From: Li Yang <leoyang.li@nxp.com> To: shawnguo@kernel.org, devicetree@vger.kernel.org Cc: robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>, Ioana Radulescu <ruxandra.radulescu@nxp.com> Subject: [PATCH v4 1/5] arm64: dts: ls208xa-qds: add mdio mux nodes from on-board FPGA Date: Wed, 14 Sep 2022 16:15:34 -0500 [thread overview] Message-ID: <20220914211538.29473-2-leoyang.li@nxp.com> (raw) In-Reply-To: <20220914211538.29473-1-leoyang.li@nxp.com> Update the cpld node name to be generic board-contrl and add mmio mdio mux nodes from the on-board FPGA. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> --- .../boot/dts/freescale/fsl-ls208xa-qds.dtsi | 65 ++++++++++++++++++- 1 file changed, 62 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index 6fab73d484b6..f598669e742f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -9,6 +9,27 @@ * */ +/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */ +&dpmac9 { + phy-handle = <&mdio0_phy12>; + phy-connection-type = "sgmii"; +}; + +&dpmac10 { + phy-handle = <&mdio0_phy13>; + phy-connection-type = "sgmii"; +}; + +&dpmac11 { + phy-handle = <&mdio0_phy14>; + phy-connection-type = "sgmii"; +}; + +&dpmac12 { + phy-handle = <&mdio0_phy15>; + phy-connection-type = "sgmii"; +}; + &esdhc { mmc-hs200-1_8v; status = "okay"; @@ -36,9 +57,47 @@ nand@2,0 { reg = <0x2 0x0 0x10000>; }; - cpld@3,0 { - reg = <0x3 0x0 0x10000>; - compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; + boardctrl: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ls208xaqds-fpga", "fsl,fpga-qixis", "simple-mfd"; + reg = <3 0 0x1000>; + ranges = <0 3 0 0x1000>; + + mdio-mux-emi1@54 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&emdio1>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1_MDIO */ + #address-cells=<1>; + #size-cells = <0>; + + /* Child MDIO buses, one for each riser card: + * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0. + * VSC8234 PHYs on the riser cards. + */ + mdio_mux3: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + mdio0_phy12: mdio-phy0@1c { + reg = <0x1c>; + }; + + mdio0_phy13: mdio-phy1@1d { + reg = <0x1d>; + }; + + mdio0_phy14: mdio-phy2@1e { + reg = <0x1e>; + }; + + mdio0_phy15: mdio-phy3@1f { + reg = <0x1f>; + }; + }; + }; }; }; -- 2.37.1
WARNING: multiple messages have this Message-ID (diff)
From: Li Yang <leoyang.li@nxp.com> To: shawnguo@kernel.org, devicetree@vger.kernel.org Cc: robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>, Ioana Radulescu <ruxandra.radulescu@nxp.com> Subject: [PATCH v4 1/5] arm64: dts: ls208xa-qds: add mdio mux nodes from on-board FPGA Date: Wed, 14 Sep 2022 16:15:34 -0500 [thread overview] Message-ID: <20220914211538.29473-2-leoyang.li@nxp.com> (raw) In-Reply-To: <20220914211538.29473-1-leoyang.li@nxp.com> Update the cpld node name to be generic board-contrl and add mmio mdio mux nodes from the on-board FPGA. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> --- .../boot/dts/freescale/fsl-ls208xa-qds.dtsi | 65 ++++++++++++++++++- 1 file changed, 62 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index 6fab73d484b6..f598669e742f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -9,6 +9,27 @@ * */ +/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */ +&dpmac9 { + phy-handle = <&mdio0_phy12>; + phy-connection-type = "sgmii"; +}; + +&dpmac10 { + phy-handle = <&mdio0_phy13>; + phy-connection-type = "sgmii"; +}; + +&dpmac11 { + phy-handle = <&mdio0_phy14>; + phy-connection-type = "sgmii"; +}; + +&dpmac12 { + phy-handle = <&mdio0_phy15>; + phy-connection-type = "sgmii"; +}; + &esdhc { mmc-hs200-1_8v; status = "okay"; @@ -36,9 +57,47 @@ nand@2,0 { reg = <0x2 0x0 0x10000>; }; - cpld@3,0 { - reg = <0x3 0x0 0x10000>; - compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; + boardctrl: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ls208xaqds-fpga", "fsl,fpga-qixis", "simple-mfd"; + reg = <3 0 0x1000>; + ranges = <0 3 0 0x1000>; + + mdio-mux-emi1@54 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&emdio1>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1_MDIO */ + #address-cells=<1>; + #size-cells = <0>; + + /* Child MDIO buses, one for each riser card: + * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0. + * VSC8234 PHYs on the riser cards. + */ + mdio_mux3: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + mdio0_phy12: mdio-phy0@1c { + reg = <0x1c>; + }; + + mdio0_phy13: mdio-phy1@1d { + reg = <0x1d>; + }; + + mdio0_phy14: mdio-phy2@1e { + reg = <0x1e>; + }; + + mdio0_phy15: mdio-phy3@1f { + reg = <0x1f>; + }; + }; + }; }; }; -- 2.37.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-14 21:15 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-14 21:15 [PATCH v4 0/5] ls208xa dts updates Li Yang 2022-09-14 21:15 ` Li Yang 2022-09-14 21:15 ` Li Yang [this message] 2022-09-14 21:15 ` [PATCH v4 1/5] arm64: dts: ls208xa-qds: add mdio mux nodes from on-board FPGA Li Yang 2022-09-14 21:15 ` [PATCH v4 2/5] arm64: dts: ls2080a-rdb: add phy nodes Li Yang 2022-09-14 21:15 ` Li Yang 2022-09-14 21:15 ` [PATCH v4 3/5] arm64: dts: ls2081a-rdb: Add DTS for NXP LS2081ARDB Li Yang 2022-09-14 21:15 ` Li Yang 2022-09-14 21:15 ` [PATCH v4 4/5] arm64: dts: ls208xa-rdb: fix errata E-00013 Li Yang 2022-09-14 21:15 ` Li Yang 2022-09-14 21:15 ` [PATCH v4 5/5] arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A Li Yang 2022-09-14 21:15 ` Li Yang 2022-09-16 12:10 ` [PATCH v4 0/5] ls208xa dts updates Shawn Guo 2022-09-16 12:10 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220914211538.29473-2-leoyang.li@nxp.com \ --to=leoyang.li@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=ruxandra.radulescu@nxp.com \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.