[PATCH 5.10 00/65] 5.10.135-rc1 review

[PATCH 5.10 00/65] 5.10.135-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.10.135 release.
There are 65 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 03 Aug 2022 11:41:16 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.135-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.10.135-rc1

Tianchen Ding <dtcccc@linux.alibaba.com>
    selftests: bpf: Don't run sk_lookup in verifier tests

Tianchen Ding <dtcccc@linux.alibaba.com>
    bpf: Add PROG_TEST_RUN support for sk_lookup programs

Tianchen Ding <dtcccc@linux.alibaba.com>
    bpf: Consolidate shared test timing code

Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
    x86/bugs: Do not enable IBPB at firmware entry when IBPB is not available

Dave Chinner <dchinner@redhat.com>
    xfs: Enforce attr3 buffer recovery order

Dave Chinner <dchinner@redhat.com>
    xfs: logging the on disk inode LSN can make it go backwards

Brian Foster <bfoster@redhat.com>
    xfs: remove dead stale buf unpin handling code

Brian Foster <bfoster@redhat.com>
    xfs: hold buffer across unpin and potential shutdown processing

Darrick J. Wong <djwong@kernel.org>
    xfs: force the log offline when log intent item recovery fails

Darrick J. Wong <djwong@kernel.org>
    xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes

Darrick J. Wong <djwong@kernel.org>
    xfs: prevent UAF in xfs_log_item_in_current_chkpt

Dave Chinner <dchinner@redhat.com>
    xfs: xfs_log_force_lsn isn't passed a LSN

Christoph Hellwig <hch@lst.de>
    xfs: refactor xfs_file_fsync

Eiichi Tsukata <eiichi.tsukata@nutanix.com>
    docs/kernel-parameters: Update descriptions for "mitigations=" param with retbleed

Toshi Kani <toshi.kani@hpe.com>
    EDAC/ghes: Set the DIMM label unconditionally

Florian Fainelli <f.fainelli@gmail.com>
    ARM: 9216/1: Fix MAX_DMA_ADDRESS overflow

Wei Mingzhi <whistler@member.fsf.org>
    mt7601u: add USB device ID for some versions of XiaoDu WiFi Dongle.

Jaewon Kim <jaewon31.kim@samsung.com>
    page_alloc: fix invalid watermark check on a negative value

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    ARM: crypto: comment out gcc warning that breaks clang builds

Xin Long <lucien.xin@gmail.com>
    sctp: leave the err path free in sctp_stream_init to sctp_stream_free

Alejandro Lucero <alejandro.lucero-palau@amd.com>
    sfc: disable softirqs for ptp TX

Leo Yan <leo.yan@linaro.org>
    perf symbol: Correct address for bss symbols

Jason Wang <jasowang@redhat.com>
    virtio-net: fix the race between refill work and close

Florian Westphal <fw@strlen.de>
    netfilter: nf_queue: do not allow packet truncation below transport header offset

Duoming Zhou <duoming@zju.edu.cn>
    sctp: fix sleep in atomic context bug in timer handlers

Michal Maloszewski <michal.maloszewski@intel.com>
    i40e: Fix interface init with MSI interrupts (no MSI-X)

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix data-races around sysctl_tcp_reflect_tos.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_comp_sack_nr.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_comp_sack_slack_ns.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_comp_sack_delay_ns.

Jianglei Nie <niejianglei2021@163.com>
    net: macsec: fix potential resource leak in macsec_add_rxsa() and macsec_add_txsa()

Sabrina Dubroca <sd@queasysnail.net>
    macsec: always read MACSEC_SA_ATTR_PN as a u64

Sabrina Dubroca <sd@queasysnail.net>
    macsec: limit replay window size with XPN

Sabrina Dubroca <sd@queasysnail.net>
    macsec: fix error message in macsec_add_rxsa and _txsa

Sabrina Dubroca <sd@queasysnail.net>
    macsec: fix NULL deref in macsec_add_rxsa

Xin Long <lucien.xin@gmail.com>
    Documentation: fix sctp_wmem in ip-sysctl.rst

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_invalid_ratelimit.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_autocorking.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_min_rtt_wlen.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_min_tso_segs.

Liang He <windhl@126.com>
    net: sungem_phy: Add of_node_put() for reference returned by of_get_parent()

Kuniyuki Iwashima <kuniyu@amazon.com>
    igmp: Fix data-races around sysctl_igmp_qrv.

Maxim Mikityanskiy <maximmi@nvidia.com>
    net/tls: Remove the context from the list in tls_device_down

Ziyang Xuan <william.xuanziyang@huawei.com>
    ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr

Kuniyuki Iwashima <kuniyu@amazon.com>
    net: ping6: Fix memleak in ipv6_renew_options().

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_challenge_ack_limit.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_limit_output_bytes.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix data-races around sysctl_tcp_moderate_rcvbuf.

Wei Wang <weiwan@google.com>
    Revert "tcp: change pingpong threshold to 3"

Liang He <windhl@126.com>
    scsi: ufs: host: Hold reference returned by of_parse_phandle()

Maciej Fijalkowski <maciej.fijalkowski@intel.com>
    ice: do not setup vlan for loopback VSI

Maciej Fijalkowski <maciej.fijalkowski@intel.com>
    ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix data-races around sysctl_tcp_no_ssthresh_metrics_save.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_nometrics_save.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_frto.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_adv_win_scale.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix a data-race around sysctl_tcp_app_win.

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp: Fix data-races around sysctl_tcp_dsack.

Linus Torvalds <torvalds@linux-foundation.org>
    watch_queue: Fix missing locking in add_watch_to_object()

David Howells <dhowells@redhat.com>
    watch_queue: Fix missing rcu annotation

Alistair Popple <apopple@nvidia.com>
    nouveau/svm: Fix to migrate all requested pages

Harald Freudenberger <freude@linux.ibm.com>
    s390/archrandom: prevent CPACF trng invocations in interrupt context

ChenXiaoSong <chenxiaosong2@huawei.com>
    ntfs: fix use-after-free in ntfs_ucsncmp()

Junxiao Bi <ocfs2-devel@oss.oracle.com>
    Revert "ocfs2: mount shared volume without ha stack"

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put


-------------

Diffstat:

 Documentation/admin-guide/kernel-parameters.txt    |   2 +
 Documentation/networking/ip-sysctl.rst             |   9 +-
 Makefile                                           |   4 +-
 arch/arm/include/asm/dma.h                         |   2 +-
 arch/arm/lib/xor-neon.c                            |   3 +-
 arch/s390/include/asm/archrandom.h                 |   9 +-
 arch/x86/kernel/cpu/bugs.c                         |   1 +
 drivers/edac/ghes_edac.c                           |  11 +-
 drivers/gpu/drm/nouveau/nouveau_dmem.c             |   6 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c        |   4 +
 drivers/net/ethernet/intel/ice/ice_ethtool.c       |   3 +-
 drivers/net/ethernet/intel/ice/ice_main.c          |   8 +-
 drivers/net/ethernet/sfc/ptp.c                     |  22 ++
 drivers/net/macsec.c                               |  33 ++-
 drivers/net/sungem_phy.c                           |   1 +
 drivers/net/virtio_net.c                           |  37 +++-
 drivers/net/wireless/mediatek/mt7601u/usb.c        |   1 +
 drivers/scsi/ufs/ufshcd-pltfrm.c                   |  15 +-
 fs/ntfs/attrib.c                                   |   8 +-
 fs/ocfs2/ocfs2.h                                   |   4 +-
 fs/ocfs2/slot_map.c                                |  46 ++--
 fs/ocfs2/super.c                                   |  21 --
 fs/xfs/libxfs/xfs_log_format.h                     |  11 +-
 fs/xfs/libxfs/xfs_types.h                          |   1 +
 fs/xfs/xfs_buf_item.c                              |  60 ++---
 fs/xfs/xfs_buf_item_recover.c                      |   1 +
 fs/xfs/xfs_dquot_item.c                            |   2 +-
 fs/xfs/xfs_file.c                                  |  81 ++++---
 fs/xfs/xfs_inode.c                                 |  10 +-
 fs/xfs/xfs_inode_item.c                            |   4 +-
 fs/xfs/xfs_inode_item.h                            |   2 +-
 fs/xfs/xfs_inode_item_recover.c                    |  39 +++-
 fs/xfs/xfs_log.c                                   |  30 +--
 fs/xfs/xfs_log.h                                   |   4 +-
 fs/xfs/xfs_log_cil.c                               |  32 +--
 fs/xfs/xfs_log_priv.h                              |  15 +-
 fs/xfs/xfs_log_recover.c                           |   5 +-
 fs/xfs/xfs_mount.c                                 |  10 +-
 fs/xfs/xfs_trans.c                                 |   6 +-
 fs/xfs/xfs_trans.h                                 |   4 +-
 include/linux/bpf.h                                |  10 +
 include/net/addrconf.h                             |   3 +
 include/net/bluetooth/l2cap.h                      |   1 +
 include/net/inet_connection_sock.h                 |  10 +-
 include/net/tcp.h                                  |   2 +-
 include/uapi/linux/bpf.h                           |   5 +-
 kernel/watch_queue.c                               |  58 +++--
 mm/page_alloc.c                                    |  12 +-
 net/bluetooth/l2cap_core.c                         |  61 ++++--
 net/bpf/test_run.c                                 | 243 +++++++++++++++------
 net/core/filter.c                                  |   1 +
 net/ipv4/igmp.c                                    |  24 +-
 net/ipv4/tcp.c                                     |   2 +-
 net/ipv4/tcp_input.c                               |  24 +-
 net/ipv4/tcp_ipv4.c                                |   4 +-
 net/ipv4/tcp_metrics.c                             |  10 +-
 net/ipv4/tcp_output.c                              |  19 +-
 net/ipv6/ping.c                                    |   6 +
 net/ipv6/tcp_ipv6.c                                |   4 +-
 net/mptcp/protocol.c                               |   2 +-
 net/netfilter/nfnetlink_queue.c                    |   7 +-
 net/sctp/associola.c                               |   5 +-
 net/sctp/stream.c                                  |  19 +-
 net/sctp/stream_sched.c                            |   2 +-
 net/tls/tls_device.c                               |   7 +-
 tools/include/uapi/linux/bpf.h                     |   5 +-
 tools/perf/util/symbol-elf.c                       |  45 +++-
 tools/testing/selftests/bpf/test_verifier.c        |   4 +-
 .../testing/selftests/bpf/verifier/ctx_sk_lookup.c |   1 +
 69 files changed, 755 insertions(+), 408 deletions(-)

[PATCH 5.10 01/65] Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put

[Greg Kroah-Hartman]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

commit d0be8347c623e0ac4202a1d4e0373882821f56b0 upstream.

This fixes the following trace which is caused by hci_rx_work starting up
*after* the final channel reference has been put() during sock_close() but
*before* the references to the channel have been destroyed, so instead
the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.

  refcount_t: increment on 0; use-after-free.
  BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0
  Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705

  CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S      W
  4.14.234-00003-g1fb6d0bd49a4-dirty #28
  Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150
  Google Inc. MSM sm8150 Flame DVT (DT)
  Workqueue: hci0 hci_rx_work
  Call trace:
   dump_backtrace+0x0/0x378
   show_stack+0x20/0x2c
   dump_stack+0x124/0x148
   print_address_description+0x80/0x2e8
   __kasan_report+0x168/0x188
   kasan_report+0x10/0x18
   __asan_load4+0x84/0x8c
   refcount_dec_and_test+0x20/0xd0
   l2cap_chan_put+0x48/0x12c
   l2cap_recv_frame+0x4770/0x6550
   l2cap_recv_acldata+0x44c/0x7a4
   hci_acldata_packet+0x100/0x188
   hci_rx_work+0x178/0x23c
   process_one_work+0x35c/0x95c
   worker_thread+0x4cc/0x960
   kthread+0x1a8/0x1c4
   ret_from_fork+0x10/0x18

Cc: stable@kernel.org
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/bluetooth/l2cap.h |    1 
 net/bluetooth/l2cap_core.c    |   61 +++++++++++++++++++++++++++++++++---------
 2 files changed, 49 insertions(+), 13 deletions(-)

--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -845,6 +845,7 @@ enum {
 };
 
 void l2cap_chan_hold(struct l2cap_chan *c);
+struct l2cap_chan *l2cap_chan_hold_unless_zero(struct l2cap_chan *c);
 void l2cap_chan_put(struct l2cap_chan *c);
 
 static inline void l2cap_chan_lock(struct l2cap_chan *chan)
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -111,7 +111,8 @@ static struct l2cap_chan *__l2cap_get_ch
 }
 
 /* Find channel with given SCID.
- * Returns locked channel. */
+ * Returns a reference locked channel.
+ */
 static struct l2cap_chan *l2cap_get_chan_by_scid(struct l2cap_conn *conn,
 						 u16 cid)
 {
@@ -119,15 +120,19 @@ static struct l2cap_chan *l2cap_get_chan
 
 	mutex_lock(&conn->chan_lock);
 	c = __l2cap_get_chan_by_scid(conn, cid);
-	if (c)
-		l2cap_chan_lock(c);
+	if (c) {
+		/* Only lock if chan reference is not 0 */
+		c = l2cap_chan_hold_unless_zero(c);
+		if (c)
+			l2cap_chan_lock(c);
+	}
 	mutex_unlock(&conn->chan_lock);
 
 	return c;
 }
 
 /* Find channel with given DCID.
- * Returns locked channel.
+ * Returns a reference locked channel.
  */
 static struct l2cap_chan *l2cap_get_chan_by_dcid(struct l2cap_conn *conn,
 						 u16 cid)
@@ -136,8 +141,12 @@ static struct l2cap_chan *l2cap_get_chan
 
 	mutex_lock(&conn->chan_lock);
 	c = __l2cap_get_chan_by_dcid(conn, cid);
-	if (c)
-		l2cap_chan_lock(c);
+	if (c) {
+		/* Only lock if chan reference is not 0 */
+		c = l2cap_chan_hold_unless_zero(c);
+		if (c)
+			l2cap_chan_lock(c);
+	}
 	mutex_unlock(&conn->chan_lock);
 
 	return c;
@@ -162,8 +171,12 @@ static struct l2cap_chan *l2cap_get_chan
 
 	mutex_lock(&conn->chan_lock);
 	c = __l2cap_get_chan_by_ident(conn, ident);
-	if (c)
-		l2cap_chan_lock(c);
+	if (c) {
+		/* Only lock if chan reference is not 0 */
+		c = l2cap_chan_hold_unless_zero(c);
+		if (c)
+			l2cap_chan_lock(c);
+	}
 	mutex_unlock(&conn->chan_lock);
 
 	return c;
@@ -497,6 +510,16 @@ void l2cap_chan_hold(struct l2cap_chan *
 	kref_get(&c->kref);
 }
 
+struct l2cap_chan *l2cap_chan_hold_unless_zero(struct l2cap_chan *c)
+{
+	BT_DBG("chan %p orig refcnt %u", c, kref_read(&c->kref));
+
+	if (!kref_get_unless_zero(&c->kref))
+		return NULL;
+
+	return c;
+}
+
 void l2cap_chan_put(struct l2cap_chan *c)
 {
 	BT_DBG("chan %p orig refcnt %d", c, kref_read(&c->kref));
@@ -1965,7 +1988,10 @@ static struct l2cap_chan *l2cap_global_c
 			src_match = !bacmp(&c->src, src);
 			dst_match = !bacmp(&c->dst, dst);
 			if (src_match && dst_match) {
-				l2cap_chan_hold(c);
+				c = l2cap_chan_hold_unless_zero(c);
+				if (!c)
+					continue;
+
 				read_unlock(&chan_list_lock);
 				return c;
 			}
@@ -1980,7 +2006,7 @@ static struct l2cap_chan *l2cap_global_c
 	}
 
 	if (c1)
-		l2cap_chan_hold(c1);
+		c1 = l2cap_chan_hold_unless_zero(c1);
 
 	read_unlock(&chan_list_lock);
 
@@ -4460,6 +4486,7 @@ static inline int l2cap_config_req(struc
 
 unlock:
 	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 	return err;
 }
 
@@ -4573,6 +4600,7 @@ static inline int l2cap_config_rsp(struc
 
 done:
 	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 	return err;
 }
 
@@ -5300,6 +5328,7 @@ send_move_response:
 	l2cap_send_move_chan_rsp(chan, result);
 
 	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 
 	return 0;
 }
@@ -5392,6 +5421,7 @@ static void l2cap_move_continue(struct l
 	}
 
 	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 }
 
 static void l2cap_move_fail(struct l2cap_conn *conn, u8 ident, u16 icid,
@@ -5421,6 +5451,7 @@ static void l2cap_move_fail(struct l2cap
 	l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
 
 	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 }
 
 static int l2cap_move_channel_rsp(struct l2cap_conn *conn,
@@ -5484,6 +5515,7 @@ static int l2cap_move_channel_confirm(st
 	l2cap_send_move_chan_cfm_rsp(conn, cmd->ident, icid);
 
 	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 
 	return 0;
 }
@@ -5519,6 +5551,7 @@ static inline int l2cap_move_channel_con
 	}
 
 	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 
 	return 0;
 }
@@ -5891,12 +5924,11 @@ static inline int l2cap_le_credits(struc
 	if (credits > max_credits) {
 		BT_ERR("LE credits overflow");
 		l2cap_send_disconn_req(chan, ECONNRESET);
-		l2cap_chan_unlock(chan);
 
 		/* Return 0 so that we don't trigger an unnecessary
 		 * command reject packet.
 		 */
-		return 0;
+		goto unlock;
 	}
 
 	chan->tx_credits += credits;
@@ -5907,7 +5939,9 @@ static inline int l2cap_le_credits(struc
 	if (chan->tx_credits)
 		chan->ops->resume(chan);
 
+unlock:
 	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 
 	return 0;
 }
@@ -7587,6 +7621,7 @@ drop:
 
 done:
 	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 }
 
 static void l2cap_conless_channel(struct l2cap_conn *conn, __le16 psm,
@@ -8074,7 +8109,7 @@ static struct l2cap_chan *l2cap_global_f
 		if (src_type != c->src_type)
 			continue;
 
-		l2cap_chan_hold(c);
+		c = l2cap_chan_hold_unless_zero(c);
 		read_unlock(&chan_list_lock);
 		return c;
 	}

[PATCH 5.10 02/65] Revert "ocfs2: mount shared volume without ha stack"

[Greg Kroah-Hartman]

From: Junxiao Bi <ocfs2-devel@oss.oracle.com>

commit c80af0c250c8f8a3c978aa5aafbe9c39b336b813 upstream.

This reverts commit 912f655d78c5d4ad05eac287f23a435924df7144.

This commit introduced a regression that can cause mount hung.  The
changes in __ocfs2_find_empty_slot causes that any node with none-zero
node number can grab the slot that was already taken by node 0, so node 1
will access the same journal with node 0, when it try to grab journal
cluster lock, it will hung because it was already acquired by node 0.
It's very easy to reproduce this, in one cluster, mount node 0 first, then
node 1, you will see the following call trace from node 1.

[13148.735424] INFO: task mount.ocfs2:53045 blocked for more than 122 seconds.
[13148.739691]       Not tainted 5.15.0-2148.0.4.el8uek.mountracev2.x86_64 #2
[13148.742560] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[13148.745846] task:mount.ocfs2     state:D stack:    0 pid:53045 ppid: 53044 flags:0x00004000
[13148.749354] Call Trace:
[13148.750718]  <TASK>
[13148.752019]  ? usleep_range+0x90/0x89
[13148.753882]  __schedule+0x210/0x567
[13148.755684]  schedule+0x44/0xa8
[13148.757270]  schedule_timeout+0x106/0x13c
[13148.759273]  ? __prepare_to_swait+0x53/0x78
[13148.761218]  __wait_for_common+0xae/0x163
[13148.763144]  __ocfs2_cluster_lock.constprop.0+0x1d6/0x870 [ocfs2]
[13148.765780]  ? ocfs2_inode_lock_full_nested+0x18d/0x398 [ocfs2]
[13148.768312]  ocfs2_inode_lock_full_nested+0x18d/0x398 [ocfs2]
[13148.770968]  ocfs2_journal_init+0x91/0x340 [ocfs2]
[13148.773202]  ocfs2_check_volume+0x39/0x461 [ocfs2]
[13148.775401]  ? iput+0x69/0xba
[13148.777047]  ocfs2_mount_volume.isra.0.cold+0x40/0x1f5 [ocfs2]
[13148.779646]  ocfs2_fill_super+0x54b/0x853 [ocfs2]
[13148.781756]  mount_bdev+0x190/0x1b7
[13148.783443]  ? ocfs2_remount+0x440/0x440 [ocfs2]
[13148.785634]  legacy_get_tree+0x27/0x48
[13148.787466]  vfs_get_tree+0x25/0xd0
[13148.789270]  do_new_mount+0x18c/0x2d9
[13148.791046]  __x64_sys_mount+0x10e/0x142
[13148.792911]  do_syscall_64+0x3b/0x89
[13148.794667]  entry_SYSCALL_64_after_hwframe+0x170/0x0
[13148.797051] RIP: 0033:0x7f2309f6e26e
[13148.798784] RSP: 002b:00007ffdcee7d408 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
[13148.801974] RAX: ffffffffffffffda RBX: 00007ffdcee7d4a0 RCX: 00007f2309f6e26e
[13148.804815] RDX: 0000559aa762a8ae RSI: 0000559aa939d340 RDI: 0000559aa93a22b0
[13148.807719] RBP: 00007ffdcee7d5b0 R08: 0000559aa93a2290 R09: 00007f230a0b4820
[13148.810659] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcee7d420
[13148.813609] R13: 0000000000000000 R14: 0000559aa939f000 R15: 0000000000000000
[13148.816564]  </TASK>

To fix it, we can just fix __ocfs2_find_empty_slot.  But original commit
introduced the feature to mount ocfs2 locally even it is cluster based,
that is a very dangerous, it can easily cause serious data corruption,
there is no way to stop other nodes mounting the fs and corrupting it.
Setup ha or other cluster-aware stack is just the cost that we have to
take for avoiding corruption, otherwise we have to do it in kernel.

Link: https://lkml.kernel.org/r/20220603222801.42488-1-junxiao.bi@oracle.com
Fixes: 912f655d78c5("ocfs2: mount shared volume without ha stack")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ocfs2/ocfs2.h    |    4 +---
 fs/ocfs2/slot_map.c |   46 +++++++++++++++++++---------------------------
 fs/ocfs2/super.c    |   21 ---------------------
 3 files changed, 20 insertions(+), 51 deletions(-)

--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -279,7 +279,6 @@ enum ocfs2_mount_options
 	OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT = 1 << 15,  /* Journal Async Commit */
 	OCFS2_MOUNT_ERRORS_CONT = 1 << 16, /* Return EIO to the calling process on error */
 	OCFS2_MOUNT_ERRORS_ROFS = 1 << 17, /* Change filesystem to read-only on error */
-	OCFS2_MOUNT_NOCLUSTER = 1 << 18, /* No cluster aware filesystem mount */
 };
 
 #define OCFS2_OSB_SOFT_RO	0x0001
@@ -675,8 +674,7 @@ static inline int ocfs2_cluster_o2cb_glo
 
 static inline int ocfs2_mount_local(struct ocfs2_super *osb)
 {
-	return ((osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT)
-		|| (osb->s_mount_opt & OCFS2_MOUNT_NOCLUSTER));
+	return (osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT);
 }
 
 static inline int ocfs2_uses_extended_slot_map(struct ocfs2_super *osb)
--- a/fs/ocfs2/slot_map.c
+++ b/fs/ocfs2/slot_map.c
@@ -254,16 +254,14 @@ static int __ocfs2_find_empty_slot(struc
 	int i, ret = -ENOSPC;
 
 	if ((preferred >= 0) && (preferred < si->si_num_slots)) {
-		if (!si->si_slots[preferred].sl_valid ||
-		    !si->si_slots[preferred].sl_node_num) {
+		if (!si->si_slots[preferred].sl_valid) {
 			ret = preferred;
 			goto out;
 		}
 	}
 
 	for(i = 0; i < si->si_num_slots; i++) {
-		if (!si->si_slots[i].sl_valid ||
-		    !si->si_slots[i].sl_node_num) {
+		if (!si->si_slots[i].sl_valid) {
 			ret = i;
 			break;
 		}
@@ -458,30 +456,24 @@ int ocfs2_find_slot(struct ocfs2_super *
 	spin_lock(&osb->osb_lock);
 	ocfs2_update_slot_info(si);
 
-	if (ocfs2_mount_local(osb))
-		/* use slot 0 directly in local mode */
-		slot = 0;
-	else {
-		/* search for ourselves first and take the slot if it already
-		 * exists. Perhaps we need to mark this in a variable for our
-		 * own journal recovery? Possibly not, though we certainly
-		 * need to warn to the user */
-		slot = __ocfs2_node_num_to_slot(si, osb->node_num);
+	/* search for ourselves first and take the slot if it already
+	 * exists. Perhaps we need to mark this in a variable for our
+	 * own journal recovery? Possibly not, though we certainly
+	 * need to warn to the user */
+	slot = __ocfs2_node_num_to_slot(si, osb->node_num);
+	if (slot < 0) {
+		/* if no slot yet, then just take 1st available
+		 * one. */
+		slot = __ocfs2_find_empty_slot(si, osb->preferred_slot);
 		if (slot < 0) {
-			/* if no slot yet, then just take 1st available
-			 * one. */
-			slot = __ocfs2_find_empty_slot(si, osb->preferred_slot);
-			if (slot < 0) {
-				spin_unlock(&osb->osb_lock);
-				mlog(ML_ERROR, "no free slots available!\n");
-				status = -EINVAL;
-				goto bail;
-			}
-		} else
-			printk(KERN_INFO "ocfs2: Slot %d on device (%s) was "
-			       "already allocated to this node!\n",
-			       slot, osb->dev_str);
-	}
+			spin_unlock(&osb->osb_lock);
+			mlog(ML_ERROR, "no free slots available!\n");
+			status = -EINVAL;
+			goto bail;
+		}
+	} else
+		printk(KERN_INFO "ocfs2: Slot %d on device (%s) was already "
+		       "allocated to this node!\n", slot, osb->dev_str);
 
 	ocfs2_set_slot(si, slot, osb->node_num);
 	osb->slot_num = slot;
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -175,7 +175,6 @@ enum {
 	Opt_dir_resv_level,
 	Opt_journal_async_commit,
 	Opt_err_cont,
-	Opt_nocluster,
 	Opt_err,
 };
 
@@ -209,7 +208,6 @@ static const match_table_t tokens = {
 	{Opt_dir_resv_level, "dir_resv_level=%u"},
 	{Opt_journal_async_commit, "journal_async_commit"},
 	{Opt_err_cont, "errors=continue"},
-	{Opt_nocluster, "nocluster"},
 	{Opt_err, NULL}
 };
 
@@ -621,13 +619,6 @@ static int ocfs2_remount(struct super_bl
 		goto out;
 	}
 
-	tmp = OCFS2_MOUNT_NOCLUSTER;
-	if ((osb->s_mount_opt & tmp) != (parsed_options.mount_opt & tmp)) {
-		ret = -EINVAL;
-		mlog(ML_ERROR, "Cannot change nocluster option on remount\n");
-		goto out;
-	}
-
 	tmp = OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL |
 		OCFS2_MOUNT_HB_NONE;
 	if ((osb->s_mount_opt & tmp) != (parsed_options.mount_opt & tmp)) {
@@ -868,7 +859,6 @@ static int ocfs2_verify_userspace_stack(
 	}
 
 	if (ocfs2_userspace_stack(osb) &&
-	    !(osb->s_mount_opt & OCFS2_MOUNT_NOCLUSTER) &&
 	    strncmp(osb->osb_cluster_stack, mopt->cluster_stack,
 		    OCFS2_STACK_LABEL_LEN)) {
 		mlog(ML_ERROR,
@@ -1149,11 +1139,6 @@ static int ocfs2_fill_super(struct super
 	       osb->s_mount_opt & OCFS2_MOUNT_DATA_WRITEBACK ? "writeback" :
 	       "ordered");
 
-	if ((osb->s_mount_opt & OCFS2_MOUNT_NOCLUSTER) &&
-	   !(osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT))
-		printk(KERN_NOTICE "ocfs2: The shared device (%s) is mounted "
-		       "without cluster aware mode.\n", osb->dev_str);
-
 	atomic_set(&osb->vol_state, VOLUME_MOUNTED);
 	wake_up(&osb->osb_mount_event);
 
@@ -1460,9 +1445,6 @@ static int ocfs2_parse_options(struct su
 		case Opt_journal_async_commit:
 			mopt->mount_opt |= OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT;
 			break;
-		case Opt_nocluster:
-			mopt->mount_opt |= OCFS2_MOUNT_NOCLUSTER;
-			break;
 		default:
 			mlog(ML_ERROR,
 			     "Unrecognized mount option \"%s\" "
@@ -1574,9 +1556,6 @@ static int ocfs2_show_options(struct seq
 	if (opts & OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT)
 		seq_printf(s, ",journal_async_commit");
 
-	if (opts & OCFS2_MOUNT_NOCLUSTER)
-		seq_printf(s, ",nocluster");
-
 	return 0;
 }
 

[PATCH 5.10 03/65] ntfs: fix use-after-free in ntfs_ucsncmp()

[Greg Kroah-Hartman]

From: ChenXiaoSong <chenxiaosong2@huawei.com>

commit 38c9c22a85aeed28d0831f230136e9cf6fa2ed44 upstream.

Syzkaller reported use-after-free bug as follows:

==================================================================
BUG: KASAN: use-after-free in ntfs_ucsncmp+0x123/0x130
Read of size 2 at addr ffff8880751acee8 by task a.out/879

CPU: 7 PID: 879 Comm: a.out Not tainted 5.19.0-rc4-next-20220630-00001-gcc5218c8bd2c-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x1c0/0x2b0
 print_address_description.constprop.0.cold+0xd4/0x484
 print_report.cold+0x55/0x232
 kasan_report+0xbf/0xf0
 ntfs_ucsncmp+0x123/0x130
 ntfs_are_names_equal.cold+0x2b/0x41
 ntfs_attr_find+0x43b/0xb90
 ntfs_attr_lookup+0x16d/0x1e0
 ntfs_read_locked_attr_inode+0x4aa/0x2360
 ntfs_attr_iget+0x1af/0x220
 ntfs_read_locked_inode+0x246c/0x5120
 ntfs_iget+0x132/0x180
 load_system_files+0x1cc6/0x3480
 ntfs_fill_super+0xa66/0x1cf0
 mount_bdev+0x38d/0x460
 legacy_get_tree+0x10d/0x220
 vfs_get_tree+0x93/0x300
 do_new_mount+0x2da/0x6d0
 path_mount+0x496/0x19d0
 __x64_sys_mount+0x284/0x300
 do_syscall_64+0x3b/0xc0
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f3f2118d9ea
Code: 48 8b 0d a9 f4 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 76 f4 0b 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc269deac8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3f2118d9ea
RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffc269dec00
RBP: 00007ffc269dec80 R08: 00007ffc269deb00 R09: 00007ffc269dec44
R10: 0000000000000000 R11: 0000000000000202 R12: 000055f81ab1d220
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>

The buggy address belongs to the physical page:
page:0000000085430378 refcount:1 mapcount:1 mapping:0000000000000000 index:0x555c6a81d pfn:0x751ac
memcg:ffff888101f7e180
anon flags: 0xfffffc00a0014(uptodate|lru|mappedtodisk|swapbacked|node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc00a0014 ffffea0001bf2988 ffffea0001de2448 ffff88801712e201
raw: 0000000555c6a81d 0000000000000000 0000000100000000 ffff888101f7e180
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880751acd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880751ace00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880751ace80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                                                          ^
 ffff8880751acf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880751acf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

The reason is that struct ATTR_RECORD->name_offset is 6485, end address of
name string is out of bounds.

Fix this by adding sanity check on end address of attribute name string.

[akpm@linux-foundation.org: coding-style cleanups]
[chenxiaosong2@huawei.com: cleanup suggested by Hawkins Jiawei]
  Link: https://lkml.kernel.org/r/20220709064511.3304299-1-chenxiaosong2@huawei.com
Link: https://lkml.kernel.org/r/20220707105329.4020708-1-chenxiaosong2@huawei.com
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: ChenXiaoSong <chenxiaosong2@huawei.com>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ntfs/attrib.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/fs/ntfs/attrib.c
+++ b/fs/ntfs/attrib.c
@@ -592,8 +592,12 @@ static int ntfs_attr_find(const ATTR_TYP
 		a = (ATTR_RECORD*)((u8*)ctx->attr +
 				le32_to_cpu(ctx->attr->length));
 	for (;;	a = (ATTR_RECORD*)((u8*)a + le32_to_cpu(a->length))) {
-		if ((u8*)a < (u8*)ctx->mrec || (u8*)a > (u8*)ctx->mrec +
-				le32_to_cpu(ctx->mrec->bytes_allocated))
+		u8 *mrec_end = (u8 *)ctx->mrec +
+		               le32_to_cpu(ctx->mrec->bytes_allocated);
+		u8 *name_end = (u8 *)a + le16_to_cpu(a->name_offset) +
+			       a->name_length * sizeof(ntfschar);
+		if ((u8*)a < (u8*)ctx->mrec || (u8*)a > mrec_end ||
+		    name_end > mrec_end)
 			break;
 		ctx->attr = a;
 		if (unlikely(le32_to_cpu(a->type) > le32_to_cpu(type) ||

[PATCH 5.10 04/65] s390/archrandom: prevent CPACF trng invocations in interrupt context

[Greg Kroah-Hartman]

From: Harald Freudenberger <freude@linux.ibm.com>

commit 918e75f77af7d2e049bb70469ec0a2c12782d96a upstream.

This patch slightly reworks the s390 arch_get_random_seed_{int,long}
implementation: Make sure the CPACF trng instruction is never
called in any interrupt context. This is done by adding an
additional condition in_task().

Justification:

There are some constrains to satisfy for the invocation of the
arch_get_random_seed_{int,long}() functions:
- They should provide good random data during kernel initialization.
- They should not be called in interrupt context as the TRNG
  instruction is relatively heavy weight and may for example
  make some network loads cause to timeout and buck.

However, it was not clear what kind of interrupt context is exactly
encountered during kernel init or network traffic eventually calling
arch_get_random_seed_long().

After some days of investigations it is clear that the s390
start_kernel function is not running in any interrupt context and
so the trng is called:

Jul 11 18:33:39 t35lp54 kernel:  [<00000001064e90ca>] arch_get_random_seed_long.part.0+0x32/0x70
Jul 11 18:33:39 t35lp54 kernel:  [<000000010715f246>] random_init+0xf6/0x238
Jul 11 18:33:39 t35lp54 kernel:  [<000000010712545c>] start_kernel+0x4a4/0x628
Jul 11 18:33:39 t35lp54 kernel:  [<000000010590402a>] startup_continue+0x2a/0x40

The condition in_task() is true and the CPACF trng provides random data
during kernel startup.

The network traffic however, is more difficult. A typical call stack
looks like this:

Jul 06 17:37:07 t35lp54 kernel:  [<000000008b5600fc>] extract_entropy.constprop.0+0x23c/0x240
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b560136>] crng_reseed+0x36/0xd8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b5604b8>] crng_make_state+0x78/0x340
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b5607e0>] _get_random_bytes+0x60/0xf8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b56108a>] get_random_u32+0xda/0x248
Jul 06 17:37:07 t35lp54 kernel:  [<000000008aefe7a8>] kfence_guarded_alloc+0x48/0x4b8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008aeff35e>] __kfence_alloc+0x18e/0x1b8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008aef7f10>] __kmalloc_node_track_caller+0x368/0x4d8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b611eac>] kmalloc_reserve+0x44/0xa0
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b611f98>] __alloc_skb+0x90/0x178
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b6120dc>] __napi_alloc_skb+0x5c/0x118
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b8f06b4>] qeth_extract_skb+0x13c/0x680
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b8f6526>] qeth_poll+0x256/0x3f8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b63d76e>] __napi_poll.constprop.0+0x46/0x2f8
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b63dbec>] net_rx_action+0x1cc/0x408
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b937302>] __do_softirq+0x132/0x6b0
Jul 06 17:37:07 t35lp54 kernel:  [<000000008abf46ce>] __irq_exit_rcu+0x13e/0x170
Jul 06 17:37:07 t35lp54 kernel:  [<000000008abf531a>] irq_exit_rcu+0x22/0x50
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b922506>] do_io_irq+0xe6/0x198
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b935826>] io_int_handler+0xd6/0x110
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b9358a6>] psw_idle_exit+0x0/0xa
Jul 06 17:37:07 t35lp54 kernel: ([<000000008ab9c59a>] arch_cpu_idle+0x52/0xe0)
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b933cfe>] default_idle_call+0x6e/0xd0
Jul 06 17:37:07 t35lp54 kernel:  [<000000008ac59f4e>] do_idle+0xf6/0x1b0
Jul 06 17:37:07 t35lp54 kernel:  [<000000008ac5a28e>] cpu_startup_entry+0x36/0x40
Jul 06 17:37:07 t35lp54 kernel:  [<000000008abb0d90>] smp_start_secondary+0x148/0x158
Jul 06 17:37:07 t35lp54 kernel:  [<000000008b935b9e>] restart_int_handler+0x6e/0x90

which confirms that the call is in softirq context. So in_task() covers exactly
the cases where we want to have CPACF trng called: not in nmi, not in hard irq,
not in soft irq but in normal task context and during kernel init.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Link: https://lore.kernel.org/r/20220713131721.257907-1-freude@linux.ibm.com
Fixes: e4f74400308c ("s390/archrandom: simplify back to earlier design and initialize earlier")
[agordeev@linux.ibm.com changed desc, added Fixes and Link, removed -stable]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/include/asm/archrandom.h |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/arch/s390/include/asm/archrandom.h
+++ b/arch/s390/include/asm/archrandom.h
@@ -2,7 +2,7 @@
 /*
  * Kernel interface for the s390 arch_random_* functions
  *
- * Copyright IBM Corp. 2017, 2020
+ * Copyright IBM Corp. 2017, 2022
  *
  * Author: Harald Freudenberger <freude@de.ibm.com>
  *
@@ -14,6 +14,7 @@
 #ifdef CONFIG_ARCH_RANDOM
 
 #include <linux/static_key.h>
+#include <linux/preempt.h>
 #include <linux/atomic.h>
 #include <asm/cpacf.h>
 
@@ -32,7 +33,8 @@ static inline bool __must_check arch_get
 
 static inline bool __must_check arch_get_random_seed_long(unsigned long *v)
 {
-	if (static_branch_likely(&s390_arch_random_available)) {
+	if (static_branch_likely(&s390_arch_random_available) &&
+	    in_task()) {
 		cpacf_trng(NULL, 0, (u8 *)v, sizeof(*v));
 		atomic64_add(sizeof(*v), &s390_arch_random_counter);
 		return true;
@@ -42,7 +44,8 @@ static inline bool __must_check arch_get
 
 static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
 {
-	if (static_branch_likely(&s390_arch_random_available)) {
+	if (static_branch_likely(&s390_arch_random_available) &&
+	    in_task()) {
 		cpacf_trng(NULL, 0, (u8 *)v, sizeof(*v));
 		atomic64_add(sizeof(*v), &s390_arch_random_counter);
 		return true;

[PATCH 5.10 05/65] nouveau/svm: Fix to migrate all requested pages

[Greg Kroah-Hartman]

From: Alistair Popple <apopple@nvidia.com>

commit 66cee9097e2b74ff3c8cc040ce5717c521a0c3fa upstream.

Users may request that pages from an OpenCL SVM allocation be migrated
to the GPU with clEnqueueSVMMigrateMem(). In Nouveau this will call into
nouveau_dmem_migrate_vma() to do the migration. If the total range to be
migrated exceeds SG_MAX_SINGLE_ALLOC the pages will be migrated in
chunks of size SG_MAX_SINGLE_ALLOC. However a typo in updating the
starting address means that only the first chunk will get migrated.

Fix the calculation so that the entire range will get migrated if
possible.

Signed-off-by: Alistair Popple <apopple@nvidia.com>
Fixes: e3d8b0890469 ("drm/nouveau/svm: map pages after migration")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720062745.960701-1-apopple@nvidia.com
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nouveau_dmem.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nouveau_dmem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dmem.c
@@ -679,7 +679,11 @@ nouveau_dmem_migrate_vma(struct nouveau_
 		goto out_free_dma;
 
 	for (i = 0; i < npages; i += max) {
-		args.end = start + (max << PAGE_SHIFT);
+		if (args.start + (max << PAGE_SHIFT) > end)
+			args.end = end;
+		else
+			args.end = args.start + (max << PAGE_SHIFT);
+
 		ret = migrate_vma_setup(&args);
 		if (ret)
 			goto out_free_pfns;

[PATCH 5.10 06/65] watch_queue: Fix missing rcu annotation

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit e0339f036ef4beb9b20f0b6532a1e0ece7f594c6 upstream.

Since __post_watch_notification() walks wlist->watchers with only the
RCU read lock held, we need to use RCU methods to add to the list (we
already use RCU methods to remove from the list).

Fix add_watch_to_object() to use hlist_add_head_rcu() instead of
hlist_add_head() for that list.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/watch_queue.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -497,7 +497,7 @@ int add_watch_to_object(struct watch *wa
 		unlock_wqueue(wqueue);
 	}
 
-	hlist_add_head(&watch->list_node, &wlist->watchers);
+	hlist_add_head_rcu(&watch->list_node, &wlist->watchers);
 	return 0;
 }
 EXPORT_SYMBOL(add_watch_to_object);

[PATCH 5.10 07/65] watch_queue: Fix missing locking in add_watch_to_object()

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit e64ab2dbd882933b65cd82ff6235d705ad65dbb6 upstream.

If a watch is being added to a queue, it needs to guard against
interference from addition of a new watch, manual removal of a watch and
removal of a watch due to some other queue being destroyed.

KEYCTL_WATCH_KEY guards against this for the same {key,queue} pair by
holding the key->sem writelocked and by holding refs on both the key and
the queue - but that doesn't prevent interaction from other {key,queue}
pairs.

While add_watch_to_object() does take the spinlock on the event queue,
it doesn't take the lock on the source's watch list.  The assumption was
that the caller would prevent that (say by taking key->sem) - but that
doesn't prevent interference from the destruction of another queue.

Fix this by locking the watcher list in add_watch_to_object().

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: syzbot+03d7b43290037d1f87ca@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: keyrings@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/watch_queue.c |   58 +++++++++++++++++++++++++++++++--------------------
 1 file changed, 36 insertions(+), 22 deletions(-)

--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -457,6 +457,33 @@ void init_watch(struct watch *watch, str
 	rcu_assign_pointer(watch->queue, wqueue);
 }
 
+static int add_one_watch(struct watch *watch, struct watch_list *wlist, struct watch_queue *wqueue)
+{
+	const struct cred *cred;
+	struct watch *w;
+
+	hlist_for_each_entry(w, &wlist->watchers, list_node) {
+		struct watch_queue *wq = rcu_access_pointer(w->queue);
+		if (wqueue == wq && watch->id == w->id)
+			return -EBUSY;
+	}
+
+	cred = current_cred();
+	if (atomic_inc_return(&cred->user->nr_watches) > task_rlimit(current, RLIMIT_NOFILE)) {
+		atomic_dec(&cred->user->nr_watches);
+		return -EAGAIN;
+	}
+
+	watch->cred = get_cred(cred);
+	rcu_assign_pointer(watch->watch_list, wlist);
+
+	kref_get(&wqueue->usage);
+	kref_get(&watch->usage);
+	hlist_add_head(&watch->queue_node, &wqueue->watches);
+	hlist_add_head_rcu(&watch->list_node, &wlist->watchers);
+	return 0;
+}
+
 /**
  * add_watch_to_object - Add a watch on an object to a watch list
  * @watch: The watch to add
@@ -471,34 +498,21 @@ void init_watch(struct watch *watch, str
  */
 int add_watch_to_object(struct watch *watch, struct watch_list *wlist)
 {
-	struct watch_queue *wqueue = rcu_access_pointer(watch->queue);
-	struct watch *w;
+	struct watch_queue *wqueue;
+	int ret = -ENOENT;
 
-	hlist_for_each_entry(w, &wlist->watchers, list_node) {
-		struct watch_queue *wq = rcu_access_pointer(w->queue);
-		if (wqueue == wq && watch->id == w->id)
-			return -EBUSY;
-	}
-
-	watch->cred = get_current_cred();
-	rcu_assign_pointer(watch->watch_list, wlist);
-
-	if (atomic_inc_return(&watch->cred->user->nr_watches) >
-	    task_rlimit(current, RLIMIT_NOFILE)) {
-		atomic_dec(&watch->cred->user->nr_watches);
-		put_cred(watch->cred);
-		return -EAGAIN;
-	}
+	rcu_read_lock();
 
+	wqueue = rcu_access_pointer(watch->queue);
 	if (lock_wqueue(wqueue)) {
-		kref_get(&wqueue->usage);
-		kref_get(&watch->usage);
-		hlist_add_head(&watch->queue_node, &wqueue->watches);
+		spin_lock(&wlist->lock);
+		ret = add_one_watch(watch, wlist, wqueue);
+		spin_unlock(&wlist->lock);
 		unlock_wqueue(wqueue);
 	}
 
-	hlist_add_head_rcu(&watch->list_node, &wlist->watchers);
-	return 0;
+	rcu_read_unlock();
+	return ret;
 }
 EXPORT_SYMBOL(add_watch_to_object);
 

[PATCH 5.10 08/65] tcp: Fix data-races around sysctl_tcp_dsack.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit 58ebb1c8b35a8ef38cd6927431e0fa7b173a632d upstream.

While reading sysctl_tcp_dsack, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -4367,7 +4367,7 @@ static void tcp_dsack_set(struct sock *s
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 
-	if (tcp_is_sack(tp) && sock_net(sk)->ipv4.sysctl_tcp_dsack) {
+	if (tcp_is_sack(tp) && READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_dsack)) {
 		int mib_idx;
 
 		if (before(seq, tp->rcv_nxt))
@@ -4414,7 +4414,7 @@ static void tcp_send_dupack(struct sock
 		NET_INC_STATS(sock_net(sk), LINUX_MIB_DELAYEDACKLOST);
 		tcp_enter_quickack_mode(sk, TCP_MAX_QUICKACKS);
 
-		if (tcp_is_sack(tp) && sock_net(sk)->ipv4.sysctl_tcp_dsack) {
+		if (tcp_is_sack(tp) && READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_dsack)) {
 			u32 end_seq = TCP_SKB_CB(skb)->end_seq;
 
 			tcp_rcv_spurious_retrans(sk, skb);

[PATCH 5.10 09/65] tcp: Fix a data-race around sysctl_tcp_app_win.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit 02ca527ac5581cf56749db9fd03d854e842253dd upstream.

While reading sysctl_tcp_app_win, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -503,7 +503,7 @@ static void tcp_grow_window(struct sock
  */
 static void tcp_init_buffer_space(struct sock *sk)
 {
-	int tcp_app_win = sock_net(sk)->ipv4.sysctl_tcp_app_win;
+	int tcp_app_win = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_app_win);
 	struct tcp_sock *tp = tcp_sk(sk);
 	int maxwin;
 

[PATCH 5.10 10/65] tcp: Fix a data-race around sysctl_tcp_adv_win_scale.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit 36eeee75ef0157e42fb6593dcc65daab289b559e upstream.

While reading sysctl_tcp_adv_win_scale, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/tcp.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1396,7 +1396,7 @@ void tcp_select_initial_window(const str
 
 static inline int tcp_win_from_space(const struct sock *sk, int space)
 {
-	int tcp_adv_win_scale = sock_net(sk)->ipv4.sysctl_tcp_adv_win_scale;
+	int tcp_adv_win_scale = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_adv_win_scale);
 
 	return tcp_adv_win_scale <= 0 ?
 		(space>>(-tcp_adv_win_scale)) :

[PATCH 5.10 11/65] tcp: Fix a data-race around sysctl_tcp_frto.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit 706c6202a3589f290e1ef9be0584a8f4a3cc0507 upstream.

While reading sysctl_tcp_frto, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2135,7 +2135,7 @@ void tcp_enter_loss(struct sock *sk)
 	 * loss recovery is underway except recurring timeout(s) on
 	 * the same SND.UNA (sec 3.2). Disable F-RTO on path MTU probing
 	 */
-	tp->frto = net->ipv4.sysctl_tcp_frto &&
+	tp->frto = READ_ONCE(net->ipv4.sysctl_tcp_frto) &&
 		   (new_recovery || icsk->icsk_retransmits) &&
 		   !inet_csk(sk)->icsk_mtup.probe_size;
 }

[PATCH 5.10 12/65] tcp: Fix a data-race around sysctl_tcp_nometrics_save.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit 8499a2454d9e8a55ce616ede9f9580f36fd5b0f3 upstream.

While reading sysctl_tcp_nometrics_save, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_metrics.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp_metrics.c
+++ b/net/ipv4/tcp_metrics.c
@@ -329,7 +329,7 @@ void tcp_update_metrics(struct sock *sk)
 	int m;
 
 	sk_dst_confirm(sk);
-	if (net->ipv4.sysctl_tcp_nometrics_save || !dst)
+	if (READ_ONCE(net->ipv4.sysctl_tcp_nometrics_save) || !dst)
 		return;
 
 	rcu_read_lock();

[PATCH 5.10 13/65] tcp: Fix data-races around sysctl_tcp_no_ssthresh_metrics_save.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit ab1ba21b523ab496b1a4a8e396333b24b0a18f9a upstream.

While reading sysctl_tcp_no_ssthresh_metrics_save, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 65e6d90168f3 ("net-tcp: Disable TCP ssthresh metrics cache by default")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_metrics.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/ipv4/tcp_metrics.c
+++ b/net/ipv4/tcp_metrics.c
@@ -385,7 +385,7 @@ void tcp_update_metrics(struct sock *sk)
 
 	if (tcp_in_initial_slowstart(tp)) {
 		/* Slow start still did not finish. */
-		if (!net->ipv4.sysctl_tcp_no_ssthresh_metrics_save &&
+		if (!READ_ONCE(net->ipv4.sysctl_tcp_no_ssthresh_metrics_save) &&
 		    !tcp_metric_locked(tm, TCP_METRIC_SSTHRESH)) {
 			val = tcp_metric_get(tm, TCP_METRIC_SSTHRESH);
 			if (val && (tp->snd_cwnd >> 1) > val)
@@ -401,7 +401,7 @@ void tcp_update_metrics(struct sock *sk)
 	} else if (!tcp_in_slow_start(tp) &&
 		   icsk->icsk_ca_state == TCP_CA_Open) {
 		/* Cong. avoidance phase, cwnd is reliable. */
-		if (!net->ipv4.sysctl_tcp_no_ssthresh_metrics_save &&
+		if (!READ_ONCE(net->ipv4.sysctl_tcp_no_ssthresh_metrics_save) &&
 		    !tcp_metric_locked(tm, TCP_METRIC_SSTHRESH))
 			tcp_metric_set(tm, TCP_METRIC_SSTHRESH,
 				       max(tp->snd_cwnd >> 1, tp->snd_ssthresh));
@@ -418,7 +418,7 @@ void tcp_update_metrics(struct sock *sk)
 			tcp_metric_set(tm, TCP_METRIC_CWND,
 				       (val + tp->snd_ssthresh) >> 1);
 		}
-		if (!net->ipv4.sysctl_tcp_no_ssthresh_metrics_save &&
+		if (!READ_ONCE(net->ipv4.sysctl_tcp_no_ssthresh_metrics_save) &&
 		    !tcp_metric_locked(tm, TCP_METRIC_SSTHRESH)) {
 			val = tcp_metric_get(tm, TCP_METRIC_SSTHRESH);
 			if (val && tp->snd_ssthresh > val)
@@ -463,7 +463,7 @@ void tcp_init_metrics(struct sock *sk)
 	if (tcp_metric_locked(tm, TCP_METRIC_CWND))
 		tp->snd_cwnd_clamp = tcp_metric_get(tm, TCP_METRIC_CWND);
 
-	val = net->ipv4.sysctl_tcp_no_ssthresh_metrics_save ?
+	val = READ_ONCE(net->ipv4.sysctl_tcp_no_ssthresh_metrics_save) ?
 	      0 : tcp_metric_get(tm, TCP_METRIC_SSTHRESH);
 	if (val) {
 		tp->snd_ssthresh = val;

[PATCH 5.10 14/65] ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)

[Greg Kroah-Hartman]

From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

commit 283d736ff7c7e96ac5b32c6c0de40372f8eb171e upstream.

Tx side sets EOP and RS bits on descriptors to indicate that a
particular descriptor is the last one and needs to generate an irq when
it was sent. These bits should not be checked on completion path
regardless whether it's the Tx or the Rx. DD bit serves this purpose and
it indicates that a particular descriptor is either for Rx or was
successfully Txed. EOF is also set as loopback test does not xmit
fragmented frames.

Look at (DD | EOF) bits setting in ice_lbtest_receive_frames() instead
of EOP and RS pair.

Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -652,7 +652,8 @@ static int ice_lbtest_receive_frames(str
 		rx_desc = ICE_RX_DESC(rx_ring, i);
 
 		if (!(rx_desc->wb.status_error0 &
-		    cpu_to_le16(ICE_TX_DESC_CMD_EOP | ICE_TX_DESC_CMD_RS)))
+		    (cpu_to_le16(BIT(ICE_RX_FLEX_DESC_STATUS0_DD_S)) |
+		     cpu_to_le16(BIT(ICE_RX_FLEX_DESC_STATUS0_EOF_S)))))
 			continue;
 
 		rx_buf = &rx_ring->rx_buf[i];

[PATCH 5.10 15/65] ice: do not setup vlan for loopback VSI

[Greg Kroah-Hartman]

From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

commit cc019545a238518fa9da1e2a889f6e1bb1005a63 upstream.

Currently loopback test is failiing due to the error returned from
ice_vsi_vlan_setup(). Skip calling it when preparing loopback VSI.

Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/ice/ice_main.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -5203,10 +5203,12 @@ int ice_vsi_cfg(struct ice_vsi *vsi)
 	if (vsi->netdev) {
 		ice_set_rx_mode(vsi->netdev);
 
-		err = ice_vsi_vlan_setup(vsi);
+		if (vsi->type != ICE_VSI_LB) {
+			err = ice_vsi_vlan_setup(vsi);
 
-		if (err)
-			return err;
+			if (err)
+				return err;
+		}
 	}
 	ice_vsi_cfg_dcb_rings(vsi);
 

[PATCH 5.10 16/65] scsi: ufs: host: Hold reference returned by of_parse_phandle()

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

commit a3435afba87dc6cd83f5595e7607f3c40f93ef01 upstream.

In ufshcd_populate_vreg(), we should hold the reference returned by
of_parse_phandle() and then use it to call of_node_put() for refcount
balance.

Link: https://lore.kernel.org/r/20220719071529.1081166-1-windhl@126.com
Fixes: aa4976130934 ("ufs: Add regulator enable support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufshcd-pltfrm.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -107,9 +107,20 @@ out:
 	return ret;
 }
 
+static bool phandle_exists(const struct device_node *np,
+			   const char *phandle_name, int index)
+{
+	struct device_node *parse_np = of_parse_phandle(np, phandle_name, index);
+
+	if (parse_np)
+		of_node_put(parse_np);
+
+	return parse_np != NULL;
+}
+
 #define MAX_PROP_SIZE 32
 static int ufshcd_populate_vreg(struct device *dev, const char *name,
-		struct ufs_vreg **out_vreg)
+				struct ufs_vreg **out_vreg)
 {
 	int ret = 0;
 	char prop_name[MAX_PROP_SIZE];
@@ -122,7 +133,7 @@ static int ufshcd_populate_vreg(struct d
 	}
 
 	snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", name);
-	if (!of_parse_phandle(np, prop_name, 0)) {
+	if (!phandle_exists(np, prop_name, 0)) {
 		dev_info(dev, "%s: Unable to find %s regulator, assuming enabled\n",
 				__func__, prop_name);
 		goto out;

[PATCH 5.10 17/65] Revert "tcp: change pingpong threshold to 3"

[Greg Kroah-Hartman]

From: Wei Wang <weiwan@google.com>

commit 4d8f24eeedc58d5f87b650ddda73c16e8ba56559 upstream.

This reverts commit 4a41f453bedfd5e9cd040bad509d9da49feb3e2c.

This to-be-reverted commit was meant to apply a stricter rule for the
stack to enter pingpong mode. However, the condition used to check for
interactive session "before(tp->lsndtime, icsk->icsk_ack.lrcvtime)" is
jiffy based and might be too coarse, which delays the stack entering
pingpong mode.
We revert this patch so that we no longer use the above condition to
determine interactive session, and also reduce pingpong threshold to 1.

Fixes: 4a41f453bedf ("tcp: change pingpong threshold to 3")
Reported-by: LemmyHuang <hlm3280@163.com>
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220721204404.388396-1-weiwan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/inet_connection_sock.h |   10 +---------
 net/ipv4/tcp_output.c              |   15 ++++++---------
 2 files changed, 7 insertions(+), 18 deletions(-)

--- a/include/net/inet_connection_sock.h
+++ b/include/net/inet_connection_sock.h
@@ -317,7 +317,7 @@ void inet_csk_update_fastreuse(struct in
 
 struct dst_entry *inet_csk_update_pmtu(struct sock *sk, u32 mtu);
 
-#define TCP_PINGPONG_THRESH	3
+#define TCP_PINGPONG_THRESH	1
 
 static inline void inet_csk_enter_pingpong_mode(struct sock *sk)
 {
@@ -334,14 +334,6 @@ static inline bool inet_csk_in_pingpong_
 	return inet_csk(sk)->icsk_ack.pingpong >= TCP_PINGPONG_THRESH;
 }
 
-static inline void inet_csk_inc_pingpong_cnt(struct sock *sk)
-{
-	struct inet_connection_sock *icsk = inet_csk(sk);
-
-	if (icsk->icsk_ack.pingpong < U8_MAX)
-		icsk->icsk_ack.pingpong++;
-}
-
 static inline bool inet_csk_has_ulp(struct sock *sk)
 {
 	return inet_sk(sk)->is_icsk && !!inet_csk(sk)->icsk_ulp_ops;
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -167,16 +167,13 @@ static void tcp_event_data_sent(struct t
 	if (tcp_packets_in_flight(tp) == 0)
 		tcp_ca_event(sk, CA_EVENT_TX_START);
 
-	/* If this is the first data packet sent in response to the
-	 * previous received data,
-	 * and it is a reply for ato after last received packet,
-	 * increase pingpong count.
-	 */
-	if (before(tp->lsndtime, icsk->icsk_ack.lrcvtime) &&
-	    (u32)(now - icsk->icsk_ack.lrcvtime) < icsk->icsk_ack.ato)
-		inet_csk_inc_pingpong_cnt(sk);
-
 	tp->lsndtime = now;
+
+	/* If it is a reply for ato after last received
+	 * packet, enter pingpong mode.
+	 */
+	if ((u32)(now - icsk->icsk_ack.lrcvtime) < icsk->icsk_ack.ato)
+		inet_csk_enter_pingpong_mode(sk);
 }
 
 /* Account for an ACK we sent. */

[PATCH 5.10 18/65] tcp: Fix data-races around sysctl_tcp_moderate_rcvbuf.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit 780476488844e070580bfc9e3bc7832ec1cea883 upstream.

While reading sysctl_tcp_moderate_rcvbuf, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    2 +-
 net/mptcp/protocol.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -693,7 +693,7 @@ void tcp_rcv_space_adjust(struct sock *s
 	 * <prev RTT . ><current RTT .. ><next RTT .... >
 	 */
 
-	if (sock_net(sk)->ipv4.sysctl_tcp_moderate_rcvbuf &&
+	if (READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_moderate_rcvbuf) &&
 	    !(sk->sk_userlocks & SOCK_RCVBUF_LOCK)) {
 		int rcvmem, rcvbuf;
 		u64 rcvwin, grow;
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -1421,7 +1421,7 @@ static void mptcp_rcv_space_adjust(struc
 	if (msk->rcvq_space.copied <= msk->rcvq_space.space)
 		goto new_measure;
 
-	if (sock_net(sk)->ipv4.sysctl_tcp_moderate_rcvbuf &&
+	if (READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_moderate_rcvbuf) &&
 	    !(sk->sk_userlocks & SOCK_RCVBUF_LOCK)) {
 		int rcvmem, rcvbuf;
 		u64 rcvwin, grow;

[PATCH 5.10 19/65] tcp: Fix a data-race around sysctl_tcp_limit_output_bytes.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit 9fb90193fbd66b4c5409ef729fd081861f8b6351 upstream.

While reading sysctl_tcp_limit_output_bytes, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 46d3ceabd8d9 ("tcp: TCP Small Queues")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_output.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2499,7 +2499,7 @@ static bool tcp_small_queue_check(struct
 		      sk->sk_pacing_rate >> READ_ONCE(sk->sk_pacing_shift));
 	if (sk->sk_pacing_status == SK_PACING_NONE)
 		limit = min_t(unsigned long, limit,
-			      sock_net(sk)->ipv4.sysctl_tcp_limit_output_bytes);
+			      READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_limit_output_bytes));
 	limit <<= factor;
 
 	if (static_branch_unlikely(&tcp_tx_delay_enabled) &&

[PATCH 5.10 20/65] tcp: Fix a data-race around sysctl_tcp_challenge_ack_limit.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit db3815a2fa691da145cfbe834584f31ad75df9ff upstream.

While reading sysctl_tcp_challenge_ack_limit, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 282f23c6ee34 ("tcp: implement RFC 5961 3.2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3576,7 +3576,7 @@ static void tcp_send_challenge_ack(struc
 	/* Then check host-wide RFC 5961 rate limit. */
 	now = jiffies / HZ;
 	if (now != challenge_timestamp) {
-		u32 ack_limit = net->ipv4.sysctl_tcp_challenge_ack_limit;
+		u32 ack_limit = READ_ONCE(net->ipv4.sysctl_tcp_challenge_ack_limit);
 		u32 half = (ack_limit + 1) >> 1;
 
 		challenge_timestamp = now;

[PATCH 5.10 21/65] net: ping6: Fix memleak in ipv6_renew_options().

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit e27326009a3d247b831eda38878c777f6f4eb3d1 upstream.

When we close ping6 sockets, some resources are left unfreed because
pingv6_prot is missing sk->sk_prot->destroy().  As reported by
syzbot [0], just three syscalls leak 96 bytes and easily cause OOM.

    struct ipv6_sr_hdr *hdr;
    char data[24] = {0};
    int fd;

    hdr = (struct ipv6_sr_hdr *)data;
    hdr->hdrlen = 2;
    hdr->type = IPV6_SRCRT_TYPE_4;

    fd = socket(AF_INET6, SOCK_DGRAM, NEXTHDR_ICMP);
    setsockopt(fd, IPPROTO_IPV6, IPV6_RTHDR, data, 24);
    close(fd);

To fix memory leaks, let's add a destroy function.

Note the socket() syscall checks if the GID is within the range of
net.ipv4.ping_group_range.  The default value is [1, 0] so that no
GID meets the condition (1 <= GID <= 0).  Thus, the local DoS does
not succeed until we change the default value.  However, at least
Ubuntu/Fedora/RHEL loosen it.

    $ cat /usr/lib/sysctl.d/50-default.conf
    ...
    -net.ipv4.ping_group_range = 0 2147483647

Also, there could be another path reported with these options, and
some of them require CAP_NET_RAW.

  setsockopt
      IPV6_ADDRFORM (inet6_sk(sk)->pktoptions)
      IPV6_RECVPATHMTU (inet6_sk(sk)->rxpmtu)
      IPV6_HOPOPTS (inet6_sk(sk)->opt)
      IPV6_RTHDRDSTOPTS (inet6_sk(sk)->opt)
      IPV6_RTHDR (inet6_sk(sk)->opt)
      IPV6_DSTOPTS (inet6_sk(sk)->opt)
      IPV6_2292PKTOPTIONS (inet6_sk(sk)->opt)

  getsockopt
      IPV6_FLOWLABEL_MGR (inet6_sk(sk)->ipv6_fl_list)

For the record, I left a different splat with syzbot's one.

  unreferenced object 0xffff888006270c60 (size 96):
    comm "repro2", pid 231, jiffies 4294696626 (age 13.118s)
    hex dump (first 32 bytes):
      01 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00  ....D...........
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<00000000f6bc7ea9>] sock_kmalloc (net/core/sock.c:2564 net/core/sock.c:2554)
      [<000000006d699550>] do_ipv6_setsockopt.constprop.0 (net/ipv6/ipv6_sockglue.c:715)
      [<00000000c3c3b1f5>] ipv6_setsockopt (net/ipv6/ipv6_sockglue.c:1024)
      [<000000007096a025>] __sys_setsockopt (net/socket.c:2254)
      [<000000003a8ff47b>] __x64_sys_setsockopt (net/socket.c:2265 net/socket.c:2262 net/socket.c:2262)
      [<000000007c409dcb>] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
      [<00000000e939c4a9>] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

[0]: https://syzkaller.appspot.com/bug?extid=a8430774139ec3ab7176

Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.")
Reported-by: syzbot+a8430774139ec3ab7176@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220728012220.46918-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ping.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/net/ipv6/ping.c
+++ b/net/ipv6/ping.c
@@ -22,6 +22,11 @@
 #include <linux/proc_fs.h>
 #include <net/ping.h>
 
+static void ping_v6_destroy(struct sock *sk)
+{
+	inet6_destroy_sock(sk);
+}
+
 /* Compatibility glue so we can support IPv6 when it's compiled as a module */
 static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len,
 				 int *addr_len)
@@ -166,6 +171,7 @@ struct proto pingv6_prot = {
 	.owner =	THIS_MODULE,
 	.init =		ping_init_sock,
 	.close =	ping_close,
+	.destroy =	ping_v6_destroy,
 	.connect =	ip6_datagram_connect_v6_only,
 	.disconnect =	__udp_disconnect,
 	.setsockopt =	ipv6_setsockopt,

[PATCH 5.10 22/65] ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr

[Greg Kroah-Hartman]

From: Ziyang Xuan <william.xuanziyang@huawei.com>

commit 85f0173df35e5462d89947135a6a5599c6c3ef6f upstream.

Change net device's MTU to smaller than IPV6_MIN_MTU or unregister
device while matching route. That may trigger null-ptr-deref bug
for ip6_ptr probability as following.

=========================================================
BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134
Read of size 4 at addr 0000000000000308 by task ping6/263

CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14
Call trace:
 dump_backtrace+0x1a8/0x230
 show_stack+0x20/0x70
 dump_stack_lvl+0x68/0x84
 print_report+0xc4/0x120
 kasan_report+0x84/0x120
 __asan_load4+0x94/0xd0
 find_match.part.0+0x70/0x134
 __find_rr_leaf+0x408/0x470
 fib6_table_lookup+0x264/0x540
 ip6_pol_route+0xf4/0x260
 ip6_pol_route_output+0x58/0x70
 fib6_rule_lookup+0x1a8/0x330
 ip6_route_output_flags_noref+0xd8/0x1a0
 ip6_route_output_flags+0x58/0x160
 ip6_dst_lookup_tail+0x5b4/0x85c
 ip6_dst_lookup_flow+0x98/0x120
 rawv6_sendmsg+0x49c/0xc70
 inet_sendmsg+0x68/0x94

Reproducer as following:
Firstly, prepare conditions:
$ip netns add ns1
$ip netns add ns2
$ip link add veth1 type veth peer name veth2
$ip link set veth1 netns ns1
$ip link set veth2 netns ns2
$ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1
$ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2
$ip netns exec ns1 ifconfig veth1 up
$ip netns exec ns2 ifconfig veth2 up
$ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1
$ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1

Secondly, execute the following two commands in two ssh windows
respectively:
$ip netns exec ns1 sh
$while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done

$ip netns exec ns1 sh
$while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done

It is because ip6_ptr has been assigned to NULL in addrconf_ifdown() firstly,
then ip6_ignore_linkdown() accesses ip6_ptr directly without NULL check.

	cpu0			cpu1
fib6_table_lookup
__find_rr_leaf
			addrconf_notify [ NETDEV_CHANGEMTU ]
			addrconf_ifdown
			RCU_INIT_POINTER(dev->ip6_ptr, NULL)
find_match
ip6_ignore_linkdown

So we can add NULL check for ip6_ptr before using in ip6_ignore_linkdown() to
fix the null-ptr-deref bug.

Fixes: dcd1f572954f ("net/ipv6: Remove fib6_idev")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220728013307.656257-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/addrconf.h |    3 +++
 1 file changed, 3 insertions(+)

--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -405,6 +405,9 @@ static inline bool ip6_ignore_linkdown(c
 {
 	const struct inet6_dev *idev = __in6_dev_get(dev);
 
+	if (unlikely(!idev))
+		return true;
+
 	return !!idev->cnf.ignore_routes_with_linkdown;
 }
 

[PATCH 5.10 23/65] net/tls: Remove the context from the list in tls_device_down

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maximmi@nvidia.com>

commit f6336724a4d4220c89a4ec38bca84b03b178b1a3 upstream.

tls_device_down takes a reference on all contexts it's going to move to
the degraded state (software fallback). If sk_destruct runs afterwards,
it can reduce the reference counter back to 1 and return early without
destroying the context. Then tls_device_down will release the reference
it took and call tls_device_free_ctx. However, the context will still
stay in tls_device_down_list forever. The list will contain an item,
memory for which is released, making a memory corruption possible.

Fix the above bug by properly removing the context from all lists before
any call to tls_device_free_ctx.

Fixes: 3740651bf7e2 ("tls: Fix context leak on tls_device_down")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tls/tls_device.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/net/tls/tls_device.c
+++ b/net/tls/tls_device.c
@@ -1349,8 +1349,13 @@ static int tls_device_down(struct net_de
 		 * by tls_device_free_ctx. rx_conf and tx_conf stay in TLS_HW.
 		 * Now release the ref taken above.
 		 */
-		if (refcount_dec_and_test(&ctx->refcount))
+		if (refcount_dec_and_test(&ctx->refcount)) {
+			/* sk_destruct ran after tls_device_down took a ref, and
+			 * it returned early. Complete the destruction here.
+			 */
+			list_del(&ctx->list);
 			tls_device_free_ctx(ctx);
+		}
 	}
 
 	up_write(&device_offload_lock);

[PATCH 5.10 24/65] igmp: Fix data-races around sysctl_igmp_qrv.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 8ebcc62c738f68688ee7c6fec2efe5bc6d3d7e60 ]

While reading sysctl_igmp_qrv, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

This test can be packed into a helper, so such changes will be in the
follow-up series after net is merged into net-next.

  qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);

Fixes: a9fe8e29945d ("ipv4: implement igmp_qrv sysctl to tune igmp robustness variable")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/igmp.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 428cc3a4c36f..c71b863093ac 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -827,7 +827,7 @@ static void igmp_ifc_event(struct in_device *in_dev)
 	struct net *net = dev_net(in_dev->dev);
 	if (IGMP_V1_SEEN(in_dev) || IGMP_V2_SEEN(in_dev))
 		return;
-	WRITE_ONCE(in_dev->mr_ifc_count, in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv);
+	WRITE_ONCE(in_dev->mr_ifc_count, in_dev->mr_qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv));
 	igmp_ifc_start_timer(in_dev, 1);
 }
 
@@ -1009,7 +1009,7 @@ static bool igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
 		 * received value was zero, use the default or statically
 		 * configured value.
 		 */
-		in_dev->mr_qrv = ih3->qrv ?: net->ipv4.sysctl_igmp_qrv;
+		in_dev->mr_qrv = ih3->qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 		in_dev->mr_qi = IGMPV3_QQIC(ih3->qqic)*HZ ?: IGMP_QUERY_INTERVAL;
 
 		/* RFC3376, 8.3. Query Response Interval:
@@ -1189,7 +1189,7 @@ static void igmpv3_add_delrec(struct in_device *in_dev, struct ip_mc_list *im,
 	pmc->interface = im->interface;
 	in_dev_hold(in_dev);
 	pmc->multiaddr = im->multiaddr;
-	pmc->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+	pmc->crcount = in_dev->mr_qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 	pmc->sfmode = im->sfmode;
 	if (pmc->sfmode == MCAST_INCLUDE) {
 		struct ip_sf_list *psf;
@@ -1240,9 +1240,11 @@ static void igmpv3_del_delrec(struct in_device *in_dev, struct ip_mc_list *im)
 			swap(im->tomb, pmc->tomb);
 			swap(im->sources, pmc->sources);
 			for (psf = im->sources; psf; psf = psf->sf_next)
-				psf->sf_crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+				psf->sf_crcount = in_dev->mr_qrv ?:
+					READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 		} else {
-			im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+			im->crcount = in_dev->mr_qrv ?:
+				READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 		}
 		in_dev_put(pmc->interface);
 		kfree_pmc(pmc);
@@ -1349,7 +1351,7 @@ static void igmp_group_added(struct ip_mc_list *im)
 	if (in_dev->dead)
 		return;
 
-	im->unsolicit_count = net->ipv4.sysctl_igmp_qrv;
+	im->unsolicit_count = READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 	if (IGMP_V1_SEEN(in_dev) || IGMP_V2_SEEN(in_dev)) {
 		spin_lock_bh(&im->lock);
 		igmp_start_timer(im, IGMP_INITIAL_REPORT_DELAY);
@@ -1363,7 +1365,7 @@ static void igmp_group_added(struct ip_mc_list *im)
 	 * IN() to IN(A).
 	 */
 	if (im->sfmode == MCAST_EXCLUDE)
-		im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+		im->crcount = in_dev->mr_qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 
 	igmp_ifc_event(in_dev);
 #endif
@@ -1754,7 +1756,7 @@ static void ip_mc_reset(struct in_device *in_dev)
 
 	in_dev->mr_qi = IGMP_QUERY_INTERVAL;
 	in_dev->mr_qri = IGMP_QUERY_RESPONSE_INTERVAL;
-	in_dev->mr_qrv = net->ipv4.sysctl_igmp_qrv;
+	in_dev->mr_qrv = READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 }
 #else
 static void ip_mc_reset(struct in_device *in_dev)
@@ -1888,7 +1890,7 @@ static int ip_mc_del1_src(struct ip_mc_list *pmc, int sfmode,
 #ifdef CONFIG_IP_MULTICAST
 		if (psf->sf_oldin &&
 		    !IGMP_V1_SEEN(in_dev) && !IGMP_V2_SEEN(in_dev)) {
-			psf->sf_crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+			psf->sf_crcount = in_dev->mr_qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 			psf->sf_next = pmc->tomb;
 			pmc->tomb = psf;
 			rv = 1;
@@ -1952,7 +1954,7 @@ static int ip_mc_del_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
 		/* filter mode change */
 		pmc->sfmode = MCAST_INCLUDE;
 #ifdef CONFIG_IP_MULTICAST
-		pmc->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+		pmc->crcount = in_dev->mr_qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 		WRITE_ONCE(in_dev->mr_ifc_count, pmc->crcount);
 		for (psf = pmc->sources; psf; psf = psf->sf_next)
 			psf->sf_crcount = 0;
@@ -2131,7 +2133,7 @@ static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
 #ifdef CONFIG_IP_MULTICAST
 		/* else no filters; keep old mode for reports */
 
-		pmc->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
+		pmc->crcount = in_dev->mr_qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
 		WRITE_ONCE(in_dev->mr_ifc_count, pmc->crcount);
 		for (psf = pmc->sources; psf; psf = psf->sf_next)
 			psf->sf_crcount = 0;
-- 
2.35.1

[PATCH 5.10 25/65] net: sungem_phy: Add of_node_put() for reference returned by of_get_parent()

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit ebbbe23fdf6070e31509638df3321688358cc211 ]

In bcm5421_init(), we should call of_node_put() for the reference
returned by of_get_parent() which has increased the refcount.

Fixes: 3c326fe9cb7a ("[PATCH] ppc64: Add new PHY to sungem")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220720131003.1287426-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/sungem_phy.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index 291fa449993f..45f295403cb5 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -454,6 +454,7 @@ static int bcm5421_init(struct mii_phy* phy)
 		int can_low_power = 1;
 		if (np == NULL || of_get_property(np, "no-autolowpower", NULL))
 			can_low_power = 0;
+		of_node_put(np);
 		if (can_low_power) {
 			/* Enable automatic low-power */
 			sungem_phy_write(phy, 0x1c, 0x9002);
-- 
2.35.1

[PATCH 5.10 26/65] tcp: Fix a data-race around sysctl_tcp_min_tso_segs.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit e0bb4ab9dfddd872622239f49fb2bd403b70853b ]

While reading sysctl_tcp_min_tso_segs, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 95bd09eb2750 ("tcp: TSO packets automatic sizing")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_output.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 1a144c38039c..657b0a4d9359 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1984,7 +1984,7 @@ static u32 tcp_tso_segs(struct sock *sk, unsigned int mss_now)
 
 	min_tso = ca_ops->min_tso_segs ?
 			ca_ops->min_tso_segs(sk) :
-			sock_net(sk)->ipv4.sysctl_tcp_min_tso_segs;
+			READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_min_tso_segs);
 
 	tso_segs = tcp_tso_autosize(sk, mss_now, min_tso);
 	return min_t(u32, tso_segs, sk->sk_gso_max_segs);
-- 
2.35.1

[PATCH 5.10 27/65] tcp: Fix a data-race around sysctl_tcp_min_rtt_wlen.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 1330ffacd05fc9ac4159d19286ce119e22450ed2 ]

While reading sysctl_tcp_min_rtt_wlen, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: f672258391b4 ("tcp: track min RTT using windowed min-filter")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index c31db58b93a6..79539ef5eb90 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3004,7 +3004,7 @@ static void tcp_fastretrans_alert(struct sock *sk, const u32 prior_snd_una,
 
 static void tcp_update_rtt_min(struct sock *sk, u32 rtt_us, const int flag)
 {
-	u32 wlen = sock_net(sk)->ipv4.sysctl_tcp_min_rtt_wlen * HZ;
+	u32 wlen = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_min_rtt_wlen) * HZ;
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	if ((flag & FLAG_ACK_MAYBE_DELAYED) && rtt_us > tcp_min_rtt(tp)) {
-- 
2.35.1

[PATCH 5.10 28/65] tcp: Fix a data-race around sysctl_tcp_autocorking.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 85225e6f0a76e6745bc841c9f25169c509b573d8 ]

While reading sysctl_tcp_autocorking, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: f54b311142a9 ("tcp: auto corking")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index f1fd26bb199c..78460eb39b3a 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -698,7 +698,7 @@ static bool tcp_should_autocork(struct sock *sk, struct sk_buff *skb,
 				int size_goal)
 {
 	return skb->len < size_goal &&
-	       sock_net(sk)->ipv4.sysctl_tcp_autocorking &&
+	       READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_autocorking) &&
 	       !tcp_rtx_queue_empty(sk) &&
 	       refcount_read(&sk->sk_wmem_alloc) > skb->truesize;
 }
-- 
2.35.1

[PATCH 5.10 29/65] tcp: Fix a data-race around sysctl_tcp_invalid_ratelimit.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 2afdbe7b8de84c28e219073a6661080e1b3ded48 ]

While reading sysctl_tcp_invalid_ratelimit, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 032ee4236954 ("tcp: helpers to mitigate ACK loops by rate-limiting out-of-window dupacks")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_input.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 79539ef5eb90..716bc95ebfb0 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3528,7 +3528,8 @@ static bool __tcp_oow_rate_limited(struct net *net, int mib_idx,
 	if (*last_oow_ack_time) {
 		s32 elapsed = (s32)(tcp_jiffies32 - *last_oow_ack_time);
 
-		if (0 <= elapsed && elapsed < net->ipv4.sysctl_tcp_invalid_ratelimit) {
+		if (0 <= elapsed &&
+		    elapsed < READ_ONCE(net->ipv4.sysctl_tcp_invalid_ratelimit)) {
 			NET_INC_STATS(net, mib_idx);
 			return true;	/* rate-limited: don't send yet! */
 		}
-- 
2.35.1

[PATCH 5.10 30/65] Documentation: fix sctp_wmem in ip-sysctl.rst

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit aa709da0e032cee7c202047ecd75f437bb0126ed ]

Since commit 1033990ac5b2 ("sctp: implement memory accounting on tx path"),
SCTP has supported memory accounting on tx path where 'sctp_wmem' is used
by sk_wmem_schedule(). So we should fix the description for this option in
ip-sysctl.rst accordingly.

v1->v2:
  - Improve the description as Marcelo suggested.

Fixes: 1033990ac5b2 ("sctp: implement memory accounting on tx path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/networking/ip-sysctl.rst | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
index 0b1f3235aa77..0158dff63887 100644
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -2629,7 +2629,14 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 	Default: 4K
 
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
-	Currently this tunable has no effect.
+	Only the first value ("min") is used, "default" and "max" are
+	ignored.
+
+	min: Minimum size of send buffer that can be used by SCTP sockets.
+	It is guaranteed to each SCTP socket (but not association) even
+	under moderate memory pressure.
+
+	Default: 4K
 
 addr_scope_policy - INTEGER
 	Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
-- 
2.35.1

[PATCH 5.10 31/65] macsec: fix NULL deref in macsec_add_rxsa

[Greg Kroah-Hartman]

From: Sabrina Dubroca <sd@queasysnail.net>

[ Upstream commit f46040eeaf2e523a4096199fd93a11e794818009 ]

Commit 48ef50fa866a added a test on tb_sa[MACSEC_SA_ATTR_PN], but
nothing guarantees that it's not NULL at this point. The same code was
added to macsec_add_txsa, but there it's not a problem because
validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is
present.

Note: it's not possible to reproduce with iproute, because iproute
doesn't allow creating an SA without specifying the PN.

Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315
Reported-by: Frantisek Sumsal <fsumsal@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 789a124809e3..0b53c7cadd87 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -1750,7 +1750,8 @@ static int macsec_add_rxsa(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	pn_len = secy->xpn ? MACSEC_XPN_PN_LEN : MACSEC_DEFAULT_PN_LEN;
-	if (nla_len(tb_sa[MACSEC_SA_ATTR_PN]) != pn_len) {
+	if (tb_sa[MACSEC_SA_ATTR_PN] &&
+	    nla_len(tb_sa[MACSEC_SA_ATTR_PN]) != pn_len) {
 		pr_notice("macsec: nl: add_rxsa: bad pn length: %d != %d\n",
 			  nla_len(tb_sa[MACSEC_SA_ATTR_PN]), pn_len);
 		rtnl_unlock();
-- 
2.35.1

[PATCH 5.10 32/65] macsec: fix error message in macsec_add_rxsa and _txsa

[Greg Kroah-Hartman]

From: Sabrina Dubroca <sd@queasysnail.net>

[ Upstream commit 3240eac4ff20e51b87600dbd586ed814daf313db ]

The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT.

Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 0b53c7cadd87..c2d8bcda2503 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -1767,7 +1767,7 @@ static int macsec_add_rxsa(struct sk_buff *skb, struct genl_info *info)
 		if (nla_len(tb_sa[MACSEC_SA_ATTR_SALT]) != MACSEC_SALT_LEN) {
 			pr_notice("macsec: nl: add_rxsa: bad salt length: %d != %d\n",
 				  nla_len(tb_sa[MACSEC_SA_ATTR_SALT]),
-				  MACSEC_SA_ATTR_SALT);
+				  MACSEC_SALT_LEN);
 			rtnl_unlock();
 			return -EINVAL;
 		}
@@ -2009,7 +2009,7 @@ static int macsec_add_txsa(struct sk_buff *skb, struct genl_info *info)
 		if (nla_len(tb_sa[MACSEC_SA_ATTR_SALT]) != MACSEC_SALT_LEN) {
 			pr_notice("macsec: nl: add_txsa: bad salt length: %d != %d\n",
 				  nla_len(tb_sa[MACSEC_SA_ATTR_SALT]),
-				  MACSEC_SA_ATTR_SALT);
+				  MACSEC_SALT_LEN);
 			rtnl_unlock();
 			return -EINVAL;
 		}
-- 
2.35.1

[PATCH 5.10 33/65] macsec: limit replay window size with XPN

[Greg Kroah-Hartman]

From: Sabrina Dubroca <sd@queasysnail.net>

[ Upstream commit b07a0e2044057f201d694ab474f5c42a02b6465b ]

IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value
of the replay window is 2^30-1, to help with recovery of the upper
bits of the PN.

To avoid leaving the existing macsec device in an inconsistent state
if this test fails during changelink, reuse the cleanup mechanism
introduced for HW offload. This wasn't needed until now because
macsec_changelink_common could not fail during changelink, as
modifying the cipher suite was not allowed.

Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so
that secy->xpn is set.

Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index c2d8bcda2503..96dc7bd4813d 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -240,6 +240,7 @@ static struct macsec_cb *macsec_skb_cb(struct sk_buff *skb)
 #define DEFAULT_SEND_SCI true
 #define DEFAULT_ENCRYPT false
 #define DEFAULT_ENCODING_SA 0
+#define MACSEC_XPN_MAX_REPLAY_WINDOW (((1 << 30) - 1))
 
 static bool send_sci(const struct macsec_secy *secy)
 {
@@ -3738,9 +3739,6 @@ static int macsec_changelink_common(struct net_device *dev,
 		secy->operational = tx_sa && tx_sa->active;
 	}
 
-	if (data[IFLA_MACSEC_WINDOW])
-		secy->replay_window = nla_get_u32(data[IFLA_MACSEC_WINDOW]);
-
 	if (data[IFLA_MACSEC_ENCRYPT])
 		tx_sc->encrypt = !!nla_get_u8(data[IFLA_MACSEC_ENCRYPT]);
 
@@ -3786,6 +3784,16 @@ static int macsec_changelink_common(struct net_device *dev,
 		}
 	}
 
+	if (data[IFLA_MACSEC_WINDOW]) {
+		secy->replay_window = nla_get_u32(data[IFLA_MACSEC_WINDOW]);
+
+		/* IEEE 802.1AEbw-2013 10.7.8 - maximum replay window
+		 * for XPN cipher suites */
+		if (secy->xpn &&
+		    secy->replay_window > MACSEC_XPN_MAX_REPLAY_WINDOW)
+			return -EINVAL;
+	}
+
 	return 0;
 }
 
@@ -3815,7 +3823,7 @@ static int macsec_changelink(struct net_device *dev, struct nlattr *tb[],
 
 	ret = macsec_changelink_common(dev, data);
 	if (ret)
-		return ret;
+		goto cleanup;
 
 	/* If h/w offloading is available, propagate to the device */
 	if (macsec_is_offloaded(macsec)) {
-- 
2.35.1

[PATCH 5.10 34/65] macsec: always read MACSEC_SA_ATTR_PN as a u64

[Greg Kroah-Hartman]

From: Sabrina Dubroca <sd@queasysnail.net>

[ Upstream commit c630d1fe6219769049c87d1a6a0e9a6de55328a1 ]

Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a
u32, sometimes forced into a u64 without checking the actual length of
the attribute. Instead, we can use nla_get_u64 everywhere, which will
read up to 64 bits into a u64, capped by the actual length of the
attribute coming from userspace.

This fixes several issues:
 - the check in validate_add_rxsa doesn't work with 32-bit attributes
 - the checks in validate_add_txsa and validate_upd_sa incorrectly
   reject X << 32 (with X != 0)

Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 96dc7bd4813d..8d73b72d6179 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -1695,7 +1695,7 @@ static bool validate_add_rxsa(struct nlattr **attrs)
 		return false;
 
 	if (attrs[MACSEC_SA_ATTR_PN] &&
-	    *(u64 *)nla_data(attrs[MACSEC_SA_ATTR_PN]) == 0)
+	    nla_get_u64(attrs[MACSEC_SA_ATTR_PN]) == 0)
 		return false;
 
 	if (attrs[MACSEC_SA_ATTR_ACTIVE]) {
@@ -1938,7 +1938,7 @@ static bool validate_add_txsa(struct nlattr **attrs)
 	if (nla_get_u8(attrs[MACSEC_SA_ATTR_AN]) >= MACSEC_NUM_AN)
 		return false;
 
-	if (nla_get_u32(attrs[MACSEC_SA_ATTR_PN]) == 0)
+	if (nla_get_u64(attrs[MACSEC_SA_ATTR_PN]) == 0)
 		return false;
 
 	if (attrs[MACSEC_SA_ATTR_ACTIVE]) {
@@ -2292,7 +2292,7 @@ static bool validate_upd_sa(struct nlattr **attrs)
 	if (nla_get_u8(attrs[MACSEC_SA_ATTR_AN]) >= MACSEC_NUM_AN)
 		return false;
 
-	if (attrs[MACSEC_SA_ATTR_PN] && nla_get_u32(attrs[MACSEC_SA_ATTR_PN]) == 0)
+	if (attrs[MACSEC_SA_ATTR_PN] && nla_get_u64(attrs[MACSEC_SA_ATTR_PN]) == 0)
 		return false;
 
 	if (attrs[MACSEC_SA_ATTR_ACTIVE]) {
-- 
2.35.1

[PATCH 5.10 35/65] net: macsec: fix potential resource leak in macsec_add_rxsa() and macsec_add_txsa()

[Greg Kroah-Hartman]

From: Jianglei Nie <niejianglei2021@163.com>

[ Upstream commit c7b205fbbf3cffa374721bb7623f7aa8c46074f1 ]

init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa->
key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error
occurs after init_rx_sa() is called in macsec_add_rxsa(), the function
released rx_sa with kfree() without releasing rx_sa->stats and rx_sa->
key.tfm, which will lead to a resource leak.

We should call macsec_rxsa_put() instead of kfree() to decrease the ref
count of rx_sa and release the relevant resource if the refcount is 0.
The same bug exists in macsec_add_txsa() for tx_sa as well. This patch
fixes the above two bugs.

Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 8d73b72d6179..70c5905a916b 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -1841,7 +1841,7 @@ static int macsec_add_rxsa(struct sk_buff *skb, struct genl_info *info)
 	return 0;
 
 cleanup:
-	kfree(rx_sa);
+	macsec_rxsa_put(rx_sa);
 	rtnl_unlock();
 	return err;
 }
@@ -2084,7 +2084,7 @@ static int macsec_add_txsa(struct sk_buff *skb, struct genl_info *info)
 
 cleanup:
 	secy->operational = was_operational;
-	kfree(tx_sa);
+	macsec_txsa_put(tx_sa);
 	rtnl_unlock();
 	return err;
 }
-- 
2.35.1

[PATCH 5.10 36/65] tcp: Fix a data-race around sysctl_tcp_comp_sack_delay_ns.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 4866b2b0f7672b6d760c4b8ece6fb56f965dcc8a ]

While reading sysctl_tcp_comp_sack_delay_ns, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 6d82aa242092 ("tcp: add tcp_comp_sack_delay_ns sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_input.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 716bc95ebfb0..b86d98c07cdf 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5461,7 +5461,8 @@ static void __tcp_ack_snd_check(struct sock *sk, int ofo_possible)
 	if (tp->srtt_us && tp->srtt_us < rtt)
 		rtt = tp->srtt_us;
 
-	delay = min_t(unsigned long, sock_net(sk)->ipv4.sysctl_tcp_comp_sack_delay_ns,
+	delay = min_t(unsigned long,
+		      READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_comp_sack_delay_ns),
 		      rtt * (NSEC_PER_USEC >> 3)/20);
 	sock_hold(sk);
 	hrtimer_start_range_ns(&tp->compressed_ack_timer, ns_to_ktime(delay),
-- 
2.35.1

[PATCH 5.10 37/65] tcp: Fix a data-race around sysctl_tcp_comp_sack_slack_ns.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 22396941a7f343d704738360f9ef0e6576489d43 ]

While reading sysctl_tcp_comp_sack_slack_ns, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: a70437cc09a1 ("tcp: add hrtimer slack to sack compression")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index b86d98c07cdf..72a339d3f18f 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5466,7 +5466,7 @@ static void __tcp_ack_snd_check(struct sock *sk, int ofo_possible)
 		      rtt * (NSEC_PER_USEC >> 3)/20);
 	sock_hold(sk);
 	hrtimer_start_range_ns(&tp->compressed_ack_timer, ns_to_ktime(delay),
-			       sock_net(sk)->ipv4.sysctl_tcp_comp_sack_slack_ns,
+			       READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_comp_sack_slack_ns),
 			       HRTIMER_MODE_REL_PINNED_SOFT);
 }
 
-- 
2.35.1

[PATCH 5.10 38/65] tcp: Fix a data-race around sysctl_tcp_comp_sack_nr.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 79f55473bfc8ac51bd6572929a679eeb4da22251 ]

While reading sysctl_tcp_comp_sack_nr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 9c21d2fc41c0 ("tcp: add tcp_comp_sack_nr sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 72a339d3f18f..d35e88b5ffcb 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5440,7 +5440,7 @@ static void __tcp_ack_snd_check(struct sock *sk, int ofo_possible)
 	}
 
 	if (!tcp_is_sack(tp) ||
-	    tp->compressed_ack >= sock_net(sk)->ipv4.sysctl_tcp_comp_sack_nr)
+	    tp->compressed_ack >= READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_comp_sack_nr))
 		goto send_now;
 
 	if (tp->compressed_ack_rcv_nxt != tp->rcv_nxt) {
-- 
2.35.1

[PATCH 5.10 39/65] tcp: Fix data-races around sysctl_tcp_reflect_tos.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 870e3a634b6a6cb1543b359007aca73fe6a03ac5 ]

While reading sysctl_tcp_reflect_tos, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: ac8f1710c12b ("tcp: reflect tos value received in SYN to the socket")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_ipv4.c | 4 ++--
 net/ipv6/tcp_ipv6.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index d5f13ff7d900..0d165ce2d80a 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -983,7 +983,7 @@ static int tcp_v4_send_synack(const struct sock *sk, struct dst_entry *dst,
 	if (skb) {
 		__tcp_v4_send_check(skb, ireq->ir_loc_addr, ireq->ir_rmt_addr);
 
-		tos = sock_net(sk)->ipv4.sysctl_tcp_reflect_tos ?
+		tos = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_reflect_tos) ?
 				(tcp_rsk(req)->syn_tos & ~INET_ECN_MASK) |
 				(inet_sk(sk)->tos & INET_ECN_MASK) :
 				inet_sk(sk)->tos;
@@ -1558,7 +1558,7 @@ struct sock *tcp_v4_syn_recv_sock(const struct sock *sk, struct sk_buff *skb,
 	/* Set ToS of the new socket based upon the value of incoming SYN.
 	 * ECT bits are set later in tcp_init_transfer().
 	 */
-	if (sock_net(sk)->ipv4.sysctl_tcp_reflect_tos)
+	if (READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_reflect_tos))
 		newinet->tos = tcp_rsk(req)->syn_tos & ~INET_ECN_MASK;
 
 	if (!dst) {
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 303b54414a6c..8d91f36cb11b 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -542,7 +542,7 @@ static int tcp_v6_send_synack(const struct sock *sk, struct dst_entry *dst,
 		if (np->repflow && ireq->pktopts)
 			fl6->flowlabel = ip6_flowlabel(ipv6_hdr(ireq->pktopts));
 
-		tclass = sock_net(sk)->ipv4.sysctl_tcp_reflect_tos ?
+		tclass = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_reflect_tos) ?
 				(tcp_rsk(req)->syn_tos & ~INET_ECN_MASK) |
 				(np->tclass & INET_ECN_MASK) :
 				np->tclass;
@@ -1344,7 +1344,7 @@ static struct sock *tcp_v6_syn_recv_sock(const struct sock *sk, struct sk_buff *
 	/* Set ToS of the new socket based upon the value of incoming SYN.
 	 * ECT bits are set later in tcp_init_transfer().
 	 */
-	if (sock_net(sk)->ipv4.sysctl_tcp_reflect_tos)
+	if (READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_reflect_tos))
 		newnp->tclass = tcp_rsk(req)->syn_tos & ~INET_ECN_MASK;
 
 	/* Clone native IPv6 options from listening socket (if any)
-- 
2.35.1

[PATCH 5.10 40/65] i40e: Fix interface init with MSI interrupts (no MSI-X)

[Greg Kroah-Hartman]

From: Michal Maloszewski <michal.maloszewski@intel.com>

[ Upstream commit 5fcbb711024aac6d4db385623e6f2fdf019f7782 ]

Fix the inability to bring an interface up on a setup with
only MSI interrupts enabled (no MSI-X).
Solution is to add a default number of QPs = 1. This is enough,
since without MSI-X support driver enables only a basic feature set.

Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 11d4e3ba9af4..1dad62ecb8a3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1907,11 +1907,15 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 		 * non-zero req_queue_pairs says that user requested a new
 		 * queue count via ethtool's set_channels, so use this
 		 * value for queues distribution across traffic classes
+		 * We need at least one queue pair for the interface
+		 * to be usable as we see in else statement.
 		 */
 		if (vsi->req_queue_pairs > 0)
 			vsi->num_queue_pairs = vsi->req_queue_pairs;
 		else if (pf->flags & I40E_FLAG_MSIX_ENABLED)
 			vsi->num_queue_pairs = pf->num_lan_msix;
+		else
+			vsi->num_queue_pairs = 1;
 	}
 
 	/* Number of queues per enabled TC */
-- 
2.35.1

[PATCH 5.10 41/65] sctp: fix sleep in atomic context bug in timer handlers

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit b89fc26f741d9f9efb51cba3e9b241cf1380ec5a ]

There are sleep in atomic context bugs in timer handlers of sctp
such as sctp_generate_t3_rtx_event(), sctp_generate_probe_event(),
sctp_generate_t1_init_event(), sctp_generate_timeout_event(),
sctp_generate_t3_rtx_event() and so on.

The root cause is sctp_sched_prio_init_sid() with GFP_KERNEL parameter
that may sleep could be called by different timer handlers which is in
interrupt context.

One of the call paths that could trigger bug is shown below:

      (interrupt context)
sctp_generate_probe_event
  sctp_do_sm
    sctp_side_effects
      sctp_cmd_interpreter
        sctp_outq_teardown
          sctp_outq_init
            sctp_sched_set_sched
              n->init_sid(..,GFP_KERNEL)
                sctp_sched_prio_init_sid //may sleep

This patch changes gfp_t parameter of init_sid in sctp_sched_set_sched()
from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic
context bugs.

Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20220723015809.11553-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/stream_sched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sctp/stream_sched.c b/net/sctp/stream_sched.c
index 99e5f69fbb74..a2e1d34f52c5 100644
--- a/net/sctp/stream_sched.c
+++ b/net/sctp/stream_sched.c
@@ -163,7 +163,7 @@ int sctp_sched_set_sched(struct sctp_association *asoc,
 		if (!SCTP_SO(&asoc->stream, i)->ext)
 			continue;
 
-		ret = n->init_sid(&asoc->stream, i, GFP_KERNEL);
+		ret = n->init_sid(&asoc->stream, i, GFP_ATOMIC);
 		if (ret)
 			goto err;
 	}
-- 
2.35.1

[PATCH 5.10 42/65] netfilter: nf_queue: do not allow packet truncation below transport header offset

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 99a63d36cb3ed5ca3aa6fcb64cffbeaf3b0fb164 ]

Domingo Dirutigliano and Nicola Guerrera report kernel panic when
sending nf_queue verdict with 1-byte nfta_payload attribute.

The IP/IPv6 stack pulls the IP(v6) header from the packet after the
input hook.

If user truncates the packet below the header size, this skb_pull() will
result in a malformed skb (skb->len < 0).

Fixes: 7af4cc3fa158 ("[NETFILTER]: Add "nfnetlink_queue" netfilter queue handler over nfnetlink")
Reported-by: Domingo Dirutigliano <pwnzer0tt1@proton.me>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nfnetlink_queue.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 1640da5c5077..72d30922ed29 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -838,11 +838,16 @@ nfqnl_enqueue_packet(struct nf_queue_entry *entry, unsigned int queuenum)
 }
 
 static int
-nfqnl_mangle(void *data, int data_len, struct nf_queue_entry *e, int diff)
+nfqnl_mangle(void *data, unsigned int data_len, struct nf_queue_entry *e, int diff)
 {
 	struct sk_buff *nskb;
 
 	if (diff < 0) {
+		unsigned int min_len = skb_transport_offset(e->skb);
+
+		if (data_len < min_len)
+			return -EINVAL;
+
 		if (pskb_trim(e->skb, data_len))
 			return -ENOMEM;
 	} else if (diff > 0) {
-- 
2.35.1

[PATCH 5.10 43/65] virtio-net: fix the race between refill work and close

[Greg Kroah-Hartman]

From: Jason Wang <jasowang@redhat.com>

[ Upstream commit 5a159128faff151b7fe5f4eb0f310b1e0a2d56bf ]

We try using cancel_delayed_work_sync() to prevent the work from
enabling NAPI. This is insufficient since we don't disable the source
of the refill work scheduling. This means an NAPI poll callback after
cancel_delayed_work_sync() can schedule the refill work then can
re-enable the NAPI that leads to use-after-free [1].

Since the work can enable NAPI, we can't simply disable NAPI before
calling cancel_delayed_work_sync(). So fix this by introducing a
dedicated boolean to control whether or not the work could be
scheduled from NAPI.

[1]
==================================================================
BUG: KASAN: use-after-free in refill_work+0x43/0xd4
Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42

CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: events refill_work
Call Trace:
 <TASK>
 dump_stack_lvl+0x34/0x44
 print_report.cold+0xbb/0x6ac
 ? _printk+0xad/0xde
 ? refill_work+0x43/0xd4
 kasan_report+0xa8/0x130
 ? refill_work+0x43/0xd4
 refill_work+0x43/0xd4
 process_one_work+0x43d/0x780
 worker_thread+0x2a0/0x6f0
 ? process_one_work+0x780/0x780
 kthread+0x167/0x1a0
 ? kthread_exit+0x50/0x50
 ret_from_fork+0x22/0x30
 </TASK>
...

Fixes: b2baed69e605c ("virtio_net: set/cancel work on ndo_open/ndo_stop")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/virtio_net.c | 37 ++++++++++++++++++++++++++++++++++---
 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 37178b078ee3..0a07c05a610d 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -213,9 +213,15 @@ struct virtnet_info {
 	/* Packet virtio header size */
 	u8 hdr_len;
 
-	/* Work struct for refilling if we run low on memory. */
+	/* Work struct for delayed refilling if we run low on memory. */
 	struct delayed_work refill;
 
+	/* Is delayed refill enabled? */
+	bool refill_enabled;
+
+	/* The lock to synchronize the access to refill_enabled */
+	spinlock_t refill_lock;
+
 	/* Work struct for config space updates */
 	struct work_struct config_work;
 
@@ -319,6 +325,20 @@ static struct page *get_a_page(struct receive_queue *rq, gfp_t gfp_mask)
 	return p;
 }
 
+static void enable_delayed_refill(struct virtnet_info *vi)
+{
+	spin_lock_bh(&vi->refill_lock);
+	vi->refill_enabled = true;
+	spin_unlock_bh(&vi->refill_lock);
+}
+
+static void disable_delayed_refill(struct virtnet_info *vi)
+{
+	spin_lock_bh(&vi->refill_lock);
+	vi->refill_enabled = false;
+	spin_unlock_bh(&vi->refill_lock);
+}
+
 static void virtqueue_napi_schedule(struct napi_struct *napi,
 				    struct virtqueue *vq)
 {
@@ -1403,8 +1423,12 @@ static int virtnet_receive(struct receive_queue *rq, int budget,
 	}
 
 	if (rq->vq->num_free > min((unsigned int)budget, virtqueue_get_vring_size(rq->vq)) / 2) {
-		if (!try_fill_recv(vi, rq, GFP_ATOMIC))
-			schedule_delayed_work(&vi->refill, 0);
+		if (!try_fill_recv(vi, rq, GFP_ATOMIC)) {
+			spin_lock(&vi->refill_lock);
+			if (vi->refill_enabled)
+				schedule_delayed_work(&vi->refill, 0);
+			spin_unlock(&vi->refill_lock);
+		}
 	}
 
 	u64_stats_update_begin(&rq->stats.syncp);
@@ -1523,6 +1547,8 @@ static int virtnet_open(struct net_device *dev)
 	struct virtnet_info *vi = netdev_priv(dev);
 	int i, err;
 
+	enable_delayed_refill(vi);
+
 	for (i = 0; i < vi->max_queue_pairs; i++) {
 		if (i < vi->curr_queue_pairs)
 			/* Make sure we have some buffers: if oom use wq. */
@@ -1893,6 +1919,8 @@ static int virtnet_close(struct net_device *dev)
 	struct virtnet_info *vi = netdev_priv(dev);
 	int i;
 
+	/* Make sure NAPI doesn't schedule refill work */
+	disable_delayed_refill(vi);
 	/* Make sure refill_work doesn't re-enable napi! */
 	cancel_delayed_work_sync(&vi->refill);
 
@@ -2390,6 +2418,8 @@ static int virtnet_restore_up(struct virtio_device *vdev)
 
 	virtio_device_ready(vdev);
 
+	enable_delayed_refill(vi);
+
 	if (netif_running(vi->dev)) {
 		err = virtnet_open(vi->dev);
 		if (err)
@@ -3092,6 +3122,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 	vdev->priv = vi;
 
 	INIT_WORK(&vi->config_work, virtnet_config_changed_work);
+	spin_lock_init(&vi->refill_lock);
 
 	/* If we can receive ANY GSO packets, we must allocate large ones. */
 	if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
-- 
2.35.1

[PATCH 5.10 44/65] perf symbol: Correct address for bss symbols

[Greg Kroah-Hartman]

From: Leo Yan <leo.yan@linaro.org>

[ Upstream commit 2d86612aacb7805f72873691a2644d7279ed0630 ]

When using 'perf mem' and 'perf c2c', an issue is observed that tool
reports the wrong offset for global data symbols.  This is a common
issue on both x86 and Arm64 platforms.

Let's see an example, for a test program, below is the disassembly for
its .bss section which is dumped with objdump:

  ...

  Disassembly of section .bss:

  0000000000004040 <completed.0>:
  	...

  0000000000004080 <buf1>:
  	...

  00000000000040c0 <buf2>:
  	...

  0000000000004100 <thread>:
  	...

First we used 'perf mem record' to run the test program and then used
'perf --debug verbose=4 mem report' to observe what's the symbol info
for 'buf1' and 'buf2' structures.

  # ./perf mem record -e ldlat-loads,ldlat-stores -- false_sharing.exe 8
  # ./perf --debug verbose=4 mem report
    ...
    dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 sh_addr: 0x4040 sh_offset: 0x3028
    symbol__new: buf2 0x30a8-0x30e8
    ...
    dso__load_sym_internal: adjusting symbol: st_value: 0x4080 sh_addr: 0x4040 sh_offset: 0x3028
    symbol__new: buf1 0x3068-0x30a8
    ...

The perf tool relies on libelf to parse symbols, in executable and
shared object files, 'st_value' holds a virtual address; 'sh_addr' is
the address at which section's first byte should reside in memory, and
'sh_offset' is the byte offset from the beginning of the file to the
first byte in the section.  The perf tool uses below formula to convert
a symbol's memory address to a file address:

  file_address = st_value - sh_addr + sh_offset
                    ^
                    ` Memory address

We can see the final adjusted address ranges for buf1 and buf2 are
[0x30a8-0x30e8) and [0x3068-0x30a8) respectively, apparently this is
incorrect, in the code, the structure for 'buf1' and 'buf2' specifies
compiler attribute with 64-byte alignment.

The problem happens for 'sh_offset', libelf returns it as 0x3028 which
is not 64-byte aligned, combining with disassembly, it's likely libelf
doesn't respect the alignment for .bss section, therefore, it doesn't
return the aligned value for 'sh_offset'.

Suggested by Fangrui Song, ELF file contains program header which
contains PT_LOAD segments, the fields p_vaddr and p_offset in PT_LOAD
segments contain the execution info.  A better choice for converting
memory address to file address is using the formula:

  file_address = st_value - p_vaddr + p_offset

This patch introduces elf_read_program_header() which returns the
program header based on the passed 'st_value', then it uses the formula
above to calculate the symbol file address; and the debugging log is
updated respectively.

After applying the change:

  # ./perf --debug verbose=4 mem report
    ...
    dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 p_vaddr: 0x3d28 p_offset: 0x2d28
    symbol__new: buf2 0x30c0-0x3100
    ...
    dso__load_sym_internal: adjusting symbol: st_value: 0x4080 p_vaddr: 0x3d28 p_offset: 0x2d28
    symbol__new: buf1 0x3080-0x30c0
    ...

Fixes: f17e04afaff84b5c ("perf report: Fix ELF symbol parsing")
Reported-by: Chang Rui <changruinj@gmail.com>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220724060013.171050-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/symbol-elf.c | 45 ++++++++++++++++++++++++++++++++----
 1 file changed, 41 insertions(+), 4 deletions(-)

diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 94809aed8b44..1cab29d45bfb 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -232,6 +232,33 @@ Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep,
 	return NULL;
 }
 
+static int elf_read_program_header(Elf *elf, u64 vaddr, GElf_Phdr *phdr)
+{
+	size_t i, phdrnum;
+	u64 sz;
+
+	if (elf_getphdrnum(elf, &phdrnum))
+		return -1;
+
+	for (i = 0; i < phdrnum; i++) {
+		if (gelf_getphdr(elf, i, phdr) == NULL)
+			return -1;
+
+		if (phdr->p_type != PT_LOAD)
+			continue;
+
+		sz = max(phdr->p_memsz, phdr->p_filesz);
+		if (!sz)
+			continue;
+
+		if (vaddr >= phdr->p_vaddr && (vaddr < phdr->p_vaddr + sz))
+			return 0;
+	}
+
+	/* Not found any valid program header */
+	return -1;
+}
+
 static bool want_demangle(bool is_kernel_sym)
 {
 	return is_kernel_sym ? symbol_conf.demangle_kernel : symbol_conf.demangle;
@@ -1181,6 +1208,7 @@ int dso__load_sym(struct dso *dso, struct map *map, struct symsrc *syms_ss,
 					sym.st_value);
 			used_opd = true;
 		}
+
 		/*
 		 * When loading symbols in a data mapping, ABS symbols (which
 		 * has a value of SHN_ABS in its st_shndx) failed at
@@ -1217,11 +1245,20 @@ int dso__load_sym(struct dso *dso, struct map *map, struct symsrc *syms_ss,
 				goto out_elf_end;
 		} else if ((used_opd && runtime_ss->adjust_symbols) ||
 			   (!used_opd && syms_ss->adjust_symbols)) {
+			GElf_Phdr phdr;
+
+			if (elf_read_program_header(syms_ss->elf,
+						    (u64)sym.st_value, &phdr)) {
+				pr_warning("%s: failed to find program header for "
+					   "symbol: %s st_value: %#" PRIx64 "\n",
+					   __func__, elf_name, (u64)sym.st_value);
+				continue;
+			}
 			pr_debug4("%s: adjusting symbol: st_value: %#" PRIx64 " "
-				  "sh_addr: %#" PRIx64 " sh_offset: %#" PRIx64 "\n", __func__,
-				  (u64)sym.st_value, (u64)shdr.sh_addr,
-				  (u64)shdr.sh_offset);
-			sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+				  "p_vaddr: %#" PRIx64 " p_offset: %#" PRIx64 "\n",
+				  __func__, (u64)sym.st_value, (u64)phdr.p_vaddr,
+				  (u64)phdr.p_offset);
+			sym.st_value -= phdr.p_vaddr - phdr.p_offset;
 		}
 
 		demangled = demangle_sym(dso, kmodule, elf_name);
-- 
2.35.1

[PATCH 5.10 45/65] sfc: disable softirqs for ptp TX

[Greg Kroah-Hartman]

From: Alejandro Lucero <alejandro.lucero-palau@amd.com>

[ Upstream commit 67c3b611d92fc238c43734878bc3e232ab570c79 ]

Sending a PTP packet can imply to use the normal TX driver datapath but
invoked from the driver's ptp worker. The kernel generic TX code
disables softirqs and preemption before calling specific driver TX code,
but the ptp worker does not. Although current ptp driver functionality
does not require it, there are several reasons for doing so:

   1) The invoked code is always executed with softirqs disabled for non
      PTP packets.
   2) Better if a ptp packet transmission is not interrupted by softirq
      handling which could lead to high latencies.
   3) netdev_xmit_more used by the TX code requires preemption to be
      disabled.

Indeed a solution for dealing with kernel preemption state based on static
kernel configuration is not possible since the introduction of dynamic
preemption level configuration at boot time using the static calls
functionality.

Fixes: f79c957a0b537 ("drivers: net: sfc: use netdev_xmit_more helper")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ptp.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index 725b0f38813a..a2b4e3befa59 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -1100,7 +1100,29 @@ static void efx_ptp_xmit_skb_queue(struct efx_nic *efx, struct sk_buff *skb)
 
 	tx_queue = efx_channel_get_tx_queue(ptp_data->channel, type);
 	if (tx_queue && tx_queue->timestamping) {
+		/* This code invokes normal driver TX code which is always
+		 * protected from softirqs when called from generic TX code,
+		 * which in turn disables preemption. Look at __dev_queue_xmit
+		 * which uses rcu_read_lock_bh disabling preemption for RCU
+		 * plus disabling softirqs. We do not need RCU reader
+		 * protection here.
+		 *
+		 * Although it is theoretically safe for current PTP TX/RX code
+		 * running without disabling softirqs, there are three good
+		 * reasond for doing so:
+		 *
+		 *      1) The code invoked is mainly implemented for non-PTP
+		 *         packets and it is always executed with softirqs
+		 *         disabled.
+		 *      2) This being a single PTP packet, better to not
+		 *         interrupt its processing by softirqs which can lead
+		 *         to high latencies.
+		 *      3) netdev_xmit_more checks preemption is disabled and
+		 *         triggers a BUG_ON if not.
+		 */
+		local_bh_disable();
 		efx_enqueue_skb(tx_queue, skb);
+		local_bh_enable();
 	} else {
 		WARN_ONCE(1, "PTP channel has no timestamped tx queue\n");
 		dev_kfree_skb_any(skb);
-- 
2.35.1

[PATCH 5.10 46/65] sctp: leave the err path free in sctp_stream_init to sctp_stream_free

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 181d8d2066c000ba0a0e6940a7ad80f1a0e68e9d ]

A NULL pointer dereference was reported by Wei Chen:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  RIP: 0010:__list_del_entry_valid+0x26/0x80
  Call Trace:
   <TASK>
   sctp_sched_dequeue_common+0x1c/0x90
   sctp_sched_prio_dequeue+0x67/0x80
   __sctp_outq_teardown+0x299/0x380
   sctp_outq_free+0x15/0x20
   sctp_association_free+0xc3/0x440
   sctp_do_sm+0x1ca7/0x2210
   sctp_assoc_bh_rcv+0x1f6/0x340

This happens when calling sctp_sendmsg without connecting to server first.
In this case, a data chunk already queues up in send queue of client side
when processing the INIT_ACK from server in sctp_process_init() where it
calls sctp_stream_init() to alloc stream_in. If it fails to alloc stream_in
all stream_out will be freed in sctp_stream_init's err path. Then in the
asoc freeing it will crash when dequeuing this data chunk as stream_out
is missing.

As we can't free stream out before dequeuing all data from send queue, and
this patch is to fix it by moving the err path stream_out/in freeing in
sctp_stream_init() to sctp_stream_free() which is eventually called when
freeing the asoc in sctp_association_free(). This fix also makes the code
in sctp_process_init() more clear.

Note that in sctp_association_init() when it fails in sctp_stream_init(),
sctp_association_free() will not be called, and in that case it should
go to 'stream_free' err path to free stream instead of 'fail_init'.

Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/831a3dc100c4908ff76e5bcc363be97f2778bc0b.1658787066.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/associola.c |  5 ++---
 net/sctp/stream.c    | 19 +++----------------
 2 files changed, 5 insertions(+), 19 deletions(-)

diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index fdb69d46276d..2d4ec6187755 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -226,9 +226,8 @@ static struct sctp_association *sctp_association_init(
 	if (!sctp_ulpq_init(&asoc->ulpq, asoc))
 		goto fail_init;
 
-	if (sctp_stream_init(&asoc->stream, asoc->c.sinit_num_ostreams,
-			     0, gfp))
-		goto fail_init;
+	if (sctp_stream_init(&asoc->stream, asoc->c.sinit_num_ostreams, 0, gfp))
+		goto stream_free;
 
 	/* Initialize default path MTU. */
 	asoc->pathmtu = sp->pathmtu;
diff --git a/net/sctp/stream.c b/net/sctp/stream.c
index 6dc95dcc0ff4..ef9fceadef8d 100644
--- a/net/sctp/stream.c
+++ b/net/sctp/stream.c
@@ -137,7 +137,7 @@ int sctp_stream_init(struct sctp_stream *stream, __u16 outcnt, __u16 incnt,
 
 	ret = sctp_stream_alloc_out(stream, outcnt, gfp);
 	if (ret)
-		goto out_err;
+		return ret;
 
 	for (i = 0; i < stream->outcnt; i++)
 		SCTP_SO(stream, i)->state = SCTP_STREAM_OPEN;
@@ -145,22 +145,9 @@ int sctp_stream_init(struct sctp_stream *stream, __u16 outcnt, __u16 incnt,
 handle_in:
 	sctp_stream_interleave_init(stream);
 	if (!incnt)
-		goto out;
-
-	ret = sctp_stream_alloc_in(stream, incnt, gfp);
-	if (ret)
-		goto in_err;
-
-	goto out;
+		return 0;
 
-in_err:
-	sched->free(stream);
-	genradix_free(&stream->in);
-out_err:
-	genradix_free(&stream->out);
-	stream->outcnt = 0;
-out:
-	return ret;
+	return sctp_stream_alloc_in(stream, incnt, gfp);
 }
 
 int sctp_stream_init_ext(struct sctp_stream *stream, __u16 sid)
-- 
2.35.1

[PATCH 5.10 47/65] ARM: crypto: comment out gcc warning that breaks clang builds

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The gcc build warning prevents all clang-built kernels from working
properly, so comment it out to fix the build.

This is a -stable kernel only patch for now, it will be resolved
differently in mainline releases in the future.

Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: "Justin M. Forbes" <jforbes@fedoraproject.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/lib/xor-neon.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/arm/lib/xor-neon.c
+++ b/arch/arm/lib/xor-neon.c
@@ -26,8 +26,9 @@ MODULE_LICENSE("GPL");
  * While older versions of GCC do not generate incorrect code, they fail to
  * recognize the parallel nature of these functions, and emit plain ARM code,
  * which is known to be slower than the optimized ARM code in asm-arm/xor.h.
+ *
+ * #warning This code requires at least version 4.6 of GCC
  */
-#warning This code requires at least version 4.6 of GCC
 #endif
 
 #pragma GCC diagnostic ignored "-Wunused-variable"

[PATCH 5.10 48/65] page_alloc: fix invalid watermark check on a negative value

[Greg Kroah-Hartman]

From: Jaewon Kim <jaewon31.kim@samsung.com>

commit 9282012fc0aa248b77a69f5eb802b67c5a16bb13 upstream.

There was a report that a task is waiting at the
throttle_direct_reclaim. The pgscan_direct_throttle in vmstat was
increasing.

This is a bug where zone_watermark_fast returns true even when the free
is very low. The commit f27ce0e14088 ("page_alloc: consider highatomic
reserve in watermark fast") changed the watermark fast to consider
highatomic reserve. But it did not handle a negative value case which
can be happened when reserved_highatomic pageblock is bigger than the
actual free.

If watermark is considered as ok for the negative value, allocating
contexts for order-0 will consume all free pages without direct reclaim,
and finally free page may become depleted except highatomic free.

Then allocating contexts may fall into throttle_direct_reclaim. This
symptom may easily happen in a system where wmark min is low and other
reclaimers like kswapd does not make free pages quickly.

Handle the negative case by using MIN.

Link: https://lkml.kernel.org/r/20220725095212.25388-1-jaewon31.kim@samsung.com
Fixes: f27ce0e14088 ("page_alloc: consider highatomic reserve in watermark fast")
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Reported-by: GyeongHwan Hong <gh21.hong@samsung.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yong-Taek Lee <ytk.lee@samsung.com>
Cc: <stable@vger.kerenl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/page_alloc.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3679,11 +3679,15 @@ static inline bool zone_watermark_fast(s
 	 * need to be calculated.
 	 */
 	if (!order) {
-		long fast_free;
+		long usable_free;
+		long reserved;
 
-		fast_free = free_pages;
-		fast_free -= __zone_watermark_unusable_free(z, 0, alloc_flags);
-		if (fast_free > mark + z->lowmem_reserve[highest_zoneidx])
+		usable_free = free_pages;
+		reserved = __zone_watermark_unusable_free(z, 0, alloc_flags);
+
+		/* reserved may over estimate high-atomic reserves. */
+		usable_free -= min(usable_free, reserved);
+		if (usable_free > mark + z->lowmem_reserve[highest_zoneidx])
 			return true;
 	}
 

[PATCH 5.10 49/65] mt7601u: add USB device ID for some versions of XiaoDu WiFi Dongle.

[Greg Kroah-Hartman]

From: Wei Mingzhi <whistler@member.fsf.org>

commit 829eea7c94e0bac804e65975639a2f2e5f147033 upstream.

USB device ID of some versions of XiaoDu WiFi Dongle is 2955:1003
instead of 2955:1001. Both are the same mt7601u hardware.

Signed-off-by: Wei Mingzhi <whistler@member.fsf.org>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210618160840.305024-1-whistler@member.fsf.org
Cc: Yan Xinyu <sdlyyxy@bupt.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/mediatek/mt7601u/usb.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/mediatek/mt7601u/usb.c
+++ b/drivers/net/wireless/mediatek/mt7601u/usb.c
@@ -26,6 +26,7 @@ static const struct usb_device_id mt7601
 	{ USB_DEVICE(0x2717, 0x4106) },
 	{ USB_DEVICE(0x2955, 0x0001) },
 	{ USB_DEVICE(0x2955, 0x1001) },
+	{ USB_DEVICE(0x2955, 0x1003) },
 	{ USB_DEVICE(0x2a5f, 0x1000) },
 	{ USB_DEVICE(0x7392, 0x7710) },
 	{ 0, }

[PATCH 5.10 50/65] ARM: 9216/1: Fix MAX_DMA_ADDRESS overflow

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit fb0fd3469ead5b937293c213daa1f589b4b7ce46 ]

Commit 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
added a check to determine whether arm_dma_zone_size is exceeding the
amount of kernel virtual address space available between the upper 4GB
virtual address limit and PAGE_OFFSET in order to provide a suitable
definition of MAX_DMA_ADDRESS that should fit within the 32-bit virtual
address space. The quantity used for comparison was off by a missing
trailing 0, leading to MAX_DMA_ADDRESS to be overflowing a 32-bit
quantity.

This was caught thanks to CONFIG_DEBUG_VIRTUAL on the bcm2711 platform
where we define a dma_zone_size of 1GB and we have a PAGE_OFFSET value
of 0xc000_0000 (CONFIG_VMSPLIT_3G) leading to MAX_DMA_ADDRESS being
0x1_0000_0000 which overflows the unsigned long type used throughout
__pa() and then __virt_addr_valid(). Because the virtual address passed
to __virt_addr_valid() would now be 0, the function would loudly warn
and flood the kernel log, thus making the platform unable to boot
properly.

Fixes: 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/dma.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index a81dda65c576..45180a2cc47c 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -10,7 +10,7 @@
 #else
 #define MAX_DMA_ADDRESS	({ \
 	extern phys_addr_t arm_dma_zone_size; \
-	arm_dma_zone_size && arm_dma_zone_size < (0x10000000 - PAGE_OFFSET) ? \
+	arm_dma_zone_size && arm_dma_zone_size < (0x100000000ULL - PAGE_OFFSET) ? \
 		(PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; })
 #endif
 
-- 
2.35.1

[PATCH 5.10 51/65] EDAC/ghes: Set the DIMM label unconditionally

[Greg Kroah-Hartman]

From: Toshi Kani <toshi.kani@hpe.com>

commit 5e2805d5379619c4a2e3ae4994e73b36439f4bad upstream.

The commit

  cb51a371d08e ("EDAC/ghes: Setup DIMM label from DMI and use it in error reports")

enforced that both the bank and device strings passed to
dimm_setup_label() are not NULL.

However, there are BIOSes, for example on a

  HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 03/15/2019

which don't populate both strings:

  Handle 0x0020, DMI type 17, 84 bytes
  Memory Device
          Array Handle: 0x0013
          Error Information Handle: Not Provided
          Total Width: 72 bits
          Data Width: 64 bits
          Size: 32 GB
          Form Factor: DIMM
          Set: None
          Locator: PROC 1 DIMM 1        <===== device
          Bank Locator: Not Specified   <===== bank

This results in a buffer overflow because ghes_edac_register() calls
strlen() on an uninitialized label, which had non-zero values left over
from krealloc_array():

  detected buffer overflow in __fortify_strlen
   ------------[ cut here ]------------
   kernel BUG at lib/string_helpers.c:983!
   invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
   CPU: 1 PID: 1 Comm: swapper/0 Tainted: G          I       5.18.6-200.fc36.x86_64 #1
   Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 03/15/2019
   RIP: 0010:fortify_panic
   ...
   Call Trace:
    <TASK>
    ghes_edac_register.cold
    ghes_probe
    platform_probe
    really_probe
    __driver_probe_device
    driver_probe_device
    __driver_attach
    ? __device_attach_driver
    bus_for_each_dev
    bus_add_driver
    driver_register
    acpi_ghes_init
    acpi_init
    ? acpi_sleep_proc_init
    do_one_initcall

The label contains garbage because the commit in Fixes reallocs the
DIMMs array while scanning the system but doesn't clear the newly
allocated memory.

Change dimm_setup_label() to always initialize the label to fix the
issue. Set it to the empty string in case BIOS does not provide both
bank and device so that ghes_edac_register() can keep the default label
given by edac_mc_alloc_dimms().

  [ bp: Rewrite commit message. ]

Fixes: b9cae27728d1f ("EDAC/ghes: Scan the system once on driver init")
Co-developed-by: Robert Richter <rric@kernel.org>
Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Robert Elliott <elliott@hpe.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220719220124.760359-1-toshi.kani@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/ghes_edac.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/drivers/edac/ghes_edac.c
+++ b/drivers/edac/ghes_edac.c
@@ -101,9 +101,14 @@ static void dimm_setup_label(struct dimm
 
 	dmi_memdev_name(handle, &bank, &device);
 
-	/* both strings must be non-zero */
-	if (bank && *bank && device && *device)
-		snprintf(dimm->label, sizeof(dimm->label), "%s %s", bank, device);
+	/*
+	 * Set to a NULL string when both bank and device are zero. In this case,
+	 * the label assigned by default will be preserved.
+	 */
+	snprintf(dimm->label, sizeof(dimm->label), "%s%s%s",
+		 (bank && *bank) ? bank : "",
+		 (bank && *bank && device && *device) ? " " : "",
+		 (device && *device) ? device : "");
 }
 
 static void assign_dmi_dimm_info(struct dimm_info *dimm, struct memdev_dmi_entry *entry)

[PATCH 5.10 52/65] docs/kernel-parameters: Update descriptions for "mitigations=" param with retbleed

[Greg Kroah-Hartman]

From: Eiichi Tsukata <eiichi.tsukata@nutanix.com>

commit ea304a8b89fd0d6cf94ee30cb139dc23d9f1a62f upstream.

Updates descriptions for "mitigations=off" and "mitigations=auto,nosmt"
with the respective retbleed= settings.

Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: corbet@lwn.net
Link: https://lore.kernel.org/r/20220728043907.165688-1-eiichi.tsukata@nutanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/admin-guide/kernel-parameters.txt |    2 ++
 1 file changed, 2 insertions(+)

--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2873,6 +2873,7 @@
 					       no_entry_flush [PPC]
 					       no_uaccess_flush [PPC]
 					       mmio_stale_data=off [X86]
+					       retbleed=off [X86]
 
 				Exceptions:
 					       This does not have any effect on
@@ -2895,6 +2896,7 @@
 					       mds=full,nosmt [X86]
 					       tsx_async_abort=full,nosmt [X86]
 					       mmio_stale_data=full,nosmt [X86]
+					       retbleed=auto,nosmt [X86]
 
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this

[PATCH 5.10 53/65] xfs: refactor xfs_file_fsync

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

commit f22c7f87777361f94aa17f746fbadfa499248dc8 upstream.

[backported for dependency]

Factor out the log syncing logic into two helpers to make the code easier
to read and more maintainable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/xfs_file.c |   81 +++++++++++++++++++++++++++++++++---------------------
 1 file changed, 50 insertions(+), 31 deletions(-)

--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -118,6 +118,54 @@ xfs_dir_fsync(
 	return xfs_log_force_inode(ip);
 }
 
+static xfs_lsn_t
+xfs_fsync_lsn(
+	struct xfs_inode	*ip,
+	bool			datasync)
+{
+	if (!xfs_ipincount(ip))
+		return 0;
+	if (datasync && !(ip->i_itemp->ili_fsync_fields & ~XFS_ILOG_TIMESTAMP))
+		return 0;
+	return ip->i_itemp->ili_last_lsn;
+}
+
+/*
+ * All metadata updates are logged, which means that we just have to flush the
+ * log up to the latest LSN that touched the inode.
+ *
+ * If we have concurrent fsync/fdatasync() calls, we need them to all block on
+ * the log force before we clear the ili_fsync_fields field. This ensures that
+ * we don't get a racing sync operation that does not wait for the metadata to
+ * hit the journal before returning.  If we race with clearing ili_fsync_fields,
+ * then all that will happen is the log force will do nothing as the lsn will
+ * already be on disk.  We can't race with setting ili_fsync_fields because that
+ * is done under XFS_ILOCK_EXCL, and that can't happen because we hold the lock
+ * shared until after the ili_fsync_fields is cleared.
+ */
+static  int
+xfs_fsync_flush_log(
+	struct xfs_inode	*ip,
+	bool			datasync,
+	int			*log_flushed)
+{
+	int			error = 0;
+	xfs_lsn_t		lsn;
+
+	xfs_ilock(ip, XFS_ILOCK_SHARED);
+	lsn = xfs_fsync_lsn(ip, datasync);
+	if (lsn) {
+		error = xfs_log_force_lsn(ip->i_mount, lsn, XFS_LOG_SYNC,
+					  log_flushed);
+
+		spin_lock(&ip->i_itemp->ili_lock);
+		ip->i_itemp->ili_fsync_fields = 0;
+		spin_unlock(&ip->i_itemp->ili_lock);
+	}
+	xfs_iunlock(ip, XFS_ILOCK_SHARED);
+	return error;
+}
+
 STATIC int
 xfs_file_fsync(
 	struct file		*file,
@@ -125,13 +173,10 @@ xfs_file_fsync(
 	loff_t			end,
 	int			datasync)
 {
-	struct inode		*inode = file->f_mapping->host;
-	struct xfs_inode	*ip = XFS_I(inode);
-	struct xfs_inode_log_item *iip = ip->i_itemp;
+	struct xfs_inode	*ip = XFS_I(file->f_mapping->host);
 	struct xfs_mount	*mp = ip->i_mount;
 	int			error = 0;
 	int			log_flushed = 0;
-	xfs_lsn_t		lsn = 0;
 
 	trace_xfs_file_fsync(ip);
 
@@ -155,33 +200,7 @@ xfs_file_fsync(
 	else if (mp->m_logdev_targp != mp->m_ddev_targp)
 		xfs_blkdev_issue_flush(mp->m_ddev_targp);
 
-	/*
-	 * All metadata updates are logged, which means that we just have to
-	 * flush the log up to the latest LSN that touched the inode. If we have
-	 * concurrent fsync/fdatasync() calls, we need them to all block on the
-	 * log force before we clear the ili_fsync_fields field. This ensures
-	 * that we don't get a racing sync operation that does not wait for the
-	 * metadata to hit the journal before returning. If we race with
-	 * clearing the ili_fsync_fields, then all that will happen is the log
-	 * force will do nothing as the lsn will already be on disk. We can't
-	 * race with setting ili_fsync_fields because that is done under
-	 * XFS_ILOCK_EXCL, and that can't happen because we hold the lock shared
-	 * until after the ili_fsync_fields is cleared.
-	 */
-	xfs_ilock(ip, XFS_ILOCK_SHARED);
-	if (xfs_ipincount(ip)) {
-		if (!datasync ||
-		    (iip->ili_fsync_fields & ~XFS_ILOG_TIMESTAMP))
-			lsn = iip->ili_last_lsn;
-	}
-
-	if (lsn) {
-		error = xfs_log_force_lsn(mp, lsn, XFS_LOG_SYNC, &log_flushed);
-		spin_lock(&iip->ili_lock);
-		iip->ili_fsync_fields = 0;
-		spin_unlock(&iip->ili_lock);
-	}
-	xfs_iunlock(ip, XFS_ILOCK_SHARED);
+	error = xfs_fsync_flush_log(ip, datasync, &log_flushed);
 
 	/*
 	 * If we only have a single device, and the log force about was

[PATCH 5.10 54/65] xfs: xfs_log_force_lsn isnt passed a LSN

[Greg Kroah-Hartman]

From: Dave Chinner <dchinner@redhat.com>

commit 5f9b4b0de8dc2fb8eb655463b438001c111570fe upstream.

[backported from CIL scalability series for dependency]

In doing an investigation into AIL push stalls, I was looking at the
log force code to see if an async CIL push could be done instead.
This lead me to xfs_log_force_lsn() and looking at how it works.

xfs_log_force_lsn() is only called from inode synchronisation
contexts such as fsync(), and it takes the ip->i_itemp->ili_last_lsn
value as the LSN to sync the log to. This gets passed to
xlog_cil_force_lsn() via xfs_log_force_lsn() to flush the CIL to the
journal, and then used by xfs_log_force_lsn() to flush the iclogs to
the journal.

The problem is that ip->i_itemp->ili_last_lsn does not store a
log sequence number. What it stores is passed to it from the
->iop_committing method, which is called by xfs_log_commit_cil().
The value this passes to the iop_committing method is the CIL
context sequence number that the item was committed to.

As it turns out, xlog_cil_force_lsn() converts the sequence to an
actual commit LSN for the related context and returns that to
xfs_log_force_lsn(). xfs_log_force_lsn() overwrites it's "lsn"
variable that contained a sequence with an actual LSN and then uses
that to sync the iclogs.

This caused me some confusion for a while, even though I originally
wrote all this code a decade ago. ->iop_committing is only used by
a couple of log item types, and only inode items use the sequence
number it is passed.

Let's clean up the API, CIL structures and inode log item to call it
a sequence number, and make it clear that the high level code is
using CIL sequence numbers and not on-disk LSNs for integrity
synchronisation purposes.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/libxfs/xfs_types.h |    1 +
 fs/xfs/xfs_buf_item.c     |    2 +-
 fs/xfs/xfs_dquot_item.c   |    2 +-
 fs/xfs/xfs_file.c         |   14 +++++++-------
 fs/xfs/xfs_inode.c        |   10 +++++-----
 fs/xfs/xfs_inode_item.c   |    4 ++--
 fs/xfs/xfs_inode_item.h   |    2 +-
 fs/xfs/xfs_log.c          |   27 ++++++++++++++-------------
 fs/xfs/xfs_log.h          |    4 +---
 fs/xfs/xfs_log_cil.c      |   30 +++++++++++-------------------
 fs/xfs/xfs_log_priv.h     |   15 +++++++--------
 fs/xfs/xfs_trans.c        |    6 +++---
 fs/xfs/xfs_trans.h        |    4 ++--
 13 files changed, 56 insertions(+), 65 deletions(-)

--- a/fs/xfs/libxfs/xfs_types.h
+++ b/fs/xfs/libxfs/xfs_types.h
@@ -21,6 +21,7 @@ typedef int32_t		xfs_suminfo_t;	/* type
 typedef uint32_t	xfs_rtword_t;	/* word type for bitmap manipulations */
 
 typedef int64_t		xfs_lsn_t;	/* log sequence number */
+typedef int64_t		xfs_csn_t;	/* CIL sequence number */
 
 typedef uint32_t	xfs_dablk_t;	/* dir/attr block number (in file) */
 typedef uint32_t	xfs_dahash_t;	/* dir/attr hash value */
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -632,7 +632,7 @@ xfs_buf_item_release(
 STATIC void
 xfs_buf_item_committing(
 	struct xfs_log_item	*lip,
-	xfs_lsn_t		commit_lsn)
+	xfs_csn_t		seq)
 {
 	return xfs_buf_item_release(lip);
 }
--- a/fs/xfs/xfs_dquot_item.c
+++ b/fs/xfs/xfs_dquot_item.c
@@ -188,7 +188,7 @@ xfs_qm_dquot_logitem_release(
 STATIC void
 xfs_qm_dquot_logitem_committing(
 	struct xfs_log_item	*lip,
-	xfs_lsn_t		commit_lsn)
+	xfs_csn_t		seq)
 {
 	return xfs_qm_dquot_logitem_release(lip);
 }
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -118,8 +118,8 @@ xfs_dir_fsync(
 	return xfs_log_force_inode(ip);
 }
 
-static xfs_lsn_t
-xfs_fsync_lsn(
+static xfs_csn_t
+xfs_fsync_seq(
 	struct xfs_inode	*ip,
 	bool			datasync)
 {
@@ -127,7 +127,7 @@ xfs_fsync_lsn(
 		return 0;
 	if (datasync && !(ip->i_itemp->ili_fsync_fields & ~XFS_ILOG_TIMESTAMP))
 		return 0;
-	return ip->i_itemp->ili_last_lsn;
+	return ip->i_itemp->ili_commit_seq;
 }
 
 /*
@@ -150,12 +150,12 @@ xfs_fsync_flush_log(
 	int			*log_flushed)
 {
 	int			error = 0;
-	xfs_lsn_t		lsn;
+	xfs_csn_t		seq;
 
 	xfs_ilock(ip, XFS_ILOCK_SHARED);
-	lsn = xfs_fsync_lsn(ip, datasync);
-	if (lsn) {
-		error = xfs_log_force_lsn(ip->i_mount, lsn, XFS_LOG_SYNC,
+	seq = xfs_fsync_seq(ip, datasync);
+	if (seq) {
+		error = xfs_log_force_seq(ip->i_mount, seq, XFS_LOG_SYNC,
 					  log_flushed);
 
 		spin_lock(&ip->i_itemp->ili_lock);
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2754,7 +2754,7 @@ xfs_iunpin(
 	trace_xfs_inode_unpin_nowait(ip, _RET_IP_);
 
 	/* Give the log a push to start the unpinning I/O */
-	xfs_log_force_lsn(ip->i_mount, ip->i_itemp->ili_last_lsn, 0, NULL);
+	xfs_log_force_seq(ip->i_mount, ip->i_itemp->ili_commit_seq, 0, NULL);
 
 }
 
@@ -3716,16 +3716,16 @@ int
 xfs_log_force_inode(
 	struct xfs_inode	*ip)
 {
-	xfs_lsn_t		lsn = 0;
+	xfs_csn_t		seq = 0;
 
 	xfs_ilock(ip, XFS_ILOCK_SHARED);
 	if (xfs_ipincount(ip))
-		lsn = ip->i_itemp->ili_last_lsn;
+		seq = ip->i_itemp->ili_commit_seq;
 	xfs_iunlock(ip, XFS_ILOCK_SHARED);
 
-	if (!lsn)
+	if (!seq)
 		return 0;
-	return xfs_log_force_lsn(ip->i_mount, lsn, XFS_LOG_SYNC, NULL);
+	return xfs_log_force_seq(ip->i_mount, seq, XFS_LOG_SYNC, NULL);
 }
 
 /*
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -617,9 +617,9 @@ xfs_inode_item_committed(
 STATIC void
 xfs_inode_item_committing(
 	struct xfs_log_item	*lip,
-	xfs_lsn_t		commit_lsn)
+	xfs_csn_t		seq)
 {
-	INODE_ITEM(lip)->ili_last_lsn = commit_lsn;
+	INODE_ITEM(lip)->ili_commit_seq = seq;
 	return xfs_inode_item_release(lip);
 }
 
--- a/fs/xfs/xfs_inode_item.h
+++ b/fs/xfs/xfs_inode_item.h
@@ -33,7 +33,7 @@ struct xfs_inode_log_item {
 	unsigned int		ili_fields;	   /* fields to be logged */
 	unsigned int		ili_fsync_fields;  /* logged since last fsync */
 	xfs_lsn_t		ili_flush_lsn;	   /* lsn at last flush */
-	xfs_lsn_t		ili_last_lsn;	   /* lsn at last transaction */
+	xfs_csn_t		ili_commit_seq;	   /* last transaction commit */
 };
 
 static inline int xfs_inode_clean(struct xfs_inode *ip)
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -3210,14 +3210,13 @@ out_error:
 }
 
 static int
-__xfs_log_force_lsn(
-	struct xfs_mount	*mp,
+xlog_force_lsn(
+	struct xlog		*log,
 	xfs_lsn_t		lsn,
 	uint			flags,
 	int			*log_flushed,
 	bool			already_slept)
 {
-	struct xlog		*log = mp->m_log;
 	struct xlog_in_core	*iclog;
 
 	spin_lock(&log->l_icloglock);
@@ -3250,8 +3249,6 @@ __xfs_log_force_lsn(
 		if (!already_slept &&
 		    (iclog->ic_prev->ic_state == XLOG_STATE_WANT_SYNC ||
 		     iclog->ic_prev->ic_state == XLOG_STATE_SYNCING)) {
-			XFS_STATS_INC(mp, xs_log_force_sleep);
-
 			xlog_wait(&iclog->ic_prev->ic_write_wait,
 					&log->l_icloglock);
 			return -EAGAIN;
@@ -3289,25 +3286,29 @@ out_error:
  * to disk, that thread will wake up all threads waiting on the queue.
  */
 int
-xfs_log_force_lsn(
+xfs_log_force_seq(
 	struct xfs_mount	*mp,
-	xfs_lsn_t		lsn,
+	xfs_csn_t		seq,
 	uint			flags,
 	int			*log_flushed)
 {
+	struct xlog		*log = mp->m_log;
+	xfs_lsn_t		lsn;
 	int			ret;
-	ASSERT(lsn != 0);
+	ASSERT(seq != 0);
 
 	XFS_STATS_INC(mp, xs_log_force);
-	trace_xfs_log_force(mp, lsn, _RET_IP_);
+	trace_xfs_log_force(mp, seq, _RET_IP_);
 
-	lsn = xlog_cil_force_lsn(mp->m_log, lsn);
+	lsn = xlog_cil_force_seq(log, seq);
 	if (lsn == NULLCOMMITLSN)
 		return 0;
 
-	ret = __xfs_log_force_lsn(mp, lsn, flags, log_flushed, false);
-	if (ret == -EAGAIN)
-		ret = __xfs_log_force_lsn(mp, lsn, flags, log_flushed, true);
+	ret = xlog_force_lsn(log, lsn, flags, log_flushed, false);
+	if (ret == -EAGAIN) {
+		XFS_STATS_INC(mp, xs_log_force_sleep);
+		ret = xlog_force_lsn(log, lsn, flags, log_flushed, true);
+	}
 	return ret;
 }
 
--- a/fs/xfs/xfs_log.h
+++ b/fs/xfs/xfs_log.h
@@ -106,7 +106,7 @@ struct xfs_item_ops;
 struct xfs_trans;
 
 int	  xfs_log_force(struct xfs_mount *mp, uint flags);
-int	  xfs_log_force_lsn(struct xfs_mount *mp, xfs_lsn_t lsn, uint flags,
+int	  xfs_log_force_seq(struct xfs_mount *mp, xfs_csn_t seq, uint flags,
 		int *log_forced);
 int	  xfs_log_mount(struct xfs_mount	*mp,
 			struct xfs_buftarg	*log_target,
@@ -132,8 +132,6 @@ bool	xfs_log_writable(struct xfs_mount *
 struct xlog_ticket *xfs_log_ticket_get(struct xlog_ticket *ticket);
 void	  xfs_log_ticket_put(struct xlog_ticket *ticket);
 
-void	xfs_log_commit_cil(struct xfs_mount *mp, struct xfs_trans *tp,
-				xfs_lsn_t *commit_lsn, bool regrant);
 void	xlog_cil_process_committed(struct list_head *list);
 bool	xfs_log_item_in_current_chkpt(struct xfs_log_item *lip);
 
--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -777,7 +777,7 @@ xlog_cil_push_work(
 	 * that higher sequences will wait for us to write out a commit record
 	 * before they do.
 	 *
-	 * xfs_log_force_lsn requires us to mirror the new sequence into the cil
+	 * xfs_log_force_seq requires us to mirror the new sequence into the cil
 	 * structure atomically with the addition of this sequence to the
 	 * committing list. This also ensures that we can do unlocked checks
 	 * against the current sequence in log forces without risking
@@ -1020,16 +1020,14 @@ xlog_cil_empty(
  * allowed again.
  */
 void
-xfs_log_commit_cil(
-	struct xfs_mount	*mp,
+xlog_cil_commit(
+	struct xlog		*log,
 	struct xfs_trans	*tp,
-	xfs_lsn_t		*commit_lsn,
+	xfs_csn_t		*commit_seq,
 	bool			regrant)
 {
-	struct xlog		*log = mp->m_log;
 	struct xfs_cil		*cil = log->l_cilp;
 	struct xfs_log_item	*lip, *next;
-	xfs_lsn_t		xc_commit_lsn;
 
 	/*
 	 * Do all necessary memory allocation before we lock the CIL.
@@ -1043,10 +1041,6 @@ xfs_log_commit_cil(
 
 	xlog_cil_insert_items(log, tp);
 
-	xc_commit_lsn = cil->xc_ctx->sequence;
-	if (commit_lsn)
-		*commit_lsn = xc_commit_lsn;
-
 	if (regrant && !XLOG_FORCED_SHUTDOWN(log))
 		xfs_log_ticket_regrant(log, tp->t_ticket);
 	else
@@ -1069,8 +1063,10 @@ xfs_log_commit_cil(
 	list_for_each_entry_safe(lip, next, &tp->t_items, li_trans) {
 		xfs_trans_del_item(lip);
 		if (lip->li_ops->iop_committing)
-			lip->li_ops->iop_committing(lip, xc_commit_lsn);
+			lip->li_ops->iop_committing(lip, cil->xc_ctx->sequence);
 	}
+	if (commit_seq)
+		*commit_seq = cil->xc_ctx->sequence;
 
 	/* xlog_cil_push_background() releases cil->xc_ctx_lock */
 	xlog_cil_push_background(log);
@@ -1087,9 +1083,9 @@ xfs_log_commit_cil(
  * iclog flush is necessary following this call.
  */
 xfs_lsn_t
-xlog_cil_force_lsn(
+xlog_cil_force_seq(
 	struct xlog	*log,
-	xfs_lsn_t	sequence)
+	xfs_csn_t	sequence)
 {
 	struct xfs_cil		*cil = log->l_cilp;
 	struct xfs_cil_ctx	*ctx;
@@ -1185,21 +1181,17 @@ bool
 xfs_log_item_in_current_chkpt(
 	struct xfs_log_item *lip)
 {
-	struct xfs_cil_ctx *ctx;
+	struct xfs_cil_ctx *ctx = lip->li_mountp->m_log->l_cilp->xc_ctx;
 
 	if (list_empty(&lip->li_cil))
 		return false;
 
-	ctx = lip->li_mountp->m_log->l_cilp->xc_ctx;
-
 	/*
 	 * li_seq is written on the first commit of a log item to record the
 	 * first checkpoint it is written to. Hence if it is different to the
 	 * current sequence, we're in a new checkpoint.
 	 */
-	if (XFS_LSN_CMP(lip->li_seq, ctx->sequence) != 0)
-		return false;
-	return true;
+	return lip->li_seq == ctx->sequence;
 }
 
 /*
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -230,7 +230,7 @@ struct xfs_cil;
 
 struct xfs_cil_ctx {
 	struct xfs_cil		*cil;
-	xfs_lsn_t		sequence;	/* chkpt sequence # */
+	xfs_csn_t		sequence;	/* chkpt sequence # */
 	xfs_lsn_t		start_lsn;	/* first LSN of chkpt commit */
 	xfs_lsn_t		commit_lsn;	/* chkpt commit record lsn */
 	struct xlog_ticket	*ticket;	/* chkpt ticket */
@@ -268,10 +268,10 @@ struct xfs_cil {
 	struct xfs_cil_ctx	*xc_ctx;
 
 	spinlock_t		xc_push_lock ____cacheline_aligned_in_smp;
-	xfs_lsn_t		xc_push_seq;
+	xfs_csn_t		xc_push_seq;
 	struct list_head	xc_committing;
 	wait_queue_head_t	xc_commit_wait;
-	xfs_lsn_t		xc_current_sequence;
+	xfs_csn_t		xc_current_sequence;
 	struct work_struct	xc_push_work;
 	wait_queue_head_t	xc_push_wait;	/* background push throttle */
 } ____cacheline_aligned_in_smp;
@@ -547,19 +547,18 @@ int	xlog_cil_init(struct xlog *log);
 void	xlog_cil_init_post_recovery(struct xlog *log);
 void	xlog_cil_destroy(struct xlog *log);
 bool	xlog_cil_empty(struct xlog *log);
+void	xlog_cil_commit(struct xlog *log, struct xfs_trans *tp,
+			xfs_csn_t *commit_seq, bool regrant);
 
 /*
  * CIL force routines
  */
-xfs_lsn_t
-xlog_cil_force_lsn(
-	struct xlog *log,
-	xfs_lsn_t sequence);
+xfs_lsn_t xlog_cil_force_seq(struct xlog *log, xfs_csn_t sequence);
 
 static inline void
 xlog_cil_force(struct xlog *log)
 {
-	xlog_cil_force_lsn(log, log->l_cilp->xc_current_sequence);
+	xlog_cil_force_seq(log, log->l_cilp->xc_current_sequence);
 }
 
 /*
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -832,7 +832,7 @@ __xfs_trans_commit(
 	bool			regrant)
 {
 	struct xfs_mount	*mp = tp->t_mountp;
-	xfs_lsn_t		commit_lsn = -1;
+	xfs_csn_t		commit_seq = 0;
 	int			error = 0;
 	int			sync = tp->t_flags & XFS_TRANS_SYNC;
 
@@ -874,7 +874,7 @@ __xfs_trans_commit(
 		xfs_trans_apply_sb_deltas(tp);
 	xfs_trans_apply_dquot_deltas(tp);
 
-	xfs_log_commit_cil(mp, tp, &commit_lsn, regrant);
+	xlog_cil_commit(mp->m_log, tp, &commit_seq, regrant);
 
 	xfs_trans_free(tp);
 
@@ -883,7 +883,7 @@ __xfs_trans_commit(
 	 * log out now and wait for it.
 	 */
 	if (sync) {
-		error = xfs_log_force_lsn(mp, commit_lsn, XFS_LOG_SYNC, NULL);
+		error = xfs_log_force_seq(mp, commit_seq, XFS_LOG_SYNC, NULL);
 		XFS_STATS_INC(mp, xs_trans_sync);
 	} else {
 		XFS_STATS_INC(mp, xs_trans_async);
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -43,7 +43,7 @@ struct xfs_log_item {
 	struct list_head		li_cil;		/* CIL pointers */
 	struct xfs_log_vec		*li_lv;		/* active log vector */
 	struct xfs_log_vec		*li_lv_shadow;	/* standby vector */
-	xfs_lsn_t			li_seq;		/* CIL commit seq */
+	xfs_csn_t			li_seq;		/* CIL commit seq */
 };
 
 /*
@@ -69,7 +69,7 @@ struct xfs_item_ops {
 	void (*iop_pin)(struct xfs_log_item *);
 	void (*iop_unpin)(struct xfs_log_item *, int remove);
 	uint (*iop_push)(struct xfs_log_item *, struct list_head *);
-	void (*iop_committing)(struct xfs_log_item *, xfs_lsn_t commit_lsn);
+	void (*iop_committing)(struct xfs_log_item *lip, xfs_csn_t seq);
 	void (*iop_release)(struct xfs_log_item *);
 	xfs_lsn_t (*iop_committed)(struct xfs_log_item *, xfs_lsn_t);
 	int (*iop_recover)(struct xfs_log_item *lip,

[PATCH 5.10 55/65] xfs: prevent UAF in xfs_log_item_in_current_chkpt

[Greg Kroah-Hartman]

From: "Darrick J. Wong" <djwong@kernel.org>

commit f8d92a66e810acbef6ddbc0bd0cbd9b117ce8acd upstream.

While I was running with KASAN and lockdep enabled, I stumbled upon an
KASAN report about a UAF to a freed CIL checkpoint.  Looking at the
comment for xfs_log_item_in_current_chkpt, it seems pretty obvious to me
that the original patch to xfs_defer_finish_noroll should have done
something to lock the CIL to prevent it from switching the CIL contexts
while the predicate runs.

For upper level code that needs to know if a given log item is new
enough not to need relogging, add a new wrapper that takes the CIL
context lock long enough to sample the current CIL context.  This is
kind of racy in that the CIL can switch the contexts immediately after
sampling, but that's ok because the consequence is that the defer ops
code is a little slow to relog items.

 ==================================================================
 BUG: KASAN: use-after-free in xfs_log_item_in_current_chkpt+0x139/0x160 [xfs]
 Read of size 8 at addr ffff88804ea5f608 by task fsstress/527999

 CPU: 1 PID: 527999 Comm: fsstress Tainted: G      D      5.16.0-rc4-xfsx #rc4
 Call Trace:
  <TASK>
  dump_stack_lvl+0x45/0x59
  print_address_description.constprop.0+0x1f/0x140
  kasan_report.cold+0x83/0xdf
  xfs_log_item_in_current_chkpt+0x139/0x160
  xfs_defer_finish_noroll+0x3bb/0x1e30
  __xfs_trans_commit+0x6c8/0xcf0
  xfs_reflink_remap_extent+0x66f/0x10e0
  xfs_reflink_remap_blocks+0x2dd/0xa90
  xfs_file_remap_range+0x27b/0xc30
  vfs_dedupe_file_range_one+0x368/0x420
  vfs_dedupe_file_range+0x37c/0x5d0
  do_vfs_ioctl+0x308/0x1260
  __x64_sys_ioctl+0xa1/0x170
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f2c71a2950b
 Code: 0f 1e fa 48 8b 05 85 39 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d 55 39 0d 00 f7 d8 64 89 01 48
 RSP: 002b:00007ffe8c0e03c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
 RAX: ffffffffffffffda RBX: 00005600862a8740 RCX: 00007f2c71a2950b
 RDX: 00005600862a7be0 RSI: 00000000c0189436 RDI: 0000000000000004
 RBP: 000000000000000b R08: 0000000000000027 R09: 0000000000000003
 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000005a
 R13: 00005600862804a8 R14: 0000000000016000 R15: 00005600862a8a20
  </TASK>

 Allocated by task 464064:
  kasan_save_stack+0x1e/0x50
  __kasan_kmalloc+0x81/0xa0
  kmem_alloc+0xcd/0x2c0 [xfs]
  xlog_cil_ctx_alloc+0x17/0x1e0 [xfs]
  xlog_cil_push_work+0x141/0x13d0 [xfs]
  process_one_work+0x7f6/0x1380
  worker_thread+0x59d/0x1040
  kthread+0x3b0/0x490
  ret_from_fork+0x1f/0x30

 Freed by task 51:
  kasan_save_stack+0x1e/0x50
  kasan_set_track+0x21/0x30
  kasan_set_free_info+0x20/0x30
  __kasan_slab_free+0xed/0x130
  slab_free_freelist_hook+0x7f/0x160
  kfree+0xde/0x340
  xlog_cil_committed+0xbfd/0xfe0 [xfs]
  xlog_cil_process_committed+0x103/0x1c0 [xfs]
  xlog_state_do_callback+0x45d/0xbd0 [xfs]
  xlog_ioend_work+0x116/0x1c0 [xfs]
  process_one_work+0x7f6/0x1380
  worker_thread+0x59d/0x1040
  kthread+0x3b0/0x490
  ret_from_fork+0x1f/0x30

 Last potentially related work creation:
  kasan_save_stack+0x1e/0x50
  __kasan_record_aux_stack+0xb7/0xc0
  insert_work+0x48/0x2e0
  __queue_work+0x4e7/0xda0
  queue_work_on+0x69/0x80
  xlog_cil_push_now.isra.0+0x16b/0x210 [xfs]
  xlog_cil_force_seq+0x1b7/0x850 [xfs]
  xfs_log_force_seq+0x1c7/0x670 [xfs]
  xfs_file_fsync+0x7c1/0xa60 [xfs]
  __x64_sys_fsync+0x52/0x80
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 The buggy address belongs to the object at ffff88804ea5f600
  which belongs to the cache kmalloc-256 of size 256
 The buggy address is located 8 bytes inside of
  256-byte region [ffff88804ea5f600, ffff88804ea5f700)
 The buggy address belongs to the page:
 page:ffffea00013a9780 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88804ea5ea00 pfn:0x4ea5e
 head:ffffea00013a9780 order:1 compound_mapcount:0
 flags: 0x4fff80000010200(slab|head|node=1|zone=1|lastcpupid=0xfff)
 raw: 04fff80000010200 ffffea0001245908 ffffea00011bd388 ffff888004c42b40
 raw: ffff88804ea5ea00 0000000000100009 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff88804ea5f500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff88804ea5f580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 >ffff88804ea5f600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                       ^
  ffff88804ea5f680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff88804ea5f700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ==================================================================

Fixes: 4e919af7827a ("xfs: periodically relog deferred intent items")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/xfs_log_cil.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -1179,9 +1179,9 @@ out_shutdown:
  */
 bool
 xfs_log_item_in_current_chkpt(
-	struct xfs_log_item *lip)
+	struct xfs_log_item	*lip)
 {
-	struct xfs_cil_ctx *ctx = lip->li_mountp->m_log->l_cilp->xc_ctx;
+	struct xfs_cil		*cil = lip->li_mountp->m_log->l_cilp;
 
 	if (list_empty(&lip->li_cil))
 		return false;
@@ -1191,7 +1191,7 @@ xfs_log_item_in_current_chkpt(
 	 * first checkpoint it is written to. Hence if it is different to the
 	 * current sequence, we're in a new checkpoint.
 	 */
-	return lip->li_seq == ctx->sequence;
+	return lip->li_seq == READ_ONCE(cil->xc_current_sequence);
 }
 
 /*

[PATCH 5.10 56/65] xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes

[Greg Kroah-Hartman]

From: "Darrick J. Wong" <djwong@kernel.org>

commit 81ed94751b1513fcc5978dcc06eb1f5b4e55a785 upstream.

During regular operation, the xfs_inactive operations create
transactions with zero block reservation because in general we're
freeing space, not asking for more.  The per-AG space reservations
created at mount time enable us to handle expansions of the refcount
btree without needing to reserve blocks to the transaction.

Unfortunately, log recovery doesn't create the per-AG space reservations
when intent items are being recovered.  This isn't an issue for intent
item recovery itself because they explicitly request blocks, but any
inode inactivation that can happen during log recovery uses the same
xfs_inactive paths as regular runtime.  If a refcount btree expansion
happens, the transaction will fail due to blk_res_used > blk_res, and we
shut down the filesystem unnecessarily.

Fix this problem by making per-AG reservations temporarily so that we
can handle the inactivations, and releasing them at the end.  This
brings the recovery environment closer to the runtime environment.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/xfs_mount.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -968,9 +968,17 @@ xfs_mountfs(
 	/*
 	 * Finish recovering the file system.  This part needed to be delayed
 	 * until after the root and real-time bitmap inodes were consistently
-	 * read in.
+	 * read in.  Temporarily create per-AG space reservations for metadata
+	 * btree shape changes because space freeing transactions (for inode
+	 * inactivation) require the per-AG reservation in lieu of reserving
+	 * blocks.
 	 */
+	error = xfs_fs_reserve_ag_blocks(mp);
+	if (error && error == -ENOSPC)
+		xfs_warn(mp,
+	"ENOSPC reserving per-AG metadata pool, log recovery may fail.");
 	error = xfs_log_mount_finish(mp);
+	xfs_fs_unreserve_ag_blocks(mp);
 	if (error) {
 		xfs_warn(mp, "log mount finish failed");
 		goto out_rtunmount;

[PATCH 5.10 57/65] xfs: force the log offline when log intent item recovery fails

[Greg Kroah-Hartman]

From: "Darrick J. Wong" <djwong@kernel.org>

commit 4e6b8270c820c8c57a73f869799a0af2b56eff3e upstream.

If any part of log intent item recovery fails, we should shut down the
log immediately to stop the log from writing a clean unmount record to
disk, because the metadata is not consistent.  The inability to cancel a
dirty transaction catches most of these cases, but there are a few
things that have slipped through the cracks, such as ENOSPC from a
transaction allocation, or runtime errors that result in cancellation of
a non-dirty transaction.

This solves some weird behaviors reported by customers where a system
goes down, the first mount fails, the second succeeds, but then the fs
goes down later because of inconsistent metadata.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/xfs_log.c         |    3 +++
 fs/xfs/xfs_log_recover.c |    5 ++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -765,6 +765,9 @@ xfs_log_mount_finish(
 	if (readonly)
 		mp->m_flags |= XFS_MOUNT_RDONLY;
 
+	/* Make sure the log is dead if we're returning failure. */
+	ASSERT(!error || (mp->m_log->l_flags & XLOG_IO_ERROR));
+
 	return error;
 }
 
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -2457,8 +2457,10 @@ xlog_finish_defer_ops(
 
 		error = xfs_trans_alloc(mp, &resv, dfc->dfc_blkres,
 				dfc->dfc_rtxres, XFS_TRANS_RESERVE, &tp);
-		if (error)
+		if (error) {
+			xfs_force_shutdown(mp, SHUTDOWN_LOG_IO_ERROR);
 			return error;
+		}
 
 		/*
 		 * Transfer to this new transaction all the dfops we captured
@@ -3454,6 +3456,7 @@ xlog_recover_finish(
 			 * this) before we get around to xfs_log_mount_cancel.
 			 */
 			xlog_recover_cancel_intents(log);
+			xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR);
 			xfs_alert(log->l_mp, "Failed to recover intents");
 			return error;
 		}

[PATCH 5.10 58/65] xfs: hold buffer across unpin and potential shutdown processing

[Greg Kroah-Hartman]

From: Brian Foster <bfoster@redhat.com>

commit 84d8949e770745b16a7e8a68dcb1d0f3687bdee9 upstream.

The special processing used to simulate a buffer I/O failure on fs
shutdown has a difficult to reproduce race that can result in a use
after free of the associated buffer. Consider a buffer that has been
committed to the on-disk log and thus is AIL resident. The buffer
lands on the writeback delwri queue, but is subsequently locked,
committed and pinned by another transaction before submitted for
I/O. At this point, the buffer is stuck on the delwri queue as it
cannot be submitted for I/O until it is unpinned. A log checkpoint
I/O failure occurs sometime later, which aborts the bli. The unpin
handler is called with the aborted log item, drops the bli reference
count, the pin count, and falls into the I/O failure simulation
path.

The potential problem here is that once the pin count falls to zero
in ->iop_unpin(), xfsaild is free to retry delwri submission of the
buffer at any time, before the unpin handler even completes. If
delwri queue submission wins the race to the buffer lock, it
observes the shutdown state and simulates the I/O failure itself.
This releases both the bli and delwri queue holds and frees the
buffer while xfs_buf_item_unpin() sits on xfs_buf_lock() waiting to
run through the same failure sequence. This problem is rare and
requires many iterations of fstest generic/019 (which simulates disk
I/O failures) to reproduce.

To avoid this problem, grab a hold on the buffer before the log item
is unpinned if the associated item has been aborted and will require
a simulated I/O failure. The hold is already required for the
simulated I/O failure, so the ordering simply guarantees the unpin
handler access to the buffer before it is unpinned and thus
processed by the AIL. This particular ordering is required so long
as the AIL does not acquire a reference on the bli, which is the
long term solution to this problem.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/xfs_buf_item.c |   37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -393,17 +393,8 @@ xfs_buf_item_pin(
 }
 
 /*
- * This is called to unpin the buffer associated with the buf log
- * item which was previously pinned with a call to xfs_buf_item_pin().
- *
- * Also drop the reference to the buf item for the current transaction.
- * If the XFS_BLI_STALE flag is set and we are the last reference,
- * then free up the buf log item and unlock the buffer.
- *
- * If the remove flag is set we are called from uncommit in the
- * forced-shutdown path.  If that is true and the reference count on
- * the log item is going to drop to zero we need to free the item's
- * descriptor in the transaction.
+ * This is called to unpin the buffer associated with the buf log item which
+ * was previously pinned with a call to xfs_buf_item_pin().
  */
 STATIC void
 xfs_buf_item_unpin(
@@ -420,12 +411,26 @@ xfs_buf_item_unpin(
 
 	trace_xfs_buf_item_unpin(bip);
 
+	/*
+	 * Drop the bli ref associated with the pin and grab the hold required
+	 * for the I/O simulation failure in the abort case. We have to do this
+	 * before the pin count drops because the AIL doesn't acquire a bli
+	 * reference. Therefore if the refcount drops to zero, the bli could
+	 * still be AIL resident and the buffer submitted for I/O (and freed on
+	 * completion) at any point before we return. This can be removed once
+	 * the AIL properly holds a reference on the bli.
+	 */
 	freed = atomic_dec_and_test(&bip->bli_refcount);
-
+	if (freed && !stale && remove)
+		xfs_buf_hold(bp);
 	if (atomic_dec_and_test(&bp->b_pin_count))
 		wake_up_all(&bp->b_waiters);
 
-	if (freed && stale) {
+	 /* nothing to do but drop the pin count if the bli is active */
+	if (!freed)
+		return;
+
+	if (stale) {
 		ASSERT(bip->bli_flags & XFS_BLI_STALE);
 		ASSERT(xfs_buf_islocked(bp));
 		ASSERT(bp->b_flags & XBF_STALE);
@@ -468,13 +473,13 @@ xfs_buf_item_unpin(
 			ASSERT(bp->b_log_item == NULL);
 		}
 		xfs_buf_relse(bp);
-	} else if (freed && remove) {
+	} else if (remove) {
 		/*
 		 * The buffer must be locked and held by the caller to simulate
-		 * an async I/O failure.
+		 * an async I/O failure. We acquired the hold for this case
+		 * before the buffer was unpinned.
 		 */
 		xfs_buf_lock(bp);
-		xfs_buf_hold(bp);
 		bp->b_flags |= XBF_ASYNC;
 		xfs_buf_ioend_fail(bp);
 	}

[PATCH 5.10 59/65] xfs: remove dead stale buf unpin handling code

[Greg Kroah-Hartman]

From: Brian Foster <bfoster@redhat.com>

commit e53d3aa0b605c49d780e1b2fd0b49dba4154f32b upstream.

This code goes back to a time when transaction commits wrote
directly to iclogs. The associated log items were pinned, written to
the log, and then "uncommitted" if some part of the log write had
failed. This uncommit sequence called an ->iop_unpin_remove()
handler that was eventually folded into ->iop_unpin() via the remove
parameter. The log subsystem has since changed significantly in that
transactions commit to the CIL instead of direct to iclogs, though
log items must still be aborted in the event of an eventual log I/O
error. However, the context for a log item abort is now asynchronous
from transaction commit, which means the committing transaction has
been freed by this point in time and the transaction uncommit
sequence of events is no longer relevant.

Further, since stale buffers remain locked at transaction commit
through unpin, we can be certain that the buffer is not associated
with any transaction when the unpin callback executes. Remove this
unused hunk of code and replace it with an assertion that the buffer
is disassociated from transaction context.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/xfs_buf_item.c |   21 ++-------------------
 1 file changed, 2 insertions(+), 19 deletions(-)

--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -435,28 +435,11 @@ xfs_buf_item_unpin(
 		ASSERT(xfs_buf_islocked(bp));
 		ASSERT(bp->b_flags & XBF_STALE);
 		ASSERT(bip->__bli_format.blf_flags & XFS_BLF_CANCEL);
+		ASSERT(list_empty(&lip->li_trans));
+		ASSERT(!bp->b_transp);
 
 		trace_xfs_buf_item_unpin_stale(bip);
 
-		if (remove) {
-			/*
-			 * If we are in a transaction context, we have to
-			 * remove the log item from the transaction as we are
-			 * about to release our reference to the buffer.  If we
-			 * don't, the unlock that occurs later in
-			 * xfs_trans_uncommit() will try to reference the
-			 * buffer which we no longer have a hold on.
-			 */
-			if (!list_empty(&lip->li_trans))
-				xfs_trans_del_item(lip);
-
-			/*
-			 * Since the transaction no longer refers to the buffer,
-			 * the buffer should no longer refer to the transaction.
-			 */
-			bp->b_transp = NULL;
-		}
-
 		/*
 		 * If we get called here because of an IO error, we may or may
 		 * not have the item on the AIL. xfs_trans_ail_delete() will

[PATCH 5.10 60/65] xfs: logging the on disk inode LSN can make it go backwards

[Greg Kroah-Hartman]

From: Dave Chinner <dchinner@redhat.com>

commit 32baa63d82ee3f5ab3bd51bae6bf7d1c15aed8c7 upstream.

When we log an inode, we format the "log inode" core and set an LSN
in that inode core. We do that via xfs_inode_item_format_core(),
which calls:

	xfs_inode_to_log_dinode(ip, dic, ip->i_itemp->ili_item.li_lsn);

to format the log inode. It writes the LSN from the inode item into
the log inode, and if recovery decides the inode item needs to be
replayed, it recovers the log inode LSN field and writes it into the
on disk inode LSN field.

Now this might seem like a reasonable thing to do, but it is wrong
on multiple levels. Firstly, if the item is not yet in the AIL,
item->li_lsn is zero. i.e. the first time the inode it is logged and
formatted, the LSN we write into the log inode will be zero. If we
only log it once, recovery will run and can write this zero LSN into
the inode.

This means that the next time the inode is logged and log recovery
runs, it will *always* replay changes to the inode regardless of
whether the inode is newer on disk than the version in the log and
that violates the entire purpose of recording the LSN in the inode
at writeback time (i.e. to stop it going backwards in time on disk
during recovery).

Secondly, if we commit the CIL to the journal so the inode item
moves to the AIL, and then relog the inode, the LSN that gets
stamped into the log inode will be the LSN of the inode's current
location in the AIL, not it's age on disk. And it's not the LSN that
will be associated with the current change. That means when log
recovery replays this inode item, the LSN that ends up on disk is
the LSN for the previous changes in the log, not the current
changes being replayed. IOWs, after recovery the LSN on disk is not
in sync with the LSN of the modifications that were replayed into
the inode. This, again, violates the recovery ordering semantics
that on-disk writeback LSNs provide.

Hence the inode LSN in the log dinode is -always- invalid.

Thirdly, recovery actually has the LSN of the log transaction it is
replaying right at hand - it uses it to determine if it should
replay the inode by comparing it to the on-disk inode's LSN. But it
doesn't use that LSN to stamp the LSN into the inode which will be
written back when the transaction is fully replayed. It uses the one
in the log dinode, which we know is always going to be incorrect.

Looking back at the change history, the inode logging was broken by
commit 93f958f9c41f ("xfs: cull unnecessary icdinode fields") way
back in 2016 by a stupid idiot who thought he knew how this code
worked. i.e. me. That commit replaced an in memory di_lsn field that
was updated only at inode writeback time from the inode item.li_lsn
value - and hence always contained the same LSN that appeared in the
on-disk inode - with a read of the inode item LSN at inode format
time. CLearly these are not the same thing.

Before 93f958f9c41f, the log recovery behaviour was irrelevant,
because the LSN in the log inode always matched the on-disk LSN at
the time the inode was logged, hence recovery of the transaction
would never make the on-disk LSN in the inode go backwards or get
out of sync.

A symptom of the problem is this, caught from a failure of
generic/482. Before log recovery, the inode has been allocated but
never used:

xfs_db> inode 393388
xfs_db> p
core.magic = 0x494e
core.mode = 0
....
v3.crc = 0x99126961 (correct)
v3.change_count = 0
v3.lsn = 0
v3.flags2 = 0
v3.cowextsize = 0
v3.crtime.sec = Thu Jan  1 10:00:00 1970
v3.crtime.nsec = 0

After log recovery:

xfs_db> p
core.magic = 0x494e
core.mode = 020444
....
v3.crc = 0x23e68f23 (correct)
v3.change_count = 2
v3.lsn = 0
v3.flags2 = 0
v3.cowextsize = 0
v3.crtime.sec = Thu Jul 22 17:03:03 2021
v3.crtime.nsec = 751000000
...

You can see that the LSN of the on-disk inode is 0, even though it
clearly has been written to disk. I point out this inode, because
the generic/482 failure occurred because several adjacent inodes in
this specific inode cluster were not replayed correctly and still
appeared to be zero on disk when all the other metadata (inobt,
finobt, directories, etc) indicated they should be allocated and
written back.

The fix for this is two-fold. The first is that we need to either
revert the LSN changes in 93f958f9c41f or stop logging the inode LSN
altogether. If we do the former, log recovery does not need to
change but we add 8 bytes of memory per inode to store what is
largely a write-only inode field. If we do the latter, log recovery
needs to stamp the on-disk inode in the same manner that inode
writeback does.

I prefer the latter, because we shouldn't really be trying to log
and replay changes to the on disk LSN as the on-disk value is the
canonical source of the on-disk version of the inode. It also
matches the way we recover buffer items - we create a buf_log_item
that carries the current recovery transaction LSN that gets stamped
into the buffer by the write verifier when it gets written back
when the transaction is fully recovered.

However, this might break log recovery on older kernels even more,
so I'm going to simply ignore the logged value in recovery and stamp
the on-disk inode with the LSN of the transaction being recovered
that will trigger writeback on transaction recovery completion. This
will ensure that the on-disk inode LSN always reflects the LSN of
the last change that was written to disk, regardless of whether it
comes from log recovery or runtime writeback.

Fixes: 93f958f9c41f ("xfs: cull unnecessary icdinode fields")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/libxfs/xfs_log_format.h  |   11 ++++++++++-
 fs/xfs/xfs_inode_item_recover.c |   39 +++++++++++++++++++++++++++++----------
 2 files changed, 39 insertions(+), 11 deletions(-)

--- a/fs/xfs/libxfs/xfs_log_format.h
+++ b/fs/xfs/libxfs/xfs_log_format.h
@@ -414,7 +414,16 @@ struct xfs_log_dinode {
 	/* start of the extended dinode, writable fields */
 	uint32_t	di_crc;		/* CRC of the inode */
 	uint64_t	di_changecount;	/* number of attribute changes */
-	xfs_lsn_t	di_lsn;		/* flush sequence */
+
+	/*
+	 * The LSN we write to this field during formatting is not a reflection
+	 * of the current on-disk LSN. It should never be used for recovery
+	 * sequencing, nor should it be recovered into the on-disk inode at all.
+	 * See xlog_recover_inode_commit_pass2() and xfs_log_dinode_to_disk()
+	 * for details.
+	 */
+	xfs_lsn_t	di_lsn;
+
 	uint64_t	di_flags2;	/* more random flags */
 	uint32_t	di_cowextsize;	/* basic cow extent size for file */
 	uint8_t		di_pad2[12];	/* more padding for future expansion */
--- a/fs/xfs/xfs_inode_item_recover.c
+++ b/fs/xfs/xfs_inode_item_recover.c
@@ -145,7 +145,8 @@ xfs_log_dinode_to_disk_ts(
 STATIC void
 xfs_log_dinode_to_disk(
 	struct xfs_log_dinode	*from,
-	struct xfs_dinode	*to)
+	struct xfs_dinode	*to,
+	xfs_lsn_t		lsn)
 {
 	to->di_magic = cpu_to_be16(from->di_magic);
 	to->di_mode = cpu_to_be16(from->di_mode);
@@ -182,7 +183,7 @@ xfs_log_dinode_to_disk(
 		to->di_flags2 = cpu_to_be64(from->di_flags2);
 		to->di_cowextsize = cpu_to_be32(from->di_cowextsize);
 		to->di_ino = cpu_to_be64(from->di_ino);
-		to->di_lsn = cpu_to_be64(from->di_lsn);
+		to->di_lsn = cpu_to_be64(lsn);
 		memcpy(to->di_pad2, from->di_pad2, sizeof(to->di_pad2));
 		uuid_copy(&to->di_uuid, &from->di_uuid);
 		to->di_flushiter = 0;
@@ -261,16 +262,25 @@ xlog_recover_inode_commit_pass2(
 	}
 
 	/*
-	 * If the inode has an LSN in it, recover the inode only if it's less
-	 * than the lsn of the transaction we are replaying. Note: we still
-	 * need to replay an owner change even though the inode is more recent
-	 * than the transaction as there is no guarantee that all the btree
-	 * blocks are more recent than this transaction, too.
+	 * If the inode has an LSN in it, recover the inode only if the on-disk
+	 * inode's LSN is older than the lsn of the transaction we are
+	 * replaying. We can have multiple checkpoints with the same start LSN,
+	 * so the current LSN being equal to the on-disk LSN doesn't necessarily
+	 * mean that the on-disk inode is more recent than the change being
+	 * replayed.
+	 *
+	 * We must check the current_lsn against the on-disk inode
+	 * here because the we can't trust the log dinode to contain a valid LSN
+	 * (see comment below before replaying the log dinode for details).
+	 *
+	 * Note: we still need to replay an owner change even though the inode
+	 * is more recent than the transaction as there is no guarantee that all
+	 * the btree blocks are more recent than this transaction, too.
 	 */
 	if (dip->di_version >= 3) {
 		xfs_lsn_t	lsn = be64_to_cpu(dip->di_lsn);
 
-		if (lsn && lsn != -1 && XFS_LSN_CMP(lsn, current_lsn) >= 0) {
+		if (lsn && lsn != -1 && XFS_LSN_CMP(lsn, current_lsn) > 0) {
 			trace_xfs_log_recover_inode_skip(log, in_f);
 			error = 0;
 			goto out_owner_change;
@@ -368,8 +378,17 @@ xlog_recover_inode_commit_pass2(
 		goto out_release;
 	}
 
-	/* recover the log dinode inode into the on disk inode */
-	xfs_log_dinode_to_disk(ldip, dip);
+	/*
+	 * Recover the log dinode inode into the on disk inode.
+	 *
+	 * The LSN in the log dinode is garbage - it can be zero or reflect
+	 * stale in-memory runtime state that isn't coherent with the changes
+	 * logged in this transaction or the changes written to the on-disk
+	 * inode.  Hence we write the current lSN into the inode because that
+	 * matches what xfs_iflush() would write inode the inode when flushing
+	 * the changes in this transaction.
+	 */
+	xfs_log_dinode_to_disk(ldip, dip, current_lsn);
 
 	fields = in_f->ilf_fields;
 	if (fields & XFS_ILOG_DEV)

[PATCH 5.10 61/65] xfs: Enforce attr3 buffer recovery order

[Greg Kroah-Hartman]

From: Dave Chinner <dchinner@redhat.com>

commit d8f4c2d0398fa1d92cacf854daf80d21a46bfefc upstream.

>From the department of "WTAF? How did we miss that!?"...

When we are recovering a buffer, the first thing we do is check the
buffer magic number and extract the LSN from the buffer. If the LSN
is older than the current LSN, we replay the modification to it. If
the metadata on disk is newer than the transaction in the log, we
skip it. This is a fundamental v5 filesystem metadata recovery
behaviour.

generic/482 failed with an attribute writeback failure during log
recovery. The write verifier caught the corruption before it got
written to disk, and the attr buffer dump looked like:

XFS (dm-3): Metadata corruption detected at xfs_attr3_leaf_verify+0x275/0x2e0, xfs_attr3_leaf block 0x19be8
XFS (dm-3): Unmount and run xfs_repair
XFS (dm-3): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 3b ee 00 00 4d 2a 01 e1  ........;...M*..
00000010: 00 00 00 00 00 01 9b e8 00 00 00 01 00 00 05 38  ...............8
                                  ^^^^^^^^^^^^^^^^^^^^^^^
00000020: df 39 5e 51 58 ac 44 b6 8d c5 e7 10 44 09 bc 17  .9^QX.D.....D...
00000030: 00 00 00 00 00 02 00 83 00 03 00 cc 0f 24 01 00  .............$..
00000040: 00 68 0e bc 0f c8 00 10 00 00 00 00 00 00 00 00  .h..............
00000050: 00 00 3c 31 0f 24 01 00 00 00 3c 32 0f 88 01 00  ..<1.$....<2....
00000060: 00 00 3c 33 0f d8 01 00 00 00 00 00 00 00 00 00  ..<3............
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
.....

The highlighted bytes are the LSN that was replayed into the
buffer: 0x100000538. This is cycle 1, block 0x538. Prior to replay,
that block on disk looks like this:

$ sudo xfs_db -c "fsb 0x417d" -c "type attr3" -c p /dev/mapper/thin-vol
hdr.info.hdr.forw = 0
hdr.info.hdr.back = 0
hdr.info.hdr.magic = 0x3bee
hdr.info.crc = 0xb5af0bc6 (correct)
hdr.info.bno = 105448
hdr.info.lsn = 0x100000900
               ^^^^^^^^^^^
hdr.info.uuid = df395e51-58ac-44b6-8dc5-e7104409bc17
hdr.info.owner = 131203
hdr.count = 2
hdr.usedbytes = 120
hdr.firstused = 3796
hdr.holes = 1
hdr.freemap[0-2] = [base,size]

Note the LSN stamped into the buffer on disk: 1/0x900. The version
on disk is much newer than the log transaction that was being
replayed. That's a bug, and should -never- happen.

So I immediately went to look at xlog_recover_get_buf_lsn() to check
that we handled the LSN correctly. I was wondering if there was a
similar "two commits with the same start LSN skips the second
replay" problem with buffers. I didn't get that far, because I found
a much more basic, rudimentary bug: xlog_recover_get_buf_lsn()
doesn't recognise buffers with XFS_ATTR3_LEAF_MAGIC set in them!!!

IOWs, attr3 leaf buffers fall through the magic number checks
unrecognised, so trigger the "recover immediately" behaviour instead
of undergoing an LSN check. IOWs, we incorrectly replay ATTR3 leaf
buffers and that causes silent on disk corruption of inode attribute
forks and potentially other things....

Git history shows this is *another* zero day bug, this time
introduced in commit 50d5c8d8e938 ("xfs: check LSN ordering for v5
superblocks during recovery") which failed to handle the attr3 leaf
buffers in recovery. And we've failed to handle them ever since...

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/xfs_buf_item_recover.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/xfs/xfs_buf_item_recover.c
+++ b/fs/xfs/xfs_buf_item_recover.c
@@ -796,6 +796,7 @@ xlog_recover_get_buf_lsn(
 	switch (magicda) {
 	case XFS_DIR3_LEAF1_MAGIC:
 	case XFS_DIR3_LEAFN_MAGIC:
+	case XFS_ATTR3_LEAF_MAGIC:
 	case XFS_DA3_NODE_MAGIC:
 		lsn = be64_to_cpu(((struct xfs_da3_blkinfo *)blk)->lsn);
 		uuid = &((struct xfs_da3_blkinfo *)blk)->uuid;

[PATCH 5.10 62/65] x86/bugs: Do not enable IBPB at firmware entry when IBPB is not available

[Greg Kroah-Hartman]

From: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>

commit 571c30b1a88465a1c85a6f7762609939b9085a15 upstream.

Some cloud hypervisors do not provide IBPB on very recent CPU processors,
including AMD processors affected by Retbleed.

Using IBPB before firmware calls on such systems would cause a GPF at boot
like the one below. Do not enable such calls when IBPB support is not
present.

  EFI Variables Facility v0.08 2004-May-17
  general protection fault, maybe for address 0x1: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 0 PID: 24 Comm: kworker/u2:1 Not tainted 5.19.0-rc8+ #7
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
  Workqueue: efi_rts_wq efi_call_rts
  RIP: 0010:efi_call_rts
  Code: e8 37 33 58 ff 41 bf 48 00 00 00 49 89 c0 44 89 f9 48 83 c8 01 4c 89 c2 48 c1 ea 20 66 90 b9 49 00 00 00 b8 01 00 00 00 31 d2 <0f> 30 e8 7b 9f 5d ff e8 f6 f8 ff ff 4c 89 f1 4c 89 ea 4c 89 e6 48
  RSP: 0018:ffffb373800d7e38 EFLAGS: 00010246
  RAX: 0000000000000001 RBX: 0000000000000006 RCX: 0000000000000049
  RDX: 0000000000000000 RSI: ffff94fbc19d8fe0 RDI: ffff94fbc1b2b300
  RBP: ffffb373800d7e70 R08: 0000000000000000 R09: 0000000000000000
  R10: 000000000000000b R11: 000000000000000b R12: ffffb3738001fd78
  R13: ffff94fbc2fcfc00 R14: ffffb3738001fd80 R15: 0000000000000048
  FS:  0000000000000000(0000) GS:ffff94fc3da00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffff94fc30201000 CR3: 000000006f610000 CR4: 00000000000406f0
  Call Trace:
   <TASK>
   ? __wake_up
   process_one_work
   worker_thread
   ? rescuer_thread
   kthread
   ? kthread_complete_and_exit
   ret_from_fork
   </TASK>
  Modules linked in:

Fixes: 28a99e95f55c ("x86/amd: Use IBPB for firmware calls")
Reported-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220728122602.2500509-1-cascardo@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/bugs.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -1476,6 +1476,7 @@ static void __init spectre_v2_select_mit
 	 * enable IBRS around firmware calls.
 	 */
 	if (boot_cpu_has_bug(X86_BUG_RETBLEED) &&
+	    boot_cpu_has(X86_FEATURE_IBPB) &&
 	    (boot_cpu_data.x86_vendor == X86_VENDOR_AMD ||
 	     boot_cpu_data.x86_vendor == X86_VENDOR_HYGON)) {
 

[PATCH 5.10 63/65] bpf: Consolidate shared test timing code

[Greg Kroah-Hartman]

From: Tianchen Ding <dtcccc@linux.alibaba.com>

From: Lorenz Bauer <lmb@cloudflare.com>

commit 607b9cc92bd7208338d714a22b8082fe83bcb177 upstream.

Share the timing / signal interruption logic between different
implementations of PROG_TEST_RUN. There is a change in behaviour
as well. We check the loop exit condition before checking for
pending signals. This resolves an edge case where a signal
arrives during the last iteration. Instead of aborting with
EINTR we return the successful result to user space.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210303101816.36774-2-lmb@cloudflare.com
[dtcccc: fix conflicts in bpf_test_run()]
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bpf/test_run.c |  140 +++++++++++++++++++++++++++++------------------------
 1 file changed, 78 insertions(+), 62 deletions(-)

--- a/net/bpf/test_run.c
+++ b/net/bpf/test_run.c
@@ -16,14 +16,78 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/bpf_test_run.h>
 
+struct bpf_test_timer {
+	enum { NO_PREEMPT, NO_MIGRATE } mode;
+	u32 i;
+	u64 time_start, time_spent;
+};
+
+static void bpf_test_timer_enter(struct bpf_test_timer *t)
+	__acquires(rcu)
+{
+	rcu_read_lock();
+	if (t->mode == NO_PREEMPT)
+		preempt_disable();
+	else
+		migrate_disable();
+
+	t->time_start = ktime_get_ns();
+}
+
+static void bpf_test_timer_leave(struct bpf_test_timer *t)
+	__releases(rcu)
+{
+	t->time_start = 0;
+
+	if (t->mode == NO_PREEMPT)
+		preempt_enable();
+	else
+		migrate_enable();
+	rcu_read_unlock();
+}
+
+static bool bpf_test_timer_continue(struct bpf_test_timer *t, u32 repeat, int *err, u32 *duration)
+	__must_hold(rcu)
+{
+	t->i++;
+	if (t->i >= repeat) {
+		/* We're done. */
+		t->time_spent += ktime_get_ns() - t->time_start;
+		do_div(t->time_spent, t->i);
+		*duration = t->time_spent > U32_MAX ? U32_MAX : (u32)t->time_spent;
+		*err = 0;
+		goto reset;
+	}
+
+	if (signal_pending(current)) {
+		/* During iteration: we've been cancelled, abort. */
+		*err = -EINTR;
+		goto reset;
+	}
+
+	if (need_resched()) {
+		/* During iteration: we need to reschedule between runs. */
+		t->time_spent += ktime_get_ns() - t->time_start;
+		bpf_test_timer_leave(t);
+		cond_resched();
+		bpf_test_timer_enter(t);
+	}
+
+	/* Do another round. */
+	return true;
+
+reset:
+	t->i = 0;
+	return false;
+}
+
 static int bpf_test_run(struct bpf_prog *prog, void *ctx, u32 repeat,
 			u32 *retval, u32 *time, bool xdp)
 {
 	struct bpf_cgroup_storage *storage[MAX_BPF_CGROUP_STORAGE_TYPE] = { NULL };
+	struct bpf_test_timer t = { NO_MIGRATE };
 	enum bpf_cgroup_storage_type stype;
-	u64 time_start, time_spent = 0;
-	int ret = 0;
-	u32 i;
+	int ret;
 
 	for_each_cgroup_storage_type(stype) {
 		storage[stype] = bpf_cgroup_storage_alloc(prog, stype);
@@ -38,10 +102,8 @@ static int bpf_test_run(struct bpf_prog
 	if (!repeat)
 		repeat = 1;
 
-	rcu_read_lock();
-	migrate_disable();
-	time_start = ktime_get_ns();
-	for (i = 0; i < repeat; i++) {
+	bpf_test_timer_enter(&t);
+	do {
 		ret = bpf_cgroup_storage_set(storage);
 		if (ret)
 			break;
@@ -53,29 +115,8 @@ static int bpf_test_run(struct bpf_prog
 
 		bpf_cgroup_storage_unset();
 
-		if (signal_pending(current)) {
-			ret = -EINTR;
-			break;
-		}
-
-		if (need_resched()) {
-			time_spent += ktime_get_ns() - time_start;
-			migrate_enable();
-			rcu_read_unlock();
-
-			cond_resched();
-
-			rcu_read_lock();
-			migrate_disable();
-			time_start = ktime_get_ns();
-		}
-	}
-	time_spent += ktime_get_ns() - time_start;
-	migrate_enable();
-	rcu_read_unlock();
-
-	do_div(time_spent, repeat);
-	*time = time_spent > U32_MAX ? U32_MAX : (u32)time_spent;
+	} while (bpf_test_timer_continue(&t, repeat, &ret, time));
+	bpf_test_timer_leave(&t);
 
 	for_each_cgroup_storage_type(stype)
 		bpf_cgroup_storage_free(storage[stype]);
@@ -688,18 +729,17 @@ int bpf_prog_test_run_flow_dissector(str
 				     const union bpf_attr *kattr,
 				     union bpf_attr __user *uattr)
 {
+	struct bpf_test_timer t = { NO_PREEMPT };
 	u32 size = kattr->test.data_size_in;
 	struct bpf_flow_dissector ctx = {};
 	u32 repeat = kattr->test.repeat;
 	struct bpf_flow_keys *user_ctx;
 	struct bpf_flow_keys flow_keys;
-	u64 time_start, time_spent = 0;
 	const struct ethhdr *eth;
 	unsigned int flags = 0;
 	u32 retval, duration;
 	void *data;
 	int ret;
-	u32 i;
 
 	if (prog->type != BPF_PROG_TYPE_FLOW_DISSECTOR)
 		return -EINVAL;
@@ -735,39 +775,15 @@ int bpf_prog_test_run_flow_dissector(str
 	ctx.data = data;
 	ctx.data_end = (__u8 *)data + size;
 
-	rcu_read_lock();
-	preempt_disable();
-	time_start = ktime_get_ns();
-	for (i = 0; i < repeat; i++) {
+	bpf_test_timer_enter(&t);
+	do {
 		retval = bpf_flow_dissect(prog, &ctx, eth->h_proto, ETH_HLEN,
 					  size, flags);
+	} while (bpf_test_timer_continue(&t, repeat, &ret, &duration));
+	bpf_test_timer_leave(&t);
 
-		if (signal_pending(current)) {
-			preempt_enable();
-			rcu_read_unlock();
-
-			ret = -EINTR;
-			goto out;
-		}
-
-		if (need_resched()) {
-			time_spent += ktime_get_ns() - time_start;
-			preempt_enable();
-			rcu_read_unlock();
-
-			cond_resched();
-
-			rcu_read_lock();
-			preempt_disable();
-			time_start = ktime_get_ns();
-		}
-	}
-	time_spent += ktime_get_ns() - time_start;
-	preempt_enable();
-	rcu_read_unlock();
-
-	do_div(time_spent, repeat);
-	duration = time_spent > U32_MAX ? U32_MAX : (u32)time_spent;
+	if (ret < 0)
+		goto out;
 
 	ret = bpf_test_finish(kattr, uattr, &flow_keys, sizeof(flow_keys),
 			      retval, duration);

[PATCH 5.10 64/65] bpf: Add PROG_TEST_RUN support for sk_lookup programs

[Greg Kroah-Hartman]

From: Tianchen Ding <dtcccc@linux.alibaba.com>

From: Lorenz Bauer <lmb@cloudflare.com>

commit 7c32e8f8bc33a5f4b113a630857e46634e3e143b upstream.

Allow to pass sk_lookup programs to PROG_TEST_RUN. User space
provides the full bpf_sk_lookup struct as context. Since the
context includes a socket pointer that can't be exposed
to user space we define that PROG_TEST_RUN returns the cookie
of the selected socket or zero in place of the socket pointer.

We don't support testing programs that select a reuseport socket,
since this would mean running another (unrelated) BPF program
from the sk_lookup test handler.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210303101816.36774-3-lmb@cloudflare.com
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/bpf.h            |   10 +++
 include/uapi/linux/bpf.h       |    5 +
 net/bpf/test_run.c             |  105 +++++++++++++++++++++++++++++++++++++++++
 net/core/filter.c              |    1 
 tools/include/uapi/linux/bpf.h |    5 +
 5 files changed, 124 insertions(+), 2 deletions(-)

--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -1457,6 +1457,9 @@ int bpf_prog_test_run_flow_dissector(str
 int bpf_prog_test_run_raw_tp(struct bpf_prog *prog,
 			     const union bpf_attr *kattr,
 			     union bpf_attr __user *uattr);
+int bpf_prog_test_run_sk_lookup(struct bpf_prog *prog,
+				const union bpf_attr *kattr,
+				union bpf_attr __user *uattr);
 bool btf_ctx_access(int off, int size, enum bpf_access_type type,
 		    const struct bpf_prog *prog,
 		    struct bpf_insn_access_aux *info);
@@ -1670,6 +1673,13 @@ static inline int bpf_prog_test_run_flow
 {
 	return -ENOTSUPP;
 }
+
+static inline int bpf_prog_test_run_sk_lookup(struct bpf_prog *prog,
+					      const union bpf_attr *kattr,
+					      union bpf_attr __user *uattr)
+{
+	return -ENOTSUPP;
+}
 
 static inline void bpf_map_put(struct bpf_map *map)
 {
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -5007,7 +5007,10 @@ struct bpf_pidns_info {
 
 /* User accessible data for SK_LOOKUP programs. Add new fields at the end. */
 struct bpf_sk_lookup {
-	__bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */
+	union {
+		__bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */
+		__u64 cookie; /* Non-zero if socket was selected in PROG_TEST_RUN */
+	};
 
 	__u32 family;		/* Protocol family (AF_INET, AF_INET6) */
 	__u32 protocol;		/* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */
--- a/net/bpf/test_run.c
+++ b/net/bpf/test_run.c
@@ -10,8 +10,10 @@
 #include <net/bpf_sk_storage.h>
 #include <net/sock.h>
 #include <net/tcp.h>
+#include <net/net_namespace.h>
 #include <linux/error-injection.h>
 #include <linux/smp.h>
+#include <linux/sock_diag.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/bpf_test_run.h>
@@ -796,3 +798,106 @@ out:
 	kfree(data);
 	return ret;
 }
+
+int bpf_prog_test_run_sk_lookup(struct bpf_prog *prog, const union bpf_attr *kattr,
+				union bpf_attr __user *uattr)
+{
+	struct bpf_test_timer t = { NO_PREEMPT };
+	struct bpf_prog_array *progs = NULL;
+	struct bpf_sk_lookup_kern ctx = {};
+	u32 repeat = kattr->test.repeat;
+	struct bpf_sk_lookup *user_ctx;
+	u32 retval, duration;
+	int ret = -EINVAL;
+
+	if (prog->type != BPF_PROG_TYPE_SK_LOOKUP)
+		return -EINVAL;
+
+	if (kattr->test.flags || kattr->test.cpu)
+		return -EINVAL;
+
+	if (kattr->test.data_in || kattr->test.data_size_in || kattr->test.data_out ||
+	    kattr->test.data_size_out)
+		return -EINVAL;
+
+	if (!repeat)
+		repeat = 1;
+
+	user_ctx = bpf_ctx_init(kattr, sizeof(*user_ctx));
+	if (IS_ERR(user_ctx))
+		return PTR_ERR(user_ctx);
+
+	if (!user_ctx)
+		return -EINVAL;
+
+	if (user_ctx->sk)
+		goto out;
+
+	if (!range_is_zero(user_ctx, offsetofend(typeof(*user_ctx), local_port), sizeof(*user_ctx)))
+		goto out;
+
+	if (user_ctx->local_port > U16_MAX || user_ctx->remote_port > U16_MAX) {
+		ret = -ERANGE;
+		goto out;
+	}
+
+	ctx.family = (u16)user_ctx->family;
+	ctx.protocol = (u16)user_ctx->protocol;
+	ctx.dport = (u16)user_ctx->local_port;
+	ctx.sport = (__force __be16)user_ctx->remote_port;
+
+	switch (ctx.family) {
+	case AF_INET:
+		ctx.v4.daddr = (__force __be32)user_ctx->local_ip4;
+		ctx.v4.saddr = (__force __be32)user_ctx->remote_ip4;
+		break;
+
+#if IS_ENABLED(CONFIG_IPV6)
+	case AF_INET6:
+		ctx.v6.daddr = (struct in6_addr *)user_ctx->local_ip6;
+		ctx.v6.saddr = (struct in6_addr *)user_ctx->remote_ip6;
+		break;
+#endif
+
+	default:
+		ret = -EAFNOSUPPORT;
+		goto out;
+	}
+
+	progs = bpf_prog_array_alloc(1, GFP_KERNEL);
+	if (!progs) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	progs->items[0].prog = prog;
+
+	bpf_test_timer_enter(&t);
+	do {
+		ctx.selected_sk = NULL;
+		retval = BPF_PROG_SK_LOOKUP_RUN_ARRAY(progs, ctx, BPF_PROG_RUN);
+	} while (bpf_test_timer_continue(&t, repeat, &ret, &duration));
+	bpf_test_timer_leave(&t);
+
+	if (ret < 0)
+		goto out;
+
+	user_ctx->cookie = 0;
+	if (ctx.selected_sk) {
+		if (ctx.selected_sk->sk_reuseport && !ctx.no_reuseport) {
+			ret = -EOPNOTSUPP;
+			goto out;
+		}
+
+		user_ctx->cookie = sock_gen_cookie(ctx.selected_sk);
+	}
+
+	ret = bpf_test_finish(kattr, uattr, NULL, 0, retval, duration);
+	if (!ret)
+		ret = bpf_ctx_finish(kattr, uattr, user_ctx, sizeof(*user_ctx));
+
+out:
+	bpf_prog_array_free(progs);
+	kfree(user_ctx);
+	return ret;
+}
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -10334,6 +10334,7 @@ static u32 sk_lookup_convert_ctx_access(
 }
 
 const struct bpf_prog_ops sk_lookup_prog_ops = {
+	.test_run = bpf_prog_test_run_sk_lookup,
 };
 
 const struct bpf_verifier_ops sk_lookup_verifier_ops = {
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -5006,7 +5006,10 @@ struct bpf_pidns_info {
 
 /* User accessible data for SK_LOOKUP programs. Add new fields at the end. */
 struct bpf_sk_lookup {
-	__bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */
+	union {
+		__bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */
+		__u64 cookie; /* Non-zero if socket was selected in PROG_TEST_RUN */
+	};
 
 	__u32 family;		/* Protocol family (AF_INET, AF_INET6) */
 	__u32 protocol;		/* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */

[PATCH 5.10 65/65] selftests: bpf: Dont run sk_lookup in verifier tests

[Greg Kroah-Hartman]

From: Tianchen Ding <dtcccc@linux.alibaba.com>

From: Lorenz Bauer <lmb@cloudflare.com>

commit b4f894633fa14d7d46ba7676f950b90a401504bb upstream.

sk_lookup doesn't allow setting data_in for bpf_prog_run. This doesn't
play well with the verifier tests, since they always set a 64 byte
input buffer. Allow not running verifier tests by setting
bpf_test.runs to a negative value and don't run the ctx access case
for sk_lookup. We have dedicated ctx access tests so skipping here
doesn't reduce coverage.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210303101816.36774-6-lmb@cloudflare.com
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/test_verifier.c          |    4 ++--
 tools/testing/selftests/bpf/verifier/ctx_sk_lookup.c |    1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -100,7 +100,7 @@ struct bpf_test {
 	enum bpf_prog_type prog_type;
 	uint8_t flags;
 	void (*fill_helper)(struct bpf_test *self);
-	uint8_t runs;
+	int runs;
 #define bpf_testdata_struct_t					\
 	struct {						\
 		uint32_t retval, retval_unpriv;			\
@@ -1054,7 +1054,7 @@ static void do_test_single(struct bpf_te
 
 	run_errs = 0;
 	run_successes = 0;
-	if (!alignment_prevented_execution && fd_prog >= 0) {
+	if (!alignment_prevented_execution && fd_prog >= 0 && test->runs >= 0) {
 		uint32_t expected_val;
 		int i;
 
--- a/tools/testing/selftests/bpf/verifier/ctx_sk_lookup.c
+++ b/tools/testing/selftests/bpf/verifier/ctx_sk_lookup.c
@@ -239,6 +239,7 @@
 	.result = ACCEPT,
 	.prog_type = BPF_PROG_TYPE_SK_LOOKUP,
 	.expected_attach_type = BPF_SK_LOOKUP,
+	.runs = -1,
 },
 /* invalid 8-byte reads from a 4-byte fields in bpf_sk_lookup */
 {

Re: [PATCH 5.10 00/65] 5.10.135-rc1 review

[Jon Hunter]

On Mon, 01 Aug 2022 13:46:17 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.135 release.
> There are 65 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 03 Aug 2022 11:41:16 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.135-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.10:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    75 tests:	75 pass, 0 fail

Linux version:	5.10.135-rc1-g4f874431e68c
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.10 00/65] 5.10.135-rc1 review

[Florian Fainelli]

On 8/1/22 04:46, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.135 release.
> There are 65 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 03 Aug 2022 11:41:16 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.135-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.10 00/65] 5.10.135-rc1 review

[Daniel Díaz]

Hello!

On 01/08/22 06:46, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.135 release.
> There are 65 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 03 Aug 2022 11:41:16 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.135-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.10.135-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.10.y
* git commit: 4f874431e68c8a1cf6c0d0c8353e404f9e2b6e02
* git describe: v5.10.133-168-g4f874431e68c
* test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.133-168-g4f874431e68c

## No test regressions (compared to v5.10.134)

## No metric regressions (compared to v5.10.134)

## No test fixes (compared to v5.10.134)

## No metric fixes (compared to v5.10.134)

## Test result summary
total: 122810, pass: 108952, fail: 547, skip: 12594, xfail: 717

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 306 total, 306 passed, 0 failed
* arm64: 62 total, 60 passed, 2 failed
* i386: 52 total, 50 passed, 2 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 51 total, 51 passed, 0 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 55 total, 53 passed, 2 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* rcutorture
* ssuite
* v4l2-compliance
* vdso


Greetings!

Daniel Díaz
daniel.diaz@linaro.org

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.10 00/65] 5.10.135-rc1 review

[Shuah Khan]

On 8/1/22 5:46 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.135 release.
> There are 65 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 03 Aug 2022 11:41:16 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.135-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.10 00/65] 5.10.135-rc1 review

[Guenter Roeck]

On Mon, Aug 01, 2022 at 01:46:17PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.135 release.
> There are 65 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 03 Aug 2022 11:41:16 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 163 pass: 163 fail: 0
Qemu test results:
	total: 477 pass: 477 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.10 00/65] 5.10.135-rc1 review

[Rudi Heitbaum]

On Mon, Aug 01, 2022 at 01:46:17PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.135 release.
> There are 65 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 03 Aug 2022 11:41:16 +0000.
> Anything received after that time might be too late.

Hi Greg,

5.10.135-rc1 tested.

Run tested on:
- Intel Skylake x86_64 (nuc6 i5-6260U)

In addition - build tested for:
- Allwinner A64
- Allwinner H3
- Allwinner H5
- Allwinner H6
- Rockchip RK3288
- Rockchip RK3328
- Rockchip RK3399pro

Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
--
Rudi

Re: [PATCH 5.10 63/65] bpf: Consolidate shared test timing code

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 872 bytes --]

Hi!

> From: Tianchen Ding <dtcccc@linux.alibaba.com>
> 
> From: Lorenz Bauer <lmb@cloudflare.com>
> 
> commit 607b9cc92bd7208338d714a22b8082fe83bcb177 upstream.

Patches 63 to 65 have double "From" and thus mismatching sign-off.

Best regards,
                                                        Pavel

> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
> Acked-by: Andrii Nakryiko <andrii@kernel.org>
> Link: https://lore.kernel.org/bpf/20210303101816.36774-2-lmb@cloudflare.com
> [dtcccc: fix conflicts in bpf_test_run()]
> Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 63/65] bpf: Consolidate shared test timing code

[Greg Kroah-Hartman]

On Tue, Aug 02, 2022 at 02:13:48PM +0200, Pavel Machek wrote:
> Hi!
> 
> > From: Tianchen Ding <dtcccc@linux.alibaba.com>
> > 
> > From: Lorenz Bauer <lmb@cloudflare.com>
> > 
> > commit 607b9cc92bd7208338d714a22b8082fe83bcb177 upstream.
> 
> Patches 63 to 65 have double "From" and thus mismatching sign-off.

Ick, sorry, now fixed up.

greg k-h

Re: [PATCH 5.10 00/65] 5.10.135-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 661 bytes --]

Hi!

> This is the start of the stable review cycle for the 5.10.135 release.
> There are 65 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 00/65] 5.10.135-rc1 review

[Sudip Mukherjee (Codethink)]

Hi Greg,

On Mon, Aug 01, 2022 at 01:46:17PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.135 release.
> There are 65 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 03 Aug 2022 11:41:16 +0000.
> Anything received after that time might be too late.

Build test (gcc version 11.3.1 20220724):
mips: 63 configs -> no failure
arm: 104 configs -> no failure
arm64: 3 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]

[1]. https://openqa.qa.codethink.co.uk/tests/1603
[2]. https://openqa.qa.codethink.co.uk/tests/1609


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip