[PATCH v3 0/2] Add DISPCC driver for SM6115

[PATCH v3 0/2] Add DISPCC driver for SM6115

[Adam Skladowski]

This patch series introduce support for SM6115 display clock controller,
this driver is based on QCM2290 one.

Changes since v1
================
1. Changed bindings file names to Vendor,SoC-IP format.
2. Changed include in dispcc-sm6115 to reflect name change of bindings.

Changes since v2
================
1. Changed maintainer email.
2. Converted driver to use .index instead of fw_name.
3. Removed parents which had no passed clock.
4. Updated YAML to reflect changes above.
5. Adjusted driver based on Bjorn's feedback.

Adam Skladowski (2):
  dt-bindings: clock: add QCOM SM6115 display clock bindings
  clk: qcom: Add display clock controller driver for SM6115

 .../bindings/clock/qcom,sm6115-dispcc.yaml    |  70 ++
 drivers/clk/qcom/Kconfig                      |   9 +
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/dispcc-sm6115.c              | 608 ++++++++++++++++++
 .../dt-bindings/clock/qcom,sm6115-dispcc.h    |  36 ++
 5 files changed, 724 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
 create mode 100644 drivers/clk/qcom/dispcc-sm6115.c
 create mode 100644 include/dt-bindings/clock/qcom,sm6115-dispcc.h

-- 
2.25.1

[PATCH v3 1/2] dt-bindings: clock: add QCOM SM6115 display clock bindings

[Adam Skladowski]

Add device tree bindings for display clock controller for
Qualcomm Technology Inc's SM6115 SoC.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 .../bindings/clock/qcom,sm6115-dispcc.yaml    | 70 +++++++++++++++++++
 .../dt-bindings/clock/qcom,sm6115-dispcc.h    | 36 ++++++++++
 2 files changed, 106 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
 create mode 100644 include/dt-bindings/clock/qcom,sm6115-dispcc.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
new file mode 100644
index 000000000000..a6bf363b5015
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller Binding for SM6115
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks and
+  power domains on SM6115.
+
+  See also:
+    dt-bindings/clock/qcom,sm6115-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: GPLL0 DISP DIV clock from GCC
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6115-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/include/dt-bindings/clock/qcom,sm6115-dispcc.h b/include/dt-bindings/clock/qcom,sm6115-dispcc.h
new file mode 100644
index 000000000000..d1a6c45b5029
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,sm6115-dispcc.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6115_H
+#define _DT_BINDINGS_CLK_QCOM_DISP_CC_SM6115_H
+
+/* DISP_CC clocks */
+#define DISP_CC_PLL0			0
+#define DISP_CC_PLL0_OUT_MAIN		1
+#define DISP_CC_MDSS_AHB_CLK		2
+#define DISP_CC_MDSS_AHB_CLK_SRC	3
+#define DISP_CC_MDSS_BYTE0_CLK		4
+#define DISP_CC_MDSS_BYTE0_CLK_SRC	5
+#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC	6
+#define DISP_CC_MDSS_BYTE0_INTF_CLK	7
+#define DISP_CC_MDSS_ESC0_CLK		8
+#define DISP_CC_MDSS_ESC0_CLK_SRC	9
+#define DISP_CC_MDSS_MDP_CLK		10
+#define DISP_CC_MDSS_MDP_CLK_SRC	11
+#define DISP_CC_MDSS_MDP_LUT_CLK	12
+#define DISP_CC_MDSS_NON_GDSC_AHB_CLK	13
+#define DISP_CC_MDSS_PCLK0_CLK		14
+#define DISP_CC_MDSS_PCLK0_CLK_SRC	15
+#define DISP_CC_MDSS_ROT_CLK		16
+#define DISP_CC_MDSS_ROT_CLK_SRC	17
+#define DISP_CC_MDSS_VSYNC_CLK		18
+#define DISP_CC_MDSS_VSYNC_CLK_SRC	19
+#define DISP_CC_SLEEP_CLK		20
+#define DISP_CC_SLEEP_CLK_SRC		21
+
+/* DISP_CC GDSCR */
+#define MDSS_GDSC			0
+
+#endif
-- 
2.25.1

[PATCH v3 2/2] clk: qcom: Add display clock controller driver for SM6115

[Adam Skladowski]

Add support for the display clock controller found in SM6115/SM4250
based devices. This clock controller feeds the Multimedia Display
SubSystem (MDSS).
This driver is based upon one submitted for QCM2290.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
---
 drivers/clk/qcom/Kconfig         |   9 +
 drivers/clk/qcom/Makefile        |   1 +
 drivers/clk/qcom/dispcc-sm6115.c | 608 +++++++++++++++++++++++++++++++
 3 files changed, 618 insertions(+)
 create mode 100644 drivers/clk/qcom/dispcc-sm6115.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 1cf1ef70e347..852888a849ae 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -616,6 +616,15 @@ config SM_CAMCC_8450
 	  Support for the camera clock controller on SM8450 devices.
 	  Say Y if you want to support camera devices and camera functionality.
 
+config SM_DISPCC_6115
+	tristate "SM6115 Display Clock Controller"
+	depends on SM_GCC_6115
+	help
+	  Support for the display clock controller on Qualcomm Technologies, Inc
+	  SM6115/SM4250 devices.
+	  Say Y if you want to support display devices and functionality such as
+	  splash screen
+
 config SM_DISPCC_6125
 	tristate "SM6125 Display Clock Controller"
 	depends on SM_GCC_6125
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index fbcf04073f07..a732ccb3b912 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_SDX_GCC_55) += gcc-sdx55.o
 obj-$(CONFIG_SDX_GCC_65) += gcc-sdx65.o
 obj-$(CONFIG_SM_CAMCC_8250) += camcc-sm8250.o
 obj-$(CONFIG_SM_CAMCC_8450) += camcc-sm8450.o
+obj-$(CONFIG_SM_DISPCC_6115) += dispcc-sm6115.o
 obj-$(CONFIG_SM_DISPCC_6125) += dispcc-sm6125.o
 obj-$(CONFIG_SM_DISPCC_6350) += dispcc-sm6350.o
 obj-$(CONFIG_SM_DISPCC_8250) += dispcc-sm8250.o
diff --git a/drivers/clk/qcom/dispcc-sm6115.c b/drivers/clk/qcom/dispcc-sm6115.c
new file mode 100644
index 000000000000..818bb8f4637c
--- /dev/null
+++ b/drivers/clk/qcom/dispcc-sm6115.c
@@ -0,0 +1,608 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on dispcc-qcm2290.c
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Linaro Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "common.h"
+#include "gdsc.h"
+
+enum {
+	DT_BI_TCXO,
+	DT_SLEEP_CLK,
+	DT_DSI0_PHY_PLL_OUT_BYTECLK,
+	DT_DSI0_PHY_PLL_OUT_DSICLK,
+	DT_GPLL0_DISP_DIV,
+};
+
+enum {
+	P_BI_TCXO,
+	P_DISP_CC_PLL0_OUT_MAIN,
+	P_DSI0_PHY_PLL_OUT_BYTECLK,
+	P_DSI0_PHY_PLL_OUT_DSICLK,
+	P_GPLL0_OUT_MAIN,
+	P_SLEEP_CLK,
+};
+
+static const struct clk_parent_data parent_data_tcxo = { .index = DT_BI_TCXO };
+
+static const struct pll_vco spark_vco[] = {
+	{ 500000000, 1000000000, 2 },
+};
+
+/* 768MHz configuration */
+static const struct alpha_pll_config disp_cc_pll0_config = {
+	.l = 0x28,
+	.alpha = 0x0,
+	.alpha_en_mask = BIT(24),
+	.vco_val = 0x2 << 20,
+	.vco_mask = GENMASK(21, 20),
+	.main_output_mask = BIT(0),
+	.config_ctl_val = 0x4001055B,
+};
+
+static struct clk_alpha_pll disp_cc_pll0 = {
+	.offset = 0x0,
+	.vco_table = spark_vco,
+	.num_vco = ARRAY_SIZE(spark_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_pll0",
+			.parent_data = &parent_data_tcxo,
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_ops,
+		},
+	},
+};
+
+static const struct clk_div_table post_div_table_disp_cc_pll0_out_main[] = {
+	{ 0x0, 1 },
+	{ }
+};
+static struct clk_alpha_pll_postdiv disp_cc_pll0_out_main = {
+	.offset = 0x0,
+	.post_div_shift = 8,
+	.post_div_table = post_div_table_disp_cc_pll0_out_main,
+	.num_post_div = ARRAY_SIZE(post_div_table_disp_cc_pll0_out_main),
+	.width = 4,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_pll0_out_main",
+		.parent_hws = (const struct clk_hw*[]){
+			&disp_cc_pll0.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_alpha_pll_postdiv_ops,
+	},
+};
+
+static const struct parent_map disp_cc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_DSI0_PHY_PLL_OUT_BYTECLK, 1 },
+};
+
+static const struct clk_parent_data disp_cc_parent_data_0[] = {
+	{ .index = DT_BI_TCXO },
+	{ .index = DT_DSI0_PHY_PLL_OUT_BYTECLK },
+};
+
+static const struct parent_map disp_cc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+};
+
+static const struct clk_parent_data disp_cc_parent_data_1[] = {
+	{ .index = DT_BI_TCXO },
+};
+
+static const struct parent_map disp_cc_parent_map_2[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 4 },
+};
+
+static const struct clk_parent_data disp_cc_parent_data_2[] = {
+	{ .index = DT_BI_TCXO },
+	{ .index = DT_GPLL0_DISP_DIV },
+};
+
+static const struct parent_map disp_cc_parent_map_3[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_DISP_CC_PLL0_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data disp_cc_parent_data_3[] = {
+	{ .index = DT_BI_TCXO },
+	{ .hw = &disp_cc_pll0_out_main.clkr.hw },
+};
+
+static const struct parent_map disp_cc_parent_map_4[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_DSI0_PHY_PLL_OUT_DSICLK, 1 },
+};
+
+static const struct clk_parent_data disp_cc_parent_data_4[] = {
+	{ .index = DT_BI_TCXO },
+	{ .index = DT_DSI0_PHY_PLL_OUT_DSICLK },
+};
+
+static const struct parent_map disp_cc_parent_map_5[] = {
+	{ P_SLEEP_CLK, 0 },
+};
+
+static const struct clk_parent_data disp_cc_parent_data_5[] = {
+	{ .index = DT_SLEEP_CLK, },
+};
+
+static struct clk_rcg2 disp_cc_mdss_byte0_clk_src = {
+	.cmd_rcgr = 0x20bc,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_0,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_byte0_clk_src",
+		.parent_data = disp_cc_parent_data_0,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_0),
+		/* For set_rate and set_parent to succeed, parent(s) must be enabled */
+		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE | CLK_GET_RATE_NOCACHE,
+		.ops = &clk_byte2_ops,
+	},
+};
+
+static struct clk_regmap_div disp_cc_mdss_byte0_div_clk_src = {
+	.reg = 0x20d4,
+	.shift = 0,
+	.width = 2,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "disp_cc_mdss_byte0_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]){
+			&disp_cc_mdss_byte0_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.ops = &clk_regmap_div_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_mdss_ahb_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(37500000, P_GPLL0_OUT_MAIN, 8, 0, 0),
+	F(75000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_mdss_ahb_clk_src = {
+	.cmd_rcgr = 0x2154,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_2,
+	.freq_tbl = ftbl_disp_cc_mdss_ahb_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_ahb_clk_src",
+		.parent_data = disp_cc_parent_data_2,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_2),
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_mdss_esc0_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_mdss_esc0_clk_src = {
+	.cmd_rcgr = 0x20d8,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_0,
+	.freq_tbl = ftbl_disp_cc_mdss_esc0_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_esc0_clk_src",
+		.parent_data = disp_cc_parent_data_0,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_0),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_mdss_mdp_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(192000000, P_DISP_CC_PLL0_OUT_MAIN, 4, 0, 0),
+	F(256000000, P_DISP_CC_PLL0_OUT_MAIN, 3, 0, 0),
+	F(307200000, P_DISP_CC_PLL0_OUT_MAIN, 2.5, 0, 0),
+	F(384000000, P_DISP_CC_PLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_mdss_mdp_clk_src = {
+	.cmd_rcgr = 0x2074,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_3,
+	.freq_tbl = ftbl_disp_cc_mdss_mdp_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_mdp_clk_src",
+		.parent_data = disp_cc_parent_data_3,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static struct clk_rcg2 disp_cc_mdss_pclk0_clk_src = {
+	.cmd_rcgr = 0x205c,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_4,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_pclk0_clk_src",
+		.parent_data = disp_cc_parent_data_4,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_4),
+		/* For set_rate and set_parent to succeed, parent(s) must be enabled */
+		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE | CLK_GET_RATE_NOCACHE,
+		.ops = &clk_pixel_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_mdss_rot_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(192000000, P_DISP_CC_PLL0_OUT_MAIN, 4, 0, 0),
+	F(256000000, P_DISP_CC_PLL0_OUT_MAIN, 3, 0, 0),
+	F(307200000, P_DISP_CC_PLL0_OUT_MAIN, 2.5, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_mdss_rot_clk_src = {
+	.cmd_rcgr = 0x208c,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_3,
+	.freq_tbl = ftbl_disp_cc_mdss_rot_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_rot_clk_src",
+		.parent_data = disp_cc_parent_data_3,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_3),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static struct clk_rcg2 disp_cc_mdss_vsync_clk_src = {
+	.cmd_rcgr = 0x20a4,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_1,
+	.freq_tbl = ftbl_disp_cc_mdss_esc0_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_mdss_vsync_clk_src",
+		.parent_data = disp_cc_parent_data_1,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_1),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_disp_cc_sleep_clk_src[] = {
+	F(32764, P_SLEEP_CLK, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 disp_cc_sleep_clk_src = {
+	.cmd_rcgr = 0x6050,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = disp_cc_parent_map_5,
+	.freq_tbl = ftbl_disp_cc_sleep_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "disp_cc_sleep_clk_src",
+		.parent_data = disp_cc_parent_data_5,
+		.num_parents = ARRAY_SIZE(disp_cc_parent_data_5),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_branch disp_cc_mdss_ahb_clk = {
+	.halt_reg = 0x2044,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2044,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_ahb_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_ahb_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_byte0_clk = {
+	.halt_reg = 0x2024,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2024,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_byte0_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_byte0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_byte0_intf_clk = {
+	.halt_reg = 0x2028,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2028,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_byte0_intf_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_byte0_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_esc0_clk = {
+	.halt_reg = 0x202c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x202c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_esc0_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_esc0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_mdp_clk = {
+	.halt_reg = 0x2008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_mdp_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_mdp_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_mdp_lut_clk = {
+	.halt_reg = 0x2018,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x2018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_mdp_lut_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_mdp_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_non_gdsc_ahb_clk = {
+	.halt_reg = 0x4004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x4004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_non_gdsc_ahb_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_ahb_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_pclk0_clk = {
+	.halt_reg = 0x2004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_pclk0_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_pclk0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_rot_clk = {
+	.halt_reg = 0x2010,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_rot_clk",
+			.parent_names = (const char *[]){
+				"disp_cc_mdss_rot_clk_src",
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_mdss_vsync_clk = {
+	.halt_reg = 0x2020,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x2020,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_mdss_vsync_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_mdss_vsync_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch disp_cc_sleep_clk = {
+	.halt_reg = 0x6068,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x6068,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "disp_cc_sleep_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&disp_cc_sleep_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc mdss_gdsc = {
+	.gdscr = 0x3000,
+	.pd = {
+		.name = "mdss_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = HW_CTRL,
+};
+
+static struct gdsc *disp_cc_sm6115_gdscs[] = {
+	[MDSS_GDSC] = &mdss_gdsc,
+};
+
+static struct clk_regmap *disp_cc_sm6115_clocks[] = {
+	[DISP_CC_PLL0] = &disp_cc_pll0.clkr,
+	[DISP_CC_PLL0_OUT_MAIN] = &disp_cc_pll0_out_main.clkr,
+	[DISP_CC_MDSS_AHB_CLK] = &disp_cc_mdss_ahb_clk.clkr,
+	[DISP_CC_MDSS_AHB_CLK_SRC] = &disp_cc_mdss_ahb_clk_src.clkr,
+	[DISP_CC_MDSS_BYTE0_CLK] = &disp_cc_mdss_byte0_clk.clkr,
+	[DISP_CC_MDSS_BYTE0_CLK_SRC] = &disp_cc_mdss_byte0_clk_src.clkr,
+	[DISP_CC_MDSS_BYTE0_DIV_CLK_SRC] = &disp_cc_mdss_byte0_div_clk_src.clkr,
+	[DISP_CC_MDSS_BYTE0_INTF_CLK] = &disp_cc_mdss_byte0_intf_clk.clkr,
+	[DISP_CC_MDSS_ESC0_CLK] = &disp_cc_mdss_esc0_clk.clkr,
+	[DISP_CC_MDSS_ESC0_CLK_SRC] = &disp_cc_mdss_esc0_clk_src.clkr,
+	[DISP_CC_MDSS_MDP_CLK] = &disp_cc_mdss_mdp_clk.clkr,
+	[DISP_CC_MDSS_MDP_CLK_SRC] = &disp_cc_mdss_mdp_clk_src.clkr,
+	[DISP_CC_MDSS_MDP_LUT_CLK] = &disp_cc_mdss_mdp_lut_clk.clkr,
+	[DISP_CC_MDSS_NON_GDSC_AHB_CLK] = &disp_cc_mdss_non_gdsc_ahb_clk.clkr,
+	[DISP_CC_MDSS_PCLK0_CLK] = &disp_cc_mdss_pclk0_clk.clkr,
+	[DISP_CC_MDSS_PCLK0_CLK_SRC] = &disp_cc_mdss_pclk0_clk_src.clkr,
+	[DISP_CC_MDSS_ROT_CLK] = &disp_cc_mdss_rot_clk.clkr,
+	[DISP_CC_MDSS_ROT_CLK_SRC] = &disp_cc_mdss_rot_clk_src.clkr,
+	[DISP_CC_MDSS_VSYNC_CLK] = &disp_cc_mdss_vsync_clk.clkr,
+	[DISP_CC_MDSS_VSYNC_CLK_SRC] = &disp_cc_mdss_vsync_clk_src.clkr,
+	[DISP_CC_SLEEP_CLK] = &disp_cc_sleep_clk.clkr,
+	[DISP_CC_SLEEP_CLK_SRC] = &disp_cc_sleep_clk_src.clkr,
+};
+
+static const struct regmap_config disp_cc_sm6115_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x10000,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc disp_cc_sm6115_desc = {
+	.config = &disp_cc_sm6115_regmap_config,
+	.clks = disp_cc_sm6115_clocks,
+	.num_clks = ARRAY_SIZE(disp_cc_sm6115_clocks),
+	.gdscs = disp_cc_sm6115_gdscs,
+	.num_gdscs = ARRAY_SIZE(disp_cc_sm6115_gdscs),
+};
+
+static const struct of_device_id disp_cc_sm6115_match_table[] = {
+	{ .compatible = "qcom,sm6115-dispcc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, disp_cc_sm6115_match_table);
+
+static int disp_cc_sm6115_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	int ret;
+
+	regmap = qcom_cc_map(pdev, &disp_cc_sm6115_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	clk_alpha_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
+
+	/* Keep DISP_CC_XO_CLK always-ON */
+	regmap_update_bits(regmap, 0x604c, BIT(0), BIT(0));
+
+	ret = qcom_cc_really_probe(pdev, &disp_cc_sm6115_desc, regmap);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register DISP CC clocks\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static struct platform_driver disp_cc_sm6115_driver = {
+	.probe = disp_cc_sm6115_probe,
+	.driver = {
+		.name = "dispcc-sm6115",
+		.of_match_table = disp_cc_sm6115_match_table,
+	},
+};
+
+module_platform_driver(disp_cc_sm6115_driver);
+MODULE_DESCRIPTION("Qualcomm SM6115 Display Clock controller");
+MODULE_LICENSE("GPL");
-- 
2.25.1

Re: [PATCH v3 1/2] dt-bindings: clock: add QCOM SM6115 display clock bindings

[Rob Herring]

On Sun, Sep 11, 2022 at 06:46:18PM +0200, Adam Skladowski wrote:
> Add device tree bindings for display clock controller for
> Qualcomm Technology Inc's SM6115 SoC.
> 
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> ---
>  .../bindings/clock/qcom,sm6115-dispcc.yaml    | 70 +++++++++++++++++++
>  .../dt-bindings/clock/qcom,sm6115-dispcc.h    | 36 ++++++++++
>  2 files changed, 106 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
>  create mode 100644 include/dt-bindings/clock/qcom,sm6115-dispcc.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
> new file mode 100644
> index 000000000000..a6bf363b5015
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/qcom,sm6115-dispcc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Display Clock Controller Binding for SM6115

s/Binding //

> +
> +maintainers:
> +  - Bjorn Andersson <andersson@kernel.org>
> +
> +description: |

Don't need '|' when no formatting to preserve.

With those fixes,

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 1/2] dt-bindings: clock: add QCOM SM6115 display clock bindings

[Bjorn Andersson]

On Tue, Sep 13, 2022 at 10:26:20AM -0500, Rob Herring wrote:
> On Sun, Sep 11, 2022 at 06:46:18PM +0200, Adam Skladowski wrote:
> > Add device tree bindings for display clock controller for
> > Qualcomm Technology Inc's SM6115 SoC.
> > 
> > Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> > ---
> >  .../bindings/clock/qcom,sm6115-dispcc.yaml    | 70 +++++++++++++++++++
> >  .../dt-bindings/clock/qcom,sm6115-dispcc.h    | 36 ++++++++++
> >  2 files changed, 106 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
> >  create mode 100644 include/dt-bindings/clock/qcom,sm6115-dispcc.h
> > 
> > diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
> > new file mode 100644
> > index 000000000000..a6bf363b5015
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
> > @@ -0,0 +1,70 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/qcom,sm6115-dispcc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Display Clock Controller Binding for SM6115
> 
> s/Binding //
> 
> > +
> > +maintainers:
> > +  - Bjorn Andersson <andersson@kernel.org>
> > +
> > +description: |
> 
> Don't need '|' when no formatting to preserve.
> 

This follows the other dispcc bindings, where I think the intention is
to keep the formatting over "See also". In contrast to the other dispcc
bindings the "See also" has a ':' at the end in this proposal...

> With those fixes,
> 
> Reviewed-by: Rob Herring <robh@kernel.org>

I took the liberty of fixing up the description to align with the others
and applied this, with your R-b.

Regards,
Bjorn

Re: [PATCH v3 0/2] Add DISPCC driver for SM6115

[Bjorn Andersson]

On Sun, 11 Sep 2022 18:46:17 +0200, Adam Skladowski wrote:
> This patch series introduce support for SM6115 display clock controller,
> this driver is based on QCM2290 one.
> 
> Changes since v1
> ================
> 1. Changed bindings file names to Vendor,SoC-IP format.
> 2. Changed include in dispcc-sm6115 to reflect name change of bindings.
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: clock: add QCOM SM6115 display clock bindings
      commit: 38557c6fc0771be5791e16837342db581daa6379
[2/2] clk: qcom: Add display clock controller driver for SM6115
      commit: 9b518788631cf7bc2b10d3967fd2343d1c88d65c

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>