* [PATCH v2 1/5] arm: bcmbca: add bcm63178 SoC support
2022-08-01 18:39 [PATCH v2 0/5] arm: bcmbca: add basic support for Broadcom BCA SoCs William Zhang
@ 2022-08-01 18:39 ` William Zhang
2022-10-31 14:45 ` Tom Rini
2022-08-01 18:39 ` [PATCH v2 2/5] arm: bcmbca: add bcm6846 " William Zhang
` (3 subsequent siblings)
4 siblings, 1 reply; 7+ messages in thread
From: William Zhang @ 2022-08-01 18:39 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: joel.peshkin, dan.beygelman, philippe.reynes, kursad.oney,
anand.gore, William Zhang, Andre Przywara, Christian Hewitt,
Fabio Estevam, Marek Vasut, Samuel Holland, Simon Glass,
Tom Rini, Tomer Yacoby, Ying-Chun Liu (PaulLiu)
[-- Attachment #1: Type: text/plain, Size: 9235 bytes --]
BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
---
Changes in v2:
- Move COUNTER_FREQUENCY to bcm63178 defconfig
MAINTAINERS | 5 +-
arch/arm/dts/Makefile | 2 +
arch/arm/dts/bcm63178.dtsi | 120 +++++++++++++++++++++++++
arch/arm/dts/bcm963178.dts | 30 +++++++
arch/arm/mach-bcmbca/Kconfig | 10 ++-
arch/arm/mach-bcmbca/Makefile | 1 +
arch/arm/mach-bcmbca/bcm63178/Kconfig | 17 ++++
arch/arm/mach-bcmbca/bcm63178/Makefile | 5 ++
board/broadcom/bcmbca/Kconfig | 7 ++
configs/bcm963178_defconfig | 23 +++++
include/configs/bcm963178.h | 11 +++
11 files changed, 228 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/dts/bcm63178.dtsi
create mode 100644 arch/arm/dts/bcm963178.dts
create mode 100644 arch/arm/mach-bcmbca/bcm63178/Kconfig
create mode 100644 arch/arm/mach-bcmbca/bcm63178/Makefile
create mode 100644 configs/bcm963178_defconfig
create mode 100644 include/configs/bcm963178.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 31291d34f353..a01d2b69b260 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -216,8 +216,9 @@ M: Joel Peshkin <joel.peshkin@broadcom.com>
S: Maintained
F: arch/arm/mach-bcmbca/
F: board/broadcom/bcmbca/
-F: configs/bcm947622_defconfig
-F: include/configs/bcm947622.h
+N: bcmbca
+N: bcm[9]?47622
+N: bcm[9]?63178
ARM BROADCOM BCMSTB
M: Thomas Fitzsimmons <fitzsim@fitzsim.org>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 7fa275ea7cca..6628b1151fea 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1165,6 +1165,8 @@ dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
dtb-$(CONFIG_BCM47622) += \
bcm947622.dtb
+dtb-$(CONFIG_BCM63178) += \
+ bcm963178.dtb
dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
diff --git a/arch/arm/dts/bcm63178.dtsi b/arch/arm/dts/bcm63178.dtsi
new file mode 100644
index 000000000000..cbd094dde6d0
--- /dev/null
+++ b/arch/arm/dts/bcm63178.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm63178", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>,
+ <&CA7_2>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/dts/bcm963178.dts b/arch/arm/dts/bcm963178.dts
new file mode 100644
index 000000000000..fa096e9cde23
--- /dev/null
+++ b/arch/arm/dts/bcm963178.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63178.dtsi"
+
+/ {
+ model = "Broadcom BCM963178 Reference Board";
+ compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig
index 2d49380f879b..99e26e4ab8c9 100644
--- a/arch/arm/mach-bcmbca/Kconfig
+++ b/arch/arm/mach-bcmbca/Kconfig
@@ -12,6 +12,14 @@ config BCM47622
select DM_SERIAL
select PL01X_SERIAL
-endif
+config BCM63178
+ bool "Support for Broadcom 63178 Family"
+ select SYS_ARCH_TIMER
+ select CPU_V7A
+ select DM_SERIAL
+ select PL01X_SERIAL
source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
+source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
+
+endif
diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile
index 072d4ea7b5e6..fdcade6bfe1a 100644
--- a/arch/arm/mach-bcmbca/Makefile
+++ b/arch/arm/mach-bcmbca/Makefile
@@ -4,3 +4,4 @@
#
obj-$(CONFIG_BCM47622) += bcm47622/
+obj-$(CONFIG_BCM63178) += bcm63178/
diff --git a/arch/arm/mach-bcmbca/bcm63178/Kconfig b/arch/arm/mach-bcmbca/bcm63178/Kconfig
new file mode 100644
index 000000000000..73ac46284b2c
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm63178/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM63178
+
+config TARGET_BCM963178
+ bool "Broadcom 63178 Reference Board"
+ depends on ARCH_BCMBCA
+
+config SYS_SOC
+ default "bcm63178"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
diff --git a/arch/arm/mach-bcmbca/bcm63178/Makefile b/arch/arm/mach-bcmbca/bcm63178/Makefile
new file mode 100644
index 000000000000..beb979af7520
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm63178/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o
diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig
index 63d4252da620..53846761b664 100644
--- a/board/broadcom/bcmbca/Kconfig
+++ b/board/broadcom/bcmbca/Kconfig
@@ -15,3 +15,10 @@ config SYS_CONFIG_NAME
default "bcm947622"
endif
+
+if TARGET_BCM963178
+
+config SYS_CONFIG_NAME
+ default "bcm963178"
+
+endif
diff --git a/configs/bcm963178_defconfig b/configs/bcm963178_defconfig
new file mode 100644
index 000000000000..d9e62cf34cd1
--- /dev/null
+++ b/configs/bcm963178_defconfig
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=50000000
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM63178=y
+CONFIG_TARGET_BCM963178=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm963178"
+CONFIG_IDENT_STRING=" Broadcom BCM63178"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
diff --git a/include/configs/bcm963178.h b/include/configs/bcm963178.h
new file mode 100644
index 000000000000..b25f6a12819a
--- /dev/null
+++ b/include/configs/bcm963178.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM963178_H
+#define __BCM963178_H
+
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+
+#endif
--
2.37.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v2 1/5] arm: bcmbca: add bcm63178 SoC support
2022-08-01 18:39 ` [PATCH v2 1/5] arm: bcmbca: add bcm63178 SoC support William Zhang
@ 2022-10-31 14:45 ` Tom Rini
0 siblings, 0 replies; 7+ messages in thread
From: Tom Rini @ 2022-10-31 14:45 UTC (permalink / raw)
To: William Zhang
Cc: U-Boot Mailing List, joel.peshkin, dan.beygelman,
philippe.reynes, kursad.oney, anand.gore, Andre Przywara,
Christian Hewitt, Fabio Estevam, Marek Vasut, Samuel Holland,
Simon Glass, Tomer Yacoby, Ying-Chun Liu (PaulLiu)
[-- Attachment #1: Type: text/plain, Size: 785 bytes --]
On Mon, Aug 01, 2022 at 11:39:21AM -0700, William Zhang wrote:
> BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA
> (Broadband Carrier Access origin) chipset family so it's added under
> ARCH_BCMBCA platform. This initial support includes a bare-bone
> implementation and dts with CPU subsystem, memory and ARM PL011 uart.
>
> This SoC is supported in the linux-next git repository so the dts and
> dtsi files are copied from linux with minor fix-up that needs to be
> upstreamed to linux as well.
>
> The u-boot image can be loaded from flash or network to the entry
> point address in the memory and boot from there.
>
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
For the series, applied to u-boot/master, thanks!
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 2/5] arm: bcmbca: add bcm6846 SoC support
2022-08-01 18:39 [PATCH v2 0/5] arm: bcmbca: add basic support for Broadcom BCA SoCs William Zhang
2022-08-01 18:39 ` [PATCH v2 1/5] arm: bcmbca: add bcm63178 SoC support William Zhang
@ 2022-08-01 18:39 ` William Zhang
2022-08-01 18:39 ` [PATCH v2 3/5] arm: bcmbca: add bcm6878 " William Zhang
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: William Zhang @ 2022-08-01 18:39 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: joel.peshkin, dan.beygelman, philippe.reynes, kursad.oney,
anand.gore, William Zhang, Andre Przywara, Christian Hewitt,
Fabio Estevam, Marek Vasut, Samuel Holland, Simon Glass,
Tom Rini, Tomer Yacoby, Ying-Chun Liu (PaulLiu)
[-- Attachment #1: Type: text/plain, Size: 8688 bytes --]
BCM6846 is an ARM A7 based PON Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
---
Changes in v2:
- Move COUNTER_FREQUENCY to bcm6846 defconfig
MAINTAINERS | 1 +
arch/arm/dts/Makefile | 2 +
arch/arm/dts/bcm6846.dtsi | 103 ++++++++++++++++++++++++++
arch/arm/dts/bcm96846.dts | 30 ++++++++
arch/arm/mach-bcmbca/Kconfig | 8 ++
arch/arm/mach-bcmbca/Makefile | 1 +
arch/arm/mach-bcmbca/bcm6846/Kconfig | 17 +++++
arch/arm/mach-bcmbca/bcm6846/Makefile | 5 ++
board/broadcom/bcmbca/Kconfig | 7 ++
configs/bcm96846_defconfig | 23 ++++++
include/configs/bcm96846.h | 11 +++
11 files changed, 208 insertions(+)
create mode 100644 arch/arm/dts/bcm6846.dtsi
create mode 100644 arch/arm/dts/bcm96846.dts
create mode 100644 arch/arm/mach-bcmbca/bcm6846/Kconfig
create mode 100644 arch/arm/mach-bcmbca/bcm6846/Makefile
create mode 100644 configs/bcm96846_defconfig
create mode 100644 include/configs/bcm96846.h
diff --git a/MAINTAINERS b/MAINTAINERS
index a01d2b69b260..b0fde1cb7285 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -219,6 +219,7 @@ F: board/broadcom/bcmbca/
N: bcmbca
N: bcm[9]?47622
N: bcm[9]?63178
+N: bcm[9]?6846
ARM BROADCOM BCMSTB
M: Thomas Fitzsimmons <fitzsim@fitzsim.org>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 6628b1151fea..5300ae8b2a1c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1167,6 +1167,8 @@ dtb-$(CONFIG_BCM47622) += \
bcm947622.dtb
dtb-$(CONFIG_BCM63178) += \
bcm963178.dtb
+dtb-$(CONFIG_BCM6846) += \
+ bcm96846.dtb
dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
diff --git a/arch/arm/dts/bcm6846.dtsi b/arch/arm/dts/bcm6846.dtsi
new file mode 100644
index 000000000000..8aa47a2583b2
--- /dev/null
+++ b/arch/arm/dts/bcm6846.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm6846", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial@640 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x640 0x1b>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/dts/bcm96846.dts b/arch/arm/dts/bcm96846.dts
new file mode 100644
index 000000000000..c70ebccabc19
--- /dev/null
+++ b/arch/arm/dts/bcm96846.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+
+/ {
+ model = "Broadcom BCM96846 Reference Board";
+ compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig
index 99e26e4ab8c9..891ac30dbdce 100644
--- a/arch/arm/mach-bcmbca/Kconfig
+++ b/arch/arm/mach-bcmbca/Kconfig
@@ -19,7 +19,15 @@ config BCM63178
select DM_SERIAL
select PL01X_SERIAL
+config BCM6846
+ bool "Support for Broadcom 6846 Family"
+ select SYS_ARCH_TIMER
+ select CPU_V7A
+ select DM_SERIAL
+ select BCM6345_SERIAL
+
source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
+source "arch/arm/mach-bcmbca/bcm6846/Kconfig"
endif
diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile
index fdcade6bfe1a..308730407212 100644
--- a/arch/arm/mach-bcmbca/Makefile
+++ b/arch/arm/mach-bcmbca/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_BCM47622) += bcm47622/
obj-$(CONFIG_BCM63178) += bcm63178/
+obj-$(CONFIG_BCM6846) += bcm6846/
diff --git a/arch/arm/mach-bcmbca/bcm6846/Kconfig b/arch/arm/mach-bcmbca/bcm6846/Kconfig
new file mode 100644
index 000000000000..229ab88dbb0d
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm6846/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM6846
+
+config TARGET_BCM96846
+ bool "Broadcom 6846 Reference Board"
+ depends on ARCH_BCMBCA
+
+config SYS_SOC
+ default "bcm6846"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
diff --git a/arch/arm/mach-bcmbca/bcm6846/Makefile b/arch/arm/mach-bcmbca/bcm6846/Makefile
new file mode 100644
index 000000000000..beb979af7520
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm6846/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o
diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig
index 53846761b664..70ca38099fcf 100644
--- a/board/broadcom/bcmbca/Kconfig
+++ b/board/broadcom/bcmbca/Kconfig
@@ -22,3 +22,10 @@ config SYS_CONFIG_NAME
default "bcm963178"
endif
+
+if TARGET_BCM96846
+
+config SYS_CONFIG_NAME
+ default "bcm96846"
+
+endif
diff --git a/configs/bcm96846_defconfig b/configs/bcm96846_defconfig
new file mode 100644
index 000000000000..27cfb457f001
--- /dev/null
+++ b/configs/bcm96846_defconfig
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=50000000
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM6846=y
+CONFIG_TARGET_BCM96846=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm96846"
+CONFIG_IDENT_STRING=" Broadcom BCM6846"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
diff --git a/include/configs/bcm96846.h b/include/configs/bcm96846.h
new file mode 100644
index 000000000000..1d6d5d616691
--- /dev/null
+++ b/include/configs/bcm96846.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM96846_H
+#define __BCM96846_H
+
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+
+#endif
--
2.37.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v2 3/5] arm: bcmbca: add bcm6878 SoC support
2022-08-01 18:39 [PATCH v2 0/5] arm: bcmbca: add basic support for Broadcom BCA SoCs William Zhang
2022-08-01 18:39 ` [PATCH v2 1/5] arm: bcmbca: add bcm63178 SoC support William Zhang
2022-08-01 18:39 ` [PATCH v2 2/5] arm: bcmbca: add bcm6846 " William Zhang
@ 2022-08-01 18:39 ` William Zhang
2022-08-01 18:39 ` [PATCH v2 4/5] arm: bcmbca: add bcm6756 " William Zhang
2022-08-01 18:39 ` [PATCH v2 5/5] arm: bcmbca: add bcm63148 " William Zhang
4 siblings, 0 replies; 7+ messages in thread
From: William Zhang @ 2022-08-01 18:39 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: joel.peshkin, dan.beygelman, philippe.reynes, kursad.oney,
anand.gore, William Zhang, Andre Przywara, Christian Hewitt,
Fabio Estevam, Marek Vasut, Samuel Holland, Simon Glass,
Tom Rini, Tomer Yacoby, Ying-Chun Liu (PaulLiu)
[-- Attachment #1: Type: text/plain, Size: 8989 bytes --]
BCM6878 is an ARM A7 based PON Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011
uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
---
Changes in v2:
- Move COUNTER_FREQUENCY to bcm6878 defconfig
MAINTAINERS | 1 +
arch/arm/dts/Makefile | 2 +
arch/arm/dts/bcm6878.dtsi | 111 ++++++++++++++++++++++++++
arch/arm/dts/bcm96878.dts | 30 +++++++
arch/arm/mach-bcmbca/Kconfig | 8 ++
arch/arm/mach-bcmbca/Makefile | 1 +
arch/arm/mach-bcmbca/bcm6878/Kconfig | 17 ++++
arch/arm/mach-bcmbca/bcm6878/Makefile | 5 ++
board/broadcom/bcmbca/Kconfig | 7 ++
configs/bcm96878_defconfig | 23 ++++++
include/configs/bcm96878.h | 11 +++
11 files changed, 216 insertions(+)
create mode 100644 arch/arm/dts/bcm6878.dtsi
create mode 100644 arch/arm/dts/bcm96878.dts
create mode 100644 arch/arm/mach-bcmbca/bcm6878/Kconfig
create mode 100644 arch/arm/mach-bcmbca/bcm6878/Makefile
create mode 100644 configs/bcm96878_defconfig
create mode 100644 include/configs/bcm96878.h
diff --git a/MAINTAINERS b/MAINTAINERS
index b0fde1cb7285..db16d0211c52 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -220,6 +220,7 @@ N: bcmbca
N: bcm[9]?47622
N: bcm[9]?63178
N: bcm[9]?6846
+N: bcm[9]?6878
ARM BROADCOM BCMSTB
M: Thomas Fitzsimmons <fitzsim@fitzsim.org>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5300ae8b2a1c..281f92c841c0 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1169,6 +1169,8 @@ dtb-$(CONFIG_BCM63178) += \
bcm963178.dtb
dtb-$(CONFIG_BCM6846) += \
bcm96846.dtb
+dtb-$(CONFIG_BCM6878) += \
+ bcm96878.dtb
dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
diff --git a/arch/arm/dts/bcm6878.dtsi b/arch/arm/dts/bcm6878.dtsi
new file mode 100644
index 000000000000..1e8b5fa96c25
--- /dev/null
+++ b/arch/arm/dts/bcm6878.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm6878", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/dts/bcm96878.dts b/arch/arm/dts/bcm96878.dts
new file mode 100644
index 000000000000..8fbc175cb452
--- /dev/null
+++ b/arch/arm/dts/bcm96878.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+ model = "Broadcom BCM96878 Reference Board";
+ compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig
index 891ac30dbdce..5b67975c4542 100644
--- a/arch/arm/mach-bcmbca/Kconfig
+++ b/arch/arm/mach-bcmbca/Kconfig
@@ -26,8 +26,16 @@ config BCM6846
select DM_SERIAL
select BCM6345_SERIAL
+config BCM6878
+ bool "Support for Broadcom 6878 Family"
+ select SYS_ARCH_TIMER
+ select CPU_V7A
+ select DM_SERIAL
+ select PL01X_SERIAL
+
source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
source "arch/arm/mach-bcmbca/bcm6846/Kconfig"
+source "arch/arm/mach-bcmbca/bcm6878/Kconfig"
endif
diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile
index 308730407212..87710c66f9b7 100644
--- a/arch/arm/mach-bcmbca/Makefile
+++ b/arch/arm/mach-bcmbca/Makefile
@@ -6,3 +6,4 @@
obj-$(CONFIG_BCM47622) += bcm47622/
obj-$(CONFIG_BCM63178) += bcm63178/
obj-$(CONFIG_BCM6846) += bcm6846/
+obj-$(CONFIG_BCM6878) += bcm6878/
diff --git a/arch/arm/mach-bcmbca/bcm6878/Kconfig b/arch/arm/mach-bcmbca/bcm6878/Kconfig
new file mode 100644
index 000000000000..43f8942c9b1d
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm6878/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM6878
+
+config TARGET_BCM96878
+ bool "Broadcom 6878 Reference Board"
+ depends on ARCH_BCMBCA
+
+config SYS_SOC
+ default "bcm6878"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
diff --git a/arch/arm/mach-bcmbca/bcm6878/Makefile b/arch/arm/mach-bcmbca/bcm6878/Makefile
new file mode 100644
index 000000000000..beb979af7520
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm6878/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o
diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig
index 70ca38099fcf..2d95deec6666 100644
--- a/board/broadcom/bcmbca/Kconfig
+++ b/board/broadcom/bcmbca/Kconfig
@@ -16,6 +16,13 @@ config SYS_CONFIG_NAME
endif
+if TARGET_BCM96878
+
+config SYS_CONFIG_NAME
+ default "bcm96878"
+
+endif
+
if TARGET_BCM963178
config SYS_CONFIG_NAME
diff --git a/configs/bcm96878_defconfig b/configs/bcm96878_defconfig
new file mode 100644
index 000000000000..847646239ee2
--- /dev/null
+++ b/configs/bcm96878_defconfig
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=50000000
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM6878=y
+CONFIG_TARGET_BCM96878=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm96878"
+CONFIG_IDENT_STRING=" Broadcom BCM6878"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
diff --git a/include/configs/bcm96878.h b/include/configs/bcm96878.h
new file mode 100644
index 000000000000..3e23e94ac4bd
--- /dev/null
+++ b/include/configs/bcm96878.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM96878_H
+#define __BCM96878_H
+
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+
+#endif
--
2.37.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v2 4/5] arm: bcmbca: add bcm6756 SoC support
2022-08-01 18:39 [PATCH v2 0/5] arm: bcmbca: add basic support for Broadcom BCA SoCs William Zhang
` (2 preceding siblings ...)
2022-08-01 18:39 ` [PATCH v2 3/5] arm: bcmbca: add bcm6878 " William Zhang
@ 2022-08-01 18:39 ` William Zhang
2022-08-01 18:39 ` [PATCH v2 5/5] arm: bcmbca: add bcm63148 " William Zhang
4 siblings, 0 replies; 7+ messages in thread
From: William Zhang @ 2022-08-01 18:39 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: joel.peshkin, dan.beygelman, philippe.reynes, kursad.oney,
anand.gore, William Zhang, Andre Przywara, Christian Hewitt,
Fabio Estevam, Marek Vasut, Samuel Holland, Simon Glass,
Tom Rini, Tomer Yacoby, Ying-Chun Liu (PaulLiu)
[-- Attachment #1: Type: text/plain, Size: 9794 bytes --]
BCM6756 is an ARM A7 based WLAN Gateway and Access Point Broadband SoC.
It is part of the BCA(Broadband Carrier Access origin) chipset family so
it's added under ARCH_BCMBCA platform. This initial support includes a
bare-bone implementation and dts with CPU subsystem, memory and ARM
PL011 uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
---
Changes in v2:
- Move COUNTER_FREQUENCY to bcm6756 defconfig
MAINTAINERS | 1 +
arch/arm/dts/Makefile | 2 +
arch/arm/dts/bcm6756.dtsi | 130 ++++++++++++++++++++++++++
arch/arm/dts/bcm96756.dts | 30 ++++++
arch/arm/mach-bcmbca/Kconfig | 8 ++
arch/arm/mach-bcmbca/Makefile | 1 +
arch/arm/mach-bcmbca/bcm6756/Kconfig | 17 ++++
arch/arm/mach-bcmbca/bcm6756/Makefile | 5 +
board/broadcom/bcmbca/Kconfig | 15 ++-
configs/bcm96756_defconfig | 23 +++++
include/configs/bcm96756.h | 11 +++
11 files changed, 239 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/dts/bcm6756.dtsi
create mode 100644 arch/arm/dts/bcm96756.dts
create mode 100644 arch/arm/mach-bcmbca/bcm6756/Kconfig
create mode 100644 arch/arm/mach-bcmbca/bcm6756/Makefile
create mode 100644 configs/bcm96756_defconfig
create mode 100644 include/configs/bcm96756.h
diff --git a/MAINTAINERS b/MAINTAINERS
index db16d0211c52..4d4b2f2ebb94 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -219,6 +219,7 @@ F: board/broadcom/bcmbca/
N: bcmbca
N: bcm[9]?47622
N: bcm[9]?63178
+N: bcm[9]?6756
N: bcm[9]?6846
N: bcm[9]?6878
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 281f92c841c0..f00bdb19675b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1167,6 +1167,8 @@ dtb-$(CONFIG_BCM47622) += \
bcm947622.dtb
dtb-$(CONFIG_BCM63178) += \
bcm963178.dtb
+dtb-$(CONFIG_BCM6756) += \
+ bcm96756.dtb
dtb-$(CONFIG_BCM6846) += \
bcm96846.dtb
dtb-$(CONFIG_BCM6878) += \
diff --git a/arch/arm/dts/bcm6756.dtsi b/arch/arm/dts/bcm6756.dtsi
new file mode 100644
index 000000000000..ce1b59faf800
--- /dev/null
+++ b/arch/arm/dts/bcm6756.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm6756", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>,
+ <&CA7_2>, <&CA7_3>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/dts/bcm96756.dts b/arch/arm/dts/bcm96756.dts
new file mode 100644
index 000000000000..9a4a87ba9c8a
--- /dev/null
+++ b/arch/arm/dts/bcm96756.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6756.dtsi"
+
+/ {
+ model = "Broadcom BCM96756 Reference Board";
+ compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig
index 5b67975c4542..f3104116b336 100644
--- a/arch/arm/mach-bcmbca/Kconfig
+++ b/arch/arm/mach-bcmbca/Kconfig
@@ -19,6 +19,13 @@ config BCM63178
select DM_SERIAL
select PL01X_SERIAL
+config BCM6756
+ bool "Support for Broadcom 6756 Family"
+ select SYS_ARCH_TIMER
+ select CPU_V7A
+ select DM_SERIAL
+ select PL01X_SERIAL
+
config BCM6846
bool "Support for Broadcom 6846 Family"
select SYS_ARCH_TIMER
@@ -35,6 +42,7 @@ config BCM6878
source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
+source "arch/arm/mach-bcmbca/bcm6756/Kconfig"
source "arch/arm/mach-bcmbca/bcm6846/Kconfig"
source "arch/arm/mach-bcmbca/bcm6878/Kconfig"
diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile
index 87710c66f9b7..5eb483c1671c 100644
--- a/arch/arm/mach-bcmbca/Makefile
+++ b/arch/arm/mach-bcmbca/Makefile
@@ -5,5 +5,6 @@
obj-$(CONFIG_BCM47622) += bcm47622/
obj-$(CONFIG_BCM63178) += bcm63178/
+obj-$(CONFIG_BCM6756) += bcm6756/
obj-$(CONFIG_BCM6846) += bcm6846/
obj-$(CONFIG_BCM6878) += bcm6878/
diff --git a/arch/arm/mach-bcmbca/bcm6756/Kconfig b/arch/arm/mach-bcmbca/bcm6756/Kconfig
new file mode 100644
index 000000000000..c83dcd0f3e2b
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm6756/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM6756
+
+config TARGET_BCM96756
+ bool "Broadcom 6756 Reference Board"
+ depends on ARCH_BCMBCA
+
+config SYS_SOC
+ default "bcm6756"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
diff --git a/arch/arm/mach-bcmbca/bcm6756/Makefile b/arch/arm/mach-bcmbca/bcm6756/Makefile
new file mode 100644
index 000000000000..beb979af7520
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm6756/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o
diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig
index 2d95deec6666..89c02cf05418 100644
--- a/board/broadcom/bcmbca/Kconfig
+++ b/board/broadcom/bcmbca/Kconfig
@@ -16,17 +16,17 @@ config SYS_CONFIG_NAME
endif
-if TARGET_BCM96878
+if TARGET_BCM963178
config SYS_CONFIG_NAME
- default "bcm96878"
+ default "bcm963178"
endif
-if TARGET_BCM963178
+if TARGET_BCM96756
config SYS_CONFIG_NAME
- default "bcm963178"
+ default "bcm96756"
endif
@@ -36,3 +36,10 @@ config SYS_CONFIG_NAME
default "bcm96846"
endif
+
+if TARGET_BCM96878
+
+config SYS_CONFIG_NAME
+ default "bcm96878"
+
+endif
diff --git a/configs/bcm96756_defconfig b/configs/bcm96756_defconfig
new file mode 100644
index 000000000000..8152673b20d6
--- /dev/null
+++ b/configs/bcm96756_defconfig
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=50000000
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM6756=y
+CONFIG_TARGET_BCM96756=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm96756"
+CONFIG_IDENT_STRING=" Broadcom BCM6756"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
diff --git a/include/configs/bcm96756.h b/include/configs/bcm96756.h
new file mode 100644
index 000000000000..c8f32672b7d8
--- /dev/null
+++ b/include/configs/bcm96756.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM96756_H
+#define __BCM96756_H
+
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+
+#endif
--
2.37.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v2 5/5] arm: bcmbca: add bcm63148 SoC support
2022-08-01 18:39 [PATCH v2 0/5] arm: bcmbca: add basic support for Broadcom BCA SoCs William Zhang
` (3 preceding siblings ...)
2022-08-01 18:39 ` [PATCH v2 4/5] arm: bcmbca: add bcm6756 " William Zhang
@ 2022-08-01 18:39 ` William Zhang
4 siblings, 0 replies; 7+ messages in thread
From: William Zhang @ 2022-08-01 18:39 UTC (permalink / raw)
To: U-Boot Mailing List
Cc: joel.peshkin, dan.beygelman, philippe.reynes, kursad.oney,
anand.gore, William Zhang, Andre Przywara, Christian Hewitt,
Fabio Estevam, Marek Vasut, Samuel Holland, Simon Glass,
Tom Rini, Tomer Yacoby, Ying-Chun Liu (PaulLiu)
[-- Attachment #1: Type: text/plain, Size: 8946 bytes --]
BCM63148 is an Broadcom B15 based DSL Broadband SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
---
Changes in v2:
- Move COUNTER_FREQUENCY to bcm63148 defconfig
MAINTAINERS | 1 +
arch/arm/dts/Makefile | 2 +
arch/arm/dts/bcm63148.dtsi | 103 +++++++++++++++++++++++++
arch/arm/dts/bcm963148.dts | 30 +++++++
arch/arm/mach-bcmbca/Kconfig | 8 ++
arch/arm/mach-bcmbca/Makefile | 1 +
arch/arm/mach-bcmbca/bcm63148/Kconfig | 17 ++++
arch/arm/mach-bcmbca/bcm63148/Makefile | 5 ++
board/broadcom/bcmbca/Kconfig | 7 ++
configs/bcm963148_defconfig | 23 ++++++
include/configs/bcm963148.h | 11 +++
11 files changed, 208 insertions(+)
create mode 100644 arch/arm/dts/bcm63148.dtsi
create mode 100644 arch/arm/dts/bcm963148.dts
create mode 100644 arch/arm/mach-bcmbca/bcm63148/Kconfig
create mode 100644 arch/arm/mach-bcmbca/bcm63148/Makefile
create mode 100644 configs/bcm963148_defconfig
create mode 100644 include/configs/bcm963148.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 4d4b2f2ebb94..d1d13c733db4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -218,6 +218,7 @@ F: arch/arm/mach-bcmbca/
F: board/broadcom/bcmbca/
N: bcmbca
N: bcm[9]?47622
+N: bcm[9]?63148
N: bcm[9]?63178
N: bcm[9]?6756
N: bcm[9]?6846
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f00bdb19675b..b8d136bd129b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1165,6 +1165,8 @@ dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
dtb-$(CONFIG_BCM47622) += \
bcm947622.dtb
+dtb-$(CONFIG_BCM63148) += \
+ bcm963148.dtb
dtb-$(CONFIG_BCM63178) += \
bcm963178.dtb
dtb-$(CONFIG_BCM6756) += \
diff --git a/arch/arm/dts/bcm63148.dtsi b/arch/arm/dts/bcm63148.dtsi
new file mode 100644
index 000000000000..df5307b6b3af
--- /dev/null
+++ b/arch/arm/dts/bcm63148.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm63148", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ B15_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "brcm,brahma-b15";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B15_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "brcm,brahma-b15";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&B15_0>, <&B15_1>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@80030000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80030000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xfffe8000 0x8000>;
+
+ uart0: serial@600 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x600 0x20>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/dts/bcm963148.dts b/arch/arm/dts/bcm963148.dts
new file mode 100644
index 000000000000..98f6a6d09f50
--- /dev/null
+++ b/arch/arm/dts/bcm963148.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63148.dtsi"
+
+/ {
+ model = "Broadcom BCM963148 Reference Board";
+ compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig
index f3104116b336..9a29c4186bf0 100644
--- a/arch/arm/mach-bcmbca/Kconfig
+++ b/arch/arm/mach-bcmbca/Kconfig
@@ -12,6 +12,13 @@ config BCM47622
select DM_SERIAL
select PL01X_SERIAL
+config BCM63148
+ bool "Support for Broadcom 63148 Family"
+ select SYS_ARCH_TIMER
+ select CPU_V7A
+ select DM_SERIAL
+ select BCM6345_SERIAL
+
config BCM63178
bool "Support for Broadcom 63178 Family"
select SYS_ARCH_TIMER
@@ -41,6 +48,7 @@ config BCM6878
select PL01X_SERIAL
source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
+source "arch/arm/mach-bcmbca/bcm63148/Kconfig"
source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
source "arch/arm/mach-bcmbca/bcm6756/Kconfig"
source "arch/arm/mach-bcmbca/bcm6846/Kconfig"
diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile
index 5eb483c1671c..8a22f9ad975d 100644
--- a/arch/arm/mach-bcmbca/Makefile
+++ b/arch/arm/mach-bcmbca/Makefile
@@ -4,6 +4,7 @@
#
obj-$(CONFIG_BCM47622) += bcm47622/
+obj-$(CONFIG_BCM63148) += bcm63148/
obj-$(CONFIG_BCM63178) += bcm63178/
obj-$(CONFIG_BCM6756) += bcm6756/
obj-$(CONFIG_BCM6846) += bcm6846/
diff --git a/arch/arm/mach-bcmbca/bcm63148/Kconfig b/arch/arm/mach-bcmbca/bcm63148/Kconfig
new file mode 100644
index 000000000000..f81504c25cbb
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm63148/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM63148
+
+config TARGET_BCM963148
+ bool "Broadcom 63148 Reference Board"
+ depends on ARCH_BCMBCA
+
+config SYS_SOC
+ default "bcm63148"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
diff --git a/arch/arm/mach-bcmbca/bcm63148/Makefile b/arch/arm/mach-bcmbca/bcm63148/Makefile
new file mode 100644
index 000000000000..beb979af7520
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm63148/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o
diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig
index 89c02cf05418..d070ebab707e 100644
--- a/board/broadcom/bcmbca/Kconfig
+++ b/board/broadcom/bcmbca/Kconfig
@@ -16,6 +16,13 @@ config SYS_CONFIG_NAME
endif
+if TARGET_BCM963148
+
+config SYS_CONFIG_NAME
+ default "bcm963148"
+
+endif
+
if TARGET_BCM963178
config SYS_CONFIG_NAME
diff --git a/configs/bcm963148_defconfig b/configs/bcm963148_defconfig
new file mode 100644
index 000000000000..6ddb45c27b07
--- /dev/null
+++ b/configs/bcm963148_defconfig
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=50000000
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM63148=y
+CONFIG_TARGET_BCM963148=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm963148"
+CONFIG_IDENT_STRING=" Broadcom BCM63148"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
diff --git a/include/configs/bcm963148.h b/include/configs/bcm963148.h
new file mode 100644
index 000000000000..5a24cccba108
--- /dev/null
+++ b/include/configs/bcm963148.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM963148_H
+#define __BCM963148_H
+
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+
+#endif
--
2.37.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
^ permalink raw reply related [flat|nested] 7+ messages in thread