* [PATCH 0/2] dmaengine: idxd: Fix up re-enabling device workqueues
@ 2022-09-19 21:55 Jerry Snitselaar
2022-09-19 21:55 ` [PATCH 1/2] dmaengine: idxd: Set wq state to disabled in idxd_wq_disable_cleanup() Jerry Snitselaar
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Jerry Snitselaar @ 2022-09-19 21:55 UTC (permalink / raw)
To: linux-kernel, dmaengine; +Cc: Fenghua Yu, Dave Jiang, Vinod Koul
Currently if a software reset is attempted on an idxd device
the workqueues will not be re-enabled, because it will see
incorrectly see that wq->state is already set to IDXD_WQ_ENABLED.
So set the workqueue state to disabled in idxd_wq_disable_cleanup(),
and use a bitmap to track which workqueues have been enabled so they
can be re-enabled during device re-initialization.
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Jerry Snitselaar (2):
dmaengine: idxd: Set wq state to disabled in idxd_wq_disable_cleanup()
dmaengine: idxd: track enabled workqueues in bitmap
drivers/dma/idxd/device.c | 4 +++-
drivers/dma/idxd/idxd.h | 2 ++
drivers/dma/idxd/init.c | 6 ++++++
drivers/dma/idxd/irq.c | 4 ++--
drivers/dma/idxd/sysfs.c | 1 +
5 files changed, 14 insertions(+), 3 deletions(-)
--
2.37.2
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] dmaengine: idxd: Set wq state to disabled in idxd_wq_disable_cleanup()
2022-09-19 21:55 [PATCH 0/2] dmaengine: idxd: Fix up re-enabling device workqueues Jerry Snitselaar
@ 2022-09-19 21:55 ` Jerry Snitselaar
2022-09-19 21:55 ` [PATCH 2/2] dmaengine: idxd: track enabled workqueues in bitmap Jerry Snitselaar
2022-09-19 22:07 ` [PATCH 0/2] dmaengine: idxd: Fix up re-enabling device workqueues Dave Jiang
2 siblings, 0 replies; 6+ messages in thread
From: Jerry Snitselaar @ 2022-09-19 21:55 UTC (permalink / raw)
To: linux-kernel, dmaengine; +Cc: Fenghua Yu, Dave Jiang, Vinod Koul
If we are calling idxd_wq_disable_cleanup(), the workqueue should be
in a disabled state. So set the workqueue state to IDXD_WQ_DISABLED so
that the state reflects that. Currently if there is a device failure,
and a software reset is attempted the workqueues will not be
re-enabled due to idxd_wq_enable() seeing that state as already being
IDXD_WQ_ENABLED.
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
---
drivers/dma/idxd/device.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 5a8cc52c1abf..31911e255ac1 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -258,7 +258,6 @@ void idxd_wq_reset(struct idxd_wq *wq)
operand = BIT(wq->id % 16) | ((wq->id / 16) << 16);
idxd_cmd_exec(idxd, IDXD_CMD_RESET_WQ, operand, NULL);
idxd_wq_disable_cleanup(wq);
- wq->state = IDXD_WQ_DISABLED;
}
int idxd_wq_map_portal(struct idxd_wq *wq)
@@ -378,6 +377,7 @@ static void idxd_wq_disable_cleanup(struct idxd_wq *wq)
struct idxd_device *idxd = wq->idxd;
lockdep_assert_held(&wq->wq_lock);
+ wq->state = IDXD_WQ_DISABLED;
memset(wq->wqcfg, 0, idxd->wqcfg_size);
wq->type = IDXD_WQT_NONE;
wq->threshold = 0;
--
2.37.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] dmaengine: idxd: track enabled workqueues in bitmap
2022-09-19 21:55 [PATCH 0/2] dmaengine: idxd: Fix up re-enabling device workqueues Jerry Snitselaar
2022-09-19 21:55 ` [PATCH 1/2] dmaengine: idxd: Set wq state to disabled in idxd_wq_disable_cleanup() Jerry Snitselaar
@ 2022-09-19 21:55 ` Jerry Snitselaar
2022-09-28 15:21 ` Jerry Snitselaar
2022-09-19 22:07 ` [PATCH 0/2] dmaengine: idxd: Fix up re-enabling device workqueues Dave Jiang
2 siblings, 1 reply; 6+ messages in thread
From: Jerry Snitselaar @ 2022-09-19 21:55 UTC (permalink / raw)
To: linux-kernel, dmaengine; +Cc: Fenghua Yu, Dave Jiang, Vinod Koul
Now that idxd_wq_disable_cleanup() sets the workqueue state to
IDXD_WQ_DISABLED, use a bitmap to track which workqueues have been
enabled. This will then be used to determine which workqueues
should be re-enabled when attempting a software reset to recover
from a device halt state.
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
---
drivers/dma/idxd/device.c | 2 ++
drivers/dma/idxd/idxd.h | 2 ++
drivers/dma/idxd/init.c | 6 ++++++
drivers/dma/idxd/irq.c | 4 ++--
drivers/dma/idxd/sysfs.c | 1 +
5 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 31911e255ac1..f0c7d6d348e3 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -196,6 +196,7 @@ int idxd_wq_enable(struct idxd_wq *wq)
}
wq->state = IDXD_WQ_ENABLED;
+ set_bit(wq->id, idxd->wq_enable_map);
dev_dbg(dev, "WQ %d enabled\n", wq->id);
return 0;
}
@@ -223,6 +224,7 @@ int idxd_wq_disable(struct idxd_wq *wq, bool reset_config)
if (reset_config)
idxd_wq_disable_cleanup(wq);
+ clear_bit(wq->id, idxd->wq_enable_map);
wq->state = IDXD_WQ_DISABLED;
dev_dbg(dev, "WQ %d disabled\n", wq->id);
return 0;
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index fed0dfc1eaa8..f527a7f88b92 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -11,6 +11,7 @@
#include <linux/idr.h>
#include <linux/pci.h>
#include <linux/ioasid.h>
+#include <linux/bitmap.h>
#include <linux/perf_event.h>
#include <uapi/linux/idxd.h>
#include "registers.h"
@@ -299,6 +300,7 @@ struct idxd_device {
int rdbuf_limit;
int nr_rdbufs; /* non-reserved read buffers */
unsigned int wqcfg_size;
+ unsigned long *wq_enable_map;
union sw_err_reg sw_err;
wait_queue_head_t cmd_waitq;
diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
index aa3478257ddb..7e27e69ff741 100644
--- a/drivers/dma/idxd/init.c
+++ b/drivers/dma/idxd/init.c
@@ -151,6 +151,12 @@ static int idxd_setup_wqs(struct idxd_device *idxd)
if (!idxd->wqs)
return -ENOMEM;
+ idxd->wq_enable_map = bitmap_zalloc_node(idxd->max_wqs, GFP_KERNEL, dev_to_node(dev));
+ if (!idxd->wq_enable_map) {
+ kfree(idxd->wqs);
+ return -ENOMEM;
+ }
+
for (i = 0; i < idxd->max_wqs; i++) {
wq = kzalloc_node(sizeof(*wq), GFP_KERNEL, dev_to_node(dev));
if (!wq) {
diff --git a/drivers/dma/idxd/irq.c b/drivers/dma/idxd/irq.c
index 743ead5ebc57..8efaf137fc65 100644
--- a/drivers/dma/idxd/irq.c
+++ b/drivers/dma/idxd/irq.c
@@ -49,9 +49,9 @@ static void idxd_device_reinit(struct work_struct *work)
goto out;
for (i = 0; i < idxd->max_wqs; i++) {
- struct idxd_wq *wq = idxd->wqs[i];
+ if (test_bit(i, idxd->wq_enable_map)) {
+ struct idxd_wq *wq = idxd->wqs[i];
- if (wq->state == IDXD_WQ_ENABLED) {
rc = idxd_wq_enable(wq);
if (rc < 0) {
dev_warn(dev, "Unable to re-enable wq %s\n",
diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
index 3f262a57441b..3325b16ed959 100644
--- a/drivers/dma/idxd/sysfs.c
+++ b/drivers/dma/idxd/sysfs.c
@@ -1405,6 +1405,7 @@ static void idxd_conf_device_release(struct device *dev)
struct idxd_device *idxd = confdev_to_idxd(dev);
kfree(idxd->groups);
+ bitmap_free(idxd->wq_enable_map);
kfree(idxd->wqs);
kfree(idxd->engines);
ida_free(&idxd_ida, idxd->id);
--
2.37.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] dmaengine: idxd: Fix up re-enabling device workqueues
2022-09-19 21:55 [PATCH 0/2] dmaengine: idxd: Fix up re-enabling device workqueues Jerry Snitselaar
2022-09-19 21:55 ` [PATCH 1/2] dmaengine: idxd: Set wq state to disabled in idxd_wq_disable_cleanup() Jerry Snitselaar
2022-09-19 21:55 ` [PATCH 2/2] dmaengine: idxd: track enabled workqueues in bitmap Jerry Snitselaar
@ 2022-09-19 22:07 ` Dave Jiang
2 siblings, 0 replies; 6+ messages in thread
From: Dave Jiang @ 2022-09-19 22:07 UTC (permalink / raw)
To: Jerry Snitselaar, linux-kernel, dmaengine
Cc: Fenghua Yu, Vinod Koul, Fengqian Gao, Shen, Xiaochen
On 9/19/2022 2:55 PM, Jerry Snitselaar wrote:
> Currently if a software reset is attempted on an idxd device
> the workqueues will not be re-enabled, because it will see
> incorrectly see that wq->state is already set to IDXD_WQ_ENABLED.
> So set the workqueue state to disabled in idxd_wq_disable_cleanup(),
> and use a bitmap to track which workqueues have been enabled so they
> can be re-enabled during device re-initialization.
>
> Cc: Fenghua Yu <fenghua.yu@intel.com>
> Cc: Dave Jiang <dave.jiang@intel.com>
> Cc: Vinod Koul <vkoul@kernel.org>
For the series,
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Thank you Jerry!
> Jerry Snitselaar (2):
> dmaengine: idxd: Set wq state to disabled in idxd_wq_disable_cleanup()
> dmaengine: idxd: track enabled workqueues in bitmap
>
> drivers/dma/idxd/device.c | 4 +++-
> drivers/dma/idxd/idxd.h | 2 ++
> drivers/dma/idxd/init.c | 6 ++++++
> drivers/dma/idxd/irq.c | 4 ++--
> drivers/dma/idxd/sysfs.c | 1 +
> 5 files changed, 14 insertions(+), 3 deletions(-)
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] dmaengine: idxd: track enabled workqueues in bitmap
2022-09-19 21:55 ` [PATCH 2/2] dmaengine: idxd: track enabled workqueues in bitmap Jerry Snitselaar
@ 2022-09-28 15:21 ` Jerry Snitselaar
2022-09-28 15:38 ` Dave Jiang
0 siblings, 1 reply; 6+ messages in thread
From: Jerry Snitselaar @ 2022-09-28 15:21 UTC (permalink / raw)
To: linux-kernel, dmaengine; +Cc: Fenghua Yu, Dave Jiang, Vinod Koul
On Mon, Sep 19, 2022 at 02:55:53PM -0700, Jerry Snitselaar wrote:
> Now that idxd_wq_disable_cleanup() sets the workqueue state to
> IDXD_WQ_DISABLED, use a bitmap to track which workqueues have been
> enabled. This will then be used to determine which workqueues
> should be re-enabled when attempting a software reset to recover
> from a device halt state.
>
> Cc: Fenghua Yu <fenghua.yu@intel.com>
> Cc: Dave Jiang <dave.jiang@intel.com>
> Cc: Vinod Koul <vkoul@kernel.org>
> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
> ---
> drivers/dma/idxd/device.c | 2 ++
> drivers/dma/idxd/idxd.h | 2 ++
> drivers/dma/idxd/init.c | 6 ++++++
> drivers/dma/idxd/irq.c | 4 ++--
> drivers/dma/idxd/sysfs.c | 1 +
> 5 files changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
> index 31911e255ac1..f0c7d6d348e3 100644
> --- a/drivers/dma/idxd/device.c
> +++ b/drivers/dma/idxd/device.c
> @@ -196,6 +196,7 @@ int idxd_wq_enable(struct idxd_wq *wq)
> }
>
> wq->state = IDXD_WQ_ENABLED;
> + set_bit(wq->id, idxd->wq_enable_map);
> dev_dbg(dev, "WQ %d enabled\n", wq->id);
> return 0;
> }
> @@ -223,6 +224,7 @@ int idxd_wq_disable(struct idxd_wq *wq, bool reset_config)
>
> if (reset_config)
> idxd_wq_disable_cleanup(wq);
> + clear_bit(wq->id, idxd->wq_enable_map);
> wq->state = IDXD_WQ_DISABLED;
> dev_dbg(dev, "WQ %d disabled\n", wq->id);
> return 0;
> diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
> index fed0dfc1eaa8..f527a7f88b92 100644
> --- a/drivers/dma/idxd/idxd.h
> +++ b/drivers/dma/idxd/idxd.h
> @@ -11,6 +11,7 @@
> #include <linux/idr.h>
> #include <linux/pci.h>
> #include <linux/ioasid.h>
> +#include <linux/bitmap.h>
> #include <linux/perf_event.h>
> #include <uapi/linux/idxd.h>
> #include "registers.h"
> @@ -299,6 +300,7 @@ struct idxd_device {
> int rdbuf_limit;
> int nr_rdbufs; /* non-reserved read buffers */
> unsigned int wqcfg_size;
> + unsigned long *wq_enable_map;
>
> union sw_err_reg sw_err;
> wait_queue_head_t cmd_waitq;
> diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
> index aa3478257ddb..7e27e69ff741 100644
> --- a/drivers/dma/idxd/init.c
> +++ b/drivers/dma/idxd/init.c
> @@ -151,6 +151,12 @@ static int idxd_setup_wqs(struct idxd_device *idxd)
> if (!idxd->wqs)
> return -ENOMEM;
>
> + idxd->wq_enable_map = bitmap_zalloc_node(idxd->max_wqs, GFP_KERNEL, dev_to_node(dev));
> + if (!idxd->wq_enable_map) {
> + kfree(idxd->wqs);
> + return -ENOMEM;
> + }
> +
> for (i = 0; i < idxd->max_wqs; i++) {
> wq = kzalloc_node(sizeof(*wq), GFP_KERNEL, dev_to_node(dev));
> if (!wq) {
> diff --git a/drivers/dma/idxd/irq.c b/drivers/dma/idxd/irq.c
> index 743ead5ebc57..8efaf137fc65 100644
> --- a/drivers/dma/idxd/irq.c
> +++ b/drivers/dma/idxd/irq.c
> @@ -49,9 +49,9 @@ static void idxd_device_reinit(struct work_struct *work)
> goto out;
>
> for (i = 0; i < idxd->max_wqs; i++) {
> - struct idxd_wq *wq = idxd->wqs[i];
> + if (test_bit(i, idxd->wq_enable_map)) {
> + struct idxd_wq *wq = idxd->wqs[i];
>
> - if (wq->state == IDXD_WQ_ENABLED) {
> rc = idxd_wq_enable(wq);
> if (rc < 0) {
> dev_warn(dev, "Unable to re-enable wq %s\n",
Hi Dave and Fenghua,
Thinking about this last night, this should probably clear the bit here in
the case where an error is returned from idxd_wq_enable here, yes? I can
send a v2.
> diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
> index 3f262a57441b..3325b16ed959 100644
> --- a/drivers/dma/idxd/sysfs.c
> +++ b/drivers/dma/idxd/sysfs.c
> @@ -1405,6 +1405,7 @@ static void idxd_conf_device_release(struct device *dev)
> struct idxd_device *idxd = confdev_to_idxd(dev);
>
> kfree(idxd->groups);
> + bitmap_free(idxd->wq_enable_map);
> kfree(idxd->wqs);
> kfree(idxd->engines);
> ida_free(&idxd_ida, idxd->id);
> --
> 2.37.2
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] dmaengine: idxd: track enabled workqueues in bitmap
2022-09-28 15:21 ` Jerry Snitselaar
@ 2022-09-28 15:38 ` Dave Jiang
0 siblings, 0 replies; 6+ messages in thread
From: Dave Jiang @ 2022-09-28 15:38 UTC (permalink / raw)
To: Jerry Snitselaar, linux-kernel, dmaengine; +Cc: Fenghua Yu, Vinod Koul
On 9/28/2022 8:21 AM, Jerry Snitselaar wrote:
> On Mon, Sep 19, 2022 at 02:55:53PM -0700, Jerry Snitselaar wrote:
>> Now that idxd_wq_disable_cleanup() sets the workqueue state to
>> IDXD_WQ_DISABLED, use a bitmap to track which workqueues have been
>> enabled. This will then be used to determine which workqueues
>> should be re-enabled when attempting a software reset to recover
>> from a device halt state.
>>
>> Cc: Fenghua Yu <fenghua.yu@intel.com>
>> Cc: Dave Jiang <dave.jiang@intel.com>
>> Cc: Vinod Koul <vkoul@kernel.org>
>> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
>> ---
>> drivers/dma/idxd/device.c | 2 ++
>> drivers/dma/idxd/idxd.h | 2 ++
>> drivers/dma/idxd/init.c | 6 ++++++
>> drivers/dma/idxd/irq.c | 4 ++--
>> drivers/dma/idxd/sysfs.c | 1 +
>> 5 files changed, 13 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
>> index 31911e255ac1..f0c7d6d348e3 100644
>> --- a/drivers/dma/idxd/device.c
>> +++ b/drivers/dma/idxd/device.c
>> @@ -196,6 +196,7 @@ int idxd_wq_enable(struct idxd_wq *wq)
>> }
>>
>> wq->state = IDXD_WQ_ENABLED;
>> + set_bit(wq->id, idxd->wq_enable_map);
>> dev_dbg(dev, "WQ %d enabled\n", wq->id);
>> return 0;
>> }
>> @@ -223,6 +224,7 @@ int idxd_wq_disable(struct idxd_wq *wq, bool reset_config)
>>
>> if (reset_config)
>> idxd_wq_disable_cleanup(wq);
>> + clear_bit(wq->id, idxd->wq_enable_map);
>> wq->state = IDXD_WQ_DISABLED;
>> dev_dbg(dev, "WQ %d disabled\n", wq->id);
>> return 0;
>> diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
>> index fed0dfc1eaa8..f527a7f88b92 100644
>> --- a/drivers/dma/idxd/idxd.h
>> +++ b/drivers/dma/idxd/idxd.h
>> @@ -11,6 +11,7 @@
>> #include <linux/idr.h>
>> #include <linux/pci.h>
>> #include <linux/ioasid.h>
>> +#include <linux/bitmap.h>
>> #include <linux/perf_event.h>
>> #include <uapi/linux/idxd.h>
>> #include "registers.h"
>> @@ -299,6 +300,7 @@ struct idxd_device {
>> int rdbuf_limit;
>> int nr_rdbufs; /* non-reserved read buffers */
>> unsigned int wqcfg_size;
>> + unsigned long *wq_enable_map;
>>
>> union sw_err_reg sw_err;
>> wait_queue_head_t cmd_waitq;
>> diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
>> index aa3478257ddb..7e27e69ff741 100644
>> --- a/drivers/dma/idxd/init.c
>> +++ b/drivers/dma/idxd/init.c
>> @@ -151,6 +151,12 @@ static int idxd_setup_wqs(struct idxd_device *idxd)
>> if (!idxd->wqs)
>> return -ENOMEM;
>>
>> + idxd->wq_enable_map = bitmap_zalloc_node(idxd->max_wqs, GFP_KERNEL, dev_to_node(dev));
>> + if (!idxd->wq_enable_map) {
>> + kfree(idxd->wqs);
>> + return -ENOMEM;
>> + }
>> +
>> for (i = 0; i < idxd->max_wqs; i++) {
>> wq = kzalloc_node(sizeof(*wq), GFP_KERNEL, dev_to_node(dev));
>> if (!wq) {
>> diff --git a/drivers/dma/idxd/irq.c b/drivers/dma/idxd/irq.c
>> index 743ead5ebc57..8efaf137fc65 100644
>> --- a/drivers/dma/idxd/irq.c
>> +++ b/drivers/dma/idxd/irq.c
>> @@ -49,9 +49,9 @@ static void idxd_device_reinit(struct work_struct *work)
>> goto out;
>>
>> for (i = 0; i < idxd->max_wqs; i++) {
>> - struct idxd_wq *wq = idxd->wqs[i];
>> + if (test_bit(i, idxd->wq_enable_map)) {
>> + struct idxd_wq *wq = idxd->wqs[i];
>>
>> - if (wq->state == IDXD_WQ_ENABLED) {
>> rc = idxd_wq_enable(wq);
>> if (rc < 0) {
>> dev_warn(dev, "Unable to re-enable wq %s\n",
> Hi Dave and Fenghua,
>
> Thinking about this last night, this should probably clear the bit here in
> the case where an error is returned from idxd_wq_enable here, yes? I can
> send a v2.
Ah yeah I think so. We failed to enable, so just give up. Thanks.
>
>> diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
>> index 3f262a57441b..3325b16ed959 100644
>> --- a/drivers/dma/idxd/sysfs.c
>> +++ b/drivers/dma/idxd/sysfs.c
>> @@ -1405,6 +1405,7 @@ static void idxd_conf_device_release(struct device *dev)
>> struct idxd_device *idxd = confdev_to_idxd(dev);
>>
>> kfree(idxd->groups);
>> + bitmap_free(idxd->wq_enable_map);
>> kfree(idxd->wqs);
>> kfree(idxd->engines);
>> ida_free(&idxd_ida, idxd->id);
>> --
>> 2.37.2
>>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-09-28 15:38 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-19 21:55 [PATCH 0/2] dmaengine: idxd: Fix up re-enabling device workqueues Jerry Snitselaar
2022-09-19 21:55 ` [PATCH 1/2] dmaengine: idxd: Set wq state to disabled in idxd_wq_disable_cleanup() Jerry Snitselaar
2022-09-19 21:55 ` [PATCH 2/2] dmaengine: idxd: track enabled workqueues in bitmap Jerry Snitselaar
2022-09-28 15:21 ` Jerry Snitselaar
2022-09-28 15:38 ` Dave Jiang
2022-09-19 22:07 ` [PATCH 0/2] dmaengine: idxd: Fix up re-enabling device workqueues Dave Jiang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.