All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alain Volmat <alain.volmat@foss.st.com>
To: <alexandre.torgue@foss.st.com>
Cc: <robh+dt@kernel.org>, <mcoquelin.stm32@gmail.com>,
	<krzysztof.kozlowski+dt@linaro.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<amelie.delaunay@foss.st.com>
Subject: [PATCH 2/2] ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts
Date: Thu, 21 Jul 2022 17:29:33 +0200	[thread overview]
Message-ID: <20220721152933.3805272-3-alain.volmat@foss.st.com> (raw)
In-Reply-To: <20220721152933.3805272-1-alain.volmat@foss.st.com>

Enable the two i2c busses i2c1 and i2c5 available on the
stm32mp135f-dk Discovery board.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
 arch/arm/boot/dts/stm32mp13-pinctrl.dtsi | 34 ++++++++++++++++++++++++
 arch/arm/boot/dts/stm32mp135f-dk.dts     | 26 ++++++++++++++++++
 2 files changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
index d2472cd8f1d0..749078ba9d42 100644
--- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
@@ -6,6 +6,40 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('E', 8, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_sleep_pins_a: i2c1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('E', 8, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	i2c5_pins_a: i2c5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('H', 6, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c5_sleep_pins_a: i2c5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('H', 6, ANALOG)>; /* I2C5_SDA */
+		};
+	};
+
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
 		pins {
 			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index e6b8ffd332c7..3e2823332d51 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -68,6 +68,32 @@ vdd_sd: vdd-sd {
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <96>;
+	i2c-scl-falling-time-ns = <3>;
+	clock-frequency = <1000000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <170>;
+	i2c-scl-falling-time-ns = <5>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
 &iwdg2 {
 	timeout-sec = <32>;
 	status = "okay";
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Alain Volmat <alain.volmat@foss.st.com>
To: <alexandre.torgue@foss.st.com>
Cc: <robh+dt@kernel.org>, <mcoquelin.stm32@gmail.com>,
	<krzysztof.kozlowski+dt@linaro.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<amelie.delaunay@foss.st.com>
Subject: [PATCH 2/2] ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts
Date: Thu, 21 Jul 2022 17:29:33 +0200	[thread overview]
Message-ID: <20220721152933.3805272-3-alain.volmat@foss.st.com> (raw)
In-Reply-To: <20220721152933.3805272-1-alain.volmat@foss.st.com>

Enable the two i2c busses i2c1 and i2c5 available on the
stm32mp135f-dk Discovery board.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
 arch/arm/boot/dts/stm32mp13-pinctrl.dtsi | 34 ++++++++++++++++++++++++
 arch/arm/boot/dts/stm32mp135f-dk.dts     | 26 ++++++++++++++++++
 2 files changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
index d2472cd8f1d0..749078ba9d42 100644
--- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
@@ -6,6 +6,40 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('E', 8, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_sleep_pins_a: i2c1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('E', 8, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	i2c5_pins_a: i2c5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('H', 6, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c5_sleep_pins_a: i2c5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('H', 6, ANALOG)>; /* I2C5_SDA */
+		};
+	};
+
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
 		pins {
 			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index e6b8ffd332c7..3e2823332d51 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -68,6 +68,32 @@ vdd_sd: vdd-sd {
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <96>;
+	i2c-scl-falling-time-ns = <3>;
+	clock-frequency = <1000000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <170>;
+	i2c-scl-falling-time-ns = <5>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
 &iwdg2 {
 	timeout-sec = <32>;
 	status = "okay";
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-07-21 15:30 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-21 15:29 [PATCH 0/2] ARM: dts: stm32: add i2c in STM32MP13 Alain Volmat
2022-07-21 15:29 ` Alain Volmat
2022-07-21 15:29 ` [PATCH 1/2] ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi Alain Volmat
2022-07-21 15:29   ` Alain Volmat
2022-07-21 15:29 ` Alain Volmat [this message]
2022-07-21 15:29   ` [PATCH 2/2] ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts Alain Volmat
2022-08-26  7:52 ` [PATCH 0/2] ARM: dts: stm32: add i2c in STM32MP13 Alexandre TORGUE
2022-08-26  7:52   ` Alexandre TORGUE

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220721152933.3805272-3-alain.volmat@foss.st.com \
    --to=alain.volmat@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=amelie.delaunay@foss.st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.