From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: broonie@kernel.org Cc: lgirdwood@gmail.com, bgoswami@quicinc.com, perex@perex.cz, tiwai@suse.com, linux-arm-msm@vger.kernel.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Subject: [PATCH 8/9] ASoC: qdsp6: audioreach: add support for MFC Module Date: Thu, 15 Sep 2022 13:38:36 +0100 [thread overview] Message-ID: <20220915123837.11591-9-srinivas.kandagatla@linaro.org> (raw) In-Reply-To: <20220915123837.11591-1-srinivas.kandagatla@linaro.org> Add support to enable and configure Media Format Converter (MFC) Module. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- sound/soc/qcom/qdsp6/audioreach.c | 53 ++++++++++++++++++++++++++++++- sound/soc/qcom/qdsp6/audioreach.h | 1 + 2 files changed, 53 insertions(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/audioreach.c b/sound/soc/qcom/qdsp6/audioreach.c index 168bc3020b74..05b58239cab6 100644 --- a/sound/soc/qcom/qdsp6/audioreach.c +++ b/sound/soc/qcom/qdsp6/audioreach.c @@ -159,6 +159,8 @@ struct apm_module_hw_ep_mf_cfg { #define APM_HW_EP_CFG_PSIZE ALIGN(sizeof(struct apm_module_hw_ep_mf_cfg), 8) +#define APM_MFC_CFG_PSIZE(p, n) ALIGN(struct_size(p, channel_mapping, n), 4) + struct apm_module_frame_size_factor_cfg { struct apm_module_param_data param_data; uint32_t frame_size_factor; @@ -727,6 +729,53 @@ static int audioreach_sal_set_media_format(struct q6apm_graph *graph, return rc; } +static int audioreach_mfc_set_media_format(struct q6apm_graph *graph, + struct audioreach_module *module, + struct audioreach_module_config *cfg) +{ + struct apm_module_param_data *param_data; + struct param_id_mfc_media_format *media_format; + uint32_t num_channels = cfg->num_channels; + int payload_size; + struct gpr_pkt *pkt; + int rc; + void *p; + + payload_size = APM_MFC_CFG_PSIZE(media_format, num_channels) + + APM_MODULE_PARAM_DATA_SIZE; + + pkt = audioreach_alloc_apm_cmd_pkt(payload_size, APM_CMD_SET_CFG, 0); + if (IS_ERR(pkt)) + return PTR_ERR(pkt); + + p = (void *)pkt + GPR_HDR_SIZE + APM_CMD_HDR_SIZE; + + param_data = p; + param_data->module_instance_id = module->instance_id; + param_data->error_code = 0; + param_data->param_id = PARAM_ID_MFC_OUTPUT_MEDIA_FORMAT; + param_data->param_size = APM_MFC_CFG_PSIZE(media_format, num_channels); + p = p + APM_MODULE_PARAM_DATA_SIZE; + media_format = p; + + media_format->sample_rate = cfg->sample_rate; + media_format->bit_width = cfg->bit_width; + media_format->num_channels = cfg->num_channels; + + if (num_channels == 1) { + media_format->channel_mapping[0] = PCM_CHANNEL_L; + } else if (num_channels == 2) { + media_format->channel_mapping[0] = PCM_CHANNEL_L; + media_format->channel_mapping[1] = PCM_CHANNEL_R; + } + + rc = q6apm_send_cmd_sync(graph->apm, pkt, 0); + + kfree(pkt); + + return rc; +} + static int audioreach_i2s_set_media_format(struct q6apm_graph *graph, struct audioreach_module *module, struct audioreach_module_config *cfg) @@ -1051,7 +1100,9 @@ int audioreach_set_media_format(struct q6apm_graph *graph, struct audioreach_mod audioreach_sal_set_media_format(graph, module, cfg); audioreach_sal_limiter_enable(graph, module, true); break; - + case MODULE_ID_MFC: + rc = audioreach_mfc_set_media_format(graph, module, cfg); + break; default: rc = 0; } diff --git a/sound/soc/qcom/qdsp6/audioreach.h b/sound/soc/qcom/qdsp6/audioreach.h index f2b51d8fc718..707dfbdbc156 100644 --- a/sound/soc/qcom/qdsp6/audioreach.h +++ b/sound/soc/qcom/qdsp6/audioreach.h @@ -16,6 +16,7 @@ struct q6apm_graph; #define MODULE_ID_PCM_ENC 0x07001004 #define MODULE_ID_PCM_DEC 0x07001005 #define MODULE_ID_SAL 0x07001010 +#define MODULE_ID_MFC 0x07001015 #define MODULE_ID_CODEC_DMA_SINK 0x07001023 #define MODULE_ID_CODEC_DMA_SOURCE 0x07001024 #define MODULE_ID_I2S_SINK 0x0700100A -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: broonie@kernel.org Cc: alsa-devel@alsa-project.org, linux-arm-msm@vger.kernel.org, tiwai@suse.com, lgirdwood@gmail.com, Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, bgoswami@quicinc.com, linux-kernel@vger.kernel.org Subject: [PATCH 8/9] ASoC: qdsp6: audioreach: add support for MFC Module Date: Thu, 15 Sep 2022 13:38:36 +0100 [thread overview] Message-ID: <20220915123837.11591-9-srinivas.kandagatla@linaro.org> (raw) In-Reply-To: <20220915123837.11591-1-srinivas.kandagatla@linaro.org> Add support to enable and configure Media Format Converter (MFC) Module. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- sound/soc/qcom/qdsp6/audioreach.c | 53 ++++++++++++++++++++++++++++++- sound/soc/qcom/qdsp6/audioreach.h | 1 + 2 files changed, 53 insertions(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/audioreach.c b/sound/soc/qcom/qdsp6/audioreach.c index 168bc3020b74..05b58239cab6 100644 --- a/sound/soc/qcom/qdsp6/audioreach.c +++ b/sound/soc/qcom/qdsp6/audioreach.c @@ -159,6 +159,8 @@ struct apm_module_hw_ep_mf_cfg { #define APM_HW_EP_CFG_PSIZE ALIGN(sizeof(struct apm_module_hw_ep_mf_cfg), 8) +#define APM_MFC_CFG_PSIZE(p, n) ALIGN(struct_size(p, channel_mapping, n), 4) + struct apm_module_frame_size_factor_cfg { struct apm_module_param_data param_data; uint32_t frame_size_factor; @@ -727,6 +729,53 @@ static int audioreach_sal_set_media_format(struct q6apm_graph *graph, return rc; } +static int audioreach_mfc_set_media_format(struct q6apm_graph *graph, + struct audioreach_module *module, + struct audioreach_module_config *cfg) +{ + struct apm_module_param_data *param_data; + struct param_id_mfc_media_format *media_format; + uint32_t num_channels = cfg->num_channels; + int payload_size; + struct gpr_pkt *pkt; + int rc; + void *p; + + payload_size = APM_MFC_CFG_PSIZE(media_format, num_channels) + + APM_MODULE_PARAM_DATA_SIZE; + + pkt = audioreach_alloc_apm_cmd_pkt(payload_size, APM_CMD_SET_CFG, 0); + if (IS_ERR(pkt)) + return PTR_ERR(pkt); + + p = (void *)pkt + GPR_HDR_SIZE + APM_CMD_HDR_SIZE; + + param_data = p; + param_data->module_instance_id = module->instance_id; + param_data->error_code = 0; + param_data->param_id = PARAM_ID_MFC_OUTPUT_MEDIA_FORMAT; + param_data->param_size = APM_MFC_CFG_PSIZE(media_format, num_channels); + p = p + APM_MODULE_PARAM_DATA_SIZE; + media_format = p; + + media_format->sample_rate = cfg->sample_rate; + media_format->bit_width = cfg->bit_width; + media_format->num_channels = cfg->num_channels; + + if (num_channels == 1) { + media_format->channel_mapping[0] = PCM_CHANNEL_L; + } else if (num_channels == 2) { + media_format->channel_mapping[0] = PCM_CHANNEL_L; + media_format->channel_mapping[1] = PCM_CHANNEL_R; + } + + rc = q6apm_send_cmd_sync(graph->apm, pkt, 0); + + kfree(pkt); + + return rc; +} + static int audioreach_i2s_set_media_format(struct q6apm_graph *graph, struct audioreach_module *module, struct audioreach_module_config *cfg) @@ -1051,7 +1100,9 @@ int audioreach_set_media_format(struct q6apm_graph *graph, struct audioreach_mod audioreach_sal_set_media_format(graph, module, cfg); audioreach_sal_limiter_enable(graph, module, true); break; - + case MODULE_ID_MFC: + rc = audioreach_mfc_set_media_format(graph, module, cfg); + break; default: rc = 0; } diff --git a/sound/soc/qcom/qdsp6/audioreach.h b/sound/soc/qcom/qdsp6/audioreach.h index f2b51d8fc718..707dfbdbc156 100644 --- a/sound/soc/qcom/qdsp6/audioreach.h +++ b/sound/soc/qcom/qdsp6/audioreach.h @@ -16,6 +16,7 @@ struct q6apm_graph; #define MODULE_ID_PCM_ENC 0x07001004 #define MODULE_ID_PCM_DEC 0x07001005 #define MODULE_ID_SAL 0x07001010 +#define MODULE_ID_MFC 0x07001015 #define MODULE_ID_CODEC_DMA_SINK 0x07001023 #define MODULE_ID_CODEC_DMA_SOURCE 0x07001024 #define MODULE_ID_I2S_SINK 0x0700100A -- 2.21.0
next prev parent reply other threads:[~2022-09-15 12:39 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-15 12:38 [PATCH 0/9] ASoC: qdsp6: audioreach: add multi-port, SAL and MFC support Srinivas Kandagatla 2022-09-15 12:38 ` Srinivas Kandagatla 2022-09-15 12:38 ` [PATCH 1/9] ASoC: qdsp6: audioreach: topology use idr_alloc_u32 Srinivas Kandagatla 2022-09-15 12:38 ` Srinivas Kandagatla 2022-09-15 12:38 ` [PATCH 2/9] ASoC: qdsp6: audioreach: remove unused connection_list Srinivas Kandagatla 2022-09-15 12:38 ` Srinivas Kandagatla 2022-09-15 12:38 ` [PATCH 3/9] ASoC: qdsp6: audioreach: update dapm kcontrol private data Srinivas Kandagatla 2022-09-15 12:38 ` Srinivas Kandagatla 2022-09-15 12:38 ` [PATCH 4/9] ASoC: qdsp6: audioreach: Simplify handing FE and BE graph connections Srinivas Kandagatla 2022-09-15 12:38 ` Srinivas Kandagatla 2022-09-15 12:38 ` [PATCH 5/9] ASoC: qdsp6: audioreach: simplify module_list sz calculation Srinivas Kandagatla 2022-09-15 12:38 ` Srinivas Kandagatla 2022-09-15 12:38 ` [PATCH 6/9] ASoC: qdsp6: audioreach: add support for more port connections Srinivas Kandagatla 2022-09-15 12:38 ` Srinivas Kandagatla 2022-09-15 12:38 ` [PATCH 7/9] ASoC: qdsp6: audioreach: add support to enable SAL Module Srinivas Kandagatla 2022-09-15 12:38 ` Srinivas Kandagatla 2022-09-16 6:32 ` kernel test robot 2022-09-16 6:32 ` kernel test robot 2022-09-15 12:38 ` Srinivas Kandagatla [this message] 2022-09-15 12:38 ` [PATCH 8/9] ASoC: qdsp6: audioreach: add support for MFC Module Srinivas Kandagatla 2022-09-15 12:38 ` [PATCH 9/9] ASoC: qdsp6: audioreach: add support to enable module command Srinivas Kandagatla 2022-09-15 12:38 ` Srinivas Kandagatla 2022-10-28 19:24 ` [PATCH 0/9] ASoC: qdsp6: audioreach: add multi-port, SAL and MFC support Mark Brown 2022-10-28 19:24 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220915123837.11591-9-srinivas.kandagatla@linaro.org \ --to=srinivas.kandagatla@linaro.org \ --cc=alsa-devel@alsa-project.org \ --cc=bgoswami@quicinc.com \ --cc=broonie@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=perex@perex.cz \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.