* [PATCH v2 00/11] accumulated dts updates for ls1043a
@ 2022-09-14 21:46 ` Li Yang
0 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree; +Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang
v2 updates:
- Use MACROs for interrupts and gpio property
Hou Zhiqiang (2):
arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
arm64: dts: ls1043a: Add big-endian property for PCIe nodes
Laurentiu Tudor (2):
arm64: dts: ls1043a: add missing dma ranges property
arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma
size
Li Yang (7):
arm64: dts: ls1043a: fix the wrong size of dcfg space
arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
arm64: dts: ls1043a: use pcie aer/pme interrupts
arm64: dts: ls1043a: make dma-coherent global to the SoC
arm64: dts: ls1043a: add gpio based i2c recovery information
arm64: dts: ls1043a-qds: add mmio based mdio-mux support
arm64: dts: ls1043a-rdb: add pcf85263 rtc node
.../boot/dts/freescale/fsl-ls1043a-qds.dts | 173 +++++++++++++++++-
.../boot/dts/freescale/fsl-ls1043a-rdb.dts | 10 +
.../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 132 +++++++------
3 files changed, 257 insertions(+), 58 deletions(-)
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 26+ messages in thread* [PATCH v2 01/11] arm64: dts: ls1043a: fix the wrong size of dcfg space
2022-09-14 21:46 ` Li Yang
@ 2022-09-14 21:46 ` Li Yang
-1 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree; +Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang
The size of the block should be 0x1000 instead of 0x10000.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index ca3d5a90d6d4..e6fce671799d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -393,7 +393,7 @@ sfp: efuse@1e80000 {
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1043a-dcfg", "syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
--
2.37.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v2 01/11] arm64: dts: ls1043a: fix the wrong size of dcfg space
@ 2022-09-14 21:46 ` Li Yang
0 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree; +Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang
The size of the block should be 0x1000 instead of 0x10000.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index ca3d5a90d6d4..e6fce671799d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -393,7 +393,7 @@ sfp: efuse@1e80000 {
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1043a-dcfg", "syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v2 02/11] arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
2022-09-14 21:46 ` Li Yang
@ 2022-09-14 21:46 ` Li Yang
-1 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang, Ran Wang
Enable USB3 HW LPM feature for ls1043a.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index e6fce671799d..3ba66b18de35 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -817,6 +817,7 @@ usb0: usb@2f00000 {
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
status = "disabled";
};
@@ -828,6 +829,7 @@ usb1: usb@3000000 {
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
status = "disabled";
};
@@ -839,6 +841,7 @@ usb2: usb@3100000 {
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
status = "disabled";
};
--
2.37.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v2 02/11] arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
@ 2022-09-14 21:46 ` Li Yang
0 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang, Ran Wang
Enable USB3 HW LPM feature for ls1043a.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index e6fce671799d..3ba66b18de35 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -817,6 +817,7 @@ usb0: usb@2f00000 {
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
status = "disabled";
};
@@ -828,6 +829,7 @@ usb1: usb@3000000 {
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
status = "disabled";
};
@@ -839,6 +841,7 @@ usb2: usb@3100000 {
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
status = "disabled";
};
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v2 03/11] arm64: dts: ls1043a: use pcie aer/pme interrupts
2022-09-14 21:46 ` Li Yang
@ 2022-09-14 21:46 ` Li Yang
-1 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang, Po Liu, Hou Zhiqiang
After the binding has been updated to include more specific interrupt
definition, update the dts to use the more specific interrupt names.
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3ba66b18de35..d04d4ac66d2a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -883,9 +883,9 @@ pcie1: pcie@3400000 {
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 118 0x4>, /* controller interrupt */
- <0 117 0x4>; /* PME interrupt */
- interrupt-names = "intr", "pme";
+ interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>,
+ <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -909,9 +909,9 @@ pcie2: pcie@3500000 {
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
<0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 128 0x4>,
- <0 127 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -935,9 +935,9 @@ pcie3: pcie@3600000 {
reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
<0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 162 0x4>,
- <0 161 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
--
2.37.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v2 03/11] arm64: dts: ls1043a: use pcie aer/pme interrupts
@ 2022-09-14 21:46 ` Li Yang
0 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang, Po Liu, Hou Zhiqiang
After the binding has been updated to include more specific interrupt
definition, update the dts to use the more specific interrupt names.
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3ba66b18de35..d04d4ac66d2a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -883,9 +883,9 @@ pcie1: pcie@3400000 {
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 118 0x4>, /* controller interrupt */
- <0 117 0x4>; /* PME interrupt */
- interrupt-names = "intr", "pme";
+ interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>,
+ <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -909,9 +909,9 @@ pcie2: pcie@3500000 {
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
<0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 128 0x4>,
- <0 127 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -935,9 +935,9 @@ pcie3: pcie@3600000 {
reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
<0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 162 0x4>,
- <0 161 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v2 04/11] arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
2022-09-14 21:46 ` Li Yang
@ 2022-09-14 21:46 ` Li Yang
-1 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Hou Zhiqiang, Li Yang
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
The LS1043A PCIe controller has some control registers
in SCFG block, so add the SCFG phandle for each PCIe
controller node.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index d04d4ac66d2a..e1c5d685a9e3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -901,6 +901,7 @@ pcie1: pcie@3400000 {
<0000 0 0 2 &gic 0 111 0x4>,
<0000 0 0 3 &gic 0 112 0x4>,
<0000 0 0 4 &gic 0 113 0x4>;
+ fsl,pcie-scfg = <&scfg 0>;
status = "disabled";
};
@@ -927,6 +928,7 @@ pcie2: pcie@3500000 {
<0000 0 0 2 &gic 0 121 0x4>,
<0000 0 0 3 &gic 0 122 0x4>,
<0000 0 0 4 &gic 0 123 0x4>;
+ fsl,pcie-scfg = <&scfg 1>;
status = "disabled";
};
@@ -953,6 +955,7 @@ pcie3: pcie@3600000 {
<0000 0 0 2 &gic 0 155 0x4>,
<0000 0 0 3 &gic 0 156 0x4>,
<0000 0 0 4 &gic 0 157 0x4>;
+ fsl,pcie-scfg = <&scfg 2>;
status = "disabled";
};
--
2.37.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v2 04/11] arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
@ 2022-09-14 21:46 ` Li Yang
0 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Hou Zhiqiang, Li Yang
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
The LS1043A PCIe controller has some control registers
in SCFG block, so add the SCFG phandle for each PCIe
controller node.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index d04d4ac66d2a..e1c5d685a9e3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -901,6 +901,7 @@ pcie1: pcie@3400000 {
<0000 0 0 2 &gic 0 111 0x4>,
<0000 0 0 3 &gic 0 112 0x4>,
<0000 0 0 4 &gic 0 113 0x4>;
+ fsl,pcie-scfg = <&scfg 0>;
status = "disabled";
};
@@ -927,6 +928,7 @@ pcie2: pcie@3500000 {
<0000 0 0 2 &gic 0 121 0x4>,
<0000 0 0 3 &gic 0 122 0x4>,
<0000 0 0 4 &gic 0 123 0x4>;
+ fsl,pcie-scfg = <&scfg 1>;
status = "disabled";
};
@@ -953,6 +955,7 @@ pcie3: pcie@3600000 {
<0000 0 0 2 &gic 0 155 0x4>,
<0000 0 0 3 &gic 0 156 0x4>,
<0000 0 0 4 &gic 0 157 0x4>;
+ fsl,pcie-scfg = <&scfg 2>;
status = "disabled";
};
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v2 05/11] arm64: dts: ls1043a: Add big-endian property for PCIe nodes
2022-09-14 21:46 ` Li Yang
@ 2022-09-14 21:46 ` Li Yang
-1 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Hou Zhiqiang, Li Yang
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Add the big-endian property for LS1043A PCIe nodes for accessing PEX_LUT
and PF register block.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index e1c5d685a9e3..3cf6722e7555 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -902,6 +902,7 @@ pcie1: pcie@3400000 {
<0000 0 0 3 &gic 0 112 0x4>,
<0000 0 0 4 &gic 0 113 0x4>;
fsl,pcie-scfg = <&scfg 0>;
+ big-endian;
status = "disabled";
};
@@ -929,6 +930,7 @@ pcie2: pcie@3500000 {
<0000 0 0 3 &gic 0 122 0x4>,
<0000 0 0 4 &gic 0 123 0x4>;
fsl,pcie-scfg = <&scfg 1>;
+ big-endian;
status = "disabled";
};
@@ -956,6 +958,7 @@ pcie3: pcie@3600000 {
<0000 0 0 3 &gic 0 156 0x4>,
<0000 0 0 4 &gic 0 157 0x4>;
fsl,pcie-scfg = <&scfg 2>;
+ big-endian;
status = "disabled";
};
--
2.37.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v2 05/11] arm64: dts: ls1043a: Add big-endian property for PCIe nodes
@ 2022-09-14 21:46 ` Li Yang
0 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Hou Zhiqiang, Li Yang
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Add the big-endian property for LS1043A PCIe nodes for accessing PEX_LUT
and PF register block.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index e1c5d685a9e3..3cf6722e7555 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -902,6 +902,7 @@ pcie1: pcie@3400000 {
<0000 0 0 3 &gic 0 112 0x4>,
<0000 0 0 4 &gic 0 113 0x4>;
fsl,pcie-scfg = <&scfg 0>;
+ big-endian;
status = "disabled";
};
@@ -929,6 +930,7 @@ pcie2: pcie@3500000 {
<0000 0 0 3 &gic 0 122 0x4>,
<0000 0 0 4 &gic 0 123 0x4>;
fsl,pcie-scfg = <&scfg 1>;
+ big-endian;
status = "disabled";
};
@@ -956,6 +958,7 @@ pcie3: pcie@3600000 {
<0000 0 0 3 &gic 0 156 0x4>,
<0000 0 0 4 &gic 0 157 0x4>;
fsl,pcie-scfg = <&scfg 2>;
+ big-endian;
status = "disabled";
};
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v2 06/11] arm64: dts: ls1043a: add missing dma ranges property
2022-09-14 21:46 ` Li Yang
@ 2022-09-14 21:46 ` Li Yang
-1 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Laurentiu Tudor, Li Yang
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
ls1043a has a 48-bit address size so make sure that the dma-ranges
reflects this. Otherwise the linux kernel's dma sub-system will set the
default dma masks to full 64-bit, badly breaking dmas.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3cf6722e7555..0da8d814297c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -300,6 +300,7 @@ soc: soc {
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
clockgen: clocking@1ee1000 {
compatible = "fsl,ls1043a-clockgen";
--
2.37.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v2 06/11] arm64: dts: ls1043a: add missing dma ranges property
@ 2022-09-14 21:46 ` Li Yang
0 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Laurentiu Tudor, Li Yang
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
ls1043a has a 48-bit address size so make sure that the dma-ranges
reflects this. Otherwise the linux kernel's dma sub-system will set the
default dma masks to full 64-bit, badly breaking dmas.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3cf6722e7555..0da8d814297c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -300,6 +300,7 @@ soc: soc {
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
clockgen: clocking@1ee1000 {
compatible = "fsl,ls1043a-clockgen";
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v2 07/11] arm64: dts: ls1043a: make dma-coherent global to the SoC
2022-09-14 21:46 ` Li Yang
@ 2022-09-14 21:46 ` Li Yang
-1 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang, Laurentiu Tudor
ls1043a is really completely dma coherent in their entirety so add the
dma-coherent property at the soc level in the device tree and drop the
instances where it's specifically added to a few select devices.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 0da8d814297c..5749de512201 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -301,6 +301,7 @@ soc: soc {
#size-cells = <2>;
ranges;
dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+ dma-coherent;
clockgen: clocking@1ee1000 {
compatible = "fsl,ls1043a-clockgen";
@@ -890,7 +891,6 @@ pcie1: pcie@3400000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -918,7 +918,6 @@ pcie2: pcie@3500000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -946,7 +945,6 @@ pcie3: pcie@3600000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
--
2.37.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v2 07/11] arm64: dts: ls1043a: make dma-coherent global to the SoC
@ 2022-09-14 21:46 ` Li Yang
0 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:46 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang, Laurentiu Tudor
ls1043a is really completely dma coherent in their entirety so add the
dma-coherent property at the soc level in the device tree and drop the
instances where it's specifically added to a few select devices.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 0da8d814297c..5749de512201 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -301,6 +301,7 @@ soc: soc {
#size-cells = <2>;
ranges;
dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+ dma-coherent;
clockgen: clocking@1ee1000 {
compatible = "fsl,ls1043a-clockgen";
@@ -890,7 +891,6 @@ pcie1: pcie@3400000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -918,7 +918,6 @@ pcie2: pcie@3500000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -946,7 +945,6 @@ pcie3: pcie@3600000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v2 08/11] arm64: dts: ls1043a: add gpio based i2c recovery information
2022-09-14 21:46 ` Li Yang
@ 2022-09-14 21:47 ` Li Yang
-1 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:47 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang, Zhang Ying
Add scl-gpios property for i2c recovery and add SoC specific compatible
string for SoC specific fixup.
Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 5749de512201..58c55335f09c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "fsl,ls1043a";
@@ -538,7 +539,7 @@ dspi1: spi@2110000 {
};
i2c0: i2c@2180000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
@@ -553,7 +554,7 @@ i2c0: i2c@2180000 {
};
i2c1: i2c@2190000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
@@ -561,11 +562,12 @@ i2c1: i2c@2190000 {
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
+ scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
i2c2: i2c@21a0000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x21a0000 0x0 0x10000>;
@@ -573,11 +575,12 @@ i2c2: i2c@21a0000 {
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
+ scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
i2c3: i2c@21b0000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x21b0000 0x0 0x10000>;
@@ -585,6 +588,7 @@ i2c3: i2c@21b0000 {
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
+ scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
--
2.37.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v2 08/11] arm64: dts: ls1043a: add gpio based i2c recovery information
@ 2022-09-14 21:47 ` Li Yang
0 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:47 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang, Zhang Ying
Add scl-gpios property for i2c recovery and add SoC specific compatible
string for SoC specific fixup.
Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 5749de512201..58c55335f09c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "fsl,ls1043a";
@@ -538,7 +539,7 @@ dspi1: spi@2110000 {
};
i2c0: i2c@2180000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
@@ -553,7 +554,7 @@ i2c0: i2c@2180000 {
};
i2c1: i2c@2190000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
@@ -561,11 +562,12 @@ i2c1: i2c@2190000 {
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
+ scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
i2c2: i2c@21a0000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x21a0000 0x0 0x10000>;
@@ -573,11 +575,12 @@ i2c2: i2c@21a0000 {
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
+ scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
i2c3: i2c@21b0000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x21b0000 0x0 0x10000>;
@@ -585,6 +588,7 @@ i2c3: i2c@21b0000 {
clock-names = "i2c";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
+ scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v2 09/11] arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma size
2022-09-14 21:46 ` Li Yang
@ 2022-09-14 21:47 ` Li Yang
-1 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:47 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Laurentiu Tudor,
Robin Murphy, Li Yang
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Wrap the usb and sata controllers in an intermediate simple-bus and use
it to constrain the dma address size of these usb controllers to the 40
bits that they generate toward the interconnect. This is required
because the SoC uses 48 bits address sizes and this mismatch would lead
to smmu context faults because the usb generates 40-bit addresses while
the smmu page tables are populated with 48-bit wide addresses.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 92 ++++++++++---------
1 file changed, 50 insertions(+), 42 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 58c55335f09c..704f72caddd3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -816,51 +816,59 @@ QORIQ_CLK_PLL_DIV(1)>,
QORIQ_CLK_PLL_DIV(1)>;
};
- usb0: usb@2f00000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x2f00000 0x0 0x10000>;
- interrupts = <0 60 0x4>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- usb3-lpm-capable;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- status = "disabled";
- };
+ aux_bus: aux_bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+ usb0: usb@2f00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ status = "disabled";
+ };
- usb1: usb@3000000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x3000000 0x0 0x10000>;
- interrupts = <0 61 0x4>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- usb3-lpm-capable;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- status = "disabled";
- };
+ usb1: usb@3000000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3000000 0x0 0x10000>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ status = "disabled";
+ };
- usb2: usb@3100000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x3100000 0x0 0x10000>;
- interrupts = <0 63 0x4>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- usb3-lpm-capable;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- status = "disabled";
- };
+ usb2: usb@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ status = "disabled";
+ };
- sata: sata@3200000 {
- compatible = "fsl,ls1043a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>,
- <0x0 0x20140520 0x0 0x4>;
- reg-names = "ahci", "sata-ecc";
- interrupts = <0 69 0x4>;
- clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
- QORIQ_CLK_PLL_DIV(1)>;
- dma-coherent;
+ sata: sata@3200000 {
+ compatible = "fsl,ls1043a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x0 0x20140520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
+ dma-coherent;
+ };
};
msi1: msi-controller1@1571000 {
--
2.37.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v2 09/11] arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma size
@ 2022-09-14 21:47 ` Li Yang
0 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:47 UTC (permalink / raw)
To: shawnguo, devicetree
Cc: robh+dt, linux-arm-kernel, linux-kernel, Laurentiu Tudor,
Robin Murphy, Li Yang
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Wrap the usb and sata controllers in an intermediate simple-bus and use
it to constrain the dma address size of these usb controllers to the 40
bits that they generate toward the interconnect. This is required
because the SoC uses 48 bits address sizes and this mismatch would lead
to smmu context faults because the usb generates 40-bit addresses while
the smmu page tables are populated with 48-bit wide addresses.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 92 ++++++++++---------
1 file changed, 50 insertions(+), 42 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 58c55335f09c..704f72caddd3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -816,51 +816,59 @@ QORIQ_CLK_PLL_DIV(1)>,
QORIQ_CLK_PLL_DIV(1)>;
};
- usb0: usb@2f00000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x2f00000 0x0 0x10000>;
- interrupts = <0 60 0x4>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- usb3-lpm-capable;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- status = "disabled";
- };
+ aux_bus: aux_bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+ usb0: usb@2f00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ status = "disabled";
+ };
- usb1: usb@3000000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x3000000 0x0 0x10000>;
- interrupts = <0 61 0x4>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- usb3-lpm-capable;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- status = "disabled";
- };
+ usb1: usb@3000000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3000000 0x0 0x10000>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ status = "disabled";
+ };
- usb2: usb@3100000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x3100000 0x0 0x10000>;
- interrupts = <0 63 0x4>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- usb3-lpm-capable;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- status = "disabled";
- };
+ usb2: usb@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ status = "disabled";
+ };
- sata: sata@3200000 {
- compatible = "fsl,ls1043a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>,
- <0x0 0x20140520 0x0 0x4>;
- reg-names = "ahci", "sata-ecc";
- interrupts = <0 69 0x4>;
- clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
- QORIQ_CLK_PLL_DIV(1)>;
- dma-coherent;
+ sata: sata@3200000 {
+ compatible = "fsl,ls1043a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x0 0x20140520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
+ dma-coherent;
+ };
};
msi1: msi-controller1@1571000 {
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v2 10/11] arm64: dts: ls1043a-qds: add mmio based mdio-mux support
2022-09-14 21:46 ` Li Yang
@ 2022-09-14 21:47 ` Li Yang
-1 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:47 UTC (permalink / raw)
To: shawnguo, devicetree; +Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang
There is mmio based mdio mux function in the FPGA device on ls1043a-qds
board. Add the mmio based mdio-mux nodes to ls1043a-qds boards and
add simple-mfd as a compatbile for the FPGA node to reflect the
multi-function nature of it. Also connect the ethernet interfaces to
these phy interfaces.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
.../boot/dts/freescale/fsl-ls1043a-qds.dts | 173 +++++++++++++++++-
1 file changed, 171 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index fea167d222cf..9b726c2a4842 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -3,7 +3,7 @@
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
+ * Copyright 2018-2021 NXP
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
@@ -24,6 +24,22 @@ aliases {
serial1 = &duart1;
serial2 = &duart2;
serial3 = &duart3;
+ sgmii-riser-s1-p1 = &sgmii_phy_s1_p1;
+ sgmii-riser-s2-p1 = &sgmii_phy_s2_p1;
+ sgmii-riser-s3-p1 = &sgmii_phy_s3_p1;
+ sgmii-riser-s4-p1 = &sgmii_phy_s4_p1;
+ qsgmii-s1-p1 = &qsgmii_phy_s1_p1;
+ qsgmii-s1-p2 = &qsgmii_phy_s1_p2;
+ qsgmii-s1-p3 = &qsgmii_phy_s1_p3;
+ qsgmii-s1-p4 = &qsgmii_phy_s1_p4;
+ qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
+ qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
+ qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
+ qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
+ emi1-slot1 = &ls1043mdio_s1;
+ emi1-slot2 = &ls1043mdio_s2;
+ emi1-slot3 = &ls1043mdio_s3;
+ emi1-slot4 = &ls1043mdio_s4;
};
chosen {
@@ -62,8 +78,11 @@ nand@1,0 {
};
fpga: board-control@2,0 {
- compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
+ compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
reg = <0x2 0x0 0x0000100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 2 0 0x100>;
};
};
@@ -153,3 +172,153 @@ &usb0 {
};
#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+ ethernet@e0000 {
+ phy-handle = <&qsgmii_phy_s2_p1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&qsgmii_phy_s2_p2>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&qsgmii_phy_s2_p3>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&qsgmii_phy_s2_p4>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 { /* DTSEC9/10GEC1 */
+ fixed-link = <1 1 10000 0 0>;
+ phy-connection-type = "xgmii";
+ };
+};
+
+&fpga {
+ mdio-mux-emi1@54 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1 */
+
+ /* On-board RGMII1 PHY */
+ ls1043mdio0: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+ reg = <0x1>;
+ };
+ };
+
+ /* On-board RGMII2 PHY */
+ ls1043mdio1: mdio@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+ reg = <0x2>;
+ };
+ };
+
+ /* Slot 1 */
+ ls1043mdio_s1: mdio@40 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s1_p1: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+
+ qsgmii_phy_s1_p2: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+
+ qsgmii_phy_s1_p3: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+
+ qsgmii_phy_s1_p4: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+
+ sgmii_phy_s1_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 2 */
+ ls1043mdio_s2: mdio@60 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s2_p1: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+
+ qsgmii_phy_s2_p2: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+
+ qsgmii_phy_s2_p3: ethernet-phy@a {
+ reg = <0xa>;
+ };
+
+ qsgmii_phy_s2_p4: ethernet-phy@b {
+ reg = <0xb>;
+ };
+
+ sgmii_phy_s2_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 3 */
+ ls1043mdio_s3: mdio@80 {
+ reg = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s3_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 4 */
+ ls1043mdio_s4: mdio@a0 {
+ reg = <0xa0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s4_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+ };
+};
--
2.37.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v2 10/11] arm64: dts: ls1043a-qds: add mmio based mdio-mux support
@ 2022-09-14 21:47 ` Li Yang
0 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:47 UTC (permalink / raw)
To: shawnguo, devicetree; +Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang
There is mmio based mdio mux function in the FPGA device on ls1043a-qds
board. Add the mmio based mdio-mux nodes to ls1043a-qds boards and
add simple-mfd as a compatbile for the FPGA node to reflect the
multi-function nature of it. Also connect the ethernet interfaces to
these phy interfaces.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
.../boot/dts/freescale/fsl-ls1043a-qds.dts | 173 +++++++++++++++++-
1 file changed, 171 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index fea167d222cf..9b726c2a4842 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -3,7 +3,7 @@
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
+ * Copyright 2018-2021 NXP
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
@@ -24,6 +24,22 @@ aliases {
serial1 = &duart1;
serial2 = &duart2;
serial3 = &duart3;
+ sgmii-riser-s1-p1 = &sgmii_phy_s1_p1;
+ sgmii-riser-s2-p1 = &sgmii_phy_s2_p1;
+ sgmii-riser-s3-p1 = &sgmii_phy_s3_p1;
+ sgmii-riser-s4-p1 = &sgmii_phy_s4_p1;
+ qsgmii-s1-p1 = &qsgmii_phy_s1_p1;
+ qsgmii-s1-p2 = &qsgmii_phy_s1_p2;
+ qsgmii-s1-p3 = &qsgmii_phy_s1_p3;
+ qsgmii-s1-p4 = &qsgmii_phy_s1_p4;
+ qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
+ qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
+ qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
+ qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
+ emi1-slot1 = &ls1043mdio_s1;
+ emi1-slot2 = &ls1043mdio_s2;
+ emi1-slot3 = &ls1043mdio_s3;
+ emi1-slot4 = &ls1043mdio_s4;
};
chosen {
@@ -62,8 +78,11 @@ nand@1,0 {
};
fpga: board-control@2,0 {
- compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
+ compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
reg = <0x2 0x0 0x0000100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 2 0 0x100>;
};
};
@@ -153,3 +172,153 @@ &usb0 {
};
#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+ ethernet@e0000 {
+ phy-handle = <&qsgmii_phy_s2_p1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&qsgmii_phy_s2_p2>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&qsgmii_phy_s2_p3>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&qsgmii_phy_s2_p4>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 { /* DTSEC9/10GEC1 */
+ fixed-link = <1 1 10000 0 0>;
+ phy-connection-type = "xgmii";
+ };
+};
+
+&fpga {
+ mdio-mux-emi1@54 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1 */
+
+ /* On-board RGMII1 PHY */
+ ls1043mdio0: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+ reg = <0x1>;
+ };
+ };
+
+ /* On-board RGMII2 PHY */
+ ls1043mdio1: mdio@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+ reg = <0x2>;
+ };
+ };
+
+ /* Slot 1 */
+ ls1043mdio_s1: mdio@40 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s1_p1: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+
+ qsgmii_phy_s1_p2: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+
+ qsgmii_phy_s1_p3: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+
+ qsgmii_phy_s1_p4: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+
+ sgmii_phy_s1_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 2 */
+ ls1043mdio_s2: mdio@60 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s2_p1: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+
+ qsgmii_phy_s2_p2: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+
+ qsgmii_phy_s2_p3: ethernet-phy@a {
+ reg = <0xa>;
+ };
+
+ qsgmii_phy_s2_p4: ethernet-phy@b {
+ reg = <0xb>;
+ };
+
+ sgmii_phy_s2_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 3 */
+ ls1043mdio_s3: mdio@80 {
+ reg = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s3_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 4 */
+ ls1043mdio_s4: mdio@a0 {
+ reg = <0xa0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s4_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+ };
+};
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v2 11/11] arm64: dts: ls1043a-rdb: add pcf85263 rtc node
2022-09-14 21:46 ` Li Yang
@ 2022-09-14 21:47 ` Li Yang
-1 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:47 UTC (permalink / raw)
To: shawnguo, devicetree; +Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang
Add the missing node for rtc device under i2c and fix style problems at
the same time.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index b290605e92cf..26f8540cb101 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -29,23 +29,33 @@ chosen {
&i2c0 {
status = "okay";
+
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
+
adt7461a@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
+
+ rtc@51 {
+ compatible = "nxp,pcf85263";
+ reg = <0x51>;
+ };
+
eeprom@52 {
compatible = "atmel,24c512";
reg = <0x52>;
};
+
eeprom@53 {
compatible = "atmel,24c512";
reg = <0x53>;
};
+
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
--
2.37.1
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v2 11/11] arm64: dts: ls1043a-rdb: add pcf85263 rtc node
@ 2022-09-14 21:47 ` Li Yang
0 siblings, 0 replies; 26+ messages in thread
From: Li Yang @ 2022-09-14 21:47 UTC (permalink / raw)
To: shawnguo, devicetree; +Cc: robh+dt, linux-arm-kernel, linux-kernel, Li Yang
Add the missing node for rtc device under i2c and fix style problems at
the same time.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index b290605e92cf..26f8540cb101 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -29,23 +29,33 @@ chosen {
&i2c0 {
status = "okay";
+
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
+
adt7461a@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
+
+ rtc@51 {
+ compatible = "nxp,pcf85263";
+ reg = <0x51>;
+ };
+
eeprom@52 {
compatible = "atmel,24c512";
reg = <0x52>;
};
+
eeprom@53 {
compatible = "atmel,24c512";
reg = <0x53>;
};
+
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH v2 00/11] accumulated dts updates for ls1043a
2022-09-14 21:46 ` Li Yang
@ 2022-09-16 12:12 ` Shawn Guo
-1 siblings, 0 replies; 26+ messages in thread
From: Shawn Guo @ 2022-09-16 12:12 UTC (permalink / raw)
To: Li Yang; +Cc: devicetree, robh+dt, linux-arm-kernel, linux-kernel
On Wed, Sep 14, 2022 at 04:46:52PM -0500, Li Yang wrote:
> v2 updates:
> - Use MACROs for interrupts and gpio property
>
> Hou Zhiqiang (2):
> arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
> arm64: dts: ls1043a: Add big-endian property for PCIe nodes
>
> Laurentiu Tudor (2):
> arm64: dts: ls1043a: add missing dma ranges property
> arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma
> size
>
> Li Yang (7):
> arm64: dts: ls1043a: fix the wrong size of dcfg space
> arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
> arm64: dts: ls1043a: use pcie aer/pme interrupts
> arm64: dts: ls1043a: make dma-coherent global to the SoC
> arm64: dts: ls1043a: add gpio based i2c recovery information
> arm64: dts: ls1043a-qds: add mmio based mdio-mux support
> arm64: dts: ls1043a-rdb: add pcf85263 rtc node
Applied all, thanks!
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2 00/11] accumulated dts updates for ls1043a
@ 2022-09-16 12:12 ` Shawn Guo
0 siblings, 0 replies; 26+ messages in thread
From: Shawn Guo @ 2022-09-16 12:12 UTC (permalink / raw)
To: Li Yang; +Cc: devicetree, robh+dt, linux-arm-kernel, linux-kernel
On Wed, Sep 14, 2022 at 04:46:52PM -0500, Li Yang wrote:
> v2 updates:
> - Use MACROs for interrupts and gpio property
>
> Hou Zhiqiang (2):
> arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
> arm64: dts: ls1043a: Add big-endian property for PCIe nodes
>
> Laurentiu Tudor (2):
> arm64: dts: ls1043a: add missing dma ranges property
> arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma
> size
>
> Li Yang (7):
> arm64: dts: ls1043a: fix the wrong size of dcfg space
> arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
> arm64: dts: ls1043a: use pcie aer/pme interrupts
> arm64: dts: ls1043a: make dma-coherent global to the SoC
> arm64: dts: ls1043a: add gpio based i2c recovery information
> arm64: dts: ls1043a-qds: add mmio based mdio-mux support
> arm64: dts: ls1043a-rdb: add pcf85263 rtc node
Applied all, thanks!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 26+ messages in thread