All of lore.kernel.org
 help / color / mirror / Atom feed
From: Colin Ian King <colin.i.king@gmail.com>
To: Robert Jarzmik <robert.jarzmik@free.fr>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	linux-mtd@lists.infradead.org
Cc: kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] mtd: devices: docg3: Use correct function names in comment blocks
Date: Fri,  5 Aug 2022 18:54:23 +0100	[thread overview]
Message-ID: <20220805175423.2374939-1-colin.i.king@gmail.com> (raw)

The incorrect function name is being used in the comment for functions
doc_set_reliable_mode, doc_read_seek and docg3_probe. Correct these
comments.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
---
 drivers/mtd/devices/docg3.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 5b0ae5ddad74..a7bddf80751b 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -300,7 +300,7 @@ static void doc_write_data_area(struct docg3 *docg3, const void *buf, int len)
 }
 
 /**
- * doc_set_data_mode - Sets the flash to normal or reliable data mode
+ * doc_set_reliable_mode - Sets the flash to normal or reliable data mode
  * @docg3: the device
  *
  * The reliable data mode is a bit slower than the fast mode, but less errors
@@ -442,7 +442,7 @@ static void doc_setup_writeaddr_sector(struct docg3 *docg3, int sector, int ofs)
 }
 
 /**
- * doc_seek - Set both flash planes to the specified block, page for reading
+ * doc_read_seek - Set both flash planes to the specified block, page for reading
  * @docg3: the device
  * @block0: the first plane block index
  * @block1: the second plane block index
@@ -1951,7 +1951,7 @@ static int docg3_suspend(struct platform_device *pdev, pm_message_t state)
 }
 
 /**
- * doc_probe - Probe the IO space for a DiskOnChip G3 chip
+ * docg3_probe - Probe the IO space for a DiskOnChip G3 chip
  * @pdev: platform device
  *
  * Probes for a G3 chip at the specified IO space in the platform data
-- 
2.35.3


WARNING: multiple messages have this Message-ID (diff)
From: Colin Ian King <colin.i.king@gmail.com>
To: Robert Jarzmik <robert.jarzmik@free.fr>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	linux-mtd@lists.infradead.org
Cc: kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] mtd: devices: docg3: Use correct function names in comment blocks
Date: Fri,  5 Aug 2022 18:54:23 +0100	[thread overview]
Message-ID: <20220805175423.2374939-1-colin.i.king@gmail.com> (raw)

The incorrect function name is being used in the comment for functions
doc_set_reliable_mode, doc_read_seek and docg3_probe. Correct these
comments.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
---
 drivers/mtd/devices/docg3.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 5b0ae5ddad74..a7bddf80751b 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -300,7 +300,7 @@ static void doc_write_data_area(struct docg3 *docg3, const void *buf, int len)
 }
 
 /**
- * doc_set_data_mode - Sets the flash to normal or reliable data mode
+ * doc_set_reliable_mode - Sets the flash to normal or reliable data mode
  * @docg3: the device
  *
  * The reliable data mode is a bit slower than the fast mode, but less errors
@@ -442,7 +442,7 @@ static void doc_setup_writeaddr_sector(struct docg3 *docg3, int sector, int ofs)
 }
 
 /**
- * doc_seek - Set both flash planes to the specified block, page for reading
+ * doc_read_seek - Set both flash planes to the specified block, page for reading
  * @docg3: the device
  * @block0: the first plane block index
  * @block1: the second plane block index
@@ -1951,7 +1951,7 @@ static int docg3_suspend(struct platform_device *pdev, pm_message_t state)
 }
 
 /**
- * doc_probe - Probe the IO space for a DiskOnChip G3 chip
+ * docg3_probe - Probe the IO space for a DiskOnChip G3 chip
  * @pdev: platform device
  *
  * Probes for a G3 chip at the specified IO space in the platform data
-- 
2.35.3


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

             reply	other threads:[~2022-08-05 17:54 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-05 17:54 Colin Ian King [this message]
2022-08-05 17:54 ` [PATCH] mtd: devices: docg3: Use correct function names in comment blocks Colin Ian King
2022-09-19 16:15 ` Miquel Raynal
2022-09-19 16:15   ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220805175423.2374939-1-colin.i.king@gmail.com \
    --to=colin.i.king@gmail.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=robert.jarzmik@free.fr \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.