[PATCH 0/6] ASoC: qcom: add support for sc8280xp machine

[PATCH 0/6] ASoC: qcom: add support for sc8280xp machine

[Srinivas Kandagatla]

THis patchset adds support for SC8280XP SoC machine driver.

First patch moves some of the commonly used code to common from sm8250 machine driver
and the follow on code adds minimal support for sc8280xp.

Currently this driver is only tested with SmartSpeakers and Headset
on Lenovo Thinkpad X13s.

Support for sm8450 is tested and I will post the patches soon.

Thanks,
Srini

Srinivas Kandagatla (3):
  ASoC: dt-bindings: qcom,sm8250: add compatibles for sm8450 and sm8250
  ASoC: qcom: sm8250: move some code to common
  ASoC: qcom: add machine driver for sc8280xp

 .../bindings/sound/qcom,sm8250.yaml           |   2 +
 sound/soc/qcom/Kconfig                        |  11 ++
 sound/soc/qcom/Makefile                       |   2 +
 sound/soc/qcom/common.c                       | 169 ++++++++++++++++++
 sound/soc/qcom/common.h                       |  12 ++
 sound/soc/qcom/sc8280xp.c                     | 157 ++++++++++++++++
 sound/soc/qcom/sm8250.c                       | 152 +---------------
 7 files changed, 360 insertions(+), 145 deletions(-)
 create mode 100644 sound/soc/qcom/sc8280xp.c

-- 
2.21.0

[PATCH 0/6] ASoC: qcom: add support for sc8280xp machine

[Srinivas Kandagatla]

THis patchset adds support for SC8280XP SoC machine driver.

First patch moves some of the commonly used code to common from sm8250 machine driver
and the follow on code adds minimal support for sc8280xp.

Currently this driver is only tested with SmartSpeakers and Headset
on Lenovo Thinkpad X13s.

Support for sm8450 is tested and I will post the patches soon.

Thanks,
Srini

Srinivas Kandagatla (3):
  ASoC: dt-bindings: qcom,sm8250: add compatibles for sm8450 and sm8250
  ASoC: qcom: sm8250: move some code to common
  ASoC: qcom: add machine driver for sc8280xp

 .../bindings/sound/qcom,sm8250.yaml           |   2 +
 sound/soc/qcom/Kconfig                        |  11 ++
 sound/soc/qcom/Makefile                       |   2 +
 sound/soc/qcom/common.c                       | 169 ++++++++++++++++++
 sound/soc/qcom/common.h                       |  12 ++
 sound/soc/qcom/sc8280xp.c                     | 157 ++++++++++++++++
 sound/soc/qcom/sm8250.c                       | 152 +---------------
 7 files changed, 360 insertions(+), 145 deletions(-)
 create mode 100644 sound/soc/qcom/sc8280xp.c

-- 
2.21.0

[PATCH 1/3] ASoC: dt-bindings: qcom,sm8250: add compatibles for sm8450 and sm8250

[Srinivas Kandagatla]

Add compatibles for sm8450 and sm8250xp based soundcards.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 Documentation/devicetree/bindings/sound/qcom,sm8250.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
index e6e27d09783e..317340215c24 100644
--- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@@ -23,6 +23,8 @@ properties:
       - qcom,sdm845-sndcard
       - qcom,sm8250-sndcard
       - qcom,qrb5165-rb5-sndcard
+      - qcom,sm8450-sndcard
+      - qcom,sc8280xp-sndcard
 
   audio-routing:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
-- 
2.21.0

[PATCH 1/3] ASoC: dt-bindings: qcom, sm8250: add compatibles for sm8450 and sm8250

[Srinivas Kandagatla]

Add compatibles for sm8450 and sm8250xp based soundcards.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 Documentation/devicetree/bindings/sound/qcom,sm8250.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
index e6e27d09783e..317340215c24 100644
--- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@@ -23,6 +23,8 @@ properties:
       - qcom,sdm845-sndcard
       - qcom,sm8250-sndcard
       - qcom,qrb5165-rb5-sndcard
+      - qcom,sm8450-sndcard
+      - qcom,sc8280xp-sndcard
 
   audio-routing:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
-- 
2.21.0

[PATCH 2/3] ASoC: qcom: sm8250: move some code to common

[Srinivas Kandagatla]

SM8450 machine driver code can be reused across multiple Qualcomm SoCs,
Atleast another 2 of them for now (SM8450 and SM8250XP).

Move some of the common SoundWire stream specific code to common file
so that other drivers can use it instead of duplicating.

This patch is to prepare the common driver to be able to add new SoCs support
with less dupication.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/common.c | 169 ++++++++++++++++++++++++++++++++++++++++
 sound/soc/qcom/common.h |  12 +++
 sound/soc/qcom/sm8250.c | 152 ++----------------------------------
 3 files changed, 188 insertions(+), 145 deletions(-)

diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c
index c407684ce1a2..8d1582733b6c 100644
--- a/sound/soc/qcom/common.c
+++ b/sound/soc/qcom/common.c
@@ -3,6 +3,9 @@
 // Copyright (c) 2018, The Linux Foundation. All rights reserved.
 
 #include <linux/module.h>
+#include <sound/jack.h>
+#include <linux/input-event-codes.h>
+#include "qdsp6/q6afe.h"
 #include "common.h"
 
 int qcom_snd_parse_of(struct snd_soc_card *card)
@@ -177,4 +180,170 @@ int qcom_snd_parse_of(struct snd_soc_card *card)
 }
 EXPORT_SYMBOL(qcom_snd_parse_of);
 
+int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream,
+			 struct sdw_stream_runtime *sruntime,
+			 bool *stream_prepared)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	int ret;
+
+	if (!sruntime)
+		return 0;
+
+	switch (cpu_dai->id) {
+	case WSA_CODEC_DMA_RX_0:
+	case WSA_CODEC_DMA_RX_1:
+	case RX_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_1:
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		break;
+	default:
+		return 0;
+	}
+
+	if (*stream_prepared) {
+		sdw_disable_stream(sruntime);
+		sdw_deprepare_stream(sruntime);
+		*stream_prepared = false;
+	}
+
+	ret = sdw_prepare_stream(sruntime);
+	if (ret)
+		return ret;
+
+	/**
+	 * NOTE: there is a strict hw requirement about the ordering of port
+	 * enables and actual WSA881x PA enable. PA enable should only happen
+	 * after soundwire ports are enabled if not DC on the line is
+	 * accumulated resulting in Click/Pop Noise
+	 * PA enable/mute are handled as part of codec DAPM and digital mute.
+	 */
+
+	ret = sdw_enable_stream(sruntime);
+	if (ret) {
+		sdw_deprepare_stream(sruntime);
+		return ret;
+	}
+	*stream_prepared  = true;
+
+	return ret;
+}
+EXPORT_SYMBOL(qcom_snd_sdw_prepare);
+
+int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params,
+			   struct sdw_stream_runtime **psruntime)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct sdw_stream_runtime *sruntime;
+	int i;
+
+	switch (cpu_dai->id) {
+	case WSA_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_1:
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		for_each_rtd_codec_dais(rtd, i, codec_dai) {
+			sruntime = snd_soc_dai_get_stream(codec_dai, substream->stream);
+			if (sruntime != ERR_PTR(-ENOTSUPP))
+				*psruntime = sruntime;
+		}
+		break;
+	}
+
+	return 0;
+
+}
+EXPORT_SYMBOL(qcom_snd_sdw_hw_params);
+
+int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream,
+			 struct sdw_stream_runtime *sruntime, bool *stream_prepared)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+
+	switch (cpu_dai->id) {
+	case WSA_CODEC_DMA_RX_0:
+	case WSA_CODEC_DMA_RX_1:
+	case RX_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_1:
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		if (sruntime && *stream_prepared) {
+			sdw_disable_stream(sruntime);
+			sdw_deprepare_stream(sruntime);
+			*stream_prepared = false;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(qcom_snd_sdw_hw_free);
+
+int qcom_snd_wcd_jack_setup(struct snd_soc_pcm_runtime *rtd,
+			    struct snd_soc_jack *jack, bool *jack_setup)
+{
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_card *card = rtd->card;
+	int rval, i;
+
+	if (!*jack_setup) {
+		rval = snd_soc_card_jack_new(card, "Headset Jack",
+					     SND_JACK_HEADSET | SND_JACK_LINEOUT |
+					     SND_JACK_MECHANICAL |
+					     SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					     SND_JACK_BTN_2 | SND_JACK_BTN_3 |
+					     SND_JACK_BTN_4 | SND_JACK_BTN_5,
+					     jack);
+
+		if (rval < 0) {
+			dev_err(card->dev, "Unable to add Headphone Jack\n");
+			return rval;
+		}
+
+		snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_MEDIA);
+		snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+		snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+		snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+		*jack_setup = true;
+	}
+
+	switch (cpu_dai->id) {
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		for_each_rtd_codec_dais(rtd, i, codec_dai) {
+			rval = snd_soc_component_set_jack(codec_dai->component,
+							  jack, NULL);
+			if (rval != 0 && rval != -ENOTSUPP) {
+				dev_warn(card->dev, "Failed to set jack: %d\n", rval);
+				return rval;
+			}
+		}
+
+		break;
+	default:
+		break;
+	}
+
+
+	return 0;
+}
+EXPORT_SYMBOL(qcom_snd_wcd_jack_setup);
 MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/qcom/common.h b/sound/soc/qcom/common.h
index f05c05b12bd7..0ab8d13ef44e 100644
--- a/sound/soc/qcom/common.h
+++ b/sound/soc/qcom/common.h
@@ -5,7 +5,19 @@
 #define __QCOM_SND_COMMON_H__
 
 #include <sound/soc.h>
+#include <linux/soundwire/sdw.h>
 
 int qcom_snd_parse_of(struct snd_soc_card *card);
+int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream,
+			 struct sdw_stream_runtime *runtime,
+			 bool *stream_prepared);
+int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params,
+			   struct sdw_stream_runtime **psruntime);
+int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream,
+			 struct sdw_stream_runtime *sruntime,
+			 bool *stream_prepared);
+int qcom_snd_wcd_jack_setup(struct snd_soc_pcm_runtime *rtd,
+			    struct snd_soc_jack *jack, bool *jack_setup);
 
 #endif
diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c
index 98a2fde9e004..8dbe9ef41b1c 100644
--- a/sound/soc/qcom/sm8250.c
+++ b/sound/soc/qcom/sm8250.c
@@ -27,57 +27,8 @@ struct sm8250_snd_data {
 static int sm8250_snd_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct sm8250_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
-	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
-	struct snd_soc_card *card = rtd->card;
-	int rval, i;
-
-	if (!data->jack_setup) {
-		struct snd_jack *jack;
-
-		rval = snd_soc_card_jack_new(card, "Headset Jack",
-					     SND_JACK_HEADSET | SND_JACK_LINEOUT |
-					     SND_JACK_MECHANICAL |
-					     SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-					     SND_JACK_BTN_2 | SND_JACK_BTN_3 |
-					     SND_JACK_BTN_4 | SND_JACK_BTN_5,
-					     &data->jack);
-
-		if (rval < 0) {
-			dev_err(card->dev, "Unable to add Headphone Jack\n");
-			return rval;
-		}
-
-		jack = data->jack.jack;
-
-		snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_MEDIA);
-		snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
-		snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
-		snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
-		data->jack_setup = true;
-	}
-
-	switch (cpu_dai->id) {
-	case TX_CODEC_DMA_TX_0:
-	case TX_CODEC_DMA_TX_1:
-	case TX_CODEC_DMA_TX_2:
-	case TX_CODEC_DMA_TX_3:
-		for_each_rtd_codec_dais(rtd, i, codec_dai) {
-			rval = snd_soc_component_set_jack(codec_dai->component,
-							  &data->jack, NULL);
-			if (rval != 0 && rval != -ENOTSUPP) {
-				dev_warn(card->dev, "Failed to set jack: %d\n", rval);
-				return rval;
-			}
-		}
-
-		break;
-	default:
-		break;
-	}
 
-
-	return 0;
+	return qcom_snd_wcd_jack_setup(rtd, &data->jack, &data->jack_setup);
 }
 
 static int sm8250_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
@@ -121,92 +72,21 @@ static int sm8250_snd_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai;
 	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct sm8250_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
-	struct sdw_stream_runtime *sruntime;
-	int i;
-
-	switch (cpu_dai->id) {
-	case WSA_CODEC_DMA_RX_0:
-	case RX_CODEC_DMA_RX_0:
-	case RX_CODEC_DMA_RX_1:
-	case TX_CODEC_DMA_TX_0:
-	case TX_CODEC_DMA_TX_1:
-	case TX_CODEC_DMA_TX_2:
-	case TX_CODEC_DMA_TX_3:
-		for_each_rtd_codec_dais(rtd, i, codec_dai) {
-			sruntime = snd_soc_dai_get_stream(codec_dai,
-							  substream->stream);
-			if (sruntime != ERR_PTR(-ENOTSUPP))
-				pdata->sruntime[cpu_dai->id] = sruntime;
-		}
-		break;
-	}
-
-	return 0;
 
+	return qcom_snd_sdw_hw_params(substream, params, &pdata->sruntime[cpu_dai->id]);
 }
 
-static int sm8250_snd_wsa_dma_prepare(struct snd_pcm_substream *substream)
+static int sm8250_snd_prepare(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct sm8250_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
 	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
-	int ret;
-
-	if (!sruntime)
-		return 0;
 
-	if (data->stream_prepared[cpu_dai->id]) {
-		sdw_disable_stream(sruntime);
-		sdw_deprepare_stream(sruntime);
-		data->stream_prepared[cpu_dai->id] = false;
-	}
-
-	ret = sdw_prepare_stream(sruntime);
-	if (ret)
-		return ret;
-
-	/**
-	 * NOTE: there is a strict hw requirement about the ordering of port
-	 * enables and actual WSA881x PA enable. PA enable should only happen
-	 * after soundwire ports are enabled if not DC on the line is
-	 * accumulated resulting in Click/Pop Noise
-	 * PA enable/mute are handled as part of codec DAPM and digital mute.
-	 */
-
-	ret = sdw_enable_stream(sruntime);
-	if (ret) {
-		sdw_deprepare_stream(sruntime);
-		return ret;
-	}
-	data->stream_prepared[cpu_dai->id]  = true;
-
-	return ret;
-}
-
-static int sm8250_snd_prepare(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
-
-	switch (cpu_dai->id) {
-	case WSA_CODEC_DMA_RX_0:
-	case WSA_CODEC_DMA_RX_1:
-	case RX_CODEC_DMA_RX_0:
-	case RX_CODEC_DMA_RX_1:
-	case TX_CODEC_DMA_TX_0:
-	case TX_CODEC_DMA_TX_1:
-	case TX_CODEC_DMA_TX_2:
-	case TX_CODEC_DMA_TX_3:
-		return sm8250_snd_wsa_dma_prepare(substream);
-	default:
-		break;
-	}
-
-	return 0;
+	return qcom_snd_sdw_prepare(substream, sruntime,
+				    &data->stream_prepared[cpu_dai->id]);
 }
 
 static int sm8250_snd_hw_free(struct snd_pcm_substream *substream)
@@ -216,26 +96,8 @@ static int sm8250_snd_hw_free(struct snd_pcm_substream *substream)
 	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
 
-	switch (cpu_dai->id) {
-	case WSA_CODEC_DMA_RX_0:
-	case WSA_CODEC_DMA_RX_1:
-	case RX_CODEC_DMA_RX_0:
-	case RX_CODEC_DMA_RX_1:
-	case TX_CODEC_DMA_TX_0:
-	case TX_CODEC_DMA_TX_1:
-	case TX_CODEC_DMA_TX_2:
-	case TX_CODEC_DMA_TX_3:
-		if (sruntime && data->stream_prepared[cpu_dai->id]) {
-			sdw_disable_stream(sruntime);
-			sdw_deprepare_stream(sruntime);
-			data->stream_prepared[cpu_dai->id] = false;
-		}
-		break;
-	default:
-		break;
-	}
-
-	return 0;
+	return qcom_snd_sdw_hw_free(substream, sruntime,
+				    &data->stream_prepared[cpu_dai->id]);
 }
 
 static const struct snd_soc_ops sm8250_be_ops = {
-- 
2.21.0

[PATCH 2/3] ASoC: qcom: sm8250: move some code to common

[Srinivas Kandagatla]

SM8450 machine driver code can be reused across multiple Qualcomm SoCs,
Atleast another 2 of them for now (SM8450 and SM8250XP).

Move some of the common SoundWire stream specific code to common file
so that other drivers can use it instead of duplicating.

This patch is to prepare the common driver to be able to add new SoCs support
with less dupication.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/common.c | 169 ++++++++++++++++++++++++++++++++++++++++
 sound/soc/qcom/common.h |  12 +++
 sound/soc/qcom/sm8250.c | 152 ++----------------------------------
 3 files changed, 188 insertions(+), 145 deletions(-)

diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c
index c407684ce1a2..8d1582733b6c 100644
--- a/sound/soc/qcom/common.c
+++ b/sound/soc/qcom/common.c
@@ -3,6 +3,9 @@
 // Copyright (c) 2018, The Linux Foundation. All rights reserved.
 
 #include <linux/module.h>
+#include <sound/jack.h>
+#include <linux/input-event-codes.h>
+#include "qdsp6/q6afe.h"
 #include "common.h"
 
 int qcom_snd_parse_of(struct snd_soc_card *card)
@@ -177,4 +180,170 @@ int qcom_snd_parse_of(struct snd_soc_card *card)
 }
 EXPORT_SYMBOL(qcom_snd_parse_of);
 
+int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream,
+			 struct sdw_stream_runtime *sruntime,
+			 bool *stream_prepared)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	int ret;
+
+	if (!sruntime)
+		return 0;
+
+	switch (cpu_dai->id) {
+	case WSA_CODEC_DMA_RX_0:
+	case WSA_CODEC_DMA_RX_1:
+	case RX_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_1:
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		break;
+	default:
+		return 0;
+	}
+
+	if (*stream_prepared) {
+		sdw_disable_stream(sruntime);
+		sdw_deprepare_stream(sruntime);
+		*stream_prepared = false;
+	}
+
+	ret = sdw_prepare_stream(sruntime);
+	if (ret)
+		return ret;
+
+	/**
+	 * NOTE: there is a strict hw requirement about the ordering of port
+	 * enables and actual WSA881x PA enable. PA enable should only happen
+	 * after soundwire ports are enabled if not DC on the line is
+	 * accumulated resulting in Click/Pop Noise
+	 * PA enable/mute are handled as part of codec DAPM and digital mute.
+	 */
+
+	ret = sdw_enable_stream(sruntime);
+	if (ret) {
+		sdw_deprepare_stream(sruntime);
+		return ret;
+	}
+	*stream_prepared  = true;
+
+	return ret;
+}
+EXPORT_SYMBOL(qcom_snd_sdw_prepare);
+
+int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params,
+			   struct sdw_stream_runtime **psruntime)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct sdw_stream_runtime *sruntime;
+	int i;
+
+	switch (cpu_dai->id) {
+	case WSA_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_1:
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		for_each_rtd_codec_dais(rtd, i, codec_dai) {
+			sruntime = snd_soc_dai_get_stream(codec_dai, substream->stream);
+			if (sruntime != ERR_PTR(-ENOTSUPP))
+				*psruntime = sruntime;
+		}
+		break;
+	}
+
+	return 0;
+
+}
+EXPORT_SYMBOL(qcom_snd_sdw_hw_params);
+
+int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream,
+			 struct sdw_stream_runtime *sruntime, bool *stream_prepared)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+
+	switch (cpu_dai->id) {
+	case WSA_CODEC_DMA_RX_0:
+	case WSA_CODEC_DMA_RX_1:
+	case RX_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_1:
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		if (sruntime && *stream_prepared) {
+			sdw_disable_stream(sruntime);
+			sdw_deprepare_stream(sruntime);
+			*stream_prepared = false;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(qcom_snd_sdw_hw_free);
+
+int qcom_snd_wcd_jack_setup(struct snd_soc_pcm_runtime *rtd,
+			    struct snd_soc_jack *jack, bool *jack_setup)
+{
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_card *card = rtd->card;
+	int rval, i;
+
+	if (!*jack_setup) {
+		rval = snd_soc_card_jack_new(card, "Headset Jack",
+					     SND_JACK_HEADSET | SND_JACK_LINEOUT |
+					     SND_JACK_MECHANICAL |
+					     SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					     SND_JACK_BTN_2 | SND_JACK_BTN_3 |
+					     SND_JACK_BTN_4 | SND_JACK_BTN_5,
+					     jack);
+
+		if (rval < 0) {
+			dev_err(card->dev, "Unable to add Headphone Jack\n");
+			return rval;
+		}
+
+		snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_MEDIA);
+		snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+		snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+		snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+		*jack_setup = true;
+	}
+
+	switch (cpu_dai->id) {
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		for_each_rtd_codec_dais(rtd, i, codec_dai) {
+			rval = snd_soc_component_set_jack(codec_dai->component,
+							  jack, NULL);
+			if (rval != 0 && rval != -ENOTSUPP) {
+				dev_warn(card->dev, "Failed to set jack: %d\n", rval);
+				return rval;
+			}
+		}
+
+		break;
+	default:
+		break;
+	}
+
+
+	return 0;
+}
+EXPORT_SYMBOL(qcom_snd_wcd_jack_setup);
 MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/qcom/common.h b/sound/soc/qcom/common.h
index f05c05b12bd7..0ab8d13ef44e 100644
--- a/sound/soc/qcom/common.h
+++ b/sound/soc/qcom/common.h
@@ -5,7 +5,19 @@
 #define __QCOM_SND_COMMON_H__
 
 #include <sound/soc.h>
+#include <linux/soundwire/sdw.h>
 
 int qcom_snd_parse_of(struct snd_soc_card *card);
+int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream,
+			 struct sdw_stream_runtime *runtime,
+			 bool *stream_prepared);
+int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params,
+			   struct sdw_stream_runtime **psruntime);
+int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream,
+			 struct sdw_stream_runtime *sruntime,
+			 bool *stream_prepared);
+int qcom_snd_wcd_jack_setup(struct snd_soc_pcm_runtime *rtd,
+			    struct snd_soc_jack *jack, bool *jack_setup);
 
 #endif
diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c
index 98a2fde9e004..8dbe9ef41b1c 100644
--- a/sound/soc/qcom/sm8250.c
+++ b/sound/soc/qcom/sm8250.c
@@ -27,57 +27,8 @@ struct sm8250_snd_data {
 static int sm8250_snd_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct sm8250_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
-	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
-	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
-	struct snd_soc_card *card = rtd->card;
-	int rval, i;
-
-	if (!data->jack_setup) {
-		struct snd_jack *jack;
-
-		rval = snd_soc_card_jack_new(card, "Headset Jack",
-					     SND_JACK_HEADSET | SND_JACK_LINEOUT |
-					     SND_JACK_MECHANICAL |
-					     SND_JACK_BTN_0 | SND_JACK_BTN_1 |
-					     SND_JACK_BTN_2 | SND_JACK_BTN_3 |
-					     SND_JACK_BTN_4 | SND_JACK_BTN_5,
-					     &data->jack);
-
-		if (rval < 0) {
-			dev_err(card->dev, "Unable to add Headphone Jack\n");
-			return rval;
-		}
-
-		jack = data->jack.jack;
-
-		snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_MEDIA);
-		snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
-		snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
-		snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
-		data->jack_setup = true;
-	}
-
-	switch (cpu_dai->id) {
-	case TX_CODEC_DMA_TX_0:
-	case TX_CODEC_DMA_TX_1:
-	case TX_CODEC_DMA_TX_2:
-	case TX_CODEC_DMA_TX_3:
-		for_each_rtd_codec_dais(rtd, i, codec_dai) {
-			rval = snd_soc_component_set_jack(codec_dai->component,
-							  &data->jack, NULL);
-			if (rval != 0 && rval != -ENOTSUPP) {
-				dev_warn(card->dev, "Failed to set jack: %d\n", rval);
-				return rval;
-			}
-		}
-
-		break;
-	default:
-		break;
-	}
 
-
-	return 0;
+	return qcom_snd_wcd_jack_setup(rtd, &data->jack, &data->jack_setup);
 }
 
 static int sm8250_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
@@ -121,92 +72,21 @@ static int sm8250_snd_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai;
 	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct sm8250_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
-	struct sdw_stream_runtime *sruntime;
-	int i;
-
-	switch (cpu_dai->id) {
-	case WSA_CODEC_DMA_RX_0:
-	case RX_CODEC_DMA_RX_0:
-	case RX_CODEC_DMA_RX_1:
-	case TX_CODEC_DMA_TX_0:
-	case TX_CODEC_DMA_TX_1:
-	case TX_CODEC_DMA_TX_2:
-	case TX_CODEC_DMA_TX_3:
-		for_each_rtd_codec_dais(rtd, i, codec_dai) {
-			sruntime = snd_soc_dai_get_stream(codec_dai,
-							  substream->stream);
-			if (sruntime != ERR_PTR(-ENOTSUPP))
-				pdata->sruntime[cpu_dai->id] = sruntime;
-		}
-		break;
-	}
-
-	return 0;
 
+	return qcom_snd_sdw_hw_params(substream, params, &pdata->sruntime[cpu_dai->id]);
 }
 
-static int sm8250_snd_wsa_dma_prepare(struct snd_pcm_substream *substream)
+static int sm8250_snd_prepare(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct sm8250_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
 	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
-	int ret;
-
-	if (!sruntime)
-		return 0;
 
-	if (data->stream_prepared[cpu_dai->id]) {
-		sdw_disable_stream(sruntime);
-		sdw_deprepare_stream(sruntime);
-		data->stream_prepared[cpu_dai->id] = false;
-	}
-
-	ret = sdw_prepare_stream(sruntime);
-	if (ret)
-		return ret;
-
-	/**
-	 * NOTE: there is a strict hw requirement about the ordering of port
-	 * enables and actual WSA881x PA enable. PA enable should only happen
-	 * after soundwire ports are enabled if not DC on the line is
-	 * accumulated resulting in Click/Pop Noise
-	 * PA enable/mute are handled as part of codec DAPM and digital mute.
-	 */
-
-	ret = sdw_enable_stream(sruntime);
-	if (ret) {
-		sdw_deprepare_stream(sruntime);
-		return ret;
-	}
-	data->stream_prepared[cpu_dai->id]  = true;
-
-	return ret;
-}
-
-static int sm8250_snd_prepare(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
-
-	switch (cpu_dai->id) {
-	case WSA_CODEC_DMA_RX_0:
-	case WSA_CODEC_DMA_RX_1:
-	case RX_CODEC_DMA_RX_0:
-	case RX_CODEC_DMA_RX_1:
-	case TX_CODEC_DMA_TX_0:
-	case TX_CODEC_DMA_TX_1:
-	case TX_CODEC_DMA_TX_2:
-	case TX_CODEC_DMA_TX_3:
-		return sm8250_snd_wsa_dma_prepare(substream);
-	default:
-		break;
-	}
-
-	return 0;
+	return qcom_snd_sdw_prepare(substream, sruntime,
+				    &data->stream_prepared[cpu_dai->id]);
 }
 
 static int sm8250_snd_hw_free(struct snd_pcm_substream *substream)
@@ -216,26 +96,8 @@ static int sm8250_snd_hw_free(struct snd_pcm_substream *substream)
 	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
 	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
 
-	switch (cpu_dai->id) {
-	case WSA_CODEC_DMA_RX_0:
-	case WSA_CODEC_DMA_RX_1:
-	case RX_CODEC_DMA_RX_0:
-	case RX_CODEC_DMA_RX_1:
-	case TX_CODEC_DMA_TX_0:
-	case TX_CODEC_DMA_TX_1:
-	case TX_CODEC_DMA_TX_2:
-	case TX_CODEC_DMA_TX_3:
-		if (sruntime && data->stream_prepared[cpu_dai->id]) {
-			sdw_disable_stream(sruntime);
-			sdw_deprepare_stream(sruntime);
-			data->stream_prepared[cpu_dai->id] = false;
-		}
-		break;
-	default:
-		break;
-	}
-
-	return 0;
+	return qcom_snd_sdw_hw_free(substream, sruntime,
+				    &data->stream_prepared[cpu_dai->id]);
 }
 
 static const struct snd_soc_ops sm8250_be_ops = {
-- 
2.21.0

[PATCH 3/3] ASoC: qcom: add machine driver for sc8280xp

[Srinivas Kandagatla]

Add machine driver for sc8280xp SoC.

This intial supports only includes WSA883x Speakers and WCD938x based headset.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/Kconfig    |  11 +++
 sound/soc/qcom/Makefile   |   2 +
 sound/soc/qcom/sc8280xp.c | 157 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 170 insertions(+)
 create mode 100644 sound/soc/qcom/sc8280xp.c

diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 750653404ba3..d0e59e07b1fc 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -173,6 +173,17 @@ config SND_SOC_SM8250
 	  SM8250 SoC-based systems.
 	  Say Y if you want to use audio device on this SoCs.
 
+config SND_SOC_SC8280XP
+	tristate "SoC Machine driver for SC8280XP boards"
+	depends on QCOM_APR && SOUNDWIRE
+	depends on COMMON_CLK
+	select SND_SOC_QDSP6
+	select SND_SOC_QCOM_COMMON
+	help
+	  To add support for audio on Qualcomm Technologies Inc.
+	  SC8280XP SoC-based systems.
+	  Say Y if you want to use audio device on this SoCs.
+
 config SND_SOC_SC7180
 	tristate "SoC Machine driver for SC7180 boards"
 	depends on I2C && GPIOLIB
diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
index 8b7b876899a8..8b97172cf990 100644
--- a/sound/soc/qcom/Makefile
+++ b/sound/soc/qcom/Makefile
@@ -26,6 +26,7 @@ snd-soc-sc7180-objs := sc7180.o
 snd-soc-sc7280-objs := sc7280.o
 snd-soc-sdm845-objs := sdm845.o
 snd-soc-sm8250-objs := sm8250.o
+snd-soc-sc8280xp-objs := sc8280xp.o
 snd-soc-qcom-common-objs := common.o
 
 obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
@@ -33,6 +34,7 @@ obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
 obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
 obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
 obj-$(CONFIG_SND_SOC_SC7280) += snd-soc-sc7280.o
+obj-$(CONFIG_SND_SOC_SC8280XP) += snd-soc-sc8280xp.o
 obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
 obj-$(CONFIG_SND_SOC_SM8250) += snd-soc-sm8250.o
 obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c
new file mode 100644
index 000000000000..ade44ad7c585
--- /dev/null
+++ b/sound/soc/qcom/sc8280xp.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2022, Linaro Limited
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/pcm.h>
+#include <linux/soundwire/sdw.h>
+#include <sound/jack.h>
+#include <linux/input-event-codes.h>
+#include "qdsp6/q6afe.h"
+#include "common.h"
+
+#define DRIVER_NAME		"sc8280xp"
+
+struct sc8280xp_snd_data {
+	bool stream_prepared[AFE_PORT_MAX];
+	struct snd_soc_card *card;
+	struct sdw_stream_runtime *sruntime[AFE_PORT_MAX];
+	struct snd_soc_jack jack;
+	bool jack_setup;
+};
+
+static int sc8280xp_snd_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct sc8280xp_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+
+	return qcom_snd_wcd_jack_setup(rtd, &data->jack, &data->jack_setup);
+}
+
+static int sc8280xp_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
+				     struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_interval *rate = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_RATE);
+	struct snd_interval *channels = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_CHANNELS);
+
+	rate->min = rate->max = 48000;
+	channels->min = 2;
+	channels->max = 2;
+	switch (cpu_dai->id) {
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		channels->min = 1;
+		break;
+	default:
+		break;
+	}
+
+
+	return 0;
+}
+
+static int sc8280xp_snd_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct sc8280xp_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
+
+	return qcom_snd_sdw_hw_params(substream, params, &pdata->sruntime[cpu_dai->id]);
+}
+
+static int sc8280xp_snd_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct sc8280xp_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+
+	return qcom_snd_sdw_prepare(substream, sruntime,
+				    &data->stream_prepared[cpu_dai->id]);
+}
+
+static int sc8280xp_snd_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct sc8280xp_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+
+	return qcom_snd_sdw_hw_free(substream, sruntime,
+				    &data->stream_prepared[cpu_dai->id]);
+}
+
+static const struct snd_soc_ops sc8280xp_be_ops = {
+	.hw_params = sc8280xp_snd_hw_params,
+	.hw_free = sc8280xp_snd_hw_free,
+	.prepare = sc8280xp_snd_prepare,
+};
+
+static void sc8280xp_add_be_ops(struct snd_soc_card *card)
+{
+	struct snd_soc_dai_link *link;
+	int i;
+
+	for_each_card_prelinks(card, i, link) {
+		if (link->no_pcm == 1) {
+			link->init = sc8280xp_snd_init;
+			link->be_hw_params_fixup = sc8280xp_be_hw_params_fixup;
+			link->ops = &sc8280xp_be_ops;
+		}
+	}
+}
+
+static int sc8280xp_platform_probe(struct platform_device *pdev)
+{
+	struct snd_soc_card *card;
+	struct sc8280xp_snd_data *data;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL);
+	if (!card)
+		return -ENOMEM;
+	card->owner = THIS_MODULE;
+	/* Allocate the private data */
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	card->dev = dev;
+	dev_set_drvdata(dev, card);
+	snd_soc_card_set_drvdata(card, data);
+	ret = qcom_snd_parse_of(card);
+	if (ret)
+		return ret;
+
+	card->driver_name = DRIVER_NAME;
+	sc8280xp_add_be_ops(card);
+	return devm_snd_soc_register_card(dev, card);
+}
+
+static const struct of_device_id snd_sc8280xp_dt_match[] = {
+	{.compatible = "qcom,sc8280xp-sndcard",},
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, snd_sc8280xp_dt_match);
+
+static struct platform_driver snd_sc8280xp_driver = {
+	.probe  = sc8280xp_platform_probe,
+	.driver = {
+		.name = "snd-sc8280xp",
+		.of_match_table = snd_sc8280xp_dt_match,
+	},
+};
+module_platform_driver(snd_sc8280xp_driver);
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org");
+MODULE_DESCRIPTION("SC8280XP ASoC Machine Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.21.0

[PATCH 3/3] ASoC: qcom: add machine driver for sc8280xp

[Srinivas Kandagatla]

Add machine driver for sc8280xp SoC.

This intial supports only includes WSA883x Speakers and WCD938x based headset.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/Kconfig    |  11 +++
 sound/soc/qcom/Makefile   |   2 +
 sound/soc/qcom/sc8280xp.c | 157 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 170 insertions(+)
 create mode 100644 sound/soc/qcom/sc8280xp.c

diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 750653404ba3..d0e59e07b1fc 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -173,6 +173,17 @@ config SND_SOC_SM8250
 	  SM8250 SoC-based systems.
 	  Say Y if you want to use audio device on this SoCs.
 
+config SND_SOC_SC8280XP
+	tristate "SoC Machine driver for SC8280XP boards"
+	depends on QCOM_APR && SOUNDWIRE
+	depends on COMMON_CLK
+	select SND_SOC_QDSP6
+	select SND_SOC_QCOM_COMMON
+	help
+	  To add support for audio on Qualcomm Technologies Inc.
+	  SC8280XP SoC-based systems.
+	  Say Y if you want to use audio device on this SoCs.
+
 config SND_SOC_SC7180
 	tristate "SoC Machine driver for SC7180 boards"
 	depends on I2C && GPIOLIB
diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
index 8b7b876899a8..8b97172cf990 100644
--- a/sound/soc/qcom/Makefile
+++ b/sound/soc/qcom/Makefile
@@ -26,6 +26,7 @@ snd-soc-sc7180-objs := sc7180.o
 snd-soc-sc7280-objs := sc7280.o
 snd-soc-sdm845-objs := sdm845.o
 snd-soc-sm8250-objs := sm8250.o
+snd-soc-sc8280xp-objs := sc8280xp.o
 snd-soc-qcom-common-objs := common.o
 
 obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
@@ -33,6 +34,7 @@ obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
 obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
 obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
 obj-$(CONFIG_SND_SOC_SC7280) += snd-soc-sc7280.o
+obj-$(CONFIG_SND_SOC_SC8280XP) += snd-soc-sc8280xp.o
 obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
 obj-$(CONFIG_SND_SOC_SM8250) += snd-soc-sm8250.o
 obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c
new file mode 100644
index 000000000000..ade44ad7c585
--- /dev/null
+++ b/sound/soc/qcom/sc8280xp.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2022, Linaro Limited
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/pcm.h>
+#include <linux/soundwire/sdw.h>
+#include <sound/jack.h>
+#include <linux/input-event-codes.h>
+#include "qdsp6/q6afe.h"
+#include "common.h"
+
+#define DRIVER_NAME		"sc8280xp"
+
+struct sc8280xp_snd_data {
+	bool stream_prepared[AFE_PORT_MAX];
+	struct snd_soc_card *card;
+	struct sdw_stream_runtime *sruntime[AFE_PORT_MAX];
+	struct snd_soc_jack jack;
+	bool jack_setup;
+};
+
+static int sc8280xp_snd_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct sc8280xp_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+
+	return qcom_snd_wcd_jack_setup(rtd, &data->jack, &data->jack_setup);
+}
+
+static int sc8280xp_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
+				     struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_interval *rate = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_RATE);
+	struct snd_interval *channels = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_CHANNELS);
+
+	rate->min = rate->max = 48000;
+	channels->min = 2;
+	channels->max = 2;
+	switch (cpu_dai->id) {
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		channels->min = 1;
+		break;
+	default:
+		break;
+	}
+
+
+	return 0;
+}
+
+static int sc8280xp_snd_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct sc8280xp_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
+
+	return qcom_snd_sdw_hw_params(substream, params, &pdata->sruntime[cpu_dai->id]);
+}
+
+static int sc8280xp_snd_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct sc8280xp_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+
+	return qcom_snd_sdw_prepare(substream, sruntime,
+				    &data->stream_prepared[cpu_dai->id]);
+}
+
+static int sc8280xp_snd_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct sc8280xp_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+
+	return qcom_snd_sdw_hw_free(substream, sruntime,
+				    &data->stream_prepared[cpu_dai->id]);
+}
+
+static const struct snd_soc_ops sc8280xp_be_ops = {
+	.hw_params = sc8280xp_snd_hw_params,
+	.hw_free = sc8280xp_snd_hw_free,
+	.prepare = sc8280xp_snd_prepare,
+};
+
+static void sc8280xp_add_be_ops(struct snd_soc_card *card)
+{
+	struct snd_soc_dai_link *link;
+	int i;
+
+	for_each_card_prelinks(card, i, link) {
+		if (link->no_pcm == 1) {
+			link->init = sc8280xp_snd_init;
+			link->be_hw_params_fixup = sc8280xp_be_hw_params_fixup;
+			link->ops = &sc8280xp_be_ops;
+		}
+	}
+}
+
+static int sc8280xp_platform_probe(struct platform_device *pdev)
+{
+	struct snd_soc_card *card;
+	struct sc8280xp_snd_data *data;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL);
+	if (!card)
+		return -ENOMEM;
+	card->owner = THIS_MODULE;
+	/* Allocate the private data */
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	card->dev = dev;
+	dev_set_drvdata(dev, card);
+	snd_soc_card_set_drvdata(card, data);
+	ret = qcom_snd_parse_of(card);
+	if (ret)
+		return ret;
+
+	card->driver_name = DRIVER_NAME;
+	sc8280xp_add_be_ops(card);
+	return devm_snd_soc_register_card(dev, card);
+}
+
+static const struct of_device_id snd_sc8280xp_dt_match[] = {
+	{.compatible = "qcom,sc8280xp-sndcard",},
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, snd_sc8280xp_dt_match);
+
+static struct platform_driver snd_sc8280xp_driver = {
+	.probe  = sc8280xp_platform_probe,
+	.driver = {
+		.name = "snd-sc8280xp",
+		.of_match_table = snd_sc8280xp_dt_match,
+	},
+};
+module_platform_driver(snd_sc8280xp_driver);
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org");
+MODULE_DESCRIPTION("SC8280XP ASoC Machine Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.21.0

Re: [PATCH 1/3] ASoC: dt-bindings: qcom,sm8250: add compatibles for sm8450 and sm8250

[Rob Herring]

On Thu, Aug 18, 2022 at 02:58:15PM +0100, Srinivas Kandagatla wrote:
> Add compatibles for sm8450 and sm8250xp based soundcards.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  Documentation/devicetree/bindings/sound/qcom,sm8250.yaml | 2 ++
>  1 file changed, 2 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 1/3] ASoC: dt-bindings: qcom,sm8250: add compatibles for sm8450 and sm8250

[Rob Herring]

On Thu, Aug 18, 2022 at 02:58:15PM +0100, Srinivas Kandagatla wrote:
> Add compatibles for sm8450 and sm8250xp based soundcards.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  Documentation/devicetree/bindings/sound/qcom,sm8250.yaml | 2 ++
>  1 file changed, 2 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 2/3] ASoC: qcom: sm8250: move some code to common

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 268 bytes --]

On Thu, Aug 18, 2022 at 02:58:16PM +0100, Srinivas Kandagatla wrote:

> +	}
> +	*stream_prepared  = true;
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(qcom_snd_sdw_prepare);

The ASoC framework is all EXPORT_SYMBOL_GPL(), things that depend
directly on it should be too.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 2/3] ASoC: qcom: sm8250: move some code to common

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 268 bytes --]

On Thu, Aug 18, 2022 at 02:58:16PM +0100, Srinivas Kandagatla wrote:

> +	}
> +	*stream_prepared  = true;
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(qcom_snd_sdw_prepare);

The ASoC framework is all EXPORT_SYMBOL_GPL(), things that depend
directly on it should be too.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 2/3] ASoC: qcom: sm8250: move some code to common

[Srinivas Kandagatla]

On 19/08/2022 11:51, Mark Brown wrote:
> On Thu, Aug 18, 2022 at 02:58:16PM +0100, Srinivas Kandagatla wrote:
> 
>> +	}
>> +	*stream_prepared  = true;
>> +
>> +	return ret;
>> +}
>> +EXPORT_SYMBOL(qcom_snd_sdw_prepare);
> 
> The ASoC framework is all EXPORT_SYMBOL_GPL(), things that depend
> directly on it should be too.
thanks, I agree, there are already 3 symbols that are exported without 
_GPL, I will fix them too  in next spin.

thanks,
srini

Re: [PATCH 2/3] ASoC: qcom: sm8250: move some code to common

[Srinivas Kandagatla]

On 19/08/2022 11:51, Mark Brown wrote:
> On Thu, Aug 18, 2022 at 02:58:16PM +0100, Srinivas Kandagatla wrote:
> 
>> +	}
>> +	*stream_prepared  = true;
>> +
>> +	return ret;
>> +}
>> +EXPORT_SYMBOL(qcom_snd_sdw_prepare);
> 
> The ASoC framework is all EXPORT_SYMBOL_GPL(), things that depend
> directly on it should be too.
thanks, I agree, there are already 3 symbols that are exported without 
_GPL, I will fix them too  in next spin.

thanks,
srini