[PATCH 1/7] ARM: imx: Enable USB ethernet on i.MX8M Plus DHCOM

[PATCH 1/7] ARM: imx: Enable USB ethernet on i.MX8M Plus DHCOM

[Marek Vasut]

Enable both USB CDC ethernet and USB host ethernet on i.MX8M Plus DHCOM.
This is useful for bringing up systems without ethernet plug, but with
either USB host or gadget plug.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
---
 configs/imx8mp_dhcom_pdk2_defconfig | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig
index f3b69070698..2ea5c9a2b1b 100644
--- a/configs/imx8mp_dhcom_pdk2_defconfig
+++ b/configs/imx8mp_dhcom_pdk2_defconfig
@@ -86,6 +86,7 @@ CONFIG_MD5SUM_VERIFY=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_SHA1SUM=y
 CONFIG_SHA1SUM_VERIFY=y
+CONFIG_CMD_BIND=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_FUSE=y
@@ -239,20 +240,23 @@ CONFIG_DM_THERMAL=y
 CONFIG_IMX_TMU=y
 CONFIG_USB=y
 # CONFIG_SPL_DM_USB is not set
+CONFIG_DM_USB_GADGET=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_DWC3=y
-# CONFIG_USB_DWC3_GADGET is not set
 CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="DH electronics"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_CI_UDC=y
 CONFIG_SDP_LOADADDR=0x0
 CONFIG_USB_FUNCTION_ACM=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
 CONFIG_IMX_WATCHDOG=y
 CONFIG_OF_LIBFDT_OVERLAY=y
-- 
2.35.1

[PATCH 2/7] ARM: dts: imx: Add HW variant details to i.MX8M Plus DHCOM PDK2

[Marek Vasut]

Add information about which exact SoM variant is used on which PDK2 variant.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
---
 arch/arm/dts/imx8mp-dhcom-pdk2.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/dts/imx8mp-dhcom-pdk2.dts b/arch/arm/dts/imx8mp-dhcom-pdk2.dts
index e95abfb3e89..7148234a4f1 100644
--- a/arch/arm/dts/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm/dts/imx8mp-dhcom-pdk2.dts
@@ -1,6 +1,11 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * PDK2 PCB number: 516-400 or newer
  */
 
 /dts-v1/;
-- 
2.35.1

[PATCH 2/7] ARM: dts: imx: Add HW variant details to i.MX8M Plus DHCOM PDK2

[sbabic]

> Add information about which exact SoM variant is used on which PDK2 variant.
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Fabio Estevam <festevam@denx.de>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: uboot-imx <uboot-imx@nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 3/7] ARM: dts: imx: Drop Atheros PHY header from i.MX8M Plus DHCOM PDK2

[Marek Vasut]

This PHY is not used on PDK2, the header was added due to copy-paste
error, drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
---
 arch/arm/dts/imx8mp-dhcom-pdk2.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/dts/imx8mp-dhcom-pdk2.dts b/arch/arm/dts/imx8mp-dhcom-pdk2.dts
index 7148234a4f1..0fcead35879 100644
--- a/arch/arm/dts/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm/dts/imx8mp-dhcom-pdk2.dts
@@ -11,7 +11,6 @@
 /dts-v1/;
 
 #include <dt-bindings/leds/common.h>
-#include <dt-bindings/net/qca-ar803x.h>
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mp-dhcom-som.dtsi"
 
-- 
2.35.1

[PATCH 3/7] ARM: dts: imx: Drop Atheros PHY header from i.MX8M Plus DHCOM PDK2

[sbabic]

> This PHY is not used on PDK2, the header was added due to copy-paste
> error, drop it.
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Fabio Estevam <festevam@denx.de>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: uboot-imx <uboot-imx@nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 4/7] ARM: dts: imx: Add SoM compatible to i.MX8M Plus DHCOM PDK2

[Marek Vasut]

Add SoM compatible string into i.MX8MP DHCOM PDK2 compatible strings.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
---
 arch/arm/dts/imx8mp-dhcom-pdk2.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/imx8mp-dhcom-pdk2.dts b/arch/arm/dts/imx8mp-dhcom-pdk2.dts
index 0fcead35879..c9a481ac9a8 100644
--- a/arch/arm/dts/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm/dts/imx8mp-dhcom-pdk2.dts
@@ -16,7 +16,8 @@
 
 / {
 	model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)";
-	compatible = "dh,imx8mp-dhcom-pdk2", "fsl,imx8mp";
+	compatible = "dh,imx8mp-dhcom-pdk2", "dh,imx8mp-dhcom-som",
+	             "fsl,imx8mp";
 
 	chosen {
 		stdout-path = &uart1;
-- 
2.35.1

[PATCH 4/7] ARM: dts: imx: Add SoM compatible to i.MX8M Plus DHCOM PDK2

[sbabic]

> Add SoM compatible string into i.MX8MP DHCOM PDK2 compatible strings.
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Fabio Estevam <festevam@denx.de>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: uboot-imx <uboot-imx@nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 5/7] ARM: dts: imx: Rename imx8mp-dhcom{-pdk2,}-boot.dtsi

[Marek Vasut]

Rename imx8mp-dhcom-pdk2-u-boot.dtsi to imx8mp-dhcom-u-boot.dtsi, since
this file is shared by PDK2, PicoITX and DRC02. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
---
 arch/arm/dts/imx8mp-dhcom-pdk2-u-boot.dtsi | 137 +-------------------
 arch/arm/dts/imx8mp-dhcom-u-boot.dtsi      | 141 +++++++++++++++++++++
 2 files changed, 142 insertions(+), 136 deletions(-)
 create mode 100644 arch/arm/dts/imx8mp-dhcom-u-boot.dtsi

diff --git a/arch/arm/dts/imx8mp-dhcom-pdk2-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-pdk2-u-boot.dtsi
index ae838caebcf..be2d4fb184a 100644
--- a/arch/arm/dts/imx8mp-dhcom-pdk2-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-dhcom-pdk2-u-boot.dtsi
@@ -3,139 +3,4 @@
  * Copyright (C) 2022 Marek Vasut <marex@denx.de>
  */
 
-#include "imx8mp-u-boot.dtsi"
-
-/ {
-	aliases {
-		eeprom0 = &eeprom0;
-		eeprom1 = &eeprom1;
-		mmc0 = &usdhc2;	/* MicroSD */
-		mmc1 = &usdhc3;	/* eMMC */
-		mmc2 = &usdhc1;	/* SDIO */
-	};
-
-	config {
-		dh,ram-coding-gpios = <&gpio3 22 0>, <&gpio3 23 0>, <&gpio3 24 0>;
-	};
-
-	wdt-reboot {
-		compatible = "wdt-reboot";
-		wdt = <&wdog1>;
-		u-boot,dm-spl;
-	};
-};
-
-&buck4 {
-	u-boot,dm-spl;
-};
-
-&buck5 {
-	u-boot,dm-spl;
-};
-
-&eqos {
-	/delete-property/ assigned-clocks;
-	/delete-property/ assigned-clock-parents;
-	/delete-property/ assigned-clock-rates;
-};
-
-&gpio1 {
-	u-boot,dm-spl;
-};
-
-&gpio2 {
-	u-boot,dm-spl;
-};
-
-&gpio3 {
-	u-boot,dm-spl;
-};
-
-&gpio4 {
-	u-boot,dm-spl;
-};
-
-&gpio5 {
-	u-boot,dm-spl;
-};
-
-&i2c3 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_i2c3 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_i2c3_gpio {
-	u-boot,dm-spl;
-};
-
-&pinctrl_pmic {
-	u-boot,dm-spl;
-};
-
-&pinctrl_uart1 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc2 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc2_100mhz {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc2_200mhz {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc2_vmmc {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc3 {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc3_100mhz {
-	u-boot,dm-spl;
-};
-
-&pinctrl_usdhc3_100mhz {
-	u-boot,dm-spl;
-};
-
-&pmic {
-	u-boot,dm-spl;
-
-	regulators {
-		u-boot,dm-spl;
-	};
-};
-
-&reg_usdhc2_vmmc {
-	u-boot,dm-spl;
-};
-
-&uart1 {
-	u-boot,dm-spl;
-};
-
-/* SDIO WiFi */
-&usdhc1 {
-	status = "disabled";
-};
-
-&usdhc2 {
-	u-boot,dm-spl;
-};
-
-&usdhc3 {
-	u-boot,dm-spl;
-};
-
-&wdog1 {
-	u-boot,dm-spl;
-};
+#include "imx8mp-dhcom-u-boot.dtsi"
diff --git a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
new file mode 100644
index 00000000000..ae838caebcf
--- /dev/null
+++ b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx8mp-u-boot.dtsi"
+
+/ {
+	aliases {
+		eeprom0 = &eeprom0;
+		eeprom1 = &eeprom1;
+		mmc0 = &usdhc2;	/* MicroSD */
+		mmc1 = &usdhc3;	/* eMMC */
+		mmc2 = &usdhc1;	/* SDIO */
+	};
+
+	config {
+		dh,ram-coding-gpios = <&gpio3 22 0>, <&gpio3 23 0>, <&gpio3 24 0>;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+};
+
+&buck4 {
+	u-boot,dm-spl;
+};
+
+&buck5 {
+	u-boot,dm-spl;
+};
+
+&eqos {
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	/delete-property/ assigned-clock-rates;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&i2c3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c3_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_100mhz {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_200mhz {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_vmmc {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3_100mhz {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3_100mhz {
+	u-boot,dm-spl;
+};
+
+&pmic {
+	u-boot,dm-spl;
+
+	regulators {
+		u-boot,dm-spl;
+	};
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,dm-spl;
+};
+
+&uart1 {
+	u-boot,dm-spl;
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	status = "disabled";
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
-- 
2.35.1

[PATCH 5/7] ARM: dts: imx: Rename imx8mp-dhcom{-pdk2,}-boot.dtsi

[sbabic]

> Rename imx8mp-dhcom-pdk2-u-boot.dtsi to imx8mp-dhcom-u-boot.dtsi, since
> this file is shared by PDK2, PicoITX and DRC02. No functional change.
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Fabio Estevam <festevam@denx.de>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: uboot-imx <uboot-imx@nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 6/7] ARM: dts: imx: Adjust ECSPI1 pinmux on i.MX8M Plus DHCOM

[Marek Vasut]

The ECSPI1 is on I2C1/I2C2 pins of the SoC, update the pinmux accordingly.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
---
 arch/arm/dts/imx8mp-dhcom-som.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/dts/imx8mp-dhcom-som.dtsi b/arch/arm/dts/imx8mp-dhcom-som.dtsi
index 63cc6c92c41..0960c238871 100644
--- a/arch/arm/dts/imx8mp-dhcom-som.dtsi
+++ b/arch/arm/dts/imx8mp-dhcom-som.dtsi
@@ -70,7 +70,7 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
@@ -660,10 +660,10 @@
 
 	pinctrl_ecspi1: dhcom-ecspi1-grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x44
-			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x44
-			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x44
-			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40
+			MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK		0x44
+			MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI		0x44
+			MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO		0x44
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x40
 		>;
 	};
 
-- 
2.35.1

[PATCH 6/7] ARM: dts: imx: Adjust ECSPI1 pinmux on i.MX8M Plus DHCOM

[sbabic]

> The ECSPI1 is on I2C1/I2C2 pins of the SoC, update the pinmux accordingly.
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Fabio Estevam <festevam@denx.de>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: uboot-imx <uboot-imx@nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 7/7] ARM: dts: imx: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM

[Marek Vasut]

Fix copy-paste error of the I2C5 bus recovery GPIO assignment,
the I2C5 GPIOs are on gpio3 instead of gpio5.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
---
 arch/arm/dts/imx8mp-dhcom-som.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/imx8mp-dhcom-som.dtsi b/arch/arm/dts/imx8mp-dhcom-som.dtsi
index 0960c238871..197840d1a6a 100644
--- a/arch/arm/dts/imx8mp-dhcom-som.dtsi
+++ b/arch/arm/dts/imx8mp-dhcom-som.dtsi
@@ -415,8 +415,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c5>;
 	pinctrl-1 = <&pinctrl_i2c5_gpio>;
-	scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
-- 
2.35.1

[PATCH 7/7] ARM: dts: imx: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM

[sbabic]

> Fix copy-paste error of the I2C5 bus recovery GPIO assignment,
> the I2C5 GPIOs are on gpio3 instead of gpio5.
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Fabio Estevam <festevam@denx.de>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: uboot-imx <uboot-imx@nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 1/7] ARM: imx: Enable USB ethernet on i.MX8M Plus DHCOM

[sbabic]

> Enable both USB CDC ethernet and USB host ethernet on i.MX8M Plus DHCOM.
> This is useful for bringing up systems without ethernet plug, but with
> either USB host or gadget plug.
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Fabio Estevam <festevam@denx.de>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: uboot-imx <uboot-imx@nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================