[PATCH 09/10] scsi: Convert scsi_decide_disposition to use SCSIML_STAT

[Mike Christie <michael.christie@oracle.com>]

Don't use:

DID_TARGET_FAILURE
DID_NEXUS_FAILURE
DID_ALLOC_FAILURE
DID_MEDIUM_ERROR

Instead use the scsi-ml internal values.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
---
 drivers/scsi/scsi_error.c | 12 ++++++------
 drivers/scsi/scsi_lib.c   | 24 +++++-------------------
 2 files changed, 11 insertions(+), 25 deletions(-)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 4adadd3fb410..dd6a31dce3eb 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -649,7 +649,7 @@ enum scsi_disposition scsi_check_sense(struct scsi_cmnd *scmd)
 	case DATA_PROTECT:
 		if (sshdr.asc == 0x27 && sshdr.ascq == 0x07) {
 			/* Thin provisioning hard threshold reached */
-			set_host_byte(scmd, DID_ALLOC_FAILURE);
+			set_scsi_ml_byte(scmd, SCSIML_STAT_SPACE_ALLOC);
 			return SUCCESS;
 		}
 		fallthrough;
@@ -657,14 +657,14 @@ enum scsi_disposition scsi_check_sense(struct scsi_cmnd *scmd)
 	case VOLUME_OVERFLOW:
 	case MISCOMPARE:
 	case BLANK_CHECK:
-		set_host_byte(scmd, DID_TARGET_FAILURE);
+		set_scsi_ml_byte(scmd, SCSIML_STAT_TGT_FAILURE);
 		return SUCCESS;
 
 	case MEDIUM_ERROR:
 		if (sshdr.asc == 0x11 || /* UNRECOVERED READ ERR */
 		    sshdr.asc == 0x13 || /* AMNF DATA FIELD */
 		    sshdr.asc == 0x14) { /* RECORD NOT FOUND */
-			set_host_byte(scmd, DID_MEDIUM_ERROR);
+			set_scsi_ml_byte(scmd, SCSIML_STAT_MED_ERROR);
 			return SUCCESS;
 		}
 		return NEEDS_RETRY;
@@ -673,7 +673,7 @@ enum scsi_disposition scsi_check_sense(struct scsi_cmnd *scmd)
 		if (scmd->device->retry_hwerror)
 			return ADD_TO_MLQUEUE;
 		else
-			set_host_byte(scmd, DID_TARGET_FAILURE);
+			set_scsi_ml_byte(scmd, SCSIML_STAT_TGT_FAILURE);
 		fallthrough;
 
 	case ILLEGAL_REQUEST:
@@ -683,7 +683,7 @@ enum scsi_disposition scsi_check_sense(struct scsi_cmnd *scmd)
 		    sshdr.asc == 0x24 || /* Invalid field in cdb */
 		    sshdr.asc == 0x26 || /* Parameter value invalid */
 		    sshdr.asc == 0x27) { /* Write protected */
-			set_host_byte(scmd, DID_TARGET_FAILURE);
+			set_scsi_ml_byte(scmd, SCSIML_STAT_TGT_FAILURE);
 		}
 		return SUCCESS;
 
@@ -1988,7 +1988,7 @@ enum scsi_disposition scsi_decide_disposition(struct scsi_cmnd *scmd)
 	case SAM_STAT_RESERVATION_CONFLICT:
 		sdev_printk(KERN_INFO, scmd->device,
 			    "reservation conflict\n");
-		set_host_byte(scmd, DID_NEXUS_FAILURE);
+		set_scsi_ml_byte(scmd, SCSIML_STAT_RESV_CONFLICT);
 		return SUCCESS; /* causes immediate i/o error */
 	}
 	return FAILED;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index eaf4865a2cb6..92a643ff64e4 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -583,13 +583,11 @@ static inline u8 get_scsi_ml_byte(int result)
 
 /**
  * scsi_result_to_blk_status - translate a SCSI result code into blk_status_t
- * @cmd:	SCSI command
  * @result:	scsi error code
  *
- * Translate a SCSI result code into a blk_status_t value. May reset the host
- * byte of @cmd->result.
+ * Translate a SCSI result code into a blk_status_t value.
  */
-static blk_status_t scsi_result_to_blk_status(struct scsi_cmnd *cmd, int result)
+static blk_status_t scsi_result_to_blk_status(int result)
 {
 	/*
 	 * Check the scsi-ml byte first in case we converted a host or status
@@ -616,18 +614,6 @@ static blk_status_t scsi_result_to_blk_status(struct scsi_cmnd *cmd, int result)
 	case DID_TRANSPORT_FAILFAST:
 	case DID_TRANSPORT_MARGINAL:
 		return BLK_STS_TRANSPORT;
-	case DID_TARGET_FAILURE:
-		set_host_byte(cmd, DID_OK);
-		return BLK_STS_TARGET;
-	case DID_NEXUS_FAILURE:
-		set_host_byte(cmd, DID_OK);
-		return BLK_STS_NEXUS;
-	case DID_ALLOC_FAILURE:
-		set_host_byte(cmd, DID_OK);
-		return BLK_STS_NOSPC;
-	case DID_MEDIUM_ERROR:
-		set_host_byte(cmd, DID_OK);
-		return BLK_STS_MEDIUM;
 	default:
 		return BLK_STS_IOERR;
 	}
@@ -715,7 +701,7 @@ static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result)
 	if (sense_valid)
 		sense_current = !scsi_sense_is_deferred(&sshdr);
 
-	blk_stat = scsi_result_to_blk_status(cmd, result);
+	blk_stat = scsi_result_to_blk_status(result);
 
 	if (host_byte(result) == DID_RESET) {
 		/* Third party bus reset or reset for error recovery
@@ -893,14 +879,14 @@ static int scsi_io_completion_nz_result(struct scsi_cmnd *cmd, int result,
 					     SCSI_SENSE_BUFFERSIZE);
 		}
 		if (sense_current)
-			*blk_statp = scsi_result_to_blk_status(cmd, result);
+			*blk_statp = scsi_result_to_blk_status(result);
 	} else if (blk_rq_bytes(req) == 0 && sense_current) {
 		/*
 		 * Flush commands do not transfers any data, and thus cannot use
 		 * good_bytes != blk_rq_bytes(req) as the signal for an error.
 		 * This sets *blk_statp explicitly for the problem case.
 		 */
-		*blk_statp = scsi_result_to_blk_status(cmd, result);
+		*blk_statp = scsi_result_to_blk_status(result);
 	}
 	/*
 	 * Recovered errors need reporting, but they're always treated as
-- 
2.25.1