All of lore.kernel.org
 help / color / mirror / Atom feed
From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Michael Zhu <michael.zhu@starfivetech.com>,
	Drew Fustini <drew@beagleboard.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Conor Dooley <conor.dooley@microchip.com>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@collabora.com
Subject: [PATCH v2 0/3] Enable initial support for StarFive VisionFive V1 SBC
Date: Fri,  2 Sep 2022 13:08:03 +0300	[thread overview]
Message-ID: <20220902100806.2378543-1-cristian.ciocaltea@collabora.com> (raw)

The StarFive VisionFive V1 SBC [1] is similar with the already supported
BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC.

In addition to documenting the necessary compatibles, this patch series 
moves most of the content from jh7100-beaglev-starlight.dts to a new file
jh7100-common.dtsi, to be shared between the two boards.

No other changes are required in order to successfully boot the board.

[1] https://github.com/starfive-tech/VisionFive

Changes in v2:
 - Simplified documentation by using 'enum' instead of 'const' in 
   patch 1/3, according to Conor's review
 - Added Reviewed-by tags from Conor

Cristian Ciocaltea (3):
  dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board
  riscv: dts: starfive: Add common DT for JH7100 based boards
  riscv: dts: starfive: Add StarFive VisionFive V1 device tree

 .../devicetree/bindings/riscv/starfive.yaml   |   4 +-
 arch/riscv/boot/dts/starfive/Makefile         |   2 +-
 .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +----------------
 .../boot/dts/starfive/jh7100-common.dtsi      | 161 ++++++++++++++++++
 .../jh7100-starfive-visionfive-v1.dts         |  20 +++
 5 files changed, 186 insertions(+), 154 deletions(-)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7100-common.dtsi
 create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts

-- 
2.37.2


WARNING: multiple messages have this Message-ID (diff)
From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Michael Zhu <michael.zhu@starfivetech.com>,
	Drew Fustini <drew@beagleboard.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Conor Dooley <conor.dooley@microchip.com>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@collabora.com
Subject: [PATCH v2 0/3] Enable initial support for StarFive VisionFive V1 SBC
Date: Fri,  2 Sep 2022 13:08:03 +0300	[thread overview]
Message-ID: <20220902100806.2378543-1-cristian.ciocaltea@collabora.com> (raw)

The StarFive VisionFive V1 SBC [1] is similar with the already supported
BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC.

In addition to documenting the necessary compatibles, this patch series 
moves most of the content from jh7100-beaglev-starlight.dts to a new file
jh7100-common.dtsi, to be shared between the two boards.

No other changes are required in order to successfully boot the board.

[1] https://github.com/starfive-tech/VisionFive

Changes in v2:
 - Simplified documentation by using 'enum' instead of 'const' in 
   patch 1/3, according to Conor's review
 - Added Reviewed-by tags from Conor

Cristian Ciocaltea (3):
  dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board
  riscv: dts: starfive: Add common DT for JH7100 based boards
  riscv: dts: starfive: Add StarFive VisionFive V1 device tree

 .../devicetree/bindings/riscv/starfive.yaml   |   4 +-
 arch/riscv/boot/dts/starfive/Makefile         |   2 +-
 .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +----------------
 .../boot/dts/starfive/jh7100-common.dtsi      | 161 ++++++++++++++++++
 .../jh7100-starfive-visionfive-v1.dts         |  20 +++
 5 files changed, 186 insertions(+), 154 deletions(-)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7100-common.dtsi
 create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts

-- 
2.37.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

             reply	other threads:[~2022-09-02 10:08 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-02 10:08 Cristian Ciocaltea [this message]
2022-09-02 10:08 ` [PATCH v2 0/3] Enable initial support for StarFive VisionFive V1 SBC Cristian Ciocaltea
2022-09-02 10:08 ` [PATCH v2 1/3] dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board Cristian Ciocaltea
2022-09-02 10:08   ` Cristian Ciocaltea
2022-09-08 11:32   ` Krzysztof Kozlowski
2022-09-08 11:32     ` Krzysztof Kozlowski
2022-09-02 10:08 ` [PATCH v2 2/3] riscv: dts: starfive: Add common DT for JH7100 based boards Cristian Ciocaltea
2022-09-02 10:08   ` Cristian Ciocaltea
2022-09-08 11:33   ` Krzysztof Kozlowski
2022-09-08 11:33     ` Krzysztof Kozlowski
2022-09-08 14:35     ` Cristian Ciocaltea
2022-09-08 14:35       ` Cristian Ciocaltea
2022-09-02 10:08 ` [PATCH v2 3/3] riscv: dts: starfive: Add StarFive VisionFive V1 device tree Cristian Ciocaltea
2022-09-02 10:08   ` Cristian Ciocaltea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220902100806.2378543-1-cristian.ciocaltea@collabora.com \
    --to=cristian.ciocaltea@collabora.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor.dooley@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=drew@beagleboard.org \
    --cc=kernel@collabora.com \
    --cc=kernel@esmil.dk \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=michael.zhu@starfivetech.com \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.