From: Alexander Stein <alexander.stein@ew.tq-group.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, Abel Vesa <abelvesa@kernel.org>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org> Cc: Alexander Stein <alexander.stein@ew.tq-group.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org Subject: [PATCH 2/2] clk: imx: imx8mq: Add hdmi phy 27m as proper hw clock Date: Tue, 27 Sep 2022 16:06:38 +0200 [thread overview] Message-ID: <20220927140638.2759111-2-alexander.stein@ew.tq-group.com> (raw) In-Reply-To: <20220927140638.2759111-1-alexander.stein@ew.tq-group.com> So it can be referenced by IMX8MQ_CLK_HDMI_PHY_27MHZ in device tree files. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- drivers/clk/imx/clk-imx8mq.c | 1 + include/dt-bindings/clock/imx8mq-clock.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c index 783f98b05441..7cecb964cf1f 100644 --- a/drivers/clk/imx/clk-imx8mq.c +++ b/drivers/clk/imx/clk-imx8mq.c @@ -305,6 +305,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev) hws[IMX8MQ_CLK_EXT2] = imx_obtain_fixed_clk_hw(np, "clk_ext2"); hws[IMX8MQ_CLK_EXT3] = imx_obtain_fixed_clk_hw(np, "clk_ext3"); hws[IMX8MQ_CLK_EXT4] = imx_obtain_fixed_clk_hw(np, "clk_ext4"); + hws[IMX8MQ_CLK_HDMI_PHY_27MHZ] = imx_obtain_fixed_clk_hw(np, "hdmi_phy_27m"); np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-anatop"); base = of_iomap(np, 0); diff --git a/include/dt-bindings/clock/imx8mq-clock.h b/include/dt-bindings/clock/imx8mq-clock.h index afa74d7ba100..6401cc836c31 100644 --- a/include/dt-bindings/clock/imx8mq-clock.h +++ b/include/dt-bindings/clock/imx8mq-clock.h @@ -425,7 +425,8 @@ #define IMX8MQ_CLK_MON_VIDEO_PLL2_DIV 300 #define IMX8MQ_CLK_MON_SEL 301 #define IMX8MQ_CLK_MON_CLK2_OUT 302 +#define IMX8MQ_CLK_HDMI_PHY_27MHZ 303 -#define IMX8MQ_CLK_END 303 +#define IMX8MQ_CLK_END 304 #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */ -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Alexander Stein <alexander.stein@ew.tq-group.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, Abel Vesa <abelvesa@kernel.org>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org> Cc: Alexander Stein <alexander.stein@ew.tq-group.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org Subject: [PATCH 2/2] clk: imx: imx8mq: Add hdmi phy 27m as proper hw clock Date: Tue, 27 Sep 2022 16:06:38 +0200 [thread overview] Message-ID: <20220927140638.2759111-2-alexander.stein@ew.tq-group.com> (raw) In-Reply-To: <20220927140638.2759111-1-alexander.stein@ew.tq-group.com> So it can be referenced by IMX8MQ_CLK_HDMI_PHY_27MHZ in device tree files. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- drivers/clk/imx/clk-imx8mq.c | 1 + include/dt-bindings/clock/imx8mq-clock.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c index 783f98b05441..7cecb964cf1f 100644 --- a/drivers/clk/imx/clk-imx8mq.c +++ b/drivers/clk/imx/clk-imx8mq.c @@ -305,6 +305,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev) hws[IMX8MQ_CLK_EXT2] = imx_obtain_fixed_clk_hw(np, "clk_ext2"); hws[IMX8MQ_CLK_EXT3] = imx_obtain_fixed_clk_hw(np, "clk_ext3"); hws[IMX8MQ_CLK_EXT4] = imx_obtain_fixed_clk_hw(np, "clk_ext4"); + hws[IMX8MQ_CLK_HDMI_PHY_27MHZ] = imx_obtain_fixed_clk_hw(np, "hdmi_phy_27m"); np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-anatop"); base = of_iomap(np, 0); diff --git a/include/dt-bindings/clock/imx8mq-clock.h b/include/dt-bindings/clock/imx8mq-clock.h index afa74d7ba100..6401cc836c31 100644 --- a/include/dt-bindings/clock/imx8mq-clock.h +++ b/include/dt-bindings/clock/imx8mq-clock.h @@ -425,7 +425,8 @@ #define IMX8MQ_CLK_MON_VIDEO_PLL2_DIV 300 #define IMX8MQ_CLK_MON_SEL 301 #define IMX8MQ_CLK_MON_CLK2_OUT 302 +#define IMX8MQ_CLK_HDMI_PHY_27MHZ 303 -#define IMX8MQ_CLK_END 303 +#define IMX8MQ_CLK_END 304 #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */ -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-27 14:06 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-27 14:06 [PATCH 1/2] arm64: dts: imx8mq: add hdmi phy 27m clock to clock-controller Alexander Stein 2022-09-27 14:06 ` Alexander Stein 2022-09-27 14:06 ` Alexander Stein [this message] 2022-09-27 14:06 ` [PATCH 2/2] clk: imx: imx8mq: Add hdmi phy 27m as proper hw clock Alexander Stein
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220927140638.2759111-2-alexander.stein@ew.tq-group.com \ --to=alexander.stein@ew.tq-group.com \ --cc=abelvesa@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-imx@nxp.com \ --cc=mturquette@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=sboyd@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.