All of lore.kernel.org
 help / color / mirror / Atom feed
From: ChiaEn Wu <peterwu.pub@gmail.com>
To: lee.jones@linaro.org, daniel.thompson@linaro.org,
	jingoohan1@gmail.com, pavel@ucw.cz, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, matthias.bgg@gmail.com,
	sre@kernel.org, chunfeng.yun@mediatek.com,
	gregkh@linuxfoundation.org, jic23@kernel.org, lars@metafoo.de,
	lgirdwood@gmail.com, broonie@kernel.org, linux@roeck-us.net,
	heikki.krogerus@linux.intel.com, deller@gmx.de,
	andy.shevchenko@gmail.com
Cc: chiaen_wu@richtek.com, alice_chen@richtek.com,
	cy_huang@richtek.com, dri-devel@lists.freedesktop.org,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-iio@vger.kernel.org, linux-fbdev@vger.kernel.org,
	szunichen@gmail.com
Subject: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
Date: Fri, 22 Jul 2022 18:24:06 +0800	[thread overview]
Message-ID: <20220722102407.2205-13-peterwu.pub@gmail.com> (raw)
In-Reply-To: <20220722102407.2205-1-peterwu.pub@gmail.com>

From: Alice Chen <alice_chen@richtek.com>

The MediaTek MT6370 is a highly-integrated smart power management IC,
which includes a single cell Li-Ion/Li-Polymer switching battery
charger, a USB Type-C & Power Delivery (PD) controller, dual Flash
LED current sources, a RGB LED driver, a backlight WLED driver,
a display bias driver and a general LDO for portable devices.

The Flash LED in MT6370 has 2 channels and support torch/strobe mode.
Add the support of MT6370 FLASH LED.

Signed-off-by: Alice Chen <alice_chen@richtek.com>
---

v6
- Use 'GENMASK' instead of 'BIT'.
- Use dev_err_probe to decrease LOC.
- Use 'dev' variable to make probe function more clean.
- Refine the return of _mt6370_flash_brightness_set function.
- Refine the descriptions.
- Use mt6370_clamp() instead of clamp_align().
- Use device resource managed API for v4l2 flash_release.
---
 drivers/leds/flash/Kconfig             |  12 +
 drivers/leds/flash/Makefile            |   1 +
 drivers/leds/flash/leds-mt6370-flash.c | 633 +++++++++++++++++++++++++++++++++
 3 files changed, 646 insertions(+)
 create mode 100644 drivers/leds/flash/leds-mt6370-flash.c

diff --git a/drivers/leds/flash/Kconfig b/drivers/leds/flash/Kconfig
index d3eb689..d5761ed 100644
--- a/drivers/leds/flash/Kconfig
+++ b/drivers/leds/flash/Kconfig
@@ -90,4 +90,16 @@ config LEDS_SGM3140
 	  This option enables support for the SGM3140 500mA Buck/Boost Charge
 	  Pump LED Driver.
 
+config LEDS_MT6370_FLASHLIGHT
+	tristate "Flash LED Support for MediaTek MT6370 PMIC"
+	depends on LEDS_CLASS
+	depends on MFD_MT6370
+	help
+	  Support 2 channels and torch/strobe mode.
+	  Say Y here to enable support for
+	  MT6370_FLASH_LED device.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "leds-mt6370-flash".
+
 endif # LEDS_CLASS_FLASH
diff --git a/drivers/leds/flash/Makefile b/drivers/leds/flash/Makefile
index 0acbddc..4c4c171 100644
--- a/drivers/leds/flash/Makefile
+++ b/drivers/leds/flash/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_LEDS_MAX77693)	+= leds-max77693.o
 obj-$(CONFIG_LEDS_RT4505)	+= leds-rt4505.o
 obj-$(CONFIG_LEDS_RT8515)	+= leds-rt8515.o
 obj-$(CONFIG_LEDS_SGM3140)	+= leds-sgm3140.o
+obj-$(CONFIG_LEDS_MT6370_FLASHLIGHT)	+= leds-mt6370-flash.o
diff --git a/drivers/leds/flash/leds-mt6370-flash.c b/drivers/leds/flash/leds-mt6370-flash.c
new file mode 100644
index 0000000..fe439ee
--- /dev/null
+++ b/drivers/leds/flash/leds-mt6370-flash.c
@@ -0,0 +1,633 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Richtek Technology Corp.
+ *
+ * Author: Alice Chen <alice_chen@richtek.com
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include <media/v4l2-flash-led-class.h>
+
+enum {
+	MT6370_LED_FLASH1,
+	MT6370_LED_FLASH2,
+	MT6370_MAX_LEDS
+};
+
+/* Virtual definition for multicolor */
+
+#define MT6370_REG_FLEDEN		0x17E
+#define MT6370_REG_STRBTO		0x173
+#define MT6370_REG_CHGSTAT2		0x1D1
+#define MT6370_REG_FLEDSTAT1		0x1D9
+#define	MT6370_REG_FLEDISTRB(_id)	(0x174 + 4 * _id)
+#define MT6370_REG_FLEDITOR(_id)	(0x175 + 4 * _id)
+#define MT6370_ITORCH_MASK		GENMASK(4, 0)
+#define MT6370_ISTROBE_MASK		GENMASK(6, 0)
+#define MT6370_STRBTO_MASK		GENMASK(6, 0)
+#define MT6370_TORCHEN_MASK		BIT(3)
+#define MT6370_STROBEN_MASK		BIT(2)
+#define MT6370_FLCSEN_MASK(_id)		BIT(MT6370_LED_FLASH2 - _id)
+#define MT6370_FLCSEN_MASK_ALL		GENMASK(1, 0)
+#define MT6370_FLEDCHGVINOVP_MASK	BIT(3)
+#define MT6370_FLED1STRBTO_MASK		BIT(11)
+#define MT6370_FLED2STRBTO_MASK		BIT(10)
+#define MT6370_FLED1STRB_MASK		BIT(9)
+#define MT6370_FLED2STRB_MASK		BIT(8)
+#define MT6370_FLED1SHORT_MASK		BIT(7)
+#define MT6370_FLED2SHORT_MASK		BIT(6)
+#define MT6370_FLEDLVF_MASK		BIT(3)
+
+#define MT6370_LED_JOINT		2
+#define MT6370_RANGE_FLED_REG		4
+#define MT6370_ITORCH_MIN_UA		25000
+#define MT6370_ITORCH_STEP_UA		12500
+#define MT6370_ITORCH_MAX_UA		400000
+#define MT6370_ITORCH_DOUBLE_MAX_UA	800000
+#define MT6370_ISTRB_MIN_UA		50000
+#define MT6370_ISTRB_STEP_UA		12500
+#define MT6370_ISTRB_MAX_UA		1500000
+#define MT6370_ISTRB_DOUBLE_MAX_UA	3000000
+#define MT6370_STRBTO_MIN_US		64000
+#define MT6370_STRBTO_STEP_US		32000
+#define MT6370_STRBTO_MAX_US		2432000
+
+#define STATE_OFF			0
+#define STATE_KEEP			1
+#define STATE_ON			2
+
+#define to_mt6370_led(ptr, member) container_of(ptr, struct mt6370_led, member)
+
+struct mt6370_led {
+	struct led_classdev_flash flash;
+	struct v4l2_flash *v4l2_flash;
+	struct mt6370_priv *priv;
+	u32 led_no;
+	u32 default_state;
+};
+
+struct mt6370_priv {
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex lock;
+	unsigned int fled_strobe_used;
+	unsigned int fled_torch_used;
+	unsigned int leds_active;
+	unsigned int leds_count;
+	struct mt6370_led leds[];
+};
+
+static int mt6370_torch_brightness_set(struct led_classdev *lcdev,
+				       enum led_brightness level)
+{
+	struct mt6370_led *led = to_mt6370_led(lcdev, flash.led_cdev);
+	struct mt6370_priv *priv = led->priv;
+	u32 led_enable_mask = (led->led_no == MT6370_LED_JOINT) ?
+			      MT6370_FLCSEN_MASK_ALL :
+			      MT6370_FLCSEN_MASK(led->led_no);
+	u32 enable_mask = MT6370_TORCHEN_MASK | led_enable_mask;
+	u32 val = level ? led_enable_mask : 0;
+	u32 prev = priv->fled_torch_used, curr;
+	int ret, i;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * Only one set of flash control logic,
+	 * use the flag to avoid strobe is currently used.
+	 */
+	if (priv->fled_strobe_used) {
+		dev_warn(lcdev->dev, "Please disable strobe first [%d]\n",
+			 priv->fled_strobe_used);
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	if (level)
+		curr = prev | BIT(led->led_no);
+	else
+		curr = prev & ~BIT(led->led_no);
+
+	if (curr)
+		val |= MT6370_TORCHEN_MASK;
+
+	if (level) {
+		level -= 1;
+		if (led->led_no == MT6370_LED_JOINT) {
+			int flevel[MT6370_MAX_LEDS];
+
+			flevel[0] = level / 2;
+			flevel[1] = level - flevel[0];
+			for (i = 0; i < MT6370_MAX_LEDS; i++) {
+				ret = regmap_update_bits(priv->regmap,
+						MT6370_REG_FLEDITOR(i),
+						MT6370_ITORCH_MASK, flevel[i]);
+				if (ret)
+					goto unlock;
+			}
+		} else {
+			ret = regmap_update_bits(priv->regmap,
+					MT6370_REG_FLEDITOR(led->led_no),
+					MT6370_ITORCH_MASK, level);
+			if (ret)
+				goto unlock;
+		}
+	}
+
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN,
+				 enable_mask, val);
+	if (ret)
+		goto unlock;
+
+	priv->fled_torch_used = curr;
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int mt6370_flash_brightness_set(struct led_classdev_flash *fl_cdev,
+				       u32 brightness)
+{
+	/*
+	 * Due to the current spike when turning on flash,
+	 * let brightness be kept by the framework.
+	 * This empty function is used to
+	 * prevent led_classdev_flash register ops check failure.
+	 */
+	return 0;
+}
+
+static int _mt6370_flash_brightness_set(struct led_classdev_flash *fl_cdev,
+					u32 brightness)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	struct led_flash_setting *s = &fl_cdev->brightness;
+	u32 val = (brightness - s->min) / s->step;
+	int ret, i;
+
+	if (led->led_no == MT6370_LED_JOINT) {
+		int flevel[MT6370_MAX_LEDS];
+
+		flevel[0] = val / 2;
+		flevel[1] = val - flevel[0];
+		for (i = 0; i < MT6370_MAX_LEDS; i++) {
+			ret = regmap_update_bits(priv->regmap,
+						 MT6370_REG_FLEDISTRB(i),
+						 MT6370_ISTROBE_MASK, flevel[i]);
+			if (ret)
+				return ret;
+		}
+	} else {
+		return regmap_update_bits(priv->regmap,
+					  MT6370_REG_FLEDISTRB(led->led_no),
+					  MT6370_ISTROBE_MASK, val);
+	}
+
+	return 0;
+}
+
+static int mt6370_strobe_set(struct led_classdev_flash *fl_cdev, bool state)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	struct led_classdev *lcdev = &fl_cdev->led_cdev;
+	struct led_flash_setting *s = &fl_cdev->brightness;
+	u32 led_enable_mask = (led->led_no == MT6370_LED_JOINT) ?
+			      MT6370_FLCSEN_MASK_ALL :
+			      MT6370_FLCSEN_MASK(led->led_no);
+	u32 enable_mask = MT6370_STROBEN_MASK | led_enable_mask;
+	u32 val = state ? led_enable_mask : 0;
+	u32 prev = priv->fled_strobe_used, curr;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * Only one set of flash control logic,
+	 * use the flag to avoid torch is currently used
+	 */
+	if (priv->fled_torch_used) {
+		dev_warn(lcdev->dev, "Please disable torch first [0x%x]\n",
+				      priv->fled_torch_used);
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	if (state)
+		curr = prev | BIT(led->led_no);
+	else
+		curr = prev & ~BIT(led->led_no);
+
+	if (curr)
+		val |= MT6370_STROBEN_MASK;
+
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN, enable_mask,
+				 val);
+	if (ret) {
+		dev_err(lcdev->dev, "[%d] control current source %d fail\n",
+				     led->led_no, state);
+		goto unlock;
+	}
+
+	/*
+	 * If the flash needs to be on,
+	 * config the flash current ramping up to the setting value.
+	 * Else, always recover back to the minimum one.
+	 */
+	ret = _mt6370_flash_brightness_set(fl_cdev, state ? s->val : s->min);
+	if (ret)
+		goto unlock;
+
+	/*
+	 * For the flash to turn on/off, need to wait HW ramping up/down time
+	 * 5ms/500us to prevent the unexpected problem.
+	 */
+	if (!prev && curr)
+		usleep_range(5000, 6000);
+	else if (prev && !curr)
+		udelay(500);
+
+	priv->fled_strobe_used = curr;
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int mt6370_strobe_get(struct led_classdev_flash *fl_cdev, bool *state)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+
+	mutex_lock(&priv->lock);
+	*state = !!(priv->fled_strobe_used & BIT(led->led_no));
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int mt6370_timeout_set(struct led_classdev_flash *fl_cdev, u32 timeout)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	struct led_flash_setting *s = &fl_cdev->timeout;
+	u32 val = (timeout - s->min) / s->step;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_STRBTO,
+				 MT6370_STRBTO_MASK, val);
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int mt6370_fault_get(struct led_classdev_flash *fl_cdev, u32 *fault)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	u16 fled_stat;
+	unsigned int chg_stat, strobe_timeout_mask, fled_short_mask;
+	u32 rfault = 0;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_read(priv->regmap, MT6370_REG_CHGSTAT2, &chg_stat);
+	if (ret)
+		goto unlock;
+
+	ret = regmap_raw_read(priv->regmap, MT6370_REG_FLEDSTAT1, &fled_stat,
+			      sizeof(fled_stat));
+	if (ret)
+		goto unlock;
+
+	switch (led->led_no) {
+	case MT6370_LED_FLASH1:
+		strobe_timeout_mask = MT6370_FLED1STRBTO_MASK;
+		fled_short_mask = MT6370_FLED1SHORT_MASK;
+		break;
+
+	case MT6370_LED_FLASH2:
+		strobe_timeout_mask = MT6370_FLED2STRBTO_MASK;
+		fled_short_mask = MT6370_FLED2SHORT_MASK;
+		break;
+
+	case MT6370_LED_JOINT:
+		strobe_timeout_mask = MT6370_FLED1STRBTO_MASK |
+				      MT6370_FLED2STRBTO_MASK;
+		fled_short_mask = MT6370_FLED1SHORT_MASK |
+				  MT6370_FLED2SHORT_MASK;
+	}
+
+	if (chg_stat & MT6370_FLEDCHGVINOVP_MASK)
+		rfault |= LED_FAULT_INPUT_VOLTAGE;
+
+	if (fled_stat & strobe_timeout_mask)
+		rfault |= LED_FAULT_TIMEOUT;
+
+	if (fled_stat & fled_short_mask)
+		rfault |= LED_FAULT_SHORT_CIRCUIT;
+
+	if (fled_stat & MT6370_FLEDLVF_MASK)
+		rfault |= LED_FAULT_UNDER_VOLTAGE;
+
+	*fault = rfault;
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static const struct led_flash_ops mt6370_flash_ops = {
+	.flash_brightness_set = mt6370_flash_brightness_set,
+	.strobe_set = mt6370_strobe_set,
+	.strobe_get = mt6370_strobe_get,
+	.timeout_set = mt6370_timeout_set,
+	.fault_get = mt6370_fault_get,
+};
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+static int mt6370_flash_external_strobe_set(struct v4l2_flash *v4l2_flash,
+					    bool enable)
+{
+	struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
+	struct mt6370_led *led = to_mt6370_led(flash, flash);
+	struct mt6370_priv *priv = led->priv;
+	u32 mask = (led->led_no == MT6370_LED_JOINT) ? MT6370_FLCSEN_MASK_ALL :
+		   MT6370_FLCSEN_MASK(led->led_no);
+	u32 val = enable ? mask : 0;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN, mask, val);
+	if (ret)
+		goto unlock;
+
+	if (enable)
+		priv->fled_strobe_used |= BIT(led->led_no);
+	else
+		priv->fled_strobe_used &= ~BIT(led->led_no);
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static const struct v4l2_flash_ops v4l2_flash_ops = {
+	.external_strobe_set = mt6370_flash_external_strobe_set,
+};
+
+static void mt6370_init_v4l2_flash_config(struct mt6370_led *led,
+					  struct v4l2_flash_config *config)
+{
+	struct led_classdev *lcdev;
+	struct led_flash_setting *s = &config->intensity;
+
+	lcdev = &led->flash.led_cdev;
+
+	s->min = MT6370_ITORCH_MIN_UA;
+	s->step = MT6370_ITORCH_STEP_UA;
+	s->val = s->max = s->min + (lcdev->max_brightness - 1) * s->step;
+
+	config->has_external_strobe = 1;
+	strscpy(config->dev_name, lcdev->dev->kobj.name,
+		sizeof(config->dev_name));
+
+	config->flash_faults = LED_FAULT_SHORT_CIRCUIT | LED_FAULT_TIMEOUT |
+			       LED_FAULT_INPUT_VOLTAGE |
+			       LED_FAULT_UNDER_VOLTAGE;
+}
+#else
+static const struct v4l2_flash_ops v4l2_flash_ops;
+static void mt6370_init_v4l2_flash_config(struct mt6370_led *led,
+					  struct v4l2_flash_config *config)
+{
+}
+#endif
+
+static void mt6370_v4l2_flash_release(void *v4l2_flash)
+{
+	v4l2_flash_release(v4l2_flash);
+}
+
+static int mt6370_led_register(struct device *parent, struct mt6370_led *led,
+				struct led_init_data *init_data)
+{
+	struct v4l2_flash_config v4l2_config = {0};
+	int ret;
+
+	ret = devm_led_classdev_flash_register_ext(parent, &led->flash,
+						   init_data);
+	if (ret)
+		return dev_err_probe(parent, ret,
+				     "Couldn't register flash %d\n", led->led_no);
+
+	mt6370_init_v4l2_flash_config(led, &v4l2_config);
+	led->v4l2_flash = v4l2_flash_init(parent, init_data->fwnode,
+					  &led->flash, &v4l2_flash_ops,
+					  &v4l2_config);
+	if (IS_ERR(led->v4l2_flash))
+		return dev_err_probe(parent, PTR_ERR(led->v4l2_flash),
+				     "Failed to register %d v4l2 sd\n", led->led_no);
+
+	return devm_add_action_or_reset(parent, mt6370_v4l2_flash_release,
+					led->v4l2_flash);
+}
+
+static u32 mt6370_clamp(u32 val, u32 min, u32 max, u32 step)
+{
+	u32 retval;
+
+	retval = clamp_val(val, min, max);
+	if (step > 1)
+		retval = rounddown(retval - min, step) + min;
+
+	return retval;
+}
+
+static int mt6370_init_flash_properties(struct mt6370_led *led,
+					struct led_init_data *init_data)
+{
+	struct led_classdev_flash *flash = &led->flash;
+	struct led_classdev *lcdev = &flash->led_cdev;
+	struct mt6370_priv *priv = led->priv;
+	struct led_flash_setting *s;
+	u32 sources[MT6370_MAX_LEDS];
+	u32 max_uA, val;
+	int i, ret, num;
+
+	num = fwnode_property_count_u32(init_data->fwnode, "led-sources");
+	if (num < 1 || num > MT6370_MAX_LEDS)
+		return dev_err_probe(priv->dev, -EINVAL,
+				     "Not specified or wrong number of led-sources\n");
+
+	ret = fwnode_property_read_u32_array(init_data->fwnode, "led-sources", sources, num);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < num; i++) {
+		if (sources[i] >= MT6370_MAX_LEDS)
+			return -EINVAL;
+		if (priv->leds_active & BIT(sources[i]))
+			return -EINVAL;
+		priv->leds_active |= BIT(sources[i]);
+
+	}
+	led->led_no = (num == MT6370_MAX_LEDS) ? MT6370_LED_JOINT :
+		       sources[0];
+
+	max_uA = (num == 2) ? MT6370_ITORCH_DOUBLE_MAX_UA : MT6370_ITORCH_MAX_UA;
+	ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp", &val);
+	if (ret) {
+		dev_warn(priv->dev,
+			 "Not specified led-max-microamp, config to the minimum\n");
+		val = MT6370_ITORCH_MIN_UA;
+	} else {
+		val = mt6370_clamp(val, MT6370_ITORCH_MIN_UA, max_uA,
+				  MT6370_ITORCH_STEP_UA);
+	}
+
+	lcdev->max_brightness = (val - MT6370_ITORCH_MIN_UA) /
+				MT6370_ITORCH_STEP_UA + 1;
+	lcdev->brightness_set_blocking = mt6370_torch_brightness_set;
+	lcdev->flags |= LED_DEV_CAP_FLASH;
+
+	max_uA = (num == 2) ? MT6370_ISTRB_DOUBLE_MAX_UA : MT6370_ISTRB_MAX_UA;
+	ret = fwnode_property_read_u32(init_data->fwnode, "flash-max-microamp", &val);
+	if (ret) {
+		dev_warn(priv->dev,
+		   "Not specified flash-max-microamp, config to the minimum\n");
+		val = MT6370_ISTRB_MIN_UA;
+	} else {
+		val = mt6370_clamp(val, MT6370_ISTRB_MIN_UA, max_uA,
+				  MT6370_ISTRB_STEP_UA);
+	}
+
+	s = &flash->brightness;
+	s->min = MT6370_ISTRB_MIN_UA;
+	s->step = MT6370_ISTRB_STEP_UA;
+	s->val = s->max = val;
+
+	/*
+	 * Always configure as min level when off to
+	 * prevent flash current spike
+	 */
+	ret = _mt6370_flash_brightness_set(flash, s->min);
+	if (ret)
+		return ret;
+
+	ret = fwnode_property_read_u32(init_data->fwnode,
+				       "flash-max-timeout-us", &val);
+	if (ret) {
+		dev_warn(priv->dev,
+			 "Not specified flash-max-timeout-us, config to the minimum\n");
+		val = MT6370_STRBTO_MIN_US;
+	} else {
+		val = mt6370_clamp(val, MT6370_STRBTO_MIN_US,
+				   MT6370_STRBTO_MAX_US, MT6370_STRBTO_STEP_US);
+	}
+
+	s = &flash->timeout;
+	s->min = MT6370_STRBTO_MIN_US;
+	s->step = MT6370_STRBTO_STEP_US;
+	s->val = s->max = val;
+
+	flash->ops = &mt6370_flash_ops;
+
+	return 0;
+}
+
+static int mt6370_init_common_properties(struct mt6370_led *led,
+					 struct led_init_data *init_data)
+{
+	const char * const states[] = { "off", "keep", "on" };
+	const char *str = states[STATE_OFF];
+	int ret;
+
+	fwnode_property_read_string(init_data->fwnode, "default-state", &str);
+	ret = match_string(states, ARRAY_SIZE(states), str);
+	if (ret >= 0)
+		led->default_state = ret;
+
+	return 0;
+}
+
+static int mt6370_led_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mt6370_priv *priv;
+	struct fwnode_handle *child;
+	size_t count;
+	int i = 0, ret;
+
+	count = device_get_child_node_count(dev);
+	if (!count || count > MT6370_MAX_LEDS)
+		return dev_err_probe(dev, -EINVAL,
+		       "No child node or node count over max led number %zu\n", count);
+
+	priv = devm_kzalloc(dev, struct_size(priv, leds, count), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->leds_count = count;
+	priv->dev = dev;
+	mutex_init(&priv->lock);
+
+	priv->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!priv->regmap)
+		return dev_err_probe(dev, -ENODEV, "Failed to get parent regmap\n");
+
+	device_for_each_child_node(dev, child) {
+		struct mt6370_led *led = priv->leds + i;
+		struct led_init_data init_data = { .fwnode = child, };
+
+		led->priv = priv;
+		ret = mt6370_init_common_properties(led, &init_data);
+		if (ret)
+			return ret;
+
+		ret = mt6370_init_flash_properties(led, &init_data);
+
+		if (ret)
+			return ret;
+
+		ret = mt6370_led_register(dev, led, &init_data);
+		if (ret)
+			return ret;
+
+		i++;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id mt6370_led_of_id[] = {
+	{ .compatible = "mediatek,mt6370-flashlight" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mt6370_led_of_id);
+
+static struct platform_driver mt6370_led_driver = {
+	.driver = {
+		.name = "mt6370-flashlight",
+		.of_match_table = mt6370_led_of_id,
+	},
+	.probe = mt6370_led_probe,
+};
+module_platform_driver(mt6370_led_driver);
+
+MODULE_AUTHOR("Alice Chen <alice_chen@richtek.com>");
+MODULE_DESCRIPTION("MT6370 FLASH LED Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: ChiaEn Wu <peterwu.pub@gmail.com>
To: lee.jones@linaro.org, daniel.thompson@linaro.org,
	jingoohan1@gmail.com, pavel@ucw.cz, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, matthias.bgg@gmail.com,
	sre@kernel.org, chunfeng.yun@mediatek.com,
	gregkh@linuxfoundation.org, jic23@kernel.org, lars@metafoo.de,
	lgirdwood@gmail.com, broonie@kernel.org, linux@roeck-us.net,
	heikki.krogerus@linux.intel.com, deller@gmx.de,
	andy.shevchenko@gmail.com
Cc: devicetree@vger.kernel.org, linux-fbdev@vger.kernel.org,
	szunichen@gmail.com, alice_chen@richtek.com,
	linux-pm@vger.kernel.org, linux-iio@vger.kernel.org,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org, cy_huang@richtek.com,
	chiaen_wu@richtek.com, linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, linux-leds@vger.kernel.org
Subject: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
Date: Fri, 22 Jul 2022 18:24:06 +0800	[thread overview]
Message-ID: <20220722102407.2205-13-peterwu.pub@gmail.com> (raw)
In-Reply-To: <20220722102407.2205-1-peterwu.pub@gmail.com>

From: Alice Chen <alice_chen@richtek.com>

The MediaTek MT6370 is a highly-integrated smart power management IC,
which includes a single cell Li-Ion/Li-Polymer switching battery
charger, a USB Type-C & Power Delivery (PD) controller, dual Flash
LED current sources, a RGB LED driver, a backlight WLED driver,
a display bias driver and a general LDO for portable devices.

The Flash LED in MT6370 has 2 channels and support torch/strobe mode.
Add the support of MT6370 FLASH LED.

Signed-off-by: Alice Chen <alice_chen@richtek.com>
---

v6
- Use 'GENMASK' instead of 'BIT'.
- Use dev_err_probe to decrease LOC.
- Use 'dev' variable to make probe function more clean.
- Refine the return of _mt6370_flash_brightness_set function.
- Refine the descriptions.
- Use mt6370_clamp() instead of clamp_align().
- Use device resource managed API for v4l2 flash_release.
---
 drivers/leds/flash/Kconfig             |  12 +
 drivers/leds/flash/Makefile            |   1 +
 drivers/leds/flash/leds-mt6370-flash.c | 633 +++++++++++++++++++++++++++++++++
 3 files changed, 646 insertions(+)
 create mode 100644 drivers/leds/flash/leds-mt6370-flash.c

diff --git a/drivers/leds/flash/Kconfig b/drivers/leds/flash/Kconfig
index d3eb689..d5761ed 100644
--- a/drivers/leds/flash/Kconfig
+++ b/drivers/leds/flash/Kconfig
@@ -90,4 +90,16 @@ config LEDS_SGM3140
 	  This option enables support for the SGM3140 500mA Buck/Boost Charge
 	  Pump LED Driver.
 
+config LEDS_MT6370_FLASHLIGHT
+	tristate "Flash LED Support for MediaTek MT6370 PMIC"
+	depends on LEDS_CLASS
+	depends on MFD_MT6370
+	help
+	  Support 2 channels and torch/strobe mode.
+	  Say Y here to enable support for
+	  MT6370_FLASH_LED device.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "leds-mt6370-flash".
+
 endif # LEDS_CLASS_FLASH
diff --git a/drivers/leds/flash/Makefile b/drivers/leds/flash/Makefile
index 0acbddc..4c4c171 100644
--- a/drivers/leds/flash/Makefile
+++ b/drivers/leds/flash/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_LEDS_MAX77693)	+= leds-max77693.o
 obj-$(CONFIG_LEDS_RT4505)	+= leds-rt4505.o
 obj-$(CONFIG_LEDS_RT8515)	+= leds-rt8515.o
 obj-$(CONFIG_LEDS_SGM3140)	+= leds-sgm3140.o
+obj-$(CONFIG_LEDS_MT6370_FLASHLIGHT)	+= leds-mt6370-flash.o
diff --git a/drivers/leds/flash/leds-mt6370-flash.c b/drivers/leds/flash/leds-mt6370-flash.c
new file mode 100644
index 0000000..fe439ee
--- /dev/null
+++ b/drivers/leds/flash/leds-mt6370-flash.c
@@ -0,0 +1,633 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Richtek Technology Corp.
+ *
+ * Author: Alice Chen <alice_chen@richtek.com
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include <media/v4l2-flash-led-class.h>
+
+enum {
+	MT6370_LED_FLASH1,
+	MT6370_LED_FLASH2,
+	MT6370_MAX_LEDS
+};
+
+/* Virtual definition for multicolor */
+
+#define MT6370_REG_FLEDEN		0x17E
+#define MT6370_REG_STRBTO		0x173
+#define MT6370_REG_CHGSTAT2		0x1D1
+#define MT6370_REG_FLEDSTAT1		0x1D9
+#define	MT6370_REG_FLEDISTRB(_id)	(0x174 + 4 * _id)
+#define MT6370_REG_FLEDITOR(_id)	(0x175 + 4 * _id)
+#define MT6370_ITORCH_MASK		GENMASK(4, 0)
+#define MT6370_ISTROBE_MASK		GENMASK(6, 0)
+#define MT6370_STRBTO_MASK		GENMASK(6, 0)
+#define MT6370_TORCHEN_MASK		BIT(3)
+#define MT6370_STROBEN_MASK		BIT(2)
+#define MT6370_FLCSEN_MASK(_id)		BIT(MT6370_LED_FLASH2 - _id)
+#define MT6370_FLCSEN_MASK_ALL		GENMASK(1, 0)
+#define MT6370_FLEDCHGVINOVP_MASK	BIT(3)
+#define MT6370_FLED1STRBTO_MASK		BIT(11)
+#define MT6370_FLED2STRBTO_MASK		BIT(10)
+#define MT6370_FLED1STRB_MASK		BIT(9)
+#define MT6370_FLED2STRB_MASK		BIT(8)
+#define MT6370_FLED1SHORT_MASK		BIT(7)
+#define MT6370_FLED2SHORT_MASK		BIT(6)
+#define MT6370_FLEDLVF_MASK		BIT(3)
+
+#define MT6370_LED_JOINT		2
+#define MT6370_RANGE_FLED_REG		4
+#define MT6370_ITORCH_MIN_UA		25000
+#define MT6370_ITORCH_STEP_UA		12500
+#define MT6370_ITORCH_MAX_UA		400000
+#define MT6370_ITORCH_DOUBLE_MAX_UA	800000
+#define MT6370_ISTRB_MIN_UA		50000
+#define MT6370_ISTRB_STEP_UA		12500
+#define MT6370_ISTRB_MAX_UA		1500000
+#define MT6370_ISTRB_DOUBLE_MAX_UA	3000000
+#define MT6370_STRBTO_MIN_US		64000
+#define MT6370_STRBTO_STEP_US		32000
+#define MT6370_STRBTO_MAX_US		2432000
+
+#define STATE_OFF			0
+#define STATE_KEEP			1
+#define STATE_ON			2
+
+#define to_mt6370_led(ptr, member) container_of(ptr, struct mt6370_led, member)
+
+struct mt6370_led {
+	struct led_classdev_flash flash;
+	struct v4l2_flash *v4l2_flash;
+	struct mt6370_priv *priv;
+	u32 led_no;
+	u32 default_state;
+};
+
+struct mt6370_priv {
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex lock;
+	unsigned int fled_strobe_used;
+	unsigned int fled_torch_used;
+	unsigned int leds_active;
+	unsigned int leds_count;
+	struct mt6370_led leds[];
+};
+
+static int mt6370_torch_brightness_set(struct led_classdev *lcdev,
+				       enum led_brightness level)
+{
+	struct mt6370_led *led = to_mt6370_led(lcdev, flash.led_cdev);
+	struct mt6370_priv *priv = led->priv;
+	u32 led_enable_mask = (led->led_no == MT6370_LED_JOINT) ?
+			      MT6370_FLCSEN_MASK_ALL :
+			      MT6370_FLCSEN_MASK(led->led_no);
+	u32 enable_mask = MT6370_TORCHEN_MASK | led_enable_mask;
+	u32 val = level ? led_enable_mask : 0;
+	u32 prev = priv->fled_torch_used, curr;
+	int ret, i;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * Only one set of flash control logic,
+	 * use the flag to avoid strobe is currently used.
+	 */
+	if (priv->fled_strobe_used) {
+		dev_warn(lcdev->dev, "Please disable strobe first [%d]\n",
+			 priv->fled_strobe_used);
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	if (level)
+		curr = prev | BIT(led->led_no);
+	else
+		curr = prev & ~BIT(led->led_no);
+
+	if (curr)
+		val |= MT6370_TORCHEN_MASK;
+
+	if (level) {
+		level -= 1;
+		if (led->led_no == MT6370_LED_JOINT) {
+			int flevel[MT6370_MAX_LEDS];
+
+			flevel[0] = level / 2;
+			flevel[1] = level - flevel[0];
+			for (i = 0; i < MT6370_MAX_LEDS; i++) {
+				ret = regmap_update_bits(priv->regmap,
+						MT6370_REG_FLEDITOR(i),
+						MT6370_ITORCH_MASK, flevel[i]);
+				if (ret)
+					goto unlock;
+			}
+		} else {
+			ret = regmap_update_bits(priv->regmap,
+					MT6370_REG_FLEDITOR(led->led_no),
+					MT6370_ITORCH_MASK, level);
+			if (ret)
+				goto unlock;
+		}
+	}
+
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN,
+				 enable_mask, val);
+	if (ret)
+		goto unlock;
+
+	priv->fled_torch_used = curr;
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int mt6370_flash_brightness_set(struct led_classdev_flash *fl_cdev,
+				       u32 brightness)
+{
+	/*
+	 * Due to the current spike when turning on flash,
+	 * let brightness be kept by the framework.
+	 * This empty function is used to
+	 * prevent led_classdev_flash register ops check failure.
+	 */
+	return 0;
+}
+
+static int _mt6370_flash_brightness_set(struct led_classdev_flash *fl_cdev,
+					u32 brightness)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	struct led_flash_setting *s = &fl_cdev->brightness;
+	u32 val = (brightness - s->min) / s->step;
+	int ret, i;
+
+	if (led->led_no == MT6370_LED_JOINT) {
+		int flevel[MT6370_MAX_LEDS];
+
+		flevel[0] = val / 2;
+		flevel[1] = val - flevel[0];
+		for (i = 0; i < MT6370_MAX_LEDS; i++) {
+			ret = regmap_update_bits(priv->regmap,
+						 MT6370_REG_FLEDISTRB(i),
+						 MT6370_ISTROBE_MASK, flevel[i]);
+			if (ret)
+				return ret;
+		}
+	} else {
+		return regmap_update_bits(priv->regmap,
+					  MT6370_REG_FLEDISTRB(led->led_no),
+					  MT6370_ISTROBE_MASK, val);
+	}
+
+	return 0;
+}
+
+static int mt6370_strobe_set(struct led_classdev_flash *fl_cdev, bool state)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	struct led_classdev *lcdev = &fl_cdev->led_cdev;
+	struct led_flash_setting *s = &fl_cdev->brightness;
+	u32 led_enable_mask = (led->led_no == MT6370_LED_JOINT) ?
+			      MT6370_FLCSEN_MASK_ALL :
+			      MT6370_FLCSEN_MASK(led->led_no);
+	u32 enable_mask = MT6370_STROBEN_MASK | led_enable_mask;
+	u32 val = state ? led_enable_mask : 0;
+	u32 prev = priv->fled_strobe_used, curr;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * Only one set of flash control logic,
+	 * use the flag to avoid torch is currently used
+	 */
+	if (priv->fled_torch_used) {
+		dev_warn(lcdev->dev, "Please disable torch first [0x%x]\n",
+				      priv->fled_torch_used);
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	if (state)
+		curr = prev | BIT(led->led_no);
+	else
+		curr = prev & ~BIT(led->led_no);
+
+	if (curr)
+		val |= MT6370_STROBEN_MASK;
+
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN, enable_mask,
+				 val);
+	if (ret) {
+		dev_err(lcdev->dev, "[%d] control current source %d fail\n",
+				     led->led_no, state);
+		goto unlock;
+	}
+
+	/*
+	 * If the flash needs to be on,
+	 * config the flash current ramping up to the setting value.
+	 * Else, always recover back to the minimum one.
+	 */
+	ret = _mt6370_flash_brightness_set(fl_cdev, state ? s->val : s->min);
+	if (ret)
+		goto unlock;
+
+	/*
+	 * For the flash to turn on/off, need to wait HW ramping up/down time
+	 * 5ms/500us to prevent the unexpected problem.
+	 */
+	if (!prev && curr)
+		usleep_range(5000, 6000);
+	else if (prev && !curr)
+		udelay(500);
+
+	priv->fled_strobe_used = curr;
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int mt6370_strobe_get(struct led_classdev_flash *fl_cdev, bool *state)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+
+	mutex_lock(&priv->lock);
+	*state = !!(priv->fled_strobe_used & BIT(led->led_no));
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int mt6370_timeout_set(struct led_classdev_flash *fl_cdev, u32 timeout)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	struct led_flash_setting *s = &fl_cdev->timeout;
+	u32 val = (timeout - s->min) / s->step;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_STRBTO,
+				 MT6370_STRBTO_MASK, val);
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int mt6370_fault_get(struct led_classdev_flash *fl_cdev, u32 *fault)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	u16 fled_stat;
+	unsigned int chg_stat, strobe_timeout_mask, fled_short_mask;
+	u32 rfault = 0;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_read(priv->regmap, MT6370_REG_CHGSTAT2, &chg_stat);
+	if (ret)
+		goto unlock;
+
+	ret = regmap_raw_read(priv->regmap, MT6370_REG_FLEDSTAT1, &fled_stat,
+			      sizeof(fled_stat));
+	if (ret)
+		goto unlock;
+
+	switch (led->led_no) {
+	case MT6370_LED_FLASH1:
+		strobe_timeout_mask = MT6370_FLED1STRBTO_MASK;
+		fled_short_mask = MT6370_FLED1SHORT_MASK;
+		break;
+
+	case MT6370_LED_FLASH2:
+		strobe_timeout_mask = MT6370_FLED2STRBTO_MASK;
+		fled_short_mask = MT6370_FLED2SHORT_MASK;
+		break;
+
+	case MT6370_LED_JOINT:
+		strobe_timeout_mask = MT6370_FLED1STRBTO_MASK |
+				      MT6370_FLED2STRBTO_MASK;
+		fled_short_mask = MT6370_FLED1SHORT_MASK |
+				  MT6370_FLED2SHORT_MASK;
+	}
+
+	if (chg_stat & MT6370_FLEDCHGVINOVP_MASK)
+		rfault |= LED_FAULT_INPUT_VOLTAGE;
+
+	if (fled_stat & strobe_timeout_mask)
+		rfault |= LED_FAULT_TIMEOUT;
+
+	if (fled_stat & fled_short_mask)
+		rfault |= LED_FAULT_SHORT_CIRCUIT;
+
+	if (fled_stat & MT6370_FLEDLVF_MASK)
+		rfault |= LED_FAULT_UNDER_VOLTAGE;
+
+	*fault = rfault;
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static const struct led_flash_ops mt6370_flash_ops = {
+	.flash_brightness_set = mt6370_flash_brightness_set,
+	.strobe_set = mt6370_strobe_set,
+	.strobe_get = mt6370_strobe_get,
+	.timeout_set = mt6370_timeout_set,
+	.fault_get = mt6370_fault_get,
+};
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+static int mt6370_flash_external_strobe_set(struct v4l2_flash *v4l2_flash,
+					    bool enable)
+{
+	struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
+	struct mt6370_led *led = to_mt6370_led(flash, flash);
+	struct mt6370_priv *priv = led->priv;
+	u32 mask = (led->led_no == MT6370_LED_JOINT) ? MT6370_FLCSEN_MASK_ALL :
+		   MT6370_FLCSEN_MASK(led->led_no);
+	u32 val = enable ? mask : 0;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN, mask, val);
+	if (ret)
+		goto unlock;
+
+	if (enable)
+		priv->fled_strobe_used |= BIT(led->led_no);
+	else
+		priv->fled_strobe_used &= ~BIT(led->led_no);
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static const struct v4l2_flash_ops v4l2_flash_ops = {
+	.external_strobe_set = mt6370_flash_external_strobe_set,
+};
+
+static void mt6370_init_v4l2_flash_config(struct mt6370_led *led,
+					  struct v4l2_flash_config *config)
+{
+	struct led_classdev *lcdev;
+	struct led_flash_setting *s = &config->intensity;
+
+	lcdev = &led->flash.led_cdev;
+
+	s->min = MT6370_ITORCH_MIN_UA;
+	s->step = MT6370_ITORCH_STEP_UA;
+	s->val = s->max = s->min + (lcdev->max_brightness - 1) * s->step;
+
+	config->has_external_strobe = 1;
+	strscpy(config->dev_name, lcdev->dev->kobj.name,
+		sizeof(config->dev_name));
+
+	config->flash_faults = LED_FAULT_SHORT_CIRCUIT | LED_FAULT_TIMEOUT |
+			       LED_FAULT_INPUT_VOLTAGE |
+			       LED_FAULT_UNDER_VOLTAGE;
+}
+#else
+static const struct v4l2_flash_ops v4l2_flash_ops;
+static void mt6370_init_v4l2_flash_config(struct mt6370_led *led,
+					  struct v4l2_flash_config *config)
+{
+}
+#endif
+
+static void mt6370_v4l2_flash_release(void *v4l2_flash)
+{
+	v4l2_flash_release(v4l2_flash);
+}
+
+static int mt6370_led_register(struct device *parent, struct mt6370_led *led,
+				struct led_init_data *init_data)
+{
+	struct v4l2_flash_config v4l2_config = {0};
+	int ret;
+
+	ret = devm_led_classdev_flash_register_ext(parent, &led->flash,
+						   init_data);
+	if (ret)
+		return dev_err_probe(parent, ret,
+				     "Couldn't register flash %d\n", led->led_no);
+
+	mt6370_init_v4l2_flash_config(led, &v4l2_config);
+	led->v4l2_flash = v4l2_flash_init(parent, init_data->fwnode,
+					  &led->flash, &v4l2_flash_ops,
+					  &v4l2_config);
+	if (IS_ERR(led->v4l2_flash))
+		return dev_err_probe(parent, PTR_ERR(led->v4l2_flash),
+				     "Failed to register %d v4l2 sd\n", led->led_no);
+
+	return devm_add_action_or_reset(parent, mt6370_v4l2_flash_release,
+					led->v4l2_flash);
+}
+
+static u32 mt6370_clamp(u32 val, u32 min, u32 max, u32 step)
+{
+	u32 retval;
+
+	retval = clamp_val(val, min, max);
+	if (step > 1)
+		retval = rounddown(retval - min, step) + min;
+
+	return retval;
+}
+
+static int mt6370_init_flash_properties(struct mt6370_led *led,
+					struct led_init_data *init_data)
+{
+	struct led_classdev_flash *flash = &led->flash;
+	struct led_classdev *lcdev = &flash->led_cdev;
+	struct mt6370_priv *priv = led->priv;
+	struct led_flash_setting *s;
+	u32 sources[MT6370_MAX_LEDS];
+	u32 max_uA, val;
+	int i, ret, num;
+
+	num = fwnode_property_count_u32(init_data->fwnode, "led-sources");
+	if (num < 1 || num > MT6370_MAX_LEDS)
+		return dev_err_probe(priv->dev, -EINVAL,
+				     "Not specified or wrong number of led-sources\n");
+
+	ret = fwnode_property_read_u32_array(init_data->fwnode, "led-sources", sources, num);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < num; i++) {
+		if (sources[i] >= MT6370_MAX_LEDS)
+			return -EINVAL;
+		if (priv->leds_active & BIT(sources[i]))
+			return -EINVAL;
+		priv->leds_active |= BIT(sources[i]);
+
+	}
+	led->led_no = (num == MT6370_MAX_LEDS) ? MT6370_LED_JOINT :
+		       sources[0];
+
+	max_uA = (num == 2) ? MT6370_ITORCH_DOUBLE_MAX_UA : MT6370_ITORCH_MAX_UA;
+	ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp", &val);
+	if (ret) {
+		dev_warn(priv->dev,
+			 "Not specified led-max-microamp, config to the minimum\n");
+		val = MT6370_ITORCH_MIN_UA;
+	} else {
+		val = mt6370_clamp(val, MT6370_ITORCH_MIN_UA, max_uA,
+				  MT6370_ITORCH_STEP_UA);
+	}
+
+	lcdev->max_brightness = (val - MT6370_ITORCH_MIN_UA) /
+				MT6370_ITORCH_STEP_UA + 1;
+	lcdev->brightness_set_blocking = mt6370_torch_brightness_set;
+	lcdev->flags |= LED_DEV_CAP_FLASH;
+
+	max_uA = (num == 2) ? MT6370_ISTRB_DOUBLE_MAX_UA : MT6370_ISTRB_MAX_UA;
+	ret = fwnode_property_read_u32(init_data->fwnode, "flash-max-microamp", &val);
+	if (ret) {
+		dev_warn(priv->dev,
+		   "Not specified flash-max-microamp, config to the minimum\n");
+		val = MT6370_ISTRB_MIN_UA;
+	} else {
+		val = mt6370_clamp(val, MT6370_ISTRB_MIN_UA, max_uA,
+				  MT6370_ISTRB_STEP_UA);
+	}
+
+	s = &flash->brightness;
+	s->min = MT6370_ISTRB_MIN_UA;
+	s->step = MT6370_ISTRB_STEP_UA;
+	s->val = s->max = val;
+
+	/*
+	 * Always configure as min level when off to
+	 * prevent flash current spike
+	 */
+	ret = _mt6370_flash_brightness_set(flash, s->min);
+	if (ret)
+		return ret;
+
+	ret = fwnode_property_read_u32(init_data->fwnode,
+				       "flash-max-timeout-us", &val);
+	if (ret) {
+		dev_warn(priv->dev,
+			 "Not specified flash-max-timeout-us, config to the minimum\n");
+		val = MT6370_STRBTO_MIN_US;
+	} else {
+		val = mt6370_clamp(val, MT6370_STRBTO_MIN_US,
+				   MT6370_STRBTO_MAX_US, MT6370_STRBTO_STEP_US);
+	}
+
+	s = &flash->timeout;
+	s->min = MT6370_STRBTO_MIN_US;
+	s->step = MT6370_STRBTO_STEP_US;
+	s->val = s->max = val;
+
+	flash->ops = &mt6370_flash_ops;
+
+	return 0;
+}
+
+static int mt6370_init_common_properties(struct mt6370_led *led,
+					 struct led_init_data *init_data)
+{
+	const char * const states[] = { "off", "keep", "on" };
+	const char *str = states[STATE_OFF];
+	int ret;
+
+	fwnode_property_read_string(init_data->fwnode, "default-state", &str);
+	ret = match_string(states, ARRAY_SIZE(states), str);
+	if (ret >= 0)
+		led->default_state = ret;
+
+	return 0;
+}
+
+static int mt6370_led_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mt6370_priv *priv;
+	struct fwnode_handle *child;
+	size_t count;
+	int i = 0, ret;
+
+	count = device_get_child_node_count(dev);
+	if (!count || count > MT6370_MAX_LEDS)
+		return dev_err_probe(dev, -EINVAL,
+		       "No child node or node count over max led number %zu\n", count);
+
+	priv = devm_kzalloc(dev, struct_size(priv, leds, count), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->leds_count = count;
+	priv->dev = dev;
+	mutex_init(&priv->lock);
+
+	priv->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!priv->regmap)
+		return dev_err_probe(dev, -ENODEV, "Failed to get parent regmap\n");
+
+	device_for_each_child_node(dev, child) {
+		struct mt6370_led *led = priv->leds + i;
+		struct led_init_data init_data = { .fwnode = child, };
+
+		led->priv = priv;
+		ret = mt6370_init_common_properties(led, &init_data);
+		if (ret)
+			return ret;
+
+		ret = mt6370_init_flash_properties(led, &init_data);
+
+		if (ret)
+			return ret;
+
+		ret = mt6370_led_register(dev, led, &init_data);
+		if (ret)
+			return ret;
+
+		i++;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id mt6370_led_of_id[] = {
+	{ .compatible = "mediatek,mt6370-flashlight" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mt6370_led_of_id);
+
+static struct platform_driver mt6370_led_driver = {
+	.driver = {
+		.name = "mt6370-flashlight",
+		.of_match_table = mt6370_led_of_id,
+	},
+	.probe = mt6370_led_probe,
+};
+module_platform_driver(mt6370_led_driver);
+
+MODULE_AUTHOR("Alice Chen <alice_chen@richtek.com>");
+MODULE_DESCRIPTION("MT6370 FLASH LED Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: ChiaEn Wu <peterwu.pub@gmail.com>
To: lee.jones@linaro.org, daniel.thompson@linaro.org,
	jingoohan1@gmail.com, pavel@ucw.cz, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, matthias.bgg@gmail.com,
	sre@kernel.org, chunfeng.yun@mediatek.com,
	gregkh@linuxfoundation.org, jic23@kernel.org, lars@metafoo.de,
	lgirdwood@gmail.com, broonie@kernel.org, linux@roeck-us.net,
	heikki.krogerus@linux.intel.com, deller@gmx.de,
	andy.shevchenko@gmail.com
Cc: chiaen_wu@richtek.com, alice_chen@richtek.com,
	cy_huang@richtek.com, dri-devel@lists.freedesktop.org,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-iio@vger.kernel.org, linux-fbdev@vger.kernel.org,
	szunichen@gmail.com
Subject: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
Date: Fri, 22 Jul 2022 18:24:06 +0800	[thread overview]
Message-ID: <20220722102407.2205-13-peterwu.pub@gmail.com> (raw)
In-Reply-To: <20220722102407.2205-1-peterwu.pub@gmail.com>

From: Alice Chen <alice_chen@richtek.com>

The MediaTek MT6370 is a highly-integrated smart power management IC,
which includes a single cell Li-Ion/Li-Polymer switching battery
charger, a USB Type-C & Power Delivery (PD) controller, dual Flash
LED current sources, a RGB LED driver, a backlight WLED driver,
a display bias driver and a general LDO for portable devices.

The Flash LED in MT6370 has 2 channels and support torch/strobe mode.
Add the support of MT6370 FLASH LED.

Signed-off-by: Alice Chen <alice_chen@richtek.com>
---

v6
- Use 'GENMASK' instead of 'BIT'.
- Use dev_err_probe to decrease LOC.
- Use 'dev' variable to make probe function more clean.
- Refine the return of _mt6370_flash_brightness_set function.
- Refine the descriptions.
- Use mt6370_clamp() instead of clamp_align().
- Use device resource managed API for v4l2 flash_release.
---
 drivers/leds/flash/Kconfig             |  12 +
 drivers/leds/flash/Makefile            |   1 +
 drivers/leds/flash/leds-mt6370-flash.c | 633 +++++++++++++++++++++++++++++++++
 3 files changed, 646 insertions(+)
 create mode 100644 drivers/leds/flash/leds-mt6370-flash.c

diff --git a/drivers/leds/flash/Kconfig b/drivers/leds/flash/Kconfig
index d3eb689..d5761ed 100644
--- a/drivers/leds/flash/Kconfig
+++ b/drivers/leds/flash/Kconfig
@@ -90,4 +90,16 @@ config LEDS_SGM3140
 	  This option enables support for the SGM3140 500mA Buck/Boost Charge
 	  Pump LED Driver.
 
+config LEDS_MT6370_FLASHLIGHT
+	tristate "Flash LED Support for MediaTek MT6370 PMIC"
+	depends on LEDS_CLASS
+	depends on MFD_MT6370
+	help
+	  Support 2 channels and torch/strobe mode.
+	  Say Y here to enable support for
+	  MT6370_FLASH_LED device.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "leds-mt6370-flash".
+
 endif # LEDS_CLASS_FLASH
diff --git a/drivers/leds/flash/Makefile b/drivers/leds/flash/Makefile
index 0acbddc..4c4c171 100644
--- a/drivers/leds/flash/Makefile
+++ b/drivers/leds/flash/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_LEDS_MAX77693)	+= leds-max77693.o
 obj-$(CONFIG_LEDS_RT4505)	+= leds-rt4505.o
 obj-$(CONFIG_LEDS_RT8515)	+= leds-rt8515.o
 obj-$(CONFIG_LEDS_SGM3140)	+= leds-sgm3140.o
+obj-$(CONFIG_LEDS_MT6370_FLASHLIGHT)	+= leds-mt6370-flash.o
diff --git a/drivers/leds/flash/leds-mt6370-flash.c b/drivers/leds/flash/leds-mt6370-flash.c
new file mode 100644
index 0000000..fe439ee
--- /dev/null
+++ b/drivers/leds/flash/leds-mt6370-flash.c
@@ -0,0 +1,633 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Richtek Technology Corp.
+ *
+ * Author: Alice Chen <alice_chen@richtek.com
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include <media/v4l2-flash-led-class.h>
+
+enum {
+	MT6370_LED_FLASH1,
+	MT6370_LED_FLASH2,
+	MT6370_MAX_LEDS
+};
+
+/* Virtual definition for multicolor */
+
+#define MT6370_REG_FLEDEN		0x17E
+#define MT6370_REG_STRBTO		0x173
+#define MT6370_REG_CHGSTAT2		0x1D1
+#define MT6370_REG_FLEDSTAT1		0x1D9
+#define	MT6370_REG_FLEDISTRB(_id)	(0x174 + 4 * _id)
+#define MT6370_REG_FLEDITOR(_id)	(0x175 + 4 * _id)
+#define MT6370_ITORCH_MASK		GENMASK(4, 0)
+#define MT6370_ISTROBE_MASK		GENMASK(6, 0)
+#define MT6370_STRBTO_MASK		GENMASK(6, 0)
+#define MT6370_TORCHEN_MASK		BIT(3)
+#define MT6370_STROBEN_MASK		BIT(2)
+#define MT6370_FLCSEN_MASK(_id)		BIT(MT6370_LED_FLASH2 - _id)
+#define MT6370_FLCSEN_MASK_ALL		GENMASK(1, 0)
+#define MT6370_FLEDCHGVINOVP_MASK	BIT(3)
+#define MT6370_FLED1STRBTO_MASK		BIT(11)
+#define MT6370_FLED2STRBTO_MASK		BIT(10)
+#define MT6370_FLED1STRB_MASK		BIT(9)
+#define MT6370_FLED2STRB_MASK		BIT(8)
+#define MT6370_FLED1SHORT_MASK		BIT(7)
+#define MT6370_FLED2SHORT_MASK		BIT(6)
+#define MT6370_FLEDLVF_MASK		BIT(3)
+
+#define MT6370_LED_JOINT		2
+#define MT6370_RANGE_FLED_REG		4
+#define MT6370_ITORCH_MIN_UA		25000
+#define MT6370_ITORCH_STEP_UA		12500
+#define MT6370_ITORCH_MAX_UA		400000
+#define MT6370_ITORCH_DOUBLE_MAX_UA	800000
+#define MT6370_ISTRB_MIN_UA		50000
+#define MT6370_ISTRB_STEP_UA		12500
+#define MT6370_ISTRB_MAX_UA		1500000
+#define MT6370_ISTRB_DOUBLE_MAX_UA	3000000
+#define MT6370_STRBTO_MIN_US		64000
+#define MT6370_STRBTO_STEP_US		32000
+#define MT6370_STRBTO_MAX_US		2432000
+
+#define STATE_OFF			0
+#define STATE_KEEP			1
+#define STATE_ON			2
+
+#define to_mt6370_led(ptr, member) container_of(ptr, struct mt6370_led, member)
+
+struct mt6370_led {
+	struct led_classdev_flash flash;
+	struct v4l2_flash *v4l2_flash;
+	struct mt6370_priv *priv;
+	u32 led_no;
+	u32 default_state;
+};
+
+struct mt6370_priv {
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex lock;
+	unsigned int fled_strobe_used;
+	unsigned int fled_torch_used;
+	unsigned int leds_active;
+	unsigned int leds_count;
+	struct mt6370_led leds[];
+};
+
+static int mt6370_torch_brightness_set(struct led_classdev *lcdev,
+				       enum led_brightness level)
+{
+	struct mt6370_led *led = to_mt6370_led(lcdev, flash.led_cdev);
+	struct mt6370_priv *priv = led->priv;
+	u32 led_enable_mask = (led->led_no == MT6370_LED_JOINT) ?
+			      MT6370_FLCSEN_MASK_ALL :
+			      MT6370_FLCSEN_MASK(led->led_no);
+	u32 enable_mask = MT6370_TORCHEN_MASK | led_enable_mask;
+	u32 val = level ? led_enable_mask : 0;
+	u32 prev = priv->fled_torch_used, curr;
+	int ret, i;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * Only one set of flash control logic,
+	 * use the flag to avoid strobe is currently used.
+	 */
+	if (priv->fled_strobe_used) {
+		dev_warn(lcdev->dev, "Please disable strobe first [%d]\n",
+			 priv->fled_strobe_used);
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	if (level)
+		curr = prev | BIT(led->led_no);
+	else
+		curr = prev & ~BIT(led->led_no);
+
+	if (curr)
+		val |= MT6370_TORCHEN_MASK;
+
+	if (level) {
+		level -= 1;
+		if (led->led_no == MT6370_LED_JOINT) {
+			int flevel[MT6370_MAX_LEDS];
+
+			flevel[0] = level / 2;
+			flevel[1] = level - flevel[0];
+			for (i = 0; i < MT6370_MAX_LEDS; i++) {
+				ret = regmap_update_bits(priv->regmap,
+						MT6370_REG_FLEDITOR(i),
+						MT6370_ITORCH_MASK, flevel[i]);
+				if (ret)
+					goto unlock;
+			}
+		} else {
+			ret = regmap_update_bits(priv->regmap,
+					MT6370_REG_FLEDITOR(led->led_no),
+					MT6370_ITORCH_MASK, level);
+			if (ret)
+				goto unlock;
+		}
+	}
+
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN,
+				 enable_mask, val);
+	if (ret)
+		goto unlock;
+
+	priv->fled_torch_used = curr;
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int mt6370_flash_brightness_set(struct led_classdev_flash *fl_cdev,
+				       u32 brightness)
+{
+	/*
+	 * Due to the current spike when turning on flash,
+	 * let brightness be kept by the framework.
+	 * This empty function is used to
+	 * prevent led_classdev_flash register ops check failure.
+	 */
+	return 0;
+}
+
+static int _mt6370_flash_brightness_set(struct led_classdev_flash *fl_cdev,
+					u32 brightness)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	struct led_flash_setting *s = &fl_cdev->brightness;
+	u32 val = (brightness - s->min) / s->step;
+	int ret, i;
+
+	if (led->led_no == MT6370_LED_JOINT) {
+		int flevel[MT6370_MAX_LEDS];
+
+		flevel[0] = val / 2;
+		flevel[1] = val - flevel[0];
+		for (i = 0; i < MT6370_MAX_LEDS; i++) {
+			ret = regmap_update_bits(priv->regmap,
+						 MT6370_REG_FLEDISTRB(i),
+						 MT6370_ISTROBE_MASK, flevel[i]);
+			if (ret)
+				return ret;
+		}
+	} else {
+		return regmap_update_bits(priv->regmap,
+					  MT6370_REG_FLEDISTRB(led->led_no),
+					  MT6370_ISTROBE_MASK, val);
+	}
+
+	return 0;
+}
+
+static int mt6370_strobe_set(struct led_classdev_flash *fl_cdev, bool state)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	struct led_classdev *lcdev = &fl_cdev->led_cdev;
+	struct led_flash_setting *s = &fl_cdev->brightness;
+	u32 led_enable_mask = (led->led_no == MT6370_LED_JOINT) ?
+			      MT6370_FLCSEN_MASK_ALL :
+			      MT6370_FLCSEN_MASK(led->led_no);
+	u32 enable_mask = MT6370_STROBEN_MASK | led_enable_mask;
+	u32 val = state ? led_enable_mask : 0;
+	u32 prev = priv->fled_strobe_used, curr;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * Only one set of flash control logic,
+	 * use the flag to avoid torch is currently used
+	 */
+	if (priv->fled_torch_used) {
+		dev_warn(lcdev->dev, "Please disable torch first [0x%x]\n",
+				      priv->fled_torch_used);
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	if (state)
+		curr = prev | BIT(led->led_no);
+	else
+		curr = prev & ~BIT(led->led_no);
+
+	if (curr)
+		val |= MT6370_STROBEN_MASK;
+
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN, enable_mask,
+				 val);
+	if (ret) {
+		dev_err(lcdev->dev, "[%d] control current source %d fail\n",
+				     led->led_no, state);
+		goto unlock;
+	}
+
+	/*
+	 * If the flash needs to be on,
+	 * config the flash current ramping up to the setting value.
+	 * Else, always recover back to the minimum one.
+	 */
+	ret = _mt6370_flash_brightness_set(fl_cdev, state ? s->val : s->min);
+	if (ret)
+		goto unlock;
+
+	/*
+	 * For the flash to turn on/off, need to wait HW ramping up/down time
+	 * 5ms/500us to prevent the unexpected problem.
+	 */
+	if (!prev && curr)
+		usleep_range(5000, 6000);
+	else if (prev && !curr)
+		udelay(500);
+
+	priv->fled_strobe_used = curr;
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int mt6370_strobe_get(struct led_classdev_flash *fl_cdev, bool *state)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+
+	mutex_lock(&priv->lock);
+	*state = !!(priv->fled_strobe_used & BIT(led->led_no));
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int mt6370_timeout_set(struct led_classdev_flash *fl_cdev, u32 timeout)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	struct led_flash_setting *s = &fl_cdev->timeout;
+	u32 val = (timeout - s->min) / s->step;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_STRBTO,
+				 MT6370_STRBTO_MASK, val);
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int mt6370_fault_get(struct led_classdev_flash *fl_cdev, u32 *fault)
+{
+	struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+	struct mt6370_priv *priv = led->priv;
+	u16 fled_stat;
+	unsigned int chg_stat, strobe_timeout_mask, fled_short_mask;
+	u32 rfault = 0;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_read(priv->regmap, MT6370_REG_CHGSTAT2, &chg_stat);
+	if (ret)
+		goto unlock;
+
+	ret = regmap_raw_read(priv->regmap, MT6370_REG_FLEDSTAT1, &fled_stat,
+			      sizeof(fled_stat));
+	if (ret)
+		goto unlock;
+
+	switch (led->led_no) {
+	case MT6370_LED_FLASH1:
+		strobe_timeout_mask = MT6370_FLED1STRBTO_MASK;
+		fled_short_mask = MT6370_FLED1SHORT_MASK;
+		break;
+
+	case MT6370_LED_FLASH2:
+		strobe_timeout_mask = MT6370_FLED2STRBTO_MASK;
+		fled_short_mask = MT6370_FLED2SHORT_MASK;
+		break;
+
+	case MT6370_LED_JOINT:
+		strobe_timeout_mask = MT6370_FLED1STRBTO_MASK |
+				      MT6370_FLED2STRBTO_MASK;
+		fled_short_mask = MT6370_FLED1SHORT_MASK |
+				  MT6370_FLED2SHORT_MASK;
+	}
+
+	if (chg_stat & MT6370_FLEDCHGVINOVP_MASK)
+		rfault |= LED_FAULT_INPUT_VOLTAGE;
+
+	if (fled_stat & strobe_timeout_mask)
+		rfault |= LED_FAULT_TIMEOUT;
+
+	if (fled_stat & fled_short_mask)
+		rfault |= LED_FAULT_SHORT_CIRCUIT;
+
+	if (fled_stat & MT6370_FLEDLVF_MASK)
+		rfault |= LED_FAULT_UNDER_VOLTAGE;
+
+	*fault = rfault;
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static const struct led_flash_ops mt6370_flash_ops = {
+	.flash_brightness_set = mt6370_flash_brightness_set,
+	.strobe_set = mt6370_strobe_set,
+	.strobe_get = mt6370_strobe_get,
+	.timeout_set = mt6370_timeout_set,
+	.fault_get = mt6370_fault_get,
+};
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+static int mt6370_flash_external_strobe_set(struct v4l2_flash *v4l2_flash,
+					    bool enable)
+{
+	struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
+	struct mt6370_led *led = to_mt6370_led(flash, flash);
+	struct mt6370_priv *priv = led->priv;
+	u32 mask = (led->led_no == MT6370_LED_JOINT) ? MT6370_FLCSEN_MASK_ALL :
+		   MT6370_FLCSEN_MASK(led->led_no);
+	u32 val = enable ? mask : 0;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN, mask, val);
+	if (ret)
+		goto unlock;
+
+	if (enable)
+		priv->fled_strobe_used |= BIT(led->led_no);
+	else
+		priv->fled_strobe_used &= ~BIT(led->led_no);
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static const struct v4l2_flash_ops v4l2_flash_ops = {
+	.external_strobe_set = mt6370_flash_external_strobe_set,
+};
+
+static void mt6370_init_v4l2_flash_config(struct mt6370_led *led,
+					  struct v4l2_flash_config *config)
+{
+	struct led_classdev *lcdev;
+	struct led_flash_setting *s = &config->intensity;
+
+	lcdev = &led->flash.led_cdev;
+
+	s->min = MT6370_ITORCH_MIN_UA;
+	s->step = MT6370_ITORCH_STEP_UA;
+	s->val = s->max = s->min + (lcdev->max_brightness - 1) * s->step;
+
+	config->has_external_strobe = 1;
+	strscpy(config->dev_name, lcdev->dev->kobj.name,
+		sizeof(config->dev_name));
+
+	config->flash_faults = LED_FAULT_SHORT_CIRCUIT | LED_FAULT_TIMEOUT |
+			       LED_FAULT_INPUT_VOLTAGE |
+			       LED_FAULT_UNDER_VOLTAGE;
+}
+#else
+static const struct v4l2_flash_ops v4l2_flash_ops;
+static void mt6370_init_v4l2_flash_config(struct mt6370_led *led,
+					  struct v4l2_flash_config *config)
+{
+}
+#endif
+
+static void mt6370_v4l2_flash_release(void *v4l2_flash)
+{
+	v4l2_flash_release(v4l2_flash);
+}
+
+static int mt6370_led_register(struct device *parent, struct mt6370_led *led,
+				struct led_init_data *init_data)
+{
+	struct v4l2_flash_config v4l2_config = {0};
+	int ret;
+
+	ret = devm_led_classdev_flash_register_ext(parent, &led->flash,
+						   init_data);
+	if (ret)
+		return dev_err_probe(parent, ret,
+				     "Couldn't register flash %d\n", led->led_no);
+
+	mt6370_init_v4l2_flash_config(led, &v4l2_config);
+	led->v4l2_flash = v4l2_flash_init(parent, init_data->fwnode,
+					  &led->flash, &v4l2_flash_ops,
+					  &v4l2_config);
+	if (IS_ERR(led->v4l2_flash))
+		return dev_err_probe(parent, PTR_ERR(led->v4l2_flash),
+				     "Failed to register %d v4l2 sd\n", led->led_no);
+
+	return devm_add_action_or_reset(parent, mt6370_v4l2_flash_release,
+					led->v4l2_flash);
+}
+
+static u32 mt6370_clamp(u32 val, u32 min, u32 max, u32 step)
+{
+	u32 retval;
+
+	retval = clamp_val(val, min, max);
+	if (step > 1)
+		retval = rounddown(retval - min, step) + min;
+
+	return retval;
+}
+
+static int mt6370_init_flash_properties(struct mt6370_led *led,
+					struct led_init_data *init_data)
+{
+	struct led_classdev_flash *flash = &led->flash;
+	struct led_classdev *lcdev = &flash->led_cdev;
+	struct mt6370_priv *priv = led->priv;
+	struct led_flash_setting *s;
+	u32 sources[MT6370_MAX_LEDS];
+	u32 max_uA, val;
+	int i, ret, num;
+
+	num = fwnode_property_count_u32(init_data->fwnode, "led-sources");
+	if (num < 1 || num > MT6370_MAX_LEDS)
+		return dev_err_probe(priv->dev, -EINVAL,
+				     "Not specified or wrong number of led-sources\n");
+
+	ret = fwnode_property_read_u32_array(init_data->fwnode, "led-sources", sources, num);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < num; i++) {
+		if (sources[i] >= MT6370_MAX_LEDS)
+			return -EINVAL;
+		if (priv->leds_active & BIT(sources[i]))
+			return -EINVAL;
+		priv->leds_active |= BIT(sources[i]);
+
+	}
+	led->led_no = (num == MT6370_MAX_LEDS) ? MT6370_LED_JOINT :
+		       sources[0];
+
+	max_uA = (num == 2) ? MT6370_ITORCH_DOUBLE_MAX_UA : MT6370_ITORCH_MAX_UA;
+	ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp", &val);
+	if (ret) {
+		dev_warn(priv->dev,
+			 "Not specified led-max-microamp, config to the minimum\n");
+		val = MT6370_ITORCH_MIN_UA;
+	} else {
+		val = mt6370_clamp(val, MT6370_ITORCH_MIN_UA, max_uA,
+				  MT6370_ITORCH_STEP_UA);
+	}
+
+	lcdev->max_brightness = (val - MT6370_ITORCH_MIN_UA) /
+				MT6370_ITORCH_STEP_UA + 1;
+	lcdev->brightness_set_blocking = mt6370_torch_brightness_set;
+	lcdev->flags |= LED_DEV_CAP_FLASH;
+
+	max_uA = (num == 2) ? MT6370_ISTRB_DOUBLE_MAX_UA : MT6370_ISTRB_MAX_UA;
+	ret = fwnode_property_read_u32(init_data->fwnode, "flash-max-microamp", &val);
+	if (ret) {
+		dev_warn(priv->dev,
+		   "Not specified flash-max-microamp, config to the minimum\n");
+		val = MT6370_ISTRB_MIN_UA;
+	} else {
+		val = mt6370_clamp(val, MT6370_ISTRB_MIN_UA, max_uA,
+				  MT6370_ISTRB_STEP_UA);
+	}
+
+	s = &flash->brightness;
+	s->min = MT6370_ISTRB_MIN_UA;
+	s->step = MT6370_ISTRB_STEP_UA;
+	s->val = s->max = val;
+
+	/*
+	 * Always configure as min level when off to
+	 * prevent flash current spike
+	 */
+	ret = _mt6370_flash_brightness_set(flash, s->min);
+	if (ret)
+		return ret;
+
+	ret = fwnode_property_read_u32(init_data->fwnode,
+				       "flash-max-timeout-us", &val);
+	if (ret) {
+		dev_warn(priv->dev,
+			 "Not specified flash-max-timeout-us, config to the minimum\n");
+		val = MT6370_STRBTO_MIN_US;
+	} else {
+		val = mt6370_clamp(val, MT6370_STRBTO_MIN_US,
+				   MT6370_STRBTO_MAX_US, MT6370_STRBTO_STEP_US);
+	}
+
+	s = &flash->timeout;
+	s->min = MT6370_STRBTO_MIN_US;
+	s->step = MT6370_STRBTO_STEP_US;
+	s->val = s->max = val;
+
+	flash->ops = &mt6370_flash_ops;
+
+	return 0;
+}
+
+static int mt6370_init_common_properties(struct mt6370_led *led,
+					 struct led_init_data *init_data)
+{
+	const char * const states[] = { "off", "keep", "on" };
+	const char *str = states[STATE_OFF];
+	int ret;
+
+	fwnode_property_read_string(init_data->fwnode, "default-state", &str);
+	ret = match_string(states, ARRAY_SIZE(states), str);
+	if (ret >= 0)
+		led->default_state = ret;
+
+	return 0;
+}
+
+static int mt6370_led_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mt6370_priv *priv;
+	struct fwnode_handle *child;
+	size_t count;
+	int i = 0, ret;
+
+	count = device_get_child_node_count(dev);
+	if (!count || count > MT6370_MAX_LEDS)
+		return dev_err_probe(dev, -EINVAL,
+		       "No child node or node count over max led number %zu\n", count);
+
+	priv = devm_kzalloc(dev, struct_size(priv, leds, count), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->leds_count = count;
+	priv->dev = dev;
+	mutex_init(&priv->lock);
+
+	priv->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!priv->regmap)
+		return dev_err_probe(dev, -ENODEV, "Failed to get parent regmap\n");
+
+	device_for_each_child_node(dev, child) {
+		struct mt6370_led *led = priv->leds + i;
+		struct led_init_data init_data = { .fwnode = child, };
+
+		led->priv = priv;
+		ret = mt6370_init_common_properties(led, &init_data);
+		if (ret)
+			return ret;
+
+		ret = mt6370_init_flash_properties(led, &init_data);
+
+		if (ret)
+			return ret;
+
+		ret = mt6370_led_register(dev, led, &init_data);
+		if (ret)
+			return ret;
+
+		i++;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id mt6370_led_of_id[] = {
+	{ .compatible = "mediatek,mt6370-flashlight" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mt6370_led_of_id);
+
+static struct platform_driver mt6370_led_driver = {
+	.driver = {
+		.name = "mt6370-flashlight",
+		.of_match_table = mt6370_led_of_id,
+	},
+	.probe = mt6370_led_probe,
+};
+module_platform_driver(mt6370_led_driver);
+
+MODULE_AUTHOR("Alice Chen <alice_chen@richtek.com>");
+MODULE_DESCRIPTION("MT6370 FLASH LED Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-07-22 10:26 UTC|newest]

Thread overview: 154+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-22 10:23 [PATCH v6 00/13] Add MediaTek MT6370 PMIC support ChiaEn Wu
2022-07-22 10:23 ` ChiaEn Wu
2022-07-22 10:23 ` ChiaEn Wu
2022-07-22 10:23 ` [PATCH v6 01/13] dt-bindings: usb: Add MediaTek MT6370 TCPC ChiaEn Wu
2022-07-22 10:23   ` ChiaEn Wu
2022-07-22 10:23   ` ChiaEn Wu
2022-07-22 10:23 ` [PATCH v6 02/13] dt-bindings: power: supply: Add MediaTek MT6370 Charger ChiaEn Wu
2022-07-22 10:23   ` ChiaEn Wu
2022-07-22 10:23   ` ChiaEn Wu
2022-07-22 10:23 ` [PATCH v6 03/13] dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator ChiaEn Wu
2022-07-22 10:23   ` ChiaEn Wu
2022-07-22 10:23   ` ChiaEn Wu
2022-07-22 10:23 ` [PATCH v6 04/13] dt-bindings: leds: Add MediaTek MT6370 flashlight ChiaEn Wu
2022-07-22 10:23   ` ChiaEn Wu
2022-07-22 10:23   ` ChiaEn Wu
2022-07-30 21:30   ` Pavel Machek
2022-07-30 21:30     ` Pavel Machek
2022-07-30 21:30     ` Pavel Machek
2022-07-22 10:23 ` [PATCH v6 05/13] dt-bindings: backlight: Add MediaTek MT6370 backlight ChiaEn Wu
2022-07-22 10:23   ` ChiaEn Wu
2022-07-22 10:23   ` ChiaEn Wu
2022-08-01  6:47   ` ChiaEn Wu
2022-08-01  6:47     ` ChiaEn Wu
2022-07-22 10:24 ` [PATCH v6 06/13] dt-bindings: mfd: Add MediaTek MT6370 ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-22 10:24 ` [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-25  7:59   ` Andy Shevchenko
2022-07-25  7:59     ` Andy Shevchenko
2022-07-25  7:59     ` Andy Shevchenko
2022-07-25  8:29     ` ChiaEn Wu
2022-07-25  8:29       ` ChiaEn Wu
2022-07-25  8:29       ` ChiaEn Wu
2022-07-25  8:43       ` Andy Shevchenko
2022-07-25  8:43         ` Andy Shevchenko
2022-07-25  8:43         ` Andy Shevchenko
2022-07-25  9:06         ` ChiaEn Wu
2022-07-25  9:06           ` ChiaEn Wu
2022-07-25  9:06           ` ChiaEn Wu
2022-07-25  9:09           ` Andy Shevchenko
2022-07-25  9:09             ` Andy Shevchenko
2022-07-25  9:09             ` Andy Shevchenko
2022-07-22 10:24 ` [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-22 14:19   ` Guenter Roeck
2022-07-22 14:19     ` Guenter Roeck
2022-07-22 14:19     ` Guenter Roeck
2022-07-25  7:06   ` Chunfeng Yun
2022-07-25  7:06     ` Chunfeng Yun
2022-07-25  7:06     ` Chunfeng Yun
2022-07-25  7:17     ` ChiaEn Wu
2022-07-25  7:17       ` ChiaEn Wu
2022-07-25  7:17       ` ChiaEn Wu
2022-07-25  8:03   ` Andy Shevchenko
2022-07-25  8:03     ` Andy Shevchenko
2022-07-25  8:03     ` Andy Shevchenko
2022-07-22 10:24 ` [PATCH v6 09/13] iio: adc: mt6370: Add MediaTek MT6370 support ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-25  8:10   ` Andy Shevchenko
2022-07-25  8:10     ` Andy Shevchenko
2022-07-25  8:10     ` Andy Shevchenko
2022-07-22 10:24 ` [PATCH v6 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-25  8:25   ` Andy Shevchenko
2022-07-25  8:25     ` Andy Shevchenko
2022-07-25  8:25     ` Andy Shevchenko
2022-07-22 10:24 ` [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-22 10:52   ` AngeloGioacchino Del Regno
2022-07-22 10:52     ` AngeloGioacchino Del Regno
2022-07-22 10:52     ` AngeloGioacchino Del Regno
2022-07-25  8:40   ` Andy Shevchenko
2022-07-25  8:40     ` Andy Shevchenko
2022-07-25  8:40     ` Andy Shevchenko
2022-07-26 11:45     ` ChiaEn Wu
2022-07-26 11:45       ` ChiaEn Wu
2022-07-26 11:45       ` ChiaEn Wu
2022-07-26 12:17       ` Andy Shevchenko
2022-07-26 12:17         ` Andy Shevchenko
2022-07-26 12:17         ` Andy Shevchenko
2022-07-27  7:36         ` ChiaEn Wu
2022-07-27  7:36           ` ChiaEn Wu
2022-07-27  7:36           ` ChiaEn Wu
2022-07-27 10:03           ` Andy Shevchenko
2022-07-27 10:03             ` Andy Shevchenko
2022-07-27 10:03             ` Andy Shevchenko
2022-07-30 21:39   ` Pavel Machek
2022-07-30 21:39     ` Pavel Machek
2022-07-30 21:39     ` Pavel Machek
2022-08-01  7:55     ` szuni chen
2022-08-01  7:55       ` szuni chen
2022-07-22 10:24 ` ChiaEn Wu [this message]
2022-07-22 10:24   ` [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-22 10:48   ` AngeloGioacchino Del Regno
2022-07-22 10:48     ` AngeloGioacchino Del Regno
2022-07-22 10:48     ` AngeloGioacchino Del Regno
2022-07-25  8:51   ` Andy Shevchenko
2022-07-25  8:51     ` Andy Shevchenko
2022-07-25  8:51     ` Andy Shevchenko
2022-07-29  6:17     ` szuni chen
2022-07-29  6:17       ` szuni chen
2022-07-29  6:17       ` szuni chen
2022-07-29 10:34       ` Andy Shevchenko
2022-07-29 10:34         ` Andy Shevchenko
2022-07-29 10:34         ` Andy Shevchenko
2022-07-25  8:55   ` Andy Shevchenko
2022-07-25  8:55     ` Andy Shevchenko
2022-07-25  8:55     ` Andy Shevchenko
2022-07-26  4:15     ` szuni chen
2022-07-26  4:15       ` szuni chen
2022-07-26  4:15       ` szuni chen
2022-07-26  6:10       ` Andy Shevchenko
2022-07-26  6:10         ` Andy Shevchenko
2022-07-26  6:10         ` Andy Shevchenko
2022-07-30 21:42   ` Pavel Machek
2022-07-30 21:42     ` Pavel Machek
2022-07-30 21:42     ` Pavel Machek
2022-08-04  9:53     ` Alice Chen
2022-08-04  9:53       ` Alice Chen
2022-08-04  9:53       ` Alice Chen
2022-07-22 10:24 ` [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-22 10:24   ` ChiaEn Wu
2022-07-25  9:07   ` Andy Shevchenko
2022-07-25  9:07     ` Andy Shevchenko
2022-07-25  9:07     ` Andy Shevchenko
2022-07-25 10:31   ` Daniel Thompson
2022-07-25 10:31     ` Daniel Thompson
2022-07-25 10:31     ` Daniel Thompson
2022-07-26  2:20     ` ChiaEn Wu
2022-07-26  2:20       ` ChiaEn Wu
2022-07-26  2:20       ` ChiaEn Wu
2022-07-26  9:30       ` Daniel Thompson
2022-07-26  9:30         ` Daniel Thompson
2022-07-26  9:30         ` Daniel Thompson
2022-07-26 11:28         ` ChiaEn Wu
2022-07-26 11:28           ` ChiaEn Wu
2022-07-26 11:28           ` ChiaEn Wu
2022-07-26 11:59           ` Daniel Thompson
2022-07-26 11:59             ` Daniel Thompson
2022-07-26 11:59             ` Daniel Thompson
2022-07-27  6:24             ` ChiaEn Wu
2022-07-27  6:24               ` ChiaEn Wu
2022-07-27  6:24               ` ChiaEn Wu
2022-07-28 11:31               ` Daniel Thompson
2022-07-28 11:31                 ` Daniel Thompson
2022-07-28 11:31                 ` Daniel Thompson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220722102407.2205-13-peterwu.pub@gmail.com \
    --to=peterwu.pub@gmail.com \
    --cc=alice_chen@richtek.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=broonie@kernel.org \
    --cc=chiaen_wu@richtek.com \
    --cc=chunfeng.yun@mediatek.com \
    --cc=cy_huang@richtek.com \
    --cc=daniel.thompson@linaro.org \
    --cc=deller@gmx.de \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=jic23@kernel.org \
    --cc=jingoohan1@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=matthias.bgg@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    --cc=szunichen@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.