[PATCH 4.9 00/42] 4.9.328-rc1 review

[PATCH 4.9 00/42] 4.9.328-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.328 release.
There are 42 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 15 Sep 2022 14:03:27 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.328-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.328-rc1

NeilBrown <neilb@suse.de>
    SUNRPC: use _bh spinlocking on ->transport_lock

Yang Ling <gnaygnil@gmail.com>
    MIPS: loongson32: ls1c: Fix hang during startup

Johan Hovold <johan+linaro@kernel.org>
    usb: dwc3: fix PHY disable sequence

Toke Høiland-Jørgensen <toke@toke.dk>
    sch_sfb: Also store skb len before calling child enqueue

Neal Cardwell <ncardwell@google.com>
    tcp: fix early ETIMEDOUT after spurious non-SACK RTO

Dan Carpenter <dan.carpenter@oracle.com>
    tipc: fix shift wrapping bug in map_get()

Toke Høiland-Jørgensen <toke@toke.dk>
    sch_sfb: Don't assume the skb is still around after enqueueing to child

David Leadbeater <dgl@dgl.cx>
    netfilter: nf_conntrack_irc: Fix forged IP logic

Harsh Modi <harshmodi@google.com>
    netfilter: br_netfilter: Drop dst references before setting.

Isaac J. Manjarres <isaacmanjarres@google.com>
    driver core: Don't probe devices after bus_type.match() probe deferral

Sreekanth Reddy <sreekanth.reddy@broadcom.com>
    scsi: mpt3sas: Fix use-after-free warning

Dongxiang Ke <kdx.glider@gmail.com>
    ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()

Pattara Teerapong <pteerapong@chromium.org>
    ALSA: aloop: Fix random zeros in capture data when using jiffies timer

Tasos Sahanidis <tasos@tasossah.com>
    ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc()

Yang Yingliang <yangyingliang@huawei.com>
    fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init()

Helge Deller <deller@gmx.de>
    parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines

Li Qiong <liqiong@nfschina.com>
    parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()

Zhenneng Li <lizhenneng@kylinos.cn>
    drm/radeon: add a force flush to delay work when radeon

Yee Lee <yee.lee@mediatek.com>
    Revert "mm: kmemleak: take a full lowmem check in kmemleak_*_phys()"

Linus Torvalds <torvalds@linux-foundation.org>
    fs: only do a memory barrier for the first set_buffer_uptodate()

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Fix data-race at module auto-loading

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: oss: Fix data-race for max_midi_devs access

Miquel Raynal <miquel.raynal@bootlin.com>
    net: mac802154: Fix a condition in the receive path

Siddh Raman Pant <code@siddh.me>
    wifi: mac80211: Don't finalize CSA in IBSS mode if state is disconnected

Krishna Kurapati <quic_kriskura@quicinc.com>
    usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS

Alan Stern <stern@rowland.harvard.edu>
    USB: core: Prevent nested device-reset calls

Josh Poimboeuf <jpoimboe@kernel.org>
    s390: fix nospec table alignments

Gerald Schaefer <gerald.schaefer@linux.ibm.com>
    s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepages

Witold Lipieta <witold.lipieta@thaumatec.com>
    usb-storage: Add ignore-residue quirk for NXP PN7462AU

Thierry GUIBERT <thierry.guibert@croix-rouge.fr>
    USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020)

Slark Xiao <slark_xiao@163.com>
    USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode

Yan Xinyu <sdlyyxy@bupt.edu.cn>
    USB: serial: option: add support for OPPO R11 diag port

Johan Hovold <johan@kernel.org>
    USB: serial: cp210x: add Decagon UCA device id

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: Add grace period after xHC start to prevent premature runtime suspend.

Armin Wolf <W_Armin@gmx.de>
    hwmon: (gpio-fan) Fix array out of bounds access

Niek Nooijens <niek.nooijens@omron.com>
    USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id

Helge Deller <deller@gmx.de>
    vt: Clear selection before changing the font

Dan Carpenter <dan.carpenter@oracle.com>
    staging: rtl8712: fix use after free bugs

Shenwei Wang <shenwei.wang@nxp.com>
    serial: fsl_lpuart: RS485 RTS polariy is inverse

Dan Carpenter <dan.carpenter@oracle.com>
    wifi: cfg80211: debugfs: fix return type in ht40allow_map_read()

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask

Letu Ren <fantasquex@gmail.com>
    fbdev: fb_pm2fb: Avoid potential divide by zero error


-------------

Diffstat:

 Makefile                                     |  4 +--
 arch/mips/loongson32/ls1c/board.c            |  1 -
 arch/parisc/kernel/head.S                    | 43 +++++++++++++++++++++++++++-
 arch/s390/include/asm/hugetlb.h              |  6 ++--
 arch/s390/kernel/vmlinux.lds.S               |  1 +
 arch/x86/include/asm/pmc_atom.h              |  6 ++--
 arch/x86/platform/atom/pmc_atom.c            |  2 +-
 drivers/base/dd.c                            | 10 +++++++
 drivers/gpu/drm/radeon/radeon_device.c       |  3 ++
 drivers/hwmon/gpio-fan.c                     |  3 ++
 drivers/parisc/ccio-dma.c                    | 11 +++++--
 drivers/scsi/mpt3sas/mpt3sas_scsih.c         |  2 +-
 drivers/staging/rtl8712/rtl8712_cmd.c        | 36 -----------------------
 drivers/tty/serial/fsl_lpuart.c              |  4 +--
 drivers/tty/vt/vt.c                          | 12 +++++---
 drivers/usb/class/cdc-acm.c                  |  3 ++
 drivers/usb/core/hub.c                       | 10 +++++++
 drivers/usb/dwc3/core.c                      | 20 ++++++-------
 drivers/usb/gadget/function/storage_common.c |  6 ++--
 drivers/usb/host/xhci-hub.c                  | 11 +++++++
 drivers/usb/host/xhci.c                      |  4 ++-
 drivers/usb/host/xhci.h                      |  2 +-
 drivers/usb/serial/cp210x.c                  |  1 +
 drivers/usb/serial/ftdi_sio.c                |  2 ++
 drivers/usb/serial/ftdi_sio_ids.h            |  6 ++++
 drivers/usb/serial/option.c                  | 11 +++++++
 drivers/usb/storage/unusual_devs.h           |  7 +++++
 drivers/video/fbdev/chipsfb.c                |  1 +
 drivers/video/fbdev/pm2fb.c                  |  5 ++++
 include/linux/buffer_head.h                  | 11 +++++++
 include/linux/usb.h                          |  2 ++
 mm/kmemleak.c                                |  8 +++---
 net/bridge/br_netfilter_hooks.c              |  2 ++
 net/bridge/br_netfilter_ipv6.c               |  1 +
 net/ipv4/tcp_input.c                         | 25 +++++++++++-----
 net/mac80211/ibss.c                          |  4 +++
 net/mac802154/rx.c                           |  2 +-
 net/netfilter/nf_conntrack_irc.c             |  5 ++--
 net/sched/sch_sfb.c                          | 13 +++++----
 net/sunrpc/xprt.c                            |  4 +--
 net/tipc/monitor.c                           |  2 +-
 net/wireless/debugfs.c                       |  3 +-
 sound/core/seq/oss/seq_oss_midi.c            |  2 ++
 sound/core/seq/seq_clientmgr.c               | 12 ++++----
 sound/drivers/aloop.c                        |  7 +++--
 sound/pci/emu10k1/emupcm.c                   |  2 +-
 sound/usb/stream.c                           |  2 +-
 47 files changed, 236 insertions(+), 104 deletions(-)

[PATCH 4.9 01/42] fbdev: fb_pm2fb: Avoid potential divide by zero error

[Greg Kroah-Hartman]

From: Letu Ren <fantasquex@gmail.com>

commit 19f953e7435644b81332dd632ba1b2d80b1e37af upstream.

In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be
copied from user, then go through `fb_set_var()` and
`info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`.
Along the path, `var->pixclock` won't be modified. This function checks
whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is
zero, there will be a divide by zero error. So, it is necessary to check
whether denominator is zero to avoid crash. As this bug is found by
Syzkaller, logs are listed below.

divide error in pm2fb_check_var
Call Trace:
 <TASK>
 fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015
 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/pm2fb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c
index 9b32b9fc44a5c..50b569d047b10 100644
--- a/drivers/video/fbdev/pm2fb.c
+++ b/drivers/video/fbdev/pm2fb.c
@@ -619,6 +619,11 @@ static int pm2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		return -EINVAL;
 	}
 
+	if (!var->pixclock) {
+		DPRINTK("pixclock is zero\n");
+		return -EINVAL;
+	}
+
 	if (PICOS2KHZ(var->pixclock) > PM2_MAX_PIXCLOCK) {
 		DPRINTK("pixclock too high (%ldKHz)\n",
 			PICOS2KHZ(var->pixclock));
-- 
2.35.1

Re: [PATCH 4.9 01/42] fbdev: fb_pm2fb: Avoid potential divide by zero error

[Ulrich Hecht]

> On 09/13/2022 4:07 PM CEST Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> 
>  
> From: Letu Ren <fantasquex@gmail.com>
> 
> commit 19f953e7435644b81332dd632ba1b2d80b1e37af upstream.
> 
> In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be
> copied from user, then go through `fb_set_var()` and
> `info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`.
> Along the path, `var->pixclock` won't be modified. This function checks
> whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is
> zero, there will be a divide by zero error. So, it is necessary to check
> whether denominator is zero to avoid crash. As this bug is found by
> Syzkaller, logs are listed below.
> 
> divide error in pm2fb_check_var
> Call Trace:
>  <TASK>
>  fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015
>  do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
>  fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189
> 
> Reported-by: Zheyu Ma <zheyuma97@gmail.com>
> Signed-off-by: Letu Ren <fantasquex@gmail.com>
> Signed-off-by: Helge Deller <deller@gmx.de>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/video/fbdev/pm2fb.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c
> index 9b32b9fc44a5c..50b569d047b10 100644
> --- a/drivers/video/fbdev/pm2fb.c
> +++ b/drivers/video/fbdev/pm2fb.c
> @@ -619,6 +619,11 @@ static int pm2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
>  		return -EINVAL;
>  	}
>  
> +	if (!var->pixclock) {
> +		DPRINTK("pixclock is zero\n");
> +		return -EINVAL;
> +	}
> +
>  	if (PICOS2KHZ(var->pixclock) > PM2_MAX_PIXCLOCK) {
>  		DPRINTK("pixclock too high (%ldKHz)\n",
>  			PICOS2KHZ(var->pixclock));
> -- 
> 2.35.1

This is a duplicate, the same patch has already been applied in 4.9.327 (0f1174f4972ea9fad6becf8881d71adca8e9ca91), so the above snippet of code is now in there twice.

Doesn't make a difference in functionality in this case, I just happened to notice it when reviewing backports from 4.9 for the CIP 4.4-stable tree.

CU
Uli

Re: [PATCH 4.9 01/42] fbdev: fb_pm2fb: Avoid potential divide by zero error

[Greg Kroah-Hartman]

On Wed, Nov 23, 2022 at 07:34:39AM +0100, Ulrich Hecht wrote:
> 
> > On 09/13/2022 4:07 PM CEST Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> > 
> >  
> > From: Letu Ren <fantasquex@gmail.com>
> > 
> > commit 19f953e7435644b81332dd632ba1b2d80b1e37af upstream.
> > 
> > In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be
> > copied from user, then go through `fb_set_var()` and
> > `info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`.
> > Along the path, `var->pixclock` won't be modified. This function checks
> > whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is
> > zero, there will be a divide by zero error. So, it is necessary to check
> > whether denominator is zero to avoid crash. As this bug is found by
> > Syzkaller, logs are listed below.
> > 
> > divide error in pm2fb_check_var
> > Call Trace:
> >  <TASK>
> >  fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015
> >  do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
> >  fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189
> > 
> > Reported-by: Zheyu Ma <zheyuma97@gmail.com>
> > Signed-off-by: Letu Ren <fantasquex@gmail.com>
> > Signed-off-by: Helge Deller <deller@gmx.de>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> > ---
> >  drivers/video/fbdev/pm2fb.c | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c
> > index 9b32b9fc44a5c..50b569d047b10 100644
> > --- a/drivers/video/fbdev/pm2fb.c
> > +++ b/drivers/video/fbdev/pm2fb.c
> > @@ -619,6 +619,11 @@ static int pm2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
> >  		return -EINVAL;
> >  	}
> >  
> > +	if (!var->pixclock) {
> > +		DPRINTK("pixclock is zero\n");
> > +		return -EINVAL;
> > +	}
> > +
> >  	if (PICOS2KHZ(var->pixclock) > PM2_MAX_PIXCLOCK) {
> >  		DPRINTK("pixclock too high (%ldKHz)\n",
> >  			PICOS2KHZ(var->pixclock));
> > -- 
> > 2.35.1
> 
> This is a duplicate, the same patch has already been applied in 4.9.327 (0f1174f4972ea9fad6becf8881d71adca8e9ca91), so the above snippet of code is now in there twice.
> 
> Doesn't make a difference in functionality in this case, I just happened to notice it when reviewing backports from 4.9 for the CIP 4.4-stable tree.

Good catch, want to send a revert for this to fix it up?

thanks,

greg k-h

[PATCH 4.9 02/42] platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 0a90ed8d0cfa29735a221eba14d9cb6c735d35b6 ]

On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).

Fix the mask and other related definitions accordingly.

Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/pmc_atom.h   | 6 ++++--
 arch/x86/platform/atom/pmc_atom.c | 2 +-
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/pmc_atom.h b/arch/x86/include/asm/pmc_atom.h
index aa8744c77c6d9..b25ac6eb1fdee 100644
--- a/arch/x86/include/asm/pmc_atom.h
+++ b/arch/x86/include/asm/pmc_atom.h
@@ -16,6 +16,8 @@
 #ifndef PMC_ATOM_H
 #define PMC_ATOM_H
 
+#include <linux/bits.h>
+
 /* ValleyView Power Control Unit PCI Device ID */
 #define	PCI_DEVICE_ID_VLV_PMC	0x0F1C
 /* CherryTrail Power Control Unit PCI Device ID */
@@ -148,9 +150,9 @@
 #define	ACPI_MMIO_REG_LEN	0x100
 
 #define	PM1_CNT			0x4
-#define	SLEEP_TYPE_MASK		0xFFFFECFF
+#define	SLEEP_TYPE_MASK		GENMASK(12, 10)
 #define	SLEEP_TYPE_S5		0x1C00
-#define	SLEEP_ENABLE		0x2000
+#define	SLEEP_ENABLE		BIT(13)
 
 extern int pmc_atom_read(int offset, u32 *value);
 extern int pmc_atom_write(int offset, u32 value);
diff --git a/arch/x86/platform/atom/pmc_atom.c b/arch/x86/platform/atom/pmc_atom.c
index 964ff4fc61f9b..b5b371d959141 100644
--- a/arch/x86/platform/atom/pmc_atom.c
+++ b/arch/x86/platform/atom/pmc_atom.c
@@ -213,7 +213,7 @@ static void pmc_power_off(void)
 	pm1_cnt_port = acpi_base_addr + PM1_CNT;
 
 	pm1_cnt_value = inl(pm1_cnt_port);
-	pm1_cnt_value &= SLEEP_TYPE_MASK;
+	pm1_cnt_value &= ~SLEEP_TYPE_MASK;
 	pm1_cnt_value |= SLEEP_TYPE_S5;
 	pm1_cnt_value |= SLEEP_ENABLE;
 
-- 
2.35.1

[PATCH 4.9 03/42] wifi: cfg80211: debugfs: fix return type in ht40allow_map_read()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d776763f48084926b5d9e25507a3ddb7c9243d5e ]

The return type is supposed to be ssize_t, which is signed long,
but "r" was declared as unsigned int.  This means that on 64 bit systems
we return positive values instead of negative error codes.

Fixes: 80a3511d70e8 ("cfg80211: add debugfs HT40 allow map")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YutvOQeJm0UjLhwU@kili
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/debugfs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/wireless/debugfs.c b/net/wireless/debugfs.c
index 5d453916a4179..6a7f4432440a5 100644
--- a/net/wireless/debugfs.c
+++ b/net/wireless/debugfs.c
@@ -68,9 +68,10 @@ static ssize_t ht40allow_map_read(struct file *file,
 {
 	struct wiphy *wiphy = file->private_data;
 	char *buf;
-	unsigned int offset = 0, buf_size = PAGE_SIZE, i, r;
+	unsigned int offset = 0, buf_size = PAGE_SIZE, i;
 	enum nl80211_band band;
 	struct ieee80211_supported_band *sband;
+	ssize_t r;
 
 	buf = kzalloc(buf_size, GFP_KERNEL);
 	if (!buf)
-- 
2.35.1

[PATCH 4.9 04/42] serial: fsl_lpuart: RS485 RTS polariy is inverse

[Greg Kroah-Hartman]

From: Shenwei Wang <shenwei.wang@nxp.com>

commit 846651eca073e2e02e37490a4a52752415d84781 upstream.

The setting of RS485 RTS polarity is inverse in the current driver.

When the property of 'rs485-rts-active-low' is enabled in the dts node,
the RTS signal should be LOW during sending. Otherwise, if there is no
such a property, the RTS should be HIGH during sending.

Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/fsl_lpuart.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -951,9 +951,9 @@ static int lpuart_config_rs485(struct ua
 		 * Note: UART is assumed to be active high.
 		 */
 		if (rs485->flags & SER_RS485_RTS_ON_SEND)
-			modem &= ~UARTMODEM_TXRTSPOL;
-		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
 			modem |= UARTMODEM_TXRTSPOL;
+		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+			modem &= ~UARTMODEM_TXRTSPOL;
 	}
 
 	/* Store the new configuration */

[PATCH 4.9 05/42] staging: rtl8712: fix use after free bugs

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit e230a4455ac3e9b112f0367d1b8e255e141afae0 upstream.

_Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl()
functions don't do anything except free the "pcmd" pointer.  It
results in a use after free.  Delete them.

Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Cc: stable <stable@kernel.org>
Reported-by: Zheng Wang <hackerzheng666@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Yw4ASqkYcUhUfoY2@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8712/rtl8712_cmd.c |   36 ----------------------------------
 1 file changed, 36 deletions(-)

--- a/drivers/staging/rtl8712/rtl8712_cmd.c
+++ b/drivers/staging/rtl8712/rtl8712_cmd.c
@@ -128,34 +128,6 @@ static void r871x_internal_cmd_hdl(struc
 	kfree(pdrvcmd->pbuf);
 }
 
-static u8 read_macreg_hdl(struct _adapter *padapter, u8 *pbuf)
-{
-	void (*pcmd_callback)(struct _adapter *dev, struct cmd_obj	*pcmd);
-	struct cmd_obj *pcmd  = (struct cmd_obj *)pbuf;
-
-	/*  invoke cmd->callback function */
-	pcmd_callback = cmd_callback[pcmd->cmdcode].callback;
-	if (!pcmd_callback)
-		r8712_free_cmd_obj(pcmd);
-	else
-		pcmd_callback(padapter, pcmd);
-	return H2C_SUCCESS;
-}
-
-static u8 write_macreg_hdl(struct _adapter *padapter, u8 *pbuf)
-{
-	void (*pcmd_callback)(struct _adapter *dev, struct cmd_obj	*pcmd);
-	struct cmd_obj *pcmd  = (struct cmd_obj *)pbuf;
-
-	/*  invoke cmd->callback function */
-	pcmd_callback = cmd_callback[pcmd->cmdcode].callback;
-	if (!pcmd_callback)
-		r8712_free_cmd_obj(pcmd);
-	else
-		pcmd_callback(padapter, pcmd);
-	return H2C_SUCCESS;
-}
-
 static u8 read_bbreg_hdl(struct _adapter *padapter, u8 *pbuf)
 {
 	struct cmd_obj *pcmd  = (struct cmd_obj *)pbuf;
@@ -224,14 +196,6 @@ static struct cmd_obj *cmd_hdl_filter(st
 	pcmd_r = NULL;
 
 	switch (pcmd->cmdcode) {
-	case GEN_CMD_CODE(_Read_MACREG):
-		read_macreg_hdl(padapter, (u8 *)pcmd);
-		pcmd_r = pcmd;
-		break;
-	case GEN_CMD_CODE(_Write_MACREG):
-		write_macreg_hdl(padapter, (u8 *)pcmd);
-		pcmd_r = pcmd;
-		break;
 	case GEN_CMD_CODE(_Read_BBREG):
 		read_bbreg_hdl(padapter, (u8 *)pcmd);
 		break;

[PATCH 4.9 06/42] vt: Clear selection before changing the font

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit 566f9c9f89337792070b5a6062dff448b3e7977f upstream.

When changing the console font with ioctl(KDFONTOP) the new font size
can be bigger than the previous font. A previous selection may thus now
be outside of the new screen size and thus trigger out-of-bounds
accesses to graphics memory if the selection is removed in
vc_do_resize().

Prevent such out-of-memory accesses by dropping the selection before the
various con_font_set() console handlers are called.

Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Tested-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -4183,9 +4183,11 @@ static int con_font_set(struct vc_data *
 	console_lock();
 	if (vc->vc_mode != KD_TEXT)
 		rc = -EINVAL;
-	else if (vc->vc_sw->con_font_set)
+	else if (vc->vc_sw->con_font_set) {
+		if (vc_is_sel(vc))
+			clear_selection();
 		rc = vc->vc_sw->con_font_set(vc, &font, op->flags);
-	else
+	} else
 		rc = -ENOSYS;
 	console_unlock();
 	kfree(font.data);
@@ -4212,9 +4214,11 @@ static int con_font_default(struct vc_da
 		console_unlock();
 		return -EINVAL;
 	}
-	if (vc->vc_sw->con_font_default)
+	if (vc->vc_sw->con_font_default) {
+		if (vc_is_sel(vc))
+			clear_selection();
 		rc = vc->vc_sw->con_font_default(vc, &font, s);
-	else
+	} else
 		rc = -ENOSYS;
 	console_unlock();
 	if (!rc) {

[PATCH 4.9 07/42] USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id

[Greg Kroah-Hartman]

From: Niek Nooijens <niek.nooijens@omron.com>

commit 001047ea241a9646010b2744451dfbc7289542f3 upstream.

works perfectly with:
modprobe ftdi_sio
echo "0590 00b2" | tee
/sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null

but doing this every reboot is a pain in the ass.

Signed-off-by: Niek Nooijens <niek.nooijens@omron.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c     |    2 ++
 drivers/usb/serial/ftdi_sio_ids.h |    6 ++++++
 2 files changed, 8 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1040,6 +1040,8 @@ static const struct usb_device_id id_tab
 	/* IDS GmbH devices */
 	{ USB_DEVICE(IDS_VID, IDS_SI31A_PID) },
 	{ USB_DEVICE(IDS_VID, IDS_CM31A_PID) },
+	/* Omron devices */
+	{ USB_DEVICE(OMRON_VID, OMRON_CS1W_CIF31_PID) },
 	/* U-Blox devices */
 	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
 	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -661,6 +661,12 @@
 #define INFINEON_TRIBOARD_TC2X7_PID	0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */
 
 /*
+ * Omron corporation (https://www.omron.com)
+ */
+ #define OMRON_VID			0x0590
+ #define OMRON_CS1W_CIF31_PID		0x00b2
+
+/*
  * Acton Research Corp.
  */
 #define ACTON_VID		0x0647	/* Vendor ID */

[PATCH 4.9 08/42] hwmon: (gpio-fan) Fix array out of bounds access

[Greg Kroah-Hartman]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit f233d2be38dbbb22299192292983037f01ab363c ]

The driver does not check if the cooling state passed to
gpio_fan_set_cur_state() exceeds the maximum cooling state as
stored in fan_data->num_speeds. Since the cooling state is later
used as an array index in set_fan_speed(), an array out of bounds
access can occur.
This can be exploited by setting the state of the thermal cooling device
to arbitrary values, causing for example a kernel oops when unavailable
memory is accessed this way.

Example kernel oops:
[  807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064
[  807.987369] Mem abort info:
[  807.987398]   ESR = 0x96000005
[  807.987428]   EC = 0x25: DABT (current EL), IL = 32 bits
[  807.987477]   SET = 0, FnV = 0
[  807.987507]   EA = 0, S1PTW = 0
[  807.987536]   FSC = 0x05: level 1 translation fault
[  807.987570] Data abort info:
[  807.987763]   ISV = 0, ISS = 0x00000005
[  807.987801]   CM = 0, WnR = 0
[  807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000
[  807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[  807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[  807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6
[  807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G         C        5.15.56-v8+ #1575
[  807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[  807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan]
[  807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
[  807.988691] sp : ffffffc008cf3bd0
[  807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000
[  807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920
[  807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c
[  807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000
[  807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70
[  807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[  807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c
[  807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009
[  807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8
[  807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060
[  807.989084] Call trace:
[  807.989091]  set_fan_speed.part.5+0x34/0x80 [gpio_fan]
[  807.989113]  gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
[  807.989199]  cur_state_store+0x84/0xd0
[  807.989221]  dev_attr_store+0x20/0x38
[  807.989262]  sysfs_kf_write+0x4c/0x60
[  807.989282]  kernfs_fop_write_iter+0x130/0x1c0
[  807.989298]  new_sync_write+0x10c/0x190
[  807.989315]  vfs_write+0x254/0x378
[  807.989362]  ksys_write+0x70/0xf8
[  807.989379]  __arm64_sys_write+0x24/0x30
[  807.989424]  invoke_syscall+0x4c/0x110
[  807.989442]  el0_svc_common.constprop.3+0xfc/0x120
[  807.989458]  do_el0_svc+0x2c/0x90
[  807.989473]  el0_svc+0x24/0x60
[  807.989544]  el0t_64_sync_handler+0x90/0xb8
[  807.989558]  el0t_64_sync+0x1a0/0x1a4
[  807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416)
[  807.989627] ---[ end trace 8ded4c918658445b ]---

Fix this by checking the cooling state and return an error if it
exceeds the maximum cooling state.

Tested on a Raspberry Pi 3.

Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220830011101.178843-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/gpio-fan.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index 685568b1236d4..f78e677b858e8 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -422,6 +422,9 @@ static int gpio_fan_set_cur_state(struct thermal_cooling_device *cdev,
 	if (!fan_data)
 		return -EINVAL;
 
+	if (state >= fan_data->num_speed)
+		return -EINVAL;
+
 	set_fan_speed(fan_data, state);
 	return 0;
 }
-- 
2.35.1

[PATCH 4.9 09/42] xhci: Add grace period after xHC start to prevent premature runtime suspend.

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 33e321586e37b642ad10594b9ef25a613555cd08 upstream.

After xHC controller is started, either in probe or resume, it can take
a while before any of the connected usb devices are visible to the roothub
due to link training.

It's possible xhci driver loads, sees no acivity and suspends the host
before the USB device is visible.

In one testcase with a hotplugged xHC controller the host finally detected
the connected USB device and generated a wake 500ms after host initial
start.

If hosts didn't suspend the device duringe training it probablty wouldn't
take up to 500ms to detect it, but looking at specs reveal USB3 link
training has a couple long timeout values, such as 120ms
RxDetectQuietTimeout, and 360ms PollingLFPSTimeout.

So Add a 500ms grace period that keeps polling the roothub for 500ms after
start, preventing runtime suspend until USB devices are detected.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-hub.c |   11 +++++++++++
 drivers/usb/host/xhci.c     |    4 +++-
 drivers/usb/host/xhci.h     |    2 +-
 3 files changed, 15 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1297,6 +1297,17 @@ int xhci_hub_status_data(struct usb_hcd
 
 	status = bus_state->resuming_ports;
 
+	/*
+	 * SS devices are only visible to roothub after link training completes.
+	 * Keep polling roothubs for a grace period after xHC start
+	 */
+	if (xhci->run_graceperiod) {
+		if (time_before(jiffies, xhci->run_graceperiod))
+			status = 1;
+		else
+			xhci->run_graceperiod = 0;
+	}
+
 	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC;
 
 	/* For each port, did anything change?  If so, set that bit in buf. */
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -144,9 +144,11 @@ static int xhci_start(struct xhci_hcd *x
 		xhci_err(xhci, "Host took too long to start, "
 				"waited %u microseconds.\n",
 				XHCI_MAX_HALT_USEC);
-	if (!ret)
+	if (!ret) {
 		/* clear state flags. Including dying, halted or removing */
 		xhci->xhc_state = 0;
+		xhci->run_graceperiod = jiffies + msecs_to_jiffies(500);
+	}
 
 	return ret;
 }
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1607,7 +1607,7 @@ struct xhci_hcd {
 
 	/* Host controller watchdog timer structures */
 	unsigned int		xhc_state;
-
+	unsigned long		run_graceperiod;
 	u32			command;
 	struct s3_save		s3;
 /* Host controller is dying - not responding to commands. "I'm not dead yet!"

[PATCH 4.9 10/42] USB: serial: cp210x: add Decagon UCA device id

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit ceb4038472a4803e7046ed488b03d11551991514 upstream.

Add the device id for Decagon Devices USB Cable Adapter.

Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -128,6 +128,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */
 	{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+	{ USB_DEVICE(0x10C4, 0x8414) }, /* Decagon USB Cable Adapter */
 	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
 	{ USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */

[PATCH 4.9 11/42] USB: serial: option: add support for OPPO R11 diag port

[Greg Kroah-Hartman]

From: Yan Xinyu <sdlyyxy@bupt.edu.cn>

commit 8d5fc280392735e4441b35de14f2f4860fa8d83c upstream.

Add support for OPPO R11 USB diag serial port to option driver. This
phone uses Qualcomm Snapdragon 660 SoC.

usb-devices output:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22d9 ProdID=276c Rev=04.04
S:  Manufacturer=OPPO
S:  Product=SDM660-MTP _SN:09C6BCA7
S:  SerialNumber=beb2c403
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs

Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn>
Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn
Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -569,6 +569,10 @@ static void option_instat_callback(struc
 #define WETELECOM_PRODUCT_6802			0x6802
 #define WETELECOM_PRODUCT_WMD300		0x6803
 
+/* OPPO products */
+#define OPPO_VENDOR_ID				0x22d9
+#define OPPO_PRODUCT_R11			0x276c
+
 
 /* Device flags */
 
@@ -2126,6 +2130,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */
+	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

[PATCH 4.9 12/42] USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode

[Greg Kroah-Hartman]

From: Slark Xiao <slark_xiao@163.com>

commit 8ffe20d08f2c95d702c453020d03a4c568a988f0 upstream.

We added PIDs for MV32-WA/WB MBIM mode before, now we need to add
support for RmNet mode.

Test evidence as below:
T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f3 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F3 USB Mobile Broadband
S:  SerialNumber=d7b4be8d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f4 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F4 USB Mobile Broadband
S:  SerialNumber=d095087d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Signed-off-by: Slark Xiao <slark_xiao@163.com>
[ johan: sort entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -434,6 +434,8 @@ static void option_instat_callback(struc
 #define CINTERION_PRODUCT_MV31_2_RMNET		0x00b9
 #define CINTERION_PRODUCT_MV32_WA		0x00f1
 #define CINTERION_PRODUCT_MV32_WB		0x00f2
+#define CINTERION_PRODUCT_MV32_WA_RMNET		0x00f3
+#define CINTERION_PRODUCT_MV32_WB_RMNET		0x00f4
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -1966,8 +1968,12 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(0)},
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff),
 	  .driver_info = RSVD(3)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA_RMNET, 0xff),
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff),
 	  .driver_info = RSVD(3)},
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB_RMNET, 0xff),
+	  .driver_info = RSVD(0) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),

[PATCH 4.9 13/42] USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020)

[Greg Kroah-Hartman]

From: Thierry GUIBERT <thierry.guibert@croix-rouge.fr>

commit a10bc71729b236fe36de0d8e4d35c959fd8dec3a upstream.

Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver
enabling the AT serial port.
The Vendor Id is 0x0C26
The Product ID is 0x0020

Output of lsusb :
Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            2 Communications
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0c26 Prolific Technology Inc.
  idProduct          0x0020
  bcdDevice            0.00
  iManufacturer           1 ICOM Inc.
  iProduct                2 ICOM Radio
  iSerial                 3 *obfuscated*
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0030
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Signed-off-by: Thierry GUIBERT <thierry.guibert@croix-rouge.fr>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220819081702.84118-1-thierry.guibert@croix-rouge.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1774,6 +1774,9 @@ static const struct usb_device_id acm_id
 	{ USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */
 	.driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */
 	},
+	{ USB_DEVICE(0x0c26, 0x0020), /* Icom ICF3400 Serie */
+	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+	},
 	{ USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */
 	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
 	},

[PATCH 4.9 14/42] usb-storage: Add ignore-residue quirk for NXP PN7462AU

[Greg Kroah-Hartman]

From: Witold Lipieta <witold.lipieta@thaumatec.com>

commit 2aa48857ad52236a9564c71183d6cc8893becd41 upstream.

This is USB mass storage primary boot loader for code download on
NXP PN7462AU.

Without the quirk it is impossible to write whole memory at once as
device restarts during the write due to bogus residue values reported.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Witold Lipieta <witold.lipieta@thaumatec.com>
Link: https://lore.kernel.org/r/20220809112911.462776-1-witold.lipieta@thaumatec.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_devs.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2301,6 +2301,13 @@ UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Witold Lipieta <witold.lipieta@thaumatec.com> */
+UNUSUAL_DEV( 0x1fc9, 0x0117, 0x0100, 0x0100,
+		"NXP Semiconductors",
+		"PN7462AU",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Supplied with some Castlewood ORB removable drives */
 UNUSUAL_DEV(  0x2027, 0xa001, 0x0000, 0x9999,
 		"Double-H Technology",

[PATCH 4.9 15/42] s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepages

[Greg Kroah-Hartman]

From: Gerald Schaefer <gerald.schaefer@linux.ibm.com>

commit 7c8d42fdf1a84b1a0dd60d6528309c8ec127e87c upstream.

The alignment check in prepare_hugepage_range() is wrong for 2 GB
hugepages, it only checks for 1 MB hugepage alignment.

This can result in kernel crash in __unmap_hugepage_range() at the
BUG_ON(start & ~huge_page_mask(h)) alignment check, for mappings
created with MAP_FIXED at unaligned address.

Fix this by correctly handling multiple hugepage sizes, similar to the
generic version of prepare_hugepage_range().

Fixes: d08de8e2d867 ("s390/mm: add support for 2GB hugepages")
Cc: <stable@vger.kernel.org> # 4.8+
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/include/asm/hugetlb.h |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/arch/s390/include/asm/hugetlb.h
+++ b/arch/s390/include/asm/hugetlb.h
@@ -29,9 +29,11 @@ pte_t huge_ptep_get_and_clear(struct mm_
 static inline int prepare_hugepage_range(struct file *file,
 			unsigned long addr, unsigned long len)
 {
-	if (len & ~HPAGE_MASK)
+	struct hstate *h = hstate_file(file);
+
+	if (len & ~huge_page_mask(h))
 		return -EINVAL;
-	if (addr & ~HPAGE_MASK)
+	if (addr & ~huge_page_mask(h))
 		return -EINVAL;
 	return 0;
 }

[PATCH 4.9 16/42] s390: fix nospec table alignments

[Greg Kroah-Hartman]

From: Josh Poimboeuf <jpoimboe@kernel.org>

commit c9305b6c1f52060377c72aebe3a701389e9f3172 upstream.

Add proper alignment for .nospec_call_table and .nospec_return_table in
vmlinux.

[hca@linux.ibm.com]: The problem with the missing alignment of the nospec
tables exist since a long time, however only since commit e6ed91fd0768
("s390/alternatives: remove padding generation code") and with
CONFIG_RELOCATABLE=n the kernel may also crash at boot time.

The above named commit reduced the size of struct alt_instr by one byte,
so its new size is 11 bytes. Therefore depending on the number of cpu
alternatives the size of the __alt_instructions array maybe odd, which
again also causes that the addresses of the nospec tables will be odd.

If the address of __nospec_call_start is odd and the kernel is compiled
With CONFIG_RELOCATABLE=n the compiler may generate code that loads the
address of __nospec_call_start with a 'larl' instruction.

This will generate incorrect code since the 'larl' instruction only works
with even addresses. In result the members of the nospec tables will be
accessed with an off-by-one offset, which subsequently may lead to
addressing exceptions within __nospec_revert().

Fixes: f19fbd5ed642 ("s390: introduce execute-trampolines for branches")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/8719bf1ce4a72ebdeb575200290094e9ce047bcc.1661557333.git.jpoimboe@kernel.org
Cc: <stable@vger.kernel.org> # 4.16
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/kernel/vmlinux.lds.S |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -125,6 +125,7 @@ SECTIONS
 	/*
 	 * Table with the patch locations to undo expolines
 	*/
+	. = ALIGN(4);
 	.nospec_call_table : {
 		__nospec_call_start = . ;
 		*(.s390_indirect*)

[PATCH 4.9 17/42] USB: core: Prevent nested device-reset calls

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 9c6d778800b921bde3bff3cff5003d1650f942d1 upstream.

Automatic kernel fuzzing revealed a recursive locking violation in
usb-storage:

============================================
WARNING: possible recursive locking detected
5.18.0 #3 Not tainted
--------------------------------------------
kworker/1:3/1205 is trying to acquire lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230

but task is already holding lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230

...

stack backtrace:
CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2988 [inline]
check_deadlock kernel/locking/lockdep.c:3031 [inline]
validate_chain kernel/locking/lockdep.c:3816 [inline]
__lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053
lock_acquire kernel/locking/lockdep.c:5665 [inline]
lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630
__mutex_lock_common kernel/locking/mutex.c:603 [inline]
__mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109
r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622
usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458
device_remove drivers/base/dd.c:545 [inline]
device_remove+0x11f/0x170 drivers/base/dd.c:537
__device_release_driver drivers/base/dd.c:1222 [inline]
device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248
usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627
usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118
usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114

This turned out not to be an error in usb-storage but rather a nested
device reset attempt.  That is, as the rtl8712 driver was being
unbound from a composite device in preparation for an unrelated USB
reset (that driver does not have pre_reset or post_reset callbacks),
its ->remove routine called usb_reset_device() -- thus nesting one
reset call within another.

Performing a reset as part of disconnect processing is a questionable
practice at best.  However, the bug report points out that the USB
core does not have any protection against nested resets.  Adding a
reset_in_progress flag and testing it will prevent such errors in the
future.

Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/hub.c |   10 ++++++++++
 include/linux/usb.h    |    2 ++
 2 files changed, 12 insertions(+)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5701,6 +5701,11 @@ re_enumerate_no_bos:
  * the reset is over (using their post_reset method).
  *
  * Return: The same as for usb_reset_and_verify_device().
+ * However, if a reset is already in progress (for instance, if a
+ * driver doesn't have pre_ or post_reset() callbacks, and while
+ * being unbound or re-bound during the ongoing reset its disconnect()
+ * or probe() routine tries to perform a second, nested reset), the
+ * routine returns -EINPROGRESS.
  *
  * Note:
  * The caller must own the device lock.  For example, it's safe to use
@@ -5734,6 +5739,10 @@ int usb_reset_device(struct usb_device *
 		return -EISDIR;
 	}
 
+	if (udev->reset_in_progress)
+		return -EINPROGRESS;
+	udev->reset_in_progress = 1;
+
 	port_dev = hub->ports[udev->portnum - 1];
 
 	/*
@@ -5798,6 +5807,7 @@ int usb_reset_device(struct usb_device *
 
 	usb_autosuspend_device(udev);
 	memalloc_noio_restore(noio_flag);
+	udev->reset_in_progress = 0;
 	return ret;
 }
 EXPORT_SYMBOL_GPL(usb_reset_device);
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -531,6 +531,7 @@ struct usb3_lpm_parameters {
  * @level: number of USB hub ancestors
  * @can_submit: URBs may be submitted
  * @persist_enabled:  USB_PERSIST enabled for this device
+ * @reset_in_progress: the device is being reset
  * @have_langid: whether string_langid is valid
  * @authorized: policy has said we can use it;
  *	(user space) policy determines if we authorize this device to be
@@ -609,6 +610,7 @@ struct usb_device {
 
 	unsigned can_submit:1;
 	unsigned persist_enabled:1;
+	unsigned reset_in_progress:1;
 	unsigned have_langid:1;
 	unsigned authorized:1;
 	unsigned authenticated:1;

[PATCH 4.9 18/42] usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS

[Greg Kroah-Hartman]

From: Krishna Kurapati <quic_kriskura@quicinc.com>

commit 9d4dc16ec71bd6368548e9743223e449b4377fc7 upstream.

During cdrom emulation, the response to read_toc command must contain
the cdrom address as the number of sectors (2048 byte sized blocks)
represented either as an absolute value (when MSF bit is '0') or in
terms of PMin/PSec/PFrame (when MSF bit is set to '1'). Incase of
cdrom, the fsg_lun_open call sets the sector size to 2048 bytes.

When MAC OS sends a read_toc request with MSF set to '1', the
store_cdrom_address assumes that the address being provided is the
LUN size represented in 512 byte sized blocks instead of 2048. It
tries to modify the address further to convert it to 2048 byte sized
blocks and store it in MSF format. This results in data transfer
failures as the cdrom address being provided in the read_toc response
is incorrect.

Fixes: 3f565a363cee ("usb: gadget: storage: adapt logic block size to bound block devices")
Cc: stable@vger.kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/1661570110-19127-1-git-send-email-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/storage_common.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/function/storage_common.c
+++ b/drivers/usb/gadget/function/storage_common.c
@@ -298,8 +298,10 @@ EXPORT_SYMBOL_GPL(fsg_lun_fsync_sub);
 void store_cdrom_address(u8 *dest, int msf, u32 addr)
 {
 	if (msf) {
-		/* Convert to Minutes-Seconds-Frames */
-		addr >>= 2;		/* Convert to 2048-byte frames */
+		/*
+		 * Convert to Minutes-Seconds-Frames.
+		 * Sector size is already set to 2048 bytes.
+		 */
 		addr += 2*75;		/* Lead-in occupies 2 seconds */
 		dest[3] = addr % 75;	/* Frames */
 		addr /= 75;

[PATCH 4.9 19/42] wifi: mac80211: Dont finalize CSA in IBSS mode if state is disconnected

[Greg Kroah-Hartman]

From: Siddh Raman Pant <code@siddh.me>

commit 15bc8966b6d3a5b9bfe4c9facfa02f2b69b1e5f0 upstream.

When we are not connected to a channel, sending channel "switch"
announcement doesn't make any sense.

The BSS list is empty in that case. This causes the for loop in
cfg80211_get_bss() to be bypassed, so the function returns NULL
(check line 1424 of net/wireless/scan.c), causing the WARN_ON()
in ieee80211_ibss_csa_beacon() to get triggered (check line 500
of net/mac80211/ibss.c), which was consequently reported on the
syzkaller dashboard.

Thus, check if we have an existing connection before generating
the CSA beacon in ieee80211_ibss_finish_csa().

Cc: stable@vger.kernel.org
Fixes: cd7760e62c2a ("mac80211: add support for CSA in IBSS mode")
Link: https://syzkaller.appspot.com/bug?id=05603ef4ae8926761b678d2939a3b2ad28ab9ca6
Reported-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Tested-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220814151512.9985-1-code@siddh.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/ibss.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -544,6 +544,10 @@ int ieee80211_ibss_finish_csa(struct iee
 
 	sdata_assert_lock(sdata);
 
+	/* When not connected/joined, sending CSA doesn't make sense. */
+	if (ifibss->state != IEEE80211_IBSS_MLME_JOINED)
+		return -ENOLINK;
+
 	/* update cfg80211 bss information with the new channel */
 	if (!is_zero_ether_addr(ifibss->bssid)) {
 		cbss = cfg80211_get_bss(sdata->local->hw.wiphy,

[PATCH 4.9 20/42] net: mac802154: Fix a condition in the receive path

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit f0da47118c7e93cdbbc6fb403dd729a5f2c90ee3 upstream.

Upon reception, a packet must be categorized, either it's destination is
the host, or it is another host. A packet with no destination addressing
fields may be valid in two situations:
- the packet has no source field: only ACKs are built like that, we
  consider the host as the destination.
- the packet has a valid source field: it is directed to the PAN
  coordinator, as for know we don't have this information we consider we
  are not the PAN coordinator.

There was likely a copy/paste error made during a previous cleanup
because the if clause is now containing exactly the same condition as in
the switch case, which can never be true. In the past the destination
address was used in the switch and the source address was used in the
if, which matches what the spec says.

Cc: stable@vger.kernel.org
Fixes: ae531b9475f6 ("ieee802154: use ieee802154_addr instead of *_sa variants")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220826142954.254853-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac802154/rx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/mac802154/rx.c
+++ b/net/mac802154/rx.c
@@ -52,7 +52,7 @@ ieee802154_subif_frame(struct ieee802154
 
 	switch (mac_cb(skb)->dest.mode) {
 	case IEEE802154_ADDR_NONE:
-		if (mac_cb(skb)->dest.mode != IEEE802154_ADDR_NONE)
+		if (hdr->source.mode != IEEE802154_ADDR_NONE)
 			/* FIXME: check if we are PAN coordinator */
 			skb->pkt_type = PACKET_OTHERHOST;
 		else

[PATCH 4.9 21/42] ALSA: seq: oss: Fix data-race for max_midi_devs access

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 22dec134dbfa825b963f8a1807ad19b943e46a56 upstream.

ALSA OSS sequencer refers to a global variable max_midi_devs at
creating a new port, storing it to its own field.  Meanwhile this
variable may be changed by other sequencer events at
snd_seq_oss_midi_check_exit_port() in parallel, which may cause a data
race.

OTOH, this data race itself is almost harmless, as the access to the
MIDI device is done via get_mdev() and it's protected with a refcount,
hence its presence is guaranteed.

Though, it's sill better to address the data-race from the code sanity
POV, and this patch adds the proper spinlock for the protection.

Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEHB2493pZRXs863w58QWnUTtv3HHfg85aYhLn5HJHCwxqtHQg@mail.gmail.com
Link: https://lore.kernel.org/r/20220823072717.1706-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/seq/oss/seq_oss_midi.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/core/seq/oss/seq_oss_midi.c
+++ b/sound/core/seq/oss/seq_oss_midi.c
@@ -280,7 +280,9 @@ snd_seq_oss_midi_clear_all(void)
 void
 snd_seq_oss_midi_setup(struct seq_oss_devinfo *dp)
 {
+	spin_lock_irq(&register_lock);
 	dp->max_mididev = max_midi_devs;
+	spin_unlock_irq(&register_lock);
 }
 
 /*

[PATCH 4.9 22/42] ALSA: seq: Fix data-race at module auto-loading

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 3e7e04b747adea36f349715d9f0998eeebf15d72 upstream.

It's been reported that there is a possible data-race accessing to the
global card_requested[] array at ALSA sequencer core, which is used
for determining whether to call request_module() for the card or not.
This data race itself is almost harmless, as it might end up with one
extra request_module() call for the already loaded module at most.
But it's still better to fix.

This patch addresses the possible data race of card_requested[] and
client_requested[] arrays by replacing them with bitmask.
It's an atomic operation and can work without locks.

Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEHB24_ay6YzARpA1zgCsE7=H9CSJJzux618E=Ka4h0YdKn=qA@mail.gmail.com
Link: https://lore.kernel.org/r/20220823072717.1706-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/seq/seq_clientmgr.c |   12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -136,13 +136,13 @@ struct snd_seq_client *snd_seq_client_us
 	spin_unlock_irqrestore(&clients_lock, flags);
 #ifdef CONFIG_MODULES
 	if (!in_interrupt()) {
-		static char client_requested[SNDRV_SEQ_GLOBAL_CLIENTS];
-		static char card_requested[SNDRV_CARDS];
+		static DECLARE_BITMAP(client_requested, SNDRV_SEQ_GLOBAL_CLIENTS);
+		static DECLARE_BITMAP(card_requested, SNDRV_CARDS);
+
 		if (clientid < SNDRV_SEQ_GLOBAL_CLIENTS) {
 			int idx;
 			
-			if (!client_requested[clientid]) {
-				client_requested[clientid] = 1;
+			if (!test_and_set_bit(clientid, client_requested)) {
 				for (idx = 0; idx < 15; idx++) {
 					if (seq_client_load[idx] < 0)
 						break;
@@ -157,10 +157,8 @@ struct snd_seq_client *snd_seq_client_us
 			int card = (clientid - SNDRV_SEQ_GLOBAL_CLIENTS) /
 				SNDRV_SEQ_CLIENTS_PER_CARD;
 			if (card < snd_ecards_limit) {
-				if (! card_requested[card]) {
-					card_requested[card] = 1;
+				if (!test_and_set_bit(card, card_requested))
 					snd_request_card(card);
-				}
 				snd_seq_device_load_drivers();
 			}
 		}

[PATCH 4.9 23/42] fs: only do a memory barrier for the first set_buffer_uptodate()

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 2f79cdfe58c13949bbbb65ba5926abfe9561d0ec upstream.

Commit d4252071b97d ("add barriers to buffer_uptodate and
set_buffer_uptodate") added proper memory barriers to the buffer head
BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date
will be guaranteed to actually see initialized state.

However, that commit didn't _just_ add the memory barrier, it also ended
up dropping the "was it already set" logic that the BUFFER_FNS() macro
had.

That's conceptually the right thing for a generic "this is a memory
barrier" operation, but in the case of the buffer contents, we really
only care about the memory barrier for the _first_ time we set the bit,
in that the only memory ordering protection we need is to avoid anybody
seeing uninitialized memory contents.

Any other access ordering wouldn't be about the BH_Uptodate bit anyway,
and would require some other proper lock (typically BH_Lock or the folio
lock).  A reader that races with somebody invalidating the buffer head
isn't an issue wrt the memory ordering, it's a serialization issue.

Now, you'd think that the buffer head operations don't matter in this
day and age (and I certainly thought so), but apparently some loads
still end up being heavy users of buffer heads.  In particular, the
kernel test robot reported that not having this bit access optimization
in place caused a noticeable direct IO performance regression on ext4:

  fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression

although you presumably need a fast disk and a lot of cores to actually
notice.

Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Fengwei Yin <fengwei.yin@intel.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/buffer_head.h |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -133,6 +133,17 @@ BUFFER_FNS(Defer_Completion, defer_compl
 static __always_inline void set_buffer_uptodate(struct buffer_head *bh)
 {
 	/*
+	 * If somebody else already set this uptodate, they will
+	 * have done the memory barrier, and a reader will thus
+	 * see *some* valid buffer state.
+	 *
+	 * Any other serialization (with IO errors or whatever that
+	 * might clear the bit) has to come from other state (eg BH_Lock).
+	 */
+	if (test_bit(BH_Uptodate, &bh->b_state))
+		return;
+
+	/*
 	 * make it consistent with folio_mark_uptodate
 	 * pairs with smp_load_acquire in buffer_uptodate
 	 */

[PATCH 4.9 24/42] Revert "mm: kmemleak: take a full lowmem check in kmemleak_*_phys()"

[Greg Kroah-Hartman]

From: Yee Lee <yee.lee@mediatek.com>

This reverts commit 23c2d497de21f25898fbea70aeb292ab8acc8c94.

Commit 23c2d497de21 ("mm: kmemleak: take a full lowmem check in
kmemleak_*_phys()") brought false leak alarms on some archs like arm64
that does not init pfn boundary in early booting. The final solution
lands on linux-6.0: commit 0c24e061196c ("mm: kmemleak: add rbtree and
store physical address for objects allocated with PA").

Revert this commit before linux-6.0. The original issue of invalid PA
can be mitigated by additional check in devicetree.

The false alarm report is as following: Kmemleak output: (Qemu/arm64)
unreferenced object 0xffff0000c0170a00 (size 128):
  comm "swapper/0", pid 1, jiffies 4294892404 (age 126.208s)
  hex dump (first 32 bytes):
 62 61 73 65 00 00 00 00 00 00 00 00 00 00 00 00  base............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<(____ptrval____)>] __kmalloc_track_caller+0x1b0/0x2e4
    [<(____ptrval____)>] kstrdup_const+0x8c/0xc4
    [<(____ptrval____)>] kvasprintf_const+0xbc/0xec
    [<(____ptrval____)>] kobject_set_name_vargs+0x58/0xe4
    [<(____ptrval____)>] kobject_add+0x84/0x100
    [<(____ptrval____)>] __of_attach_node_sysfs+0x78/0xec
    [<(____ptrval____)>] of_core_init+0x68/0x104
    [<(____ptrval____)>] driver_init+0x28/0x48
    [<(____ptrval____)>] do_basic_setup+0x14/0x28
    [<(____ptrval____)>] kernel_init_freeable+0x110/0x178
    [<(____ptrval____)>] kernel_init+0x20/0x1a0
    [<(____ptrval____)>] ret_from_fork+0x10/0x20

This pacth is also applicable to linux-5.17.y/linux-5.18.y/linux-5.19.y

Cc: <stable@vger.kernel.org>
Signed-off-by: Yee Lee <yee.lee@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/kmemleak.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1130,7 +1130,7 @@ EXPORT_SYMBOL(kmemleak_no_scan);
 void __ref kmemleak_alloc_phys(phys_addr_t phys, size_t size, int min_count,
 			       gfp_t gfp)
 {
-	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
+	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_alloc(__va(phys), size, min_count, gfp);
 }
 EXPORT_SYMBOL(kmemleak_alloc_phys);
@@ -1141,7 +1141,7 @@ EXPORT_SYMBOL(kmemleak_alloc_phys);
  */
 void __ref kmemleak_free_part_phys(phys_addr_t phys, size_t size)
 {
-	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
+	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_free_part(__va(phys), size);
 }
 EXPORT_SYMBOL(kmemleak_free_part_phys);
@@ -1152,7 +1152,7 @@ EXPORT_SYMBOL(kmemleak_free_part_phys);
  */
 void __ref kmemleak_not_leak_phys(phys_addr_t phys)
 {
-	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
+	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_not_leak(__va(phys));
 }
 EXPORT_SYMBOL(kmemleak_not_leak_phys);
@@ -1163,7 +1163,7 @@ EXPORT_SYMBOL(kmemleak_not_leak_phys);
  */
 void __ref kmemleak_ignore_phys(phys_addr_t phys)
 {
-	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
+	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_ignore(__va(phys));
 }
 EXPORT_SYMBOL(kmemleak_ignore_phys);

[PATCH 4.9 25/42] drm/radeon: add a force flush to delay work when radeon

[Greg Kroah-Hartman]

From: Zhenneng Li <lizhenneng@kylinos.cn>

[ Upstream commit f461950fdc374a3ada5a63c669d997de4600dffe ]

Although radeon card fence and wait for gpu to finish processing current batch rings,
there is still a corner case that radeon lockup work queue may not be fully flushed,
and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to
put device in D3hot state.
Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State.
> Configuration and Message requests are the only TLPs accepted by a Function in
> the D3hot state. All other received Requests must be handled as Unsupported Requests,
> and all received Completions may optionally be handled as Unexpected Completions.
This issue will happen in following logs:
Unable to handle kernel paging request at virtual address 00008800e0008010
CPU 0 kworker/0:3(131): Oops 0
pc = [<ffffffff811bea5c>]  ra = [<ffffffff81240844>]  ps = 0000 Tainted: G        W
pc is at si_gpu_check_soft_reset+0x3c/0x240
ra is at si_dma_is_lockup+0x34/0xd0
v0 = 0000000000000000  t0 = fff08800e0008010  t1 = 0000000000010000
t2 = 0000000000008010  t3 = fff00007e3c00000  t4 = fff00007e3c00258
t5 = 000000000000ffff  t6 = 0000000000000001  t7 = fff00007ef078000
s0 = fff00007e3c016e8  s1 = fff00007e3c00000  s2 = fff00007e3c00018
s3 = fff00007e3c00000  s4 = fff00007fff59d80  s5 = 0000000000000000
s6 = fff00007ef07bd98
a0 = fff00007e3c00000  a1 = fff00007e3c016e8  a2 = 0000000000000008
a3 = 0000000000000001  a4 = 8f5c28f5c28f5c29  a5 = ffffffff810f4338
t8 = 0000000000000275  t9 = ffffffff809b66f8  t10 = ff6769c5d964b800
t11= 000000000000b886  pv = ffffffff811bea20  at = 0000000000000000
gp = ffffffff81d89690  sp = 00000000aa814126
Disabling lock debugging due to kernel taint
Trace:
[<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0
[<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290
[<ffffffff80977010>] process_one_work+0x280/0x550
[<ffffffff80977350>] worker_thread+0x70/0x7c0
[<ffffffff80977410>] worker_thread+0x130/0x7c0
[<ffffffff80982040>] kthread+0x200/0x210
[<ffffffff809772e0>] worker_thread+0x0/0x7c0
[<ffffffff80981f8c>] kthread+0x14c/0x210
[<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20
[<ffffffff80981e40>] kthread+0x0/0x210
 Code: ad3e0008  43f0074a  ad7e0018  ad9e0020  8c3001e8  40230101
 <88210000> 4821ed21
So force lockup work queue flush to fix this problem.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_device.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 82b01123c3868..227c4733de2ea 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -1661,6 +1661,9 @@ int radeon_suspend_kms(struct drm_device *dev, bool suspend,
 		if (r) {
 			/* delay GPU reset to resume */
 			radeon_fence_driver_force_completion(rdev, i);
+		} else {
+			/* finish executing delayed work */
+			flush_delayed_work(&rdev->fence_drv[i].lockup_work);
 		}
 	}
 
-- 
2.35.1

[PATCH 4.9 26/42] parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()

[Greg Kroah-Hartman]

From: Li Qiong <liqiong@nfschina.com>

[ Upstream commit d46c742f827fa2326ab1f4faa1cccadb56912341 ]

As the possible failure of the kmalloc(), it should be better
to fix this error path, check and return '-ENOMEM' error code.

Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/parisc/ccio-dma.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index f6ef5952e94b3..633762f8d7755 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1408,15 +1408,17 @@ ccio_init_resource(struct resource *res, char *name, void __iomem *ioaddr)
 	}
 }
 
-static void __init ccio_init_resources(struct ioc *ioc)
+static int __init ccio_init_resources(struct ioc *ioc)
 {
 	struct resource *res = ioc->mmio_region;
 	char *name = kmalloc(14, GFP_KERNEL);
-
+	if (unlikely(!name))
+		return -ENOMEM;
 	snprintf(name, 14, "GSC Bus [%d/]", ioc->hw_path);
 
 	ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low);
 	ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv);
+	return 0;
 }
 
 static int new_ioc_area(struct resource *res, unsigned long size,
@@ -1566,7 +1568,10 @@ static int __init ccio_probe(struct parisc_device *dev)
 	ioc->hw_path = dev->hw_path;
 	ioc->ioc_regs = ioremap_nocache(dev->hpa.start, 4096);
 	ccio_ioc_init(ioc);
-	ccio_init_resources(ioc);
+	if (ccio_init_resources(ioc)) {
+		kfree(ioc);
+		return -ENOMEM;
+	}
 	hppa_dma_ops = &ccio_ops;
 	dev->dev.platform_data = kzalloc(sizeof(struct pci_hba_data), GFP_KERNEL);
 
-- 
2.35.1

[PATCH 4.9 27/42] parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 591d2108f3abc4db9f9073cae37cf3591fd250d6 ]

If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run
on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x
machine is detected.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/head.S | 43 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 9b99eb0712ad1..2f570a5205866 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -22,7 +22,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	.level	PA_ASM_LEVEL
+	.level	1.1
 
 	__INITDATA
 ENTRY(boot_args)
@@ -69,6 +69,47 @@ $bss_loop:
 	stw,ma          %arg2,4(%r1)
 	stw,ma          %arg3,4(%r1)
 
+#if !defined(CONFIG_64BIT) && defined(CONFIG_PA20)
+	/* This 32-bit kernel was compiled for PA2.0 CPUs. Check current CPU
+	 * and halt kernel if we detect a PA1.x CPU. */
+	ldi		32,%r10
+	mtctl		%r10,%cr11
+	.level 2.0
+	mfctl,w		%cr11,%r10
+	.level 1.1
+	comib,<>,n	0,%r10,$cpu_ok
+
+	load32		PA(msg1),%arg0
+	ldi		msg1_end-msg1,%arg1
+$iodc_panic:
+	copy		%arg0, %r10
+	copy		%arg1, %r11
+	load32		PA(init_stack),%sp
+#define MEM_CONS 0x3A0
+	ldw		MEM_CONS+32(%r0),%arg0	// HPA
+	ldi		ENTRY_IO_COUT,%arg1
+	ldw		MEM_CONS+36(%r0),%arg2	// SPA
+	ldw		MEM_CONS+8(%r0),%arg3	// layers
+	load32		PA(__bss_start),%r1
+	stw		%r1,-52(%sp)		// arg4
+	stw		%r0,-56(%sp)		// arg5
+	stw		%r10,-60(%sp)		// arg6 = ptr to text
+	stw		%r11,-64(%sp)		// arg7 = len
+	stw		%r0,-68(%sp)		// arg8
+	load32		PA(.iodc_panic_ret), %rp
+	ldw		MEM_CONS+40(%r0),%r1	// ENTRY_IODC
+	bv,n		(%r1)
+.iodc_panic_ret:
+	b .				/* wait endless with ... */
+	or		%r10,%r10,%r10	/* qemu idle sleep */
+msg1:	.ascii "Can't boot kernel which was built for PA8x00 CPUs on this machine.\r\n"
+msg1_end:
+
+$cpu_ok:
+#endif
+
+	.level	PA_ASM_LEVEL
+
 	/* Initialize startup VM. Just map first 16/32 MB of memory */
 	load32		PA(swapper_pg_dir),%r4
 	mtctl		%r4,%cr24	/* Initialize kernel root pointer */
-- 
2.35.1

[PATCH 4.9 28/42] fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 07c55c9803dea748d17a054000cbf1913ce06399 ]

Add missing pci_disable_device() in error path in chipsfb_pci_init().

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/chipsfb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c
index 84a3778552eba..ec1f8af165e9e 100644
--- a/drivers/video/fbdev/chipsfb.c
+++ b/drivers/video/fbdev/chipsfb.c
@@ -432,6 +432,7 @@ static int chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent)
  err_release_fb:
 	framebuffer_release(p);
  err_disable:
+	pci_disable_device(dp);
  err_out:
 	return rc;
 }
-- 
2.35.1

[PATCH 4.9 29/42] ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc()

[Greg Kroah-Hartman]

From: Tasos Sahanidis <tasos@tasossah.com>

commit d29f59051d3a07b81281b2df2b8c9dfe4716067f upstream.

The voice allocator sometimes begins allocating from near the end of the
array and then wraps around, however snd_emu10k1_pcm_channel_alloc()
accesses the newly allocated voices as if it never wrapped around.

This results in out of bounds access if the first voice has a high enough
index so that first_voice + requested_voice_count > NUM_G (64).
The more voices are requested, the more likely it is for this to occur.

This was initially discovered using PipeWire, however it can be reproduced
by calling aplay multiple times with 16 channels:
aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero

UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40
index 65 is out of range for type 'snd_emu10k1_voice [64]'
CPU: 1 PID: 31977 Comm: aplay Tainted: G        W IOE      6.0.0-rc2-emu10k1+ #7
Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002    07/22/2010
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x3f
__ubsan_handle_out_of_bounds.cold+0x44/0x49
snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1]
snd_pcm_hw_params+0x29f/0x600 [snd_pcm]
snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm]
? exit_to_user_mode_prepare+0x35/0x170
? do_syscall_64+0x69/0x90
? syscall_exit_to_user_mode+0x26/0x50
? do_syscall_64+0x69/0x90
? exit_to_user_mode_prepare+0x35/0x170
snd_pcm_ioctl+0x27/0x40 [snd_pcm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3707dcab-320a-62ff-63c0-73fc201ef756@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/emu10k1/emupcm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/emu10k1/emupcm.c
+++ b/sound/pci/emu10k1/emupcm.c
@@ -137,7 +137,7 @@ static int snd_emu10k1_pcm_channel_alloc
 	epcm->voices[0]->epcm = epcm;
 	if (voices > 1) {
 		for (i = 1; i < voices; i++) {
-			epcm->voices[i] = &epcm->emu->voices[epcm->voices[0]->number + i];
+			epcm->voices[i] = &epcm->emu->voices[(epcm->voices[0]->number + i) % NUM_G];
 			epcm->voices[i]->epcm = epcm;
 		}
 	}

[PATCH 4.9 30/42] ALSA: aloop: Fix random zeros in capture data when using jiffies timer

[Greg Kroah-Hartman]

From: Pattara Teerapong <pteerapong@chromium.org>

commit 3e48940abee88b8dbbeeaf8a07e7b2b6be1271b3 upstream.

In loopback_jiffies_timer_pos_update(), we are getting jiffies twice.
First time for playback, second time for capture. Jiffies can be updated
between these two calls and if the capture jiffies is larger, extra zeros
will be filled in the capture buffer.

Change to get jiffies once and use it for both playback and capture.

Signed-off-by: Pattara Teerapong <pteerapong@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220901144036.4049060-1-pteerapong@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/drivers/aloop.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -477,17 +477,18 @@ static unsigned int loopback_pos_update(
 			cable->streams[SNDRV_PCM_STREAM_PLAYBACK];
 	struct loopback_pcm *dpcm_capt =
 			cable->streams[SNDRV_PCM_STREAM_CAPTURE];
-	unsigned long delta_play = 0, delta_capt = 0;
+	unsigned long delta_play = 0, delta_capt = 0, cur_jiffies;
 	unsigned int running, count1, count2;
 
+	cur_jiffies = jiffies;
 	running = cable->running ^ cable->pause;
 	if (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) {
-		delta_play = jiffies - dpcm_play->last_jiffies;
+		delta_play = cur_jiffies - dpcm_play->last_jiffies;
 		dpcm_play->last_jiffies += delta_play;
 	}
 
 	if (running & (1 << SNDRV_PCM_STREAM_CAPTURE)) {
-		delta_capt = jiffies - dpcm_capt->last_jiffies;
+		delta_capt = cur_jiffies - dpcm_capt->last_jiffies;
 		dpcm_capt->last_jiffies += delta_capt;
 	}
 

[PATCH 4.9 31/42] ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()

[Greg Kroah-Hartman]

From: Dongxiang Ke <kdx.glider@gmail.com>

commit e53f47f6c1a56d2af728909f1cb894da6b43d9bf upstream.

There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and
the number of it's interfaces less than 4, an out-of-bounds read bug occurs
when parsing the interface descriptor for this device.

Fix this by checking the number of interfaces.

Signed-off-by: Dongxiang Ke <kdx.glider@gmail.com>
Link: https://lore.kernel.org/r/20220906024928.10951-1-kdx.glider@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/stream.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -502,7 +502,7 @@ int snd_usb_parse_audio_interface(struct
 	 * Dallas DS4201 workaround: It presents 5 altsettings, but the last
 	 * one misses syncpipe, and does not produce any sound.
 	 */
-	if (chip->usb_id == USB_ID(0x04fa, 0x4201))
+	if (chip->usb_id == USB_ID(0x04fa, 0x4201) && num >= 4)
 		num = 4;
 
 	for (i = 0; i < num; i++) {

[PATCH 4.9 32/42] scsi: mpt3sas: Fix use-after-free warning

[Greg Kroah-Hartman]

From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>

commit 991df3dd5144f2e6b1c38b8d20ed3d4d21e20b34 upstream.

Fix the following use-after-free warning which is observed during
controller reset:

refcount_t: underflow; use-after-free.
WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0

Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2776,6 +2776,7 @@ static struct fw_event_work *dequeue_nex
 		fw_event = list_first_entry(&ioc->fw_event_list,
 				struct fw_event_work, list);
 		list_del_init(&fw_event->list);
+		fw_event_work_put(fw_event);
 	}
 	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 
@@ -2812,7 +2813,6 @@ _scsih_fw_event_cleanup_queue(struct MPT
 		if (cancel_work_sync(&fw_event->work))
 			fw_event_work_put(fw_event);
 
-		fw_event_work_put(fw_event);
 	}
 }
 

[PATCH 4.9 33/42] driver core: Dont probe devices after bus_type.match() probe deferral

[Greg Kroah-Hartman]

From: Isaac J. Manjarres <isaacmanjarres@google.com>

commit 25e9fbf0fd38868a429feabc38abebfc6dbf6542 upstream.

Both __device_attach_driver() and __driver_attach() check the return
code of the bus_type.match() function to see if the device needs to be
added to the deferred probe list. After adding the device to the list,
the logic attempts to bind the device to the driver anyway, as if the
device had matched with the driver, which is not correct.

If __device_attach_driver() detects that the device in question is not
ready to match with a driver on the bus, then it doesn't make sense for
the device to attempt to bind with the current driver or continue
attempting to match with any of the other drivers on the bus. So, update
the logic in __device_attach_driver() to reflect this.

If __driver_attach() detects that a driver tried to match with a device
that is not ready to match yet, then the driver should not attempt to bind
with the device. However, the driver can still attempt to match and bind
with other devices on the bus, as drivers can be bound to multiple
devices. So, update the logic in __driver_attach() to reflect this.

Fixes: 656b8035b0ee ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()")
Cc: stable@vger.kernel.org
Cc: Saravana Kannan <saravanak@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20220817184026.3468620-1-isaacmanjarres@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/base/dd.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -590,6 +590,11 @@ static int __device_attach_driver(struct
 	} else if (ret == -EPROBE_DEFER) {
 		dev_dbg(dev, "Device match requests probe deferral\n");
 		driver_deferred_probe_add(dev);
+		/*
+		 * Device can't match with a driver right now, so don't attempt
+		 * to match or bind with other drivers on the bus.
+		 */
+		return ret;
 	} else if (ret < 0) {
 		dev_dbg(dev, "Bus failed to match device: %d", ret);
 		return ret;
@@ -732,6 +737,11 @@ static int __driver_attach(struct device
 	} else if (ret == -EPROBE_DEFER) {
 		dev_dbg(dev, "Device match requests probe deferral\n");
 		driver_deferred_probe_add(dev);
+		/*
+		 * Driver could not match with device, but may match with
+		 * another device on the bus.
+		 */
+		return 0;
 	} else if (ret < 0) {
 		dev_dbg(dev, "Bus failed to match device: %d", ret);
 		return ret;

[PATCH 4.9 34/42] netfilter: br_netfilter: Drop dst references before setting.

[Greg Kroah-Hartman]

From: Harsh Modi <harshmodi@google.com>

[ Upstream commit d047283a7034140ea5da759a494fd2274affdd46 ]

The IPv6 path already drops dst in the daddr changed case, but the IPv4
path does not. This change makes the two code paths consistent.

Further, it is possible that there is already a metadata_dst allocated from
ingress that might already be attached to skbuff->dst while following
the bridge path. If it is not released before setting a new
metadata_dst, it will be leaked. This is similar to what is done in
bpf_set_tunnel_key() or ip6_route_input().

It is important to note that the memory being leaked is not the dst
being set in the bridge code, but rather memory allocated from some
other code path that is not being freed correctly before the skb dst is
overwritten.

An example of the leakage fixed by this commit found using kmemleak:

unreferenced object 0xffff888010112b00 (size 256):
  comm "softirq", pid 0, jiffies 4294762496 (age 32.012s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 80 16 f1 83 ff ff ff ff  ................
    e1 4e f6 82 ff ff ff ff 00 00 00 00 00 00 00 00  .N..............
  backtrace:
    [<00000000d79567ea>] metadata_dst_alloc+0x1b/0xe0
    [<00000000be113e13>] udp_tun_rx_dst+0x174/0x1f0
    [<00000000a36848f4>] geneve_udp_encap_recv+0x350/0x7b0
    [<00000000d4afb476>] udp_queue_rcv_one_skb+0x380/0x560
    [<00000000ac064aea>] udp_unicast_rcv_skb+0x75/0x90
    [<000000009a8ee8c5>] ip_protocol_deliver_rcu+0xd8/0x230
    [<00000000ef4980bb>] ip_local_deliver_finish+0x7a/0xa0
    [<00000000d7533c8c>] __netif_receive_skb_one_core+0x89/0xa0
    [<00000000a879497d>] process_backlog+0x93/0x190
    [<00000000e41ade9f>] __napi_poll+0x28/0x170
    [<00000000b4c0906b>] net_rx_action+0x14f/0x2a0
    [<00000000b20dd5d4>] __do_softirq+0xf4/0x305
    [<000000003a7d7e15>] __irq_exit_rcu+0xc3/0x140
    [<00000000968d39a2>] sysvec_apic_timer_interrupt+0x9e/0xc0
    [<000000009e920794>] asm_sysvec_apic_timer_interrupt+0x16/0x20
    [<000000008942add0>] native_safe_halt+0x13/0x20

Florian Westphal says: "Original code was likely fine because nothing
ever did set a skb->dst entry earlier than bridge in those days."

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Harsh Modi <harshmodi@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_netfilter_hooks.c | 2 ++
 net/bridge/br_netfilter_ipv6.c  | 1 +
 2 files changed, 3 insertions(+)

diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index 11d4d18012fed..560a36c68be20 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -382,6 +382,7 @@ static int br_nf_pre_routing_finish(struct net *net, struct sock *sk, struct sk_
 				/* - Bridged-and-DNAT'ed traffic doesn't
 				 *   require ip_forwarding. */
 				if (rt->dst.dev == dev) {
+					skb_dst_drop(skb);
 					skb_dst_set(skb, &rt->dst);
 					goto bridged_dnat;
 				}
@@ -411,6 +412,7 @@ static int br_nf_pre_routing_finish(struct net *net, struct sock *sk, struct sk_
 			kfree_skb(skb);
 			return 0;
 		}
+		skb_dst_drop(skb);
 		skb_dst_set_noref(skb, &rt->dst);
 	}
 
diff --git a/net/bridge/br_netfilter_ipv6.c b/net/bridge/br_netfilter_ipv6.c
index 8c08dd07419f6..54dcead37dfd0 100644
--- a/net/bridge/br_netfilter_ipv6.c
+++ b/net/bridge/br_netfilter_ipv6.c
@@ -201,6 +201,7 @@ static int br_nf_pre_routing_finish_ipv6(struct net *net, struct sock *sk, struc
 			kfree_skb(skb);
 			return 0;
 		}
+		skb_dst_drop(skb);
 		skb_dst_set_noref(skb, &rt->dst);
 	}
 
-- 
2.35.1

[PATCH 4.9 35/42] netfilter: nf_conntrack_irc: Fix forged IP logic

[Greg Kroah-Hartman]

From: David Leadbeater <dgl@dgl.cx>

[ Upstream commit 0efe125cfb99e6773a7434f3463f7c2fa28f3a43 ]

Ensure the match happens in the right direction, previously the
destination used was the server, not the NAT host, as the comment
shows the code intended.

Additionally nf_nat_irc uses port 0 as a signal and there's no valid way
it can appear in a DCC message, so consider port 0 also forged.

Fixes: 869f37d8e48f ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port")
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_irc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nf_conntrack_irc.c b/net/netfilter/nf_conntrack_irc.c
index 1972a149f9583..c6a8bdc3a226d 100644
--- a/net/netfilter/nf_conntrack_irc.c
+++ b/net/netfilter/nf_conntrack_irc.c
@@ -187,8 +187,9 @@ static int help(struct sk_buff *skb, unsigned int protoff,
 
 			/* dcc_ip can be the internal OR external (NAT'ed) IP */
 			tuple = &ct->tuplehash[dir].tuple;
-			if (tuple->src.u3.ip != dcc_ip &&
-			    tuple->dst.u3.ip != dcc_ip) {
+			if ((tuple->src.u3.ip != dcc_ip &&
+			     ct->tuplehash[!dir].tuple.dst.u3.ip != dcc_ip) ||
+			    dcc_port == 0) {
 				net_warn_ratelimited("Forged DCC command from %pI4: %pI4:%u\n",
 						     &tuple->src.u3.ip,
 						     &dcc_ip, dcc_port);
-- 
2.35.1

[PATCH 4.9 36/42] sch_sfb: Dont assume the skb is still around after enqueueing to child

[Greg Kroah-Hartman]

From: Toke Høiland-Jørgensen <toke@toke.dk>

[ Upstream commit 9efd23297cca530bb35e1848665805d3fcdd7889 ]

The sch_sfb enqueue() routine assumes the skb is still alive after it has
been enqueued into a child qdisc, using the data in the skb cb field in the
increment_qlen() routine after enqueue. However, the skb may in fact have
been freed, causing a use-after-free in this case. In particular, this
happens if sch_cake is used as a child of sfb, and the GSO splitting mode
of CAKE is enabled (in which case the skb will be split into segments and
the original skb freed).

Fix this by copying the sfb cb data to the stack before enqueueing the skb,
and using this stack copy in increment_qlen() instead of the skb pointer
itself.

Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18231
Fixes: e13e02a3c68d ("net_sched: SFB flow scheduler")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_sfb.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/sched/sch_sfb.c b/net/sched/sch_sfb.c
index bc176bd48c026..592189427a09f 100644
--- a/net/sched/sch_sfb.c
+++ b/net/sched/sch_sfb.c
@@ -137,15 +137,15 @@ static void increment_one_qlen(u32 sfbhash, u32 slot, struct sfb_sched_data *q)
 	}
 }
 
-static void increment_qlen(const struct sk_buff *skb, struct sfb_sched_data *q)
+static void increment_qlen(const struct sfb_skb_cb *cb, struct sfb_sched_data *q)
 {
 	u32 sfbhash;
 
-	sfbhash = sfb_hash(skb, 0);
+	sfbhash = cb->hashes[0];
 	if (sfbhash)
 		increment_one_qlen(sfbhash, 0, q);
 
-	sfbhash = sfb_hash(skb, 1);
+	sfbhash = cb->hashes[1];
 	if (sfbhash)
 		increment_one_qlen(sfbhash, 1, q);
 }
@@ -283,6 +283,7 @@ static int sfb_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	struct sfb_sched_data *q = qdisc_priv(sch);
 	struct Qdisc *child = q->qdisc;
 	struct tcf_proto *fl;
+	struct sfb_skb_cb cb;
 	int i;
 	u32 p_min = ~0;
 	u32 minqlen = ~0;
@@ -399,11 +400,12 @@ static int sfb_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	}
 
 enqueue:
+	memcpy(&cb, sfb_skb_cb(skb), sizeof(cb));
 	ret = qdisc_enqueue(skb, child, to_free);
 	if (likely(ret == NET_XMIT_SUCCESS)) {
 		qdisc_qstats_backlog_inc(sch, skb);
 		sch->q.qlen++;
-		increment_qlen(skb, q);
+		increment_qlen(&cb, q);
 	} else if (net_xmit_drop_count(ret)) {
 		q->stats.childdrop++;
 		qdisc_qstats_drop(sch);
-- 
2.35.1

[PATCH 4.9 37/42] tipc: fix shift wrapping bug in map_get()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit e2b224abd9bf45dcb55750479fc35970725a430b ]

There is a shift wrapping bug in this code so anything thing above
31 will return false.

Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/monitor.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/tipc/monitor.c b/net/tipc/monitor.c
index e1f4538b16532..7efcbd11a907a 100644
--- a/net/tipc/monitor.c
+++ b/net/tipc/monitor.c
@@ -130,7 +130,7 @@ static void map_set(u64 *up_map, int i, unsigned int v)
 
 static int map_get(u64 up_map, int i)
 {
-	return (up_map & (1 << i)) >> i;
+	return (up_map & (1ULL << i)) >> i;
 }
 
 static struct tipc_peer *peer_prev(struct tipc_peer *peer)
-- 
2.35.1

[PATCH 4.9 38/42] tcp: fix early ETIMEDOUT after spurious non-SACK RTO

[Greg Kroah-Hartman]

From: Neal Cardwell <ncardwell@google.com>

[ Upstream commit 686dc2db2a0fdc1d34b424ec2c0a735becd8d62b ]

Fix a bug reported and analyzed by Nagaraj Arankal, where the handling
of a spurious non-SACK RTO could cause a connection to fail to clear
retrans_stamp, causing a later RTO to very prematurely time out the
connection with ETIMEDOUT.

Here is the buggy scenario, expanding upon Nagaraj Arankal's excellent
report:

(*1) Send one data packet on a non-SACK connection

(*2) Because no ACK packet is received, the packet is retransmitted
     and we enter CA_Loss; but this retransmission is spurious.

(*3) The ACK for the original data is received. The transmitted packet
     is acknowledged.  The TCP timestamp is before the retrans_stamp,
     so tcp_may_undo() returns true, and tcp_try_undo_loss() returns
     true without changing state to Open (because tcp_is_sack() is
     false), and tcp_process_loss() returns without calling
     tcp_try_undo_recovery().  Normally after undoing a CA_Loss
     episode, tcp_fastretrans_alert() would see that the connection
     has returned to CA_Open and fall through and call
     tcp_try_to_open(), which would set retrans_stamp to 0.  However,
     for non-SACK connections we hold the connection in CA_Loss, so do
     not fall through to call tcp_try_to_open() and do not set
     retrans_stamp to 0. So retrans_stamp is (erroneously) still
     non-zero.

     At this point the first "retransmission event" has passed and
     been recovered from. Any future retransmission is a completely
     new "event". However, retrans_stamp is erroneously still
     set. (And we are still in CA_Loss, which is correct.)

(*4) After 16 minutes (to correspond with tcp_retries2=15), a new data
     packet is sent. Note: No data is transmitted between (*3) and
     (*4) and we disabled keep alives.

     The socket's timeout SHOULD be calculated from this point in
     time, but instead it's calculated from the prior "event" 16
     minutes ago (step (*2)).

(*5) Because no ACK packet is received, the packet is retransmitted.

(*6) At the time of the 2nd retransmission, the socket returns
     ETIMEDOUT, prematurely, because retrans_stamp is (erroneously)
     too far in the past (set at the time of (*2)).

This commit fixes this bug by ensuring that we reuse in
tcp_try_undo_loss() the same careful logic for non-SACK connections
that we have in tcp_try_undo_recovery(). To avoid duplicating logic,
we factor out that logic into a new
tcp_is_non_sack_preventing_reopen() helper and call that helper from
both undo functions.

Fixes: da34ac7626b5 ("tcp: only undo on partial ACKs in CA_Loss")
Reported-by: Nagaraj Arankal <nagaraj.p.arankal@hpe.com>
Link: https://lore.kernel.org/all/SJ0PR84MB1847BE6C24D274C46A1B9B0EB27A9@SJ0PR84MB1847.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220903121023.866900-1-ncardwell.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_input.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index b12a329ef1873..2029e7a36cbb4 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2468,6 +2468,21 @@ static inline bool tcp_may_undo(const struct tcp_sock *tp)
 	return tp->undo_marker && (!tp->undo_retrans || tcp_packet_delayed(tp));
 }
 
+static bool tcp_is_non_sack_preventing_reopen(struct sock *sk)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+
+	if (tp->snd_una == tp->high_seq && tcp_is_reno(tp)) {
+		/* Hold old state until something *above* high_seq
+		 * is ACKed. For Reno it is MUST to prevent false
+		 * fast retransmits (RFC2582). SACK TCP is safe. */
+		if (!tcp_any_retrans_done(sk))
+			tp->retrans_stamp = 0;
+		return true;
+	}
+	return false;
+}
+
 /* People celebrate: "We love our President!" */
 static bool tcp_try_undo_recovery(struct sock *sk)
 {
@@ -2488,14 +2503,8 @@ static bool tcp_try_undo_recovery(struct sock *sk)
 
 		NET_INC_STATS(sock_net(sk), mib_idx);
 	}
-	if (tp->snd_una == tp->high_seq && tcp_is_reno(tp)) {
-		/* Hold old state until something *above* high_seq
-		 * is ACKed. For Reno it is MUST to prevent false
-		 * fast retransmits (RFC2582). SACK TCP is safe. */
-		if (!tcp_any_retrans_done(sk))
-			tp->retrans_stamp = 0;
+	if (tcp_is_non_sack_preventing_reopen(sk))
 		return true;
-	}
 	tcp_set_ca_state(sk, TCP_CA_Open);
 	tp->is_sack_reneg = 0;
 	return false;
@@ -2529,6 +2538,8 @@ static bool tcp_try_undo_loss(struct sock *sk, bool frto_undo)
 			NET_INC_STATS(sock_net(sk),
 					LINUX_MIB_TCPSPURIOUSRTOS);
 		inet_csk(sk)->icsk_retransmits = 0;
+		if (tcp_is_non_sack_preventing_reopen(sk))
+			return true;
 		if (frto_undo || tcp_is_sack(tp)) {
 			tcp_set_ca_state(sk, TCP_CA_Open);
 			tp->is_sack_reneg = 0;
-- 
2.35.1

[PATCH 4.9 39/42] sch_sfb: Also store skb len before calling child enqueue

[Greg Kroah-Hartman]

From: Toke Høiland-Jørgensen <toke@toke.dk>

[ Upstream commit 2f09707d0c972120bf794cfe0f0c67e2c2ddb252 ]

Cong Wang noticed that the previous fix for sch_sfb accessing the queued
skb after enqueueing it to a child qdisc was incomplete: the SFB enqueue
function was also calling qdisc_qstats_backlog_inc() after enqueue, which
reads the pkt len from the skb cb field. Fix this by also storing the skb
len, and using the stored value to increment the backlog after enqueueing.

Fixes: 9efd23297cca ("sch_sfb: Don't assume the skb is still around after enqueueing to child")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220905192137.965549-1-toke@toke.dk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_sfb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/sched/sch_sfb.c b/net/sched/sch_sfb.c
index 592189427a09f..2973d82fb21cc 100644
--- a/net/sched/sch_sfb.c
+++ b/net/sched/sch_sfb.c
@@ -281,6 +281,7 @@ static int sfb_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 {
 
 	struct sfb_sched_data *q = qdisc_priv(sch);
+	unsigned int len = qdisc_pkt_len(skb);
 	struct Qdisc *child = q->qdisc;
 	struct tcf_proto *fl;
 	struct sfb_skb_cb cb;
@@ -403,7 +404,7 @@ static int sfb_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	memcpy(&cb, sfb_skb_cb(skb), sizeof(cb));
 	ret = qdisc_enqueue(skb, child, to_free);
 	if (likely(ret == NET_XMIT_SUCCESS)) {
-		qdisc_qstats_backlog_inc(sch, skb);
+		sch->qstats.backlog += len;
 		sch->q.qlen++;
 		increment_qlen(&cb, q);
 	} else if (net_xmit_drop_count(ret)) {
-- 
2.35.1

[PATCH 4.9 40/42] usb: dwc3: fix PHY disable sequence

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@kernel.org>

commit d2ac7bef95c9ead307801ccb6cb6dfbeb14247bf upstream.

Generic PHYs must be powered-off before they can be tore down.

Similarly, suspending legacy PHYs after having powered them off makes no
sense.

Fix the dwc3_core_exit() (e.g. called during suspend) and open-coded
dwc3_probe() error-path sequences that got this wrong.

Note that this makes dwc3_core_exit() match the dwc3_core_init() error
path with respect to powering off the PHYs.

Fixes: 03c1fd622f72 ("usb: dwc3: core: add phy cleanup for probe error handling")
Fixes: c499ff71ff2a ("usb: dwc3: core: re-factor init and exit paths")
Cc: stable@vger.kernel.org      # 4.8
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220804151001.23612-2-johan+linaro@kernel.org
[ johan: adjust context to 4.9 ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -602,15 +602,15 @@ static void dwc3_core_exit(struct dwc3 *
 {
 	dwc3_event_buffers_cleanup(dwc);
 
-	usb_phy_shutdown(dwc->usb2_phy);
-	usb_phy_shutdown(dwc->usb3_phy);
-	phy_exit(dwc->usb2_generic_phy);
-	phy_exit(dwc->usb3_generic_phy);
-
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
 	phy_power_off(dwc->usb2_generic_phy);
 	phy_power_off(dwc->usb3_generic_phy);
+
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
 }
 
 /**
@@ -1149,16 +1149,16 @@ static int dwc3_probe(struct platform_de
 err5:
 	dwc3_event_buffers_cleanup(dwc);
 
-	usb_phy_shutdown(dwc->usb2_phy);
-	usb_phy_shutdown(dwc->usb3_phy);
-	phy_exit(dwc->usb2_generic_phy);
-	phy_exit(dwc->usb3_generic_phy);
-
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
 	phy_power_off(dwc->usb2_generic_phy);
 	phy_power_off(dwc->usb3_generic_phy);
 
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
+
 	dwc3_ulpi_exit(dwc);
 
 err4:

[PATCH 4.9 41/42] MIPS: loongson32: ls1c: Fix hang during startup

[Greg Kroah-Hartman]

From: Yang Ling <gnaygnil@gmail.com>

[ Upstream commit 35508d2424097f9b6a1a17aac94f702767035616 ]

The RTCCTRL reg of LS1C is obselete.
Writing this reg will cause system hang.

Fixes: 60219c563c9b6 ("MIPS: Add RTC support for Loongson1C board")
Signed-off-by: Yang Ling <gnaygnil@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Acked-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/loongson32/ls1c/board.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
index a96bed5e3ea60..ac1c5e6572d5f 100644
--- a/arch/mips/loongson32/ls1c/board.c
+++ b/arch/mips/loongson32/ls1c/board.c
@@ -18,7 +18,6 @@ static struct platform_device *ls1c_platform_devices[] __initdata = {
 static int __init ls1c_platform_init(void)
 {
 	ls1x_serial_set_uartclk(&ls1x_uart_pdev);
-	ls1x_rtc_set_extclk(&ls1x_rtc_pdev);
 
 	return platform_add_devices(ls1c_platform_devices,
 				   ARRAY_SIZE(ls1c_platform_devices));
-- 
2.35.1

[PATCH 4.9 42/42] SUNRPC: use _bh spinlocking on ->transport_lock

[Greg Kroah-Hartman]

From: "NeilBrown" <neilb@suse.de>

Prior to Linux 5.3, ->transport_lock in sunrpc required the _bh style
spinlocks (when not called from a bottom-half handler).

When upstream 3848e96edf4788f772d83990022fa7023a233d83 was backported to
stable kernels, the spin_lock/unlock calls should have been changed to
the _bh version, but this wasn't noted in the patch and didn't happen.

So convert these lock/unlock calls to the _bh versions.

This patch is required for any stable kernel prior to 5.3 to which the
above mentioned patch was backported.  Namely 4.9.y, 4.14.y, 4.19.y.

Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
---
 net/sunrpc/xprt.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -1451,9 +1451,9 @@ static void xprt_destroy(struct rpc_xprt
 	 * is cleared.  We use ->transport_lock to ensure the mod_timer()
 	 * can only run *before* del_time_sync(), never after.
 	 */
-	spin_lock(&xprt->transport_lock);
+	spin_lock_bh(&xprt->transport_lock);
 	del_timer_sync(&xprt->timer);
-	spin_unlock(&xprt->transport_lock);
+	spin_unlock_bh(&xprt->transport_lock);
 
 	rpc_xprt_debugfs_unregister(xprt);
 	rpc_destroy_wait_queue(&xprt->binding);

Re: [PATCH 4.9 00/42] 4.9.328-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 659 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.9.328 release.
> There are 42 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.9.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.9 00/42] 4.9.328-rc1 review

[Naresh Kamboju]

On Tue, 13 Sept 2022 at 20:07, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.328 release.
> There are 42 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 15 Sep 2022 14:03:27 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.328-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.9.328-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.9.y
* git commit: 1573700dfd1f3ba21b839c8189562e7670ecadf4
* git describe: v4.9.327-43-g1573700dfd1f
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.327-43-g1573700dfd1f

## No test Regressions (compared to v4.9.327)

## No metric Regressions (compared to v4.9.327)

## No test Fixes (compared to v4.9.327)

## No metric Fixes (compared to v4.9.327)

## Test result summary
total: 51324, pass: 44556, fail: 464, skip: 5952, xfail: 352

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 282 total, 277 passed, 5 failed
* arm64: 53 total, 46 passed, 7 failed
* i386: 29 total, 28 passed, 1 failed
* mips: 41 total, 40 passed, 1 failed
* parisc: 12 total, 0 passed, 12 failed
* powerpc: 45 total, 19 passed, 26 failed
* s390: 15 total, 11 passed, 4 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 48 total, 47 passed, 1 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.9 00/42] 4.9.328-rc1 review

[Jon Hunter]

On Tue, 13 Sep 2022 16:07:31 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.328 release.
> There are 42 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 15 Sep 2022 14:03:27 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.328-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version:	4.9.328-rc1-g3ed886339090
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.9 00/42] 4.9.328-rc1 review

[Florian Fainelli]

On 9/13/22 07:07, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.328 release.
> There are 42 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 15 Sep 2022 14:03:27 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.328-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 4.9 00/42] 4.9.328-rc1 review

[Guenter Roeck]

On Tue, Sep 13, 2022 at 04:07:31PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.328 release.
> There are 42 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 15 Sep 2022 14:03:27 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 164 pass: 164 fail: 0
Qemu test results:
	total: 395 pass: 395 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter