From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com> To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org, s.hauer@pengutronix.de Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, aisheng.dong@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com> Subject: [PATCH V4 8/8] arm64: dts: imx93: add lpspi nodes Date: Mon, 5 Sep 2022 13:59:15 +0800 [thread overview] Message-ID: <20220905055915.3878000-9-peng.fan@oss.nxp.com> (raw) In-Reply-To: <20220905055915.3878000-1-peng.fan@oss.nxp.com> From: Peng Fan <peng.fan@nxp.com> Add i.MX93 lpspi nodes Signed-off-by: Peng Fan <peng.fan@nxp.com> --- arch/arm64/boot/dts/freescale/imx93.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 1a5a6c51aec4..b3d82b13b524 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -166,6 +166,30 @@ lpi2c2: i2c@44350000 { status = "disabled"; }; + lpspi1: spi@44360000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x44360000 0x10000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPSPI1_GATE>, + <&clk IMX93_CLK_BUS_AON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi2: spi@44370000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x44370000 0x10000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPSPI2_GATE>, + <&clk IMX93_CLK_BUS_AON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + lpuart1: serial@44380000 { compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x44380000 0x1000>; -- 2.37.1
WARNING: multiple messages have this Message-ID (diff)
From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com> To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org, s.hauer@pengutronix.de Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, aisheng.dong@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com> Subject: [PATCH V4 8/8] arm64: dts: imx93: add lpspi nodes Date: Mon, 5 Sep 2022 13:59:15 +0800 [thread overview] Message-ID: <20220905055915.3878000-9-peng.fan@oss.nxp.com> (raw) In-Reply-To: <20220905055915.3878000-1-peng.fan@oss.nxp.com> From: Peng Fan <peng.fan@nxp.com> Add i.MX93 lpspi nodes Signed-off-by: Peng Fan <peng.fan@nxp.com> --- arch/arm64/boot/dts/freescale/imx93.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 1a5a6c51aec4..b3d82b13b524 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -166,6 +166,30 @@ lpi2c2: i2c@44350000 { status = "disabled"; }; + lpspi1: spi@44360000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x44360000 0x10000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPSPI1_GATE>, + <&clk IMX93_CLK_BUS_AON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi2: spi@44370000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x44370000 0x10000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPSPI2_GATE>, + <&clk IMX93_CLK_BUS_AON>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + lpuart1: serial@44380000 { compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x44380000 0x1000>; -- 2.37.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-05 6:00 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-05 5:59 [PATCH V4 0/8] arm64: dts: imx93: add several nodes Peng Fan (OSS) 2022-09-05 5:59 ` Peng Fan (OSS) 2022-09-05 5:59 ` [PATCH V4 1/8] dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers Peng Fan (OSS) 2022-09-05 5:59 ` Peng Fan (OSS) 2022-09-07 12:14 ` Krzysztof Kozlowski 2022-09-07 12:14 ` Krzysztof Kozlowski 2022-09-05 5:59 ` [PATCH V4 2/8] arm64: dts: imx93: correct SDHC clk entry Peng Fan (OSS) 2022-09-05 5:59 ` Peng Fan (OSS) 2022-09-05 5:59 ` [PATCH V4 3/8] arm64: dts: imx93: add gpio clk Peng Fan (OSS) 2022-09-05 5:59 ` Peng Fan (OSS) 2022-09-05 5:59 ` [PATCH V4 4/8] arm64: dts: imx93: add s4 mu node Peng Fan (OSS) 2022-09-05 5:59 ` Peng Fan (OSS) 2022-09-05 5:59 ` [PATCH V4 5/8] arm64: dts: imx93: add blk ctrl node Peng Fan (OSS) 2022-09-05 5:59 ` Peng Fan (OSS) 2022-09-05 5:59 ` [PATCH V4 6/8] arm64: dts: imx93: add a55 pmu Peng Fan (OSS) 2022-09-05 5:59 ` Peng Fan (OSS) 2022-09-05 5:59 ` [PATCH V4 7/8] arm64: dts: imx93: add lpi2c nodes Peng Fan (OSS) 2022-09-05 5:59 ` Peng Fan (OSS) 2022-09-05 5:59 ` Peng Fan (OSS) [this message] 2022-09-05 5:59 ` [PATCH V4 8/8] arm64: dts: imx93: add lpspi nodes Peng Fan (OSS) 2022-09-12 9:19 ` [PATCH V4 0/8] arm64: dts: imx93: add several nodes Shawn Guo 2022-09-12 9:19 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220905055915.3878000-9-peng.fan@oss.nxp.com \ --to=peng.fan@oss.nxp.com \ --cc=aisheng.dong@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=peng.fan@nxp.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.