All of lore.kernel.org
 help / color / mirror / Atom feed
From: maxime@cerno.tech
To: Karol Herbst <kherbst@redhat.com>, Emma Anholt <emma@anholt.net>,
	Ben Skeggs <bskeggs@redhat.com>, Chen-Yu Tsai <wens@csie.org>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Jani Nikula <jani.nikula@linux.intel.com>,
	Daniel Vetter <daniel@ffwll.ch>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
	Samuel Holland <samuel@sholland.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	David Airlie <airlied@linux.ie>,
	Maxime Ripard <mripard@kernel.org>,
	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	Lyude Paul <lyude@redhat.com>
Cc: linux-sunxi@lists.linux.dev, Maxime Ripard <maxime@cerno.tech>,
	intel-gfx@lists.freedesktop.org,
	Phil Elwell <phil@raspberrypi.com>,
	linux-arm-kernel@lists.infradead.org,
	nouveau@lists.freedesktop.org,
	Hans de Goede <hdegoede@redhat.com>,
	Dom Cobley <dom@raspberrypi.com>,
	Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>,
	dri-devel@lists.freedesktop.org,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	linux-kernel@vger.kernel.org, Noralf Trønnes <noralf@tronnes.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH v6 22/23] drm/vc4: vec: Add support for more analog TV standards
Date: Wed, 26 Oct 2022 17:33:41 +0200	[thread overview]
Message-ID: <20220728-rpi-analog-tv-properties-v6-22-e7792734108f@cerno.tech> (raw)
In-Reply-To: <20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech>

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):

- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
  4.43361875 MHz (the PAL subcarrier frequency). Never used for
  broadcasting, but sometimes used as a hack to play NTSC content in PAL
  regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
  3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
  and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
  frequency. Another non-standard, non-broadcast mode, used in similar
  contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
  been broadcast in Eastern Europe and various parts of Africa and Asia.
  Uses the same 576i50 timings as PAL.

Also added some comments explaining color subcarrier frequency
registers.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Support PAL60 again
---
 drivers/gpu/drm/vc4/vc4_vec.c | 111 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 107 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 1dda451c8def..d82aef168075 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -46,6 +46,7 @@
 #define VEC_CONFIG0_YDEL(x)		((x) << 26)
 #define VEC_CONFIG0_CDEL_MASK		GENMASK(25, 24)
 #define VEC_CONFIG0_CDEL(x)		((x) << 24)
+#define VEC_CONFIG0_SECAM_STD		BIT(21)
 #define VEC_CONFIG0_PBPR_FIL		BIT(18)
 #define VEC_CONFIG0_CHROMA_GAIN_MASK	GENMASK(17, 16)
 #define VEC_CONFIG0_CHROMA_GAIN_UNITY	(0 << 16)
@@ -76,6 +77,27 @@
 #define VEC_SOFT_RESET			0x10c
 #define VEC_CLMP0_START			0x144
 #define VEC_CLMP0_END			0x148
+
+/*
+ * These set the color subcarrier frequency
+ * if VEC_CONFIG1_CUSTOM_FREQ is enabled.
+ *
+ * VEC_FREQ1_0 contains the most significant 16-bit half-word,
+ * VEC_FREQ3_2 contains the least significant 16-bit half-word.
+ * 0x80000000 seems to be equivalent to the pixel clock
+ * (which itself is the VEC clock divided by 8).
+ *
+ * Reference values (with the default pixel clock of 13.5 MHz):
+ *
+ * NTSC  (3579545.[45] Hz)     - 0x21F07C1F
+ * PAL   (4433618.75 Hz)       - 0x2A098ACB
+ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3
+ * PAL-N (3582056.25 Hz)       - 0x21F69446
+ *
+ * NOTE: For SECAM, it is used as the Dr center frequency,
+ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not;
+ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72.
+ */
 #define VEC_FREQ3_2			0x180
 #define VEC_FREQ1_0			0x184
 
@@ -118,6 +140,14 @@
 
 #define VEC_INTERRUPT_CONTROL		0x190
 #define VEC_INTERRUPT_STATUS		0x194
+
+/*
+ * Db center frequency for SECAM; the clock for this is the same as for
+ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency.
+ *
+ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13.
+ * That is also the default value, so no need to set it explicitly.
+ */
 #define VEC_FCW_SECAM_B			0x198
 #define VEC_SECAM_GAIN_VAL		0x19c
 
@@ -197,10 +227,15 @@ enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC_J,
 	VC4_VEC_TV_MODE_PAL,
 	VC4_VEC_TV_MODE_PAL_M,
+	VC4_VEC_TV_MODE_NTSC_443,
+	VC4_VEC_TV_MODE_PAL_60,
+	VC4_VEC_TV_MODE_PAL_N,
+	VC4_VEC_TV_MODE_SECAM,
 };
 
 struct vc4_vec_tv_mode {
 	unsigned int mode;
+	u16 expected_htotal;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -236,35 +271,68 @@ static const struct debugfs_reg32 vec_regs[] = {
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_443,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_NTSC_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC_J,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		/* PAL-60 */
+		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_PAL_M_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL_M,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_N,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_PAL_N_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	{
+		.mode = DRM_MODE_TV_MODE_SECAM,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_SECAM_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+		.custom_freq = 0x29c71c72,
+	},
 };
 
 static inline const struct vc4_vec_tv_mode *
-vc4_vec_tv_mode_lookup(unsigned int mode)
+vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
 		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
 
-		if (tv_mode->mode == mode)
+		if (tv_mode->mode == mode &&
+		    tv_mode->expected_htotal == htotal)
 			return tv_mode;
 	}
 
@@ -273,9 +341,13 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
 
 static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
 	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
 	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
 	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_60, "PAL-60", },
 	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+	{ VC4_VEC_TV_MODE_PAL_N, "PAL-N", },
+	{ VC4_VEC_TV_MODE_SECAM, "SECAM", },
 };
 
 static enum drm_connector_status
@@ -306,11 +378,16 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
 		break;
 
+	case VC4_VEC_TV_MODE_NTSC_443:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_443;
+		break;
+
 	case VC4_VEC_TV_MODE_NTSC_J:
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
 		break;
 
 	case VC4_VEC_TV_MODE_PAL:
+	case VC4_VEC_TV_MODE_PAL_60:
 		state->tv.mode = DRM_MODE_TV_MODE_PAL;
 		break;
 
@@ -318,6 +395,14 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
 		break;
 
+	case VC4_VEC_TV_MODE_PAL_N:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_N;
+		break;
+
+	case VC4_VEC_TV_MODE_SECAM:
+		state->tv.mode = DRM_MODE_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -341,6 +426,10 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_NTSC;
 		break;
 
+	case DRM_MODE_TV_MODE_NTSC_443:
+		*val = VC4_VEC_TV_MODE_NTSC_443;
+		break;
+
 	case DRM_MODE_TV_MODE_NTSC_J:
 		*val = VC4_VEC_TV_MODE_NTSC_J;
 		break;
@@ -353,6 +442,14 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_PAL_M;
 		break;
 
+	case DRM_MODE_TV_MODE_PAL_N:
+		*val = VC4_VEC_TV_MODE_PAL_N;
+		break;
+
+	case DRM_MODE_TV_MODE_SECAM:
+		*val = VC4_VEC_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -448,13 +545,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_display_mode *adjusted_mode =
+		&encoder->crtc->state->adjusted_mode;
 	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode,
+					 adjusted_mode->htotal);
 	if (!tv_mode)
 		goto err_dev_exit;
 
@@ -643,9 +743,12 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 
 	ret = drm_mode_create_tv_properties(drm,
 					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_443) |
 					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
 					    BIT(DRM_MODE_TV_MODE_PAL) |
-					    BIT(DRM_MODE_TV_MODE_PAL_M));
+					    BIT(DRM_MODE_TV_MODE_PAL_M) |
+					    BIT(DRM_MODE_TV_MODE_PAL_N) |
+					    BIT(DRM_MODE_TV_MODE_SECAM));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

WARNING: multiple messages have this Message-ID (diff)
From: maxime@cerno.tech
To: Karol Herbst <kherbst@redhat.com>, Emma Anholt <emma@anholt.net>,
	Ben Skeggs <bskeggs@redhat.com>,  Chen-Yu Tsai <wens@csie.org>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Jani Nikula <jani.nikula@linux.intel.com>,
	 Daniel Vetter <daniel@ffwll.ch>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
	Samuel Holland <samuel@sholland.org>,
	 Jernej Skrabec <jernej.skrabec@gmail.com>,
	David Airlie <airlied@linux.ie>,
	Maxime Ripard <mripard@kernel.org>,
	 Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	Lyude Paul <lyude@redhat.com>
Cc: Dom Cobley <dom@raspberrypi.com>,
	nouveau@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-sunxi@lists.linux.dev, Hans de Goede <hdegoede@redhat.com>,
	Noralf Trønnes <noralf@tronnes.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Maxime Ripard <maxime@cerno.tech>,
	Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>,
	Phil Elwell <phil@raspberrypi.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [Nouveau] [PATCH v6 22/23] drm/vc4: vec: Add support for more analog TV standards
Date: Wed, 26 Oct 2022 17:33:41 +0200	[thread overview]
Message-ID: <20220728-rpi-analog-tv-properties-v6-22-e7792734108f@cerno.tech> (raw)
In-Reply-To: <20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech>

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):

- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
  4.43361875 MHz (the PAL subcarrier frequency). Never used for
  broadcasting, but sometimes used as a hack to play NTSC content in PAL
  regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
  3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
  and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
  frequency. Another non-standard, non-broadcast mode, used in similar
  contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
  been broadcast in Eastern Europe and various parts of Africa and Asia.
  Uses the same 576i50 timings as PAL.

Also added some comments explaining color subcarrier frequency
registers.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Support PAL60 again
---
 drivers/gpu/drm/vc4/vc4_vec.c | 111 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 107 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 1dda451c8def..d82aef168075 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -46,6 +46,7 @@
 #define VEC_CONFIG0_YDEL(x)		((x) << 26)
 #define VEC_CONFIG0_CDEL_MASK		GENMASK(25, 24)
 #define VEC_CONFIG0_CDEL(x)		((x) << 24)
+#define VEC_CONFIG0_SECAM_STD		BIT(21)
 #define VEC_CONFIG0_PBPR_FIL		BIT(18)
 #define VEC_CONFIG0_CHROMA_GAIN_MASK	GENMASK(17, 16)
 #define VEC_CONFIG0_CHROMA_GAIN_UNITY	(0 << 16)
@@ -76,6 +77,27 @@
 #define VEC_SOFT_RESET			0x10c
 #define VEC_CLMP0_START			0x144
 #define VEC_CLMP0_END			0x148
+
+/*
+ * These set the color subcarrier frequency
+ * if VEC_CONFIG1_CUSTOM_FREQ is enabled.
+ *
+ * VEC_FREQ1_0 contains the most significant 16-bit half-word,
+ * VEC_FREQ3_2 contains the least significant 16-bit half-word.
+ * 0x80000000 seems to be equivalent to the pixel clock
+ * (which itself is the VEC clock divided by 8).
+ *
+ * Reference values (with the default pixel clock of 13.5 MHz):
+ *
+ * NTSC  (3579545.[45] Hz)     - 0x21F07C1F
+ * PAL   (4433618.75 Hz)       - 0x2A098ACB
+ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3
+ * PAL-N (3582056.25 Hz)       - 0x21F69446
+ *
+ * NOTE: For SECAM, it is used as the Dr center frequency,
+ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not;
+ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72.
+ */
 #define VEC_FREQ3_2			0x180
 #define VEC_FREQ1_0			0x184
 
@@ -118,6 +140,14 @@
 
 #define VEC_INTERRUPT_CONTROL		0x190
 #define VEC_INTERRUPT_STATUS		0x194
+
+/*
+ * Db center frequency for SECAM; the clock for this is the same as for
+ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency.
+ *
+ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13.
+ * That is also the default value, so no need to set it explicitly.
+ */
 #define VEC_FCW_SECAM_B			0x198
 #define VEC_SECAM_GAIN_VAL		0x19c
 
@@ -197,10 +227,15 @@ enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC_J,
 	VC4_VEC_TV_MODE_PAL,
 	VC4_VEC_TV_MODE_PAL_M,
+	VC4_VEC_TV_MODE_NTSC_443,
+	VC4_VEC_TV_MODE_PAL_60,
+	VC4_VEC_TV_MODE_PAL_N,
+	VC4_VEC_TV_MODE_SECAM,
 };
 
 struct vc4_vec_tv_mode {
 	unsigned int mode;
+	u16 expected_htotal;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -236,35 +271,68 @@ static const struct debugfs_reg32 vec_regs[] = {
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_443,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_NTSC_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC_J,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		/* PAL-60 */
+		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_PAL_M_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL_M,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_N,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_PAL_N_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	{
+		.mode = DRM_MODE_TV_MODE_SECAM,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_SECAM_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+		.custom_freq = 0x29c71c72,
+	},
 };
 
 static inline const struct vc4_vec_tv_mode *
-vc4_vec_tv_mode_lookup(unsigned int mode)
+vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
 		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
 
-		if (tv_mode->mode == mode)
+		if (tv_mode->mode == mode &&
+		    tv_mode->expected_htotal == htotal)
 			return tv_mode;
 	}
 
@@ -273,9 +341,13 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
 
 static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
 	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
 	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
 	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_60, "PAL-60", },
 	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+	{ VC4_VEC_TV_MODE_PAL_N, "PAL-N", },
+	{ VC4_VEC_TV_MODE_SECAM, "SECAM", },
 };
 
 static enum drm_connector_status
@@ -306,11 +378,16 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
 		break;
 
+	case VC4_VEC_TV_MODE_NTSC_443:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_443;
+		break;
+
 	case VC4_VEC_TV_MODE_NTSC_J:
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
 		break;
 
 	case VC4_VEC_TV_MODE_PAL:
+	case VC4_VEC_TV_MODE_PAL_60:
 		state->tv.mode = DRM_MODE_TV_MODE_PAL;
 		break;
 
@@ -318,6 +395,14 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
 		break;
 
+	case VC4_VEC_TV_MODE_PAL_N:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_N;
+		break;
+
+	case VC4_VEC_TV_MODE_SECAM:
+		state->tv.mode = DRM_MODE_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -341,6 +426,10 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_NTSC;
 		break;
 
+	case DRM_MODE_TV_MODE_NTSC_443:
+		*val = VC4_VEC_TV_MODE_NTSC_443;
+		break;
+
 	case DRM_MODE_TV_MODE_NTSC_J:
 		*val = VC4_VEC_TV_MODE_NTSC_J;
 		break;
@@ -353,6 +442,14 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_PAL_M;
 		break;
 
+	case DRM_MODE_TV_MODE_PAL_N:
+		*val = VC4_VEC_TV_MODE_PAL_N;
+		break;
+
+	case DRM_MODE_TV_MODE_SECAM:
+		*val = VC4_VEC_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -448,13 +545,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_display_mode *adjusted_mode =
+		&encoder->crtc->state->adjusted_mode;
 	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode,
+					 adjusted_mode->htotal);
 	if (!tv_mode)
 		goto err_dev_exit;
 
@@ -643,9 +743,12 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 
 	ret = drm_mode_create_tv_properties(drm,
 					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_443) |
 					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
 					    BIT(DRM_MODE_TV_MODE_PAL) |
-					    BIT(DRM_MODE_TV_MODE_PAL_M));
+					    BIT(DRM_MODE_TV_MODE_PAL_M) |
+					    BIT(DRM_MODE_TV_MODE_PAL_N) |
+					    BIT(DRM_MODE_TV_MODE_SECAM));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

WARNING: multiple messages have this Message-ID (diff)
From: maxime@cerno.tech
To: Karol Herbst <kherbst@redhat.com>, Emma Anholt <emma@anholt.net>,
	Ben Skeggs <bskeggs@redhat.com>,  Chen-Yu Tsai <wens@csie.org>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Jani Nikula <jani.nikula@linux.intel.com>,
	 Daniel Vetter <daniel@ffwll.ch>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
	Samuel Holland <samuel@sholland.org>,
	 Jernej Skrabec <jernej.skrabec@gmail.com>,
	David Airlie <airlied@linux.ie>,
	Maxime Ripard <mripard@kernel.org>,
	 Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	Lyude Paul <lyude@redhat.com>
Cc: Dom Cobley <dom@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	nouveau@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-sunxi@lists.linux.dev, Hans de Goede <hdegoede@redhat.com>,
	Noralf Trønnes <noralf@tronnes.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Maxime Ripard <maxime@cerno.tech>,
	Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>,
	Phil Elwell <phil@raspberrypi.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 22/23] drm/vc4: vec: Add support for more analog TV standards
Date: Wed, 26 Oct 2022 17:33:41 +0200	[thread overview]
Message-ID: <20220728-rpi-analog-tv-properties-v6-22-e7792734108f@cerno.tech> (raw)
In-Reply-To: <20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech>

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):

- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
  4.43361875 MHz (the PAL subcarrier frequency). Never used for
  broadcasting, but sometimes used as a hack to play NTSC content in PAL
  regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
  3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
  and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
  frequency. Another non-standard, non-broadcast mode, used in similar
  contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
  been broadcast in Eastern Europe and various parts of Africa and Asia.
  Uses the same 576i50 timings as PAL.

Also added some comments explaining color subcarrier frequency
registers.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Support PAL60 again
---
 drivers/gpu/drm/vc4/vc4_vec.c | 111 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 107 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 1dda451c8def..d82aef168075 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -46,6 +46,7 @@
 #define VEC_CONFIG0_YDEL(x)		((x) << 26)
 #define VEC_CONFIG0_CDEL_MASK		GENMASK(25, 24)
 #define VEC_CONFIG0_CDEL(x)		((x) << 24)
+#define VEC_CONFIG0_SECAM_STD		BIT(21)
 #define VEC_CONFIG0_PBPR_FIL		BIT(18)
 #define VEC_CONFIG0_CHROMA_GAIN_MASK	GENMASK(17, 16)
 #define VEC_CONFIG0_CHROMA_GAIN_UNITY	(0 << 16)
@@ -76,6 +77,27 @@
 #define VEC_SOFT_RESET			0x10c
 #define VEC_CLMP0_START			0x144
 #define VEC_CLMP0_END			0x148
+
+/*
+ * These set the color subcarrier frequency
+ * if VEC_CONFIG1_CUSTOM_FREQ is enabled.
+ *
+ * VEC_FREQ1_0 contains the most significant 16-bit half-word,
+ * VEC_FREQ3_2 contains the least significant 16-bit half-word.
+ * 0x80000000 seems to be equivalent to the pixel clock
+ * (which itself is the VEC clock divided by 8).
+ *
+ * Reference values (with the default pixel clock of 13.5 MHz):
+ *
+ * NTSC  (3579545.[45] Hz)     - 0x21F07C1F
+ * PAL   (4433618.75 Hz)       - 0x2A098ACB
+ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3
+ * PAL-N (3582056.25 Hz)       - 0x21F69446
+ *
+ * NOTE: For SECAM, it is used as the Dr center frequency,
+ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not;
+ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72.
+ */
 #define VEC_FREQ3_2			0x180
 #define VEC_FREQ1_0			0x184
 
@@ -118,6 +140,14 @@
 
 #define VEC_INTERRUPT_CONTROL		0x190
 #define VEC_INTERRUPT_STATUS		0x194
+
+/*
+ * Db center frequency for SECAM; the clock for this is the same as for
+ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency.
+ *
+ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13.
+ * That is also the default value, so no need to set it explicitly.
+ */
 #define VEC_FCW_SECAM_B			0x198
 #define VEC_SECAM_GAIN_VAL		0x19c
 
@@ -197,10 +227,15 @@ enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC_J,
 	VC4_VEC_TV_MODE_PAL,
 	VC4_VEC_TV_MODE_PAL_M,
+	VC4_VEC_TV_MODE_NTSC_443,
+	VC4_VEC_TV_MODE_PAL_60,
+	VC4_VEC_TV_MODE_PAL_N,
+	VC4_VEC_TV_MODE_SECAM,
 };
 
 struct vc4_vec_tv_mode {
 	unsigned int mode;
+	u16 expected_htotal;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -236,35 +271,68 @@ static const struct debugfs_reg32 vec_regs[] = {
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_443,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_NTSC_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC_J,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		/* PAL-60 */
+		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_PAL_M_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL_M,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_N,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_PAL_N_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	{
+		.mode = DRM_MODE_TV_MODE_SECAM,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_SECAM_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+		.custom_freq = 0x29c71c72,
+	},
 };
 
 static inline const struct vc4_vec_tv_mode *
-vc4_vec_tv_mode_lookup(unsigned int mode)
+vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
 		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
 
-		if (tv_mode->mode == mode)
+		if (tv_mode->mode == mode &&
+		    tv_mode->expected_htotal == htotal)
 			return tv_mode;
 	}
 
@@ -273,9 +341,13 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
 
 static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
 	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
 	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
 	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_60, "PAL-60", },
 	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+	{ VC4_VEC_TV_MODE_PAL_N, "PAL-N", },
+	{ VC4_VEC_TV_MODE_SECAM, "SECAM", },
 };
 
 static enum drm_connector_status
@@ -306,11 +378,16 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
 		break;
 
+	case VC4_VEC_TV_MODE_NTSC_443:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_443;
+		break;
+
 	case VC4_VEC_TV_MODE_NTSC_J:
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
 		break;
 
 	case VC4_VEC_TV_MODE_PAL:
+	case VC4_VEC_TV_MODE_PAL_60:
 		state->tv.mode = DRM_MODE_TV_MODE_PAL;
 		break;
 
@@ -318,6 +395,14 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
 		break;
 
+	case VC4_VEC_TV_MODE_PAL_N:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_N;
+		break;
+
+	case VC4_VEC_TV_MODE_SECAM:
+		state->tv.mode = DRM_MODE_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -341,6 +426,10 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_NTSC;
 		break;
 
+	case DRM_MODE_TV_MODE_NTSC_443:
+		*val = VC4_VEC_TV_MODE_NTSC_443;
+		break;
+
 	case DRM_MODE_TV_MODE_NTSC_J:
 		*val = VC4_VEC_TV_MODE_NTSC_J;
 		break;
@@ -353,6 +442,14 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_PAL_M;
 		break;
 
+	case DRM_MODE_TV_MODE_PAL_N:
+		*val = VC4_VEC_TV_MODE_PAL_N;
+		break;
+
+	case DRM_MODE_TV_MODE_SECAM:
+		*val = VC4_VEC_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -448,13 +545,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_display_mode *adjusted_mode =
+		&encoder->crtc->state->adjusted_mode;
 	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode,
+					 adjusted_mode->htotal);
 	if (!tv_mode)
 		goto err_dev_exit;
 
@@ -643,9 +743,12 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 
 	ret = drm_mode_create_tv_properties(drm,
 					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_443) |
 					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
 					    BIT(DRM_MODE_TV_MODE_PAL) |
-					    BIT(DRM_MODE_TV_MODE_PAL_M));
+					    BIT(DRM_MODE_TV_MODE_PAL_M) |
+					    BIT(DRM_MODE_TV_MODE_PAL_N) |
+					    BIT(DRM_MODE_TV_MODE_SECAM));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

WARNING: multiple messages have this Message-ID (diff)
From: maxime@cerno.tech
To: Karol Herbst <kherbst@redhat.com>, Emma Anholt <emma@anholt.net>,
	Ben Skeggs <bskeggs@redhat.com>,  Chen-Yu Tsai <wens@csie.org>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Jani Nikula <jani.nikula@linux.intel.com>,
	 Daniel Vetter <daniel@ffwll.ch>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
	Samuel Holland <samuel@sholland.org>,
	 Jernej Skrabec <jernej.skrabec@gmail.com>,
	David Airlie <airlied@linux.ie>,
	Maxime Ripard <mripard@kernel.org>,
	 Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	Lyude Paul <lyude@redhat.com>
Cc: Dom Cobley <dom@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	nouveau@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-sunxi@lists.linux.dev, Hans de Goede <hdegoede@redhat.com>,
	Noralf Trønnes <noralf@tronnes.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Maxime Ripard <maxime@cerno.tech>,
	Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>,
	Phil Elwell <phil@raspberrypi.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [Intel-gfx] [PATCH v6 22/23] drm/vc4: vec: Add support for more analog TV standards
Date: Wed, 26 Oct 2022 17:33:41 +0200	[thread overview]
Message-ID: <20220728-rpi-analog-tv-properties-v6-22-e7792734108f@cerno.tech> (raw)
In-Reply-To: <20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech>

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):

- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
  4.43361875 MHz (the PAL subcarrier frequency). Never used for
  broadcasting, but sometimes used as a hack to play NTSC content in PAL
  regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
  3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
  and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
  frequency. Another non-standard, non-broadcast mode, used in similar
  contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
  been broadcast in Eastern Europe and various parts of Africa and Asia.
  Uses the same 576i50 timings as PAL.

Also added some comments explaining color subcarrier frequency
registers.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Support PAL60 again
---
 drivers/gpu/drm/vc4/vc4_vec.c | 111 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 107 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 1dda451c8def..d82aef168075 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -46,6 +46,7 @@
 #define VEC_CONFIG0_YDEL(x)		((x) << 26)
 #define VEC_CONFIG0_CDEL_MASK		GENMASK(25, 24)
 #define VEC_CONFIG0_CDEL(x)		((x) << 24)
+#define VEC_CONFIG0_SECAM_STD		BIT(21)
 #define VEC_CONFIG0_PBPR_FIL		BIT(18)
 #define VEC_CONFIG0_CHROMA_GAIN_MASK	GENMASK(17, 16)
 #define VEC_CONFIG0_CHROMA_GAIN_UNITY	(0 << 16)
@@ -76,6 +77,27 @@
 #define VEC_SOFT_RESET			0x10c
 #define VEC_CLMP0_START			0x144
 #define VEC_CLMP0_END			0x148
+
+/*
+ * These set the color subcarrier frequency
+ * if VEC_CONFIG1_CUSTOM_FREQ is enabled.
+ *
+ * VEC_FREQ1_0 contains the most significant 16-bit half-word,
+ * VEC_FREQ3_2 contains the least significant 16-bit half-word.
+ * 0x80000000 seems to be equivalent to the pixel clock
+ * (which itself is the VEC clock divided by 8).
+ *
+ * Reference values (with the default pixel clock of 13.5 MHz):
+ *
+ * NTSC  (3579545.[45] Hz)     - 0x21F07C1F
+ * PAL   (4433618.75 Hz)       - 0x2A098ACB
+ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3
+ * PAL-N (3582056.25 Hz)       - 0x21F69446
+ *
+ * NOTE: For SECAM, it is used as the Dr center frequency,
+ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not;
+ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72.
+ */
 #define VEC_FREQ3_2			0x180
 #define VEC_FREQ1_0			0x184
 
@@ -118,6 +140,14 @@
 
 #define VEC_INTERRUPT_CONTROL		0x190
 #define VEC_INTERRUPT_STATUS		0x194
+
+/*
+ * Db center frequency for SECAM; the clock for this is the same as for
+ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency.
+ *
+ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13.
+ * That is also the default value, so no need to set it explicitly.
+ */
 #define VEC_FCW_SECAM_B			0x198
 #define VEC_SECAM_GAIN_VAL		0x19c
 
@@ -197,10 +227,15 @@ enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC_J,
 	VC4_VEC_TV_MODE_PAL,
 	VC4_VEC_TV_MODE_PAL_M,
+	VC4_VEC_TV_MODE_NTSC_443,
+	VC4_VEC_TV_MODE_PAL_60,
+	VC4_VEC_TV_MODE_PAL_N,
+	VC4_VEC_TV_MODE_SECAM,
 };
 
 struct vc4_vec_tv_mode {
 	unsigned int mode;
+	u16 expected_htotal;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -236,35 +271,68 @@ static const struct debugfs_reg32 vec_regs[] = {
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_443,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_NTSC_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC_J,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		/* PAL-60 */
+		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_PAL_M_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL_M,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_N,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_PAL_N_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	{
+		.mode = DRM_MODE_TV_MODE_SECAM,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_SECAM_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+		.custom_freq = 0x29c71c72,
+	},
 };
 
 static inline const struct vc4_vec_tv_mode *
-vc4_vec_tv_mode_lookup(unsigned int mode)
+vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
 		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
 
-		if (tv_mode->mode == mode)
+		if (tv_mode->mode == mode &&
+		    tv_mode->expected_htotal == htotal)
 			return tv_mode;
 	}
 
@@ -273,9 +341,13 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
 
 static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
 	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
 	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
 	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_60, "PAL-60", },
 	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+	{ VC4_VEC_TV_MODE_PAL_N, "PAL-N", },
+	{ VC4_VEC_TV_MODE_SECAM, "SECAM", },
 };
 
 static enum drm_connector_status
@@ -306,11 +378,16 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
 		break;
 
+	case VC4_VEC_TV_MODE_NTSC_443:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_443;
+		break;
+
 	case VC4_VEC_TV_MODE_NTSC_J:
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
 		break;
 
 	case VC4_VEC_TV_MODE_PAL:
+	case VC4_VEC_TV_MODE_PAL_60:
 		state->tv.mode = DRM_MODE_TV_MODE_PAL;
 		break;
 
@@ -318,6 +395,14 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
 		break;
 
+	case VC4_VEC_TV_MODE_PAL_N:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_N;
+		break;
+
+	case VC4_VEC_TV_MODE_SECAM:
+		state->tv.mode = DRM_MODE_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -341,6 +426,10 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_NTSC;
 		break;
 
+	case DRM_MODE_TV_MODE_NTSC_443:
+		*val = VC4_VEC_TV_MODE_NTSC_443;
+		break;
+
 	case DRM_MODE_TV_MODE_NTSC_J:
 		*val = VC4_VEC_TV_MODE_NTSC_J;
 		break;
@@ -353,6 +442,14 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_PAL_M;
 		break;
 
+	case DRM_MODE_TV_MODE_PAL_N:
+		*val = VC4_VEC_TV_MODE_PAL_N;
+		break;
+
+	case DRM_MODE_TV_MODE_SECAM:
+		*val = VC4_VEC_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -448,13 +545,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_display_mode *adjusted_mode =
+		&encoder->crtc->state->adjusted_mode;
 	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode,
+					 adjusted_mode->htotal);
 	if (!tv_mode)
 		goto err_dev_exit;
 
@@ -643,9 +743,12 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 
 	ret = drm_mode_create_tv_properties(drm,
 					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_443) |
 					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
 					    BIT(DRM_MODE_TV_MODE_PAL) |
-					    BIT(DRM_MODE_TV_MODE_PAL_M));
+					    BIT(DRM_MODE_TV_MODE_PAL_M) |
+					    BIT(DRM_MODE_TV_MODE_PAL_N) |
+					    BIT(DRM_MODE_TV_MODE_SECAM));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

WARNING: multiple messages have this Message-ID (diff)
From: maxime@cerno.tech
To: Karol Herbst <kherbst@redhat.com>, Emma Anholt <emma@anholt.net>,
	Ben Skeggs <bskeggs@redhat.com>, Chen-Yu Tsai <wens@csie.org>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Jani Nikula <jani.nikula@linux.intel.com>,
	Daniel Vetter <daniel@ffwll.ch>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
	Samuel Holland <samuel@sholland.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	David Airlie <airlied@linux.ie>,
	Maxime Ripard <mripard@kernel.org>,
	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	Lyude Paul <lyude@redhat.com>
Cc: linux-sunxi@lists.linux.dev, Maxime Ripard <maxime@cerno.tech>,
	intel-gfx@lists.freedesktop.org,
	Phil Elwell <phil@raspberrypi.com>,
	linux-arm-kernel@lists.infradead.org,
	nouveau@lists.freedesktop.org,
	Hans de Goede <hdegoede@redhat.com>,
	Dom Cobley <dom@raspberrypi.com>,
	Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>,
	dri-devel@lists.freedesktop.org,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	linux-kernel@vger.kernel.org, Noralf Trønnes <noralf@tronnes.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH v6 22/23] drm/vc4: vec: Add support for more analog TV standards
Date: Wed, 26 Oct 2022 17:33:41 +0200	[thread overview]
Message-ID: <20220728-rpi-analog-tv-properties-v6-22-e7792734108f@cerno.tech> (raw)
In-Reply-To: <20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech>

From: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>

Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):

- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
  4.43361875 MHz (the PAL subcarrier frequency). Never used for
  broadcasting, but sometimes used as a hack to play NTSC content in PAL
  regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
  3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
  and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
  frequency. Another non-standard, non-broadcast mode, used in similar
  contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
  been broadcast in Eastern Europe and various parts of Africa and Asia.
  Uses the same 576i50 timings as PAL.

Also added some comments explaining color subcarrier frequency
registers.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v6:
- Support PAL60 again
---
 drivers/gpu/drm/vc4/vc4_vec.c | 111 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 107 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 1dda451c8def..d82aef168075 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -46,6 +46,7 @@
 #define VEC_CONFIG0_YDEL(x)		((x) << 26)
 #define VEC_CONFIG0_CDEL_MASK		GENMASK(25, 24)
 #define VEC_CONFIG0_CDEL(x)		((x) << 24)
+#define VEC_CONFIG0_SECAM_STD		BIT(21)
 #define VEC_CONFIG0_PBPR_FIL		BIT(18)
 #define VEC_CONFIG0_CHROMA_GAIN_MASK	GENMASK(17, 16)
 #define VEC_CONFIG0_CHROMA_GAIN_UNITY	(0 << 16)
@@ -76,6 +77,27 @@
 #define VEC_SOFT_RESET			0x10c
 #define VEC_CLMP0_START			0x144
 #define VEC_CLMP0_END			0x148
+
+/*
+ * These set the color subcarrier frequency
+ * if VEC_CONFIG1_CUSTOM_FREQ is enabled.
+ *
+ * VEC_FREQ1_0 contains the most significant 16-bit half-word,
+ * VEC_FREQ3_2 contains the least significant 16-bit half-word.
+ * 0x80000000 seems to be equivalent to the pixel clock
+ * (which itself is the VEC clock divided by 8).
+ *
+ * Reference values (with the default pixel clock of 13.5 MHz):
+ *
+ * NTSC  (3579545.[45] Hz)     - 0x21F07C1F
+ * PAL   (4433618.75 Hz)       - 0x2A098ACB
+ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3
+ * PAL-N (3582056.25 Hz)       - 0x21F69446
+ *
+ * NOTE: For SECAM, it is used as the Dr center frequency,
+ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not;
+ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72.
+ */
 #define VEC_FREQ3_2			0x180
 #define VEC_FREQ1_0			0x184
 
@@ -118,6 +140,14 @@
 
 #define VEC_INTERRUPT_CONTROL		0x190
 #define VEC_INTERRUPT_STATUS		0x194
+
+/*
+ * Db center frequency for SECAM; the clock for this is the same as for
+ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency.
+ *
+ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13.
+ * That is also the default value, so no need to set it explicitly.
+ */
 #define VEC_FCW_SECAM_B			0x198
 #define VEC_SECAM_GAIN_VAL		0x19c
 
@@ -197,10 +227,15 @@ enum vc4_vec_tv_mode_id {
 	VC4_VEC_TV_MODE_NTSC_J,
 	VC4_VEC_TV_MODE_PAL,
 	VC4_VEC_TV_MODE_PAL_M,
+	VC4_VEC_TV_MODE_NTSC_443,
+	VC4_VEC_TV_MODE_PAL_60,
+	VC4_VEC_TV_MODE_PAL_N,
+	VC4_VEC_TV_MODE_SECAM,
 };
 
 struct vc4_vec_tv_mode {
 	unsigned int mode;
+	u16 expected_htotal;
 	u32 config0;
 	u32 config1;
 	u32 custom_freq;
@@ -236,35 +271,68 @@ static const struct debugfs_reg32 vec_regs[] = {
 static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_NTSC_443,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_NTSC_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_NTSC_J,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_NTSC_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 864,
 		.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		/* PAL-60 */
+		.mode = DRM_MODE_TV_MODE_PAL,
+		.expected_htotal = 858,
+		.config0 = VEC_CONFIG0_PAL_M_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+		.custom_freq = 0x2a098acb,
+	},
 	{
 		.mode = DRM_MODE_TV_MODE_PAL_M,
+		.expected_htotal = 858,
 		.config0 = VEC_CONFIG0_PAL_M_STD,
 		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
 	},
+	{
+		.mode = DRM_MODE_TV_MODE_PAL_N,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_PAL_N_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+	},
+	{
+		.mode = DRM_MODE_TV_MODE_SECAM,
+		.expected_htotal = 864,
+		.config0 = VEC_CONFIG0_SECAM_STD,
+		.config1 = VEC_CONFIG1_C_CVBS_CVBS,
+		.custom_freq = 0x29c71c72,
+	},
 };
 
 static inline const struct vc4_vec_tv_mode *
-vc4_vec_tv_mode_lookup(unsigned int mode)
+vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
 		const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
 
-		if (tv_mode->mode == mode)
+		if (tv_mode->mode == mode &&
+		    tv_mode->expected_htotal == htotal)
 			return tv_mode;
 	}
 
@@ -273,9 +341,13 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
 
 static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
 	{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+	{ VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
 	{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
 	{ VC4_VEC_TV_MODE_PAL, "PAL", },
+	{ VC4_VEC_TV_MODE_PAL_60, "PAL-60", },
 	{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+	{ VC4_VEC_TV_MODE_PAL_N, "PAL-N", },
+	{ VC4_VEC_TV_MODE_SECAM, "SECAM", },
 };
 
 static enum drm_connector_status
@@ -306,11 +378,16 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC;
 		break;
 
+	case VC4_VEC_TV_MODE_NTSC_443:
+		state->tv.mode = DRM_MODE_TV_MODE_NTSC_443;
+		break;
+
 	case VC4_VEC_TV_MODE_NTSC_J:
 		state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
 		break;
 
 	case VC4_VEC_TV_MODE_PAL:
+	case VC4_VEC_TV_MODE_PAL_60:
 		state->tv.mode = DRM_MODE_TV_MODE_PAL;
 		break;
 
@@ -318,6 +395,14 @@ vc4_vec_connector_set_property(struct drm_connector *connector,
 		state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
 		break;
 
+	case VC4_VEC_TV_MODE_PAL_N:
+		state->tv.mode = DRM_MODE_TV_MODE_PAL_N;
+		break;
+
+	case VC4_VEC_TV_MODE_SECAM:
+		state->tv.mode = DRM_MODE_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -341,6 +426,10 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_NTSC;
 		break;
 
+	case DRM_MODE_TV_MODE_NTSC_443:
+		*val = VC4_VEC_TV_MODE_NTSC_443;
+		break;
+
 	case DRM_MODE_TV_MODE_NTSC_J:
 		*val = VC4_VEC_TV_MODE_NTSC_J;
 		break;
@@ -353,6 +442,14 @@ vc4_vec_connector_get_property(struct drm_connector *connector,
 		*val = VC4_VEC_TV_MODE_PAL_M;
 		break;
 
+	case DRM_MODE_TV_MODE_PAL_N:
+		*val = VC4_VEC_TV_MODE_PAL_N;
+		break;
+
+	case DRM_MODE_TV_MODE_SECAM:
+		*val = VC4_VEC_TV_MODE_SECAM;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -448,13 +545,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder *encoder,
 	struct drm_connector *connector = &vec->connector;
 	struct drm_connector_state *conn_state =
 		drm_atomic_get_new_connector_state(state, connector);
+	struct drm_display_mode *adjusted_mode =
+		&encoder->crtc->state->adjusted_mode;
 	const struct vc4_vec_tv_mode *tv_mode;
 	int idx, ret;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+	tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode,
+					 adjusted_mode->htotal);
 	if (!tv_mode)
 		goto err_dev_exit;
 
@@ -643,9 +743,12 @@ static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
 
 	ret = drm_mode_create_tv_properties(drm,
 					    BIT(DRM_MODE_TV_MODE_NTSC) |
+					    BIT(DRM_MODE_TV_MODE_NTSC_443) |
 					    BIT(DRM_MODE_TV_MODE_NTSC_J) |
 					    BIT(DRM_MODE_TV_MODE_PAL) |
-					    BIT(DRM_MODE_TV_MODE_PAL_M));
+					    BIT(DRM_MODE_TV_MODE_PAL_M) |
+					    BIT(DRM_MODE_TV_MODE_PAL_N) |
+					    BIT(DRM_MODE_TV_MODE_SECAM));
 	if (ret)
 		return ret;
 

-- 
b4 0.11.0-dev-99e3a

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-10-26 15:34 UTC|newest]

Thread overview: 222+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-26 15:33 [PATCH v6 00/23] drm: Analog TV Improvements maxime
2022-10-26 15:33 ` maxime
2022-10-26 15:33 ` [Intel-gfx] " maxime
2022-10-26 15:33 ` maxime
2022-10-26 15:33 ` [Nouveau] " maxime
2022-10-26 15:33 ` [Intel-gfx] [PATCH v6 01/23] drm/tests: Add Kunit Helpers maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33 ` [PATCH v6 02/23] drm/connector: Rename legacy TV property maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33 ` [PATCH v6 03/23] drm/connector: Only register TV mode property if present maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33 ` [PATCH v6 04/23] drm/connector: Rename drm_mode_create_tv_properties maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33 ` [PATCH v6 05/23] drm/connector: Add TV standard property maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33 ` [PATCH v6 06/23] drm/modes: Add a function to generate analog display modes maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33 ` [PATCH v6 07/23] drm/client: Add some tests for drm_connector_pick_cmdline_mode() maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33 ` [PATCH v6 08/23] drm/modes: Move named modes parsing to a separate function maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-11-05 14:02   ` Noralf Trønnes
2022-11-05 14:02     ` [Intel-gfx] " Noralf Trønnes
2022-11-05 14:02     ` Noralf Trønnes
2022-11-05 14:02     ` Noralf Trønnes
2022-11-05 14:02     ` [Nouveau] " Noralf Trønnes
2022-10-26 15:33 ` [PATCH v6 09/23] drm/modes: Switch to named mode descriptors maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-11-05 14:06   ` Noralf Trønnes
2022-11-05 14:06     ` Noralf Trønnes
2022-11-05 14:06     ` [Intel-gfx] " Noralf Trønnes
2022-11-05 14:06     ` Noralf Trønnes
2022-11-05 14:06     ` [Nouveau] " Noralf Trønnes
2022-10-26 15:33 ` [PATCH v6 10/23] drm/modes: Fill drm_cmdline mode from named modes maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-11-06 13:04   ` Noralf Trønnes
2022-11-06 13:04     ` Noralf Trønnes
2022-11-06 13:04     ` [Intel-gfx] " Noralf Trønnes
2022-11-06 13:04     ` Noralf Trønnes
2022-11-06 13:04     ` [Nouveau] " Noralf Trønnes
2022-11-07 10:02     ` Maxime Ripard
2022-11-07 10:02       ` Maxime Ripard
2022-11-07 10:02       ` [Intel-gfx] " Maxime Ripard
2022-11-07 10:02       ` Maxime Ripard
2022-11-07 10:02       ` [Nouveau] " Maxime Ripard
2022-10-26 15:33 ` [PATCH v6 11/23] drm/connector: Add pixel clock to cmdline mode maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-11-06 13:06   ` Noralf Trønnes
2022-11-06 13:06     ` [Intel-gfx] " Noralf Trønnes
2022-11-06 13:06     ` Noralf Trønnes
2022-11-06 13:06     ` Noralf Trønnes
2022-11-06 13:06     ` [Nouveau] " Noralf Trønnes
2022-10-26 15:33 ` [PATCH v6 12/23] drm/connector: Add a function to lookup a TV mode by its name maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33 ` [PATCH v6 13/23] drm/modes: Introduce the tv_mode property as a command-line option maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-11-06 13:10   ` Noralf Trønnes
2022-11-06 13:10     ` Noralf Trønnes
2022-11-06 13:10     ` [Intel-gfx] " Noralf Trønnes
2022-11-06 13:10     ` Noralf Trønnes
2022-11-06 13:10     ` [Nouveau] " Noralf Trønnes
2022-11-06 15:51     ` Lukas Satin
2022-10-26 15:33 ` [PATCH v6 14/23] drm/modes: Properly generate a drm_display_mode from a named mode maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 21:25   ` Mateusz Kwiatkowski
2022-10-26 21:25     ` Mateusz Kwiatkowski
2022-10-26 21:25     ` [Intel-gfx] " Mateusz Kwiatkowski
2022-10-26 21:25     ` Mateusz Kwiatkowski
2022-10-26 21:25     ` [Nouveau] " Mateusz Kwiatkowski
2022-11-05 17:50   ` Noralf Trønnes
2022-11-05 17:50     ` Noralf Trønnes
2022-11-05 17:50     ` [Intel-gfx] " Noralf Trønnes
2022-11-05 17:50     ` Noralf Trønnes
2022-11-05 17:50     ` [Nouveau] " Noralf Trønnes
2022-11-07 13:34     ` Maxime Ripard
2022-11-07 13:34       ` Maxime Ripard
2022-11-07 13:34       ` [Intel-gfx] " Maxime Ripard
2022-11-07 13:34       ` Maxime Ripard
2022-11-07 13:34       ` [Nouveau] " Maxime Ripard
2022-10-26 15:33 ` [PATCH v6 15/23] drm/modes: Introduce more named modes maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33 ` [PATCH v6 16/23] drm/probe-helper: Provide a TV get_modes helper maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 22:02   ` Mateusz Kwiatkowski
2022-10-26 22:02     ` Mateusz Kwiatkowski
2022-10-26 22:02     ` [Intel-gfx] " Mateusz Kwiatkowski
2022-10-26 22:02     ` Mateusz Kwiatkowski
2022-10-26 22:02     ` [Nouveau] " Mateusz Kwiatkowski
2022-10-27  9:37     ` Maxime Ripard
2022-10-27  9:37       ` Maxime Ripard
2022-10-27  9:37       ` [Intel-gfx] " Maxime Ripard
2022-10-27  9:37       ` Maxime Ripard
2022-10-27  9:37       ` [Nouveau] " Maxime Ripard
2022-11-06 16:59     ` Noralf Trønnes
2022-11-06 16:59       ` Noralf Trønnes
2022-11-06 16:59       ` [Intel-gfx] " Noralf Trønnes
2022-11-06 16:59       ` Noralf Trønnes
2022-11-06 16:59       ` [Nouveau] " Noralf Trønnes
2022-11-07 10:07       ` Maxime Ripard
2022-11-07 10:07         ` Maxime Ripard
2022-11-07 10:07         ` [Intel-gfx] " Maxime Ripard
2022-11-07 10:07         ` Maxime Ripard
2022-11-07 10:07         ` [Nouveau] " Maxime Ripard
2022-11-07 11:17         ` Noralf Trønnes
2022-11-07 11:17           ` Noralf Trønnes
2022-11-07 11:17           ` [Intel-gfx] " Noralf Trønnes
2022-11-07 11:17           ` Noralf Trønnes
2022-11-07 11:17           ` [Nouveau] " Noralf Trønnes
2022-11-06 16:33   ` Noralf Trønnes
2022-11-06 16:33     ` Noralf Trønnes
2022-11-06 16:33     ` [Intel-gfx] " Noralf Trønnes
2022-11-06 16:33     ` Noralf Trønnes
2022-11-06 16:33     ` [Nouveau] " Noralf Trønnes
2022-11-07 10:21     ` Maxime Ripard
2022-11-07 10:21       ` Maxime Ripard
2022-11-07 10:21       ` [Intel-gfx] " Maxime Ripard
2022-11-07 10:21       ` Maxime Ripard
2022-11-07 10:21       ` [Nouveau] " Maxime Ripard
2022-11-07 11:29       ` Noralf Trønnes
2022-11-07 11:29         ` Noralf Trønnes
2022-11-07 11:29         ` [Intel-gfx] " Noralf Trønnes
2022-11-07 11:29         ` Noralf Trønnes
2022-11-07 11:29         ` [Nouveau] " Noralf Trønnes
2022-11-07 12:45         ` Maxime Ripard
2022-11-07 12:45           ` Maxime Ripard
2022-11-07 12:45           ` [Intel-gfx] " Maxime Ripard
2022-11-07 12:45           ` Maxime Ripard
2022-11-07 12:45           ` [Nouveau] " Maxime Ripard
2022-10-26 15:33 ` [PATCH v6 17/23] drm/atomic-helper: Add a TV properties reset helper maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33 ` [PATCH v6 18/23] drm/atomic-helper: Add an analog TV atomic_check implementation maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33 ` [PATCH v6 19/23] drm/vc4: vec: Use TV Reset implementation maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33 ` [PATCH v6 20/23] drm/vc4: vec: Check for VEC output constraints maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33 ` [PATCH v6 21/23] drm/vc4: vec: Convert to the new TV mode property maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 15:33 ` maxime [this message]
2022-10-26 15:33   ` [PATCH v6 22/23] drm/vc4: vec: Add support for more analog TV standards maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 22:32   ` Mateusz Kwiatkowski
2022-10-26 22:32     ` Mateusz Kwiatkowski
2022-10-26 22:32     ` [Intel-gfx] " Mateusz Kwiatkowski
2022-10-26 22:32     ` Mateusz Kwiatkowski
2022-10-26 22:32     ` [Nouveau] " Mateusz Kwiatkowski
2022-10-27 11:58     ` Maxime Ripard
2022-10-27 11:58       ` [Intel-gfx] " Maxime Ripard
2022-10-27 11:58       ` Maxime Ripard
2022-10-27 11:58       ` Maxime Ripard
2022-10-27 11:58       ` [Nouveau] " Maxime Ripard
2022-10-26 15:33 ` [PATCH v6 23/23] drm/sun4i: tv: Convert to the new TV mode property maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Intel-gfx] " maxime
2022-10-26 15:33   ` maxime
2022-10-26 15:33   ` [Nouveau] " maxime
2022-10-26 17:01 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for drm: Analog TV Improvements (rev6) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220728-rpi-analog-tv-properties-v6-22-e7792734108f@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=bskeggs@redhat.com \
    --cc=daniel@ffwll.ch \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dom@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=emma@anholt.net \
    --cc=geert@linux-m68k.org \
    --cc=hdegoede@redhat.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=joonas.lahtinen@linux.intel.com \
    --cc=kfyatek+publicgit@gmail.com \
    --cc=kherbst@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=lyude@redhat.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=noralf@tronnes.org \
    --cc=nouveau@lists.freedesktop.org \
    --cc=phil@raspberrypi.com \
    --cc=rodrigo.vivi@intel.com \
    --cc=samuel@sholland.org \
    --cc=tvrtko.ursulin@linux.intel.com \
    --cc=tzimmermann@suse.de \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.