Reg. */
-#define _PPSR 0x90060004 /* PPC Pin State Reg. */
-#define _PPAR 0x90060008 /* PPC Pin Assignment Reg. */
-#define _PSDR 0x9006000C /* PPC Sleep-mode pin Direction */
- /* Reg. */
-#define _PPFR 0x90060010 /* PPC Pin Flag Reg. */
-
-#if LANGUAGE == C
-#define PPDR /* PPC Pin Direction Reg. */ \
- (*((volatile Word *) io_p2v (_PPDR)))
-#define PPSR /* PPC Pin State Reg. */ \
- (*((volatile Word *) io_p2v (_PPSR)))
-#define PPAR /* PPC Pin Assignment Reg. */ \
- (*((volatile Word *) io_p2v (_PPAR)))
-#define PSDR /* PPC Sleep-mode pin Direction */ \
- /* Reg. */ \
- (*((volatile Word *) io_p2v (_PSDR)))
-#define PPFR /* PPC Pin Flag Reg. */ \
- (*((volatile Word *) io_p2v (_PPFR)))
-#endif /* LANGUAGE == C */
-
-#define PPC_LDD(Nb) /* LCD Data [0..7] */ \
- (0x00000001 << (Nb))
-#define PPC_LDD0 PPC_LDD (0) /* LCD Data [0] */
-#define PPC_LDD1 PPC_LDD (1) /* LCD Data [1] */
-#define PPC_LDD2 PPC_LDD (2) /* LCD Data [2] */
-#define PPC_LDD3 PPC_LDD (3) /* LCD Data [3] */
-#define PPC_LDD4 PPC_LDD (4) /* LCD Data [4] */
-#define PPC_LDD5 PPC_LDD (5) /* LCD Data [5] */
-#define PPC_LDD6 PPC_LDD (6) /* LCD Data [6] */
-#define PPC_LDD7 PPC_LDD (7) /* LCD Data [7] */
-#define PPC_L_PCLK 0x00000100 /* LCD Pixel CLocK */
-#define PPC_L_LCLK 0x00000200 /* LCD Line CLocK */
-#define PPC_L_FCLK 0x00000400 /* LCD Frame CLocK */
-#define PPC_L_BIAS 0x00000800 /* LCD AC BIAS */
- /* ser. port 1: */
-#define PPC_TXD1 0x00001000 /* SDLC/UART Transmit Data 1 */
-#define PPC_RXD1 0x00002000 /* SDLC/UART Receive Data 1 */
- /* ser. port 2: */
-#define PPC_TXD2 0x00004000 /* IPC Transmit Data 2 */
-#define PPC_RXD2 0x00008000 /* IPC Receive Data 2 */
- /* ser. port 3: */
-#define PPC_TXD3 0x00010000 /* UART Transmit Data 3 */
-#define PPC_RXD3 0x00020000 /* UART Receive Data 3 */
- /* ser. port 4: */
-#define PPC_TXD4 0x00040000 /* MCP/SSP Transmit Data 4 */
-#define PPC_RXD4 0x00080000 /* MCP/SSP Receive Data 4 */
-#define PPC_SCLK 0x00100000 /* MCP/SSP Sample CLocK */
-#define PPC_SFRM 0x00200000 /* MCP/SSP Sample FRaMe */
-
-#define PPDR_In 0 /* Input */
-#define PPDR_Out 1 /* Output */
-
- /* ser. port 1: */
-#define PPAR_UPR 0x00001000 /* UART Pin Reassignment */
-#define PPAR_UARTTR (PPAR_UPR*0) /* UART on TXD_1 & RXD_1 */
-#define PPAR_UARTGPIO (PPAR_UPR*1) /* UART on GPIO [14:15] */
- /* ser. port 4: */
-#define PPAR_SPR 0x00040000 /* SSP Pin Reassignment */
-#define PPAR_SSPTRSS (PPAR_SPR*0) /* SSP on TXD_C, RXD_C, SCLK_C, */
- /* & SFRM_C */
-#define PPAR_SSPGPIO (PPAR_SPR*1) /* SSP on GPIO [10:13] */
-
-#define PSDR_OutL 0 /* Output Low in sleep mode */
-#define PSDR_Flt 1 /* Floating (input) in sleep mode */
-
-#define PPFR_LCD 0x00000001 /* LCD controller */
-#define PPFR_SP1TX 0x00001000 /* Ser. Port 1 SDLC/UART Transmit */
-#define PPFR_SP1RX 0x00002000 /* Ser. Port 1 SDLC/UART Receive */
-#define PPFR_SP2TX 0x00004000 /* Ser. Port 2 ICP Transmit */
-#define PPFR_SP2RX 0x00008000 /* Ser. Port 2 ICP Receive */
-#define PPFR_SP3TX 0x00010000 /* Ser. Port 3 UART Transmit */
-#define PPFR_SP3RX 0x00020000 /* Ser. Port 3 UART Receive */
-#define PPFR_SP4 0x00040000 /* Ser. Port 4 MCP/SSP */
-#define PPFR_PerEn 0 /* Peripheral Enabled */
-#define PPFR_PPCEn 1 /* PPC Enabled */
-
-
-/*
- * Dynamic Random-Access Memory (DRAM) control registers
- *
- * Registers
- * MDCNFG Memory system: Dynamic Random-Access Memory (DRAM)
- * CoNFiGuration register (read/write).
- * MDCAS0 Memory system: Dynamic Random-Access Memory (DRAM)
- * Column Address Strobe (CAS) shift register 0
- * (read/write).
- * MDCAS1 Memory system: Dynamic Random-Access Memory (DRAM)
- * Column Address Strobe (CAS) shift register 1
- * (read/write).
- * MDCAS2 Memory system: Dynamic Random-Access Memory (DRAM)
- * Column Address Strobe (CAS) shift register 2
- * (read/write).
- *
- * Clocks
- * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
- * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
- * fcas, Tcas Frequency, period of the DRAM CAS shift registers.
- */
-
- /* Memory system: */
-#define _MDCNFG 0xA0000000 /* DRAM CoNFiGuration reg. */
-#define _MDCAS(Nb) /* DRAM CAS shift reg. [0..3] */ \
- (0xA0000004 + (Nb)*4)
-#define _MDCAS0 _MDCAS (0) /* DRAM CAS shift reg. 0 */
-#define _MDCAS1 _MDCAS (1) /* DRAM CAS shift reg. 1 */
-#define _MDCAS2 _MDCAS (2) /* DRAM CAS shift reg. 2 */
-
-#if LANGUAGE == C
- /* Memory system: */
-#define MDCNFG /* DRAM CoNFiGuration reg. */ \
- (*((volatile Word *) io_p2v (_MDCNFG)))
-#define MDCAS /* DRAM CAS shift reg. [0..3] */ \
- ((volatile Word *) io_p2v (_MDCAS (0)))
-#define MDCAS0 (MDCAS [0]) /* DRAM CAS shift reg. 0 */
-#define MDCAS1 (MDCAS [1]) /* DRAM CAS shift reg. 1 */
-#define MDCAS2 (MDCAS [2]) /* DRAM CAS shift reg. 2 */
-
-#elif LANGUAGE == Assembly
-
-#define MDCNFG (io_p2v(_MDCNFG))
-
-#endif /* LANGUAGE == C */
-
-/* SA1100 MDCNFG values */
-#define MDCNFG_DE(Nb) /* DRAM Enable bank [0..3] */ \
- (0x00000001 << (Nb))
-#define MDCNFG_DE0 MDCNFG_DE (0) /* DRAM Enable bank 0 */
-#define MDCNFG_DE1 MDCNFG_DE (1) /* DRAM Enable bank 1 */
-#define MDCNFG_DE2 MDCNFG_DE (2) /* DRAM Enable bank 2 */
-#define MDCNFG_DE3 MDCNFG_DE (3) /* DRAM Enable bank 3 */
-#define MDCNFG_DRAC Fld (2, 4) /* DRAM Row Address Count - 9 */
-#define MDCNFG_RowAdd(Add) /* Row Address count [9..12] */ \
- (((Add) - 9) << FShft (MDCNFG_DRAC))
-#define MDCNFG_CDB2 0x00000040 /* shift reg. Clock Divide By 2 */
- /* (fcas = fcpu/2) */
-#define MDCNFG_TRP Fld (4, 7) /* Time RAS Pre-charge - 1 [Tmem] */
-#define MDCNFG_PrChrg(Tcpu) /* Pre-Charge time [2..32 Tcpu] */ \
- (((Tcpu) - 2)/2 << FShft (MDCNFG_TRP))
-#define MDCNFG_CeilPrChrg(Tcpu) /* Ceil. of PrChrg [2..32 Tcpu] */ \
- (((Tcpu) - 1)/2 << FShft (MDCNFG_TRP))
-#define MDCNFG_TRASR Fld (4, 11) /* Time RAS Refresh - 1 [Tmem] */
-#define MDCNFG_Ref(Tcpu) /* Refresh time [2..32 Tcpu] */ \
- (((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR))
-#define MDCNFG_CeilRef(Tcpu) /* Ceil. of Ref [2..32 Tcpu] */ \
- (((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR))
-#define MDCNFG_TDL Fld (2, 15) /* Time Data Latch [Tcpu] */
-#define MDCNFG_DataLtch(Tcpu) /* Data Latch delay [0..3 Tcpu] */ \
- ((Tcpu) << FShft (MDCNFG_TDL))
-#define MDCNFG_DRI Fld (15, 17) /* min. DRAM Refresh Interval/4 */
- /* [Tmem] */
-#define MDCNFG_RefInt(Tcpu) /* min. Refresh Interval */ \
- /* [0..262136 Tcpu] */ \
- ((Tcpu)/8 << FShft (MDCNFG_DRI))
-
-/* SA1110 MDCNFG values */
-#define MDCNFG_SA1110_DE0 0x00000001 /* DRAM Enable bank 0 */
-#define MDCNFG_SA1110_DE1 0x00000002 /* DRAM Enable bank 1 */
-#define MDCNFG_SA1110_DTIM0 0x00000004 /* DRAM timing type 0/1 */
-#define MDCNFG_SA1110_DWID0 0x00000008 /* DRAM bus width 0/1 */
-#define MDCNFG_SA1110_DRAC0 Fld(3, 4) /* DRAM row addr bit count */
- /* bank 0/1 */
-#define MDCNFG_SA1110_CDB20 0x00000080 /* Mem Clock divide by 2 0/1 */
-#define MDCNFG_SA1110_TRP0 Fld(3, 8) /* RAS precharge 0/1 */
-#define MDCNFG_SA1110_TDL0 Fld(2, 12) /* Data input latch after CAS*/
- /* deassertion 0/1 */
-#define MDCNFG_SA1110_TWR0 Fld(2, 14) /* SDRAM write recovery 0/1 */
-#define MDCNFG_SA1110_DE2 0x00010000 /* DRAM Enable bank 0 */
-#define MDCNFG_SA1110_DE3 0x00020000 /* DRAM Enable bank 1 */
-#define MDCNFG_SA1110_DTIM2 0x00040000 /* DRAM timing type 0/1 */
-#define MDCNFG_SA1110_DWID2 0x00080000 /* DRAM bus width 0/1 */
-#define MDCNFG_SA1110_DRAC2 Fld(3, 20) /* DRAM row addr bit count */
- /* bank 0/1 */
-#define MDCNFG_SA1110_CDB22 0x00800000 /* Mem Clock divide by 2 0/1 */
-#define MDCNFG_SA1110_TRP2 Fld(3, 24) /* RAS precharge 0/1 */
-#define MDCNFG_SA1110_TDL2 Fld(2, 28) /* Data input latch after CAS*/
- /* deassertion 0/1 */
-#define MDCNFG_SA1110_TWR2 Fld(2, 30) /* SDRAM write recovery 0/1 */
-
-
-/*
- * Static memory control registers
- *
- * Registers
- * MSC0 Memory system: Static memory Control register 0
- * (read/write).
- * MSC1 Memory system: Static memory Control register 1
- * (read/write).
- *
- * Clocks
- * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
- * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
- */
-
- /* Memory system: */
-#define _MSC(Nb) /* Static memory Control reg. */ \
- /* [0..1] */ \
- (0xA0000010 + (Nb)*4)
-#define _MSC0 _MSC (0) /* Static memory Control reg. 0 */
-#define _MSC1 _MSC (1) /* Static memory Control reg. 1 */
-#define _MSC2 0xA000002C /* Static memory Control reg. 2, not contiguous */
-
-#if LANGUAGE == C
- /* Memory system: */
-#define MSC /* Static memory Control reg. */ \
- /* [0..1] */ \
- ((volatile Word *) io_p2v (_MSC (0)))
-#define MSC0 (MSC [0]) /* Static memory Control reg. 0 */
-#define MSC1 (MSC [1]) /* Static memory Control reg. 1 */
-#define MSC2 (*(volatile Word *) io_p2v (_MSC2)) /* Static memory Control reg. 2 */
-
-#elif LANGUAGE == Assembly
-
-#define MSC0 io_p2v(0xa0000010)
-#define MSC1 io_p2v(0xa0000014)
-#define MSC2 io_p2v(0xa000002c)
-
-#endif /* LANGUAGE == C */
-
-#define MSC_Bnk(Nb) /* static memory Bank [0..3] */ \
- Fld (16, ((Nb) Modulo 2)*16)
-#define MSC0_Bnk0 MSC_Bnk (0) /* static memory Bank 0 */
-#define MSC0_Bnk1 MSC_Bnk (1) /* static memory Bank 1 */
-#define MSC1_Bnk2 MSC_Bnk (2) /* static memory Bank 2 */
-#define MSC1_Bnk3 MSC_Bnk (3) /* static memory Bank 3 */
-
-#define MSC_RT Fld (2, 0) /* ROM/static memory Type */
-#define MSC_NonBrst /* Non-Burst static memory */ \
- (0 << FShft (MSC_RT))
-#define MSC_SRAM /* 32-bit byte-writable SRAM */ \
- (1 << FShft (MSC_RT))
-#define MSC_Brst4 /* Burst-of-4 static memory */ \
- (2 << FShft (MSC_RT))
-#define MSC_Brst8 /* Burst-of-8 static memory */ \
- (3 << FShft (MSC_RT))
-#define MSC_RBW 0x0004 /* ROM/static memory Bus Width */
-#define MSC_32BitStMem (MSC_RBW*0) /* 32-Bit Static Memory */
-#define MSC_16BitStMem (MSC_RBW*1) /* 16-Bit Static Memory */
-#define MSC_RDF Fld (5, 3) /* ROM/static memory read Delay */
- /* First access - 1(.5) [Tmem] */
-#define MSC_1stRdAcc(Tcpu) /* 1st Read Access time (burst */ \
- /* static memory) [3..65 Tcpu] */ \
- ((((Tcpu) - 3)/2) << FShft (MSC_RDF))
-#define MSC_Ceil1stRdAcc(Tcpu) /* Ceil. of 1stRdAcc [3..65 Tcpu] */ \
- ((((Tcpu) - 2)/2) << FShft (MSC_RDF))
-#define MSC_RdAcc(Tcpu) /* Read Access time (non-burst */ \
- /* static memory) [2..64 Tcpu] */ \
- ((((Tcpu) - 2)/2) << FShft (MSC_RDF))
-#define MSC_CeilRdAcc(Tcpu) /* Ceil. of RdAcc [2..64 Tcpu] */ \
- ((((Tcpu) - 1)/2) << FShft (MSC_RDF))
-#define MSC_RDN Fld (5, 8) /* ROM/static memory read Delay */
- /* Next access - 1 [Tmem] */
-#define MSC_NxtRdAcc(Tcpu) /* Next Read Access time (burst */ \
- /* static memory) [2..64 Tcpu] */ \
- ((((Tcpu) - 2)/2) << FShft (MSC_RDN))
-#define MSC_CeilNxtRdAcc(Tcpu) /* Ceil. of NxtRdAcc [2..64 Tcpu] */ \
- ((((Tcpu) - 1)/2) << FShft (MSC_RDN))
-#define MSC_WrAcc(Tcpu) /* Write Access time (non-burst */ \
- /* static memory) [2..64 Tcpu] */ \
- ((((Tcpu) - 2)/2) << FShft (MSC_RDN))
-#define MSC_CeilWrAcc(Tcpu) /* Ceil. of WrAcc [2..64 Tcpu] */ \
- ((((Tcpu) - 1)/2) << FShft (MSC_RDN))
-#define MSC_RRR Fld (3, 13) /* ROM/static memory RecoveRy */
- /* time/2 [Tmem] */
-#define MSC_Rec(Tcpu) /* Recovery time [0..28 Tcpu] */ \
- (((Tcpu)/4) << FShft (MSC_RRR))
-#define MSC_CeilRec(Tcpu) /* Ceil. of Rec [0..28 Tcpu] */ \
- ((((Tcpu) + 3)/4) << FShft (MSC_RRR))
-
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) control
- * register
- *
- * Register
- * MECR Memory system: Expansion memory bus (PCMCIA)
- * Configuration Register (read/write).
- *
- * Clocks
- * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
- * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
- * fbclk, Tbclk Frequency, period of the PCMCIA clock (BCLK).
- */
-
- /* Memory system: */
-#define _MECR 0xA0000018 /* Expansion memory bus (PCMCIA) */
- /* Configuration Reg. */
-
-#if LANGUAGE == C
- /* Memory system: */
-#define MECR /* Expansion memory bus (PCMCIA) */ \
- /* Configuration Reg. */ \
- (*((volatile Word *) io_p2v (_MECR)))
-#endif /* LANGUAGE == C */
-
-#define MECR_PCMCIA(Nb) /* PCMCIA [0..1] */ \
- Fld (15, (Nb)*16)
-#define MECR_PCMCIA0 MECR_PCMCIA (0) /* PCMCIA 0 */
-#define MECR_PCMCIA1 MECR_PCMCIA (1) /* PCMCIA 1 */
-
-#define MECR_BSIO Fld (5, 0) /* BCLK Select I/O - 1 [Tmem] */
-#define MECR_IOClk(Tcpu) /* I/O Clock [2..64 Tcpu] */ \
- ((((Tcpu) - 2)/2) << FShft (MECR_BSIO))
-#define MECR_CeilIOClk(Tcpu) /* Ceil. of IOClk [2..64 Tcpu] */ \
- ((((Tcpu) - 1)/2) << FShft (MECR_BSIO))
-#define MECR_BSA Fld (5, 5) /* BCLK Select Attribute - 1 */
- /* [Tmem] */
-#define MECR_AttrClk(Tcpu) /* Attribute Clock [2..64 Tcpu] */ \
- ((((Tcpu) - 2)/2) << FShft (MECR_BSA))
-#define MECR_CeilAttrClk(Tcpu) /* Ceil. of AttrClk [2..64 Tcpu] */ \
- ((((Tcpu) - 1)/2) << FShft (MECR_BSA))
-#define MECR_BSM Fld (5, 10) /* BCLK Select Memory - 1 [Tmem] */
-#define MECR_MemClk(Tcpu) /* Memory Clock [2..64 Tcpu] */ \
- ((((Tcpu) - 2)/2) << FShft (MECR_BSM))
-#define MECR_CeilMemClk(Tcpu) /* Ceil. of MemClk [2..64 Tcpu] */ \
- ((((Tcpu) - 1)/2) << FShft (MECR_BSM))
-
-/*
- * On SA1110 only
- */
-
-#define _MDREFR 0xA000001C
-
-#if LANGUAGE == C
- /* Memory system: */
-#define MDREFR \
- (*((volatile Word *) io_p2v (_MDREFR)))
-
-#elif LANGUAGE == Assembly
-
-#define MDREFR (io_p2v(_MDREFR))
-
-#endif /* LANGUAGE == C */
-
-#define MDREFR_TRASR Fld (4, 0)
-#define MDREFR_DRI Fld (12, 4)
-#define MDREFR_E0PIN (1 << 16)
-#define MDREFR_K0RUN (1 << 17)
-#define MDREFR_K0DB2 (1 << 18)
-#define MDREFR_E1PIN (1 << 20)
-#define MDREFR_K1RUN (1 << 21)
-#define MDREFR_K1DB2 (1 << 22)
-#define MDREFR_K2RUN (1 << 25)
-#define MDREFR_K2DB2 (1 << 26)
-#define MDREFR_EAPD (1 << 28)
-#define MDREFR_KAPD (1 << 29)
-#define MDREFR_SLFRSH (1 << 31)
-
-
-/*
- * Direct Memory Access (DMA) control registers
- *
- * Registers
- * DDAR0 Direct Memory Access (DMA) Device Address Register
- * channel 0 (read/write).
- * DCSR0 Direct Memory Access (DMA) Control and Status
- * Register channel 0 (read/write).
- * DBSA0 Direct Memory Access (DMA) Buffer Start address
- * register A channel 0 (read/write).
- * DBTA0 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 0 (read/write).
- * DBSB0 Direct Memory Access (DMA) Buffer Start address
- * register B channel 0 (read/write).
- * DBTB0 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 0 (read/write).
- *
- * DDAR1 Direct Memory Access (DMA) Device Address Register
- * channel 1 (read/write).
- * DCSR1 Direct Memory Access (DMA) Control and Status
- * Register channel 1 (read/write).
- * DBSA1 Direct Memory Access (DMA) Buffer Start address
- * register A channel 1 (read/write).
- * DBTA1 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 1 (read/write).
- * DBSB1 Direct Memory Access (DMA) Buffer Start address
- * register B channel 1 (read/write).
- * DBTB1 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 1 (read/write).
- *
- * DDAR2 Direct Memory Access (DMA) Device Address Register
- * channel 2 (read/write).
- * DCSR2 Direct Memory Access (DMA) Control and Status
- * Register channel 2 (read/write).
- * DBSA2 Direct Memory Access (DMA) Buffer Start address
- * register A channel 2 (read/write).
- * DBTA2 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 2 (read/write).
- * DBSB2 Direct Memory Access (DMA) Buffer Start address
- * register B channel 2 (read/write).
- * DBTB2 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 2 (read/write).
- *
- * DDAR3 Direct Memory Access (DMA) Device Address Register
- * channel 3 (read/write).
- * DCSR3 Direct Memory Access (DMA) Control and Status
- * Register channel 3 (read/write).
- * DBSA3 Direct Memory Access (DMA) Buffer Start address
- * register A channel 3 (read/write).
- * DBTA3 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 3 (read/write).
- * DBSB3 Direct Memory Access (DMA) Buffer Start address
- * register B channel 3 (read/write).
- * DBTB3 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 3 (read/write).
- *
- * DDAR4 Direct Memory Access (DMA) Device Address Register
- * channel 4 (read/write).
- * DCSR4 Direct Memory Access (DMA) Control and Status
- * Register channel 4 (read/write).
- * DBSA4 Direct Memory Access (DMA) Buffer Start address
- * register A channel 4 (read/write).
- * DBTA4 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 4 (read/write).
- * DBSB4 Direct Memory Access (DMA) Buffer Start address
- * register B channel 4 (read/write).
- * DBTB4 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 4 (read/write).
- *
- * DDAR5 Direct Memory Access (DMA) Device Address Register
- * channel 5 (read/write).
- * DCSR5 Direct Memory Access (DMA) Control and Status
- * Register channel 5 (read/write).
- * DBSA5 Direct Memory Access (DMA) Buffer Start address
- * register A channel 5 (read/write).
- * DBTA5 Direct Memory Access (DMA) Buffer Transfer count
- * register A channel 5 (read/write).
- * DBSB5 Direct Memory Access (DMA) Buffer Start address
- * register B channel 5 (read/write).
- * DBTB5 Direct Memory Access (DMA) Buffer Transfer count
- * register B channel 5 (read/write).
- */
-
-#define DMASp 0x00000020 /* DMA control reg. Space [byte] */
-
-#define _DDAR(Nb) /* DMA Device Address Reg. */ \
- /* channel [0..5] */ \
- (0xB0000000 + (Nb)*DMASp)
-#define _SetDCSR(Nb) /* Set DMA Control & Status Reg. */ \
- /* channel [0..5] (write) */ \
- (0xB0000004 + (Nb)*DMASp)
-#define _ClrDCSR(Nb) /* Clear DMA Control & Status Reg. */ \
- /* channel [0..5] (write) */ \
- (0xB0000008 + (Nb)*DMASp)
-#define _RdDCSR(Nb) /* Read DMA Control & Status Reg. */ \
- /* channel [0..5] (read) */ \
- (0xB000000C + (Nb)*DMASp)
-#define _DBSA(Nb) /* DMA Buffer Start address reg. A */ \
- /* channel [0..5] */ \
- (0xB0000010 + (Nb)*DMASp)
-#define _DBTA(Nb) /* DMA Buffer Transfer count */ \
- /* reg. A channel [0..5] */ \
- (0xB0000014 + (Nb)*DMASp)
-#define _DBSB(Nb) /* DMA Buffer Start address reg. B */ \
- /* channel [0..5] */ \
- (0xB0000018 + (Nb)*DMASp)
-#define _DBTB(Nb) /* DMA Buffer Transfer count */ \
- /* reg. B channel [0..5] */ \
- (0xB000001C + (Nb)*DMASp)
-
-#define _DDAR0 _DDAR (0) /* DMA Device Address Reg. */
- /* channel 0 */
-#define _SetDCSR0 _SetDCSR (0) /* Set DMA Control & Status Reg. */
- /* channel 0 (write) */
-#define _ClrDCSR0 _ClrDCSR (0) /* Clear DMA Control & Status Reg. */
- /* channel 0 (write) */
-#define _RdDCSR0 _RdDCSR (0) /* Read DMA Control & Status Reg. */
- /* channel 0 (read) */
-#define _DBSA0 _DBSA (0) /* DMA Buffer Start address reg. A */
- /* channel 0 */
-#define _DBTA0 _DBTA (0) /* DMA Buffer Transfer count */
- /* reg. A channel 0 */
-#define _DBSB0 _DBSB (0) /* DMA Buffer Start address reg. B */
- /* channel 0 */
-#define _DBTB0 _DBTB (0) /* DMA Buffer Transfer count */
- /* reg. B channel 0 */
-
-#define _DDAR1 _DDAR (1) /* DMA Device Address Reg. */
- /* channel 1 */
-#define _SetDCSR1 _SetDCSR (1) /* Set DMA Control & Status Reg. */
- /* channel 1 (write) */
-#define _ClrDCSR1 _ClrDCSR (1) /* Clear DMA Control & Status Reg. */
- /* channel 1 (write) */
-#define _RdDCSR1 _RdDCSR (1) /* Read DMA Control & Status Reg. */
- /* channel 1 (read) */
-#define _DBSA1 _DBSA (1) /* DMA Buffer Start address reg. A */
- /* channel 1 */
-#define _DBTA1 _DBTA (1) /* DMA Buffer Transfer count */
- /* reg. A channel 1 */
-#define _DBSB1 _DBSB (1) /* DMA Buffer Start address reg. B */
- /* channel 1 */
-#define _DBTB1 _DBTB (1) /* DMA Buffer Transfer count */
- /* reg. B channel 1 */
-
-#define _DDAR2 _DDAR (2) /* DMA Device Address Reg. */
- /* channel 2 */
-#define _SetDCSR2 _SetDCSR (2) /* Set DMA Control & Status Reg. */
- /* channel 2 (write) */
-#define _ClrDCSR2 _ClrDCSR (2) /* Clear DMA Control & Status Reg. */
- /* channel 2 (write) */
-#define _RdDCSR2 _RdDCSR (2) /* Read DMA Control & Status Reg. */
- /* channel 2 (read) */
-#define _DBSA2 _DBSA (2) /* DMA Buffer Start address reg. A */
- /* channel 2 */
-#define _DBTA2 _DBTA (2) /* DMA Buffer Transfer count */
- /* reg. A channel 2 */
-#define _DBSB2 _DBSB (2) /* DMA Buffer Start address reg. B */
- /* channel 2 */
-#define _DBTB2 _DBTB (2) /* DMA Buffer Transfer count */
- /* reg. B channel 2 */
-
-#define _DDAR3 _DDAR (3) /* DMA Device Address Reg. */
- /* channel 3 */
-#define _SetDCSR3 _SetDCSR (3) /* Set DMA Control & Status Reg. */
- /* channel 3 (write) */
-#define _ClrDCSR3 _ClrDCSR (3) /* Clear DMA Control & Status Reg. */
- /* channel 3 (write) */
-#define _RdDCSR3 _RdDCSR (3) /* Read DMA Control & Status Reg. */
- /* channel 3 (read) */
-#define _DBSA3 _DBSA (3) /* DMA Buffer Start address reg. A */
- /* channel 3 */
-#define _DBTA3 _DBTA (3) /* DMA Buffer Transfer count */
- /* reg. A channel 3 */
-#define _DBSB3 _DBSB (3) /* DMA Buffer Start address reg. B */
- /* channel 3 */
-#define _DBTB3 _DBTB (3) /* DMA Buffer Transfer count */
- /* reg. B channel 3 */
-
-#define _DDAR4 _DDAR (4) /* DMA Device Address Reg. */
- /* channel 4 */
-#define _SetDCSR4 _SetDCSR (4) /* Set DMA Control & Status Reg. */
- /* channel 4 (write) */
-#define _ClrDCSR4 _ClrDCSR (4) /* Clear DMA Control & Status Reg. */
- /* channel 4 (write) */
-#define _RdDCSR4 _RdDCSR (4) /* Read DMA Control & Status Reg. */
- /* channel 4 (read) */
-#define _DBSA4 _DBSA (4) /* DMA Buffer Start address reg. A */
- /* channel 4 */
-#define _DBTA4 _DBTA (4) /* DMA Buffer Transfer count */
- /* reg. A channel 4 */
-#define _DBSB4 _DBSB (4) /* DMA Buffer Start address reg. B */
- /* channel 4 */
-#define _DBTB4 _DBTB (4) /* DMA Buffer Transfer count */
- /* reg. B channel 4 */
-
-#define _DDAR5 _DDAR (5) /* DMA Device Address Reg. */
- /* channel 5 */
-#define _SetDCSR5 _SetDCSR (5) /* Set DMA Control & Status Reg. */
- /* channel 5 (write) */
-#define _ClrDCSR5 _ClrDCSR (5) /* Clear DMA Control & Status Reg. */
- /* channel 5 (write) */
-#define _RdDCSR5 _RdDCSR (5) /* Read DMA Control & Status Reg. */
- /* channel 5 (read) */
-#define _DBSA5 _DBSA (5) /* DMA Buffer Start address reg. A */
- /* channel 5 */
-#define _DBTA5 _DBTA (5) /* DMA Buffer Transfer count */
- /* reg. A channel 5 */
-#define _DBSB5 _DBSB (5) /* DMA Buffer Start address reg. B */
- /* channel 5 */
-#define _DBTB5 _DBTB (5) /* DMA Buffer Transfer count */
- /* reg. B channel 5 */
-
-#if LANGUAGE == C
-
-#define DDAR0 /* DMA Device Address Reg. */ \
- /* channel 0 */ \
- (*((volatile Word *) io_p2v (_DDAR0)))
-#define SetDCSR0 /* Set DMA Control & Status Reg. */ \
- /* channel 0 (write) */ \
- (*((volatile Word *) io_p2v (_SetDCSR0)))
-#define ClrDCSR0 /* Clear DMA Control & Status Reg. */ \
- /* channel 0 (write) */ \
- (*((volatile Word *) io_p2v (_ClrDCSR0)))
-#define RdDCSR0 /* Read DMA Control & Status Reg. */ \
- /* channel 0 (read) */ \
- (*((volatile Word *) io_p2v (_RdDCSR0)))
-#define DBSA0 /* DMA Buffer Start address reg. A */ \
- /* channel 0 */ \
- (*((volatile Address *) io_p2v (_DBSA0)))
-#define DBTA0 /* DMA Buffer Transfer count */ \
- /* reg. A channel 0 */ \
- (*((volatile Word *) io_p2v (_DBTA0)))
-#define DBSB0 /* DMA Buffer Start address reg. B */ \
- /* channel 0 */ \
- (*((volatile Address *) io_p2v (_DBSB0)))
-#define DBTB0 /* DMA Buffer Transfer count */ \
- /* reg. B channel 0 */ \
- (*((volatile Word *) io_p2v (_DBTB0)))
-
-#define DDAR1 /* DMA Device Address Reg. */ \
- /* channel 1 */ \
- (*((volatile Word *) io_p2v (_DDAR1)))
-#define SetDCSR1 /* Set DMA Control & Status Reg. */ \
- /* channel 1 (write) */ \
- (*((volatile Word *) io_p2v (_SetDCSR1)))
-#define ClrDCSR1 /* Clear DMA Control & Status Reg. */ \
- /* channel 1 (write) */ \
- (*((volatile Word *) io_p2v (_ClrDCSR1)))
-#define RdDCSR1 /* Read DMA Control & Status Reg. */ \
- /* channel 1 (read) */ \
- (*((volatile Word *) io_p2v (_RdDCSR1)))
-#define DBSA1 /* DMA Buffer Start address reg. A */ \
- /* channel 1 */ \
- (*((volatile Address *) io_p2v (_DBSA1)))
-#define DBTA1 /* DMA Buffer Transfer count */ \
- /* reg. A channel 1 */ \
- (*((volatile Word *) io_p2v (_DBTA1)))
-#define DBSB1 /* DMA Buffer Start address reg. B */ \
- /* channel 1 */ \
- (*((volatile Address *) io_p2v (_DBSB1)))
-#define DBTB1 /* DMA Buffer Transfer count */ \
- /* reg. B channel 1 */ \
- (*((volatile Word *) io_p2v (_DBTB1)))
-
-#define DDAR2 /* DMA Device Address Reg. */ \
- /* channel 2 */ \
- (*((volatile Word *) io_p2v (_DDAR2)))
-#define SetDCSR2 /* Set DMA Control & Status Reg. */ \
- /* channel 2 (write) */ \
- (*((volatile Word *) io_p2v (_SetDCSR2)))
-#define ClrDCSR2 /* Clear DMA Control & Status Reg. */ \
- /* channel 2 (write) */ \
- (*((volatile Word *) io_p2v (_ClrDCSR2)))
-#define RdDCSR2 /* Read DMA Control & Status Reg. */ \
- /* channel 2 (read) */ \
- (*((volatile Word *) io_p2v (_RdDCSR2)))
-#define DBSA2 /* DMA Buffer Start address reg. A */ \
- /* channel 2 */ \
- (*((volatile Address *) io_p2v (_DBSA2)))
-#define DBTA2 /* DMA Buffer Transfer count */ \
- /* reg. A channel 2 */ \
- (*((volatile Word *) io_p2v (_DBTA2)))
-#define DBSB2 /* DMA Buffer Start address reg. B */ \
- /* channel 2 */ \
- (*((volatile Address *) io_p2v (_DBSB2)))
-#define DBTB2 /* DMA Buffer Transfer count */ \
- /* reg. B channel 2 */ \
- (*((volatile Word *) io_p2v (_DBTB2)))
-
-#define DDAR3 /* DMA Device Address Reg. */ \
- /* channel 3 */ \
- (*((volatile Word *) io_p2v (_DDAR3)))
-#define SetDCSR3 /* Set DMA Control & Status Reg. */ \
- /* channel 3 (write) */ \
- (*((volatile Word *) io_p2v (_SetDCSR3)))
-#define ClrDCSR3 /* Clear DMA Control & Status Reg. */ \
- /* channel 3 (write) */ \
- (*((volatile Word *) io_p2v (_ClrDCSR3)))
-#define RdDCSR3 /* Read DMA Control & Status Reg. */ \
- /* channel 3 (read) */ \
- (*((volatile Word *) io_p2v (_RdDCSR3)))
-#define DBSA3 /* DMA Buffer Start address reg. A */ \
- /* channel 3 */ \
- (*((volatile Address *) io_p2v (_DBSA3)))
-#define DBTA3 /* DMA Buffer Transfer count */ \
- /* reg. A channel 3 */ \
- (*((volatile Word *) io_p2v (_DBTA3)))
-#define DBSB3 /* DMA Buffer Start address reg. B */ \
- /* channel 3 */ \
- (*((volatile Address *) io_p2v (_DBSB3)))
-#define DBTB3 /* DMA Buffer Transfer count */ \
- /* reg. B channel 3 */ \
- (*((volatile Word *) io_p2v (_DBTB3)))
-
-#define DDAR4 /* DMA Device Address Reg. */ \
- /* channel 4 */ \
- (*((volatile Word *) io_p2v (_DDAR4)))
-#define SetDCSR4 /* Set DMA Control & Status Reg. */ \
- /* channel 4 (write) */ \
- (*((volatile Word *) io_p2v (_SetDCSR4)))
-#define ClrDCSR4 /* Clear DMA Control & Status Reg. */ \
- /* channel 4 (write) */ \
- (*((volatile Word *) io_p2v (_ClrDCSR4)))
-#define RdDCSR4 /* Read DMA Control & Status Reg. */ \
- /* channel 4 (read) */ \
- (*((volatile Word *) io_p2v (_RdDCSR4)))
-#define DBSA4 /* DMA Buffer Start address reg. A */ \
- /* channel 4 */ \
- (*((volatile Address *) io_p2v (_DBSA4)))
-#define DBTA4 /* DMA Buffer Transfer count */ \
- /* reg. A channel 4 */ \
- (*((volatile Word *) io_p2v (_DBTA4)))
-#define DBSB4 /* DMA Buffer Start address reg. B */ \
- /* channel 4 */ \
- (*((volatile Address *) io_p2v (_DBSB4)))
-#define DBTB4 /* DMA Buffer Transfer count */ \
- /* reg. B channel 4 */ \
- (*((volatile Word *) io_p2v (_DBTB4)))
-
-#define DDAR5 /* DMA Device Address Reg. */ \
- /* channel 5 */ \
- (*((volatile Word *) io_p2v (_DDAR5)))
-#define SetDCSR5 /* Set DMA Control & Status Reg. */ \
- /* channel 5 (write) */ \
- (*((volatile Word *) io_p2v (_SetDCSR5)))
-#define ClrDCSR5 /* Clear DMA Control & Status Reg. */ \
- /* channel 5 (write) */ \
- (*((volatile Word *) io_p2v (_ClrDCSR5)))
-#define RdDCSR5 /* Read DMA Control & Status Reg. */ \
- /* channel 5 (read) */ \
- (*((volatile Word *) io_p2v (_RdDCSR5)))
-#define DBSA5 /* DMA Buffer Start address reg. A */ \
- /* channel 5 */ \
- (*((volatile Address *) io_p2v (_DBSA5)))
-#define DBTA5 /* DMA Buffer Transfer count */ \
- /* reg. A channel 5 */ \
- (*((volatile Word *) io_p2v (_DBTA5)))
-#define DBSB5 /* DMA Buffer Start address reg. B */ \
- /* channel 5 */ \
- (*((volatile Address *) io_p2v (_DBSB5)))
-#define DBTB5 /* DMA Buffer Transfer count */ \
- /* reg. B channel 5 */ \
- (*((volatile Word *) io_p2v (_DBTB5)))
-
-#endif /* LANGUAGE == C */
-
-#define DDAR_RW 0x00000001 /* device data Read/Write */
-#define DDAR_DevWr (DDAR_RW*0) /* Device data Write */
- /* (memory -> device) */
-#define DDAR_DevRd (DDAR_RW*1) /* Device data Read */
- /* (device -> memory) */
-#define DDAR_E 0x00000002 /* big/little Endian device */
-#define DDAR_LtlEnd (DDAR_E*0) /* Little Endian device */
-#define DDAR_BigEnd (DDAR_E*1) /* Big Endian device */
-#define DDAR_BS 0x00000004 /* device Burst Size */
-#define DDAR_Brst4 (DDAR_BS*0) /* Burst-of-4 device */
-#define DDAR_Brst8 (DDAR_BS*1) /* Burst-of-8 device */
-#define DDAR_DW 0x00000008 /* device Data Width */
-#define DDAR_8BitDev (DDAR_DW*0) /* 8-Bit Device */
-#define DDAR_16BitDev (DDAR_DW*1) /* 16-Bit Device */
-#define DDAR_DS Fld (4, 4) /* Device Select */
-#define DDAR_Ser0UDCTr /* Ser. port 0 UDC Transmit */ \
- (0x0 << FShft (DDAR_DS))
-#define DDAR_Ser0UDCRc /* Ser. port 0 UDC Receive */ \
- (0x1 << FShft (DDAR_DS))
-#define DDAR_Ser1SDLCTr /* Ser. port 1 SDLC Transmit */ \
- (0x2 << FShft (DDAR_DS))
-#define DDAR_Ser1SDLCRc /* Ser. port 1 SDLC Receive */ \
- (0x3 << FShft (DDAR_DS))
-#define DDAR_Ser1UARTTr /* Ser. port 1 UART Transmit */ \
- (0x4 << FShft (DDAR_DS))
-#define DDAR_Ser1UARTRc /* Ser. port 1 UART Receive */ \
- (0x5 << FShft (DDAR_DS))
-#define DDAR_Ser2ICPTr /* Ser. port 2 ICP Transmit */ \
- (0x6 << FShft (DDAR_DS))
-#define DDAR_Ser2ICPRc /* Ser. port 2 ICP Receive */ \
- (0x7 << FShft (DDAR_DS))
-#define DDAR_Ser3UARTTr /* Ser. port 3 UART Transmit */ \
- (0x8 << FShft (DDAR_DS))
-#define DDAR_Ser3UARTRc /* Ser. port 3 UART Receive */ \
- (0x9 << FShft (DDAR_DS))
-#define DDAR_Ser4MCP0Tr /* Ser. port 4 MCP 0 Transmit */ \
- /* (audio) */ \
- (0xA << FShft (DDAR_DS))
-#define DDAR_Ser4MCP0Rc /* Ser. port 4 MCP 0 Receive */ \
- /* (audio) */ \
- (0xB << FShft (DDAR_DS))
-#define DDAR_Ser4MCP1Tr /* Ser. port 4 MCP 1 Transmit */ \
- /* (telecom) */ \
- (0xC << FShft (DDAR_DS))
-#define DDAR_Ser4MCP1Rc /* Ser. port 4 MCP 1 Receive */ \
- /* (telecom) */ \
- (0xD << FShft (DDAR_DS))
-#define DDAR_Ser4SSPTr /* Ser. port 4 SSP Transmit */ \
- (0xE << FShft (DDAR_DS))
-#define DDAR_Ser4SSPRc /* Ser. port 4 SSP Receive */ \
- (0xF << FShft (DDAR_DS))
-#define DDAR_DA Fld (24, 8) /* Device Address */
-#define DDAR_DevAdd(Add) /* Device Address */ \
- (((Add) & 0xF0000000) | \
- (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2)))
-#define DDAR_Ser0UDCWr /* Ser. port 0 UDC Write */ \
- (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
- DDAR_Ser0UDCTr + DDAR_DevAdd (_Ser0UDCDR))
-#define DDAR_Ser0UDCRd /* Ser. port 0 UDC Read */ \
- (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
- DDAR_Ser0UDCRc + DDAR_DevAdd (_Ser0UDCDR))
-#define DDAR_Ser1UARTWr /* Ser. port 1 UART Write */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser1UARTTr + DDAR_DevAdd (_Ser1UTDR))
-#define DDAR_Ser1UARTRd /* Ser. port 1 UART Read */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser1UARTRc + DDAR_DevAdd (_Ser1UTDR))
-#define DDAR_Ser1SDLCWr /* Ser. port 1 SDLC Write */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser1SDLCTr + DDAR_DevAdd (_Ser1SDDR))
-#define DDAR_Ser1SDLCRd /* Ser. port 1 SDLC Read */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser1SDLCRc + DDAR_DevAdd (_Ser1SDDR))
-#define DDAR_Ser2UARTWr /* Ser. port 2 UART Write */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser2ICPTr + DDAR_DevAdd (_Ser2UTDR))
-#define DDAR_Ser2UARTRd /* Ser. port 2 UART Read */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser2ICPRc + DDAR_DevAdd (_Ser2UTDR))
-#define DDAR_Ser2HSSPWr /* Ser. port 2 HSSP Write */ \
- (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
- DDAR_Ser2ICPTr + DDAR_DevAdd (_Ser2HSDR))
-#define DDAR_Ser2HSSPRd /* Ser. port 2 HSSP Read */ \
- (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
- DDAR_Ser2ICPRc + DDAR_DevAdd (_Ser2HSDR))
-#define DDAR_Ser3UARTWr /* Ser. port 3 UART Write */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser3UARTTr + DDAR_DevAdd (_Ser3UTDR))
-#define DDAR_Ser3UARTRd /* Ser. port 3 UART Read */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
- DDAR_Ser3UARTRc + DDAR_DevAdd (_Ser3UTDR))
-#define DDAR_Ser4MCP0Wr /* Ser. port 4 MCP 0 Write (audio) */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
- DDAR_Ser4MCP0Tr + DDAR_DevAdd (_Ser4MCDR0))
-#define DDAR_Ser4MCP0Rd /* Ser. port 4 MCP 0 Read (audio) */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
- DDAR_Ser4MCP0Rc + DDAR_DevAdd (_Ser4MCDR0))
-#define DDAR_Ser4MCP1Wr /* Ser. port 4 MCP 1 Write */ \
- /* (telecom) */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
- DDAR_Ser4MCP1Tr + DDAR_DevAdd (_Ser4MCDR1))
-#define DDAR_Ser4MCP1Rd /* Ser. port 4 MCP 1 Read */ \
- /* (telecom) */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
- DDAR_Ser4MCP1Rc + DDAR_DevAdd (_Ser4MCDR1))
-#define DDAR_Ser4SSPWr /* Ser. port 4 SSP Write (16 bits) */ \
- (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
- DDAR_Ser4SSPTr + DDAR_DevAdd (_Ser4SSDR))
-#define DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ \
- (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
- DDAR_Ser4SSPRc + DDAR_DevAdd (_Ser4SSDR))
-
-#define DCSR_RUN 0x00000001 /* DMA RUNing */
-#define DCSR_IE 0x00000002 /* DMA Interrupt Enable */
-#define DCSR_ERROR 0x00000004 /* DMA ERROR */
-#define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */
-#define DCSR_STRTA 0x00000010 /* STaRTed DMA transfer buffer A */
-#define DCSR_DONEB 0x00000020 /* DONE DMA transfer buffer B */
-#define DCSR_STRTB 0x00000040 /* STaRTed DMA transfer buffer B */
-#define DCSR_BIU 0x00000080 /* DMA Buffer In Use */
-#define DCSR_BufA (DCSR_BIU*0) /* DMA Buffer A in use */
-#define DCSR_BufB (DCSR_BIU*1) /* DMA Buffer B in use */
-
-#define DBT_TC Fld (13, 0) /* Transfer Count */
-#define DBTA_TCA DBT_TC /* Transfer Count buffer A */
-#define DBTB_TCB DBT_TC /* Transfer Count buffer B */
-
-
-/*
- * Liquid Crystal Display (LCD) control registers
- *
- * Registers
- * LCCR0 Liquid Crystal Display (LCD) Control Register 0
- * (read/write).
- * [Bits LDM, BAM, and ERM are only implemented in
- * versions 2.0 (rev. = 8) and higher of the StrongARM
- * SA-1100.]
- * LCSR Liquid Crystal Display (LCD) Status Register
- * (read/write).
- * [Bit LDD can be only read in versions 1.0 (rev. = 1)
- * and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be
- * read and written (cleared) in versions 2.0 (rev. = 8)
- * and higher.]
- * DBAR1 Liquid Crystal Display (LCD) Direct Memory Access
- * (DMA) Base Address Register channel 1 (read/write).
- * DCAR1 Liquid Crystal Display (LCD) Direct Memory Access
- * (DMA) Current Address Register channel 1 (read).
- * DBAR2 Liquid Crystal Display (LCD) Direct Memory Access
- * (DMA) Base Address Register channel 2 (read/write).
- * DCAR2 Liquid Crystal Display (LCD) Direct Memory Access
- * (DMA) Current Address Register channel 2 (read).
- * LCCR1 Liquid Crystal Display (LCD) Control Register 1
- * (read/write).
- * [The LCCR1 register can be only written in
- * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- * StrongARM SA-1100, it can be written and read in
- * versions 2.0 (rev. = 8) and higher.]
- * LCCR2 Liquid Crystal Display (LCD) Control Register 2
- * (read/write).
- * [The LCCR1 register can be only written in
- * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- * StrongARM SA-1100, it can be written and read in
- * versions 2.0 (rev. = 8) and higher.]
- * LCCR3 Liquid Crystal Display (LCD) Control Register 3
- * (read/write).
- * [The LCCR1 register can be only written in
- * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- * StrongARM SA-1100, it can be written and read in
- * versions 2.0 (rev. = 8) and higher. Bit PCP is only
- * implemented in versions 2.0 (rev. = 8) and higher of
- * the StrongARM SA-1100.]
- *
- * Clocks
- * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
- * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
- * fpix, Tpix Frequency, period of the pixel clock.
- * fln, Tln Frequency, period of the line clock.
- * fac, Tac Frequency, period of the AC bias clock.
- */
-
-#define LCD_PEntrySp 2 /* LCD Palette Entry Space [byte] */
-#define LCD_4BitPSp /* LCD 4-Bit pixel Palette Space */ \
- /* [byte] */ \
- (16*LCD_PEntrySp)
-#define LCD_8BitPSp /* LCD 8-Bit pixel Palette Space */ \
- /* [byte] */ \
- (256*LCD_PEntrySp)
-#define LCD_12_16BitPSp /* LCD 12/16-Bit pixel */ \
- /* dummy-Palette Space [byte] */ \
- (16*LCD_PEntrySp)
-
-#define LCD_PGrey Fld (4, 0) /* LCD Palette entry Grey value */
-#define LCD_PBlue Fld (4, 0) /* LCD Palette entry Blue value */
-#define LCD_PGreen Fld (4, 4) /* LCD Palette entry Green value */
-#define LCD_PRed Fld (4, 8) /* LCD Palette entry Red value */
-#define LCD_PBS Fld (2, 12) /* LCD Pixel Bit Size */
-#define LCD_4Bit /* LCD 4-Bit pixel mode */ \
- (0 << FShft (LCD_PBS))
-#define LCD_8Bit /* LCD 8-Bit pixel mode */ \
- (1 << FShft (LCD_PBS))
-#define LCD_12_16Bit /* LCD 12/16-Bit pixel mode */ \
- (2 << FShft (LCD_PBS))
-
-#define LCD_Int0_0 0x0 /* LCD Intensity = 0.0% = 0 */
-#define LCD_Int11_1 0x1 /* LCD Intensity = 11.1% = 1/9 */
-#define LCD_Int20_0 0x2 /* LCD Intensity = 20.0% = 1/5 */
-#define LCD_Int26_7 0x3 /* LCD Intensity = 26.7% = 4/15 */
-#define LCD_Int33_3 0x4 /* LCD Intensity = 33.3% = 3/9 */
-#define LCD_Int40_0 0x5 /* LCD Intensity = 40.0% = 2/5 */
-#define LCD_Int44_4 0x6 /* LCD Intensity = 44.4% = 4/9 */
-#define LCD_Int50_0 0x7 /* LCD Intensity = 50.0% = 1/2 */
-#define LCD_Int55_6 0x8 /* LCD Intensity = 55.6% = 5/9 */
-#define LCD_Int60_0 0x9 /* LCD Intensity = 60.0% = 3/5 */
-#define LCD_Int66_7 0xA /* LCD Intensity = 66.7% = 6/9 */
-#define LCD_Int73_3 0xB /* LCD Intensity = 73.3% = 11/15 */
-#define LCD_Int80_0 0xC /* LCD Intensity = 80.0% = 4/5 */
-#define LCD_Int88_9 0xD /* LCD Intensity = 88.9% = 8/9 */
-#define LCD_Int100_0 0xE /* LCD Intensity = 100.0% = 1 */
-#define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */
- /* (Alternative) */
-
-#define _LCCR0 0xB0100000 /* LCD Control Reg. 0 */
-#define _LCSR 0xB0100004 /* LCD Status Reg. */
-#define _DBAR1 0xB0100010 /* LCD DMA Base Address Reg. */
- /* channel 1 */
-#define _DCAR1 0xB0100014 /* LCD DMA Current Address Reg. */
- /* channel 1 */
-#define _DBAR2 0xB0100018 /* LCD DMA Base Address Reg. */
- /* channel 2 */
-#define _DCAR2 0xB010001C /* LCD DMA Current Address Reg. */
- /* channel 2 */
-#define _LCCR1 0xB0100020 /* LCD Control Reg. 1 */
-#define _LCCR2 0xB0100024 /* LCD Control Reg. 2 */
-#define _LCCR3 0xB0100028 /* LCD Control Reg. 3 */
-
-#if LANGUAGE == C
-#define LCCR0 /* LCD Control Reg. 0 */ \
- (*((volatile Word *) io_p2v (_LCCR0)))
-#define LCSR /* LCD Status Reg. */ \
- (*((volatile Word *) io_p2v (_LCSR)))
-#define DBAR1 /* LCD DMA Base Address Reg. */ \
- /* channel 1 */ \
- (*((volatile Address *) io_p2v (_DBAR1)))
-#define DCAR1 /* LCD DMA Current Address Reg. */ \
- /* channel 1 */ \
- (*((volatile Address *) io_p2v (_DCAR1)))
-#define DBAR2 /* LCD DMA Base Address Reg. */ \
- /* channel 2 */ \
- (*((volatile Address *) io_p2v (_DBAR2)))
-#define DCAR2 /* LCD DMA Current Address Reg. */ \
- /* channel 2 */ \
- (*((volatile Address *) io_p2v (_DCAR2)))
-#define LCCR1 /* LCD Control Reg. 1 */ \
- (*((volatile Word *) io_p2v (_LCCR1)))
-#define LCCR2 /* LCD Control Reg. 2 */ \
- (*((volatile Word *) io_p2v (_LCCR2)))
-#define LCCR3 /* LCD Control Reg. 3 */ \
- (*((volatile Word *) io_p2v (_LCCR3)))
-#endif /* LANGUAGE == C */
-
-#define LCCR0_LEN 0x00000001 /* LCD ENable */
-#define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */
-#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
-#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
-#define LCCR0_SDS 0x00000004 /* Single/Dual panel display */
- /* Select */
-#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
-#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
-#define LCCR0_LDM 0x00000008 /* LCD Disable done (LDD) */
- /* interrupt Mask (disable) */
-#define LCCR0_BAM 0x00000010 /* Base Address update (BAU) */
- /* interrupt Mask (disable) */
-#define LCCR0_ERM 0x00000020 /* LCD ERror (BER, IOL, IUL, IOU, */
- /* IUU, OOL, OUL, OOU, and OUU) */
- /* interrupt Mask (disable) */
-#define LCCR0_PAS 0x00000080 /* Passive/Active display Select */
-#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
-#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
-#define LCCR0_BLE 0x00000100 /* Big/Little Endian select */
-#define LCCR0_LtlEnd (LCCR0_BLE*0) /* Little Endian frame buffer */
-#define LCCR0_BigEnd (LCCR0_BLE*1) /* Big Endian frame buffer */
-#define LCCR0_DPD 0x00000200 /* Double Pixel Data (monochrome */
- /* display mode) */
-#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */
- /* display */
-#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */
- /* display */
-#define LCCR0_PDD Fld (8, 12) /* Palette DMA request Delay */
- /* [Tmem] */
-#define LCCR0_DMADel(Tcpu) /* palette DMA request Delay */ \
- /* [0..510 Tcpu] */ \
- ((Tcpu)/2 << FShft (LCCR0_PDD))
-
-#define LCSR_LDD 0x00000001 /* LCD Disable Done */
-#define LCSR_BAU 0x00000002 /* Base Address Update (read) */
-#define LCSR_BER 0x00000004 /* Bus ERror */
-#define LCSR_ABC 0x00000008 /* AC Bias clock Count */
-#define LCSR_IOL 0x00000010 /* Input FIFO Over-run Lower */
- /* panel */
-#define LCSR_IUL 0x00000020 /* Input FIFO Under-run Lower */
- /* panel */
-#define LCSR_IOU 0x00000040 /* Input FIFO Over-run Upper */
- /* panel */
-#define LCSR_IUU 0x00000080 /* Input FIFO Under-run Upper */
- /* panel */
-#define LCSR_OOL 0x00000100 /* Output FIFO Over-run Lower */
- /* panel */
-#define LCSR_OUL 0x00000200 /* Output FIFO Under-run Lower */
- /* panel */
-#define LCSR_OOU 0x00000400 /* Output FIFO Over-run Upper */
- /* panel */
-#define LCSR_OUU 0x00000800 /* Output FIFO Under-run Upper */
- /* panel */
-
-#define LCCR1_PPL Fld (6, 4) /* Pixels Per Line/16 - 1 */
-#define LCCR1_DisWdth(Pixel) /* Display Width [16..1024 pix.] */ \
- (((Pixel) - 16)/16 << FShft (LCCR1_PPL))
-#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
- /* pulse Width - 2 [Tpix] (L_LCLK) */
-#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \
- /* pulse Width [2..65 Tpix] */ \
- (((Tpix) - 2) << FShft (LCCR1_HSW))
-#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */
- /* count - 1 [Tpix] */
-#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \
- /* [1..256 Tpix] */ \
- (((Tpix) - 1) << FShft (LCCR1_ELW))
-#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
- /* Wait count - 1 [Tpix] */
-#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \
- /* [1..256 Tpix] */ \
- (((Tpix) - 1) << FShft (LCCR1_BLW))
-
-#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
-#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \
- (((Line) - 1) << FShft (LCCR2_LPP))
-#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */
- /* Width - 1 [Tln] (L_FCLK) */
-#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \
- /* Width [1..64 Tln] */ \
- (((Tln) - 1) << FShft (LCCR2_VSW))
-#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
- /* count [Tln] */
-#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \
- /* [0..255 Tln] */ \
- ((Tln) << FShft (LCCR2_EFW))
-#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
- /* Wait count [Tln] */
-#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \
- /* [0..255 Tln] */ \
- ((Tln) << FShft (LCCR2_BFW))
-
-#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor/2 - 2 */
- /* [1..255] (L_PCLK) */
- /* fpix = fcpu/(2*(PCD + 2)) */
- /* Tpix = 2*(PCD + 2)*Tcpu */
-#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor [6..514] */ \
- (((Div) - 4)/2 << FShft (LCCR3_PCD))
- /* fpix = fcpu/(2*Floor (Div/2)) */
- /* Tpix = 2*Floor (Div/2)*Tcpu */
-#define LCCR3_CeilPixClkDiv(Div) /* Ceil. of PixClkDiv [6..514] */ \
- (((Div) - 3)/2 << FShft (LCCR3_PCD))
- /* fpix = fcpu/(2*Ceil (Div/2)) */
- /* Tpix = 2*Ceil (Div/2)*Tcpu */
-#define LCCR3_ACB Fld (8, 8) /* AC Bias clock half period - 1 */
- /* [Tln] (L_BIAS) */
-#define LCCR3_ACBsDiv(Div) /* AC Bias clock Divisor [2..512] */ \
- (((Div) - 2)/2 << FShft (LCCR3_ACB))
- /* fac = fln/(2*Floor (Div/2)) */
- /* Tac = 2*Floor (Div/2)*Tln */
-#define LCCR3_CeilACBsDiv(Div) /* Ceil. of ACBsDiv [2..512] */ \
- (((Div) - 1)/2 << FShft (LCCR3_ACB))
- /* fac = fln/(2*Ceil (Div/2)) */
- /* Tac = 2*Ceil (Div/2)*Tln */
-#define LCCR3_API Fld (4, 16) /* AC bias Pin transitions per */
- /* Interrupt */
-#define LCCR3_ACBsCntOff /* AC Bias clock transition Count */ \
- /* Off */ \
- (0 << FShft (LCCR3_API))
-#define LCCR3_ACBsCnt(Trans) /* AC Bias clock transition Count */ \
- /* [1..15] */ \
- ((Trans) << FShft (LCCR3_API))
-#define LCCR3_VSP 0x00100000 /* Vertical Synchronization pulse */
- /* Polarity (L_FCLK) */
-#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */
- /* active High */
-#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */
- /* active Low */
-#define LCCR3_HSP 0x00200000 /* Horizontal Synchronization */
- /* pulse Polarity (L_LCLK) */
-#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */
- /* pulse active High */
-#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */
- /* pulse active Low */
-#define LCCR3_PCP 0x00400000 /* Pixel Clock Polarity (L_PCLK) */
-#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
-#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
-#define LCCR3_OEP 0x00800000 /* Output Enable Polarity (L_BIAS, */
- /* active display mode) */
-#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
-#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
-
-
-#undef C
-#undef Assembly
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 5/6] i2c: Remove non-DM_I2C support from davinci_i2c.c
2022-06-27 17:35 [PATCH 1/6] Convert CONFIG_SYS_CACHE_STASHING to Kconfig Tom Rini
` (2 preceding siblings ...)
2022-06-27 17:35 ` [PATCH 4/6] legoev3: Migrate to DM_I2C Tom Rini
@ 2022-06-27 17:35 ` Tom Rini
2022-06-27 17:35 ` [PATCH 6/6] powerpc: Use the poison value of 0xdeadbeef directly in DDR init Tom Rini
2022-07-09 15:08 ` [PATCH 1/6] Convert CONFIG_SYS_CACHE_STASHING to Kconfig Tom Rini
5 siblings, 0 replies; 8+ messages in thread
From: Tom Rini @ 2022-06-27 17:35 UTC (permalink / raw)
To: u-boot
As the migration deadline has passed, and all platforms have been
migrated, remove the non-DM code here.
Signed-off-by: Tom Rini <trini@konsulko.com>
---
arch/arm/mach-keystone/ddr3_spd.c | 13 ----
drivers/i2c/Kconfig | 4 +-
drivers/i2c/davinci_i2c.c | 97 ----------------------------
include/configs/legoev3.h | 6 --
include/configs/omapl138_lcdk.h | 2 -
include/configs/ti_armv7_keystone2.h | 8 ---
6 files changed, 2 insertions(+), 128 deletions(-)
diff --git a/arch/arm/mach-keystone/ddr3_spd.c b/arch/arm/mach-keystone/ddr3_spd.c
index c4a1908af8d0..6f7f8ab7b40c 100644
--- a/arch/arm/mach-keystone/ddr3_spd.c
+++ b/arch/arm/mach-keystone/ddr3_spd.c
@@ -404,24 +404,11 @@ static void init_ddr3param(struct ddr3_spd_cb *spd_cb,
static int ddr3_read_spd(ddr3_spd_eeprom_t *spd_params)
{
int ret;
-#if !CONFIG_IS_ENABLED(DM_I2C)
- int old_bus;
-
- i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE);
-
- old_bus = i2c_get_bus_num();
- i2c_set_bus_num(1);
-
- ret = i2c_read(0x53, 0, 1, (unsigned char *)spd_params, 256);
-
- i2c_set_bus_num(old_bus);
-#else
struct udevice *dev;
ret = i2c_get_chip_for_busnum(1, 0x53, 1, &dev);
if (!ret)
ret = dm_i2c_read(dev, 0, (unsigned char *)spd_params, 256);
-#endif
if (ret) {
printf("Cannot read DIMM params\n");
return 1;
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index d25c5736ef08..72d06e4972b5 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -687,9 +687,9 @@ config SYS_I2C_SPEED
config SYS_I2C_BUS_MAX
int "Max I2C busses"
- depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_SOCFPGA
+ depends on ARCH_OMAP2PLUS || ARCH_SOCFPGA
default 2 if TI816X
- default 3 if OMAP34XX || AM33XX || AM43XX || ARCH_KEYSTONE
+ default 3 if OMAP34XX || AM33XX || AM43XX
default 4 if ARCH_SOCFPGA || OMAP44XX || TI814X
default 5 if OMAP54XX
help
diff --git a/drivers/i2c/davinci_i2c.c b/drivers/i2c/davinci_i2c.c
index a4abd25c3987..ae177227dea3 100644
--- a/drivers/i2c/davinci_i2c.c
+++ b/drivers/i2c/davinci_i2c.c
@@ -21,14 +21,12 @@
#include <linux/delay.h>
#include "davinci_i2c.h"
-#if CONFIG_IS_ENABLED(DM_I2C)
/* Information about i2c controller */
struct i2c_bus {
int id;
uint speed;
struct i2c_regs *regs;
};
-#endif
#define CHECK_NACK() \
do {\
@@ -340,99 +338,6 @@ static int _davinci_i2c_probe_chip(struct i2c_regs *i2c_base, uint8_t chip)
return rc;
}
-#if !CONFIG_IS_ENABLED(DM_I2C)
-static struct i2c_regs *davinci_get_base(struct i2c_adapter *adap)
-{
- switch (adap->hwadapnr) {
-#if CONFIG_SYS_I2C_BUS_MAX >= 3
- case 2:
- return (struct i2c_regs *)I2C2_BASE;
-#endif
-#if CONFIG_SYS_I2C_BUS_MAX >= 2
- case 1:
- return (struct i2c_regs *)I2C1_BASE;
-#endif
- case 0:
- return (struct i2c_regs *)I2C_BASE;
-
- default:
- printf("wrong hwadapnr: %d\n", adap->hwadapnr);
- }
-
- return NULL;
-}
-
-static uint davinci_i2c_setspeed(struct i2c_adapter *adap, uint speed)
-{
- struct i2c_regs *i2c_base = davinci_get_base(adap);
- uint ret;
-
- adap->speed = speed;
- ret = _davinci_i2c_setspeed(i2c_base, speed);
-
- return ret;
-}
-
-static void davinci_i2c_init(struct i2c_adapter *adap, int speed,
- int slaveadd)
-{
- struct i2c_regs *i2c_base = davinci_get_base(adap);
-
- adap->speed = speed;
- _davinci_i2c_init(i2c_base, speed, slaveadd);
-
- return;
-}
-
-static int davinci_i2c_read(struct i2c_adapter *adap, uint8_t chip,
- uint32_t addr, int alen, uint8_t *buf, int len)
-{
- struct i2c_regs *i2c_base = davinci_get_base(adap);
- return _davinci_i2c_read(i2c_base, chip, addr, alen, buf, len);
-}
-
-static int davinci_i2c_write(struct i2c_adapter *adap, uint8_t chip,
- uint32_t addr, int alen, uint8_t *buf, int len)
-{
- struct i2c_regs *i2c_base = davinci_get_base(adap);
-
- return _davinci_i2c_write(i2c_base, chip, addr, alen, buf, len);
-}
-
-static int davinci_i2c_probe_chip(struct i2c_adapter *adap, uint8_t chip)
-{
- struct i2c_regs *i2c_base = davinci_get_base(adap);
-
- return _davinci_i2c_probe_chip(i2c_base, chip);
-}
-
-U_BOOT_I2C_ADAP_COMPLETE(davinci_0, davinci_i2c_init, davinci_i2c_probe_chip,
- davinci_i2c_read, davinci_i2c_write,
- davinci_i2c_setspeed,
- CONFIG_SYS_DAVINCI_I2C_SPEED,
- CONFIG_SYS_DAVINCI_I2C_SLAVE,
- 0)
-
-#if CONFIG_SYS_I2C_BUS_MAX >= 2
-U_BOOT_I2C_ADAP_COMPLETE(davinci_1, davinci_i2c_init, davinci_i2c_probe_chip,
- davinci_i2c_read, davinci_i2c_write,
- davinci_i2c_setspeed,
- CONFIG_SYS_DAVINCI_I2C_SPEED1,
- CONFIG_SYS_DAVINCI_I2C_SLAVE1,
- 1)
-#endif
-
-#if CONFIG_SYS_I2C_BUS_MAX >= 3
-U_BOOT_I2C_ADAP_COMPLETE(davinci_2, davinci_i2c_init, davinci_i2c_probe_chip,
- davinci_i2c_read, davinci_i2c_write,
- davinci_i2c_setspeed,
- CONFIG_SYS_DAVINCI_I2C_SPEED2,
- CONFIG_SYS_DAVINCI_I2C_SLAVE2,
- 2)
-#endif
-
-#else /* CONFIG_DM_I2C */
-
static int davinci_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
int nmsgs)
{
@@ -507,5 +412,3 @@ U_BOOT_DRIVER(i2c_davinci) = {
.priv_auto = sizeof(struct i2c_bus),
.ops = &davinci_i2c_ops,
};
-
-#endif /* CONFIG_DM_I2C */
diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h
index 418b08e73356..f0ae9248af34 100644
--- a/include/configs/legoev3.h
+++ b/include/configs/legoev3.h
@@ -41,12 +41,6 @@
#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID)
-/*
- * I2C Configuration
- */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
-
/*
* U-Boot general configuration
*/
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index c9f5004117f2..c644768ae7d7 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -99,8 +99,6 @@
/*
* I2C Configuration
*/
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 25000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20
/*
diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index bf76afaededc..29a6038f8985 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -59,14 +59,6 @@
#define CONFIG_KSNET_SERDES_SGMII2_BASE KS2_SGMII_SERDES2_BASE
#define CONFIG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES
-/* I2C Configuration */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */
-
/* EEPROM definitions */
/* NAND Configuration */
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread