From: Sebastian Reichel <sebastian.reichel@collabora.com> To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Lee Jones <lee@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Alessandro Zummo <a.zummo@towertech.it>, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sebastian Reichel <sebastian.reichel@collabora.com>, kernel@collabora.com Subject: [PATCHv2 02/13] mfd: rk808: use dev_err_probe Date: Thu, 8 Sep 2022 02:30:56 +0200 [thread overview] Message-ID: <20220908003107.220143-3-sebastian.reichel@collabora.com> (raw) In-Reply-To: <20220908003107.220143-1-sebastian.reichel@collabora.com> Use dev_err_probe instead of dev_err in probe function, which simplifies code a little bit and prints the error code. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- drivers/mfd/rk808.c | 50 ++++++++++++++++----------------------------- 1 file changed, 18 insertions(+), 32 deletions(-) diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c index c17fea1d48ca..e793de9146f7 100644 --- a/drivers/mfd/rk808.c +++ b/drivers/mfd/rk808.c @@ -650,18 +650,14 @@ static int rk808_probe(struct i2c_client *client, /* Read chip variant */ msb = i2c_smbus_read_byte_data(client, pmic_id_msb); - if (msb < 0) { - dev_err(&client->dev, "failed to read the chip id at 0x%x\n", - RK808_ID_MSB); - return msb; - } + if (msb < 0) + return dev_err_probe(&client->dev, msb, "failed to read the chip id at 0x%x\n", + RK808_ID_MSB); lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb); - if (lsb < 0) { - dev_err(&client->dev, "failed to read the chip id at 0x%x\n", - RK808_ID_LSB); - return lsb; - } + if (lsb < 0) + return dev_err_probe(&client->dev, lsb, "failed to read the chip id at 0x%x\n", + RK808_ID_LSB); rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK; dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant); @@ -710,44 +706,34 @@ static int rk808_probe(struct i2c_client *client, i2c_set_clientdata(client, rk808); rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg); - if (IS_ERR(rk808->regmap)) { - dev_err(&client->dev, "regmap initialization failed\n"); - return PTR_ERR(rk808->regmap); - } + if (IS_ERR(rk808->regmap)) + return dev_err_probe(&client->dev, PTR_ERR(rk808->regmap), + "regmap initialization failed\n"); - if (!client->irq) { - dev_err(&client->dev, "No interrupt support, no core IRQ\n"); - return -EINVAL; - } + if (!client->irq) + return dev_err_probe(&client->dev, -EINVAL, "No interrupt support, no core IRQ\n"); ret = devm_regmap_add_irq_chip(&client->dev, rk808->regmap, client->irq, IRQF_ONESHOT, -1, rk808->regmap_irq_chip, &rk808->irq_data); - if (ret) { - dev_err(&client->dev, "Failed to add irq_chip %d\n", ret); - return ret; - } + if (ret) + return dev_err_probe(&client->dev, ret, "Failed to add irq_chip\n"); for (i = 0; i < nr_pre_init_regs; i++) { ret = regmap_update_bits(rk808->regmap, pre_init_reg[i].addr, pre_init_reg[i].mask, pre_init_reg[i].value); - if (ret) { - dev_err(&client->dev, - "0x%x write err\n", - pre_init_reg[i].addr); - return ret; - } + if (ret) + return dev_err_probe(&client->dev, ret, "0x%x write err\n", + pre_init_reg[i].addr); } ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, cells, nr_cells, NULL, 0, regmap_irq_get_domain(rk808->irq_data)); - if (ret) { - dev_err(&client->dev, "failed to add MFD devices %d\n", ret); - return ret; - } + if (ret) + return dev_err_probe(&client->dev, ret, "failed to add MFD devices\n"); if (of_property_read_bool(np, "rockchip,system-power-controller")) { ret = devm_register_sys_off_handler(&client->dev, -- 2.35.1
WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Reichel <sebastian.reichel@collabora.com> To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Lee Jones <lee@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Alessandro Zummo <a.zummo@towertech.it>, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sebastian Reichel <sebastian.reichel@collabora.com>, kernel@collabora.com Subject: [PATCHv2 02/13] mfd: rk808: use dev_err_probe Date: Thu, 8 Sep 2022 02:30:56 +0200 [thread overview] Message-ID: <20220908003107.220143-3-sebastian.reichel@collabora.com> (raw) In-Reply-To: <20220908003107.220143-1-sebastian.reichel@collabora.com> Use dev_err_probe instead of dev_err in probe function, which simplifies code a little bit and prints the error code. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- drivers/mfd/rk808.c | 50 ++++++++++++++++----------------------------- 1 file changed, 18 insertions(+), 32 deletions(-) diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c index c17fea1d48ca..e793de9146f7 100644 --- a/drivers/mfd/rk808.c +++ b/drivers/mfd/rk808.c @@ -650,18 +650,14 @@ static int rk808_probe(struct i2c_client *client, /* Read chip variant */ msb = i2c_smbus_read_byte_data(client, pmic_id_msb); - if (msb < 0) { - dev_err(&client->dev, "failed to read the chip id at 0x%x\n", - RK808_ID_MSB); - return msb; - } + if (msb < 0) + return dev_err_probe(&client->dev, msb, "failed to read the chip id at 0x%x\n", + RK808_ID_MSB); lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb); - if (lsb < 0) { - dev_err(&client->dev, "failed to read the chip id at 0x%x\n", - RK808_ID_LSB); - return lsb; - } + if (lsb < 0) + return dev_err_probe(&client->dev, lsb, "failed to read the chip id at 0x%x\n", + RK808_ID_LSB); rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK; dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant); @@ -710,44 +706,34 @@ static int rk808_probe(struct i2c_client *client, i2c_set_clientdata(client, rk808); rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg); - if (IS_ERR(rk808->regmap)) { - dev_err(&client->dev, "regmap initialization failed\n"); - return PTR_ERR(rk808->regmap); - } + if (IS_ERR(rk808->regmap)) + return dev_err_probe(&client->dev, PTR_ERR(rk808->regmap), + "regmap initialization failed\n"); - if (!client->irq) { - dev_err(&client->dev, "No interrupt support, no core IRQ\n"); - return -EINVAL; - } + if (!client->irq) + return dev_err_probe(&client->dev, -EINVAL, "No interrupt support, no core IRQ\n"); ret = devm_regmap_add_irq_chip(&client->dev, rk808->regmap, client->irq, IRQF_ONESHOT, -1, rk808->regmap_irq_chip, &rk808->irq_data); - if (ret) { - dev_err(&client->dev, "Failed to add irq_chip %d\n", ret); - return ret; - } + if (ret) + return dev_err_probe(&client->dev, ret, "Failed to add irq_chip\n"); for (i = 0; i < nr_pre_init_regs; i++) { ret = regmap_update_bits(rk808->regmap, pre_init_reg[i].addr, pre_init_reg[i].mask, pre_init_reg[i].value); - if (ret) { - dev_err(&client->dev, - "0x%x write err\n", - pre_init_reg[i].addr); - return ret; - } + if (ret) + return dev_err_probe(&client->dev, ret, "0x%x write err\n", + pre_init_reg[i].addr); } ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, cells, nr_cells, NULL, 0, regmap_irq_get_domain(rk808->irq_data)); - if (ret) { - dev_err(&client->dev, "failed to add MFD devices %d\n", ret); - return ret; - } + if (ret) + return dev_err_probe(&client->dev, ret, "failed to add MFD devices\n"); if (of_property_read_bool(np, "rockchip,system-power-controller")) { ret = devm_register_sys_off_handler(&client->dev, -- 2.35.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2022-09-08 0:31 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-08 0:30 [PATCHv2 00/13] Introduce RK806 Support Sebastian Reichel 2022-09-08 0:30 ` Sebastian Reichel 2022-09-08 0:30 ` [PATCHv2 01/13] mfd: rk808: convert to device managed resources Sebastian Reichel 2022-09-08 0:30 ` Sebastian Reichel 2022-09-08 0:30 ` Sebastian Reichel [this message] 2022-09-08 0:30 ` [PATCHv2 02/13] mfd: rk808: use dev_err_probe Sebastian Reichel 2022-09-08 8:45 ` Robin Murphy 2022-09-08 8:45 ` Robin Murphy 2022-09-08 0:30 ` [PATCHv2 03/13] clk: RK808: reduce 'struct rk808' usage Sebastian Reichel 2022-09-08 0:30 ` Sebastian Reichel 2022-09-08 0:30 ` [PATCHv2 04/13] regulator: rk808: " Sebastian Reichel 2022-09-08 0:30 ` Sebastian Reichel 2022-09-08 0:30 ` [PATCHv2 05/13] rtc: " Sebastian Reichel 2022-09-08 0:30 ` Sebastian Reichel 2022-09-08 0:31 ` [PATCHv2 06/13] mfd: rk808: replace 'struct i2c_client' with 'struct device' Sebastian Reichel 2022-09-08 0:31 ` Sebastian Reichel 2022-09-08 0:31 ` [PATCHv2 07/13] mfd: rk808: split into core and i2c Sebastian Reichel 2022-09-08 0:31 ` Sebastian Reichel 2022-09-08 0:31 ` [PATCHv2 08/13] dt-bindings: mfd: add rk806 binding Sebastian Reichel 2022-09-08 0:31 ` Sebastian Reichel 2022-09-08 8:51 ` Krzysztof Kozlowski 2022-09-08 8:51 ` Krzysztof Kozlowski 2022-09-08 12:35 ` Rob Herring 2022-09-08 12:35 ` Rob Herring 2022-09-08 0:31 ` [PATCHv2 09/13] mfd: rk8xx: add rk806 support Sebastian Reichel 2022-09-08 0:31 ` Sebastian Reichel 2022-09-08 0:31 ` [PATCHv2 10/13] pinctrl: rk805: add rk806 pinctrl support Sebastian Reichel 2022-09-08 0:31 ` Sebastian Reichel 2022-09-08 0:31 ` [PATCHv2 11/13] regulator: rk808: Use dev_err_probe Sebastian Reichel 2022-09-08 0:31 ` Sebastian Reichel 2022-09-08 0:31 ` [PATCHv2 12/13] regulator: rk808: add rk806 support Sebastian Reichel 2022-09-08 0:31 ` Sebastian Reichel 2022-09-08 7:45 ` Matti Vaittinen 2022-09-08 7:45 ` Matti Vaittinen 2022-09-08 11:31 ` Mark Brown 2022-09-08 11:31 ` Mark Brown 2022-09-08 0:31 ` [PATCHv2 13/13] ASoC: rk817: Remove 'select REGMAP_I2C' Sebastian Reichel 2022-09-08 0:31 ` Sebastian Reichel
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220908003107.220143-3-sebastian.reichel@collabora.com \ --to=sebastian.reichel@collabora.com \ --cc=a.zummo@towertech.it \ --cc=alexandre.belloni@bootlin.com \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=kernel@collabora.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=lee@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linus.walleij@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mturquette@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.