All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Alejandro Jimenez <alejandro.j.jimenez@oracle.com>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	Li RongQing <lirongqing@baidu.com>
Subject: [PATCH v3 25/28] KVM: SVM: Require logical ID to be power-of-2 for AVIC entry
Date: Tue, 20 Sep 2022 23:31:31 +0000	[thread overview]
Message-ID: <20220920233134.940511-26-seanjc@google.com> (raw)
In-Reply-To: <20220920233134.940511-1-seanjc@google.com>

Do not modify AVIC's logical ID table if the logical ID portion of the
LDR is not a power-of-2, i.e. if the LDR has multiple bits set.  Taking
only the first bit means that KVM will fail to match MDAs that intersect
with "higher" bits in the "ID"

The "ID" acts as a bitmap, but is referred to as an ID because theres an
implicit, unenforced "requirement" that software only set one bit.  This
edge case is arguably out-of-spec behavior, but KVM cleanly handles it
in all other cases, e.g. the optimized logical map (and AVIC!) is also
disabled in this scenario.

Refactor the code to consolidate the checks, and so that the code looks
more like avic_kick_target_vcpus_fast().

Fixes: 18f40c53e10f ("svm: Add VMEXIT handlers for AVIC")
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/kvm/svm/avic.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 4b6fc9d64f4d..a9e4e09f83fc 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -513,26 +513,26 @@ unsigned long avic_vcpu_get_apicv_inhibit_reasons(struct kvm_vcpu *vcpu)
 static u32 *avic_get_logical_id_entry(struct kvm_vcpu *vcpu, u32 ldr, bool flat)
 {
 	struct kvm_svm *kvm_svm = to_kvm_svm(vcpu->kvm);
-	int index;
 	u32 *logical_apic_id_table;
-	int dlid = GET_APIC_LOGICAL_ID(ldr);
+	u32 cluster, index;
 
-	if (!dlid)
-		return NULL;
+	ldr = GET_APIC_LOGICAL_ID(ldr);
 
-	if (flat) { /* flat */
-		index = ffs(dlid) - 1;
-		if (index > 7)
+	if (flat) {
+		cluster = 0;
+	} else {
+		cluster = (ldr >> 4) << 2;
+		if (cluster >= 0xf)
 			return NULL;
-	} else { /* cluster */
-		int cluster = (dlid & 0xf0) >> 4;
-		int apic = ffs(dlid & 0x0f) - 1;
-
-		if ((apic < 0) || (apic > 7) ||
-		    (cluster >= 0xf))
-			return NULL;
-		index = (cluster << 2) + apic;
+		ldr &= 0xf;
 	}
+	if (!ldr || !is_power_of_2(ldr))
+		return NULL;
+
+	index = __ffs(ldr);
+	if (WARN_ON_ONCE(index > 7))
+		return NULL;
+	index += (cluster << 2);
 
 	logical_apic_id_table = (u32 *) page_address(kvm_svm->avic_logical_id_table_page);
 
-- 
2.37.3.968.ga6b4b080e4-goog


  parent reply	other threads:[~2022-09-20 23:34 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-20 23:31 [PATCH v3 00/28] KVM: x86: AVIC and local APIC fixes+cleanups Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 01/28] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 02/28] KVM: x86: Purge "highest ISR" cache when updating APICv state Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 03/28] KVM: SVM: Flush the "current" TLB when activating AVIC Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 04/28] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 05/28] KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Sean Christopherson
2022-09-28  3:15   ` Alejandro Jimenez
2022-09-28  5:55     ` Maxim Levitsky
2022-09-28 16:51       ` Sean Christopherson
2022-09-28 17:51         ` Maxim Levitsky
2022-09-28 18:03           ` Sean Christopherson
2022-09-28 18:16             ` Maxim Levitsky
2022-09-28 20:44               ` Sean Christopherson
2022-09-28 20:50         ` Alejandro Jimenez
2022-09-20 23:31 ` [PATCH v3 06/28] KVM: x86: Move APIC access page helper to common x86 code Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 07/28] KVM: x86: Inhibit APIC memslot if x2APIC and AVIC are enabled Sean Christopherson
2022-09-23 10:27   ` Maxim Levitsky
2022-09-26 17:00     ` Sean Christopherson
2022-09-28  6:21       ` Maxim Levitsky
2022-09-28 16:33         ` Sean Christopherson
2022-09-28 17:40           ` Maxim Levitsky
2022-09-28 22:35             ` Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 08/28] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 09/28] KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" boolean Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 10/28] KVM: SVM: Compute dest based on sender's x2APIC status for AVIC kick Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 11/28] KVM: SVM: Fix x2APIC Logical ID calculation for avic_kick_target_vcpus_fast Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 12/28] Revert "KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible" Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 13/28] KVM: SVM: Document that vCPU ID == APIC ID in AVIC kick fastpatch Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 14/28] KVM: SVM: Add helper to perform final AVIC "kick" of single vCPU Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 15/28] KVM: x86: Explicitly skip optimized logical map setup if vCPU's LDR==0 Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 16/28] KVM: x86: Explicitly track all possibilities for APIC map's logical modes Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 17/28] KVM: x86: Skip redundant x2APIC logical mode optimized cluster setup Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 18/28] KVM: x86: Disable APIC logical map if logical ID covers multiple MDAs Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 19/28] KVM: x86: Disable APIC logical map if vCPUs are aliased in logical mode Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 20/28] KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 21/28] KVM: x86: Inhibit APICv/AVIC if the optimized physical map is disabled Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 22/28] KVM: SVM: Inhibit AVIC if vCPUs are aliased in logical mode Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 23/28] KVM: SVM: Always update local APIC on writes to logical dest register Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 24/28] KVM: SVM: Update svm->ldr_reg cache even if LDR is "bad" Sean Christopherson
2022-09-20 23:31 ` Sean Christopherson [this message]
2022-09-20 23:31 ` [PATCH v3 26/28] KVM: SVM: Handle multiple logical targets in AVIC kick fastpath Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 27/28] KVM: SVM: Ignore writes to Remote Read Data on AVIC write traps Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 28/28] Revert "KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu" Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220920233134.940511-26-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=alejandro.j.jimenez@oracle.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lirongqing@baidu.com \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=suravee.suthikulpanit@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.