[PATCH 00/26] FUSE BPF: A Stacked Filesystem Extension for FUSE

[PATCH 00/26] FUSE BPF: A Stacked Filesystem Extension for FUSE

[Daniel Rosenberg]

These patches extend FUSE to be able to act as a stacked filesystem. This
allows pure passthrough, where the fuse file system simply reflects the lower
filesystem, and also allows optional pre and post filtering in BPF and/or the
userspace daemon as needed. This can dramatically reduce or even eliminate
transitions to and from userspace.

Currently, we either set the backing file/bpf at mount time at the root level,
or at lookup time, via an optional block added at the end of the lookup return
call. The added lookup block contains an fd for the backing file/folder and bpf
if necessary, or a signal to clear or inherit the parent values. We're looking
into two options for extending this to mkdir/mknod/etc, as we currently only
support setting the backing to a pre-existing file, although naturally you can
create new ones. When we're doing a lookup for create, we could pass an
fd for the parent dir and the name of the backing file we're creating. This has
the benefit of avoiding an additional call to userspace, but requires hanging
on to some data in a negative dentry where there is no elegant place to store it.
Another option is adding the same block we added to lookup to the create type
op codes. This keeps that code more uniform, but means userspace must implement
that logic in more areas.

As is, the patches definitely need some work before they're ready. We still
need to go through and ensure we respect changed filter values/disallow changes
that don't make sense. We aren't currently calling mnt_want_write for the lower
calls where appropriate, and we don't have an override_creds layer either. We
also plan to add to our read/write iter filters to allow for more interesting
use cases. There are also probably some node id inconsistencies. For nodes that
will be completely passthrough, we give an id of 0.

For the BPF verification side, we have currently set things set up in the old
style, with a new bpf program type and helper functions. From LPC, my
understanding is that newer bpf additions are done in a new style, so I imagine
much of that will need to be redone as well, but hopefully these patches get
across what our needs there are.

For testing, we've provided the selftest code we have been using. We also have
a mode to run with no userspace daemon in a pure passthrough mode that I have
been running xfstests over to get some coverage on the backing operation code.
I had to modify mounts/unmounts to get that running, along with some other
small touch ups. The most notable failure I currently see there is in
generic/126, which I suspect is likely related to override_creds.


Alessio Balsini (1):
  fs: Generic function to convert iocb to rw flags

Daniel Rosenberg (25):
  bpf: verifier: Allow for multiple packets
  bpf: verifier: Allow single packet invalidation
  fuse-bpf: Update uapi for fuse-bpf
  fuse-bpf: Add BPF supporting functions
  bpf: Export bpf_prog_fops
  fuse-bpf: Prepare for fuse-bpf patch
  fuse: Add fuse-bpf, a stacked fs extension for FUSE
  fuse-bpf: Don't support export_operations
  fuse-bpf: Partially add mapping support
  fuse-bpf: Add lseek support
  fuse-bpf: Add support for fallocate
  fuse-bpf: Support file/dir open/close
  fuse-bpf: Support mknod/unlink/mkdir/rmdir
  fuse-bpf: Add support for read/write iter
  fuse-bpf: support FUSE_READDIR
  fuse-bpf: Add support for sync operations
  fuse-bpf: Add Rename support
  fuse-bpf: Add attr support
  fuse-bpf: Add support for FUSE_COPY_FILE_RANGE
  fuse-bpf: Add xattr support
  fuse-bpf: Add symlink/link support
  fuse-bpf: allow mounting with no userspace daemon
  fuse-bpf: Call bpf for pre/post filters
  fuse-bpf: Add userspace pre/post filters
  fuse-bpf: Add selftests

 fs/fuse/Kconfig                               |   10 +
 fs/fuse/Makefile                              |    1 +
 fs/fuse/backing.c                             | 2753 +++++++++++++++++
 fs/fuse/control.c                             |    2 +-
 fs/fuse/dev.c                                 |   33 +-
 fs/fuse/dir.c                                 |  443 ++-
 fs/fuse/file.c                                |  125 +-
 fs/fuse/fuse_i.h                              |  804 ++++-
 fs/fuse/inode.c                               |  292 +-
 fs/fuse/ioctl.c                               |    2 +-
 fs/fuse/readdir.c                             |   22 +
 fs/fuse/xattr.c                               |   36 +
 fs/overlayfs/file.c                           |   23 +-
 include/linux/bpf.h                           |    4 +
 include/linux/bpf_fuse.h                      |   64 +
 include/linux/bpf_types.h                     |    4 +
 include/linux/bpf_verifier.h                  |    5 +-
 include/linux/fs.h                            |    5 +
 include/uapi/linux/bpf.h                      |   33 +
 include/uapi/linux/fuse.h                     |   19 +-
 kernel/bpf/Makefile                           |    4 +
 kernel/bpf/bpf_fuse.c                         |  342 ++
 kernel/bpf/btf.c                              |    1 +
 kernel/bpf/core.c                             |    5 +
 kernel/bpf/syscall.c                          |    1 +
 kernel/bpf/verifier.c                         |  144 +-
 tools/include/uapi/linux/bpf.h                |   33 +
 tools/include/uapi/linux/fuse.h               | 1066 +++++++
 .../selftests/filesystems/fuse/.gitignore     |    2 +
 .../selftests/filesystems/fuse/Makefile       |   41 +
 .../testing/selftests/filesystems/fuse/OWNERS |    2 +
 .../selftests/filesystems/fuse/bpf_loader.c   |  798 +++++
 .../testing/selftests/filesystems/fuse/fd.txt |   21 +
 .../selftests/filesystems/fuse/fd_bpf.c       |  370 +++
 .../selftests/filesystems/fuse/fuse_daemon.c  |  294 ++
 .../selftests/filesystems/fuse/fuse_test.c    | 2147 +++++++++++++
 .../selftests/filesystems/fuse/test_bpf.c     |  800 +++++
 .../filesystems/fuse/test_framework.h         |  173 ++
 .../selftests/filesystems/fuse/test_fuse.h    |  328 ++
 39 files changed, 11017 insertions(+), 235 deletions(-)
 create mode 100644 fs/fuse/backing.c
 create mode 100644 include/linux/bpf_fuse.h
 create mode 100644 kernel/bpf/bpf_fuse.c
 create mode 100644 tools/include/uapi/linux/fuse.h
 create mode 100644 tools/testing/selftests/filesystems/fuse/.gitignore
 create mode 100644 tools/testing/selftests/filesystems/fuse/Makefile
 create mode 100644 tools/testing/selftests/filesystems/fuse/OWNERS
 create mode 100644 tools/testing/selftests/filesystems/fuse/bpf_loader.c
 create mode 100644 tools/testing/selftests/filesystems/fuse/fd.txt
 create mode 100644 tools/testing/selftests/filesystems/fuse/fd_bpf.c
 create mode 100644 tools/testing/selftests/filesystems/fuse/fuse_daemon.c
 create mode 100644 tools/testing/selftests/filesystems/fuse/fuse_test.c
 create mode 100644 tools/testing/selftests/filesystems/fuse/test_bpf.c
 create mode 100644 tools/testing/selftests/filesystems/fuse/test_framework.h
 create mode 100644 tools/testing/selftests/filesystems/fuse/test_fuse.h


base-commit: bf682942cd26ce9cd5e87f73ae099b383041e782
-- 
2.37.3.998.g577e59143f-goog

[PATCH 01/26] bpf: verifier: Allow for multiple packets

[Daniel Rosenberg]

This allows multiple PTR_TO_PACKETs for a single bpf program. Fuse bpf
uses this to handle the various input and output types it has.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 include/linux/bpf.h          |  1 +
 include/linux/bpf_verifier.h |  5 ++-
 kernel/bpf/verifier.c        | 60 +++++++++++++++++++++++-------------
 3 files changed, 43 insertions(+), 23 deletions(-)

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 20c26aed7896..07086e375487 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -633,6 +633,7 @@ struct bpf_insn_access_aux {
 			struct btf *btf;
 			u32 btf_id;
 		};
+		int data_id;
 	};
 	struct bpf_verifier_log *log; /* for verbose logs */
 };
diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h
index 2e3bad8640dc..feae965e08a4 100644
--- a/include/linux/bpf_verifier.h
+++ b/include/linux/bpf_verifier.h
@@ -50,7 +50,10 @@ struct bpf_reg_state {
 	s32 off;
 	union {
 		/* valid when type == PTR_TO_PACKET */
-		int range;
+		struct {
+			int range;
+			u32 data_id;
+		};
 
 		/* valid when type == CONST_PTR_TO_MAP | PTR_TO_MAP_VALUE |
 		 *   PTR_TO_MAP_VALUE_OR_NULL
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 3eadb14e090b..d28cb22d5ee5 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -3544,8 +3544,9 @@ static int __check_mem_access(struct bpf_verifier_env *env, int regno,
 	case PTR_TO_PACKET:
 	case PTR_TO_PACKET_META:
 	case PTR_TO_PACKET_END:
-		verbose(env, "invalid access to packet, off=%d size=%d, R%d(id=%d,off=%d,r=%d)\n",
-			off, size, regno, reg->id, off, mem_size);
+		verbose(env,
+			"invalid access to packet %d, off=%d size=%d, R%d(id=%d,off=%d,r=%d)\n",
+			reg->data_id, off, size, regno, reg->id, off, mem_size);
 		break;
 	case PTR_TO_MEM:
 	default:
@@ -3938,7 +3939,7 @@ static int check_packet_access(struct bpf_verifier_env *env, u32 regno, int off,
 /* check access to 'struct bpf_context' fields.  Supports fixed offsets only */
 static int check_ctx_access(struct bpf_verifier_env *env, int insn_idx, int off, int size,
 			    enum bpf_access_type t, enum bpf_reg_type *reg_type,
-			    struct btf **btf, u32 *btf_id)
+			    struct btf **btf, u32 *btf_id, u32 *data_id)
 {
 	struct bpf_insn_access_aux info = {
 		.reg_type = *reg_type,
@@ -3959,6 +3960,8 @@ static int check_ctx_access(struct bpf_verifier_env *env, int insn_idx, int off,
 		if (base_type(*reg_type) == PTR_TO_BTF_ID) {
 			*btf = info.btf;
 			*btf_id = info.btf_id;
+		} else if (*reg_type == PTR_TO_PACKET || *reg_type == PTR_TO_PACKET_END) {
+			*data_id = info.data_id;
 		} else {
 			env->insn_aux_data[insn_idx].ctx_field_size = info.ctx_field_size;
 		}
@@ -4788,6 +4791,7 @@ static int check_mem_access(struct bpf_verifier_env *env, int insn_idx, u32 regn
 		enum bpf_reg_type reg_type = SCALAR_VALUE;
 		struct btf *btf = NULL;
 		u32 btf_id = 0;
+		u32 data_id = 0;
 
 		if (t == BPF_WRITE && value_regno >= 0 &&
 		    is_pointer_value(env, value_regno)) {
@@ -4800,7 +4804,7 @@ static int check_mem_access(struct bpf_verifier_env *env, int insn_idx, u32 regn
 			return err;
 
 		err = check_ctx_access(env, insn_idx, off, size, t, &reg_type, &btf,
-				       &btf_id);
+				       &btf_id, &data_id);
 		if (err)
 			verbose_linfo(env, insn_idx, "; ");
 		if (!err && t == BPF_READ && value_regno >= 0) {
@@ -4824,6 +4828,10 @@ static int check_mem_access(struct bpf_verifier_env *env, int insn_idx, u32 regn
 				if (base_type(reg_type) == PTR_TO_BTF_ID) {
 					regs[value_regno].btf = btf;
 					regs[value_regno].btf_id = btf_id;
+				} else if (reg_type == PTR_TO_PACKET ||
+				    reg_type == PTR_TO_PACKET_END ||
+				    reg_type == PTR_TO_PACKET_META) {
+					regs[value_regno].data_id = data_id;
 				}
 			}
 			regs[value_regno].type = reg_type;
@@ -9921,18 +9929,20 @@ static bool try_match_pkt_pointers(const struct bpf_insn *insn,
 
 	switch (BPF_OP(insn->code)) {
 	case BPF_JGT:
-		if ((dst_reg->type == PTR_TO_PACKET &&
+		if (dst_reg->data_id == src_reg->data_id &&
+		    ((dst_reg->type == PTR_TO_PACKET &&
 		     src_reg->type == PTR_TO_PACKET_END) ||
 		    (dst_reg->type == PTR_TO_PACKET_META &&
-		     reg_is_init_pkt_pointer(src_reg, PTR_TO_PACKET))) {
+		     reg_is_init_pkt_pointer(src_reg, PTR_TO_PACKET)))) {
 			/* pkt_data' > pkt_end, pkt_meta' > pkt_data */
 			find_good_pkt_pointers(this_branch, dst_reg,
 					       dst_reg->type, false);
 			mark_pkt_end(other_branch, insn->dst_reg, true);
-		} else if ((dst_reg->type == PTR_TO_PACKET_END &&
+		} else if (dst_reg->data_id == src_reg->data_id &&
+			   ((dst_reg->type == PTR_TO_PACKET_END &&
 			    src_reg->type == PTR_TO_PACKET) ||
 			   (reg_is_init_pkt_pointer(dst_reg, PTR_TO_PACKET) &&
-			    src_reg->type == PTR_TO_PACKET_META)) {
+			    src_reg->type == PTR_TO_PACKET_META))) {
 			/* pkt_end > pkt_data', pkt_data > pkt_meta' */
 			find_good_pkt_pointers(other_branch, src_reg,
 					       src_reg->type, true);
@@ -9942,18 +9952,20 @@ static bool try_match_pkt_pointers(const struct bpf_insn *insn,
 		}
 		break;
 	case BPF_JLT:
-		if ((dst_reg->type == PTR_TO_PACKET &&
-		     src_reg->type == PTR_TO_PACKET_END) ||
+		if (dst_reg->data_id == src_reg->data_id &&
+		    ((dst_reg->type == PTR_TO_PACKET &&
+		     src_reg->type == PTR_TO_PACKET_END && dst_reg->data_id == src_reg->data_id) ||
 		    (dst_reg->type == PTR_TO_PACKET_META &&
-		     reg_is_init_pkt_pointer(src_reg, PTR_TO_PACKET))) {
+		     reg_is_init_pkt_pointer(src_reg, PTR_TO_PACKET)))) {
 			/* pkt_data' < pkt_end, pkt_meta' < pkt_data */
 			find_good_pkt_pointers(other_branch, dst_reg,
 					       dst_reg->type, true);
 			mark_pkt_end(this_branch, insn->dst_reg, false);
-		} else if ((dst_reg->type == PTR_TO_PACKET_END &&
+		} else if (dst_reg->data_id == src_reg->data_id &&
+			   ((dst_reg->type == PTR_TO_PACKET_END &&
 			    src_reg->type == PTR_TO_PACKET) ||
 			   (reg_is_init_pkt_pointer(dst_reg, PTR_TO_PACKET) &&
-			    src_reg->type == PTR_TO_PACKET_META)) {
+			    src_reg->type == PTR_TO_PACKET_META))) {
 			/* pkt_end < pkt_data', pkt_data > pkt_meta' */
 			find_good_pkt_pointers(this_branch, src_reg,
 					       src_reg->type, false);
@@ -9963,18 +9975,20 @@ static bool try_match_pkt_pointers(const struct bpf_insn *insn,
 		}
 		break;
 	case BPF_JGE:
-		if ((dst_reg->type == PTR_TO_PACKET &&
+		if (dst_reg->data_id == src_reg->data_id &&
+		    ((dst_reg->type == PTR_TO_PACKET &&
 		     src_reg->type == PTR_TO_PACKET_END) ||
 		    (dst_reg->type == PTR_TO_PACKET_META &&
-		     reg_is_init_pkt_pointer(src_reg, PTR_TO_PACKET))) {
+		     reg_is_init_pkt_pointer(src_reg, PTR_TO_PACKET)))) {
 			/* pkt_data' >= pkt_end, pkt_meta' >= pkt_data */
 			find_good_pkt_pointers(this_branch, dst_reg,
 					       dst_reg->type, true);
 			mark_pkt_end(other_branch, insn->dst_reg, false);
-		} else if ((dst_reg->type == PTR_TO_PACKET_END &&
+		} else if (dst_reg->data_id == src_reg->data_id &&
+			   ((dst_reg->type == PTR_TO_PACKET_END &&
 			    src_reg->type == PTR_TO_PACKET) ||
 			   (reg_is_init_pkt_pointer(dst_reg, PTR_TO_PACKET) &&
-			    src_reg->type == PTR_TO_PACKET_META)) {
+			    src_reg->type == PTR_TO_PACKET_META))) {
 			/* pkt_end >= pkt_data', pkt_data >= pkt_meta' */
 			find_good_pkt_pointers(other_branch, src_reg,
 					       src_reg->type, false);
@@ -9984,18 +9998,20 @@ static bool try_match_pkt_pointers(const struct bpf_insn *insn,
 		}
 		break;
 	case BPF_JLE:
-		if ((dst_reg->type == PTR_TO_PACKET &&
-		     src_reg->type == PTR_TO_PACKET_END) ||
+		if (dst_reg->data_id == src_reg->data_id &&
+		    ((dst_reg->type == PTR_TO_PACKET &&
+		     src_reg->type == PTR_TO_PACKET_END && dst_reg->data_id == src_reg->data_id) ||
 		    (dst_reg->type == PTR_TO_PACKET_META &&
-		     reg_is_init_pkt_pointer(src_reg, PTR_TO_PACKET))) {
+		     reg_is_init_pkt_pointer(src_reg, PTR_TO_PACKET)))) {
 			/* pkt_data' <= pkt_end, pkt_meta' <= pkt_data */
 			find_good_pkt_pointers(other_branch, dst_reg,
 					       dst_reg->type, false);
 			mark_pkt_end(this_branch, insn->dst_reg, true);
-		} else if ((dst_reg->type == PTR_TO_PACKET_END &&
+		} else if (dst_reg->data_id == src_reg->data_id &&
+			   ((dst_reg->type == PTR_TO_PACKET_END &&
 			    src_reg->type == PTR_TO_PACKET) ||
 			   (reg_is_init_pkt_pointer(dst_reg, PTR_TO_PACKET) &&
-			    src_reg->type == PTR_TO_PACKET_META)) {
+			    src_reg->type == PTR_TO_PACKET_META))) {
 			/* pkt_end <= pkt_data', pkt_data <= pkt_meta' */
 			find_good_pkt_pointers(this_branch, src_reg,
 					       src_reg->type, true);
-- 
2.37.3.998.g577e59143f-goog

[PATCH 02/26] bpf: verifier: Allow single packet invalidation

[Daniel Rosenberg]

Previously there could only be one packet. Helper functions that may
modify the packet could simply invalidate all packets. Now that we
support multiple packets, we should allow helpers to invalidate specific
packets.

This is leaving the default global invalidation in place in case that's
still useful. All existing packets use the default id of '0', and could
be transitioned to the specific packet code with no change in behavior.

This also adds ARG_PTR_TO_PACKET, to allow packets to be passed to
helper functions at all. This is required to inform the verifier which
packets should be invalidated. Currenly only one packet is allowed per
helper.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 include/linux/bpf.h      |  1 +
 include/linux/bpf_fuse.h | 11 ++++++
 kernel/bpf/core.c        |  5 +++
 kernel/bpf/verifier.c    | 83 +++++++++++++++++++++++++++++++++++++++-
 4 files changed, 98 insertions(+), 2 deletions(-)
 create mode 100644 include/linux/bpf_fuse.h

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 07086e375487..4e6bfcfd8fea 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -456,6 +456,7 @@ enum bpf_arg_type {
 	ARG_PTR_TO_TIMER,	/* pointer to bpf_timer */
 	ARG_PTR_TO_KPTR,	/* pointer to referenced kptr */
 	ARG_PTR_TO_DYNPTR,      /* pointer to bpf_dynptr. See bpf_type_flag for dynptr type */
+	ARG_PTR_TO_PACKET,	/* pointer to packet */
 	__BPF_ARG_TYPE_MAX,
 
 	/* Extended arg_types. */
diff --git a/include/linux/bpf_fuse.h b/include/linux/bpf_fuse.h
new file mode 100644
index 000000000000..18e2ec5bf453
--- /dev/null
+++ b/include/linux/bpf_fuse.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2022 Google LLC.
+ */
+
+#ifndef _BPF_FUSE_H
+#define _BPF_FUSE_H
+
+bool bpf_helper_changes_one_pkt_data(void *func);
+
+#endif /* _BPF_FUSE_H */
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 3d9eb3ae334c..2ac3597ec932 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -2685,6 +2685,11 @@ bool __weak bpf_helper_changes_pkt_data(void *func)
 	return false;
 }
 
+bool __weak bpf_helper_changes_one_pkt_data(void *func)
+{
+	return false;
+}
+
 /* Return TRUE if the JIT backend wants verifier to enable sub-register usage
  * analysis code and wants explicit zero extension inserted by verifier.
  * Otherwise, return FALSE.
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index d28cb22d5ee5..2884650904fe 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -23,6 +23,7 @@
 #include <linux/error-injection.h>
 #include <linux/bpf_lsm.h>
 #include <linux/btf_ids.h>
+#include <linux/bpf_fuse.h>
 
 #include "disasm.h"
 
@@ -263,6 +264,7 @@ struct bpf_call_arg_meta {
 	u32 subprogno;
 	struct bpf_map_value_off_desc *kptr_off_desc;
 	u8 uninit_dynptr_regno;
+	u32 data_id;
 };
 
 struct btf *btf_vmlinux;
@@ -1396,6 +1398,12 @@ static bool reg_is_pkt_pointer_any(const struct bpf_reg_state *reg)
 	       reg->type == PTR_TO_PACKET_END;
 }
 
+static bool reg_is_specific_pkt_pointer_any(const struct bpf_reg_state *reg, u32 id)
+{
+	return (reg_is_pkt_pointer(reg) ||
+	       reg->type == PTR_TO_PACKET_END) && reg->data_id == id;
+}
+
 /* Unmodified PTR_TO_PACKET[_META,_END] register from ctx access. */
 static bool reg_is_init_pkt_pointer(const struct bpf_reg_state *reg,
 				    enum bpf_reg_type which)
@@ -5664,6 +5672,7 @@ static const struct bpf_reg_types stack_ptr_types = { .types = { PTR_TO_STACK }
 static const struct bpf_reg_types const_str_ptr_types = { .types = { PTR_TO_MAP_VALUE } };
 static const struct bpf_reg_types timer_types = { .types = { PTR_TO_MAP_VALUE } };
 static const struct bpf_reg_types kptr_types = { .types = { PTR_TO_MAP_VALUE } };
+static const struct bpf_reg_types packet_ptr_types = { .types = { PTR_TO_PACKET } };
 
 static const struct bpf_reg_types *compatible_reg_types[__BPF_ARG_TYPE_MAX] = {
 	[ARG_PTR_TO_MAP_KEY]		= &map_key_value_types,
@@ -5691,6 +5700,7 @@ static const struct bpf_reg_types *compatible_reg_types[__BPF_ARG_TYPE_MAX] = {
 	[ARG_PTR_TO_TIMER]		= &timer_types,
 	[ARG_PTR_TO_KPTR]		= &kptr_types,
 	[ARG_PTR_TO_DYNPTR]		= &stack_ptr_types,
+	[ARG_PTR_TO_PACKET]		= &packet_ptr_types,
 };
 
 static int check_reg_type(struct bpf_verifier_env *env, u32 regno,
@@ -5800,7 +5810,8 @@ int check_func_arg_reg_off(struct bpf_verifier_env *env,
 		/* Some of the argument types nevertheless require a
 		 * zero register offset.
 		 */
-		if (base_type(arg_type) != ARG_PTR_TO_ALLOC_MEM)
+		if (base_type(arg_type) != ARG_PTR_TO_ALLOC_MEM &&
+			base_type(arg_type) != ARG_PTR_TO_PACKET)
 			return 0;
 		break;
 	/* All the rest must be rejected, except PTR_TO_BTF_ID which allows
@@ -6135,6 +6146,9 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
 		if (process_kptr_func(env, regno, meta))
 			return -EACCES;
 		break;
+	case ARG_PTR_TO_PACKET:
+		meta->data_id = reg->data_id;
+		break;
 	}
 
 	return err;
@@ -6509,13 +6523,36 @@ static bool check_btf_id_ok(const struct bpf_func_proto *fn)
 	return true;
 }
 
+static bool check_packet_ok(const struct bpf_func_proto *fn)
+{
+	int count = 0;
+
+	if (fn->arg1_type == ARG_PTR_TO_PACKET)
+		count++;
+	if (fn->arg2_type == ARG_PTR_TO_PACKET)
+		count++;
+	if (fn->arg3_type == ARG_PTR_TO_PACKET)
+		count++;
+	if (fn->arg4_type == ARG_PTR_TO_PACKET)
+		count++;
+	if (fn->arg5_type == ARG_PTR_TO_PACKET)
+		count++;
+
+	/* We only support one arg being a packet at the moment,
+	 * which is sufficient for the helper functions we have right now.
+	 */
+	return count <= 1;
+}
+
+
 static int check_func_proto(const struct bpf_func_proto *fn, int func_id,
 			    struct bpf_call_arg_meta *meta)
 {
 	return check_raw_mode_ok(fn) &&
 	       check_arg_pair_ok(fn) &&
 	       check_btf_id_ok(fn) &&
-	       check_refcount_ok(fn, func_id) ? 0 : -EINVAL;
+	       check_refcount_ok(fn, func_id) &&
+	       check_packet_ok(fn) ? 0 : -EINVAL;
 }
 
 /* Packet data might have moved, any old PTR_TO_PACKET[_META,_END]
@@ -6539,6 +6576,25 @@ static void __clear_all_pkt_pointers(struct bpf_verifier_env *env,
 	}
 }
 
+static void __clear_specific_pkt_pointers(struct bpf_verifier_env *env,
+				     struct bpf_func_state *state,
+				     u32 data_id)
+{
+	struct bpf_reg_state *regs = state->regs, *reg;
+	int i;
+
+	for (i = 0; i < MAX_BPF_REG; i++)
+		if (reg_is_specific_pkt_pointer_any(&regs[i], data_id))
+			mark_reg_unknown(env, regs, i);
+
+	bpf_for_each_spilled_reg(i, state, reg) {
+		if (!reg)
+			continue;
+		if (reg_is_specific_pkt_pointer_any(reg, data_id))
+			__mark_reg_unknown(env, reg);
+	}
+}
+
 static void clear_all_pkt_pointers(struct bpf_verifier_env *env)
 {
 	struct bpf_verifier_state *vstate = env->cur_state;
@@ -6548,6 +6604,15 @@ static void clear_all_pkt_pointers(struct bpf_verifier_env *env)
 		__clear_all_pkt_pointers(env, vstate->frame[i]);
 }
 
+static void clear_specific_pkt_pointers(struct bpf_verifier_env *env, u32 data_id)
+{
+	struct bpf_verifier_state *vstate = env->cur_state;
+	int i;
+
+	for (i = 0; i <= vstate->curframe; i++)
+		__clear_specific_pkt_pointers(env, vstate->frame[i], data_id);
+}
+
 enum {
 	AT_PKT_END = -1,
 	BEYOND_PKT_END = -2,
@@ -7187,6 +7252,7 @@ static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn
 	struct bpf_call_arg_meta meta;
 	int insn_idx = *insn_idx_p;
 	bool changes_data;
+	bool changes_specific_data;
 	int i, err, func_id;
 
 	/* find function prototype */
@@ -7224,6 +7290,17 @@ static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn
 		return -EINVAL;
 	}
 
+	changes_specific_data = bpf_helper_changes_one_pkt_data(fn->func);
+	if (changes_data && fn->arg1_type != ARG_PTR_TO_PACKET &&
+			    fn->arg2_type != ARG_PTR_TO_PACKET &&
+			    fn->arg3_type != ARG_PTR_TO_PACKET &&
+			    fn->arg4_type != ARG_PTR_TO_PACKET &&
+			    fn->arg5_type != ARG_PTR_TO_PACKET) {
+		verbose(env, "kernel subsystem misconfigured func %s#%d: no packet arg\n",
+			func_id_name(func_id), func_id);
+		return -EINVAL;
+	}
+
 	memset(&meta, 0, sizeof(meta));
 	meta.pkt_access = fn->pkt_access;
 
@@ -7534,6 +7611,8 @@ static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn
 
 	if (changes_data)
 		clear_all_pkt_pointers(env);
+	if (changes_specific_data)
+		clear_specific_pkt_pointers(env, meta.data_id);
 	return 0;
 }
 
-- 
2.37.3.998.g577e59143f-goog

[PATCH 03/26] fuse-bpf: Update uapi for fuse-bpf

[Daniel Rosenberg]

This adds the bpf prog type for fuse-bpf, and the associated structures.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 include/linux/bpf_fuse.h  | 50 +++++++++++++++++++++++++++++++++++++++
 include/linux/bpf_types.h |  4 ++++
 include/uapi/linux/bpf.h  | 31 ++++++++++++++++++++++++
 include/uapi/linux/fuse.h | 13 +++++++++-
 4 files changed, 97 insertions(+), 1 deletion(-)

diff --git a/include/linux/bpf_fuse.h b/include/linux/bpf_fuse.h
index 18e2ec5bf453..9d22205c9ae0 100644
--- a/include/linux/bpf_fuse.h
+++ b/include/linux/bpf_fuse.h
@@ -6,6 +6,56 @@
 #ifndef _BPF_FUSE_H
 #define _BPF_FUSE_H
 
+/*
+ * Fuse BPF Args
+ *
+ * Used to communicate with bpf programs to allow checking or altering certain values.
+ * The end_offset allows the bpf verifier to check boundaries statically. This reflects
+ * the ends of the buffer. size shows the length that was actually used.
+ *
+ * In order to write to the output args, you must use the pointer returned by
+ * bpf_fuse_get_writeable.
+ *
+ */
+
+#define FUSE_MAX_ARGS_IN 3
+#define FUSE_MAX_ARGS_OUT 2
+
+struct bpf_fuse_arg {
+	void *value;		// Start of the buffer
+	void *end_offset;	// End of the buffer
+	uint32_t size;		// Used size of the buffer
+	uint32_t max_size;	// Max permitted size, if buffer is resizable. Otherwise 0
+	uint32_t flags;		// Flags indicating buffer status
+};
+
+#define FUSE_BPF_FORCE (1 << 0)
+#define FUSE_BPF_OUT_ARGVAR (1 << 6)
+
+struct bpf_fuse_args {
+	uint64_t nodeid;
+	uint32_t opcode;
+	uint32_t error_in;
+	uint32_t in_numargs;
+	uint32_t out_numargs;
+	uint32_t flags;
+	struct bpf_fuse_arg in_args[FUSE_MAX_ARGS_IN];
+	struct bpf_fuse_arg out_args[FUSE_MAX_ARGS_OUT];
+};
+
+/* These flags are used internally to track information about the fuse buffers.
+ * Fuse sets some of the flags in init. The helper functions sets others, depending on what
+ * was requested by the bpf program.
+ */
+// Flags set by FUSE
+#define BPF_FUSE_IMMUTABLE	(1 << 0) // Buffer may not be written to
+#define BPF_FUSE_VARIABLE_SIZE	(1 << 1) // Buffer length may be changed (growth requires alloc)
+#define BPF_FUSE_MUST_ALLOCATE	(1 << 2) // Buffer must be re allocated before allowing writes
+
+// Flags set by helper function
+#define BPF_FUSE_MODIFIED	(1 << 3) // The helper function allowed writes to the buffer
+#define BPF_FUSE_ALLOCATED	(1 << 4) // The helper function allocated the buffer
+
 bool bpf_helper_changes_one_pkt_data(void *func);
 
 #endif /* _BPF_FUSE_H */
diff --git a/include/linux/bpf_types.h b/include/linux/bpf_types.h
index 2b9112b80171..80c7f7d69794 100644
--- a/include/linux/bpf_types.h
+++ b/include/linux/bpf_types.h
@@ -79,6 +79,10 @@ BPF_PROG_TYPE(BPF_PROG_TYPE_LSM, lsm,
 #endif
 BPF_PROG_TYPE(BPF_PROG_TYPE_SYSCALL, bpf_syscall,
 	      void *, void *)
+#ifdef CONFIG_FUSE_BPF
+BPF_PROG_TYPE(BPF_PROG_TYPE_FUSE, fuse,
+	      struct __bpf_fuse_args, struct bpf_fuse_args)
+#endif
 
 BPF_MAP_TYPE(BPF_MAP_TYPE_ARRAY, array_map_ops)
 BPF_MAP_TYPE(BPF_MAP_TYPE_PERCPU_ARRAY, percpu_array_map_ops)
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 59a217ca2dfd..ac81763f002b 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -952,6 +952,7 @@ enum bpf_prog_type {
 	BPF_PROG_TYPE_LSM,
 	BPF_PROG_TYPE_SK_LOOKUP,
 	BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */
+	BPF_PROG_TYPE_FUSE,
 };
 
 enum bpf_attach_type {
@@ -6848,4 +6849,34 @@ struct bpf_core_relo {
 	enum bpf_core_relo_kind kind;
 };
 
+struct __bpf_fuse_arg {
+	__u64 value;
+	__u64 end_offset;
+	__u32 size;
+	__u32 max_size;
+};
+
+struct __bpf_fuse_args {
+	__u64 nodeid;
+	__u32 opcode;
+	__u32 error_in;
+	__u32 in_numargs;
+	__u32 out_numargs;
+	__u32 flags;
+	struct __bpf_fuse_arg in_args[3];
+	struct __bpf_fuse_arg out_args[2];
+};
+
+/* Return Codes for Fuse BPF programs */
+#define BPF_FUSE_CONTINUE		0
+#define BPF_FUSE_USER			1
+#define BPF_FUSE_USER_PREFILTER		2
+#define BPF_FUSE_POSTFILTER		3
+#define BPF_FUSE_USER_POSTFILTER	4
+
+/* Op Code Filter values for BPF Programs */
+#define FUSE_OPCODE_FILTER	0x0ffff
+#define FUSE_PREFILTER		0x10000
+#define FUSE_POSTFILTER		0x20000
+
 #endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h
index d6ccee961891..8c80c146e69b 100644
--- a/include/uapi/linux/fuse.h
+++ b/include/uapi/linux/fuse.h
@@ -572,6 +572,17 @@ struct fuse_entry_out {
 	struct fuse_attr attr;
 };
 
+#define FUSE_ACTION_KEEP	0
+#define FUSE_ACTION_REMOVE	1
+#define FUSE_ACTION_REPLACE	2
+
+struct fuse_entry_bpf_out {
+	uint64_t	backing_action;
+	uint64_t	backing_fd;
+	uint64_t	bpf_action;
+	uint64_t	bpf_fd;
+};
+
 struct fuse_forget_in {
 	uint64_t	nlookup;
 };
@@ -870,7 +881,7 @@ struct fuse_in_header {
 	uint32_t	uid;
 	uint32_t	gid;
 	uint32_t	pid;
-	uint32_t	padding;
+	uint32_t	error_in;
 };
 
 struct fuse_out_header {
-- 
2.37.3.998.g577e59143f-goog

[PATCH 04/26] fuse-bpf: Add BPF supporting functions

[Daniel Rosenberg]

This adds support for verifying fuse-bpf programs. These programs are
not permitted to make any changes to their contexts unless they request
the access via fuse_get_writeable_in/fuse_get_writeable_out. These
return a buffer, either to the preexisting buffer, or a newly allocated
one which will replace the preexisting buffer. The caller of the bpf
program is responsible for cleaning up these allocations, and is
notified via the flags set by the helper.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 include/linux/bpf.h      |   2 +
 include/linux/bpf_fuse.h |   1 +
 include/uapi/linux/bpf.h |   2 +
 kernel/bpf/Makefile      |   4 +
 kernel/bpf/bpf_fuse.c    | 342 +++++++++++++++++++++++++++++++++++++++
 kernel/bpf/btf.c         |   1 +
 kernel/bpf/verifier.c    |   1 +
 7 files changed, 353 insertions(+)
 create mode 100644 kernel/bpf/bpf_fuse.c

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 4e6bfcfd8fea..749e65c438dd 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -2412,6 +2412,8 @@ extern const struct bpf_func_proto bpf_loop_proto;
 extern const struct bpf_func_proto bpf_copy_from_user_task_proto;
 extern const struct bpf_func_proto bpf_set_retval_proto;
 extern const struct bpf_func_proto bpf_get_retval_proto;
+extern const struct bpf_func_proto bpf_fuse_get_writeable_in_proto;
+extern const struct bpf_func_proto bpf_fuse_get_writeable_out_proto;
 
 const struct bpf_func_proto *tracing_prog_func_proto(
   enum bpf_func_id func_id, const struct bpf_prog *prog);
diff --git a/include/linux/bpf_fuse.h b/include/linux/bpf_fuse.h
index 9d22205c9ae0..91b60d4e78b1 100644
--- a/include/linux/bpf_fuse.h
+++ b/include/linux/bpf_fuse.h
@@ -56,6 +56,7 @@ struct bpf_fuse_args {
 #define BPF_FUSE_MODIFIED	(1 << 3) // The helper function allowed writes to the buffer
 #define BPF_FUSE_ALLOCATED	(1 << 4) // The helper function allocated the buffer
 
+extern void *bpf_fuse_get_writeable(struct bpf_fuse_arg *arg, u64 size, bool copy);
 bool bpf_helper_changes_one_pkt_data(void *func);
 
 #endif /* _BPF_FUSE_H */
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index ac81763f002b..8218b9ea4313 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -5542,6 +5542,8 @@ union bpf_attr {
 	FN(tcp_raw_gen_syncookie_ipv6),	\
 	FN(tcp_raw_check_syncookie_ipv4),	\
 	FN(tcp_raw_check_syncookie_ipv6),	\
+	FN(fuse_get_writeable_in),	\
+	FN(fuse_get_writeable_out),	\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
diff --git a/kernel/bpf/Makefile b/kernel/bpf/Makefile
index 057ba8e01e70..717212bb8282 100644
--- a/kernel/bpf/Makefile
+++ b/kernel/bpf/Makefile
@@ -40,3 +40,7 @@ obj-$(CONFIG_BPF_PRELOAD) += preload/
 obj-$(CONFIG_BPF_SYSCALL) += relo_core.o
 $(obj)/relo_core.o: $(srctree)/tools/lib/bpf/relo_core.c FORCE
 	$(call if_changed_rule,cc_o_c)
+
+ifeq ($(CONFIG_FUSE_BPF),y)
+obj-$(CONFIG_BPF_SYSCALL) += bpf_fuse.o
+endif
diff --git a/kernel/bpf/bpf_fuse.c b/kernel/bpf/bpf_fuse.c
new file mode 100644
index 000000000000..cc5c9b7fc361
--- /dev/null
+++ b/kernel/bpf/bpf_fuse.c
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Google LLC
+
+#include <linux/filter.h>
+#include <linux/bpf_fuse.h>
+
+static const struct bpf_func_proto *
+fuse_prog_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
+{
+	switch (func_id) {
+	case BPF_FUNC_trace_printk:
+			return bpf_get_trace_printk_proto();
+
+	case BPF_FUNC_get_current_uid_gid:
+			return &bpf_get_current_uid_gid_proto;
+
+	case BPF_FUNC_get_current_pid_tgid:
+			return &bpf_get_current_pid_tgid_proto;
+
+	case BPF_FUNC_map_lookup_elem:
+		return &bpf_map_lookup_elem_proto;
+
+	case BPF_FUNC_map_update_elem:
+		return &bpf_map_update_elem_proto;
+
+	case BPF_FUNC_fuse_get_writeable_in:
+		return &bpf_fuse_get_writeable_in_proto;
+
+	case BPF_FUNC_fuse_get_writeable_out:
+		return &bpf_fuse_get_writeable_out_proto;
+
+	default:
+		pr_debug("Invalid fuse bpf func %d\n", func_id);
+		return NULL;
+	}
+}
+
+static bool fuse_arg_valid_access(int off, int start, int size, struct bpf_insn_access_aux *info)
+{
+	int arg_off = (off - start) % sizeof(struct __bpf_fuse_arg);
+	int arg_start = off - arg_off;
+
+	switch (arg_off) {
+	case bpf_ctx_range(struct __bpf_fuse_arg, value):
+	case offsetof(struct __bpf_fuse_arg, end_offset):
+		if (size != sizeof(__u64))
+			return false;
+		break;
+
+	case offsetof(struct __bpf_fuse_arg, max_size):
+	case offsetof(struct __bpf_fuse_arg, size):
+		if (size != sizeof(__u32))
+			return false;
+		break;
+
+	}
+
+	switch (arg_off) {
+	case bpf_ctx_range(struct __bpf_fuse_arg, value):
+		info->reg_type = PTR_TO_PACKET;
+		info->data_id = arg_start;
+		return true;
+
+	case offsetof(struct __bpf_fuse_arg, end_offset):
+		info->reg_type = PTR_TO_PACKET_END;
+		info->data_id = arg_start;
+		return true;
+
+	case offsetof(struct __bpf_fuse_arg, max_size):
+	case offsetof(struct __bpf_fuse_arg, size):
+		info->reg_type = SCALAR_VALUE;
+		return true;
+	}
+	return false;
+}
+
+static bool fuse_prog_is_valid_access(int off, int size,
+				enum bpf_access_type type,
+				const struct bpf_prog *prog,
+				struct bpf_insn_access_aux *info)
+{
+	if (off < 0 || off > offsetofend(struct bpf_fuse_args, out_args))
+		return false;
+
+	/* No fields should be written directly. Writable buffers are requested via helper function
+	 * The size fields is set by helper. If bpfs have a need to adjust the size smaller, we may
+	 * revisit this...
+	 */
+	if (type == BPF_WRITE)
+		return false;
+
+	switch (off) {
+	case bpf_ctx_range(struct __bpf_fuse_args, nodeid):
+		info->reg_type = SCALAR_VALUE;
+		if (size == sizeof(__u64))
+			return true;
+		break;
+	case bpf_ctx_range(struct __bpf_fuse_args, opcode):
+	case bpf_ctx_range(struct __bpf_fuse_args, error_in):
+	case bpf_ctx_range(struct __bpf_fuse_args, in_numargs):
+	case bpf_ctx_range(struct __bpf_fuse_args, out_numargs):
+	case bpf_ctx_range(struct __bpf_fuse_args, flags):
+		info->reg_type = SCALAR_VALUE;
+		if (size == sizeof(__u32))
+			return true;
+		break;
+	case bpf_ctx_range_till(struct __bpf_fuse_args, in_args[0], in_args[2]):
+		if (fuse_arg_valid_access(off, offsetof(struct __bpf_fuse_args, in_args[0]),
+					  size, info))
+			return true;
+		break;
+	case bpf_ctx_range_till(struct __bpf_fuse_args, out_args[0], out_args[1]):
+		if (fuse_arg_valid_access(off, offsetof(struct __bpf_fuse_args, out_args[0]),
+					  size, info))
+			return true;
+		break;
+	}
+
+	return false;
+}
+
+static struct bpf_insn *fuse_arg_convert_access(int off, int start, int converted_start,
+						const struct bpf_insn *si, struct bpf_insn *insn)
+{
+	int arg_off = (off - start) % sizeof(struct __bpf_fuse_arg);
+	int arg_num = (off - start) / sizeof(struct __bpf_fuse_arg);
+	int arg_start = converted_start + arg_num * sizeof(struct bpf_fuse_arg);
+
+	switch (arg_off) {
+	case offsetof(struct __bpf_fuse_arg, value):
+		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_fuse_arg, value),
+				      si->dst_reg, si->src_reg,
+				      arg_start + offsetof(struct bpf_fuse_arg, value));
+		break;
+
+	case offsetof(struct __bpf_fuse_arg, end_offset):
+		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_fuse_arg, end_offset),
+				      si->dst_reg, si->src_reg,
+				      arg_start + offsetof(struct bpf_fuse_arg, end_offset));
+		break;
+
+	case offsetof(struct __bpf_fuse_arg, size):
+		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_fuse_arg, size),
+				      si->dst_reg, si->src_reg,
+				      arg_start + offsetof(struct bpf_fuse_arg, size));
+		break;
+
+	case offsetof(struct __bpf_fuse_arg, max_size):
+		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_fuse_arg, max_size),
+				      si->dst_reg, si->src_reg,
+				      arg_start + offsetof(struct bpf_fuse_arg, max_size));
+		break;
+	}
+	return insn;
+}
+
+static u32 fuse_prog_convert_ctx_access(enum bpf_access_type type,
+		     const struct bpf_insn *si,
+		     struct bpf_insn *insn_buf,
+		     struct bpf_prog *prog,
+		     u32 *target_size)
+{
+	struct bpf_insn *insn = insn_buf;
+
+	switch (si->off) {
+	case offsetof(struct __bpf_fuse_args, nodeid):
+		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_fuse_args, nodeid),
+				      si->dst_reg, si->src_reg,
+				      offsetof(struct bpf_fuse_args, nodeid));
+		break;
+
+	case offsetof(struct __bpf_fuse_args, opcode):
+		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_fuse_args, opcode),
+				      si->dst_reg, si->src_reg,
+				      offsetof(struct bpf_fuse_args, opcode));
+		break;
+
+	case offsetof(struct __bpf_fuse_args, error_in):
+		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_fuse_args, error_in),
+				      si->dst_reg, si->src_reg,
+				      offsetof(struct bpf_fuse_args, error_in));
+		break;
+
+	case offsetof(struct __bpf_fuse_args, in_numargs):
+		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_fuse_args, in_numargs),
+				      si->dst_reg, si->src_reg,
+				      offsetof(struct bpf_fuse_args, in_numargs));
+		break;
+
+	case offsetof(struct __bpf_fuse_args, out_numargs):
+		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_fuse_args, out_numargs),
+				      si->dst_reg, si->src_reg,
+				      offsetof(struct bpf_fuse_args, out_numargs));
+		break;
+
+	case offsetof(struct __bpf_fuse_args, flags):
+		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_fuse_args, flags),
+				      si->dst_reg, si->src_reg,
+				      offsetof(struct bpf_fuse_args, flags));
+		break;
+
+	case bpf_ctx_range_till(struct __bpf_fuse_args, in_args[0], in_args[2]):
+		insn = fuse_arg_convert_access(si->off,
+					       offsetof(struct __bpf_fuse_args, in_args[0]),
+					       offsetof(struct bpf_fuse_args, in_args[0]),
+					       si, insn);
+		break;
+
+	case bpf_ctx_range_till(struct __bpf_fuse_args, out_args[0], out_args[1]):
+		insn = fuse_arg_convert_access(si->off,
+					       offsetof(struct __bpf_fuse_args, out_args[0]),
+					       offsetof(struct bpf_fuse_args, out_args[0]),
+					       si, insn);
+		break;
+
+	}
+
+	return insn - insn_buf;
+}
+
+static int fuse_prog_get_prologue(struct bpf_insn *insn_buf,
+				   bool direct_write,
+				   const struct bpf_prog *prog)
+{
+	return 0;
+}
+
+static int buff_size(struct bpf_fuse_arg *arg)
+{
+	return ((char *)arg->end_offset - (char *)arg->value);
+}
+
+void *bpf_fuse_get_writeable(struct bpf_fuse_arg *arg, u64 size, bool copy)
+{
+	void *writeable_val;
+
+	if (arg->flags & BPF_FUSE_IMMUTABLE)
+		return 0;
+
+	if (size <= buff_size(arg) &&
+			(!(arg->flags & BPF_FUSE_MUST_ALLOCATE) ||
+			  (arg->flags & BPF_FUSE_ALLOCATED))) {
+		if (arg->flags & BPF_FUSE_VARIABLE_SIZE)
+			arg->size = size;
+		arg->flags |= BPF_FUSE_MODIFIED;
+		return arg->value;
+	}
+	/* Variable sized arrays must stay below max size. If the buffer must be fixed size,
+	 * don't change the allocated size. Verifier will enforce requested size for accesses
+	 */
+	if (arg->flags & BPF_FUSE_VARIABLE_SIZE) {
+		if (size > arg->max_size)
+			return 0;
+	} else {
+		if (size > arg->size)
+			return 0;
+		size = arg->size;
+	}
+
+	if (size != arg->size && size > arg->max_size)
+		return 0;
+	writeable_val = kzalloc(size, GFP_KERNEL);
+	if (!writeable_val)
+		return 0;
+
+	/* If we're copying the buffer, assume the same amount is used. If that isn't the case,
+	 * caller must change size. Otherwise, assume entirety of new buffer is used.
+	 */
+	if (copy)
+		memcpy(writeable_val, arg->value, (arg->size > size) ? size : arg->size);
+	else
+		arg->size = size;
+
+	if (arg->flags & BPF_FUSE_ALLOCATED)
+		kfree(arg->value);
+	arg->value = writeable_val;
+	arg->end_offset = (char *)writeable_val + size;
+
+	arg->flags |= BPF_FUSE_ALLOCATED | BPF_FUSE_MODIFIED;
+
+	return arg->value;
+}
+EXPORT_SYMBOL(bpf_fuse_get_writeable);
+
+BPF_CALL_5(bpf_fuse_get_writeable_in, struct bpf_fuse_args *, ctx, u32, index, void *, value,
+		u64, size, bool, copy)
+{
+	if (ctx->in_args[index].value != value)
+		return 0;
+	return (unsigned long) bpf_fuse_get_writeable(&ctx->in_args[index], size, copy);
+}
+
+BPF_CALL_5(bpf_fuse_get_writeable_out, struct bpf_fuse_args *, ctx, u32, index, void *, value,
+		u64, size, bool, copy)
+{
+	if (ctx->out_args[index].value != value)
+		return 0;
+	return (unsigned long) bpf_fuse_get_writeable(&ctx->out_args[index], size, copy);
+}
+
+bool bpf_helper_changes_one_pkt_data(void *func)
+{
+	if (func == bpf_fuse_get_writeable_in || func == bpf_fuse_get_writeable_out)
+		return true;
+	return false;
+}
+
+const struct bpf_func_proto bpf_fuse_get_writeable_in_proto = {
+	.func		= bpf_fuse_get_writeable_in,
+	.ret_type	= RET_PTR_TO_ALLOC_MEM_OR_NULL,
+	.arg1_type	= ARG_PTR_TO_CTX,
+	.arg2_type	= ARG_ANYTHING,
+	.arg3_type	= ARG_PTR_TO_PACKET,
+	.arg4_type	= ARG_CONST_ALLOC_SIZE_OR_ZERO,
+	.arg5_type	= ARG_ANYTHING,
+	.gpl_only	= false,
+	.pkt_access	= true,
+};
+
+const struct bpf_func_proto bpf_fuse_get_writeable_out_proto = {
+	.func		= bpf_fuse_get_writeable_out,
+	.ret_type	= RET_PTR_TO_ALLOC_MEM_OR_NULL,
+	.arg1_type	= ARG_PTR_TO_CTX,
+	.arg2_type	= ARG_ANYTHING,
+	.arg3_type	= ARG_PTR_TO_PACKET,
+	.arg4_type	= ARG_CONST_ALLOC_SIZE_OR_ZERO,
+	.arg5_type	= ARG_ANYTHING,
+	.gpl_only	= false,
+	.pkt_access	= true,
+};
+
+
+const struct bpf_verifier_ops fuse_verifier_ops = {
+	.get_func_proto  = fuse_prog_func_proto,
+	.is_valid_access = fuse_prog_is_valid_access,
+	.convert_ctx_access = fuse_prog_convert_ctx_access,
+	.gen_prologue = fuse_prog_get_prologue,
+};
+
+const struct bpf_prog_ops fuse_prog_ops = {
+};
+
diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index 7e64447659f3..97f4a0889f2b 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -24,6 +24,7 @@
 #include <linux/bsearch.h>
 #include <linux/kobject.h>
 #include <linux/sysfs.h>
+#include <linux/bpf_fuse.h>
 #include <net/sock.h>
 #include "../tools/lib/bpf/relo_core.h"
 
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 2884650904fe..e076677f63be 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -3874,6 +3874,7 @@ static bool may_access_direct_pkt_data(struct bpf_verifier_env *env,
 	case BPF_PROG_TYPE_SK_REUSEPORT:
 	case BPF_PROG_TYPE_FLOW_DISSECTOR:
 	case BPF_PROG_TYPE_CGROUP_SKB:
+	case BPF_PROG_TYPE_FUSE:
 		if (t == BPF_WRITE)
 			return false;
 		fallthrough;
-- 
2.37.3.998.g577e59143f-goog

[PATCH 05/26] fs: Generic function to convert iocb to rw flags

[Daniel Rosenberg]

From: Alessio Balsini <balsini@google.com>

OverlayFS implements its own function to translate iocb flags into rw
flags, so that they can be passed into another vfs call.
With commit ce71bfea207b4 ("fs: align IOCB_* flags with RWF_* flags")
Jens created a 1:1 matching between the iocb flags and rw flags,
simplifying the conversion.

Reduce the OverlayFS code by making the flag conversion function generic
and reusable.

Signed-off-by: Alessio Balsini <balsini@android.com>
---
 fs/overlayfs/file.c | 23 +++++------------------
 include/linux/fs.h  |  5 +++++
 2 files changed, 10 insertions(+), 18 deletions(-)

diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c
index daff601b5c41..c9df01577052 100644
--- a/fs/overlayfs/file.c
+++ b/fs/overlayfs/file.c
@@ -15,6 +15,8 @@
 #include <linux/fs.h>
 #include "overlayfs.h"
 
+#define OVL_IOCB_MASK (IOCB_DSYNC | IOCB_HIPRI | IOCB_NOWAIT | IOCB_SYNC)
+
 struct ovl_aio_req {
 	struct kiocb iocb;
 	refcount_t ref;
@@ -240,22 +242,6 @@ static void ovl_file_accessed(struct file *file)
 	touch_atime(&file->f_path);
 }
 
-static rwf_t ovl_iocb_to_rwf(int ifl)
-{
-	rwf_t flags = 0;
-
-	if (ifl & IOCB_NOWAIT)
-		flags |= RWF_NOWAIT;
-	if (ifl & IOCB_HIPRI)
-		flags |= RWF_HIPRI;
-	if (ifl & IOCB_DSYNC)
-		flags |= RWF_DSYNC;
-	if (ifl & IOCB_SYNC)
-		flags |= RWF_SYNC;
-
-	return flags;
-}
-
 static inline void ovl_aio_put(struct ovl_aio_req *aio_req)
 {
 	if (refcount_dec_and_test(&aio_req->ref)) {
@@ -315,7 +301,8 @@ static ssize_t ovl_read_iter(struct kiocb *iocb, struct iov_iter *iter)
 	old_cred = ovl_override_creds(file_inode(file)->i_sb);
 	if (is_sync_kiocb(iocb)) {
 		ret = vfs_iter_read(real.file, iter, &iocb->ki_pos,
-				    ovl_iocb_to_rwf(iocb->ki_flags));
+				    iocb_to_rw_flags(iocb->ki_flags,
+						     OVL_IOCB_MASK));
 	} else {
 		struct ovl_aio_req *aio_req;
 
@@ -379,7 +366,7 @@ static ssize_t ovl_write_iter(struct kiocb *iocb, struct iov_iter *iter)
 	if (is_sync_kiocb(iocb)) {
 		file_start_write(real.file);
 		ret = vfs_iter_write(real.file, iter, &iocb->ki_pos,
-				     ovl_iocb_to_rwf(ifl));
+				     iocb_to_rw_flags(ifl, OVL_IOCB_MASK));
 		file_end_write(real.file);
 		/* Update size */
 		ovl_copyattr(inode);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 9eced4cc286e..c1d49675092e 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3420,6 +3420,11 @@ static inline int kiocb_set_rw_flags(struct kiocb *ki, rwf_t flags)
 	return 0;
 }
 
+static inline rwf_t iocb_to_rw_flags(int ifl, int iocb_mask)
+{
+	return ifl & iocb_mask;
+}
+
 static inline ino_t parent_ino(struct dentry *dentry)
 {
 	ino_t res;
-- 
2.37.3.998.g577e59143f-goog

[PATCH 06/26] bpf: Export bpf_prog_fops

[Daniel Rosenberg]

Fuse-bpf requires access tp bpf_prog_f_ops to confirm the fd it was
given is in fact a bpf program.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 kernel/bpf/syscall.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 27760627370d..2000b6029e6a 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -2160,6 +2160,7 @@ const struct file_operations bpf_prog_fops = {
 	.read		= bpf_dummy_read,
 	.write		= bpf_dummy_write,
 };
+EXPORT_SYMBOL_GPL(bpf_prog_fops);
 
 int bpf_prog_new_fd(struct bpf_prog *prog)
 {
-- 
2.37.3.998.g577e59143f-goog

[PATCH 07/26] fuse-bpf: Prepare for fuse-bpf patch

[Daniel Rosenberg]

This moves some functions and structs around to make the following patch
easier to read.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/dir.c    | 30 ------------------------------
 fs/fuse/fuse_i.h | 35 +++++++++++++++++++++++++++++++++++
 fs/fuse/inode.c  | 46 +++++++++++++++++++++++-----------------------
 3 files changed, 58 insertions(+), 53 deletions(-)

diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index b585b04e815e..74e13af039f1 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -46,10 +46,6 @@ static inline u64 fuse_dentry_time(const struct dentry *entry)
 }
 
 #else
-union fuse_dentry {
-	u64 time;
-	struct rcu_head rcu;
-};
 
 static inline void __fuse_dentry_settime(struct dentry *dentry, u64 time)
 {
@@ -83,27 +79,6 @@ static void fuse_dentry_settime(struct dentry *dentry, u64 time)
 	__fuse_dentry_settime(dentry, time);
 }
 
-/*
- * FUSE caches dentries and attributes with separate timeout.  The
- * time in jiffies until the dentry/attributes are valid is stored in
- * dentry->d_fsdata and fuse_inode->i_time respectively.
- */
-
-/*
- * Calculate the time in jiffies until a dentry/attributes are valid
- */
-static u64 time_to_jiffies(u64 sec, u32 nsec)
-{
-	if (sec || nsec) {
-		struct timespec64 ts = {
-			sec,
-			min_t(u32, nsec, NSEC_PER_SEC - 1)
-		};
-
-		return get_jiffies_64() + timespec64_to_jiffies(&ts);
-	} else
-		return 0;
-}
 
 /*
  * Set dentry and possibly attribute timeouts from the lookup/mk*
@@ -115,11 +90,6 @@ void fuse_change_entry_timeout(struct dentry *entry, struct fuse_entry_out *o)
 		time_to_jiffies(o->entry_valid, o->entry_valid_nsec));
 }
 
-static u64 attr_timeout(struct fuse_attr_out *o)
-{
-	return time_to_jiffies(o->attr_valid, o->attr_valid_nsec);
-}
-
 u64 entry_attr_timeout(struct fuse_entry_out *o)
 {
 	return time_to_jiffies(o->attr_valid, o->attr_valid_nsec);
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 488b460e046f..054b96c3e061 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -63,6 +63,14 @@ struct fuse_forget_link {
 	struct fuse_forget_link *next;
 };
 
+/** FUSE specific dentry data */
+#if BITS_PER_LONG < 64
+union fuse_dentry {
+	u64 time;
+	struct rcu_head rcu;
+};
+#endif
+
 /** FUSE inode */
 struct fuse_inode {
 	/** Inode data */
@@ -1316,4 +1324,31 @@ struct fuse_file *fuse_file_open(struct fuse_mount *fm, u64 nodeid,
 void fuse_file_release(struct inode *inode, struct fuse_file *ff,
 		       unsigned int open_flags, fl_owner_t id, bool isdir);
 
+/*
+ * FUSE caches dentries and attributes with separate timeout.  The
+ * time in jiffies until the dentry/attributes are valid is stored in
+ * dentry->d_fsdata and fuse_inode->i_time respectively.
+ */
+
+/*
+ * Calculate the time in jiffies until a dentry/attributes are valid
+ */
+static inline u64 time_to_jiffies(u64 sec, u32 nsec)
+{
+	if (sec || nsec) {
+		struct timespec64 ts = {
+			sec,
+			min_t(u32, nsec, NSEC_PER_SEC - 1)
+		};
+
+		return get_jiffies_64() + timespec64_to_jiffies(&ts);
+	} else
+		return 0;
+}
+
+static inline u64 attr_timeout(struct fuse_attr_out *o)
+{
+	return time_to_jiffies(o->attr_valid, o->attr_valid_nsec);
+}
+
 #endif /* _FS_FUSE_I_H */
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 6b3beda16c1b..036a14e917e1 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -162,6 +162,28 @@ static ino_t fuse_squash_ino(u64 ino64)
 	return ino;
 }
 
+static void fuse_fill_attr_from_inode(struct fuse_attr *attr,
+				      const struct inode *inode)
+{
+	*attr = (struct fuse_attr){
+		.ino		= inode->i_ino,
+		.size		= inode->i_size,
+		.blocks		= inode->i_blocks,
+		.atime		= inode->i_atime.tv_sec,
+		.mtime		= inode->i_mtime.tv_sec,
+		.ctime		= inode->i_ctime.tv_sec,
+		.atimensec	= inode->i_atime.tv_nsec,
+		.mtimensec	= inode->i_mtime.tv_nsec,
+		.ctimensec	= inode->i_ctime.tv_nsec,
+		.mode		= inode->i_mode,
+		.nlink		= inode->i_nlink,
+		.uid		= inode->i_uid.val,
+		.gid		= inode->i_gid.val,
+		.rdev		= inode->i_rdev,
+		.blksize	= 1u << inode->i_blkbits,
+	};
+}
+
 void fuse_change_attributes_common(struct inode *inode, struct fuse_attr *attr,
 				   u64 attr_valid, u32 cache_mask)
 {
@@ -1386,28 +1408,6 @@ void fuse_dev_free(struct fuse_dev *fud)
 }
 EXPORT_SYMBOL_GPL(fuse_dev_free);
 
-static void fuse_fill_attr_from_inode(struct fuse_attr *attr,
-				      const struct fuse_inode *fi)
-{
-	*attr = (struct fuse_attr){
-		.ino		= fi->inode.i_ino,
-		.size		= fi->inode.i_size,
-		.blocks		= fi->inode.i_blocks,
-		.atime		= fi->inode.i_atime.tv_sec,
-		.mtime		= fi->inode.i_mtime.tv_sec,
-		.ctime		= fi->inode.i_ctime.tv_sec,
-		.atimensec	= fi->inode.i_atime.tv_nsec,
-		.mtimensec	= fi->inode.i_mtime.tv_nsec,
-		.ctimensec	= fi->inode.i_ctime.tv_nsec,
-		.mode		= fi->inode.i_mode,
-		.nlink		= fi->inode.i_nlink,
-		.uid		= fi->inode.i_uid.val,
-		.gid		= fi->inode.i_gid.val,
-		.rdev		= fi->inode.i_rdev,
-		.blksize	= 1u << fi->inode.i_blkbits,
-	};
-}
-
 static void fuse_sb_defaults(struct super_block *sb)
 {
 	sb->s_magic = FUSE_SUPER_MAGIC;
@@ -1451,7 +1451,7 @@ static int fuse_fill_super_submount(struct super_block *sb,
 	if (parent_sb->s_subtype && !sb->s_subtype)
 		return -ENOMEM;
 
-	fuse_fill_attr_from_inode(&root_attr, parent_fi);
+	fuse_fill_attr_from_inode(&root_attr, &parent_fi->inode);
 	root = fuse_iget(sb, parent_fi->nodeid, 0, &root_attr, 0, 0);
 	/*
 	 * This inode is just a duplicate, so it is not looked up and
-- 
2.37.3.998.g577e59143f-goog

[PATCH 08/26] fuse: Add fuse-bpf, a stacked fs extension for FUSE

[Daniel Rosenberg]

Fuse-bpf provides a short circuit path for Fuse implementations that act
as a stacked filesystem. For cases that are directly unchanged,
operations are passed directly to the backing filesystem. Small
adjustments can be handled by bpf prefilters or postfilters, with the
option to fall back to userspace as needed.

Fuse implementations may supply backing node information, as well as bpf
programs via an optional add on to the lookup structure.

This has been split over the next set of patches for readability.
Clusters of fuse ops have been split into their own patches, as well as
the actual bpf calls and userspace calls for filters.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Signed-off-by: Alessio Balsini <balsini@google.com>
---
 fs/fuse/Kconfig          |  10 ++
 fs/fuse/Makefile         |   1 +
 fs/fuse/backing.c        | 328 +++++++++++++++++++++++++++++++++++++++
 fs/fuse/dev.c            |  31 +++-
 fs/fuse/dir.c            | 218 +++++++++++++++++++++-----
 fs/fuse/file.c           |  25 ++-
 fs/fuse/fuse_i.h         | 185 +++++++++++++++++++++-
 fs/fuse/inode.c          | 178 ++++++++++++++++++---
 fs/fuse/ioctl.c          |   2 +-
 include/linux/bpf_fuse.h |   1 +
 10 files changed, 913 insertions(+), 66 deletions(-)
 create mode 100644 fs/fuse/backing.c

diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig
index 038ed0b9aaa5..e4fba7e60d03 100644
--- a/fs/fuse/Kconfig
+++ b/fs/fuse/Kconfig
@@ -52,3 +52,13 @@ config FUSE_DAX
 
 	  If you want to allow mounting a Virtio Filesystem with the "dax"
 	  option, answer Y.
+
+config FUSE_BPF
+	bool "Adds BPF to fuse"
+	depends on FUSE_FS
+	depends on BPF
+	help
+	  Extends FUSE by adding BPF to prefilter calls and potentially pass to a
+	  backing file system
+
+	  If you want to use FUSE as a stacked filesystem with bpf, answer Y
\ No newline at end of file
diff --git a/fs/fuse/Makefile b/fs/fuse/Makefile
index 0c48b35c058d..a0853c439db2 100644
--- a/fs/fuse/Makefile
+++ b/fs/fuse/Makefile
@@ -9,5 +9,6 @@ obj-$(CONFIG_VIRTIO_FS) += virtiofs.o
 
 fuse-y := dev.o dir.o file.o inode.o control.o xattr.o acl.o readdir.o ioctl.o
 fuse-$(CONFIG_FUSE_DAX) += dax.o
+fuse-$(CONFIG_FUSE_BPF) += backing.o
 
 virtiofs-y := virtio_fs.o
diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
new file mode 100644
index 000000000000..51088701e7ad
--- /dev/null
+++ b/fs/fuse/backing.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FUSE-BPF: Filesystem in Userspace with BPF
+ * Copyright (c) 2021 Google LLC
+ */
+
+#include "fuse_i.h"
+
+#include <linux/fdtable.h>
+#include <linux/filter.h>
+#include <linux/fs_stack.h>
+#include <linux/namei.h>
+#include <linux/bpf_fuse.h>
+
+struct bpf_prog *fuse_get_bpf_prog(struct file *file)
+{
+	struct bpf_prog *bpf_prog = ERR_PTR(-EINVAL);
+
+	if (!file || IS_ERR(file))
+		return bpf_prog;
+
+	if (file->f_op != &bpf_prog_fops)
+		return bpf_prog;
+
+	bpf_prog = file->private_data;
+	if (bpf_prog->type == BPF_PROG_TYPE_FUSE)
+		bpf_prog_inc(bpf_prog);
+	else
+		bpf_prog = ERR_PTR(-EINVAL);
+
+	return bpf_prog;
+}
+
+void fuse_get_backing_path(struct file *file, struct path *path)
+{
+	path_get(&file->f_path);
+	*path = file->f_path;
+}
+
+int parse_fuse_entry_bpf(struct fuse_entry_bpf *feb)
+{
+	struct fuse_entry_bpf_out *febo = &feb->out;
+	struct bpf_prog *bpf;
+	struct file *file;
+	int err = 0;
+
+	if (febo->backing_action == FUSE_ACTION_REPLACE) {
+		file = fget(febo->backing_fd);
+		if (!file) {
+			err = -EBADF;
+			goto out_err;
+		}
+		fuse_get_backing_path(file, &feb->backing_path);
+		fput(file);
+	}
+	if (febo->bpf_action == FUSE_ACTION_REPLACE) {
+		file = fget(febo->bpf_fd);
+		if (!file) {
+			err = -EBADF;
+			goto out_put;
+		}
+		bpf = fuse_get_bpf_prog(file);
+		if (IS_ERR(bpf)) {
+			err = PTR_ERR(bpf);
+			goto out_fput;
+		}
+		feb->bpf = bpf;
+		fput(file);
+	}
+
+	return 0;
+out_fput:
+	fput(file);
+out_put:
+	path_put_init(&feb->backing_path);
+out_err:
+	return err;
+}
+
+/*******************************************************************************
+ * Directory operations after here                                             *
+ ******************************************************************************/
+
+int fuse_lookup_initialize_in(struct bpf_fuse_args *fa, struct fuse_lookup_io *fli,
+			      struct inode *dir, struct dentry *entry, unsigned int flags)
+{
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_fuse_inode(dir)->nodeid,
+		.opcode = FUSE_LOOKUP,
+		.in_numargs = 1,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = entry->d_name.len + 1,
+			.max_size = NAME_MAX + 1,
+			.flags = BPF_FUSE_VARIABLE_SIZE | BPF_FUSE_MUST_ALLOCATE,
+			.value =  (void *) entry->d_name.name,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_lookup_initialize_out(struct bpf_fuse_args *fa, struct fuse_lookup_io *fli,
+			       struct inode *dir, struct dentry *entry, unsigned int flags)
+{
+	fa->out_numargs = 2;
+	fa->flags = FUSE_BPF_OUT_ARGVAR | FUSE_BPF_IS_LOOKUP;
+	fa->out_args[0] = (struct bpf_fuse_arg) {
+		.size = sizeof(fli->feo),
+		.value = &fli->feo,
+	};
+	fa->out_args[1] = (struct bpf_fuse_arg) {
+		.size = sizeof(fli->feb.out),
+		.value = &fli->feb.out,
+	};
+
+	return 0;
+}
+
+int fuse_lookup_backing(struct bpf_fuse_args *fa, struct dentry **out, struct inode *dir,
+			struct dentry *entry, unsigned int flags)
+{
+	struct fuse_dentry *fuse_entry = get_fuse_dentry(entry);
+	struct fuse_dentry *dir_fuse_entry = get_fuse_dentry(entry->d_parent);
+	struct dentry *dir_backing_entry = dir_fuse_entry->backing_path.dentry;
+	struct inode *dir_backing_inode = dir_backing_entry->d_inode;
+	struct dentry *backing_entry;
+	const char *name;
+	int len;
+
+	/* TODO this will not handle lookups over mount points */
+	inode_lock_nested(dir_backing_inode, I_MUTEX_PARENT);
+	if (fa->in_args[0].flags & BPF_FUSE_MODIFIED) {
+		name = (char *)fa->in_args[0].value;
+		len = strnlen(name, fa->in_args[0].size);
+	} else {
+		name = entry->d_name.name;
+		len = entry->d_name.len;
+	}
+	backing_entry = lookup_one_len(name, dir_backing_entry, len);
+	inode_unlock(dir_backing_inode);
+
+	if (IS_ERR(backing_entry))
+		return PTR_ERR(backing_entry);
+
+	fuse_entry->backing_path = (struct path) {
+		.dentry = backing_entry,
+		.mnt = dir_fuse_entry->backing_path.mnt,
+	};
+
+	mntget(fuse_entry->backing_path.mnt);
+	return 0;
+}
+
+int fuse_handle_backing(struct fuse_entry_bpf *feb, struct path *backing_path)
+{
+	switch (feb->out.backing_action) {
+	case FUSE_ACTION_KEEP:
+		/* backing inode/path are added in fuse_lookup_backing */
+		break;
+
+	case FUSE_ACTION_REMOVE:
+		path_put_init(backing_path);
+		break;
+
+	case FUSE_ACTION_REPLACE: {
+		if (!feb->backing_path.dentry)
+			return -EINVAL;
+
+		path_put(backing_path);
+		*backing_path = feb->backing_path;
+		feb->backing_path.dentry = NULL;
+		feb->backing_path.mnt = NULL;
+
+		break;
+	}
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int fuse_handle_bpf_prog(struct fuse_entry_bpf *feb, struct inode *parent,
+			 struct bpf_prog **bpf)
+{
+	struct fuse_inode *pi;
+
+	// Parent isn't presented, but we want to keep
+	// Don't touch bpf program at all in this case
+	if (feb->out.bpf_action == FUSE_ACTION_KEEP && !parent)
+		goto out;
+
+	if (*bpf) {
+		bpf_prog_put(*bpf);
+		*bpf = NULL;
+	}
+
+	switch (feb->out.bpf_action) {
+	case FUSE_ACTION_KEEP:
+		pi = get_fuse_inode(parent);
+		*bpf = pi->bpf;
+		if (*bpf)
+			bpf_prog_inc(*bpf);
+		break;
+
+	case FUSE_ACTION_REMOVE:
+		break;
+
+	case FUSE_ACTION_REPLACE: {
+		struct bpf_prog *bpf_prog = feb->bpf;
+
+		if (IS_ERR(bpf_prog))
+			return PTR_ERR(bpf_prog);
+
+		*bpf = bpf_prog;
+		break;
+	}
+
+	default:
+		return -EINVAL;
+	}
+
+out:
+	return 0;
+}
+
+int fuse_lookup_finalize(struct bpf_fuse_args *fa, struct dentry **out,
+			 struct inode *dir, struct dentry *entry, unsigned int flags)
+{
+	struct fuse_dentry *fd;
+	struct dentry *backing_dentry;
+	struct inode *inode, *backing_inode;
+	struct inode *d_inode = entry->d_inode;
+	struct fuse_entry_out *feo = fa->out_args[0].value;
+	struct fuse_entry_bpf_out *febo = fa->out_args[1].value;
+	struct fuse_entry_bpf *feb = container_of(febo, struct fuse_entry_bpf, out);
+	int error = -1;
+	u64 target_nodeid = 0;
+
+	fd = get_fuse_dentry(entry);
+	if (!fd)
+		return -EIO;
+	error = fuse_handle_backing(feb, &fd->backing_path);
+	if (error)
+		return error;
+	backing_dentry = fd->backing_path.dentry;
+	if (!backing_dentry)
+		return -ENOENT;
+	backing_inode = backing_dentry->d_inode;
+	if (!backing_inode) {
+		*out = 0;
+		return 0;
+	}
+
+	if (d_inode)
+		target_nodeid = get_fuse_inode(d_inode)->nodeid;
+
+	inode = fuse_iget_backing(dir->i_sb, target_nodeid, backing_inode);
+
+	if (IS_ERR(inode))
+		return PTR_ERR(inode);
+
+	error = fuse_handle_bpf_prog(feb, dir, &get_fuse_inode(inode)->bpf);
+	if (error)
+		return error;
+
+	get_fuse_inode(inode)->nodeid = feo->nodeid;
+
+	*out = d_splice_alias(inode, entry);
+	return 0;
+}
+
+int fuse_revalidate_backing(struct dentry *entry, unsigned int flags)
+{
+	struct fuse_dentry *fuse_dentry = get_fuse_dentry(entry);
+	struct dentry *backing_entry = fuse_dentry->backing_path.dentry;
+
+	spin_lock(&backing_entry->d_lock);
+	if (d_unhashed(backing_entry)) {
+		spin_unlock(&backing_entry->d_lock);
+		return 0;
+	}
+	spin_unlock(&backing_entry->d_lock);
+
+	if (unlikely(backing_entry->d_flags & DCACHE_OP_REVALIDATE))
+		return backing_entry->d_op->d_revalidate(backing_entry, flags);
+	return 1;
+}
+
+int fuse_access_initialize_in(struct bpf_fuse_args *fa, struct fuse_access_in *fai,
+			      struct inode *inode, int mask)
+{
+	*fai = (struct fuse_access_in) {
+		.mask = mask,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.opcode = FUSE_ACCESS,
+		.nodeid = get_node_id(inode),
+		.in_numargs = 1,
+		.in_args[0].size = sizeof(*fai),
+		.in_args[0].value = fai,
+	};
+
+	return 0;
+}
+
+int fuse_access_initialize_out(struct bpf_fuse_args *fa, struct fuse_access_in *fai,
+			       struct inode *inode, int mask)
+{
+	return 0;
+}
+
+int fuse_access_backing(struct bpf_fuse_args *fa, int *out, struct inode *inode, int mask)
+{
+	struct fuse_inode *fi = get_fuse_inode(inode);
+	const struct fuse_access_in *fai = fa->in_args[0].value;
+
+	*out = inode_permission(&init_user_ns, fi->backing_inode, fai->mask);
+	return 0;
+}
+
+int fuse_access_finalize(struct bpf_fuse_args *fa, int *out, struct inode *inode, int mask)
+{
+	return 0;
+}
+
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 51897427a534..626dbbf92874 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -238,6 +238,11 @@ void fuse_queue_forget(struct fuse_conn *fc, struct fuse_forget_link *forget,
 {
 	struct fuse_iqueue *fiq = &fc->iq;
 
+	if (nodeid == 0) {
+		kfree(forget);
+		return;
+	}
+
 	forget->forget_one.nodeid = nodeid;
 	forget->forget_one.nlookup = nlookup;
 
@@ -475,6 +480,7 @@ static void fuse_args_to_req(struct fuse_req *req, struct fuse_args *args)
 {
 	req->in.h.opcode = args->opcode;
 	req->in.h.nodeid = args->nodeid;
+	req->in.h.error_in = args->error_in;
 	req->args = args;
 	if (args->end)
 		__set_bit(FR_ASYNC, &req->flags);
@@ -1005,10 +1011,27 @@ static int fuse_copy_one(struct fuse_copy_state *cs, void *val, unsigned size)
 	return 0;
 }
 
+/* Copy the fuse-bpf lookup args and verify them */
+static int fuse_copy_lookup(struct fuse_copy_state *cs, void *val, unsigned size)
+{
+	struct fuse_entry_bpf_out *febo = (struct fuse_entry_bpf_out *)val;
+	struct fuse_entry_bpf *feb = container_of(febo, struct fuse_entry_bpf, out);
+	int err;
+
+	if (size && size != sizeof(*febo))
+		return -EINVAL;
+	err = fuse_copy_one(cs, val, size);
+	if (err)
+		return err;
+	if (size)
+		err = parse_fuse_entry_bpf(feb);
+	return err;
+}
+
 /* Copy request arguments to/from userspace buffer */
 static int fuse_copy_args(struct fuse_copy_state *cs, unsigned numargs,
 			  unsigned argpages, struct fuse_arg *args,
-			  int zeroing)
+			  int zeroing, unsigned is_lookup)
 {
 	int err = 0;
 	unsigned i;
@@ -1017,6 +1040,8 @@ static int fuse_copy_args(struct fuse_copy_state *cs, unsigned numargs,
 		struct fuse_arg *arg = &args[i];
 		if (i == numargs - 1 && argpages)
 			err = fuse_copy_pages(cs, arg->size, zeroing);
+		else if (i == numargs - 1 && is_lookup)
+			err = fuse_copy_lookup(cs, arg->value, arg->size);
 		else
 			err = fuse_copy_one(cs, arg->value, arg->size);
 	}
@@ -1294,7 +1319,7 @@ static ssize_t fuse_dev_do_read(struct fuse_dev *fud, struct file *file,
 	err = fuse_copy_one(cs, &req->in.h, sizeof(req->in.h));
 	if (!err)
 		err = fuse_copy_args(cs, args->in_numargs, args->in_pages,
-				     (struct fuse_arg *) args->in_args, 0);
+				     (struct fuse_arg *) args->in_args, 0, 0);
 	fuse_copy_finish(cs);
 	spin_lock(&fpq->lock);
 	clear_bit(FR_LOCKED, &req->flags);
@@ -1833,7 +1858,7 @@ static int copy_out_args(struct fuse_copy_state *cs, struct fuse_args *args,
 		lastarg->size -= diffsize;
 	}
 	return fuse_copy_args(cs, args->out_numargs, args->out_pages,
-			      args->out_args, args->page_zeroing);
+			      args->out_args, args->page_zeroing, args->is_lookup);
 }
 
 /*
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 74e13af039f1..daaf3576fab9 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -10,6 +10,7 @@
 
 #include <linux/pagemap.h>
 #include <linux/file.h>
+#include <linux/filter.h>
 #include <linux/fs_context.h>
 #include <linux/moduleparam.h>
 #include <linux/sched.h>
@@ -34,7 +35,7 @@ static void fuse_advise_use_readdirplus(struct inode *dir)
 	set_bit(FUSE_I_ADVISE_RDPLUS, &fi->state);
 }
 
-#if BITS_PER_LONG >= 64
+#if BITS_PER_LONG >= 64 && !defined(CONFIG_FUSE_BPF)
 static inline void __fuse_dentry_settime(struct dentry *entry, u64 time)
 {
 	entry->d_fsdata = (void *) time;
@@ -49,12 +50,12 @@ static inline u64 fuse_dentry_time(const struct dentry *entry)
 
 static inline void __fuse_dentry_settime(struct dentry *dentry, u64 time)
 {
-	((union fuse_dentry *) dentry->d_fsdata)->time = time;
+	((struct fuse_dentry *) dentry->d_fsdata)->time = time;
 }
 
 static inline u64 fuse_dentry_time(const struct dentry *entry)
 {
-	return ((union fuse_dentry *) entry->d_fsdata)->time;
+	return ((struct fuse_dentry *) entry->d_fsdata)->time;
 }
 #endif
 
@@ -79,6 +80,17 @@ static void fuse_dentry_settime(struct dentry *dentry, u64 time)
 	__fuse_dentry_settime(dentry, time);
 }
 
+void fuse_init_dentry_root(struct dentry *root, struct file *backing_dir)
+{
+#ifdef CONFIG_FUSE_BPF
+	struct fuse_dentry *fuse_dentry = root->d_fsdata;
+
+	if (backing_dir) {
+		fuse_dentry->backing_path = backing_dir->f_path;
+		path_get(&fuse_dentry->backing_path);
+	}
+#endif
+}
 
 /*
  * Set dentry and possibly attribute timeouts from the lookup/mk*
@@ -150,7 +162,8 @@ static void fuse_invalidate_entry(struct dentry *entry)
 
 static void fuse_lookup_init(struct fuse_conn *fc, struct fuse_args *args,
 			     u64 nodeid, const struct qstr *name,
-			     struct fuse_entry_out *outarg)
+			     struct fuse_entry_out *outarg,
+			     struct fuse_entry_bpf_out *bpf_outarg)
 {
 	memset(outarg, 0, sizeof(struct fuse_entry_out));
 	args->opcode = FUSE_LOOKUP;
@@ -158,11 +171,51 @@ static void fuse_lookup_init(struct fuse_conn *fc, struct fuse_args *args,
 	args->in_numargs = 1;
 	args->in_args[0].size = name->len + 1;
 	args->in_args[0].value = name->name;
-	args->out_numargs = 1;
+	args->out_argvar = true;
+	args->out_numargs = 2;
 	args->out_args[0].size = sizeof(struct fuse_entry_out);
 	args->out_args[0].value = outarg;
+	args->out_args[1].size = sizeof(struct fuse_entry_bpf_out);
+	args->out_args[1].value = bpf_outarg;
+	args->is_lookup = 1;
 }
 
+#ifdef CONFIG_FUSE_BPF
+static bool backing_data_changed(struct fuse_inode *fi, struct dentry *entry,
+				 struct fuse_entry_bpf *bpf_arg)
+{
+	struct path new_backing_path;
+	struct inode *new_backing_inode;
+	struct bpf_prog *bpf = NULL;
+	int err;
+	bool ret = true;
+
+	if (!entry)
+		return false;
+
+	get_fuse_backing_path(entry, &new_backing_path);
+
+	err = fuse_handle_backing(bpf_arg, &new_backing_path);
+	new_backing_inode = d_inode(new_backing_path.dentry);
+
+	if (err)
+		goto put_inode;
+
+	err = fuse_handle_bpf_prog(bpf_arg, entry->d_parent->d_inode, &bpf);
+	if (err)
+		goto put_bpf;
+
+	ret = (bpf != fi->bpf || fi->backing_inode != new_backing_inode ||
+			!path_equal(&get_fuse_dentry(entry)->backing_path, &new_backing_path));
+put_bpf:
+	if (bpf)
+		bpf_prog_put(bpf);
+put_inode:
+	path_put(&new_backing_path);
+	return ret;
+}
+#endif
+
 /*
  * Check whether the dentry is still valid
  *
@@ -183,9 +236,23 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags)
 	inode = d_inode_rcu(entry);
 	if (inode && fuse_is_bad(inode))
 		goto invalid;
-	else if (time_before64(fuse_dentry_time(entry), get_jiffies_64()) ||
+
+#ifdef CONFIG_FUSE_BPF
+	/* TODO: Do we need bpf support for revalidate?
+	 * If the lower filesystem says the entry is invalid, FUSE probably shouldn't
+	 * try to fix that without going through the normal lookup path...
+	 */
+	if (get_fuse_dentry(entry)->backing_path.dentry) {
+		ret = fuse_revalidate_backing(entry, flags);
+		if (ret <= 0) {
+			goto out;
+		}
+	}
+#endif
+	if (time_before64(fuse_dentry_time(entry), get_jiffies_64()) ||
 		 (flags & (LOOKUP_EXCL | LOOKUP_REVAL))) {
 		struct fuse_entry_out outarg;
+		struct fuse_entry_bpf bpf_arg;
 		FUSE_ARGS(args);
 		struct fuse_forget_link *forget;
 		u64 attr_version;
@@ -197,27 +264,44 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags)
 		ret = -ECHILD;
 		if (flags & LOOKUP_RCU)
 			goto out;
-
 		fm = get_fuse_mount(inode);
 
+		parent = dget_parent(entry);
+
+#ifdef CONFIG_FUSE_BPF
+		/* TODO: Once we're handling timeouts for backing inodes, do a
+		 * bpf based lookup_revalidate here.
+		 */
+		if (get_fuse_inode(parent->d_inode)->backing_inode) {
+			dput(parent);
+			ret = 1;
+			goto out;
+		}
+#endif
 		forget = fuse_alloc_forget();
 		ret = -ENOMEM;
-		if (!forget)
+		if (!forget) {
+			dput(parent);
 			goto out;
+		}
 
 		attr_version = fuse_get_attr_version(fm->fc);
 
-		parent = dget_parent(entry);
 		fuse_lookup_init(fm->fc, &args, get_node_id(d_inode(parent)),
-				 &entry->d_name, &outarg);
+				 &entry->d_name, &outarg, &bpf_arg.out);
 		ret = fuse_simple_request(fm, &args);
 		dput(parent);
+
 		/* Zero nodeid is same as -ENOENT */
 		if (!ret && !outarg.nodeid)
 			ret = -ENOENT;
-		if (!ret) {
+		if (!ret || ret == sizeof(bpf_arg.out)) {
 			fi = get_fuse_inode(inode);
 			if (outarg.nodeid != get_node_id(inode) ||
+#ifdef CONFIG_FUSE_BPF
+			    (ret == sizeof(bpf_arg.out) &&
+					    backing_data_changed(fi, entry, &bpf_arg)) ||
+#endif
 			    (bool) IS_AUTOMOUNT(inode) != (bool) (outarg.attr.flags & FUSE_ATTR_SUBMOUNT)) {
 				fuse_queue_forget(fm->fc, forget,
 						  outarg.nodeid, 1);
@@ -259,17 +343,20 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags)
 	goto out;
 }
 
-#if BITS_PER_LONG < 64
+#if BITS_PER_LONG < 64 || defined(CONFIG_FUSE_BPF)
 static int fuse_dentry_init(struct dentry *dentry)
 {
-	dentry->d_fsdata = kzalloc(sizeof(union fuse_dentry),
+	dentry->d_fsdata = kzalloc(sizeof(struct fuse_dentry),
 				   GFP_KERNEL_ACCOUNT | __GFP_RECLAIMABLE);
 
 	return dentry->d_fsdata ? 0 : -ENOMEM;
 }
 static void fuse_dentry_release(struct dentry *dentry)
 {
-	union fuse_dentry *fd = dentry->d_fsdata;
+	struct fuse_dentry *fd = dentry->d_fsdata;
+
+	if (fd && fd->backing_path.dentry)
+		path_put(&fd->backing_path);
 
 	kfree_rcu(fd, rcu);
 }
@@ -310,7 +397,7 @@ static struct vfsmount *fuse_dentry_automount(struct path *path)
 const struct dentry_operations fuse_dentry_operations = {
 	.d_revalidate	= fuse_dentry_revalidate,
 	.d_delete	= fuse_dentry_delete,
-#if BITS_PER_LONG < 64
+#if BITS_PER_LONG < 64 || defined(CONFIG_FUSE_BPF)
 	.d_init		= fuse_dentry_init,
 	.d_release	= fuse_dentry_release,
 #endif
@@ -318,7 +405,7 @@ const struct dentry_operations fuse_dentry_operations = {
 };
 
 const struct dentry_operations fuse_root_dentry_operations = {
-#if BITS_PER_LONG < 64
+#if BITS_PER_LONG < 64 || defined(CONFIG_FUSE_BPF)
 	.d_init		= fuse_dentry_init,
 	.d_release	= fuse_dentry_release,
 #endif
@@ -336,11 +423,13 @@ bool fuse_invalid_attr(struct fuse_attr *attr)
 		attr->size > LLONG_MAX;
 }
 
-int fuse_lookup_name(struct super_block *sb, u64 nodeid, const struct qstr *name,
-		     struct fuse_entry_out *outarg, struct inode **inode)
+int fuse_lookup_name(struct super_block *sb, u64 nodeid,
+		     const struct qstr *name, struct fuse_entry_out *outarg,
+		     struct dentry *entry, struct inode **inode)
 {
 	struct fuse_mount *fm = get_fuse_mount_super(sb);
 	FUSE_ARGS(args);
+	struct fuse_entry_bpf bpf_arg = { 0 };
 	struct fuse_forget_link *forget;
 	u64 attr_version;
 	int err;
@@ -358,23 +447,60 @@ int fuse_lookup_name(struct super_block *sb, u64 nodeid, const struct qstr *name
 
 	attr_version = fuse_get_attr_version(fm->fc);
 
-	fuse_lookup_init(fm->fc, &args, nodeid, name, outarg);
+	fuse_lookup_init(fm->fc, &args, nodeid, name, outarg, &bpf_arg.out);
 	err = fuse_simple_request(fm, &args);
-	/* Zero nodeid is same as -ENOENT, but with valid timeout */
-	if (err || !outarg->nodeid)
-		goto out_put_forget;
 
-	err = -EIO;
-	if (!outarg->nodeid)
-		goto out_put_forget;
-	if (fuse_invalid_attr(&outarg->attr))
-		goto out_put_forget;
-
-	*inode = fuse_iget(sb, outarg->nodeid, outarg->generation,
-			   &outarg->attr, entry_attr_timeout(outarg),
-			   attr_version);
+#ifdef CONFIG_FUSE_BPF
+	if (err == sizeof(bpf_arg.out)) {
+		/* TODO Make sure this handles invalid handles */
+		struct path *backing_path;
+		struct inode *backing_inode;
+
+		err = -ENOENT;
+		if (!entry)
+			goto out_queue_forget;
+
+		err = -EINVAL;
+		backing_path = &bpf_arg.backing_path;
+		if (!backing_path->dentry)
+			goto out_queue_forget;
+
+		err = fuse_handle_backing(&bpf_arg,
+				&get_fuse_dentry(entry)->backing_path);
+		if (err)
+			goto out_queue_forget;
+
+		backing_inode = d_inode(get_fuse_dentry(entry)->backing_path.dentry);
+		*inode = fuse_iget_backing(sb, outarg->nodeid, backing_inode);
+		if (!*inode)
+			goto out_queue_forget;
+
+		err = fuse_handle_bpf_prog(&bpf_arg, NULL, &get_fuse_inode(*inode)->bpf);
+		if (err)
+			goto out;
+	} else
+#endif
+	{
+		/* Zero nodeid is same as -ENOENT, but with valid timeout */
+		if (err || !outarg->nodeid)
+			goto out_put_forget;
+
+		err = -EIO;
+		if (!outarg->nodeid)
+			goto out_put_forget;
+		if (fuse_invalid_attr(&outarg->attr))
+			goto out_put_forget;
+
+		*inode = fuse_iget(sb, outarg->nodeid, outarg->generation,
+				   &outarg->attr, entry_attr_timeout(outarg),
+				   attr_version);
+	}
+
 	err = -ENOMEM;
-	if (!*inode) {
+#ifdef CONFIG_FUSE_BPF
+out_queue_forget:
+#endif
+	if (!*inode && outarg->nodeid) {
 		fuse_queue_forget(fm->fc, forget, outarg->nodeid, 1);
 		goto out;
 	}
@@ -396,12 +522,20 @@ static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
 	bool outarg_valid = true;
 	bool locked;
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(dir, struct fuse_lookup_io, newent,
+			       fuse_lookup_initialize_in, fuse_lookup_initialize_out,
+			       fuse_lookup_backing, fuse_lookup_finalize,
+			       dir, entry, flags))
+		return newent;
+#endif
+
 	if (fuse_is_bad(dir))
 		return ERR_PTR(-EIO);
 
 	locked = fuse_lock_inode(dir);
 	err = fuse_lookup_name(dir->i_sb, get_node_id(dir), &entry->d_name,
-			       &outarg, &inode);
+			       &outarg, entry, &inode);
 	fuse_unlock_inode(dir, locked);
 	if (err == -ENOENT) {
 		outarg_valid = false;
@@ -1230,6 +1364,13 @@ static int fuse_access(struct inode *inode, int mask)
 	struct fuse_access_in inarg;
 	int err;
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(inode, struct fuse_access_in, err,
+			       fuse_access_initialize_in, fuse_access_initialize_out,
+			       fuse_access_backing, fuse_access_finalize, inode, mask))
+		return err;
+#endif
+
 	BUG_ON(mask & MAY_NOT_BLOCK);
 
 	if (fm->fc->no_access)
@@ -1278,6 +1419,7 @@ static int fuse_permission(struct user_namespace *mnt_userns,
 	struct fuse_conn *fc = get_fuse_conn(inode);
 	bool refreshed = false;
 	int err = 0;
+	struct fuse_inode *fi = get_fuse_inode(inode);
 
 	if (fuse_is_bad(inode))
 		return -EIO;
@@ -1285,12 +1427,18 @@ static int fuse_permission(struct user_namespace *mnt_userns,
 	if (!fuse_allow_current_process(fc))
 		return -EACCES;
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(inode, struct fuse_access_in, err,
+			       fuse_access_initialize_in, fuse_access_initialize_out,
+			       fuse_access_backing, fuse_access_finalize, inode, mask))
+		return err;
+#endif
+
 	/*
 	 * If attributes are needed, refresh them before proceeding
 	 */
 	if (fc->default_permissions ||
 	    ((mask & MAY_EXEC) && S_ISREG(inode->i_mode))) {
-		struct fuse_inode *fi = get_fuse_inode(inode);
 		u32 perm_mask = STATX_MODE | STATX_UID | STATX_GID;
 
 		if (perm_mask & READ_ONCE(fi->inval_mask) ||
@@ -1467,7 +1615,7 @@ static long fuse_dir_compat_ioctl(struct file *file, unsigned int cmd,
 				 FUSE_IOCTL_COMPAT | FUSE_IOCTL_DIR);
 }
 
-static bool update_mtime(unsigned ivalid, bool trust_local_mtime)
+static inline bool update_mtime(unsigned int ivalid, bool trust_local_mtime)
 {
 	/* Always update if mtime is explicitly set  */
 	if (ivalid & ATTR_MTIME_SET)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 1a3afd469e3a..4fa2ebc068f0 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -8,6 +8,7 @@
 
 #include "fuse_i.h"
 
+#include <linux/filter.h>
 #include <linux/pagemap.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
@@ -125,13 +126,18 @@ static void fuse_file_put(struct fuse_file *ff, bool sync, bool isdir)
 }
 
 struct fuse_file *fuse_file_open(struct fuse_mount *fm, u64 nodeid,
-				 unsigned int open_flags, bool isdir)
+				 unsigned int open_flags, bool isdir, struct file *file)
 {
 	struct fuse_conn *fc = fm->fc;
 	struct fuse_file *ff;
 	int opcode = isdir ? FUSE_OPENDIR : FUSE_OPEN;
 
-	ff = fuse_file_alloc(fm);
+	if (file && file->private_data) {
+		ff = file->private_data;
+		file->private_data = NULL;
+	} else {
+		ff = fuse_file_alloc(fm);
+	}
 	if (!ff)
 		return ERR_PTR(-ENOMEM);
 
@@ -169,7 +175,7 @@ struct fuse_file *fuse_file_open(struct fuse_mount *fm, u64 nodeid,
 int fuse_do_open(struct fuse_mount *fm, u64 nodeid, struct file *file,
 		 bool isdir)
 {
-	struct fuse_file *ff = fuse_file_open(fm, nodeid, file->f_flags, isdir);
+	struct fuse_file *ff = fuse_file_open(fm, nodeid, file->f_flags, isdir, file);
 
 	if (!IS_ERR(ff))
 		file->private_data = ff;
@@ -1873,6 +1879,19 @@ int fuse_write_inode(struct inode *inode, struct writeback_control *wbc)
 	 */
 	WARN_ON(wbc->for_reclaim);
 
+	/**
+	 * TODO - fully understand why this is necessary
+	 *
+	 * With fuse-bpf, fsstress fails if rename is enabled without this
+	 *
+	 * We are getting writes here on directory inodes, which do not have an
+	 * initialized file list so crash.
+	 *
+	 * The question is why we are getting those writes
+	 */
+	if (!S_ISREG(inode->i_mode))
+		return 0;
+
 	ff = __fuse_write_file_get(fi);
 	err = fuse_flush_times(inode, ff);
 	if (ff)
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 054b96c3e061..30ddc298fb27 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -13,9 +13,12 @@
 # define pr_fmt(fmt) "fuse: " fmt
 #endif
 
+#include <linux/filter.h>
 #include <linux/fuse.h>
 #include <linux/fs.h>
 #include <linux/mount.h>
+#include <linux/pagemap.h>
+#include <linux/statfs.h>
 #include <linux/wait.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
@@ -31,6 +34,8 @@
 #include <linux/pid_namespace.h>
 #include <linux/refcount.h>
 #include <linux/user_namespace.h>
+#include <linux/bpf_fuse.h>
+#include <linux/magic.h>
 
 /** Default max number of pages that can be used in a single read request */
 #define FUSE_DEFAULT_MAX_PAGES_PER_REQ 32
@@ -64,11 +69,35 @@ struct fuse_forget_link {
 };
 
 /** FUSE specific dentry data */
-#if BITS_PER_LONG < 64
-union fuse_dentry {
-	u64 time;
-	struct rcu_head rcu;
+#if BITS_PER_LONG < 64 || defined(CONFIG_FUSE_BPF)
+struct fuse_dentry {
+	union {
+		u64 time;
+		struct rcu_head rcu;
+	};
+	struct path backing_path;
 };
+
+static inline struct fuse_dentry *get_fuse_dentry(const struct dentry *entry)
+{
+	return entry->d_fsdata;
+}
+#endif
+
+#ifdef CONFIG_FUSE_BPF
+static inline void get_fuse_backing_path(const struct dentry *d,
+					  struct path *path)
+{
+	struct fuse_dentry *di = get_fuse_dentry(d);
+
+	if (!di) {
+		*path = (struct path) { .mnt = 0, .dentry = 0 };
+		return;
+	}
+
+	*path = di->backing_path;
+	path_get(path);
+}
 #endif
 
 /** FUSE inode */
@@ -76,6 +105,20 @@ struct fuse_inode {
 	/** Inode data */
 	struct inode inode;
 
+#ifdef CONFIG_FUSE_BPF
+	/**
+	 * Backing inode, if this inode is from a backing file system.
+	 * If this is set, nodeid is 0.
+	 */
+	struct inode *backing_inode;
+
+	/**
+	 * bpf_prog, run on all operations to determine whether to pass through
+	 * or handle in place
+	 */
+	struct bpf_prog *bpf;
+#endif
+
 	/** Unique ID, which identifies the inode between userspace
 	 * and kernel */
 	u64 nodeid;
@@ -226,6 +269,14 @@ struct fuse_file {
 
 	} readdir;
 
+#ifdef CONFIG_FUSE_BPF
+	/**
+	 * TODO: Reconcile with passthrough file
+	 * backing file when in bpf mode
+	 */
+	struct file *backing_file;
+#endif
+
 	/** RB node to be linked on fuse_conn->polled_files */
 	struct rb_node polled_node;
 
@@ -257,6 +308,7 @@ struct fuse_page_desc {
 struct fuse_args {
 	uint64_t nodeid;
 	uint32_t opcode;
+	uint32_t error_in;
 	unsigned short in_numargs;
 	unsigned short out_numargs;
 	bool force:1;
@@ -269,6 +321,7 @@ struct fuse_args {
 	bool page_zeroing:1;
 	bool page_replace:1;
 	bool may_block:1;
+	bool is_lookup:1;
 	struct fuse_in_arg in_args[3];
 	struct fuse_arg out_args[2];
 	void (*end)(struct fuse_mount *fm, struct fuse_args *args, int error);
@@ -522,6 +575,8 @@ struct fuse_fs_context {
 	unsigned int max_read;
 	unsigned int blksize;
 	const char *subtype;
+	struct bpf_prog *root_bpf;
+	struct file *root_dir;
 
 	/* DAX device, may be NULL */
 	struct dax_device *dax_dev;
@@ -962,12 +1017,16 @@ extern const struct dentry_operations fuse_root_dentry_operations;
 /**
  * Get a filled in inode
  */
+struct inode *fuse_iget_backing(struct super_block *sb,
+				u64 nodeid,
+				struct inode *backing_inode);
 struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
 			int generation, struct fuse_attr *attr,
 			u64 attr_valid, u64 attr_version);
 
 int fuse_lookup_name(struct super_block *sb, u64 nodeid, const struct qstr *name,
-		     struct fuse_entry_out *outarg, struct inode **inode);
+		     struct fuse_entry_out *outarg,
+		     struct dentry *entry, struct inode **inode);
 
 /**
  * Send FORGET command
@@ -1112,6 +1171,7 @@ void fuse_invalidate_entry_cache(struct dentry *entry);
 void fuse_invalidate_atime(struct inode *inode);
 
 u64 entry_attr_timeout(struct fuse_entry_out *o);
+void fuse_init_dentry_root(struct dentry *root, struct file *backing_dir);
 void fuse_change_entry_timeout(struct dentry *entry, struct fuse_entry_out *o);
 
 /**
@@ -1320,10 +1380,58 @@ int fuse_fileattr_set(struct user_namespace *mnt_userns,
 /* file.c */
 
 struct fuse_file *fuse_file_open(struct fuse_mount *fm, u64 nodeid,
-				 unsigned int open_flags, bool isdir);
+				 unsigned int open_flags, bool isdir,
+				 struct file *file);
 void fuse_file_release(struct inode *inode, struct fuse_file *ff,
 		       unsigned int open_flags, fl_owner_t id, bool isdir);
 
+/* backing.c */
+
+struct bpf_prog *fuse_get_bpf_prog(struct file *file);
+void fuse_get_backing_path(struct file *file, struct path *path);
+
+/*
+ * Dummy io passed to fuse_bpf_backing when io operation needs no scratch space
+ */
+struct fuse_dummy_io {
+	int unused;
+};
+
+struct fuse_entry_bpf {
+	struct fuse_entry_bpf_out out;
+
+	struct path backing_path;
+	struct bpf_prog *bpf;
+};
+
+int parse_fuse_entry_bpf(struct fuse_entry_bpf *feb);
+
+struct fuse_lookup_io {
+	struct fuse_entry_out feo;
+	struct fuse_entry_bpf feb;
+};
+
+int fuse_handle_backing(struct fuse_entry_bpf *feb, struct path *backing_path);
+int fuse_handle_bpf_prog(struct fuse_entry_bpf *feb, struct inode *parent,
+			 struct bpf_prog **bpf);
+
+int fuse_lookup_initialize_in(struct bpf_fuse_args *fa, struct fuse_lookup_io *feo,
+			      struct inode *dir, struct dentry *entry, unsigned int flags);
+int fuse_lookup_initialize_out(struct bpf_fuse_args *fa, struct fuse_lookup_io *feo,
+			       struct inode *dir, struct dentry *entry, unsigned int flags);
+int fuse_lookup_backing(struct bpf_fuse_args *fa, struct dentry **out, struct inode *dir,
+			struct dentry *entry, unsigned int flags);
+int fuse_lookup_finalize(struct bpf_fuse_args *fa, struct dentry **out,
+			 struct inode *dir, struct dentry *entry, unsigned int flags);
+int fuse_revalidate_backing(struct dentry *entry, unsigned int flags);
+
+int fuse_access_initialize_in(struct bpf_fuse_args *fa, struct fuse_access_in *fai,
+			      struct inode *inode, int mask);
+int fuse_access_initialize_out(struct bpf_fuse_args *fa, struct fuse_access_in *fai,
+			       struct inode *inode, int mask);
+int fuse_access_backing(struct bpf_fuse_args *fa, int *out, struct inode *inode, int mask);
+int fuse_access_finalize(struct bpf_fuse_args *fa, int *out, struct inode *inode, int mask);
+
 /*
  * FUSE caches dentries and attributes with separate timeout.  The
  * time in jiffies until the dentry/attributes are valid is stored in
@@ -1351,4 +1459,69 @@ static inline u64 attr_timeout(struct fuse_attr_out *o)
 	return time_to_jiffies(o->attr_valid, o->attr_valid_nsec);
 }
 
+#ifdef CONFIG_FUSE_BPF
+/*
+ * expression statement to wrap the backing filter logic
+ * struct inode *inode: inode with bpf and backing inode
+ * typedef io: (typically complex) type whose components fuse_args can point to.
+ *	An instance of this type is created locally and passed to initialize
+ * void initialize_in(struct bpf_fuse_args *fa, io *in_out, args...): function that sets
+ *	up fa and io based on args
+ * void initialize_out(struct bpf_fuse_args *fa, io *in_out, args...): function that sets
+ *	up fa and io based on args
+ * int backing(struct fuse_bpf_args_internal *fa, args...): function that actually performs
+ *	the backing io operation
+ * void *finalize(struct fuse_bpf_args *, args...): function that performs any final
+ *	work needed to commit the backing io
+ */
+#define fuse_bpf_backing(inode, io, out, initialize_in, initialize_out,	\
+			 backing, finalize, args...)			\
+({									\
+	struct fuse_inode *fuse_inode = get_fuse_inode(inode);		\
+	struct bpf_fuse_args fa = { 0 };				\
+	bool initialized = false;					\
+	bool handled = false;						\
+	ssize_t res;							\
+	io feo = { 0 };							\
+	int error = 0;							\
+									\
+	do {								\
+		if (!fuse_inode || !fuse_inode->backing_inode)		\
+			break;						\
+									\
+		handled = true;						\
+		error = initialize_in(&fa, &feo, args);			\
+		if (error)						\
+			break;						\
+									\
+		error = initialize_out(&fa, &feo, args);		\
+		if (error)						\
+			break;						\
+									\
+		initialized = true;					\
+									\
+		error = backing(&fa, &out, args);			\
+		if (error < 0)						\
+			fa.error_in = error;				\
+									\
+	} while (false);						\
+									\
+	if (initialized && handled) {					\
+		res = finalize(&fa, &out, args);			\
+		if (res)						\
+			error = res;					\
+	}								\
+									\
+	out = error ? _Generic((out),					\
+			default :					\
+				error,					\
+			struct dentry * :				\
+				ERR_PTR(error),				\
+			const char * :					\
+				ERR_PTR(error)				\
+			) : (out);					\
+	handled;							\
+})
+#endif /* CONFIG_FUSE_BPF */
+
 #endif /* _FS_FUSE_I_H */
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 036a14e917e1..ca65199b38cb 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -78,6 +78,10 @@ static struct inode *fuse_alloc_inode(struct super_block *sb)
 
 	fi->i_time = 0;
 	fi->inval_mask = 0;
+#ifdef CONFIG_FUSE_BPF
+	fi->backing_inode = NULL;
+	fi->bpf = NULL;
+#endif
 	fi->nodeid = 0;
 	fi->nlookup = 0;
 	fi->attr_version = 0;
@@ -120,6 +124,13 @@ static void fuse_evict_inode(struct inode *inode)
 	/* Will write inode on close/munmap and in all other dirtiers */
 	WARN_ON(inode->i_state & I_DIRTY_INODE);
 
+#ifdef CONFIG_FUSE_BPF
+	iput(fi->backing_inode);
+	if (fi->bpf)
+		bpf_prog_put(fi->bpf);
+	fi->bpf = NULL;
+#endif
+
 	truncate_inode_pages_final(&inode->i_data);
 	clear_inode(inode);
 	if (inode->i_sb->s_flags & SB_ACTIVE) {
@@ -351,28 +362,105 @@ static void fuse_init_inode(struct inode *inode, struct fuse_attr *attr)
 	else if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode) ||
 		 S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) {
 		fuse_init_common(inode);
-		init_special_inode(inode, inode->i_mode,
-				   new_decode_dev(attr->rdev));
+		init_special_inode(inode, inode->i_mode, attr->rdev);
 	} else
 		BUG();
 }
 
+struct fuse_inode_identifier {
+	u64 nodeid;
+	struct inode *backing_inode;
+};
+
 static int fuse_inode_eq(struct inode *inode, void *_nodeidp)
 {
-	u64 nodeid = *(u64 *) _nodeidp;
-	if (get_node_id(inode) == nodeid)
-		return 1;
-	else
-		return 0;
+	struct fuse_inode_identifier *fii =
+		(struct fuse_inode_identifier *) _nodeidp;
+	struct fuse_inode *fi = get_fuse_inode(inode);
+
+	return fii->nodeid == fi->nodeid;
+}
+
+static int fuse_inode_backing_eq(struct inode *inode, void *_nodeidp)
+{
+	struct fuse_inode_identifier *fii =
+		(struct fuse_inode_identifier *) _nodeidp;
+	struct fuse_inode *fi = get_fuse_inode(inode);
+
+	return fii->nodeid == fi->nodeid
+#ifdef CONFIG_FUSE_BPF
+		&& fii->backing_inode == fi->backing_inode
+#endif
+		;
 }
 
 static int fuse_inode_set(struct inode *inode, void *_nodeidp)
 {
-	u64 nodeid = *(u64 *) _nodeidp;
-	get_fuse_inode(inode)->nodeid = nodeid;
+	struct fuse_inode_identifier *fii =
+		(struct fuse_inode_identifier *) _nodeidp;
+	struct fuse_inode *fi = get_fuse_inode(inode);
+
+	fi->nodeid = fii->nodeid;
+
+	return 0;
+}
+
+static int fuse_inode_backing_set(struct inode *inode, void *_nodeidp)
+{
+	struct fuse_inode_identifier *fii =
+		(struct fuse_inode_identifier *) _nodeidp;
+	struct fuse_inode *fi = get_fuse_inode(inode);
+
+	fi->nodeid = fii->nodeid;
+#ifdef CONFIG_FUSE_BPF
+	BUG_ON(fi->backing_inode != NULL);
+	fi->backing_inode = fii->backing_inode;
+	if (fi->backing_inode)
+		ihold(fi->backing_inode);
+#endif
+
 	return 0;
 }
 
+struct inode *fuse_iget_backing(struct super_block *sb, u64 nodeid,
+				struct inode *backing_inode)
+{
+	struct inode *inode;
+	struct fuse_inode *fi;
+	struct fuse_conn *fc = get_fuse_conn_super(sb);
+	struct fuse_inode_identifier fii = {
+		.nodeid = nodeid,
+		.backing_inode = backing_inode,
+	};
+	struct fuse_attr attr;
+	unsigned long hash = (unsigned long) backing_inode;
+
+	if (nodeid)
+		hash = nodeid;
+
+	fuse_fill_attr_from_inode(&attr, backing_inode);
+	inode = iget5_locked(sb, hash, fuse_inode_backing_eq,
+			     fuse_inode_backing_set, &fii);
+	if (!inode)
+		return NULL;
+
+	if ((inode->i_state & I_NEW)) {
+		inode->i_flags |= S_NOATIME;
+		if (!fc->writeback_cache)
+			inode->i_flags |= S_NOCMTIME;
+		fuse_init_common(inode);
+		unlock_new_inode(inode);
+	}
+
+	fi = get_fuse_inode(inode);
+	fuse_init_inode(inode, &attr);
+	spin_lock(&fi->lock);
+	fi->nlookup++;
+	spin_unlock(&fi->lock);
+
+	return inode;
+}
+
 struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
 			int generation, struct fuse_attr *attr,
 			u64 attr_valid, u64 attr_version)
@@ -380,6 +468,9 @@ struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
 	struct inode *inode;
 	struct fuse_inode *fi;
 	struct fuse_conn *fc = get_fuse_conn_super(sb);
+	struct fuse_inode_identifier fii = {
+		.nodeid = nodeid,
+	};
 
 	/*
 	 * Auto mount points get their node id from the submount root, which is
@@ -401,7 +492,7 @@ struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
 	}
 
 retry:
-	inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set, &nodeid);
+	inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set, &fii);
 	if (!inode)
 		return NULL;
 
@@ -433,13 +524,16 @@ struct inode *fuse_ilookup(struct fuse_conn *fc, u64 nodeid,
 {
 	struct fuse_mount *fm_iter;
 	struct inode *inode;
+	struct fuse_inode_identifier fii = {
+		.nodeid = nodeid,
+	};
 
 	WARN_ON(!rwsem_is_locked(&fc->killsb));
 	list_for_each_entry(fm_iter, &fc->mounts, fc_entry) {
 		if (!fm_iter->sb)
 			continue;
 
-		inode = ilookup5(fm_iter->sb, nodeid, fuse_inode_eq, &nodeid);
+		inode = ilookup5(fm_iter->sb, nodeid, fuse_inode_eq, &fii);
 		if (inode) {
 			if (fm)
 				*fm = fm_iter;
@@ -669,6 +763,8 @@ enum {
 	OPT_ALLOW_OTHER,
 	OPT_MAX_READ,
 	OPT_BLKSIZE,
+	OPT_ROOT_BPF,
+	OPT_ROOT_DIR,
 	OPT_ERR
 };
 
@@ -683,6 +779,8 @@ static const struct fs_parameter_spec fuse_fs_parameters[] = {
 	fsparam_u32	("max_read",		OPT_MAX_READ),
 	fsparam_u32	("blksize",		OPT_BLKSIZE),
 	fsparam_string	("subtype",		OPT_SUBTYPE),
+	fsparam_u32	("root_bpf",		OPT_ROOT_BPF),
+	fsparam_u32	("root_dir",		OPT_ROOT_DIR),
 	{}
 };
 
@@ -766,6 +864,21 @@ static int fuse_parse_param(struct fs_context *fsc, struct fs_parameter *param)
 		ctx->blksize = result.uint_32;
 		break;
 
+	case OPT_ROOT_BPF:
+		ctx->root_bpf = bpf_prog_get_type_dev(result.uint_32,
+						BPF_PROG_TYPE_FUSE, false);
+		if (IS_ERR(ctx->root_bpf)) {
+			ctx->root_bpf = NULL;
+			return invalfc(fsc, "Unable to open bpf program");
+		}
+		break;
+
+	case OPT_ROOT_DIR:
+		ctx->root_dir = fget(result.uint_32);
+		if (!ctx->root_dir)
+			return invalfc(fsc, "Unable to open root directory");
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -778,6 +891,10 @@ static void fuse_free_fsc(struct fs_context *fsc)
 	struct fuse_fs_context *ctx = fsc->fs_private;
 
 	if (ctx) {
+		if (ctx->root_dir)
+			fput(ctx->root_dir);
+		if (ctx->root_bpf)
+			bpf_prog_put(ctx->root_bpf);
 		kfree(ctx->subtype);
 		kfree(ctx);
 	}
@@ -905,15 +1022,34 @@ struct fuse_conn *fuse_conn_get(struct fuse_conn *fc)
 }
 EXPORT_SYMBOL_GPL(fuse_conn_get);
 
-static struct inode *fuse_get_root_inode(struct super_block *sb, unsigned mode)
+static struct inode *fuse_get_root_inode(struct super_block *sb,
+					 unsigned int mode,
+					 struct bpf_prog *root_bpf,
+					 struct file *backing_fd)
 {
 	struct fuse_attr attr;
-	memset(&attr, 0, sizeof(attr));
+	struct inode *inode;
 
+	memset(&attr, 0, sizeof(attr));
 	attr.mode = mode;
 	attr.ino = FUSE_ROOT_ID;
 	attr.nlink = 1;
-	return fuse_iget(sb, 1, 0, &attr, 0, 0);
+	inode = fuse_iget(sb, 1, 0, &attr, 0, 0);
+	if (!inode)
+		return NULL;
+
+#ifdef CONFIG_FUSE_BPF
+	get_fuse_inode(inode)->bpf = root_bpf;
+	if (root_bpf)
+		bpf_prog_inc(root_bpf);
+
+	if (backing_fd) {
+		get_fuse_inode(inode)->backing_inode = backing_fd->f_inode;
+		ihold(backing_fd->f_inode);
+	}
+#endif
+
+	return inode;
 }
 
 struct fuse_inode_handle {
@@ -928,11 +1064,14 @@ static struct dentry *fuse_get_dentry(struct super_block *sb,
 	struct inode *inode;
 	struct dentry *entry;
 	int err = -ESTALE;
+	struct fuse_inode_identifier fii = {
+		.nodeid = handle->nodeid,
+	};
 
 	if (handle->nodeid == 0)
 		goto out_err;
 
-	inode = ilookup5(sb, handle->nodeid, fuse_inode_eq, &handle->nodeid);
+	inode = ilookup5(sb, handle->nodeid, fuse_inode_eq, &fii);
 	if (!inode) {
 		struct fuse_entry_out outarg;
 		const struct qstr name = QSTR_INIT(".", 1);
@@ -941,7 +1080,7 @@ static struct dentry *fuse_get_dentry(struct super_block *sb,
 			goto out_err;
 
 		err = fuse_lookup_name(sb, handle->nodeid, &name, &outarg,
-				       &inode);
+				       NULL, &inode);
 		if (err && err != -ENOENT)
 			goto out_err;
 		if (err || !inode) {
@@ -1035,13 +1174,14 @@ static struct dentry *fuse_get_parent(struct dentry *child)
 	struct inode *inode;
 	struct dentry *parent;
 	struct fuse_entry_out outarg;
+	const struct qstr name = QSTR_INIT("..", 2);
 	int err;
 
 	if (!fc->export_support)
 		return ERR_PTR(-ESTALE);
 
 	err = fuse_lookup_name(child_inode->i_sb, get_node_id(child_inode),
-			       &dotdot_name, &outarg, &inode);
+			       &name, &outarg, NULL, &inode);
 	if (err) {
 		if (err == -ENOENT)
 			return ERR_PTR(-ESTALE);
@@ -1580,11 +1720,13 @@ int fuse_fill_super_common(struct super_block *sb, struct fuse_fs_context *ctx)
 	fc->no_force_umount = ctx->no_force_umount;
 
 	err = -ENOMEM;
-	root = fuse_get_root_inode(sb, ctx->rootmode);
+	root = fuse_get_root_inode(sb, ctx->rootmode, ctx->root_bpf,
+				   ctx->root_dir);
 	sb->s_d_op = &fuse_root_dentry_operations;
 	root_dentry = d_make_root(root);
 	if (!root_dentry)
 		goto err_dev_free;
+	fuse_init_dentry_root(root_dentry, ctx->root_dir);
 	/* Root dentry doesn't have .d_revalidate */
 	sb->s_d_op = &fuse_dentry_operations;
 
diff --git a/fs/fuse/ioctl.c b/fs/fuse/ioctl.c
index 61d8afcb10a3..8bc8d50917e2 100644
--- a/fs/fuse/ioctl.c
+++ b/fs/fuse/ioctl.c
@@ -422,7 +422,7 @@ static struct fuse_file *fuse_priv_ioctl_prepare(struct inode *inode)
 	if (!S_ISREG(inode->i_mode) && !isdir)
 		return ERR_PTR(-ENOTTY);
 
-	return fuse_file_open(fm, get_node_id(inode), O_RDONLY, isdir);
+	return fuse_file_open(fm, get_node_id(inode), O_RDONLY, isdir, NULL);
 }
 
 static void fuse_priv_ioctl_cleanup(struct inode *inode, struct fuse_file *ff)
diff --git a/include/linux/bpf_fuse.h b/include/linux/bpf_fuse.h
index 91b60d4e78b1..ef5c8fdaffee 100644
--- a/include/linux/bpf_fuse.h
+++ b/include/linux/bpf_fuse.h
@@ -31,6 +31,7 @@ struct bpf_fuse_arg {
 
 #define FUSE_BPF_FORCE (1 << 0)
 #define FUSE_BPF_OUT_ARGVAR (1 << 6)
+#define FUSE_BPF_IS_LOOKUP (1 << 11)
 
 struct bpf_fuse_args {
 	uint64_t nodeid;
-- 
2.37.3.998.g577e59143f-goog

[PATCH 09/26] fuse-bpf: Don't support export_operations

[Daniel Rosenberg]

In the future, we may choose to support these, but it poses some
challenges. In order to create a disconnected dentry/inode, we'll need
to encode the mountpoint and bpf into the file_handle, which means we'd
need a stable representation of them. This also won't hold up to cases
where the bpf is not stateless. One possibility is registering bpf
programs and mounts in a specific order, so they can be assigned
consistent ids we can use in the file_handle. We can defer to the lower
filesystem for the lower inode's representation in the file_handle.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/inode.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index ca65199b38cb..290eae750282 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -1122,6 +1122,14 @@ static int fuse_encode_fh(struct inode *inode, u32 *fh, int *max_len,
 	nodeid = get_fuse_inode(inode)->nodeid;
 	generation = inode->i_generation;
 
+#ifdef CONFIG_FUSE_BPF
+	/* TODO: Does it make sense to support this in some cases? */
+	if (!nodeid && get_fuse_inode(inode)->backing_inode) {
+		*max_len = 0;
+		return FILEID_INVALID;
+	}
+#endif
+
 	fh[0] = (u32)(nodeid >> 32);
 	fh[1] = (u32)(nodeid & 0xffffffff);
 	fh[2] = generation;
-- 
2.37.3.998.g577e59143f-goog

[PATCH 10/26] fuse-bpf: Partially add mapping support

[Daniel Rosenberg]

This adds a backing implementation for mapping, but no bpf counterpart
yet.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c | 37 +++++++++++++++++++++++++++++++++++++
 fs/fuse/file.c    |  6 ++++++
 fs/fuse/fuse_i.h  |  3 +++
 3 files changed, 46 insertions(+)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index 51088701e7ad..fa8805e24061 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -77,6 +77,43 @@ int parse_fuse_entry_bpf(struct fuse_entry_bpf *feb)
 	return err;
 }
 
+ssize_t fuse_backing_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	int ret;
+	struct fuse_file *ff = file->private_data;
+	struct inode *fuse_inode = file_inode(file);
+	struct file *backing_file = ff->backing_file;
+	struct inode *backing_inode = file_inode(backing_file);
+
+	if (!backing_file->f_op->mmap)
+		return -ENODEV;
+
+	if (WARN_ON(file != vma->vm_file))
+		return -EIO;
+
+	vma->vm_file = get_file(backing_file);
+
+	ret = call_mmap(vma->vm_file, vma);
+
+	if (ret)
+		fput(backing_file);
+	else
+		fput(file);
+
+	if (file->f_flags & O_NOATIME)
+		return ret;
+
+	if ((!timespec64_equal(&fuse_inode->i_mtime, &backing_inode->i_mtime) ||
+	     !timespec64_equal(&fuse_inode->i_ctime,
+			       &backing_inode->i_ctime))) {
+		fuse_inode->i_mtime = backing_inode->i_mtime;
+		fuse_inode->i_ctime = backing_inode->i_ctime;
+	}
+	touch_atime(&file->f_path);
+
+	return ret;
+}
+
 /*******************************************************************************
  * Directory operations after here                                             *
  ******************************************************************************/
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 4fa2ebc068f0..138890eae07c 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -2452,6 +2452,12 @@ static int fuse_file_mmap(struct file *file, struct vm_area_struct *vma)
 	if (FUSE_IS_DAX(file_inode(file)))
 		return fuse_dax_mmap(file, vma);
 
+#ifdef CONFIG_FUSE_BPF
+	/* TODO - this is simply passthrough, not a proper BPF filter */
+	if (ff->backing_file)
+		return fuse_backing_mmap(file, vma);
+#endif
+
 	if (ff->open_flags & FOPEN_DIRECT_IO) {
 		/* Can't provide the coherency needed for MAP_SHARED */
 		if (vma->vm_flags & VM_MAYSHARE)
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 30ddc298fb27..a9653f71c145 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1404,8 +1404,11 @@ struct fuse_entry_bpf {
 	struct bpf_prog *bpf;
 };
 
+
 int parse_fuse_entry_bpf(struct fuse_entry_bpf *feb);
 
+ssize_t fuse_backing_mmap(struct file *file, struct vm_area_struct *vma);
+
 struct fuse_lookup_io {
 	struct fuse_entry_out feo;
 	struct fuse_entry_bpf feb;
-- 
2.37.3.998.g577e59143f-goog

[PATCH 11/26] fuse-bpf: Add lseek support

[Daniel Rosenberg]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c | 74 +++++++++++++++++++++++++++++++++++++++++++++++
 fs/fuse/file.c    |  8 +++++
 fs/fuse/fuse_i.h  | 15 +++++++++-
 3 files changed, 96 insertions(+), 1 deletion(-)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index fa8805e24061..97e92c633cfd 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -77,6 +77,80 @@ int parse_fuse_entry_bpf(struct fuse_entry_bpf *feb)
 	return err;
 }
 
+int fuse_lseek_initialize_in(struct bpf_fuse_args *fa, struct fuse_lseek_io *flio,
+			     struct file *file, loff_t offset, int whence)
+{
+	struct fuse_file *fuse_file = file->private_data;
+
+	flio->fli = (struct fuse_lseek_in) {
+		.fh = fuse_file->fh,
+		.offset = offset,
+		.whence = whence,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(file->f_inode),
+		.opcode = FUSE_LSEEK,
+		.in_numargs = 1,
+		.in_args[0].size = sizeof(flio->fli),
+		.in_args[0].value = &flio->fli,
+	};
+
+	return 0;
+}
+
+int fuse_lseek_initialize_out(struct bpf_fuse_args *fa, struct fuse_lseek_io *flio,
+			      struct file *file, loff_t offset, int whence)
+{
+	fa->out_numargs = 1;
+	fa->out_args[0].size = sizeof(flio->flo);
+	fa->out_args[0].value = &flio->flo;
+
+	return 0;
+}
+
+int fuse_lseek_backing(struct bpf_fuse_args *fa, loff_t *out,
+		       struct file *file, loff_t offset, int whence)
+{
+	const struct fuse_lseek_in *fli = fa->in_args[0].value;
+	struct fuse_lseek_out *flo = fa->out_args[0].value;
+	struct fuse_file *fuse_file = file->private_data;
+	struct file *backing_file = fuse_file->backing_file;
+
+	/* TODO: Handle changing of the file handle */
+	if (offset == 0) {
+		if (whence == SEEK_CUR) {
+			flo->offset = file->f_pos;
+			*out = flo->offset;
+			return 0;
+		}
+
+		if (whence == SEEK_SET) {
+			flo->offset = vfs_setpos(file, 0, 0);
+			*out = flo->offset;
+			return 0;
+		}
+	}
+
+	inode_lock(file->f_inode);
+	backing_file->f_pos = file->f_pos;
+	*out = vfs_llseek(backing_file, fli->offset, fli->whence);
+	flo->offset = *out;
+	inode_unlock(file->f_inode);
+	return 0;
+}
+
+int fuse_lseek_finalize(struct bpf_fuse_args *fa, loff_t *out,
+			struct file *file, loff_t offset, int whence)
+{
+	struct fuse_lseek_out *flo = fa->out_args[0].value;
+
+	if (!fa->error_in)
+		file->f_pos = flo->offset;
+	*out = flo->offset;
+	return 0;
+}
+
 ssize_t fuse_backing_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	int ret;
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 138890eae07c..dd4485261cc7 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -2703,6 +2703,14 @@ static loff_t fuse_file_llseek(struct file *file, loff_t offset, int whence)
 {
 	loff_t retval;
 	struct inode *inode = file_inode(file);
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(inode, struct fuse_lseek_io, retval,
+			       fuse_lseek_initialize_in, fuse_lseek_initialize_out,
+			       fuse_lseek_backing,
+			       fuse_lseek_finalize,
+			       file, offset, whence))
+		return retval;
+#endif
 
 	switch (whence) {
 	case SEEK_SET:
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index a9653f71c145..fc3e8adf0422 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1404,9 +1404,22 @@ struct fuse_entry_bpf {
 	struct bpf_prog *bpf;
 };
 
-
 int parse_fuse_entry_bpf(struct fuse_entry_bpf *feb);
 
+struct fuse_lseek_io {
+	struct fuse_lseek_in fli;
+	struct fuse_lseek_out flo;
+};
+
+int fuse_lseek_initialize_in(struct bpf_fuse_args *fa, struct fuse_lseek_io *fli,
+			     struct file *file, loff_t offset, int whence);
+int fuse_lseek_initialize_out(struct bpf_fuse_args *fa, struct fuse_lseek_io *fli,
+			      struct file *file, loff_t offset, int whence);
+int fuse_lseek_backing(struct bpf_fuse_args *fa, loff_t *out, struct file *file,
+		       loff_t offset, int whence);
+int fuse_lseek_finalize(struct bpf_fuse_args *fa, loff_t *out, struct file *file,
+			loff_t offset, int whence);
+
 ssize_t fuse_backing_mmap(struct file *file, struct vm_area_struct *vma);
 
 struct fuse_lookup_io {
-- 
2.37.3.998.g577e59143f-goog

[PATCH 12/26] fuse-bpf: Add support for fallocate

[Daniel Rosenberg]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
 fs/fuse/file.c    | 10 ++++++++++
 fs/fuse/fuse_i.h  | 11 +++++++++++
 3 files changed, 69 insertions(+)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index 97e92c633cfd..95c60d6d7597 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -188,6 +188,54 @@ ssize_t fuse_backing_mmap(struct file *file, struct vm_area_struct *vma)
 	return ret;
 }
 
+int fuse_file_fallocate_initialize_in(struct bpf_fuse_args *fa,
+				      struct fuse_fallocate_in *ffi,
+				      struct file *file, int mode, loff_t offset, loff_t length)
+{
+	struct fuse_file *ff = file->private_data;
+
+	*ffi = (struct fuse_fallocate_in) {
+		.fh = ff->fh,
+		.offset = offset,
+		.length = length,
+		.mode = mode,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.opcode = FUSE_FALLOCATE,
+		.nodeid = ff->nodeid,
+		.in_numargs = 1,
+		.in_args[0].size = sizeof(*ffi),
+		.in_args[0].value = ffi,
+	};
+
+	return 0;
+}
+
+int fuse_file_fallocate_initialize_out(struct bpf_fuse_args *fa,
+				       struct fuse_fallocate_in *ffi,
+				       struct file *file, int mode, loff_t offset, loff_t length)
+{
+	return 0;
+}
+
+int fuse_file_fallocate_backing(struct bpf_fuse_args *fa, int *out,
+				struct file *file, int mode, loff_t offset, loff_t length)
+{
+	const struct fuse_fallocate_in *ffi = fa->in_args[0].value;
+	struct fuse_file *ff = file->private_data;
+
+	*out = vfs_fallocate(ff->backing_file, ffi->mode, ffi->offset,
+			     ffi->length);
+	return 0;
+}
+
+int fuse_file_fallocate_finalize(struct bpf_fuse_args *fa, int *out,
+				 struct file *file, int mode, loff_t offset, loff_t length)
+{
+	return 0;
+}
+
 /*******************************************************************************
  * Directory operations after here                                             *
  ******************************************************************************/
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index dd4485261cc7..ef6f6b0b3b59 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -3002,6 +3002,16 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset,
 
 	bool block_faults = FUSE_IS_DAX(inode) && lock_inode;
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(inode, struct fuse_fallocate_in, err,
+			       fuse_file_fallocate_initialize_in,
+			       fuse_file_fallocate_initialize_out,
+			       fuse_file_fallocate_backing,
+			       fuse_file_fallocate_finalize,
+			       file, mode, offset, length))
+		return err;
+#endif
+
 	if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |
 		     FALLOC_FL_ZERO_RANGE))
 		return -EOPNOTSUPP;
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index fc3e8adf0422..0e4996766c6c 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1422,6 +1422,17 @@ int fuse_lseek_finalize(struct bpf_fuse_args *fa, loff_t *out, struct file *file
 
 ssize_t fuse_backing_mmap(struct file *file, struct vm_area_struct *vma);
 
+int fuse_file_fallocate_initialize_in(struct bpf_fuse_args *fa,
+				      struct fuse_fallocate_in *ffi,
+				      struct file *file, int mode, loff_t offset, loff_t length);
+int fuse_file_fallocate_initialize_out(struct bpf_fuse_args *fa,
+				       struct fuse_fallocate_in *ffi,
+				       struct file *file, int mode, loff_t offset, loff_t length);
+int fuse_file_fallocate_backing(struct bpf_fuse_args *fa, int *out,
+				struct file *file, int mode, loff_t offset, loff_t length);
+int fuse_file_fallocate_finalize(struct bpf_fuse_args *fa, int *out,
+				 struct file *file, int mode, loff_t offset, loff_t length);
+
 struct fuse_lookup_io {
 	struct fuse_entry_out feo;
 	struct fuse_entry_bpf feb;
-- 
2.37.3.998.g577e59143f-goog

[PATCH 13/26] fuse-bpf: Support file/dir open/close

[Daniel Rosenberg]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c | 318 ++++++++++++++++++++++++++++++++++++++++++++++
 fs/fuse/dir.c     |  21 +++
 fs/fuse/file.c    |  21 +++
 fs/fuse/fuse_i.h  |  48 +++++++
 4 files changed, 408 insertions(+)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index 95c60d6d7597..1a2a89ddd535 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -77,6 +77,324 @@ int parse_fuse_entry_bpf(struct fuse_entry_bpf *feb)
 	return err;
 }
 
+int fuse_open_initialize_in(struct bpf_fuse_args *fa, struct fuse_open_io *foio,
+			    struct inode *inode, struct file *file, bool isdir)
+{
+	foio->foi = (struct fuse_open_in) {
+		.flags = file->f_flags & ~(O_CREAT | O_EXCL | O_NOCTTY),
+	};
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_fuse_inode(inode)->nodeid,
+		.opcode = isdir ? FUSE_OPENDIR : FUSE_OPEN,
+		.in_numargs = 1,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = sizeof(foio->foi),
+			.value = &foio->foi,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_open_initialize_out(struct bpf_fuse_args *fa, struct fuse_open_io *foio,
+			     struct inode *inode, struct file *file, bool isdir)
+{
+	foio->foo = (struct fuse_open_out) { 0 };
+
+	fa->out_numargs = 1;
+	fa->out_args[0] = (struct bpf_fuse_arg) {
+		.size = sizeof(foio->foo),
+		.value = &foio->foo,
+	};
+
+	return 0;
+}
+
+int fuse_open_backing(struct bpf_fuse_args *fa, int *out,
+		      struct inode *inode, struct file *file, bool isdir)
+{
+	struct fuse_mount *fm = get_fuse_mount(inode);
+	const struct fuse_open_in *foi = fa->in_args[0].value;
+	struct fuse_file *ff;
+	int mask;
+	struct fuse_dentry *fd = get_fuse_dentry(file->f_path.dentry);
+	struct file *backing_file;
+
+	ff = fuse_file_alloc(fm);
+	if (!ff)
+		return -ENOMEM;
+	file->private_data = ff;
+
+	switch (foi->flags & O_ACCMODE) {
+	case O_RDONLY:
+		mask = MAY_READ;
+		break;
+
+	case O_WRONLY:
+		mask = MAY_WRITE;
+		break;
+
+	case O_RDWR:
+		mask = MAY_READ | MAY_WRITE;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	*out = inode_permission(&init_user_ns,
+				  get_fuse_inode(inode)->backing_inode, mask);
+	if (*out)
+		return *out;
+
+	backing_file =
+		dentry_open(&fd->backing_path, foi->flags, current_cred());
+
+	if (IS_ERR(backing_file)) {
+		fuse_file_free(ff);
+		file->private_data = NULL;
+		return PTR_ERR(backing_file);
+	}
+	ff->backing_file = backing_file;
+
+	*out = 0;
+	return 0;
+}
+
+int fuse_open_finalize(struct bpf_fuse_args *fa, int *out,
+		       struct inode *inode, struct file *file, bool isdir)
+{
+	struct fuse_file *ff = file->private_data;
+	struct fuse_open_out *foo = fa->out_args[0].value;
+
+	if (ff)
+		ff->fh = foo->fh;
+	return 0;
+}
+
+int fuse_create_open_initialize_in(struct bpf_fuse_args *fa, struct fuse_create_open_io *fcoio,
+				   struct inode *dir, struct dentry *entry,
+				   struct file *file, unsigned int flags, umode_t mode)
+{
+	fcoio->fci = (struct fuse_create_in) {
+		.flags = file->f_flags & ~(O_CREAT | O_EXCL | O_NOCTTY),
+		.mode = mode,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(dir),
+		.opcode = FUSE_CREATE,
+		.in_numargs = 2,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = sizeof(fcoio->fci),
+			.value = &fcoio->fci,
+		},
+		.in_args[1] = (struct bpf_fuse_arg) {
+			.size = entry->d_name.len + 1,
+			.flags = BPF_FUSE_IMMUTABLE,
+			.value =  (void *) entry->d_name.name,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_create_open_initialize_out(struct bpf_fuse_args *fa, struct fuse_create_open_io *fcoio,
+				    struct inode *dir, struct dentry *entry,
+				    struct file *file, unsigned int flags, umode_t mode)
+{
+	fcoio->feo = (struct fuse_entry_out) { 0 };
+	fcoio->foo = (struct fuse_open_out) { 0 };
+
+	fa->out_numargs = 2;
+	fa->out_args[0] = (struct bpf_fuse_arg) {
+		.size = sizeof(fcoio->feo),
+		.value = &fcoio->feo,
+	};
+	fa->out_args[1] = (struct bpf_fuse_arg) {
+		.size = sizeof(fcoio->foo),
+		.value = &fcoio->foo,
+	};
+
+	return 0;
+}
+
+static int fuse_open_file_backing(struct inode *inode, struct file *file)
+{
+	struct fuse_mount *fm = get_fuse_mount(inode);
+	struct dentry *entry = file->f_path.dentry;
+	struct fuse_dentry *fuse_dentry = get_fuse_dentry(entry);
+	struct fuse_file *fuse_file;
+	struct file *backing_file;
+
+	fuse_file = fuse_file_alloc(fm);
+	if (!fuse_file)
+		return -ENOMEM;
+	file->private_data = fuse_file;
+
+	backing_file = dentry_open(&fuse_dentry->backing_path, file->f_flags,
+				   current_cred());
+	if (IS_ERR(backing_file)) {
+		fuse_file_free(fuse_file);
+		file->private_data = NULL;
+		return PTR_ERR(backing_file);
+	}
+	fuse_file->backing_file = backing_file;
+
+	return 0;
+}
+
+int fuse_create_open_backing(struct bpf_fuse_args *fa, int *out,
+			     struct inode *dir, struct dentry *entry,
+			     struct file *file, unsigned int flags, umode_t mode)
+{
+	struct fuse_inode *dir_fuse_inode = get_fuse_inode(dir);
+	struct path backing_path;
+	struct inode *inode = NULL;
+	struct dentry *backing_parent;
+	struct dentry *newent;
+	const struct fuse_create_in *fci = fa->in_args[0].value;
+
+	get_fuse_backing_path(entry, &backing_path);
+	if (!backing_path.dentry)
+		return -EBADF;
+
+	if (!dir_fuse_inode)
+		return -EIO;
+
+	if (IS_ERR(backing_path.dentry))
+		return PTR_ERR(backing_path.dentry);
+
+	if (d_really_is_positive(backing_path.dentry)) {
+		*out = -EIO;
+		goto out;
+	}
+
+	backing_parent = dget_parent(backing_path.dentry);
+	inode_lock_nested(dir_fuse_inode->backing_inode, I_MUTEX_PARENT);
+	*out = vfs_create(&init_user_ns, d_inode(backing_parent),
+			backing_path.dentry, fci->mode, true);
+	inode_unlock(d_inode(backing_parent));
+	dput(backing_parent);
+	if (*out)
+		goto out;
+
+	inode = fuse_iget_backing(dir->i_sb, 0, backing_path.dentry->d_inode);
+	if (IS_ERR(inode)) {
+		*out = PTR_ERR(inode);
+		goto out;
+	}
+
+	if (get_fuse_inode(inode)->bpf)
+		bpf_prog_put(get_fuse_inode(inode)->bpf);
+	get_fuse_inode(inode)->bpf = dir_fuse_inode->bpf;
+	if (get_fuse_inode(inode)->bpf)
+		bpf_prog_inc(dir_fuse_inode->bpf);
+
+	newent = d_splice_alias(inode, entry);
+	if (IS_ERR(newent)) {
+		*out = PTR_ERR(newent);
+		goto out;
+	}
+
+	entry = newent ? newent : entry;
+	*out = finish_open(file, entry, fuse_open_file_backing);
+
+out:
+	path_put(&backing_path);
+	return *out;
+}
+
+int fuse_create_open_finalize(struct bpf_fuse_args *fa, int *out,
+				struct inode *dir, struct dentry *entry,
+				struct file *file, unsigned int flags, umode_t mode)
+{
+	struct fuse_file *ff = file->private_data;
+	struct fuse_inode *fi = get_fuse_inode(file->f_inode);
+	struct fuse_entry_out *feo = fa->out_args[0].value;
+	struct fuse_open_out *foo = fa->out_args[1].value;
+
+	if (fi)
+		fi->nodeid = feo->nodeid;
+	if (ff)
+		ff->fh = foo->fh;
+	return 0;
+}
+
+int fuse_release_initialize_in(struct bpf_fuse_args *fa, struct fuse_release_in *fri,
+			       struct inode *inode, struct file *file)
+{
+	struct fuse_file *fuse_file = file->private_data;
+
+	/* Always put backing file whatever bpf/userspace says */
+	fput(fuse_file->backing_file);
+
+	*fri = (struct fuse_release_in) {
+		.fh = ((struct fuse_file *)(file->private_data))->fh,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_fuse_inode(inode)->nodeid,
+		.opcode = FUSE_RELEASE,
+		.in_numargs = 1,
+		.in_args[0].size = sizeof(*fri),
+		.in_args[0].value = fri,
+	};
+
+	return 0;
+}
+
+int fuse_release_initialize_out(struct bpf_fuse_args *fa, struct fuse_release_in *fri,
+				struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+int fuse_releasedir_initialize_in(struct bpf_fuse_args *fa,
+				  struct fuse_release_in *fri,
+				  struct inode *inode, struct file *file)
+{
+	struct fuse_file *fuse_file = file->private_data;
+
+	/* Always put backing file whatever bpf/userspace says */
+	fput(fuse_file->backing_file);
+
+	*fri = (struct fuse_release_in) {
+		.fh = ((struct fuse_file *)(file->private_data))->fh,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_fuse_inode(inode)->nodeid,
+		.opcode = FUSE_RELEASEDIR,
+		.in_numargs = 1,
+		.in_args[0].size = sizeof(*fri),
+		.in_args[0].value = fri,
+	};
+
+	return 0;
+}
+
+int fuse_releasedir_initialize_out(struct bpf_fuse_args *fa,
+				   struct fuse_release_in *fri,
+				   struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+int fuse_release_backing(struct bpf_fuse_args *fa, int *out,
+			 struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+int fuse_release_finalize(struct bpf_fuse_args *fa, int *out,
+			  struct inode *inode, struct file *file)
+{
+	fuse_file_free(file->private_data);
+	*out = 0;
+	return 0;
+}
+
 int fuse_lseek_initialize_in(struct bpf_fuse_args *fa, struct fuse_lseek_io *flio,
 			     struct file *file, loff_t offset, int whence)
 {
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index daaf3576fab9..a89690662b3b 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -652,6 +652,18 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry,
 	/* Userspace expects S_IFREG in create mode */
 	BUG_ON((mode & S_IFMT) != S_IFREG);
 
+#ifdef CONFIG_FUSE_BPF
+	{
+		if (fuse_bpf_backing(dir, struct fuse_create_open_io, err,
+				       fuse_create_open_initialize_in,
+				       fuse_create_open_initialize_out,
+				       fuse_create_open_backing,
+				       fuse_create_open_finalize,
+				       dir, entry, file, flags, mode))
+			return err;
+	}
+#endif
+
 	forget = fuse_alloc_forget();
 	err = -ENOMEM;
 	if (!forget)
@@ -1562,6 +1574,15 @@ static int fuse_dir_open(struct inode *inode, struct file *file)
 
 static int fuse_dir_release(struct inode *inode, struct file *file)
 {
+#ifdef CONFIG_FUSE_BPF
+	int err = 0;
+
+	if (fuse_bpf_backing(inode, struct fuse_release_in, err,
+		       fuse_releasedir_initialize_in, fuse_releasedir_initialize_out,
+		       fuse_release_backing, fuse_release_finalize, inode, file))
+		return err;
+#endif
+
 	fuse_release_common(file, true);
 
 	return 0;
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index ef6f6b0b3b59..7feb73274c3e 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -241,6 +241,17 @@ int fuse_open_common(struct inode *inode, struct file *file, bool isdir)
 	if (err)
 		return err;
 
+#ifdef CONFIG_FUSE_BPF
+	{
+		if (fuse_bpf_backing(inode, struct fuse_open_io, err,
+				       fuse_open_initialize_in, fuse_open_initialize_out,
+				       fuse_open_backing,
+				       fuse_open_finalize,
+				       inode, file, isdir))
+			return err;
+	}
+#endif
+
 	if (is_wb_truncate || dax_truncate)
 		inode_lock(inode);
 
@@ -350,6 +361,16 @@ static int fuse_release(struct inode *inode, struct file *file)
 {
 	struct fuse_conn *fc = get_fuse_conn(inode);
 
+#ifdef CONFIG_FUSE_BPF
+	int err;
+
+	if (fuse_bpf_backing(inode, struct fuse_release_in, err,
+		       fuse_release_initialize_in, fuse_release_initialize_out,
+		       fuse_release_backing, fuse_release_finalize,
+		       inode, file))
+		return err;
+#endif
+
 	/*
 	 * Dirty pages might remain despite write_inode_now() call from
 	 * fuse_flush() due to writes racing with the close.
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 0e4996766c6c..f36a00e30c3f 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1406,6 +1406,54 @@ struct fuse_entry_bpf {
 
 int parse_fuse_entry_bpf(struct fuse_entry_bpf *feb);
 
+struct fuse_open_io {
+	struct fuse_open_in foi;
+	struct fuse_open_out foo;
+};
+
+int fuse_open_initialize_in(struct bpf_fuse_args *fa, struct fuse_open_io *foi,
+			    struct inode *inode, struct file *file, bool isdir);
+int fuse_open_initialize_out(struct bpf_fuse_args *fa, struct fuse_open_io *foi,
+			     struct inode *inode, struct file *file, bool isdir);
+int fuse_open_backing(struct bpf_fuse_args *fa, int *out,
+		      struct inode *inode, struct file *file, bool isdir);
+int fuse_open_finalize(struct bpf_fuse_args *fa, int *out,
+			 struct inode *inode, struct file *file, bool isdir);
+
+struct fuse_create_open_io {
+	struct fuse_create_in fci;
+	struct fuse_entry_out feo;
+	struct fuse_open_out foo;
+};
+
+int fuse_create_open_initialize_in(struct bpf_fuse_args *fa, struct fuse_create_open_io *fcoi,
+				   struct inode *dir, struct dentry *entry,
+				   struct file *file, unsigned int flags, umode_t mode);
+int fuse_create_open_initialize_out(struct bpf_fuse_args *fa, struct fuse_create_open_io *fcoi,
+				    struct inode *dir, struct dentry *entry,
+				    struct file *file, unsigned int flags, umode_t mode);
+int fuse_create_open_backing(struct bpf_fuse_args *fa, int *out,
+			     struct inode *dir, struct dentry *entry,
+			     struct file *file, unsigned int flags, umode_t mode);
+int fuse_create_open_finalize(struct bpf_fuse_args *fa, int *out,
+			      struct inode *dir, struct dentry *entry,
+			      struct file *file, unsigned int flags, umode_t mode);
+
+int fuse_release_initialize_in(struct bpf_fuse_args *fa, struct fuse_release_in *fri,
+			       struct inode *inode, struct file *file);
+int fuse_release_initialize_out(struct bpf_fuse_args *fa, struct fuse_release_in *fri,
+				struct inode *inode, struct file *file);
+int fuse_releasedir_initialize_in(struct bpf_fuse_args *fa,
+				  struct fuse_release_in *fri,
+				  struct inode *inode, struct file *file);
+int fuse_releasedir_initialize_out(struct bpf_fuse_args *fa,
+				   struct fuse_release_in *fri,
+				   struct inode *inode, struct file *file);
+int fuse_release_backing(struct bpf_fuse_args *fa, int *out,
+			 struct inode *inode, struct file *file);
+int fuse_release_finalize(struct bpf_fuse_args *fa, int *out,
+			    struct inode *inode, struct file *file);
+
 struct fuse_lseek_io {
 	struct fuse_lseek_in fli;
 	struct fuse_lseek_out flo;
-- 
2.37.3.998.g577e59143f-goog

[PATCH 14/26] fuse-bpf: Support mknod/unlink/mkdir/rmdir

[Daniel Rosenberg]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c | 271 ++++++++++++++++++++++++++++++++++++++++++++++
 fs/fuse/dir.c     |  40 +++++++
 fs/fuse/fuse_i.h  |  35 ++++++
 3 files changed, 346 insertions(+)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index 1a2a89ddd535..1fe61177cdfb 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -765,6 +765,277 @@ int fuse_revalidate_backing(struct dentry *entry, unsigned int flags)
 	return 1;
 }
 
+int fuse_mknod_initialize_in(struct bpf_fuse_args *fa, struct fuse_mknod_in *fmi,
+			     struct inode *dir, struct dentry *entry, umode_t mode, dev_t rdev)
+{
+	*fmi = (struct fuse_mknod_in) {
+		.mode = mode,
+		.rdev = new_encode_dev(rdev),
+		.umask = current_umask(),
+	};
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(dir),
+		.opcode = FUSE_MKNOD,
+		.in_numargs = 2,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = sizeof(*fmi),
+			.value = fmi,
+		},
+		.in_args[1] = (struct bpf_fuse_arg) {
+			.size = entry->d_name.len + 1,
+			.flags = BPF_FUSE_IMMUTABLE,
+			.value =  (void *) entry->d_name.name,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_mknod_initialize_out(struct bpf_fuse_args *fa, struct fuse_mknod_in *fmi,
+			      struct inode *dir, struct dentry *entry, umode_t mode, dev_t rdev)
+{
+	return 0;
+}
+
+int fuse_mknod_backing(struct bpf_fuse_args *fa, int *out,
+		       struct inode *dir, struct dentry *entry, umode_t mode, dev_t rdev)
+{
+	const struct fuse_mknod_in *fmi = fa->in_args[0].value;
+	struct fuse_inode *fuse_inode = get_fuse_inode(dir);
+	struct inode *backing_inode = fuse_inode->backing_inode;
+	struct path backing_path;
+	struct inode *inode = NULL;
+
+	get_fuse_backing_path(entry, &backing_path);
+	if (!backing_path.dentry)
+		return -EBADF;
+
+	inode_lock_nested(backing_inode, I_MUTEX_PARENT);
+	mode = fmi->mode;
+	if (!IS_POSIXACL(backing_inode))
+		mode &= ~fmi->umask;
+	*out = vfs_mknod(&init_user_ns, backing_inode, backing_path.dentry, mode,
+			new_decode_dev(fmi->rdev));
+	inode_unlock(backing_inode);
+	if (*out)
+		goto out;
+	if (d_really_is_negative(backing_path.dentry) ||
+	    unlikely(d_unhashed(backing_path.dentry))) {
+		*out = -EINVAL;
+		/**
+		 * TODO: overlayfs responds to this situation with a
+		 * lookupOneLen. Should we do that too?
+		 */
+		goto out;
+	}
+	inode = fuse_iget_backing(dir->i_sb, fuse_inode->nodeid, backing_inode);
+	if (IS_ERR(inode)) {
+		*out = PTR_ERR(inode);
+		goto out;
+	}
+	d_instantiate(entry, inode);
+out:
+	path_put(&backing_path);
+	return *out;
+}
+
+int fuse_mknod_finalize(struct bpf_fuse_args *fa, int *out,
+			  struct inode *dir, struct dentry *entry, umode_t mode, dev_t rdev)
+{
+	return 0;
+}
+
+int fuse_mkdir_initialize_in(struct bpf_fuse_args *fa, struct fuse_mkdir_in *fmi,
+			     struct inode *dir, struct dentry *entry, umode_t mode)
+{
+	*fmi = (struct fuse_mkdir_in) {
+		.mode = mode,
+		.umask = current_umask(),
+	};
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(dir),
+		.opcode = FUSE_MKDIR,
+		.in_numargs = 2,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = sizeof(*fmi),
+			.value = fmi,
+		},
+		.in_args[1] = (struct bpf_fuse_arg) {
+			.size = entry->d_name.len + 1,
+			.flags = BPF_FUSE_IMMUTABLE,
+			.value =  (void *) entry->d_name.name,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_mkdir_initialize_out(struct bpf_fuse_args *fa, struct fuse_mkdir_in *fmi,
+			      struct inode *dir, struct dentry *entry, umode_t mode)
+{
+	return 0;
+}
+
+int fuse_mkdir_backing(struct bpf_fuse_args *fa, int *out,
+		       struct inode *dir, struct dentry *entry, umode_t mode)
+{
+	const struct fuse_mkdir_in *fmi = fa->in_args[0].value;
+	struct fuse_inode *fuse_inode = get_fuse_inode(dir);
+	struct inode *backing_inode = fuse_inode->backing_inode;
+	struct path backing_path;
+	struct inode *inode = NULL;
+	struct dentry *d;
+
+	get_fuse_backing_path(entry, &backing_path);
+	if (!backing_path.dentry)
+		return -EBADF;
+
+	inode_lock_nested(backing_inode, I_MUTEX_PARENT);
+	mode = fmi->mode;
+	if (!IS_POSIXACL(backing_inode))
+		mode &= ~fmi->umask;
+	*out = vfs_mkdir(&init_user_ns, backing_inode, backing_path.dentry,
+			mode);
+	if (*out)
+		goto out;
+	if (d_really_is_negative(backing_path.dentry) ||
+	    unlikely(d_unhashed(backing_path.dentry))) {
+		d = lookup_one_len(entry->d_name.name,
+				   backing_path.dentry->d_parent,
+				   entry->d_name.len);
+		if (IS_ERR(d)) {
+			*out = PTR_ERR(d);
+			goto out;
+		}
+		dput(backing_path.dentry);
+		backing_path.dentry = d;
+	}
+	inode = fuse_iget_backing(dir->i_sb, fuse_inode->nodeid, backing_inode);
+	if (IS_ERR(inode)) {
+		*out = PTR_ERR(inode);
+		goto out;
+	}
+	d_instantiate(entry, inode);
+out:
+	inode_unlock(backing_inode);
+	path_put(&backing_path);
+	return *out;
+}
+
+int fuse_mkdir_finalize(struct bpf_fuse_args *fa, int *out,
+			  struct inode *dir, struct dentry *entry, umode_t mode)
+{
+	return 0;
+}
+
+int fuse_rmdir_initialize_in(struct bpf_fuse_args *fa, struct fuse_dummy_io *dummy,
+			     struct inode *dir, struct dentry *entry)
+{
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(dir),
+		.opcode = FUSE_RMDIR,
+		.in_numargs = 1,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = entry->d_name.len + 1,
+			.flags = BPF_FUSE_IMMUTABLE,
+			.value =  (void *) entry->d_name.name,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_rmdir_initialize_out(struct bpf_fuse_args *fa, struct fuse_dummy_io *dummy,
+			      struct inode *dir, struct dentry *entry)
+{
+	return 0;
+}
+
+int fuse_rmdir_backing(struct bpf_fuse_args *fa, int *out,
+		       struct inode *dir, struct dentry *entry)
+{
+	struct path backing_path;
+	struct dentry *backing_parent_dentry;
+	struct inode *backing_inode;
+
+	get_fuse_backing_path(entry, &backing_path);
+	if (!backing_path.dentry)
+		return -EBADF;
+
+	backing_parent_dentry = dget_parent(backing_path.dentry);
+	backing_inode = d_inode(backing_parent_dentry);
+
+	inode_lock_nested(backing_inode, I_MUTEX_PARENT);
+	*out = vfs_rmdir(&init_user_ns, backing_inode, backing_path.dentry);
+	inode_unlock(backing_inode);
+
+	dput(backing_parent_dentry);
+	if (!*out)
+		d_drop(entry);
+	path_put(&backing_path);
+	return *out;
+}
+
+int fuse_rmdir_finalize(struct bpf_fuse_args *fa, int *out, struct inode *dir, struct dentry *entry)
+{
+	return 0;
+}
+
+int fuse_unlink_initialize_in(struct bpf_fuse_args *fa, struct fuse_dummy_io *dummy,
+			      struct inode *dir, struct dentry *entry)
+{
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(dir),
+		.opcode = FUSE_UNLINK,
+		.in_numargs = 1,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = entry->d_name.len + 1,
+			.flags = BPF_FUSE_IMMUTABLE,
+			.value =  (void *) entry->d_name.name,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_unlink_initialize_out(struct bpf_fuse_args *fa, struct fuse_dummy_io *dummy,
+			       struct inode *dir, struct dentry *entry)
+{
+	return 0;
+}
+
+int fuse_unlink_backing(struct bpf_fuse_args *fa, int *out, struct inode *dir, struct dentry *entry)
+{
+	struct path backing_path;
+	struct dentry *backing_parent_dentry;
+	struct inode *backing_inode;
+
+	get_fuse_backing_path(entry, &backing_path);
+	if (!backing_path.dentry)
+		return -EBADF;
+
+	/* TODO Not sure if we should reverify like overlayfs, or get inode from d_parent */
+	backing_parent_dentry = dget_parent(backing_path.dentry);
+	backing_inode = d_inode(backing_parent_dentry);
+
+	inode_lock_nested(backing_inode, I_MUTEX_PARENT);
+	*out = vfs_unlink(&init_user_ns, backing_inode, backing_path.dentry,
+			 NULL);
+	inode_unlock(backing_inode);
+
+	dput(backing_parent_dentry);
+	if (!*out)
+		d_drop(entry);
+	path_put(&backing_path);
+	return *out;
+}
+
+int fuse_unlink_finalize(struct bpf_fuse_args *fa, int *out,
+			 struct inode *dir, struct dentry *entry)
+{
+	return 0;
+}
+
 int fuse_access_initialize_in(struct bpf_fuse_args *fa, struct fuse_access_in *fai,
 			      struct inode *inode, int mask)
 {
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index a89690662b3b..d8237b7a23f2 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -896,6 +896,16 @@ static int fuse_mknod(struct user_namespace *mnt_userns, struct inode *dir,
 	struct fuse_mount *fm = get_fuse_mount(dir);
 	FUSE_ARGS(args);
 
+#ifdef CONFIG_FUSE_BPF
+	int err;
+
+	if (fuse_bpf_backing(dir, struct fuse_mknod_in, err,
+			fuse_mknod_initialize_in, fuse_mknod_initialize_out,
+			fuse_mknod_backing, fuse_mknod_finalize,
+			dir, entry, mode, rdev))
+		return err;
+#endif
+
 	if (!fm->fc->dont_mask)
 		mode &= ~current_umask();
 
@@ -925,6 +935,16 @@ static int fuse_mkdir(struct user_namespace *mnt_userns, struct inode *dir,
 	struct fuse_mount *fm = get_fuse_mount(dir);
 	FUSE_ARGS(args);
 
+#ifdef CONFIG_FUSE_BPF
+	int err;
+
+	if (fuse_bpf_backing(dir, struct fuse_mkdir_in, err,
+			fuse_mkdir_initialize_in, fuse_mkdir_initialize_out,
+			fuse_mkdir_backing, fuse_mkdir_finalize,
+			dir, entry, mode))
+		return err;
+#endif
+
 	if (!fm->fc->dont_mask)
 		mode &= ~current_umask();
 
@@ -1010,6 +1030,16 @@ static int fuse_unlink(struct inode *dir, struct dentry *entry)
 	if (fuse_is_bad(dir))
 		return -EIO;
 
+#ifdef CONFIG_FUSE_BPF
+	{
+		if (fuse_bpf_backing(dir, struct fuse_dummy_io, err,
+					fuse_unlink_initialize_in, fuse_unlink_initialize_out,
+					fuse_unlink_backing, fuse_unlink_finalize,
+					dir, entry))
+			return err;
+	}
+#endif
+
 	args.opcode = FUSE_UNLINK;
 	args.nodeid = get_node_id(dir);
 	args.in_numargs = 1;
@@ -1033,6 +1063,16 @@ static int fuse_rmdir(struct inode *dir, struct dentry *entry)
 	if (fuse_is_bad(dir))
 		return -EIO;
 
+#ifdef CONFIG_FUSE_BPF
+	{
+		if (fuse_bpf_backing(dir, struct fuse_dummy_io, err,
+					fuse_rmdir_initialize_in, fuse_rmdir_initialize_out,
+					fuse_rmdir_backing, fuse_rmdir_finalize,
+					dir, entry))
+			return err;
+	}
+#endif
+
 	args.opcode = FUSE_RMDIR;
 	args.nodeid = get_node_id(dir);
 	args.in_numargs = 1;
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index f36a00e30c3f..9d6c9cc68268 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1439,6 +1439,41 @@ int fuse_create_open_finalize(struct bpf_fuse_args *fa, int *out,
 			      struct inode *dir, struct dentry *entry,
 			      struct file *file, unsigned int flags, umode_t mode);
 
+int fuse_mknod_initialize_in(struct bpf_fuse_args *fa, struct fuse_mknod_in *fmi,
+			     struct inode *dir, struct dentry *entry, umode_t mode, dev_t rdev);
+int fuse_mknod_initialize_out(struct bpf_fuse_args *fa, struct fuse_mknod_in *fmi,
+			      struct inode *dir, struct dentry *entry, umode_t mode, dev_t rdev);
+int fuse_mknod_backing(struct bpf_fuse_args *fa, int *out,
+		       struct inode *dir, struct dentry *entry, umode_t mode, dev_t rdev);
+int fuse_mknod_finalize(struct bpf_fuse_args *fa, int *out,
+			struct inode *dir, struct dentry *entry, umode_t mode, dev_t rdev);
+
+int fuse_mkdir_initialize_in(struct bpf_fuse_args *fa, struct fuse_mkdir_in *fmi,
+			     struct inode *dir, struct dentry *entry, umode_t mode);
+int fuse_mkdir_initialize_out(struct bpf_fuse_args *fa, struct fuse_mkdir_in *fmi,
+			      struct inode *dir, struct dentry *entry, umode_t mode);
+int fuse_mkdir_backing(struct bpf_fuse_args *fa, int *out,
+		       struct inode *dir, struct dentry *entry, umode_t mode);
+int fuse_mkdir_finalize(struct bpf_fuse_args *fa, int *out,
+			struct inode *dir, struct dentry *entry, umode_t mode);
+
+int fuse_rmdir_initialize_in(struct bpf_fuse_args *fa, struct fuse_dummy_io *fmi,
+			     struct inode *dir, struct dentry *entry);
+int fuse_rmdir_initialize_out(struct bpf_fuse_args *fa, struct fuse_dummy_io *fmi,
+			      struct inode *dir, struct dentry *entry);
+int fuse_rmdir_backing(struct bpf_fuse_args *fa, int *out, struct inode *dir, struct dentry *entry);
+int fuse_rmdir_finalize(struct bpf_fuse_args *fa, int *out,
+			struct inode *dir, struct dentry *entry);
+
+int fuse_unlink_initialize_in(struct bpf_fuse_args *fa, struct fuse_dummy_io *fmi,
+			      struct inode *dir, struct dentry *entry);
+int fuse_unlink_initialize_out(struct bpf_fuse_args *fa, struct fuse_dummy_io *fmi,
+			       struct inode *dir, struct dentry *entry);
+int fuse_unlink_backing(struct bpf_fuse_args *fa, int *out,
+			struct inode *dir, struct dentry *entry);
+int fuse_unlink_finalize(struct bpf_fuse_args *fa, int *out,
+			 struct inode *dir, struct dentry *entry);
+
 int fuse_release_initialize_in(struct bpf_fuse_args *fa, struct fuse_release_in *fri,
 			       struct inode *inode, struct file *file);
 int fuse_release_initialize_out(struct bpf_fuse_args *fa, struct fuse_release_in *fri,
-- 
2.37.3.998.g577e59143f-goog

[PATCH 15/26] fuse-bpf: Add support for read/write iter

[Daniel Rosenberg]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c | 291 ++++++++++++++++++++++++++++++++++++++++++++++
 fs/fuse/control.c |   2 +-
 fs/fuse/file.c    |  28 +++++
 fs/fuse/fuse_i.h  |  42 ++++++-
 fs/fuse/inode.c   |  13 +++
 5 files changed, 374 insertions(+), 2 deletions(-)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index 1fe61177cdfb..cf4ad9f4fe10 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -12,6 +12,47 @@
 #include <linux/namei.h>
 #include <linux/bpf_fuse.h>
 
+#define FUSE_BPF_IOCB_MASK (IOCB_APPEND | IOCB_DSYNC | IOCB_HIPRI | IOCB_NOWAIT | IOCB_SYNC)
+
+struct fuse_bpf_aio_req {
+	struct kiocb iocb;
+	refcount_t ref;
+	struct kiocb *iocb_orig;
+};
+
+static struct kmem_cache *fuse_bpf_aio_request_cachep;
+
+static void fuse_file_accessed(struct file *dst_file, struct file *src_file)
+{
+	struct inode *dst_inode;
+	struct inode *src_inode;
+
+	if (dst_file->f_flags & O_NOATIME)
+		return;
+
+	dst_inode = file_inode(dst_file);
+	src_inode = file_inode(src_file);
+
+	if ((!timespec64_equal(&dst_inode->i_mtime, &src_inode->i_mtime) ||
+	     !timespec64_equal(&dst_inode->i_ctime, &src_inode->i_ctime))) {
+		dst_inode->i_mtime = src_inode->i_mtime;
+		dst_inode->i_ctime = src_inode->i_ctime;
+	}
+
+	touch_atime(&dst_file->f_path);
+}
+
+static void fuse_copyattr(struct file *dst_file, struct file *src_file)
+{
+	struct inode *dst = file_inode(dst_file);
+	struct inode *src = file_inode(src_file);
+
+	dst->i_atime = src->i_atime;
+	dst->i_mtime = src->i_mtime;
+	dst->i_ctime = src->i_ctime;
+	i_size_write(dst, i_size_read(src));
+}
+
 struct bpf_prog *fuse_get_bpf_prog(struct file *file)
 {
 	struct bpf_prog *bpf_prog = ERR_PTR(-EINVAL);
@@ -469,6 +510,241 @@ int fuse_lseek_finalize(struct bpf_fuse_args *fa, loff_t *out,
 	return 0;
 }
 
+static inline void fuse_bpf_aio_put(struct fuse_bpf_aio_req *aio_req)
+{
+	if (refcount_dec_and_test(&aio_req->ref))
+		kmem_cache_free(fuse_bpf_aio_request_cachep, aio_req);
+}
+
+static void fuse_bpf_aio_cleanup_handler(struct fuse_bpf_aio_req *aio_req)
+{
+	struct kiocb *iocb = &aio_req->iocb;
+	struct kiocb *iocb_orig = aio_req->iocb_orig;
+
+	if (iocb->ki_flags & IOCB_WRITE) {
+		__sb_writers_acquired(file_inode(iocb->ki_filp)->i_sb,
+				      SB_FREEZE_WRITE);
+		file_end_write(iocb->ki_filp);
+		fuse_copyattr(iocb_orig->ki_filp, iocb->ki_filp);
+	}
+	iocb_orig->ki_pos = iocb->ki_pos;
+	fuse_bpf_aio_put(aio_req);
+}
+
+static void fuse_bpf_aio_rw_complete(struct kiocb *iocb, long res)
+{
+	struct fuse_bpf_aio_req *aio_req =
+		container_of(iocb, struct fuse_bpf_aio_req, iocb);
+	struct kiocb *iocb_orig = aio_req->iocb_orig;
+
+	fuse_bpf_aio_cleanup_handler(aio_req);
+	iocb_orig->ki_complete(iocb_orig, res);
+}
+
+int fuse_file_read_iter_initialize_in(struct bpf_fuse_args *fa, struct fuse_file_read_iter_io *fri,
+				      struct kiocb *iocb, struct iov_iter *to)
+{
+	struct file *file = iocb->ki_filp;
+	struct fuse_file *ff = file->private_data;
+
+	fri->fri = (struct fuse_read_in) {
+		.fh = ff->fh,
+		.offset = iocb->ki_pos,
+		.size = to->count,
+	};
+
+	/* TODO we can't assume 'to' is a kvec */
+	/* TODO we also can't assume the vector has only one component */
+	*fa = (struct bpf_fuse_args) {
+		.opcode = FUSE_READ,
+		.nodeid = ff->nodeid,
+		.in_numargs = 1,
+		.in_args[0].size = sizeof(fri->fri),
+		.in_args[0].value = &fri->fri,
+		/*
+		 * TODO Design this properly.
+		 * Possible approach: do not pass buf to bpf
+		 * If going to userland, do a deep copy
+		 * For extra credit, do that to/from the vector, rather than
+		 * making an extra copy in the kernel
+		 */
+	};
+
+	return 0;
+}
+
+int fuse_file_read_iter_initialize_out(struct bpf_fuse_args *fa, struct fuse_file_read_iter_io *fri,
+				       struct kiocb *iocb, struct iov_iter *to)
+{
+	fri->frio = (struct fuse_read_iter_out) {
+		.ret = fri->fri.size,
+	};
+
+	fa->out_numargs = 1;
+	fa->out_args[0].size = sizeof(fri->frio);
+	fa->out_args[0].value = &fri->frio;
+
+	return 0;
+}
+
+int fuse_file_read_iter_backing(struct bpf_fuse_args *fa, ssize_t *out,
+				struct kiocb *iocb, struct iov_iter *to)
+{
+	struct fuse_read_iter_out *frio = fa->out_args[0].value;
+	struct file *file = iocb->ki_filp;
+	struct fuse_file *ff = file->private_data;
+
+	if (!iov_iter_count(to))
+		return 0;
+
+	if ((iocb->ki_flags & IOCB_DIRECT) &&
+	    (!ff->backing_file->f_mapping->a_ops ||
+	     !ff->backing_file->f_mapping->a_ops->direct_IO))
+		return -EINVAL;
+
+	/* TODO This just plain ignores any change to fuse_read_in */
+	if (is_sync_kiocb(iocb)) {
+		*out = vfs_iter_read(ff->backing_file, to, &iocb->ki_pos,
+				iocb_to_rw_flags(iocb->ki_flags, FUSE_BPF_IOCB_MASK));
+	} else {
+		struct fuse_bpf_aio_req *aio_req;
+
+		*out = -ENOMEM;
+		aio_req = kmem_cache_zalloc(fuse_bpf_aio_request_cachep, GFP_KERNEL);
+		if (!aio_req)
+			goto out;
+
+		aio_req->iocb_orig = iocb;
+		kiocb_clone(&aio_req->iocb, iocb, ff->backing_file);
+		aio_req->iocb.ki_complete = fuse_bpf_aio_rw_complete;
+		refcount_set(&aio_req->ref, 2);
+		*out = vfs_iocb_iter_read(ff->backing_file, &aio_req->iocb, to);
+		fuse_bpf_aio_put(aio_req);
+		if (*out != -EIOCBQUEUED)
+			fuse_bpf_aio_cleanup_handler(aio_req);
+	}
+
+	frio->ret = *out;
+
+	/* TODO Need to point value at the buffer for post-modification */
+
+out:
+	fuse_file_accessed(file, ff->backing_file);
+
+	return *out;
+}
+
+int fuse_file_read_iter_finalize(struct bpf_fuse_args *fa, ssize_t *out,
+				 struct kiocb *iocb, struct iov_iter *to)
+{
+	struct fuse_read_iter_out *frio = fa->out_args[0].value;
+
+	*out = frio->ret;
+
+	return 0;
+}
+
+int fuse_file_write_iter_initialize_in(struct bpf_fuse_args *fa,
+				       struct fuse_file_write_iter_io *fwio,
+				       struct kiocb *iocb, struct iov_iter *from)
+{
+	struct file *file = iocb->ki_filp;
+	struct fuse_file *ff = file->private_data;
+
+	*fwio = (struct fuse_file_write_iter_io) {
+		.fwi.fh = ff->fh,
+		.fwi.offset = iocb->ki_pos,
+		.fwi.size = from->count,
+	};
+
+	/* TODO we can't assume 'from' is a kvec */
+	*fa = (struct bpf_fuse_args) {
+		.opcode = FUSE_WRITE,
+		.nodeid = ff->nodeid,
+		.in_numargs = 2,
+		.in_args[0].size = sizeof(fwio->fwi),
+		.in_args[0].value = &fwio->fwi,
+		.in_args[1].size = fwio->fwi.size,
+		.in_args[1].value = from->kvec->iov_base,
+	};
+
+	return 0;
+}
+
+int fuse_file_write_iter_initialize_out(struct bpf_fuse_args *fa,
+					struct fuse_file_write_iter_io *fwio,
+					struct kiocb *iocb, struct iov_iter *from)
+{
+	/* TODO we can't assume 'from' is a kvec */
+	fa->out_numargs = 1;
+	fa->out_args[0].size = sizeof(fwio->fwio);
+	fa->out_args[0].value = &fwio->fwio;
+
+	return 0;
+}
+
+int fuse_file_write_iter_backing(struct bpf_fuse_args *fa, ssize_t *out,
+				 struct kiocb *iocb, struct iov_iter *from)
+{
+	struct file *file = iocb->ki_filp;
+	struct fuse_file *ff = file->private_data;
+	struct fuse_write_iter_out *fwio = fa->out_args[0].value;
+
+	if (!iov_iter_count(from))
+		return 0;
+
+	/* TODO This just plain ignores any change to fuse_write_in */
+	/* TODO uint32_t seems smaller than ssize_t.... right? */
+	inode_lock(file_inode(file));
+
+	fuse_copyattr(file, ff->backing_file);
+
+	if (is_sync_kiocb(iocb)) {
+		file_start_write(ff->backing_file);
+		*out = vfs_iter_write(ff->backing_file, from, &iocb->ki_pos,
+					   iocb_to_rw_flags(iocb->ki_flags, FUSE_BPF_IOCB_MASK));
+		file_end_write(ff->backing_file);
+
+		/* Must reflect change in size of backing file to upper file */
+		if (*out > 0)
+			fuse_copyattr(file, ff->backing_file);
+	} else {
+		struct fuse_bpf_aio_req *aio_req;
+
+		*out = -ENOMEM;
+		aio_req = kmem_cache_zalloc(fuse_bpf_aio_request_cachep, GFP_KERNEL);
+		if (!aio_req)
+			goto out;
+
+		file_start_write(ff->backing_file);
+		__sb_writers_release(file_inode(ff->backing_file)->i_sb, SB_FREEZE_WRITE);
+		aio_req->iocb_orig = iocb;
+		kiocb_clone(&aio_req->iocb, iocb, ff->backing_file);
+		aio_req->iocb.ki_complete = fuse_bpf_aio_rw_complete;
+		refcount_set(&aio_req->ref, 2);
+		*out = vfs_iocb_iter_write(ff->backing_file, &aio_req->iocb, from);
+		fuse_bpf_aio_put(aio_req);
+		if (*out != -EIOCBQUEUED)
+			fuse_bpf_aio_cleanup_handler(aio_req);
+	}
+
+out:
+	inode_unlock(file_inode(file));
+	fwio->ret = *out;
+	if (*out < 0)
+		return *out;
+	return 0;
+}
+
+int fuse_file_write_iter_finalize(struct bpf_fuse_args *fa, ssize_t *out,
+				  struct kiocb *iocb, struct iov_iter *from)
+{
+	struct fuse_write_iter_out *fwio = fa->out_args[0].value;
+
+	*out = fwio->ret;
+	return 0;
+}
+
 ssize_t fuse_backing_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	int ret;
@@ -1074,3 +1350,18 @@ int fuse_access_finalize(struct bpf_fuse_args *fa, int *out, struct inode *inode
 	return 0;
 }
 
+int __init fuse_bpf_init(void)
+{
+	fuse_bpf_aio_request_cachep = kmem_cache_create("fuse_bpf_aio_req",
+						   sizeof(struct fuse_bpf_aio_req),
+						   0, SLAB_HWCACHE_ALIGN, NULL);
+	if (!fuse_bpf_aio_request_cachep)
+		return -ENOMEM;
+
+	return 0;
+}
+
+void __exit fuse_bpf_cleanup(void)
+{
+	kmem_cache_destroy(fuse_bpf_aio_request_cachep);
+}
diff --git a/fs/fuse/control.c b/fs/fuse/control.c
index 247ef4f76761..685552453751 100644
--- a/fs/fuse/control.c
+++ b/fs/fuse/control.c
@@ -378,7 +378,7 @@ int __init fuse_ctl_init(void)
 	return register_filesystem(&fuse_ctl_fs_type);
 }
 
-void __exit fuse_ctl_cleanup(void)
+void fuse_ctl_cleanup(void)
 {
 	unregister_filesystem(&fuse_ctl_fs_type);
 }
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 7feb73274c3e..443f1af8a431 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1625,6 +1625,20 @@ static ssize_t fuse_file_read_iter(struct kiocb *iocb, struct iov_iter *to)
 	if (FUSE_IS_DAX(inode))
 		return fuse_dax_read_iter(iocb, to);
 
+#ifdef CONFIG_FUSE_BPF
+	{
+		ssize_t ret;
+
+		if (fuse_bpf_backing(inode, struct fuse_file_read_iter_io, ret,
+				       fuse_file_read_iter_initialize_in,
+				       fuse_file_read_iter_initialize_out,
+				       fuse_file_read_iter_backing,
+				       fuse_file_read_iter_finalize,
+				       iocb, to))
+			return ret;
+	}
+#endif
+
 	if (!(ff->open_flags & FOPEN_DIRECT_IO))
 		return fuse_cache_read_iter(iocb, to);
 	else
@@ -1643,6 +1657,20 @@ static ssize_t fuse_file_write_iter(struct kiocb *iocb, struct iov_iter *from)
 	if (FUSE_IS_DAX(inode))
 		return fuse_dax_write_iter(iocb, from);
 
+#ifdef CONFIG_FUSE_BPF
+	{
+		ssize_t ret = 0;
+
+		if (fuse_bpf_backing(inode, struct fuse_file_write_iter_io, ret,
+				       fuse_file_write_iter_initialize_in,
+				       fuse_file_write_iter_initialize_out,
+				       fuse_file_write_iter_backing,
+				       fuse_file_write_iter_finalize,
+				       iocb, from))
+			return ret;
+	}
+#endif
+
 	if (!(ff->open_flags & FOPEN_DIRECT_IO))
 		return fuse_cache_write_iter(iocb, from);
 	else
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 9d6c9cc68268..f427a7bb367c 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1135,7 +1135,7 @@ int fuse_dev_init(void);
 void fuse_dev_cleanup(void);
 
 int fuse_ctl_init(void);
-void __exit fuse_ctl_cleanup(void);
+void fuse_ctl_cleanup(void);
 
 /**
  * Simple request sending that does request allocation and freeing
@@ -1503,6 +1503,43 @@ int fuse_lseek_backing(struct bpf_fuse_args *fa, loff_t *out, struct file *file,
 int fuse_lseek_finalize(struct bpf_fuse_args *fa, loff_t *out, struct file *file,
 			loff_t offset, int whence);
 
+struct fuse_read_iter_out {
+	uint64_t ret;
+};
+struct fuse_file_read_iter_io {
+	struct fuse_read_in fri;
+	struct fuse_read_iter_out frio;
+};
+
+int fuse_file_read_iter_initialize_in(struct bpf_fuse_args *fa, struct fuse_file_read_iter_io *fri,
+				      struct kiocb *iocb, struct iov_iter *to);
+int fuse_file_read_iter_initialize_out(struct bpf_fuse_args *fa, struct fuse_file_read_iter_io *fri,
+				       struct kiocb *iocb, struct iov_iter *to);
+int fuse_file_read_iter_backing(struct bpf_fuse_args *fa, ssize_t *out,
+				struct kiocb *iocb, struct iov_iter *to);
+int fuse_file_read_iter_finalize(struct bpf_fuse_args *fa, ssize_t *out,
+				 struct kiocb *iocb, struct iov_iter *to);
+
+struct fuse_write_iter_out {
+	uint64_t ret;
+};
+struct fuse_file_write_iter_io {
+	struct fuse_write_in fwi;
+	struct fuse_write_out fwo;
+	struct fuse_write_iter_out fwio;
+};
+
+int fuse_file_write_iter_initialize_in(struct bpf_fuse_args *fa,
+				       struct fuse_file_write_iter_io *fwio,
+				       struct kiocb *iocb, struct iov_iter *from);
+int fuse_file_write_iter_initialize_out(struct bpf_fuse_args *fa,
+					struct fuse_file_write_iter_io *fwio,
+					struct kiocb *iocb, struct iov_iter *from);
+int fuse_file_write_iter_backing(struct bpf_fuse_args *fa, ssize_t *out,
+				 struct kiocb *iocb, struct iov_iter *from);
+int fuse_file_write_iter_finalize(struct bpf_fuse_args *fa, ssize_t *out,
+				  struct kiocb *iocb, struct iov_iter *from);
+
 ssize_t fuse_backing_mmap(struct file *file, struct vm_area_struct *vma);
 
 int fuse_file_fallocate_initialize_in(struct bpf_fuse_args *fa,
@@ -1570,6 +1607,9 @@ static inline u64 attr_timeout(struct fuse_attr_out *o)
 }
 
 #ifdef CONFIG_FUSE_BPF
+int __init fuse_bpf_init(void);
+void __exit fuse_bpf_cleanup(void);
+
 /*
  * expression statement to wrap the backing filter logic
  * struct inode *inode: inode with bpf and backing inode
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 290eae750282..c96cfcbfd96a 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -2117,11 +2117,21 @@ static int __init fuse_init(void)
 	if (res)
 		goto err_sysfs_cleanup;
 
+#ifdef CONFIG_FUSE_BPF
+	res = fuse_bpf_init();
+	if (res)
+		goto err_ctl_cleanup;
+#endif
+
 	sanitize_global_limit(&max_user_bgreq);
 	sanitize_global_limit(&max_user_congthresh);
 
 	return 0;
 
+#ifdef CONFIG_FUSE_BPF
+ err_ctl_cleanup:
+	fuse_ctl_cleanup();
+#endif
  err_sysfs_cleanup:
 	fuse_sysfs_cleanup();
  err_dev_cleanup:
@@ -2139,6 +2149,9 @@ static void __exit fuse_exit(void)
 	fuse_ctl_cleanup();
 	fuse_sysfs_cleanup();
 	fuse_fs_cleanup();
+#ifdef CONFIG_FUSE_BPF
+	fuse_bpf_cleanup();
+#endif
 	fuse_dev_cleanup();
 }
 
-- 
2.37.3.998.g577e59143f-goog

[PATCH 16/26] fuse-bpf: support FUSE_READDIR

[Daniel Rosenberg]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c         | 162 ++++++++++++++++++++++++++++++++++++++
 fs/fuse/fuse_i.h          |  18 +++++
 fs/fuse/readdir.c         |  22 ++++++
 include/uapi/linux/fuse.h |   6 ++
 4 files changed, 208 insertions(+)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index cf4ad9f4fe10..a31199064dc7 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -1312,6 +1312,168 @@ int fuse_unlink_finalize(struct bpf_fuse_args *fa, int *out,
 	return 0;
 }
 
+int fuse_readdir_initialize_in(struct bpf_fuse_args *fa, struct fuse_read_io *frio,
+			    struct file *file, struct dir_context *ctx,
+			    bool *force_again, bool *allow_force, bool is_continued)
+{
+	struct fuse_file *ff = file->private_data;
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = ff->nodeid,
+		.opcode = FUSE_READDIR,
+		.in_numargs = 1,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = sizeof(frio->fri),
+			.value = &frio->fri,
+		},
+	};
+
+	frio->fri = (struct fuse_read_in) {
+		.fh = ff->fh,
+		.offset = ctx->pos,
+		.size = PAGE_SIZE,
+	};
+
+	*force_again = false;
+	*allow_force = true;
+	return 0;
+}
+
+int fuse_readdir_initialize_out(struct bpf_fuse_args *fa, struct fuse_read_io *frio,
+				struct file *file, struct dir_context *ctx,
+				bool *force_again, bool *allow_force, bool is_continued)
+{
+	u8 *page = (u8 *)__get_free_page(GFP_KERNEL);
+
+	if (!page)
+		return -ENOMEM;
+
+	fa->flags = FUSE_BPF_OUT_ARGVAR;
+	fa->out_numargs = 2;
+	fa->out_args[0] = (struct bpf_fuse_arg) {
+		.size = sizeof(frio->fro),
+		.value = &frio->fro,
+	};
+	fa->out_args[1] = (struct bpf_fuse_arg) {
+		.size = PAGE_SIZE,
+		.max_size = PAGE_SIZE,
+		.flags = BPF_FUSE_VARIABLE_SIZE,
+		.value = page,
+	};
+	frio->fro = (struct fuse_read_out) {
+		.again = 0,
+		.offset = 0,
+	};
+
+	return 0;
+}
+
+struct extfuse_ctx {
+	struct dir_context ctx;
+	u8 *addr;
+	size_t offset;
+};
+
+static int filldir(struct dir_context *ctx, const char *name, int namelen,
+		   loff_t offset, u64 ino, unsigned int d_type)
+{
+	struct extfuse_ctx *ec = container_of(ctx, struct extfuse_ctx, ctx);
+	struct fuse_dirent *fd = (struct fuse_dirent *)(ec->addr + ec->offset);
+
+	if (ec->offset + sizeof(struct fuse_dirent) + namelen > PAGE_SIZE)
+		return -ENOMEM;
+
+	*fd = (struct fuse_dirent) {
+		.ino = ino,
+		.off = offset,
+		.namelen = namelen,
+		.type = d_type,
+	};
+
+	memcpy(fd->name, name, namelen);
+	ec->offset += FUSE_DIRENT_SIZE(fd);
+
+	return 0;
+}
+
+static int parse_dirfile(char *buf, size_t nbytes, struct dir_context *ctx)
+{
+	while (nbytes >= FUSE_NAME_OFFSET) {
+		struct fuse_dirent *dirent = (struct fuse_dirent *) buf;
+		size_t reclen = FUSE_DIRENT_SIZE(dirent);
+
+		if (!dirent->namelen || dirent->namelen > FUSE_NAME_MAX)
+			return -EIO;
+		if (reclen > nbytes)
+			break;
+		if (memchr(dirent->name, '/', dirent->namelen) != NULL)
+			return -EIO;
+
+		ctx->pos = dirent->off;
+		if (!dir_emit(ctx, dirent->name, dirent->namelen, dirent->ino,
+				dirent->type))
+			break;
+
+		buf += reclen;
+		nbytes -= reclen;
+	}
+
+	return 0;
+}
+
+
+int fuse_readdir_backing(struct bpf_fuse_args *fa, int *out,
+			 struct file *file, struct dir_context *ctx,
+			 bool *force_again, bool *allow_force, bool is_continued)
+{
+	struct fuse_file *ff = file->private_data;
+	struct file *backing_dir = ff->backing_file;
+	struct fuse_read_out *fro = fa->out_args[0].value;
+	struct extfuse_ctx ec;
+
+	ec = (struct extfuse_ctx) {
+		.ctx.actor = filldir,
+		.ctx.pos = ctx->pos,
+		.addr = fa->out_args[1].value,
+	};
+
+	if (!ec.addr)
+		return -ENOMEM;
+
+	if (!is_continued)
+		backing_dir->f_pos = file->f_pos;
+
+	*out = iterate_dir(backing_dir, &ec.ctx);
+	if (ec.offset == 0)
+		*allow_force = false;
+	fa->out_args[1].size = ec.offset;
+
+	fro->offset = ec.ctx.pos;
+	fro->again = false;
+
+	return *out;
+}
+
+int fuse_readdir_finalize(struct bpf_fuse_args *fa, int *out,
+			    struct file *file, struct dir_context *ctx,
+			    bool *force_again, bool *allow_force, bool is_continued)
+{
+	struct fuse_read_out *fro = fa->out_args[0].value;
+	struct fuse_file *ff = file->private_data;
+	struct file *backing_dir = ff->backing_file;
+
+	*out = parse_dirfile(fa->out_args[1].value, fa->out_args[1].size, ctx);
+	*force_again = !!fro->again;
+	if (*force_again && !*allow_force)
+		*out = -EINVAL;
+
+	ctx->pos = fro->offset;
+	backing_dir->f_pos = fro->offset;
+
+	free_page((unsigned long)fa->out_args[1].value);
+	return *out;
+}
+
 int fuse_access_initialize_in(struct bpf_fuse_args *fa, struct fuse_access_in *fai,
 			      struct inode *inode, int mask)
 {
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index f427a7bb367c..8780a50be244 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1572,6 +1572,24 @@ int fuse_lookup_finalize(struct bpf_fuse_args *fa, struct dentry **out,
 			 struct inode *dir, struct dentry *entry, unsigned int flags);
 int fuse_revalidate_backing(struct dentry *entry, unsigned int flags);
 
+struct fuse_read_io {
+	struct fuse_read_in fri;
+	struct fuse_read_out fro;
+};
+
+int fuse_readdir_initialize_in(struct bpf_fuse_args *fa, struct fuse_read_io *frio,
+			       struct file *file, struct dir_context *ctx,
+			       bool *force_again, bool *allow_force, bool is_continued);
+int fuse_readdir_initialize_out(struct bpf_fuse_args *fa, struct fuse_read_io *frio,
+				struct file *file, struct dir_context *ctx,
+				bool *force_again, bool *allow_force, bool is_continued);
+int fuse_readdir_backing(struct bpf_fuse_args *fa, int *out,
+			 struct file *file, struct dir_context *ctx,
+			 bool *force_again, bool *allow_force, bool is_continued);
+int fuse_readdir_finalize(struct bpf_fuse_args *fa, int *out,
+			    struct file *file, struct dir_context *ctx,
+			    bool *force_again, bool *allow_force, bool is_continued);
+
 int fuse_access_initialize_in(struct bpf_fuse_args *fa, struct fuse_access_in *fai,
 			      struct inode *inode, int mask);
 int fuse_access_initialize_out(struct bpf_fuse_args *fa, struct fuse_access_in *fai,
diff --git a/fs/fuse/readdir.c b/fs/fuse/readdir.c
index b4e565711045..07da8570e337 100644
--- a/fs/fuse/readdir.c
+++ b/fs/fuse/readdir.c
@@ -20,6 +20,8 @@ static bool fuse_use_readdirplus(struct inode *dir, struct dir_context *ctx)
 
 	if (!fc->do_readdirplus)
 		return false;
+	if (fi->nodeid == 0)
+		return false;
 	if (!fc->readdirplus_auto)
 		return true;
 	if (test_and_clear_bit(FUSE_I_ADVISE_RDPLUS, &fi->state))
@@ -571,6 +573,26 @@ int fuse_readdir(struct file *file, struct dir_context *ctx)
 	struct inode *inode = file_inode(file);
 	int err;
 
+#ifdef CONFIG_FUSE_BPF
+	bool bpf_ret = false;
+	bool allow_force;
+	bool force_again = false;
+	bool is_continued = false;
+
+again:
+	bpf_ret = fuse_bpf_backing(inode, struct fuse_read_io, err,
+			       fuse_readdir_initialize_in, fuse_readdir_initialize_out,
+			       fuse_readdir_backing, fuse_readdir_finalize,
+			       file, ctx, &force_again, &allow_force, is_continued);
+	if (force_again && err >= 0) {
+		is_continued = true;
+		goto again;
+	}
+
+	if (bpf_ret)
+		return err;
+#endif
+
 	if (fuse_is_bad(inode))
 		return -EIO;
 
diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h
index 8c80c146e69b..b7736cb4bdaf 100644
--- a/include/uapi/linux/fuse.h
+++ b/include/uapi/linux/fuse.h
@@ -701,6 +701,12 @@ struct fuse_read_in {
 	uint32_t	padding;
 };
 
+struct fuse_read_out {
+	uint64_t	offset;
+	uint32_t	again;
+	uint32_t	padding;
+};
+
 #define FUSE_COMPAT_WRITE_IN_SIZE 24
 
 struct fuse_write_in {
-- 
2.37.3.998.g577e59143f-goog

[PATCH 17/26] fuse-bpf: Add support for sync operations

[Daniel Rosenberg]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c | 117 ++++++++++++++++++++++++++++++++++++++++++++++
 fs/fuse/dir.c     |   8 ++++
 fs/fuse/file.c    |  17 +++++++
 fs/fuse/fuse_i.h  |  21 +++++++++
 4 files changed, 163 insertions(+)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index a31199064dc7..4fd7442c94a1 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -436,6 +436,49 @@ int fuse_release_finalize(struct bpf_fuse_args *fa, int *out,
 	return 0;
 }
 
+int fuse_flush_initialize_in(struct bpf_fuse_args *fa, struct fuse_flush_in *ffi,
+			     struct file *file, fl_owner_t id)
+{
+	struct fuse_file *fuse_file = file->private_data;
+
+	*ffi = (struct fuse_flush_in) {
+		.fh = fuse_file->fh,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(file->f_inode),
+		.opcode = FUSE_FLUSH,
+		.in_numargs = 1,
+		.in_args[0].size = sizeof(*ffi),
+		.in_args[0].value = ffi,
+		.flags = FUSE_BPF_FORCE,
+	};
+
+	return 0;
+}
+
+int fuse_flush_initialize_out(struct bpf_fuse_args *fa, struct fuse_flush_in *ffi,
+			      struct file *file, fl_owner_t id)
+{
+	return 0;
+}
+
+int fuse_flush_backing(struct bpf_fuse_args *fa, int *out, struct file *file, fl_owner_t id)
+{
+	struct fuse_file *fuse_file = file->private_data;
+	struct file *backing_file = fuse_file->backing_file;
+
+	*out = 0;
+	if (backing_file->f_op->flush)
+		*out = backing_file->f_op->flush(backing_file, id);
+	return *out;
+}
+
+int fuse_flush_finalize(struct bpf_fuse_args *fa, int *out, struct file *file, fl_owner_t id)
+{
+	return 0;
+}
+
 int fuse_lseek_initialize_in(struct bpf_fuse_args *fa, struct fuse_lseek_io *flio,
 			     struct file *file, loff_t offset, int whence)
 {
@@ -510,6 +553,80 @@ int fuse_lseek_finalize(struct bpf_fuse_args *fa, loff_t *out,
 	return 0;
 }
 
+int fuse_fsync_initialize_in(struct bpf_fuse_args *fa, struct fuse_fsync_in *ffi,
+			     struct file *file, loff_t start, loff_t end, int datasync)
+{
+	struct fuse_file *fuse_file = file->private_data;
+
+	*ffi = (struct fuse_fsync_in) {
+		.fh = fuse_file->fh,
+		.fsync_flags = datasync ? FUSE_FSYNC_FDATASYNC : 0,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_fuse_inode(file->f_inode)->nodeid,
+		.opcode = FUSE_FSYNC,
+		.in_numargs = 1,
+		.in_args[0].size = sizeof(*ffi),
+		.in_args[0].value = ffi,
+		.flags = FUSE_BPF_FORCE,
+	};
+
+	return 0;
+}
+
+int fuse_fsync_initialize_out(struct bpf_fuse_args *fa, struct fuse_fsync_in *ffi,
+			      struct file *file, loff_t start, loff_t end, int datasync)
+{
+	return 0;
+}
+
+int fuse_fsync_backing(struct bpf_fuse_args *fa, int *out,
+		       struct file *file, loff_t start, loff_t end, int datasync)
+{
+	struct fuse_file *fuse_file = file->private_data;
+	struct file *backing_file = fuse_file->backing_file;
+	const struct fuse_fsync_in *ffi = fa->in_args[0].value;
+	int new_datasync = (ffi->fsync_flags & FUSE_FSYNC_FDATASYNC) ? 1 : 0;
+
+	*out = vfs_fsync(backing_file, new_datasync);
+	return 0;
+}
+
+int fuse_fsync_finalize(struct bpf_fuse_args *fa, int *out,
+			struct file *file, loff_t start, loff_t end, int datasync)
+{
+	return 0;
+}
+
+int fuse_dir_fsync_initialize_in(struct bpf_fuse_args *fa, struct fuse_fsync_in *ffi,
+				 struct file *file, loff_t start, loff_t end, int datasync)
+{
+	struct fuse_file *fuse_file = file->private_data;
+
+	*ffi = (struct fuse_fsync_in) {
+		.fh = fuse_file->fh,
+		.fsync_flags = datasync ? FUSE_FSYNC_FDATASYNC : 0,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_fuse_inode(file->f_inode)->nodeid,
+		.opcode = FUSE_FSYNCDIR,
+		.in_numargs = 1,
+		.in_args[0].size = sizeof(*ffi),
+		.in_args[0].value = ffi,
+		.flags = FUSE_BPF_FORCE,
+	};
+
+	return 0;
+}
+
+int fuse_dir_fsync_initialize_out(struct bpf_fuse_args *fa, struct fuse_fsync_in *ffi,
+				  struct file *file, loff_t start, loff_t end, int datasync)
+{
+	return 0;
+}
+
 static inline void fuse_bpf_aio_put(struct fuse_bpf_aio_req *aio_req)
 {
 	if (refcount_dec_and_test(&aio_req->ref))
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index d8237b7a23f2..f159b9a6d305 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1638,6 +1638,14 @@ static int fuse_dir_fsync(struct file *file, loff_t start, loff_t end,
 	if (fuse_is_bad(inode))
 		return -EIO;
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(inode, struct fuse_fsync_in, err,
+			fuse_dir_fsync_initialize_in, fuse_dir_fsync_initialize_out,
+			fuse_fsync_backing, fuse_fsync_finalize,
+			file, start, end, datasync))
+		return err;
+#endif
+
 	if (fc->no_fsyncdir)
 		return 0;
 
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 443f1af8a431..fc8f8e3a06b3 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -513,6 +513,15 @@ static int fuse_flush(struct file *file, fl_owner_t id)
 	FUSE_ARGS(args);
 	int err;
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(file->f_inode, struct fuse_flush_in, err,
+			       fuse_flush_initialize_in, fuse_flush_initialize_out,
+			       fuse_flush_backing,
+			       fuse_flush_finalize,
+			       file, id))
+	return err;
+#endif
+
 	if (fuse_is_bad(inode))
 		return -EIO;
 
@@ -588,6 +597,14 @@ static int fuse_fsync(struct file *file, loff_t start, loff_t end,
 	struct fuse_conn *fc = get_fuse_conn(inode);
 	int err;
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(inode, struct fuse_fsync_in, err,
+			       fuse_fsync_initialize_in, fuse_fsync_initialize_out,
+			       fuse_fsync_backing, fuse_fsync_finalize,
+			       file, start, end, datasync))
+		return err;
+#endif
+
 	if (fuse_is_bad(inode))
 		return -EIO;
 
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 8780a50be244..db769dd0a2e4 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1489,6 +1489,14 @@ int fuse_release_backing(struct bpf_fuse_args *fa, int *out,
 int fuse_release_finalize(struct bpf_fuse_args *fa, int *out,
 			    struct inode *inode, struct file *file);
 
+int fuse_flush_initialize_in(struct bpf_fuse_args *fa, struct fuse_flush_in *ffi,
+			     struct file *file, fl_owner_t id);
+int fuse_flush_initialize_out(struct bpf_fuse_args *fa, struct fuse_flush_in *ffi,
+			      struct file *file, fl_owner_t id);
+int fuse_flush_backing(struct bpf_fuse_args *fa, int *out, struct file *file, fl_owner_t id);
+int fuse_flush_finalize(struct bpf_fuse_args *fa, int *out,
+			struct file *file, fl_owner_t id);
+
 struct fuse_lseek_io {
 	struct fuse_lseek_in fli;
 	struct fuse_lseek_out flo;
@@ -1503,6 +1511,19 @@ int fuse_lseek_backing(struct bpf_fuse_args *fa, loff_t *out, struct file *file,
 int fuse_lseek_finalize(struct bpf_fuse_args *fa, loff_t *out, struct file *file,
 			loff_t offset, int whence);
 
+int fuse_fsync_initialize_in(struct bpf_fuse_args *fa, struct fuse_fsync_in *ffi,
+			     struct file *file, loff_t start, loff_t end, int datasync);
+int fuse_fsync_initialize_out(struct bpf_fuse_args *fa, struct fuse_fsync_in *ffi,
+			      struct file *file, loff_t start, loff_t end, int datasync);
+int fuse_fsync_backing(struct bpf_fuse_args *fa, int *out,
+		       struct file *file, loff_t start, loff_t end, int datasync);
+int fuse_fsync_finalize(struct bpf_fuse_args *fa, int *out,
+			struct file *file, loff_t start, loff_t end, int datasync);
+int fuse_dir_fsync_initialize_in(struct bpf_fuse_args *fa, struct fuse_fsync_in *ffi,
+				 struct file *file, loff_t start, loff_t end, int datasync);
+int fuse_dir_fsync_initialize_out(struct bpf_fuse_args *fa, struct fuse_fsync_in *ffi,
+				  struct file *file, loff_t start, loff_t end, int datasync);
+
 struct fuse_read_iter_out {
 	uint64_t ret;
 };
-- 
2.37.3.998.g577e59143f-goog

[PATCH 18/26] fuse-bpf: Add Rename support

[Daniel Rosenberg]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c | 197 ++++++++++++++++++++++++++++++++++++++++++++++
 fs/fuse/dir.c     |  19 +++++
 fs/fuse/fuse_i.h  |  30 +++++++
 3 files changed, 246 insertions(+)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index 4fd7442c94a1..f4ab92dc8099 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -1374,6 +1374,203 @@ int fuse_rmdir_finalize(struct bpf_fuse_args *fa, int *out, struct inode *dir, s
 	return 0;
 }
 
+static int fuse_rename_backing_common(struct inode *olddir,
+				      struct dentry *oldent,
+				      struct inode *newdir,
+				      struct dentry *newent, unsigned int flags)
+{
+	int err = 0;
+	struct path old_backing_path;
+	struct path new_backing_path;
+	struct dentry *old_backing_dir_dentry;
+	struct dentry *old_backing_dentry;
+	struct dentry *new_backing_dir_dentry;
+	struct dentry *new_backing_dentry;
+	struct dentry *trap = NULL;
+	struct inode *target_inode;
+	struct renamedata rd;
+
+	//TODO Actually deal with changing anything that isn't a flag
+	get_fuse_backing_path(oldent, &old_backing_path);
+	if (!old_backing_path.dentry)
+		return -EBADF;
+	get_fuse_backing_path(newent, &new_backing_path);
+	if (!new_backing_path.dentry) {
+		/*
+		 * TODO A file being moved from a backing path to another
+		 * backing path which is not yet instrumented with FUSE-BPF.
+		 * This may be slow and should be substituted with something
+		 * more clever.
+		 */
+		err = -EXDEV;
+		goto put_old_path;
+	}
+	if (new_backing_path.mnt != old_backing_path.mnt) {
+		err = -EXDEV;
+		goto put_new_path;
+	}
+	old_backing_dentry = old_backing_path.dentry;
+	new_backing_dentry = new_backing_path.dentry;
+	old_backing_dir_dentry = dget_parent(old_backing_dentry);
+	new_backing_dir_dentry = dget_parent(new_backing_dentry);
+	target_inode = d_inode(newent);
+
+	trap = lock_rename(old_backing_dir_dentry, new_backing_dir_dentry);
+	if (trap == old_backing_dentry) {
+		err = -EINVAL;
+		goto put_parents;
+	}
+	if (trap == new_backing_dentry) {
+		err = -ENOTEMPTY;
+		goto put_parents;
+	}
+
+	rd = (struct renamedata) {
+		.old_mnt_userns = &init_user_ns,
+		.old_dir = d_inode(old_backing_dir_dentry),
+		.old_dentry = old_backing_dentry,
+		.new_mnt_userns = &init_user_ns,
+		.new_dir = d_inode(new_backing_dir_dentry),
+		.new_dentry = new_backing_dentry,
+		.flags = flags,
+	};
+	err = vfs_rename(&rd);
+	if (err)
+		goto unlock;
+	if (target_inode)
+		fsstack_copy_attr_all(target_inode,
+				get_fuse_inode(target_inode)->backing_inode);
+	fsstack_copy_attr_all(d_inode(oldent), d_inode(old_backing_dentry));
+unlock:
+	unlock_rename(old_backing_dir_dentry, new_backing_dir_dentry);
+put_parents:
+	dput(new_backing_dir_dentry);
+	dput(old_backing_dir_dentry);
+put_new_path:
+	path_put(&new_backing_path);
+put_old_path:
+	path_put(&old_backing_path);
+	return err;
+}
+
+int fuse_rename2_initialize_in(struct bpf_fuse_args *fa, struct fuse_rename2_in *fri,
+			       struct inode *olddir, struct dentry *oldent,
+			       struct inode *newdir, struct dentry *newent,
+			       unsigned int flags)
+{
+	*fri = (struct fuse_rename2_in) {
+		.newdir = get_node_id(newdir),
+		.flags = flags,
+	};
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(olddir),
+		.opcode = FUSE_RENAME2,
+		.in_numargs = 3,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = sizeof(*fri),
+			.value = fri,
+		},
+		.in_args[1] = (struct bpf_fuse_arg) {
+			.size = oldent->d_name.len + 1,
+			.max_size = NAME_MAX + 1,
+			.flags = BPF_FUSE_IMMUTABLE,
+			.value =  (void *) oldent->d_name.name,
+		},
+		.in_args[2] = (struct bpf_fuse_arg) {
+			.size = newent->d_name.len + 1,
+			.max_size = NAME_MAX + 1,
+			.flags = BPF_FUSE_IMMUTABLE,
+			.value =  (void *) newent->d_name.name,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_rename2_initialize_out(struct bpf_fuse_args *fa, struct fuse_rename2_in *fri,
+				struct inode *olddir, struct dentry *oldent,
+				struct inode *newdir, struct dentry *newent,
+				unsigned int flags)
+{
+	return 0;
+}
+
+int fuse_rename2_backing(struct bpf_fuse_args *fa, int *out,
+			 struct inode *olddir, struct dentry *oldent,
+			 struct inode *newdir, struct dentry *newent,
+			 unsigned int flags)
+{
+	const struct fuse_rename2_in *fri = fa->in_args[0].value;
+
+	/* TODO: deal with changing dirs/ents */
+	*out = fuse_rename_backing_common(olddir, oldent, newdir, newent,
+					  fri->flags);
+	return *out;
+}
+
+int fuse_rename2_finalize(struct bpf_fuse_args *fa, int *out,
+			  struct inode *olddir, struct dentry *oldent,
+			  struct inode *newdir, struct dentry *newent,
+			  unsigned int flags)
+{
+	return 0;
+}
+
+int fuse_rename_initialize_in(struct bpf_fuse_args *fa, struct fuse_rename_in *fri,
+			      struct inode *olddir, struct dentry *oldent,
+			      struct inode *newdir, struct dentry *newent)
+{
+	*fri = (struct fuse_rename_in) {
+		.newdir = get_node_id(newdir),
+	};
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(olddir),
+		.opcode = FUSE_RENAME,
+		.in_numargs = 3,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = sizeof(*fri),
+			.value = fri,
+		},
+		.in_args[1] = (struct bpf_fuse_arg) {
+			.size = oldent->d_name.len + 1,
+			.max_size = NAME_MAX + 1,
+			.flags = BPF_FUSE_IMMUTABLE,
+			.value =  (void *) oldent->d_name.name,
+		},
+		.in_args[2] = (struct bpf_fuse_arg) {
+			.size = newent->d_name.len + 1,
+			.max_size = NAME_MAX + 1,
+			.flags = BPF_FUSE_IMMUTABLE,
+			.value =  (void *) newent->d_name.name,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_rename_initialize_out(struct bpf_fuse_args *fa, struct fuse_rename_in *fri,
+			       struct inode *olddir, struct dentry *oldent,
+			       struct inode *newdir, struct dentry *newent)
+{
+	return 0;
+}
+
+int fuse_rename_backing(struct bpf_fuse_args *fa, int *out,
+			struct inode *olddir, struct dentry *oldent,
+			struct inode *newdir, struct dentry *newent)
+{
+	/* TODO: deal with changing dirs/ents */
+	*out = fuse_rename_backing_common(olddir, oldent, newdir, newent, 0);
+	return *out;
+}
+
+int fuse_rename_finalize(struct bpf_fuse_args *fa, int *out,
+			 struct inode *olddir, struct dentry *oldent,
+			 struct inode *newdir, struct dentry *newent)
+{
+	return 0;
+}
+
 int fuse_unlink_initialize_in(struct bpf_fuse_args *fa, struct fuse_dummy_io *dummy,
 			      struct inode *dir, struct dentry *entry)
 {
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index f159b9a6d305..7c9d8540668c 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1151,6 +1151,16 @@ static int fuse_rename2(struct user_namespace *mnt_userns, struct inode *olddir,
 		return -EINVAL;
 
 	if (flags) {
+#ifdef CONFIG_FUSE_BPF
+		if (fuse_bpf_backing(olddir, struct fuse_rename2_in, err,
+						fuse_rename2_initialize_in,
+						fuse_rename2_initialize_out, fuse_rename2_backing,
+						fuse_rename2_finalize,
+						olddir, oldent, newdir, newent, flags))
+			return err;
+#endif
+
+		/* TODO: how should this go with bpfs involved? */
 		if (fc->no_rename2 || fc->minor < 23)
 			return -EINVAL;
 
@@ -1162,6 +1172,15 @@ static int fuse_rename2(struct user_namespace *mnt_userns, struct inode *olddir,
 			err = -EINVAL;
 		}
 	} else {
+#ifdef CONFIG_FUSE_BPF
+		if (fuse_bpf_backing(olddir, struct fuse_rename_in, err,
+						fuse_rename_initialize_in,
+						fuse_rename_initialize_out, fuse_rename_backing,
+						fuse_rename_finalize,
+						olddir, oldent, newdir, newent))
+			return err;
+#endif
+
 		err = fuse_rename_common(olddir, oldent, newdir, newent, 0,
 					 FUSE_RENAME,
 					 sizeof(struct fuse_rename_in));
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index db769dd0a2e4..6c2f75ae9a5a 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1465,6 +1465,36 @@ int fuse_rmdir_backing(struct bpf_fuse_args *fa, int *out, struct inode *dir, st
 int fuse_rmdir_finalize(struct bpf_fuse_args *fa, int *out,
 			struct inode *dir, struct dentry *entry);
 
+int fuse_rename2_initialize_in(struct bpf_fuse_args *fa, struct fuse_rename2_in *fri,
+			       struct inode *olddir, struct dentry *oldent,
+			       struct inode *newdir, struct dentry *newent,
+			       unsigned int flags);
+int fuse_rename2_initialize_out(struct bpf_fuse_args *fa, struct fuse_rename2_in *fri,
+				struct inode *olddir, struct dentry *oldent,
+				struct inode *newdir, struct dentry *newent,
+				unsigned int flags);
+int fuse_rename2_backing(struct bpf_fuse_args *fa, int *out,
+			 struct inode *olddir, struct dentry *oldent,
+			 struct inode *newdir, struct dentry *newent,
+			 unsigned int flags);
+int fuse_rename2_finalize(struct bpf_fuse_args *fa, int *out,
+			  struct inode *olddir, struct dentry *oldent,
+			  struct inode *newdir, struct dentry *newent,
+			  unsigned int flags);
+
+int fuse_rename_initialize_in(struct bpf_fuse_args *fa, struct fuse_rename_in *fri,
+			      struct inode *olddir, struct dentry *oldent,
+			      struct inode *newdir, struct dentry *newent);
+int fuse_rename_initialize_out(struct bpf_fuse_args *fa, struct fuse_rename_in *fri,
+			       struct inode *olddir, struct dentry *oldent,
+			       struct inode *newdir, struct dentry *newent);
+int fuse_rename_backing(struct bpf_fuse_args *fa, int *out,
+			struct inode *olddir, struct dentry *oldent,
+			struct inode *newdir, struct dentry *newent);
+int fuse_rename_finalize(struct bpf_fuse_args *fa, int *out,
+			 struct inode *olddir, struct dentry *oldent,
+			 struct inode *newdir, struct dentry *newent);
+
 int fuse_unlink_initialize_in(struct bpf_fuse_args *fa, struct fuse_dummy_io *fmi,
 			      struct inode *dir, struct dentry *entry);
 int fuse_unlink_initialize_out(struct bpf_fuse_args *fa, struct fuse_dummy_io *fmi,
-- 
2.37.3.998.g577e59143f-goog

[PATCH 19/26] fuse-bpf: Add attr support

[Daniel Rosenberg]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c | 264 ++++++++++++++++++++++++++++++++++++++++++++++
 fs/fuse/dir.c     |  84 +++++----------
 fs/fuse/fuse_i.h  | 141 +++++++++++++++++++++++++
 fs/fuse/inode.c   |  22 ++--
 4 files changed, 441 insertions(+), 70 deletions(-)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index f4ab92dc8099..13075eddeb7e 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -1626,6 +1626,270 @@ int fuse_unlink_finalize(struct bpf_fuse_args *fa, int *out,
 	return 0;
 }
 
+int fuse_getattr_initialize_in(struct bpf_fuse_args *fa, struct fuse_getattr_io *fgio,
+			       const struct dentry *entry, struct kstat *stat,
+			       u32 request_mask, unsigned int flags)
+{
+	fgio->fgi = (struct fuse_getattr_in) {
+		.getattr_flags = flags,
+		.fh = -1, /* TODO is this OK? */
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(entry->d_inode),
+		.opcode = FUSE_GETATTR,
+		.in_numargs = 1,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = sizeof(fgio->fgi),
+			.value = &fgio->fgi,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_getattr_initialize_out(struct bpf_fuse_args *fa, struct fuse_getattr_io *fgio,
+				const struct dentry *entry, struct kstat *stat,
+				u32 request_mask, unsigned int flags)
+{
+	fgio->fao = (struct fuse_attr_out) { 0 };
+
+	fa->out_numargs = 1;
+	fa->out_args[0] = (struct bpf_fuse_arg) {
+		.size = sizeof(fgio->fao),
+		.value = &fgio->fao,
+	};
+
+	return 0;
+}
+
+static void fuse_stat_to_attr(struct fuse_conn *fc, struct inode *inode,
+			      struct kstat *stat, struct fuse_attr *attr)
+{
+	unsigned int blkbits;
+
+	/* see the comment in fuse_change_attributes() */
+	if (fc->writeback_cache && S_ISREG(inode->i_mode)) {
+		stat->size = i_size_read(inode);
+		stat->mtime.tv_sec = inode->i_mtime.tv_sec;
+		stat->mtime.tv_nsec = inode->i_mtime.tv_nsec;
+		stat->ctime.tv_sec = inode->i_ctime.tv_sec;
+		stat->ctime.tv_nsec = inode->i_ctime.tv_nsec;
+	}
+
+	attr->ino = stat->ino;
+	attr->mode = (inode->i_mode & S_IFMT) | (stat->mode & 07777);
+	attr->nlink = stat->nlink;
+	attr->uid = from_kuid(fc->user_ns, stat->uid);
+	attr->gid = from_kgid(fc->user_ns, stat->gid);
+	attr->atime = stat->atime.tv_sec;
+	attr->atimensec = stat->atime.tv_nsec;
+	attr->mtime = stat->mtime.tv_sec;
+	attr->mtimensec = stat->mtime.tv_nsec;
+	attr->ctime = stat->ctime.tv_sec;
+	attr->ctimensec = stat->ctime.tv_nsec;
+	attr->size = stat->size;
+	attr->blocks = stat->blocks;
+
+	if (stat->blksize != 0)
+		blkbits = ilog2(stat->blksize);
+	else
+		blkbits = inode->i_sb->s_blocksize_bits;
+
+	attr->blksize = 1 << blkbits;
+}
+
+int fuse_getattr_backing(struct bpf_fuse_args *fa, int *out,
+			 const struct dentry *entry, struct kstat *stat,
+			 u32 request_mask, unsigned int flags)
+{
+	struct path *backing_path = &get_fuse_dentry(entry)->backing_path;
+	struct inode *backing_inode = backing_path->dentry->d_inode;
+	struct fuse_attr_out *fao = fa->out_args[0].value;
+	struct kstat tmp;
+
+	if (!stat)
+		stat = &tmp;
+
+	*out = vfs_getattr(backing_path, stat, request_mask, flags);
+
+	if (!*out)
+		fuse_stat_to_attr(get_fuse_conn(entry->d_inode), backing_inode,
+				  stat, &fao->attr);
+
+	return 0;
+}
+
+int fuse_getattr_finalize(struct bpf_fuse_args *fa, int *out,
+			  const struct dentry *entry, struct kstat *stat,
+			  u32 request_mask, unsigned int flags)
+{
+	struct fuse_attr_out *outarg = fa->out_args[0].value;
+	struct inode *inode = entry->d_inode;
+	u64 attr_version = fuse_get_attr_version(get_fuse_mount(inode)->fc);
+
+	/* TODO: Ensure this doesn't happen if we had an error getting attrs in
+	 * backing.
+	 */
+	*out = finalize_attr(inode, outarg, attr_version, stat);
+	return 0;
+}
+
+static void fattr_to_iattr(struct fuse_conn *fc,
+			   const struct fuse_setattr_in *arg,
+			   struct iattr *iattr)
+{
+	unsigned int fvalid = arg->valid;
+
+	if (fvalid & FATTR_MODE)
+		iattr->ia_valid |= ATTR_MODE, iattr->ia_mode = arg->mode;
+	if (fvalid & FATTR_UID) {
+		iattr->ia_valid |= ATTR_UID;
+		iattr->ia_uid = make_kuid(fc->user_ns, arg->uid);
+	}
+	if (fvalid & FATTR_GID) {
+		iattr->ia_valid |= ATTR_GID;
+		iattr->ia_gid = make_kgid(fc->user_ns, arg->gid);
+	}
+	if (fvalid & FATTR_SIZE)
+		iattr->ia_valid |= ATTR_SIZE, iattr->ia_size = arg->size;
+	if (fvalid & FATTR_ATIME) {
+		iattr->ia_valid |= ATTR_ATIME;
+		iattr->ia_atime.tv_sec = arg->atime;
+		iattr->ia_atime.tv_nsec = arg->atimensec;
+		if (!(fvalid & FATTR_ATIME_NOW))
+			iattr->ia_valid |= ATTR_ATIME_SET;
+	}
+	if (fvalid & FATTR_MTIME) {
+		iattr->ia_valid |= ATTR_MTIME;
+		iattr->ia_mtime.tv_sec = arg->mtime;
+		iattr->ia_mtime.tv_nsec = arg->mtimensec;
+		if (!(fvalid & FATTR_MTIME_NOW))
+			iattr->ia_valid |= ATTR_MTIME_SET;
+	}
+	if (fvalid & FATTR_CTIME) {
+		iattr->ia_valid |= ATTR_CTIME;
+		iattr->ia_ctime.tv_sec = arg->ctime;
+		iattr->ia_ctime.tv_nsec = arg->ctimensec;
+	}
+}
+
+int fuse_setattr_initialize_in(struct bpf_fuse_args *fa, struct fuse_setattr_io *fsio,
+			       struct dentry *dentry, struct iattr *attr, struct file *file)
+{
+	struct fuse_conn *fc = get_fuse_conn(dentry->d_inode);
+
+	*fsio = (struct fuse_setattr_io) { 0 };
+	iattr_to_fattr(fc, attr, &fsio->fsi, true);
+
+	*fa = (struct bpf_fuse_args) {
+		.opcode = FUSE_SETATTR,
+		.nodeid = get_node_id(dentry->d_inode),
+		.in_numargs = 1,
+		.in_args[0].size = sizeof(fsio->fsi),
+		.in_args[0].value = &fsio->fsi,
+	};
+
+	return 0;
+}
+
+int fuse_setattr_initialize_out(struct bpf_fuse_args *fa, struct fuse_setattr_io *fsio,
+				struct dentry *dentry, struct iattr *attr, struct file *file)
+{
+	fa->out_numargs = 1;
+	fa->out_args[0].size = sizeof(fsio->fao);
+	fa->out_args[0].value = &fsio->fao;
+
+	return 0;
+}
+
+int fuse_setattr_backing(struct bpf_fuse_args *fa, int *out,
+			 struct dentry *dentry, struct iattr *attr, struct file *file)
+{
+	struct fuse_conn *fc = get_fuse_conn(dentry->d_inode);
+	const struct fuse_setattr_in *fsi = fa->in_args[0].value;
+	struct iattr new_attr = { 0 };
+	struct path *backing_path = &get_fuse_dentry(dentry)->backing_path;
+
+	fattr_to_iattr(fc, fsi, &new_attr);
+	/* TODO: Some info doesn't get saved by the attr->fattr->attr transition
+	 * When we actually allow the bpf to change these, we may have to consider
+	 * the extra flags more, or pass more info into the bpf. Until then we can
+	 * keep everything except for ATTR_FILE, since we'd need a file on the
+	 * lower fs. For what it's worth, neither f2fs nor ext4 make use of that
+	 * even if it is present.
+	 */
+	new_attr.ia_valid = attr->ia_valid & ~ATTR_FILE;
+	inode_lock(d_inode(backing_path->dentry));
+	*out = notify_change(&init_user_ns, backing_path->dentry, &new_attr,
+			    NULL);
+	inode_unlock(d_inode(backing_path->dentry));
+
+	if (*out == 0 && (new_attr.ia_valid & ATTR_SIZE))
+		i_size_write(dentry->d_inode, new_attr.ia_size);
+	return 0;
+}
+
+int fuse_setattr_finalize(struct bpf_fuse_args *fa, int *out,
+			  struct dentry *dentry, struct iattr *attr, struct file *file)
+{
+	return 0;
+}
+
+int fuse_statfs_initialize_in(struct bpf_fuse_args *fa, struct fuse_statfs_out *fso,
+			      struct dentry *dentry, struct kstatfs *buf)
+{
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(d_inode(dentry)),
+		.opcode = FUSE_STATFS,
+	};
+
+	return 0;
+}
+
+int fuse_statfs_initialize_out(struct bpf_fuse_args *fa, struct fuse_statfs_out *fso,
+			       struct dentry *dentry, struct kstatfs *buf)
+{
+	*fso = (struct fuse_statfs_out) { 0 };
+
+	fa->out_numargs = 1;
+	fa->out_args[0].size = sizeof(fso);
+	fa->out_args[0].value = fso;
+
+	return 0;
+}
+
+int fuse_statfs_backing(struct bpf_fuse_args *fa, int *out,
+			struct dentry *dentry, struct kstatfs *buf)
+{
+	struct path backing_path;
+	struct fuse_statfs_out *fso = fa->out_args[0].value;
+
+	*out = 0;
+	get_fuse_backing_path(dentry, &backing_path);
+	if (!backing_path.dentry)
+		return -EBADF;
+	*out = vfs_statfs(&backing_path, buf);
+	path_put(&backing_path);
+	buf->f_type = FUSE_SUPER_MAGIC;
+
+	//TODO Provide postfilter opportunity to modify
+	if (!*out)
+		convert_statfs_to_fuse(&fso->st, buf);
+
+	return 0;
+}
+
+int fuse_statfs_finalize(struct bpf_fuse_args *fa, int *out,
+			 struct dentry *dentry, struct kstatfs *buf)
+{
+	struct fuse_statfs_out *fso = fa->out_args[0].value;
+
+	if (!fa->error_in)
+		convert_fuse_statfs(buf, &fso->st);
+	return 0;
+}
+
 int fuse_readdir_initialize_in(struct bpf_fuse_args *fa, struct fuse_read_io *frio,
 			    struct file *file, struct dir_context *ctx,
 			    bool *force_again, bool *allow_force, bool is_continued)
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 7c9d8540668c..af1f715a405d 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1215,7 +1215,7 @@ static int fuse_link(struct dentry *entry, struct inode *newdir,
 	return err;
 }
 
-static void fuse_fillattr(struct inode *inode, struct fuse_attr *attr,
+void fuse_fillattr(struct inode *inode, struct fuse_attr *attr,
 			  struct kstat *stat)
 {
 	unsigned int blkbits;
@@ -1292,6 +1292,7 @@ static int fuse_do_getattr(struct inode *inode, struct kstat *stat,
 }
 
 static int fuse_update_get_attr(struct inode *inode, struct file *file,
+				const struct path *path,
 				struct kstat *stat, u32 request_mask,
 				unsigned int flags)
 {
@@ -1301,6 +1302,14 @@ static int fuse_update_get_attr(struct inode *inode, struct file *file,
 	u32 inval_mask = READ_ONCE(fi->inval_mask);
 	u32 cache_mask = fuse_get_cache_mask(inode);
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(inode, struct fuse_getattr_io, err,
+			       fuse_getattr_initialize_in, fuse_getattr_initialize_out,
+			       fuse_getattr_backing, fuse_getattr_finalize,
+			       path->dentry, stat, request_mask, flags))
+		return err;
+#endif
+
 	if (flags & AT_STATX_FORCE_SYNC)
 		sync = true;
 	else if (flags & AT_STATX_DONT_SYNC)
@@ -1324,7 +1333,7 @@ static int fuse_update_get_attr(struct inode *inode, struct file *file,
 
 int fuse_update_attributes(struct inode *inode, struct file *file, u32 mask)
 {
-	return fuse_update_get_attr(inode, file, NULL, mask, 0);
+	return fuse_update_get_attr(inode, file, &file->f_path, NULL, mask, 0);
 }
 
 int fuse_reverse_inval_entry(struct fuse_conn *fc, u64 parent_nodeid,
@@ -1703,58 +1712,6 @@ static long fuse_dir_compat_ioctl(struct file *file, unsigned int cmd,
 				 FUSE_IOCTL_COMPAT | FUSE_IOCTL_DIR);
 }
 
-static inline bool update_mtime(unsigned int ivalid, bool trust_local_mtime)
-{
-	/* Always update if mtime is explicitly set  */
-	if (ivalid & ATTR_MTIME_SET)
-		return true;
-
-	/* Or if kernel i_mtime is the official one */
-	if (trust_local_mtime)
-		return true;
-
-	/* If it's an open(O_TRUNC) or an ftruncate(), don't update */
-	if ((ivalid & ATTR_SIZE) && (ivalid & (ATTR_OPEN | ATTR_FILE)))
-		return false;
-
-	/* In all other cases update */
-	return true;
-}
-
-static void iattr_to_fattr(struct fuse_conn *fc, struct iattr *iattr,
-			   struct fuse_setattr_in *arg, bool trust_local_cmtime)
-{
-	unsigned ivalid = iattr->ia_valid;
-
-	if (ivalid & ATTR_MODE)
-		arg->valid |= FATTR_MODE,   arg->mode = iattr->ia_mode;
-	if (ivalid & ATTR_UID)
-		arg->valid |= FATTR_UID,    arg->uid = from_kuid(fc->user_ns, iattr->ia_uid);
-	if (ivalid & ATTR_GID)
-		arg->valid |= FATTR_GID,    arg->gid = from_kgid(fc->user_ns, iattr->ia_gid);
-	if (ivalid & ATTR_SIZE)
-		arg->valid |= FATTR_SIZE,   arg->size = iattr->ia_size;
-	if (ivalid & ATTR_ATIME) {
-		arg->valid |= FATTR_ATIME;
-		arg->atime = iattr->ia_atime.tv_sec;
-		arg->atimensec = iattr->ia_atime.tv_nsec;
-		if (!(ivalid & ATTR_ATIME_SET))
-			arg->valid |= FATTR_ATIME_NOW;
-	}
-	if ((ivalid & ATTR_MTIME) && update_mtime(ivalid, trust_local_cmtime)) {
-		arg->valid |= FATTR_MTIME;
-		arg->mtime = iattr->ia_mtime.tv_sec;
-		arg->mtimensec = iattr->ia_mtime.tv_nsec;
-		if (!(ivalid & ATTR_MTIME_SET) && !trust_local_cmtime)
-			arg->valid |= FATTR_MTIME_NOW;
-	}
-	if ((ivalid & ATTR_CTIME) && trust_local_cmtime) {
-		arg->valid |= FATTR_CTIME;
-		arg->ctime = iattr->ia_ctime.tv_sec;
-		arg->ctimensec = iattr->ia_ctime.tv_nsec;
-	}
-}
-
 /*
  * Prevent concurrent writepages on inode
  *
@@ -1869,6 +1826,13 @@ int fuse_do_setattr(struct dentry *dentry, struct iattr *attr,
 	bool trust_local_cmtime = is_wb;
 	bool fault_blocked = false;
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(inode, struct fuse_setattr_io, err,
+			       fuse_setattr_initialize_in, fuse_setattr_initialize_out,
+			       fuse_setattr_backing, fuse_setattr_finalize, dentry, attr, file))
+		return err;
+#endif
+
 	if (!fc->default_permissions)
 		attr->ia_valid |= ATTR_FORCE;
 
@@ -2044,11 +2008,19 @@ static int fuse_setattr(struct user_namespace *mnt_userns, struct dentry *entry,
 		 * This should be done on write(), truncate() and chown().
 		 */
 		if (!fc->handle_killpriv && !fc->handle_killpriv_v2) {
+#ifdef CONFIG_FUSE_BPF
 			/*
 			 * ia_mode calculation may have used stale i_mode.
 			 * Refresh and recalculate.
 			 */
-			ret = fuse_do_getattr(inode, NULL, file);
+			if (!fuse_bpf_backing(inode, struct fuse_getattr_io, ret,
+					       fuse_getattr_initialize_in,
+					       fuse_getattr_initialize_out,
+					       fuse_getattr_backing,
+					       fuse_getattr_finalize,
+					       entry, NULL, 0, 0))
+#endif
+				ret = fuse_do_getattr(inode, NULL, file);
 			if (ret)
 				return ret;
 
@@ -2105,7 +2077,7 @@ static int fuse_getattr(struct user_namespace *mnt_userns,
 		return -EACCES;
 	}
 
-	return fuse_update_get_attr(inode, NULL, stat, request_mask, flags);
+	return fuse_update_get_attr(inode, NULL, path, stat, request_mask, flags);
 }
 
 static const struct inode_operations fuse_dir_inode_operations = {
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 6c2f75ae9a5a..f8eddcb24137 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1623,6 +1623,46 @@ int fuse_lookup_finalize(struct bpf_fuse_args *fa, struct dentry **out,
 			 struct inode *dir, struct dentry *entry, unsigned int flags);
 int fuse_revalidate_backing(struct dentry *entry, unsigned int flags);
 
+struct fuse_getattr_io {
+	struct fuse_getattr_in fgi;
+	struct fuse_attr_out fao;
+};
+int fuse_getattr_initialize_in(struct bpf_fuse_args *fa, struct fuse_getattr_io *fgio,
+			       const struct dentry *entry, struct kstat *stat,
+			       u32 request_mask, unsigned int flags);
+int fuse_getattr_initialize_out(struct bpf_fuse_args *fa, struct fuse_getattr_io *fgio,
+				const struct dentry *entry, struct kstat *stat,
+				u32 request_mask, unsigned int flags);
+int fuse_getattr_backing(struct bpf_fuse_args *fa, int *out,
+			 const struct dentry *entry, struct kstat *stat,
+			 u32 request_mask, unsigned int flags);
+int fuse_getattr_finalize(struct bpf_fuse_args *fa, int *out,
+			  const struct dentry *entry, struct kstat *stat,
+			  u32 request_mask, unsigned int flags);
+
+struct fuse_setattr_io {
+	struct fuse_setattr_in fsi;
+	struct fuse_attr_out fao;
+};
+
+int fuse_setattr_initialize_in(struct bpf_fuse_args *fa, struct fuse_setattr_io *fsi,
+			       struct dentry *dentry, struct iattr *attr, struct file *file);
+int fuse_setattr_initialize_out(struct bpf_fuse_args *fa, struct fuse_setattr_io *fsi,
+				struct dentry *dentry, struct iattr *attr, struct file *file);
+int fuse_setattr_backing(struct bpf_fuse_args *fa, int *out,
+			 struct dentry *dentry, struct iattr *attr, struct file *file);
+int fuse_setattr_finalize(struct bpf_fuse_args *fa, int *out,
+			  struct dentry *dentry, struct iattr *attr, struct file *file);
+
+int fuse_statfs_initialize_in(struct bpf_fuse_args *fa, struct fuse_statfs_out *fso,
+			      struct dentry *dentry, struct kstatfs *buf);
+int fuse_statfs_initialize_out(struct bpf_fuse_args *fa, struct fuse_statfs_out *fso,
+			       struct dentry *dentry, struct kstatfs *buf);
+int fuse_statfs_backing(struct bpf_fuse_args *fa, int *out,
+			struct dentry *dentry, struct kstatfs *buf);
+int fuse_statfs_finalize(struct bpf_fuse_args *fa, int *out,
+			 struct dentry *dentry, struct kstatfs *buf);
+
 struct fuse_read_io {
 	struct fuse_read_in fri;
 	struct fuse_read_out fro;
@@ -1675,6 +1715,107 @@ static inline u64 attr_timeout(struct fuse_attr_out *o)
 	return time_to_jiffies(o->attr_valid, o->attr_valid_nsec);
 }
 
+static inline bool update_mtime(unsigned int ivalid, bool trust_local_mtime)
+{
+	/* Always update if mtime is explicitly set  */
+	if (ivalid & ATTR_MTIME_SET)
+		return true;
+
+	/* Or if kernel i_mtime is the official one */
+	if (trust_local_mtime)
+		return true;
+
+	/* If it's an open(O_TRUNC) or an ftruncate(), don't update */
+	if ((ivalid & ATTR_SIZE) && (ivalid & (ATTR_OPEN | ATTR_FILE)))
+		return false;
+
+	/* In all other cases update */
+	return true;
+}
+
+void fuse_fillattr(struct inode *inode, struct fuse_attr *attr,
+			  struct kstat *stat);
+
+static inline void iattr_to_fattr(struct fuse_conn *fc, struct iattr *iattr,
+			   struct fuse_setattr_in *arg, bool trust_local_cmtime)
+{
+	unsigned int ivalid = iattr->ia_valid;
+
+	if (ivalid & ATTR_MODE)
+		arg->valid |= FATTR_MODE,   arg->mode = iattr->ia_mode;
+	if (ivalid & ATTR_UID)
+		arg->valid |= FATTR_UID,    arg->uid = from_kuid(fc->user_ns, iattr->ia_uid);
+	if (ivalid & ATTR_GID)
+		arg->valid |= FATTR_GID,    arg->gid = from_kgid(fc->user_ns, iattr->ia_gid);
+	if (ivalid & ATTR_SIZE)
+		arg->valid |= FATTR_SIZE,   arg->size = iattr->ia_size;
+	if (ivalid & ATTR_ATIME) {
+		arg->valid |= FATTR_ATIME;
+		arg->atime = iattr->ia_atime.tv_sec;
+		arg->atimensec = iattr->ia_atime.tv_nsec;
+		if (!(ivalid & ATTR_ATIME_SET))
+			arg->valid |= FATTR_ATIME_NOW;
+	}
+	if ((ivalid & ATTR_MTIME) && update_mtime(ivalid, trust_local_cmtime)) {
+		arg->valid |= FATTR_MTIME;
+		arg->mtime = iattr->ia_mtime.tv_sec;
+		arg->mtimensec = iattr->ia_mtime.tv_nsec;
+		if (!(ivalid & ATTR_MTIME_SET) && !trust_local_cmtime)
+			arg->valid |= FATTR_MTIME_NOW;
+	}
+	if ((ivalid & ATTR_CTIME) && trust_local_cmtime) {
+		arg->valid |= FATTR_CTIME;
+		arg->ctime = iattr->ia_ctime.tv_sec;
+		arg->ctimensec = iattr->ia_ctime.tv_nsec;
+	}
+}
+
+static inline int finalize_attr(struct inode *inode, struct fuse_attr_out *outarg,
+				u64 attr_version, struct kstat *stat)
+{
+	int err = 0;
+
+	if (fuse_invalid_attr(&outarg->attr) ||
+	    ((inode->i_mode ^ outarg->attr.mode) & S_IFMT)) {
+		fuse_make_bad(inode);
+		err = -EIO;
+	} else {
+		fuse_change_attributes(inode, &outarg->attr,
+				       attr_timeout(outarg),
+				       attr_version);
+		if (stat)
+			fuse_fillattr(inode, &outarg->attr, stat);
+	}
+	return err;
+}
+
+static inline void convert_statfs_to_fuse(struct fuse_kstatfs *attr, struct kstatfs *stbuf)
+{
+	attr->bsize   = stbuf->f_bsize;
+	attr->frsize  = stbuf->f_frsize;
+	attr->blocks  = stbuf->f_blocks;
+	attr->bfree   = stbuf->f_bfree;
+	attr->bavail  = stbuf->f_bavail;
+	attr->files   = stbuf->f_files;
+	attr->ffree   = stbuf->f_ffree;
+	attr->namelen = stbuf->f_namelen;
+	/* fsid is left zero */
+}
+
+static inline void convert_fuse_statfs(struct kstatfs *stbuf, struct fuse_kstatfs *attr)
+{
+	stbuf->f_type    = FUSE_SUPER_MAGIC;
+	stbuf->f_bsize   = attr->bsize;
+	stbuf->f_frsize  = attr->frsize;
+	stbuf->f_blocks  = attr->blocks;
+	stbuf->f_bfree   = attr->bfree;
+	stbuf->f_bavail  = attr->bavail;
+	stbuf->f_files   = attr->files;
+	stbuf->f_ffree   = attr->ffree;
+	stbuf->f_namelen = attr->namelen;
+	/* fsid is left zero */
+}
+
 #ifdef CONFIG_FUSE_BPF
 int __init fuse_bpf_init(void);
 void __exit fuse_bpf_cleanup(void);
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index c96cfcbfd96a..d178c3eb445f 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -620,20 +620,6 @@ static void fuse_send_destroy(struct fuse_mount *fm)
 	}
 }
 
-static void convert_fuse_statfs(struct kstatfs *stbuf, struct fuse_kstatfs *attr)
-{
-	stbuf->f_type    = FUSE_SUPER_MAGIC;
-	stbuf->f_bsize   = attr->bsize;
-	stbuf->f_frsize  = attr->frsize;
-	stbuf->f_blocks  = attr->blocks;
-	stbuf->f_bfree   = attr->bfree;
-	stbuf->f_bavail  = attr->bavail;
-	stbuf->f_files   = attr->files;
-	stbuf->f_ffree   = attr->ffree;
-	stbuf->f_namelen = attr->namelen;
-	/* fsid is left zero */
-}
-
 static int fuse_statfs(struct dentry *dentry, struct kstatfs *buf)
 {
 	struct super_block *sb = dentry->d_sb;
@@ -647,6 +633,14 @@ static int fuse_statfs(struct dentry *dentry, struct kstatfs *buf)
 		return 0;
 	}
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(dentry->d_inode, struct fuse_statfs_out, err,
+			       fuse_statfs_initialize_in, fuse_statfs_initialize_out,
+			       fuse_statfs_backing, fuse_statfs_finalize,
+			       dentry, buf))
+		return err;
+#endif
+
 	memset(&outarg, 0, sizeof(outarg));
 	args.in_numargs = 0;
 	args.opcode = FUSE_STATFS;
-- 
2.37.3.998.g577e59143f-goog

[PATCH 20/26] fuse-bpf: Add support for FUSE_COPY_FILE_RANGE

[Daniel Rosenberg]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++
 fs/fuse/file.c    | 10 +++++++
 fs/fuse/fuse_i.h  | 24 +++++++++++++++++
 3 files changed, 102 insertions(+)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index 13075eddeb7e..8fd5cbfdd4fa 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -553,6 +553,74 @@ int fuse_lseek_finalize(struct bpf_fuse_args *fa, loff_t *out,
 	return 0;
 }
 
+int fuse_copy_file_range_initialize_in(struct bpf_fuse_args *fa,
+					struct fuse_copy_file_range_io *fcf,
+					struct file *file_in, loff_t pos_in, struct file *file_out,
+					loff_t pos_out, size_t len, unsigned int flags)
+{
+	struct fuse_file *fuse_file_in = file_in->private_data;
+	struct fuse_file *fuse_file_out = file_out->private_data;
+
+	fcf->fci = (struct fuse_copy_file_range_in) {
+		.fh_in = fuse_file_in->fh,
+		.off_in = pos_in,
+		.nodeid_out = fuse_file_out->nodeid,
+		.fh_out = fuse_file_out->fh,
+		.off_out = pos_out,
+		.len = len,
+		.flags = flags,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(file_in->f_inode),
+		.opcode = FUSE_COPY_FILE_RANGE,
+		.in_numargs = 1,
+		.in_args[0].size = sizeof(fcf->fci),
+		.in_args[0].value = &fcf->fci,
+	};
+
+	return 0;
+}
+
+int fuse_copy_file_range_initialize_out(struct bpf_fuse_args *fa,
+					struct fuse_copy_file_range_io *fcf,
+					struct file *file_in, loff_t pos_in, struct file *file_out,
+					loff_t pos_out, size_t len, unsigned int flags)
+{
+	fa->out_numargs = 1;
+	fa->out_args[0].size = sizeof(fcf->fwo);
+	fa->out_args[0].value = &fcf->fwo;
+
+	return 0;
+}
+
+int fuse_copy_file_range_backing(struct bpf_fuse_args *fa, ssize_t *out, struct file *file_in,
+				 loff_t pos_in, struct file *file_out, loff_t pos_out, size_t len,
+				 unsigned int flags)
+{
+	const struct fuse_copy_file_range_in *fci = fa->in_args[0].value;
+	struct fuse_file *fuse_file_in = file_in->private_data;
+	struct file *backing_file_in = fuse_file_in->backing_file;
+	struct fuse_file *fuse_file_out = file_out->private_data;
+	struct file *backing_file_out = fuse_file_out->backing_file;
+
+	/* TODO: Handle changing of in/out files */
+	if (backing_file_out)
+		*out = vfs_copy_file_range(backing_file_in, fci->off_in, backing_file_out,
+					   fci->off_out, fci->len, fci->flags);
+	else
+		*out = generic_copy_file_range(file_in, pos_in, file_out, pos_out, len,
+					       flags);
+	return 0;
+}
+
+int fuse_copy_file_range_finalize(struct bpf_fuse_args *fa, ssize_t *out, struct file *file_in,
+				  loff_t pos_in, struct file *file_out, loff_t pos_out, size_t len,
+				  unsigned int flags)
+{
+	return 0;
+}
+
 int fuse_fsync_initialize_in(struct bpf_fuse_args *fa, struct fuse_fsync_in *ffi,
 			     struct file *file, loff_t start, loff_t end, int datasync)
 {
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index fc8f8e3a06b3..85aeb6ade085 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -3180,6 +3180,16 @@ static ssize_t __fuse_copy_file_range(struct file *file_in, loff_t pos_in,
 	bool is_unstable = (!fc->writeback_cache) &&
 			   ((pos_out + len) > inode_out->i_size);
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(file_in->f_inode, struct fuse_copy_file_range_io, err,
+			       fuse_copy_file_range_initialize_in,
+			       fuse_copy_file_range_initialize_out,
+			       fuse_copy_file_range_backing,
+			       fuse_copy_file_range_finalize,
+			       file_in, pos_in, file_out, pos_out, len, flags))
+		return err;
+#endif
+
 	if (fc->no_copy_file_range)
 		return -EOPNOTSUPP;
 
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index f8eddcb24137..370fe944387e 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1541,6 +1541,30 @@ int fuse_lseek_backing(struct bpf_fuse_args *fa, loff_t *out, struct file *file,
 int fuse_lseek_finalize(struct bpf_fuse_args *fa, loff_t *out, struct file *file,
 			loff_t offset, int whence);
 
+struct fuse_copy_file_range_io {
+	struct fuse_copy_file_range_in fci;
+	struct fuse_write_out fwo;
+};
+
+int fuse_copy_file_range_initialize_in(struct bpf_fuse_args *fa,
+				       struct fuse_copy_file_range_io *fcf,
+				       struct file *file_in, loff_t pos_in,
+				       struct file *file_out, loff_t pos_out,
+				       size_t len, unsigned int flags);
+int fuse_copy_file_range_initialize_out(struct bpf_fuse_args *fa,
+					struct fuse_copy_file_range_io *fcf,
+					struct file *file_in, loff_t pos_in,
+					struct file *file_out, loff_t pos_out,
+					size_t len, unsigned int flags);
+int fuse_copy_file_range_backing(struct bpf_fuse_args *fa, ssize_t *out,
+				 struct file *file_in, loff_t pos_in,
+				 struct file *file_out, loff_t pos_out,
+				 size_t len, unsigned int flags);
+int fuse_copy_file_range_finalize(struct bpf_fuse_args *fa, ssize_t *out,
+				  struct file *file_in, loff_t pos_in,
+				  struct file *file_out, loff_t pos_out,
+				  size_t len, unsigned int flags);
+
 int fuse_fsync_initialize_in(struct bpf_fuse_args *fa, struct fuse_fsync_in *ffi,
 			     struct file *file, loff_t start, loff_t end, int datasync);
 int fuse_fsync_initialize_out(struct bpf_fuse_args *fa, struct fuse_fsync_in *ffi,
-- 
2.37.3.998.g577e59143f-goog

[PATCH 21/26] fuse-bpf: Add xattr support

[Daniel Rosenberg]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c | 257 ++++++++++++++++++++++++++++++++++++++++++++++
 fs/fuse/fuse_i.h  |  55 ++++++++++
 fs/fuse/xattr.c   |  36 +++++++
 3 files changed, 348 insertions(+)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index 8fd5cbfdd4fa..d8c86234f253 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -695,6 +695,263 @@ int fuse_dir_fsync_initialize_out(struct bpf_fuse_args *fa, struct fuse_fsync_in
 	return 0;
 }
 
+int fuse_getxattr_initialize_in(struct bpf_fuse_args *fa,
+				struct fuse_getxattr_io *fgio,
+				struct dentry *dentry, const char *name, void *value,
+				size_t size)
+{
+	*fgio = (struct fuse_getxattr_io) {
+		.fgi.size = size,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_fuse_inode(dentry->d_inode)->nodeid,
+		.opcode = FUSE_GETXATTR,
+		.in_numargs = 2,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = sizeof(fgio->fgi),
+			.value = &fgio->fgi,
+		},
+		.in_args[1] = (struct bpf_fuse_arg) {
+			.size = strlen(name) + 1,
+			.max_size = XATTR_NAME_MAX + 1,
+			.flags = BPF_FUSE_MUST_ALLOCATE | BPF_FUSE_VARIABLE_SIZE,
+			.value =  (void *) name,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_getxattr_initialize_out(struct bpf_fuse_args *fa,
+				 struct fuse_getxattr_io *fgio,
+				 struct dentry *dentry, const char *name, void *value,
+				 size_t size)
+{
+	fa->flags = size ? FUSE_BPF_OUT_ARGVAR : 0;
+	fa->out_numargs = 1;
+	if (size) {
+		fa->out_args[0].size = size;
+		fa->out_args[0].max_size = size;
+		fa->out_args[0].flags = BPF_FUSE_VARIABLE_SIZE;
+		fa->out_args[0].value = value;
+	} else {
+		fa->out_args[0].size = sizeof(fgio->fgo);
+		fa->out_args[0].value = &fgio->fgo;
+	}
+	return 0;
+}
+
+int fuse_getxattr_backing(struct bpf_fuse_args *fa, int *out,
+			  struct dentry *dentry, const char *name, void *value,
+			  size_t size)
+{
+	ssize_t ret = vfs_getxattr(&init_user_ns,
+				   get_fuse_dentry(dentry)->backing_path.dentry,
+				   fa->in_args[1].value, value, size);
+
+	if (fa->flags & FUSE_BPF_OUT_ARGVAR)
+		fa->out_args[0].size = ret;
+	else
+		((struct fuse_getxattr_out *)fa->out_args[0].value)->size = ret;
+
+	return 0;
+}
+
+int fuse_getxattr_finalize(struct bpf_fuse_args *fa, int *out,
+			   struct dentry *dentry, const char *name, void *value,
+			   size_t size)
+{
+	struct fuse_getxattr_out *fgo;
+
+	if (fa->flags & FUSE_BPF_OUT_ARGVAR) {
+		*out = fa->out_args[0].size;
+		return 0;
+	}
+
+	fgo = fa->out_args[0].value;
+
+	*out = fgo->size;
+	return 0;
+}
+
+int fuse_listxattr_initialize_in(struct bpf_fuse_args *fa,
+				 struct fuse_getxattr_io *fgio,
+				 struct dentry *dentry, char *list, size_t size)
+{
+	*fgio = (struct fuse_getxattr_io) {
+		.fgi.size = size,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_fuse_inode(dentry->d_inode)->nodeid,
+		.opcode = FUSE_LISTXATTR,
+		.in_numargs = 1,
+		.in_args[0] =
+			(struct bpf_fuse_arg) {
+				.size = sizeof(fgio->fgi),
+				.value = &fgio->fgi,
+			},
+	};
+
+	return 0;
+}
+
+int fuse_listxattr_initialize_out(struct bpf_fuse_args *fa,
+				  struct fuse_getxattr_io *fgio,
+				  struct dentry *dentry, char *list, size_t size)
+{
+	fa->out_numargs = 1;
+
+	if (size) {
+		fa->flags = FUSE_BPF_OUT_ARGVAR;
+		fa->out_args[0].size = size;
+		fa->out_args[0].max_size = size;
+		fa->out_args[0].flags = BPF_FUSE_VARIABLE_SIZE;
+		fa->out_args[0].value = (void *)list;
+	} else {
+		fa->out_args[0].size = sizeof(fgio->fgo);
+		fa->out_args[0].value = &fgio->fgo;
+	}
+	return 0;
+}
+
+int fuse_listxattr_backing(struct bpf_fuse_args *fa, ssize_t *out, struct dentry *dentry,
+			   char *list, size_t size)
+{
+	*out = vfs_listxattr(get_fuse_dentry(dentry)->backing_path.dentry, list, size);
+
+	if (*out < 0)
+		return *out;
+
+	if (fa->flags & FUSE_BPF_OUT_ARGVAR)
+		fa->out_args[0].size = *out;
+	else
+		((struct fuse_getxattr_out *)fa->out_args[0].value)->size = *out;
+
+	return 0;
+}
+
+int fuse_listxattr_finalize(struct bpf_fuse_args *fa, ssize_t *out, struct dentry *dentry,
+			    char *list, size_t size)
+{
+	struct fuse_getxattr_out *fgo;
+
+	if (fa->error_in)
+		return 0;
+
+	if (fa->flags & FUSE_BPF_OUT_ARGVAR) {
+		*out = fa->out_args[0].size;
+		return 0;
+	}
+
+	fgo = fa->out_args[0].value;
+	*out = fgo->size;
+	return 0;
+}
+
+int fuse_setxattr_initialize_in(struct bpf_fuse_args *fa,
+				struct fuse_setxattr_in *fsxi,
+				struct dentry *dentry, const char *name,
+				const void *value, size_t size, int flags)
+{
+	*fsxi = (struct fuse_setxattr_in) {
+		.size = size,
+		.flags = flags,
+	};
+
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_fuse_inode(dentry->d_inode)->nodeid,
+		.opcode = FUSE_SETXATTR,
+		.in_numargs = 3,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = sizeof(*fsxi),
+			.value = fsxi,
+		},
+		.in_args[1] = (struct bpf_fuse_arg) {
+			.size = strlen(name) + 1,
+			.max_size = XATTR_NAME_MAX + 1,
+			.flags = BPF_FUSE_VARIABLE_SIZE | BPF_FUSE_MUST_ALLOCATE,
+			.value =  (void *) name,
+		},
+		.in_args[2] = (struct bpf_fuse_arg) {
+			.size = size,
+			.max_size = XATTR_SIZE_MAX,
+			.flags = BPF_FUSE_VARIABLE_SIZE | BPF_FUSE_MUST_ALLOCATE,
+			.value = (void *) value,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_setxattr_initialize_out(struct bpf_fuse_args *fa,
+				 struct fuse_setxattr_in *fsxi,
+				 struct dentry *dentry, const char *name,
+				 const void *value, size_t size, int flags)
+{
+	return 0;
+}
+
+int fuse_setxattr_backing(struct bpf_fuse_args *fa, int *out, struct dentry *dentry,
+			  const char *name, const void *value, size_t size,
+			  int flags)
+{
+	*out = vfs_setxattr(&init_user_ns,
+			    get_fuse_dentry(dentry)->backing_path.dentry, name,
+			    (void *) value, size, flags);
+	return 0;
+}
+
+int fuse_setxattr_finalize(struct bpf_fuse_args *fa, int *out, struct dentry *dentry,
+			   const char *name, const void *value, size_t size,
+			   int flags)
+{
+	return 0;
+}
+
+int fuse_removexattr_initialize_in(struct bpf_fuse_args *fa,
+				   struct fuse_dummy_io *unused,
+				   struct dentry *dentry, const char *name)
+{
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_fuse_inode(dentry->d_inode)->nodeid,
+		.opcode = FUSE_REMOVEXATTR,
+		.in_numargs = 1,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = strlen(name) + 1,
+			.max_size = XATTR_NAME_MAX + 1,
+			.flags = BPF_FUSE_VARIABLE_SIZE | BPF_FUSE_MUST_ALLOCATE,
+			.value =  (void *) name,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_removexattr_initialize_out(struct bpf_fuse_args *fa,
+				    struct fuse_dummy_io *unused,
+				    struct dentry *dentry, const char *name)
+{
+	return 0;
+}
+
+int fuse_removexattr_backing(struct bpf_fuse_args *fa, int *out,
+			     struct dentry *dentry, const char *name)
+{
+	struct path *backing_path = &get_fuse_dentry(dentry)->backing_path;
+
+	/* TODO account for changes of the name by prefilter */
+	*out = vfs_removexattr(&init_user_ns, backing_path->dentry, name);
+	return 0;
+}
+
+int fuse_removexattr_finalize(struct bpf_fuse_args *fa, int *out,
+			      struct dentry *dentry, const char *name)
+{
+	return 0;
+}
+
 static inline void fuse_bpf_aio_put(struct fuse_bpf_aio_req *aio_req)
 {
 	if (refcount_dec_and_test(&aio_req->ref))
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 370fe944387e..b313a45c7774 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1578,6 +1578,61 @@ int fuse_dir_fsync_initialize_in(struct bpf_fuse_args *fa, struct fuse_fsync_in
 int fuse_dir_fsync_initialize_out(struct bpf_fuse_args *fa, struct fuse_fsync_in *ffi,
 				  struct file *file, loff_t start, loff_t end, int datasync);
 
+struct fuse_getxattr_io {
+	struct fuse_getxattr_in fgi;
+	struct fuse_getxattr_out fgo;
+};
+
+int fuse_getxattr_initialize_in(struct bpf_fuse_args *fa, struct fuse_getxattr_io *fgio,
+				struct dentry *dentry, const char *name, void *value,
+				size_t size);
+int fuse_getxattr_initialize_out(struct bpf_fuse_args *fa, struct fuse_getxattr_io *fgio,
+				 struct dentry *dentry, const char *name, void *value,
+				 size_t size);
+int fuse_getxattr_backing(struct bpf_fuse_args *fa, int *out,
+			  struct dentry *dentry, const char *name, void *value,
+			  size_t size);
+int fuse_getxattr_finalize(struct bpf_fuse_args *fa, int *out,
+			   struct dentry *dentry, const char *name, void *value,
+			   size_t size);
+
+int fuse_listxattr_initialize_in(struct bpf_fuse_args *fa,
+				 struct fuse_getxattr_io *fgio,
+				 struct dentry *dentry, char *list, size_t size);
+int fuse_listxattr_initialize_out(struct bpf_fuse_args *fa,
+				  struct fuse_getxattr_io *fgio,
+				  struct dentry *dentry, char *list, size_t size);
+int fuse_listxattr_backing(struct bpf_fuse_args *fa, ssize_t *out, struct dentry *dentry,
+			   char *list, size_t size);
+int fuse_listxattr_finalize(struct bpf_fuse_args *fa, ssize_t *out, struct dentry *dentry,
+			    char *list, size_t size);
+
+int fuse_setxattr_initialize_in(struct bpf_fuse_args *fa,
+				struct fuse_setxattr_in *fsxi,
+				struct dentry *dentry, const char *name,
+				const void *value, size_t size, int flags);
+int fuse_setxattr_initialize_out(struct bpf_fuse_args *fa,
+				 struct fuse_setxattr_in *fsxi,
+				 struct dentry *dentry, const char *name,
+				 const void *value, size_t size, int flags);
+int fuse_setxattr_backing(struct bpf_fuse_args *fa, int *out, struct dentry *dentry,
+			  const char *name, const void *value, size_t size,
+			  int flags);
+int fuse_setxattr_finalize(struct bpf_fuse_args *fa, int *out, struct dentry *dentry,
+			   const char *name, const void *value, size_t size,
+			   int flags);
+
+int fuse_removexattr_initialize_in(struct bpf_fuse_args *fa,
+				   struct fuse_dummy_io *unused,
+				   struct dentry *dentry, const char *name);
+int fuse_removexattr_initialize_out(struct bpf_fuse_args *fa,
+				    struct fuse_dummy_io *unused,
+				    struct dentry *dentry, const char *name);
+int fuse_removexattr_backing(struct bpf_fuse_args *fa, int *out,
+			     struct dentry *dentry, const char *name);
+int fuse_removexattr_finalize(struct bpf_fuse_args *fa, int *out,
+			      struct dentry *dentry, const char *name);
+
 struct fuse_read_iter_out {
 	uint64_t ret;
 };
diff --git a/fs/fuse/xattr.c b/fs/fuse/xattr.c
index 0d3e7177fce0..96728bd907ce 100644
--- a/fs/fuse/xattr.c
+++ b/fs/fuse/xattr.c
@@ -115,6 +115,14 @@ ssize_t fuse_listxattr(struct dentry *entry, char *list, size_t size)
 	struct fuse_getxattr_out outarg;
 	ssize_t ret;
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(inode, struct fuse_getxattr_io, ret,
+			       fuse_listxattr_initialize_in, fuse_listxattr_initialize_out,
+			       fuse_listxattr_backing, fuse_listxattr_finalize,
+			       entry, list, size))
+		return ret;
+#endif
+
 	if (fuse_is_bad(inode))
 		return -EIO;
 
@@ -182,6 +190,16 @@ static int fuse_xattr_get(const struct xattr_handler *handler,
 			 struct dentry *dentry, struct inode *inode,
 			 const char *name, void *value, size_t size)
 {
+#ifdef CONFIG_FUSE_BPF
+	int err;
+
+	if (fuse_bpf_backing(inode, struct fuse_getxattr_io, err,
+			       fuse_getxattr_initialize_in, fuse_getxattr_initialize_out,
+			       fuse_getxattr_backing, fuse_getxattr_finalize,
+			       dentry, name, value, size))
+		return err;
+#endif
+
 	if (fuse_is_bad(inode))
 		return -EIO;
 
@@ -194,6 +212,24 @@ static int fuse_xattr_set(const struct xattr_handler *handler,
 			  const char *name, const void *value, size_t size,
 			  int flags)
 {
+#ifdef CONFIG_FUSE_BPF
+	int err;
+	bool handled;
+
+	if (value)
+		handled = fuse_bpf_backing(inode, struct fuse_setxattr_in, err,
+			       fuse_setxattr_initialize_in, fuse_setxattr_initialize_out,
+			       fuse_setxattr_backing, fuse_setxattr_finalize,
+			       dentry, name, value, size, flags);
+	else
+		handled = fuse_bpf_backing(inode, struct fuse_dummy_io, err,
+			       fuse_removexattr_initialize_in, fuse_removexattr_initialize_out,
+			       fuse_removexattr_backing, fuse_removexattr_finalize,
+			       dentry, name);
+	if (handled)
+		return err;
+#endif
+
 	if (fuse_is_bad(inode))
 		return -EIO;
 
-- 
2.37.3.998.g577e59143f-goog

[PATCH 22/26] fuse-bpf: Add symlink/link support

[Daniel Rosenberg]

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/backing.c | 251 ++++++++++++++++++++++++++++++++++++++++++++++
 fs/fuse/dir.c     |  31 ++++++
 fs/fuse/fuse_i.h  |  33 ++++++
 3 files changed, 315 insertions(+)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index d8c86234f253..485b6f1e8503 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -1951,6 +1951,97 @@ int fuse_unlink_finalize(struct bpf_fuse_args *fa, int *out,
 	return 0;
 }
 
+int fuse_link_initialize_in(struct bpf_fuse_args *fa, struct fuse_link_in *fli,
+			    struct dentry *entry, struct inode *dir,
+			    struct dentry *newent)
+{
+	struct inode *src_inode = entry->d_inode;
+
+	*fli = (struct fuse_link_in) {
+		.oldnodeid = get_node_id(src_inode),
+	};
+
+	fa->opcode = FUSE_LINK;
+	fa->in_numargs = 2;
+	fa->in_args[0].size = sizeof(*fli);
+	fa->in_args[0].value = fli;
+	fa->in_args[1].size = newent->d_name.len + 1;
+	fa->in_args[1].max_size = NAME_MAX + 1;
+	fa->in_args[1].value = (void *) newent->d_name.name;
+	fa->in_args[1].flags = BPF_FUSE_VARIABLE_SIZE | BPF_FUSE_MUST_ALLOCATE;
+
+	return 0;
+}
+
+int fuse_link_initialize_out(struct bpf_fuse_args *fa, struct fuse_link_in *fli,
+			     struct dentry *entry, struct inode *dir,
+			     struct dentry *newent)
+{
+	return 0;
+}
+
+int fuse_link_backing(struct bpf_fuse_args *fa, int *out, struct dentry *entry,
+		      struct inode *dir, struct dentry *newent)
+{
+	struct path backing_old_path;
+	struct path backing_new_path;
+	struct dentry *backing_dir_dentry;
+	struct inode *fuse_new_inode = NULL;
+	struct fuse_inode *fuse_dir_inode = get_fuse_inode(dir);
+	struct inode *backing_dir_inode = fuse_dir_inode->backing_inode;
+
+	*out = 0;
+	get_fuse_backing_path(entry, &backing_old_path);
+	if (!backing_old_path.dentry)
+		return -EBADF;
+
+	get_fuse_backing_path(newent, &backing_new_path);
+	if (!backing_new_path.dentry) {
+		*out = -EBADF;
+		goto err_dst_path;
+	}
+
+	backing_dir_dentry = dget_parent(backing_new_path.dentry);
+	backing_dir_inode = d_inode(backing_dir_dentry);
+
+	inode_lock_nested(backing_dir_inode, I_MUTEX_PARENT);
+	*out = vfs_link(backing_old_path.dentry, &init_user_ns,
+		       backing_dir_inode, backing_new_path.dentry, NULL);
+	inode_unlock(backing_dir_inode);
+	if (*out)
+		goto out;
+
+	if (d_really_is_negative(backing_new_path.dentry) ||
+	    unlikely(d_unhashed(backing_new_path.dentry))) {
+		*out = -EINVAL;
+		/**
+		 * TODO: overlayfs responds to this situation with a
+		 * lookupOneLen. Should we do that too?
+		 */
+		goto out;
+	}
+
+	fuse_new_inode = fuse_iget_backing(dir->i_sb, fuse_dir_inode->nodeid, backing_dir_inode);
+	if (IS_ERR(fuse_new_inode)) {
+		*out = PTR_ERR(fuse_new_inode);
+		goto out;
+	}
+	d_instantiate(newent, fuse_new_inode);
+
+out:
+	dput(backing_dir_dentry);
+	path_put(&backing_new_path);
+err_dst_path:
+	path_put(&backing_old_path);
+	return *out;
+}
+
+int fuse_link_finalize(struct bpf_fuse_args *fa, int *out, struct dentry *entry,
+		       struct inode *dir, struct dentry *newent)
+{
+	return 0;
+}
+
 int fuse_getattr_initialize_in(struct bpf_fuse_args *fa, struct fuse_getattr_io *fgio,
 			       const struct dentry *entry, struct kstat *stat,
 			       u32 request_mask, unsigned int flags)
@@ -2215,6 +2306,166 @@ int fuse_statfs_finalize(struct bpf_fuse_args *fa, int *out,
 	return 0;
 }
 
+int fuse_get_link_initialize_in(struct bpf_fuse_args *fa, struct fuse_dummy_io *unused,
+				struct inode *inode, struct dentry *dentry,
+				struct delayed_call *callback)
+{
+	/*
+	 * TODO
+	 * If we want to handle changing these things, we'll need to copy
+	 * the lower fs's data into our own buffer, and provide our own callback
+	 * to free that buffer.
+	 *
+	 * Pre could change the name we're looking at
+	 * postfilter can change the name we return
+	 *
+	 * We ought to only make that buffer if it's been requested, so leaving
+	 * this unimplemented for the moment
+	 */
+	*fa = (struct bpf_fuse_args) {
+		.opcode = FUSE_READLINK,
+		.nodeid = get_node_id(inode),
+		.in_numargs = 1,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = dentry->d_name.len + 1,
+			.max_size = NAME_MAX + 1,
+			.flags = BPF_FUSE_VARIABLE_SIZE | BPF_FUSE_MUST_ALLOCATE,
+			.value =  (void *) dentry->d_name.name,
+		},
+		/*
+		 * .out_argvar = 1,
+		 * .out_numargs = 1,
+		 * .out_args[0].size = ,
+		 * .out_args[0].value = ,
+		 */
+	};
+
+	return 0;
+}
+
+int fuse_get_link_initialize_out(struct bpf_fuse_args *fa, struct fuse_dummy_io *unused,
+				 struct inode *inode, struct dentry *dentry,
+				 struct delayed_call *callback)
+{
+	/*
+	 * .out_argvar = 1,
+	 * .out_numargs = 1,
+	 * .out_args[0].size = ,
+	 * .out_args[0].value = ,
+	 */
+
+	return 0;
+}
+
+int fuse_get_link_backing(struct bpf_fuse_args *fa, const char **out,
+			  struct inode *inode, struct dentry *dentry,
+			  struct delayed_call *callback)
+{
+	struct path backing_path;
+
+	if (!dentry) {
+		*out = ERR_PTR(-ECHILD);
+		return PTR_ERR(*out);
+	}
+
+	get_fuse_backing_path(dentry, &backing_path);
+	if (!backing_path.dentry) {
+		*out = ERR_PTR(-ECHILD);
+		return PTR_ERR(*out);
+	}
+
+	/*
+	 * TODO: If we want to do our own thing, copy the data and then call the
+	 * callback
+	 */
+	*out = vfs_get_link(backing_path.dentry, callback);
+
+	path_put(&backing_path);
+	return 0;
+}
+
+int fuse_get_link_finalize(struct bpf_fuse_args *fa, const char **out,
+			     struct inode *inode, struct dentry *dentry,
+			     struct delayed_call *callback)
+{
+	return 0;
+}
+
+int fuse_symlink_initialize_in(struct bpf_fuse_args *fa, struct fuse_dummy_io *unused,
+			       struct inode *dir, struct dentry *entry, const char *link, int len)
+{
+	*fa = (struct bpf_fuse_args) {
+		.nodeid = get_node_id(dir),
+		.opcode = FUSE_SYMLINK,
+		.in_numargs = 2,
+		.in_args[0] = (struct bpf_fuse_arg) {
+			.size = entry->d_name.len + 1,
+			.flags = BPF_FUSE_IMMUTABLE,
+			.value =  (void *) entry->d_name.name,
+		},
+		.in_args[1] = (struct bpf_fuse_arg) {
+			.size = len,
+			.max_size = PATH_MAX,
+			.flags = BPF_FUSE_VARIABLE_SIZE | BPF_FUSE_MUST_ALLOCATE,
+			.value = (void *) link,
+		},
+	};
+
+	return 0;
+}
+
+int fuse_symlink_initialize_out(struct bpf_fuse_args *fa, struct fuse_dummy_io *unused,
+				struct inode *dir, struct dentry *entry, const char *link, int len)
+{
+	return 0;
+}
+
+int fuse_symlink_backing(struct bpf_fuse_args *fa, int *out,
+			 struct inode *dir, struct dentry *entry, const char *link, int len)
+{
+	struct fuse_inode *fuse_inode = get_fuse_inode(dir);
+	struct inode *backing_inode = fuse_inode->backing_inode;
+	struct path backing_path;
+	struct inode *inode = NULL;
+
+	*out = 0;
+	//TODO Actually deal with changing the backing entry in symlink
+	get_fuse_backing_path(entry, &backing_path);
+	if (!backing_path.dentry)
+		return -EBADF;
+
+	inode_lock_nested(backing_inode, I_MUTEX_PARENT);
+	*out = vfs_symlink(&init_user_ns, backing_inode, backing_path.dentry,
+			  link);
+	inode_unlock(backing_inode);
+	if (*out)
+		goto out;
+	if (d_really_is_negative(backing_path.dentry) ||
+	    unlikely(d_unhashed(backing_path.dentry))) {
+		*out = -EINVAL;
+		/**
+		 * TODO: overlayfs responds to this situation with a
+		 * lookupOneLen. Should we do that too?
+		 */
+		goto out;
+	}
+	inode = fuse_iget_backing(dir->i_sb, fuse_inode->nodeid, backing_inode);
+	if (IS_ERR(inode)) {
+		*out = PTR_ERR(inode);
+		goto out;
+	}
+	d_instantiate(entry, inode);
+out:
+	path_put(&backing_path);
+	return *out;
+}
+
+int  fuse_symlink_finalize(struct bpf_fuse_args *fa, int *out,
+			   struct inode *dir, struct dentry *entry, const char *link, int len)
+{
+	return 0;
+}
+
 int fuse_readdir_initialize_in(struct bpf_fuse_args *fa, struct fuse_read_io *frio,
 			    struct file *file, struct dir_context *ctx,
 			    bool *force_again, bool *allow_force, bool is_continued)
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index af1f715a405d..a4fd1cb018be 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -967,6 +967,16 @@ static int fuse_symlink(struct user_namespace *mnt_userns, struct inode *dir,
 	unsigned len = strlen(link) + 1;
 	FUSE_ARGS(args);
 
+#ifdef CONFIG_FUSE_BPF
+	int err;
+
+	if (fuse_bpf_backing(dir, struct fuse_dummy_io, err,
+			fuse_symlink_initialize_in, fuse_symlink_initialize_out,
+			fuse_symlink_backing, fuse_symlink_finalize,
+			dir, entry, link, len))
+		return err;
+#endif
+
 	args.opcode = FUSE_SYMLINK;
 	args.in_numargs = 2;
 	args.in_args[0].size = entry->d_name.len + 1;
@@ -1198,6 +1208,14 @@ static int fuse_link(struct dentry *entry, struct inode *newdir,
 	struct fuse_mount *fm = get_fuse_mount(inode);
 	FUSE_ARGS(args);
 
+#ifdef CONFIG_FUSE_BPF
+	if (fuse_bpf_backing(inode, struct fuse_link_in, err,
+				fuse_link_initialize_in, fuse_link_initialize_out,
+				fuse_link_backing, fuse_link_finalize, entry,
+				newdir, newent))
+		return err;
+#endif
+
 	memset(&inarg, 0, sizeof(inarg));
 	inarg.oldnodeid = get_node_id(inode);
 	args.opcode = FUSE_LINK;
@@ -1609,6 +1627,19 @@ static const char *fuse_get_link(struct dentry *dentry, struct inode *inode,
 	if (fuse_is_bad(inode))
 		goto out_err;
 
+#ifdef CONFIG_FUSE_BPF
+	{
+		const char *out = NULL;
+
+		if (fuse_bpf_backing(inode, struct fuse_dummy_io, out,
+				       fuse_get_link_initialize_in, fuse_get_link_initialize_out,
+				       fuse_get_link_backing,
+				       fuse_get_link_finalize,
+				       inode, dentry, callback))
+			return out;
+	}
+#endif
+
 	if (fc->cache_symlinks)
 		return page_get_link(dentry, inode, callback);
 
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index b313a45c7774..cbfd56d669c7 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1504,6 +1504,17 @@ int fuse_unlink_backing(struct bpf_fuse_args *fa, int *out,
 int fuse_unlink_finalize(struct bpf_fuse_args *fa, int *out,
 			 struct inode *dir, struct dentry *entry);
 
+int fuse_link_initialize_in(struct bpf_fuse_args *fa, struct fuse_link_in *fli,
+			    struct dentry *entry, struct inode *dir,
+			    struct dentry *newent);
+int fuse_link_initialize_out(struct bpf_fuse_args *fa, struct fuse_link_in *fli,
+			     struct dentry *entry, struct inode *dir,
+			     struct dentry *newent);
+int fuse_link_backing(struct bpf_fuse_args *fa, int *out, struct dentry *entry,
+		      struct inode *dir, struct dentry *newent);
+int fuse_link_finalize(struct bpf_fuse_args *fa, int *out, struct dentry *entry,
+		       struct inode *dir, struct dentry *newent);
+
 int fuse_release_initialize_in(struct bpf_fuse_args *fa, struct fuse_release_in *fri,
 			       struct inode *inode, struct file *file);
 int fuse_release_initialize_out(struct bpf_fuse_args *fa, struct fuse_release_in *fri,
@@ -1742,6 +1753,28 @@ int fuse_statfs_backing(struct bpf_fuse_args *fa, int *out,
 int fuse_statfs_finalize(struct bpf_fuse_args *fa, int *out,
 			 struct dentry *dentry, struct kstatfs *buf);
 
+int fuse_get_link_initialize_in(struct bpf_fuse_args *fa, struct fuse_dummy_io *dummy,
+				struct inode *inode, struct dentry *dentry,
+				struct delayed_call *callback);
+int fuse_get_link_initialize_out(struct bpf_fuse_args *fa, struct fuse_dummy_io *dummy,
+				 struct inode *inode, struct dentry *dentry,
+				 struct delayed_call *callback);
+int fuse_get_link_backing(struct bpf_fuse_args *fa, const char **out,
+			  struct inode *inode, struct dentry *dentry,
+			  struct delayed_call *callback);
+int fuse_get_link_finalize(struct bpf_fuse_args *fa, const char **out,
+			   struct inode *inode, struct dentry *dentry,
+			   struct delayed_call *callback);
+
+int fuse_symlink_initialize_in(struct bpf_fuse_args *fa, struct fuse_dummy_io *unused,
+			       struct inode *dir, struct dentry *entry, const char *link, int len);
+int fuse_symlink_initialize_out(struct bpf_fuse_args *fa, struct fuse_dummy_io *unused,
+				struct inode *dir, struct dentry *entry, const char *link, int len);
+int fuse_symlink_backing(struct bpf_fuse_args *fa, int *out,
+			 struct inode *dir, struct dentry *entry, const char *link, int len);
+int fuse_symlink_finalize(struct bpf_fuse_args *fa, int *out,
+			  struct inode *dir, struct dentry *entry, const char *link, int len);
+
 struct fuse_read_io {
 	struct fuse_read_in fri;
 	struct fuse_read_out fro;
-- 
2.37.3.998.g577e59143f-goog

[PATCH 23/26] fuse-bpf: allow mounting with no userspace daemon

[Daniel Rosenberg]

When using fuse-bpf in pure passthrough mode, we don't explicitly need a
userspace daemon. This allows simple testing of the backing operations.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/fuse_i.h |  4 ++++
 fs/fuse/inode.c  | 25 +++++++++++++++++++------
 2 files changed, 23 insertions(+), 6 deletions(-)

diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index cbfd56d669c7..6fb5c7a1ff11 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -571,6 +571,7 @@ struct fuse_fs_context {
 	bool no_control:1;
 	bool no_force_umount:1;
 	bool legacy_opts_show:1;
+	bool no_daemon:1;
 	enum fuse_dax_mode dax_mode;
 	unsigned int max_read;
 	unsigned int blksize;
@@ -847,6 +848,9 @@ struct fuse_conn {
 	/* Does the filesystem support per inode DAX? */
 	unsigned int inode_dax:1;
 
+	/** BPF Only, no Daemon running */
+	unsigned int no_daemon:1;
+
 	/** The number of requests waiting for completion */
 	atomic_t num_waiting;
 
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index d178c3eb445f..bc349102ce3b 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -759,6 +759,7 @@ enum {
 	OPT_BLKSIZE,
 	OPT_ROOT_BPF,
 	OPT_ROOT_DIR,
+	OPT_NO_DAEMON,
 	OPT_ERR
 };
 
@@ -775,6 +776,7 @@ static const struct fs_parameter_spec fuse_fs_parameters[] = {
 	fsparam_string	("subtype",		OPT_SUBTYPE),
 	fsparam_u32	("root_bpf",		OPT_ROOT_BPF),
 	fsparam_u32	("root_dir",		OPT_ROOT_DIR),
+	fsparam_flag	("no_daemon",		OPT_NO_DAEMON),
 	{}
 };
 
@@ -873,6 +875,11 @@ static int fuse_parse_param(struct fs_context *fsc, struct fs_parameter *param)
 			return invalfc(fsc, "Unable to open root directory");
 		break;
 
+	case OPT_NO_DAEMON:
+		ctx->no_daemon = true;
+		ctx->fd_present = true;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -1438,7 +1445,7 @@ void fuse_send_init(struct fuse_mount *fm)
 	ia->args.nocreds = true;
 	ia->args.end = process_init_reply;
 
-	if (fuse_simple_background(fm, &ia->args, GFP_KERNEL) != 0)
+	if (unlikely(fm->fc->no_daemon) || fuse_simple_background(fm, &ia->args, GFP_KERNEL) != 0)
 		process_init_reply(fm, &ia->args, -ENOTCONN);
 }
 EXPORT_SYMBOL_GPL(fuse_send_init);
@@ -1720,6 +1727,7 @@ int fuse_fill_super_common(struct super_block *sb, struct fuse_fs_context *ctx)
 	fc->destroy = ctx->destroy;
 	fc->no_control = ctx->no_control;
 	fc->no_force_umount = ctx->no_force_umount;
+	fc->no_daemon = ctx->no_daemon;
 
 	err = -ENOMEM;
 	root = fuse_get_root_inode(sb, ctx->rootmode, ctx->root_bpf,
@@ -1767,7 +1775,7 @@ static int fuse_fill_super(struct super_block *sb, struct fs_context *fsc)
 	struct fuse_fs_context *ctx = fsc->fs_private;
 	int err;
 
-	if (!ctx->file || !ctx->rootmode_present ||
+	if (!!ctx->file == ctx->no_daemon || !ctx->rootmode_present ||
 	    !ctx->user_id_present || !ctx->group_id_present)
 		return -EINVAL;
 
@@ -1775,10 +1783,12 @@ static int fuse_fill_super(struct super_block *sb, struct fs_context *fsc)
 	 * Require mount to happen from the same user namespace which
 	 * opened /dev/fuse to prevent potential attacks.
 	 */
-	if ((ctx->file->f_op != &fuse_dev_operations) ||
-	    (ctx->file->f_cred->user_ns != sb->s_user_ns))
-		return -EINVAL;
-	ctx->fudptr = &ctx->file->private_data;
+	if (ctx->file) {
+		if ((ctx->file->f_op != &fuse_dev_operations) ||
+		    (ctx->file->f_cred->user_ns != sb->s_user_ns))
+			return -EINVAL;
+		ctx->fudptr = &ctx->file->private_data;
+	}
 
 	err = fuse_fill_super_common(sb, ctx);
 	if (err)
@@ -1828,6 +1838,9 @@ static int fuse_get_tree(struct fs_context *fsc)
 
 	fsc->s_fs_info = fm;
 
+	if (ctx->no_daemon)
+		return get_tree_nodev(fsc, fuse_fill_super);;
+
 	if (ctx->fd_present)
 		ctx->file = fget(ctx->fd);
 
-- 
2.37.3.998.g577e59143f-goog

[PATCH 24/26] fuse-bpf: Call bpf for pre/post filters

[Daniel Rosenberg]

This allows altering input or output parameters to fuse calls that will
be handled directly by the backing filesystems. BPF programs can signal
whether the entire operation should instead go through regular fuse, or
if a postfilter call is needed.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
---
 fs/fuse/fuse_i.h | 72 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 6fb5c7a1ff11..07b50be2c6e4 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -1936,6 +1936,46 @@ static inline void convert_fuse_statfs(struct kstatfs *stbuf, struct fuse_kstatf
 int __init fuse_bpf_init(void);
 void __exit fuse_bpf_cleanup(void);
 
+static inline void fuse_bpf_set_in_ends(struct bpf_fuse_args *fa)
+{
+	int i;
+
+	for (i = 0; i < FUSE_MAX_ARGS_IN; i++)
+		fa->in_args[i].end_offset = (void *)
+			((char *)fa->in_args[i].value
+			+ fa->in_args[i].size);
+}
+
+static inline void fuse_bpf_set_in_immutable(struct bpf_fuse_args *fa)
+{
+	int i;
+
+	for (i = 0; i < FUSE_MAX_ARGS_IN; i++)
+		fa->in_args[i].flags |= BPF_FUSE_IMMUTABLE;
+}
+
+static inline void fuse_bpf_set_out_ends(struct bpf_fuse_args *fa)
+{
+	int i;
+
+	for (i = 0; i < FUSE_MAX_ARGS_OUT; i++)
+		fa->out_args[i].end_offset = (void *)
+			((char *)fa->out_args[i].value
+			+ fa->out_args[i].size);
+}
+
+static inline void fuse_bpf_free_alloced(struct bpf_fuse_args *fa)
+{
+	int i;
+
+	for (i = 0; i < FUSE_MAX_ARGS_IN; i++)
+		if (fa->in_args[i].flags & BPF_FUSE_ALLOCATED)
+			kfree(fa->in_args[i].value);
+	for (i = 0; i < FUSE_MAX_ARGS_OUT; i++)
+		if (fa->out_args[i].flags & BPF_FUSE_ALLOCATED)
+			kfree(fa->out_args[i].value);
+}
+
 /*
  * expression statement to wrap the backing filter logic
  * struct inode *inode: inode with bpf and backing inode
@@ -1958,6 +1998,7 @@ void __exit fuse_bpf_cleanup(void);
 	bool initialized = false;					\
 	bool handled = false;						\
 	ssize_t res;							\
+	int bpf_next;							\
 	io feo = { 0 };							\
 	int error = 0;							\
 									\
@@ -1969,17 +2010,47 @@ void __exit fuse_bpf_cleanup(void);
 		error = initialize_in(&fa, &feo, args);			\
 		if (error)						\
 			break;						\
+		fuse_bpf_set_in_ends(&fa);				\
+									\
+		fa.opcode |= FUSE_PREFILTER;				\
+		bpf_next = fuse_inode->bpf ?				\
+			bpf_prog_run(fuse_inode->bpf, &fa) :		\
+			BPF_FUSE_CONTINUE;				\
+		if (bpf_next < 0) {					\
+			error = bpf_next;				\
+			break;						\
+		}							\
+									\
+		fuse_bpf_set_in_immutable(&fa);				\
 									\
 		error = initialize_out(&fa, &feo, args);		\
 		if (error)						\
 			break;						\
+		fuse_bpf_set_out_ends(&fa);				\
 									\
 		initialized = true;					\
+		if (bpf_next == BPF_FUSE_USER) {			\
+			handled = false;				\
+			break;						\
+		}							\
+									\
+		fa.opcode &= ~FUSE_PREFILTER;				\
 									\
 		error = backing(&fa, &out, args);			\
 		if (error < 0)						\
 			fa.error_in = error;				\
 									\
+		if (bpf_next == BPF_FUSE_CONTINUE)			\
+			break;						\
+									\
+		fa.opcode |= FUSE_POSTFILTER;				\
+		if (bpf_next == BPF_FUSE_POSTFILTER)			\
+			bpf_next = bpf_prog_run(fuse_inode->bpf, &fa);	\
+		if (bpf_next < 0) {					\
+			error = bpf_next;				\
+			break;						\
+		}							\
+									\
 	} while (false);						\
 									\
 	if (initialized && handled) {					\
@@ -1987,6 +2058,7 @@ void __exit fuse_bpf_cleanup(void);
 		if (res)						\
 			error = res;					\
 	}								\
+	fuse_bpf_free_alloced(&fa);					\
 									\
 	out = error ? _Generic((out),					\
 			default :					\
-- 
2.37.3.998.g577e59143f-goog

[PATCH 25/26] fuse-bpf: Add userspace pre/post filters

[Daniel Rosenberg]

This allows fuse-bpf to call out to userspace to handle pre and post
filters. Any of the inputs may be changed by the prefilter, so we must
handle up to 3 outputs. For the postfilter, our inputs include the
output arguments, so we must handle up to 5 inputs.

As long as you don't request both pre-filter and post-filter in
userspace, we will end up doing fewer round trips to userspace.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
---
 fs/fuse/backing.c        | 70 ++++++++++++++++++++++++++++++++++++++++
 fs/fuse/dev.c            |  2 ++
 fs/fuse/fuse_i.h         | 42 ++++++++++++++++++++++--
 include/linux/bpf_fuse.h |  1 +
 4 files changed, 113 insertions(+), 2 deletions(-)

diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
index 485b6f1e8503..7a3b1fdb2c56 100644
--- a/fs/fuse/backing.c
+++ b/fs/fuse/backing.c
@@ -2681,3 +2681,73 @@ void __exit fuse_bpf_cleanup(void)
 {
 	kmem_cache_destroy(fuse_bpf_aio_request_cachep);
 }
+
+static ssize_t fuse_bpf_simple_request(struct fuse_mount *fm, struct bpf_fuse_args *fa,
+				       unsigned short in_numargs, unsigned short out_numargs,
+				       struct bpf_fuse_arg *out_arg_array, bool add_out_to_in)
+{
+	int i;
+	uint32_t max_size;
+	ssize_t res;
+
+	struct fuse_args args = {
+		.nodeid = fa->nodeid,
+		.opcode = fa->opcode,
+		.error_in = fa->error_in,
+		.in_numargs = in_numargs,
+		.out_numargs = out_numargs,
+		.force = !!(fa->flags & FUSE_BPF_FORCE),
+		.out_argvar = !!(fa->flags & FUSE_BPF_OUT_ARGVAR),
+		.is_lookup = !!(fa->flags & FUSE_BPF_IS_LOOKUP),
+	};
+
+	/* Set in args */
+	for (i = 0; i < fa->in_numargs; ++i)
+		args.in_args[i] = (struct fuse_in_arg) {
+			.size = fa->in_args[i].size,
+			.value = fa->in_args[i].value,
+		};
+	if (add_out_to_in) {
+		for (i = 0; i < fa->out_numargs; ++i)
+			args.in_args[fa->in_numargs + i] = (struct fuse_in_arg) {
+				.size = fa->out_args[i].size,
+				.value = fa->out_args[i].value,
+			};
+	}
+
+	/* All out args must be writeable */
+	for (i = 0; i < out_numargs; ++i) {
+		max_size = out_arg_array[i].max_size ?: out_arg_array[i].size;
+		if (!bpf_fuse_get_writeable(&out_arg_array[i], max_size, true))
+			return -ENOMEM;
+	}
+
+	/* Set out args */
+	for (i = 0; i < out_numargs; ++i)
+		args.out_args[i] = (struct fuse_arg) {
+			.size = out_arg_array[i].size,
+			.value = out_arg_array[i].value,
+		};
+
+	res = fuse_simple_request(fm, &args);
+
+	/* update used areas of buffers */
+	for (i = 0; i < out_numargs; ++i)
+		if (out_arg_array[i].flags & BPF_FUSE_VARIABLE_SIZE)
+			out_arg_array[i].size = args.out_args[i].size;
+	fa->ret = args.ret;
+
+	return res;
+}
+
+ssize_t fuse_prefilter_simple_request(struct fuse_mount *fm, struct bpf_fuse_args *fa)
+{
+	return fuse_bpf_simple_request(fm, fa, fa->in_numargs, fa->in_numargs,
+				       fa->in_args, false);
+}
+
+ssize_t fuse_postfilter_simple_request(struct fuse_mount *fm, struct bpf_fuse_args *fa)
+{
+	return fuse_bpf_simple_request(fm, fa, fa->in_numargs + fa->out_numargs, fa->out_numargs,
+				       fa->out_args, true);
+}
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 626dbbf92874..765bc95bd560 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -520,6 +520,8 @@ ssize_t fuse_simple_request(struct fuse_mount *fm, struct fuse_args *args)
 		BUG_ON(args->out_numargs == 0);
 		ret = args->out_args[args->out_numargs - 1].size;
 	}
+	if (args->is_filter)
+		args->ret = req->out.h.error;
 	fuse_put_request(req);
 
 	return ret;
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 07b50be2c6e4..a619c6eac6e5 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -305,6 +305,17 @@ struct fuse_page_desc {
 	unsigned int offset;
 };
 
+/* To deal with bpf pre and post filters in userspace calls, we must support
+ * passing the inputs and outputs as inputs, and we must have enough space in
+ * outputs to handle all of the inputs.
+ */
+#define FUSE_EXTENDED_MAX_ARGS_IN (FUSE_MAX_ARGS_IN + FUSE_MAX_ARGS_OUT)
+#if FUSE_MAX_ARGS_IN > FUSE_MAX_ARGS_OUT
+#define FUSE_EXTENDED_MAX_ARGS_OUT FUSE_MAX_ARGS_IN
+#else
+#define FUSE_EXTENDED_MAX_ARGS_OUT FUSE_MAX_ARGS_OUT
+#endif
+
 struct fuse_args {
 	uint64_t nodeid;
 	uint32_t opcode;
@@ -321,9 +332,11 @@ struct fuse_args {
 	bool page_zeroing:1;
 	bool page_replace:1;
 	bool may_block:1;
+	bool is_filter:1;
 	bool is_lookup:1;
-	struct fuse_in_arg in_args[3];
-	struct fuse_arg out_args[2];
+	uint32_t ret;
+	struct fuse_in_arg in_args[FUSE_EXTENDED_MAX_ARGS_IN];
+	struct fuse_arg out_args[FUSE_EXTENDED_MAX_ARGS_OUT];
 	void (*end)(struct fuse_mount *fm, struct fuse_args *args, int error);
 };
 
@@ -1936,6 +1949,9 @@ static inline void convert_fuse_statfs(struct kstatfs *stbuf, struct fuse_kstatf
 int __init fuse_bpf_init(void);
 void __exit fuse_bpf_cleanup(void);
 
+ssize_t fuse_prefilter_simple_request(struct fuse_mount *fm, struct bpf_fuse_args *args);
+ssize_t fuse_postfilter_simple_request(struct fuse_mount *fm, struct bpf_fuse_args *args);
+
 static inline void fuse_bpf_set_in_ends(struct bpf_fuse_args *fa)
 {
 	int i;
@@ -1994,9 +2010,11 @@ static inline void fuse_bpf_free_alloced(struct bpf_fuse_args *fa)
 			 backing, finalize, args...)			\
 ({									\
 	struct fuse_inode *fuse_inode = get_fuse_inode(inode);		\
+	struct fuse_mount *fm = get_fuse_mount(inode);			\
 	struct bpf_fuse_args fa = { 0 };				\
 	bool initialized = false;					\
 	bool handled = false;						\
+	bool locked;							\
 	ssize_t res;							\
 	int bpf_next;							\
 	io feo = { 0 };							\
@@ -2021,6 +2039,16 @@ static inline void fuse_bpf_free_alloced(struct bpf_fuse_args *fa)
 			break;						\
 		}							\
 									\
+		if (bpf_next == BPF_FUSE_USER_PREFILTER) {		\
+			locked = fuse_lock_inode(inode);		\
+			res = fuse_prefilter_simple_request(fm, &fa);	\
+			fuse_unlock_inode(inode, locked);		\
+			if (res < 0) {					\
+				error = res;				\
+				break;					\
+			}						\
+			bpf_next = fa.ret;				\
+		}							\
 		fuse_bpf_set_in_immutable(&fa);				\
 									\
 		error = initialize_out(&fa, &feo, args);		\
@@ -2051,6 +2079,16 @@ static inline void fuse_bpf_free_alloced(struct bpf_fuse_args *fa)
 			break;						\
 		}							\
 									\
+		if (!(bpf_next == BPF_FUSE_USER_POSTFILTER))		\
+			break;						\
+									\
+		locked = fuse_lock_inode(inode);			\
+		res = fuse_postfilter_simple_request(fm, &fa);		\
+		fuse_unlock_inode(inode, locked);			\
+		if (res < 0) {						\
+			error = res;					\
+			break;						\
+		}							\
 	} while (false);						\
 									\
 	if (initialized && handled) {					\
diff --git a/include/linux/bpf_fuse.h b/include/linux/bpf_fuse.h
index ef5c8fdaffee..2802ca71ddd1 100644
--- a/include/linux/bpf_fuse.h
+++ b/include/linux/bpf_fuse.h
@@ -40,6 +40,7 @@ struct bpf_fuse_args {
 	uint32_t in_numargs;
 	uint32_t out_numargs;
 	uint32_t flags;
+	uint32_t ret;
 	struct bpf_fuse_arg in_args[FUSE_MAX_ARGS_IN];
 	struct bpf_fuse_arg out_args[FUSE_MAX_ARGS_OUT];
 };
-- 
2.37.3.998.g577e59143f-goog

[PATCH 26/26] fuse-bpf: Add selftests

[Daniel Rosenberg]

This test suite covers basic fuse-bpf functionality.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Signed-off-by: Alessio Balsini <balsini@google.com>
---
 tools/include/uapi/linux/bpf.h                |   33 +
 tools/include/uapi/linux/fuse.h               | 1066 ++++++++
 .../selftests/filesystems/fuse/.gitignore     |    2 +
 .../selftests/filesystems/fuse/Makefile       |   41 +
 .../testing/selftests/filesystems/fuse/OWNERS |    2 +
 .../selftests/filesystems/fuse/bpf_loader.c   |  798 ++++++
 .../testing/selftests/filesystems/fuse/fd.txt |   21 +
 .../selftests/filesystems/fuse/fd_bpf.c       |  370 +++
 .../selftests/filesystems/fuse/fuse_daemon.c  |  294 +++
 .../selftests/filesystems/fuse/fuse_test.c    | 2147 +++++++++++++++++
 .../selftests/filesystems/fuse/test_bpf.c     |  800 ++++++
 .../filesystems/fuse/test_framework.h         |  173 ++
 .../selftests/filesystems/fuse/test_fuse.h    |  328 +++
 13 files changed, 6075 insertions(+)
 create mode 100644 tools/include/uapi/linux/fuse.h
 create mode 100644 tools/testing/selftests/filesystems/fuse/.gitignore
 create mode 100644 tools/testing/selftests/filesystems/fuse/Makefile
 create mode 100644 tools/testing/selftests/filesystems/fuse/OWNERS
 create mode 100644 tools/testing/selftests/filesystems/fuse/bpf_loader.c
 create mode 100644 tools/testing/selftests/filesystems/fuse/fd.txt
 create mode 100644 tools/testing/selftests/filesystems/fuse/fd_bpf.c
 create mode 100644 tools/testing/selftests/filesystems/fuse/fuse_daemon.c
 create mode 100644 tools/testing/selftests/filesystems/fuse/fuse_test.c
 create mode 100644 tools/testing/selftests/filesystems/fuse/test_bpf.c
 create mode 100644 tools/testing/selftests/filesystems/fuse/test_framework.h
 create mode 100644 tools/testing/selftests/filesystems/fuse/test_fuse.h

diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 59a217ca2dfd..a0ad91e9b9b0 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -952,6 +952,7 @@ enum bpf_prog_type {
 	BPF_PROG_TYPE_LSM,
 	BPF_PROG_TYPE_SK_LOOKUP,
 	BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */
+	BPF_PROG_TYPE_FUSE,
 };
 
 enum bpf_attach_type {
@@ -5541,6 +5542,8 @@ union bpf_attr {
 	FN(tcp_raw_gen_syncookie_ipv6),	\
 	FN(tcp_raw_check_syncookie_ipv4),	\
 	FN(tcp_raw_check_syncookie_ipv6),	\
+	FN(fuse_get_writeable_in),	\
+	FN(fuse_get_writeable_out),	\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
@@ -6848,4 +6851,34 @@ struct bpf_core_relo {
 	enum bpf_core_relo_kind kind;
 };
 
+struct __bpf_fuse_arg {
+	__u64 value;
+	__u64 end_offset;
+	__u32 size;
+	__u32 max_size;
+};
+
+struct __bpf_fuse_args {
+	__u64 nodeid;
+	__u32 opcode;
+	__u32 error_in;
+	__u32 in_numargs;
+	__u32 out_numargs;
+	__u32 flags;
+	struct __bpf_fuse_arg in_args[3];
+	struct __bpf_fuse_arg out_args[2];
+};
+
+/* Return Codes for Fuse BPF programs */
+#define BPF_FUSE_CONTINUE 		0
+#define BPF_FUSE_USER			1
+#define BPF_FUSE_USER_PREFILTER		2
+#define BPF_FUSE_POSTFILTER		3
+#define BPF_FUSE_USER_POSTFILTER	4
+
+/* Op Code Filter values for BPF Programs */
+#define FUSE_OPCODE_FILTER	0x0ffff
+#define FUSE_PREFILTER		0x10000
+#define FUSE_POSTFILTER		0x20000
+
 #endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/tools/include/uapi/linux/fuse.h b/tools/include/uapi/linux/fuse.h
new file mode 100644
index 000000000000..45286cc6b7ec
--- /dev/null
+++ b/tools/include/uapi/linux/fuse.h
@@ -0,0 +1,1066 @@
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) */
+/*
+    This file defines the kernel interface of FUSE
+    Copyright (C) 2001-2008  Miklos Szeredi <miklos@szeredi.hu>
+
+    This program can be distributed under the terms of the GNU GPL.
+    See the file COPYING.
+
+    This -- and only this -- header file may also be distributed under
+    the terms of the BSD Licence as follows:
+
+    Copyright (C) 2001-2007 Miklos Szeredi. All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+    1. Redistributions of source code must retain the above copyright
+       notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+       notice, this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+    ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+    ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
+    FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+    DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+    OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+    HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+    LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+    OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+    SUCH DAMAGE.
+*/
+
+/*
+ * This file defines the kernel interface of FUSE
+ *
+ * Protocol changelog:
+ *
+ * 7.1:
+ *  - add the following messages:
+ *      FUSE_SETATTR, FUSE_SYMLINK, FUSE_MKNOD, FUSE_MKDIR, FUSE_UNLINK,
+ *      FUSE_RMDIR, FUSE_RENAME, FUSE_LINK, FUSE_OPEN, FUSE_READ, FUSE_WRITE,
+ *      FUSE_RELEASE, FUSE_FSYNC, FUSE_FLUSH, FUSE_SETXATTR, FUSE_GETXATTR,
+ *      FUSE_LISTXATTR, FUSE_REMOVEXATTR, FUSE_OPENDIR, FUSE_READDIR,
+ *      FUSE_RELEASEDIR
+ *  - add padding to messages to accommodate 32-bit servers on 64-bit kernels
+ *
+ * 7.2:
+ *  - add FOPEN_DIRECT_IO and FOPEN_KEEP_CACHE flags
+ *  - add FUSE_FSYNCDIR message
+ *
+ * 7.3:
+ *  - add FUSE_ACCESS message
+ *  - add FUSE_CREATE message
+ *  - add filehandle to fuse_setattr_in
+ *
+ * 7.4:
+ *  - add frsize to fuse_kstatfs
+ *  - clean up request size limit checking
+ *
+ * 7.5:
+ *  - add flags and max_write to fuse_init_out
+ *
+ * 7.6:
+ *  - add max_readahead to fuse_init_in and fuse_init_out
+ *
+ * 7.7:
+ *  - add FUSE_INTERRUPT message
+ *  - add POSIX file lock support
+ *
+ * 7.8:
+ *  - add lock_owner and flags fields to fuse_release_in
+ *  - add FUSE_BMAP message
+ *  - add FUSE_DESTROY message
+ *
+ * 7.9:
+ *  - new fuse_getattr_in input argument of GETATTR
+ *  - add lk_flags in fuse_lk_in
+ *  - add lock_owner field to fuse_setattr_in, fuse_read_in and fuse_write_in
+ *  - add blksize field to fuse_attr
+ *  - add file flags field to fuse_read_in and fuse_write_in
+ *  - Add ATIME_NOW and MTIME_NOW flags to fuse_setattr_in
+ *
+ * 7.10
+ *  - add nonseekable open flag
+ *
+ * 7.11
+ *  - add IOCTL message
+ *  - add unsolicited notification support
+ *  - add POLL message and NOTIFY_POLL notification
+ *
+ * 7.12
+ *  - add umask flag to input argument of create, mknod and mkdir
+ *  - add notification messages for invalidation of inodes and
+ *    directory entries
+ *
+ * 7.13
+ *  - make max number of background requests and congestion threshold
+ *    tunables
+ *
+ * 7.14
+ *  - add splice support to fuse device
+ *
+ * 7.15
+ *  - add store notify
+ *  - add retrieve notify
+ *
+ * 7.16
+ *  - add BATCH_FORGET request
+ *  - FUSE_IOCTL_UNRESTRICTED shall now return with array of 'struct
+ *    fuse_ioctl_iovec' instead of ambiguous 'struct iovec'
+ *  - add FUSE_IOCTL_32BIT flag
+ *
+ * 7.17
+ *  - add FUSE_FLOCK_LOCKS and FUSE_RELEASE_FLOCK_UNLOCK
+ *
+ * 7.18
+ *  - add FUSE_IOCTL_DIR flag
+ *  - add FUSE_NOTIFY_DELETE
+ *
+ * 7.19
+ *  - add FUSE_FALLOCATE
+ *
+ * 7.20
+ *  - add FUSE_AUTO_INVAL_DATA
+ *
+ * 7.21
+ *  - add FUSE_READDIRPLUS
+ *  - send the requested events in POLL request
+ *
+ * 7.22
+ *  - add FUSE_ASYNC_DIO
+ *
+ * 7.23
+ *  - add FUSE_WRITEBACK_CACHE
+ *  - add time_gran to fuse_init_out
+ *  - add reserved space to fuse_init_out
+ *  - add FATTR_CTIME
+ *  - add ctime and ctimensec to fuse_setattr_in
+ *  - add FUSE_RENAME2 request
+ *  - add FUSE_NO_OPEN_SUPPORT flag
+ *
+ *  7.24
+ *  - add FUSE_LSEEK for SEEK_HOLE and SEEK_DATA support
+ *
+ *  7.25
+ *  - add FUSE_PARALLEL_DIROPS
+ *
+ *  7.26
+ *  - add FUSE_HANDLE_KILLPRIV
+ *  - add FUSE_POSIX_ACL
+ *
+ *  7.27
+ *  - add FUSE_ABORT_ERROR
+ *
+ *  7.28
+ *  - add FUSE_COPY_FILE_RANGE
+ *  - add FOPEN_CACHE_DIR
+ *  - add FUSE_MAX_PAGES, add max_pages to init_out
+ *  - add FUSE_CACHE_SYMLINKS
+ *
+ *  7.29
+ *  - add FUSE_NO_OPENDIR_SUPPORT flag
+ *
+ *  7.30
+ *  - add FUSE_EXPLICIT_INVAL_DATA
+ *  - add FUSE_IOCTL_COMPAT_X32
+ *
+ *  7.31
+ *  - add FUSE_WRITE_KILL_PRIV flag
+ *  - add FUSE_SETUPMAPPING and FUSE_REMOVEMAPPING
+ *  - add map_alignment to fuse_init_out, add FUSE_MAP_ALIGNMENT flag
+ *
+ *  7.32
+ *  - add flags to fuse_attr, add FUSE_ATTR_SUBMOUNT, add FUSE_SUBMOUNTS
+ *
+ *  7.33
+ *  - add FUSE_HANDLE_KILLPRIV_V2, FUSE_WRITE_KILL_SUIDGID, FATTR_KILL_SUIDGID
+ *  - add FUSE_OPEN_KILL_SUIDGID
+ *  - extend fuse_setxattr_in, add FUSE_SETXATTR_EXT
+ *  - add FUSE_SETXATTR_ACL_KILL_SGID
+ *
+ *  7.34
+ *  - add FUSE_SYNCFS
+ *
+ *  7.35
+ *  - add FOPEN_NOFLUSH
+ *
+ *  7.36
+ *  - extend fuse_init_in with reserved fields, add FUSE_INIT_EXT init flag
+ *  - add flags2 to fuse_init_in and fuse_init_out
+ *  - add FUSE_SECURITY_CTX init flag
+ *  - add security context to create, mkdir, symlink, and mknod requests
+ *  - add FUSE_HAS_INODE_DAX, FUSE_ATTR_DAX
+ */
+
+#ifndef _LINUX_FUSE_H
+#define _LINUX_FUSE_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+/*
+ * Version negotiation:
+ *
+ * Both the kernel and userspace send the version they support in the
+ * INIT request and reply respectively.
+ *
+ * If the major versions match then both shall use the smallest
+ * of the two minor versions for communication.
+ *
+ * If the kernel supports a larger major version, then userspace shall
+ * reply with the major version it supports, ignore the rest of the
+ * INIT message and expect a new INIT message from the kernel with a
+ * matching major version.
+ *
+ * If the library supports a larger major version, then it shall fall
+ * back to the major protocol version sent by the kernel for
+ * communication and reply with that major version (and an arbitrary
+ * supported minor version).
+ */
+
+/** Version number of this interface */
+#define FUSE_KERNEL_VERSION 7
+
+/** Minor version number of this interface */
+#define FUSE_KERNEL_MINOR_VERSION 36
+
+/** The node ID of the root inode */
+#define FUSE_ROOT_ID 1
+
+/* Make sure all structures are padded to 64bit boundary, so 32bit
+   userspace works under 64bit kernels */
+
+struct fuse_attr {
+	uint64_t	ino;
+	uint64_t	size;
+	uint64_t	blocks;
+	uint64_t	atime;
+	uint64_t	mtime;
+	uint64_t	ctime;
+	uint32_t	atimensec;
+	uint32_t	mtimensec;
+	uint32_t	ctimensec;
+	uint32_t	mode;
+	uint32_t	nlink;
+	uint32_t	uid;
+	uint32_t	gid;
+	uint32_t	rdev;
+	uint32_t	blksize;
+	uint32_t	flags;
+};
+
+struct fuse_kstatfs {
+	uint64_t	blocks;
+	uint64_t	bfree;
+	uint64_t	bavail;
+	uint64_t	files;
+	uint64_t	ffree;
+	uint32_t	bsize;
+	uint32_t	namelen;
+	uint32_t	frsize;
+	uint32_t	padding;
+	uint32_t	spare[6];
+};
+
+struct fuse_file_lock {
+	uint64_t	start;
+	uint64_t	end;
+	uint32_t	type;
+	uint32_t	pid; /* tgid */
+};
+
+/**
+ * Bitmasks for fuse_setattr_in.valid
+ */
+#define FATTR_MODE	(1 << 0)
+#define FATTR_UID	(1 << 1)
+#define FATTR_GID	(1 << 2)
+#define FATTR_SIZE	(1 << 3)
+#define FATTR_ATIME	(1 << 4)
+#define FATTR_MTIME	(1 << 5)
+#define FATTR_FH	(1 << 6)
+#define FATTR_ATIME_NOW	(1 << 7)
+#define FATTR_MTIME_NOW	(1 << 8)
+#define FATTR_LOCKOWNER	(1 << 9)
+#define FATTR_CTIME	(1 << 10)
+#define FATTR_KILL_SUIDGID	(1 << 11)
+
+/**
+ * Flags returned by the OPEN request
+ *
+ * FOPEN_DIRECT_IO: bypass page cache for this open file
+ * FOPEN_KEEP_CACHE: don't invalidate the data cache on open
+ * FOPEN_NONSEEKABLE: the file is not seekable
+ * FOPEN_CACHE_DIR: allow caching this directory
+ * FOPEN_STREAM: the file is stream-like (no file position at all)
+ * FOPEN_NOFLUSH: don't flush data cache on close (unless FUSE_WRITEBACK_CACHE)
+ */
+#define FOPEN_DIRECT_IO		(1 << 0)
+#define FOPEN_KEEP_CACHE	(1 << 1)
+#define FOPEN_NONSEEKABLE	(1 << 2)
+#define FOPEN_CACHE_DIR		(1 << 3)
+#define FOPEN_STREAM		(1 << 4)
+#define FOPEN_NOFLUSH		(1 << 5)
+
+/**
+ * INIT request/reply flags
+ *
+ * FUSE_ASYNC_READ: asynchronous read requests
+ * FUSE_POSIX_LOCKS: remote locking for POSIX file locks
+ * FUSE_FILE_OPS: kernel sends file handle for fstat, etc... (not yet supported)
+ * FUSE_ATOMIC_O_TRUNC: handles the O_TRUNC open flag in the filesystem
+ * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
+ * FUSE_BIG_WRITES: filesystem can handle write size larger than 4kB
+ * FUSE_DONT_MASK: don't apply umask to file mode on create operations
+ * FUSE_SPLICE_WRITE: kernel supports splice write on the device
+ * FUSE_SPLICE_MOVE: kernel supports splice move on the device
+ * FUSE_SPLICE_READ: kernel supports splice read on the device
+ * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks
+ * FUSE_HAS_IOCTL_DIR: kernel supports ioctl on directories
+ * FUSE_AUTO_INVAL_DATA: automatically invalidate cached pages
+ * FUSE_DO_READDIRPLUS: do READDIRPLUS (READDIR+LOOKUP in one)
+ * FUSE_READDIRPLUS_AUTO: adaptive readdirplus
+ * FUSE_ASYNC_DIO: asynchronous direct I/O submission
+ * FUSE_WRITEBACK_CACHE: use writeback cache for buffered writes
+ * FUSE_NO_OPEN_SUPPORT: kernel supports zero-message opens
+ * FUSE_PARALLEL_DIROPS: allow parallel lookups and readdir
+ * FUSE_HANDLE_KILLPRIV: fs handles killing suid/sgid/cap on write/chown/trunc
+ * FUSE_POSIX_ACL: filesystem supports posix acls
+ * FUSE_ABORT_ERROR: reading the device after abort returns ECONNABORTED
+ * FUSE_MAX_PAGES: init_out.max_pages contains the max number of req pages
+ * FUSE_CACHE_SYMLINKS: cache READLINK responses
+ * FUSE_NO_OPENDIR_SUPPORT: kernel supports zero-message opendir
+ * FUSE_EXPLICIT_INVAL_DATA: only invalidate cached pages on explicit request
+ * FUSE_MAP_ALIGNMENT: init_out.map_alignment contains log2(byte alignment) for
+ *		       foffset and moffset fields in struct
+ *		       fuse_setupmapping_out and fuse_removemapping_one.
+ * FUSE_SUBMOUNTS: kernel supports auto-mounting directory submounts
+ * FUSE_HANDLE_KILLPRIV_V2: fs kills suid/sgid/cap on write/chown/trunc.
+ *			Upon write/truncate suid/sgid is only killed if caller
+ *			does not have CAP_FSETID. Additionally upon
+ *			write/truncate sgid is killed only if file has group
+ *			execute permission. (Same as Linux VFS behavior).
+ * FUSE_SETXATTR_EXT:	Server supports extended struct fuse_setxattr_in
+ * FUSE_INIT_EXT: extended fuse_init_in request
+ * FUSE_INIT_RESERVED: reserved, do not use
+ * FUSE_SECURITY_CTX:	add security context to create, mkdir, symlink, and
+ *			mknod
+ * FUSE_HAS_INODE_DAX:  use per inode DAX
+ */
+#define FUSE_ASYNC_READ		(1 << 0)
+#define FUSE_POSIX_LOCKS	(1 << 1)
+#define FUSE_FILE_OPS		(1 << 2)
+#define FUSE_ATOMIC_O_TRUNC	(1 << 3)
+#define FUSE_EXPORT_SUPPORT	(1 << 4)
+#define FUSE_BIG_WRITES		(1 << 5)
+#define FUSE_DONT_MASK		(1 << 6)
+#define FUSE_SPLICE_WRITE	(1 << 7)
+#define FUSE_SPLICE_MOVE	(1 << 8)
+#define FUSE_SPLICE_READ	(1 << 9)
+#define FUSE_FLOCK_LOCKS	(1 << 10)
+#define FUSE_HAS_IOCTL_DIR	(1 << 11)
+#define FUSE_AUTO_INVAL_DATA	(1 << 12)
+#define FUSE_DO_READDIRPLUS	(1 << 13)
+#define FUSE_READDIRPLUS_AUTO	(1 << 14)
+#define FUSE_ASYNC_DIO		(1 << 15)
+#define FUSE_WRITEBACK_CACHE	(1 << 16)
+#define FUSE_NO_OPEN_SUPPORT	(1 << 17)
+#define FUSE_PARALLEL_DIROPS    (1 << 18)
+#define FUSE_HANDLE_KILLPRIV	(1 << 19)
+#define FUSE_POSIX_ACL		(1 << 20)
+#define FUSE_ABORT_ERROR	(1 << 21)
+#define FUSE_MAX_PAGES		(1 << 22)
+#define FUSE_CACHE_SYMLINKS	(1 << 23)
+#define FUSE_NO_OPENDIR_SUPPORT (1 << 24)
+#define FUSE_EXPLICIT_INVAL_DATA (1 << 25)
+#define FUSE_MAP_ALIGNMENT	(1 << 26)
+#define FUSE_SUBMOUNTS		(1 << 27)
+#define FUSE_HANDLE_KILLPRIV_V2	(1 << 28)
+#define FUSE_SETXATTR_EXT	(1 << 29)
+#define FUSE_INIT_EXT		(1 << 30)
+#define FUSE_INIT_RESERVED	(1 << 31)
+/* bits 32..63 get shifted down 32 bits into the flags2 field */
+#define FUSE_SECURITY_CTX	(1ULL << 32)
+#define FUSE_HAS_INODE_DAX	(1ULL << 33)
+
+/*
+ * For FUSE < 7.36 FUSE_PASSTHROUGH has value (1 << 31).
+ * This condition check is not really required, but would prevent having a
+ * broken commit in the tree.
+ */
+#if FUSE_KERNEL_VERSION > 7 ||                                                 \
+	(FUSE_KERNEL_VERSION == 7 && FUSE_KERNEL_MINOR_VERSION >= 36)
+#define FUSE_PASSTHROUGH (1ULL << 63)
+#else
+#define FUSE_PASSTHROUGH (1 << 31)
+#endif
+
+/**
+ * CUSE INIT request/reply flags
+ *
+ * CUSE_UNRESTRICTED_IOCTL:  use unrestricted ioctl
+ */
+#define CUSE_UNRESTRICTED_IOCTL	(1 << 0)
+
+/**
+ * Release flags
+ */
+#define FUSE_RELEASE_FLUSH	(1 << 0)
+#define FUSE_RELEASE_FLOCK_UNLOCK	(1 << 1)
+
+/**
+ * Getattr flags
+ */
+#define FUSE_GETATTR_FH		(1 << 0)
+
+/**
+ * Lock flags
+ */
+#define FUSE_LK_FLOCK		(1 << 0)
+
+/**
+ * WRITE flags
+ *
+ * FUSE_WRITE_CACHE: delayed write from page cache, file handle is guessed
+ * FUSE_WRITE_LOCKOWNER: lock_owner field is valid
+ * FUSE_WRITE_KILL_SUIDGID: kill suid and sgid bits
+ */
+#define FUSE_WRITE_CACHE	(1 << 0)
+#define FUSE_WRITE_LOCKOWNER	(1 << 1)
+#define FUSE_WRITE_KILL_SUIDGID (1 << 2)
+
+/* Obsolete alias; this flag implies killing suid/sgid only. */
+#define FUSE_WRITE_KILL_PRIV	FUSE_WRITE_KILL_SUIDGID
+
+/**
+ * Read flags
+ */
+#define FUSE_READ_LOCKOWNER	(1 << 1)
+
+/**
+ * Ioctl flags
+ *
+ * FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine
+ * FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed
+ * FUSE_IOCTL_RETRY: retry with new iovecs
+ * FUSE_IOCTL_32BIT: 32bit ioctl
+ * FUSE_IOCTL_DIR: is a directory
+ * FUSE_IOCTL_COMPAT_X32: x32 compat ioctl on 64bit machine (64bit time_t)
+ *
+ * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs
+ */
+#define FUSE_IOCTL_COMPAT	(1 << 0)
+#define FUSE_IOCTL_UNRESTRICTED	(1 << 1)
+#define FUSE_IOCTL_RETRY	(1 << 2)
+#define FUSE_IOCTL_32BIT	(1 << 3)
+#define FUSE_IOCTL_DIR		(1 << 4)
+#define FUSE_IOCTL_COMPAT_X32	(1 << 5)
+
+#define FUSE_IOCTL_MAX_IOV	256
+
+/**
+ * Poll flags
+ *
+ * FUSE_POLL_SCHEDULE_NOTIFY: request poll notify
+ */
+#define FUSE_POLL_SCHEDULE_NOTIFY (1 << 0)
+
+/**
+ * Fsync flags
+ *
+ * FUSE_FSYNC_FDATASYNC: Sync data only, not metadata
+ */
+#define FUSE_FSYNC_FDATASYNC	(1 << 0)
+
+/**
+ * fuse_attr flags
+ *
+ * FUSE_ATTR_SUBMOUNT: Object is a submount root
+ * FUSE_ATTR_DAX: Enable DAX for this file in per inode DAX mode
+ */
+#define FUSE_ATTR_SUBMOUNT      (1 << 0)
+#define FUSE_ATTR_DAX		(1 << 1)
+
+/**
+ * Open flags
+ * FUSE_OPEN_KILL_SUIDGID: Kill suid and sgid if executable
+ */
+#define FUSE_OPEN_KILL_SUIDGID	(1 << 0)
+
+/**
+ * setxattr flags
+ * FUSE_SETXATTR_ACL_KILL_SGID: Clear SGID when system.posix_acl_access is set
+ */
+#define FUSE_SETXATTR_ACL_KILL_SGID	(1 << 0)
+
+enum fuse_opcode {
+	FUSE_LOOKUP		= 1,
+	FUSE_FORGET		= 2,  /* no reply */
+	FUSE_GETATTR		= 3,
+	FUSE_SETATTR		= 4,
+	FUSE_READLINK		= 5,
+	FUSE_SYMLINK		= 6,
+	FUSE_MKNOD		= 8,
+	FUSE_MKDIR		= 9,
+	FUSE_UNLINK		= 10,
+	FUSE_RMDIR		= 11,
+	FUSE_RENAME		= 12,
+	FUSE_LINK		= 13,
+	FUSE_OPEN		= 14,
+	FUSE_READ		= 15,
+	FUSE_WRITE		= 16,
+	FUSE_STATFS		= 17,
+	FUSE_RELEASE		= 18,
+	FUSE_FSYNC		= 20,
+	FUSE_SETXATTR		= 21,
+	FUSE_GETXATTR		= 22,
+	FUSE_LISTXATTR		= 23,
+	FUSE_REMOVEXATTR	= 24,
+	FUSE_FLUSH		= 25,
+	FUSE_INIT		= 26,
+	FUSE_OPENDIR		= 27,
+	FUSE_READDIR		= 28,
+	FUSE_RELEASEDIR		= 29,
+	FUSE_FSYNCDIR		= 30,
+	FUSE_GETLK		= 31,
+	FUSE_SETLK		= 32,
+	FUSE_SETLKW		= 33,
+	FUSE_ACCESS		= 34,
+	FUSE_CREATE		= 35,
+	FUSE_INTERRUPT		= 36,
+	FUSE_BMAP		= 37,
+	FUSE_DESTROY		= 38,
+	FUSE_IOCTL		= 39,
+	FUSE_POLL		= 40,
+	FUSE_NOTIFY_REPLY	= 41,
+	FUSE_BATCH_FORGET	= 42,
+	FUSE_FALLOCATE		= 43,
+	FUSE_READDIRPLUS	= 44,
+	FUSE_RENAME2		= 45,
+	FUSE_LSEEK		= 46,
+	FUSE_COPY_FILE_RANGE	= 47,
+	FUSE_SETUPMAPPING	= 48,
+	FUSE_REMOVEMAPPING	= 49,
+	FUSE_SYNCFS		= 50,
+
+	/* CUSE specific operations */
+	CUSE_INIT		= 4096,
+
+	/* Reserved opcodes: helpful to detect structure endian-ness */
+	CUSE_INIT_BSWAP_RESERVED	= 1048576,	/* CUSE_INIT << 8 */
+	FUSE_INIT_BSWAP_RESERVED	= 436207616,	/* FUSE_INIT << 24 */
+};
+
+enum fuse_notify_code {
+	FUSE_NOTIFY_POLL   = 1,
+	FUSE_NOTIFY_INVAL_INODE = 2,
+	FUSE_NOTIFY_INVAL_ENTRY = 3,
+	FUSE_NOTIFY_STORE = 4,
+	FUSE_NOTIFY_RETRIEVE = 5,
+	FUSE_NOTIFY_DELETE = 6,
+	FUSE_NOTIFY_CODE_MAX,
+};
+
+/* The read buffer is required to be at least 8k, but may be much larger */
+#define FUSE_MIN_READ_BUFFER 8192
+
+#define FUSE_COMPAT_ENTRY_OUT_SIZE 120
+
+struct fuse_entry_out {
+	uint64_t	nodeid;		/* Inode ID */
+	uint64_t	generation;	/* Inode generation: nodeid:gen must
+					   be unique for the fs's lifetime */
+	uint64_t	entry_valid;	/* Cache timeout for the name */
+	uint64_t	attr_valid;	/* Cache timeout for the attributes */
+	uint32_t	entry_valid_nsec;
+	uint32_t	attr_valid_nsec;
+	struct fuse_attr attr;
+};
+
+#define FUSE_ACTION_KEEP	0
+#define FUSE_ACTION_REMOVE	1
+#define FUSE_ACTION_REPLACE	2
+
+struct fuse_entry_bpf_out {
+	uint64_t	backing_action;
+	uint64_t	backing_fd;
+	uint64_t	bpf_action;
+	uint64_t	bpf_fd;
+};
+
+struct fuse_forget_in {
+	uint64_t	nlookup;
+};
+
+struct fuse_forget_one {
+	uint64_t	nodeid;
+	uint64_t	nlookup;
+};
+
+struct fuse_batch_forget_in {
+	uint32_t	count;
+	uint32_t	dummy;
+};
+
+struct fuse_getattr_in {
+	uint32_t	getattr_flags;
+	uint32_t	dummy;
+	uint64_t	fh;
+};
+
+#define FUSE_COMPAT_ATTR_OUT_SIZE 96
+
+struct fuse_attr_out {
+	uint64_t	attr_valid;	/* Cache timeout for the attributes */
+	uint32_t	attr_valid_nsec;
+	uint32_t	dummy;
+	struct fuse_attr attr;
+};
+
+#define FUSE_COMPAT_MKNOD_IN_SIZE 8
+
+struct fuse_mknod_in {
+	uint32_t	mode;
+	uint32_t	rdev;
+	uint32_t	umask;
+	uint32_t	padding;
+};
+
+struct fuse_mkdir_in {
+	uint32_t	mode;
+	uint32_t	umask;
+};
+
+struct fuse_rename_in {
+	uint64_t	newdir;
+};
+
+struct fuse_rename2_in {
+	uint64_t	newdir;
+	uint32_t	flags;
+	uint32_t	padding;
+};
+
+struct fuse_link_in {
+	uint64_t	oldnodeid;
+};
+
+struct fuse_setattr_in {
+	uint32_t	valid;
+	uint32_t	padding;
+	uint64_t	fh;
+	uint64_t	size;
+	uint64_t	lock_owner;
+	uint64_t	atime;
+	uint64_t	mtime;
+	uint64_t	ctime;
+	uint32_t	atimensec;
+	uint32_t	mtimensec;
+	uint32_t	ctimensec;
+	uint32_t	mode;
+	uint32_t	unused4;
+	uint32_t	uid;
+	uint32_t	gid;
+	uint32_t	unused5;
+};
+
+struct fuse_open_in {
+	uint32_t	flags;
+	uint32_t	open_flags;	/* FUSE_OPEN_... */
+};
+
+struct fuse_create_in {
+	uint32_t	flags;
+	uint32_t	mode;
+	uint32_t	umask;
+	uint32_t	open_flags;	/* FUSE_OPEN_... */
+};
+
+struct fuse_open_out {
+	uint64_t	fh;
+	uint32_t	open_flags;
+	uint32_t	passthrough_fh;
+};
+
+struct fuse_release_in {
+	uint64_t	fh;
+	uint32_t	flags;
+	uint32_t	release_flags;
+	uint64_t	lock_owner;
+};
+
+struct fuse_flush_in {
+	uint64_t	fh;
+	uint32_t	unused;
+	uint32_t	padding;
+	uint64_t	lock_owner;
+};
+
+struct fuse_read_in {
+	uint64_t	fh;
+	uint64_t	offset;
+	uint32_t	size;
+	uint32_t	read_flags;
+	uint64_t	lock_owner;
+	uint32_t	flags;
+	uint32_t	padding;
+};
+
+struct fuse_read_out {
+	uint64_t	offset;
+	uint32_t	again;
+	uint32_t	padding;
+};
+
+#define FUSE_COMPAT_WRITE_IN_SIZE 24
+
+struct fuse_write_in {
+	uint64_t	fh;
+	uint64_t	offset;
+	uint32_t	size;
+	uint32_t	write_flags;
+	uint64_t	lock_owner;
+	uint32_t	flags;
+	uint32_t	padding;
+};
+
+struct fuse_write_out {
+	uint32_t	size;
+	uint32_t	padding;
+};
+
+#define FUSE_COMPAT_STATFS_SIZE 48
+
+struct fuse_statfs_out {
+	struct fuse_kstatfs st;
+};
+
+struct fuse_fsync_in {
+	uint64_t	fh;
+	uint32_t	fsync_flags;
+	uint32_t	padding;
+};
+
+#define FUSE_COMPAT_SETXATTR_IN_SIZE 8
+
+struct fuse_setxattr_in {
+	uint32_t	size;
+	uint32_t	flags;
+	uint32_t	setxattr_flags;
+	uint32_t	padding;
+};
+
+struct fuse_getxattr_in {
+	uint32_t	size;
+	uint32_t	padding;
+};
+
+struct fuse_getxattr_out {
+	uint32_t	size;
+	uint32_t	padding;
+};
+
+struct fuse_lk_in {
+	uint64_t	fh;
+	uint64_t	owner;
+	struct fuse_file_lock lk;
+	uint32_t	lk_flags;
+	uint32_t	padding;
+};
+
+struct fuse_lk_out {
+	struct fuse_file_lock lk;
+};
+
+struct fuse_access_in {
+	uint32_t	mask;
+	uint32_t	padding;
+};
+
+struct fuse_init_in {
+	uint32_t	major;
+	uint32_t	minor;
+	uint32_t	max_readahead;
+	uint32_t	flags;
+	uint32_t	flags2;
+	uint32_t	unused[11];
+};
+
+#define FUSE_COMPAT_INIT_OUT_SIZE 8
+#define FUSE_COMPAT_22_INIT_OUT_SIZE 24
+
+struct fuse_init_out {
+	uint32_t	major;
+	uint32_t	minor;
+	uint32_t	max_readahead;
+	uint32_t	flags;
+	uint16_t	max_background;
+	uint16_t	congestion_threshold;
+	uint32_t	max_write;
+	uint32_t	time_gran;
+	uint16_t	max_pages;
+	uint16_t	map_alignment;
+	uint32_t	flags2;
+	uint32_t	unused[7];
+};
+
+#define CUSE_INIT_INFO_MAX 4096
+
+struct cuse_init_in {
+	uint32_t	major;
+	uint32_t	minor;
+	uint32_t	unused;
+	uint32_t	flags;
+};
+
+struct cuse_init_out {
+	uint32_t	major;
+	uint32_t	minor;
+	uint32_t	unused;
+	uint32_t	flags;
+	uint32_t	max_read;
+	uint32_t	max_write;
+	uint32_t	dev_major;		/* chardev major */
+	uint32_t	dev_minor;		/* chardev minor */
+	uint32_t	spare[10];
+};
+
+struct fuse_interrupt_in {
+	uint64_t	unique;
+};
+
+struct fuse_bmap_in {
+	uint64_t	block;
+	uint32_t	blocksize;
+	uint32_t	padding;
+};
+
+struct fuse_bmap_out {
+	uint64_t	block;
+};
+
+struct fuse_ioctl_in {
+	uint64_t	fh;
+	uint32_t	flags;
+	uint32_t	cmd;
+	uint64_t	arg;
+	uint32_t	in_size;
+	uint32_t	out_size;
+};
+
+struct fuse_ioctl_iovec {
+	uint64_t	base;
+	uint64_t	len;
+};
+
+struct fuse_ioctl_out {
+	int32_t		result;
+	uint32_t	flags;
+	uint32_t	in_iovs;
+	uint32_t	out_iovs;
+};
+
+struct fuse_poll_in {
+	uint64_t	fh;
+	uint64_t	kh;
+	uint32_t	flags;
+	uint32_t	events;
+};
+
+struct fuse_poll_out {
+	uint32_t	revents;
+	uint32_t	padding;
+};
+
+struct fuse_notify_poll_wakeup_out {
+	uint64_t	kh;
+};
+
+struct fuse_fallocate_in {
+	uint64_t	fh;
+	uint64_t	offset;
+	uint64_t	length;
+	uint32_t	mode;
+	uint32_t	padding;
+};
+
+struct fuse_in_header {
+	uint32_t	len;
+	uint32_t	opcode;
+	uint64_t	unique;
+	uint64_t	nodeid;
+	uint32_t	uid;
+	uint32_t	gid;
+	uint32_t	pid;
+	uint32_t	error_in;
+};
+
+struct fuse_out_header {
+	uint32_t	len;
+	int32_t		error;
+	uint64_t	unique;
+};
+
+struct fuse_dirent {
+	uint64_t	ino;
+	uint64_t	off;
+	uint32_t	namelen;
+	uint32_t	type;
+	char name[];
+};
+
+/* Align variable length records to 64bit boundary */
+#define FUSE_REC_ALIGN(x) \
+	(((x) + sizeof(uint64_t) - 1) & ~(sizeof(uint64_t) - 1))
+
+#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name)
+#define FUSE_DIRENT_ALIGN(x) FUSE_REC_ALIGN(x)
+#define FUSE_DIRENT_SIZE(d) \
+	FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen)
+
+struct fuse_direntplus {
+	struct fuse_entry_out entry_out;
+	struct fuse_dirent dirent;
+};
+
+#define FUSE_NAME_OFFSET_DIRENTPLUS \
+	offsetof(struct fuse_direntplus, dirent.name)
+#define FUSE_DIRENTPLUS_SIZE(d) \
+	FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET_DIRENTPLUS + (d)->dirent.namelen)
+
+struct fuse_notify_inval_inode_out {
+	uint64_t	ino;
+	int64_t		off;
+	int64_t		len;
+};
+
+struct fuse_notify_inval_entry_out {
+	uint64_t	parent;
+	uint32_t	namelen;
+	uint32_t	padding;
+};
+
+struct fuse_notify_delete_out {
+	uint64_t	parent;
+	uint64_t	child;
+	uint32_t	namelen;
+	uint32_t	padding;
+};
+
+struct fuse_notify_store_out {
+	uint64_t	nodeid;
+	uint64_t	offset;
+	uint32_t	size;
+	uint32_t	padding;
+};
+
+struct fuse_notify_retrieve_out {
+	uint64_t	notify_unique;
+	uint64_t	nodeid;
+	uint64_t	offset;
+	uint32_t	size;
+	uint32_t	padding;
+};
+
+/* Matches the size of fuse_write_in */
+struct fuse_notify_retrieve_in {
+	uint64_t	dummy1;
+	uint64_t	offset;
+	uint32_t	size;
+	uint32_t	dummy2;
+	uint64_t	dummy3;
+	uint64_t	dummy4;
+};
+
+/* Device ioctls: */
+#define FUSE_DEV_IOC_MAGIC		229
+#define FUSE_DEV_IOC_CLONE		_IOR(FUSE_DEV_IOC_MAGIC, 0, uint32_t)
+/* 127 is reserved for the V1 interface implementation in Android (deprecated) */
+/* 126 is reserved for the V2 interface implementation in Android */
+#define FUSE_DEV_IOC_PASSTHROUGH_OPEN	_IOW(FUSE_DEV_IOC_MAGIC, 126, uint32_t)
+
+struct fuse_lseek_in {
+	uint64_t	fh;
+	uint64_t	offset;
+	uint32_t	whence;
+	uint32_t	padding;
+};
+
+struct fuse_lseek_out {
+	uint64_t	offset;
+};
+
+struct fuse_copy_file_range_in {
+	uint64_t	fh_in;
+	uint64_t	off_in;
+	uint64_t	nodeid_out;
+	uint64_t	fh_out;
+	uint64_t	off_out;
+	uint64_t	len;
+	uint64_t	flags;
+};
+
+#define FUSE_SETUPMAPPING_FLAG_WRITE (1ull << 0)
+#define FUSE_SETUPMAPPING_FLAG_READ (1ull << 1)
+struct fuse_setupmapping_in {
+	/* An already open handle */
+	uint64_t	fh;
+	/* Offset into the file to start the mapping */
+	uint64_t	foffset;
+	/* Length of mapping required */
+	uint64_t	len;
+	/* Flags, FUSE_SETUPMAPPING_FLAG_* */
+	uint64_t	flags;
+	/* Offset in Memory Window */
+	uint64_t	moffset;
+};
+
+struct fuse_removemapping_in {
+	/* number of fuse_removemapping_one follows */
+	uint32_t        count;
+};
+
+struct fuse_removemapping_one {
+	/* Offset into the dax window start the unmapping */
+	uint64_t        moffset;
+	/* Length of mapping required */
+	uint64_t	len;
+};
+
+#define FUSE_REMOVEMAPPING_MAX_ENTRY   \
+		(PAGE_SIZE / sizeof(struct fuse_removemapping_one))
+
+struct fuse_syncfs_in {
+	uint64_t	padding;
+};
+
+/*
+ * For each security context, send fuse_secctx with size of security context
+ * fuse_secctx will be followed by security context name and this in turn
+ * will be followed by actual context label.
+ * fuse_secctx, name, context
+ */
+struct fuse_secctx {
+	uint32_t	size;
+	uint32_t	padding;
+};
+
+/*
+ * Contains the information about how many fuse_secctx structures are being
+ * sent and what's the total size of all security contexts (including
+ * size of fuse_secctx_header).
+ *
+ */
+struct fuse_secctx_header {
+	uint32_t	size;
+	uint32_t	nr_secctx;
+};
+
+#endif /* _LINUX_FUSE_H */
diff --git a/tools/testing/selftests/filesystems/fuse/.gitignore b/tools/testing/selftests/filesystems/fuse/.gitignore
new file mode 100644
index 000000000000..3ee9a27fe66a
--- /dev/null
+++ b/tools/testing/selftests/filesystems/fuse/.gitignore
@@ -0,0 +1,2 @@
+fuse_test
+*.raw
diff --git a/tools/testing/selftests/filesystems/fuse/Makefile b/tools/testing/selftests/filesystems/fuse/Makefile
new file mode 100644
index 000000000000..98acf81dce45
--- /dev/null
+++ b/tools/testing/selftests/filesystems/fuse/Makefile
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+include ../../../../../scripts/Kbuild.include
+include ../../../../scripts/Makefile.arch
+
+CXX ?= $(CROSS_COMPILE)g++
+
+CURDIR := $(abspath .)
+TOOLSDIR := $(abspath ../../../..)
+TOOLINCDIR := $(TOOLSDIR)/include
+APIDIR := $(TOOLINCDIR)/uapi
+SELFTESTS:=$(TOOLSDIR)/testing/selftests/
+
+CFLAGS += -D_FILE_OFFSET_BITS=64 -Wall -Werror -I$(CURDIR) \
+	  -I$(TOOLINCDIR) -I$(APIDIR) -I$(SELFTESTS)
+LDLIBS := -lpthread -lelf
+TEST_GEN_PROGS := fuse_test fuse_daemon
+TEST_GEN_FILES := \
+	test_bpf.bpf \
+	fd_bpf.bpf \
+	fd.sh \
+
+EXTRA_CLEAN := *.bpf
+BPF_FLAGS = -Wall -Werror -O2 -g -emit-llvm
+
+include ../../lib.mk
+
+# Put after include ../../lib.mk since that changes $(TEST_GEN_PROGS)
+# Otherwise you get multiple targets, this becomes the default, and it's a mess
+EXTRA_SOURCES := bpf_loader.c
+$(TEST_GEN_PROGS) : $(EXTRA_SOURCES)
+
+$(OUTPUT)/%.ir: %.c
+	clang $(BPF_FLAGS) -c $(CFLAGS) $< -o $@
+
+$(OUTPUT)/%.bpf: $(OUTPUT)/%.ir
+	llc -march=bpf -filetype=obj -o $@ $<
+
+$(OUTPUT)/fd.sh: fd.txt
+	cp $< $@
+	chmod 755 $@
+
diff --git a/tools/testing/selftests/filesystems/fuse/OWNERS b/tools/testing/selftests/filesystems/fuse/OWNERS
new file mode 100644
index 000000000000..5eb371e1a5a3
--- /dev/null
+++ b/tools/testing/selftests/filesystems/fuse/OWNERS
@@ -0,0 +1,2 @@
+# include OWNERS from the authoritative android-mainline branch
+include kernel/common:android-mainline:/tools/testing/selftests/filesystems/incfs/OWNERS
diff --git a/tools/testing/selftests/filesystems/fuse/bpf_loader.c b/tools/testing/selftests/filesystems/fuse/bpf_loader.c
new file mode 100644
index 000000000000..2020eac7e5ba
--- /dev/null
+++ b/tools/testing/selftests/filesystems/fuse/bpf_loader.c
@@ -0,0 +1,798 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Google LLC
+ */
+
+#include "test_fuse.h"
+
+#include <dirent.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <gelf.h>
+#include <libelf.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/mount.h>
+#include <sys/stat.h>
+#include <sys/statfs.h>
+#include <sys/xattr.h>
+
+#include <linux/unistd.h>
+
+#include <uapi/linux/fuse.h>
+#include <uapi/linux/bpf.h>
+
+struct _test_options test_options;
+
+struct s s(const char *s1)
+{
+	struct s s = {0};
+
+	if (!s1)
+		return s;
+
+	s.s = malloc(strlen(s1) + 1);
+	if (!s.s)
+		return s;
+
+	strcpy(s.s, s1);
+	return s;
+}
+
+struct s sn(const char *s1, const char *s2)
+{
+	struct s s = {0};
+
+	if (!s1)
+		return s;
+
+	s.s = malloc(s2 - s1 + 1);
+	if (!s.s)
+		return s;
+
+	strncpy(s.s, s1, s2 - s1);
+	s.s[s2 - s1] = 0;
+	return s;
+}
+
+int s_cmp(struct s s1, struct s s2)
+{
+	int result = -1;
+
+	if (!s1.s || !s2.s)
+		goto out;
+	result = strcmp(s1.s, s2.s);
+out:
+	free(s1.s);
+	free(s2.s);
+	return result;
+}
+
+struct s s_cat(struct s s1, struct s s2)
+{
+	struct s s = {0};
+
+	if (!s1.s || !s2.s)
+		goto out;
+
+	s.s = malloc(strlen(s1.s) + strlen(s2.s) + 1);
+	if (!s.s)
+		goto out;
+
+	strcpy(s.s, s1.s);
+	strcat(s.s, s2.s);
+out:
+	free(s1.s);
+	free(s2.s);
+	return s;
+}
+
+struct s s_splitleft(struct s s1, char c)
+{
+	struct s s = {0};
+	char *split;
+
+	if (!s1.s)
+		return s;
+
+	split = strchr(s1.s, c);
+	if (split)
+		s = sn(s1.s, split);
+
+	free(s1.s);
+	return s;
+}
+
+struct s s_splitright(struct s s1, char c)
+{
+	struct s s2 = {0};
+	char *split;
+
+	if (!s1.s)
+		return s2;
+
+	split = strchr(s1.s, c);
+	if (split)
+		s2 = s(split + 1);
+
+	free(s1.s);
+	return s2;
+}
+
+struct s s_word(struct s s1, char c, size_t n)
+{
+	while (n--)
+		s1 = s_splitright(s1, c);
+	return s_splitleft(s1, c);
+}
+
+struct s s_path(struct s s1, struct s s2)
+{
+	return s_cat(s_cat(s1, s("/")), s2);
+}
+
+struct s s_pathn(size_t n, struct s s1, ...)
+{
+	va_list argp;
+
+	va_start(argp, s1);
+	while (--n)
+		s1 = s_path(s1, va_arg(argp, struct s));
+	va_end(argp);
+	return s1;
+}
+
+int s_link(struct s src_pathname, struct s dst_pathname)
+{
+	int res;
+
+	if (src_pathname.s && dst_pathname.s) {
+		res = link(src_pathname.s, dst_pathname.s);
+	} else {
+		res = -1;
+		errno = ENOMEM;
+	}
+
+	free(src_pathname.s);
+	free(dst_pathname.s);
+	return res;
+}
+
+int s_symlink(struct s src_pathname, struct s dst_pathname)
+{
+	int res;
+
+	if (src_pathname.s && dst_pathname.s) {
+		res = symlink(src_pathname.s, dst_pathname.s);
+	} else {
+		res = -1;
+		errno = ENOMEM;
+	}
+
+	free(src_pathname.s);
+	free(dst_pathname.s);
+	return res;
+}
+
+
+int s_mkdir(struct s pathname, mode_t mode)
+{
+	int res;
+
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	res = mkdir(pathname.s, mode);
+	free(pathname.s);
+	return res;
+}
+
+int s_rmdir(struct s pathname)
+{
+	int res;
+
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	res = rmdir(pathname.s);
+	free(pathname.s);
+	return res;
+}
+
+int s_unlink(struct s pathname)
+{
+	int res;
+
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	res = unlink(pathname.s);
+	free(pathname.s);
+	return res;
+}
+
+int s_open(struct s pathname, int flags, ...)
+{
+	va_list ap;
+	int res;
+
+	va_start(ap, flags);
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	if (flags & (O_CREAT | O_TMPFILE))
+		res = open(pathname.s, flags, va_arg(ap, mode_t));
+	else
+		res = open(pathname.s, flags);
+
+	free(pathname.s);
+	va_end(ap);
+	return res;
+}
+
+int s_openat(int dirfd, struct s pathname, int flags, ...)
+{
+	va_list ap;
+	int res;
+
+	va_start(ap, flags);
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	if (flags & (O_CREAT | O_TMPFILE))
+		res = openat(dirfd, pathname.s, flags, va_arg(ap, mode_t));
+	else
+		res = openat(dirfd, pathname.s, flags);
+
+	free(pathname.s);
+	va_end(ap);
+	return res;
+}
+
+int s_creat(struct s pathname, mode_t mode)
+{
+	int res;
+
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	res = open(pathname.s, O_WRONLY | O_CREAT | O_TRUNC | O_CLOEXEC, mode);
+	free(pathname.s);
+	return res;
+}
+
+int s_mkfifo(struct s pathname, mode_t mode)
+{
+	int res;
+
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	res = mknod(pathname.s, S_IFIFO | mode, 0);
+	free(pathname.s);
+	return res;
+}
+
+int s_stat(struct s pathname, struct stat *st)
+{
+	int res;
+
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	res = stat(pathname.s, st);
+	free(pathname.s);
+	return res;
+}
+
+int s_statfs(struct s pathname, struct statfs *st)
+{
+	int res;
+
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	res = statfs(pathname.s, st);
+	free(pathname.s);
+	return res;
+}
+
+DIR *s_opendir(struct s pathname)
+{
+	DIR *res;
+
+	res = opendir(pathname.s);
+	free(pathname.s);
+	return res;
+}
+
+int s_getxattr(struct s pathname, const char name[], void *value, size_t size,
+	       ssize_t *ret_size)
+{
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	*ret_size = getxattr(pathname.s, name, value, size);
+	free(pathname.s);
+	return *ret_size >= 0 ? 0 : -1;
+}
+
+int s_listxattr(struct s pathname, void *list, size_t size, ssize_t *ret_size)
+{
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	*ret_size = listxattr(pathname.s, list, size);
+	free(pathname.s);
+	return *ret_size >= 0 ? 0 : -1;
+}
+
+int s_setxattr(struct s pathname, const char name[], const void *value, size_t size, int flags)
+{
+	int res;
+
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	res = setxattr(pathname.s, name, value, size, flags);
+	free(pathname.s);
+	return res;
+}
+
+int s_removexattr(struct s pathname, const char name[])
+{
+	int res;
+
+	if (!pathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	res = removexattr(pathname.s, name);
+	free(pathname.s);
+	return res;
+}
+
+int s_rename(struct s oldpathname, struct s newpathname)
+{
+	int res;
+
+	if (!oldpathname.s || !newpathname.s) {
+		errno = ENOMEM;
+		return -1;
+	}
+
+	res = rename(oldpathname.s, newpathname.s);
+	free(oldpathname.s);
+	free(newpathname.s);
+	return res;
+}
+
+int s_fuse_attr(struct s pathname, struct fuse_attr *fuse_attr_out)
+{
+
+	struct stat st;
+	int result = TEST_FAILURE;
+
+	TESTSYSCALL(s_stat(pathname, &st));
+
+	fuse_attr_out->ino = st.st_ino;
+	fuse_attr_out->mode = st.st_mode;
+	fuse_attr_out->nlink = st.st_nlink;
+	fuse_attr_out->uid = st.st_uid;
+	fuse_attr_out->gid = st.st_gid;
+	fuse_attr_out->rdev = st.st_rdev;
+	fuse_attr_out->size = st.st_size;
+	fuse_attr_out->blksize = st.st_blksize;
+	fuse_attr_out->blocks = st.st_blocks;
+	fuse_attr_out->atime = st.st_atime;
+	fuse_attr_out->mtime = st.st_mtime;
+	fuse_attr_out->ctime = st.st_ctime;
+	fuse_attr_out->atimensec = UINT32_MAX;
+	fuse_attr_out->mtimensec = UINT32_MAX;
+	fuse_attr_out->ctimensec = UINT32_MAX;
+
+	result = TEST_SUCCESS;
+out:
+	return result;
+}
+
+struct s tracing_folder(void)
+{
+	struct s trace = {0};
+	FILE *mounts = NULL;
+	char *line = NULL;
+	size_t size = 0;
+
+	TEST(mounts = fopen("/proc/mounts", "re"), mounts);
+	while (getline(&line, &size, mounts) != -1) {
+		if (!s_cmp(s_word(sn(line, line + size), ' ', 2),
+			   s("tracefs"))) {
+			trace = s_word(sn(line, line + size), ' ', 1);
+			break;
+		}
+
+		if (!s_cmp(s_word(sn(line, line + size), ' ', 2), s("debugfs")))
+			trace = s_path(s_word(sn(line, line + size), ' ', 1),
+				       s("tracing"));
+	}
+
+out:
+	free(line);
+	fclose(mounts);
+	return trace;
+}
+
+int tracing_on(void)
+{
+	int result = TEST_FAILURE;
+	int tracing_on = -1;
+
+	TEST(tracing_on = s_open(s_path(tracing_folder(), s("tracing_on")),
+				 O_WRONLY | O_CLOEXEC),
+	     tracing_on != -1);
+	TESTEQUAL(write(tracing_on, "1", 1), 1);
+	result = TEST_SUCCESS;
+out:
+	close(tracing_on);
+	return result;
+}
+
+char *concat_file_name(const char *dir, const char *file)
+{
+	char full_name[FILENAME_MAX] = "";
+
+	if (snprintf(full_name, ARRAY_SIZE(full_name), "%s/%s", dir, file) < 0)
+		return NULL;
+	return strdup(full_name);
+}
+
+char *setup_mount_dir(const char *name)
+{
+	struct stat st;
+	char *current_dir = getcwd(NULL, 0);
+	char *mount_dir = concat_file_name(current_dir, name);
+
+	free(current_dir);
+	if (stat(mount_dir, &st) == 0) {
+		if (S_ISDIR(st.st_mode))
+			return mount_dir;
+
+		ksft_print_msg("%s is a file, not a dir.\n", mount_dir);
+		return NULL;
+	}
+
+	if (mkdir(mount_dir, 0777)) {
+		ksft_print_msg("Can't create mount dir.");
+		return NULL;
+	}
+
+	return mount_dir;
+}
+
+int delete_dir_tree(const char *dir_path, bool remove_root)
+{
+	DIR *dir = NULL;
+	struct dirent *dp;
+	int result = 0;
+
+	dir = opendir(dir_path);
+	if (!dir) {
+		result = -errno;
+		goto out;
+	}
+
+	while ((dp = readdir(dir))) {
+		char *full_path;
+
+		if (!strcmp(dp->d_name, ".") || !strcmp(dp->d_name, ".."))
+			continue;
+
+		full_path = concat_file_name(dir_path, dp->d_name);
+		if (dp->d_type == DT_DIR)
+			result = delete_dir_tree(full_path, true);
+		else
+			result = unlink(full_path);
+		free(full_path);
+		if (result)
+			goto out;
+	}
+
+out:
+	if (dir)
+		closedir(dir);
+	if (!result && remove_root)
+		rmdir(dir_path);
+	return result;
+}
+
+static int mount_fuse_maybe_init(const char *mount_dir, int bpf_fd, int dir_fd,
+			     int *fuse_dev_ptr, bool init)
+{
+	int result = TEST_FAILURE;
+	int fuse_dev = -1;
+	char options[FILENAME_MAX];
+	uint8_t bytes_in[FUSE_MIN_READ_BUFFER];
+	uint8_t bytes_out[FUSE_MIN_READ_BUFFER];
+
+	DECL_FUSE_IN(init);
+
+	TEST(fuse_dev = open("/dev/fuse", O_RDWR | O_CLOEXEC), fuse_dev != -1);
+	snprintf(options, FILENAME_MAX, "fd=%d,user_id=0,group_id=0,rootmode=0040000",
+		 fuse_dev);
+	if (bpf_fd != -1)
+		snprintf(options + strlen(options),
+			 sizeof(options) - strlen(options),
+			 ",root_bpf=%d", bpf_fd);
+	if (dir_fd != -1)
+		snprintf(options + strlen(options),
+			 sizeof(options) - strlen(options),
+			 ",root_dir=%d", dir_fd);
+	TESTSYSCALL(mount("ABC", mount_dir, "fuse", 0, options));
+
+	if (init) {
+		TESTFUSEIN(FUSE_INIT, init_in);
+		TESTEQUAL(init_in->major, FUSE_KERNEL_VERSION);
+		TESTEQUAL(init_in->minor, FUSE_KERNEL_MINOR_VERSION);
+		TESTFUSEOUT1(fuse_init_out, ((struct fuse_init_out) {
+			.major = FUSE_KERNEL_VERSION,
+			.minor = FUSE_KERNEL_MINOR_VERSION,
+			.max_readahead = 4096,
+			.flags = 0,
+			.max_background = 0,
+			.congestion_threshold = 0,
+			.max_write = 4096,
+			.time_gran = 1000,
+			.max_pages = 12,
+			.map_alignment = 4096,
+		}));
+	}
+
+	*fuse_dev_ptr = fuse_dev;
+	fuse_dev = -1;
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	return result;
+}
+
+int mount_fuse(const char *mount_dir, int bpf_fd, int dir_fd, int *fuse_dev_ptr)
+{
+	return mount_fuse_maybe_init(mount_dir, bpf_fd, dir_fd, fuse_dev_ptr,
+				     true);
+}
+
+int mount_fuse_no_init(const char *mount_dir, int bpf_fd, int dir_fd,
+		       int *fuse_dev_ptr)
+{
+	return mount_fuse_maybe_init(mount_dir, bpf_fd, dir_fd, fuse_dev_ptr,
+				     false);
+}
+
+struct fuse_bpf_map {
+	unsigned int map_type;
+	size_t key_size;
+	size_t value_size;
+	unsigned int max_entries;
+};
+
+static int install_maps(Elf_Data *maps, int maps_index, Elf *elf,
+			Elf_Data *symbols, int symbol_index,
+			struct map_relocation **mr, size_t *map_count)
+{
+	int result = TEST_FAILURE;
+	int i;
+	GElf_Sym symbol;
+
+	TESTNE((void *)symbols, NULL);
+
+	for (i = 0; i < symbols->d_size / sizeof(symbol); ++i) {
+		TESTNE((void *)gelf_getsym(symbols, i, &symbol), 0);
+		if (symbol.st_shndx == maps_index) {
+			struct fuse_bpf_map *map;
+			union bpf_attr attr;
+			int map_fd;
+
+			map = (struct fuse_bpf_map *)
+				((char *)maps->d_buf + symbol.st_value);
+
+			attr = (union bpf_attr) {
+				.map_type = map->map_type,
+				.key_size = map->key_size,
+				.value_size = map->value_size,
+				.max_entries = map->max_entries,
+			};
+
+			TEST(*mr = realloc(*mr, ++*map_count *
+					   sizeof(struct fuse_bpf_map)),
+			     *mr);
+			TEST(map_fd = syscall(__NR_bpf, BPF_MAP_CREATE,
+					      &attr, sizeof(attr)),
+			     map_fd != -1);
+			(*mr)[*map_count - 1] = (struct map_relocation) {
+				.name = strdup(elf_strptr(elf, symbol_index,
+							  symbol.st_name)),
+				.fd = map_fd,
+				.value = symbol.st_value,
+			};
+		}
+	}
+
+	result = TEST_SUCCESS;
+out:
+	return result;
+}
+
+static inline int relocate_maps(GElf_Shdr *rel_header, Elf_Data *rel_data,
+			 Elf_Data *prog_data, Elf_Data *symbol_data,
+			 struct map_relocation *map_relocations,
+			 size_t map_count)
+{
+	int result = TEST_FAILURE;
+	int i;
+	struct bpf_insn *insns = (struct bpf_insn *) prog_data->d_buf;
+
+	for (i = 0; i < rel_header->sh_size / rel_header->sh_entsize; ++i) {
+		GElf_Sym sym;
+		GElf_Rel rel;
+		unsigned int insn_idx;
+		int map_idx;
+
+		gelf_getrel(rel_data, i, &rel);
+		insn_idx = rel.r_offset / sizeof(struct bpf_insn);
+		insns[insn_idx].src_reg = BPF_PSEUDO_MAP_FD;
+
+		gelf_getsym(symbol_data, GELF_R_SYM(rel.r_info), &sym);
+		for (map_idx = 0; map_idx < map_count; map_idx++) {
+			if (map_relocations[map_idx].value == sym.st_value) {
+				insns[insn_idx].imm =
+					map_relocations[map_idx].fd;
+				break;
+			}
+		}
+		TESTNE(map_idx, map_count);
+	}
+
+	result = TEST_SUCCESS;
+out:
+	return result;
+}
+
+static int install_elf_bpf_helper(const char *file, const char *section, int *fd,
+		    struct map_relocation **map_relocations, size_t *map_count,
+		    bool is_valid)
+{
+	int result = TEST_FAILURE;
+	char path[PATH_MAX] = {};
+	char *last_slash;
+	int filter_fd = -1;
+	union bpf_attr bpf_attr;
+	static char log[1 << 20];
+	Elf *elf = NULL;
+	GElf_Ehdr ehdr;
+	Elf_Data *data_prog = NULL, *data_maps = NULL, *data_symbols = NULL;
+	int maps_index, symbol_index, prog_index;
+	int i;
+
+	TESTNE(readlink("/proc/self/exe", path, PATH_MAX), -1);
+	TEST(last_slash = strrchr(path, '/'), last_slash);
+	strcpy(last_slash + 1, file);
+	TEST(filter_fd = open(path, O_RDONLY | O_CLOEXEC), filter_fd != -1);
+	TESTNE(elf_version(EV_CURRENT), EV_NONE);
+	TEST(elf = elf_begin(filter_fd, ELF_C_READ, NULL), elf);
+	TESTEQUAL((void *) gelf_getehdr(elf, &ehdr), &ehdr);
+	for (i = 1; i < ehdr.e_shnum; i++) {
+		char *shname;
+		GElf_Shdr shdr;
+		Elf_Scn *scn;
+
+		TEST(scn = elf_getscn(elf, i), scn);
+		TESTEQUAL((void *)gelf_getshdr(scn, &shdr), &shdr);
+		TEST(shname = elf_strptr(elf, ehdr.e_shstrndx, shdr.sh_name),
+		     shname);
+
+		if (!strcmp(shname, "maps")) {
+			TEST(data_maps = elf_getdata(scn, 0), data_maps);
+			maps_index = i;
+		} else if (shdr.sh_type == SHT_SYMTAB) {
+			TEST(data_symbols = elf_getdata(scn, 0), data_symbols);
+			symbol_index = shdr.sh_link;
+		} else if (!strcmp(shname, section)) {
+			TEST(data_prog = elf_getdata(scn, 0), data_prog);
+			prog_index = i;
+		}
+	}
+	TESTNE((void *) data_prog, NULL);
+
+	if (data_maps)
+		TESTEQUAL(install_maps(data_maps, maps_index, elf,
+				       data_symbols, symbol_index,
+				       map_relocations, map_count), 0);
+
+	/* Now relocate maps */
+	for (i = 1; i < ehdr.e_shnum; i++) {
+		GElf_Shdr rel_header;
+		Elf_Scn *scn;
+		Elf_Data *rel_data;
+
+		TEST(scn = elf_getscn(elf, i), scn);
+		TESTEQUAL((void *)gelf_getshdr(scn, &rel_header),
+			&rel_header);
+		if (rel_header.sh_type != SHT_REL)
+			continue;
+		TEST(rel_data = elf_getdata(scn, 0), rel_data);
+
+		if (rel_header.sh_info != prog_index)
+			continue;
+		TESTEQUAL(relocate_maps(&rel_header, rel_data,
+					data_prog, data_symbols,
+					*map_relocations, *map_count),
+			  0);
+	}
+
+	bpf_attr = (union bpf_attr) {
+		.prog_type = BPF_PROG_TYPE_FUSE,
+		.insn_cnt = data_prog->d_size / 8,
+		.insns = ptr_to_u64(data_prog->d_buf),
+		.license = ptr_to_u64("GPL"),
+		.log_buf = test_options.verbose ? ptr_to_u64(log) : 0,
+		.log_size = test_options.verbose ? sizeof(log) : 0,
+		.log_level = test_options.verbose ? 2 : 0,
+	};
+	*fd = syscall(__NR_bpf, BPF_PROG_LOAD, &bpf_attr, sizeof(bpf_attr));
+	if (test_options.verbose)
+		ksft_print_msg("%s\n", log);
+	if (*fd == -1 && errno == ENOSPC)
+		ksft_print_msg("bpf log size too small!\n");
+	if (is_valid)
+		TESTNE(*fd, -1);
+	else
+		TESTEQUAL(*fd, -1);
+
+	result = TEST_SUCCESS;
+out:
+	close(filter_fd);
+	return result;
+}
+
+int install_elf_bpf(const char *file, const char *section, int *fd,
+		    struct map_relocation **map_relocations, size_t *map_count)
+{
+	return install_elf_bpf_helper(file, section, fd, map_relocations,
+			map_count, true);
+}
+
+int install_elf_bpf_invalid(const char *file, const char *section, int *fd,
+		    struct map_relocation **map_relocations, size_t *map_count)
+{
+	return install_elf_bpf_helper(file, section, fd, map_relocations,
+			map_count, false);
+}
+
+
diff --git a/tools/testing/selftests/filesystems/fuse/fd.txt b/tools/testing/selftests/filesystems/fuse/fd.txt
new file mode 100644
index 000000000000..15ce77180d55
--- /dev/null
+++ b/tools/testing/selftests/filesystems/fuse/fd.txt
@@ -0,0 +1,21 @@
+fuse_daemon $*
+cd fd-dst
+ls
+cd show
+ls
+fsstress -s 123 -d . -p 4 -n 100 -l5
+echo test > wibble
+ls
+cat wibble
+fallocate -l 1000 wobble
+mkdir testdir
+mkdir tmpdir
+rmdir tmpdir
+touch tmp
+mv tmp tmp2
+rm tmp2
+
+# FUSE_LINK
+echo "ln_src contents" > ln_src
+ln ln_src ln_link
+cat ln_link
diff --git a/tools/testing/selftests/filesystems/fuse/fd_bpf.c b/tools/testing/selftests/filesystems/fuse/fd_bpf.c
new file mode 100644
index 000000000000..7d23c0fb95ae
--- /dev/null
+++ b/tools/testing/selftests/filesystems/fuse/fd_bpf.c
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+// Copyright (c) 2021 Google LLC
+
+#define __EXPORTED_HEADERS__
+#define __KERNEL__
+
+#include <uapi/linux/bpf.h>
+#include <uapi/linux/fuse.h>
+
+struct fuse_bpf_map {
+	int map_type;
+	size_t key_size;
+	size_t value_size;
+	int max_entries;
+};
+
+static void *(*bpf_map_lookup_elem)(struct fuse_bpf_map *map, void *key)
+	= (void *) 1;
+
+static void *(*bpf_map_update_elem)(struct fuse_bpf_map *map, void *key,
+				    void *value, int flags)
+	= (void *) 2;
+
+static long (*bpf_trace_printk)(const char *fmt, __u32 fmt_size, ...)
+	= (void *) 6;
+
+static long (*bpf_get_current_pid_tgid)()
+	= (void *) 14;
+
+static long (*bpf_get_current_uid_gid)()
+	= (void *) 15;
+
+#define bpf_printk(fmt, ...)					\
+	({			                                \
+		char ____fmt[] = fmt;                           \
+		bpf_trace_printk(____fmt, sizeof(____fmt),      \
+		                 ##__VA_ARGS__);                \
+	})
+
+inline const void *fa_verify_in(struct __bpf_fuse_args *fa, int i, unsigned int size)
+{
+	const char *val = (void *)(long) fa->in_args[i].value;
+	const char *end = (void *)(long) fa->in_args[i].end_offset;
+
+	if (i >= fa->in_numargs)
+		return NULL;
+	if (val + size <= end)
+		return val;
+	return NULL;
+}
+
+inline void *fa_verify_out(struct __bpf_fuse_args *fa, int i, unsigned int size)
+{
+	char *val = (void *)(long) fa->out_args[i].value;
+	char *end = (void *)(long) fa->out_args[i].end_offset;
+
+	if (i >= fa->out_numargs)
+		return NULL;
+	if (val + size <= end)
+		return val;
+	return NULL;
+}
+
+#define SEC(NAME) __attribute__((section(NAME), used))
+
+SEC("dummy")
+
+inline int strcmp(const char *a, const char *b)
+{
+	int i;
+
+	for (i = 0; i < __builtin_strlen(b) + 1; ++i)
+		if (a[i] != b[i])
+			return -1;
+
+	return 0;
+}
+
+SEC("maps") struct fuse_bpf_map test_map = {
+	BPF_MAP_TYPE_ARRAY,
+	sizeof(uint32_t),
+	sizeof(uint32_t),
+	1000,
+};
+
+SEC("maps") struct fuse_bpf_map test_map2 = {
+	BPF_MAP_TYPE_HASH,
+	sizeof(uint32_t),
+	sizeof(uint64_t),
+	76,
+};
+
+SEC("test_daemon")
+
+int trace_daemon(struct __bpf_fuse_args *fa)
+{
+	uint64_t uid_gid = bpf_get_current_uid_gid();
+	uint32_t uid = uid_gid & 0xffffffff;
+	uint64_t pid_tgid = bpf_get_current_pid_tgid();
+	uint32_t pid = pid_tgid & 0xffffffff;
+	uint32_t key = 23;
+	uint32_t *pvalue;
+
+
+	pvalue = bpf_map_lookup_elem(&test_map, &key);
+	if (pvalue) {
+		uint32_t value = *pvalue;
+
+		bpf_printk("pid %u uid %u value %u", pid, uid, value);
+		value++;
+		bpf_map_update_elem(&test_map, &key,  &value, BPF_ANY);
+	}
+
+	switch (fa->opcode) {
+	case FUSE_ACCESS | FUSE_PREFILTER: {
+		bpf_printk("Access: %d", fa->nodeid);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_GETATTR | FUSE_PREFILTER: {
+		const struct fuse_getattr_in *fgi = fa_verify_in(fa, 0, sizeof(*fgi));
+
+		if (!fgi)
+			return -1;
+
+		bpf_printk("Get Attr %d", fgi->fh);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_SETATTR | FUSE_PREFILTER: {
+		const struct fuse_setattr_in *fsi = fa_verify_in(fa, 0, sizeof(*fsi));
+
+		if (!fsi)
+			return -1;
+
+		bpf_printk("Set Attr %d", fsi->fh);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_OPENDIR | FUSE_PREFILTER: {
+		bpf_printk("Open Dir: %d", fa->nodeid);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_READDIR | FUSE_PREFILTER: {
+		const struct fuse_read_in *fri = fa_verify_in(fa, 0, sizeof(*fri));
+
+		if (!fri)
+			return -1;
+
+		bpf_printk("Read Dir: fh: %lu", fri->fh, fri->offset);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_LOOKUP | FUSE_PREFILTER: {
+		const char *name = (void *)(long)fa->in_args[0].value;
+
+		bpf_printk("Lookup: %lx %s", fa->nodeid, name);
+		if (fa->nodeid == 1)
+			return BPF_FUSE_USER_PREFILTER;
+		else
+			return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_MKNOD | FUSE_PREFILTER: {
+		const struct fuse_mknod_in *fmi = fa_verify_in(fa, 0, sizeof(*fmi));
+		const char *name = (void *)(long)fa->in_args[1].value;
+
+		if (!fmi)
+			return -1;
+
+		bpf_printk("mknod %s %x %x", name,  fmi->rdev | fmi->mode, fmi->umask);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_MKDIR | FUSE_PREFILTER: {
+		const struct fuse_mkdir_in *fmi = fa_verify_in(fa, 0, sizeof(*fmi));
+		const char *name = (void *)(long)fa->in_args[1].value;
+
+		if (!fmi)
+			return -1;
+
+		bpf_printk("mkdir: %s %x %x", name, fmi->mode, fmi->umask);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_RMDIR | FUSE_PREFILTER: {
+		const char *name = (void *)(long)fa->in_args[0].value;
+
+		bpf_printk("rmdir: %s", name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_RENAME | FUSE_PREFILTER: {
+		const char *oldname = (void *)(long) fa->in_args[1].value;
+		const char *newname = (void *)(long) fa->in_args[2].value;
+
+		bpf_printk("rename from %s", oldname);
+		bpf_printk("rename to %s", newname);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_RENAME2 | FUSE_PREFILTER: {
+		const struct fuse_rename2_in *fri = fa_verify_in(fa, 0, sizeof(*fri));
+		uint32_t flags = fri->flags;
+		const char *oldname = (void *)(long) fa->in_args[1].value;
+		const char *newname = (void *)(long) fa->in_args[2].value;
+
+		if (!fri)
+			return -1;
+
+		bpf_printk("rename(%x) from %s", flags, oldname);
+		bpf_printk("rename to %s", newname);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_UNLINK | FUSE_PREFILTER: {
+		const char *name = (void *)(long)fa->in_args[0].value;
+
+		bpf_printk("unlink: %s", name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_LINK | FUSE_PREFILTER: {
+		const struct fuse_link_in *fli = fa_verify_in(fa, 0, sizeof(*fli));
+		const char *dst_name = (void *)(long) fa->in_args[1].value;
+
+		if (!fli)
+			return -1;
+
+		bpf_printk("Link: %d %s", fli->oldnodeid, dst_name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_SYMLINK | FUSE_PREFILTER: {
+		const char *link_name = (void *)(long) fa->in_args[0].value;
+		const char *link_dest = (void *)(long) fa->in_args[1].value;
+
+		bpf_printk("symlink from %s", link_name);
+		bpf_printk("symlink to %s", link_dest);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_READLINK | FUSE_PREFILTER: {
+		const char *link_name = (void *)(long) fa->in_args[0].value;
+
+		bpf_printk("readlink from %s", link_name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_RELEASE | FUSE_PREFILTER: {
+		const struct fuse_release_in *fri = fa_verify_in(fa, 0, sizeof(*fri));
+
+		if (!fri)
+			return -1;
+
+		bpf_printk("Release: %d", fri->fh);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_RELEASEDIR | FUSE_PREFILTER: {
+		const struct fuse_release_in *fri = fa_verify_in(fa, 0, sizeof(*fri));
+
+		if (!fri)
+			return -1;
+
+		bpf_printk("Release Dir: %d", fri->fh);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_CREATE | FUSE_PREFILTER: {
+		bpf_printk("Create %s", fa->in_args[1].value);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_OPEN | FUSE_PREFILTER: {
+		bpf_printk("Open: %d", fa->nodeid);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_READ | FUSE_PREFILTER: {
+		const struct fuse_read_in *fri = fa_verify_in(fa, 0, sizeof(*fri));
+
+		if (!fri)
+			return -1;
+
+		bpf_printk("Read: fh: %lu, offset %lu, size %lu",
+			   fri->fh, fri->offset, fri->size);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_WRITE | FUSE_PREFILTER: {
+		const struct fuse_write_in *fwi = fa_verify_in(fa, 0, sizeof(*fwi));
+
+		if (!fwi)
+			return -1;
+
+		bpf_printk("Write: fh: %lu, offset %lu, size %lu",
+			   fwi->fh, fwi->offset, fwi->size);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_FLUSH | FUSE_PREFILTER: {
+		const struct fuse_flush_in *ffi = fa_verify_in(fa, 0, sizeof(*ffi));
+
+		if (!ffi)
+			return -1;
+
+		bpf_printk("Flush %d", ffi->fh);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_FALLOCATE | FUSE_PREFILTER: {
+		const struct fuse_fallocate_in *ffa = fa_verify_in(fa, 0, sizeof(*ffa));
+
+		if (!ffa)
+			return -1;
+
+		bpf_printk("Fallocate %d %lu", ffa->fh, ffa->length);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_GETXATTR | FUSE_PREFILTER: {
+		const char *name = (void *)(long)fa->in_args[1].value;
+
+		bpf_printk("Getxattr %d %s", fa->nodeid, name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_LISTXATTR | FUSE_PREFILTER: {
+		const char *name = (void *)(long)fa->in_args[1].value;
+
+		bpf_printk("Listxattr %d %s", fa->nodeid, name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_SETXATTR | FUSE_PREFILTER: {
+		const char *name = (void *)(long)fa->in_args[1].value;
+
+		bpf_printk("Setxattr %d %s", fa->nodeid, name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_STATFS | FUSE_PREFILTER: {
+		bpf_printk("statfs %d", fa->nodeid);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_LSEEK | FUSE_PREFILTER: {
+		const struct fuse_lseek_in *fli = fa_verify_in(fa, 0, sizeof(*fli));
+
+		if (!fli)
+			return -1;
+
+		bpf_printk("lseek type:%d, offset:%lld", fli->whence, fli->offset);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	default:
+		if (fa->opcode & FUSE_PREFILTER)
+			bpf_printk("prefilter *** UNKNOWN *** opcode: %d",
+				   fa->opcode & FUSE_OPCODE_FILTER);
+		else if (fa->opcode & FUSE_POSTFILTER)
+			bpf_printk("postfilter *** UNKNOWN *** opcode: %d",
+				   fa->opcode & FUSE_OPCODE_FILTER);
+		else
+			bpf_printk("*** UNKNOWN *** opcode: %d", fa->opcode);
+		return BPF_FUSE_CONTINUE;
+	}
+}
diff --git a/tools/testing/selftests/filesystems/fuse/fuse_daemon.c b/tools/testing/selftests/filesystems/fuse/fuse_daemon.c
new file mode 100644
index 000000000000..c3c1206b8f35
--- /dev/null
+++ b/tools/testing/selftests/filesystems/fuse/fuse_daemon.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Google LLC
+ */
+
+#include "test_fuse.h"
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/mount.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+
+#include <linux/unistd.h>
+
+#include <uapi/linux/fuse.h>
+#include <uapi/linux/bpf.h>
+
+bool user_messages;
+bool kernel_messages;
+
+static int display_trace(void)
+{
+	int pid = -1;
+	int tp = -1;
+	char c;
+	ssize_t bytes_read;
+	static char line[256] = {0};
+
+	if (!kernel_messages)
+		return TEST_SUCCESS;
+
+	TEST(pid = fork(), pid != -1);
+	if (pid != 0)
+		return pid;
+
+	TESTEQUAL(tracing_on(), 0);
+	TEST(tp = s_open(s_path(tracing_folder(), s("trace_pipe")),
+			 O_RDONLY | O_CLOEXEC), tp != -1);
+	for (;;) {
+		TEST(bytes_read = read(tp, &c, sizeof(c)),
+		     bytes_read == 1);
+		if (c == '\n') {
+			printf("%s\n", line);
+			line[0] = 0;
+		} else
+			sprintf(line + strlen(line), "%c", c);
+	}
+out:
+	if (pid == 0) {
+		close(tp);
+		exit(TEST_FAILURE);
+	}
+	return pid;
+}
+
+static const char *fuse_opcode_to_string(int opcode)
+{
+	switch (opcode & FUSE_OPCODE_FILTER) {
+	case FUSE_LOOKUP:
+		return "FUSE_LOOKUP";
+	case FUSE_FORGET:
+		return "FUSE_FORGET";
+	case FUSE_GETATTR:
+		return "FUSE_GETATTR";
+	case FUSE_SETATTR:
+		return "FUSE_SETATTR";
+	case FUSE_READLINK:
+		return "FUSE_READLINK";
+	case FUSE_SYMLINK:
+		return "FUSE_SYMLINK";
+	case FUSE_MKNOD:
+		return "FUSE_MKNOD";
+	case FUSE_MKDIR:
+		return "FUSE_MKDIR";
+	case FUSE_UNLINK:
+		return "FUSE_UNLINK";
+	case FUSE_RMDIR:
+		return "FUSE_RMDIR";
+	case FUSE_RENAME:
+		return "FUSE_RENAME";
+	case FUSE_LINK:
+		return "FUSE_LINK";
+	case FUSE_OPEN:
+		return "FUSE_OPEN";
+	case FUSE_READ:
+		return "FUSE_READ";
+	case FUSE_WRITE:
+		return "FUSE_WRITE";
+	case FUSE_STATFS:
+		return "FUSE_STATFS";
+	case FUSE_RELEASE:
+		return "FUSE_RELEASE";
+	case FUSE_FSYNC:
+		return "FUSE_FSYNC";
+	case FUSE_SETXATTR:
+		return "FUSE_SETXATTR";
+	case FUSE_GETXATTR:
+		return "FUSE_GETXATTR";
+	case FUSE_LISTXATTR:
+		return "FUSE_LISTXATTR";
+	case FUSE_REMOVEXATTR:
+		return "FUSE_REMOVEXATTR";
+	case FUSE_FLUSH:
+		return "FUSE_FLUSH";
+	case FUSE_INIT:
+		return "FUSE_INIT";
+	case FUSE_OPENDIR:
+		return "FUSE_OPENDIR";
+	case FUSE_READDIR:
+		return "FUSE_READDIR";
+	case FUSE_RELEASEDIR:
+		return "FUSE_RELEASEDIR";
+	case FUSE_FSYNCDIR:
+		return "FUSE_FSYNCDIR";
+	case FUSE_GETLK:
+		return "FUSE_GETLK";
+	case FUSE_SETLK:
+		return "FUSE_SETLK";
+	case FUSE_SETLKW:
+		return "FUSE_SETLKW";
+	case FUSE_ACCESS:
+		return "FUSE_ACCESS";
+	case FUSE_CREATE:
+		return "FUSE_CREATE";
+	case FUSE_INTERRUPT:
+		return "FUSE_INTERRUPT";
+	case FUSE_BMAP:
+		return "FUSE_BMAP";
+	case FUSE_DESTROY:
+		return "FUSE_DESTROY";
+	case FUSE_IOCTL:
+		return "FUSE_IOCTL";
+	case FUSE_POLL:
+		return "FUSE_POLL";
+	case FUSE_NOTIFY_REPLY:
+		return "FUSE_NOTIFY_REPLY";
+	case FUSE_BATCH_FORGET:
+		return "FUSE_BATCH_FORGET";
+	case FUSE_FALLOCATE:
+		return "FUSE_FALLOCATE";
+	case FUSE_READDIRPLUS:
+		return "FUSE_READDIRPLUS";
+	case FUSE_RENAME2:
+		return "FUSE_RENAME2";
+	case FUSE_LSEEK:
+		return "FUSE_LSEEK";
+	case FUSE_COPY_FILE_RANGE:
+		return "FUSE_COPY_FILE_RANGE";
+	case FUSE_SETUPMAPPING:
+		return "FUSE_SETUPMAPPING";
+	case FUSE_REMOVEMAPPING:
+		return "FUSE_REMOVEMAPPING";
+	//case FUSE_SYNCFS:
+	//	return "FUSE_SYNCFS";
+	case CUSE_INIT:
+		return "CUSE_INIT";
+	case CUSE_INIT_BSWAP_RESERVED:
+		return "CUSE_INIT_BSWAP_RESERVED";
+	case FUSE_INIT_BSWAP_RESERVED:
+		return "FUSE_INIT_BSWAP_RESERVED";
+	}
+	return "?";
+}
+
+static int parse_options(int argc, char *const *argv)
+{
+	signed char c;
+
+	while ((c = getopt(argc, argv, "kuv")) != -1)
+		switch (c) {
+		case 'v':
+			test_options.verbose = true;
+			break;
+
+		case 'u':
+			user_messages = true;
+			break;
+
+		case 'k':
+			kernel_messages = true;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+	int result = TEST_FAILURE;
+	int trace_pid = -1;
+	char *mount_dir = NULL;
+	char *src_dir = NULL;
+	int bpf_fd = -1;
+	int src_fd = -1;
+	int fuse_dev = -1;
+	struct map_relocation *map_relocations = NULL;
+	size_t map_count = 0;
+	int i;
+
+	if (geteuid() != 0)
+		ksft_print_msg("Not a root, might fail to mount.\n");
+	TESTEQUAL(parse_options(argc, argv), 0);
+
+	TEST(trace_pid = display_trace(), trace_pid != -1);
+
+	delete_dir_tree("fd-src", true);
+	TEST(src_dir = setup_mount_dir("fd-src"), src_dir);
+	delete_dir_tree("fd-dst", true);
+	TEST(mount_dir = setup_mount_dir("fd-dst"), mount_dir);
+
+	TESTEQUAL(install_elf_bpf("fd_bpf.bpf", "test_daemon", &bpf_fd,
+				  &map_relocations, &map_count), 0);
+
+	TEST(src_fd = open("fd-src", O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTSYSCALL(mkdirat(src_fd, "show", 0777));
+	TESTSYSCALL(mkdirat(src_fd, "hide", 0777));
+
+	for (i = 0; i < map_count; ++i)
+		if (!strcmp(map_relocations[i].name, "test_map")) {
+			uint32_t key = 23;
+			uint32_t value = 1234;
+			union bpf_attr attr = {
+				.map_fd = map_relocations[i].fd,
+				.key    = ptr_to_u64(&key),
+				.value  = ptr_to_u64(&value),
+				.flags  = BPF_ANY,
+			};
+			TESTSYSCALL(syscall(__NR_bpf, BPF_MAP_UPDATE_ELEM,
+					    &attr, sizeof(attr)));
+		}
+
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	if (fork())
+		return 0;
+
+	for (;;) {
+		uint8_t bytes_in[FUSE_MIN_READ_BUFFER];
+		uint8_t bytes_out[FUSE_MIN_READ_BUFFER] __attribute__((unused));
+		struct fuse_in_header *in_header =
+			(struct fuse_in_header *)bytes_in;
+		ssize_t res = read(fuse_dev, bytes_in, sizeof(bytes_in));
+
+		if (res == -1)
+			break;
+
+		switch (in_header->opcode) {
+		case FUSE_LOOKUP | FUSE_PREFILTER: {
+			char *name = (char *)(bytes_in + sizeof(*in_header));
+
+			if (user_messages)
+				printf("Lookup %s\n", name);
+			if (!strcmp(name, "hide"))
+				TESTFUSEOUTERROR(-ENOENT);
+			else
+				TESTFUSEOUTREAD(name, strlen(name) + 1);
+			break;
+		}
+		default:
+			if (user_messages) {
+				printf("opcode is %d (%s)\n", in_header->opcode,
+				       fuse_opcode_to_string(
+					       in_header->opcode));
+			}
+			break;
+		}
+	}
+
+	result = TEST_SUCCESS;
+
+out:
+	for (i = 0; i < map_count; ++i) {
+		free(map_relocations[i].name);
+		close(map_relocations[i].fd);
+	}
+	free(map_relocations);
+	umount2(mount_dir, MNT_FORCE);
+	delete_dir_tree(mount_dir, true);
+	free(mount_dir);
+	delete_dir_tree(src_dir, true);
+	free(src_dir);
+	if (trace_pid != -1)
+		kill(trace_pid, SIGKILL);
+	return result;
+}
diff --git a/tools/testing/selftests/filesystems/fuse/fuse_test.c b/tools/testing/selftests/filesystems/fuse/fuse_test.c
new file mode 100644
index 000000000000..40545ab29cbd
--- /dev/null
+++ b/tools/testing/selftests/filesystems/fuse/fuse_test.c
@@ -0,0 +1,2147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Google LLC
+ */
+#define _GNU_SOURCE
+
+#include "test_fuse.h"
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/inotify.h>
+#include <sys/mman.h>
+#include <sys/mount.h>
+#include <sys/syscall.h>
+#include <sys/wait.h>
+
+#include <linux/capability.h>
+#include <linux/random.h>
+
+#include <uapi/linux/fuse.h>
+#include <uapi/linux/bpf.h>
+
+static const char *ft_src = "ft-src";
+static const char *ft_dst = "ft-dst";
+
+static void fill_buffer(uint8_t *data, size_t len, int file, int block)
+{
+	int i;
+	int seed = 7919 * file + block;
+
+	for (i = 0; i < len; i++) {
+		seed = 1103515245 * seed + 12345;
+		data[i] = (uint8_t)(seed >> (i % 13));
+	}
+}
+
+static bool test_buffer(uint8_t *data, size_t len, int file, int block)
+{
+	int i;
+	int seed = 7919 * file + block;
+
+	for (i = 0; i < len; i++) {
+		seed = 1103515245 * seed + 12345;
+		if (data[i] != (uint8_t)(seed >> (i % 13)))
+			return false;
+	}
+
+	return true;
+}
+
+static int create_file(int dir, struct s name, int index, size_t blocks)
+{
+	int result = TEST_FAILURE;
+	int fd = -1;
+	int i;
+	uint8_t data[PAGE_SIZE];
+
+	TEST(fd = s_openat(dir, name, O_CREAT | O_WRONLY, 0777), fd != -1);
+	for (i = 0; i < blocks; ++i) {
+		fill_buffer(data, PAGE_SIZE, index, i);
+		TESTEQUAL(write(fd, data, sizeof(data)), PAGE_SIZE);
+	}
+	TESTSYSCALL(close(fd));
+	result = TEST_SUCCESS;
+
+out:
+	close(fd);
+	return result;
+}
+
+static int bpf_clear_trace(void)
+{
+	int result = TEST_FAILURE;
+	int tp = -1;
+
+	TEST(tp = s_open(s_path(tracing_folder(), s("trace")),
+			 O_WRONLY | O_TRUNC | O_CLOEXEC), tp != -1);
+
+	result = TEST_SUCCESS;
+out:
+	close(tp);
+	return result;
+}
+
+static int bpf_test_trace_maybe(const char *substr, bool present)
+{
+	int result = TEST_FAILURE;
+	int tp = -1;
+	char trace_buffer[4096] = {};
+	ssize_t bytes_read;
+
+	TEST(tp = s_open(s_path(tracing_folder(), s("trace_pipe")),
+			 O_RDONLY | O_CLOEXEC),
+	     tp != -1);
+	fcntl(tp, F_SETFL, O_NONBLOCK);
+
+	for (;;) {
+		bytes_read = read(tp, trace_buffer, sizeof(trace_buffer));
+		if (present)
+			TESTCOND(bytes_read > 0);
+		else if (bytes_read <= 0) {
+			result = TEST_SUCCESS;
+			break;
+		}
+
+		if (test_options.verbose)
+			ksft_print_msg("%s\n", trace_buffer);
+
+		if (strstr(trace_buffer, substr)) {
+			if (present)
+				result = TEST_SUCCESS;
+			break;
+		}
+	}
+out:
+	close(tp);
+	return result;
+}
+
+static int bpf_test_trace(const char *substr)
+{
+	return bpf_test_trace_maybe(substr, true);
+}
+
+static int bpf_test_no_trace(const char *substr)
+{
+	return bpf_test_trace_maybe(substr, false);
+}
+
+static int basic_test(const char *mount_dir)
+{
+	const char *test_name = "test";
+	const char *test_data = "data";
+
+	int result = TEST_FAILURE;
+	int fuse_dev = -1;
+	char *filename = NULL;
+	int fd = -1;
+	int pid = -1;
+	int status;
+
+	TESTEQUAL(mount_fuse(mount_dir, -1, -1, &fuse_dev), 0);
+	FUSE_ACTION
+		char data[256];
+
+		filename = concat_file_name(mount_dir, test_name);
+		TESTERR(fd = open(filename, O_RDONLY | O_CLOEXEC), fd != -1);
+		TESTEQUAL(read(fd, data, strlen(test_data)), strlen(test_data));
+		TESTCOND(!strcmp(data, test_data));
+		TESTSYSCALL(close(fd));
+		fd = -1;
+	FUSE_DAEMON
+		DECL_FUSE_IN(open);
+		DECL_FUSE_IN(read);
+		DECL_FUSE_IN(flush);
+		DECL_FUSE_IN(release);
+
+		TESTFUSELOOKUP(test_name, 0);
+		TESTFUSEOUT1(fuse_entry_out, ((struct fuse_entry_out) {
+			.nodeid		= 2,
+			.generation	= 1,
+			.attr.ino = 100,
+			.attr.size = 4,
+			.attr.blksize = 512,
+			.attr.mode = S_IFREG | 0777,
+			}));
+
+		TESTFUSEIN(FUSE_OPEN, open_in);
+		TESTFUSEOUT1(fuse_open_out, ((struct fuse_open_out) {
+			.fh = 1,
+			.open_flags = open_in->flags,
+		}));
+
+		TESTFUSEIN(FUSE_READ, read_in);
+		TESTFUSEOUTREAD(test_data, strlen(test_data));
+
+		TESTFUSEIN(FUSE_FLUSH, flush_in);
+		TESTFUSEOUTEMPTY();
+
+		TESTFUSEIN(FUSE_RELEASE, release_in);
+		TESTFUSEOUTEMPTY();
+	FUSE_DONE
+
+	result = TEST_SUCCESS;
+out:
+	if (!pid)
+		exit(TEST_FAILURE);
+	close(fuse_dev);
+	close(fd);
+	free(filename);
+	umount(mount_dir);
+	return result;
+}
+
+static int bpf_test_real(const char *mount_dir)
+{
+	const char *test_name = "real";
+	const char *test_data = "Weebles wobble but they don't fall down";
+	int result = TEST_FAILURE;
+	int bpf_fd = -1;
+	int src_fd = -1;
+	int fuse_dev = -1;
+	char *filename = NULL;
+	int fd = -1;
+	char read_buffer[256] = {};
+	ssize_t bytes_read;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TEST(fd = openat(src_fd, test_name, O_CREAT | O_RDWR | O_CLOEXEC, 0777),
+	     fd != -1);
+	TESTEQUAL(write(fd, test_data, strlen(test_data)), strlen(test_data));
+	TESTSYSCALL(close(fd));
+	fd = -1;
+
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	filename = concat_file_name(mount_dir, test_name);
+	TESTERR(fd = open(filename, O_RDONLY | O_CLOEXEC), fd != -1);
+	bytes_read = read(fd, read_buffer, strlen(test_data));
+	TESTEQUAL(bytes_read, strlen(test_data));
+	TESTEQUAL(strcmp(test_data, read_buffer), 0);
+	TESTEQUAL(bpf_test_trace("read"), 0);
+
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	close(fd);
+	free(filename);
+	umount(mount_dir);
+	close(src_fd);
+	close(bpf_fd);
+	return result;
+}
+
+
+static int bpf_test_partial(const char *mount_dir)
+{
+	const char *test_name = "partial";
+	int result = TEST_FAILURE;
+	int bpf_fd = -1;
+	int src_fd = -1;
+	int fuse_dev = -1;
+	char *filename = NULL;
+	int fd = -1;
+	int pid = -1;
+	int status;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(create_file(src_fd, s(test_name), 1, 2), 0);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	FUSE_ACTION
+		uint8_t data[PAGE_SIZE];
+
+		TEST(filename = concat_file_name(mount_dir, test_name),
+		     filename);
+		TESTERR(fd = open(filename, O_RDONLY | O_CLOEXEC), fd != -1);
+		TESTEQUAL(read(fd, data, PAGE_SIZE), PAGE_SIZE);
+		TESTEQUAL(bpf_test_trace("read"), 0);
+		TESTCOND(test_buffer(data, PAGE_SIZE, 2, 0));
+		TESTCOND(!test_buffer(data, PAGE_SIZE, 1, 0));
+		TESTEQUAL(read(fd, data, PAGE_SIZE), PAGE_SIZE);
+		TESTCOND(test_buffer(data, PAGE_SIZE, 1, 1));
+		TESTCOND(!test_buffer(data, PAGE_SIZE, 2, 1));
+		TESTSYSCALL(close(fd));
+		fd = -1;
+	FUSE_DAEMON
+		DECL_FUSE(open);
+		DECL_FUSE(read);
+		DECL_FUSE(release);
+		uint8_t data[PAGE_SIZE];
+
+		TESTFUSEIN2(FUSE_OPEN | FUSE_POSTFILTER, open_in, open_out);
+		TESTFUSEOUT1(fuse_open_out, ((struct fuse_open_out) {
+			.fh = 1,
+			.open_flags = open_in->flags,
+		}));
+
+		TESTFUSEIN(FUSE_READ, read_in);
+		fill_buffer(data, PAGE_SIZE, 2, 0);
+		TESTFUSEOUTREAD(data, PAGE_SIZE);
+
+		TESTFUSEIN(FUSE_RELEASE, release_in);
+		TESTFUSEOUTEMPTY();
+	FUSE_DONE
+
+	result = TEST_SUCCESS;
+out:
+	if (!pid)
+		exit(TEST_FAILURE);
+	close(fuse_dev);
+	close(fd);
+	free(filename);
+	umount(mount_dir);
+	close(src_fd);
+	close(bpf_fd);
+	return result;
+}
+
+static int bpf_test_attrs(const char *mount_dir)
+{
+	const char *test_name = "partial";
+	int result = TEST_FAILURE;
+	int bpf_fd = -1;
+	int src_fd = -1;
+	int fuse_dev = -1;
+	char *filename = NULL;
+	struct stat st;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(create_file(src_fd, s(test_name), 1, 2), 0);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TEST(filename = concat_file_name(mount_dir, test_name), filename);
+	TESTSYSCALL(stat(filename, &st));
+	TESTSYSCALL(chmod(filename, 0111));
+	TESTSYSCALL(stat(filename, &st));
+	TESTEQUAL(st.st_mode & 0777, 0111);
+	TESTSYSCALL(chmod(filename, 0777));
+	TESTSYSCALL(stat(filename, &st));
+	TESTEQUAL(st.st_mode & 0777, 0777);
+	TESTSYSCALL(chown(filename, 5, 6));
+	TESTSYSCALL(stat(filename, &st));
+	TESTEQUAL(st.st_uid, 5);
+	TESTEQUAL(st.st_gid, 6);
+
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	free(filename);
+	umount(mount_dir);
+	close(src_fd);
+	close(bpf_fd);
+	return result;
+}
+
+static int bpf_test_readdir(const char *mount_dir)
+{
+	const char *names[] = {"real", "partial", "fake", ".", ".."};
+	int result = TEST_FAILURE;
+	int bpf_fd = -1;
+	int src_fd = -1;
+	int fuse_dev = -1;
+	int pid = -1;
+	int status;
+	DIR *dir = NULL;
+	struct dirent *dirent;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(create_file(src_fd, s(names[0]), 1, 2), 0);
+	TESTEQUAL(create_file(src_fd, s(names[1]), 1, 2), 0);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	FUSE_ACTION
+		int i, j;
+
+		TEST(dir = s_opendir(s(mount_dir)), dir);
+		TESTEQUAL(bpf_test_trace("opendir"), 0);
+
+		for (i = 0; i < ARRAY_SIZE(names); ++i) {
+			TEST(dirent = readdir(dir), dirent);
+
+			for (j = 0; j < ARRAY_SIZE(names); ++j)
+				if (names[j] &&
+				    strcmp(names[j], dirent->d_name) == 0) {
+					names[j] = NULL;
+					break;
+				}
+			TESTNE(j, ARRAY_SIZE(names));
+		}
+		TEST(dirent = readdir(dir), dirent == NULL);
+		TESTSYSCALL(closedir(dir));
+		dir = NULL;
+		TESTEQUAL(bpf_test_trace("readdir"), 0);
+	FUSE_DAEMON
+		struct fuse_in_header *in_header =
+			(struct fuse_in_header *)bytes_in;
+		ssize_t res = read(fuse_dev, bytes_in, sizeof(bytes_in));
+		struct fuse_read_out *read_out =
+			(struct fuse_read_out *) (bytes_in +
+					sizeof(*in_header) +
+					sizeof(struct fuse_read_in));
+		struct fuse_dirent *fuse_dirent =
+			(struct fuse_dirent *) (bytes_in + res);
+
+		TESTGE(res, sizeof(*in_header) + sizeof(struct fuse_read_in));
+		TESTEQUAL(in_header->opcode, FUSE_READDIR | FUSE_POSTFILTER);
+		*fuse_dirent = (struct fuse_dirent) {
+			.ino = 100,
+			.off = 5,
+			.namelen = strlen("fake"),
+			.type = DT_REG,
+		};
+		strcpy((char *)(bytes_in + res + sizeof(*fuse_dirent)), "fake");
+		res += FUSE_DIRENT_ALIGN(sizeof(*fuse_dirent) + strlen("fake") +
+					 1);
+		TESTFUSEDIROUTREAD(read_out,
+				bytes_in +
+				   sizeof(struct fuse_in_header) +
+				   sizeof(struct fuse_read_in) +
+				   sizeof(struct fuse_read_out),
+				res - sizeof(struct fuse_in_header) -
+				    sizeof(struct fuse_read_in) -
+				    sizeof(struct fuse_read_out));
+		res = read(fuse_dev, bytes_in, sizeof(bytes_in));
+		TESTEQUAL(res, sizeof(*in_header) +
+			  sizeof(struct fuse_read_in) +
+			  sizeof(struct fuse_read_out));
+		TESTEQUAL(in_header->opcode, FUSE_READDIR | FUSE_POSTFILTER);
+		TESTFUSEDIROUTREAD(read_out, bytes_in, 0);
+	FUSE_DONE
+
+	result = TEST_SUCCESS;
+out:
+	closedir(dir);
+	close(fuse_dev);
+	umount(mount_dir);
+	close(src_fd);
+	close(bpf_fd);
+	return result;
+}
+
+static int bpf_test_redact_readdir(const char *mount_dir)
+{
+	const char *names[] = {"f1", "f2", "f3", "f4", "f5", "f6", ".", ".."};
+	int num_shown = (ARRAY_SIZE(names) - 2) / 2 + 2;
+	int result = TEST_FAILURE;
+	int bpf_fd = -1;
+	int src_fd = -1;
+	int fuse_dev = -1;
+	int pid = -1;
+	int status;
+	DIR *dir = NULL;
+	struct dirent *dirent;
+	int i;
+	int count = 0;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	for (i = 0; i < ARRAY_SIZE(names) - 2; i++)
+		TESTEQUAL(create_file(src_fd, s(names[i]), 1, 2), 0);
+
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_readdir_redact",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	FUSE_ACTION
+		int j;
+
+		TEST(dir = s_opendir(s(mount_dir)), dir);
+		while ((dirent = readdir(dir))) {
+			errno = 0;
+			TESTEQUAL(errno, 0);
+
+			for (j = 0; j < ARRAY_SIZE(names); ++j)
+				if (names[j] &&
+				    strcmp(names[j], dirent->d_name) == 0) {
+					names[j] = NULL;
+					count++;
+					break;
+				}
+			TESTNE(j, ARRAY_SIZE(names));
+			TESTGE(num_shown, count);
+		}
+		TESTEQUAL(count, num_shown);
+		TESTSYSCALL(closedir(dir));
+		dir = NULL;
+	FUSE_DAEMON
+		bool skip = true;
+		for (int i = 0; i < ARRAY_SIZE(names) + 1; i++) {
+			uint8_t bytes_in[FUSE_MIN_READ_BUFFER];
+			uint8_t bytes_out[FUSE_MIN_READ_BUFFER];
+			struct fuse_in_header *in_header =
+				(struct fuse_in_header *)bytes_in;
+			ssize_t res = read(fuse_dev, bytes_in, sizeof(bytes_in));
+			int length_out = 0;
+			uint8_t *pos;
+			uint8_t *dirs_in;
+			uint8_t *dirs_out;
+			struct fuse_read_in *fuse_read_in;
+			struct fuse_read_out *fuse_read_out_in;
+			struct fuse_read_out *fuse_read_out_out;
+			struct fuse_dirent *fuse_dirent_in = NULL;
+			struct fuse_dirent *next = NULL;
+			bool again = false;
+			int dir_ent_len = 0;
+
+			TESTGE(res, sizeof(struct fuse_in_header) +
+					sizeof(struct fuse_read_in) +
+					sizeof(struct fuse_read_out));
+
+			pos = bytes_in + sizeof(struct fuse_in_header);
+			fuse_read_in = (struct fuse_read_in *) pos;
+			pos += sizeof(*fuse_read_in);
+			fuse_read_out_in = (struct fuse_read_out *) pos;
+			pos += sizeof(*fuse_read_out_in);
+			dirs_in = pos;
+
+			pos = bytes_out + sizeof(struct fuse_out_header);
+			fuse_read_out_out = (struct fuse_read_out *) pos;
+			pos += sizeof(*fuse_read_out_out);
+			dirs_out = pos;
+
+			if (dirs_in < bytes_in + res) {
+				bool is_dot;
+
+				fuse_dirent_in = (struct fuse_dirent *) dirs_in;
+				is_dot = (fuse_dirent_in->namelen == 1 &&
+						!strncmp(fuse_dirent_in->name, ".", 1)) ||
+					 (fuse_dirent_in->namelen == 2 &&
+						!strncmp(fuse_dirent_in->name, "..", 2));
+
+				dir_ent_len = FUSE_DIRENT_ALIGN(
+					sizeof(*fuse_dirent_in) +
+					fuse_dirent_in->namelen);
+
+				if (dirs_in + dir_ent_len < bytes_in + res)
+					next = (struct fuse_dirent *)
+							(dirs_in + dir_ent_len);
+
+				if (!skip || is_dot) {
+					memcpy(dirs_out, fuse_dirent_in,
+					       sizeof(struct fuse_dirent) +
+					       fuse_dirent_in->namelen);
+					length_out += dir_ent_len;
+				}
+				again = ((skip && !is_dot) && next);
+
+				if (!is_dot)
+					skip = !skip;
+			}
+
+			fuse_read_out_out->offset = next ? next->off :
+					fuse_read_out_in->offset;
+			fuse_read_out_out->again = again;
+
+			{
+			struct fuse_out_header *out_header =
+				(struct fuse_out_header *)bytes_out;
+
+			*out_header = (struct fuse_out_header) {
+				.len = sizeof(*out_header) +
+				       sizeof(*fuse_read_out_out) + length_out,
+				.unique = in_header->unique,
+			};
+			TESTEQUAL(write(fuse_dev, bytes_out, out_header->len),
+				  out_header->len);
+			}
+		}
+	FUSE_DONE
+
+	result = TEST_SUCCESS;
+out:
+	closedir(dir);
+	close(fuse_dev);
+	umount(mount_dir);
+	close(src_fd);
+	close(bpf_fd);
+	return result;
+}
+
+/*
+ * This test is more to show what classic fuse does with a creat in a subdir
+ * than a test of any new functionality
+ */
+static int bpf_test_creat(const char *mount_dir)
+{
+	const char *dir_name = "show";
+	const char *file_name = "file";
+	int result = TEST_FAILURE;
+	int fuse_dev = -1;
+	int pid = -1;
+	int status;
+	int fd = -1;
+
+	TESTEQUAL(mount_fuse(mount_dir, -1, -1, &fuse_dev), 0);
+
+	FUSE_ACTION
+		TEST(fd = s_creat(s_path(s_path(s(mount_dir), s(dir_name)),
+					 s(file_name)),
+				  0777),
+		     fd != -1);
+		TESTSYSCALL(close(fd));
+	FUSE_DAEMON
+		DECL_FUSE_IN(create);
+		DECL_FUSE_IN(release);
+		DECL_FUSE_IN(flush);
+
+		TESTFUSELOOKUP(dir_name, 0);
+		TESTFUSEOUT1(fuse_entry_out, ((struct fuse_entry_out) {
+			.nodeid		= 3,
+			.generation	= 1,
+			.attr.ino = 100,
+			.attr.size = 4,
+			.attr.blksize = 512,
+			.attr.mode = S_IFDIR | 0777,
+			}));
+
+		TESTFUSELOOKUP(file_name, 0);
+		TESTFUSEOUTERROR(-ENOENT);
+
+		TESTFUSEINEXT(FUSE_CREATE, create_in, strlen(file_name) + 1);
+		TESTFUSEOUT2(fuse_entry_out, ((struct fuse_entry_out) {
+			.nodeid		= 2,
+			.generation	= 1,
+			.attr.ino = 200,
+			.attr.size = 4,
+			.attr.blksize = 512,
+			.attr.mode = S_IFREG,
+			}),
+			fuse_open_out, ((struct fuse_open_out) {
+			.fh = 1,
+			.open_flags = create_in->flags,
+			}));
+
+		TESTFUSEIN(FUSE_FLUSH, flush_in);
+		TESTFUSEOUTEMPTY();
+
+		TESTFUSEIN(FUSE_RELEASE, release_in);
+		TESTFUSEOUTEMPTY();
+	FUSE_DONE
+
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	umount(mount_dir);
+	return result;
+}
+
+static int bpf_test_hidden_entries(const char *mount_dir)
+{
+	static const char * const dir_names[] = {
+		"show",
+		"hide",
+	};
+	const char *file_name = "file";
+	const char *data = "The quick brown fox jumps over the lazy dog\n";
+	int result = TEST_FAILURE;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	int fd = -1;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTSYSCALL(mkdirat(src_fd, dir_names[0], 0777));
+	TESTSYSCALL(mkdirat(src_fd, dir_names[1], 0777));
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_hidden",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TEST(fd = s_creat(s_path(s_path(s(mount_dir), s(dir_names[0])),
+				 s(file_name)),
+			  0777),
+	     fd != -1);
+	TESTSYSCALL(fallocate(fd, 0, 0, 4096));
+	TEST(write(fd, data, strlen(data)), strlen(data));
+	TESTSYSCALL(close(fd));
+	TESTEQUAL(bpf_test_trace("Create"), 0);
+
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	umount(mount_dir);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+static int bpf_test_dir(const char *mount_dir)
+{
+	const char *dir_name = "dir";
+	int result = TEST_FAILURE;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	struct stat st;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TESTSYSCALL(s_mkdir(s_path(s(mount_dir), s(dir_name)), 0777));
+	TESTEQUAL(bpf_test_trace("mkdir"), 0);
+	TESTSYSCALL(s_stat(s_path(s(ft_src), s(dir_name)), &st));
+	TESTSYSCALL(s_rmdir(s_path(s(mount_dir), s(dir_name))));
+	TESTEQUAL(s_stat(s_path(s(ft_src), s(dir_name)), &st), -1);
+	TESTEQUAL(errno, ENOENT);
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	umount(mount_dir);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+static int bpf_test_file(const char *mount_dir, bool close_first)
+{
+	const char *file_name = "real";
+	int result = TEST_FAILURE;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	int fd = -1;
+	struct stat st;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace",
+			  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TEST(fd = s_creat(s_path(s(mount_dir), s(file_name)),
+			  0777),
+	     fd != -1);
+	TESTEQUAL(bpf_test_trace("Create"), 0);
+	if (close_first) {
+		TESTSYSCALL(close(fd));
+		fd = -1;
+	}
+	TESTSYSCALL(s_stat(s_path(s(ft_src), s(file_name)), &st));
+	TESTSYSCALL(s_unlink(s_path(s(mount_dir), s(file_name))));
+	TESTEQUAL(bpf_test_trace("unlink"), 0);
+	TESTEQUAL(s_stat(s_path(s(ft_src), s(file_name)), &st), -1);
+	TESTEQUAL(errno, ENOENT);
+	if (!close_first) {
+		TESTSYSCALL(close(fd));
+		fd = -1;
+	}
+	result = TEST_SUCCESS;
+out:
+	close(fd);
+	close(fuse_dev);
+	umount(mount_dir);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+static int bpf_test_file_early_close(const char *mount_dir)
+{
+	return bpf_test_file(mount_dir, true);
+}
+
+static int bpf_test_file_late_close(const char *mount_dir)
+{
+	return bpf_test_file(mount_dir, false);
+}
+
+static int bpf_test_alter_errcode_bpf(const char *mount_dir)
+{
+	const char *dir_name = "dir";
+	int result = TEST_FAILURE;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	struct stat st;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_error",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TESTSYSCALL(s_mkdir(s_path(s(mount_dir), s(dir_name)), 0777));
+	//TESTEQUAL(bpf_test_trace("mkdir"), 0);
+	TESTSYSCALL(s_stat(s_path(s(ft_src), s(dir_name)), &st));
+	TESTEQUAL(s_mkdir(s_path(s(mount_dir), s(dir_name)), 0777), -EPERM);
+	TESTSYSCALL(s_rmdir(s_path(s(mount_dir), s(dir_name))));
+	TESTEQUAL(s_stat(s_path(s(ft_src), s(dir_name)), &st), -1);
+	TESTEQUAL(errno, ENOENT);
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	umount(mount_dir);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+static int bpf_test_alter_errcode_userspace(const char *mount_dir)
+{
+	const char *dir_name = "doesnotexist";
+	int result = TEST_FAILURE;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	int pid = -1;
+	int status;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_error",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	FUSE_ACTION
+		TESTEQUAL(s_unlink(s_path(s(mount_dir), s(dir_name))),
+		     -1);
+		TESTEQUAL(errno, ENOMEM);
+	FUSE_DAEMON
+		TESTFUSELOOKUP("doesnotexist", FUSE_POSTFILTER);
+		TESTFUSEOUTERROR(-ENOMEM);
+	FUSE_DONE
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	umount(mount_dir);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+static int bpf_test_verifier(const char *mount_dir)
+{
+	int result = TEST_FAILURE;
+	int bpf_fd1 = -1;
+	int bpf_fd2 = -1;
+	int bpf_fd3 = -1;
+
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_verify",
+				  &bpf_fd1, NULL, NULL), 0);
+	TESTEQUAL(install_elf_bpf_invalid("test_bpf.bpf", "test_verify_fail",
+				  &bpf_fd2, NULL, NULL), 0);
+	TESTEQUAL(install_elf_bpf_invalid("test_bpf.bpf", "test_verify_fail2",
+				  &bpf_fd3, NULL, NULL), 0);
+	result = TEST_SUCCESS;
+out:
+	close(bpf_fd1);
+	close(bpf_fd2);
+	close(bpf_fd3);
+	return result;
+}
+
+static int bpf_test_verifier_out_args(const char *mount_dir)
+{
+	int result = TEST_FAILURE;
+	int bpf_fd1 = -1;
+	int bpf_fd2 = -1;
+
+	TESTEQUAL(install_elf_bpf_invalid("test_bpf.bpf", "test_verify_fail3",
+				  &bpf_fd1, NULL, NULL), 0);
+	TESTEQUAL(install_elf_bpf_invalid("test_bpf.bpf", "test_verify_fail4",
+				  &bpf_fd2, NULL, NULL), 0);
+	result = TEST_SUCCESS;
+out:
+	close(bpf_fd1);
+	close(bpf_fd2);
+	return result;
+}
+
+static int bpf_test_verifier_packet_invalidation(const char *mount_dir)
+{
+	int result = TEST_FAILURE;
+	int bpf_fd1 = -1;
+	int bpf_fd2 = -1;
+
+	TESTEQUAL(install_elf_bpf_invalid("test_bpf.bpf", "test_verify_fail5",
+				  &bpf_fd1, NULL, NULL), 0);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_verify5",
+				  &bpf_fd2, NULL, NULL), 0);
+	result = TEST_SUCCESS;
+out:
+	close(bpf_fd1);
+	close(bpf_fd2);
+	return result;
+}
+
+static int bpf_test_verifier_nonsense_read(const char *mount_dir)
+{
+	int result = TEST_FAILURE;
+	int bpf_fd1 = -1;
+
+	TESTEQUAL(install_elf_bpf_invalid("test_bpf.bpf", "test_verify_fail6",
+				  &bpf_fd1, NULL, NULL), 0);
+	result = TEST_SUCCESS;
+out:
+	close(bpf_fd1);
+	return result;
+}
+
+
+static int bpf_test_mknod(const char *mount_dir)
+{
+	const char *file_name = "real";
+	int result = TEST_FAILURE;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	struct stat st;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TESTSYSCALL(s_mkfifo(s_path(s(mount_dir), s(file_name)), 0777));
+	TESTEQUAL(bpf_test_trace("mknod"), 0);
+	TESTSYSCALL(s_stat(s_path(s(ft_src), s(file_name)), &st));
+	TESTSYSCALL(s_unlink(s_path(s(mount_dir), s(file_name))));
+	TESTEQUAL(bpf_test_trace("unlink"), 0);
+	TESTEQUAL(s_stat(s_path(s(ft_src), s(file_name)), &st), -1);
+	TESTEQUAL(errno, ENOENT);
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	umount(mount_dir);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+static int bpf_test_largedir(const char *mount_dir)
+{
+	const char *show = "show";
+	const int files = 1000;
+
+	int result = TEST_FAILURE;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	struct map_relocation *map_relocations = NULL;
+	size_t map_count = 0;
+	int pid = -1;
+	int status;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(install_elf_bpf("fd_bpf.bpf", "test_daemon",
+			  &bpf_fd, &map_relocations, &map_count), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	FUSE_ACTION
+		int i;
+		int fd;
+		DIR *dir = NULL;
+		struct dirent *dirent;
+
+		TESTSYSCALL(s_mkdir(s_path(s(mount_dir), s(show)), 0777));
+		for (i = 0; i < files; ++i) {
+			char filename[NAME_MAX];
+
+			sprintf(filename, "%d", i);
+			TEST(fd = s_creat(s_path(s_path(s(mount_dir), s(show)),
+						 s(filename)), 0777), fd != -1);
+			TESTSYSCALL(close(fd));
+		}
+
+		TEST(dir = s_opendir(s_path(s(mount_dir), s(show))), dir);
+		for (dirent = readdir(dir); dirent; dirent = readdir(dir))
+			;
+		closedir(dir);
+	FUSE_DAEMON
+		int i;
+
+		for (i = 0; i < files + 2; ++i) {
+			TESTFUSELOOKUP(show, FUSE_PREFILTER);
+			TESTFUSEOUTREAD(show, 5);
+		}
+	FUSE_DONE
+
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	umount(mount_dir);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+static int bpf_test_link(const char *mount_dir)
+{
+	const char *file_name = "real";
+	const char *link_name = "partial";
+	int result = TEST_FAILURE;
+	int fd = -1;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	struct stat st;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace", &bpf_fd, NULL,
+				  NULL),
+		  0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TEST(fd = s_creat(s_path(s(mount_dir), s(file_name)), 0777), fd != -1);
+	TESTEQUAL(bpf_test_trace("Create"), 0);
+	TESTSYSCALL(s_stat(s_path(s(ft_src), s(file_name)), &st));
+
+	TESTSYSCALL(s_link(s_path(s(mount_dir), s(file_name)),
+			   s_path(s(mount_dir), s(link_name))));
+
+	TESTEQUAL(bpf_test_trace("link"), 0);
+	TESTSYSCALL(s_stat(s_path(s(ft_src), s(link_name)), &st));
+
+	TESTSYSCALL(s_unlink(s_path(s(mount_dir), s(link_name))));
+	TESTEQUAL(bpf_test_trace("unlink"), 0);
+	TESTEQUAL(s_stat(s_path(s(ft_src), s(link_name)), &st), -1);
+	TESTEQUAL(errno, ENOENT);
+
+	TESTSYSCALL(s_unlink(s_path(s(mount_dir), s(file_name))));
+	TESTEQUAL(bpf_test_trace("unlink"), 0);
+	TESTEQUAL(s_stat(s_path(s(ft_src), s(file_name)), &st), -1);
+	TESTEQUAL(errno, ENOENT);
+
+	result = TEST_SUCCESS;
+out:
+	close(fd);
+	close(fuse_dev);
+	umount(mount_dir);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+static int bpf_test_symlink(const char *mount_dir)
+{
+	const char *test_name = "real";
+	const char *symlink_name = "partial";
+	const char *test_data = "Weebles wobble but they don't fall down";
+	int result = TEST_FAILURE;
+	int bpf_fd = -1;
+	int src_fd = -1;
+	int fuse_dev = -1;
+	int fd = -1;
+	char read_buffer[256] = {};
+	ssize_t bytes_read;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TEST(fd = openat(src_fd, test_name, O_CREAT | O_RDWR | O_CLOEXEC, 0777),
+	     fd != -1);
+	TESTEQUAL(write(fd, test_data, strlen(test_data)), strlen(test_data));
+	TESTSYSCALL(close(fd));
+	fd = -1;
+
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TESTSYSCALL(s_symlink(s_path(s(mount_dir), s(test_name)),
+				   s_path(s(mount_dir), s(symlink_name))));
+	TESTEQUAL(bpf_test_trace("symlink"), 0);
+
+	TESTERR(fd = s_open(s_path(s(mount_dir), s(symlink_name)), O_RDONLY | O_CLOEXEC), fd != -1);
+	bytes_read = read(fd, read_buffer, strlen(test_data));
+	TESTEQUAL(bpf_test_trace("readlink"), 0);
+	TESTEQUAL(bytes_read, strlen(test_data));
+	TESTEQUAL(strcmp(test_data, read_buffer), 0);
+
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	close(fd);
+	umount(mount_dir);
+	close(src_fd);
+	close(bpf_fd);
+	return result;
+}
+
+static int bpf_test_xattr(const char *mount_dir)
+{
+	static const char file_name[] = "real";
+	static const char xattr_name[] = "user.xattr_test_name";
+	static const char xattr_value[] = "this_is_a_test";
+	const size_t xattr_size = sizeof(xattr_value);
+	char xattr_value_ret[256];
+	ssize_t xattr_size_ret;
+	int result = TEST_FAILURE;
+	int fd = -1;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	struct stat st;
+
+	memset(xattr_value_ret, '\0', sizeof(xattr_value_ret));
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace", &bpf_fd, NULL,
+				  NULL),
+		  0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TEST(fd = s_creat(s_path(s(mount_dir), s(file_name)), 0777), fd != -1);
+	TESTEQUAL(bpf_test_trace("Create"), 0);
+	TESTSYSCALL(close(fd));
+
+	TESTSYSCALL(s_stat(s_path(s(ft_src), s(file_name)), &st));
+	TEST(result = s_getxattr(s_path(s(mount_dir), s(file_name)), xattr_name,
+				 xattr_value_ret, sizeof(xattr_value_ret),
+				 &xattr_size_ret),
+	     result == -1);
+	TESTEQUAL(errno, ENODATA);
+	TESTEQUAL(bpf_test_trace("getxattr"), 0);
+
+	TESTSYSCALL(s_listxattr(s_path(s(mount_dir), s(file_name)),
+				xattr_value_ret, sizeof(xattr_value_ret),
+				&xattr_size_ret));
+	TESTEQUAL(bpf_test_trace("listxattr"), 0);
+	TESTEQUAL(xattr_size_ret, 0);
+
+	TESTSYSCALL(s_setxattr(s_path(s(mount_dir), s(file_name)), xattr_name,
+			       xattr_value, xattr_size, 0));
+	TESTEQUAL(bpf_test_trace("setxattr"), 0);
+
+	TESTSYSCALL(s_listxattr(s_path(s(mount_dir), s(file_name)),
+				xattr_value_ret, sizeof(xattr_value_ret),
+				&xattr_size_ret));
+	TESTEQUAL(bpf_test_trace("listxattr"), 0);
+	TESTEQUAL(xattr_size_ret, sizeof(xattr_name));
+	TESTEQUAL(strcmp(xattr_name, xattr_value_ret), 0);
+
+	TESTSYSCALL(s_getxattr(s_path(s(mount_dir), s(file_name)), xattr_name,
+			       xattr_value_ret, sizeof(xattr_value_ret),
+			       &xattr_size_ret));
+	TESTEQUAL(bpf_test_trace("getxattr"), 0);
+	TESTEQUAL(xattr_size, xattr_size_ret);
+	TESTEQUAL(strcmp(xattr_value, xattr_value_ret), 0);
+
+	TESTSYSCALL(s_removexattr(s_path(s(mount_dir), s(file_name)), xattr_name));
+	TESTEQUAL(bpf_test_trace("removexattr"), 0);
+
+	TESTEQUAL(s_getxattr(s_path(s(mount_dir), s(file_name)), xattr_name,
+			       xattr_value_ret, sizeof(xattr_value_ret),
+			       &xattr_size_ret), -1);
+	TESTEQUAL(errno, ENODATA);
+
+	TESTSYSCALL(s_unlink(s_path(s(mount_dir), s(file_name))));
+	TESTEQUAL(bpf_test_trace("unlink"), 0);
+	TESTEQUAL(s_stat(s_path(s(ft_src), s(file_name)), &st), -1);
+	TESTEQUAL(errno, ENOENT);
+
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	umount(mount_dir);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+static int bpf_test_set_backing(const char *mount_dir)
+{
+	const char *backing_name = "backing";
+	const char *test_data = "data";
+	const char *test_name = "test";
+
+	int result = TEST_FAILURE;
+	int fuse_dev = -1;
+	int fd = -1;
+	int pid = -1;
+	int status;
+
+	TESTEQUAL(mount_fuse_no_init(mount_dir, -1, -1, &fuse_dev), 0);
+	FUSE_ACTION
+		char data[256] = {0};
+
+		TESTERR(fd = s_open(s_path(s(mount_dir), s(test_name)),
+				    O_RDONLY | O_CLOEXEC), fd != -1);
+		TESTEQUAL(read(fd, data, strlen(test_data)), strlen(test_data));
+		TESTCOND(!strcmp(data, test_data));
+		TESTSYSCALL(close(fd));
+		fd = -1;
+		TESTSYSCALL(umount(mount_dir));
+	FUSE_DAEMON
+		int bpf_fd  = -1;
+		int backing_fd = -1;
+
+		TESTERR(backing_fd = s_creat(s_path(s(ft_src), s(backing_name)), 0777),
+			backing_fd != -1);
+		TESTEQUAL(write(backing_fd, test_data, strlen(test_data)),
+			  strlen(test_data));
+		TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_simple",
+					  &bpf_fd, NULL, NULL), 0);
+
+		TESTFUSEINIT();
+		TESTFUSELOOKUP(test_name, 0);
+		TESTFUSEOUT2(fuse_entry_out, ((struct fuse_entry_out) {0}),
+			     fuse_entry_bpf_out, ((struct fuse_entry_bpf_out) {
+			.backing_action = FUSE_ACTION_REPLACE,
+			.backing_fd = backing_fd,
+			.bpf_action = FUSE_ACTION_REPLACE,
+			.bpf_fd = bpf_fd,
+			}));
+		read(fuse_dev, bytes_in, sizeof(bytes_in));
+		TESTSYSCALL(close(bpf_fd));
+		TESTSYSCALL(close(backing_fd));
+	FUSE_DONE
+
+	result = TEST_SUCCESS;
+out:
+	if (!pid)
+		exit(TEST_FAILURE);
+	close(fuse_dev);
+	close(fd);
+	umount(mount_dir);
+	return result;
+}
+
+static int bpf_test_set_backing_folder(const char *mount_dir)
+{
+	const char *backing_name = "backingdir";
+	const char *test_name = "testdir";
+	const char *names[] = {"file", ".", ".."};
+
+	int result = TEST_FAILURE;
+	int fuse_dev = -1;
+	int fd = -1;
+	int pid = -1;
+	int status;
+
+	TESTEQUAL(mount_fuse_no_init(mount_dir, -1, -1, &fuse_dev), 0);
+	FUSE_ACTION
+		DIR *dir = NULL;
+		struct dirent *dirent;
+		int i, j;
+
+		TEST(dir = s_opendir(s_path(s(mount_dir), s(test_name))), dir);
+
+		for (i = 0; i < ARRAY_SIZE(names); ++i) {
+			TEST(dirent = readdir(dir), dirent);
+
+			for (j = 0; j < ARRAY_SIZE(names); ++j)
+				if (names[j] &&
+				    strcmp(names[j], dirent->d_name) == 0) {
+					names[j] = NULL;
+					break;
+				}
+			TESTNE(j, ARRAY_SIZE(names));
+		}
+		TEST(dirent = readdir(dir), dirent == NULL);
+		TESTSYSCALL(closedir(dir));
+		dir = NULL;
+		TESTEQUAL(bpf_test_trace("prefilter opcode: 28"), 0);
+		TESTSYSCALL(umount(mount_dir));
+	FUSE_DAEMON
+		int bpf_fd  = -1;
+		int backing_fd = -1;
+
+		TESTSYSCALL(s_mkdir(s_path(s(ft_src), s(backing_name)), 0777));
+		TESTERR(backing_fd = s_open(s_path(s(ft_src), s(backing_name)), O_RDONLY | O_CLOEXEC),
+					backing_fd != -1);
+		TESTSYSCALL(s_mkdir(s_pathn(3, s(ft_src), s(backing_name), s(names[0])), 0777));
+		TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_simple",
+					  &bpf_fd, NULL, NULL), 0);
+
+		TESTFUSEINIT();
+		TESTFUSELOOKUP(test_name, 0);
+
+		TESTFUSEOUT2(fuse_entry_out, ((struct fuse_entry_out) {0}),
+			     fuse_entry_bpf_out, ((struct fuse_entry_bpf_out) {
+			.backing_action = FUSE_ACTION_REPLACE,
+			.backing_fd = backing_fd,
+			.bpf_action = FUSE_ACTION_REPLACE,
+			.bpf_fd = bpf_fd,
+			}));
+		TESTSYSCALL(close(bpf_fd));
+		TESTSYSCALL(close(backing_fd));
+	FUSE_DONE
+
+	result = TEST_SUCCESS;
+out:
+	if (!pid)
+		exit(TEST_FAILURE);
+	close(fuse_dev);
+	close(fd);
+	umount(mount_dir);
+	return result;
+}
+
+static int bpf_test_remove_backing(const char *mount_dir)
+{
+	const char *folder1 = "folder1";
+	const char *folder2 = "folder2";
+	const char *file = "file1";
+	const char *contents1 = "contents1";
+	const char *contents2 = "contents2";
+
+	int result = TEST_FAILURE;
+	int fuse_dev = -1;
+	int fd = -1;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int pid = -1;
+	int status;
+	char data[256] = {0};
+
+	/*
+	 * Create folder1/file
+	 *        folder2/file
+	 *
+	 * test will install bpf into mount
+	 * bpf will postfilter root lookup to daemon
+	 * daemon will remove bpf and redirect opens on folder1 to folder2
+	 * test will open folder1/file which will be redirected to folder2
+	 * test will check no traces for file, and contents are folder2/file
+	 */
+	TESTEQUAL(bpf_clear_trace(), 0);
+	TESTSYSCALL(s_mkdir(s_path(s(ft_src), s(folder1)), 0777));
+	TEST(fd = s_creat(s_pathn(3, s(ft_src), s(folder1), s(file)), 0777),
+	     fd != -1);
+	TESTEQUAL(write(fd, contents1, strlen(contents1)), strlen(contents1));
+	TESTSYSCALL(close(fd));
+	TESTSYSCALL(s_mkdir(s_path(s(ft_src), s(folder2)), 0777));
+	TEST(fd = s_creat(s_pathn(3, s(ft_src), s(folder2), s(file)), 0777),
+	     fd != -1);
+	TESTEQUAL(write(fd, contents2, strlen(contents2)), strlen(contents2));
+	TESTSYSCALL(close(fd));
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_passthrough", &bpf_fd,
+				  NULL, NULL), 0);
+	TESTEQUAL(mount_fuse_no_init(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	FUSE_ACTION
+		TESTERR(fd = s_open(s_pathn(3, s(mount_dir), s(folder1),
+					    s(file)),
+				    O_RDONLY | O_CLOEXEC), fd != -1);
+		TESTEQUAL(read(fd, data, sizeof(data)), strlen(contents2));
+		TESTCOND(!strcmp(data, contents2));
+		TESTEQUAL(bpf_test_no_trace("file"), 0);
+		TESTSYSCALL(close(fd));
+		fd = -1;
+		TESTSYSCALL(umount(mount_dir));
+	FUSE_DAEMON
+		struct {
+			char name[8];
+			struct fuse_entry_out feo;
+			struct fuse_entry_bpf_out febo;
+		} __attribute__((packed)) in;
+		int backing_fd = -1;
+
+		TESTFUSEINIT();
+		TESTFUSEIN(FUSE_LOOKUP | FUSE_POSTFILTER, &in);
+		TEST(backing_fd = s_open(s_path(s(ft_src), s(folder2)),
+				 O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+		     backing_fd != -1);
+		TESTFUSEOUT2(fuse_entry_out, ((struct fuse_entry_out) {0}),
+			     fuse_entry_bpf_out, ((struct fuse_entry_bpf_out) {
+			.bpf_action = FUSE_ACTION_REMOVE,
+			.backing_action = FUSE_ACTION_REPLACE,
+			.backing_fd = backing_fd,
+			}));
+
+		while (read(fuse_dev, bytes_in, sizeof(bytes_in)) != -1)
+			;
+		TESTSYSCALL(close(backing_fd));
+	FUSE_DONE
+
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	close(fd);
+	close(src_fd);
+	close(bpf_fd);
+	umount(mount_dir);
+	return result;
+}
+
+static int bpf_test_dir_rename(const char *mount_dir)
+{
+	const char *dir_name = "dir";
+	const char *dir_name2 = "dir2";
+	int result = TEST_FAILURE;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	struct stat st;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TESTSYSCALL(s_mkdir(s_path(s(mount_dir), s(dir_name)), 0777));
+	TESTEQUAL(bpf_test_trace("mkdir"), 0);
+	TESTSYSCALL(s_stat(s_path(s(ft_src), s(dir_name)), &st));
+	TESTSYSCALL(s_rename(s_path(s(mount_dir), s(dir_name)),
+			     s_path(s(mount_dir), s(dir_name2))));
+	TESTEQUAL(s_stat(s_path(s(ft_src), s(dir_name)), &st), -1);
+	TESTEQUAL(errno, ENOENT);
+	TESTSYSCALL(s_stat(s_path(s(ft_src), s(dir_name2)), &st));
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	umount(mount_dir);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+static int bpf_test_file_rename(const char *mount_dir)
+{
+	const char *dir = "dir";
+	const char *file1 = "file1";
+	const char *file2 = "file2";
+	int result = TEST_FAILURE;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	int fd = -1;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TESTSYSCALL(s_mkdir(s_path(s(mount_dir), s(dir)), 0777));
+	TEST(fd = s_creat(s_pathn(3, s(mount_dir), s(dir), s(file1)), 0777),
+	     fd != -1);
+	TESTSYSCALL(s_rename(s_pathn(3, s(mount_dir), s(dir), s(file1)),
+			     s_pathn(3, s(mount_dir), s(dir), s(file2))));
+	result = TEST_SUCCESS;
+out:
+	close(fd);
+	umount(mount_dir);
+	close(fuse_dev);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+static int mmap_test(const char *mount_dir)
+{
+	const char *file = "file";
+	int result = TEST_FAILURE;
+	int src_fd = -1;
+	int fuse_dev = -1;
+	int fd = -1;
+	char *addr = NULL;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(mount_fuse(mount_dir, -1, src_fd, &fuse_dev), 0);
+	TEST(fd = s_open(s_path(s(mount_dir), s(file)),
+			 O_CREAT | O_RDWR | O_CLOEXEC, 0777),
+	     fd != -1);
+	TESTSYSCALL(fallocate(fd, 0, 4096, SEEK_CUR));
+	TEST(addr = mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0),
+	     addr != (void *) -1);
+	memset(addr, 'a', 4096);
+
+	result = TEST_SUCCESS;
+out:
+	munmap(addr, 4096);
+	close(fd);
+	umount(mount_dir);
+	close(fuse_dev);
+	close(src_fd);
+	return result;
+}
+
+static int readdir_perms_test(const char *mount_dir)
+{
+	int result = TEST_FAILURE;
+	struct __user_cap_header_struct uchs = { _LINUX_CAPABILITY_VERSION_3 };
+	struct __user_cap_data_struct ucds[2];
+	int src_fd = -1;
+	int fuse_dev = -1;
+	DIR *dir = NULL;
+
+	/* Must remove capabilities for this test. */
+	TESTSYSCALL(syscall(SYS_capget, &uchs, ucds));
+	ucds[0].effective &= ~(1 << CAP_DAC_OVERRIDE | 1 << CAP_DAC_READ_SEARCH);
+	TESTSYSCALL(syscall(SYS_capset, &uchs, ucds));
+
+	/* This is what we are testing in fuseland. First test without fuse, */
+	TESTSYSCALL(mkdir("test", 0111));
+	TEST(dir = opendir("test"), dir == NULL);
+	closedir(dir);
+	dir = NULL;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(mount_fuse(mount_dir, -1, src_fd, &fuse_dev), 0);
+
+	TESTSYSCALL(s_mkdir(s_path(s(mount_dir), s("test")), 0111));
+	TEST(dir = s_opendir(s_path(s(mount_dir), s("test"))), dir == NULL);
+
+	result = TEST_SUCCESS;
+out:
+	ucds[0].effective |= 1 << CAP_DAC_OVERRIDE | 1 << CAP_DAC_READ_SEARCH;
+	syscall(SYS_capset, &uchs, ucds);
+
+	closedir(dir);
+	s_rmdir(s_path(s(mount_dir), s("test")));
+	umount(mount_dir);
+	close(fuse_dev);
+	close(src_fd);
+	rmdir("test");
+	return result;
+}
+
+static int bpf_test_statfs(const char *mount_dir)
+{
+	int result = TEST_FAILURE;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	int fd = -1;
+	struct statfs st;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TESTSYSCALL(s_statfs(s(mount_dir), &st));
+	TESTEQUAL(bpf_test_trace("statfs"), 0);
+	TESTEQUAL(st.f_type, 0x65735546);
+	result = TEST_SUCCESS;
+out:
+	close(fd);
+	umount(mount_dir);
+	close(fuse_dev);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+static int bpf_test_lseek(const char *mount_dir)
+{
+	const char *file = "real";
+	const char *test_data = "data";
+	int result = TEST_FAILURE;
+	int src_fd = -1;
+	int bpf_fd = -1;
+	int fuse_dev = -1;
+	int fd = -1;
+
+	TEST(src_fd = open(ft_src, O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+	     src_fd != -1);
+	TEST(fd = openat(src_fd, file, O_CREAT | O_RDWR | O_CLOEXEC, 0777),
+	     fd != -1);
+	TESTEQUAL(write(fd, test_data, strlen(test_data)), strlen(test_data));
+	TESTSYSCALL(close(fd));
+	fd = -1;
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_trace",
+				  &bpf_fd, NULL, NULL), 0);
+	TESTEQUAL(mount_fuse(mount_dir, bpf_fd, src_fd, &fuse_dev), 0);
+
+	TEST(fd = s_open(s_path(s(mount_dir), s(file)), O_RDONLY | O_CLOEXEC),
+	     fd != -1);
+	TESTEQUAL(lseek(fd, 3, SEEK_SET), 3);
+	TESTEQUAL(bpf_test_trace("lseek"), 0);
+	TESTEQUAL(lseek(fd, 5, SEEK_END), 9);
+	TESTEQUAL(bpf_test_trace("lseek"), 0);
+	TESTEQUAL(lseek(fd, 1, SEEK_CUR), 10);
+	TESTEQUAL(bpf_test_trace("lseek"), 0);
+	TESTEQUAL(lseek(fd, 1, SEEK_DATA), 1);
+	TESTEQUAL(bpf_test_trace("lseek"), 0);
+	result = TEST_SUCCESS;
+out:
+	close(fd);
+	umount(mount_dir);
+	close(fuse_dev);
+	close(bpf_fd);
+	close(src_fd);
+	return result;
+}
+
+/*
+ * State:
+ * Original: dst/folder1/content.txt
+ *                  ^
+ *                  |
+ *                  |
+ * Backing:  src/folder1/content.txt
+ *
+ * Step 1:  open(folder1) - set backing to src/folder1
+ * Check 1: cat(content.txt) - check not receiving call on the fuse daemon
+ *                             and content is the same
+ * Step 2:  readdirplus(dst)
+ * Check 2: cat(content.txt) - check not receiving call on the fuse daemon
+ *                             and content is the same
+ */
+static int bpf_test_readdirplus_not_overriding_backing(const char *mount_dir)
+{
+	const char *folder1 = "folder1";
+	const char *content_file = "content.txt";
+	const char *content = "hello world";
+
+	int result = TEST_FAILURE;
+	int fuse_dev = -1;
+	int src_fd = -1;
+	int content_fd = -1;
+	int pid = -1;
+	int status;
+
+	TESTSYSCALL(s_mkdir(s_path(s(ft_src), s(folder1)), 0777));
+	TEST(content_fd = s_creat(s_pathn(3, s(ft_src), s(folder1), s(content_file)), 0777),
+		content_fd != -1);
+	TESTEQUAL(write(content_fd, content, strlen(content)), strlen(content));
+	TESTEQUAL(mount_fuse_no_init(mount_dir, -1, -1, &fuse_dev), 0);
+
+	FUSE_ACTION
+		DIR *open_mount_dir = NULL;
+		struct dirent *mount_dirent;
+		int dst_folder1_fd = -1;
+		int dst_content_fd = -1;
+		int dst_content_read_size = -1;
+		char content_buffer[12];
+
+		// Step 1: Lookup folder1
+		TESTERR(dst_folder1_fd = s_open(s_path(s(mount_dir), s(folder1)),
+			O_RDONLY | O_CLOEXEC), dst_folder1_fd != -1);
+
+		// Check 1: Read content file (backed)
+		TESTERR(dst_content_fd =
+			s_open(s_pathn(3, s(mount_dir), s(folder1), s(content_file)),
+			O_RDONLY | O_CLOEXEC), dst_content_fd != -1);
+
+		TEST(dst_content_read_size =
+			read(dst_content_fd, content_buffer, strlen(content)),
+			dst_content_read_size == strlen(content) &&
+			strcmp(content, content_buffer) == 0);
+
+		TESTSYSCALL(close(dst_content_fd));
+		dst_content_fd = -1;
+		TESTSYSCALL(close(dst_folder1_fd));
+		dst_folder1_fd = -1;
+		memset(content_buffer, 0, strlen(content));
+
+		// Step 2: readdir folder 1
+		TEST(open_mount_dir = s_opendir(s(mount_dir)),
+			open_mount_dir != NULL);
+		TEST(mount_dirent = readdir(open_mount_dir), mount_dirent != NULL);
+		TESTSYSCALL(closedir(open_mount_dir));
+		open_mount_dir = NULL;
+
+		// Check 2: Read content file again (must be backed)
+		TESTERR(dst_content_fd =
+			s_open(s_pathn(3, s(mount_dir), s(folder1), s(content_file)),
+			O_RDONLY | O_CLOEXEC), dst_content_fd != -1);
+
+		TEST(dst_content_read_size =
+			read(dst_content_fd, content_buffer, strlen(content)),
+			dst_content_read_size == strlen(content) &&
+			strcmp(content, content_buffer) == 0);
+
+		TESTSYSCALL(close(dst_content_fd));
+		dst_content_fd = -1;
+	FUSE_DAEMON
+		size_t read_size = 0;
+		struct fuse_in_header *in_header = (struct fuse_in_header *)bytes_in;
+		struct fuse_read_out *read_out = NULL;
+		struct fuse_attr attr = {};
+		int backing_fd = -1;
+		DECL_FUSE_IN(open);
+		DECL_FUSE_IN(getattr);
+
+		TESTFUSEINITFLAGS(FUSE_DO_READDIRPLUS | FUSE_READDIRPLUS_AUTO);
+
+		// Step 1: Lookup folder 1 with backing
+		TESTFUSELOOKUP(folder1, 0);
+		TESTSYSCALL(s_fuse_attr(s_path(s(ft_src), s(folder1)), &attr));
+		TEST(backing_fd = s_open(s_path(s(ft_src), s(folder1)),
+					 O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+		     backing_fd != -1);
+		TESTFUSEOUT2(fuse_entry_out, ((struct fuse_entry_out) {
+				.nodeid = attr.ino,
+				.generation = 0,
+				.entry_valid = UINT64_MAX,
+				.attr_valid = UINT64_MAX,
+				.entry_valid_nsec = UINT32_MAX,
+				.attr_valid_nsec = UINT32_MAX,
+				.attr = attr,
+			     }), fuse_entry_bpf_out, ((struct fuse_entry_bpf_out) {
+				.backing_action = FUSE_ACTION_REPLACE,
+				.backing_fd = backing_fd,
+			     }));
+		TESTSYSCALL(close(backing_fd));
+
+		// Step 2: Open root dir
+		TESTFUSEIN(FUSE_OPENDIR, open_in);
+		TESTFUSEOUT1(fuse_open_out, ((struct fuse_open_out) {
+			.fh = 100,
+			.open_flags = open_in->flags
+		}));
+
+		// Step 2: Handle getattr
+		TESTFUSEIN(FUSE_GETATTR, getattr_in);
+		TESTSYSCALL(s_fuse_attr(s(ft_src), &attr));
+		TESTFUSEOUT1(fuse_attr_out, ((struct fuse_attr_out) {
+			.attr_valid = UINT64_MAX,
+			.attr_valid_nsec = UINT32_MAX,
+			.attr = attr
+		}));
+
+		// Step 2: Handle readdirplus
+		read_size = read(fuse_dev, bytes_in, sizeof(bytes_in));
+		TESTEQUAL(in_header->opcode, FUSE_READDIRPLUS);
+
+		struct fuse_direntplus *dirent_plus =
+			(struct fuse_direntplus *) (bytes_in + read_size);
+		struct fuse_dirent dirent;
+		struct fuse_entry_out entry_out;
+
+		read_out = (struct fuse_read_out *) (bytes_in +
+					sizeof(*in_header) +
+					sizeof(struct fuse_read_in));
+
+		TESTSYSCALL(s_fuse_attr(s_path(s(ft_src), s(folder1)), &attr));
+
+		dirent = (struct fuse_dirent) {
+			.ino = attr.ino,
+			.off = 1,
+			.namelen = strlen(folder1),
+			.type = DT_REG
+		};
+		entry_out = (struct fuse_entry_out) {
+			.nodeid = attr.ino,
+			.generation = 0,
+			.entry_valid = UINT64_MAX,
+			.attr_valid = UINT64_MAX,
+			.entry_valid_nsec = UINT32_MAX,
+			.attr_valid_nsec = UINT32_MAX,
+			.attr = attr
+		};
+		*dirent_plus = (struct fuse_direntplus) {
+			.dirent = dirent,
+			.entry_out = entry_out
+		};
+
+		strcpy((char *)(bytes_in + read_size + sizeof(*dirent_plus)), folder1);
+		read_size += FUSE_DIRENT_ALIGN(sizeof(*dirent_plus) + strlen(folder1) +
+					1);
+		TESTFUSEDIROUTREAD(read_out,
+				bytes_in +
+				sizeof(struct fuse_in_header) +
+				sizeof(struct fuse_read_in) +
+				sizeof(struct fuse_read_out),
+				read_size - sizeof(struct fuse_in_header) -
+					sizeof(struct fuse_read_in) -
+					sizeof(struct fuse_read_out));
+	FUSE_DONE
+
+	result = TEST_SUCCESS;
+
+out:
+	close(fuse_dev);
+	close(content_fd);
+	close(src_fd);
+	umount(mount_dir);
+	return result;
+}
+
+static int bpf_test_no_readdirplus_without_nodeid(const char *mount_dir)
+{
+	const char *folder1 = "folder1";
+	const char *folder2 = "folder2";
+	int result = TEST_FAILURE;
+	int fuse_dev = -1;
+	int src_fd = -1;
+	int content_fd = -1;
+	int bpf_fd = -1;
+	int pid = -1;
+	int status;
+
+	TESTEQUAL(install_elf_bpf("test_bpf.bpf", "test_readdirplus",
+					  &bpf_fd, NULL, NULL), 0);
+	TESTSYSCALL(s_mkdir(s_path(s(ft_src), s(folder1)), 0777));
+	TESTSYSCALL(s_mkdir(s_path(s(ft_src), s(folder2)), 0777));
+	TESTEQUAL(mount_fuse_no_init(mount_dir, -1, -1, &fuse_dev), 0);
+	FUSE_ACTION
+		DIR *open_dir = NULL;
+		struct dirent *dirent;
+
+		// Folder 1: Readdir with no nodeid
+		TEST(open_dir = s_opendir(s_path(s(ft_dst), s(folder1))),
+				open_dir != NULL);
+		TEST(dirent = readdir(open_dir), dirent == NULL);
+		TESTCOND(errno == EINVAL);
+		TESTSYSCALL(closedir(open_dir));
+		open_dir = NULL;
+
+		// Folder 2: Readdir with a nodeid
+		TEST(open_dir = s_opendir(s_path(s(ft_dst), s(folder2))),
+				open_dir != NULL);
+		TEST(dirent = readdir(open_dir), dirent == NULL);
+		TESTCOND(errno == EINVAL);
+		TESTSYSCALL(closedir(open_dir));
+		open_dir = NULL;
+	FUSE_DAEMON
+		size_t read_size;
+		struct fuse_in_header *in_header = (struct fuse_in_header *)bytes_in;
+		struct fuse_attr attr = {};
+		int backing_fd = -1;
+
+		TESTFUSEINITFLAGS(FUSE_DO_READDIRPLUS | FUSE_READDIRPLUS_AUTO);
+
+		// folder 1: Set 0 as nodeid, Expect READDIR
+		TESTFUSELOOKUP(folder1, 0);
+		TEST(backing_fd = s_open(s_path(s(ft_src), s(folder1)),
+					 O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+		     backing_fd != -1);
+		TESTFUSEOUT2(fuse_entry_out, ((struct fuse_entry_out) {
+				.nodeid = 0,
+				.generation = 0,
+				.entry_valid = UINT64_MAX,
+				.attr_valid = UINT64_MAX,
+				.entry_valid_nsec = UINT32_MAX,
+				.attr_valid_nsec = UINT32_MAX,
+				.attr = attr,
+			     }), fuse_entry_bpf_out, ((struct fuse_entry_bpf_out) {
+				.backing_action = FUSE_ACTION_REPLACE,
+				.backing_fd = backing_fd,
+				.bpf_action = FUSE_ACTION_REPLACE,
+				.bpf_fd = bpf_fd,
+			     }));
+		TESTSYSCALL(close(backing_fd));
+		TEST(read_size = read(fuse_dev, bytes_in, sizeof(bytes_in)), read_size > 0);
+		TESTEQUAL(in_header->opcode, FUSE_READDIR);
+		TESTFUSEOUTERROR(-EINVAL);
+
+		// folder 2: Set 10 as nodeid, Expect READDIRPLUS
+		TESTFUSELOOKUP(folder2, 0);
+		TEST(backing_fd = s_open(s_path(s(ft_src), s(folder2)),
+					 O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+		     backing_fd != -1);
+		TESTFUSEOUT2(fuse_entry_out, ((struct fuse_entry_out) {
+				.nodeid = 10,
+				.generation = 0,
+				.entry_valid = UINT64_MAX,
+				.attr_valid = UINT64_MAX,
+				.entry_valid_nsec = UINT32_MAX,
+				.attr_valid_nsec = UINT32_MAX,
+				.attr = attr,
+			     }), fuse_entry_bpf_out, ((struct fuse_entry_bpf_out) {
+				.backing_action = FUSE_ACTION_REPLACE,
+				.backing_fd = backing_fd,
+				.bpf_action = FUSE_ACTION_REPLACE,
+				.bpf_fd = bpf_fd,
+			     }));
+		TESTSYSCALL(close(backing_fd));
+		TEST(read_size = read(fuse_dev, bytes_in, sizeof(bytes_in)), read_size > 0);
+		TESTEQUAL(in_header->opcode, FUSE_READDIRPLUS);
+		TESTFUSEOUTERROR(-EINVAL);
+	FUSE_DONE
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	close(content_fd);
+	close(src_fd);
+	close(bpf_fd);
+	umount(mount_dir);
+	return result;
+}
+
+/*
+ * State:
+ * Original: dst/folder1/content.txt
+ *                  ^
+ *                  |
+ *                  |
+ * Backing:  src/folder1/content.txt
+ *
+ * Step 1:  open(folder1) - lookup folder1 with entry_timeout set to 0
+ * Step 2:  open(folder1) - lookup folder1 again to trigger revalidate wich will
+ *                          set backing fd
+ *
+ * Check 1: cat(content.txt) - check not receiving call on the fuse daemon
+ *                             and content is the same
+ */
+static int bpf_test_revalidate_handle_backing_fd(const char *mount_dir)
+{
+	const char *folder1 = "folder1";
+	const char *content_file = "content.txt";
+	const char *content = "hello world";
+	int result = TEST_FAILURE;
+	int fuse_dev = -1;
+	int src_fd = -1;
+	int content_fd = -1;
+	int pid = -1;
+	int status;
+	TESTSYSCALL(s_mkdir(s_path(s(ft_src), s(folder1)), 0777));
+	TEST(content_fd = s_creat(s_pathn(3, s(ft_src), s(folder1), s(content_file)), 0777),
+		content_fd != -1);
+	TESTEQUAL(write(content_fd, content, strlen(content)), strlen(content));
+	TESTSYSCALL(close(content_fd));
+	content_fd = -1;
+	TESTEQUAL(mount_fuse_no_init(mount_dir, -1, -1, &fuse_dev), 0);
+	FUSE_ACTION
+		int dst_folder1_fd = -1;
+		int dst_content_fd = -1;
+		int dst_content_read_size = -1;
+		char content_buffer[9] = {0};
+		// Step 1: Lookup folder1
+		TESTERR(dst_folder1_fd = s_open(s_path(s(mount_dir), s(folder1)),
+			O_RDONLY | O_CLOEXEC), dst_folder1_fd != -1);
+		TESTSYSCALL(close(dst_folder1_fd));
+		dst_folder1_fd = -1;
+		// Step 2: Lookup folder1 again
+		TESTERR(dst_folder1_fd = s_open(s_path(s(mount_dir), s(folder1)),
+			O_RDONLY | O_CLOEXEC), dst_folder1_fd != -1);
+		TESTSYSCALL(close(dst_folder1_fd));
+		dst_folder1_fd = -1;
+		// Check 1: Read content file (must be backed)
+		TESTERR(dst_content_fd =
+			s_open(s_pathn(3, s(mount_dir), s(folder1), s(content_file)),
+			O_RDONLY | O_CLOEXEC), dst_content_fd != -1);
+		TEST(dst_content_read_size =
+			read(dst_content_fd, content_buffer, strlen(content)),
+			dst_content_read_size == strlen(content) &&
+			strcmp(content, content_buffer) == 0);
+		TESTSYSCALL(close(dst_content_fd));
+		dst_content_fd = -1;
+	FUSE_DAEMON
+		struct fuse_attr attr = {};
+		int backing_fd = -1;
+		TESTFUSEINITFLAGS(FUSE_DO_READDIRPLUS | FUSE_READDIRPLUS_AUTO);
+		// Step 1: Lookup folder1 set entry_timeout to 0 to trigger
+		// revalidate later
+		TESTFUSELOOKUP(folder1, 0);
+		TESTSYSCALL(s_fuse_attr(s_path(s(ft_src), s(folder1)), &attr));
+		TEST(backing_fd = s_open(s_path(s(ft_src), s(folder1)),
+					 O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+		     backing_fd != -1);
+		TESTFUSEOUT2(fuse_entry_out, ((struct fuse_entry_out) {
+				.nodeid = attr.ino,
+				.generation = 0,
+				.entry_valid = 0,
+				.attr_valid = UINT64_MAX,
+				.entry_valid_nsec = 0,
+				.attr_valid_nsec = UINT32_MAX,
+				.attr = attr,
+			     }), fuse_entry_bpf_out, ((struct fuse_entry_bpf_out) {
+				.backing_action = FUSE_ACTION_REPLACE,
+				.backing_fd = backing_fd,
+			     }));
+		TESTSYSCALL(close(backing_fd));
+		// Step 1: Lookup folder1 as a reaction to revalidate call
+		// This attempts to change the backing node, which is not allowed on revalidate
+		TESTFUSELOOKUP(folder1, 0);
+		TESTSYSCALL(s_fuse_attr(s_path(s(ft_src), s(folder1)), &attr));
+		TEST(backing_fd = s_open(s_path(s(ft_src), s(folder1)),
+					 O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+		     backing_fd != -1);
+		TESTFUSEOUT2(fuse_entry_out, ((struct fuse_entry_out) {
+				.nodeid = attr.ino,
+				.generation = 0,
+				.entry_valid = UINT64_MAX,
+				.attr_valid = UINT64_MAX,
+				.entry_valid_nsec = UINT32_MAX,
+				.attr_valid_nsec = UINT32_MAX,
+				.attr = attr,
+			     }), fuse_entry_bpf_out, ((struct fuse_entry_bpf_out) {
+				.backing_action = FUSE_ACTION_REPLACE,
+				.backing_fd = backing_fd,
+			     }));
+		TESTSYSCALL(close(backing_fd));
+
+		// Lookup folder1 as a reaction to failed revalidate
+		TESTFUSELOOKUP(folder1, 0);
+		TESTSYSCALL(s_fuse_attr(s_path(s(ft_src), s(folder1)), &attr));
+		TEST(backing_fd = s_open(s_path(s(ft_src), s(folder1)),
+					 O_DIRECTORY | O_RDONLY | O_CLOEXEC),
+		     backing_fd != -1);
+		TESTFUSEOUT2(fuse_entry_out, ((struct fuse_entry_out) {
+				.nodeid = attr.ino,
+				.generation = 0,
+				.entry_valid = UINT64_MAX,
+				.attr_valid = UINT64_MAX,
+				.entry_valid_nsec = UINT32_MAX,
+				.attr_valid_nsec = UINT32_MAX,
+				.attr = attr,
+			     }), fuse_entry_bpf_out, ((struct fuse_entry_bpf_out) {
+				.backing_action = FUSE_ACTION_REPLACE,
+				.backing_fd = backing_fd,
+			     }));
+		TESTSYSCALL(close(backing_fd));
+	FUSE_DONE
+	result = TEST_SUCCESS;
+out:
+	close(fuse_dev);
+	close(content_fd);
+	close(src_fd);
+	umount(mount_dir);
+	return result;
+}
+
+static int parse_options(int argc, char *const *argv)
+{
+	signed char c;
+
+	while ((c = getopt(argc, argv, "f:t:v")) != -1)
+		switch (c) {
+		case 'f':
+			test_options.file = strtol(optarg, NULL, 10);
+			break;
+
+		case 't':
+			test_options.test = strtol(optarg, NULL, 10);
+			break;
+
+		case 'v':
+			test_options.verbose = true;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+	return 0;
+}
+
+struct test_case {
+	int (*pfunc)(const char *dir);
+	const char *name;
+};
+
+static void run_one_test(const char *mount_dir, struct test_case *test_case)
+{
+	ksft_print_msg("Running %s\n", test_case->name);
+	bpf_clear_trace();
+	if (test_case->pfunc(mount_dir) == TEST_SUCCESS)
+		ksft_test_result_pass("%s\n", test_case->name);
+	else
+		ksft_test_result_fail("%s\n", test_case->name);
+}
+
+int main(int argc, char *argv[])
+{
+	char *mount_dir = NULL;
+	char *src_dir = NULL;
+	int i;
+	int fd, count;
+
+	if (parse_options(argc, argv))
+		ksft_exit_fail_msg("Bad options\n");
+
+	// Seed randomness pool for testing on QEMU
+	// NOTE - this abuses the concept of randomness - do *not* ever do this
+	// on a machine for production use - the device will think it has good
+	// randomness when it does not.
+	fd = open("/dev/urandom", O_WRONLY | O_CLOEXEC);
+	count = 4096;
+	for (int i = 0; i < 128; ++i)
+		ioctl(fd, RNDADDTOENTCNT, &count);
+	close(fd);
+
+	ksft_print_header();
+
+	if (geteuid() != 0)
+		ksft_print_msg("Not a root, might fail to mount.\n");
+
+	if (tracing_on() != TEST_SUCCESS)
+		ksft_exit_fail_msg("Can't turn on tracing\n");
+
+	src_dir = setup_mount_dir(ft_src);
+	mount_dir = setup_mount_dir(ft_dst);
+	if (src_dir == NULL || mount_dir == NULL)
+		ksft_exit_fail_msg("Can't create a mount dir\n");
+
+#define MAKE_TEST(test)                                                        \
+	{                                                                      \
+		test, #test                                                    \
+	}
+	struct test_case cases[] = {
+		MAKE_TEST(basic_test),
+		MAKE_TEST(bpf_test_real),
+		MAKE_TEST(bpf_test_partial),
+		MAKE_TEST(bpf_test_attrs),
+		MAKE_TEST(bpf_test_readdir),
+		MAKE_TEST(bpf_test_creat),
+		MAKE_TEST(bpf_test_hidden_entries),
+		MAKE_TEST(bpf_test_dir),
+		MAKE_TEST(bpf_test_file_early_close),
+		MAKE_TEST(bpf_test_file_late_close),
+		MAKE_TEST(bpf_test_mknod),
+		MAKE_TEST(bpf_test_largedir),
+		MAKE_TEST(bpf_test_link),
+		MAKE_TEST(bpf_test_symlink),
+		MAKE_TEST(bpf_test_xattr),
+		MAKE_TEST(bpf_test_redact_readdir),
+		MAKE_TEST(bpf_test_set_backing),
+		MAKE_TEST(bpf_test_set_backing_folder),
+		MAKE_TEST(bpf_test_remove_backing),
+		MAKE_TEST(bpf_test_dir_rename),
+		MAKE_TEST(bpf_test_file_rename),
+		MAKE_TEST(bpf_test_alter_errcode_bpf),
+		MAKE_TEST(bpf_test_alter_errcode_userspace),
+		MAKE_TEST(mmap_test),
+		MAKE_TEST(readdir_perms_test),
+		MAKE_TEST(bpf_test_statfs),
+		MAKE_TEST(bpf_test_lseek),
+		MAKE_TEST(bpf_test_readdirplus_not_overriding_backing),
+		MAKE_TEST(bpf_test_no_readdirplus_without_nodeid),
+		MAKE_TEST(bpf_test_revalidate_handle_backing_fd),
+		MAKE_TEST(bpf_test_verifier),
+		MAKE_TEST(bpf_test_verifier_out_args),
+		MAKE_TEST(bpf_test_verifier_packet_invalidation),
+		MAKE_TEST(bpf_test_verifier_nonsense_read)
+	};
+#undef MAKE_TEST
+
+	if (test_options.test) {
+		if (test_options.test <= 0 ||
+		    test_options.test > ARRAY_SIZE(cases))
+			ksft_exit_fail_msg("Invalid test\n");
+
+		ksft_set_plan(1);
+		delete_dir_tree(mount_dir, false);
+		delete_dir_tree(src_dir, false);
+		run_one_test(mount_dir, &cases[test_options.test - 1]);
+	} else {
+		ksft_set_plan(ARRAY_SIZE(cases));
+		for (i = 0; i < ARRAY_SIZE(cases); ++i) {
+			delete_dir_tree(mount_dir, false);
+			delete_dir_tree(src_dir, false);
+			run_one_test(mount_dir, &cases[i]);
+		}
+	}
+
+	umount2(mount_dir, MNT_FORCE);
+	delete_dir_tree(mount_dir, true);
+	delete_dir_tree(src_dir, true);
+	return !ksft_get_fail_cnt() ? ksft_exit_pass() : ksft_exit_fail();
+}
diff --git a/tools/testing/selftests/filesystems/fuse/test_bpf.c b/tools/testing/selftests/filesystems/fuse/test_bpf.c
new file mode 100644
index 000000000000..da28792c3eaa
--- /dev/null
+++ b/tools/testing/selftests/filesystems/fuse/test_bpf.c
@@ -0,0 +1,800 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+// Copyright (c) 2021 Google LLC
+
+#include <linux/fuse.h>
+#include <linux/errno.h>
+#include <uapi/linux/bpf.h>
+#include <linux/types.h>
+
+#include <stdbool.h>
+
+#define SEC(NAME) __attribute__((section(NAME), used))
+
+static long (*bpf_trace_printk)(const char *fmt, __u32 fmt_size, ...)
+	= (void *) 6;
+
+#define bpf_printk(fmt, ...)					\
+	({			                                \
+		char ____fmt[] = fmt;                           \
+		bpf_trace_printk(____fmt, sizeof(____fmt),      \
+		                 ##__VA_ARGS__);                \
+	})
+
+//static long (*bpf_fuse_get_writeable_in)(struct fuse_bpf_args *fa, u32 index, void *value,
+//					 u64 size, bool copy)
+//	= (void *) 208;
+static long (*bpf_fuse_get_writeable_out)(struct __bpf_fuse_args *fa, u32 index, void *value,
+					  u64 size, bool copy)
+	= (void *) 209;
+
+
+//#define bpf_make_writable_in(fa, index, size, copy)\
+//	(void *)bpf_fuse_get_writeable_in(fa, index, size, copy)
+#define bpf_make_writable_out(fa, index, value, size, copy) \
+	(void *)bpf_fuse_get_writeable_out(fa, index, (void *)(long)value, size, copy)
+
+inline const void *fa_verify_in(struct __bpf_fuse_args *fa, int i, unsigned int size)
+{
+	const char *val = (void *)(long)fa->in_args[i].value;
+	const char *end = (void *)(long)fa->in_args[i].end_offset;
+
+	if (i >= fa->in_numargs)
+		return NULL;
+	if (val + size <= end)
+		return val;
+	return NULL;
+}
+
+inline void *fa_verify_out(struct __bpf_fuse_args *fa, int i, unsigned int size)
+{
+	char *val = (void *)(long)fa->out_args[i].value;
+	char *end = (void *)(long)fa->out_args[i].end_offset;
+
+	if (i >= fa->out_numargs)
+		return NULL;
+	if (val + size <= end)
+		return val;
+	return NULL;
+}
+
+SEC("dummy")
+
+inline int strcmp(const char *a, const char *b)
+{
+	int i;
+
+	for (i = 0; i < __builtin_strlen(b) + 1; ++i)
+		if (a[i] != b[i])
+			return -1;
+	return 0;
+}
+
+/* This is a macro to enforce inlining. Without it, the compiler will do the wrong thing for bpf */
+#define strcmp_check(a, b, end_b) \
+		(((b) + __builtin_strlen(a) + 1 > (end_b)) ? -1 : strcmp((b), (a)))
+
+SEC("test_readdir_redact")
+/* return BPF_FUSE_CONTINUE to use backing fs, BPF_FUSE_USER to pass to usermode */
+int readdir_test(struct __bpf_fuse_args *fa)
+{
+	switch (fa->opcode) {
+	case FUSE_READDIR | FUSE_PREFILTER: {
+		const struct fuse_read_in *fri = fa_verify_in(fa, 0, sizeof(*fri));
+
+		if (!fri)
+			return -1;
+
+		bpf_printk("readdir %d", fri->fh);
+		return BPF_FUSE_POSTFILTER;
+	}
+
+	case FUSE_READDIR | FUSE_POSTFILTER: {
+		const struct fuse_read_in *fri = fa_verify_in(fa, 0, sizeof(*fri));
+
+		if (!fri)
+			return -1;
+
+		bpf_printk("readdir postfilter %x", fri->fh);
+		return BPF_FUSE_USER_POSTFILTER;
+	}
+
+	default:
+		bpf_printk("opcode %d", fa->opcode);
+		return BPF_FUSE_CONTINUE;
+	}
+}
+SEC("test_trace")
+
+/* return BPF_FUSE_CONTINUE to use backing fs, BPF_FUSE_USER to pass to usermode */
+int trace_test(struct __bpf_fuse_args *fa)
+{
+	switch (fa->opcode) {
+	case FUSE_LOOKUP | FUSE_PREFILTER: {
+		/* real and partial use backing file */
+		const char *name = (void *)(long)fa->in_args[0].value;
+		const char *end = (void *)(long)fa->in_args[0].end_offset;
+		bool backing = false;
+
+		if (strcmp_check("real", name, end) == 0 || strcmp_check("partial", name, end) == 0)
+			backing = true;
+
+		if (strcmp_check("dir", name, end) == 0)
+			backing = true;
+		if (strcmp_check("dir2", name, end) == 0)
+			backing = true;
+
+		if (strcmp_check("file1", name, end) == 0)
+			backing = true;
+		if (strcmp_check("file2", name, end) == 0)
+			backing = true;
+
+		bpf_printk("lookup %s %d", name, backing);
+		return backing ? BPF_FUSE_POSTFILTER : BPF_FUSE_USER;
+	}
+
+	case FUSE_LOOKUP | FUSE_POSTFILTER: {
+		const char *name = (void *)(long)fa->in_args[0].value;
+		const char *end = (void *)(long)fa->in_args[0].end_offset;
+		struct fuse_entry_out *feo = (struct fuse_entry_out *)
+				bpf_make_writable_out(fa, 0, fa->out_args[0].value,
+						      sizeof(*feo), true);
+
+		if (!feo)
+			return -1;
+
+		if (strcmp_check("real", name, end) == 0)
+			feo->nodeid = 5;
+		else if (strcmp_check("partial", name, end) == 0)
+			feo->nodeid = 6;
+
+		bpf_printk("post-lookup %s %d", name, feo->nodeid);
+		return 0;
+	}
+
+	case FUSE_ACCESS | FUSE_PREFILTER: {
+		bpf_printk("Access: %d", fa->nodeid);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_CREATE | FUSE_PREFILTER:
+		bpf_printk("Create: %d", fa->nodeid);
+		return BPF_FUSE_CONTINUE;
+
+	case FUSE_MKNOD | FUSE_PREFILTER: {
+		const struct fuse_mknod_in *fmi = fa_verify_in(fa, 0, sizeof(*fmi));
+		const char *name = (void *)(long)fa->in_args[1].value;
+
+		if (!fmi)
+			return -1;
+
+		bpf_printk("mknod %s %x %x", name, fmi->rdev | fmi->mode, fmi->umask);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_MKDIR | FUSE_PREFILTER: {
+		const struct fuse_mkdir_in *fmi = fa_verify_in(fa, 0, sizeof(*fmi));
+		const char *name = (void *)(long)fa->in_args[1].value;
+
+		if (!fmi)
+			return -1;
+
+		bpf_printk("mkdir %s %x %x", name, fmi->mode, fmi->umask);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_RMDIR | FUSE_PREFILTER: {
+		const char *name = (void *)(long)fa->in_args[0].value;
+
+		bpf_printk("rmdir %s", name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_RENAME | FUSE_PREFILTER: {
+		const char *oldname = (void *)(long)fa->in_args[1].value;
+		const char *newname = (void *)(long)fa->in_args[2].value;
+
+		bpf_printk("rename from %s", oldname);
+		bpf_printk("rename to %s", newname);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_RENAME2 | FUSE_PREFILTER: {
+		const struct fuse_rename2_in *fri = fa_verify_in(fa, 0, sizeof(*fri));
+		uint32_t flags = fri->flags;
+		const char *oldname = (void *)(long) fa->in_args[1].value;
+		const char *newname = (void *)(long) fa->in_args[2].value;
+
+		if (!fri)
+			return -1;
+
+		bpf_printk("rename(%x) from %s", flags, oldname);
+		bpf_printk("rename to %s", newname);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_UNLINK | FUSE_PREFILTER: {
+		const char *name = (void *)(long)fa->in_args[0].value;
+
+		bpf_printk("unlink %s", name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_LINK | FUSE_PREFILTER: {
+		const struct fuse_link_in *fli = fa_verify_in(fa, 0, sizeof(*fli));
+		const char *link_name = (void *)(long) fa->in_args[1].value;
+
+		if (!fli)
+			return -1;
+
+		bpf_printk("link %d %s", fli->oldnodeid, link_name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_SYMLINK | FUSE_PREFILTER: {
+		const char *link_name = (void *)(long) fa->in_args[0].value;
+		const char *link_dest = (void *)(long) fa->in_args[1].value;
+
+		bpf_printk("symlink from %s", link_name);
+		bpf_printk("symlink to %s", link_dest);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_READLINK | FUSE_PREFILTER: {
+		const char *link_name = (void *)(long) fa->in_args[0].value;
+
+		bpf_printk("readlink from", link_name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_OPEN | FUSE_PREFILTER: {
+		int backing = BPF_FUSE_USER;
+
+		switch (fa->nodeid) {
+		case 5:
+			backing = BPF_FUSE_CONTINUE;
+			break;
+
+		case 6:
+			backing = BPF_FUSE_POSTFILTER;
+			break;
+
+		default:
+			break;
+		}
+
+		bpf_printk("open %d %d", fa->nodeid, backing);
+		return backing;
+	}
+
+	case FUSE_OPEN | FUSE_POSTFILTER:
+		bpf_printk("open postfilter");
+		return BPF_FUSE_USER_POSTFILTER;
+
+	case FUSE_READ | FUSE_PREFILTER: {
+		const struct fuse_read_in *fri = fa_verify_in(fa, 0, sizeof(*fri));
+
+		if (!fri)
+			return -1;
+
+		bpf_printk("read %llu %llu", fri->fh, fri->offset);
+		if (fri->fh == 1 && fri->offset == 0)
+			return BPF_FUSE_USER;
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_GETATTR | FUSE_PREFILTER: {
+		/* real and partial use backing file */
+		int backing = BPF_FUSE_USER;
+
+		switch (fa->nodeid) {
+		case 1:
+		case 5:
+		case 6:
+		/*
+		 * TODO: Find better solution
+		 * Add 100 to stop clang compiling to jump table which bpf hates
+		 */
+		case 100:
+			backing = BPF_FUSE_CONTINUE;
+			break;
+		}
+
+		bpf_printk("getattr %d %d", fa->nodeid, backing);
+		return backing;
+	}
+
+	case FUSE_SETATTR | FUSE_PREFILTER: {
+		/* real and partial use backing file */
+		int backing = BPF_FUSE_USER;
+
+		switch (fa->nodeid) {
+		case 1:
+		case 5:
+		case 6:
+		/* TODO See above */
+		case 100:
+			backing = BPF_FUSE_CONTINUE;
+			break;
+		}
+
+		bpf_printk("setattr %d %d", fa->nodeid, backing);
+		return backing;
+	}
+
+	case FUSE_OPENDIR | FUSE_PREFILTER: {
+		int backing = BPF_FUSE_USER;
+
+		switch (fa->nodeid) {
+		case 1:
+			backing = BPF_FUSE_POSTFILTER;
+			break;
+		}
+
+		bpf_printk("opendir %d %d", fa->nodeid, backing);
+		return backing;
+	}
+
+	case FUSE_OPENDIR | FUSE_POSTFILTER: {
+		struct fuse_open_out *foo = bpf_make_writable_out(fa, 0, fa->out_args[0].value,
+								  sizeof(*foo), true);
+
+		if (!foo)
+			return -1;
+
+		foo->fh = 2;
+		bpf_printk("opendir postfilter");
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_READDIR | FUSE_PREFILTER: {
+		const struct fuse_read_in *fri = fa_verify_in(fa, 0, sizeof(*fri));
+		int backing = BPF_FUSE_USER;
+
+		if (!fri)
+			return -1;
+
+		if (fri->fh == 2)
+			backing = BPF_FUSE_POSTFILTER;
+
+		bpf_printk("readdir %d %d", fri->fh, backing);
+		return backing;
+	}
+
+	case FUSE_READDIR | FUSE_POSTFILTER: {
+		const struct fuse_read_in *fri = fa_verify_in(fa, 0, sizeof(*fri));
+		int backing = BPF_FUSE_CONTINUE;
+
+		if (!fri)
+			return -1;
+
+		if (fri->fh == 2)
+			backing = BPF_FUSE_USER_POSTFILTER;
+
+		bpf_printk("readdir postfilter %d %d", fri->fh, backing);
+		return backing;
+	}
+
+	case FUSE_FLUSH | FUSE_PREFILTER: {
+		const struct fuse_flush_in *ffi = fa_verify_in(fa, 0, sizeof(*ffi));
+
+		if (!ffi)
+			return -1;
+
+		bpf_printk("Flush %d", ffi->fh);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_GETXATTR | FUSE_PREFILTER: {
+		const struct fuse_getxattr_in *fgi = fa_verify_in(fa, 0, sizeof(*fgi));
+		const char *name = (void *)(long)fa->in_args[1].value;
+
+		if (!fgi)
+			return -1;
+
+		bpf_printk("getxattr %d %s", fgi->size, name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_LISTXATTR | FUSE_PREFILTER: {
+		const struct fuse_getxattr_in *fgi = fa_verify_in(fa, 0, sizeof(*fgi));
+		const char *name = (void *)(long)fa->in_args[1].value;
+
+		if (!fgi)
+			return -1;
+
+		bpf_printk("listxattr %d %s", fgi->size, name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_SETXATTR | FUSE_PREFILTER: {
+		const struct fuse_setxattr_in *fsi = fa_verify_in(fa, 0, sizeof(*fsi));
+		const char *name = (void *)(long)fa->in_args[1].value;
+		unsigned int size = fa->in_args[2].size;
+
+		if (!fsi)
+			return -1;
+		bpf_printk("setxattr %x %s %u", fsi->flags, name, size);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_REMOVEXATTR | FUSE_PREFILTER: {
+		const char *name = (void *)(long)fa->in_args[0].value;
+
+		bpf_printk("removexattr %s", name);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_CANONICAL_PATH | FUSE_PREFILTER: {
+		bpf_printk("canonical_path");
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_STATFS | FUSE_PREFILTER: {
+		bpf_printk("statfs");
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_LSEEK | FUSE_PREFILTER: {
+		const struct fuse_lseek_in *fli = fa_verify_in(fa, 0, sizeof(*fli));
+
+		if (!fli)
+			return -1;
+		bpf_printk("lseek type:%d, offset:%lld", fli->whence, fli->offset);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	default:
+		bpf_printk("Unknown opcode %d", fa->opcode);
+		return BPF_FUSE_USER;
+	}
+}
+
+SEC("test_hidden")
+
+int trace_hidden(struct __bpf_fuse_args *fa)
+{
+	switch (fa->opcode) {
+	case FUSE_LOOKUP | FUSE_PREFILTER: {
+		const char *name = (void *)(long)fa->in_args[0].value;
+		const char *end = (void *)(long)fa->in_args[0].end_offset;
+
+		bpf_printk("Lookup: %s", name);
+		if (!strcmp_check("show", name, end))
+			return BPF_FUSE_CONTINUE;
+		if (!strcmp_check("hide", name, end))
+			return -ENOENT;
+
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_ACCESS | FUSE_PREFILTER: {
+		bpf_printk("Access: %d", fa->nodeid);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_CREATE | FUSE_PREFILTER:
+		bpf_printk("Create: %d", fa->nodeid);
+		return BPF_FUSE_CONTINUE;
+
+	case FUSE_WRITE | FUSE_PREFILTER:
+	// TODO: Clang combines similar printk calls, causing BPF to complain
+	//	bpf_printk("Write: %d", fa->nodeid);
+		return BPF_FUSE_CONTINUE;
+
+	case FUSE_FLUSH | FUSE_PREFILTER: {
+	//	const struct fuse_flush_in *ffi = fa->in_args[0].value;
+
+	//	bpf_printk("Flush %d", ffi->fh);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_RELEASE | FUSE_PREFILTER: {
+	//	const struct fuse_release_in *fri = fa->in_args[0].value;
+
+	//	bpf_printk("Release %d", fri->fh);
+		return BPF_FUSE_CONTINUE;
+	}
+
+	case FUSE_FALLOCATE | FUSE_PREFILTER:
+	//	bpf_printk("fallocate %d", fa->nodeid);
+		return BPF_FUSE_CONTINUE;
+
+	case FUSE_CANONICAL_PATH | FUSE_PREFILTER: {
+		return BPF_FUSE_CONTINUE;
+	}
+	default:
+		bpf_printk("Unknown opcode: %d", fa->opcode);
+		return BPF_FUSE_CONTINUE;
+	}
+}
+
+SEC("test_simple")
+int trace_simple(struct __bpf_fuse_args *fa)
+{
+	if (fa->opcode & FUSE_PREFILTER)
+		bpf_printk("prefilter opcode: %d",
+			   fa->opcode & FUSE_OPCODE_FILTER);
+	else if (fa->opcode & FUSE_POSTFILTER)
+		bpf_printk("postfilter opcode: %d",
+			   fa->opcode & FUSE_OPCODE_FILTER);
+	else
+		bpf_printk("*** UNKNOWN *** opcode: %d", fa->opcode);
+	return BPF_FUSE_CONTINUE;
+}
+
+SEC("test_passthrough")
+int trace_daemon(struct __bpf_fuse_args *fa)
+{
+	switch (fa->opcode) {
+	case FUSE_LOOKUP | FUSE_PREFILTER: {
+		const char *name = (void *)(long)fa->in_args[0].value;
+
+		bpf_printk("Lookup prefilter: %lx %s", fa->nodeid, name);
+		return BPF_FUSE_POSTFILTER;
+	}
+
+	case FUSE_LOOKUP | FUSE_POSTFILTER: {
+		const char *name = (void *)(long)fa->in_args[0].value;
+		struct fuse_entry_bpf_out *febo = bpf_make_writable_out(fa, 1,
+									fa->out_args[1].value,
+									sizeof(*febo), true);
+
+		if (!febo)
+			return -1;
+		bpf_printk("Lookup postfilter: %lx %s %lu", fa->nodeid, name);
+		febo->bpf_action = FUSE_ACTION_REMOVE;
+
+		return BPF_FUSE_USER_POSTFILTER;
+	}
+
+	default:
+		if (fa->opcode & FUSE_PREFILTER)
+			bpf_printk("prefilter opcode: %d",
+				   fa->opcode & FUSE_OPCODE_FILTER);
+		else if (fa->opcode & FUSE_POSTFILTER)
+			bpf_printk("postfilter opcode: %d",
+				   fa->opcode & FUSE_OPCODE_FILTER);
+		else
+			bpf_printk("*** UNKNOWN *** opcode: %d", fa->opcode);
+		return BPF_FUSE_CONTINUE;
+	}
+}
+
+SEC("test_error")
+
+/* return BPF_FUSE_CONTINUE to use backing fs, BPF_FUSE_USER to pass to usermode */
+int error_test(struct __bpf_fuse_args *fa)
+{
+	switch (fa->opcode) {
+	case FUSE_MKDIR | FUSE_PREFILTER: {
+		bpf_printk("mkdir");
+		return BPF_FUSE_POSTFILTER;
+	}
+	case FUSE_MKDIR | FUSE_POSTFILTER: {
+		bpf_printk("mkdir postfilter");
+		if (fa->error_in == -EEXIST)
+			return -EPERM;
+
+		return 0;
+	}
+
+	case FUSE_LOOKUP | FUSE_PREFILTER: {
+		const char *name = (void *)(long)fa->in_args[0].value;
+
+		bpf_printk("lookup prefilter %s", name);
+		return BPF_FUSE_POSTFILTER;
+	}
+	case FUSE_LOOKUP | FUSE_POSTFILTER: {
+		const char *name = (void *)(long)fa->in_args[0].value;
+		const char *end = (void *)(long)fa->in_args[0].end_offset;
+
+		bpf_printk("lookup postfilter %s %d", name, fa->error_in);
+		if (strcmp_check("doesnotexist", name, end) == 0/* && fa->error_in == -EEXIST*/) {
+			bpf_printk("lookup postfilter doesnotexist");
+			return BPF_FUSE_USER_POSTFILTER;
+		}
+
+		return 0;
+	}
+
+	default:
+		if (fa->opcode & FUSE_PREFILTER)
+			bpf_printk("prefilter opcode: %d",
+				   fa->opcode & FUSE_OPCODE_FILTER);
+		else if (fa->opcode & FUSE_POSTFILTER)
+			bpf_printk("postfilter opcode: %d",
+				   fa->opcode & FUSE_OPCODE_FILTER);
+		else
+			bpf_printk("*** UNKNOWN *** opcode: %d", fa->opcode);
+		return BPF_FUSE_CONTINUE;
+	}
+}
+
+
+SEC("test_readdirplus")
+int readdirplus_test(struct __bpf_fuse_args *fa)
+{
+	switch (fa->opcode) {
+	case FUSE_READDIR | FUSE_PREFILTER: {
+		return BPF_FUSE_USER;
+	}
+	}
+	return BPF_FUSE_CONTINUE;
+}
+
+SEC("test_verify")
+
+int verify_test(struct __bpf_fuse_args *fa)
+{
+	if (fa->opcode == (FUSE_MKDIR | FUSE_PREFILTER)) {
+		const char *start;
+		const char *end;
+		const struct fuse_mkdir_in *in;
+
+		start = (void *)(long) fa->in_args[0].value;
+		end = (void *)(long) fa->in_args[0].end_offset;
+		if (start + sizeof(*in) <= end) {
+			in = (struct fuse_mkdir_in *)(start);
+			bpf_printk("test1: %d %d", in->mode, in->umask);
+		}
+
+		return BPF_FUSE_CONTINUE;
+	}
+	return BPF_FUSE_CONTINUE;
+}
+
+SEC("test_verify_fail")
+
+int verify_fail_test(struct __bpf_fuse_args *fa)
+{
+	struct t {
+		uint32_t a;
+		uint32_t b;
+		char d[];
+	};
+	if (fa->opcode == (FUSE_MKDIR | FUSE_PREFILTER)) {
+		const char *start;
+		const char *end;
+		const struct t *c;
+
+		start = (void *)(long) fa->in_args[0].value;
+		end = (void *)(long) fa->in_args[0].end_offset;
+		if (start + sizeof(struct t) <= end) {
+			c = (struct t *)start;
+			bpf_printk("test1: %d %d %d", c->a, c->b, c->d[0]);
+		}
+		return BPF_FUSE_CONTINUE;
+	}
+	return BPF_FUSE_CONTINUE;
+}
+
+SEC("test_verify_fail2")
+
+int verify_fail_test2(struct __bpf_fuse_args *fa)
+{
+	if (fa->opcode == (FUSE_MKDIR | FUSE_PREFILTER)) {
+		const char *start;
+		const char *end;
+		struct fuse_mkdir_in *c;
+
+		start = (void *)(long) fa->in_args[0].value;
+		end = (void *)(long) fa->in_args[1].end_offset;
+		if (start + sizeof(*c) <= end) {
+			c = (struct fuse_mkdir_in *)start;
+			bpf_printk("test1: %d %d", c->mode, c->umask);
+		}
+		return BPF_FUSE_CONTINUE;
+	}
+	return BPF_FUSE_CONTINUE;
+}
+
+SEC("test_verify_fail3")
+/* Cannot write directly to fa */
+int verify_fail_test3(struct __bpf_fuse_args *fa)
+{
+	if (fa->opcode == (FUSE_LOOKUP | FUSE_POSTFILTER)) {
+		const char *name = (void *)(long)fa->in_args[0].value;
+		const char *end = (void *)(long)fa->in_args[0].end_offset;
+		struct fuse_entry_out *feo = fa_verify_out(fa, 0, sizeof(*feo));
+
+		if (!feo)
+			return -1;
+
+		if (strcmp_check("real", name, end) == 0)
+			feo->nodeid = 5;
+		else if (strcmp_check("partial", name, end) == 0)
+			feo->nodeid = 6;
+
+		bpf_printk("post-lookup %s %d", name, feo->nodeid);
+		return BPF_FUSE_CONTINUE;
+	}
+	return BPF_FUSE_CONTINUE;
+}
+
+SEC("test_verify_fail4")
+/* Cannot write outside of requested area */
+int verify_fail_test4(struct __bpf_fuse_args *fa)
+{
+	if (fa->opcode == (FUSE_LOOKUP | FUSE_POSTFILTER)) {
+		const char *name = (void *)(long)fa->in_args[0].value;
+		const char *end = (void *)(long)fa->in_args[0].end_offset;
+		struct fuse_entry_out *feo = bpf_make_writable_out(fa, 0, fa->out_args[0].value,
+								   1, true);
+
+		if (!feo)
+			return -1;
+
+		if (strcmp_check("real", name, end) == 0)
+			feo->nodeid = 5;
+		else if (strcmp_check("partial", name, end) == 0)
+			feo->nodeid = 6;
+
+		bpf_printk("post-lookup %s %d", name, feo->nodeid);
+		return BPF_FUSE_CONTINUE;
+	}
+	return BPF_FUSE_CONTINUE;
+}
+
+SEC("test_verify_fail5")
+/* Cannot use old verification after requesting writable */
+int verify_fail_test5(struct __bpf_fuse_args *fa)
+{
+	if (fa->opcode == (FUSE_LOOKUP | FUSE_POSTFILTER)) {
+		struct fuse_entry_out *feo;
+		struct fuse_entry_out *feo_w;
+
+		feo = fa_verify_out(fa, 0, sizeof(*feo));
+		if (!feo)
+			return -1;
+
+		feo_w = bpf_make_writable_out(fa, 0, fa->out_args[0].value, sizeof(*feo_w), true);
+		bpf_printk("post-lookup %d", feo->nodeid);
+		if (!feo_w)
+			return -1;
+
+		feo_w->nodeid = 5;
+
+		return BPF_FUSE_CONTINUE;
+	}
+	return BPF_FUSE_CONTINUE;
+}
+
+SEC("test_verify5")
+/* Can use new verification after requesting writable */
+int verify_pass_test5(struct __bpf_fuse_args *fa)
+{
+	if (fa->opcode == (FUSE_LOOKUP | FUSE_POSTFILTER)) {
+		struct fuse_entry_out *feo;
+		struct fuse_entry_out *feo_w;
+
+		feo = fa_verify_out(fa, 0, sizeof(*feo));
+		if (!feo)
+			return -1;
+
+		bpf_printk("post-lookup %d", feo->nodeid);
+
+		feo_w = bpf_make_writable_out(fa, 0, fa->out_args[0].value, sizeof(*feo_w), true);
+
+		feo = fa_verify_out(fa, 0, sizeof(*feo));
+		if (feo)
+			bpf_printk("post-lookup %d", feo->nodeid);
+		if (!feo_w)
+			return -1;
+
+		feo_w->nodeid = 5;
+
+		return BPF_FUSE_CONTINUE;
+	}
+	return BPF_FUSE_CONTINUE;
+}
+
+SEC("test_verify_fail6")
+/* Reading context from a nonsense offset is not allowed */
+int verify_pass_test6(struct __bpf_fuse_args *fa)
+{
+	char *nonsense = (char *)fa;
+
+	bpf_printk("post-lookup %d", nonsense[1]);
+
+	return BPF_FUSE_CONTINUE;
+}
diff --git a/tools/testing/selftests/filesystems/fuse/test_framework.h b/tools/testing/selftests/filesystems/fuse/test_framework.h
new file mode 100644
index 000000000000..2e376c0f2994
--- /dev/null
+++ b/tools/testing/selftests/filesystems/fuse/test_framework.h
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 Google LLC
+ */
+
+#ifndef _TEST_FRAMEWORK_H
+#define _TEST_FRAMEWORK_H
+
+#include <stdbool.h>
+#include <stdio.h>
+
+#ifdef __ANDROID__
+static int test_case_pass;
+static int test_case_fail;
+#define ksft_print_msg			printf
+#define ksft_test_result_pass(...)	({test_case_pass++; printf(__VA_ARGS__); })
+#define ksft_test_result_fail(...)	({test_case_fail++; printf(__VA_ARGS__); })
+#define ksft_exit_fail_msg(...)		printf(__VA_ARGS__)
+#define ksft_print_header()
+#define ksft_set_plan(cnt)
+#define ksft_get_fail_cnt()		test_case_fail
+#define ksft_exit_pass()		0
+#define ksft_exit_fail()		1
+#else
+#include <kselftest.h>
+#endif
+
+#define TEST_FAILURE 1
+#define TEST_SUCCESS 0
+
+#define ptr_to_u64(p) ((__u64)p)
+
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+#define le16_to_cpu(x)          (x)
+#define le32_to_cpu(x)          (x)
+#define le64_to_cpu(x)          (x)
+#else
+#error Big endian not supported!
+#endif
+
+struct _test_options {
+	int file;
+	int test;
+	bool verbose;
+};
+
+extern struct _test_options test_options;
+
+#define TESTCOND(condition)						\
+	do {								\
+		if (!(condition)) {					\
+			ksft_print_msg("%s failed %d\n",		\
+				       __func__, __LINE__);		\
+			goto out;					\
+		} else if (test_options.verbose)			\
+			ksft_print_msg("%s succeeded %d\n",		\
+				       __func__, __LINE__);		\
+	} while (false)
+
+#define TESTCONDERR(condition)						\
+	do {								\
+		if (!(condition)) {					\
+			ksft_print_msg("%s failed %d\n",		\
+				       __func__, __LINE__);		\
+			ksft_print_msg("Error %d (\"%s\")\n",		\
+				       errno, strerror(errno));		\
+			goto out;					\
+		} else if (test_options.verbose)			\
+			ksft_print_msg("%s succeeded %d\n",		\
+				       __func__, __LINE__);		\
+	} while (false)
+
+#define TEST(statement, condition)					\
+	do {								\
+		statement;						\
+		TESTCOND(condition);					\
+	} while (false)
+
+#define TESTERR(statement, condition)					\
+	do {								\
+		statement;						\
+		TESTCONDERR(condition);					\
+	} while (false)
+
+enum _operator {
+	_eq,
+	_ne,
+	_ge,
+};
+
+static const char * const _operator_name[] = {
+	"==",
+	"!=",
+	">=",
+};
+
+#define _TEST_OPERATOR(name, _type, format_specifier)			\
+static inline int _test_operator_##name(const char *func, int line,	\
+				_type a, _type b, enum _operator o)	\
+{									\
+	bool pass;							\
+	switch (o) {							\
+	case _eq: pass = a == b; break;					\
+	case _ne: pass = a != b; break;					\
+	case _ge: pass = a >= b; break;					\
+	}								\
+									\
+	if (!pass)							\
+		ksft_print_msg("Failed: %s at line %d, "		\
+			       format_specifier " %s "			\
+			       format_specifier	"\n",			\
+			       func, line, a, _operator_name[o], b);	\
+	else if (test_options.verbose)					\
+		ksft_print_msg("Passed: %s at line %d, "		\
+			       format_specifier " %s "			\
+			       format_specifier "\n",			\
+			       func, line, a, _operator_name[o], b);	\
+									\
+	return pass ? TEST_SUCCESS : TEST_FAILURE;			\
+}
+
+_TEST_OPERATOR(i, int, "%d")
+_TEST_OPERATOR(ui, unsigned int, "%u")
+_TEST_OPERATOR(lui, unsigned long, "%lu")
+_TEST_OPERATOR(ss, ssize_t, "%zd")
+_TEST_OPERATOR(vp, void *, "%px")
+_TEST_OPERATOR(cp, char *, "%px")
+
+#define _CALL_TO(_type, name, a, b, o)					\
+	_type:_test_operator_##name(__func__, __LINE__,			\
+				  (_type) (long long) (a),		\
+				  (_type) (long long) (b), o)
+
+#define TESTOPERATOR(a, b, o)						\
+	do {								\
+		if (_Generic((a),					\
+			     _CALL_TO(int, i, a, b, o),			\
+			     _CALL_TO(unsigned int, ui, a, b, o),	\
+			     _CALL_TO(unsigned long, lui, a, b, o),	\
+			     _CALL_TO(ssize_t, ss, a, b, o),		\
+			     _CALL_TO(void *, vp, a, b, o),		\
+			     _CALL_TO(char *, cp, a, b, o)		\
+		))							\
+			goto out;					\
+	} while (false)
+
+#define TESTEQUAL(a, b) TESTOPERATOR(a, b, _eq)
+#define TESTNE(a, b) TESTOPERATOR(a, b, _ne)
+#define TESTGE(a, b) TESTOPERATOR(a, b, _ge)
+
+/* For testing a syscall that returns 0 on success and sets errno otherwise */
+#define TESTSYSCALL(statement) TESTCONDERR((statement) == 0)
+
+static inline void print_bytes(const void *data, size_t size)
+{
+	const char *bytes = data;
+	int i;
+
+	for (i = 0; i < size; ++i) {
+		if (i % 0x10 == 0)
+			printf("%08x:", i);
+		printf("%02x ", (unsigned int) (unsigned char) bytes[i]);
+		if (i % 0x10 == 0x0f)
+			printf("\n");
+	}
+
+	if (i % 0x10 != 0)
+		printf("\n");
+}
+
+
+
+#endif
diff --git a/tools/testing/selftests/filesystems/fuse/test_fuse.h b/tools/testing/selftests/filesystems/fuse/test_fuse.h
new file mode 100644
index 000000000000..a1ef10af079b
--- /dev/null
+++ b/tools/testing/selftests/filesystems/fuse/test_fuse.h
@@ -0,0 +1,328 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 Google LLC
+ */
+
+#ifndef TEST_FUSE__H
+#define TEST_FUSE__H
+
+#define _GNU_SOURCE
+
+#include "test_framework.h"
+
+#include <dirent.h>
+#include <sys/stat.h>
+#include <sys/statfs.h>
+#include <sys/types.h>
+
+#include <uapi/linux/fuse.h>
+
+#define PAGE_SIZE 4096
+#define FUSE_POSTFILTER 0x20000
+
+extern struct _test_options test_options;
+
+/* Slow but semantically easy string functions */
+
+/*
+ * struct s just wraps a char pointer
+ * It is a pointer to a malloc'd string, or null
+ * All consumers handle null input correctly
+ * All consumers free the string
+ */
+struct s {
+	char *s;
+};
+
+struct s s(const char *s1);
+struct s sn(const char *s1, const char *s2);
+int s_cmp(struct s s1, struct s s2);
+struct s s_cat(struct s s1, struct s s2);
+struct s s_splitleft(struct s s1, char c);
+struct s s_splitright(struct s s1, char c);
+struct s s_word(struct s s1, char c, size_t n);
+struct s s_path(struct s s1, struct s s2);
+struct s s_pathn(size_t n, struct s s1, ...);
+int s_link(struct s src_pathname, struct s dst_pathname);
+int s_symlink(struct s src_pathname, struct s dst_pathname);
+int s_mkdir(struct s pathname, mode_t mode);
+int s_rmdir(struct s pathname);
+int s_unlink(struct s pathname);
+int s_open(struct s pathname, int flags, ...);
+int s_openat(int dirfd, struct s pathname, int flags, ...);
+int s_creat(struct s pathname, mode_t mode);
+int s_mkfifo(struct s pathname, mode_t mode);
+int s_stat(struct s pathname, struct stat *st);
+int s_statfs(struct s pathname, struct statfs *st);
+int s_fuse_attr(struct s pathname, struct fuse_attr *fuse_attr_out);
+DIR *s_opendir(struct s pathname);
+int s_getxattr(struct s pathname, const char name[], void *value, size_t size,
+	       ssize_t *ret_size);
+int s_listxattr(struct s pathname, void *list, size_t size, ssize_t *ret_size);
+int s_setxattr(struct s pathname, const char name[], const void *value,
+	       size_t size, int flags);
+int s_removexattr(struct s pathname, const char name[]);
+int s_rename(struct s oldpathname, struct s newpathname);
+
+struct s tracing_folder(void);
+int tracing_on(void);
+
+char *concat_file_name(const char *dir, const char *file);
+char *setup_mount_dir(const char *name);
+int delete_dir_tree(const char *dir_path, bool remove_root);
+
+#define TESTFUSEINNULL(_opcode)						\
+	do {								\
+		struct fuse_in_header *in_header =			\
+				(struct fuse_in_header *)bytes_in;	\
+		ssize_t res = read(fuse_dev, &bytes_in,			\
+			sizeof(bytes_in));				\
+									\
+		TESTEQUAL(in_header->opcode, _opcode);			\
+		TESTEQUAL(res, sizeof(*in_header));			\
+	} while (false)
+
+#define TESTFUSEIN(_opcode, in_struct)					\
+	do {								\
+		struct fuse_in_header *in_header =			\
+				(struct fuse_in_header *)bytes_in;	\
+		ssize_t res = read(fuse_dev, &bytes_in,			\
+			sizeof(bytes_in));				\
+									\
+		TESTEQUAL(in_header->opcode, _opcode);			\
+		TESTEQUAL(res, sizeof(*in_header) + sizeof(*in_struct));\
+	} while (false)
+
+#define TESTFUSEIN2(_opcode, in_struct1, in_struct2)			\
+	do {								\
+		struct fuse_in_header *in_header =			\
+				(struct fuse_in_header *)bytes_in;	\
+		ssize_t res = read(fuse_dev, &bytes_in,			\
+			sizeof(bytes_in));				\
+									\
+		TESTEQUAL(in_header->opcode, _opcode);			\
+		TESTEQUAL(res, sizeof(*in_header) + sizeof(*in_struct1) \
+						+ sizeof(*in_struct2)); \
+		in_struct1 = (void *)(bytes_in + sizeof(*in_header));	\
+		in_struct2 = (void *)(bytes_in + sizeof(*in_header)	\
+				      + sizeof(*in_struct1));		\
+	} while (false)
+
+#define TESTFUSEINEXT(_opcode, in_struct, extra)			\
+	do {								\
+		struct fuse_in_header *in_header =			\
+				(struct fuse_in_header *)bytes_in;	\
+		ssize_t res = read(fuse_dev, &bytes_in,			\
+			sizeof(bytes_in));				\
+									\
+		TESTEQUAL(in_header->opcode, _opcode);			\
+		TESTEQUAL(res,						\
+		       sizeof(*in_header) + sizeof(*in_struct) + extra);\
+	} while (false)
+
+#define TESTFUSEINUNKNOWN()						\
+	do {								\
+		struct fuse_in_header *in_header =			\
+				(struct fuse_in_header *)bytes_in;	\
+		ssize_t res = read(fuse_dev, &bytes_in,			\
+			sizeof(bytes_in));				\
+									\
+		TESTGE(res, sizeof(*in_header));			\
+		TESTEQUAL(in_header->opcode, -1);			\
+	} while (false)
+
+/* Special case lookup since it is asymmetric */
+#define TESTFUSELOOKUP(expected, filter)				\
+	do {								\
+		struct fuse_in_header *in_header =			\
+				(struct fuse_in_header *)bytes_in;	\
+		char *name = (char *) (bytes_in + sizeof(*in_header));	\
+		ssize_t res;						\
+									\
+		TEST(res = read(fuse_dev, &bytes_in, sizeof(bytes_in)),	\
+			  res != -1);					\
+		/* TODO once we handle forgets properly, remove */	\
+		if (in_header->opcode == FUSE_FORGET)			\
+			continue;					\
+		if (in_header->opcode == FUSE_BATCH_FORGET)		\
+			continue;					\
+		TESTGE(res, sizeof(*in_header));			\
+		TESTEQUAL(in_header->opcode,				\
+			FUSE_LOOKUP | filter);				\
+		TESTEQUAL(res,						\
+			  sizeof(*in_header) + strlen(expected) + 1 +	\
+				(filter == FUSE_POSTFILTER ?		\
+				sizeof(struct fuse_entry_out) +		\
+				sizeof(struct fuse_entry_bpf_out) : 0));\
+		TESTCOND(!strcmp(name, expected));			\
+		break;							\
+	} while (true)
+
+#define TESTFUSEOUTEMPTY()						\
+	do {								\
+		struct fuse_in_header *in_header =			\
+				(struct fuse_in_header *)bytes_in;	\
+		struct fuse_out_header *out_header =			\
+			(struct fuse_out_header *)bytes_out;		\
+									\
+		*out_header = (struct fuse_out_header) {		\
+			.len = sizeof(*out_header),			\
+			.unique = in_header->unique,			\
+		};							\
+		TESTEQUAL(write(fuse_dev, bytes_out, out_header->len),	\
+			  out_header->len);				\
+	} while (false)
+
+#define TESTFUSEOUTERROR(errno)						\
+	do {								\
+		struct fuse_in_header *in_header =			\
+				(struct fuse_in_header *)bytes_in;	\
+		struct fuse_out_header *out_header =			\
+			(struct fuse_out_header *)bytes_out;		\
+									\
+		*out_header = (struct fuse_out_header) {		\
+			.len = sizeof(*out_header),			\
+			.error = errno,					\
+			.unique = in_header->unique,			\
+		};							\
+		TESTEQUAL(write(fuse_dev, bytes_out, out_header->len),	\
+			  out_header->len);				\
+	} while (false)
+
+#define TESTFUSEOUTREAD(data, length)					\
+	do {								\
+		struct fuse_in_header *in_header =			\
+				(struct fuse_in_header *)bytes_in;	\
+		struct fuse_out_header *out_header =			\
+			(struct fuse_out_header *)bytes_out;		\
+									\
+		*out_header = (struct fuse_out_header) {		\
+			.len = sizeof(*out_header) + length,		\
+			.unique = in_header->unique,			\
+		};							\
+		memcpy(bytes_out + sizeof(*out_header), data, length);	\
+		TESTEQUAL(write(fuse_dev, bytes_out, out_header->len),	\
+			  out_header->len);				\
+	} while (false)
+
+#define TESTFUSEDIROUTREAD(read_out, data, length)			\
+	do {								\
+		struct fuse_in_header *in_header =			\
+				(struct fuse_in_header *)bytes_in;	\
+		struct fuse_out_header *out_header =			\
+			(struct fuse_out_header *)bytes_out;		\
+									\
+		*out_header = (struct fuse_out_header) {		\
+			.len = sizeof(*out_header) +			\
+			       sizeof(*read_out) + length,		\
+			.unique = in_header->unique,			\
+		};							\
+		memcpy(bytes_out + sizeof(*out_header) +		\
+				sizeof(*read_out), data, length);	\
+		memcpy(bytes_out + sizeof(*out_header),			\
+				read_out, sizeof(*read_out));		\
+		TESTEQUAL(write(fuse_dev, bytes_out, out_header->len),	\
+			  out_header->len);				\
+	} while (false)
+
+#define TESTFUSEOUT1(type1, obj1)					\
+	do {								\
+		*(struct fuse_out_header *) bytes_out			\
+			= (struct fuse_out_header) {			\
+			.len = sizeof(struct fuse_out_header)		\
+				+ sizeof(struct type1),			\
+			.unique = ((struct fuse_in_header *)		\
+				   bytes_in)->unique,			\
+		};							\
+		*(struct type1 *) (bytes_out				\
+			+ sizeof(struct fuse_out_header))		\
+			= obj1;						\
+		TESTEQUAL(write(fuse_dev, bytes_out,			\
+			((struct fuse_out_header *)bytes_out)->len),	\
+			((struct fuse_out_header *)bytes_out)->len);	\
+	} while (false)
+
+#define TESTFUSEOUT2(type1, obj1, type2, obj2)				\
+	do {								\
+		*(struct fuse_out_header *) bytes_out			\
+			= (struct fuse_out_header) {			\
+			.len = sizeof(struct fuse_out_header)		\
+				+ sizeof(struct type1)			\
+				+ sizeof(struct type2),			\
+			.unique = ((struct fuse_in_header *)		\
+				   bytes_in)->unique,			\
+		};							\
+		*(struct type1 *) (bytes_out				\
+			+ sizeof(struct fuse_out_header))		\
+			= obj1;						\
+		*(struct type2 *) (bytes_out				\
+			+ sizeof(struct fuse_out_header)		\
+			+ sizeof(struct type1))				\
+			= obj2;						\
+		TESTEQUAL(write(fuse_dev, bytes_out,			\
+			((struct fuse_out_header *)bytes_out)->len),	\
+			((struct fuse_out_header *)bytes_out)->len);	\
+	} while (false)
+
+#define TESTFUSEINITFLAGS(fuse_connection_flags)			\
+	do {								\
+		DECL_FUSE_IN(init);					\
+									\
+		TESTFUSEIN(FUSE_INIT, init_in);				\
+		TESTEQUAL(init_in->major, FUSE_KERNEL_VERSION);		\
+		TESTEQUAL(init_in->minor, FUSE_KERNEL_MINOR_VERSION);	\
+		TESTFUSEOUT1(fuse_init_out, ((struct fuse_init_out) {	\
+			.major = FUSE_KERNEL_VERSION,			\
+			.minor = FUSE_KERNEL_MINOR_VERSION,		\
+			.max_readahead = 4096,				\
+			.flags = fuse_connection_flags,			\
+			.max_background = 0,				\
+			.congestion_threshold = 0,			\
+			.max_write = 4096,				\
+			.time_gran = 1000,				\
+			.max_pages = 12,				\
+			.map_alignment = 4096,				\
+		}));							\
+	} while (false)
+
+#define TESTFUSEINIT()							\
+	TESTFUSEINITFLAGS(0)
+
+#define DECL_FUSE_IN(name)						\
+	struct fuse_##name##_in *name##_in =				\
+		(struct fuse_##name##_in *)				\
+		(bytes_in + sizeof(struct fuse_in_header))
+
+#define DECL_FUSE(name)							\
+	struct fuse_##name##_in *name##_in __attribute__((unused));	\
+	struct fuse_##name##_out *name##_out __attribute__((unused))
+
+#define FUSE_ACTION	TEST(pid = fork(), pid != -1);			\
+			if (pid) {
+
+#define FUSE_DAEMON	} else {					\
+				uint8_t bytes_in[FUSE_MIN_READ_BUFFER]	\
+					__attribute__((unused));	\
+				uint8_t bytes_out[FUSE_MIN_READ_BUFFER]	\
+					__attribute__((unused));
+
+#define FUSE_DONE		exit(TEST_SUCCESS);			\
+			}						\
+			TESTEQUAL(waitpid(pid, &status, 0), pid);	\
+			TESTEQUAL(status, TEST_SUCCESS);
+
+struct map_relocation {
+	char *name;
+	int fd;
+	int value;
+};
+
+int mount_fuse(const char *mount_dir, int bpf_fd, int dir_fd,
+	       int *fuse_dev_ptr);
+int mount_fuse_no_init(const char *mount_dir, int bpf_fd, int dir_fd,
+	       int *fuse_dev_ptr);
+int install_elf_bpf(const char *file, const char *section, int *fd,
+		    struct map_relocation **map_relocations, size_t *map_count);
+int install_elf_bpf_invalid(const char *file, const char *section, int *fd,
+		    struct map_relocation **map_relocations, size_t *map_count);
+#endif
-- 
2.37.3.998.g577e59143f-goog

Re: [PATCH 02/26] bpf: verifier: Allow single packet invalidation

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2013 bytes --]

Hi Daniel,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on bf682942cd26ce9cd5e87f73ae099b383041e782]

url:    https://github.com/intel-lab-lkp/linux/commits/Daniel-Rosenberg/FUSE-BPF-A-Stacked-Filesystem-Extension-for-FUSE/20220927-095052
base:   bf682942cd26ce9cd5e87f73ae099b383041e782
config: m68k-allyesconfig
compiler: m68k-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/2be5946421bc5b6135b701f5362e0b591836ecc1
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Daniel-Rosenberg/FUSE-BPF-A-Stacked-Filesystem-Extension-for-FUSE/20220927-095052
        git checkout 2be5946421bc5b6135b701f5362e0b591836ecc1
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=m68k SHELL=/bin/bash kernel/bpf/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   kernel/bpf/core.c:1623:12: warning: no previous prototype for 'bpf_probe_read_kernel' [-Wmissing-prototypes]
    1623 | u64 __weak bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr)
         |            ^~~~~~~~~~~~~~~~~~~~~
>> kernel/bpf/core.c:2688:13: warning: no previous prototype for 'bpf_helper_changes_one_pkt_data' [-Wmissing-prototypes]
    2688 | bool __weak bpf_helper_changes_one_pkt_data(void *func)
         |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


vim +/bpf_helper_changes_one_pkt_data +2688 kernel/bpf/core.c

  2687	
> 2688	bool __weak bpf_helper_changes_one_pkt_data(void *func)
  2689	{
  2690		return false;
  2691	}
  2692	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 279523 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/m68k 6.0.0-rc6 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="m68k-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LEGACY_TIMER_TICK=y
CONFIG_TIME_KUNIT_TEST=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

CONFIG_BPF=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_USERMODE_DRIVER=y
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_TASKS_TRACE_RCU_READ_MB=y
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_CGROUP_FAVOR_DYNMODS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
CONFIG_BOOT_CONFIG_EMBED=y
CONFIG_BOOT_CONFIG_EMBED_FILE=""
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
CONFIG_EMBEDDED=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
# end of General setup

CONFIG_M68K=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_LOW_RES=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_HZ=100
CONFIG_PGTABLE_LEVELS=3
CONFIG_MMU=y
CONFIG_MMU_MOTOROLA=y
CONFIG_KEXEC=y
CONFIG_BOOTINFO_PROC=y

#
# Platform setup
#

#
# Processor Type
#
CONFIG_M68KCLASSIC=y
# CONFIG_COLDFIRE is not set
CONFIG_M68020=y
CONFIG_M68030=y
CONFIG_M68040=y
CONFIG_M68060=y

#
# Processor Specific Options
#
CONFIG_M68KFPU_EMU=y
CONFIG_M68KFPU_EMU_EXTRAPREC=y
CONFIG_M68KFPU_EMU_ONLY=y
CONFIG_ADVANCED=y
CONFIG_RMW_INSNS=y
CONFIG_SINGLE_MEMORY_CHUNK=y
CONFIG_060_WRITETHROUGH=y
CONFIG_M68K_L2_CACHE=y
CONFIG_CPU_HAS_ADDRESS_SPACES=y
CONFIG_FPU=y

#
# Machine Types
#
CONFIG_AMIGA=y
CONFIG_ATARI=y
CONFIG_ATARI_KBD_CORE=y
CONFIG_MAC=y
CONFIG_APOLLO=y
CONFIG_VME=y
CONFIG_MVME147=y
CONFIG_MVME16x=y
CONFIG_BVME6000=y
CONFIG_HP300=y
CONFIG_SUN3X=y
CONFIG_Q40=y
CONFIG_VIRT=y

#
# Bus Support
#
CONFIG_DIO=y
CONFIG_NUBUS=y
CONFIG_ZORRO=y
CONFIG_AMIGA_PCMCIA=y
CONFIG_ISA=y
CONFIG_ATARI_ROM_ISA=y
CONFIG_ZORRO_NAMES=y
# end of Platform setup

#
# Kernel Features
#
# end of Kernel Features

#
# Platform devices
#
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
CONFIG_NATFEAT=y
CONFIG_NFBLOCK=y
CONFIG_NFCON=y
CONFIG_NFETH=y
CONFIG_ATARI_ETHERNAT=y
CONFIG_ATARI_ETHERNEC=y
# end of Platform devices

#
# Character devices
#
CONFIG_ATARI_DSP56K=y
CONFIG_AMIGA_BUILTIN_SERIAL=y
CONFIG_HPDCA=y
CONFIG_HPAPCI=y
CONFIG_SERIAL_CONSOLE=y
# end of Character devices

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_MMU_GATHER_NO_RANGE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ALTERNATE_USER_ADDRESS_SPACE=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_ARCH_NVRAM_OPS=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_NO_PREEMPT=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_HAVE_ARCH_PFN_VALID=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# end of GCOV-based kernel profiling
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
CONFIG_MODULE_SIG_ALL=y
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_DEV_THROTTLING_LOW=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_BLK_CGROUP_FC_APPID=y
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_CGROUP_IOPRIO=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
# end of Partition Types

CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_BFQ_CGROUP_DEBUG=y
# end of IO Schedulers

CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_KUNIT_TEST=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_BINFMT_FLAT_OLD=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLUB_STATS=y
# end of SLAB allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_COMPAT_BRK=y
CONFIG_FLATMEM=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_HMM_MIRROR=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
CONFIG_ANON_VMA_NAME=y
CONFIG_USERFAULTFD=y

#
# Data Access Monitoring
#
CONFIG_DAMON=y
CONFIG_DAMON_KUNIT_TEST=y
CONFIG_DAMON_VADDR=y
CONFIG_DAMON_PADDR=y
CONFIG_DAMON_VADDR_KUNIT_TEST=y
CONFIG_DAMON_SYSFS=y
CONFIG_DAMON_DBGFS=y
CONFIG_DAMON_DBGFS_KUNIT_TEST=y
CONFIG_DAMON_RECLAIM=y
CONFIG_DAMON_LRU_SORT=y
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=y
CONFIG_TLS=y
CONFIG_TLS_DEVICE=y
CONFIG_TLS_TOE=y
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_INTERFACE=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=y
CONFIG_XFRM_ESP=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XFRM_ESPINTCP=y
CONFIG_SMC=y
CONFIG_SMC_DIAG=y
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_ESP_OFFLOAD=y
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_NV=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
CONFIG_TCP_CONG_DCTCP=y
CONFIG_TCP_CONG_CDG=y
CONFIG_TCP_CONG_BBR=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_DCTCP is not set
# CONFIG_DEFAULT_CDG is not set
# CONFIG_DEFAULT_BBR is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_ESP_OFFLOAD=y
CONFIG_INET6_ESPINTCP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_ILA=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
CONFIG_IPV6_RPL_LWTUNNEL=y
CONFIG_IPV6_IOAM6_LWTUNNEL=y
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=y
CONFIG_MPTCP_IPV6=y
CONFIG_MPTCP_KUNIT_TEST=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_HOOK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NETFILTER_CONNCOUNT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_CT_NETLINK_TIMEOUT=y
CONFIG_NF_CT_NETLINK_HELPER=y
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=y
CONFIG_NFT_CT=y
CONFIG_NFT_FLOW_OFFLOAD=y
CONFIG_NFT_CONNLIMIT=y
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_MASQ=y
CONFIG_NFT_REDIR=y
CONFIG_NFT_NAT=y
CONFIG_NFT_TUNNEL=y
CONFIG_NFT_OBJREF=y
CONFIG_NFT_QUEUE=y
CONFIG_NFT_QUOTA=y
CONFIG_NFT_REJECT=y
CONFIG_NFT_REJECT_INET=y
CONFIG_NFT_COMPAT=y
CONFIG_NFT_HASH=y
CONFIG_NFT_FIB=y
CONFIG_NFT_FIB_INET=y
CONFIG_NFT_XFRM=y
CONFIG_NFT_SOCKET=y
CONFIG_NFT_OSF=y
CONFIG_NFT_TPROXY=y
CONFIG_NFT_SYNPROXY=y
CONFIG_NF_DUP_NETDEV=y
CONFIG_NFT_DUP_NETDEV=y
CONFIG_NFT_FWD_NETDEV=y
CONFIG_NFT_FIB_NETDEV=y
CONFIG_NFT_REJECT_NETDEV=y
CONFIG_NF_FLOW_TABLE_INET=y
CONFIG_NF_FLOW_TABLE=y
CONFIG_NF_FLOW_TABLE_PROCFS=y
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
CONFIG_NETFILTER_XT_SET=y

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_HMARK=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_TPROXY=y
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_BPF=y
CONFIG_NETFILTER_XT_MATCH_CGROUP=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPCOMP=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_IPVS=y
CONFIG_NETFILTER_XT_MATCH_L2TP=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
# end of Core Netfilter Configuration

CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_IPMAC=y
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_FO=y
CONFIG_IP_VS_OVF=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_MH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y
CONFIG_IP_VS_TWOS=y

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TPROXY_IPV4=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NFT_DUP_IPV4=y
CONFIG_NFT_FIB_IPV4=y
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_RPFILTER=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=y
CONFIG_NF_TPROXY_IPV6=y
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=y
CONFIG_NFT_DUP_IPV6=y
CONFIG_NFT_FIB_IPV6=y
CONFIG_NF_DUP_IPV6=y
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RPFILTER=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_SRH=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_TARGET_SYNPROXY=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
CONFIG_IP6_NF_NAT=y
CONFIG_IP6_NF_TARGET_MASQUERADE=y
CONFIG_IP6_NF_TARGET_NPT=y
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=y

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=y
# end of DECnet: Netfilter Configuration

CONFIG_NF_TABLES_BRIDGE=y
CONFIG_NFT_BRIDGE_META=y
CONFIG_NFT_BRIDGE_REJECT=y
CONFIG_NF_CONNTRACK_BRIDGE=y
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_IP6=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
CONFIG_BPFILTER=y
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y
# end of DCCP CCIDs Configuration

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# end of DCCP Kernel Hacking

CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=y
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_MEDIA_IB=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
CONFIG_L2TP_ETH=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE_MRP=y
CONFIG_BRIDGE_CFM=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_AR9331=y
CONFIG_NET_DSA_TAG_BRCM_COMMON=y
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
CONFIG_NET_DSA_TAG_HELLCREEK=y
CONFIG_NET_DSA_TAG_GSWIP=y
CONFIG_NET_DSA_TAG_DSA_COMMON=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_DSA_TAG_KSZ=y
CONFIG_NET_DSA_TAG_OCELOT=y
CONFIG_NET_DSA_TAG_OCELOT_8021Q=y
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_NET_DSA_TAG_RTL4_A=y
CONFIG_NET_DSA_TAG_RTL8_4=y
CONFIG_NET_DSA_TAG_RZN1_A5PSW=y
CONFIG_NET_DSA_TAG_LAN9303=y
CONFIG_NET_DSA_TAG_SJA1105=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_TAG_XRS700X=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_COPS=y
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_6LOWPAN=y
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_NHC=y
CONFIG_6LOWPAN_NHC_DEST=y
CONFIG_6LOWPAN_NHC_FRAGMENT=y
CONFIG_6LOWPAN_NHC_HOP=y
CONFIG_6LOWPAN_NHC_IPV6=y
CONFIG_6LOWPAN_NHC_MOBILITY=y
CONFIG_6LOWPAN_NHC_ROUTING=y
CONFIG_6LOWPAN_NHC_UDP=y
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=y
CONFIG_6LOWPAN_GHC_UDP=y
CONFIG_6LOWPAN_GHC_ICMPV6=y
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=y
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=y
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=y
CONFIG_IEEE802154_6LOWPAN=y
CONFIG_MAC802154=y
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
CONFIG_NET_SCH_ETF=y
CONFIG_NET_SCH_TAPRIO=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
CONFIG_NET_SCH_FQ_PIE=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
# CONFIG_DEFAULT_FQ_CODEL is not set
# CONFIG_DEFAULT_FQ_PIE is not set
# CONFIG_DEFAULT_SFQ is not set
CONFIG_DEFAULT_PFIFO_FAST=y
CONFIG_DEFAULT_NET_SCH="pfifo_fast"

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_EMATCH_CANID=y
CONFIG_NET_EMATCH_IPSET=y
CONFIG_NET_EMATCH_IPT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_SAMPLE=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_ACT_CSUM=y
CONFIG_NET_ACT_MPLS=y
CONFIG_NET_ACT_VLAN=y
CONFIG_NET_ACT_BPF=y
CONFIG_NET_ACT_CONNMARK=y
CONFIG_NET_ACT_CTINFO=y
CONFIG_NET_ACT_SKBMOD=y
CONFIG_NET_ACT_IFE=y
CONFIG_NET_ACT_TUNNEL_KEY=y
CONFIG_NET_ACT_CT=y
CONFIG_NET_ACT_GATE=y
CONFIG_NET_IFE_SKBMARK=y
CONFIG_NET_IFE_SKBPRIO=y
CONFIG_NET_IFE_SKBTCINDEX=y
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=y
CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_OPENVSWITCH_GENEVE=y
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=y
CONFIG_QRTR_SMD=y
CONFIG_QRTR_TUN=y
CONFIG_QRTR_MHI=y
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
CONFIG_NCSI_OEM_CMD_KEEP_PHY=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_HWBM=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
CONFIG_MKISS=y
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
CONFIG_BAYCOM_EPP=y
CONFIG_YAM=y
# end of AX.25 network device drivers

CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
CONFIG_CAN_J1939=y
CONFIG_CAN_ISOTP=y
CONFIG_BT=y
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=y
CONFIG_BT_HIDP=y
CONFIG_BT_HS=y
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=y
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
CONFIG_BT_SELFTEST=y
CONFIG_BT_SELFTEST_ECDH=y
CONFIG_BT_SELFTEST_SMP=y

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=y
CONFIG_BT_BCM=y
CONFIG_BT_RTL=y
CONFIG_BT_QCA=y
CONFIG_BT_MTK=y
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_RTL=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
CONFIG_BT_MRVL_SDIO=y
CONFIG_BT_ATH3K=y
CONFIG_BT_MTKSDIO=y
CONFIG_BT_MTKUART=y
CONFIG_BT_QCOMSMD=y
CONFIG_BT_HCIRSI=y
CONFIG_BT_VIRTIO=y
# end of Bluetooth device drivers

CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_IPV6=y
CONFIG_AF_RXRPC_INJECT_LOSS=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_MCTP_TEST=y
CONFIG_MCTP_FLOWS=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_EXTRA_REGDB_KEYDIR=""
CONFIG_CFG80211_REG_CELLULAR_HINTS=y
CONFIG_CFG80211_REG_RELAX_NO_IR=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_MLME_DEBUG=y
CONFIG_MAC80211_STA_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_OCB_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_PS_DEBUG=y
CONFIG_MAC80211_MPL_DEBUG=y
CONFIG_MAC80211_MPATH_DEBUG=y
CONFIG_MAC80211_MHWMP_DEBUG=y
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
CONFIG_MAC80211_MESH_CSA_DEBUG=y
CONFIG_MAC80211_MESH_PS_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_RDMA=y
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
CONFIG_CEPH_LIB_PRETTYDEBUG=y
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=y
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_SPI=y
CONFIG_NFC_NCI_UART=y
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=y
CONFIG_NFC_SIM=y
CONFIG_NFC_PORT100=y
CONFIG_NFC_VIRTUAL_NCI=y
CONFIG_NFC_FDP=y
CONFIG_NFC_FDP_I2C=y
CONFIG_NFC_PN544=y
CONFIG_NFC_PN544_I2C=y
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_USB=y
CONFIG_NFC_PN533_I2C=y
CONFIG_NFC_PN532_UART=y
CONFIG_NFC_MICROREAD=y
CONFIG_NFC_MICROREAD_I2C=y
CONFIG_NFC_MRVL=y
CONFIG_NFC_MRVL_USB=y
CONFIG_NFC_MRVL_UART=y
CONFIG_NFC_MRVL_I2C=y
CONFIG_NFC_MRVL_SPI=y
CONFIG_NFC_ST21NFCA=y
CONFIG_NFC_ST21NFCA_I2C=y
CONFIG_NFC_ST_NCI=y
CONFIG_NFC_ST_NCI_I2C=y
CONFIG_NFC_ST_NCI_SPI=y
CONFIG_NFC_NXP_NCI=y
CONFIG_NFC_NXP_NCI_I2C=y
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
CONFIG_NFC_S3FWRN82_UART=y
CONFIG_NFC_ST95HF=y
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=y

#
# Device Drivers
#
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y

#
# PC-card bridges
#
CONFIG_I82365=y
CONFIG_TCIC=y
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
CONFIG_FW_UPLOAD=y
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_AC97=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=y
CONFIG_REGMAP_SOUNDWIRE_MBQ=y
CONFIG_REGMAP_SCCB=y
CONFIG_REGMAP_I3C=y
CONFIG_REGMAP_SPI_AVMM=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_ARM_INTEGRATOR_LM=y
CONFIG_BT1_APB=y
CONFIG_BT1_AXI=y
CONFIG_MOXTET=y
CONFIG_HISILICON_LPC=y
CONFIG_INTEL_IXP4XX_EB=y
CONFIG_QCOM_EBI2=y
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_EP=y
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=y
CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
CONFIG_ARM_SCMI_HAVE_SHMEM=y
CONFIG_ARM_SCMI_HAVE_MSG=y
CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_VERSION1_COMPLIANCE=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE=y
CONFIG_ARM_SCMI_POWER_DOMAIN=y
CONFIG_ARM_SCMI_POWER_CONTROL=y
# end of ARM System Control and Management Interface Protocol

CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_ARM_SCPI_POWER_DOMAIN=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_MTK_ADSP_IPC=y
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT=y
CONFIG_TURRIS_MOX_RWTM=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
CONFIG_TEE_BNXT_FW=y
CONFIG_CS_DSP=y
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=y
CONFIG_GOOGLE_MEMCONSOLE=y
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=y
CONFIG_GOOGLE_VPD=y
CONFIG_IMX_DSP=y
CONFIG_IMX_SCU=y
CONFIG_IMX_SCU_PD=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
CONFIG_GNSS_USB=y
CONFIG_MTD=y
CONFIG_MTD_TESTS=m

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_BCM63XX_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_OF_PARTS_BCM4908=y
CONFIG_MTD_OF_PARTS_LINKSYS_NS=y
CONFIG_MTD_PARSER_IMAGETAG=y
CONFIG_MTD_PARSER_TRX=y
CONFIG_MTD_SHARPSL_PARTS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_QCOMSMEM_PARTS=y
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_PSTORE=y
CONFIG_MTD_SWAP=y
CONFIG_MTD_PARTITIONED_MASTER=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP_BT1_ROM=y
CONFIG_MTD_PHYSMAP_VERSATILE=y
CONFIG_MTD_PHYSMAP_GEMINI=y
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
CONFIG_MTD_SC520CDP=y
CONFIG_MTD_NETSC520=y
CONFIG_MTD_TS5500=y
CONFIG_MTD_PCMCIA=y
CONFIG_MTD_PCMCIA_ANONYMOUS=y
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_MCHP23K256=y
CONFIG_MTD_MCHP48L640=y
CONFIG_MTD_SPEAR_SMI=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_SAMSUNG=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_RAW_NAND=y

#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_AMS_DELTA=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_NAND_OMAP_BCH_BUILD=y
CONFIG_MTD_NAND_SHARPSL=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_NAND_SLC_LPC32XX=y
CONFIG_MTD_NAND_MLC_LPC32XX=y
CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_NAND_BRCMNAND_BCMA=y
CONFIG_MTD_NAND_BCM47XXNFLASH=y
CONFIG_MTD_NAND_OXNAS=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_MTD_NAND_VF610_NFC=y
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_NAND_SH_FLCTL=y
CONFIG_MTD_NAND_DAVINCI=y
CONFIG_MTD_NAND_TXX9NDFMC=y
CONFIG_MTD_NAND_JZ4780=y
CONFIG_MTD_NAND_INGENIC_ECC=y
CONFIG_MTD_NAND_JZ4740_ECC=y
CONFIG_MTD_NAND_JZ4725B_BCH=y
CONFIG_MTD_NAND_JZ4780_BCH=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_MTD_NAND_SUNXI=y
CONFIG_MTD_NAND_HISI504=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_NAND_MTK=y
CONFIG_MTD_NAND_MXIC=y
CONFIG_MTD_NAND_TEGRA=y
CONFIG_MTD_NAND_STM32_FMC2=y
CONFIG_MTD_NAND_MESON=y
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_CADENCE=y
CONFIG_MTD_NAND_ARASAN=y
CONFIG_MTD_NAND_INTEL_LGM=y
CONFIG_MTD_NAND_RENESAS=y

#
# Misc
#
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_SPI_NAND=y

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_ECC_MXIC=y
CONFIG_MTD_NAND_ECC_MEDIATEK=y
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
CONFIG_SPI_HISI_SFC=y
CONFIG_SPI_NXP_SPIFI=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_HYPERBUS=y
CONFIG_HBMC_AM654=y
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_ALL_DTBS=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=y
CONFIG_PARPORT_AMIGA=y
CONFIG_PARPORT_MFC3=y
CONFIG_PARPORT_ATARI=y
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
CONFIG_AMIGA_FLOPPY=y
CONFIG_ATARI_FLOPPY=y
CONFIG_BLK_DEV_SWIM=y
CONFIG_AMIGA_Z2RAM=y
CONFIG_CDROM=y
CONFIG_PARIDE=y

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=y
CONFIG_PARIDE_PCD=y
CONFIG_PARIDE_PF=y
CONFIG_PARIDE_PT=y
CONFIG_PARIDE_PG=y

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=y
CONFIG_PARIDE_BPCK=y
CONFIG_PARIDE_BPCK6=y
CONFIG_PARIDE_COMM=y
CONFIG_PARIDE_DSTR=y
CONFIG_PARIDE_FIT2=y
CONFIG_PARIDE_FIT3=y
CONFIG_PARIDE_EPAT=y
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=y
CONFIG_PARIDE_FRIQ=y
CONFIG_PARIDE_FRPW=y
CONFIG_PARIDE_KBIC=y
CONFIG_PARIDE_KTTI=y
CONFIG_PARIDE_ON20=y
CONFIG_PARIDE_ON26=y
CONFIG_ZRAM=y
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZO is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
# CONFIG_ZRAM_DEF_COMP_842 is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
CONFIG_ZRAM_WRITEBACK=y
CONFIG_ZRAM_MEMORY_TRACKING=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_DRBD=y
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_RBD=y
CONFIG_BLK_DEV_UBLK=y
CONFIG_BLK_DEV_RNBD=y
CONFIG_BLK_DEV_RNBD_CLIENT=y
CONFIG_BLK_DEV_RNBD_SERVER=y

#
# NVME Support
#
CONFIG_NVME_COMMON=y
CONFIG_NVME_CORE=y
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_VERBOSE_ERRORS=y
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_RDMA=y
CONFIG_NVME_FC=y
CONFIG_NVME_TCP=y
CONFIG_NVME_AUTH=y
CONFIG_NVME_APPLE=y
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_RDMA=y
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=y
CONFIG_NVME_TARGET_TCP=y
CONFIG_NVME_TARGET_AUTH=y
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_GEHC_ACHC=y
CONFIG_HI6421V600_IRQ=y
CONFIG_QCOM_COINCELL=y
CONFIG_QCOM_FASTRPC=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_LATTICE_ECP3_CONFIG=y
CONFIG_SRAM=y
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_HISI_HIKEY_USB=y
CONFIG_OPEN_DICE=y
CONFIG_VCPU_STALL_DETECTOR=y
CONFIG_C2PORT=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_SPI=y
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
CONFIG_ECHO=y
CONFIG_MISC_RTSX_USB=y
CONFIG_UACCE=y
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=y
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_ESP_PIO=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_AHA152X=y
CONFIG_SCSI_HISI_SAS=y
CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_SCSI_FDOMAIN=y
CONFIG_SCSI_FDOMAIN_ISA=y
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_53C700_BE_BUS=y
CONFIG_SCSI_QLOGIC_FAS=y
CONFIG_SCSI_DEBUG=y
CONFIG_A3000_SCSI=y
CONFIG_A2091_SCSI=y
CONFIG_GVP11_SCSI=y
CONFIG_SCSI_A4000T=y
CONFIG_SCSI_ZORRO7XX=y
CONFIG_SCSI_ZORRO_ESP=y
CONFIG_ATARI_SCSI=y
CONFIG_MAC_SCSI=y
CONFIG_SCSI_MAC_ESP=y
CONFIG_MVME147_SCSI=y
CONFIG_MVME16x_SCSI=y
CONFIG_BVME6000_SCSI=y
CONFIG_SUN3X_ESP=y
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

CONFIG_HAVE_PATA_PLATFORM=y
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_BRCM=y
CONFIG_AHCI_DA850=y
CONFIG_AHCI_DM816=y
CONFIG_AHCI_IMX=y
CONFIG_AHCI_CEVA=y
CONFIG_AHCI_MTK=y
CONFIG_AHCI_MVEBU=y
CONFIG_AHCI_SUNXI=y
CONFIG_AHCI_TEGRA=y
CONFIG_AHCI_XGENE=y
CONFIG_AHCI_QORIQ=y
CONFIG_SATA_FSL=y
CONFIG_SATA_GEMINI=y
CONFIG_SATA_AHCI_SEATTLE=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_SATA_DWC=y
CONFIG_SATA_DWC_OLD_DMA=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
CONFIG_SATA_RCAR=y

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ARASAN_CF=y
CONFIG_PATA_BK3710=y
CONFIG_PATA_FTIDE010=y
CONFIG_PATA_IMX=y
CONFIG_PATA_PXA=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_FALCON=y
CONFIG_PATA_GAYLE=y
CONFIG_PATA_BUDDHA=y
CONFIG_PATA_ISAPNP=y
CONFIG_PATA_IXP4XX_CF=y
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_PATA_QDI=y
CONFIG_PATA_SAMSUNG_CF=y
CONFIG_PATA_WINBOND_VLB=y

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_MD_CLUSTER=y
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BCACHE_ASYNC_REGISTRATION=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_UNSTRIPED=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
CONFIG_DM_CACHE=y
CONFIG_DM_CACHE_SMQ=y
CONFIG_DM_WRITECACHE=y
CONFIG_DM_EBS=y
CONFIG_DM_ERA=y
CONFIG_DM_CLONE=y
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_RAID=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
CONFIG_DM_MULTIPATH_HST=y
CONFIG_DM_MULTIPATH_IOA=y
CONFIG_DM_DELAY=y
CONFIG_DM_DUST=y
CONFIG_DM_INIT=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
CONFIG_DM_VERITY=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING=y
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=y
CONFIG_DM_LOG_WRITES=y
CONFIG_DM_INTEGRITY=y
CONFIG_DM_ZONED=y
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
CONFIG_TCM_USER2=y
CONFIG_LOOPBACK_TARGET=y
CONFIG_TCM_FC=y
CONFIG_ISCSI_TARGET=y
CONFIG_SBP_TARGET=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
CONFIG_ADB_MACII=y
CONFIG_ADB_IOP=y
CONFIG_ADB_CUDA=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_EVENT=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
CONFIG_DUMMY=y
CONFIG_WIREGUARD=y
CONFIG_WIREGUARD_DEBUG=y
CONFIG_EQUALIZER=y
CONFIG_IFB=y
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_BROADCAST=y
CONFIG_NET_TEAM_MODE_ROUNDROBIN=y
CONFIG_NET_TEAM_MODE_RANDOM=y
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
CONFIG_NET_TEAM_MODE_LOADBALANCE=y
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=y
CONFIG_IPVTAP=y
CONFIG_VXLAN=y
CONFIG_GENEVE=y
CONFIG_BAREUDP=y
CONFIG_GTP=y
CONFIG_AMT=y
CONFIG_MACSEC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
CONFIG_TAP=y
CONFIG_TUN_VNET_CROSS_LE=y
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
CONFIG_NET_VRF=y
CONFIG_VSOCKMON=y
CONFIG_MHI_NET=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_ISA=y
CONFIG_ARCNET_COM20020_CS=y
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
CONFIG_CAIF_DRIVERS=y
CONFIG_CAIF_TTY=y
CONFIG_CAIF_VIRTIO=y

#
# Distributed Switch Architecture drivers
#
CONFIG_B53=y
CONFIG_B53_SPI_DRIVER=y
CONFIG_B53_MDIO_DRIVER=y
CONFIG_B53_MMAP_DRIVER=y
CONFIG_B53_SRAB_DRIVER=y
CONFIG_B53_SERDES=y
CONFIG_NET_DSA_BCM_SF2=y
CONFIG_NET_DSA_LOOP=y
CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK=y
CONFIG_NET_DSA_LANTIQ_GSWIP=y
CONFIG_NET_DSA_MT7530=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=y
CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=y
CONFIG_NET_DSA_MICROCHIP_KSZ_SPI=y
CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_MSCC_SEVILLE=y
CONFIG_NET_DSA_AR9331=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_SJA1105=y
CONFIG_NET_DSA_SJA1105_PTP=y
CONFIG_NET_DSA_SJA1105_TAS=y
CONFIG_NET_DSA_SJA1105_VL=y
CONFIG_NET_DSA_XRS700X=y
CONFIG_NET_DSA_XRS700X_I2C=y
CONFIG_NET_DSA_XRS700X_MDIO=y
CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_MDIO=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8365MB=y
CONFIG_NET_DSA_REALTEK_RTL8366RB=y
CONFIG_NET_DSA_SMSC_LAN9303=y
CONFIG_NET_DSA_SMSC_LAN9303_I2C=y
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=y
CONFIG_NET_DSA_VITESSE_VSC73XX=y
CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=y
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=y
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL3=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_3C589=y
CONFIG_NET_VENDOR_ACTIONS=y
CONFIG_OWL_EMAC=y
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_ALTERA_TSE=y
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
CONFIG_A2065=y
CONFIG_ARIADNE=y
CONFIG_ATARILANCE=y
CONFIG_HPLANCE=y
CONFIG_MVME147_NET=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_SUN3LANCE=y
CONFIG_AMD_XGBE=y
CONFIG_AMD_XGBE_DCB=y
CONFIG_NET_XGENE=y
CONFIG_NET_XGENE_V2=y
CONFIG_NET_VENDOR_APPLE=y
CONFIG_MACMACE=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_ARC_EMAC_CORE=y
CONFIG_ARC_EMAC=y
CONFIG_EMAC_ROCKCHIP=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_SPI_AX88796C=y
CONFIG_SPI_AX88796C_COMPRESSION=y
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_BCM4908_ENET=y
CONFIG_BCMGENET=y
CONFIG_BGMAC=y
CONFIG_BGMAC_BCMA=y
CONFIG_BGMAC_PLATFORM=y
CONFIG_SYSTEMPORT=y
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=y
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_CS89x0=y
CONFIG_CS89x0_PLATFORM=y
CONFIG_EP93XX_ETH=y
CONFIG_MAC89x0=y
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_GEMINI_ETHERNET=y
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_DM9000=y
CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
CONFIG_DM9051=y
CONFIG_DNET=y
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_TSNEP=y
CONFIG_TSNEP_SELFTESTS=y
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_FARADAY=y
CONFIG_FTMAC100=y
CONFIG_FTGMAC100=y
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FEC=y
CONFIG_FSL_FMAN=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_FSL_XGMAC_MDIO=y
CONFIG_GIANFAR=y
CONFIG_FSL_DPAA2_SWITCH=y
CONFIG_FSL_ENETC_IERB=y
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HISILICON=y
CONFIG_HIX5HD2_GMAC=y
CONFIG_HISI_FEMAC=y
CONFIG_HIP04_ETH=y
CONFIG_HI13X1_GMAC=y
CONFIG_HNS_MDIO=y
CONFIG_HNS=y
CONFIG_HNS_DSAF=y
CONFIG_HNS_ENET=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_BVME6000_NET=y
CONFIG_MVME16x_NET=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_WANGXUN=y
CONFIG_KORINA=y
CONFIG_NET_VENDOR_LITEX=y
CONFIG_LITEX_LITEETH=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MV643XX_ETH=y
CONFIG_MVMDIO=y
CONFIG_MVNETA_BM_ENABLE=y
CONFIG_MVNETA=y
CONFIG_MVNETA_BM=y
CONFIG_MVPP2=y
CONFIG_MVPP2_PTP=y
CONFIG_PXA168_ETH=y
CONFIG_PRESTERA=y
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NET_MEDIATEK_SOC_WED=y
CONFIG_NET_MEDIATEK_SOC=y
CONFIG_NET_MEDIATEK_STAR_EMAC=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLXSW_CORE=y
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_I2C=y
CONFIG_MLXSW_MINIMAL=y
CONFIG_MLXFW=y
CONFIG_MLXBF_GIGE=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=y
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_ENCX24J600=y
CONFIG_LAN966X_SWITCH=y
CONFIG_SPARX5_SWITCH=y
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH_LIB=y
CONFIG_MSCC_OCELOT_SWITCH=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_NI=y
CONFIG_NI_XGE_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_MACSONIC=y
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=y
CONFIG_AX88796=y
CONFIG_AX88796_93CX6=y
CONFIG_XSURF100=y
CONFIG_HYDRA=y
CONFIG_MAC8390=y
CONFIG_NE2000=y
CONFIG_APNE=y
CONFIG_PCMCIA_PCNET=y
CONFIG_ULTRA=y
CONFIG_WD80x3=y
CONFIG_ZORRO8390=y
CONFIG_LPC_ENET=y
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000=y
CONFIG_QCA7000_SPI=y
CONFIG_QCA7000_UART=y
CONFIG_QCOM_EMAC=y
CONFIG_RMNET=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_SH_ETH=y
CONFIG_RAVB=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=y
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC9194=y
CONFIG_SMC91X=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_SMC911X=y
CONFIG_SMSC911X=y
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_SNI_AVE=y
CONFIG_SNI_NETSEC=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_SELFTESTS=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_DWMAC_DWC_QOS_ETH=y
CONFIG_DWMAC_GENERIC=y
CONFIG_DWMAC_ANARION=y
CONFIG_DWMAC_INGENIC=y
CONFIG_DWMAC_IPQ806X=y
CONFIG_DWMAC_LPC18XX=y
CONFIG_DWMAC_MEDIATEK=y
CONFIG_DWMAC_MESON=y
CONFIG_DWMAC_OXNAS=y
CONFIG_DWMAC_QCOM_ETHQOS=y
CONFIG_DWMAC_ROCKCHIP=y
CONFIG_DWMAC_SOCFPGA=y
CONFIG_DWMAC_STI=y
CONFIG_DWMAC_STM32=y
CONFIG_DWMAC_SUNXI=y
CONFIG_DWMAC_SUN8I=y
CONFIG_DWMAC_IMX8=y
CONFIG_DWMAC_INTEL_PLAT=y
CONFIG_DWMAC_VISCONTI=y
CONFIG_NET_VENDOR_SUNPLUS=y
CONFIG_SP7021_EMAC=y
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_DWC_XLGMAC=y
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_MSE102X=y
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=y
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=y
CONFIG_WIZNET_W5300=y
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_WIZNET_W5100_SPI=y
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=y
CONFIG_XILINX_AXI_EMAC=y
CONFIG_XILINX_LL_TEMAC=y
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_QCOM_IPA=y
CONFIG_NET_SB1000=y
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_SFP=y

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=y
CONFIG_MESON_GXL_PHY=y
CONFIG_ADIN_PHY=y
CONFIG_ADIN1100_PHY=y
CONFIG_AQUANTIA_PHY=y
CONFIG_AX88796B_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM54140_PHY=y
CONFIG_BCM63XX_PHY=y
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM84881_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_BCM_CYGNUS_PHY=y
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BCM_NET_PHYPTP=y
CONFIG_CICADA_PHY=y
CONFIG_CORTINA_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_LXT_PHY=y
CONFIG_INTEL_XWAY_PHY=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_MARVELL_10G_PHY=y
CONFIG_MARVELL_88X2222_PHY=y
CONFIG_MAXLINEAR_GPHY=y
CONFIG_MEDIATEK_GE_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_MICROCHIP_PHY=y
CONFIG_MICROCHIP_T1_PHY=y
CONFIG_MICROSEMI_PHY=y
CONFIG_MOTORCOMM_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_NXP_C45_TJA11XX_PHY=y
CONFIG_NXP_TJA11XX_PHY=y
CONFIG_AT803X_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_RENESAS_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_STE10XP=y
CONFIG_TERANETICS_PHY=y
CONFIG_DP83822_PHY=y
CONFIG_DP83TC811_PHY=y
CONFIG_DP83848_PHY=y
CONFIG_DP83867_PHY=y
CONFIG_DP83869_PHY=y
CONFIG_DP83TD510_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_XILINX_GMII2RGMII=y
CONFIG_MICREL_KS8995MA=y
CONFIG_CAN_DEV=y
CONFIG_CAN_VCAN=y
CONFIG_CAN_VXCAN=y
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_RX_OFFLOAD=y
CONFIG_CAN_AT91=y
CONFIG_CAN_CAN327=y
CONFIG_CAN_FLEXCAN=y
CONFIG_CAN_GRCAN=y
CONFIG_CAN_SLCAN=y
CONFIG_CAN_SUN4I=y
CONFIG_CAN_XILINXCAN=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_CC770=y
CONFIG_CAN_CC770_ISA=y
CONFIG_CAN_CC770_PLATFORM=y
CONFIG_CAN_CTUCANFD=y
CONFIG_CAN_CTUCANFD_PLATFORM=y
CONFIG_CAN_IFI_CANFD=y
CONFIG_CAN_M_CAN=y
CONFIG_CAN_M_CAN_PLATFORM=y
CONFIG_CAN_M_CAN_TCAN4X5X=y
CONFIG_CAN_RCAR=y
CONFIG_CAN_RCAR_CANFD=y
CONFIG_CAN_SJA1000=y
CONFIG_CAN_EMS_PCMCIA=y
CONFIG_CAN_SJA1000_ISA=y
CONFIG_CAN_SJA1000_PLATFORM=y
CONFIG_CAN_TSCAN1=y
CONFIG_CAN_SOFTING=y
CONFIG_CAN_SOFTING_CS=y

#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=y
CONFIG_CAN_MCP251X=y
CONFIG_CAN_MCP251XFD=y
CONFIG_CAN_MCP251XFD_SANITY=y
# end of CAN SPI interfaces

#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=y
CONFIG_CAN_EMS_USB=y
CONFIG_CAN_ESD_USB=y
CONFIG_CAN_ETAS_ES58X=y
CONFIG_CAN_GS_USB=y
CONFIG_CAN_KVASER_USB=y
CONFIG_CAN_MCBA_USB=y
CONFIG_CAN_PEAK_USB=y
CONFIG_CAN_UCAN=y
# end of CAN USB interfaces

CONFIG_CAN_DEBUG_DEVICES=y

#
# MCTP Device Drivers
#
CONFIG_MCTP_SERIAL=y
CONFIG_MCTP_TRANSPORT_I2C=y
# end of MCTP Device Drivers

CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
CONFIG_MDIO_SUN4I=y
CONFIG_MDIO_XGENE=y
CONFIG_MDIO_ASPEED=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BCM_IPROC=y
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MDIO_CAVIUM=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_HISI_FEMAC=y
CONFIG_MDIO_I2C=y
CONFIG_MDIO_MVUSB=y
CONFIG_MDIO_MSCC_MIIM=y
CONFIG_MDIO_MOXART=y
CONFIG_MDIO_OCTEON=y
CONFIG_MDIO_IPQ4019=y
CONFIG_MDIO_IPQ8064=y

#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_MESON_G12A=y
CONFIG_MDIO_BUS_MUX_BCM6368=y
CONFIG_MDIO_BUS_MUX_BCM_IPROC=y
CONFIG_MDIO_BUS_MUX_GPIO=y
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y

#
# PCS device drivers
#
CONFIG_PCS_XPCS=y
CONFIG_PCS_LYNX=y
CONFIG_PCS_RZN1_MIIC=y
# end of PCS device drivers

CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=y
CONFIG_PPPOE=y
CONFIG_PPTP=y
CONFIG_PPPOL2TP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=y
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_HUAWEI_CDC_NCM=y
CONFIG_USB_NET_CDC_MBIM=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SR9700=y
CONFIG_USB_NET_SR9800=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=y
CONFIG_USB_NET_KALMIA=y
CONFIG_USB_NET_QMI_WWAN=y
CONFIG_USB_HSO=y
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_CDC_PHONET=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=y
CONFIG_USB_NET_CH9200=y
CONFIG_USB_NET_AQC111=y
CONFIG_USB_RTL8153_ECM=y
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ATH_COMMON=y
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH_DEBUG=y
CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS=y
CONFIG_ATH_REG_DYNAMIC_USER_CERT_TESTING=y
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_DFS_DEBUGFS=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_STATION_STATISTICS=y
CONFIG_ATH9K_TX99=y
CONFIG_ATH9K_DFS_CERTIFIED=y
CONFIG_ATH9K_DYNACK=y
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_HTC=y
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_ATH9K_HWRNG=y
CONFIG_ATH9K_COMMON_SPECTRAL=y
CONFIG_CARL9170=y
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_DEBUGFS=y
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=y
CONFIG_ATH6KL_SDIO=y
CONFIG_ATH6KL_USB=y
CONFIG_ATH6KL_DEBUG=y
CONFIG_ATH6KL_REGDOMAIN=y
CONFIG_AR5523=y
CONFIG_ATH10K=y
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_SDIO=y
CONFIG_ATH10K_USB=y
CONFIG_ATH10K_SNOC=y
CONFIG_ATH10K_DEBUG=y
CONFIG_ATH10K_DEBUGFS=y
CONFIG_ATH10K_SPECTRAL=y
CONFIG_ATH10K_DFS_CERTIFIED=y
CONFIG_WCN36XX=y
CONFIG_WCN36XX_DEBUGFS=y
CONFIG_ATH11K=y
CONFIG_ATH11K_AHB=y
CONFIG_ATH11K_DEBUG=y
CONFIG_ATH11K_DEBUGFS=y
CONFIG_ATH11K_SPECTRAL=y
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_ATMEL=y
CONFIG_PCMCIA_ATMEL=y
CONFIG_AT76C50X_USB=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=y
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=y
CONFIG_BRCMSMAC=y
CONFIG_BRCMSMAC_LEDS=y
CONFIG_BRCMFMAC=y
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCM_TRACING=y
CONFIG_BRCMDBG=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_AIRO_CS=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_CS=y
CONFIG_HERMES=y
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_ORINOCO_USB=y
CONFIG_P54_COMMON=y
CONFIG_P54_USB=y
CONFIG_P54_SPI=y
CONFIG_P54_SPI_DEFAULT_EEPROM=y
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_LIBERTAS_SPI=y
CONFIG_LIBERTAS_DEBUG=y
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=y
CONFIG_LIBERTAS_THINFIRM_DEBUG=y
CONFIG_LIBERTAS_THINFIRM_USB=y
CONFIG_MWIFIEX=y
CONFIG_MWIFIEX_SDIO=y
CONFIG_MWIFIEX_USB=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=y
CONFIG_MT76_CORE=y
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=y
CONFIG_MT76_SDIO=y
CONFIG_MT76x02_LIB=y
CONFIG_MT76x02_USB=y
CONFIG_MT76_CONNAC_LIB=y
CONFIG_MT76x0_COMMON=y
CONFIG_MT76x0U=y
CONFIG_MT76x2_COMMON=y
CONFIG_MT76x2U=y
CONFIG_MT7615_COMMON=y
CONFIG_MT7663_USB_SDIO_COMMON=y
CONFIG_MT7663U=y
CONFIG_MT7663S=y
CONFIG_MT7921_COMMON=y
CONFIG_MT7921S=y
CONFIG_MT7921U=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WILC1000=y
CONFIG_WILC1000_SDIO=y
CONFIG_WILC1000_SPI=y
CONFIG_WILC1000_HW_OOB_INTR=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_PLFXLC=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=y
CONFIG_RT2500USB=y
CONFIG_RT73USB=y
CONFIG_RT2800USB=y
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=y
CONFIG_RT2X00_LIB_USB=y
CONFIG_RT2X00_LIB=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
CONFIG_RT2X00_DEBUG=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8187=y
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=y
CONFIG_RTL8192CU=y
CONFIG_RTLWIFI=y
CONFIG_RTLWIFI_USB=y
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=y
CONFIG_RTL8XXXU=y
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_RTW88=y
CONFIG_RTW89=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=y
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=y
CONFIG_RSI_USB=y
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WFX=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=y
CONFIG_CW1200_WLAN_SDIO=y
CONFIG_CW1200_WLAN_SPI=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=y
CONFIG_WL1251_SPI=y
CONFIG_WL1251_SDIO=y
CONFIG_WL12XX=y
CONFIG_WL18XX=y
CONFIG_WLCORE=y
CONFIG_WLCORE_SPI=y
CONFIG_WLCORE_SDIO=y
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=y
CONFIG_ZD1211RW=y
CONFIG_ZD1211RW_DEBUG=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_PCMCIA_WL3501=y
CONFIG_MAC80211_HWSIM=y
CONFIG_USB_NET_RNDIS_WLAN=y
CONFIG_VIRT_WIFI=y
CONFIG_WAN=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_N2=y
CONFIG_C101=y
CONFIG_FSL_UCC_HDLC=y
CONFIG_SLIC_DS26522=y
CONFIG_LAPBETHER=y
CONFIG_IEEE802154_DRIVERS=y
CONFIG_IEEE802154_FAKELB=y
CONFIG_IEEE802154_AT86RF230=y
CONFIG_IEEE802154_MRF24J40=y
CONFIG_IEEE802154_CC2520=y
CONFIG_IEEE802154_ATUSB=y
CONFIG_IEEE802154_ADF7242=y
CONFIG_IEEE802154_CA8210=y
CONFIG_IEEE802154_CA8210_DEBUGFS=y
CONFIG_IEEE802154_MCR20A=y
CONFIG_IEEE802154_HWSIM=y

#
# Wireless WAN
#
CONFIG_WWAN=y
CONFIG_WWAN_DEBUGFS=y
CONFIG_WWAN_HWSIM=y
CONFIG_MHI_WWAN_CTRL=y
CONFIG_MHI_WWAN_MBIM=y
CONFIG_QCOM_BAM_DMUX=y
CONFIG_RPMSG_WWAN_CTRL=y
# end of Wireless WAN

CONFIG_NETDEVSIM=y
CONFIG_NET_FAILOVER=y
CONFIG_NETDEV_LEGACY_INIT=y
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_MISDN=y
CONFIG_MISDN_DSP=y
CONFIG_MISDN_L1OIP=y

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCUSB=y

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_AMIGA=y
CONFIG_KEYBOARD_ATARI=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_CLPS711X=y
CONFIG_KEYBOARD_DLINK_DIR685=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_EP93XX=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_HIL_OLD=y
CONFIG_KEYBOARD_HIL=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_SNVS_PWRKEY=y
CONFIG_KEYBOARD_IMX=y
CONFIG_KEYBOARD_IMX_SC_KEY=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_PMIC8XXX=y
CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_ST_KEYSCAN=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_SH_KEYSC=y
CONFIG_KEYBOARD_STMPE=y
CONFIG_KEYBOARD_IQS62X=y
CONFIG_KEYBOARD_OMAP4=y
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_KEYBOARD_CAP11XX=y
CONFIG_KEYBOARD_BCM=y
CONFIG_KEYBOARD_MT6779=y
CONFIG_KEYBOARD_MTK_PMIC=y
CONFIG_KEYBOARD_CYPRESS_SF=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_INPORT=y
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=y
CONFIG_MOUSE_PC110PAD=y
CONFIG_MOUSE_AMIGA=y
CONFIG_MOUSE_ATARI=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADC=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_AMIGA=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=y
CONFIG_JOYSTICK_PSXPAD_SPI=y
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_JOYSTICK_PXRC=y
CONFIG_JOYSTICK_QWIIC=y
CONFIG_JOYSTICK_FSIA6B=y
CONFIG_JOYSTICK_SENSEHAT=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_PEGASUS=y
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879_SPI=y
CONFIG_TOUCHSCREEN_ADC=y
CONFIG_TOUCHSCREEN_AR1021_I2C=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_BU21029=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
CONFIG_TOUCHSCREEN_CY8CTMA140=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=y
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_EXC3000=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_HIDEEP=y
CONFIG_TOUCHSCREEN_HYCON_HY46XX=y
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_ILITEK=y
CONFIG_TOUCHSCREEN_IPROC=y
CONFIG_TOUCHSCREEN_S6SY761=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MSG2638=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_IMAGIS=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_HTCPEN=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=y
CONFIG_TOUCHSCREEN_MIGOR=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
CONFIG_TOUCHSCREEN_UCB1400=y
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_WM97XX=y
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MXS_LRADC=y
CONFIG_TOUCHSCREEN_MX25=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TS4800=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_TOUCHSCREEN_RM_TS=y
CONFIG_TOUCHSCREEN_SILEAD=y
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMFTS=y
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SUN4I=y
CONFIG_TOUCHSCREEN_SUR40=y
CONFIG_TOUCHSCREEN_SURFACE3_SPI=y
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZET6223=y
CONFIG_TOUCHSCREEN_ZFORCE=y
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
CONFIG_TOUCHSCREEN_IQS5XX=y
CONFIG_TOUCHSCREEN_ZINITIX=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_AD714X_SPI=y
CONFIG_INPUT_ARIEL_PWRBUTTON=y
CONFIG_INPUT_ARIZONA_HAPTICS=y
CONFIG_INPUT_ATC260X_ONKEY=y
CONFIG_INPUT_ATMEL_CAPTOUCH=y
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_E3X0_BUTTON=y
CONFIG_INPUT_PM8941_PWRKEY=y
CONFIG_INPUT_PM8XXX_VIBRATOR=y
CONFIG_INPUT_PMIC8XXX_PWRKEY=y
CONFIG_INPUT_M68K_BEEP=y
CONFIG_INPUT_MAX77650_ONKEY=y
CONFIG_INPUT_MAX77693_HAPTIC=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
CONFIG_INPUT_GPIO_VIBRA=y
CONFIG_INPUT_CPCAP_PWRBUTTON=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_REGULATOR_HAPTIC=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TPS65218_PWRBUTTON=y
CONFIG_INPUT_AXP20X_PEK=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_TWL6040_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_HP_SDC_RTC=y
CONFIG_INPUT_PALMAS_PWRBUTTON=y
CONFIG_INPUT_PCF50633_PMU=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_PWM_BEEPER=y
CONFIG_INPUT_PWM_VIBRA=y
CONFIG_INPUT_RK805_PWRKEY=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA7280_HAPTICS=y
CONFIG_INPUT_DA9052_ONKEY=y
CONFIG_INPUT_DA9055_ONKEY=y
CONFIG_INPUT_DA9063_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_PCAP=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_ADXL34X_SPI=y
CONFIG_INPUT_IMS_PCU=y
CONFIG_INPUT_IQS269A=y
CONFIG_INPUT_IQS626A=y
CONFIG_INPUT_IQS7222=y
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=y
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_INPUT_HISI_POWERKEY=y
CONFIG_INPUT_RAVE_SP_PWRBUTTON=y
CONFIG_INPUT_SC27XX_VIBRA=y
CONFIG_INPUT_STPMIC1_ONKEY=y
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_SPI=y
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_Q40KBD=y
CONFIG_SERIO_PARKBD=y
CONFIG_HP_SDC=y
CONFIG_HIL_MLC=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_OLPC_APSP=y
CONFIG_SERIO_SUN4I_PS2=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_HP300=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_MEN_MCB=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=y
CONFIG_SERIAL_8250_ACCENT=y
CONFIG_SERIAL_8250_ASPEED_VUART=y
CONFIG_SERIAL_8250_BOCA=y
CONFIG_SERIAL_8250_EXAR_ST16C554=y
CONFIG_SERIAL_8250_HUB6=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_8250_IOC3=y
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_OMAP=y
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y
CONFIG_SERIAL_8250_LPC18XX=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_8250_UNIPHIER=y
CONFIG_SERIAL_8250_INGENIC=y
CONFIG_SERIAL_8250_PXA=y
CONFIG_SERIAL_8250_TEGRA=y
CONFIG_SERIAL_8250_BCM7271=y
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
CONFIG_SERIAL_ATMEL_TTYAT=y
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_CLPS711X=y
CONFIG_SERIAL_CLPS711X_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_TEGRA_TCU=y
CONFIG_SERIAL_TEGRA_TCU_CONSOLE=y
CONFIG_SERIAL_MAX3100=y
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_IMX_EARLYCON=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_SH_SCI_EARLYCON=y
CONFIG_SERIAL_SH_SCI_DMA=y
CONFIG_SERIAL_HS_LPC32XX=y
CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
CONFIG_SERIAL_PMACZILOG_TTYS=y
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_QCOM_GENI=y
CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
CONFIG_SERIAL_SIFIVE=y
CONFIG_SERIAL_SIFIVE_CONSOLE=y
CONFIG_SERIAL_LANTIQ=y
CONFIG_SERIAL_LANTIQ_CONSOLE=y
CONFIG_SERIAL_QE=y
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_SC16IS7XX_SPI=y
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_MXS_AUART=y
CONFIG_SERIAL_MXS_AUART_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_FSL_LINFLEXUART=y
CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_SPRD=y
CONFIG_SERIAL_SPRD_CONSOLE=y
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_MVEBU_CONSOLE=y
CONFIG_SERIAL_OWL=y
CONFIG_SERIAL_OWL_CONSOLE=y
CONFIG_SERIAL_RDA=y
CONFIG_SERIAL_RDA_CONSOLE=y
CONFIG_SERIAL_MILBEAUT_USIO=y
CONFIG_SERIAL_MILBEAUT_USIO_PORTS=4
CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE=y
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_LITEUART_CONSOLE=y
CONFIG_SERIAL_SUNPLUS=y
CONFIG_SERIAL_SUNPLUS_CONSOLE=y
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_MOXA_INTELLIO=y
CONFIG_N_HDLC=y
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
CONFIG_N_GSM=y
CONFIG_NULL_TTY=y
CONFIG_HVC_DRIVER=y
CONFIG_RPMSG_TTY=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
CONFIG_IPMI_IPMB=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_IPMI_KCS_BMC=y
CONFIG_ASPEED_KCS_IPMI_BMC=y
CONFIG_NPCM7XX_KCS_IPMI_BMC=y
CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
CONFIG_IPMI_KCS_BMC_SERIO=y
CONFIG_ASPEED_BT_IPMI_BMC=y
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_ATMEL=y
CONFIG_HW_RANDOM_BA431=y
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_IXP4XX=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_IMX_RNGC=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_HW_RANDOM_STM32=y
CONFIG_HW_RANDOM_POLARFIRE_SOC=y
CONFIG_HW_RANDOM_MESON=y
CONFIG_HW_RANDOM_MTK=y
CONFIG_HW_RANDOM_EXYNOS=y
CONFIG_HW_RANDOM_NPCM=y
CONFIG_HW_RANDOM_KEYSTONE=y
CONFIG_HW_RANDOM_CCTRNG=y
CONFIG_HW_RANDOM_XIPHERA=y
CONFIG_DTLK=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_SCR24X=y
CONFIG_IPWIRELESS=y
# end of PCMCIA character devices

CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=y
CONFIG_TCG_TIS_SPI_CR50=y
CONFIG_TCG_TIS_I2C=y
CONFIG_TCG_TIS_SYNQUACER=y
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_INFINEON=y
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
CONFIG_TCG_TIS_ST33ZP24_SPI=y
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
CONFIG_XILLYUSB=y
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#
CONFIG_I2C_HIX5HD2=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=y
CONFIG_I2C_ASPEED=y
CONFIG_I2C_AT91=y
CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL=y
CONFIG_I2C_AXXIA=y
CONFIG_I2C_BCM2835=y
CONFIG_I2C_BCM_IPROC=y
CONFIG_I2C_BCM_KONA=y
CONFIG_I2C_BRCMSTB=y
CONFIG_I2C_CADENCE=y
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DAVINCI=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DIGICOLOR=y
CONFIG_I2C_EMEV2=y
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
CONFIG_I2C_HIGHLANDER=y
CONFIG_I2C_HISI=y
CONFIG_I2C_IMG=y
CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_IOP3XX=y
CONFIG_I2C_JZ4780=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_LPC2K=y
CONFIG_I2C_MESON=y
CONFIG_I2C_MICROCHIP_CORE=y
CONFIG_I2C_MT65XX=y
CONFIG_I2C_MT7621=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_MXS=y
CONFIG_I2C_NPCM=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_OMAP=y
CONFIG_I2C_OWL=y
CONFIG_I2C_APPLE=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PNX=y
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_SLAVE=y
CONFIG_I2C_QCOM_CCI=y
CONFIG_I2C_QCOM_GENI=y
CONFIG_I2C_QUP=y
CONFIG_I2C_RIIC=y
CONFIG_I2C_RK3X=y
CONFIG_I2C_RZV2M=y
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_SPRD=y
CONFIG_I2C_ST=y
CONFIG_I2C_STM32F4=y
CONFIG_I2C_STM32F7=y
CONFIG_I2C_SUN6I_P2WI=y
CONFIG_I2C_SYNQUACER=y
CONFIG_I2C_TEGRA=y
CONFIG_I2C_TEGRA_BPMP=y
CONFIG_I2C_UNIPHIER=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_VERSATILE=y
CONFIG_I2C_WMT=y
CONFIG_I2C_XILINX=y
CONFIG_I2C_XLP9XX=y
CONFIG_I2C_RCAR=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_DLN2=y
CONFIG_I2C_CP2615=y
CONFIG_I2C_PARPORT=y
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
CONFIG_I2C_VIPERBOARD=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_ICY=y
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_PCA_ISA=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_FSI=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support

CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
CONFIG_DW_I3C_MASTER=y
CONFIG_SVC_I3C_MASTER=y
CONFIG_MIPI_I3C_HCI=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_ALTERA_CORE=y
CONFIG_SPI_ALTERA_DFL=y
CONFIG_SPI_AR934X=y
CONFIG_SPI_ATH79=y
CONFIG_SPI_ARMADA_3700=y
CONFIG_SPI_ASPEED_SMC=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_AT91_USART=y
CONFIG_SPI_ATMEL_QUADSPI=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BCM2835=y
CONFIG_SPI_BCM2835AUX=y
CONFIG_SPI_BCM63XX=y
CONFIG_SPI_BCM63XX_HSSPI=y
CONFIG_SPI_BCM_QSPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
CONFIG_SPI_CADENCE=y
CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_SPI_CADENCE_XSPI=y
CONFIG_SPI_CLPS711X=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_DMA=y
CONFIG_SPI_DW_MMIO=y
CONFIG_SPI_DW_BT1=y
CONFIG_SPI_DW_BT1_DIRMAP=y
CONFIG_SPI_DLN2=y
CONFIG_SPI_EP93XX=y
CONFIG_SPI_FSI=y
CONFIG_SPI_FSL_LPSPI=y
CONFIG_SPI_FSL_QUADSPI=y
CONFIG_SPI_GXP=y
CONFIG_SPI_HISI_KUNPENG=y
CONFIG_SPI_HISI_SFC_V3XX=y
CONFIG_SPI_NXP_FLEXSPI=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_IMG_SPFI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_INGENIC=y
CONFIG_SPI_INTEL=y
CONFIG_SPI_INTEL_PLATFORM=y
CONFIG_SPI_JCORE=y
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_LP8841_RTC=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_FSL_DSPI=y
CONFIG_SPI_MESON_SPICC=y
CONFIG_SPI_MESON_SPIFC=y
CONFIG_SPI_MICROCHIP_CORE=y
CONFIG_SPI_MT65XX=y
CONFIG_SPI_MT7621=y
CONFIG_SPI_MTK_NOR=y
CONFIG_SPI_MTK_SNFI=y
CONFIG_SPI_NPCM_FIU=y
CONFIG_SPI_NPCM_PSPI=y
CONFIG_SPI_LANTIQ_SSC=y
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_TI_QSPI=y
CONFIG_SPI_OMAP_100K=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PIC32=y
CONFIG_SPI_PIC32_SQI=y
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_ROCKCHIP_SFC=y
CONFIG_SPI_RPCIF=y
CONFIG_SPI_RSPI=y
CONFIG_SPI_QUP=y
CONFIG_SPI_QCOM_GENI=y
CONFIG_SPI_S3C64XX=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_SH_MSIOF=y
CONFIG_SPI_SH=y
CONFIG_SPI_SH_HSPI=y
CONFIG_SPI_SIFIVE=y
CONFIG_SPI_SLAVE_MT27XX=y
CONFIG_SPI_SPRD=y
CONFIG_SPI_SPRD_ADI=y
CONFIG_SPI_STM32=y
CONFIG_SPI_STM32_QSPI=y
CONFIG_SPI_ST_SSC4=y
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
CONFIG_SPI_SUNPLUS_SP7021=y
CONFIG_SPI_SYNQUACER=y
CONFIG_SPI_MXIC=y
CONFIG_SPI_TEGRA210_QUAD=y
CONFIG_SPI_TEGRA114=y
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_SPI_UNIPHIER=y
CONFIG_SPI_XCOMM=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_XLP=y
CONFIG_SPI_XTENSA_XTFPGA=y
CONFIG_SPI_ZYNQ_QSPI=y
CONFIG_SPI_ZYNQMP_GQSPI=y
CONFIG_SPI_AMD=y

#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=y

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=y
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=y
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=y
CONFIG_SPMI_HISI3670=y
CONFIG_SPMI_MSM_PMIC_ARB=y
CONFIG_SPMI_MTK_PMIF=y
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PTP_1588_CLOCK_DTE=y
CONFIG_PTP_1588_CLOCK_QORIQ=y
CONFIG_DP83640_PHY=y
CONFIG_PTP_1588_CLOCK_INES=y
CONFIG_PTP_1588_CLOCK_IDT82P33=y
CONFIG_PTP_1588_CLOCK_IDTCM=y
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_AT91PIO4=y
CONFIG_PINCTRL_AXP209=y
CONFIG_PINCTRL_BM1880=y
CONFIG_PINCTRL_DA850_PUPD=y
CONFIG_PINCTRL_DA9062=y
CONFIG_PINCTRL_EQUILIBRIUM=y
CONFIG_PINCTRL_INGENIC=y
CONFIG_PINCTRL_LPC18XX=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_MCP23S08_I2C=y
CONFIG_PINCTRL_MCP23S08_SPI=y
CONFIG_PINCTRL_MCP23S08=y
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
CONFIG_PINCTRL_OCELOT=y
CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_PISTACHIO=y
CONFIG_PINCTRL_RK805=y
CONFIG_PINCTRL_ROCKCHIP=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_STARFIVE=y
CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
CONFIG_PINCTRL_S700=y
CONFIG_PINCTRL_S900=y
CONFIG_PINCTRL_ASPEED=y
CONFIG_PINCTRL_ASPEED_G4=y
CONFIG_PINCTRL_ASPEED_G5=y
CONFIG_PINCTRL_ASPEED_G6=y
CONFIG_PINCTRL_BCM281XX=y
CONFIG_PINCTRL_BCM2835=y
CONFIG_PINCTRL_BCM4908=y
CONFIG_PINCTRL_BCM63XX=y
CONFIG_PINCTRL_BCM6318=y
CONFIG_PINCTRL_BCM6328=y
CONFIG_PINCTRL_BCM6358=y
CONFIG_PINCTRL_BCM6362=y
CONFIG_PINCTRL_BCM6368=y
CONFIG_PINCTRL_BCM63268=y
CONFIG_PINCTRL_IPROC_GPIO=y
CONFIG_PINCTRL_CYGNUS_MUX=y
CONFIG_PINCTRL_NS=y
CONFIG_PINCTRL_NSP_GPIO=y
CONFIG_PINCTRL_NS2_MUX=y
CONFIG_PINCTRL_NSP_MUX=y
CONFIG_PINCTRL_BERLIN=y
CONFIG_PINCTRL_AS370=y
CONFIG_PINCTRL_BERLIN_BG4CT=y
CONFIG_PINCTRL_LOCHNAGAR=y
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_PINCTRL_CS47L92=y

#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
CONFIG_PINCTRL_MT2701=y
CONFIG_PINCTRL_MT7623=y
CONFIG_PINCTRL_MT7629=y
CONFIG_PINCTRL_MT8135=y
CONFIG_PINCTRL_MT8127=y
CONFIG_PINCTRL_MT2712=y
CONFIG_PINCTRL_MT6765=y
CONFIG_PINCTRL_MT6779=y
CONFIG_PINCTRL_MT6795=y
CONFIG_PINCTRL_MT6797=y
CONFIG_PINCTRL_MT7622=y
CONFIG_PINCTRL_MT7986=y
CONFIG_PINCTRL_MT8167=y
CONFIG_PINCTRL_MT8173=y
CONFIG_PINCTRL_MT8183=y
CONFIG_PINCTRL_MT8186=y
CONFIG_PINCTRL_MT8192=y
CONFIG_PINCTRL_MT8195=y
CONFIG_PINCTRL_MT8365=y
CONFIG_PINCTRL_MT8516=y
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers

CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_WPCM450=y
CONFIG_PINCTRL_NPCM7XX=y
CONFIG_PINCTRL_PXA=y
CONFIG_PINCTRL_PXA25X=y
CONFIG_PINCTRL_PXA27X=y
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_APQ8064=y
CONFIG_PINCTRL_APQ8084=y
CONFIG_PINCTRL_IPQ4019=y
CONFIG_PINCTRL_IPQ8064=y
CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_IPQ6018=y
CONFIG_PINCTRL_MSM8226=y
CONFIG_PINCTRL_MSM8660=y
CONFIG_PINCTRL_MSM8960=y
CONFIG_PINCTRL_MDM9607=y
CONFIG_PINCTRL_MDM9615=y
CONFIG_PINCTRL_MSM8X74=y
CONFIG_PINCTRL_MSM8909=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_MSM8953=y
CONFIG_PINCTRL_MSM8976=y
CONFIG_PINCTRL_MSM8994=y
CONFIG_PINCTRL_MSM8996=y
CONFIG_PINCTRL_MSM8998=y
CONFIG_PINCTRL_QCM2290=y
CONFIG_PINCTRL_QCS404=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
CONFIG_PINCTRL_SC7180=y
CONFIG_PINCTRL_SC7280=y
CONFIG_PINCTRL_SC7280_LPASS_LPI=y
CONFIG_PINCTRL_SC8180X=y
CONFIG_PINCTRL_SC8280XP=y
CONFIG_PINCTRL_SDM660=y
CONFIG_PINCTRL_SDM845=y
CONFIG_PINCTRL_SDX55=y
CONFIG_PINCTRL_SM6115=y
CONFIG_PINCTRL_SM6125=y
CONFIG_PINCTRL_SM6350=y
CONFIG_PINCTRL_SM6375=y
CONFIG_PINCTRL_SDX65=y
CONFIG_PINCTRL_SM8150=y
CONFIG_PINCTRL_SM8250=y
CONFIG_PINCTRL_SM8250_LPASS_LPI=y
CONFIG_PINCTRL_SM8350=y
CONFIG_PINCTRL_SM8450=y
CONFIG_PINCTRL_LPASS_LPI=y

#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
CONFIG_PINCTRL_PFC_EMEV2=y
CONFIG_PINCTRL_PFC_R8A77995=y
CONFIG_PINCTRL_PFC_R8A7794=y
CONFIG_PINCTRL_PFC_R8A77990=y
CONFIG_PINCTRL_PFC_R8A7779=y
CONFIG_PINCTRL_PFC_R8A7790=y
CONFIG_PINCTRL_PFC_R8A77950=y
CONFIG_PINCTRL_PFC_R8A77951=y
CONFIG_PINCTRL_PFC_R8A7778=y
CONFIG_PINCTRL_PFC_R8A7793=y
CONFIG_PINCTRL_PFC_R8A7791=y
CONFIG_PINCTRL_PFC_R8A77965=y
CONFIG_PINCTRL_PFC_R8A77960=y
CONFIG_PINCTRL_PFC_R8A77961=y
CONFIG_PINCTRL_PFC_R8A779F0=y
CONFIG_PINCTRL_PFC_R8A7792=y
CONFIG_PINCTRL_PFC_R8A77980=y
CONFIG_PINCTRL_PFC_R8A77970=y
CONFIG_PINCTRL_PFC_R8A779A0=y
CONFIG_PINCTRL_PFC_R8A779G0=y
CONFIG_PINCTRL_PFC_R8A7740=y
CONFIG_PINCTRL_PFC_R8A73A4=y
CONFIG_PINCTRL_RZA1=y
CONFIG_PINCTRL_RZA2=y
CONFIG_PINCTRL_RZG2L=y
CONFIG_PINCTRL_PFC_R8A77470=y
CONFIG_PINCTRL_PFC_R8A7745=y
CONFIG_PINCTRL_PFC_R8A7742=y
CONFIG_PINCTRL_PFC_R8A7743=y
CONFIG_PINCTRL_PFC_R8A7744=y
CONFIG_PINCTRL_PFC_R8A774C0=y
CONFIG_PINCTRL_PFC_R8A774E1=y
CONFIG_PINCTRL_PFC_R8A774A1=y
CONFIG_PINCTRL_PFC_R8A774B1=y
CONFIG_PINCTRL_RZN1=y
CONFIG_PINCTRL_RZV2M=y
CONFIG_PINCTRL_PFC_SH7203=y
CONFIG_PINCTRL_PFC_SH7264=y
CONFIG_PINCTRL_PFC_SH7269=y
CONFIG_PINCTRL_PFC_SH7720=y
CONFIG_PINCTRL_PFC_SH7722=y
CONFIG_PINCTRL_PFC_SH7734=y
CONFIG_PINCTRL_PFC_SH7757=y
CONFIG_PINCTRL_PFC_SH7785=y
CONFIG_PINCTRL_PFC_SH7786=y
CONFIG_PINCTRL_PFC_SH73A0=y
CONFIG_PINCTRL_PFC_SH7723=y
CONFIG_PINCTRL_PFC_SH7724=y
CONFIG_PINCTRL_PFC_SHX3=y
# end of Renesas pinctrl drivers

CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
CONFIG_PINCTRL_EXYNOS_ARM=y
CONFIG_PINCTRL_EXYNOS_ARM64=y
CONFIG_PINCTRL_S3C24XX=y
CONFIG_PINCTRL_S3C64XX=y
CONFIG_PINCTRL_SPRD=y
CONFIG_PINCTRL_SPRD_SC9860=y
CONFIG_PINCTRL_STM32=y
CONFIG_PINCTRL_STM32F429=y
CONFIG_PINCTRL_STM32F469=y
CONFIG_PINCTRL_STM32F746=y
CONFIG_PINCTRL_STM32F769=y
CONFIG_PINCTRL_STM32H743=y
CONFIG_PINCTRL_STM32MP135=y
CONFIG_PINCTRL_STM32MP157=y
CONFIG_PINCTRL_TI_IODELAY=y
CONFIG_PINCTRL_UNIPHIER=y
CONFIG_PINCTRL_UNIPHIER_LD4=y
CONFIG_PINCTRL_UNIPHIER_PRO4=y
CONFIG_PINCTRL_UNIPHIER_SLD8=y
CONFIG_PINCTRL_UNIPHIER_PRO5=y
CONFIG_PINCTRL_UNIPHIER_PXS2=y
CONFIG_PINCTRL_UNIPHIER_LD6B=y
CONFIG_PINCTRL_UNIPHIER_LD11=y
CONFIG_PINCTRL_UNIPHIER_LD20=y
CONFIG_PINCTRL_UNIPHIER_PXS3=y
CONFIG_PINCTRL_UNIPHIER_NX1=y
CONFIG_PINCTRL_VISCONTI=y
CONFIG_PINCTRL_TMPV7700=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_ASPEED=y
CONFIG_GPIO_ASPEED_SGPIO=y
CONFIG_GPIO_ATH79=y
CONFIG_GPIO_RASPBERRYPI_EXP=y
CONFIG_GPIO_BCM_KONA=y
CONFIG_GPIO_BCM_XGS_IPROC=y
CONFIG_GPIO_BRCMSTB=y
CONFIG_GPIO_CADENCE=y
CONFIG_GPIO_CLPS711X=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EIC_SPRD=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_HISI=y
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_IOP=y
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_LPC18XX=y
CONFIG_GPIO_LPC32XX=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
CONFIG_GPIO_MPC8XXX=y
CONFIG_GPIO_MT7621=y
CONFIG_GPIO_MXC=y
CONFIG_GPIO_MXS=y
CONFIG_GPIO_PMIC_EIC_SPRD=y
CONFIG_GPIO_PXA=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_RDA=y
CONFIG_GPIO_ROCKCHIP=y
CONFIG_GPIO_SAMA5D2_PIOBU=y
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=y
CONFIG_GPIO_SNPS_CREG=y
CONFIG_GPIO_SPRD=y
CONFIG_GPIO_STP_XWAY=y
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TEGRA=y
CONFIG_GPIO_TEGRA186=y
CONFIG_GPIO_TS4800=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_GPIO_VISCONTI=y
CONFIG_GPIO_WCD934X=y
CONFIG_GPIO_XGENE_SB=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_XLP=y
CONFIG_GPIO_AMD_FCH=y
CONFIG_GPIO_IDT3243X=y
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
CONFIG_GPIO_TS4900=y
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_BD71815=y
CONFIG_GPIO_BD71828=y
CONFIG_GPIO_BD9571MWV=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_DLN2=y
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_LP87565=y
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_MAX77650=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SL28CPLD=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TPS65218=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_UCB1400=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=y
# end of MFD GPIO expanders

#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=y
CONFIG_GPIO_MAX3191X=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
CONFIG_GPIO_XRA1403=y
CONFIG_GPIO_MOXTET=y
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers

CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2438=y
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves

CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_ATC260X=y
CONFIG_POWER_RESET_BRCMKONA=y
CONFIG_POWER_RESET_BRCMSTB=y
CONFIG_POWER_RESET_GEMINI_POWEROFF=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_RESET_LINKSTATION=y
CONFIG_POWER_RESET_OCELOT_RESET=y
CONFIG_POWER_RESET_LTC2952=y
CONFIG_POWER_RESET_MT6323=y
CONFIG_POWER_RESET_REGULATOR=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_TPS65086=y
CONFIG_POWER_RESET_KEYSTONE=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_POWER_RESET_RMOBILE=y
CONFIG_REBOOT_MODE=y
CONFIG_SYSCON_REBOOT_MODE=y
CONFIG_POWER_RESET_SC27XX=y
CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_IP5XXX_POWER=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_88PM860X=y
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CPCAP=y
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_LEGO_EV3=y
CONFIG_BATTERY_OLPC=y
CONFIG_BATTERY_SAMSUNG_SDI=y
CONFIG_BATTERY_INGENIC=y
CONFIG_BATTERY_WM97XX=y
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_HDQ=y
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
CONFIG_BATTERY_DA9030=y
CONFIG_BATTERY_DA9052=y
CONFIG_CHARGER_DA9150=y
CONFIG_BATTERY_DA9150=y
CONFIG_CHARGER_AXP20X=y
CONFIG_BATTERY_AXP20X=y
CONFIG_AXP20X_POWER=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_BATTERY_TWL4030_MADC=y
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_PCF50633=y
CONFIG_BATTERY_RX51=y
CONFIG_CHARGER_CPCAP=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_LTC4162L=y
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_DETECTOR_MAX14656=y
CONFIG_CHARGER_MAX77650=y
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX77976=y
CONFIG_CHARGER_MAX8997=y
CONFIG_CHARGER_MAX8998=y
CONFIG_CHARGER_MP2629=y
CONFIG_CHARGER_MT6360=y
CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=y
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_CHARGER_TPS65217=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_CROS_USBPD=y
CONFIG_CHARGER_CROS_PCHG=y
CONFIG_CHARGER_SC2731=y
CONFIG_FUEL_GAUGE_SC27XX=y
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD99954=y
CONFIG_RN5T618_POWER=y
CONFIG_BATTERY_ACER_A500=y
CONFIG_BATTERY_UG3105=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_AD7314=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=y
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_ARM_SCMI=y
CONFIG_SENSORS_ARM_SCPI=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_BT1_PVT=y
CONFIG_SENSORS_BT1_PVT_ALARMS=y
CONFIG_SENSORS_CORSAIR_CPRO=y
CONFIG_SENSORS_CORSAIR_PSU=y
CONFIG_SENSORS_DRIVETEMP=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_SPARX5=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_GSC=y
CONFIG_SENSORS_MC13783_ADC=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_FTSTEUTATES=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LAN966X=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LOCHNAGAR=y
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2947=y
CONFIG_SENSORS_LTC2947_I2C=y
CONFIG_SENSORS_LTC2947_SPI=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC2992=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
CONFIG_SENSORS_MAX31730=y
CONFIG_SENSORS_MAX6620=y
CONFIG_SENSORS_MAX6621=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_MLXREG_FAN=y
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_TPS23861=y
CONFIG_SENSORS_MENF21BMC_HWMON=y
CONFIG_SENSORS_MR75203=y
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775_CORE=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT6775_I2C=y
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
CONFIG_SENSORS_NPCM7XX=y
CONFIG_SENSORS_NSA320=y
CONFIG_SENSORS_NZXT_KRAKEN2=y
CONFIG_SENSORS_NZXT_SMART2=y
CONFIG_SENSORS_OCC_P8_I2C=y
CONFIG_SENSORS_OCC_P9_SBE=y
CONFIG_SENSORS_OCC=y
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_PECI_CPUTEMP=y
CONFIG_SENSORS_PECI_DIMMTEMP=y
CONFIG_SENSORS_PECI=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1266=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_BEL_PFE=y
CONFIG_SENSORS_BPA_RS600=y
CONFIG_SENSORS_DELTA_AHE50DC_FAN=y
CONFIG_SENSORS_FSP_3Y=y
CONFIG_SENSORS_IBM_CFFPS=y
CONFIG_SENSORS_DPS920AB=y
CONFIG_SENSORS_INSPUR_IPSPS=y
CONFIG_SENSORS_IR35221=y
CONFIG_SENSORS_IR36021=y
CONFIG_SENSORS_IR38064=y
CONFIG_SENSORS_IR38064_REGULATOR=y
CONFIG_SENSORS_IRPS5401=y
CONFIG_SENSORS_ISL68137=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LM25066_REGULATOR=y
CONFIG_SENSORS_LT7182S=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX15301=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX16601=y
CONFIG_SENSORS_MAX20730=y
CONFIG_SENSORS_MAX20751=y
CONFIG_SENSORS_MAX31785=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_MP2888=y
CONFIG_SENSORS_MP2975=y
CONFIG_SENSORS_MP5023=y
CONFIG_SENSORS_PIM4328=y
CONFIG_SENSORS_PLI1209BC=y
CONFIG_SENSORS_PLI1209BC_REGULATOR=y
CONFIG_SENSORS_PM6764TR=y
CONFIG_SENSORS_PXE1610=y
CONFIG_SENSORS_Q54SJ108A2=y
CONFIG_SENSORS_STPDDC60=y
CONFIG_SENSORS_TPS40422=y
CONFIG_SENSORS_TPS53679=y
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_XDPE152=y
CONFIG_SENSORS_XDPE122=y
CONFIG_SENSORS_XDPE122_REGULATOR=y
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_RASPBERRYPI_HWMON=y
CONFIG_SENSORS_SL28CPLD=y
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHT4x=y
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SY7636A=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_ADS7871=y
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA238=y
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TMP464=y
CONFIG_SENSORS_TMP513=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_W83773G=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=y
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_CPU_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
CONFIG_HISI_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_IMX_SC_THERMAL=y
CONFIG_IMX8MM_THERMAL=y
CONFIG_K3_THERMAL=y
CONFIG_MAX77620_THERMAL=y
CONFIG_QORIQ_THERMAL=y
CONFIG_SPEAR_THERMAL=y
CONFIG_SUN8I_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_RCAR_GEN3_THERMAL=y
CONFIG_RZG2L_THERMAL=y
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_DOVE_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_DA9062_THERMAL=y
CONFIG_MTK_THERMAL=y

#
# Intel thermal drivers
#

#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers

#
# Broadcom thermal drivers
#
CONFIG_BCM2711_THERMAL=y
CONFIG_BCM2835_THERMAL=y
CONFIG_BRCMSTB_THERMAL=y
CONFIG_BCM_NS_THERMAL=y
CONFIG_BCM_SR_THERMAL=y
# end of Broadcom thermal drivers

#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=y
CONFIG_TI_THERMAL=y
CONFIG_OMAP3_THERMAL=y
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y
CONFIG_DRA752_THERMAL=y
# end of Texas Instruments thermal drivers

#
# Samsung thermal drivers
#
CONFIG_EXYNOS_THERMAL=y
# end of Samsung thermal drivers

#
# NVIDIA Tegra thermal drivers
#
CONFIG_TEGRA_SOCTHERM=y
CONFIG_TEGRA_BPMP_THERMAL=y
CONFIG_TEGRA30_TSENSOR=y
# end of NVIDIA Tegra thermal drivers

CONFIG_GENERIC_ADC_THERMAL=y

#
# Qualcomm thermal drivers
#
CONFIG_QCOM_TSENS=y
CONFIG_QCOM_SPMI_ADC_TM5=y
CONFIG_QCOM_SPMI_TEMP_ALARM=y
# end of Qualcomm thermal drivers

CONFIG_UNIPHIER_THERMAL=y
CONFIG_SPRD_THERMAL=y
CONFIG_KHADAS_MCU_FAN_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_BD957XMUF_WATCHDOG=y
CONFIG_DA9052_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
CONFIG_MENF21BMC_WATCHDOG=y
CONFIG_MENZ069_WATCHDOG=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_WM8350_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=y
CONFIG_RAVE_SP_WATCHDOG=y
CONFIG_MLX_WDT=y
CONFIG_SL28CPLD_WATCHDOG=y
CONFIG_ARMADA_37XX_WATCHDOG=y
CONFIG_ASM9260_WATCHDOG=y
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_SAMA5D4_WATCHDOG=y
CONFIG_CADENCE_WATCHDOG=y
CONFIG_FTWDT010_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_EP93XX_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_PNX4008_WATCHDOG=y
CONFIG_DAVINCI_WATCHDOG=y
CONFIG_K3_RTI_WATCHDOG=y
CONFIG_RN5T618_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_NPCM7XX_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_STMP3XXX_RTC_WATCHDOG=y
CONFIG_TS4800_WATCHDOG=y
CONFIG_TS72XX_WATCHDOG=y
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_MAX77620_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_IMX7ULP_WDT=y
CONFIG_RETU_WATCHDOG=y
CONFIG_MOXART_WDT=y
CONFIG_ST_LPC_WATCHDOG=y
CONFIG_TEGRA_WATCHDOG=y
CONFIG_QCOM_WDT=y
CONFIG_MESON_GXBB_WATCHDOG=y
CONFIG_MESON_WATCHDOG=y
CONFIG_MEDIATEK_WATCHDOG=y
CONFIG_DIGICOLOR_WATCHDOG=y
CONFIG_LPC18XX_WATCHDOG=y
CONFIG_RENESAS_WDT=y
CONFIG_RENESAS_RZAWDT=y
CONFIG_RENESAS_RZN1WDT=y
CONFIG_RENESAS_RZG2LWDT=y
CONFIG_ASPEED_WATCHDOG=y
CONFIG_STPMIC1_WATCHDOG=y
CONFIG_UNIPHIER_WATCHDOG=y
CONFIG_RTD119X_WATCHDOG=y
CONFIG_REALTEK_OTTO_WDT=y
CONFIG_SPRD_WATCHDOG=y
CONFIG_PM8916_WATCHDOG=y
CONFIG_VISCONTI_WATCHDOG=y
CONFIG_MSC313E_WATCHDOG=y
CONFIG_APPLE_WATCHDOG=y
CONFIG_SUNPLUS_WATCHDOG=y
CONFIG_SC520_WDT=y
CONFIG_KEMPLD_WDT=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCM2835_WDT=y
CONFIG_BCM_KONA_WDT=y
CONFIG_BCM_KONA_WDT_DEBUG=y
CONFIG_BCM7038_WDT=y
CONFIG_IMGPDC_WDT=y
CONFIG_MPC5200_WDT=y
CONFIG_MEN_A21_WDT=y
CONFIG_UML_WATCHDOG=y

#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=y
CONFIG_MIXCOMWD=y
CONFIG_WDT=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_HOST_SOC=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_PFLASH=y
CONFIG_BCMA_SFLASH=y
CONFIG_BCMA_NFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_AT91_USART=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_ATMEL_SMC=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_MADERA_SPI=y
CONFIG_MFD_CS47L15=y
CONFIG_MFD_CS47L35=y
CONFIG_MFD_CS47L85=y
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=y
CONFIG_MFD_ASIC3=y
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_ENE_KB3930=y
CONFIG_MFD_EXYNOS_LPASS=y
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=y
CONFIG_MFD_MXS_LRADC=y
CONFIG_MFD_MX25_TSADC=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_MFD_HI6421_SPMI=y
CONFIG_MFD_HI655X_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_IQS62X=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77714=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
CONFIG_EZX_PCAP=y
CONFIG_MFD_CPCAP=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_UCB1400_CORE=y
CONFIG_MFD_PM8XXX=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RT4831=y
CONFIG_MFD_RT5033=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=y
CONFIG_MFD_SL28CPLD=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SC27XX_PMIC=y
CONFIG_ABX500_CORE=y
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
# end of STMicroelectronics STMPE Interface Drivers

CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_OMAP_USB_HOST=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=y
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_MFD_STW481X=y
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
CONFIG_MFD_STM32_LPTIMER=y
CONFIG_MFD_STM32_TIMERS=y
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_WCD934X=y
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
CONFIG_MFD_KHADAS_MCU=y
CONFIG_MFD_ACER_A500_EC=y
CONFIG_MFD_QCOM_PM8008=y
CONFIG_RAVE_SP_CORE=y
CONFIG_MFD_INTEL_M10_BMC=y
CONFIG_MFD_RSMU_I2C=y
CONFIG_MFD_RSMU_SPI=y
# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA_LDO1=y
CONFIG_REGULATOR_ARIZONA_MICSUPP=y
CONFIG_REGULATOR_ARM_SCMI=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_ATC260X=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD71815=y
CONFIG_REGULATOR_BD71828=y
CONFIG_REGULATOR_BD718XX=y
CONFIG_REGULATOR_BD9571MWV=y
CONFIG_REGULATOR_BD957XMUF=y
CONFIG_REGULATOR_CPCAP=y
CONFIG_REGULATOR_CROS_EC=y
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FAN53880=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_HI6421V600=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LM363X=y
CONFIG_REGULATOR_LOCHNAGAR=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_MAX77650=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX20086=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6315=y
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6358=y
CONFIG_REGULATOR_MT6359=y
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6380=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCAP=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_RPMH=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_QCOM_USB_VBUS=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT4831=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=y
CONFIG_REGULATOR_RT6160=y
CONFIG_REGULATOR_RT6245=y
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SC2731=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_STM32_BOOSTER=y
CONFIG_REGULATOR_STM32_VREFBUF=y
CONFIG_REGULATOR_STM32_PWR=y
CONFIG_REGULATOR_STPMIC1=y
CONFIG_REGULATOR_TI_ABB=y
CONFIG_REGULATOR_STW481X_VMMC=y
CONFIG_REGULATOR_SY7636A=y
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6286X=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TPS68470=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_UNIPHIER=y
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_RC_CORE=y
CONFIG_BPF_LIRC_MODE2=y
CONFIG_LIRC=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_RCMM_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=y
CONFIG_IR_FINTEK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_GPIO_TX=y
CONFIG_IR_HIX5HD2=y
CONFIG_IR_IGORPLUGUSB=y
CONFIG_IR_IGUANA=y
CONFIG_IR_IMON=y
CONFIG_IR_IMON_RAW=y
CONFIG_IR_ITE_CIR=y
CONFIG_IR_MCEUSB=y
CONFIG_IR_MESON=y
CONFIG_IR_MESON_TX=y
CONFIG_IR_MTK=y
CONFIG_IR_NUVOTON=y
CONFIG_IR_PWM_TX=y
CONFIG_IR_REDRAT3=y
CONFIG_IR_RX51=y
CONFIG_IR_SERIAL=y
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_SPI=y
CONFIG_IR_STREAMZAP=y
CONFIG_IR_SUNXI=y
CONFIG_IR_TOY=y
CONFIG_IR_TTUSBIR=y
CONFIG_IR_WINBOND_CIR=y
CONFIG_RC_ATI_REMOTE=y
CONFIG_RC_LOOPBACK=y
CONFIG_RC_ST=y
CONFIG_RC_XBOX_DVD=y
CONFIG_IR_IMG=y
CONFIG_IR_IMG_RAW=y
CONFIG_IR_IMG_HW=y
CONFIG_IR_IMG_NEC=y
CONFIG_IR_IMG_JVC=y
CONFIG_IR_IMG_SONY=y
CONFIG_IR_IMG_SHARP=y
CONFIG_IR_IMG_SANYO=y
CONFIG_IR_IMG_RC5=y
CONFIG_IR_IMG_RC6=y
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y

#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
CONFIG_CEC_PIN_ERROR_INJ=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=y
CONFIG_CEC_CROS_EC=y
CONFIG_CEC_MESON_AO=y
CONFIG_CEC_MESON_G12A_AO=y
CONFIG_CEC_GPIO=y
CONFIG_CEC_SAMSUNG_S5P=y
CONFIG_CEC_STI=y
CONFIG_CEC_STM32=y
CONFIG_CEC_TEGRA=y
CONFIG_USB_PULSE8_CEC=y
CONFIG_USB_RAINSHADOW_CEC=y
# end of CEC support

CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=y

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=y
CONFIG_V4L2_JPEG_HELPER=y
CONFIG_V4L2_H264=y
CONFIG_V4L2_VP9=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_V4L2_FLASH_LED_CLASS=y
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF_DMA_CONTIG=y
# end of Video4Linux options

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options

#
# Digital TV options
#
CONFIG_DVB_MMAP=y
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
CONFIG_DVB_ULE_DEBUG=y
# end of Digital TV options

#
# Media drivers
#

#
# Drivers filtered as selected at 'Filter media drivers'
#

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_VIDEO_CPIA2=y
CONFIG_USB_GSPCA=y
CONFIG_USB_GSPCA_BENQ=y
CONFIG_USB_GSPCA_CONEX=y
CONFIG_USB_GSPCA_CPIA1=y
CONFIG_USB_GSPCA_DTCS033=y
CONFIG_USB_GSPCA_ETOMS=y
CONFIG_USB_GSPCA_FINEPIX=y
CONFIG_USB_GSPCA_JEILINJ=y
CONFIG_USB_GSPCA_JL2005BCD=y
CONFIG_USB_GSPCA_KINECT=y
CONFIG_USB_GSPCA_KONICA=y
CONFIG_USB_GSPCA_MARS=y
CONFIG_USB_GSPCA_MR97310A=y
CONFIG_USB_GSPCA_NW80X=y
CONFIG_USB_GSPCA_OV519=y
CONFIG_USB_GSPCA_OV534=y
CONFIG_USB_GSPCA_OV534_9=y
CONFIG_USB_GSPCA_PAC207=y
CONFIG_USB_GSPCA_PAC7302=y
CONFIG_USB_GSPCA_PAC7311=y
CONFIG_USB_GSPCA_SE401=y
CONFIG_USB_GSPCA_SN9C2028=y
CONFIG_USB_GSPCA_SN9C20X=y
CONFIG_USB_GSPCA_SONIXB=y
CONFIG_USB_GSPCA_SONIXJ=y
CONFIG_USB_GSPCA_SPCA1528=y
CONFIG_USB_GSPCA_SPCA500=y
CONFIG_USB_GSPCA_SPCA501=y
CONFIG_USB_GSPCA_SPCA505=y
CONFIG_USB_GSPCA_SPCA506=y
CONFIG_USB_GSPCA_SPCA508=y
CONFIG_USB_GSPCA_SPCA561=y
CONFIG_USB_GSPCA_SQ905=y
CONFIG_USB_GSPCA_SQ905C=y
CONFIG_USB_GSPCA_SQ930X=y
CONFIG_USB_GSPCA_STK014=y
CONFIG_USB_GSPCA_STK1135=y
CONFIG_USB_GSPCA_STV0680=y
CONFIG_USB_GSPCA_SUNPLUS=y
CONFIG_USB_GSPCA_T613=y
CONFIG_USB_GSPCA_TOPRO=y
CONFIG_USB_GSPCA_TOUPTEK=y
CONFIG_USB_GSPCA_TV8532=y
CONFIG_USB_GSPCA_VC032X=y
CONFIG_USB_GSPCA_VICAM=y
CONFIG_USB_GSPCA_XIRLINK_CIT=y
CONFIG_USB_GSPCA_ZC3XX=y
CONFIG_USB_GL860=y
CONFIG_USB_M5602=y
CONFIG_USB_STV06XX=y
CONFIG_USB_PWC=y
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=y
CONFIG_VIDEO_USBTV=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_ZR364XX=y

#
# Analog TV USB devices
#
CONFIG_VIDEO_GO7007=y
CONFIG_VIDEO_GO7007_USB=y
CONFIG_VIDEO_GO7007_LOADER=y
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=y
CONFIG_VIDEO_HDPVR=y
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_STK1160_COMMON=y
CONFIG_VIDEO_STK1160=y

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=y
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=y
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=y
CONFIG_VIDEO_CX231XX_DVB=y
CONFIG_VIDEO_TM6000=y
CONFIG_VIDEO_TM6000_ALSA=y
CONFIG_VIDEO_TM6000_DVB=y

#
# Digital TV USB devices
#
CONFIG_DVB_AS102=y
CONFIG_DVB_B2C2_FLEXCOP_USB=y
CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y
CONFIG_DVB_USB_V2=y
CONFIG_DVB_USB_AF9015=y
CONFIG_DVB_USB_AF9035=y
CONFIG_DVB_USB_ANYSEE=y
CONFIG_DVB_USB_AU6610=y
CONFIG_DVB_USB_AZ6007=y
CONFIG_DVB_USB_CE6230=y
CONFIG_DVB_USB_DVBSKY=y
CONFIG_DVB_USB_EC168=y
CONFIG_DVB_USB_GL861=y
CONFIG_DVB_USB_LME2510=y
CONFIG_DVB_USB_MXL111SF=y
CONFIG_DVB_USB_RTL28XXU=y
CONFIG_DVB_USB_ZD1301=y
CONFIG_DVB_USB=y
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=y
CONFIG_DVB_USB_AF9005=y
CONFIG_DVB_USB_AF9005_REMOTE=y
CONFIG_DVB_USB_AZ6027=y
CONFIG_DVB_USB_CINERGY_T2=y
CONFIG_DVB_USB_CXUSB=y
CONFIG_DVB_USB_CXUSB_ANALOG=y
CONFIG_DVB_USB_DIB0700=y
CONFIG_DVB_USB_DIB3000MC=y
CONFIG_DVB_USB_DIBUSB_MB=y
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=y
CONFIG_DVB_USB_DIGITV=y
CONFIG_DVB_USB_DTT200U=y
CONFIG_DVB_USB_DTV5100=y
CONFIG_DVB_USB_DW2102=y
CONFIG_DVB_USB_GP8PSK=y
CONFIG_DVB_USB_M920X=y
CONFIG_DVB_USB_NOVA_T_USB2=y
CONFIG_DVB_USB_OPERA1=y
CONFIG_DVB_USB_PCTV452E=y
CONFIG_DVB_USB_TECHNISAT_USB2=y
CONFIG_DVB_USB_TTUSB2=y
CONFIG_DVB_USB_UMT_010=y
CONFIG_DVB_USB_VP702X=y
CONFIG_DVB_USB_VP7045=y
CONFIG_SMS_USB_DRV=y

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=y
CONFIG_VIDEO_EM28XX_V4L2=y
CONFIG_VIDEO_EM28XX_ALSA=y
CONFIG_VIDEO_EM28XX_DVB=y
CONFIG_VIDEO_EM28XX_RC=y

#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=y
CONFIG_USB_HACKRF=y
CONFIG_USB_MSI2500=y
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SAA7706H=y
CONFIG_RADIO_SHARK=y
CONFIG_RADIO_SHARK2=y
CONFIG_RADIO_SI4713=y
CONFIG_RADIO_SI476X=y
CONFIG_RADIO_TEA575X=y
CONFIG_RADIO_TEA5764=y
CONFIG_RADIO_TEA5764_XTAL=y
CONFIG_RADIO_TEF6862=y
CONFIG_RADIO_WL1273=y
CONFIG_USB_DSBR=y
CONFIG_USB_KEENE=y
CONFIG_USB_MA901=y
CONFIG_USB_MR800=y
CONFIG_USB_RAREMONO=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=y
CONFIG_I2C_SI470X=y
CONFIG_USB_SI4713=y
CONFIG_PLATFORM_SI4713=y
CONFIG_I2C_SI4713=y
CONFIG_RADIO_WL128X=y
CONFIG_V4L_RADIO_ISA_DRIVERS=y
CONFIG_RADIO_AZTECH=y
CONFIG_RADIO_AZTECH_PORT=350
CONFIG_RADIO_CADET=y
CONFIG_RADIO_GEMTEK=y
CONFIG_RADIO_GEMTEK_PORT=34c
CONFIG_RADIO_GEMTEK_PROBE=y
CONFIG_RADIO_ISA=y
CONFIG_RADIO_RTRACK=y
CONFIG_RADIO_RTRACK2=y
CONFIG_RADIO_RTRACK2_PORT=30c
CONFIG_RADIO_RTRACK_PORT=30f
CONFIG_RADIO_SF16FMI=y
CONFIG_RADIO_SF16FMR2=y
CONFIG_RADIO_TERRATEC=y
CONFIG_RADIO_TRUST=y
CONFIG_RADIO_TRUST_PORT=350
CONFIG_RADIO_TYPHOON=y
CONFIG_RADIO_TYPHOON_MUTEFREQ=87500
CONFIG_RADIO_TYPHOON_PORT=316
CONFIG_RADIO_ZOLTRIX=y
CONFIG_RADIO_ZOLTRIX_PORT=20c
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=y
CONFIG_VIDEO_MUX=y

#
# Allegro DVT media platform drivers
#
CONFIG_VIDEO_ALLEGRO_DVT=y

#
# Amlogic media platform drivers
#
CONFIG_VIDEO_MESON_GE2D=y

#
# Amphion drivers
#
CONFIG_VIDEO_AMPHION_VPU=y

#
# Aspeed media platform drivers
#
CONFIG_VIDEO_ASPEED=y

#
# Atmel media platform drivers
#
CONFIG_VIDEO_ATMEL_ISC=y
CONFIG_VIDEO_ATMEL_XISC=y
CONFIG_VIDEO_ATMEL_ISC_BASE=y
CONFIG_VIDEO_ATMEL_ISI=y
CONFIG_VIDEO_MICROCHIP_CSI2DC=y

#
# Cadence media platform drivers
#
CONFIG_VIDEO_CADENCE_CSI2RX=y
CONFIG_VIDEO_CADENCE_CSI2TX=y

#
# Chips&Media media platform drivers
#
CONFIG_VIDEO_CODA=y
CONFIG_VIDEO_IMX_VDOA=y

#
# Intel media platform drivers
#
CONFIG_VIDEO_PXA27x=y

#
# Marvell media platform drivers
#
CONFIG_VIDEO_MMP_CAMERA=y

#
# Mediatek media platform drivers
#
CONFIG_VIDEO_MEDIATEK_JPEG=y
CONFIG_VIDEO_MEDIATEK_MDP=y
CONFIG_VIDEO_MEDIATEK_VCODEC_SCP=y
CONFIG_VIDEO_MEDIATEK_VCODEC_VPU=y
CONFIG_VIDEO_MEDIATEK_VCODEC=y
CONFIG_VIDEO_MEDIATEK_VPU=y

#
# NVidia media platform drivers
#
CONFIG_VIDEO_TEGRA_VDE=y

#
# NXP media platform drivers
#
CONFIG_VIDEO_IMX_MIPI_CSIS=y
CONFIG_VIDEO_VIU=y
CONFIG_VIDEO_IMX_PXP=y
CONFIG_VIDEO_MX2_EMMAPRP=y
CONFIG_VIDEO_IMX8_JPEG=y

#
# Qualcomm media platform drivers
#
CONFIG_VIDEO_QCOM_CAMSS=y
CONFIG_VIDEO_QCOM_VENUS=y

#
# Renesas media platform drivers
#
CONFIG_VIDEO_RENESAS_CEU=y
CONFIG_VIDEO_RCAR_ISP=y
CONFIG_VIDEO_SH_VOU=y
CONFIG_VIDEO_RCAR_CSI2=y
CONFIG_VIDEO_RCAR_VIN=y
CONFIG_VIDEO_RENESAS_FCP=y
CONFIG_VIDEO_RENESAS_FDP1=y
CONFIG_VIDEO_RENESAS_JPU=y
CONFIG_VIDEO_RENESAS_VSP1=y
CONFIG_VIDEO_RCAR_DRIF=y

#
# Rockchip media platform drivers
#
CONFIG_VIDEO_ROCKCHIP_RGA=y
CONFIG_VIDEO_ROCKCHIP_ISP1=y

#
# Samsung media platform drivers
#
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=y
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=y
CONFIG_VIDEO_EXYNOS4_IS_COMMON=y
CONFIG_VIDEO_S5P_FIMC=y
CONFIG_VIDEO_S5P_MIPI_CSIS=y
CONFIG_VIDEO_EXYNOS_FIMC_LITE=y
CONFIG_VIDEO_EXYNOS4_FIMC_IS=y
CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE=y
CONFIG_VIDEO_SAMSUNG_S5P_G2D=y
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=y
CONFIG_VIDEO_SAMSUNG_S5P_MFC=y

#
# STMicroelectronics media platform drivers
#
CONFIG_VIDEO_STI_BDISP=y
CONFIG_DVB_C8SECTPFE=y
CONFIG_VIDEO_STI_DELTA=y
CONFIG_VIDEO_STI_DELTA_MJPEG=y
CONFIG_VIDEO_STI_DELTA_DRIVER=y
CONFIG_VIDEO_STI_HVA=y
CONFIG_VIDEO_STI_HVA_DEBUGFS=y
CONFIG_VIDEO_STM32_DCMI=y
CONFIG_VIDEO_STM32_DMA2D=y

#
# Sunxi media platform drivers
#
CONFIG_VIDEO_SUN4I_CSI=y
CONFIG_VIDEO_SUN6I_CSI=y

#
# Texas Instruments drivers
#
CONFIG_VIDEO_TI_VPDMA=y
CONFIG_VIDEO_TI_SC=y
CONFIG_VIDEO_TI_CSC=y
CONFIG_VIDEO_TI_CAL=y
CONFIG_VIDEO_TI_CAL_MC=y
CONFIG_VIDEO_TI_VPE=y
CONFIG_VIDEO_TI_VPE_DEBUG=y
CONFIG_VIDEO_AM437X_VPFE=y
CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY=y
CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=y
CONFIG_VIDEO_DM6446_CCDC=y
CONFIG_VIDEO_DM355_CCDC=y
CONFIG_VIDEO_DM365_ISIF=y
CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY=y
CONFIG_VIDEO_OMAP2_VOUT_VRFB=y
CONFIG_VIDEO_OMAP2_VOUT=y
CONFIG_VIDEO_OMAP3=y
CONFIG_VIDEO_OMAP3_DEBUG=y

#
# VIA media platform drivers
#

#
# Xilinx media platform drivers
#
CONFIG_VIDEO_XILINX=y
CONFIG_VIDEO_XILINX_CSI2RXSS=y
CONFIG_VIDEO_XILINX_TPG=y
CONFIG_VIDEO_XILINX_VTC=y

#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=y
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIM2M=y
CONFIG_VIDEO_VICODEC=y
CONFIG_VIDEO_VIMC=y
CONFIG_VIDEO_VIVID=y
CONFIG_VIDEO_VIVID_CEC=y
CONFIG_VIDEO_VIVID_MAX_DEVS=64
CONFIG_DVB_TEST_DRIVERS=y
CONFIG_DVB_VIDTV=y

#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=y
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_CYPRESS_FIRMWARE=y
CONFIG_TTPCI_EEPROM=y
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_SMS_SIANO_MDTV=y
CONFIG_SMS_SIANO_RC=y
CONFIG_SMS_SIANO_DEBUGFS=y
CONFIG_VIDEO_V4L2_TPG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y

#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=y

#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=y
CONFIG_VIDEO_CCS_PLL=y
CONFIG_VIDEO_AR0521=y
CONFIG_VIDEO_HI556=y
CONFIG_VIDEO_HI846=y
CONFIG_VIDEO_HI847=y
CONFIG_VIDEO_IMX208=y
CONFIG_VIDEO_IMX214=y
CONFIG_VIDEO_IMX219=y
CONFIG_VIDEO_IMX258=y
CONFIG_VIDEO_IMX274=y
CONFIG_VIDEO_IMX290=y
CONFIG_VIDEO_IMX319=y
CONFIG_VIDEO_IMX334=y
CONFIG_VIDEO_IMX335=y
CONFIG_VIDEO_IMX355=y
CONFIG_VIDEO_IMX412=y
CONFIG_VIDEO_MAX9271_LIB=y
CONFIG_VIDEO_MT9M001=y
CONFIG_VIDEO_MT9M032=y
CONFIG_VIDEO_MT9M111=y
CONFIG_VIDEO_MT9P031=y
CONFIG_VIDEO_MT9T001=y
CONFIG_VIDEO_MT9T112=y
CONFIG_VIDEO_MT9V011=y
CONFIG_VIDEO_MT9V032=y
CONFIG_VIDEO_MT9V111=y
CONFIG_VIDEO_NOON010PC30=y
CONFIG_VIDEO_OG01A1B=y
CONFIG_VIDEO_OV02A10=y
CONFIG_VIDEO_OV08D10=y
CONFIG_VIDEO_OV13858=y
CONFIG_VIDEO_OV13B10=y
CONFIG_VIDEO_OV2640=y
CONFIG_VIDEO_OV2659=y
CONFIG_VIDEO_OV2680=y
CONFIG_VIDEO_OV2685=y
CONFIG_VIDEO_OV2740=y
CONFIG_VIDEO_OV5640=y
CONFIG_VIDEO_OV5645=y
CONFIG_VIDEO_OV5647=y
CONFIG_VIDEO_OV5670=y
CONFIG_VIDEO_OV5675=y
CONFIG_VIDEO_OV5693=y
CONFIG_VIDEO_OV5695=y
CONFIG_VIDEO_OV6650=y
CONFIG_VIDEO_OV7251=y
CONFIG_VIDEO_OV7640=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_OV772X=y
CONFIG_VIDEO_OV7740=y
CONFIG_VIDEO_OV8856=y
CONFIG_VIDEO_OV9282=y
CONFIG_VIDEO_OV9640=y
CONFIG_VIDEO_OV9650=y
CONFIG_VIDEO_OV9734=y
CONFIG_VIDEO_RDACM20=y
CONFIG_VIDEO_RDACM21=y
CONFIG_VIDEO_RJ54N1=y
CONFIG_VIDEO_S5C73M3=y
CONFIG_VIDEO_S5K4ECGX=y
CONFIG_VIDEO_S5K5BAF=y
CONFIG_VIDEO_S5K6A3=y
CONFIG_VIDEO_S5K6AA=y
CONFIG_VIDEO_SR030PC30=y
CONFIG_VIDEO_VS6624=y
CONFIG_VIDEO_CCS=y
CONFIG_VIDEO_ET8EK8=y
CONFIG_VIDEO_M5MOLS=y
# end of Camera sensor devices

#
# Lens drivers
#
CONFIG_VIDEO_AD5820=y
CONFIG_VIDEO_AK7375=y
CONFIG_VIDEO_DW9714=y
CONFIG_VIDEO_DW9768=y
CONFIG_VIDEO_DW9807_VCM=y
# end of Lens drivers

#
# Flash devices
#
CONFIG_VIDEO_ADP1653=y
CONFIG_VIDEO_LM3560=y
CONFIG_VIDEO_LM3646=y
# end of Flash devices

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_SONY_BTF_MPX=y
CONFIG_VIDEO_TDA1997X=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TEA6415C=y
CONFIG_VIDEO_TEA6420=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_UDA1342=y
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_WM8775=y
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
# end of RDS decoders

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
CONFIG_VIDEO_ADV7183=y
CONFIG_VIDEO_ADV748X=y
CONFIG_VIDEO_ADV7604=y
CONFIG_VIDEO_ADV7604_CEC=y
CONFIG_VIDEO_ADV7842=y
CONFIG_VIDEO_ADV7842_CEC=y
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
CONFIG_VIDEO_ISL7998X=y
CONFIG_VIDEO_KS0127=y
CONFIG_VIDEO_MAX9286=y
CONFIG_VIDEO_ML86V7667=y
CONFIG_VIDEO_SAA7110=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_TC358743=y
CONFIG_VIDEO_TC358743_CEC=y
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_TVP7002=y
CONFIG_VIDEO_TW2804=y
CONFIG_VIDEO_TW9903=y
CONFIG_VIDEO_TW9906=y
CONFIG_VIDEO_TW9910=y
CONFIG_VIDEO_VPX3220=y

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_CX25840=y
# end of Video decoders

#
# Video encoders
#
CONFIG_VIDEO_AD9389B=y
CONFIG_VIDEO_ADV7170=y
CONFIG_VIDEO_ADV7175=y
CONFIG_VIDEO_ADV7343=y
CONFIG_VIDEO_ADV7393=y
CONFIG_VIDEO_ADV7511=y
CONFIG_VIDEO_ADV7511_CEC=y
CONFIG_VIDEO_AK881X=y
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_SAA7185=y
CONFIG_VIDEO_THS8200=y
# end of Video encoders

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
# end of Video improvement chips

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
# end of Audio/Video compression chips

#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=y
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=y
CONFIG_VIDEO_M52790=y
CONFIG_VIDEO_ST_MIPID02=y
CONFIG_VIDEO_THS7303=y
# end of Miscellaneous helper chips

#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=y
CONFIG_VIDEO_GS1662=y
# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=y
CONFIG_MEDIA_TUNER_FC0011=y
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_FC2580=y
CONFIG_MEDIA_TUNER_IT913X=y
CONFIG_MEDIA_TUNER_M88RS6000T=y
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MSI001=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MXL301RF=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_QM1D1B0004=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_R820T=y
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_TDA18250=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=y
CONFIG_DVB_MXL5XX=y
CONFIG_DVB_STB0899=y
CONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV0910=y
CONFIG_DVB_STV6110x=y
CONFIG_DVB_STV6111=y

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_MN88472=y
CONFIG_DVB_MN88473=y
CONFIG_DVB_SI2165=y
CONFIG_DVB_TDA18271C2DD=y

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=y
CONFIG_DVB_CX24120=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_DS3000=y
CONFIG_DVB_MB86A16=y
CONFIG_DVB_MT312=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_STB6000=y
CONFIG_DVB_STV0288=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_STV6110=y
CONFIG_DVB_TDA10071=y
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TDA8083=y
CONFIG_DVB_TDA8261=y
CONFIG_DVB_TDA826X=y
CONFIG_DVB_TS2020=y
CONFIG_DVB_TUA6100=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_VES1X93=y
CONFIG_DVB_ZL10036=y
CONFIG_DVB_ZL10039=y

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=y
CONFIG_DVB_AS102_FE=y
CONFIG_DVB_CX22700=y
CONFIG_DVB_CX22702=y
CONFIG_DVB_CXD2820R=y
CONFIG_DVB_CXD2841ER=y
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
CONFIG_DVB_DIB7000M=y
CONFIG_DVB_DIB7000P=y
CONFIG_DVB_DIB9000=y
CONFIG_DVB_DRXD=y
CONFIG_DVB_EC100=y
CONFIG_DVB_GP8PSK_FE=y
CONFIG_DVB_L64781=y
CONFIG_DVB_MT352=y
CONFIG_DVB_NXT6000=y
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
CONFIG_DVB_RTL2832_SDR=y
CONFIG_DVB_S5H1432=y
CONFIG_DVB_SI2168=y
CONFIG_DVB_SP887X=y
CONFIG_DVB_STV0367=y
CONFIG_DVB_TDA10048=y
CONFIG_DVB_TDA1004X=y
CONFIG_DVB_ZD1301_DEMOD=y
CONFIG_DVB_ZL10353=y
CONFIG_DVB_CXD2880=y

#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
CONFIG_DVB_VES1820=y

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
CONFIG_DVB_AU8522_V4L=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LG2160=y
CONFIG_DVB_LGDT3305=y
CONFIG_DVB_LGDT3306A=y
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_MXL692=y
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_OR51211=y
CONFIG_DVB_S5H1409=y
CONFIG_DVB_S5H1411=y

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y
CONFIG_DVB_S921=y

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=y
CONFIG_DVB_TC90522=y

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
CONFIG_DVB_TUNER_DIB0090=y

#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=y
CONFIG_DVB_AF9033=y
CONFIG_DVB_ASCOT2E=y
CONFIG_DVB_ATBM8830=y
CONFIG_DVB_HELENE=y
CONFIG_DVB_HORUS3A=y
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
CONFIG_DVB_IX2505V=y
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=y
CONFIG_DVB_LNBH25=y
CONFIG_DVB_LNBH29=y
CONFIG_DVB_LNBP21=y
CONFIG_DVB_LNBP22=y
CONFIG_DVB_M88RS2000=y
CONFIG_DVB_TDA665x=y
CONFIG_DVB_DRX39XYJ=y

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=y
CONFIG_DVB_SP2=y
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_MIPI_DBI=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DEBUG_SELFTEST=y
CONFIG_DRM_KUNIT_TEST=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_BUDDY=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips

#
# ARM devices
#
CONFIG_DRM_HDLCD=y
CONFIG_DRM_HDLCD_SHOW_UNDERRUN=y
CONFIG_DRM_MALI_DISPLAY=y
CONFIG_DRM_KOMEDA=y
# end of ARM devices

CONFIG_DRM_KMB_DISPLAY=y
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
CONFIG_DRM_EXYNOS=y

#
# CRTCs
#
CONFIG_DRM_EXYNOS5433_DECON=y
CONFIG_DRM_EXYNOS_MIXER=y
CONFIG_DRM_EXYNOS_VIDI=y

#
# Encoders and Bridges
#
CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_EXYNOS_MIC=y

#
# Sub-drivers
#
CONFIG_DRM_EXYNOS_G2D=y
CONFIG_DRM_EXYNOS_IPP=y
CONFIG_DRM_EXYNOS_FIMC=y
CONFIG_DRM_EXYNOS_ROTATOR=y
CONFIG_DRM_EXYNOS_SCALER=y
CONFIG_DRM_EXYNOS_GSC=y
CONFIG_DRM_ROCKCHIP=y
CONFIG_ROCKCHIP_VOP=y
CONFIG_ROCKCHIP_VOP2=y
CONFIG_ROCKCHIP_ANALOGIX_DP=y
CONFIG_ROCKCHIP_CDN_DP=y
CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
CONFIG_ROCKCHIP_LVDS=y
CONFIG_ROCKCHIP_RGB=y
CONFIG_ROCKCHIP_RK3066_HDMI=y
CONFIG_DRM_UDL=y
CONFIG_DRM_RCAR_DW_HDMI=y
CONFIG_DRM_RCAR_USE_LVDS=y
CONFIG_DRM_RCAR_MIPI_DSI=y
CONFIG_DRM_SUN4I=y
CONFIG_DRM_SUN4I_HDMI=y
CONFIG_DRM_SUN4I_HDMI_CEC=y
CONFIG_DRM_SUN4I_BACKEND=y
CONFIG_DRM_SUN6I_DSI=y
CONFIG_DRM_SUN8I_DW_HDMI=y
CONFIG_DRM_SUN8I_MIXER=y
CONFIG_DRM_SUN8I_TCON_TOP=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_MSM=y
CONFIG_DRM_MSM_GPU_STATE=y
CONFIG_DRM_MSM_GPU_SUDO=y
CONFIG_DRM_MSM_MDSS=y
CONFIG_DRM_MSM_MDP4=y
CONFIG_DRM_MSM_MDP5=y
CONFIG_DRM_MSM_DPU=y
CONFIG_DRM_MSM_DP=y
CONFIG_DRM_MSM_DSI=y
CONFIG_DRM_MSM_DSI_28NM_PHY=y
CONFIG_DRM_MSM_DSI_20NM_PHY=y
CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y
CONFIG_DRM_MSM_DSI_14NM_PHY=y
CONFIG_DRM_MSM_DSI_10NM_PHY=y
CONFIG_DRM_MSM_DSI_7NM_PHY=y
CONFIG_DRM_MSM_HDMI=y
CONFIG_DRM_MSM_HDMI_HDCP=y
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_PANEL_ABT_Y030XX067A=y
CONFIG_DRM_PANEL_ARM_VERSATILE=y
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=y
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y
CONFIG_DRM_PANEL_BOE_HIMAX8279D=y
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y
CONFIG_DRM_PANEL_DSI_CM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_EBBG_FT8719=y
CONFIG_DRM_PANEL_ELIDA_KD35T133=y
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=y
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=y
CONFIG_DRM_PANEL_ILITEK_IL9322=y
CONFIG_DRM_PANEL_ILITEK_ILI9341=y
CONFIG_DRM_PANEL_ILITEK_ILI9881C=y
CONFIG_DRM_PANEL_INNOLUX_EJ030NA=y
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
CONFIG_DRM_PANEL_JDI_R63452=y
CONFIG_DRM_PANEL_KHADAS_TS050=y
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=y
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=y
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y
CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
CONFIG_DRM_PANEL_LG_LB035Q02=y
CONFIG_DRM_PANEL_LG_LG4573=y
CONFIG_DRM_PANEL_NEC_NL8048HL11=y
CONFIG_DRM_PANEL_NEWVISION_NV3052C=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_NOVATEK_NT35560=y
CONFIG_DRM_PANEL_NOVATEK_NT35950=y
CONFIG_DRM_PANEL_NOVATEK_NT36672A=y
CONFIG_DRM_PANEL_NOVATEK_NT39016=y
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=y
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=y
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=y
CONFIG_DRM_PANEL_RAYDIUM_RM67191=y
CONFIG_DRM_PANEL_RAYDIUM_RM68200=y
CONFIG_DRM_PANEL_RONBO_RB070D30=y
CONFIG_DRM_PANEL_SAMSUNG_DB7430=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
CONFIG_DRM_PANEL_SAMSUNG_S6D27A1=y
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_SPI=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=y
CONFIG_DRM_PANEL_SHARP_LS060T1SX01=y
CONFIG_DRM_PANEL_SITRONIX_ST7701=y
CONFIG_DRM_PANEL_SITRONIX_ST7703=y
CONFIG_DRM_PANEL_SITRONIX_ST7789V=y
CONFIG_DRM_PANEL_SONY_ACX565AKM=y
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=y
CONFIG_DRM_PANEL_TDO_TL070WSH30=y
CONFIG_DRM_PANEL_TPO_TD028TTEC1=y
CONFIG_DRM_PANEL_TPO_TD043MTEA1=y
CONFIG_DRM_PANEL_TPO_TPG110=y
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y
CONFIG_DRM_PANEL_VISIONOX_RM69299=y
CONFIG_DRM_PANEL_WIDECHIPS_WS2401=y
CONFIG_DRM_PANEL_XINPENG_XPP055C272=y
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=y
CONFIG_DRM_CHIPONE_ICN6211=y
CONFIG_DRM_CHRONTEL_CH7033=y
CONFIG_DRM_CROS_EC_ANX7688=y
CONFIG_DRM_DISPLAY_CONNECTOR=y
CONFIG_DRM_FSL_LDB=y
CONFIG_DRM_ITE_IT6505=y
CONFIG_DRM_LONTIUM_LT8912B=y
CONFIG_DRM_LONTIUM_LT9211=y
CONFIG_DRM_LONTIUM_LT9611=y
CONFIG_DRM_LONTIUM_LT9611UXC=y
CONFIG_DRM_ITE_IT66121=y
CONFIG_DRM_LVDS_CODEC=y
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y
CONFIG_DRM_NWL_MIPI_DSI=y
CONFIG_DRM_NXP_PTN3460=y
CONFIG_DRM_PARADE_PS8622=y
CONFIG_DRM_PARADE_PS8640=y
CONFIG_DRM_SIL_SII8620=y
CONFIG_DRM_SII902X=y
CONFIG_DRM_SII9234=y
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_THINE_THC63LVD1024=y
CONFIG_DRM_TOSHIBA_TC358762=y
CONFIG_DRM_TOSHIBA_TC358764=y
CONFIG_DRM_TOSHIBA_TC358767=y
CONFIG_DRM_TOSHIBA_TC358768=y
CONFIG_DRM_TOSHIBA_TC358775=y
CONFIG_DRM_TI_DLPC3433=y
CONFIG_DRM_TI_TFP410=y
CONFIG_DRM_TI_SN65DSI83=y
CONFIG_DRM_TI_SN65DSI86=y
CONFIG_DRM_TI_TPD12S015=y
CONFIG_DRM_ANALOGIX_ANX6345=y
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_I2C_ADV7511_CEC=y
CONFIG_DRM_CDNS_MHDP8546=y
CONFIG_DRM_CDNS_MHDP8546_J721E=y
CONFIG_DRM_IMX8QM_LDB=y
CONFIG_DRM_IMX8QXP_LDB=y
CONFIG_DRM_IMX8QXP_PIXEL_COMBINER=y
CONFIG_DRM_IMX8QXP_PIXEL_LINK=y
CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI=y
CONFIG_DRM_DW_HDMI=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=y
CONFIG_DRM_DW_HDMI_I2S_AUDIO=y
CONFIG_DRM_DW_HDMI_GP_AUDIO=y
CONFIG_DRM_DW_HDMI_CEC=y
CONFIG_DRM_DW_MIPI_DSI=y
# end of Display Interface Bridges

CONFIG_DRM_IMX=y
CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
CONFIG_DRM_IMX_TVE=y
CONFIG_DRM_IMX_LDB=y
CONFIG_DRM_IMX_HDMI=y
CONFIG_DRM_INGENIC=y
CONFIG_DRM_INGENIC_IPU=y
CONFIG_DRM_V3D=y
CONFIG_DRM_ETNAVIV=y
CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_LOGICVC=y
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
CONFIG_DRM_IMX_LCDIF=y
CONFIG_DRM_ARCPGU=y
CONFIG_DRM_GM12U320=y
CONFIG_DRM_PANEL_MIPI_DBI=y
CONFIG_DRM_SIMPLEDRM=y
CONFIG_TINYDRM_HX8357D=y
CONFIG_TINYDRM_ILI9163=y
CONFIG_TINYDRM_ILI9225=y
CONFIG_TINYDRM_ILI9341=y
CONFIG_TINYDRM_ILI9486=y
CONFIG_TINYDRM_MI0283QT=y
CONFIG_TINYDRM_REPAPER=y
CONFIG_TINYDRM_ST7586=y
CONFIG_TINYDRM_ST7735R=y
CONFIG_DRM_PL111=y
CONFIG_DRM_TVE200=y
CONFIG_DRM_LIMA=y
CONFIG_DRM_ASPEED_GFX=y
CONFIG_DRM_MCDE=y
CONFIG_DRM_TIDSS=y
CONFIG_DRM_ZYNQMP_DPSUB=y
CONFIG_DRM_GUD=y
CONFIG_DRM_SSD130X=y
CONFIG_DRM_SSD130X_I2C=y
CONFIG_DRM_SSD130X_SPI=y
CONFIG_DRM_SPRD=y
CONFIG_DRM_LEGACY=y
CONFIG_DRM_EXPORT_FOR_TESTS=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_LIB_RANDOM=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_CLPS711X=y
CONFIG_FB_IMX=y
CONFIG_FB_APOLLO=y
CONFIG_FB_Q40=y
CONFIG_FB_AMIGA=y
CONFIG_FB_AMIGA_OCS=y
CONFIG_FB_AMIGA_ECS=y
CONFIG_FB_AMIGA_AGA=y
CONFIG_FB_FM2=y
CONFIG_FB_ARC=y
CONFIG_FB_ATARI=y
CONFIG_FB_CONTROL=y
CONFIG_FB_VALKYRIE=y
CONFIG_FB_MAC=y
CONFIG_FB_HP300=y
CONFIG_FB_UVESA=y
CONFIG_FB_GBE=y
CONFIG_FB_GBE_MEM=4
CONFIG_FB_PVR2=y
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_ATMEL=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_WM8505=y
CONFIG_FB_WMT_GE_ROPS=y
CONFIG_FB_PXA168=y
CONFIG_FB_W100=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_TMIO=y
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_S3C=y
CONFIG_FB_S3C_DEBUG_REGWRITE=y
CONFIG_FB_SM501=y
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_GOLDFISH=y
CONFIG_FB_DA8XX=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
CONFIG_FB_BROADSHEET=y
CONFIG_FB_SSD1307=y
CONFIG_FB_OMAP_LCD_H3=y
CONFIG_FB_OMAP2=y
CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
CONFIG_FB_OMAP2_NUM_FBS=3
CONFIG_FB_OMAP2_DSS_INIT=y
CONFIG_FB_OMAP2_DSS=y
CONFIG_FB_OMAP2_DSS_DEBUG=y
CONFIG_FB_OMAP2_DSS_DEBUGFS=y
CONFIG_FB_OMAP2_DSS_COLLECT_IRQ_STATS=y
CONFIG_FB_OMAP2_DSS_DPI=y
CONFIG_FB_OMAP2_DSS_VENC=y
CONFIG_FB_OMAP2_DSS_HDMI_COMMON=y
CONFIG_FB_OMAP4_DSS_HDMI=y
CONFIG_FB_OMAP5_DSS_HDMI=y
CONFIG_FB_OMAP2_DSS_SDI=y
CONFIG_FB_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_FB_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y

#
# OMAPFB Panel and Encoder Drivers
#
CONFIG_FB_OMAP2_ENCODER_OPA362=y
CONFIG_FB_OMAP2_ENCODER_TFP410=y
CONFIG_FB_OMAP2_ENCODER_TPD12S015=y
CONFIG_FB_OMAP2_CONNECTOR_DVI=y
CONFIG_FB_OMAP2_CONNECTOR_HDMI=y
CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=y
CONFIG_FB_OMAP2_PANEL_DPI=y
CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=y
# end of OMAPFB Panel and Encoder Drivers

CONFIG_MMP_DISP=y
CONFIG_MMP_DISP_CONTROLLER=y
CONFIG_MMP_DISP_SPI=y
CONFIG_MMP_PANEL_TPOHVGA=y
CONFIG_MMP_FB=y
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_AMS369FG06=y
CONFIG_LCD_LMS501KF03=y
CONFIG_LCD_HX8357=y
CONFIG_LCD_OTM3225A=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_ATMEL_LCDC=y
CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_LM3533=y
CONFIG_BACKLIGHT_OMAP1=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=y
CONFIG_BACKLIGHT_MAX8925=y
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_RT4831=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_PCF50633=y
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_LP8788=y
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_RAVE_SP=y
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support

CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y
# end of Console display driver support

CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
# end of Graphics support

CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_DMASOUND_ATARI=y
CONFIG_DMASOUND_PAULA=y
CONFIG_DMASOUND_Q40=y
CONFIG_DMASOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_CTL_FAST_LOOKUP=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_CTL_INPUT_VALIDATION=y
CONFIG_SND_CTL_DEBUG=y
CONFIG_SND_JACK_INJECTION_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_SEQ_MIDI=y
CONFIG_SND_SEQ_VIRMIDI=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
CONFIG_SND_ALOOP=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_SERIAL_GENERIC=y
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CS8409=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# end of HD-Audio

CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_EXT_CORE=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_INTEL_DSP_CONFIG=y
CONFIG_SND_PXA2XX_LIB=y
CONFIG_SND_SPI=y
CONFIG_SND_AT73C213=y
CONFIG_SND_AT73C213_TARGET_BITRATE=48000
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=y
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=y
CONFIG_SND_USB_6FIRE=y
CONFIG_SND_USB_HIFACE=y
CONFIG_SND_BCD2000=y
CONFIG_SND_USB_LINE6=y
CONFIG_SND_USB_POD=y
CONFIG_SND_USB_PODHD=y
CONFIG_SND_USB_TONEPORT=y
CONFIG_SND_USB_VARIAX=y
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=y
CONFIG_SND_DICE=y
CONFIG_SND_OXFW=y
CONFIG_SND_ISIGHT=y
CONFIG_SND_FIREWORKS=y
CONFIG_SND_BEBOB=y
CONFIG_SND_FIREWIRE_DIGI00X=y
CONFIG_SND_FIREWIRE_TASCAM=y
CONFIG_SND_FIREWIRE_MOTU=y
CONFIG_SND_FIREFACE=y
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=y
CONFIG_SND_PDAUDIOCF=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_TOPOLOGY_KUNIT_TEST=y
CONFIG_SND_SOC_UTILS_KUNIT_TEST=y
CONFIG_SND_SOC_ADI=y
CONFIG_SND_SOC_ADI_AXI_I2S=y
CONFIG_SND_SOC_ADI_AXI_SPDIF=y
CONFIG_SND_SOC_AMD_ACP=y
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=y
CONFIG_SND_AMD_ACP_CONFIG=y
CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_ATMEL_SOC_PDC=y
CONFIG_SND_ATMEL_SOC_DMA=y
CONFIG_SND_ATMEL_SOC_SSC=y
CONFIG_SND_ATMEL_SOC_SSC_PDC=y
CONFIG_SND_ATMEL_SOC_SSC_DMA=y
CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
CONFIG_SND_ATMEL_SOC_WM8904=y
CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
CONFIG_SND_ATMEL_SOC_CLASSD=y
CONFIG_SND_ATMEL_SOC_PDMIC=y
CONFIG_SND_ATMEL_SOC_I2S=y
CONFIG_SND_SOC_MIKROE_PROTO=y
CONFIG_SND_MCHP_SOC_I2S_MCC=y
CONFIG_SND_MCHP_SOC_SPDIFTX=y
CONFIG_SND_MCHP_SOC_SPDIFRX=y
CONFIG_SND_MCHP_SOC_PDMC=y
CONFIG_SND_BCM2835_SOC_I2S=y
CONFIG_SND_SOC_CYGNUS=y
CONFIG_SND_BCM63XX_I2S_WHISTLER=y
CONFIG_SND_EP93XX_SOC=y
CONFIG_SND_DESIGNWARE_I2S=y
CONFIG_SND_DESIGNWARE_PCM=y

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=y
CONFIG_SND_SOC_FSL_SAI=y
CONFIG_SND_SOC_FSL_MQS=y
CONFIG_SND_SOC_FSL_AUDMIX=y
CONFIG_SND_SOC_FSL_SSI=y
CONFIG_SND_SOC_FSL_SPDIF=y
CONFIG_SND_SOC_FSL_ESAI=y
CONFIG_SND_SOC_FSL_MICFIL=y
CONFIG_SND_SOC_FSL_EASRC=y
CONFIG_SND_SOC_FSL_XCVR=y
CONFIG_SND_SOC_FSL_AUD2HTX=y
CONFIG_SND_SOC_FSL_UTILS=y
CONFIG_SND_SOC_FSL_RPMSG=y
CONFIG_SND_SOC_IMX_PCM_DMA=y
CONFIG_SND_SOC_IMX_AUDIO_RPMSG=y
CONFIG_SND_SOC_IMX_PCM_RPMSG=y
CONFIG_SND_SOC_IMX_AUDMUX=y
CONFIG_SND_IMX_SOC=y

#
# SoC Audio support for Freescale i.MX boards:
#
CONFIG_SND_SOC_IMX_ES8328=y
CONFIG_SND_SOC_IMX_SGTL5000=y
CONFIG_SND_SOC_IMX_SPDIF=y
CONFIG_SND_SOC_FSL_ASOC_CARD=y
CONFIG_SND_SOC_IMX_AUDMIX=y
CONFIG_SND_SOC_IMX_HDMI=y
CONFIG_SND_SOC_IMX_RPMSG=y
CONFIG_SND_SOC_IMX_CARD=y
# end of SoC Audio for Freescale CPUs

CONFIG_SND_I2S_HI6210_I2S=y
CONFIG_SND_JZ4740_SOC_I2S=y
CONFIG_SND_KIRKWOOD_SOC=y
CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=y
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=y
CONFIG_SND_SOC_IMG_I2S_OUT=y
CONFIG_SND_SOC_IMG_PARALLEL_OUT=y
CONFIG_SND_SOC_IMG_SPDIF_IN=y
CONFIG_SND_SOC_IMG_SPDIF_OUT=y
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=y
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SOC_ACPI_INTEL_MATCH=y
CONFIG_SND_SOC_INTEL_KEEMBAY=y
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
CONFIG_SND_SOC_INTEL_BDW_RT5650_MACH=y
CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=y
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=y
CONFIG_SND_SOC_MEDIATEK=y
CONFIG_SND_SOC_MT8186=y
CONFIG_SND_SOC_MT8186_MT6366_DA7219_MAX98357=y
CONFIG_SND_SOC_MT8186_MT6366_RT1019_RT5682S=y
CONFIG_SND_SOC_MTK_BTCVSD=y
CONFIG_SND_SOC_MT8195=y
CONFIG_SND_SOC_MT8195_MT6359=y

#
# ASoC support for Amlogic platforms
#
CONFIG_SND_MESON_AIU=y
CONFIG_SND_MESON_AXG_FIFO=y
CONFIG_SND_MESON_AXG_FRDDR=y
CONFIG_SND_MESON_AXG_TODDR=y
CONFIG_SND_MESON_AXG_TDM_FORMATTER=y
CONFIG_SND_MESON_AXG_TDM_INTERFACE=y
CONFIG_SND_MESON_AXG_TDMIN=y
CONFIG_SND_MESON_AXG_TDMOUT=y
CONFIG_SND_MESON_AXG_SOUND_CARD=y
CONFIG_SND_MESON_AXG_SPDIFOUT=y
CONFIG_SND_MESON_AXG_SPDIFIN=y
CONFIG_SND_MESON_AXG_PDM=y
CONFIG_SND_MESON_CARD_UTILS=y
CONFIG_SND_MESON_CODEC_GLUE=y
CONFIG_SND_MESON_GX_SOUND_CARD=y
CONFIG_SND_MESON_G12A_TOACODEC=y
CONFIG_SND_MESON_G12A_TOHDMITX=y
CONFIG_SND_SOC_MESON_T9015=y
# end of ASoC support for Amlogic platforms

CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
CONFIG_SND_PXA2XX_SOC=y
CONFIG_SND_SOC_QCOM=y
CONFIG_SND_SOC_LPASS_CPU=y
CONFIG_SND_SOC_LPASS_HDMI=y
CONFIG_SND_SOC_LPASS_PLATFORM=y
CONFIG_SND_SOC_LPASS_CDC_DMA=y
CONFIG_SND_SOC_LPASS_IPQ806X=y
CONFIG_SND_SOC_LPASS_APQ8016=y
CONFIG_SND_SOC_LPASS_SC7180=y
CONFIG_SND_SOC_LPASS_SC7280=y
CONFIG_SND_SOC_STORM=y
CONFIG_SND_SOC_APQ8016_SBC=y
CONFIG_SND_SOC_QCOM_COMMON=y
CONFIG_SND_SOC_QDSP6_COMMON=y
CONFIG_SND_SOC_QDSP6_CORE=y
CONFIG_SND_SOC_QDSP6_AFE=y
CONFIG_SND_SOC_QDSP6_AFE_DAI=y
CONFIG_SND_SOC_QDSP6_AFE_CLOCKS=y
CONFIG_SND_SOC_QDSP6_ADM=y
CONFIG_SND_SOC_QDSP6_ROUTING=y
CONFIG_SND_SOC_QDSP6_ASM=y
CONFIG_SND_SOC_QDSP6_ASM_DAI=y
CONFIG_SND_SOC_QDSP6_APM_DAI=y
CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI=y
CONFIG_SND_SOC_QDSP6_APM=y
CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS=y
CONFIG_SND_SOC_QDSP6_PRM=y
CONFIG_SND_SOC_QDSP6=y
CONFIG_SND_SOC_MSM8996=y
CONFIG_SND_SOC_SDM845=y
CONFIG_SND_SOC_SM8250=y
CONFIG_SND_SOC_SC7180=y
CONFIG_SND_SOC_SC7280=y
CONFIG_SND_SOC_ROCKCHIP=y
CONFIG_SND_SOC_ROCKCHIP_I2S=y
CONFIG_SND_SOC_ROCKCHIP_I2S_TDM=y
CONFIG_SND_SOC_ROCKCHIP_PDM=y
CONFIG_SND_SOC_ROCKCHIP_SPDIF=y
CONFIG_SND_SOC_ROCKCHIP_MAX98090=y
CONFIG_SND_SOC_ROCKCHIP_RT5645=y
CONFIG_SND_SOC_RK3288_HDMI_ANALOG=y
CONFIG_SND_SOC_RK3399_GRU_SOUND=y
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_S3C24XX_I2S=y
CONFIG_SND_SAMSUNG_PCM=y
CONFIG_SND_SAMSUNG_SPDIF=y
CONFIG_SND_SAMSUNG_I2S=y
CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753=y
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8580=y
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y
CONFIG_SND_SOC_SAMSUNG_S3C24XX_UDA134X=y
CONFIG_SND_SOC_SAMSUNG_SIMTEC=y
CONFIG_SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23=y
CONFIG_SND_SOC_SAMSUNG_SIMTEC_HERMES=y
CONFIG_SND_SOC_SAMSUNG_H1940_UDA1380=y
CONFIG_SND_SOC_SAMSUNG_RX1950_UDA1380=y
CONFIG_SND_SOC_SMARTQ=y
CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=y
CONFIG_SND_SOC_SMDK_WM8994_PCM=y
CONFIG_SND_SOC_SPEYSIDE=y
CONFIG_SND_SOC_TOBERMORY=y
CONFIG_SND_SOC_BELLS=y
CONFIG_SND_SOC_LOWLAND=y
CONFIG_SND_SOC_LITTLEMILL=y
CONFIG_SND_SOC_SNOW=y
CONFIG_SND_SOC_ODROID=y
CONFIG_SND_SOC_ARNDALE=y
CONFIG_SND_SOC_SAMSUNG_TM2_WM5110=y
CONFIG_SND_SOC_SAMSUNG_ARIES_WM8994=y
CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811=y

#
# SoC Audio support for Renesas SoCs
#
CONFIG_SND_SOC_SH4_FSI=y
CONFIG_SND_SOC_RCAR=y
CONFIG_SND_SOC_RZ=y
# end of SoC Audio support for Renesas SoCs

CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_ACPI=y
CONFIG_SND_SOC_SOF_ACPI_DEV=y
CONFIG_SND_SOC_SOF_OF=y
CONFIG_SND_SOC_SOF_OF_DEV=y
CONFIG_SND_SOC_SOF_COMPRESS=y
CONFIG_SND_SOC_SOF_CLIENT=y
CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT=y
CONFIG_SND_SOC_SOF_FORCE_PROBE_WORKQUEUE=y
CONFIG_SND_SOC_SOF_NOCODEC=y
CONFIG_SND_SOC_SOF_NOCODEC_SUPPORT=y
CONFIG_SND_SOC_SOF_STRICT_ABI_CHECKS=y
CONFIG_SND_SOC_SOF_DEBUG=y
CONFIG_SND_SOC_SOF_FORCE_NOCODEC_MODE=y
CONFIG_SND_SOC_SOF_DEBUG_XRUN_STOP=y
CONFIG_SND_SOC_SOF_DEBUG_VERBOSE_IPC=y
CONFIG_SND_SOC_SOF_DEBUG_FORCE_IPC_POSITION=y
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE=y
CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST=y
CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST_NUM=2
CONFIG_SND_SOC_SOF_DEBUG_IPC_MSG_INJECTOR=y
CONFIG_SND_SOC_SOF_DEBUG_RETAIN_DSP_CONTEXT=y
CONFIG_SND_SOC_SOF=y
CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE=y
CONFIG_SND_SOC_SOF_IPC3=y
CONFIG_SND_SOC_SOF_AMD_TOPLEVEL=y
CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y
CONFIG_SND_SOC_SOF_IMX_COMMON=y
CONFIG_SND_SOC_SOF_IMX8=y
CONFIG_SND_SOC_SOF_IMX8M=y
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y
CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=y
CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=y
CONFIG_SND_SOC_SOF_INTEL_COMMON=y
CONFIG_SND_SOC_SOF_BAYTRAIL=y
CONFIG_SND_SOC_SOF_BROADWELL=y
CONFIG_SND_SOC_SOF_MTK_TOPLEVEL=y
CONFIG_SND_SOC_SOF_MTK_COMMON=y
CONFIG_SND_SOC_SOF_MT8186=y
CONFIG_SND_SOC_SOF_MT8195=y
CONFIG_SND_SOC_SOF_XTENSA=y
CONFIG_SND_SOC_SPRD=y
CONFIG_SND_SOC_SPRD_MCDT=y
CONFIG_SND_SOC_STI=y

#
# STMicroelectronics STM32 SOC audio support
#
CONFIG_SND_SOC_STM32_SAI=y
CONFIG_SND_SOC_STM32_I2S=y
CONFIG_SND_SOC_STM32_SPDIFRX=y
CONFIG_SND_SOC_STM32_DFSDM=y
# end of STMicroelectronics STM32 SOC audio support

#
# Allwinner SoC Audio support
#
CONFIG_SND_SUN4I_CODEC=y
CONFIG_SND_SUN8I_CODEC=y
CONFIG_SND_SUN8I_CODEC_ANALOG=y
CONFIG_SND_SUN50I_CODEC_ANALOG=y
CONFIG_SND_SUN4I_I2S=y
CONFIG_SND_SUN4I_SPDIF=y
CONFIG_SND_SUN8I_ADDA_PR_REGMAP=y
# end of Allwinner SoC Audio support

CONFIG_SND_SOC_TEGRA=y
CONFIG_SND_SOC_TEGRA20_AC97=y
CONFIG_SND_SOC_TEGRA20_DAS=y
CONFIG_SND_SOC_TEGRA20_I2S=y
CONFIG_SND_SOC_TEGRA20_SPDIF=y
CONFIG_SND_SOC_TEGRA30_AHUB=y
CONFIG_SND_SOC_TEGRA30_I2S=y
CONFIG_SND_SOC_TEGRA210_AHUB=y
CONFIG_SND_SOC_TEGRA210_DMIC=y
CONFIG_SND_SOC_TEGRA210_I2S=y
CONFIG_SND_SOC_TEGRA210_OPE=y
CONFIG_SND_SOC_TEGRA186_ASRC=y
CONFIG_SND_SOC_TEGRA186_DSPK=y
CONFIG_SND_SOC_TEGRA210_ADMAIF=y
CONFIG_SND_SOC_TEGRA210_MVC=y
CONFIG_SND_SOC_TEGRA210_SFC=y
CONFIG_SND_SOC_TEGRA210_AMX=y
CONFIG_SND_SOC_TEGRA210_ADX=y
CONFIG_SND_SOC_TEGRA210_MIXER=y
CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=y
CONFIG_SND_SOC_TEGRA_MACHINE_DRV=y
CONFIG_SND_SOC_TEGRA_RT5640=y
CONFIG_SND_SOC_TEGRA_WM8753=y
CONFIG_SND_SOC_TEGRA_WM8903=y
CONFIG_SND_SOC_TEGRA_WM9712=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
CONFIG_SND_SOC_TEGRA_ALC5632=y
CONFIG_SND_SOC_TEGRA_MAX98090=y
CONFIG_SND_SOC_TEGRA_RT5677=y
CONFIG_SND_SOC_TEGRA_SGTL5000=y

#
# Audio support for Texas Instruments SoCs
#
CONFIG_SND_SOC_TI_EDMA_PCM=y
CONFIG_SND_SOC_TI_SDMA_PCM=y
CONFIG_SND_SOC_TI_UDMA_PCM=y

#
# Texas Instruments DAI support for:
#
CONFIG_SND_SOC_DAVINCI_ASP=y
CONFIG_SND_SOC_DAVINCI_MCASP=y
CONFIG_SND_SOC_DAVINCI_VCIF=y
CONFIG_SND_SOC_OMAP_DMIC=y
CONFIG_SND_SOC_OMAP_MCBSP=y
CONFIG_SND_SOC_OMAP_MCPDM=y

#
# Audio support for boards with Texas Instruments SoCs
#
CONFIG_SND_SOC_OMAP3_TWL4030=y
CONFIG_SND_SOC_OMAP_ABE_TWL6040=y
CONFIG_SND_SOC_OMAP_HDMI=y
CONFIG_SND_SOC_J721E_EVM=y
# end of Audio support for Texas Instruments SoCs

CONFIG_SND_SOC_UNIPHIER=y
CONFIG_SND_SOC_UNIPHIER_AIO=y
CONFIG_SND_SOC_UNIPHIER_LD11=y
CONFIG_SND_SOC_UNIPHIER_PXS2=y
CONFIG_SND_SOC_UNIPHIER_EVEA_CODEC=y
CONFIG_SND_SOC_XILINX_I2S=y
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y
CONFIG_SND_SOC_XILINX_SPDIF=y
CONFIG_SND_SOC_XTFPGA_I2S=y
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
CONFIG_SND_SOC_ALL_CODECS=y
CONFIG_SND_SOC_88PM860X=y
CONFIG_SND_SOC_ARIZONA=y
CONFIG_SND_SOC_WM_HUBS=y
CONFIG_SND_SOC_WM_ADSP=y
CONFIG_SND_SOC_AB8500_CODEC=y
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_AD1836=y
CONFIG_SND_SOC_AD193X=y
CONFIG_SND_SOC_AD193X_SPI=y
CONFIG_SND_SOC_AD193X_I2C=y
CONFIG_SND_SOC_AD1980=y
CONFIG_SND_SOC_AD73311=y
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1372=y
CONFIG_SND_SOC_ADAU1372_I2C=y
CONFIG_SND_SOC_ADAU1372_SPI=y
CONFIG_SND_SOC_ADAU1373=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU17X1=y
CONFIG_SND_SOC_ADAU1761=y
CONFIG_SND_SOC_ADAU1761_I2C=y
CONFIG_SND_SOC_ADAU1761_SPI=y
CONFIG_SND_SOC_ADAU1781=y
CONFIG_SND_SOC_ADAU1781_I2C=y
CONFIG_SND_SOC_ADAU1781_SPI=y
CONFIG_SND_SOC_ADAU1977=y
CONFIG_SND_SOC_ADAU1977_SPI=y
CONFIG_SND_SOC_ADAU1977_I2C=y
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_ADAU7118=y
CONFIG_SND_SOC_ADAU7118_HW=y
CONFIG_SND_SOC_ADAU7118_I2C=y
CONFIG_SND_SOC_ADAV80X=y
CONFIG_SND_SOC_ADAV801=y
CONFIG_SND_SOC_ADAV803=y
CONFIG_SND_SOC_ADS117X=y
CONFIG_SND_SOC_AK4104=y
CONFIG_SND_SOC_AK4118=y
CONFIG_SND_SOC_AK4375=y
CONFIG_SND_SOC_AK4458=y
CONFIG_SND_SOC_AK4535=y
CONFIG_SND_SOC_AK4554=y
CONFIG_SND_SOC_AK4613=y
CONFIG_SND_SOC_AK4641=y
CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_AK4671=y
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=y
CONFIG_SND_SOC_ALC5623=y
CONFIG_SND_SOC_ALC5632=y
CONFIG_SND_SOC_AW8738=y
CONFIG_SND_SOC_BD28623=y
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CPCAP=y
CONFIG_SND_SOC_CQ0093VC=y
CONFIG_SND_SOC_CROS_EC_CODEC=y
CONFIG_SND_SOC_CS35L32=y
CONFIG_SND_SOC_CS35L33=y
CONFIG_SND_SOC_CS35L34=y
CONFIG_SND_SOC_CS35L35=y
CONFIG_SND_SOC_CS35L36=y
CONFIG_SND_SOC_CS35L41_LIB=y
CONFIG_SND_SOC_CS35L41=y
CONFIG_SND_SOC_CS35L41_SPI=y
CONFIG_SND_SOC_CS35L41_I2C=y
CONFIG_SND_SOC_CS35L45_TABLES=y
CONFIG_SND_SOC_CS35L45=y
CONFIG_SND_SOC_CS35L45_SPI=y
CONFIG_SND_SOC_CS35L45_I2C=y
CONFIG_SND_SOC_CS42L42=y
CONFIG_SND_SOC_CS42L51=y
CONFIG_SND_SOC_CS42L51_I2C=y
CONFIG_SND_SOC_CS42L52=y
CONFIG_SND_SOC_CS42L56=y
CONFIG_SND_SOC_CS42L73=y
CONFIG_SND_SOC_CS4234=y
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4271=y
CONFIG_SND_SOC_CS4271_I2C=y
CONFIG_SND_SOC_CS4271_SPI=y
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=y
CONFIG_SND_SOC_CS4341=y
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS47L15=y
CONFIG_SND_SOC_CS47L24=y
CONFIG_SND_SOC_CS47L35=y
CONFIG_SND_SOC_CS47L85=y
CONFIG_SND_SOC_CS47L90=y
CONFIG_SND_SOC_CS47L92=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_CX20442=y
CONFIG_SND_SOC_CX2072X=y
CONFIG_SND_SOC_JZ4740_CODEC=y
CONFIG_SND_SOC_JZ4725B_CODEC=y
CONFIG_SND_SOC_JZ4760_CODEC=y
CONFIG_SND_SOC_JZ4770_CODEC=y
CONFIG_SND_SOC_L3=y
CONFIG_SND_SOC_DA7210=y
CONFIG_SND_SOC_DA7213=y
CONFIG_SND_SOC_DA7218=y
CONFIG_SND_SOC_DA7219=y
CONFIG_SND_SOC_DA732X=y
CONFIG_SND_SOC_DA9055=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
CONFIG_SND_SOC_ES7134=y
CONFIG_SND_SOC_ES7241=y
CONFIG_SND_SOC_ES8316=y
CONFIG_SND_SOC_ES8328=y
CONFIG_SND_SOC_ES8328_I2C=y
CONFIG_SND_SOC_ES8328_SPI=y
CONFIG_SND_SOC_GTM601=y
CONFIG_SND_SOC_HDAC_HDMI=y
CONFIG_SND_SOC_HDAC_HDA=y
CONFIG_SND_SOC_HDA=y
CONFIG_SND_SOC_ICS43432=y
CONFIG_SND_SOC_INNO_RK3036=y
CONFIG_SND_SOC_ISABELLE=y
CONFIG_SND_SOC_LM49453=y
CONFIG_SND_SOC_LOCHNAGAR_SC=y
CONFIG_SND_SOC_MADERA=y
CONFIG_SND_SOC_MAX98088=y
CONFIG_SND_SOC_MAX98090=y
CONFIG_SND_SOC_MAX98095=y
CONFIG_SND_SOC_MAX98357A=y
CONFIG_SND_SOC_MAX98371=y
CONFIG_SND_SOC_MAX98504=y
CONFIG_SND_SOC_MAX9867=y
CONFIG_SND_SOC_MAX98925=y
CONFIG_SND_SOC_MAX98926=y
CONFIG_SND_SOC_MAX98927=y
CONFIG_SND_SOC_MAX98520=y
CONFIG_SND_SOC_MAX98373=y
CONFIG_SND_SOC_MAX98373_I2C=y
CONFIG_SND_SOC_MAX98373_SDW=y
CONFIG_SND_SOC_MAX98390=y
CONFIG_SND_SOC_MAX98396=y
CONFIG_SND_SOC_MAX9850=y
CONFIG_SND_SOC_MAX9860=y
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=y
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=y
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM1789=y
CONFIG_SND_SOC_PCM1789_I2C=y
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
CONFIG_SND_SOC_PCM179X_SPI=y
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM186X_SPI=y
CONFIG_SND_SOC_PCM3008=y
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
CONFIG_SND_SOC_PCM3060_SPI=y
CONFIG_SND_SOC_PCM3168A=y
CONFIG_SND_SOC_PCM3168A_I2C=y
CONFIG_SND_SOC_PCM3168A_SPI=y
CONFIG_SND_SOC_PCM5102A=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
CONFIG_SND_SOC_PCM512x_SPI=y
CONFIG_SND_SOC_RK3328=y
CONFIG_SND_SOC_RK817=y
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RL6347A=y
CONFIG_SND_SOC_RT274=y
CONFIG_SND_SOC_RT286=y
CONFIG_SND_SOC_RT298=y
CONFIG_SND_SOC_RT1011=y
CONFIG_SND_SOC_RT1015=y
CONFIG_SND_SOC_RT1015P=y
CONFIG_SND_SOC_RT1016=y
CONFIG_SND_SOC_RT1019=y
CONFIG_SND_SOC_RT1305=y
CONFIG_SND_SOC_RT1308=y
CONFIG_SND_SOC_RT1308_SDW=y
CONFIG_SND_SOC_RT1316_SDW=y
CONFIG_SND_SOC_RT5514=y
CONFIG_SND_SOC_RT5514_SPI=y
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5640=y
CONFIG_SND_SOC_RT5645=y
CONFIG_SND_SOC_RT5651=y
CONFIG_SND_SOC_RT5659=y
CONFIG_SND_SOC_RT5660=y
CONFIG_SND_SOC_RT5663=y
CONFIG_SND_SOC_RT5665=y
CONFIG_SND_SOC_RT5668=y
CONFIG_SND_SOC_RT5670=y
CONFIG_SND_SOC_RT5677=y
CONFIG_SND_SOC_RT5677_SPI=y
CONFIG_SND_SOC_RT5682=y
CONFIG_SND_SOC_RT5682_I2C=y
CONFIG_SND_SOC_RT5682_SDW=y
CONFIG_SND_SOC_RT5682S=y
CONFIG_SND_SOC_RT700=y
CONFIG_SND_SOC_RT700_SDW=y
CONFIG_SND_SOC_RT711=y
CONFIG_SND_SOC_RT711_SDW=y
CONFIG_SND_SOC_RT711_SDCA_SDW=y
CONFIG_SND_SOC_RT715=y
CONFIG_SND_SOC_RT715_SDW=y
CONFIG_SND_SOC_RT715_SDCA_SDW=y
CONFIG_SND_SOC_RT9120=y
CONFIG_SND_SOC_SDW_MOCKUP=y
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SI476X=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIGMADSP_REGMAP=y
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
CONFIG_SND_SOC_SIMPLE_MUX=y
CONFIG_SND_SOC_SPDIF=y
CONFIG_SND_SOC_SSM2305=y
CONFIG_SND_SOC_SSM2518=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_SPI=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
CONFIG_SND_SOC_STA32X=y
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STA529=y
CONFIG_SND_SOC_STAC9766=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
CONFIG_SND_SOC_TAS2562=y
CONFIG_SND_SOC_TAS2764=y
CONFIG_SND_SOC_TAS2770=y
CONFIG_SND_SOC_TAS2780=y
CONFIG_SND_SOC_TAS5086=y
CONFIG_SND_SOC_TAS571X=y
CONFIG_SND_SOC_TAS5720=y
CONFIG_SND_SOC_TAS5805M=y
CONFIG_SND_SOC_TAS6424=y
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TFA989X=y
CONFIG_SND_SOC_TLV320ADC3XXX=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
CONFIG_SND_SOC_TLV320AIC23_SPI=y
CONFIG_SND_SOC_TLV320AIC26=y
CONFIG_SND_SOC_TLV320AIC31XX=y
CONFIG_SND_SOC_TLV320AIC32X4=y
CONFIG_SND_SOC_TLV320AIC32X4_I2C=y
CONFIG_SND_SOC_TLV320AIC32X4_SPI=y
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TLV320AIC3X_I2C=y
CONFIG_SND_SOC_TLV320AIC3X_SPI=y
CONFIG_SND_SOC_TLV320DAC33=y
CONFIG_SND_SOC_TLV320ADCX140=y
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_TSCS42XX=y
CONFIG_SND_SOC_TSCS454=y
CONFIG_SND_SOC_TWL4030=y
CONFIG_SND_SOC_TWL6040=y
CONFIG_SND_SOC_UDA1334=y
CONFIG_SND_SOC_UDA134X=y
CONFIG_SND_SOC_UDA1380=y
CONFIG_SND_SOC_WCD9335=y
CONFIG_SND_SOC_WCD_MBHC=y
CONFIG_SND_SOC_WCD934X=y
CONFIG_SND_SOC_WCD938X=y
CONFIG_SND_SOC_WCD938X_SDW=y
CONFIG_SND_SOC_WL1273=y
CONFIG_SND_SOC_WM0010=y
CONFIG_SND_SOC_WM1250_EV1=y
CONFIG_SND_SOC_WM2000=y
CONFIG_SND_SOC_WM2200=y
CONFIG_SND_SOC_WM5100=y
CONFIG_SND_SOC_WM5102=y
CONFIG_SND_SOC_WM5110=y
CONFIG_SND_SOC_WM8350=y
CONFIG_SND_SOC_WM8400=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8727=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8731_I2C=y
CONFIG_SND_SOC_WM8731_SPI=y
CONFIG_SND_SOC_WM8737=y
CONFIG_SND_SOC_WM8741=y
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8770=y
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8782=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8804_SPI=y
CONFIG_SND_SOC_WM8900=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8904=y
CONFIG_SND_SOC_WM8940=y
CONFIG_SND_SOC_WM8955=y
CONFIG_SND_SOC_WM8960=y
CONFIG_SND_SOC_WM8961=y
CONFIG_SND_SOC_WM8962=y
CONFIG_SND_SOC_WM8971=y
CONFIG_SND_SOC_WM8974=y
CONFIG_SND_SOC_WM8978=y
CONFIG_SND_SOC_WM8983=y
CONFIG_SND_SOC_WM8985=y
CONFIG_SND_SOC_WM8988=y
CONFIG_SND_SOC_WM8990=y
CONFIG_SND_SOC_WM8991=y
CONFIG_SND_SOC_WM8993=y
CONFIG_SND_SOC_WM8994=y
CONFIG_SND_SOC_WM8995=y
CONFIG_SND_SOC_WM8996=y
CONFIG_SND_SOC_WM8997=y
CONFIG_SND_SOC_WM8998=y
CONFIG_SND_SOC_WM9081=y
CONFIG_SND_SOC_WM9090=y
CONFIG_SND_SOC_WM9705=y
CONFIG_SND_SOC_WM9712=y
CONFIG_SND_SOC_WM9713=y
CONFIG_SND_SOC_WSA881X=y
CONFIG_SND_SOC_WSA883X=y
CONFIG_SND_SOC_ZL38060=y
CONFIG_SND_SOC_LM4857=y
CONFIG_SND_SOC_MAX9759=y
CONFIG_SND_SOC_MAX9768=y
CONFIG_SND_SOC_MAX9877=y
CONFIG_SND_SOC_MC13783=y
CONFIG_SND_SOC_ML26124=y
CONFIG_SND_SOC_MT6351=y
CONFIG_SND_SOC_MT6358=y
CONFIG_SND_SOC_MT6359=y
CONFIG_SND_SOC_MT6359_ACCDET=y
CONFIG_SND_SOC_MT6660=y
CONFIG_SND_SOC_NAU8315=y
CONFIG_SND_SOC_NAU8540=y
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8821=y
CONFIG_SND_SOC_NAU8822=y
CONFIG_SND_SOC_NAU8824=y
CONFIG_SND_SOC_NAU8825=y
CONFIG_SND_SOC_TPA6130A2=y
CONFIG_SND_SOC_LPASS_MACRO_COMMON=y
CONFIG_SND_SOC_LPASS_WSA_MACRO=y
CONFIG_SND_SOC_LPASS_VA_MACRO=y
CONFIG_SND_SOC_LPASS_RX_MACRO=y
CONFIG_SND_SOC_LPASS_TX_MACRO=y
# end of CODEC drivers

CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD2=y
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE=y
CONFIG_SND_TEST_COMPONENT=y
CONFIG_SND_VIRTIO=y
CONFIG_AC97_BUS=y

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACCUTOUCH=y
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=y
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
CONFIG_HID_BETOP_FF=y
CONFIG_HID_BIGBEN_FF=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CORSAIR=y
CONFIG_HID_COUGAR=y
CONFIG_HID_MACALLY=y
CONFIG_HID_PRODIKEYS=y
CONFIG_HID_CMEDIA=y
CONFIG_HID_CP2112=y
CONFIG_HID_CREATIVE_SB0540=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELAN=y
CONFIG_HID_ELECOM=y
CONFIG_HID_ELO=y
CONFIG_HID_EZKEY=y
CONFIG_HID_FT260=y
CONFIG_HID_GEMBIRD=y
CONFIG_HID_GFRM=y
CONFIG_HID_GLORIOUS=y
CONFIG_HID_HOLTEK=y
CONFIG_HOLTEK_FF=y
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_GOOGLE_HAMMER=y
CONFIG_HID_VIVALDI=y
CONFIG_HID_GT683R=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_VIEWSONIC=y
CONFIG_HID_XIAOMI=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
CONFIG_HID_LETSKETCH=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_HID_LOGITECH_HIDPP=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=y
CONFIG_HID_MAYFLASH=y
CONFIG_HID_MEGAWORLD_FF=y
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=y
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PLAYSTATION=y
CONFIG_PLAYSTATION_FF=y
CONFIG_HID_RAZER=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_RETRODE=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SEMITEK=y
CONFIG_HID_SIGMAMICRO=y
CONFIG_HID_SONY=y
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_U2FZERO=y
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
CONFIG_HID_ALPS=y
CONFIG_HID_MCP2221=y
CONFIG_HID_KUNIT_TEST=y
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support

#
# I2C HID support
#
CONFIG_I2C_HID_OF=y
CONFIG_I2C_HID_OF_ELAN=y
CONFIG_I2C_HID_OF_GOODIX=y
# end of I2C HID support

CONFIG_I2C_HID_CORE=y
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_FEW_INIT_RETRIES=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG_PRODUCTLIST=y
CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI_RENESAS=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_XHCI_HISTB=y
CONFIG_USB_XHCI_MTK=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_XHCI_RCAR=y
CONFIG_USB_EHCI_BRCMSTB=y
CONFIG_USB_BRCMSTB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_NPCM7XX=y
CONFIG_USB_EHCI_HCD_OMAP=y
CONFIG_USB_EHCI_HCD_ORION=y
CONFIG_USB_EHCI_HCD_SPEAR=y
CONFIG_USB_EHCI_HCD_STI=y
CONFIG_USB_EHCI_HCD_AT91=y
CONFIG_USB_EHCI_SH=y
CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_MV=y
CONFIG_USB_CNS3XXX_EHCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_FOTG210_HCD=y
CONFIG_USB_MAX3421_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SPEAR=y
CONFIG_USB_OHCI_HCD_STI=y
CONFIG_USB_OHCI_HCD_S3C2410=y
CONFIG_USB_OHCI_HCD_LPC32XX=y
CONFIG_USB_OHCI_HCD_AT91=y
CONFIG_USB_OHCI_HCD_OMAP3=y
CONFIG_USB_OHCI_HCD_DAVINCI=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_SH=y
CONFIG_USB_OHCI_EXYNOS=y
CONFIG_USB_CNS3XXX_OHCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_RENESAS_USBHS_HCD=y
CONFIG_USB_HCD_BCMA=y
CONFIG_USB_HCD_SSB=y
CONFIG_USB_HCD_TEST_MODE=y
CONFIG_USB_RENESAS_USBHS=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_STORAGE_ENE_UB6250=y
CONFIG_USB_UAS=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
CONFIG_USBIP_CORE=y
CONFIG_USBIP_VHCI_HCD=y
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=y
CONFIG_USBIP_VUDC=y
CONFIG_USBIP_DEBUG=y
CONFIG_USB_CDNS_SUPPORT=y
CONFIG_USB_CDNS_HOST=y
CONFIG_USB_CDNS3=y
CONFIG_USB_CDNS3_GADGET=y
CONFIG_USB_CDNS3_HOST=y
CONFIG_USB_CDNS3_TI=y
CONFIG_USB_CDNS3_IMX=y
CONFIG_USB_MTU3=y
# CONFIG_USB_MTU3_HOST is not set
# CONFIG_USB_MTU3_GADGET is not set
CONFIG_USB_MTU3_DUAL_ROLE=y
CONFIG_USB_MTU3_DEBUG=y
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y

#
# Platform Glue Layer
#
CONFIG_USB_MUSB_TUSB6010=y
CONFIG_USB_MUSB_DSPS=y
CONFIG_USB_MUSB_UX500=y
CONFIG_USB_MUSB_MEDIATEK=y
CONFIG_USB_MUSB_POLARFIRE_SOC=y

#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_ULPI=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OMAP=y
CONFIG_USB_DWC3_EXYNOS=y
CONFIG_USB_DWC3_KEYSTONE=y
CONFIG_USB_DWC3_MESON_G12A=y
CONFIG_USB_DWC3_OF_SIMPLE=y
CONFIG_USB_DWC3_ST=y
CONFIG_USB_DWC3_QCOM=y
CONFIG_USB_DWC3_IMX8MP=y
CONFIG_USB_DWC3_AM62=y
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_HOST is not set

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
CONFIG_USB_DWC2_DEBUG=y
CONFIG_USB_DWC2_VERBOSE=y
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
CONFIG_USB_DWC2_DEBUG_PERIODIC=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA_MSM=y
CONFIG_USB_CHIPIDEA_IMX=y
CONFIG_USB_CHIPIDEA_GENERIC=y
CONFIG_USB_CHIPIDEA_TEGRA=y
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y

#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=y
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_F81232=y
CONFIG_USB_SERIAL_F8153X=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_METRO=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MXUPORT=y
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
CONFIG_USB_SERIAL_QUALCOMM=y
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=y
CONFIG_USB_SERIAL_SSU100=y
CONFIG_USB_SERIAL_QT2=y
CONFIG_USB_SERIAL_UPD78F0730=y
CONFIG_USB_SERIAL_XR=y
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_QCOM_EUD=y
CONFIG_APPLE_MFI_FASTCHARGE=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_HSIC_USB4604=y
CONFIG_USB_LINK_LAYER_TEST=y
CONFIG_USB_CHAOSKEY=y
CONFIG_BRCM_USB_PINMAP=y
CONFIG_USB_ONBOARD_HUB=y
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
CONFIG_USB_CXACRU=y
CONFIG_USB_UEAGLEATM=y
CONFIG_USB_XUSBATM=y

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_AM335X_CONTROL_USB=y
CONFIG_AM335X_PHY_USB=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=y
CONFIG_USB_TEGRA_PHY=y
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_JZ4770_PHY=y
# end of USB Physical Layer drivers

CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_VERBOSE=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y

#
# USB Peripheral Controller
#
CONFIG_USB_LPC32XX=y
CONFIG_USB_FUSB300=y
CONFIG_USB_FOTG210_UDC=y
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
CONFIG_USB_RENESAS_USBHS_UDC=y
CONFIG_USB_RENESAS_USB3=y
CONFIG_USB_PXA27X=y
CONFIG_USB_MV_UDC=y
CONFIG_USB_MV_U3D=y
CONFIG_USB_SNP_CORE=y
CONFIG_USB_SNP_UDC_PLAT=y
CONFIG_USB_M66592=y
CONFIG_USB_BDC_UDC=y
CONFIG_USB_NET2272=y
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_GADGET_XILINX=y
CONFIG_USB_MAX3420_UDC=y
CONFIG_USB_ASPEED_UDC=y
CONFIG_USB_ASPEED_VHUB=y
CONFIG_USB_DUMMY_HCD=y
# end of USB Peripheral Controller

CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_F_SS_LB=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_U_ETHER=y
CONFIG_USB_U_AUDIO=y
CONFIG_USB_F_SERIAL=y
CONFIG_USB_F_OBEX=y
CONFIG_USB_F_NCM=y
CONFIG_USB_F_ECM=y
CONFIG_USB_F_PHONET=y
CONFIG_USB_F_EEM=y
CONFIG_USB_F_SUBSET=y
CONFIG_USB_F_RNDIS=y
CONFIG_USB_F_MASS_STORAGE=y
CONFIG_USB_F_FS=y
CONFIG_USB_F_UAC1=y
CONFIG_USB_F_UAC1_LEGACY=y
CONFIG_USB_F_UAC2=y
CONFIG_USB_F_UVC=y
CONFIG_USB_F_MIDI=y
CONFIG_USB_F_HID=y
CONFIG_USB_F_PRINTER=y
CONFIG_USB_F_TCM=y
CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_PHONET=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_CONFIGFS_F_TCM=y

#
# USB Gadget precomposed configurations
#
CONFIG_USB_ZERO=y
CONFIG_USB_AUDIO=y
CONFIG_GADGET_UAC1=y
CONFIG_GADGET_UAC1_LEGACY=y
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=y
CONFIG_USB_GADGETFS=y
CONFIG_USB_FUNCTIONFS=y
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=y
CONFIG_USB_GADGET_TARGET=y
CONFIG_USB_G_SERIAL=y
CONFIG_USB_MIDI_GADGET=y
CONFIG_USB_G_PRINTER=y
CONFIG_USB_CDC_COMPOSITE=y
CONFIG_USB_G_NOKIA=y
CONFIG_USB_G_ACM_MS=y
CONFIG_USB_G_MULTI=y
CONFIG_USB_G_MULTI_RNDIS=y
CONFIG_USB_G_MULTI_CDC=y
CONFIG_USB_G_HID=y
CONFIG_USB_G_DBGP=y
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=y
CONFIG_USB_RAW_GADGET=y
# end of USB Gadget precomposed configurations

CONFIG_TYPEC=y
CONFIG_TYPEC_TCPM=y
CONFIG_TYPEC_TCPCI=y
CONFIG_TYPEC_RT1711H=y
CONFIG_TYPEC_MT6360=y
CONFIG_TYPEC_TCPCI_MAXIM=y
CONFIG_TYPEC_FUSB302=y
CONFIG_TYPEC_TPS6598X=y
CONFIG_TYPEC_ANX7411=y
CONFIG_TYPEC_RT1719=y
CONFIG_TYPEC_HD3SS3220=y
CONFIG_TYPEC_STUSB160X=y
CONFIG_TYPEC_QCOM_PMIC=y
CONFIG_TYPEC_WUSB3801=y

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_FSA4480=y
CONFIG_TYPEC_MUX_PI3USB30532=y
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=y
CONFIG_TYPEC_NVIDIA_ALTMODE=y
# end of USB Type-C Alternate Mode drivers

CONFIG_USB_ROLE_SWITCH=y
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SD8787=y
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y
CONFIG_MMC_CRYPTO=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_OF_ASPEED=y
CONFIG_MMC_SDHCI_OF_ASPEED_TEST=y
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_MMC_SDHCI_OF_DWCMSHC=y
CONFIG_MMC_SDHCI_OF_SPARX5=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SDHCI_CNS3XXX=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_DOVE=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_S3C=y
CONFIG_MMC_SDHCI_PXAV3=y
CONFIG_MMC_SDHCI_PXAV2=y
CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_MMC_SDHCI_S3C_DMA=y
CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_SDHCI_MILBEAUT=y
CONFIG_MMC_SDHCI_IPROC=y
CONFIG_MMC_MESON_GX=y
CONFIG_MMC_MESON_MX_SDHC=y
CONFIG_MMC_MESON_MX_SDIO=y
CONFIG_MMC_MOXART=y
CONFIG_MMC_SDHCI_ST=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_DAVINCI=y
CONFIG_MMC_SPI=y
CONFIG_MMC_S3C=y
CONFIG_MMC_S3C_HW_SDIO_IRQ=y
CONFIG_MMC_S3C_PIO=y
# CONFIG_MMC_S3C_DMA is not set
CONFIG_MMC_SDHCI_SPRD=y
CONFIG_MMC_TMIO_CORE=y
CONFIG_MMC_TMIO=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_SDHI_SYS_DMAC=y
CONFIG_MMC_SDHI_INTERNAL_DMAC=y
CONFIG_MMC_UNIPHIER=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_BLUEFIELD=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_HI3798CV200=y
CONFIG_MMC_DW_K3=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
CONFIG_MMC_USDHI6ROL0=y
CONFIG_MMC_REALTEK_USB=y
CONFIG_MMC_SUNXI=y
CONFIG_MMC_CQHCI=y
CONFIG_MMC_HSQ=y
CONFIG_MMC_BCM2835=y
CONFIG_MMC_MTK=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_MMC_SDHCI_OMAP=y
CONFIG_MMC_SDHCI_AM654=y
CONFIG_MMC_OWL=y
CONFIG_MMC_SDHCI_EXTERNAL_DMA=y
CONFIG_MMC_LITEX=y
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFS_CRYPTO=y
CONFIG_SCSI_UFS_HPB=y
CONFIG_SCSI_UFS_FAULT_INJECTION=y
CONFIG_SCSI_UFS_HWMON=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_UFS_CDNS_PLATFORM=y
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=y
CONFIG_SCSI_UFS_HISI=y
CONFIG_SCSI_UFS_RENESAS=y
CONFIG_SCSI_UFS_TI_J721E=y
CONFIG_SCSI_UFS_EXYNOS=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_REALTEK_USB=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_AN30259A=y
CONFIG_LEDS_ARIEL=y
CONFIG_LEDS_AW2013=y
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
CONFIG_LEDS_CPCAP=y
CONFIG_LEDS_CR0014114=y
CONFIG_LEDS_EL15203000=y
CONFIG_LEDS_TURRIS_OMNIA=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3532=y
CONFIG_LEDS_LM3533=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_MT6323=y
CONFIG_LEDS_S3C24XX=y
CONFIG_LEDS_COBALT_QUBE=y
CONFIG_LEDS_COBALT_RAQ=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_WM8350=y
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_ASIC3=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77650=y
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_OT200=y
CONFIG_LEDS_MENF21BMC=y
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y
CONFIG_LEDS_SC27XX_BLTC=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_PM8058=y
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_SPI_BYTE=y
CONFIG_LEDS_TI_LMU_COMMON=y
CONFIG_LEDS_LM3697=y
CONFIG_LEDS_LM36274=y
CONFIG_LEDS_TPS6105X=y
CONFIG_LEDS_IP30=y
CONFIG_LEDS_ACER_A500=y
CONFIG_LEDS_BCM63138=y
CONFIG_LEDS_LGM=y

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_AS3645A=y
CONFIG_LEDS_KTD2692=y
CONFIG_LEDS_LM3601X=y
CONFIG_LEDS_MAX77693=y
CONFIG_LEDS_MT6360=y
CONFIG_LEDS_RT4505=y
CONFIG_LEDS_RT8515=y
CONFIG_LEDS_SGM3140=y

#
# RGB LED drivers
#
CONFIG_LEDS_PWM_MULTICOLOR=y
CONFIG_LEDS_QCOM_LPG=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_LEDS_TRIGGER_TTY=y

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y

#
# Speakup console speech
#
CONFIG_SPEAKUP=y
CONFIG_SPEAKUP_SERIALIO=y
CONFIG_SPEAKUP_SYNTH_ACNTSA=y
CONFIG_SPEAKUP_SYNTH_ACNTPC=y
CONFIG_SPEAKUP_SYNTH_APOLLO=y
CONFIG_SPEAKUP_SYNTH_AUDPTR=y
CONFIG_SPEAKUP_SYNTH_BNS=y
CONFIG_SPEAKUP_SYNTH_DECTLK=y
CONFIG_SPEAKUP_SYNTH_DECEXT=y
CONFIG_SPEAKUP_SYNTH_DECPC=m
CONFIG_SPEAKUP_SYNTH_DTLK=y
CONFIG_SPEAKUP_SYNTH_KEYPC=y
CONFIG_SPEAKUP_SYNTH_LTLK=y
CONFIG_SPEAKUP_SYNTH_SOFT=y
CONFIG_SPEAKUP_SYNTH_SPKOUT=y
CONFIG_SPEAKUP_SYNTH_TXPRT=y
CONFIG_SPEAKUP_SYNTH_DUMMY=y
# end of Speakup console speech

CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
CONFIG_RDMA_SIW=y
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_SRPT=y
CONFIG_INFINIBAND_ISER=y
CONFIG_INFINIBAND_ISERT=y
CONFIG_INFINIBAND_RTRS=y
CONFIG_INFINIBAND_RTRS_CLIENT=y
CONFIG_INFINIBAND_RTRS_SERVER=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
CONFIG_RTC_LIB_KUNIT_TEST=y
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABEOZ9=y
CONFIG_RTC_DRV_ABX80X=y
CONFIG_RTC_DRV_BRCMSTB=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_HYM8563=y
CONFIG_RTC_DRV_LP8788=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8925=y
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_MAX8997=y
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_NCT3018Y=y
CONFIG_RTC_DRV_RK808=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_ISL12026=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF85363=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BD70528=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_RC5T619=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3028=y
CONFIG_RTC_DRV_RV3032=y
CONFIG_RTC_DRV_RV8803=y
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_SD3078=y

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1302=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1343=y
CONFIG_RTC_DRV_DS1347=y
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6916=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RX4581=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_PCF2123=y
CONFIG_RTC_DRV_MCP795=y
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_DS3232_HWMON=y
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_RV3029_HWMON=y
CONFIG_RTC_DRV_RX6110=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_GAMECUBE=y
CONFIG_RTC_DRV_WM831X=y
CONFIG_RTC_DRV_WM8350=y
CONFIG_RTC_DRV_SC27XX=y
CONFIG_RTC_DRV_SPEAR=y
CONFIG_RTC_DRV_PCF50633=y
CONFIG_RTC_DRV_ZYNQMP=y
CONFIG_RTC_DRV_CROS_EC=y
CONFIG_RTC_DRV_NTXEC=y

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_ASM9260=y
CONFIG_RTC_DRV_DAVINCI=y
CONFIG_RTC_DRV_DIGICOLOR=y
CONFIG_RTC_DRV_FSL_FTM_ALARM=y
CONFIG_RTC_DRV_MESON=y
CONFIG_RTC_DRV_MESON_VRTC=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_RTC_DRV_S3C=y
CONFIG_RTC_DRV_EP93XX=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_RTC_DRV_RZN1=y
CONFIG_RTC_DRV_GENERIC=y
CONFIG_RTC_DRV_VT8500=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_ARMADA38X=y
CONFIG_RTC_DRV_CADENCE=y
CONFIG_RTC_DRV_FTRTC010=y
CONFIG_RTC_DRV_STMP=y
CONFIG_RTC_DRV_PCAP=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_JZ4740=y
CONFIG_RTC_DRV_LPC24XX=y
CONFIG_RTC_DRV_LPC32XX=y
CONFIG_RTC_DRV_PM8XXX=y
CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_MXC=y
CONFIG_RTC_DRV_MXC_V2=y
CONFIG_RTC_DRV_SNVS=y
CONFIG_RTC_DRV_MOXART=y
CONFIG_RTC_DRV_MT2712=y
CONFIG_RTC_DRV_MT6397=y
CONFIG_RTC_DRV_MT7622=y
CONFIG_RTC_DRV_XGENE=y
CONFIG_RTC_DRV_R7301=y
CONFIG_RTC_DRV_STM32=y
CONFIG_RTC_DRV_CPCAP=y
CONFIG_RTC_DRV_RTD119X=y
CONFIG_RTC_DRV_ASPEED=y
CONFIG_RTC_DRV_TI_K3=y

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=y
CONFIG_RTC_DRV_GOLDFISH=y
CONFIG_RTC_DRV_MSC313=y
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y

#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_APPLE_ADMAC=y
CONFIG_AXI_DMAC=y
CONFIG_BCM_SBA_RAID=y
CONFIG_DMA_JZ4780=y
CONFIG_DMA_SA11X0=y
CONFIG_DMA_SUN6I=y
CONFIG_DW_AXI_DMAC=y
CONFIG_EP93XX_DMA=y
CONFIG_FSL_EDMA=y
CONFIG_IMG_MDC_DMA=y
CONFIG_INTEL_IDMA64=y
CONFIG_INTEL_IOP_ADMA=y
CONFIG_K3_DMA=y
CONFIG_MCF_EDMA=y
CONFIG_MILBEAUT_HDMAC=y
CONFIG_MILBEAUT_XDMAC=y
CONFIG_MMP_PDMA=y
CONFIG_MMP_TDMA=y
CONFIG_MV_XOR=y
CONFIG_MXS_DMA=y
CONFIG_NBPFAXI_DMA=y
CONFIG_STM32_DMA=y
CONFIG_STM32_DMAMUX=y
CONFIG_STM32_MDMA=y
CONFIG_SPRD_DMA=y
CONFIG_S3C24XX_DMAC=y
CONFIG_TEGRA20_APB_DMA=y
CONFIG_TEGRA210_ADMA=y
CONFIG_TIMB_DMA=y
CONFIG_UNIPHIER_MDMAC=y
CONFIG_UNIPHIER_XDMAC=y
CONFIG_XGENE_DMA=y
CONFIG_XILINX_ZYNQMP_DMA=y
CONFIG_XILINX_ZYNQMP_DPDMA=y
CONFIG_MTK_HSDMA=y
CONFIG_MTK_CQDMA=y
CONFIG_MTK_UART_APDMA=y
CONFIG_QCOM_ADM=y
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_RZN1_DMAMUX=y
CONFIG_SF_PDMA=y
CONFIG_RENESAS_DMA=y
CONFIG_SH_DMAE_BASE=y
CONFIG_SH_DMAE=y
CONFIG_RCAR_DMAC=y
CONFIG_RENESAS_USB_DMAC=y
CONFIG_RZ_DMAC=y
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_DMA_CROSSBAR=y
CONFIG_INTEL_LDMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=y
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_SYSFS_STATS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_IMG_ASCII_LCD=y
CONFIG_HT16K33=y
CONFIG_LCD2S=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_PANEL=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_PRUSS=y
CONFIG_UIO_DFL=y
CONFIG_VFIO=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PLATFORM=y
CONFIG_VFIO_AMBA=y
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=y
CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=y
CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET=y
CONFIG_VFIO_MDEV=y
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_VDPA=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
CONFIG_VDPA=y
CONFIG_VDPA_SIM=y
CONFIG_VDPA_SIM_NET=y
CONFIG_VDPA_SIM_BLOCK=y
CONFIG_VDPA_USER=y
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST_RING=y
CONFIG_VHOST=y
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=y
CONFIG_VHOST_SCSI=y
CONFIG_VHOST_VSOCK=y
CONFIG_VHOST_VDPA=y
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

CONFIG_GREYBUS=y
CONFIG_GREYBUS_ES2=y
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=y
CONFIG_COMEDI_TEST=y
CONFIG_COMEDI_PARPORT=y
CONFIG_COMEDI_SSV_DNP=y
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
CONFIG_COMEDI_PCL724=y
CONFIG_COMEDI_PCL726=y
CONFIG_COMEDI_PCL730=y
CONFIG_COMEDI_PCL812=y
CONFIG_COMEDI_PCL816=y
CONFIG_COMEDI_PCL818=y
CONFIG_COMEDI_PCM3724=y
CONFIG_COMEDI_AMPLC_DIO200_ISA=y
CONFIG_COMEDI_AMPLC_PC236_ISA=y
CONFIG_COMEDI_AMPLC_PC263_ISA=y
CONFIG_COMEDI_RTI800=y
CONFIG_COMEDI_RTI802=y
CONFIG_COMEDI_DAC02=y
CONFIG_COMEDI_DAS16M1=y
CONFIG_COMEDI_DAS08_ISA=y
CONFIG_COMEDI_DAS16=y
CONFIG_COMEDI_DAS800=y
CONFIG_COMEDI_DAS1800=y
CONFIG_COMEDI_DAS6402=y
CONFIG_COMEDI_DT2801=y
CONFIG_COMEDI_DT2811=y
CONFIG_COMEDI_DT2814=y
CONFIG_COMEDI_DT2815=y
CONFIG_COMEDI_DT2817=y
CONFIG_COMEDI_DT282X=y
CONFIG_COMEDI_DMM32AT=y
CONFIG_COMEDI_FL512=y
CONFIG_COMEDI_AIO_AIO12_8=y
CONFIG_COMEDI_AIO_IIRO_16=y
CONFIG_COMEDI_II_PCI20KC=y
CONFIG_COMEDI_C6XDIGIO=y
CONFIG_COMEDI_MPC624=y
CONFIG_COMEDI_ADQ12B=y
CONFIG_COMEDI_NI_AT_A2150=y
CONFIG_COMEDI_NI_AT_AO=y
CONFIG_COMEDI_NI_ATMIO=y
CONFIG_COMEDI_NI_ATMIO16D=y
CONFIG_COMEDI_NI_LABPC_ISA=y
CONFIG_COMEDI_PCMAD=y
CONFIG_COMEDI_PCMDA12=y
CONFIG_COMEDI_PCMMIO=y
CONFIG_COMEDI_PCMUIO=y
CONFIG_COMEDI_MULTIQ3=y
CONFIG_COMEDI_S526=y
CONFIG_COMEDI_PCMCIA_DRIVERS=y
CONFIG_COMEDI_CB_DAS16_CS=y
CONFIG_COMEDI_DAS08_CS=y
CONFIG_COMEDI_NI_DAQ_700_CS=y
CONFIG_COMEDI_NI_DAQ_DIO24_CS=y
CONFIG_COMEDI_NI_LABPC_CS=y
CONFIG_COMEDI_NI_MIO_CS=y
CONFIG_COMEDI_QUATECH_DAQP_CS=y
CONFIG_COMEDI_USB_DRIVERS=y
CONFIG_COMEDI_DT9812=y
CONFIG_COMEDI_NI_USB6501=y
CONFIG_COMEDI_USBDUX=y
CONFIG_COMEDI_USBDUXFAST=y
CONFIG_COMEDI_USBDUXSIGMA=y
CONFIG_COMEDI_VMK80XX=y
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=y
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=y
CONFIG_COMEDI_TESTS_EXAMPLE=y
CONFIG_COMEDI_TESTS_NI_ROUTES=y
CONFIG_STAGING=y
CONFIG_PRISM2_USB=y
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8723BS=m
CONFIG_R8712U=y
CONFIG_R8188EU=m
CONFIG_OCTEON_ETHERNET=y
CONFIG_VT6656=m

#
# IIO staging drivers
#

#
# Accelerometers
#
CONFIG_ADIS16203=y
CONFIG_ADIS16240=y
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD7816=y
# end of Analog to digital converters

#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
CONFIG_ADT7316_SPI=y
CONFIG_ADT7316_I2C=y
# end of Analog digital bi-direction converters

#
# Capacitance to digital converters
#
CONFIG_AD7746=y
# end of Capacitance to digital converters

#
# Direct Digital Synthesis
#
CONFIG_AD9832=y
CONFIG_AD9834=y
# end of Direct Digital Synthesis

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y
# end of Network Analyzer, Impedance Converters

#
# Active energy metering IC
#
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
CONFIG_ADE7854_SPI=y
# end of Active energy metering IC

#
# Resolver to digital converters
#
CONFIG_AD2S1210=y
# end of Resolver to digital converters
# end of IIO staging drivers

CONFIG_USB_EMXX=y
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_HANTRO=y
CONFIG_VIDEO_HANTRO_IMX8M=y
CONFIG_VIDEO_HANTRO_SAMA5D4=y
CONFIG_VIDEO_HANTRO_ROCKCHIP=y
CONFIG_VIDEO_HANTRO_SUNXI=y
CONFIG_VIDEO_IMX_MEDIA=y

#
# i.MX5/6/7/8 Media Sub devices
#
CONFIG_VIDEO_IMX_CSI=y
CONFIG_VIDEO_IMX7_CSI=y
# end of i.MX5/6/7/8 Media Sub devices

CONFIG_VIDEO_MAX96712=y
CONFIG_VIDEO_MESON_VDEC=y
CONFIG_VIDEO_OMAP4=y
CONFIG_VIDEO_ROCKCHIP_VDEC=y
CONFIG_VIDEO_STKWEBCAM=y
CONFIG_VIDEO_SUNXI=y
CONFIG_VIDEO_SUNXI_CEDRUS=y
CONFIG_STAGING_BOARD=y
CONFIG_LTE_GDM724X=m
CONFIG_FIREWIRE_SERIAL=y
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
CONFIG_FB_TFT=y
CONFIG_FB_TFT_AGM1264K_FL=y
CONFIG_FB_TFT_BD663474=y
CONFIG_FB_TFT_HX8340BN=y
CONFIG_FB_TFT_HX8347D=y
CONFIG_FB_TFT_HX8353D=y
CONFIG_FB_TFT_HX8357D=y
CONFIG_FB_TFT_ILI9163=y
CONFIG_FB_TFT_ILI9320=y
CONFIG_FB_TFT_ILI9325=y
CONFIG_FB_TFT_ILI9340=y
CONFIG_FB_TFT_ILI9341=y
CONFIG_FB_TFT_ILI9481=y
CONFIG_FB_TFT_ILI9486=y
CONFIG_FB_TFT_PCD8544=y
CONFIG_FB_TFT_RA8875=y
CONFIG_FB_TFT_S6D02A1=y
CONFIG_FB_TFT_S6D1121=y
CONFIG_FB_TFT_SEPS525=y
CONFIG_FB_TFT_SH1106=y
CONFIG_FB_TFT_SSD1289=y
CONFIG_FB_TFT_SSD1305=y
CONFIG_FB_TFT_SSD1306=y
CONFIG_FB_TFT_SSD1331=y
CONFIG_FB_TFT_SSD1351=y
CONFIG_FB_TFT_ST7735R=y
CONFIG_FB_TFT_ST7789V=y
CONFIG_FB_TFT_TINYLCD=y
CONFIG_FB_TFT_TLS8204=y
CONFIG_FB_TFT_UC1611=y
CONFIG_FB_TFT_UC1701=y
CONFIG_FB_TFT_UPD161704=y
CONFIG_MOST_COMPONENTS=y
CONFIG_MOST_NET=y
CONFIG_MOST_VIDEO=y
CONFIG_MOST_DIM2=y
CONFIG_MOST_I2C=y
CONFIG_KS7010=y
CONFIG_GREYBUS_AUDIO=y
CONFIG_GREYBUS_AUDIO_APB_CODEC=y
CONFIG_GREYBUS_BOOTROM=y
CONFIG_GREYBUS_FIRMWARE=y
CONFIG_GREYBUS_HID=y
CONFIG_GREYBUS_LIGHT=y
CONFIG_GREYBUS_LOG=y
CONFIG_GREYBUS_LOOPBACK=y
CONFIG_GREYBUS_POWER=y
CONFIG_GREYBUS_RAW=y
CONFIG_GREYBUS_VIBRATOR=y
CONFIG_GREYBUS_BRIDGED_PHY=y
CONFIG_GREYBUS_GPIO=y
CONFIG_GREYBUS_I2C=y
CONFIG_GREYBUS_PWM=y
CONFIG_GREYBUS_SDIO=y
CONFIG_GREYBUS_SPI=y
CONFIG_GREYBUS_UART=y
CONFIG_GREYBUS_USB=y
CONFIG_GREYBUS_ARCHE=y
CONFIG_BCM_VIDEOCORE=y
CONFIG_BCM2835_VCHIQ=y
CONFIG_VCHIQ_CDEV=y
CONFIG_SND_BCM2835=y
CONFIG_VIDEO_BCM2835=y
CONFIG_BCM2835_VCHIQ_MMAL=y
CONFIG_PI433=y
CONFIG_XIL_AXIS_FIFO=y
CONFIG_FIELDBUS_DEV=y
CONFIG_HMS_ANYBUSS_BUS=y
CONFIG_ARCX_ANYBUS_CONTROLLER=y
CONFIG_HMS_PROFINET=y
CONFIG_GOLDFISH=y
CONFIG_GOLDFISH_PIPE=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_RPMSG=y
CONFIG_CROS_EC_SPI=y
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=y
CONFIG_CROS_EC_CHARDEV=y
CONFIG_CROS_EC_LIGHTBAR=y
CONFIG_CROS_EC_VBC=y
CONFIG_CROS_EC_DEBUGFS=y
CONFIG_CROS_EC_SENSORHUB=y
CONFIG_CROS_EC_SYSFS=y
CONFIG_CROS_EC_TYPEC=y
CONFIG_CROS_USBPD_LOGGER=y
CONFIG_CROS_USBPD_NOTIFY=y
CONFIG_CROS_KUNIT=y
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=y
CONFIG_MLXREG_IO=y
CONFIG_MLXREG_LC=y
CONFIG_NVSW_SN2201=y
CONFIG_OLPC_EC=y
CONFIG_OLPC_XO175=y
CONFIG_OLPC_XO175_EC=y
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=y

#
# Clock driver for ARM Reference designs
#
CONFIG_CLK_ICST=y
CONFIG_CLK_SP810=y
# end of Clock driver for ARM Reference designs

CONFIG_CLK_HSDK=y
CONFIG_LMK04832=y
CONFIG_COMMON_CLK_APPLE_NCO=y
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX9485=y
CONFIG_COMMON_CLK_RK808=y
CONFIG_COMMON_CLK_HI655X=y
CONFIG_COMMON_CLK_SCMI=y
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_SI570=y
CONFIG_COMMON_CLK_BM1880=y
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_TPS68470=y
CONFIG_COMMON_CLK_CDCE925=y
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_EN7523=y
CONFIG_COMMON_CLK_FSL_FLEXSPI=y
CONFIG_COMMON_CLK_FSL_SAI=y
CONFIG_COMMON_CLK_GEMINI=y
CONFIG_COMMON_CLK_LAN966X=y
CONFIG_COMMON_CLK_ASPEED=y
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_CLK_TWL6040=y
CONFIG_COMMON_CLK_AXI_CLKGEN=y
CONFIG_CLK_QORIQ=y
CONFIG_CLK_LS1028A_PLLDIG=y
CONFIG_COMMON_CLK_XGENE=y
CONFIG_COMMON_CLK_LOCHNAGAR=y
CONFIG_COMMON_CLK_PALMAS=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_OXNAS=y
CONFIG_COMMON_CLK_RS9_PCIE=y
CONFIG_COMMON_CLK_VC5=y
CONFIG_COMMON_CLK_MMP2_AUDIO=y
CONFIG_COMMON_CLK_BD718XX=y
CONFIG_COMMON_CLK_FIXED_MMIO=y
CONFIG_CLK_ACTIONS=y
CONFIG_CLK_OWL_S500=y
CONFIG_CLK_OWL_S700=y
CONFIG_CLK_OWL_S900=y
CONFIG_CLK_ANALOGBITS_WRPLL_CLN28HPC=y
CONFIG_CLK_BAIKAL_T1=y
CONFIG_CLK_BT1_CCU_PLL=y
CONFIG_CLK_BT1_CCU_DIV=y
CONFIG_CLK_BCM2711_DVP=y
CONFIG_CLK_BCM2835=y
CONFIG_CLK_BCM_63XX=y
CONFIG_CLK_BCM_63XX_GATE=y
CONFIG_CLK_BCM_KONA=y
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CLK_BCM_CYGNUS=y
CONFIG_CLK_BCM_HR2=y
CONFIG_CLK_BCM_NSP=y
CONFIG_CLK_BCM_NS2=y
CONFIG_CLK_BCM_SR=y
CONFIG_CLK_RASPBERRYPI=y
CONFIG_COMMON_CLK_HI3516CV300=y
CONFIG_COMMON_CLK_HI3519=y
CONFIG_COMMON_CLK_HI3559A=y
CONFIG_COMMON_CLK_HI3660=y
CONFIG_COMMON_CLK_HI3670=y
CONFIG_COMMON_CLK_HI3798CV200=y
CONFIG_COMMON_CLK_HI6220=y
CONFIG_RESET_HISI=y
CONFIG_STUB_CLK_HI6220=y
CONFIG_STUB_CLK_HI3660=y
CONFIG_COMMON_CLK_BOSTON=y
CONFIG_MXC_CLK=y
CONFIG_CLK_IMX8MM=y
CONFIG_CLK_IMX8MN=y
CONFIG_CLK_IMX8MP=y
CONFIG_CLK_IMX8MQ=y
CONFIG_CLK_IMX8ULP=y
CONFIG_CLK_IMX93=y

#
# Ingenic SoCs drivers
#
CONFIG_INGENIC_CGU_COMMON=y
CONFIG_INGENIC_CGU_JZ4740=y
CONFIG_INGENIC_CGU_JZ4725B=y
CONFIG_INGENIC_CGU_JZ4760=y
CONFIG_INGENIC_CGU_JZ4770=y
CONFIG_INGENIC_CGU_JZ4780=y
CONFIG_INGENIC_CGU_X1000=y
CONFIG_INGENIC_CGU_X1830=y
CONFIG_INGENIC_TCU_CLK=y
# end of Ingenic SoCs drivers

CONFIG_COMMON_CLK_KEYSTONE=y
CONFIG_TI_SYSCON_CLK=y

#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
CONFIG_COMMON_CLK_MT2701_MMSYS=y
CONFIG_COMMON_CLK_MT2701_IMGSYS=y
CONFIG_COMMON_CLK_MT2701_VDECSYS=y
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
CONFIG_COMMON_CLK_MT2701_ETHSYS=y
CONFIG_COMMON_CLK_MT2701_BDPSYS=y
CONFIG_COMMON_CLK_MT2701_AUDSYS=y
CONFIG_COMMON_CLK_MT2701_G3DSYS=y
CONFIG_COMMON_CLK_MT2712=y
CONFIG_COMMON_CLK_MT2712_BDPSYS=y
CONFIG_COMMON_CLK_MT2712_IMGSYS=y
CONFIG_COMMON_CLK_MT2712_JPGDECSYS=y
CONFIG_COMMON_CLK_MT2712_MFGCFG=y
CONFIG_COMMON_CLK_MT2712_MMSYS=y
CONFIG_COMMON_CLK_MT2712_VDECSYS=y
CONFIG_COMMON_CLK_MT2712_VENCSYS=y
CONFIG_COMMON_CLK_MT6765=y
CONFIG_COMMON_CLK_MT6765_AUDIOSYS=y
CONFIG_COMMON_CLK_MT6765_CAMSYS=y
CONFIG_COMMON_CLK_MT6765_GCESYS=y
CONFIG_COMMON_CLK_MT6765_MMSYS=y
CONFIG_COMMON_CLK_MT6765_IMGSYS=y
CONFIG_COMMON_CLK_MT6765_VCODECSYS=y
CONFIG_COMMON_CLK_MT6765_MFGSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI0ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI0BSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI1ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI1BSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI2ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI2BSYS=y
CONFIG_COMMON_CLK_MT6779=y
CONFIG_COMMON_CLK_MT6779_MMSYS=y
CONFIG_COMMON_CLK_MT6779_IMGSYS=y
CONFIG_COMMON_CLK_MT6779_IPESYS=y
CONFIG_COMMON_CLK_MT6779_CAMSYS=y
CONFIG_COMMON_CLK_MT6779_VDECSYS=y
CONFIG_COMMON_CLK_MT6779_VENCSYS=y
CONFIG_COMMON_CLK_MT6779_MFGCFG=y
CONFIG_COMMON_CLK_MT6779_AUDSYS=y
CONFIG_COMMON_CLK_MT6797=y
CONFIG_COMMON_CLK_MT6797_MMSYS=y
CONFIG_COMMON_CLK_MT6797_IMGSYS=y
CONFIG_COMMON_CLK_MT6797_VDECSYS=y
CONFIG_COMMON_CLK_MT6797_VENCSYS=y
CONFIG_COMMON_CLK_MT7622=y
CONFIG_COMMON_CLK_MT7622_ETHSYS=y
CONFIG_COMMON_CLK_MT7622_HIFSYS=y
CONFIG_COMMON_CLK_MT7622_AUDSYS=y
CONFIG_COMMON_CLK_MT7629=y
CONFIG_COMMON_CLK_MT7629_ETHSYS=y
CONFIG_COMMON_CLK_MT7629_HIFSYS=y
CONFIG_COMMON_CLK_MT7986=y
CONFIG_COMMON_CLK_MT7986_ETHSYS=y
CONFIG_COMMON_CLK_MT8135=y
CONFIG_COMMON_CLK_MT8167=y
CONFIG_COMMON_CLK_MT8167_AUDSYS=y
CONFIG_COMMON_CLK_MT8167_IMGSYS=y
CONFIG_COMMON_CLK_MT8167_MFGCFG=y
CONFIG_COMMON_CLK_MT8167_MMSYS=y
CONFIG_COMMON_CLK_MT8167_VDECSYS=y
CONFIG_COMMON_CLK_MT8173=y
CONFIG_COMMON_CLK_MT8173_MMSYS=y
CONFIG_COMMON_CLK_MT8183=y
CONFIG_COMMON_CLK_MT8183_AUDIOSYS=y
CONFIG_COMMON_CLK_MT8183_CAMSYS=y
CONFIG_COMMON_CLK_MT8183_IMGSYS=y
CONFIG_COMMON_CLK_MT8183_IPU_CORE0=y
CONFIG_COMMON_CLK_MT8183_IPU_CORE1=y
CONFIG_COMMON_CLK_MT8183_IPU_ADL=y
CONFIG_COMMON_CLK_MT8183_IPU_CONN=y
CONFIG_COMMON_CLK_MT8183_MFGCFG=y
CONFIG_COMMON_CLK_MT8183_MMSYS=y
CONFIG_COMMON_CLK_MT8183_VDECSYS=y
CONFIG_COMMON_CLK_MT8183_VENCSYS=y
CONFIG_COMMON_CLK_MT8186=y
CONFIG_COMMON_CLK_MT8192=y
CONFIG_COMMON_CLK_MT8192_AUDSYS=y
CONFIG_COMMON_CLK_MT8192_CAMSYS=y
CONFIG_COMMON_CLK_MT8192_IMGSYS=y
CONFIG_COMMON_CLK_MT8192_IMP_IIC_WRAP=y
CONFIG_COMMON_CLK_MT8192_IPESYS=y
CONFIG_COMMON_CLK_MT8192_MDPSYS=y
CONFIG_COMMON_CLK_MT8192_MFGCFG=y
CONFIG_COMMON_CLK_MT8192_MMSYS=y
CONFIG_COMMON_CLK_MT8192_MSDC=y
CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
CONFIG_COMMON_CLK_MT8192_VDECSYS=y
CONFIG_COMMON_CLK_MT8192_VENCSYS=y
CONFIG_COMMON_CLK_MT8195=y
CONFIG_COMMON_CLK_MT8516=y
CONFIG_COMMON_CLK_MT8516_AUDSYS=y
# end of Clock driver for MediaTek SoC

#
# Clock support for Amlogic platforms
#
# CONFIG_COMMON_CLK_AXG_AUDIO is not set
# end of Clock support for Amlogic platforms

CONFIG_MSTAR_MSC313_MPLL=y
CONFIG_MCHP_CLK_MPFS=y
CONFIG_COMMON_CLK_PISTACHIO=y
CONFIG_QCOM_GDSC=y
CONFIG_QCOM_RPMCC=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_QCOM_A53PLL=y
CONFIG_QCOM_A7PLL=y
CONFIG_QCOM_CLK_APCS_MSM8916=y
CONFIG_QCOM_CLK_APCS_SDX55=y
CONFIG_QCOM_CLK_SMD_RPM=y
CONFIG_QCOM_CLK_RPMH=y
CONFIG_APQ_GCC_8084=y
CONFIG_APQ_MMCC_8084=y
CONFIG_IPQ_APSS_PLL=y
CONFIG_IPQ_APSS_6018=y
CONFIG_IPQ_GCC_4019=y
CONFIG_IPQ_GCC_6018=y
CONFIG_IPQ_GCC_806X=y
CONFIG_IPQ_LCC_806X=y
CONFIG_IPQ_GCC_8074=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_GCC_8916=y
CONFIG_MSM_GCC_8939=y
CONFIG_MSM_GCC_8960=y
CONFIG_MSM_LCC_8960=y
CONFIG_MDM_GCC_9607=y
CONFIG_MDM_GCC_9615=y
CONFIG_MDM_LCC_9615=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_GCC_8953=y
CONFIG_MSM_GCC_8974=y
CONFIG_MSM_MMCC_8974=y
CONFIG_MSM_GCC_8976=y
CONFIG_MSM_MMCC_8994=y
CONFIG_MSM_GCC_8994=y
CONFIG_MSM_GCC_8996=y
CONFIG_MSM_MMCC_8996=y
CONFIG_MSM_GCC_8998=y
CONFIG_MSM_GPUCC_8998=y
CONFIG_MSM_MMCC_8998=y
CONFIG_QCM_GCC_2290=y
CONFIG_QCM_DISPCC_2290=y
CONFIG_QCS_GCC_404=y
CONFIG_SC_CAMCC_7180=y
CONFIG_SC_CAMCC_7280=y
CONFIG_SC_DISPCC_7180=y
CONFIG_SC_DISPCC_7280=y
CONFIG_SC_GCC_7180=y
CONFIG_SC_GCC_7280=y
CONFIG_SC_GCC_8180X=y
CONFIG_SC_GCC_8280XP=y
CONFIG_SC_GPUCC_7180=y
CONFIG_SC_GPUCC_7280=y
CONFIG_SC_LPASSCC_7280=y
CONFIG_SC_LPASS_CORECC_7180=y
CONFIG_SC_LPASS_CORECC_7280=y
CONFIG_SC_MSS_7180=y
CONFIG_SC_VIDEOCC_7180=y
CONFIG_SC_VIDEOCC_7280=y
CONFIG_SDM_CAMCC_845=y
CONFIG_SDM_GCC_660=y
CONFIG_SDM_MMCC_660=y
CONFIG_SDM_GPUCC_660=y
CONFIG_QCS_TURING_404=y
CONFIG_QCS_Q6SSTOP_404=y
CONFIG_SDM_GCC_845=y
CONFIG_SDM_GPUCC_845=y
CONFIG_SDM_VIDEOCC_845=y
CONFIG_SDM_DISPCC_845=y
CONFIG_SDM_LPASSCC_845=y
CONFIG_SDX_GCC_55=y
CONFIG_SDX_GCC_65=y
CONFIG_SM_CAMCC_8250=y
CONFIG_SM_CAMCC_8450=y
CONFIG_SM_DISPCC_6125=y
CONFIG_SM_DISPCC_8250=y
CONFIG_SM_DISPCC_6350=y
CONFIG_SM_GCC_6115=y
CONFIG_SM_GCC_6125=y
CONFIG_SM_GCC_6350=y
CONFIG_SM_GCC_8150=y
CONFIG_SM_GCC_8250=y
CONFIG_SM_GCC_8350=y
CONFIG_SM_GCC_8450=y
CONFIG_SM_GPUCC_6350=y
CONFIG_SM_GPUCC_8150=y
CONFIG_SM_GPUCC_8250=y
CONFIG_SM_GPUCC_8350=y
CONFIG_SM_VIDEOCC_8150=y
CONFIG_SM_VIDEOCC_8250=y
CONFIG_SPMI_PMIC_CLKDIV=y
CONFIG_QCOM_HFPLL=y
CONFIG_KPSS_XCC=y
CONFIG_CLK_GFM_LPASS_SM8250=y
CONFIG_CLK_MT7621=y
CONFIG_CLK_RENESAS=y
CONFIG_CLK_EMEV2=y
CONFIG_CLK_RZA1=y
CONFIG_CLK_R7S9210=y
CONFIG_CLK_R8A73A4=y
CONFIG_CLK_R8A7740=y
CONFIG_CLK_R8A7742=y
CONFIG_CLK_R8A7743=y
CONFIG_CLK_R8A7745=y
CONFIG_CLK_R8A77470=y
CONFIG_CLK_R8A774A1=y
CONFIG_CLK_R8A774B1=y
CONFIG_CLK_R8A774C0=y
CONFIG_CLK_R8A774E1=y
CONFIG_CLK_R8A7778=y
CONFIG_CLK_R8A7779=y
CONFIG_CLK_R8A7790=y
CONFIG_CLK_R8A7791=y
CONFIG_CLK_R8A7792=y
CONFIG_CLK_R8A7794=y
CONFIG_CLK_R8A7795=y
CONFIG_CLK_R8A77960=y
CONFIG_CLK_R8A77961=y
CONFIG_CLK_R8A77965=y
CONFIG_CLK_R8A77970=y
CONFIG_CLK_R8A77980=y
CONFIG_CLK_R8A77990=y
CONFIG_CLK_R8A77995=y
CONFIG_CLK_R8A779A0=y
CONFIG_CLK_R8A779F0=y
CONFIG_CLK_R8A779G0=y
CONFIG_CLK_R9A06G032=y
CONFIG_CLK_R9A07G043=y
CONFIG_CLK_R9A07G044=y
CONFIG_CLK_R9A07G054=y
CONFIG_CLK_R9A09G011=y
CONFIG_CLK_SH73A0=y
CONFIG_CLK_RCAR_CPG_LIB=y
CONFIG_CLK_RCAR_GEN2_CPG=y
CONFIG_CLK_RCAR_GEN3_CPG=y
CONFIG_CLK_RCAR_GEN4_CPG=y
CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
CONFIG_CLK_RZG2L=y
CONFIG_CLK_RENESAS_CPG_MSSR=y
CONFIG_CLK_RENESAS_CPG_MSTP=y
CONFIG_CLK_RENESAS_DIV6=y
CONFIG_COMMON_CLK_SAMSUNG=y
CONFIG_S3C64XX_COMMON_CLK=y
CONFIG_S5PV210_COMMON_CLK=y
CONFIG_EXYNOS_3250_COMMON_CLK=y
CONFIG_EXYNOS_4_COMMON_CLK=y
CONFIG_EXYNOS_5250_COMMON_CLK=y
CONFIG_EXYNOS_5260_COMMON_CLK=y
CONFIG_EXYNOS_5410_COMMON_CLK=y
CONFIG_EXYNOS_5420_COMMON_CLK=y
CONFIG_EXYNOS_ARM64_COMMON_CLK=y
CONFIG_EXYNOS_AUDSS_CLK_CON=y
CONFIG_EXYNOS_CLKOUT=y
CONFIG_S3C2410_COMMON_CLK=y
CONFIG_S3C2412_COMMON_CLK=y
CONFIG_S3C2443_COMMON_CLK=y
CONFIG_TESLA_FSD_COMMON_CLK=y
CONFIG_CLK_SIFIVE=y
CONFIG_CLK_SIFIVE_PRCI=y
CONFIG_CLK_INTEL_SOCFPGA=y
CONFIG_CLK_INTEL_SOCFPGA32=y
CONFIG_CLK_INTEL_SOCFPGA64=y
CONFIG_SPRD_COMMON_CLK=y
CONFIG_SPRD_SC9860_CLK=y
CONFIG_SPRD_SC9863A_CLK=y
CONFIG_CLK_STARFIVE_JH7100=y
CONFIG_CLK_STARFIVE_JH7100_AUDIO=y
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
CONFIG_SUNXI_CCU=y
CONFIG_SUNIV_F1C100S_CCU=y
CONFIG_SUN20I_D1_CCU=y
CONFIG_SUN20I_D1_R_CCU=y
CONFIG_SUN50I_A64_CCU=y
CONFIG_SUN50I_A100_CCU=y
CONFIG_SUN50I_A100_R_CCU=y
CONFIG_SUN50I_H6_CCU=y
CONFIG_SUN50I_H616_CCU=y
CONFIG_SUN50I_H6_R_CCU=y
CONFIG_SUN4I_A10_CCU=y
CONFIG_SUN5I_CCU=y
CONFIG_SUN6I_A31_CCU=y
CONFIG_SUN6I_RTC_CCU=y
CONFIG_SUN8I_A23_CCU=y
CONFIG_SUN8I_A33_CCU=y
CONFIG_SUN8I_A83T_CCU=y
CONFIG_SUN8I_H3_CCU=y
CONFIG_SUN8I_V3S_CCU=y
CONFIG_SUN8I_DE2_CCU=y
CONFIG_SUN8I_R40_CCU=y
CONFIG_SUN9I_A80_CCU=y
CONFIG_SUN8I_R_CCU=y
CONFIG_COMMON_CLK_TI_ADPLL=y
CONFIG_CLK_UNIPHIER=y
CONFIG_COMMON_CLK_VISCONTI=y
CONFIG_CLK_LGM_CGU=y
CONFIG_XILINX_VCU=y
CONFIG_COMMON_CLK_ZYNQMP=y
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_OMAP=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_HWSPINLOCK_SPRD=y
CONFIG_HWSPINLOCK_STM32=y
CONFIG_HWSPINLOCK_SUN6I=y
CONFIG_HSEM_U8500=y

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_BCM2835_TIMER=y
CONFIG_BCM_KONA_TIMER=y
CONFIG_DAVINCI_TIMER=y
CONFIG_DIGICOLOR_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_DW_APB_TIMER=y
CONFIG_FTTMR010_TIMER=y
CONFIG_IXP4XX_TIMER=y
CONFIG_MESON6_TIMER=y
CONFIG_OWL_TIMER=y
CONFIG_RDA_TIMER=y
CONFIG_SUN4I_TIMER=y
CONFIG_SUN5I_HSTIMER=y
CONFIG_TEGRA_TIMER=y
CONFIG_TEGRA186_TIMER=y
CONFIG_VT8500_TIMER=y
CONFIG_NPCM7XX_TIMER=y
CONFIG_CADENCE_TTC_TIMER=y
CONFIG_ASM9260_TIMER=y
CONFIG_CLKSRC_DBX500_PRCMU=y
CONFIG_CLPS711X_TIMER=y
CONFIG_MXS_TIMER=y
CONFIG_NSPIRE_TIMER=y
CONFIG_INTEGRATOR_AP_TIMER=y
CONFIG_CLKSRC_PISTACHIO=y
CONFIG_CLKSRC_STM32_LP=y
CONFIG_ARMV7M_SYSTICK=y
CONFIG_ATMEL_PIT=y
CONFIG_ATMEL_ST=y
CONFIG_CLKSRC_SAMSUNG_PWM=y
CONFIG_FSL_FTM_TIMER=y
CONFIG_OXNAS_RPS_TIMER=y
CONFIG_MTK_TIMER=y
CONFIG_SPRD_TIMER=y
CONFIG_CLKSRC_JCORE_PIT=y
CONFIG_SH_TIMER_CMT=y
CONFIG_SH_TIMER_MTU2=y
CONFIG_RENESAS_OSTM=y
CONFIG_SH_TIMER_TMU=y
CONFIG_EM_TIMER_STI=y
CONFIG_CLKSRC_PXA=y
CONFIG_TIMER_IMX_SYS_CTR=y
CONFIG_CLKSRC_ST_LPC=y
CONFIG_GXP_TIMER=y
CONFIG_MSC313E_TIMER=y
CONFIG_INGENIC_TIMER=y
CONFIG_INGENIC_SYSOST=y
CONFIG_INGENIC_OST=y
CONFIG_MICROCHIP_PIT64B=y
CONFIG_GOLDFISH_TIMER=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_IMX_MBOX=y
CONFIG_PLATFORM_MHU=y
CONFIG_ARMADA_37XX_RWTM_MBOX=y
CONFIG_ROCKCHIP_MBOX=y
CONFIG_ALTERA_MBOX=y
CONFIG_HI3660_MBOX=y
CONFIG_HI6220_MBOX=y
CONFIG_MAILBOX_TEST=y
CONFIG_POLARFIRE_SOC_MAILBOX=y
CONFIG_QCOM_APCS_IPC=y
CONFIG_BCM_PDC_MBOX=y
CONFIG_STM32_IPCC=y
CONFIG_MTK_ADSP_MBOX=y
CONFIG_MTK_CMDQ_MBOX=y
CONFIG_SUN6I_MSGBOX=y
CONFIG_SPRD_MBOX=y
CONFIG_QCOM_IPCC=y
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST=y
# end of Generic IOMMU Pagetable Support

CONFIG_IOMMU_DEBUGFS=y
CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_OMAP_IOMMU=y
CONFIG_OMAP_IOMMU_DEBUG=y
CONFIG_ROCKCHIP_IOMMU=y
CONFIG_SUN50I_IOMMU=y
CONFIG_S390_CCW_IOMMU=y
CONFIG_S390_AP_IOMMU=y
CONFIG_MTK_IOMMU=y
CONFIG_SPRD_IOMMU=y

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
CONFIG_INGENIC_VPU_RPROC=y
CONFIG_MTK_SCP=y
CONFIG_MESON_MX_AO_ARC_REMOTEPROC=y
CONFIG_RCAR_REMOTEPROC=y
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_MTK_SCP=y
CONFIG_RPMSG_QCOM_GLINK=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_QCOM_GLINK_SMEM=y
CONFIG_RPMSG_QCOM_SMD=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=y

#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_QCOM=y

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=y
CONFIG_MESON_CLK_MEASURE=y
CONFIG_MESON_GX_SOCINFO=y
CONFIG_MESON_MX_SOCINFO=y
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
CONFIG_APPLE_RTKIT=y
CONFIG_APPLE_SART=y
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
CONFIG_ASPEED_LPC_CTRL=y
CONFIG_ASPEED_LPC_SNOOP=y
CONFIG_ASPEED_UART_ROUTING=y
CONFIG_ASPEED_P2A_CTRL=y
CONFIG_ASPEED_SOCINFO=y
# end of ASPEED SoC drivers

CONFIG_AT91_SOC_ID=y
CONFIG_AT91_SOC_SFR=y

#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
CONFIG_SOC_BCM63XX=y
CONFIG_SOC_BRCMSTB=y
CONFIG_BCM63XX_POWER=y
CONFIG_BCM_PMB=y
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
CONFIG_QUICC_ENGINE=y
CONFIG_UCC_SLOW=y
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_QE_TDM=y
CONFIG_FSL_GUTS=y
CONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
CONFIG_SOC_IMX8M=y
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_NPE=y
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers

#
# MediaTek SoC drivers
#
CONFIG_MTK_CMDQ=y
CONFIG_MTK_DEVAPC=y
CONFIG_MTK_INFRACFG=y
CONFIG_MTK_PMIC_WRAP=y
CONFIG_MTK_SCPSYS=y
CONFIG_MTK_MMSYS=y
CONFIG_MTK_SVS=y
# end of MediaTek SoC drivers

CONFIG_POLARFIRE_SOC_SYS_CTRL=y

#
# Qualcomm SoC drivers
#
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_GENI_SE=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_LLCC=y
CONFIG_QCOM_PDR_HELPERS=y
CONFIG_QCOM_QMI_HELPERS=y
CONFIG_QCOM_RPMH=y
CONFIG_QCOM_RPMHPD=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SMEM_STATE=y
CONFIG_QCOM_SMP2P=y
CONFIG_QCOM_SMSM=y
CONFIG_QCOM_SOCINFO=y
CONFIG_QCOM_SPM=y
CONFIG_QCOM_STATS=y
CONFIG_QCOM_WCNSS_CTRL=y
CONFIG_QCOM_APR=y
CONFIG_QCOM_ICC_BWMON=y
# end of Qualcomm SoC drivers

CONFIG_SOC_RENESAS=y
CONFIG_RST_RCAR=y
CONFIG_SYSC_RCAR=y
CONFIG_SYSC_RCAR_GEN4=y
CONFIG_SYSC_R8A77995=y
CONFIG_SYSC_R8A7794=y
CONFIG_SYSC_R8A77990=y
CONFIG_SYSC_R8A7779=y
CONFIG_SYSC_R8A7790=y
CONFIG_SYSC_R8A7795=y
CONFIG_SYSC_R8A7791=y
CONFIG_SYSC_R8A77965=y
CONFIG_SYSC_R8A77960=y
CONFIG_SYSC_R8A77961=y
CONFIG_SYSC_R8A779F0=y
CONFIG_SYSC_R8A7792=y
CONFIG_SYSC_R8A77980=y
CONFIG_SYSC_R8A77970=y
CONFIG_SYSC_R8A779A0=y
CONFIG_SYSC_R8A779G0=y
CONFIG_SYSC_RMOBILE=y
CONFIG_SYSC_R8A77470=y
CONFIG_SYSC_R8A7745=y
CONFIG_SYSC_R8A7742=y
CONFIG_SYSC_R8A7743=y
CONFIG_SYSC_R8A774C0=y
CONFIG_SYSC_R8A774E1=y
CONFIG_SYSC_R8A774A1=y
CONFIG_SYSC_R8A774B1=y
CONFIG_ROCKCHIP_GRF=y
CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_ROCKCHIP_DTPM=m
CONFIG_SOC_SAMSUNG=y
CONFIG_EXYNOS_ASV_ARM=y
CONFIG_EXYNOS_CHIPID=y
CONFIG_EXYNOS_USI=y
CONFIG_EXYNOS_PM_DOMAINS=y
CONFIG_EXYNOS_REGULATOR_COUPLER=y
CONFIG_SUNXI_SRAM=y
CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER=y
CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER=y
CONFIG_SOC_TI=y
CONFIG_UX500_SOC_ID=y

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
CONFIG_ARM_IMX_BUS_DEVFREQ=y
CONFIG_ARM_TEGRA_DEVFREQ=y
CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=y
CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ=y
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=y
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_FSA9480=y
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX77843=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_PTN5150=y
CONFIG_EXTCON_QCOM_SPMI_MISC=y
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
CONFIG_EXTCON_USBC_TUSB320=y
CONFIG_MEMORY=y
CONFIG_DDR=y
CONFIG_ATMEL_SDRAMC=y
CONFIG_ATMEL_EBI=y
CONFIG_BRCMSTB_DPFE=y
CONFIG_BT1_L2_CTL=y
CONFIG_TI_AEMIF=y
CONFIG_TI_EMIF=y
CONFIG_OMAP_GPMC=y
CONFIG_OMAP_GPMC_DEBUG=y
CONFIG_FPGA_DFL_EMIF=y
CONFIG_MVEBU_DEVBUS=y
CONFIG_FSL_CORENET_CF=y
CONFIG_FSL_IFC=y
CONFIG_JZ4780_NEMC=y
CONFIG_MTK_SMI=y
CONFIG_DA8XX_DDRCTL=y
CONFIG_RENESAS_RPCIF=y
CONFIG_STM32_FMC2_EBI=y
CONFIG_SAMSUNG_MC=y
CONFIG_EXYNOS5422_DMC=y
CONFIG_EXYNOS_SROM=y
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=y
CONFIG_TEGRA30_EMC=y
CONFIG_TEGRA124_EMC=y
CONFIG_TEGRA210_EMC_TABLE=y
CONFIG_TEGRA210_EMC=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y

#
# Accelerometers
#
CONFIG_ADIS16201=y
CONFIG_ADIS16209=y
CONFIG_ADXL313=y
CONFIG_ADXL313_I2C=y
CONFIG_ADXL313_SPI=y
CONFIG_ADXL355=y
CONFIG_ADXL355_I2C=y
CONFIG_ADXL355_SPI=y
CONFIG_ADXL367=y
CONFIG_ADXL367_SPI=y
CONFIG_ADXL367_I2C=y
CONFIG_ADXL372=y
CONFIG_ADXL372_SPI=y
CONFIG_ADXL372_I2C=y
CONFIG_BMA220=y
CONFIG_BMA400=y
CONFIG_BMA400_I2C=y
CONFIG_BMA400_SPI=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_BMC150_ACCEL_SPI=y
CONFIG_BMI088_ACCEL=y
CONFIG_BMI088_ACCEL_SPI=y
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD06=y
CONFIG_DMARD09=y
CONFIG_DMARD10=y
CONFIG_FXLS8962AF=y
CONFIG_FXLS8962AF_I2C=y
CONFIG_FXLS8962AF_SPI=y
CONFIG_HID_SENSOR_ACCEL_3D=y
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=y
CONFIG_KXSD9=y
CONFIG_KXSD9_SPI=y
CONFIG_KXSD9_I2C=y
CONFIG_KXCJK1013=y
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
CONFIG_MMA7455_SPI=y
CONFIG_MMA7660=y
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
CONFIG_MXC4005=y
CONFIG_MXC6255=y
CONFIG_SCA3000=y
CONFIG_SCA3300=y
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
CONFIG_AD7091R5=y
CONFIG_AD7124=y
CONFIG_AD7192=y
CONFIG_AD7266=y
CONFIG_AD7280=y
CONFIG_AD7291=y
CONFIG_AD7292=y
CONFIG_AD7298=y
CONFIG_AD7476=y
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD7606_IFACE_SPI=y
CONFIG_AD7766=y
CONFIG_AD7768_1=y
CONFIG_AD7780=y
CONFIG_AD7791=y
CONFIG_AD7793=y
CONFIG_AD7887=y
CONFIG_AD7923=y
CONFIG_AD7949=y
CONFIG_AD799X=y
CONFIG_AD9467=y
CONFIG_ADI_AXI_ADC=y
CONFIG_ASPEED_ADC=y
CONFIG_AT91_ADC=y
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_AXP20X_ADC=y
CONFIG_AXP288_ADC=y
CONFIG_BCM_IPROC_ADC=y
CONFIG_BERLIN2_ADC=y
CONFIG_CC10001_ADC=y
CONFIG_CPCAP_ADC=y
CONFIG_DA9150_GPADC=y
CONFIG_DLN2_ADC=y
CONFIG_ENVELOPE_DETECTOR=y
CONFIG_EXYNOS_ADC=y
CONFIG_MXS_LRADC_ADC=y
CONFIG_FSL_MX25_ADC=y
CONFIG_HI8435=y
CONFIG_HX711=y
CONFIG_INGENIC_ADC=y
CONFIG_IMX7D_ADC=y
CONFIG_IMX8QXP_ADC=y
CONFIG_LP8788_ADC=y
CONFIG_LPC18XX_ADC=y
CONFIG_LPC32XX_ADC=y
CONFIG_LTC2471=y
CONFIG_LTC2485=y
CONFIG_LTC2496=y
CONFIG_LTC2497=y
CONFIG_MAX1027=y
CONFIG_MAX11100=y
CONFIG_MAX1118=y
CONFIG_MAX1241=y
CONFIG_MAX1363=y
CONFIG_MAX9611=y
CONFIG_MCP320X=y
CONFIG_MCP3422=y
CONFIG_MCP3911=y
CONFIG_MEDIATEK_MT6360_ADC=y
CONFIG_MEDIATEK_MT6577_AUXADC=y
CONFIG_MEN_Z188_ADC=y
CONFIG_MESON_SARADC=y
CONFIG_MP2629_ADC=y
CONFIG_NAU7802=y
CONFIG_NPCM_ADC=y
CONFIG_PALMAS_GPADC=y
CONFIG_QCOM_VADC_COMMON=y
CONFIG_QCOM_PM8XXX_XOADC=y
CONFIG_QCOM_SPMI_RRADC=y
CONFIG_QCOM_SPMI_IADC=y
CONFIG_QCOM_SPMI_VADC=y
CONFIG_QCOM_SPMI_ADC5=y
CONFIG_RCAR_GYRO_ADC=y
CONFIG_RN5T618_ADC=y
CONFIG_ROCKCHIP_SARADC=y
CONFIG_RZG2L_ADC=y
CONFIG_SC27XX_ADC=y
CONFIG_SPEAR_ADC=y
CONFIG_SD_ADC_MODULATOR=y
CONFIG_STM32_ADC_CORE=y
CONFIG_STM32_ADC=y
CONFIG_STM32_DFSDM_CORE=y
CONFIG_STM32_DFSDM_ADC=y
CONFIG_STMPE_ADC=y
CONFIG_TI_ADC081C=y
CONFIG_TI_ADC0832=y
CONFIG_TI_ADC084S021=y
CONFIG_TI_ADC12138=y
CONFIG_TI_ADC108S102=y
CONFIG_TI_ADC128S052=y
CONFIG_TI_ADC161S626=y
CONFIG_TI_ADS1015=y
CONFIG_TI_ADS7950=y
CONFIG_TI_ADS8344=y
CONFIG_TI_ADS8688=y
CONFIG_TI_ADS124S08=y
CONFIG_TI_ADS131E08=y
CONFIG_TI_AM335X_ADC=y
CONFIG_TI_TLC4541=y
CONFIG_TI_TSC2046=y
CONFIG_TWL4030_MADC=y
CONFIG_TWL6030_GPADC=y
CONFIG_VF610_ADC=y
CONFIG_VIPERBOARD_ADC=y
CONFIG_XILINX_XADC=y
CONFIG_XILINX_AMS=y
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
CONFIG_AD74413R=y
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
# end of Analog Front Ends

#
# Amplifiers
#
CONFIG_AD8366=y
CONFIG_ADA4250=y
CONFIG_HMC425=y
# end of Amplifiers

#
# Capacitance to digital converters
#
CONFIG_AD7150=y
# end of Capacitance to digital converters

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_ATLAS_EZO_SENSOR=y
CONFIG_BME680=y
CONFIG_BME680_I2C=y
CONFIG_BME680_SPI=y
CONFIG_CCS811=y
CONFIG_IAQCORE=y
CONFIG_PMS7003=y
CONFIG_SCD30_CORE=y
CONFIG_SCD30_I2C=y
CONFIG_SCD30_SERIAL=y
CONFIG_SCD4X=y
CONFIG_SENSIRION_SGP30=y
CONFIG_SENSIRION_SGP40=y
CONFIG_SPS30=y
CONFIG_SPS30_I2C=y
CONFIG_SPS30_SERIAL=y
CONFIG_SENSEAIR_SUNRISE_CO2=y
CONFIG_VZ89X=y
# end of Chemical Sensors

CONFIG_IIO_CROS_EC_SENSORS_CORE=y
CONFIG_IIO_CROS_EC_SENSORS=y
CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE=y

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=y

#
# IIO SCMI Sensors
#
CONFIG_IIO_SCMI=y
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=y
CONFIG_IIO_SSP_SENSORHUB=y
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
CONFIG_AD3552R=y
CONFIG_AD5064=y
CONFIG_AD5360=y
CONFIG_AD5380=y
CONFIG_AD5421=y
CONFIG_AD5446=y
CONFIG_AD5449=y
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=y
CONFIG_AD5593R=y
CONFIG_AD5504=y
CONFIG_AD5624R_SPI=y
CONFIG_LTC2688=y
CONFIG_AD5686=y
CONFIG_AD5686_SPI=y
CONFIG_AD5696_I2C=y
CONFIG_AD5755=y
CONFIG_AD5758=y
CONFIG_AD5761=y
CONFIG_AD5764=y
CONFIG_AD5766=y
CONFIG_AD5770R=y
CONFIG_AD5791=y
CONFIG_AD7293=y
CONFIG_AD7303=y
CONFIG_AD8801=y
CONFIG_DPOT_DAC=y
CONFIG_DS4424=y
CONFIG_LPC18XX_DAC=y
CONFIG_LTC1660=y
CONFIG_LTC2632=y
CONFIG_M62332=y
CONFIG_MAX517=y
CONFIG_MAX5821=y
CONFIG_MCP4725=y
CONFIG_MCP4922=y
CONFIG_STM32_DAC=y
CONFIG_STM32_DAC_CORE=y
CONFIG_TI_DAC082S085=y
CONFIG_TI_DAC5571=y
CONFIG_TI_DAC7311=y
CONFIG_TI_DAC7612=y
CONFIG_VF610_DAC=y
# end of Digital to analog converters

#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
# end of IIO dummy driver

#
# Filters
#
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=y
CONFIG_ADF4371=y
CONFIG_ADMV1013=y
CONFIG_ADMV4420=y
CONFIG_ADRF6780=y
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADIS16260=y
CONFIG_ADXRS290=y
CONFIG_ADXRS450=y
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_BMG160_SPI=y
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
CONFIG_FXAS21002C_SPI=y
CONFIG_HID_SENSOR_GYRO_3D=y
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
CONFIG_ITG3200=y
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
CONFIG_AFE4404=y
CONFIG_MAX30100=y
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
CONFIG_HDC100X=y
CONFIG_HDC2010=y
CONFIG_HID_SENSOR_HUMIDITY=y
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTS221_SPI=y
CONFIG_HTU21=y
CONFIG_SI7005=y
CONFIG_SI7020=y
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_ADIS16400=y
CONFIG_ADIS16460=y
CONFIG_ADIS16475=y
CONFIG_ADIS16480=y
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
CONFIG_BMI160_SPI=y
CONFIG_FXOS8700=y
CONFIG_FXOS8700_I2C=y
CONFIG_FXOS8700_SPI=y
CONFIG_KMX61=y
CONFIG_INV_ICM42600=y
CONFIG_INV_ICM42600_I2C=y
CONFIG_INV_ICM42600_SPI=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
CONFIG_INV_MPU6050_SPI=y
CONFIG_IIO_ST_LSM6DSX=y
CONFIG_IIO_ST_LSM6DSX_I2C=y
CONFIG_IIO_ST_LSM6DSX_SPI=y
CONFIG_IIO_ST_LSM6DSX_I3C=y
# end of Inertial measurement units

CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y

#
# Light sensors
#
CONFIG_ADJD_S311=y
CONFIG_ADUX1020=y
CONFIG_AL3010=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_AS73211=y
CONFIG_BH1750=y
CONFIG_BH1780=y
CONFIG_CM32181=y
CONFIG_CM3232=y
CONFIG_CM3323=y
CONFIG_CM3605=y
CONFIG_CM36651=y
CONFIG_IIO_CROS_EC_LIGHT_PROX=y
CONFIG_GP2AP002=y
CONFIG_GP2AP020A00F=y
CONFIG_IQS621_ALS=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
CONFIG_HID_SENSOR_ALS=y
CONFIG_HID_SENSOR_PROX=y
CONFIG_JSA1212=y
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=y
CONFIG_LTR501=y
CONFIG_LV0104CS=y
CONFIG_MAX44000=y
CONFIG_MAX44009=y
CONFIG_NOA1305=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
CONFIG_SI1133=y
CONFIG_SI1145=y
CONFIG_STK3310=y
CONFIG_ST_UVIS25=y
CONFIG_ST_UVIS25_I2C=y
CONFIG_ST_UVIS25_SPI=y
CONFIG_TCS3414=y
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL2591=y
CONFIG_TSL2772=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VCNL4035=y
CONFIG_VEML6030=y
CONFIG_VEML6070=y
CONFIG_VL6180=y
CONFIG_ZOPT2201=y
# end of Light sensors

#
# Magnetometer sensors
#
CONFIG_AK8974=y
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_BMC150_MAGN_SPI=y
CONFIG_MAG3110=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_HMC5843_SPI=y
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
CONFIG_SENSORS_RM3100_SPI=y
CONFIG_YAMAHA_YAS530=y
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers

#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=y
CONFIG_HID_SENSOR_DEVICE_ROTATION=y
# end of Inclinometer sensors

CONFIG_IIO_RESCALE_KUNIT_TEST=y
CONFIG_IIO_FORMAT_KUNIT_TEST=y

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
CONFIG_IIO_STM32_TIMER_TRIGGER=y
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone

#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=y
CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE=y
# end of Linear and angular position sensors

#
# Digital potentiometers
#
CONFIG_AD5110=y
CONFIG_AD5272=y
CONFIG_DS1803=y
CONFIG_MAX5432=y
CONFIG_MAX5481=y
CONFIG_MAX5487=y
CONFIG_MCP4018=y
CONFIG_MCP4131=y
CONFIG_MCP4531=y
CONFIG_MCP41010=y
CONFIG_TPL0102=y
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats

#
# Pressure sensors
#
CONFIG_ABP060MG=y
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_BMP280_SPI=y
CONFIG_IIO_CROS_EC_BARO=y
CONFIG_DLHL60D=y
CONFIG_DPS310=y
CONFIG_HID_SENSOR_PRESS=y
CONFIG_HP03=y
CONFIG_ICP10100=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=y
CONFIG_MS5611=y
CONFIG_MS5611_I2C=y
CONFIG_MS5611_SPI=y
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_T5403=y
CONFIG_HP206C=y
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
CONFIG_ZPA2326_SPI=y
# end of Pressure sensors

#
# Lightning sensors
#
CONFIG_AS3935=y
# end of Lightning sensors

#
# Proximity and distance sensors
#
CONFIG_CROS_EC_MKBP_PROXIMITY=y
CONFIG_ISL29501=y
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=y
CONFIG_PING=y
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX_COMMON=y
CONFIG_SX9310=y
CONFIG_SX9324=y
CONFIG_SX9360=y
CONFIG_SX9500=y
CONFIG_SRF08=y
CONFIG_VCNL3020=y
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
CONFIG_AD2S90=y
CONFIG_AD2S1200=y
# end of Resolver to digital converters

#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=y
CONFIG_LTC2983=y
CONFIG_MAXIM_THERMOCOUPLE=y
CONFIG_HID_SENSOR_TEMP=y
CONFIG_MLX90614=y
CONFIG_MLX90632=y
CONFIG_TMP006=y
CONFIG_TMP007=y
CONFIG_TMP117=y
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
CONFIG_MAX31856=y
CONFIG_MAX31865=y
# end of Temperature sensors

CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
CONFIG_PWM_ATMEL=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_ATMEL_TCB=y
CONFIG_PWM_BCM_IPROC=y
CONFIG_PWM_BCM_KONA=y
CONFIG_PWM_BCM2835=y
CONFIG_PWM_BERLIN=y
CONFIG_PWM_BRCMSTB=y
CONFIG_PWM_CLK=y
CONFIG_PWM_CLPS711X=y
CONFIG_PWM_CROS_EC=y
CONFIG_PWM_EP93XX=y
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_HIBVT=y
CONFIG_PWM_IMG=y
CONFIG_PWM_IMX1=y
CONFIG_PWM_IMX27=y
CONFIG_PWM_IMX_TPM=y
CONFIG_PWM_INTEL_LGM=y
CONFIG_PWM_IQS620A=y
CONFIG_PWM_JZ4740=y
CONFIG_PWM_KEEMBAY=y
CONFIG_PWM_LP3943=y
CONFIG_PWM_LPC18XX_SCT=y
CONFIG_PWM_LPC32XX=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PLATFORM=y
CONFIG_PWM_MESON=y
CONFIG_PWM_MTK_DISP=y
CONFIG_PWM_MEDIATEK=y
CONFIG_PWM_MXS=y
CONFIG_PWM_NTXEC=y
CONFIG_PWM_OMAP_DMTIMER=y
CONFIG_PWM_PCA9685=y
CONFIG_PWM_PXA=y
CONFIG_PWM_RASPBERRYPI_POE=y
CONFIG_PWM_RCAR=y
CONFIG_PWM_RENESAS_TPU=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_SIFIVE=y
CONFIG_PWM_SL28CPLD=y
CONFIG_PWM_SPEAR=y
CONFIG_PWM_SPRD=y
CONFIG_PWM_STI=y
CONFIG_PWM_STM32=y
CONFIG_PWM_STM32_LP=y
CONFIG_PWM_STMPE=y
CONFIG_PWM_SUN4I=y
CONFIG_PWM_SUNPLUS=y
CONFIG_PWM_TEGRA=y
CONFIG_PWM_TIECAP=y
CONFIG_PWM_TIEHRPWM=y
CONFIG_PWM_TWL=y
CONFIG_PWM_TWL_LED=y
CONFIG_PWM_VISCONTI=y
CONFIG_PWM_VT8500=y
CONFIG_PWM_XILINX=y

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_MADERA_IRQ=y
CONFIG_JCORE_AIC=y
CONFIG_RENESAS_INTC_IRQPIN=y
CONFIG_RENESAS_IRQC=y
CONFIG_RENESAS_RZA1_IRQC=y
CONFIG_RENESAS_RZG2L_IRQC=y
CONFIG_SL28CPLD_INTC=y
CONFIG_TS4800_IRQ=y
CONFIG_XILINX_INTC=y
CONFIG_INGENIC_TCU_IRQ=y
CONFIG_IRQ_UNIPHIER_AIDET=y
CONFIG_MESON_IRQ_GPIO=y
CONFIG_IMX_IRQSTEER=y
CONFIG_IMX_INTMUX=y
CONFIG_EXYNOS_IRQ_COMBINER=y
CONFIG_MST_IRQ=y
CONFIG_MCHP_EIC=y
CONFIG_SUNPLUS_SP7021_INTC=y
# end of IRQ chip support

CONFIG_IPACK_BUS=y
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_A10SR=y
CONFIG_RESET_ATH79=y
CONFIG_RESET_AXS10X=y
CONFIG_RESET_BCM6345=y
CONFIG_RESET_BERLIN=y
CONFIG_RESET_BRCMSTB=y
CONFIG_RESET_BRCMSTB_RESCAL=y
CONFIG_RESET_HSDK=y
CONFIG_RESET_IMX7=y
CONFIG_RESET_INTEL_GW=y
CONFIG_RESET_K210=y
CONFIG_RESET_LANTIQ=y
CONFIG_RESET_LPC18XX=y
CONFIG_RESET_MCHP_SPARX5=y
CONFIG_RESET_MESON=y
CONFIG_RESET_MESON_AUDIO_ARB=y
CONFIG_RESET_NPCM=y
CONFIG_RESET_PISTACHIO=y
CONFIG_RESET_QCOM_AOSS=y
CONFIG_RESET_QCOM_PDC=y
CONFIG_RESET_RASPBERRYPI=y
CONFIG_RESET_RZG2L_USBPHY_CTRL=y
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SOCFPGA=y
CONFIG_RESET_STARFIVE_JH7100=y
CONFIG_RESET_SUNPLUS=y
CONFIG_RESET_SUNXI=y
CONFIG_RESET_TI_SCI=y
CONFIG_RESET_TI_SYSCON=y
CONFIG_RESET_TI_TPS380X=y
CONFIG_RESET_TN48M_CPLD=y
CONFIG_RESET_UNIPHIER=y
CONFIG_RESET_UNIPHIER_GLUE=y
CONFIG_RESET_ZYNQ=y
CONFIG_COMMON_RESET_HI3660=y
CONFIG_COMMON_RESET_HI6220=y

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_LPC18XX_USB_OTG=y
CONFIG_PHY_PISTACHIO_USB=y
CONFIG_PHY_XGENE=y
CONFIG_USB_LGM_PHY=y
CONFIG_PHY_CAN_TRANSCEIVER=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_SUN6I_MIPI_DPHY=y
CONFIG_PHY_SUN9I_USB=y
CONFIG_PHY_SUN50I_USB3=y
CONFIG_PHY_MESON8_HDMI_TX=y
CONFIG_PHY_MESON8B_USB2=y
CONFIG_PHY_MESON_GXL_USB2=y
CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG=y
CONFIG_PHY_MESON_G12A_USB2=y
CONFIG_PHY_MESON_G12A_USB3_PCIE=y
CONFIG_PHY_MESON_AXG_PCIE=y
CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=y
CONFIG_PHY_MESON_AXG_MIPI_DPHY=y

#
# PHY drivers for Broadcom platforms
#
CONFIG_PHY_BCM63XX_USBH=y
CONFIG_PHY_CYGNUS_PCIE=y
CONFIG_PHY_BCM_SR_USB=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_BCM_NS_USB2=y
CONFIG_PHY_BCM_NS_USB3=y
CONFIG_PHY_NS2_PCIE=y
CONFIG_PHY_NS2_USB_DRD=y
CONFIG_PHY_BRCM_SATA=y
CONFIG_PHY_BRCM_USB=y
CONFIG_PHY_BCM_SR_PCIE=y
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=y
CONFIG_PHY_CADENCE_SIERRA=y
CONFIG_PHY_CADENCE_SALVO=y
CONFIG_PHY_FSL_IMX8MQ_USB=y
CONFIG_PHY_MIXEL_LVDS_PHY=y
CONFIG_PHY_MIXEL_MIPI_DPHY=y
CONFIG_PHY_FSL_IMX8M_PCIE=y
CONFIG_PHY_FSL_LYNX_28G=y
CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_HI3660_USB=y
CONFIG_PHY_HI3670_USB=y
CONFIG_PHY_HI3670_PCIE=y
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
CONFIG_PHY_INGENIC_USB=y
CONFIG_PHY_LANTIQ_VRX200_PCIE=y
CONFIG_PHY_LANTIQ_RCU_USB2=y
CONFIG_ARMADA375_USBCLUSTER_PHY=y
CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_BERLIN_USB=y
CONFIG_PHY_MVEBU_A3700_UTMI=y
CONFIG_PHY_MVEBU_A38X_COMPHY=y
CONFIG_PHY_MVEBU_CP110_UTMI=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_PHY_PXA_USB=y
CONFIG_PHY_MMP3_USB=y
CONFIG_PHY_MMP3_HSIC=y
CONFIG_PHY_MTK_PCIE=y
CONFIG_PHY_MTK_TPHY=y
CONFIG_PHY_MTK_UFS=y
CONFIG_PHY_MTK_XSPHY=y
CONFIG_PHY_MTK_HDMI=y
CONFIG_PHY_MTK_MIPI_DSI=y
CONFIG_PHY_MTK_DP=y
CONFIG_PHY_SPARX5_SERDES=y
CONFIG_PHY_LAN966X_SERDES=y
CONFIG_PHY_CPCAP_USB=y
CONFIG_PHY_MAPPHONE_MDM6600=y
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_ATH79_USB=y
CONFIG_PHY_QCOM_EDP=y
CONFIG_PHY_QCOM_IPQ4019_USB=y
CONFIG_PHY_QCOM_PCIE2=y
CONFIG_PHY_QCOM_QMP=y
CONFIG_PHY_QCOM_QUSB2=y
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
CONFIG_PHY_QCOM_USB_HSIC=y
CONFIG_PHY_QCOM_USB_HS_28NM=y
CONFIG_PHY_QCOM_USB_SS=y
CONFIG_PHY_QCOM_IPQ806X_USB=y
CONFIG_PHY_MT7621_PCI=y
CONFIG_PHY_RALINK_USB=y
CONFIG_PHY_RCAR_GEN3_USB3=y
CONFIG_PHY_ROCKCHIP_DPHY_RX0=y
CONFIG_PHY_ROCKCHIP_INNO_HDMI=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY=y
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=y
CONFIG_PHY_ROCKCHIP_PCIE=y
CONFIG_PHY_ROCKCHIP_TYPEC=y
CONFIG_PHY_EXYNOS_DP_VIDEO=y
CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
CONFIG_PHY_EXYNOS_PCIE=y
CONFIG_PHY_SAMSUNG_UFS=y
CONFIG_PHY_SAMSUNG_USB2=y
CONFIG_PHY_S5PV210_USB2=y
CONFIG_PHY_EXYNOS5_USBDRD=y
CONFIG_PHY_UNIPHIER_USB2=y
CONFIG_PHY_UNIPHIER_USB3=y
CONFIG_PHY_UNIPHIER_PCIE=y
CONFIG_PHY_UNIPHIER_AHCI=y
CONFIG_PHY_ST_SPEAR1310_MIPHY=y
CONFIG_PHY_ST_SPEAR1340_MIPHY=y
CONFIG_PHY_STIH407_USB=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PHY_TEGRA194_P2U=y
CONFIG_PHY_DA8XX_USB=y
CONFIG_PHY_DM816X_USB=y
CONFIG_PHY_AM654_SERDES=y
CONFIG_PHY_J721E_WIZ=y
CONFIG_OMAP_CONTROL_PHY=y
CONFIG_TI_PIPE3=y
CONFIG_PHY_TUSB1210=y
CONFIG_PHY_INTEL_KEEMBAY_EMMC=y
CONFIG_PHY_INTEL_KEEMBAY_USB=y
CONFIG_PHY_INTEL_LGM_COMBO=y
CONFIG_PHY_INTEL_LGM_EMMC=y
CONFIG_PHY_INTEL_THUNDERBAY_EMMC=y
CONFIG_PHY_XILINX_ZYNQMP=y
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_DTPM=y
CONFIG_MCB=y
CONFIG_MCB_LPC=y
CONFIG_RAS=y

#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
CONFIG_ANDROID_BINDER_IPC_SELFTEST=y
# end of Android

CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_IMX_IIM=y
CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_JZ4780_EFUSE=y
CONFIG_NVMEM_LPC18XX_EEPROM=y
CONFIG_NVMEM_LPC18XX_OTP=y
CONFIG_NVMEM_MXS_OCOTP=y
CONFIG_MTK_EFUSE=y
CONFIG_MICROCHIP_OTPC=y
CONFIG_NVMEM_NINTENDO_OTP=y
CONFIG_QCOM_QFPROM=y
CONFIG_NVMEM_SPMI_SDAM=y
CONFIG_ROCKCHIP_EFUSE=y
CONFIG_ROCKCHIP_OTP=y
CONFIG_NVMEM_BCM_OCOTP=y
CONFIG_NVMEM_STM32_ROMEM=y
CONFIG_UNIPHIER_EFUSE=y
CONFIG_NVMEM_VF610_OCOTP=y
CONFIG_MESON_MX_EFUSE=y
CONFIG_NVMEM_SNVS_LPGPR=y
CONFIG_RAVE_SP_EEPROM=y
CONFIG_SC27XX_EFUSE=y
CONFIG_SPRD_EFUSE=y
CONFIG_NVMEM_RMEM=y
CONFIG_NVMEM_BRCM_NVRAM=y
CONFIG_NVMEM_LAYERSCAPE_SFP=y
CONFIG_NVMEM_SUNPLUS_OCOTP=y
CONFIG_NVMEM_APPLE_EFUSES=y

#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
CONFIG_STM_PROTO_SYS_T=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_STH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support

CONFIG_FPGA=y
CONFIG_FPGA_MGR_SOCFPGA=y
CONFIG_FPGA_MGR_SOCFPGA_A10=y
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_ALTERA_PR_IP_CORE_PLAT=y
CONFIG_FPGA_MGR_ALTERA_PS_SPI=y
CONFIG_FPGA_MGR_ZYNQ_FPGA=y
CONFIG_FPGA_MGR_XILINX_SPI=y
CONFIG_FPGA_MGR_ICE40_SPI=y
CONFIG_FPGA_MGR_MACHXO2_SPI=y
CONFIG_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
CONFIG_XILINX_PR_DECOUPLER=y
CONFIG_FPGA_REGION=y
CONFIG_OF_FPGA_REGION=y
CONFIG_FPGA_DFL=y
CONFIG_FPGA_DFL_AFU=y
CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=y
CONFIG_FPGA_MGR_ZYNQMP_FPGA=y
CONFIG_FPGA_MGR_VERSAL_FPGA=y
CONFIG_FPGA_M10_BMC_SEC_UPDATE=y
CONFIG_FPGA_MGR_MICROCHIP_SPI=y
CONFIG_FSI=y
CONFIG_FSI_NEW_DEV_NODE=y
CONFIG_FSI_MASTER_GPIO=y
CONFIG_FSI_MASTER_HUB=y
CONFIG_FSI_MASTER_AST_CF=y
CONFIG_FSI_MASTER_ASPEED=y
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=y
CONFIG_FSI_OCC=y
CONFIG_TEE=y
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_ADGS1408=y
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_IMX=y
CONFIG_INTERCONNECT_IMX8MM=y
CONFIG_INTERCONNECT_IMX8MN=y
CONFIG_INTERCONNECT_IMX8MQ=y
CONFIG_INTERCONNECT_IMX8MP=y
CONFIG_INTERCONNECT_QCOM_OSM_L3=y
CONFIG_INTERCONNECT_SAMSUNG=y
CONFIG_INTERCONNECT_EXYNOS=y
CONFIG_COUNTER=y
CONFIG_104_QUAD_8=y
CONFIG_INTERRUPT_CNT=y
CONFIG_STM32_TIMER_CNT=y
CONFIG_STM32_LPTIMER_CNT=y
CONFIG_TI_EQEP=y
CONFIG_FTM_QUADDEC=y
CONFIG_MICROCHIP_TCB_CAPTURE=y
CONFIG_MOST=y
CONFIG_MOST_USB_HDM=y
CONFIG_MOST_CDEV=y
CONFIG_MOST_SND=y
CONFIG_PECI=y
CONFIG_PECI_CPU=y
CONFIG_PECI_ASPEED=y
CONFIG_HTE=y
# end of Device Drivers

#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_EXT4_KUNIT_TESTS=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZORLE=y
CONFIG_F2FS_FS_LZ4=y
CONFIG_F2FS_FS_LZ4HC=y
CONFIG_F2FS_FS_ZSTD=y
CONFIG_F2FS_IOSTAT=y
CONFIG_F2FS_UNFAIR_RWSEM=y
CONFIG_ZONEFS_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
CONFIG_FS_VERITY=y
CONFIG_FS_VERITY_DEBUG=y
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_VIRTIO_FS=y
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_METACOPY=y

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=y
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_ERROR_INJECTION=y
CONFIG_CACHEFILES_ONDEMAND=y
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_FAT_KUNIT_TEST=y
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
CONFIG_NTFS3_FS=y
CONFIG_NTFS3_LZX_XPRESS=y
CONFIG_NTFS3_FS_POSIX_ACL=y
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
CONFIG_UBIFS_FS_AUTHENTICATION=y
CONFIG_CRAMFS=y
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_CRAMFS_MTD=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=y
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
CONFIG_PSTORE_RAM=y
CONFIG_PSTORE_ZONE=y
CONFIG_PSTORE_BLK=y
CONFIG_PSTORE_BLK_BLKDEV=""
CONFIG_PSTORE_BLK_KMSG_SIZE=64
CONFIG_PSTORE_BLK_MAX_REASON=2
CONFIG_PSTORE_BLK_PMSG_SIZE=64
CONFIG_PSTORE_BLK_CONSOLE_SIZE=64
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_EROFS_FS=y
CONFIG_EROFS_FS_DEBUG=y
CONFIG_EROFS_FS_XATTR=y
CONFIG_EROFS_FS_POSIX_ACL=y
CONFIG_EROFS_FS_SECURITY=y
CONFIG_EROFS_FS_ZIP=y
CONFIG_EROFS_FS_ZIP_LZMA=y
CONFIG_EROFS_FS_ONDEMAND=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_PNFS_BLOCK=y
CONFIG_PNFS_FLEXFILE_LAYOUT=y
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFS_V4_2_READ_PLUS=y
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_NFSD_V4_2_INTER_SSC=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=y
CONFIG_CEPH_FS=y
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CEPH_FS_SECURITY_LABEL=y
CONFIG_CIFS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_DEBUG_DUMP_KEYS=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
CONFIG_CIFS_SMB_DIRECT=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_ROOT=y
CONFIG_SMB_SERVER=y
CONFIG_SMB_SERVER_SMBDIRECT=y
CONFIG_SMB_SERVER_CHECK_CAP_NET_ADMIN=y
CONFIG_SMB_SERVER_KERBEROS5=y
CONFIG_SMBFS_COMMON=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
CONFIG_AFS_DEBUG=y
CONFIG_AFS_FSCACHE=y
CONFIG_AFS_DEBUG_CURSOR=y
CONFIG_9P_FS=y
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEPRECATED_API=y
CONFIG_DLM_DEBUG=y
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_SELFTEST=y
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_TRUSTED_KEYS_TEE=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_USER_DECRYPTED_DATA=y
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_INFINIBAND=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_SMACK_BRINGUP=y
CONFIG_SECURITY_SMACK_NETFILTER=y
CONFIG_SECURITY_SMACK_APPEND_SIGNALS=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_DEBUG=y
CONFIG_SECURITY_APPARMOR_DEBUG_ASSERTS=y
CONFIG_SECURITY_APPARMOR_DEBUG_MESSAGES=y
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
CONFIG_SECURITY_APPARMOR_KUNIT_TEST=y
CONFIG_SECURITY_LOADPIN=y
CONFIG_SECURITY_LOADPIN_ENFORCE=y
CONFIG_SECURITY_LOADPIN_VERITY=y
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_SAFESETID=y
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
CONFIG_SECURITY_LANDLOCK=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_PLATFORM_KEYRING=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
# CONFIG_IMA_DEFAULT_HASH_SM3 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_ARCH_POLICY=y
CONFIG_IMA_APPRAISE_BUILD_POLICY=y
CONFIG_IMA_APPRAISE_REQUIRE_FIRMWARE_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_KEXEC_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_MODULE_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_POLICY_SIGS=y
CONFIG_IMA_APPRAISE_BOOTPARAM=y
CONFIG_IMA_APPRAISE_MODSIG=y
CONFIG_IMA_TRUSTED_KEYRING=y
CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY=y
CONFIG_IMA_BLACKLIST_KEYRING=y
CONFIG_IMA_LOAD_X509=y
CONFIG_IMA_X509_PATH="/etc/keys/x509_ima.der"
CONFIG_IMA_APPRAISE_SIGNED_INIT=y
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_DISABLE_HTABLE=y
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_EVM_EXTRA_SMACK_XATTRS=y
CONFIG_EVM_ADD_XATTRS=y
CONFIG_EVM_LOAD_X509=y
CONFIG_EVM_X509_PATH="/etc/keys/x509_evm.der"
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
CONFIG_ZERO_CALL_USED_REGS=y
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
CONFIG_CRYPTO_ENGINE=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XCTR=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_HCTR2=y
CONFIG_CRYPTO_ESSIV=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLYVAL=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_ARIA=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SM4_GENERIC=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_RNG_CAVP=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
CONFIG_CRYPTO_STATS=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_ALLWINNER=y
CONFIG_CRYPTO_DEV_EXYNOS_RNG=y
CONFIG_CRYPTO_DEV_S5P=y
CONFIG_CRYPTO_DEV_ATMEL_AUTHENC=y
CONFIG_CRYPTO_DEV_ATMEL_AES=y
CONFIG_CRYPTO_DEV_ATMEL_TDES=y
CONFIG_CRYPTO_DEV_ATMEL_SHA=y
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=y
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=y
CONFIG_CRYPTO_DEV_QCE=y
CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
CONFIG_CRYPTO_DEV_QCE_SHA=y
CONFIG_CRYPTO_DEV_QCE_AEAD=y
CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
CONFIG_CRYPTO_DEV_QCOM_RNG=y
CONFIG_CRYPTO_DEV_IMGTEC_HASH=y
CONFIG_CRYPTO_DEV_ZYNQMP_AES=y
CONFIG_CRYPTO_DEV_ZYNQMP_SHA3=y
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_CRYPTO_DEV_SAFEXCEL=y
CONFIG_CRYPTO_DEV_CCREE=y
CONFIG_CRYPTO_DEV_HISI_SEC=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y
CONFIG_CRYPTO_DEV_SA2UL=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU_HMAC_SHA224=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
CONFIG_FIPS_SIGNATURE_SELFTEST=y

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_STMP_DEVICE=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_LRU_CACHE=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_6x10=y
CONFIG_FONT_10x18=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_TER16x32=y
CONFIG_FONT_6x8=y
CONFIG_SG_SPLIT=y
CONFIG_SG_POOL=y
CONFIG_SBITMAP=y
CONFIG_PARMAN=y
CONFIG_OBJAGG=y
# end of Library routines

CONFIG_ASN1_ENCODER=y
CONFIG_POLYNOMIAL=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
CONFIG_STACKTRACE_BUILD_ID=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_FRAME_POINTER=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
CONFIG_UBSAN_DIV_ZERO=y
CONFIG_UBSAN_UNREACHABLE=y
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
CONFIG_TEST_UBSAN=m
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
CONFIG_DEBUG_NET=y
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_DEBUG_ON=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SHRINKER_DEBUG=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_VMACACHE=y
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_WQ_WATCHDOG=y
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_DEBUG_IRQFLAGS=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_KOBJECT_RELEASE=y
CONFIG_HAVE_DEBUG_BUGVERBOSE=y

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_REF_SCALE_TEST=y
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_TRACE_CLOCK=y
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set

#
# m68k Debugging
#
CONFIG_BOOTPARAM=y
CONFIG_BOOTPARAM_STRING="console=ttyS0,19200"
CONFIG_EARLY_PRINTK=y
# end of m68k Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=y
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAULT_INJECTION_USERCOPY=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAIL_SUNRPC=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_CPUMASK_KUNIT_TEST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_MIN_HEAP=y
CONFIG_TEST_SORT=y
CONFIG_TEST_DIV64=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_RBTREE_TEST=y
CONFIG_REED_SOLOMON_TEST=y
CONFIG_INTERVAL_TREE_TEST=y
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=y
CONFIG_TEST_HEXDUMP=y
CONFIG_STRING_SELFTEST=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_STRSCPY=y
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
CONFIG_TEST_SCANF=y
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
CONFIG_TEST_XARRAY=y
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_SIPHASH=y
CONFIG_TEST_IDA=y
CONFIG_TEST_PARMAN=y
CONFIG_TEST_LKM=m
CONFIG_TEST_BITOPS=m
CONFIG_TEST_VMALLOC=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_BLACKHOLE_DEV=m
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=y
CONFIG_TEST_SYSCTL=y
CONFIG_BITFIELD_KUNIT=y
CONFIG_HASH_KUNIT_TEST=y
CONFIG_RESOURCE_KUNIT_TEST=y
CONFIG_SYSCTL_KUNIT_TEST=y
CONFIG_LIST_KUNIT_TEST=y
CONFIG_LINEAR_RANGES_TEST=y
CONFIG_CMDLINE_KUNIT_TEST=y
CONFIG_BITS_TEST=y
CONFIG_SLUB_KUNIT_TEST=y
CONFIG_RATIONAL_KUNIT_TEST=y
CONFIG_MEMCPY_KUNIT_TEST=y
CONFIG_OVERFLOW_KUNIT_TEST=y
CONFIG_STACKINIT_KUNIT_TEST=y
CONFIG_TEST_UDELAY=y
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
CONFIG_TEST_MEMCAT_P=y
CONFIG_TEST_OBJAGG=y
CONFIG_TEST_MEMINIT=y
CONFIG_TEST_FREE_PAGES=y
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage

CONFIG_WARN_MISSING_DOCUMENTS=y
CONFIG_WARN_ABI_ERRORS=y
# end of Kernel hacking

Re: [PATCH 03/26] fuse-bpf: Update uapi for fuse-bpf

[Miklos Szeredi]

On Tue, 27 Sept 2022 at 01:18, Daniel Rosenberg <drosen@google.com> wrote:

> diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h
> index d6ccee961891..8c80c146e69b 100644
> --- a/include/uapi/linux/fuse.h
> +++ b/include/uapi/linux/fuse.h
> @@ -572,6 +572,17 @@ struct fuse_entry_out {
>         struct fuse_attr attr;
>  };
>
> +#define FUSE_ACTION_KEEP       0
> +#define FUSE_ACTION_REMOVE     1
> +#define FUSE_ACTION_REPLACE    2
> +
> +struct fuse_entry_bpf_out {
> +       uint64_t        backing_action;
> +       uint64_t        backing_fd;

This is a security issue.   See this post from Jann:

https://lore.kernel.org/all/CAG48ez17uXtjCTa7xpa=JWz3iBbNDQTKO2hvn6PAZtfW3kXgcA@mail.gmail.com/

The fuse-passthrough series solved this by pre-registering the
passthrogh fd with an ioctl. Since this requires an expicit syscall on
the server side the attack is thwarted.

It would be nice if this mechanism was agreed between these projects.

BTW, does fuse-bpf provide a superset of fuse-passthrough?  I mean
could fuse-bpf work with a NULL bpf program as a simple passthrough?

Thanks,
Miklos

Re: [PATCH 12/26] fuse-bpf: Add support for fallocate

[Dave Chinner]

On Mon, Sep 26, 2022 at 04:18:08PM -0700, Daniel Rosenberg wrote:
> Signed-off-by: Daniel Rosenberg <drosen@google.com>
> Signed-off-by: Paul Lawrence <paullawrence@google.com>
> ---
>  fs/fuse/backing.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
>  fs/fuse/file.c    | 10 ++++++++++
>  fs/fuse/fuse_i.h  | 11 +++++++++++
>  3 files changed, 69 insertions(+)
> 
> diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
> index 97e92c633cfd..95c60d6d7597 100644
> --- a/fs/fuse/backing.c
> +++ b/fs/fuse/backing.c
> @@ -188,6 +188,54 @@ ssize_t fuse_backing_mmap(struct file *file, struct vm_area_struct *vma)
>  	return ret;
>  }
>  
> +int fuse_file_fallocate_initialize_in(struct bpf_fuse_args *fa,
> +				      struct fuse_fallocate_in *ffi,
> +				      struct file *file, int mode, loff_t offset, loff_t length)
> +{
> +	struct fuse_file *ff = file->private_data;
> +
> +	*ffi = (struct fuse_fallocate_in) {
> +		.fh = ff->fh,
> +		.offset = offset,
> +		.length = length,
> +		.mode = mode,
> +	};
> +
> +	*fa = (struct bpf_fuse_args) {
> +		.opcode = FUSE_FALLOCATE,
> +		.nodeid = ff->nodeid,
> +		.in_numargs = 1,
> +		.in_args[0].size = sizeof(*ffi),
> +		.in_args[0].value = ffi,
> +	};
> +
> +	return 0;
> +}
> +
> +int fuse_file_fallocate_initialize_out(struct bpf_fuse_args *fa,
> +				       struct fuse_fallocate_in *ffi,
> +				       struct file *file, int mode, loff_t offset, loff_t length)
> +{
> +	return 0;
> +}
> +
> +int fuse_file_fallocate_backing(struct bpf_fuse_args *fa, int *out,
> +				struct file *file, int mode, loff_t offset, loff_t length)
> +{
> +	const struct fuse_fallocate_in *ffi = fa->in_args[0].value;
> +	struct fuse_file *ff = file->private_data;
> +
> +	*out = vfs_fallocate(ff->backing_file, ffi->mode, ffi->offset,
> +			     ffi->length);
> +	return 0;
> +}
> +
> +int fuse_file_fallocate_finalize(struct bpf_fuse_args *fa, int *out,
> +				 struct file *file, int mode, loff_t offset, loff_t length)
> +{
> +	return 0;
> +}
> +
>  /*******************************************************************************
>   * Directory operations after here                                             *
>   ******************************************************************************/
> diff --git a/fs/fuse/file.c b/fs/fuse/file.c
> index dd4485261cc7..ef6f6b0b3b59 100644
> --- a/fs/fuse/file.c
> +++ b/fs/fuse/file.c
> @@ -3002,6 +3002,16 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset,
>  
>  	bool block_faults = FUSE_IS_DAX(inode) && lock_inode;
>  
> +#ifdef CONFIG_FUSE_BPF
> +	if (fuse_bpf_backing(inode, struct fuse_fallocate_in, err,
> +			       fuse_file_fallocate_initialize_in,
> +			       fuse_file_fallocate_initialize_out,
> +			       fuse_file_fallocate_backing,
> +			       fuse_file_fallocate_finalize,
> +			       file, mode, offset, length))
> +		return err;
> +#endif

As I browse through this series, I find this pattern unnecessarily
verbose and it exposes way too much of the filtering mechanism to
code that should not have to know anything about it.

Wouldn't it be better to code this as:

	error = fuse_filter_fallocate(file, mode, offset, length);
	if (error < 0)
		return error;


And then make this fuse_bpf_backing() call and all the indirect
functions it uses internal (i.e. static) in fs/fuse/backing.c?

That way the interface in fs/fuse/fuse_i.h can be much cleaner and
handle the #ifdef CONFIG_FUSE_BPF directly by:

#ifdef CONFIG_FUSE_BPF
....
int fuse_filter_fallocate(file, mode, offset, length);
....
#else /* !CONFIG_FUSE_BPF */
....
static inline fuse_filter_fallocate(file, mode, offset, length)
{
	return 0;
}
....
#endif /* CONFIG_FUSE_BPF */

This seems much cleaner to me than exposing fuse_bpf_backing()
boiler plate all over the code...

Cheers,

Dave.
-- 
Dave Chinner
david@fromorbit.com

Re: [PATCH 08/26] fuse: Add fuse-bpf, a stacked fs extension for FUSE

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 1226 bytes --]

Hi Daniel,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on bf682942cd26ce9cd5e87f73ae099b383041e782]

url:    https://github.com/intel-lab-lkp/linux/commits/Daniel-Rosenberg/FUSE-BPF-A-Stacked-Filesystem-Extension-for-FUSE/20220927-095052
base:   bf682942cd26ce9cd5e87f73ae099b383041e782
config: x86_64-rhel-8.3-func
compiler: gcc-11 (Debian 11.3.0-5) 11.3.0
reproduce (this is a W=1 build):
        # https://github.com/intel-lab-lkp/linux/commit/6e7c858791178a83dde45170982c6cce3f625fc3
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Daniel-Rosenberg/FUSE-BPF-A-Stacked-Filesystem-Extension-for-FUSE/20220927-095052
        git checkout 6e7c858791178a83dde45170982c6cce3f625fc3
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>, old ones prefixed by <<):

>> ERROR: modpost: "parse_fuse_entry_bpf" [fs/fuse/fuse.ko] undefined!

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 167500 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 6.0.0-rc6 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-11 (Debian 11.3.0-5) 11.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23890
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23890
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING_USER=y
# CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_DEFAULT_ON=y
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_DYNAMIC is not set
# CONFIG_SCHED_CORE is not set

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
# CONFIG_FORCE_TASKS_RUDE_RCU is not set
CONFIG_TASKS_RUDE_RCU=y
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
# CONFIG_TASKS_TRACE_RCU_READ_MB is not set
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=1024
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_X86_CPU_RESCTRL is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
CONFIG_INTEL_TDX_GUEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_BOOT_VESA_SUPPORT=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_PERF_EVENTS_AMD_UNCORE is not set
# CONFIG_PERF_EVENTS_AMD_BRS is not set
# end of Performance monitoring

CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_LATE_LOADING=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_X86_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
# CONFIG_X86_KERNEL_IBT is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
# CONFIG_X86_INTEL_TSX_MODE_OFF is not set
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
CONFIG_X86_INTEL_TSX_MODE_AUTO=y
# CONFIG_X86_SGX is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
# end of Processor type and features

CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_SPECULATION_MITIGATIONS=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_RETPOLINE=y
CONFIG_RETHUNK=y
CONFIG_CPU_UNRET_ENTRY=y
CONFIG_CPU_IBPB_ENTRY=y
CONFIG_CPU_IBRS_ENTRY=y
# CONFIG_SLS is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_PLATFORM_PROFILE=m
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_DPTF is not set
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not set
CONFIG_ACPI_PCC=y
CONFIG_PMIC_OPREGION=y
CONFIG_ACPI_PRMT=y
CONFIG_X86_PM_TIMER=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_AMD_PSTATE is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle

CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32_ABI is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations

CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_XEN is not set
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_KRETPROBE_ON_RETHOOK=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_HAS_CC_PLATFORM=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=m
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
CONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_DEVICE_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_THP_SWAP=y
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
# CONFIG_CMA_SYSFS is not set
CONFIG_CMA_AREAS=19
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ZONE_DEVICE=y
CONFIG_HMM_MIRROR=y
CONFIG_GET_FREE_REGION=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_VMAP_PFN=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
# CONFIG_USERFAULTFD is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_USER_COMPAT is not set
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_SMC is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
CONFIG_NETLABEL=y
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
# CONFIG_NFT_TUNNEL is not set
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
# CONFIG_NFT_XFRM is not set
CONFIG_NFT_SOCKET=m
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
# CONFIG_NFT_REJECT_NETDEV is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
# CONFIG_IP_VS_TWOS is not set

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
CONFIG_NFT_BRIDGE_REJECT=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
# CONFIG_TIPC_MEDIA_IB is not set
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
# CONFIG_6LOWPAN_NHC is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
# CONFIG_NET_ACT_IPT is not set
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not set
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
CONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=m
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=y
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_RDMA is not set
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
CONFIG_PSAMPLE=m
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_EDR is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#
CONFIG_VMD=y

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPI=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_DXE_MEM_ATTRIBUTES=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
# CONFIG_EFI_COCO_SECRET is not set
# end of EFI (Extensible Firmware Interface) Support

CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_ZRAM=m
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_LZO is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
CONFIG_ZRAM_WRITEBACK=y
# CONFIG_ZRAM_MEMORY_TRACKING is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=m
# CONFIG_NVME_RDMA is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_PASSTHRU is not set
CONFIG_NVME_TARGET_LOOP=m
# CONFIG_NVME_TARGET_RDMA is not set
CONFIG_NVME_TARGET_FC=m
# CONFIG_NVME_TARGET_TCP is not set
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_GSC is not set
# CONFIG_INTEL_MEI_HDCP is not set
# CONFIG_INTEL_MEI_PXP is not set
CONFIG_VMWARE_VMCI=m
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=m
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
CONFIG_PVPANIC=y
# CONFIG_PVPANIC_MMIO is not set
# CONFIG_PVPANIC_PCI is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_EFCT is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
# CONFIG_DM_EBS is not set
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
# CONFIG_DM_ZONED is not set
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=m
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_NET_VRF is not set
# CONFIG_VSOCKMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_IXGBE_DCB is not set
# CONFIG_IXGBE_IPSEC is not set
# CONFIG_IXGBEVF is not set
CONFIG_I40E=y
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
CONFIG_IGC=y
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_TXGBE is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_OCTEON_EP is not set
# CONFIG_PRESTERA is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_SFC_SIENA is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
CONFIG_FIXED_PHY=y

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AX88796B_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_CAN_DEV=m
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_CAN327 is not set
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_CTUCANFD_PCI is not set
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not set
# CONFIG_CAN_SJA1000_PLATFORM is not set
CONFIG_CAN_SOFTING=m

#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# CONFIG_CAN_MCP251XFD is not set
# end of CAN SPI interfaces

#
# CAN USB interfaces
#
# CONFIG_CAN_8DEV_USB is not set
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB is not set
# CONFIG_CAN_ETAS_ES58X is not set
# CONFIG_CAN_GS_USB is not set
# CONFIG_CAN_KVASER_USB is not set
# CONFIG_CAN_MCBA_USB is not set
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces

# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_THUNDER is not set

#
# MDIO Multiplexers
#

#
# PCS device drivers
#
# end of PCS device drivers

# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_RTL8152=y
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
# CONFIG_ATH11K is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
CONFIG_WLAN_VENDOR_PURELIFI=y
# CONFIG_PLFXLC is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
# CONFIG_RTW89 is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_SILABS=y
# CONFIG_WFX is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
# CONFIG_RMI4_F3A is not set
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=64
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_AMDPSP is not set
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_MICROCHIP_CORE is not set
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not set
CONFIG_PTP_1588_CLOCK_KVM=m
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_VMW is not set
# end of PTP clock support

CONFIG_PINCTRL=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set

#
# Intel pinctrl drivers
#
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not set
# CONFIG_PINCTRL_ALDERLAKE is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_ELKHARTLAKE is not set
# CONFIG_PINCTRL_EMMITSBURG is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LAKEFIELD is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_METEORLAKE is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
# CONFIG_PINCTRL_TIGERLAKE is not set
# end of Intel pinctrl drivers

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

# CONFIG_W1 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_DELL_SMM is not set
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1266 is not set
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
# CONFIG_SENSORS_FSP_3Y is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_DPS920AB is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LT7182S is not set
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
# CONFIG_SENSORS_MAX15301 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2888 is not set
# CONFIG_SENSORS_MP2975 is not set
# CONFIG_SENSORS_MP5023 is not set
# CONFIG_SENSORS_PIM4328 is not set
# CONFIG_SENSORS_PLI1209BC is not set
# CONFIG_SENSORS_PM6764TR is not set
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_Q54SJ108A2 is not set
# CONFIG_SENSORS_STPDDC60 is not set
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE152 is not set
# CONFIG_SENSORS_XDPE122 is not set
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SY7636A is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
# CONFIG_SENSORS_ASUS_WMI is not set
# CONFIG_SENSORS_ASUS_WMI_EC is not set
# CONFIG_SENSORS_ASUS_EC is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers

CONFIG_INTEL_PCH_THERMAL=m
# CONFIG_INTEL_TCC_COOLING is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_INTEL_HFI_THERMAL is not set
# end of Intel thermal drivers

CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_MLX_WDT is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not set
CONFIG_F71808E_WDT=m
# CONFIG_SP5100_TCO is not set
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SIMPLE_MFD_I2C is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=m
CONFIG_LIRC=y
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_IR_SANYO_DECODER=m
# CONFIG_IR_SHARP_DECODER is not set
CONFIG_IR_SONY_DECODER=m
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=m
CONFIG_IR_FINTEK=m
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_IMON_RAW is not set
CONFIG_IR_ITE_CIR=m
# CONFIG_IR_MCEUSB is not set
CONFIG_IR_NUVOTON=m
# CONFIG_IR_REDRAT3 is not set
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_TOY is not set
# CONFIG_IR_TTUSBIR is not set
CONFIG_IR_WINBOND_CIR=m
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_RC_XBOX_DVD is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
# CONFIG_MEDIA_TEST_SUPPORT is not set
# end of Media device types

#
# Media drivers
#

#
# Drivers filtered as selected at 'Filter media drivers'
#

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# end of Media drivers

CONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV=y

#
# Media ancillary drivers
#
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
# CONFIG_AGP is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_BUDDY=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT_KVMGT is not set
CONFIG_DRM_I915_REQUEST_TIMEOUT=20000
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_GMA500=m
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=m
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_QXL=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_BOCHS=m
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_PANEL_MIPI_DBI is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_PRIVACY_SCREEN=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support

CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
CONFIG_HID_CMEDIA=m
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_FT260 is not set
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
# CONFIG_HID_LETSKETCH is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NINTENDO is not set
CONFIG_HID_NTI=m
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
# CONFIG_HID_RAZER is not set
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support

#
# I2C HID support
#
# CONFIG_I2C_HID_ACPI is not set
# end of I2C HID support

#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
# end of Intel ISH HID support

#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ATM is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not set
CONFIG_TYPEC_UCSI=y
# CONFIG_UCSI_CCG is not set
CONFIG_UCSI_ACPI=y
# CONFIG_UCSI_STM32G0 is not set
# CONFIG_TYPEC_TPS6598X is not set
# CONFIG_TYPEC_RT1719 is not set
# CONFIG_TYPEC_STUSB160X is not set
# CONFIG_TYPEC_WUSB3801 is not set

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_FSA4480 is not set
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers

# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_APU is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_MLXCPLD=m
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
# CONFIG_INFINIBAND_EFA is not set
# CONFIG_INFINIBAND_ERDMA is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_USNIC is not set
# CONFIG_INFINIBAND_RDMAVT is not set
CONFIG_RDMA_RXE=m
CONFIG_RDMA_SIW=m
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_INFINIBAND_ISERT is not set
# CONFIG_INFINIBAND_RTRS_CLIENT is not set
# CONFIG_INFINIBAND_RTRS_SERVER is not set
# CONFIG_INFINIBAND_OPA_VNIC is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_GHES=y
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
# CONFIG_EDAC_I10NM is not set
CONFIG_EDAC_PND2=m
# CONFIG_EDAC_IGEN6 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set
# CONFIG_RTC_DRV_RX6110 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_INTEL_IDMA64=m
# CONFIG_INTEL_IDXD is not set
# CONFIG_INTEL_IDXD_COMPAT is not set
CONFIG_INTEL_IOATDMA=m
# CONFIG_PLX_DMA is not set
# CONFIG_AMD_PTDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_HSU_DMA=y
# CONFIG_SF_PDMA is not set
# CONFIG_INTEL_LDMA is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options

CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI_CORE=m
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
# CONFIG_VFIO_PCI_IGD is not set
CONFIG_VFIO_MDEV=m
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_MEM is not set
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_VSOCK=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=m
# CONFIG_MLXREG_IO is not set
# CONFIG_MLXREG_LC is not set
# CONFIG_NVSW_SN2201 is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE3_WMI is not set
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
# CONFIG_HUAWEI_WMI is not set
# CONFIG_UV_SYSFS is not set
CONFIG_MXM_WMI=m
# CONFIG_PEAQ_WMI is not set
# CONFIG_NVIDIA_WMI_EC_BACKLIGHT is not set
# CONFIG_XIAOMI_WMI is not set
# CONFIG_GIGABYTE_WMI is not set
# CONFIG_YOGABOOK_WMI is not set
CONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not set
CONFIG_ACER_WMI=m
# CONFIG_AMD_PMC is not set
# CONFIG_AMD_HSMP is not set
# CONFIG_ADV_SWBUTTON is not set
CONFIG_APPLE_GMUX=m
CONFIG_ASUS_LAPTOP=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
# CONFIG_ASUS_TF103C_DOCK is not set
# CONFIG_MERAKI_MX100 is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_EEEPC_WMI=m
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not set
CONFIG_AMILO_RFKILL=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
# CONFIG_GPD_POCKET_FAN is not set
CONFIG_HP_ACCEL=m
# CONFIG_WIRELESS_HOTKEY is not set
CONFIG_HP_WMI=m
# CONFIG_IBM_RTL is not set
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_SENSORS_HDAPS=m
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_THINKPAD_LMI is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_INTEL_SAR_INT1092 is not set
CONFIG_INTEL_PMC_CORE=m

#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support

CONFIG_INTEL_WMI=y
# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
CONFIG_INTEL_WMI_THUNDERBOLT=m

#
# Intel Uncore Frequency Control
#
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# end of Intel Uncore Frequency Control

CONFIG_INTEL_HID_EVENT=m
CONFIG_INTEL_VBTN=m
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_OAKTRAIL=m
# CONFIG_INTEL_ISHTP_ECLITE is not set
# CONFIG_INTEL_PUNIT_IPC is not set
CONFIG_INTEL_RST=m
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_INTEL_TURBO_MAX_3=y
# CONFIG_INTEL_VSEC is not set
CONFIG_MSI_LAPTOP=m
CONFIG_MSI_WMI=m
# CONFIG_PCENGINES_APU2 is not set
# CONFIG_BARCO_P50_GPIO is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_SAMSUNG_Q10=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
CONFIG_COMPAL_LAPTOP=m
# CONFIG_LG_LAPTOP is not set
CONFIG_PANASONIC_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
# CONFIG_SYSTEM76_ACPI is not set
CONFIG_TOPSTAR_LAPTOP=m
# CONFIG_SERIAL_MULTI_INSTANTIATE is not set
CONFIG_MLX_PLATFORM=m
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not set
# CONFIG_SIEMENS_SIMATIC_IPC is not set
# CONFIG_WINMATE_FM07_KEYS is not set
CONFIG_P2SB=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_XILINX_VCU is not set
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_IOMMU_SVA=y
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y
CONFIG_IRQ_REMAP=y
# CONFIG_VIRTIO_IOMMU is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_EPF is not set
# CONFIG_NTB_SWITCHTEC is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_DWC is not set
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set

#
# IRQ chip support
#
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
# CONFIG_IDLE_INJECT is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_DEV_DAX_KMEM=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set

#
# HW tracing support
#
CONFIG_STM=m
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not set
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_ACPI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
CONFIG_F2FS_IOSTAT=y
# CONFIG_F2FS_UNFAIR_RWSEM is not set
# CONFIG_ZONEFS_FS is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
# CONFIG_FUSE_BPF is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
# CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_PSTORE_BLK is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
# CONFIG_NFSD_V4_2_INTER_SSC is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_SMB_DIRECT is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS_COMMON=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEPRECATED_API is not set
CONFIG_DLM_DEBUG=y
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_KEY_NOTIFICATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_INFINIBAND is not set
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
# CONFIG_INTEGRITY_PLATFORM_KEYRING is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STACKLEAK is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# CONFIG_CRYPTO_CURVE25519_X86 is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_HCTR2 is not set
CONFIG_CRYPTO_ESSIV=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_CRC64_ROCKSOFT=m
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLYVAL_CLMUL_NI is not set
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_POLY1305_X86_64=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_SM3_AVX_X86_64 is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_SEED=m
# CONFIG_CRYPTO_ARIA is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
# CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_SWIOTLB=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_PERNUMA_CMA is not set

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_SBITMAP=y
# end of Library routines

CONFIG_ASN1_ENCODER=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=8192
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_OBJTOOL=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
# CONFIG_UBSAN_TRAP is not set
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_SANITIZE_ALL=y
# CONFIG_TEST_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_TABLE_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
# CONFIG_KASAN_OUTLINE is not set
CONFIG_KASAN_INLINE=y
CONFIG_KASAN_STACK=y
CONFIG_KASAN_VMALLOC=y
# CONFIG_KASAN_MODULE_TEST is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=m
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_REF_SCALE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
# CONFIG_FPROBE is not set
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_MMIOTRACE is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_FTRACE_SORT_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
# CONFIG_RV is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set

#
# x86 Debugging
#
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAULT_INJECTION_USERCOPY is not set
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAIL_FUTEX is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAIL_FUNCTION is not set
# CONFIG_FAIL_MMC_REQUEST is not set
# CONFIG_FAIL_SUNRPC is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_SIPHASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_LIVEPATCH is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_HMM is not set
# CONFIG_TEST_FREE_PAGES is not set
# CONFIG_TEST_FPU is not set
# CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking

Re: [PATCH 12/26] fuse-bpf: Add support for fallocate

[Daniel Rosenberg]

On Tue, Sep 27, 2022 at 3:07 PM Dave Chinner <david@fromorbit.com> wrote:
>
> As I browse through this series, I find this pattern unnecessarily
> verbose and it exposes way too much of the filtering mechanism to
> code that should not have to know anything about it.
>
> Wouldn't it be better to code this as:
>
>         error = fuse_filter_fallocate(file, mode, offset, length);
>         if (error < 0)
>                 return error;
>
>
> And then make this fuse_bpf_backing() call and all the indirect
> functions it uses internal (i.e. static) in fs/fuse/backing.c?
>
> That way the interface in fs/fuse/fuse_i.h can be much cleaner and
> handle the #ifdef CONFIG_FUSE_BPF directly by:
>
> #ifdef CONFIG_FUSE_BPF
> ....
> int fuse_filter_fallocate(file, mode, offset, length);
> ....
> #else /* !CONFIG_FUSE_BPF */
> ....
> static inline fuse_filter_fallocate(file, mode, offset, length)
> {
>         return 0;
> }
> ....
> #endif /* CONFIG_FUSE_BPF */
>
> This seems much cleaner to me than exposing fuse_bpf_backing()
> boiler plate all over the code...
>
> Cheers,
>
> Dave.
> --
> Dave Chinner
> david@fromorbit.com
>
> --
> To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com.
>

Thanks for the suggestion, that'll help clean things up a bit. It's
quite nice to have fresh eyes looking over the code.

-Daniel

Re: [PATCH 00/26] FUSE BPF: A Stacked Filesystem Extension for FUSE

[Martin KaFai Lau]

On 9/26/22 4:17 PM, Daniel Rosenberg wrote:
> These patches extend FUSE to be able to act as a stacked filesystem. This
> allows pure passthrough, where the fuse file system simply reflects the lower
> filesystem, and also allows optional pre and post filtering in BPF and/or the
> userspace daemon as needed. This can dramatically reduce or even eliminate
> transitions to and from userspace.
> 
> Currently, we either set the backing file/bpf at mount time at the root level,
> or at lookup time, via an optional block added at the end of the lookup return
> call. The added lookup block contains an fd for the backing file/folder and bpf
> if necessary, or a signal to clear or inherit the parent values. We're looking
> into two options for extending this to mkdir/mknod/etc, as we currently only
> support setting the backing to a pre-existing file, although naturally you can
> create new ones. When we're doing a lookup for create, we could pass an
> fd for the parent dir and the name of the backing file we're creating. This has
> the benefit of avoiding an additional call to userspace, but requires hanging
> on to some data in a negative dentry where there is no elegant place to store it.
> Another option is adding the same block we added to lookup to the create type
> op codes. This keeps that code more uniform, but means userspace must implement
> that logic in more areas.
> 
> As is, the patches definitely need some work before they're ready. We still
> need to go through and ensure we respect changed filter values/disallow changes
> that don't make sense. We aren't currently calling mnt_want_write for the lower
> calls where appropriate, and we don't have an override_creds layer either. We
> also plan to add to our read/write iter filters to allow for more interesting
> use cases. There are also probably some node id inconsistencies. For nodes that
> will be completely passthrough, we give an id of 0.
> 
> For the BPF verification side, we have currently set things set up in the old
> style, with a new bpf program type and helper functions. From LPC, my
> understanding is that newer bpf additions are done in a new style, so I imagine
> much of that will need to be redone as well, but hopefully these patches get
> across what our needs there are.
> 
> For testing, we've provided the selftest code we have been using. We also have
> a mode to run with no userspace daemon in a pure passthrough mode that I have
> been running xfstests over to get some coverage on the backing operation code.
> I had to modify mounts/unmounts to get that running, along with some other
> small touch ups. The most notable failure I currently see there is in
> generic/126, which I suspect is likely related to override_creds.
> 

Interesting idea.

Some comments on review logistics:
- The set is too long and some of the individual patches are way too long for 
one single patch to review.  Keep in mind that not all of us here are experts in 
both fuse and bpf.  Making it easier to review first will help at the beginning. 
  Some ideas:

   - Only implement a few ops in the initial revision. From quickly browsing the 
set, it is implementing the 'struct file_operations fuse_file_operations'? 
Maybe the first few revisions can start with a few of the ops first.

   - Please make the patches that can be applied to the bpf-next tree cleanly. 
For example, in patch 3, where is 18e2ec5bf453 coming from? I cannot find it in 
bpf-next and linux-next tree.
   - Without applying it to an upstream tree cleanly, in a big set like this, I 
have no idea when bpf_prog_run() is called in patch 24 because the diff context 
is in fuse_bpf_cleanup and apparently it is not where the bpf prog is run.

Some high level comments on the set:
- Instead of adding bpf helpers, you should consider kfunc instead. You can take 
a look at the recent HID patchset v10 or the recent nf conntrack bpf set.

- Instead of expressing as packet data, using the recent dynptr is a better way 
to go for handling a mem blob.

- iiuc, the idea is to allow bpf prog to optionally handle the 'struct 
file_operations' without going back to the user daemon? Have you looked at 
struct_ops which seems to be a better fit here?  If the bpf prog does not know 
how to handle an operation (or file?), it can call fuse_file_llseek (for 
example) as a kfunc to handle the request.

- The test SEC("test_trace") seems mostly a synthetic test for checking 
correctness.  Does it have a test that shows a more real life use case? or I 
have missed things in patch 26?

- Please use the skel to load the program.  It is pretty hard to read the loader 
in patch 26.

- I assume the main objective is for performance by not going back to the user 
daemon?  Do you have performance number?

Re: [PATCH 00/26] FUSE BPF: A Stacked Filesystem Extension for FUSE

[Brian Foster]

On Tue, Sep 27, 2022 at 11:41:50PM -0700, Martin KaFai Lau wrote:
> On 9/26/22 4:17 PM, Daniel Rosenberg wrote:
> > These patches extend FUSE to be able to act as a stacked filesystem. This
> > allows pure passthrough, where the fuse file system simply reflects the lower
> > filesystem, and also allows optional pre and post filtering in BPF and/or the
> > userspace daemon as needed. This can dramatically reduce or even eliminate
> > transitions to and from userspace.
> > 
> > Currently, we either set the backing file/bpf at mount time at the root level,
> > or at lookup time, via an optional block added at the end of the lookup return
> > call. The added lookup block contains an fd for the backing file/folder and bpf
> > if necessary, or a signal to clear or inherit the parent values. We're looking
> > into two options for extending this to mkdir/mknod/etc, as we currently only
> > support setting the backing to a pre-existing file, although naturally you can
> > create new ones. When we're doing a lookup for create, we could pass an
> > fd for the parent dir and the name of the backing file we're creating. This has
> > the benefit of avoiding an additional call to userspace, but requires hanging
> > on to some data in a negative dentry where there is no elegant place to store it.
> > Another option is adding the same block we added to lookup to the create type
> > op codes. This keeps that code more uniform, but means userspace must implement
> > that logic in more areas.
> > 
> > As is, the patches definitely need some work before they're ready. We still
> > need to go through and ensure we respect changed filter values/disallow changes
> > that don't make sense. We aren't currently calling mnt_want_write for the lower
> > calls where appropriate, and we don't have an override_creds layer either. We
> > also plan to add to our read/write iter filters to allow for more interesting
> > use cases. There are also probably some node id inconsistencies. For nodes that
> > will be completely passthrough, we give an id of 0.
> > 
> > For the BPF verification side, we have currently set things set up in the old
> > style, with a new bpf program type and helper functions. From LPC, my
> > understanding is that newer bpf additions are done in a new style, so I imagine
> > much of that will need to be redone as well, but hopefully these patches get
> > across what our needs there are.
> > 
> > For testing, we've provided the selftest code we have been using. We also have
> > a mode to run with no userspace daemon in a pure passthrough mode that I have
> > been running xfstests over to get some coverage on the backing operation code.
> > I had to modify mounts/unmounts to get that running, along with some other
> > small touch ups. The most notable failure I currently see there is in
> > generic/126, which I suspect is likely related to override_creds.
> > 
> 
> Interesting idea.
> 
> Some comments on review logistics:
> - The set is too long and some of the individual patches are way too long
> for one single patch to review.  Keep in mind that not all of us here are
> experts in both fuse and bpf.  Making it easier to review first will help at
> the beginning.  Some ideas:
> 
>   - Only implement a few ops in the initial revision. From quickly browsing
> the set, it is implementing the 'struct file_operations
> fuse_file_operations'? Maybe the first few revisions can start with a few of
> the ops first.
> 

I had a similar thought when poking through this. A related question I
had is how much of a functional dependency does the core passthrough
mechanism have on bpf? If bpf is optional for filtering purposes and
isn't absolutely necessary to set up a basic form of passthrough, I
think review would be made easier by splitting off those core bits from
the bpf components so each part is easier to review by people who know
them best. For example, introduce all the fuse enhancements, hooks and
cleanups to set up a passthrough to start the series, then plumb in the
bpf filtering magic on top. Hm?

FWIW, if this is an RFC/prototype and you want more efficient review
cycles, another idea to take that a step further could be to start with
read-only support (or maybe even just directory walking?).

BTW if the bpf bits are optional, how might one mount a fuse/no
daemon/passthrough filesystem from userspace? Is that possible with this
series as is?

Something more on the fuse side.. it looks like we introduce a pattern
where bits of generic request completion processing can end up
duplicated between the shortcut (i.e.  _backing()/_finalize()) handlers
and the traditional post request code, because the shortcuts basically
bypass the entire rest of the codepath. For example, something like
create_new_entry() is currently reused for several inode creation
operations. With passthrough mode, it looks like some of that code (i.e.
vfs dentry fixups) is split off from create_new_entry() into each
individual backing mode handler.

It looks like much of the lower level request processing code was
refactored into the fuse_iqueue to support things like virtiofs. Have
you looked into whether that abstraction can be reused or enhanced to
support bpf filtering, direct passthrough calls, etc.? Or perhaps
whether more of the higher level code could be refactored in a similar
way to encourage more reuse and avoid branching off every fs operation
into a special passthrough codepath?

Brian

>   - Please make the patches that can be applied to the bpf-next tree
> cleanly. For example, in patch 3, where is 18e2ec5bf453 coming from? I
> cannot find it in bpf-next and linux-next tree.
>   - Without applying it to an upstream tree cleanly, in a big set like this,
> I have no idea when bpf_prog_run() is called in patch 24 because the diff
> context is in fuse_bpf_cleanup and apparently it is not where the bpf prog
> is run.
> 
> Some high level comments on the set:
> - Instead of adding bpf helpers, you should consider kfunc instead. You can
> take a look at the recent HID patchset v10 or the recent nf conntrack bpf
> set.
> 
> - Instead of expressing as packet data, using the recent dynptr is a better
> way to go for handling a mem blob.
> 
> - iiuc, the idea is to allow bpf prog to optionally handle the 'struct
> file_operations' without going back to the user daemon? Have you looked at
> struct_ops which seems to be a better fit here?  If the bpf prog does not
> know how to handle an operation (or file?), it can call fuse_file_llseek
> (for example) as a kfunc to handle the request.
> 
> - The test SEC("test_trace") seems mostly a synthetic test for checking
> correctness.  Does it have a test that shows a more real life use case? or I
> have missed things in patch 26?
> 
> - Please use the skel to load the program.  It is pretty hard to read the
> loader in patch 26.
> 
> - I assume the main objective is for performance by not going back to the
> user daemon?  Do you have performance number?
> 

Re: [PATCH 02/26] bpf: verifier: Allow single packet invalidation

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 8161 bytes --]

Hi Daniel,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on bf682942cd26ce9cd5e87f73ae099b383041e782]

url:    https://github.com/intel-lab-lkp/linux/commits/Daniel-Rosenberg/FUSE-BPF-A-Stacked-Filesystem-Extension-for-FUSE/20220927-095052
base:   bf682942cd26ce9cd5e87f73ae099b383041e782
config: powerpc-randconfig-r006-20220925
compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project 791a7ae1ba3efd6bca96338e10ffde557ba83920)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install powerpc cross compiling tool for clang build
        # apt-get install binutils-powerpc-linux-gnu
        # https://github.com/intel-lab-lkp/linux/commit/2be5946421bc5b6135b701f5362e0b591836ecc1
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Daniel-Rosenberg/FUSE-BPF-A-Stacked-Filesystem-Extension-for-FUSE/20220927-095052
        git checkout 2be5946421bc5b6135b701f5362e0b591836ecc1
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=powerpc SHELL=/bin/bash kernel/bpf/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   In file included from include/linux/skbuff.h:17:
   In file included from include/linux/bvec.h:10:
   In file included from include/linux/highmem.h:11:
   In file included from include/linux/hardirq.h:11:
   In file included from arch/powerpc/include/asm/hardirq.h:6:
   In file included from include/linux/irq.h:20:
   In file included from include/linux/io.h:13:
   In file included from arch/powerpc/include/asm/io.h:640:
   arch/powerpc/include/asm/io-defs.h:47:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
   DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c),
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/powerpc/include/asm/io.h:637:3: note: expanded from macro 'DEF_PCI_AC_NORET'
                   __do_##name al;                                 \
                   ^~~~~~~~~~~~~~
   <scratch space>:13:1: note: expanded from here
   __do_insl
   ^
   arch/powerpc/include/asm/io.h:579:56: note: expanded from macro '__do_insl'
   #define __do_insl(p, b, n)      readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
                                          ~~~~~~~~~~~~~~~~~~~~~^
   In file included from kernel/bpf/core.c:21:
   In file included from include/linux/filter.h:12:
   In file included from include/linux/skbuff.h:17:
   In file included from include/linux/bvec.h:10:
   In file included from include/linux/highmem.h:11:
   In file included from include/linux/hardirq.h:11:
   In file included from arch/powerpc/include/asm/hardirq.h:6:
   In file included from include/linux/irq.h:20:
   In file included from include/linux/io.h:13:
   In file included from arch/powerpc/include/asm/io.h:640:
   arch/powerpc/include/asm/io-defs.h:49:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
   DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c),
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/powerpc/include/asm/io.h:637:3: note: expanded from macro 'DEF_PCI_AC_NORET'
                   __do_##name al;                                 \
                   ^~~~~~~~~~~~~~
   <scratch space>:15:1: note: expanded from here
   __do_outsb
   ^
   arch/powerpc/include/asm/io.h:580:58: note: expanded from macro '__do_outsb'
   #define __do_outsb(p, b, n)     writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
                                           ~~~~~~~~~~~~~~~~~~~~~^
   In file included from kernel/bpf/core.c:21:
   In file included from include/linux/filter.h:12:
   In file included from include/linux/skbuff.h:17:
   In file included from include/linux/bvec.h:10:
   In file included from include/linux/highmem.h:11:
   In file included from include/linux/hardirq.h:11:
   In file included from arch/powerpc/include/asm/hardirq.h:6:
   In file included from include/linux/irq.h:20:
   In file included from include/linux/io.h:13:
   In file included from arch/powerpc/include/asm/io.h:640:
   arch/powerpc/include/asm/io-defs.h:51:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
   DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c),
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/powerpc/include/asm/io.h:637:3: note: expanded from macro 'DEF_PCI_AC_NORET'
                   __do_##name al;                                 \
                   ^~~~~~~~~~~~~~
   <scratch space>:17:1: note: expanded from here
   __do_outsw
   ^
   arch/powerpc/include/asm/io.h:581:58: note: expanded from macro '__do_outsw'
   #define __do_outsw(p, b, n)     writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
                                           ~~~~~~~~~~~~~~~~~~~~~^
   In file included from kernel/bpf/core.c:21:
   In file included from include/linux/filter.h:12:
   In file included from include/linux/skbuff.h:17:
   In file included from include/linux/bvec.h:10:
   In file included from include/linux/highmem.h:11:
   In file included from include/linux/hardirq.h:11:
   In file included from arch/powerpc/include/asm/hardirq.h:6:
   In file included from include/linux/irq.h:20:
   In file included from include/linux/io.h:13:
   In file included from arch/powerpc/include/asm/io.h:640:
   arch/powerpc/include/asm/io-defs.h:53:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
   DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c),
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/powerpc/include/asm/io.h:637:3: note: expanded from macro 'DEF_PCI_AC_NORET'
                   __do_##name al;                                 \
                   ^~~~~~~~~~~~~~
   <scratch space>:19:1: note: expanded from here
   __do_outsl
   ^
   arch/powerpc/include/asm/io.h:582:58: note: expanded from macro '__do_outsl'
   #define __do_outsl(p, b, n)     writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
                                           ~~~~~~~~~~~~~~~~~~~~~^
   kernel/bpf/core.c:1623:12: warning: no previous prototype for function 'bpf_probe_read_kernel' [-Wmissing-prototypes]
   u64 __weak bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr)
              ^
   kernel/bpf/core.c:1623:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
   u64 __weak bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr)
   ^
   static 
   kernel/bpf/core.c:2062:6: warning: no previous prototype for function 'bpf_patch_call_args' [-Wmissing-prototypes]
   void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth)
        ^
   kernel/bpf/core.c:2062:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
   void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth)
   ^
   static 
>> kernel/bpf/core.c:2688:13: warning: no previous prototype for function 'bpf_helper_changes_one_pkt_data' [-Wmissing-prototypes]
   bool __weak bpf_helper_changes_one_pkt_data(void *func)
               ^
   kernel/bpf/core.c:2688:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
   bool __weak bpf_helper_changes_one_pkt_data(void *func)
   ^
   static 
   9 warnings generated.


vim +/bpf_helper_changes_one_pkt_data +2688 kernel/bpf/core.c

  2687	
> 2688	bool __weak bpf_helper_changes_one_pkt_data(void *func)
  2689	{
  2690		return false;
  2691	}
  2692	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 146147 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 6.0.0-rc6 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="clang version 16.0.0 (git://gitmirror/llvm_project 791a7ae1ba3efd6bca96338e10ffde557ba83920)"
CONFIG_GCC_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_CLANG_VERSION=160000
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_VERSION=0
CONFIG_LD_IS_LLD=y
CONFIG_LLD_VERSION=160000
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_KERNEL_GZIP=y
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_KUNIT_TEST=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# CONFIG_BPF_JIT is not set
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
# CONFIG_FORCE_TASKS_RCU is not set
# CONFIG_FORCE_TASKS_RUDE_RCU is not set
CONFIG_TASKS_RUDE_RCU=y
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_MISC=y
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_NAMESPACES is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
CONFIG_RD_LZO=y
# CONFIG_RD_LZ4 is not set
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
# CONFIG_BOOT_CONFIG_EMBED is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
# CONFIG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters

CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_PPC32=y
# CONFIG_PPC64 is not set

#
# Processor support
#
# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
CONFIG_E500MC_CPU=y
# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
CONFIG_TARGET_CPU_BOOL=y
CONFIG_TARGET_CPU="e500mc"
CONFIG_E500=y
CONFIG_PPC_E500MC=y
CONFIG_PPC_FPU_REGS=y
CONFIG_PPC_FPU=y
CONFIG_FSL_EMB_PERFMON=y
CONFIG_FSL_EMB_PERF_EVENT=y
CONFIG_FSL_EMB_PERF_EVENT_E500=y
CONFIG_BOOKE=y
CONFIG_BOOKE_OR_40x=y
CONFIG_FSL_BOOKE=y
CONFIG_PPC_FSL_BOOK3E=y
# CONFIG_PHYS_64BIT is not set
CONFIG_PPC_KUEP=y
CONFIG_PPC_KUAP=y
# CONFIG_PPC_KUAP_DEBUG is not set
CONFIG_PPC_MMU_NOHASH=y
CONFIG_PPC_BOOK3E_MMU=y
CONFIG_PMU_SYSFS=y
# CONFIG_SMP is not set
CONFIG_NR_CPUS=1
CONFIG_PPC_DOORBELL=y
# end of Processor support

CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_32BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
CONFIG_PPC_BARRIER_NOSPEC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=180
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_HAS_ADD_PAGES=y
# CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT is not set
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PPC_ADV_DEBUG_REGS=y
CONFIG_PPC_ADV_DEBUG_IACS=2
CONFIG_PPC_ADV_DEBUG_DACS=2
CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_PGTABLE_LEVELS=2

#
# Platform support
#
CONFIG_SCOM_DEBUGFS=y
# CONFIG_FSL_SOC_BOOKE is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_SMP_MUXED_IPI=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling

#
# CPUIdle driver
#

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
CONFIG_CPU_IDLE_GOV_HALTPOLL=y

#
# POWERPC CPU Idle Drivers
#
# end of POWERPC CPU Idle Drivers
# end of CPU Idle
# end of CPUIdle driver

# CONFIG_GEN_RTC is not set
# end of Platform support

#
# Kernel options
#
CONFIG_HIGHMEM=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_MATH_EMULATION is not set
CONFIG_KEXEC=y
# CONFIG_RELOCATABLE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_PPC_4K_PAGES=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PPC_PAGE_SHIFT=12
CONFIG_THREAD_SHIFT=13
# CONFIG_DATA_SHIFT_BOOL is not set
CONFIG_DATA_SHIFT=24
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_OF=y
# end of Kernel options

#
# Bus options
#
CONFIG_FSL_LBC=y
# end of Bus options

CONFIG_NONSTATIC_KERNEL=y

#
# Advanced setup
#
CONFIG_ADVANCED_OPTIONS=y
CONFIG_LOWMEM_SIZE_BOOL=y
CONFIG_LOWMEM_SIZE=0x30000000
# CONFIG_LOWMEM_CAM_NUM_BOOL is not set
CONFIG_LOWMEM_CAM_NUM=9
CONFIG_DYNAMIC_MEMSTART=y
CONFIG_PAGE_OFFSET_BOOL=y
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START_BOOL=y
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START_BOOL=y
CONFIG_PHYSICAL_START=0x00000000
CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE_BOOL=y
CONFIG_TASK_SIZE=0xc0000000
# end of Advanced setup

CONFIG_VIRTUALIZATION=y
# CONFIG_KVM_E500MC is not set
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_PAGE_SIZE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
# CONFIG_SECCOMP is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=11
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_HAVE_ARCH_NVRAM_OPS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_OLD_SIGACTION=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=m
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_DEBUG_FS is not set
CONFIG_BLK_SED_OPAL=y
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
# CONFIG_ACORN_PARTITION_RISCIX is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
# CONFIG_MSDOS_PARTITION is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
# end of Partition Types

CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=m
# end of IO Schedulers

CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_KUNIT_TEST=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
# CONFIG_SWAP is not set

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_STATS is not set
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_BOUNCE=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
# CONFIG_USERFAULTFD is not set

#
# Data Access Monitoring
#
CONFIG_DAMON=y
CONFIG_DAMON_KUNIT_TEST=y
# CONFIG_DAMON_VADDR is not set
# CONFIG_DAMON_PADDR is not set
# CONFIG_DAMON_SYSFS is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=m
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_ATM=y
# CONFIG_ATM_LANE is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE_MRP=y
CONFIG_BRIDGE_CFM=y
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=m
# CONFIG_IPDDP is not set
# CONFIG_X25 is not set
CONFIG_LAPB=m
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
# CONFIG_IEEE802154_SOCKET is not set
CONFIG_MAC802154=m
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_NC is not set
CONFIG_BATMAN_ADV_DEBUG=y
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_NETLINK_DIAG=y
# CONFIG_MPLS is not set
CONFIG_NET_NSH=y
CONFIG_HSR=m
# CONFIG_QRTR is not set
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=y
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m
# CONFIG_BT is not set
# CONFIG_MCTP is not set
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
# CONFIG_CFG80211_REQUIRE_SIGNED_REGDB is not set
CONFIG_CFG80211_REG_CELLULAR_HINTS=y
# CONFIG_CFG80211_REG_RELAX_NO_IR is not set
# CONFIG_CFG80211_DEFAULT_PS is not set
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_CRDA_SUPPORT is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT=""

#
# Some wireless drivers require a rate control algorithm
#
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
CONFIG_MAC80211_DEBUG_MENU=y
# CONFIG_MAC80211_NOINLINE is not set
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_MLME_DEBUG=y
CONFIG_MAC80211_STA_DEBUG=y
# CONFIG_MAC80211_HT_DEBUG is not set
# CONFIG_MAC80211_OCB_DEBUG is not set
# CONFIG_MAC80211_IBSS_DEBUG is not set
# CONFIG_MAC80211_PS_DEBUG is not set
CONFIG_MAC80211_MPL_DEBUG=y
# CONFIG_MAC80211_MPATH_DEBUG is not set
CONFIG_MAC80211_MHWMP_DEBUG=y
# CONFIG_MAC80211_MESH_SYNC_DEBUG is not set
CONFIG_MAC80211_MESH_CSA_DEBUG=y
CONFIG_MAC80211_MESH_PS_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
# CONFIG_MAC80211_DEBUG_COUNTERS is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
# CONFIG_CAIF_NETDEV is not set
CONFIG_CAIF_USB=y
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_GRO_CELLS=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=y

#
# Device Drivers
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set

#
# PC-card bridges
#

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=m
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SCCB=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
CONFIG_QCOM_EBI2=y
CONFIG_FSL_MC_BUS=y
CONFIG_FSL_MC_UAPI_SUPPORT=y
CONFIG_MHI_BUS=m
# CONFIG_MHI_BUS_DEBUG is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

CONFIG_CONNECTOR=m

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol

CONFIG_ARM_SCPI_POWER_DOMAIN=m
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_QCOM_SCM=m
CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT=y
# CONFIG_BCM47XX_NVRAM is not set
CONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_COREBOOT_TABLE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=m
CONFIG_GNSS_SERIAL=m
CONFIG_GNSS_MTK_SERIAL=m
CONFIG_GNSS_SIRF_SERIAL=m
CONFIG_GNSS_UBX_SERIAL=m
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_OF_DMA_DEFAULT_COHERENT=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_CDROM=m
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8

#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=m
CONFIG_NVME_FC=m
# CONFIG_NVME_AUTH is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HI6421V600_IRQ is not set
CONFIG_QCOM_COINCELL=m
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=m
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=m
# CONFIG_DS1682 is not set
CONFIG_SRAM=y
CONFIG_XILINX_SDFEC=m
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
CONFIG_C2PORT=y

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=m
# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
CONFIG_UACCE=m
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=y
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support

# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BCACHE=m
CONFIG_BCACHE_DEBUG=y
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BCACHE_ASYNC_REGISTRATION=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
# CONFIG_DM_THIN_PROVISIONING is not set
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_WRITECACHE is not set
CONFIG_DM_ERA=m
CONFIG_DM_CLONE=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_MULTIPATH_HST=m
# CONFIG_DM_MULTIPATH_IOA is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
# CONFIG_DM_UEVENT is not set
CONFIG_DM_FLAKEY=m
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_DM_ZONED=m
CONFIG_TARGET_CORE=y
# CONFIG_TCM_IBLOCK is not set
CONFIG_TCM_FILEIO=y
# CONFIG_TCM_PSCSI is not set
# CONFIG_LOOPBACK_TARGET is not set
CONFIG_SBP_TARGET=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_SBP2=m
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_WINDFARM=m
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
CONFIG_NET_TEAM=m
# CONFIG_NET_TEAM_MODE_BROADCAST is not set
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
# CONFIG_NET_TEAM_MODE_LOADBALANCE is not set
CONFIG_MACVLAN=m
CONFIG_MACSEC=m
# CONFIG_NETCONSOLE is not set
CONFIG_TUN_VNET_CROSS_LE=y
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=y
CONFIG_MHI_NET=m
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_CAIF_DRIVERS is not set
# CONFIG_ETHERNET is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
CONFIG_MESON_GXL_PHY=y
CONFIG_ADIN_PHY=m
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AX88796B_PHY=m
CONFIG_BROADCOM_PHY=y
CONFIG_BCM54140_PHY=y
# CONFIG_BCM63XX_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM84881_PHY=y
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=y
CONFIG_CICADA_PHY=y
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=m
CONFIG_ICPLUS_PHY=y
CONFIG_LXT_PHY=m
CONFIG_INTEL_XWAY_PHY=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MARVELL_PHY=y
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
CONFIG_MAXLINEAR_GPHY=m
# CONFIG_MEDIATEK_GE_PHY is not set
CONFIG_MICREL_PHY=m
CONFIG_MICROCHIP_PHY=m
# CONFIG_MICROCHIP_T1_PHY is not set
CONFIG_MICROSEMI_PHY=m
CONFIG_MOTORCOMM_PHY=m
# CONFIG_NATIONAL_PHY is not set
CONFIG_NXP_C45_TJA11XX_PHY=y
# CONFIG_NXP_TJA11XX_PHY is not set
CONFIG_AT803X_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
CONFIG_ROCKCHIP_PHY=y
CONFIG_SMSC_PHY=y
# CONFIG_STE10XP is not set
CONFIG_TERANETICS_PHY=y
# CONFIG_DP83822_PHY is not set
CONFIG_DP83TC811_PHY=y
# CONFIG_DP83848_PHY is not set
CONFIG_DP83867_PHY=y
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
CONFIG_VITESSE_PHY=m
CONFIG_XILINX_GMII2RGMII=y
CONFIG_CAN_DEV=m
CONFIG_CAN_VCAN=m
CONFIG_CAN_VXCAN=m
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_RX_OFFLOAD=y
# CONFIG_CAN_AT91 is not set
# CONFIG_CAN_CAN327 is not set
CONFIG_CAN_FLEXCAN=m
CONFIG_CAN_GRCAN=m
CONFIG_CAN_SLCAN=m
# CONFIG_CAN_SUN4I is not set
CONFIG_CAN_XILINXCAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_CC770=m
CONFIG_CAN_CC770_ISA=m
CONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_CTUCANFD is not set
# CONFIG_CAN_CTUCANFD_PLATFORM is not set
# CONFIG_CAN_IFI_CANFD is not set
CONFIG_CAN_M_CAN=m
CONFIG_CAN_M_CAN_PLATFORM=m
CONFIG_CAN_MSCAN=m
CONFIG_CAN_RCAR=m
CONFIG_CAN_RCAR_CANFD=m
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
# CONFIG_CAN_SOFTING is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
CONFIG_MDIO_SUN4I=y
CONFIG_MDIO_XGENE=m
CONFIG_MDIO_ASPEED=m
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_BCM_IPROC is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
CONFIG_MDIO_CAVIUM=y
CONFIG_MDIO_GPIO=y
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MSCC_MIIM is not set
CONFIG_MDIO_MOXART=y
CONFIG_MDIO_OCTEON=y
CONFIG_MDIO_IPQ4019=y
CONFIG_MDIO_IPQ8064=y

#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_MESON_G12A=m
CONFIG_MDIO_BUS_MUX_BCM6368=m
CONFIG_MDIO_BUS_MUX_BCM_IPROC=m
CONFIG_MDIO_BUS_MUX_GPIO=m
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=m
CONFIG_MDIO_BUS_MUX_MMIOREG=y

#
# PCS device drivers
#
# CONFIG_PCS_RZN1_MIIC is not set
# end of PCS device drivers

CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPPOATM is not set
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH_DEBUG=y
# CONFIG_ATH_TRACEPOINTS is not set
CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS=y
CONFIG_ATH_REG_DYNAMIC_USER_CERT_TESTING=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_DFS_DEBUGFS=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
# CONFIG_ATH9K_STATION_STATISTICS is not set
# CONFIG_ATH9K_TX99 is not set
CONFIG_ATH9K_DFS_CERTIFIED=y
# CONFIG_ATH9K_DYNACK is not set
# CONFIG_ATH9K_WOW is not set
CONFIG_ATH9K_CHANNEL_CONTEXT=y
# CONFIG_ATH9K_PCOEM is not set
# CONFIG_ATH9K_COMMON_SPECTRAL is not set
CONFIG_ATH6KL=m
CONFIG_ATH6KL_DEBUG=y
# CONFIG_ATH6KL_TRACING is not set
CONFIG_ATH6KL_REGDOMAIN=y
CONFIG_ATH10K=m
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_SNOC=m
# CONFIG_ATH10K_DEBUG is not set
# CONFIG_ATH10K_DEBUGFS is not set
CONFIG_ATH10K_TRACING=y
CONFIG_ATH10K_DFS_CERTIFIED=y
CONFIG_WCN36XX=m
CONFIG_WCN36XX_DEBUGFS=y
CONFIG_ATH11K=m
# CONFIG_ATH11K_DEBUG is not set
CONFIG_ATH11K_DEBUGFS=y
# CONFIG_ATH11K_TRACING is not set
# CONFIG_ATH11K_SPECTRAL is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_WLAN_VENDOR_BROADCOM is not set
# CONFIG_WLAN_VENDOR_CISCO is not set
# CONFIG_WLAN_VENDOR_INTEL is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_P54_COMMON=m
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
CONFIG_LIBERTAS_THINFIRM=m
CONFIG_LIBERTAS_THINFIRM_DEBUG=y
CONFIG_MWIFIEX=m
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
# CONFIG_WLAN_VENDOR_REALTEK is not set
# CONFIG_WLAN_VENDOR_RSI is not set
CONFIG_WLAN_VENDOR_SILABS=y
# CONFIG_WLAN_VENDOR_ST is not set
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_WLAN_VENDOR_QUANTENNA is not set
CONFIG_MAC80211_HWSIM=m
CONFIG_VIRT_WIFI=m
CONFIG_WAN=y
# CONFIG_HDLC is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_HWSIM is not set

#
# Wireless WAN
#
CONFIG_WWAN=m
CONFIG_WWAN_DEBUGFS=y
CONFIG_WWAN_HWSIM=m
CONFIG_MHI_WWAN_CTRL=m
CONFIG_MHI_WWAN_MBIM=m
# CONFIG_QCOM_BAM_DMUX is not set
# end of Wireless WAN

CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=m
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
CONFIG_INPUT_VIVALDIFMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_QT1050 is not set
CONFIG_KEYBOARD_QT1070=m
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_CLPS711X=m
CONFIG_KEYBOARD_DLINK_DIR685=m
CONFIG_KEYBOARD_LKKBD=m
# CONFIG_KEYBOARD_EP93XX is not set
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
# CONFIG_KEYBOARD_IMX is not set
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_PMIC8XXX=m
# CONFIG_KEYBOARD_SAMSUNG is not set
CONFIG_KEYBOARD_GOLDFISH_EVENTS=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_ST_KEYSCAN=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_SH_KEYSC=m
CONFIG_KEYBOARD_STMPE=m
CONFIG_KEYBOARD_OMAP4=m
# CONFIG_KEYBOARD_TC3589X is not set
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CROS_EC is not set
CONFIG_KEYBOARD_CAP11XX=m
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_KEYBOARD_MT6779 is not set
CONFIG_KEYBOARD_MTK_PMIC=m
# CONFIG_KEYBOARD_CYPRESS_SF is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=m
# CONFIG_INPUT_88PM80X_ONKEY is not set
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATC260X_ONKEY is not set
CONFIG_INPUT_ATMEL_CAPTOUCH=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_E3X0_BUTTON=m
CONFIG_INPUT_PM8941_PWRKEY=m
CONFIG_INPUT_PM8XXX_VIBRATOR=m
# CONFIG_INPUT_PMIC8XXX_PWRKEY is not set
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_GPIO_BEEPER=m
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
CONFIG_INPUT_RETU_PWRBUTTON=m
CONFIG_INPUT_TPS65218_PWRBUTTON=m
CONFIG_INPUT_AXP20X_PEK=m
# CONFIG_INPUT_TWL6040_VIBRA is not set
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PALMAS_PWRBUTTON=m
# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_PWM_VIBRA=m
CONFIG_INPUT_RK805_PWRKEY=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_DA9055_ONKEY is not set
CONFIG_INPUT_DA9063_ONKEY=m
# CONFIG_INPUT_WM831X_ON is not set
CONFIG_INPUT_ADXL34X=m
# CONFIG_INPUT_ADXL34X_I2C is not set
# CONFIG_INPUT_IQS269A is not set
CONFIG_INPUT_IQS626A=m
# CONFIG_INPUT_IQS7222 is not set
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
CONFIG_INPUT_DRV2667_HAPTICS=m
# CONFIG_INPUT_HISI_POWERKEY is not set
CONFIG_INPUT_SC27XX_VIBRA=m
# CONFIG_INPUT_STPMIC1_ONKEY is not set
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
CONFIG_RMI4_F3A=y
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
CONFIG_SERIO_XILINX_XPS_PS2=m
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=m
CONFIG_SERIO_OLPC_APSP=m
CONFIG_SERIO_SUN4I_PS2=y
CONFIG_SERIO_GPIO_PS2=m
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LDISC_AUTOLOAD is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_ASPEED_VUART is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_EM=y
# CONFIG_SERIAL_8250_IOC3 is not set
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_OMAP=y
# CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP is not set
CONFIG_SERIAL_8250_LPC18XX=y
# CONFIG_SERIAL_8250_MT6577 is not set
# CONFIG_SERIAL_8250_UNIPHIER is not set
# CONFIG_SERIAL_8250_INGENIC is not set
CONFIG_SERIAL_8250_PXA=y
CONFIG_SERIAL_8250_TEGRA=y
CONFIG_SERIAL_8250_BCM7271=m
CONFIG_SERIAL_OF_PLATFORM=m

#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=y
# CONFIG_SERIAL_AMBA_PL010_CONSOLE is not set
# CONFIG_SERIAL_ATMEL is not set
CONFIG_SERIAL_MESON=m
# CONFIG_SERIAL_MESON_CONSOLE is not set
CONFIG_SERIAL_CLPS711X=m
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
# CONFIG_SERIAL_TEGRA is not set
CONFIG_SERIAL_IMX=y
# CONFIG_SERIAL_IMX_CONSOLE is not set
CONFIG_SERIAL_IMX_EARLYCON=y
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_SH_SCI is not set
CONFIG_SERIAL_HS_LPC32XX=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_CPM is not set
CONFIG_SERIAL_MSM=m
CONFIG_SERIAL_QCOM_GENI=m
# CONFIG_SERIAL_QCOM_GENI_CONSOLE is not set
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
CONFIG_SERIAL_SC16IS7XX=m
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_BCM63XX is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE is not set
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_MXS_AUART=m
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART=y
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_FSL_LINFLEXUART=m
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
CONFIG_SERIAL_ST_ASC=m
# CONFIG_SERIAL_SPRD is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_MVEBU_UART is not set
# CONFIG_SERIAL_OWL is not set
# CONFIG_SERIAL_RDA is not set
CONFIG_SERIAL_MILBEAUT_USIO=m
CONFIG_SERIAL_MILBEAUT_USIO_PORTS=4
# CONFIG_SERIAL_LITEUART is not set
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
# CONFIG_N_GSM is not set
CONFIG_NULL_TTY=y
CONFIG_HVC_DRIVER=y
CONFIG_HVC_UDBG=y
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
# CONFIG_IPMI_IPMB is not set
CONFIG_IPMI_WATCHDOG=y
# CONFIG_IPMI_POWEROFF is not set
CONFIG_IPMI_KCS_BMC=m
CONFIG_ASPEED_KCS_IPMI_BMC=m
CONFIG_NPCM7XX_KCS_IPMI_BMC=m
CONFIG_IPMI_KCS_BMC_CDEV_IPMI=m
# CONFIG_IPMI_KCS_BMC_SERIO is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
# CONFIG_HW_RANDOM is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
# CONFIG_TCG_TPM is not set
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
# CONFIG_XILLYBUS_OF is not set
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_DEMUX_PINCTRL is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support

# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms

#
# I2C Hardware Bus support
#
# CONFIG_I2C_HIX5HD2 is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=m
# CONFIG_I2C_ASPEED is not set
CONFIG_I2C_AT91=y
CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL=y
CONFIG_I2C_AXXIA=y
CONFIG_I2C_BCM2835=m
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
# CONFIG_I2C_BRCMSTB is not set
CONFIG_I2C_CADENCE=m
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DAVINCI=m
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DIGICOLOR=m
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_EXYNOS5=m
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
CONFIG_I2C_HIGHLANDER=m
# CONFIG_I2C_HISI is not set
CONFIG_I2C_IMG=y
# CONFIG_I2C_IMX is not set
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_IOP3XX=m
# CONFIG_I2C_JZ4780 is not set
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_LPC2K=y
CONFIG_I2C_MESON=y
# CONFIG_I2C_MICROCHIP_CORE is not set
CONFIG_I2C_MPC=m
CONFIG_I2C_MT65XX=y
CONFIG_I2C_MT7621=m
CONFIG_I2C_MV64XXX=m
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=m
CONFIG_I2C_OWL=y
# CONFIG_I2C_APPLE is not set
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PNX=y
# CONFIG_I2C_PXA is not set
CONFIG_I2C_QCOM_CCI=m
CONFIG_I2C_QCOM_GENI=m
CONFIG_I2C_QUP=m
# CONFIG_I2C_RIIC is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_SPRD=m
# CONFIG_I2C_ST is not set
CONFIG_I2C_STM32F4=m
CONFIG_I2C_STM32F7=y
# CONFIG_I2C_SUN6I_P2WI is not set
CONFIG_I2C_SYNQUACER=m
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
CONFIG_I2C_VERSATILE=m
CONFIG_I2C_WMT=y
# CONFIG_I2C_XILINX is not set
CONFIG_I2C_XLP9XX=m
# CONFIG_I2C_RCAR is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_TAOS_EVM=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
# CONFIG_I2C_CROS_EC_TUNNEL is not set
# CONFIG_I2C_FSI is not set
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
# CONFIG_I2C_SLAVE_TESTUNIT is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

CONFIG_I3C=m
# CONFIG_CDNS_I3C_MASTER is not set
# CONFIG_DW_I3C_MASTER is not set
# CONFIG_SVC_I3C_MASTER is not set
CONFIG_MIPI_I3C_HCI=m
# CONFIG_SPI is not set
CONFIG_SPMI=m
CONFIG_SPMI_HISI3670=m
CONFIG_SPMI_MSM_PMIC_ARB=m
# CONFIG_SPMI_MTK_PMIF is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=m
# CONFIG_PPS is not set

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_AS3722=m
CONFIG_PINCTRL_AT91PIO4=y
CONFIG_PINCTRL_AXP209=m
# CONFIG_PINCTRL_BM1880 is not set
# CONFIG_PINCTRL_DA850_PUPD is not set
CONFIG_PINCTRL_DA9062=m
# CONFIG_PINCTRL_EQUILIBRIUM is not set
CONFIG_PINCTRL_INGENIC=y
CONFIG_PINCTRL_LPC18XX=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08=m
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
CONFIG_PINCTRL_OCELOT=y
# CONFIG_PINCTRL_PALMAS is not set
CONFIG_PINCTRL_PISTACHIO=y
CONFIG_PINCTRL_RK805=m
# CONFIG_PINCTRL_ROCKCHIP is not set
CONFIG_PINCTRL_SINGLE=y
# CONFIG_PINCTRL_STARFIVE is not set
CONFIG_PINCTRL_STMFX=m
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
CONFIG_PINCTRL_S700=y
# CONFIG_PINCTRL_S900 is not set
CONFIG_PINCTRL_ASPEED=y
CONFIG_PINCTRL_ASPEED_G4=y
CONFIG_PINCTRL_ASPEED_G5=y
CONFIG_PINCTRL_ASPEED_G6=y
CONFIG_PINCTRL_BCM281XX=y
# CONFIG_PINCTRL_BCM2835 is not set
# CONFIG_PINCTRL_BCM4908 is not set
CONFIG_PINCTRL_BCM63XX=y
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
CONFIG_PINCTRL_BCM6362=y
# CONFIG_PINCTRL_BCM6368 is not set
CONFIG_PINCTRL_BCM63268=y
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
CONFIG_PINCTRL_NS=y
# CONFIG_PINCTRL_NSP_GPIO is not set
CONFIG_PINCTRL_NS2_MUX=y
CONFIG_PINCTRL_NSP_MUX=y
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
# CONFIG_PINCTRL_LOCHNAGAR is not set
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L85=y

#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
# CONFIG_PINCTRL_MT2701 is not set
CONFIG_PINCTRL_MT7623=y
CONFIG_PINCTRL_MT7629=y
# CONFIG_PINCTRL_MT8135 is not set
CONFIG_PINCTRL_MT8127=y
# CONFIG_PINCTRL_MT2712 is not set
CONFIG_PINCTRL_MT6765=y
# CONFIG_PINCTRL_MT6779 is not set
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
CONFIG_PINCTRL_MT7622=y
# CONFIG_PINCTRL_MT7986 is not set
CONFIG_PINCTRL_MT8167=y
CONFIG_PINCTRL_MT8173=y
CONFIG_PINCTRL_MT8183=y
# CONFIG_PINCTRL_MT8186 is not set
# CONFIG_PINCTRL_MT8192 is not set
CONFIG_PINCTRL_MT8195=y
CONFIG_PINCTRL_MT8365=y
CONFIG_PINCTRL_MT8516=y
# CONFIG_PINCTRL_MT6397 is not set
# end of MediaTek pinctrl drivers

CONFIG_PINCTRL_MESON=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
CONFIG_PINCTRL_PXA=y
CONFIG_PINCTRL_PXA25X=y
CONFIG_PINCTRL_PXA27X=m
# CONFIG_PINCTRL_MSM is not set
CONFIG_PINCTRL_QCOM_SPMI_PMIC=m
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
# CONFIG_PINCTRL_LPASS_LPI is not set

#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
# CONFIG_PINCTRL_PFC_EMEV2 is not set
CONFIG_PINCTRL_PFC_R8A77995=y
CONFIG_PINCTRL_PFC_R8A7794=y
CONFIG_PINCTRL_PFC_R8A77990=y
CONFIG_PINCTRL_PFC_R8A7779=y
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
CONFIG_PINCTRL_PFC_R8A77951=y
CONFIG_PINCTRL_PFC_R8A7778=y
CONFIG_PINCTRL_PFC_R8A7793=y
# CONFIG_PINCTRL_PFC_R8A7791 is not set
CONFIG_PINCTRL_PFC_R8A77965=y
CONFIG_PINCTRL_PFC_R8A77960=y
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
CONFIG_PINCTRL_PFC_R8A7792=y
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
CONFIG_PINCTRL_RZA2=y
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
CONFIG_PINCTRL_PFC_R8A7745=y
# CONFIG_PINCTRL_PFC_R8A7742 is not set
CONFIG_PINCTRL_PFC_R8A7743=y
CONFIG_PINCTRL_PFC_R8A7744=y
CONFIG_PINCTRL_PFC_R8A774C0=y
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
CONFIG_PINCTRL_PFC_SH7785=y
# CONFIG_PINCTRL_PFC_SH7786 is not set
CONFIG_PINCTRL_PFC_SH73A0=y
CONFIG_PINCTRL_PFC_SH7723=y
CONFIG_PINCTRL_PFC_SH7724=y
CONFIG_PINCTRL_PFC_SHX3=y
# end of Renesas pinctrl drivers

CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
CONFIG_PINCTRL_EXYNOS_ARM=y
CONFIG_PINCTRL_EXYNOS_ARM64=y
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
CONFIG_PINCTRL_STM32=y
# CONFIG_PINCTRL_STM32F429 is not set
CONFIG_PINCTRL_STM32F469=y
CONFIG_PINCTRL_STM32F746=y
CONFIG_PINCTRL_STM32F769=y
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
CONFIG_PINCTRL_STM32MP157=y
CONFIG_PINCTRL_TI_IODELAY=m
CONFIG_PINCTRL_UNIPHIER=y
CONFIG_PINCTRL_UNIPHIER_LD4=y
CONFIG_PINCTRL_UNIPHIER_PRO4=y
# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
CONFIG_PINCTRL_UNIPHIER_PRO5=y
CONFIG_PINCTRL_UNIPHIER_PXS2=y
CONFIG_PINCTRL_UNIPHIER_LD6B=y
CONFIG_PINCTRL_UNIPHIER_LD11=y
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
CONFIG_PINCTRL_UNIPHIER_PXS3=y
# CONFIG_PINCTRL_UNIPHIER_NX1 is not set
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_CDEV is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_ASPEED=m
CONFIG_GPIO_ASPEED_SGPIO=y
CONFIG_GPIO_ATH79=m
CONFIG_GPIO_RASPBERRYPI_EXP=m
CONFIG_GPIO_BCM_KONA=y
CONFIG_GPIO_BCM_XGS_IPROC=m
CONFIG_GPIO_BRCMSTB=m
CONFIG_GPIO_CADENCE=y
CONFIG_GPIO_CLPS711X=m
# CONFIG_GPIO_DWAPB is not set
CONFIG_GPIO_EIC_SPRD=y
CONFIG_GPIO_EM=m
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=m
CONFIG_GPIO_IOP=m
CONFIG_GPIO_LOGICVC=m
CONFIG_GPIO_LPC18XX=m
# CONFIG_GPIO_LPC32XX is not set
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MPC8XXX is not set
CONFIG_GPIO_MT7621=y
CONFIG_GPIO_MXC=y
CONFIG_GPIO_MXS=y
CONFIG_GPIO_PMIC_EIC_SPRD=m
CONFIG_GPIO_PXA=y
CONFIG_GPIO_RCAR=m
CONFIG_GPIO_RDA=y
# CONFIG_GPIO_ROCKCHIP is not set
CONFIG_GPIO_SAMA5D2_PIOBU=y
CONFIG_GPIO_SIFIVE=y
# CONFIG_GPIO_SNPS_CREG is not set
CONFIG_GPIO_SPRD=m
# CONFIG_GPIO_STP_XWAY is not set
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TEGRA=m
# CONFIG_GPIO_TEGRA186 is not set
CONFIG_GPIO_TS4800=y
CONFIG_GPIO_UNIPHIER=y
# CONFIG_GPIO_VISCONTI is not set
# CONFIG_GPIO_WCD934X is not set
CONFIG_GPIO_XGENE_SB=m
# CONFIG_GPIO_XILINX is not set
CONFIG_GPIO_XLP=m
CONFIG_GPIO_AMD_FCH=m
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
CONFIG_GPIO_ADNP=m
# CONFIG_GPIO_GW_PLD is not set
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
CONFIG_GPIO_PCF857X=m
# CONFIG_GPIO_TPIC2810 is not set
CONFIG_GPIO_TS4900=y
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_BD71815=m
CONFIG_GPIO_BD71828=y
# CONFIG_GPIO_BD9571MWV is not set
CONFIG_GPIO_DA9055=y
# CONFIG_GPIO_KEMPLD is not set
# CONFIG_GPIO_LP873X is not set
CONFIG_GPIO_LP87565=m
CONFIG_GPIO_MADERA=m
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_PALMAS=y
# CONFIG_GPIO_SL28CPLD is not set
# CONFIG_GPIO_STMPE is not set
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65086=m
# CONFIG_GPIO_TPS65218 is not set
# CONFIG_GPIO_TPS6586X is not set
# CONFIG_GPIO_TPS65910 is not set
CONFIG_GPIO_TQMX86=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_WM831X=m
CONFIG_GPIO_WM8994=m
# end of MFD GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_MXC=m
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=m
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2405 is not set
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
# CONFIG_W1_SLAVE_DS2406 is not set
CONFIG_W1_SLAVE_DS2423=m
# CONFIG_W1_SLAVE_DS2805 is not set
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=m
# CONFIG_W1_SLAVE_DS250X is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=m
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves

# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=y
# CONFIG_IP5XXX_POWER is not set
# CONFIG_WM831X_BACKUP is not set
CONFIG_WM831X_POWER=y
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_88PM860X=m
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=m
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=m
CONFIG_MANAGER_SBS=m
# CONFIG_BATTERY_BQ27XXX is not set
CONFIG_BATTERY_DA9150=m
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=m
# CONFIG_BATTERY_MAX1721X is not set
CONFIG_CHARGER_88PM860X=m
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_LT3651=m
# CONFIG_CHARGER_LTC4162L is not set
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_DETECTOR_MAX14656=y
# CONFIG_CHARGER_MAX77976 is not set
CONFIG_CHARGER_MT6360=m
CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=m
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
CONFIG_CHARGER_SMB347=m
CONFIG_CHARGER_TPS65090=y
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=m
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_SC2731 is not set
# CONFIG_CHARGER_UCS1002 is not set
CONFIG_CHARGER_BD99954=y
# CONFIG_BATTERY_ACER_A500 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_AHT10=y
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=m
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=y
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_BT1_PVT is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
CONFIG_SENSORS_CORSAIR_PSU=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DA9055=m
CONFIG_SENSORS_SPARX5=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_GSC=m
CONFIG_SENSORS_MC13783_ADC=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_FTSTEUTATES=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=m
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LOCHNAGAR=m
CONFIG_SENSORS_LTC2945=y
# CONFIG_SENSORS_LTC2947_I2C is not set
CONFIG_SENSORS_LTC2990=m
CONFIG_SENSORS_LTC2992=m
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX127=m
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX31730=m
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=y
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
CONFIG_SENSORS_TPS23861=y
CONFIG_SENSORS_MR75203=y
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
CONFIG_SENSORS_NPCM7XX=y
# CONFIG_SENSORS_NSA320 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_OCC_P9_SBE is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1266 is not set
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_BEL_PFE=m
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
CONFIG_SENSORS_FSP_3Y=m
CONFIG_SENSORS_IBM_CFFPS=m
# CONFIG_SENSORS_DPS920AB is not set
CONFIG_SENSORS_INSPUR_IPSPS=m
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
CONFIG_SENSORS_IR38064=m
# CONFIG_SENSORS_IR38064_REGULATOR is not set
# CONFIG_SENSORS_IRPS5401 is not set
CONFIG_SENSORS_ISL68137=m
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LM25066_REGULATOR is not set
# CONFIG_SENSORS_LT7182S is not set
# CONFIG_SENSORS_LTC2978 is not set
CONFIG_SENSORS_LTC3815=m
CONFIG_SENSORS_MAX15301=m
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
CONFIG_SENSORS_MAX20751=m
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2888 is not set
CONFIG_SENSORS_MP2975=m
# CONFIG_SENSORS_MP5023 is not set
# CONFIG_SENSORS_PIM4328 is not set
# CONFIG_SENSORS_PLI1209BC is not set
CONFIG_SENSORS_PM6764TR=m
# CONFIG_SENSORS_PXE1610 is not set
CONFIG_SENSORS_Q54SJ108A2=m
# CONFIG_SENSORS_STPDDC60 is not set
CONFIG_SENSORS_TPS40422=m
# CONFIG_SENSORS_TPS53679 is not set
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_XDPE152 is not set
CONFIG_SENSORS_XDPE122=m
# CONFIG_SENSORS_XDPE122_REGULATOR is not set
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
CONFIG_SENSORS_SL28CPLD=y
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
CONFIG_SENSORS_SHT4x=y
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SY7636A is not set
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=m
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
CONFIG_SENSORS_INA3221=y
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP464 is not set
CONFIG_SENSORS_TMP513=y
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=y
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_WM831X=m
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=m
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_DA9052_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=m
CONFIG_DA9063_WATCHDOG=m
CONFIG_DA9062_WATCHDOG=m
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
CONFIG_MENF21BMC_WATCHDOG=m
CONFIG_WM831X_WATCHDOG=y
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
CONFIG_SL28CPLD_WATCHDOG=y
# CONFIG_ARMADA_37XX_WATCHDOG is not set
CONFIG_ASM9260_WATCHDOG=y
# CONFIG_AT91RM9200_WATCHDOG is not set
# CONFIG_AT91SAM9X_WATCHDOG is not set
# CONFIG_SAMA5D4_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
CONFIG_FTWDT010_WATCHDOG=m
# CONFIG_S3C2410_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_EP93XX_WATCHDOG=y
# CONFIG_OMAP_WATCHDOG is not set
# CONFIG_PNX4008_WATCHDOG is not set
CONFIG_DAVINCI_WATCHDOG=m
CONFIG_K3_RTI_WATCHDOG=m
CONFIG_RN5T618_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_NPCM7XX_WATCHDOG=m
CONFIG_STMP3XXX_RTC_WATCHDOG=m
# CONFIG_TS4800_WATCHDOG is not set
CONFIG_TS72XX_WATCHDOG=y
CONFIG_MAX63XX_WATCHDOG=m
CONFIG_MAX77620_WATCHDOG=m
# CONFIG_IMX2_WDT is not set
CONFIG_IMX7ULP_WDT=y
CONFIG_RETU_WATCHDOG=m
CONFIG_MOXART_WDT=y
CONFIG_ST_LPC_WATCHDOG=m
CONFIG_TEGRA_WATCHDOG=y
CONFIG_QCOM_WDT=y
# CONFIG_MESON_GXBB_WATCHDOG is not set
# CONFIG_MESON_WATCHDOG is not set
# CONFIG_MEDIATEK_WATCHDOG is not set
# CONFIG_DIGICOLOR_WATCHDOG is not set
CONFIG_LPC18XX_WATCHDOG=m
CONFIG_RENESAS_WDT=m
# CONFIG_RENESAS_RZAWDT is not set
# CONFIG_RENESAS_RZN1WDT is not set
# CONFIG_RENESAS_RZG2LWDT is not set
CONFIG_ASPEED_WATCHDOG=y
CONFIG_STPMIC1_WATCHDOG=m
CONFIG_UNIPHIER_WATCHDOG=m
CONFIG_RTD119X_WATCHDOG=y
# CONFIG_REALTEK_OTTO_WDT is not set
CONFIG_SPRD_WATCHDOG=m
CONFIG_PM8916_WATCHDOG=m
# CONFIG_VISCONTI_WATCHDOG is not set
CONFIG_MSC313E_WATCHDOG=y
# CONFIG_APPLE_WATCHDOG is not set
# CONFIG_SUNPLUS_WATCHDOG is not set
CONFIG_SC520_WDT=y
# CONFIG_KEMPLD_WDT is not set
CONFIG_BCM47XX_WDT=y
CONFIG_BCM2835_WDT=y
CONFIG_BCM_KONA_WDT=y
CONFIG_BCM_KONA_WDT_DEBUG=y
# CONFIG_BCM7038_WDT is not set
CONFIG_IMGPDC_WDT=m
CONFIG_MPC5200_WDT=y
# CONFIG_BOOKE_WDT is not set
# CONFIG_MEN_A21_WDT is not set
# CONFIG_UML_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AS3711 is not set
CONFIG_MFD_AS3722=m
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_AT91_USART=m
CONFIG_MFD_ATMEL_FLEXCOM=m
# CONFIG_MFD_ATMEL_HLCDC is not set
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_BD9571MWV=m
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
# CONFIG_MFD_CROS_EC_DEV is not set
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=m
CONFIG_MFD_CS47L15=y
# CONFIG_MFD_CS47L35 is not set
CONFIG_MFD_CS47L85=y
# CONFIG_MFD_CS47L90 is not set
# CONFIG_MFD_CS47L92 is not set
CONFIG_MFD_ASIC3=y
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=m
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=m
CONFIG_MFD_ENE_KB3930=m
CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_GATEWORKS_GSC=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
# CONFIG_MFD_MP2629 is not set
CONFIG_MFD_MXS_LRADC=y
# CONFIG_MFD_MX25_TSADC is not set
CONFIG_MFD_HI6421_PMIC=y
# CONFIG_MFD_HI6421_SPMI is not set
CONFIG_MFD_HI655X_PMIC=m
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
# CONFIG_MFD_IQS62X is not set
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=m
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=m
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77650 is not set
CONFIG_MFD_MAX77686=m
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
CONFIG_MFD_MAX77843=y
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=m
CONFIG_MFD_MT6397=y
# CONFIG_MFD_MENF21BMC is not set
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_MFD_PM8XXX=m
CONFIG_MFD_SPMI_PMIC=m
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_RK808=y
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=m
# CONFIG_MFD_SIMPLE_MFD_I2C is not set
# CONFIG_MFD_SL28CPLD is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
# end of STMicroelectronics STMPE Interface Drivers

CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=m
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=m
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TI_LP87565=m
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=y
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA=m
CONFIG_MFD_ARIZONA_I2C=m
CONFIG_MFD_CS47L24=y
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=m
CONFIG_MFD_STW481X=y
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_ROHM_BD71828=y
# CONFIG_MFD_ROHM_BD957XMUF is not set
CONFIG_MFD_STM32_LPTIMER=y
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_STPMIC1=m
CONFIG_MFD_STMFX=m
CONFIG_MFD_WCD934X=m
CONFIG_MFD_ATC260X=m
CONFIG_MFD_ATC260X_I2C=m
# CONFIG_MFD_KHADAS_MCU is not set
CONFIG_MFD_ACER_A500_EC=y
CONFIG_MFD_QCOM_PM8008=y
# CONFIG_RAVE_SP_CORE is not set
CONFIG_MFD_RSMU_I2C=y
# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM800=m
CONFIG_REGULATOR_88PM8607=m
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_ANATOP=m
# CONFIG_REGULATOR_AS3722 is not set
# CONFIG_REGULATOR_ATC260X is not set
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_BCM590XX=m
# CONFIG_REGULATOR_BD71815 is not set
CONFIG_REGULATOR_BD71828=m
# CONFIG_REGULATOR_BD718XX is not set
CONFIG_REGULATOR_BD9571MWV=m
# CONFIG_REGULATOR_CROS_EC is not set
CONFIG_REGULATOR_DA9055=m
# CONFIG_REGULATOR_DA9062 is not set
CONFIG_REGULATOR_DA9121=m
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_FAN53880=m
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_HI6421 is not set
CONFIG_REGULATOR_HI6421V530=y
# CONFIG_REGULATOR_HI655X is not set
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_LOCHNAGAR is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=m
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_LP87565 is not set
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=y
# CONFIG_REGULATOR_MAX14577 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX77620 is not set
CONFIG_REGULATOR_MAX77650=y
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8893=m
CONFIG_REGULATOR_MAX8907=m
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX20086 is not set
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=m
# CONFIG_REGULATOR_MAX77826 is not set
CONFIG_REGULATOR_MC13XXX_CORE=m
# CONFIG_REGULATOR_MC13783 is not set
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MCP16502=m
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=m
# CONFIG_REGULATOR_MP886X is not set
# CONFIG_REGULATOR_MPQ7920 is not set
# CONFIG_REGULATOR_MT6311 is not set
CONFIG_REGULATOR_MT6315=m
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6358=y
CONFIG_REGULATOR_MT6359=y
CONFIG_REGULATOR_MT6360=m
CONFIG_REGULATOR_MT6380=m
# CONFIG_REGULATOR_MT6397 is not set
# CONFIG_REGULATOR_PALMAS is not set
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PCA9450=m
CONFIG_REGULATOR_PF8X00=m
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=m
# CONFIG_REGULATOR_PV88080 is not set
CONFIG_REGULATOR_PV88090=y
# CONFIG_REGULATOR_PWM is not set
CONFIG_REGULATOR_QCOM_RPMH=m
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=m
# CONFIG_REGULATOR_RK808 is not set
CONFIG_REGULATOR_ROHM=m
# CONFIG_REGULATOR_RT4801 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
# CONFIG_REGULATOR_RT6160 is not set
CONFIG_REGULATOR_RT6245=y
# CONFIG_REGULATOR_RTQ2134 is not set
# CONFIG_REGULATOR_RTMV20 is not set
CONFIG_REGULATOR_RTQ6752=y
CONFIG_REGULATOR_S2MPA01=y
# CONFIG_REGULATOR_S2MPS11 is not set
CONFIG_REGULATOR_S5M8767=y
# CONFIG_REGULATOR_SC2731 is not set
CONFIG_REGULATOR_SLG51000=y
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
CONFIG_REGULATOR_STM32_PWR=y
# CONFIG_REGULATOR_STPMIC1 is not set
# CONFIG_REGULATOR_TI_ABB is not set
CONFIG_REGULATOR_STW481X_VMMC=y
# CONFIG_REGULATOR_SY7636A is not set
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
# CONFIG_REGULATOR_SY8827N is not set
CONFIG_REGULATOR_TPS51632=m
# CONFIG_REGULATOR_TPS6105X is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS6286X is not set
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS65086 is not set
CONFIG_REGULATOR_TPS65090=y
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS65218=y
# CONFIG_REGULATOR_TPS6586X is not set
CONFIG_REGULATOR_TPS65910=m
# CONFIG_REGULATOR_TPS68470 is not set
CONFIG_REGULATOR_UNIPHIER=m
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM831X=m
CONFIG_REGULATOR_WM8994=m
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_RC_CORE=m
CONFIG_LIRC=y
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
# CONFIG_IR_IMON_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_NEC_DECODER=m
# CONFIG_IR_RC5_DECODER is not set
CONFIG_IR_RC6_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_IR_SANYO_DECODER=m
# CONFIG_IR_SHARP_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=m
CONFIG_IR_FINTEK=m
# CONFIG_IR_GPIO_CIR is not set
CONFIG_IR_GPIO_TX=m
CONFIG_IR_HIX5HD2=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_MESON=m
CONFIG_IR_MESON_TX=m
CONFIG_IR_MTK=m
# CONFIG_IR_NUVOTON is not set
CONFIG_IR_PWM_TX=m
# CONFIG_IR_RX51 is not set
# CONFIG_IR_SERIAL is not set
CONFIG_IR_SUNXI=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_RC_LOOPBACK=m
# CONFIG_RC_ST is not set
# CONFIG_IR_IMG is not set
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y

#
# CEC support
#
CONFIG_CEC_PIN_ERROR_INJ=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=m
CONFIG_CEC_CROS_EC=y
CONFIG_CEC_MESON_AO=y
CONFIG_CEC_MESON_G12A_AO=y
CONFIG_CEC_GPIO=y
CONFIG_CEC_SAMSUNG_S5P=y
# CONFIG_CEC_STI is not set
CONFIG_CEC_STM32=y
# CONFIG_CEC_TEGRA is not set
# end of CEC support

CONFIG_MEDIA_SUPPORT=y
# CONFIG_MEDIA_SUPPORT_FILTER is not set
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

#
# Media core support
#
CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=y
# end of Media core support

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_V4L2_H264=y
CONFIG_V4L2_VP9=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
# end of Video4Linux options

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options

#
# Digital TV options
#
CONFIG_DVB_MMAP=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
CONFIG_DVB_ULE_DEBUG=y
# end of Digital TV options

#
# Media drivers
#

#
# Media drivers
#
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_MEDIA_PLATFORM_DRIVERS=y
# CONFIG_V4L_PLATFORM_DRIVERS is not set
CONFIG_SDR_PLATFORM_DRIVERS=y
# CONFIG_DVB_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set

#
# Allegro DVT media platform drivers
#

#
# Amlogic media platform drivers
#

#
# Amphion drivers
#

#
# Aspeed media platform drivers
#

#
# Atmel media platform drivers
#

#
# Cadence media platform drivers
#
# CONFIG_VIDEO_CADENCE_CSI2RX is not set
# CONFIG_VIDEO_CADENCE_CSI2TX is not set

#
# Chips&Media media platform drivers
#

#
# Intel media platform drivers
#

#
# Marvell media platform drivers
#

#
# Mediatek media platform drivers
#

#
# NVidia media platform drivers
#

#
# NXP media platform drivers
#
# CONFIG_VIDEO_IMX_MIPI_CSIS is not set

#
# Qualcomm media platform drivers
#

#
# Renesas media platform drivers
#
CONFIG_VIDEO_RCAR_DRIF=y

#
# Rockchip media platform drivers
#

#
# Samsung media platform drivers
#

#
# STMicroelectronics media platform drivers
#

#
# Sunxi media platform drivers
#

#
# Texas Instruments drivers
#

#
# VIA media platform drivers
#

#
# Xilinx media platform drivers
#
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIM2M=m
CONFIG_VIDEO_VICODEC=y
CONFIG_VIDEO_VIMC=m
CONFIG_DVB_TEST_DRIVERS=y
CONFIG_DVB_VIDTV=y

#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_VIDEO_V4L2_TPG=m
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=y
CONFIG_VIDEO_CCS_PLL=m
# CONFIG_VIDEO_AR0521 is not set
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_HI846 is not set
# CONFIG_VIDEO_HI847 is not set
# CONFIG_VIDEO_IMX208 is not set
CONFIG_VIDEO_IMX214=y
CONFIG_VIDEO_IMX219=m
# CONFIG_VIDEO_IMX258 is not set
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
CONFIG_VIDEO_IMX319=y
# CONFIG_VIDEO_IMX334 is not set
# CONFIG_VIDEO_IMX335 is not set
CONFIG_VIDEO_IMX355=m
CONFIG_VIDEO_IMX412=m
CONFIG_VIDEO_MAX9271_LIB=y
# CONFIG_VIDEO_MT9M001 is not set
CONFIG_VIDEO_MT9M032=y
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9T112 is not set
# CONFIG_VIDEO_MT9V011 is not set
CONFIG_VIDEO_MT9V032=y
CONFIG_VIDEO_MT9V111=m
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_OG01A1B is not set
CONFIG_VIDEO_OV02A10=m
# CONFIG_VIDEO_OV08D10 is not set
CONFIG_VIDEO_OV13858=m
# CONFIG_VIDEO_OV13B10 is not set
# CONFIG_VIDEO_OV2640 is not set
CONFIG_VIDEO_OV2659=m
# CONFIG_VIDEO_OV2680 is not set
CONFIG_VIDEO_OV2685=m
CONFIG_VIDEO_OV2740=y
# CONFIG_VIDEO_OV5640 is not set
# CONFIG_VIDEO_OV5645 is not set
CONFIG_VIDEO_OV5647=m
CONFIG_VIDEO_OV5648=y
CONFIG_VIDEO_OV5670=m
CONFIG_VIDEO_OV5675=y
# CONFIG_VIDEO_OV5693 is not set
CONFIG_VIDEO_OV5695=y
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV7251 is not set
CONFIG_VIDEO_OV7640=m
# CONFIG_VIDEO_OV7670 is not set
CONFIG_VIDEO_OV772X=y
# CONFIG_VIDEO_OV7740 is not set
CONFIG_VIDEO_OV8856=y
# CONFIG_VIDEO_OV8865 is not set
CONFIG_VIDEO_OV9282=m
CONFIG_VIDEO_OV9640=m
CONFIG_VIDEO_OV9650=y
CONFIG_VIDEO_OV9734=m
CONFIG_VIDEO_RDACM20=y
# CONFIG_VIDEO_RDACM21 is not set
CONFIG_VIDEO_RJ54N1=m
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
CONFIG_VIDEO_S5K6A3=m
# CONFIG_VIDEO_S5K6AA is not set
CONFIG_VIDEO_SR030PC30=y
CONFIG_VIDEO_VS6624=y
CONFIG_VIDEO_CCS=m
# CONFIG_VIDEO_ET8EK8 is not set
CONFIG_VIDEO_M5MOLS=m
# end of Camera sensor devices

#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
CONFIG_VIDEO_AK7375=m
CONFIG_VIDEO_DW9714=y
# CONFIG_VIDEO_DW9768 is not set
CONFIG_VIDEO_DW9807_VCM=m
# end of Lens drivers

#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
CONFIG_VIDEO_LM3560=y
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=y
CONFIG_VIDEO_CS5345=y
# CONFIG_VIDEO_CS53L32A is not set
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_SONY_BTF_MPX=m
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
CONFIG_VIDEO_TEA6415C=m
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_TVAUDIO=m
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_VP27SMPX is not set
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_WM8775=m
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
# end of RDS decoders

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
CONFIG_VIDEO_ADV7183=y
CONFIG_VIDEO_ADV748X=m
CONFIG_VIDEO_ADV7604=m
CONFIG_VIDEO_ADV7604_CEC=y
CONFIG_VIDEO_ADV7842=m
# CONFIG_VIDEO_ADV7842_CEC is not set
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=m
# CONFIG_VIDEO_ISL7998X is not set
CONFIG_VIDEO_KS0127=y
# CONFIG_VIDEO_MAX9286 is not set
CONFIG_VIDEO_ML86V7667=y
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
CONFIG_VIDEO_TW9903=m
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
# CONFIG_VIDEO_CX25840 is not set
# end of Video decoders

#
# Video encoders
#
CONFIG_VIDEO_AD9389B=m
CONFIG_VIDEO_ADV7170=y
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7343=m
CONFIG_VIDEO_ADV7393=y
CONFIG_VIDEO_ADV7511=y
# CONFIG_VIDEO_ADV7511_CEC is not set
CONFIG_VIDEO_AK881X=y
# CONFIG_VIDEO_SAA7127 is not set
CONFIG_VIDEO_SAA7185=y
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
CONFIG_VIDEO_UPD64083=m
# end of Video improvement chips

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips

#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_I2C is not set
CONFIG_VIDEO_M52790=y
CONFIG_VIDEO_ST_MIPID02=m
# CONFIG_VIDEO_THS7303 is not set
# end of Miscellaneous helper chips

CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=y
CONFIG_MEDIA_TUNER_FC0011=m
# CONFIG_MEDIA_TUNER_FC0012 is not set
# CONFIG_MEDIA_TUNER_FC0013 is not set
# CONFIG_MEDIA_TUNER_FC2580 is not set
# CONFIG_MEDIA_TUNER_IT913X is not set
CONFIG_MEDIA_TUNER_M88RS6000T=m
# CONFIG_MEDIA_TUNER_MAX2165 is not set
CONFIG_MEDIA_TUNER_MC44S803=y
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2063 is not set
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_MT2266=m
# CONFIG_MEDIA_TUNER_MXL301RF is not set
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_R820T=m
# CONFIG_MEDIA_TUNER_SI2157 is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_TDA18218=y
# CONFIG_MEDIA_TUNER_TDA18250 is not set
CONFIG_MEDIA_TUNER_TDA18271=m
# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
CONFIG_MEDIA_TUNER_TDA9887=y
# CONFIG_MEDIA_TUNER_TEA5761 is not set
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_TUA9001=m
# CONFIG_MEDIA_TUNER_XC2028 is not set
CONFIG_MEDIA_TUNER_XC4000=y
# CONFIG_MEDIA_TUNER_XC5000 is not set
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_M88DS3103 is not set
CONFIG_DVB_MXL5XX=m
# CONFIG_DVB_STB0899 is not set
CONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
# CONFIG_DVB_STV0910 is not set
CONFIG_DVB_STV6110x=m
# CONFIG_DVB_STV6111 is not set

#
# Multistandard (cable + terrestrial) frontends
#
# CONFIG_DVB_DRXK is not set
# CONFIG_DVB_MN88472 is not set
# CONFIG_DVB_MN88473 is not set
CONFIG_DVB_SI2165=y
CONFIG_DVB_TDA18271C2DD=y

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24116=y
# CONFIG_DVB_CX24117 is not set
CONFIG_DVB_CX24120=m
CONFIG_DVB_CX24123=y
CONFIG_DVB_DS3000=y
CONFIG_DVB_MB86A16=y
CONFIG_DVB_MT312=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_STB6000=m
# CONFIG_DVB_STV0288 is not set
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV0900=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_TDA10071=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8083=y
# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_TDA826X is not set
CONFIG_DVB_TS2020=y
CONFIG_DVB_TUA6100=y
CONFIG_DVB_TUNER_CX24113=m
# CONFIG_DVB_TUNER_ITD1000 is not set
CONFIG_DVB_VES1X93=y
CONFIG_DVB_ZL10036=y
# CONFIG_DVB_ZL10039 is not set

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=y
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
# CONFIG_DVB_DIB3000MB is not set
CONFIG_DVB_DIB3000MC=m
# CONFIG_DVB_DIB7000M is not set
CONFIG_DVB_DIB7000P=y
# CONFIG_DVB_DIB9000 is not set
# CONFIG_DVB_DRXD is not set
CONFIG_DVB_EC100=m
CONFIG_DVB_L64781=m
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_NXT6000 is not set
CONFIG_DVB_RTL2830=m
# CONFIG_DVB_RTL2832 is not set
CONFIG_DVB_S5H1432=y
CONFIG_DVB_SI2168=m
# CONFIG_DVB_SP887X is not set
CONFIG_DVB_STV0367=m
# CONFIG_DVB_TDA10048 is not set
# CONFIG_DVB_TDA1004X is not set
CONFIG_DVB_ZD1301_DEMOD=y
# CONFIG_DVB_ZL10353 is not set

#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=m
# CONFIG_DVB_TDA10021 is not set
CONFIG_DVB_TDA10023=y
# CONFIG_DVB_VES1820 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
# CONFIG_DVB_AU8522_V4L is not set
# CONFIG_DVB_BCM3510 is not set
CONFIG_DVB_LG2160=y
CONFIG_DVB_LGDT3305=m
# CONFIG_DVB_LGDT3306A is not set
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_MXL692=y
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_OR51211=m
CONFIG_DVB_S5H1409=m
# CONFIG_DVB_S5H1411 is not set

#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_DIB8000 is not set
CONFIG_DVB_MB86A20S=y
CONFIG_DVB_S921=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=m
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
# CONFIG_DVB_TUNER_DIB0070 is not set
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
# CONFIG_DVB_A8293 is not set
CONFIG_DVB_AF9033=m
# CONFIG_DVB_ASCOT2E is not set
CONFIG_DVB_ATBM8830=m
# CONFIG_DVB_HELENE is not set
# CONFIG_DVB_HORUS3A is not set
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
# CONFIG_DVB_ISL6423 is not set
CONFIG_DVB_IX2505V=m
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=y
# CONFIG_DVB_LNBH25 is not set
CONFIG_DVB_LNBH29=m
# CONFIG_DVB_LNBP21 is not set
CONFIG_DVB_LNBP22=y
# CONFIG_DVB_M88RS2000 is not set
# CONFIG_DVB_TDA665x is not set
CONFIG_DVB_DRX39XYJ=y

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
# CONFIG_DVB_SP2 is not set
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_IMX_IPUV3_CORE=m
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_DEBUG_SELFTEST=y
CONFIG_DRM_KUNIT_TEST=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_BUDDY=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# CONFIG_DRM_HDLCD is not set
CONFIG_DRM_MALI_DISPLAY=y
CONFIG_DRM_KOMEDA=y
# end of ARM devices

CONFIG_DRM_KMB_DISPLAY=m
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
# CONFIG_DRM_EXYNOS is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_USE_LVDS is not set
# CONFIG_DRM_RCAR_MIPI_DSI is not set
# CONFIG_DRM_SUN4I is not set
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_PANEL_ARM_VERSATILE=y
# CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
# CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0 is not set
# CONFIG_DRM_PANEL_BOE_HIMAX8279D is not set
# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set
CONFIG_DRM_PANEL_DSI_CM=m
CONFIG_DRM_PANEL_LVDS=m
CONFIG_DRM_PANEL_SIMPLE=m
# CONFIG_DRM_PANEL_EDP is not set
# CONFIG_DRM_PANEL_EBBG_FT8719 is not set
CONFIG_DRM_PANEL_ELIDA_KD35T133=m
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=m
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=m
CONFIG_DRM_PANEL_ILITEK_ILI9881C=m
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=m
CONFIG_DRM_PANEL_JDI_LT070ME05000=m
# CONFIG_DRM_PANEL_JDI_R63452 is not set
CONFIG_DRM_PANEL_KHADAS_TS050=m
# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set
# CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W is not set
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=m
CONFIG_DRM_PANEL_NOVATEK_NT35510=m
# CONFIG_DRM_PANEL_NOVATEK_NT35560 is not set
# CONFIG_DRM_PANEL_NOVATEK_NT35950 is not set
CONFIG_DRM_PANEL_NOVATEK_NT36672A=m
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=m
# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=m
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=m
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=m
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
# CONFIG_DRM_PANEL_SAMSUNG_SOFEF00 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
# CONFIG_DRM_PANEL_SHARP_LS060T1SX01 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
CONFIG_DRM_PANEL_SITRONIX_ST7703=m
# CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521 is not set
# CONFIG_DRM_PANEL_TDO_TL070WSH30 is not set
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y
CONFIG_DRM_PANEL_VISIONOX_RM69299=m
CONFIG_DRM_PANEL_XINPENG_XPP055C272=m
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=y
CONFIG_DRM_CHIPONE_ICN6211=y
# CONFIG_DRM_CHRONTEL_CH7033 is not set
CONFIG_DRM_CROS_EC_ANX7688=m
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_FSL_LDB is not set
# CONFIG_DRM_ITE_IT6505 is not set
CONFIG_DRM_LONTIUM_LT8912B=m
# CONFIG_DRM_LONTIUM_LT9211 is not set
CONFIG_DRM_LONTIUM_LT9611=m
CONFIG_DRM_LONTIUM_LT9611UXC=y
# CONFIG_DRM_ITE_IT66121 is not set
CONFIG_DRM_LVDS_CODEC=m
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y
CONFIG_DRM_NWL_MIPI_DSI=y
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
CONFIG_DRM_PARADE_PS8640=m
# CONFIG_DRM_SIL_SII8620 is not set
CONFIG_DRM_SII902X=m
CONFIG_DRM_SII9234=m
CONFIG_DRM_SIMPLE_BRIDGE=m
CONFIG_DRM_THINE_THC63LVD1024=y
# CONFIG_DRM_TOSHIBA_TC358762 is not set
CONFIG_DRM_TOSHIBA_TC358764=m
CONFIG_DRM_TOSHIBA_TC358767=y
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_DLPC3433 is not set
CONFIG_DRM_TI_TFP410=y
# CONFIG_DRM_TI_SN65DSI83 is not set
CONFIG_DRM_TI_SN65DSI86=y
CONFIG_DRM_TI_TPD12S015=m
CONFIG_DRM_ANALOGIX_ANX6345=y
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
CONFIG_DRM_ANALOGIX_DP=y
CONFIG_DRM_ANALOGIX_ANX7625=m
CONFIG_DRM_I2C_ADV7511=y
# CONFIG_DRM_I2C_ADV7511_CEC is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# CONFIG_DRM_IMX8QM_LDB is not set
# CONFIG_DRM_IMX8QXP_LDB is not set
# CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set
# CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI is not set
# end of Display Interface Bridges

CONFIG_DRM_IMX=m
CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
CONFIG_DRM_IMX_TVE=m
CONFIG_DRM_IMX_LDB=m
# CONFIG_DRM_IMX_HDMI is not set
# CONFIG_DRM_INGENIC is not set
CONFIG_DRM_V3D=m
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_LOGICVC is not set
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=m
# CONFIG_DRM_IMX_LCDIF is not set
CONFIG_DRM_ARCPGU=m
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_PL111 is not set
CONFIG_DRM_TVE200=y
CONFIG_DRM_LIMA=m
CONFIG_DRM_ASPEED_GFX=y
# CONFIG_DRM_MCDE is not set
CONFIG_DRM_TIDSS=m
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_SPRD is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_EXPORT_FOR_TESTS=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_LIB_RANDOM=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
# CONFIG_FB is not set
CONFIG_FB_OMAP_LCD_H3=y
CONFIG_MMP_DISP=m
CONFIG_MMP_DISP_CONTROLLER=y
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_KTD253=m
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_QCOM_WLED=m
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
# CONFIG_BACKLIGHT_LP855X is not set
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=m
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_BACKLIGHT_LED=m
# end of Backlight & LCD device support

CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
# CONFIG_HID_APPLE is not set
CONFIG_HID_AUREAL=m
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_COUGAR=m
CONFIG_HID_MACALLY=m
CONFIG_HID_CMEDIA=m
# CONFIG_HID_CYPRESS is not set
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
CONFIG_HID_VIVALDI_COMMON=m
CONFIG_HID_VIVALDI=m
CONFIG_HID_KEYTOUCH=m
# CONFIG_HID_KYE is not set
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MALTRON=m
CONFIG_HID_MAYFLASH=m
CONFIG_HID_REDRAGON=m
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NINTENDO is not set
CONFIG_HID_NTI=m
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_BACKLIGHT=y
# CONFIG_HID_PICOLCD_LCD is not set
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PLAYSTATION=m
# CONFIG_PLAYSTATION_FF is not set
# CONFIG_HID_RAZER is not set
CONFIG_HID_PRIMAX=m
CONFIG_HID_SAITEK=m
# CONFIG_HID_SEMITEK is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
# CONFIG_HID_GREENASIA is not set
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
# CONFIG_HID_THINGM is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
# end of Special HID drivers

#
# I2C HID support
#
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_ELAN is not set
CONFIG_I2C_HID_OF_GOODIX=m
# end of I2C HID support

CONFIG_I2C_HID_CORE=m
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set
CONFIG_MS_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=m
CONFIG_LEDS_AN30259A=m
CONFIG_LEDS_ARIEL=m
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
CONFIG_LEDS_BCM6358=m
CONFIG_LEDS_TURRIS_OMNIA=m
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=m
CONFIG_LEDS_LM3642=m
# CONFIG_LEDS_LM3692X is not set
CONFIG_LEDS_MT6323=m
CONFIG_LEDS_S3C24XX=m
CONFIG_LEDS_COBALT_QUBE=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
# CONFIG_LEDS_LP50XX is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
CONFIG_LEDS_LP8860=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_WM831X_STATUS is not set
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_MC13783=m
# CONFIG_LEDS_NS2 is not set
CONFIG_LEDS_NETXBIG=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=m
CONFIG_LEDS_IS31FL319X=m
CONFIG_LEDS_IS31FL32XX=m

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_PM8058=m
CONFIG_LEDS_MLXREG=m
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM3697=m
# CONFIG_LEDS_TPS6105X is not set
CONFIG_LEDS_IP30=m
CONFIG_LEDS_ACER_A500=m
# CONFIG_LEDS_BCM63138 is not set
CONFIG_LEDS_LGM=m

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#
# CONFIG_LEDS_PWM_MULTICOLOR is not set
# CONFIG_LEDS_QCOM_LPG is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=m
CONFIG_LEDS_TRIGGER_GPIO=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
CONFIG_LEDS_TRIGGER_PATTERN=m
CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_LEDS_TRIGGER_TTY=m

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y

#
# Speakup console speech
#
# end of Speakup console speech

CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=m
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_AL_MC is not set
# CONFIG_EDAC_XGENE is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_LIB_KUNIT_TEST=y
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABEOZ9=m
CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_BRCMSTB=m
CONFIG_RTC_DRV_AS3722=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8907=m
CONFIG_RTC_DRV_MAX77686=m
# CONFIG_RTC_DRV_NCT3018Y is not set
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_ISL12026=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_PCF85363=y
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_BD70528=y
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TPS6586X=m
CONFIG_RTC_DRV_TPS65910=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=m
# CONFIG_RTC_DRV_RX8025 is not set
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3028=m
# CONFIG_RTC_DRV_RV3032 is not set
CONFIG_RTC_DRV_RV8803=y
# CONFIG_RTC_DRV_S5M is not set
CONFIG_RTC_DRV_SD3078=y

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_DS3232_HWMON is not set
CONFIG_RTC_DRV_PCF2127=m
# CONFIG_RTC_DRV_RV3029C2 is not set
CONFIG_RTC_DRV_RX6110=m

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
CONFIG_RTC_DRV_DS1511=y
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_DS2404=m
# CONFIG_RTC_DRV_DA9055 is not set
# CONFIG_RTC_DRV_DA9063 is not set
CONFIG_RTC_DRV_STK17TA8=y
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
# CONFIG_RTC_DRV_GAMECUBE is not set
CONFIG_RTC_DRV_WM831X=y
CONFIG_RTC_DRV_SC27XX=y
CONFIG_RTC_DRV_SPEAR=m
CONFIG_RTC_DRV_ZYNQMP=y
# CONFIG_RTC_DRV_CROS_EC is not set
# CONFIG_RTC_DRV_NTXEC is not set

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_ASM9260=y
# CONFIG_RTC_DRV_DAVINCI is not set
# CONFIG_RTC_DRV_DIGICOLOR is not set
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
CONFIG_RTC_DRV_MESON=m
CONFIG_RTC_DRV_MESON_VRTC=y
CONFIG_RTC_DRV_OMAP=m
CONFIG_RTC_DRV_S3C=m
CONFIG_RTC_DRV_EP93XX=m
CONFIG_RTC_DRV_AT91RM9200=m
# CONFIG_RTC_DRV_AT91SAM9 is not set
# CONFIG_RTC_DRV_RZN1 is not set
# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_RTC_DRV_VT8500=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_MV=m
CONFIG_RTC_DRV_ARMADA38X=m
CONFIG_RTC_DRV_CADENCE=m
# CONFIG_RTC_DRV_FTRTC010 is not set
CONFIG_RTC_DRV_STMP=m
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_RTC_DRV_JZ4740=m
CONFIG_RTC_DRV_LPC24XX=m
# CONFIG_RTC_DRV_LPC32XX is not set
CONFIG_RTC_DRV_PM8XXX=y
# CONFIG_RTC_DRV_TEGRA is not set
CONFIG_RTC_DRV_MXC=m
CONFIG_RTC_DRV_MXC_V2=y
# CONFIG_RTC_DRV_SNVS is not set
CONFIG_RTC_DRV_MOXART=m
CONFIG_RTC_DRV_MT2712=m
# CONFIG_RTC_DRV_MT6397 is not set
CONFIG_RTC_DRV_MT7622=y
CONFIG_RTC_DRV_XGENE=m
# CONFIG_RTC_DRV_R7301 is not set
CONFIG_RTC_DRV_STM32=m
CONFIG_RTC_DRV_RTD119X=y
# CONFIG_RTC_DRV_ASPEED is not set
# CONFIG_RTC_DRV_TI_K3 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_RTC_DRV_MSC313 is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
CONFIG_DMABUF_DEBUG=y
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
CONFIG_DMABUF_SYSFS_STATS=y
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
# CONFIG_UIO is not set
CONFIG_VFIO=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PLATFORM=m
CONFIG_VFIO_AMBA=m
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=m
CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=m
CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET=m
CONFIG_VFIO_MDEV=m
CONFIG_VFIO_FSL_MC=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not set
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

CONFIG_GREYBUS=y
CONFIG_COMEDI=y
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
# CONFIG_COMEDI_BOND is not set
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
# CONFIG_COMEDI_SSV_DNP is not set
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
# CONFIG_COMEDI_PCL724 is not set
CONFIG_COMEDI_PCL726=y
# CONFIG_COMEDI_PCL730 is not set
CONFIG_COMEDI_PCL812=y
CONFIG_COMEDI_PCL816=m
CONFIG_COMEDI_PCL818=m
# CONFIG_COMEDI_PCM3724 is not set
CONFIG_COMEDI_AMPLC_DIO200_ISA=y
CONFIG_COMEDI_AMPLC_PC236_ISA=y
CONFIG_COMEDI_AMPLC_PC263_ISA=y
CONFIG_COMEDI_RTI800=m
# CONFIG_COMEDI_RTI802 is not set
CONFIG_COMEDI_DAC02=m
# CONFIG_COMEDI_DAS16M1 is not set
CONFIG_COMEDI_DAS08_ISA=y
CONFIG_COMEDI_DAS16=m
CONFIG_COMEDI_DAS800=y
CONFIG_COMEDI_DAS1800=m
CONFIG_COMEDI_DAS6402=y
CONFIG_COMEDI_DT2801=m
CONFIG_COMEDI_DT2811=m
# CONFIG_COMEDI_DT2814 is not set
CONFIG_COMEDI_DT2815=y
CONFIG_COMEDI_DT2817=y
CONFIG_COMEDI_DT282X=m
CONFIG_COMEDI_DMM32AT=m
# CONFIG_COMEDI_FL512 is not set
CONFIG_COMEDI_AIO_AIO12_8=y
CONFIG_COMEDI_AIO_IIRO_16=y
# CONFIG_COMEDI_II_PCI20KC is not set
CONFIG_COMEDI_C6XDIGIO=m
# CONFIG_COMEDI_MPC624 is not set
CONFIG_COMEDI_ADQ12B=m
CONFIG_COMEDI_NI_AT_A2150=m
CONFIG_COMEDI_NI_AT_AO=m
# CONFIG_COMEDI_NI_ATMIO is not set
CONFIG_COMEDI_NI_ATMIO16D=m
CONFIG_COMEDI_NI_LABPC_ISA=m
CONFIG_COMEDI_PCMAD=y
CONFIG_COMEDI_PCMDA12=y
CONFIG_COMEDI_PCMMIO=y
CONFIG_COMEDI_PCMUIO=m
CONFIG_COMEDI_MULTIQ3=y
CONFIG_COMEDI_S526=m
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
# CONFIG_COMEDI_8255_SA is not set
# CONFIG_COMEDI_KCOMEDILIB is not set
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=y
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=y
# CONFIG_COMEDI_TESTS_EXAMPLE is not set
CONFIG_COMEDI_TESTS_NI_ROUTES=y
CONFIG_STAGING=y
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
# CONFIG_RTLLIB_CRYPTO_WEP is not set
CONFIG_OCTEON_ETHERNET=y
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_HANTRO=y
CONFIG_VIDEO_HANTRO_IMX8M=y
# CONFIG_VIDEO_HANTRO_SAMA5D4 is not set
CONFIG_VIDEO_HANTRO_ROCKCHIP=y
CONFIG_VIDEO_HANTRO_SUNXI=y
# CONFIG_VIDEO_IMX_MEDIA is not set
# CONFIG_VIDEO_MAX96712 is not set
CONFIG_VIDEO_MESON_VDEC=m
CONFIG_VIDEO_OMAP4=m
CONFIG_VIDEO_ROCKCHIP_VDEC=m
# CONFIG_VIDEO_SUNXI is not set
# CONFIG_STAGING_BOARD is not set
CONFIG_FIREWIRE_SERIAL=y
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
CONFIG_COMMON_CLK_XLNX_CLKWZRD=m
# CONFIG_MOST_COMPONENTS is not set
# CONFIG_GREYBUS_BOOTROM is not set
CONFIG_GREYBUS_HID=m
# CONFIG_GREYBUS_LIGHT is not set
CONFIG_GREYBUS_LOG=m
CONFIG_GREYBUS_LOOPBACK=m
CONFIG_GREYBUS_POWER=y
# CONFIG_GREYBUS_RAW is not set
# CONFIG_GREYBUS_VIBRATOR is not set
CONFIG_GREYBUS_BRIDGED_PHY=m
CONFIG_GREYBUS_GPIO=m
# CONFIG_GREYBUS_I2C is not set
CONFIG_GREYBUS_PWM=m
# CONFIG_GREYBUS_UART is not set
CONFIG_GREYBUS_ARCHE=y
CONFIG_BCM_VIDEOCORE=m
# CONFIG_BCM2835_VCHIQ is not set
# CONFIG_VIDEO_BCM2835 is not set
CONFIG_XIL_AXIS_FIFO=y
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_GOLDFISH is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC=y
# CONFIG_CROS_EC_I2C is not set
CONFIG_CROS_EC_PROTO=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
CONFIG_CROS_KUNIT=y
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_OLPC_XO175=y
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_WM831X is not set

#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs

CONFIG_CLK_HSDK=y
# CONFIG_COMMON_CLK_APPLE_NCO is not set
CONFIG_COMMON_CLK_MAX77686=m
CONFIG_COMMON_CLK_MAX9485=m
# CONFIG_COMMON_CLK_RK808 is not set
CONFIG_COMMON_CLK_HI655X=y
CONFIG_COMMON_CLK_SCMI=y
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
CONFIG_COMMON_CLK_SI570=m
CONFIG_COMMON_CLK_BM1880=y
CONFIG_COMMON_CLK_CDCE706=m
# CONFIG_COMMON_CLK_TPS68470 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
CONFIG_COMMON_CLK_S2MPS11=m
# CONFIG_CLK_TWL6040 is not set
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
CONFIG_CLK_QORIQ=y
CONFIG_CLK_LS1028A_PLLDIG=m
# CONFIG_COMMON_CLK_XGENE is not set
# CONFIG_COMMON_CLK_LOCHNAGAR is not set
# CONFIG_COMMON_CLK_PALMAS is not set
CONFIG_COMMON_CLK_PWM=m
# CONFIG_COMMON_CLK_OXNAS is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
CONFIG_COMMON_CLK_VC5=y
CONFIG_COMMON_CLK_MMP2_AUDIO=m
CONFIG_COMMON_CLK_BD718XX=y
CONFIG_COMMON_CLK_FIXED_MMIO=y
CONFIG_CLK_ACTIONS=y
# CONFIG_CLK_OWL_S500 is not set
# CONFIG_CLK_OWL_S700 is not set
CONFIG_CLK_OWL_S900=y
CONFIG_CLK_BAIKAL_T1=y
# CONFIG_CLK_BT1_CCU_PLL is not set
# CONFIG_CLK_BT1_CCU_DIV is not set
CONFIG_CLK_BCM2711_DVP=m
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
CONFIG_CLK_BCM_63XX_GATE=y
CONFIG_CLK_BCM_KONA=y
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CLK_BCM_CYGNUS=y
# CONFIG_CLK_BCM_HR2 is not set
CONFIG_CLK_BCM_NSP=y
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
CONFIG_CLK_RASPBERRYPI=m
CONFIG_COMMON_CLK_HI3516CV300=m
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
CONFIG_COMMON_CLK_HI3660=y
# CONFIG_COMMON_CLK_HI3670 is not set
CONFIG_COMMON_CLK_HI3798CV200=y
# CONFIG_COMMON_CLK_HI6220 is not set
CONFIG_RESET_HISI=y
# CONFIG_COMMON_CLK_BOSTON is not set
CONFIG_MXC_CLK=m
CONFIG_CLK_IMX8MM=m
CONFIG_CLK_IMX8MN=m
CONFIG_CLK_IMX8MP=m
CONFIG_CLK_IMX8MQ=m
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set

#
# Ingenic SoCs drivers
#
CONFIG_INGENIC_CGU_COMMON=y
# CONFIG_INGENIC_CGU_JZ4740 is not set
CONFIG_INGENIC_CGU_JZ4725B=y
# CONFIG_INGENIC_CGU_JZ4760 is not set
CONFIG_INGENIC_CGU_JZ4770=y
CONFIG_INGENIC_CGU_JZ4780=y
# CONFIG_INGENIC_CGU_X1000 is not set
CONFIG_INGENIC_CGU_X1830=y
CONFIG_INGENIC_TCU_CLK=y
# end of Ingenic SoCs drivers

CONFIG_COMMON_CLK_KEYSTONE=m
CONFIG_TI_SYSCON_CLK=m

#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
# CONFIG_COMMON_CLK_MT2701_MMSYS is not set
# CONFIG_COMMON_CLK_MT2701_IMGSYS is not set
CONFIG_COMMON_CLK_MT2701_VDECSYS=y
# CONFIG_COMMON_CLK_MT2701_HIFSYS is not set
CONFIG_COMMON_CLK_MT2701_ETHSYS=y
# CONFIG_COMMON_CLK_MT2701_BDPSYS is not set
# CONFIG_COMMON_CLK_MT2701_AUDSYS is not set
CONFIG_COMMON_CLK_MT2701_G3DSYS=y
CONFIG_COMMON_CLK_MT2712=y
# CONFIG_COMMON_CLK_MT2712_BDPSYS is not set
# CONFIG_COMMON_CLK_MT2712_IMGSYS is not set
# CONFIG_COMMON_CLK_MT2712_JPGDECSYS is not set
# CONFIG_COMMON_CLK_MT2712_MFGCFG is not set
# CONFIG_COMMON_CLK_MT2712_MMSYS is not set
CONFIG_COMMON_CLK_MT2712_VDECSYS=y
CONFIG_COMMON_CLK_MT2712_VENCSYS=y
CONFIG_COMMON_CLK_MT6765=y
# CONFIG_COMMON_CLK_MT6765_AUDIOSYS is not set
# CONFIG_COMMON_CLK_MT6765_CAMSYS is not set
# CONFIG_COMMON_CLK_MT6765_GCESYS is not set
CONFIG_COMMON_CLK_MT6765_MMSYS=y
CONFIG_COMMON_CLK_MT6765_IMGSYS=y
# CONFIG_COMMON_CLK_MT6765_VCODECSYS is not set
# CONFIG_COMMON_CLK_MT6765_MFGSYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI0ASYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI0BSYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI1ASYS is not set
# CONFIG_COMMON_CLK_MT6765_MIPI1BSYS is not set
CONFIG_COMMON_CLK_MT6765_MIPI2ASYS=y
# CONFIG_COMMON_CLK_MT6765_MIPI2BSYS is not set
CONFIG_COMMON_CLK_MT6779=y
CONFIG_COMMON_CLK_MT6779_MMSYS=y
# CONFIG_COMMON_CLK_MT6779_IMGSYS is not set
# CONFIG_COMMON_CLK_MT6779_IPESYS is not set
# CONFIG_COMMON_CLK_MT6779_CAMSYS is not set
CONFIG_COMMON_CLK_MT6779_VDECSYS=y
CONFIG_COMMON_CLK_MT6779_VENCSYS=y
# CONFIG_COMMON_CLK_MT6779_MFGCFG is not set
# CONFIG_COMMON_CLK_MT6779_AUDSYS is not set
# CONFIG_COMMON_CLK_MT6797 is not set
CONFIG_COMMON_CLK_MT7622=y
# CONFIG_COMMON_CLK_MT7622_ETHSYS is not set
CONFIG_COMMON_CLK_MT7622_HIFSYS=y
CONFIG_COMMON_CLK_MT7622_AUDSYS=y
CONFIG_COMMON_CLK_MT7629=y
CONFIG_COMMON_CLK_MT7629_ETHSYS=y
# CONFIG_COMMON_CLK_MT7629_HIFSYS is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
CONFIG_COMMON_CLK_MT8167=y
CONFIG_COMMON_CLK_MT8167_AUDSYS=y
# CONFIG_COMMON_CLK_MT8167_IMGSYS is not set
CONFIG_COMMON_CLK_MT8167_MFGCFG=y
CONFIG_COMMON_CLK_MT8167_MMSYS=y
CONFIG_COMMON_CLK_MT8167_VDECSYS=y
CONFIG_COMMON_CLK_MT8173=y
# CONFIG_COMMON_CLK_MT8173_MMSYS is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
CONFIG_COMMON_CLK_MT8192=y
CONFIG_COMMON_CLK_MT8192_AUDSYS=y
CONFIG_COMMON_CLK_MT8192_CAMSYS=y
CONFIG_COMMON_CLK_MT8192_IMGSYS=y
# CONFIG_COMMON_CLK_MT8192_IMP_IIC_WRAP is not set
# CONFIG_COMMON_CLK_MT8192_IPESYS is not set
# CONFIG_COMMON_CLK_MT8192_MDPSYS is not set
CONFIG_COMMON_CLK_MT8192_MFGCFG=y
CONFIG_COMMON_CLK_MT8192_MMSYS=y
# CONFIG_COMMON_CLK_MT8192_MSDC is not set
CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
# CONFIG_COMMON_CLK_MT8192_VDECSYS is not set
# CONFIG_COMMON_CLK_MT8192_VENCSYS is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC

#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms

CONFIG_MSTAR_MSC313_MPLL=y
# CONFIG_MCHP_CLK_MPFS is not set
CONFIG_COMMON_CLK_PISTACHIO=y
# CONFIG_COMMON_CLK_QCOM is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
CONFIG_CLK_INTEL_SOCFPGA=y
CONFIG_CLK_INTEL_SOCFPGA32=y
# CONFIG_CLK_INTEL_SOCFPGA64 is not set
CONFIG_SPRD_COMMON_CLK=m
CONFIG_SPRD_SC9860_CLK=m
CONFIG_SPRD_SC9863A_CLK=m
# CONFIG_CLK_STARFIVE_JH7100 is not set
# CONFIG_CLK_SUNXI is not set
# CONFIG_SUNXI_CCU is not set
CONFIG_COMMON_CLK_TI_ADPLL=y
CONFIG_CLK_UNIPHIER=y
# CONFIG_COMMON_CLK_VISCONTI is not set
CONFIG_CLK_LGM_CGU=y
CONFIG_XILINX_VCU=y
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
CONFIG_HWSPINLOCK=y
# CONFIG_HWSPINLOCK_OMAP is not set
# CONFIG_HWSPINLOCK_QCOM is not set
CONFIG_HWSPINLOCK_SPRD=m
# CONFIG_HWSPINLOCK_STM32 is not set
# CONFIG_HWSPINLOCK_SUN6I is not set
CONFIG_HSEM_U8500=m

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_BCM2835_TIMER=y
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
CONFIG_DIGICOLOR_TIMER=y
# CONFIG_OMAP_DM_TIMER is not set
CONFIG_DW_APB_TIMER=y
# CONFIG_FTTMR010_TIMER is not set
CONFIG_IXP4XX_TIMER=y
# CONFIG_MESON6_TIMER is not set
CONFIG_OWL_TIMER=y
CONFIG_RDA_TIMER=y
# CONFIG_SUN4I_TIMER is not set
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_TEGRA186_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
CONFIG_CADENCE_TTC_TIMER=y
CONFIG_ASM9260_TIMER=y
CONFIG_CLKSRC_DBX500_PRCMU=y
CONFIG_CLPS711X_TIMER=y
# CONFIG_MXS_TIMER is not set
CONFIG_NSPIRE_TIMER=y
CONFIG_INTEGRATOR_AP_TIMER=y
CONFIG_CLKSRC_PISTACHIO=y
CONFIG_CLKSRC_STM32_LP=y
CONFIG_ARMV7M_SYSTICK=y
CONFIG_ATMEL_PIT=y
# CONFIG_ATMEL_ST is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
CONFIG_FSL_FTM_TIMER=y
# CONFIG_OXNAS_RPS_TIMER is not set
CONFIG_MTK_TIMER=y
CONFIG_SPRD_TIMER=y
# CONFIG_CLKSRC_JCORE_PIT is not set
CONFIG_SH_TIMER_CMT=y
CONFIG_SH_TIMER_MTU2=y
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
CONFIG_EM_TIMER_STI=y
# CONFIG_CLKSRC_PXA is not set
CONFIG_TIMER_IMX_SYS_CTR=y
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
CONFIG_INGENIC_TIMER=y
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=m

#
# SoundWire Devices
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_OWL_PM_DOMAINS is not set

#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=m
CONFIG_MESON_CLK_MEASURE=m
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_GX_PM_DOMAINS is not set
# CONFIG_MESON_EE_PM_DOMAINS is not set
CONFIG_MESON_MX_SOCINFO=y
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
# CONFIG_APPLE_PMGR_PWRSTATE is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
CONFIG_ASPEED_LPC_CTRL=m
CONFIG_ASPEED_LPC_SNOOP=y
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers

CONFIG_AT91_SOC_ID=y
# CONFIG_AT91_SOC_SFR is not set

#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
CONFIG_SOC_BCM63XX=y
CONFIG_SOC_BRCMSTB=y
# CONFIG_BCM63XX_POWER is not set
CONFIG_BCM_PMB=y
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_FSL_GUTS=y
CONFIG_FSL_MC_DPIO=y
# CONFIG_DPAA2_CONSOLE is not set
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
# CONFIG_SOC_IMX8M is not set
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=m
CONFIG_IXP4XX_NPE=m
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
CONFIG_MTK_INFRACFG=y
CONFIG_MTK_PMIC_WRAP=m
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_SCPSYS_PM_DOMAINS is not set
# CONFIG_MTK_MMSYS is not set
# CONFIG_MTK_SVS is not set
# end of MediaTek SoC drivers

#
# Qualcomm SoC drivers
#
CONFIG_QCOM_COMMAND_DB=m
CONFIG_QCOM_GENI_SE=m
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
CONFIG_QCOM_QMI_HELPERS=m
CONFIG_QCOM_RPMH=m
CONFIG_QCOM_RPMHPD=m
# CONFIG_QCOM_SMEM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers

# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
CONFIG_ROCKCHIP_IODOMAIN=m
CONFIG_ROCKCHIP_PM_DOMAINS=y
# CONFIG_ROCKCHIP_DTPM is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
CONFIG_SOC_TI=y
CONFIG_UX500_SOC_ID=y

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=m
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m
CONFIG_ARM_IMX_BUS_DEVFREQ=m
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
# CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_FSA9480=m
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=y
# CONFIG_EXTCON_MAX77843 is not set
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_PTN5150=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=m
# CONFIG_EXTCON_USB_GPIO is not set
# CONFIG_EXTCON_USBC_CROS_EC is not set
CONFIG_EXTCON_USBC_TUSB320=m
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_ATMEL is not set
CONFIG_PWM_ATMEL_TCB=y
# CONFIG_PWM_BCM_IPROC is not set
CONFIG_PWM_BCM_KONA=m
CONFIG_PWM_BCM2835=y
# CONFIG_PWM_BERLIN is not set
CONFIG_PWM_BRCMSTB=m
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_CROS_EC is not set
CONFIG_PWM_EP93XX=m
# CONFIG_PWM_FSL_FTM is not set
CONFIG_PWM_HIBVT=m
CONFIG_PWM_IMG=y
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
CONFIG_PWM_IMX_TPM=y
# CONFIG_PWM_INTEL_LGM is not set
CONFIG_PWM_IQS620A=y
# CONFIG_PWM_JZ4740 is not set
CONFIG_PWM_KEEMBAY=y
# CONFIG_PWM_LPC18XX_SCT is not set
CONFIG_PWM_LPC32XX=m
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PLATFORM=y
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_MXS is not set
# CONFIG_PWM_NTXEC is not set
CONFIG_PWM_OMAP_DMTIMER=m
CONFIG_PWM_PCA9685=m
CONFIG_PWM_PXA=y
CONFIG_PWM_RASPBERRYPI_POE=m
# CONFIG_PWM_RCAR is not set
CONFIG_PWM_RENESAS_TPU=m
CONFIG_PWM_ROCKCHIP=m
CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_SIFIVE=y
CONFIG_PWM_SL28CPLD=y
CONFIG_PWM_SPEAR=y
CONFIG_PWM_SPRD=m
CONFIG_PWM_STI=y
# CONFIG_PWM_STM32 is not set
CONFIG_PWM_STM32_LP=m
# CONFIG_PWM_STMPE is not set
CONFIG_PWM_SUN4I=m
# CONFIG_PWM_SUNPLUS is not set
CONFIG_PWM_TEGRA=y
CONFIG_PWM_TIECAP=y
# CONFIG_PWM_TIEHRPWM is not set
CONFIG_PWM_VISCONTI=m
# CONFIG_PWM_VT8500 is not set
# CONFIG_PWM_XILINX is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_MADERA_IRQ=y
CONFIG_JCORE_AIC=y
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
CONFIG_RENESAS_RZA1_IRQC=y
# CONFIG_RENESAS_RZG2L_IRQC is not set
CONFIG_SL28CPLD_INTC=y
CONFIG_TS4800_IRQ=y
# CONFIG_XILINX_INTC is not set
# CONFIG_INGENIC_TCU_IRQ is not set
CONFIG_IRQ_UNIPHIER_AIDET=y
# CONFIG_MESON_IRQ_GPIO is not set
CONFIG_IMX_IRQSTEER=y
CONFIG_IMX_INTMUX=y
# CONFIG_EXYNOS_IRQ_COMBINER is not set
CONFIG_MST_IRQ=y
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
CONFIG_RESET_ATH79=y
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
CONFIG_RESET_BRCMSTB=y
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_HSDK is not set
CONFIG_RESET_IMX7=m
# CONFIG_RESET_INTEL_GW is not set
CONFIG_RESET_K210=y
CONFIG_RESET_LANTIQ=y
# CONFIG_RESET_LPC18XX is not set
CONFIG_RESET_MCHP_SPARX5=y
# CONFIG_RESET_MESON is not set
CONFIG_RESET_MESON_AUDIO_ARB=m
CONFIG_RESET_NPCM=y
# CONFIG_RESET_PISTACHIO is not set
CONFIG_RESET_QCOM_AOSS=m
# CONFIG_RESET_QCOM_PDC is not set
# CONFIG_RESET_RASPBERRYPI is not set
CONFIG_RESET_RZG2L_USBPHY_CTRL=m
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SOCFPGA=y
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SCI is not set
CONFIG_RESET_TI_SYSCON=y
# CONFIG_RESET_TI_TPS380X is not set
# CONFIG_RESET_TN48M_CPLD is not set
CONFIG_RESET_UNIPHIER=m
CONFIG_RESET_UNIPHIER_GLUE=y
# CONFIG_RESET_ZYNQ is not set
CONFIG_COMMON_RESET_HI3660=y
# CONFIG_COMMON_RESET_HI6220 is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_LPC18XX_USB_OTG=m
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set
CONFIG_PHY_CAN_TRANSCEIVER=m
CONFIG_PHY_SUN6I_MIPI_DPHY=y
CONFIG_PHY_SUN50I_USB3=y
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
CONFIG_PHY_MESON_G12A_USB2=y
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
CONFIG_PHY_MESON_AXG_MIPI_DPHY=y

#
# PHY drivers for Broadcom platforms
#
CONFIG_PHY_BCM63XX_USBH=y
CONFIG_PHY_CYGNUS_PCIE=m
# CONFIG_PHY_BCM_SR_USB is not set
CONFIG_BCM_KONA_USB2_PHY=m
CONFIG_PHY_BCM_NS_USB2=m
CONFIG_PHY_BCM_NS_USB3=y
# CONFIG_PHY_NS2_PCIE is not set
CONFIG_PHY_NS2_USB_DRD=y
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
CONFIG_PHY_BCM_SR_PCIE=y
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_CADENCE_TORRENT is not set
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
# CONFIG_PHY_CADENCE_SALVO is not set
CONFIG_PHY_FSL_IMX8MQ_USB=m
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_HI3660_USB=y
CONFIG_PHY_HI3670_USB=y
# CONFIG_PHY_HI3670_PCIE is not set
CONFIG_PHY_HISTB_COMBPHY=m
CONFIG_PHY_HISI_INNO_USB2=y
CONFIG_PHY_LANTIQ_VRX200_PCIE=y
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
CONFIG_ARMADA375_USBCLUSTER_PHY=y
# CONFIG_PHY_BERLIN_SATA is not set
CONFIG_PHY_BERLIN_USB=m
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_PHY_PXA_USB=y
CONFIG_PHY_MMP3_USB=m
CONFIG_PHY_MMP3_HSIC=m
# CONFIG_PHY_MTK_PCIE is not set
CONFIG_PHY_MTK_TPHY=y
CONFIG_PHY_MTK_UFS=y
CONFIG_PHY_MTK_XSPHY=y
CONFIG_PHY_MTK_HDMI=m
CONFIG_PHY_MTK_MIPI_DSI=y
# CONFIG_PHY_MTK_DP is not set
CONFIG_PHY_SPARX5_SERDES=m
# CONFIG_PHY_LAN966X_SERDES is not set
CONFIG_PHY_OCELOT_SERDES=m
# CONFIG_PHY_ATH79_USB is not set
# CONFIG_PHY_QCOM_EDP is not set
CONFIG_PHY_QCOM_IPQ4019_USB=m
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
CONFIG_PHY_QCOM_QUSB2=y
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
CONFIG_PHY_QCOM_USB_HS_28NM=m
CONFIG_PHY_QCOM_USB_SS=y
CONFIG_PHY_QCOM_IPQ806X_USB=y
# CONFIG_PHY_MT7621_PCI is not set
CONFIG_PHY_RALINK_USB=m
CONFIG_PHY_RCAR_GEN3_USB3=m
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
CONFIG_PHY_ROCKCHIP_INNO_HDMI=m
CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY=m
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=m
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
CONFIG_PHY_EXYNOS_PCIE=y
# CONFIG_PHY_SAMSUNG_UFS is not set
CONFIG_PHY_SAMSUNG_USB2=m
CONFIG_PHY_S5PV210_USB2=y
CONFIG_PHY_UNIPHIER_USB2=y
CONFIG_PHY_UNIPHIER_USB3=y
# CONFIG_PHY_UNIPHIER_PCIE is not set
CONFIG_PHY_UNIPHIER_AHCI=m
CONFIG_PHY_ST_SPEAR1310_MIPHY=y
CONFIG_PHY_ST_SPEAR1340_MIPHY=y
# CONFIG_PHY_STIH407_USB is not set
CONFIG_PHY_STM32_USBPHYC=m
CONFIG_PHY_TEGRA194_P2U=m
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
CONFIG_PHY_J721E_WIZ=m
CONFIG_OMAP_CONTROL_PHY=m
CONFIG_TI_PIPE3=m
CONFIG_PHY_INTEL_KEEMBAY_EMMC=m
CONFIG_PHY_INTEL_KEEMBAY_USB=y
CONFIG_PHY_INTEL_LGM_COMBO=y
CONFIG_PHY_INTEL_LGM_EMMC=m
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
CONFIG_PHY_XILINX_ZYNQMP=y
# end of PHY Subsystem

CONFIG_POWERCAP=y
# CONFIG_IDLE_INJECT is not set
CONFIG_DTPM=y
# CONFIG_MCB is not set

#
# Performance monitor support
#
# CONFIG_ARM_CCN is not set
# CONFIG_ARM_CMN is not set
# CONFIG_FSL_IMX8_DDR_PMU is not set
CONFIG_ARM_DMC620_PMU=y
# end of Performance monitor support

CONFIG_RAS=y

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_IMX_IIM is not set
CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_JZ4780_EFUSE=m
CONFIG_NVMEM_LPC18XX_EEPROM=y
# CONFIG_NVMEM_LPC18XX_OTP is not set
CONFIG_NVMEM_MXS_OCOTP=m
CONFIG_MTK_EFUSE=y
# CONFIG_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_QCOM_QFPROM is not set
# CONFIG_NVMEM_SPMI_SDAM is not set
# CONFIG_ROCKCHIP_EFUSE is not set
# CONFIG_ROCKCHIP_OTP is not set
CONFIG_NVMEM_BCM_OCOTP=m
# CONFIG_NVMEM_STM32_ROMEM is not set
CONFIG_UNIPHIER_EFUSE=y
# CONFIG_NVMEM_VF610_OCOTP is not set
CONFIG_MESON_MX_EFUSE=y
CONFIG_NVMEM_SNVS_LPGPR=m
# CONFIG_SC27XX_EFUSE is not set
# CONFIG_SPRD_EFUSE is not set
CONFIG_NVMEM_RMEM=m
CONFIG_NVMEM_BRCM_NVRAM=y
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
# CONFIG_NVMEM_APPLE_EFUSES is not set

#
# HW tracing support
#
CONFIG_STM=m
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not set
# CONFIG_STM_DUMMY is not set
# CONFIG_STM_SOURCE_CONSOLE is not set
CONFIG_STM_SOURCE_HEARTBEAT=m
# CONFIG_STM_SOURCE_FTRACE is not set
CONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_GTH is not set
# CONFIG_INTEL_TH_STH is not set
# CONFIG_INTEL_TH_MSU is not set
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support

CONFIG_FPGA=y
CONFIG_FPGA_MGR_SOCFPGA=m
# CONFIG_FPGA_MGR_SOCFPGA_A10 is not set
# CONFIG_ALTERA_PR_IP_CORE is not set
CONFIG_FPGA_MGR_ZYNQ_FPGA=y
# CONFIG_FPGA_BRIDGE is not set
# CONFIG_FPGA_DFL is not set
CONFIG_FPGA_MGR_ZYNQMP_FPGA=y
CONFIG_FPGA_MGR_VERSAL_FPGA=m
CONFIG_FSI=m
CONFIG_FSI_NEW_DEV_NODE=y
# CONFIG_FSI_MASTER_GPIO is not set
# CONFIG_FSI_MASTER_HUB is not set
CONFIG_FSI_MASTER_AST_CF=m
# CONFIG_FSI_MASTER_ASPEED is not set
CONFIG_FSI_SCOM=m
CONFIG_FSI_SBEFIFO=m
CONFIG_FSI_OCC=m
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers

CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
CONFIG_SLIMBUS=m
CONFIG_SLIM_QCOM_CTRL=m
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
CONFIG_MOST=y
# CONFIG_MOST_CDEV is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_EXT4_KUNIT_TESTS=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=y
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
CONFIG_BTRFS_ASSERT=y
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
# CONFIG_F2FS_STAT_FS is not set
# CONFIG_F2FS_FS_XATTR is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
# CONFIG_F2FS_IOSTAT is not set
CONFIG_ZONEFS_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
# CONFIG_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=m
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_NFS_EXPORT=y
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=m
CONFIG_CACHEFILES_DEBUG=y
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_FAT_KUNIT_TEST=y
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
CONFIG_EROFS_FS=y
# CONFIG_EROFS_FS_DEBUG is not set
# CONFIG_EROFS_FS_XATTR is not set
CONFIG_EROFS_FS_ZIP=y
# CONFIG_EROFS_FS_ZIP_LZMA is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=y
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_SELFTEST=m
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL_PATTERN is not set
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization

CONFIG_CC_HAS_RANDSTRUCT=y
# CONFIG_RANDSTRUCT_NONE is not set
CONFIG_RANDSTRUCT_FULL=y
CONFIG_RANDSTRUCT=y
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m

#
# Public-key cryptography
#
# CONFIG_CRYPTO_RSA is not set
CONFIG_CRYPTO_DH=m
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_KEYWRAP=m
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_HCTR2 is not set
CONFIG_CRYPTO_ESSIV=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MD5_PPC=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA1_PPC=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=m
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_RNG_CAVP=y
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_STMP_DEVICE=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=m
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
CONFIG_CRC4=m
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DMA_DECLARE_COHERENT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=m
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_SBITMAP=y
CONFIG_PARMAN=m
# CONFIG_OBJAGG is not set
# end of Library routines

CONFIG_POLYNOMIAL=m

#
# Kernel hacking
#

#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=8192
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HEADERS_INSTALL=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
CONFIG_DEBUG_FS_DISALLOW_MOUNT=y
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_HONOUR_BLOCKLIST=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
CONFIG_DEBUG_KMEMLEAK_TEST=m
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VM_PGFLAGS is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_KMAP_LOCAL=y
CONFIG_DEBUG_HIGHMEM=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
# CONFIG_KASAN_OUTLINE is not set
CONFIG_KASAN_INLINE=y
CONFIG_KASAN_VMALLOC=y
CONFIG_KASAN_KUNIT_TEST=y
CONFIG_KASAN_MODULE_TEST=m
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_WW_MUTEX_SELFTEST=m
CONFIG_SCF_TORTURE_TEST=m
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=m
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_REF_SCALE_TEST=m
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
CONFIG_IRQSOFF_TRACER=y
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_KPROBE_EVENTS is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
# CONFIG_USER_EVENTS is not set
CONFIG_HIST_TRIGGERS=y
CONFIG_TRACE_EVENT_INJECT=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_TRACE_EVAL_MAP_FILE=y
CONFIG_FTRACE_RECORD_RECURSION=y
CONFIG_FTRACE_RECORD_RECURSION_SIZE=128
# CONFIG_RING_BUFFER_RECORD_RECURSION is not set
# CONFIG_GCOV_PROFILE_FTRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_STARTUP_TEST=y
CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS=y
CONFIG_PREEMPTIRQ_DELAY_TEST=m
CONFIG_SYNTH_EVENT_GEN_TEST=y
# CONFIG_HIST_TRIGGERS_DEBUG is not set
# CONFIG_RV is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y

#
# powerpc Debugging
#
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
CONFIG_JUMP_LABEL_FEATURE_CHECKS=y
CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG=y
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
CONFIG_DEBUGGER=y
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_KASAN_SHADOW_OFFSET=0xe0000000
# end of powerpc Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_PM_NOTIFIER_ERROR_INJECT is not set
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage

# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking

Re: [PATCH 08/26] fuse: Add fuse-bpf, a stacked fs extension for FUSE

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2233 bytes --]

Hi Daniel,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on bf682942cd26ce9cd5e87f73ae099b383041e782]

url:    https://github.com/intel-lab-lkp/linux/commits/Daniel-Rosenberg/FUSE-BPF-A-Stacked-Filesystem-Extension-for-FUSE/20220927-095052
base:   bf682942cd26ce9cd5e87f73ae099b383041e782
config: openrisc-randconfig-r004-20220926
compiler: or1k-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/6e7c858791178a83dde45170982c6cce3f625fc3
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Daniel-Rosenberg/FUSE-BPF-A-Stacked-Filesystem-Extension-for-FUSE/20220927-095052
        git checkout 6e7c858791178a83dde45170982c6cce3f625fc3
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=openrisc SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   or1k-linux-ld: fs/fuse/dev.o: in function `fuse_copy_lookup':
>> fs/fuse/dev.c:1027: undefined reference to `parse_fuse_entry_bpf'
   fs/fuse/dev.c:1027:(.text+0x33ac): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `parse_fuse_entry_bpf'


vim +1027 fs/fuse/dev.c

  1013	
  1014	/* Copy the fuse-bpf lookup args and verify them */
  1015	static int fuse_copy_lookup(struct fuse_copy_state *cs, void *val, unsigned size)
  1016	{
  1017		struct fuse_entry_bpf_out *febo = (struct fuse_entry_bpf_out *)val;
  1018		struct fuse_entry_bpf *feb = container_of(febo, struct fuse_entry_bpf, out);
  1019		int err;
  1020	
  1021		if (size && size != sizeof(*febo))
  1022			return -EINVAL;
  1023		err = fuse_copy_one(cs, val, size);
  1024		if (err)
  1025			return err;
  1026		if (size)
> 1027			err = parse_fuse_entry_bpf(feb);
  1028		return err;
  1029	}
  1030	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 166037 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/openrisc 6.0.0-rc6 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="or1k-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_WATCH_QUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
# CONFIG_TIME_KUNIT_TEST is not set

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
# CONFIG_FORCE_TASKS_RCU is not set
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y
# CONFIG_TASKS_TRACE_RCU_READ_MB is not set
# end of RCU Subsystem

CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=m

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
CONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not set
CONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
CONFIG_RD_LZ4=y
# CONFIG_RD_ZSTD is not set
CONFIG_BOOT_CONFIG=y
CONFIG_BOOT_CONFIG_EMBED=y
CONFIG_BOOT_CONFIG_EMBED_FILE=""
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
# CONFIG_EMBEDDED is not set
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_OPENRISC=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_MMU=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_GENERIC_CSUM=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y

#
# Processor type and features
#
CONFIG_OR1K_1200=y
CONFIG_DCACHE_WRITETHROUGH=y
CONFIG_OPENRISC_BUILTIN_DTB=""

#
# Class II Instructions
#
# CONFIG_OPENRISC_HAVE_INST_FF1 is not set
CONFIG_OPENRISC_HAVE_INST_FL1=y
CONFIG_OPENRISC_HAVE_INST_MUL=y
CONFIG_OPENRISC_HAVE_INST_DIV=y
# CONFIG_OPENRISC_HAVE_INST_CMOV is not set
# CONFIG_OPENRISC_HAVE_INST_ROR is not set
# CONFIG_OPENRISC_HAVE_INST_RORI is not set
CONFIG_OPENRISC_HAVE_INST_SEXT=y
# end of Class II Instructions

# CONFIG_SMP is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_OPENRISC_NO_SPR_SR_DSX=y
CONFIG_OPENRISC_HAVE_SHADOW_GPRS=y
CONFIG_CMDLINE=""

#
# Debugging options
#
CONFIG_JUMP_UPON_UNHANDLED_EXCEPTION=y
# CONFIG_OPENRISC_ESR_EXCEPTION_BUG_CHECK is not set
# end of Debugging options
# end of Processor type and features

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_DMA_SET_UNCACHED=y
CONFIG_ARCH_HAS_DMA_CLEAR_UNCACHED=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_MMU_GATHER_NO_RANGE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_LTO_NONE=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ISA_BUS_API=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPU_NO_EFFICIENT_FFS=y
CONFIG_LOCK_EVENT_COUNTS=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# end of GCOV-based kernel profiling
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_WBT=y
# CONFIG_BLK_WBT_MQ is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
# CONFIG_BLK_SED_OPAL is not set
CONFIG_BLK_INLINE_ENCRYPTION=y
# CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not set
CONFIG_IOSCHED_BFQ=y
# end of IO Schedulers

CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_ELF_KUNIT_TEST is not set
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_BINFMT_SCRIPT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SWAP=y
# CONFIG_ZSWAP is not set

#
# SLAB allocator options
#
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_COMPAT_BRK=y
CONFIG_FLATMEM=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PAGE_REPORTING is not set
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CMA is not set
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_USERFAULTFD=y

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

# CONFIG_NET is not set

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEFAULT is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
CONFIG_PCIEASPM_POWER_SUPERSAVE=y
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=m
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_BRIDGE_EMUL=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
# CONFIG_PCI_PASID is not set
CONFIG_PCIE_BUS_TUNE_OFF=y
# CONFIG_PCIE_BUS_DEFAULT is not set
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
# CONFIG_VGA_ARB is not set
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#
CONFIG_PCI_AARDVARK=m
# CONFIG_PCIE_XILINX_NWL is not set
# CONFIG_PCI_FTPCI100 is not set
CONFIG_PCI_TEGRA=y
CONFIG_PCIE_RCAR_HOST=y
# CONFIG_PCIE_RCAR_EP is not set
CONFIG_PCI_HOST_COMMON=y
# CONFIG_PCI_HOST_GENERIC is not set
CONFIG_PCIE_XILINX=y
# CONFIG_PCIE_XILINX_CPM is not set
# CONFIG_PCI_XGENE is not set
# CONFIG_PCI_V3_SEMI is not set
# CONFIG_PCI_VERSATILE is not set
CONFIG_PCIE_ALTERA=y
# CONFIG_PCIE_ALTERA_MSI is not set
# CONFIG_PCI_HOST_THUNDER_PEM is not set
# CONFIG_PCI_HOST_THUNDER_ECAM is not set
CONFIG_PCIE_ROCKCHIP=y
CONFIG_PCIE_ROCKCHIP_HOST=y
# CONFIG_PCIE_ROCKCHIP_EP is not set
CONFIG_PCIE_MEDIATEK=m
CONFIG_PCIE_MEDIATEK_GEN3=y
CONFIG_PCIE_BRCMSTB=y
# CONFIG_PCI_LOONGSON is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
CONFIG_PCIE_APPLE_MSI_DOORBELL_ADDR=0xfffff000
CONFIG_PCIE_APPLE=y
# CONFIG_PCIE_MT7621 is not set

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCIE_DW_PLAT_EP is not set
CONFIG_PCI_EXYNOS=m
CONFIG_PCI_IMX6=y
CONFIG_PCIE_SPEAR13XX=y
CONFIG_PCI_KEYSTONE=y
CONFIG_PCI_KEYSTONE_HOST=y
# CONFIG_PCI_KEYSTONE_EP is not set
# CONFIG_PCI_LAYERSCAPE is not set
CONFIG_PCI_LAYERSCAPE_EP=y
CONFIG_PCI_HISI=y
# CONFIG_PCIE_QCOM is not set
CONFIG_PCIE_QCOM_EP=m
# CONFIG_PCIE_ARMADA_8K is not set
CONFIG_PCIE_ARTPEC6=y
# CONFIG_PCIE_ARTPEC6_HOST is not set
CONFIG_PCIE_ARTPEC6_EP=y
CONFIG_PCIE_ROCKCHIP_DW_HOST=y
# CONFIG_PCIE_INTEL_GW is not set
CONFIG_PCIE_KEEMBAY=y
CONFIG_PCIE_KEEMBAY_HOST=y
CONFIG_PCIE_KEEMBAY_EP=y
CONFIG_PCIE_KIRIN=m
CONFIG_PCIE_HISI_STB=y
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_TEGRA194_HOST is not set
# CONFIG_PCIE_TEGRA194_EP is not set
CONFIG_PCIE_VISCONTI_HOST=y
# CONFIG_PCIE_UNIPHIER is not set
CONFIG_PCIE_UNIPHIER_EP=y
CONFIG_PCIE_AL=y
# CONFIG_PCIE_FU740 is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# CONFIG_PCIE_MOBIVEIL_PLAT is not set
# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_EP=y
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCIE_CADENCE_PLAT_EP is not set
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
CONFIG_PCI_J721E_EP=y
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
# CONFIG_PCI_ENDPOINT_CONFIGFS is not set
CONFIG_PCI_EPF_TEST=m
CONFIG_PCI_EPF_NTB=y
CONFIG_PCI_EPF_VNTB=y
# end of PCI Endpoint

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers

CONFIG_CXL_BUS=y
CONFIG_CXL_PCI=m
# CONFIG_CXL_MEM_RAW_COMMANDS is not set
CONFIG_CXL_MEM=m
CONFIG_CXL_PORT=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
# CONFIG_YENTA_RICOH is not set
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DEBUG=y
# CONFIG_RAPIDIO_ENUM_BASIC is not set
CONFIG_RAPIDIO_CHMAN=y
CONFIG_RAPIDIO_MPORT_CDEV=y

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=m
CONFIG_RAPIDIO_CPS_GEN2=y
# CONFIG_RAPIDIO_RXS_GEN3 is not set
# end of RapidIO Switch drivers

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_PM_QOS_KUNIT_TEST is not set
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
# CONFIG_DRIVER_PE_KUNIT_TEST is not set
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=m
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_I3C=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_ARM_INTEGRATOR_LM=y
# CONFIG_BT1_APB is not set
CONFIG_BT1_AXI=y
CONFIG_MOXTET=m
CONFIG_HISILICON_LPC=y
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_MHI_BUS is not set
CONFIG_MHI_BUS_EP=y
# end of Bus devices

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=y
CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
CONFIG_ARM_SCMI_HAVE_SHMEM=y
CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
# CONFIG_ARM_SCMI_TRANSPORT_VIRTIO is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=m
CONFIG_ARM_SCMI_POWER_CONTROL=m
# end of ARM System Control and Management Interface Protocol

CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_ARM_SCPI_POWER_DOMAIN=m
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT=y
CONFIG_TURRIS_MOX_RWTM=m
# CONFIG_BCM47XX_NVRAM is not set
CONFIG_TEE_BNXT_FW=y
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=m
CONFIG_GNSS_MTK_SERIAL=m
CONFIG_GNSS_SIRF_SERIAL=m
# CONFIG_GNSS_UBX_SERIAL is not set
CONFIG_GNSS_USB=y
# CONFIG_MTD is not set
# CONFIG_MTD_NAND_ECC_MXIC is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_ALL_DTBS=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set

#
# NVME Support
#
CONFIG_NVME_COMMON=y
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_VERBOSE_ERRORS=y
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=m
# CONFIG_NVME_FC is not set
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_AUTH=y
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=m
CONFIG_PHANTOM=m
CONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not set
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_GEHC_ACHC=y
CONFIG_HP_ILO=m
CONFIG_QCOM_COINCELL=y
CONFIG_QCOM_FASTRPC=y
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_PCH_PHUB=m
CONFIG_LATTICE_ECP3_CONFIG=y
# CONFIG_SRAM is not set
CONFIG_DW_XDATA_PCIE=m
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_HISI_HIKEY_USB=m
CONFIG_OPEN_DICE=m
CONFIG_VCPU_STALL_DETECTOR=m
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

CONFIG_CB710_CORE=m
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_SPI=y
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_ECHO=y
CONFIG_BCM_VK=y
# CONFIG_BCM_VK_TTY is not set
CONFIG_MISC_ALCOR_PCI=y
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
CONFIG_HABANA_AI=y
CONFIG_UACCE=y
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_SG is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CHR_DEV_SCH=m
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_BOOT_SYSFS is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_HISI_SAS=m
# CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE is not set
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPI3MR=m
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_FLASHPOINT is not set
CONFIG_SCSI_MYRB=m
CONFIG_SCSI_MYRS=m
# CONFIG_SCSI_SNIC is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_FDOMAIN=m
CONFIG_SCSI_FDOMAIN_PCI=m
CONFIG_SCSI_IPS=m
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_INIA100=m
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_MMIO is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_WD719X=m
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
# CONFIG_SCSI_DH_ALUA is not set
# end of SCSI device support

CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_AHCI_BRCM=m
# CONFIG_AHCI_DA850 is not set
# CONFIG_AHCI_DM816 is not set
# CONFIG_AHCI_IMX is not set
CONFIG_AHCI_CEVA=m
CONFIG_AHCI_MTK=m
# CONFIG_AHCI_MVEBU is not set
CONFIG_AHCI_SUNXI=m
# CONFIG_AHCI_TEGRA is not set
# CONFIG_AHCI_XGENE is not set
CONFIG_AHCI_QORIQ=m
# CONFIG_SATA_FSL is not set
CONFIG_SATA_GEMINI=m
CONFIG_SATA_AHCI_SEATTLE=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_UNSTRIPED=m
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
CONFIG_DM_WRITECACHE=m
CONFIG_DM_EBS=m
CONFIG_DM_ERA=m
CONFIG_DM_CLONE=m
# CONFIG_DM_MIRROR is not set
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_DM_ZONED=m
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
# CONFIG_TCM_PSCSI is not set
# CONFIG_LOOPBACK_TARGET is not set
CONFIG_SBP_TARGET=m
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
# CONFIG_TABLET_USB_AIPTEK is not set
CONFIG_TABLET_USB_HANWANG=y
# CONFIG_TABLET_USB_KBTAB is not set
CONFIG_TABLET_USB_PEGASUS=y
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=m
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_ADC=m
CONFIG_TOUCHSCREEN_AR1021_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=y
# CONFIG_TOUCHSCREEN_BU21029 is not set
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m
CONFIG_TOUCHSCREEN_CY8CTMA140=m
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DA9052=m
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
# CONFIG_TOUCHSCREEN_EXC3000 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=m
CONFIG_TOUCHSCREEN_HIDEEP=y
CONFIG_TOUCHSCREEN_HYCON_HY46XX=y
CONFIG_TOUCHSCREEN_ILI210X=y
# CONFIG_TOUCHSCREEN_ILITEK is not set
# CONFIG_TOUCHSCREEN_IPROC is not set
CONFIG_TOUCHSCREEN_S6SY761=y
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=m
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MSG2638 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_IMAGIS=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=m
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
# CONFIG_TOUCHSCREEN_RASPBERRYPI_FW is not set
CONFIG_TOUCHSCREEN_MIGOR=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_PIXCIR=m
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM831X is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_MXS_LRADC=m
CONFIG_TOUCHSCREEN_MX25=y
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TS4800=m
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_RM_TS is not set
CONFIG_TOUCHSCREEN_SILEAD=y
CONFIG_TOUCHSCREEN_SIS_I2C=y
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
CONFIG_TOUCHSCREEN_STMPE=m
# CONFIG_TOUCHSCREEN_SUN4I is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
CONFIG_TOUCHSCREEN_TPS6507X=y
# CONFIG_TOUCHSCREEN_ZET6223 is not set
CONFIG_TOUCHSCREEN_ZFORCE=y
CONFIG_TOUCHSCREEN_COLIBRI_VF50=m
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_TOUCHSCREEN_IQS5XX=m
# CONFIG_TOUCHSCREEN_ZINITIX is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
# CONFIG_RMI4_SPI is not set
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
CONFIG_RMI4_F3A=y
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_APBPS2 is not set
CONFIG_SERIO_OLPC_APSP=y
CONFIG_SERIO_SUN4I_PS2=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LDISC_AUTOLOAD is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=m
CONFIG_SERIAL_ATMEL=y
# CONFIG_SERIAL_ATMEL_CONSOLE is not set
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_MESON=m
# CONFIG_SERIAL_MESON_CONSOLE is not set
CONFIG_SERIAL_CLPS711X=y
CONFIG_SERIAL_CLPS711X_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set
# CONFIG_SERIAL_TEGRA is not set
CONFIG_SERIAL_TEGRA_TCU=y
# CONFIG_SERIAL_TEGRA_TCU_CONSOLE is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_IMX=m
CONFIG_SERIAL_IMX_CONSOLE=m
# CONFIG_SERIAL_IMX_EARLYCON is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_SH_SCI=m
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
# CONFIG_SERIAL_HS_LPC32XX is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_ICOM is not set
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_MSM=y
# CONFIG_SERIAL_MSM_CONSOLE is not set
CONFIG_SERIAL_QCOM_GENI=m
# CONFIG_SERIAL_QCOM_GENI_CONSOLE is not set
# CONFIG_SERIAL_VT8500 is not set
CONFIG_SERIAL_OMAP=m
# CONFIG_SERIAL_SIFIVE is not set
CONFIG_SERIAL_LANTIQ=y
CONFIG_SERIAL_LANTIQ_CONSOLE=y
# CONFIG_SERIAL_QE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_BCM63XX is not set
CONFIG_SERIAL_ALTERA_JTAGUART=m
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_PCH_UART=m
CONFIG_SERIAL_MXS_AUART=m
CONFIG_SERIAL_XILINX_PS_UART=m
# CONFIG_SERIAL_MPS2_UART is not set
CONFIG_SERIAL_ARC=y
# CONFIG_SERIAL_ARC_CONSOLE is not set
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_MEN_Z135 is not set
CONFIG_SERIAL_SPRD=y
CONFIG_SERIAL_SPRD_CONSOLE=y
CONFIG_SERIAL_STM32=y
# CONFIG_SERIAL_STM32_CONSOLE is not set
# CONFIG_SERIAL_MVEBU_UART is not set
CONFIG_SERIAL_OWL=m
CONFIG_SERIAL_RDA=y
# CONFIG_SERIAL_RDA_CONSOLE is not set
CONFIG_SERIAL_MILBEAUT_USIO=y
CONFIG_SERIAL_MILBEAUT_USIO_PORTS=4
CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE=y
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
# CONFIG_SERIAL_LITEUART_CONSOLE is not set
CONFIG_SERIAL_SUNPLUS=m
CONFIG_SERIAL_SUNPLUS_CONSOLE=y
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_MOXA_INTELLIO=m
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK_GT=y
# CONFIG_N_HDLC is not set
# CONFIG_GOLDFISH_TTY is not set
CONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
CONFIG_RPMSG_TTY=m
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
# CONFIG_IPMI_IPMB is not set
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
CONFIG_ASPEED_BT_IPMI_BMC=y
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_ATMEL=y
CONFIG_HW_RANDOM_BA431=y
# CONFIG_HW_RANDOM_BCM2835 is not set
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_IXP4XX=y
# CONFIG_HW_RANDOM_OMAP is not set
# CONFIG_HW_RANDOM_OMAP3_ROM is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_HW_RANDOM_IMX_RNGC is not set
# CONFIG_HW_RANDOM_NOMADIK is not set
CONFIG_HW_RANDOM_STM32=m
CONFIG_HW_RANDOM_MESON=y
# CONFIG_HW_RANDOM_MTK is not set
CONFIG_HW_RANDOM_EXYNOS=m
CONFIG_HW_RANDOM_NPCM=m
CONFIG_HW_RANDOM_KEYSTONE=m
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_DEVMEM is not set
CONFIG_DEVPORT=y
CONFIG_TCG_TPM=y
# CONFIG_HW_RANDOM_TPM is not set
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
CONFIG_TCG_TIS_I2C=m
CONFIG_TCG_TIS_SYNQUACER=y
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=y
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
CONFIG_TCG_TIS_ST33ZP24_SPI=y
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_PCIE=m
# CONFIG_XILLYBUS_OF is not set
# CONFIG_XILLYUSB is not set
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_DEMUX_PINCTRL is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
# end of I2C Algorithms

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=m
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_HIX5HD2=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NVIDIA_GPU is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=m
CONFIG_I2C_ASPEED=y
CONFIG_I2C_AT91=y
CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL=m
CONFIG_I2C_AXXIA=m
CONFIG_I2C_BCM2835=m
CONFIG_I2C_BCM_IPROC=m
CONFIG_I2C_BCM_KONA=m
CONFIG_I2C_BRCMSTB=m
# CONFIG_I2C_CADENCE is not set
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DAVINCI=y
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_PCI=m
CONFIG_I2C_DIGICOLOR=m
CONFIG_I2C_EG20T=m
CONFIG_I2C_EMEV2=m
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=m
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
CONFIG_I2C_HIGHLANDER=m
# CONFIG_I2C_HISI is not set
CONFIG_I2C_IMG=y
# CONFIG_I2C_IMX is not set
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_IOP3XX=y
CONFIG_I2C_JZ4780=m
CONFIG_I2C_LPC2K=y
CONFIG_I2C_MESON=m
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_MXS=y
CONFIG_I2C_NPCM=y
CONFIG_I2C_OCORES=m
# CONFIG_I2C_OMAP is not set
CONFIG_I2C_OWL=y
CONFIG_I2C_APPLE=m
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_PNX=m
CONFIG_I2C_PXA=m
# CONFIG_I2C_PXA_SLAVE is not set
CONFIG_I2C_QCOM_CCI=y
# CONFIG_I2C_QCOM_GENI is not set
CONFIG_I2C_QUP=y
CONFIG_I2C_RIIC=y
CONFIG_I2C_RK3X=y
CONFIG_I2C_RZV2M=m
CONFIG_I2C_S3C2410=m
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_SPRD=y
# CONFIG_I2C_ST is not set
CONFIG_I2C_STM32F4=m
CONFIG_I2C_STM32F7=m
CONFIG_I2C_SUN6I_P2WI=m
CONFIG_I2C_SYNQUACER=y
# CONFIG_I2C_TEGRA_BPMP is not set
CONFIG_I2C_UNIPHIER=m
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_VERSATILE=y
CONFIG_I2C_WMT=m
CONFIG_I2C_XILINX=y
CONFIG_I2C_XLP9XX=y
CONFIG_I2C_RCAR=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_CP2615=y
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=m
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIPERBOARD=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_VIRTIO=m
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
CONFIG_I2C_SLAVE_TESTUNIT=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=m
CONFIG_DW_I3C_MASTER=y
CONFIG_SVC_I3C_MASTER=y
# CONFIG_MIPI_I3C_HCI is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=m
CONFIG_SPI_ALTERA_CORE=y
# CONFIG_SPI_AR934X is not set
CONFIG_SPI_ATH79=m
CONFIG_SPI_ARMADA_3700=m
CONFIG_SPI_ASPEED_SMC=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_AT91_USART=y
CONFIG_SPI_ATMEL_QUADSPI=m
CONFIG_SPI_AXI_SPI_ENGINE=m
# CONFIG_SPI_BCM2835 is not set
CONFIG_SPI_BCM2835AUX=m
CONFIG_SPI_BCM63XX=y
CONFIG_SPI_BCM63XX_HSSPI=y
# CONFIG_SPI_BCM_QSPI is not set
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_CADENCE is not set
CONFIG_SPI_CADENCE_QUADSPI=m
CONFIG_SPI_CADENCE_XSPI=m
CONFIG_SPI_CLPS711X=m
# CONFIG_SPI_DESIGNWARE is not set
CONFIG_SPI_EP93XX=m
CONFIG_SPI_FSL_LPSPI=y
# CONFIG_SPI_FSL_QUADSPI is not set
# CONFIG_SPI_GXP is not set
CONFIG_SPI_HISI_KUNPENG=m
# CONFIG_SPI_HISI_SFC_V3XX is not set
CONFIG_SPI_NXP_FLEXSPI=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_IMG_SPFI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_INGENIC=m
CONFIG_SPI_INTEL=y
# CONFIG_SPI_INTEL_PCI is not set
CONFIG_SPI_INTEL_PLATFORM=y
CONFIG_SPI_JCORE=m
# CONFIG_SPI_LP8841_RTC is not set
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_FSL_DSPI=m
CONFIG_SPI_MESON_SPICC=m
CONFIG_SPI_MESON_SPIFC=y
CONFIG_SPI_MICROCHIP_CORE=y
# CONFIG_SPI_MT65XX is not set
CONFIG_SPI_MT7621=m
CONFIG_SPI_MTK_NOR=y
CONFIG_SPI_NPCM_FIU=y
CONFIG_SPI_NPCM_PSPI=y
# CONFIG_SPI_LANTIQ_SSC is not set
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_OMAP24XX is not set
CONFIG_SPI_TI_QSPI=m
# CONFIG_SPI_OMAP_100K is not set
CONFIG_SPI_ORION=m
# CONFIG_SPI_PIC32 is not set
# CONFIG_SPI_PIC32_SQI is not set
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
# CONFIG_SPI_ROCKCHIP is not set
CONFIG_SPI_ROCKCHIP_SFC=m
# CONFIG_SPI_RSPI is not set
CONFIG_SPI_QUP=m
CONFIG_SPI_QCOM_GENI=m
CONFIG_SPI_S3C64XX=m
CONFIG_SPI_SC18IS602=m
CONFIG_SPI_SH_MSIOF=y
# CONFIG_SPI_SH is not set
CONFIG_SPI_SH_HSPI=m
# CONFIG_SPI_SIFIVE is not set
CONFIG_SPI_SLAVE_MT27XX=m
CONFIG_SPI_SPRD=m
# CONFIG_SPI_SPRD_ADI is not set
CONFIG_SPI_STM32=m
CONFIG_SPI_STM32_QSPI=m
CONFIG_SPI_ST_SSC4=m
CONFIG_SPI_SUN4I=y
# CONFIG_SPI_SUN6I is not set
CONFIG_SPI_SUNPLUS_SP7021=y
# CONFIG_SPI_SYNQUACER is not set
CONFIG_SPI_MXIC=m
CONFIG_SPI_TEGRA210_QUAD=y
CONFIG_SPI_TEGRA114=y
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_UNIPHIER is not set
# CONFIG_SPI_XCOMM is not set
CONFIG_SPI_XILINX=y
# CONFIG_SPI_XLP is not set
CONFIG_SPI_XTENSA_XTFPGA=y
# CONFIG_SPI_ZYNQ_QSPI is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
CONFIG_SPI_AMD=y

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_LOOPBACK_TEST=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=m
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
CONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=m
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_AT91PIO4=y
# CONFIG_PINCTRL_AXP209 is not set
CONFIG_PINCTRL_BM1880=y
CONFIG_PINCTRL_DA850_PUPD=y
CONFIG_PINCTRL_DA9062=m
# CONFIG_PINCTRL_EQUILIBRIUM is not set
CONFIG_PINCTRL_INGENIC=y
# CONFIG_PINCTRL_LPC18XX is not set
CONFIG_PINCTRL_MCP23S08_I2C=y
CONFIG_PINCTRL_MCP23S08_SPI=y
CONFIG_PINCTRL_MCP23S08=y
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
CONFIG_PINCTRL_OCELOT=y
CONFIG_PINCTRL_PISTACHIO=y
CONFIG_PINCTRL_RK805=m
CONFIG_PINCTRL_ROCKCHIP=y
CONFIG_PINCTRL_SINGLE=m
# CONFIG_PINCTRL_STARFIVE is not set
CONFIG_PINCTRL_STMFX=m
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
CONFIG_PINCTRL_S700=y
# CONFIG_PINCTRL_S900 is not set
CONFIG_PINCTRL_ASPEED=y
CONFIG_PINCTRL_ASPEED_G4=y
# CONFIG_PINCTRL_ASPEED_G5 is not set
CONFIG_PINCTRL_ASPEED_G6=y
# CONFIG_PINCTRL_BCM281XX is not set
CONFIG_PINCTRL_BCM2835=m
CONFIG_PINCTRL_BCM4908=y
CONFIG_PINCTRL_BCM63XX=y
# CONFIG_PINCTRL_BCM6318 is not set
CONFIG_PINCTRL_BCM6328=y
# CONFIG_PINCTRL_BCM6358 is not set
CONFIG_PINCTRL_BCM6362=y
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
CONFIG_PINCTRL_IPROC_GPIO=y
CONFIG_PINCTRL_CYGNUS_MUX=y
# CONFIG_PINCTRL_NS is not set
CONFIG_PINCTRL_NSP_GPIO=y
# CONFIG_PINCTRL_NS2_MUX is not set
CONFIG_PINCTRL_NSP_MUX=y
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set

#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
# CONFIG_PINCTRL_MT2701 is not set
# CONFIG_PINCTRL_MT7623 is not set
CONFIG_PINCTRL_MT7629=y
# CONFIG_PINCTRL_MT8135 is not set
CONFIG_PINCTRL_MT8127=y
# CONFIG_PINCTRL_MT2712 is not set
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6779 is not set
# CONFIG_PINCTRL_MT6795 is not set
CONFIG_PINCTRL_MT6797=y
# CONFIG_PINCTRL_MT7622 is not set
CONFIG_PINCTRL_MT7986=y
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
CONFIG_PINCTRL_MT8186=y
# CONFIG_PINCTRL_MT8192 is not set
CONFIG_PINCTRL_MT8195=y
# CONFIG_PINCTRL_MT8365 is not set
CONFIG_PINCTRL_MT8516=y
# CONFIG_PINCTRL_MT6397 is not set
# end of MediaTek pinctrl drivers

CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_WPCM450=y
# CONFIG_PINCTRL_NPCM7XX is not set
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
CONFIG_PINCTRL_MSM=m
# CONFIG_PINCTRL_APQ8064 is not set
# CONFIG_PINCTRL_APQ8084 is not set
CONFIG_PINCTRL_IPQ4019=m
# CONFIG_PINCTRL_IPQ8064 is not set
CONFIG_PINCTRL_IPQ8074=m
CONFIG_PINCTRL_IPQ6018=m
CONFIG_PINCTRL_MSM8226=m
CONFIG_PINCTRL_MSM8660=m
# CONFIG_PINCTRL_MSM8960 is not set
CONFIG_PINCTRL_MDM9607=m
CONFIG_PINCTRL_MDM9615=m
CONFIG_PINCTRL_MSM8X74=m
# CONFIG_PINCTRL_MSM8909 is not set
# CONFIG_PINCTRL_MSM8916 is not set
CONFIG_PINCTRL_MSM8953=m
# CONFIG_PINCTRL_MSM8976 is not set
CONFIG_PINCTRL_MSM8994=m
# CONFIG_PINCTRL_MSM8996 is not set
CONFIG_PINCTRL_MSM8998=m
# CONFIG_PINCTRL_QCM2290 is not set
CONFIG_PINCTRL_QCS404=m
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_SC7180 is not set
# CONFIG_PINCTRL_SC7280 is not set
CONFIG_PINCTRL_SC7280_LPASS_LPI=m
# CONFIG_PINCTRL_SC8180X is not set
CONFIG_PINCTRL_SC8280XP=m
CONFIG_PINCTRL_SDM660=m
CONFIG_PINCTRL_SDM845=m
CONFIG_PINCTRL_SDX55=m
# CONFIG_PINCTRL_SM6115 is not set
CONFIG_PINCTRL_SM6125=m
CONFIG_PINCTRL_SM6350=m
CONFIG_PINCTRL_SM6375=m
# CONFIG_PINCTRL_SDX65 is not set
# CONFIG_PINCTRL_SM8150 is not set
CONFIG_PINCTRL_SM8250=m
# CONFIG_PINCTRL_SM8250_LPASS_LPI is not set
# CONFIG_PINCTRL_SM8350 is not set
CONFIG_PINCTRL_SM8450=m
CONFIG_PINCTRL_LPASS_LPI=m

#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
# CONFIG_PINCTRL_PFC_EMEV2 is not set
CONFIG_PINCTRL_PFC_R8A77995=y
CONFIG_PINCTRL_PFC_R8A7794=y
CONFIG_PINCTRL_PFC_R8A77990=y
CONFIG_PINCTRL_PFC_R8A7779=y
CONFIG_PINCTRL_PFC_R8A7790=y
# CONFIG_PINCTRL_PFC_R8A77950 is not set
CONFIG_PINCTRL_PFC_R8A77951=y
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
CONFIG_PINCTRL_PFC_R8A77965=y
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
CONFIG_PINCTRL_PFC_R8A779F0=y
CONFIG_PINCTRL_PFC_R8A7792=y
CONFIG_PINCTRL_PFC_R8A77980=y
# CONFIG_PINCTRL_PFC_R8A77970 is not set
CONFIG_PINCTRL_PFC_R8A779A0=y
CONFIG_PINCTRL_PFC_R8A779G0=y
# CONFIG_PINCTRL_PFC_R8A7740 is not set
CONFIG_PINCTRL_PFC_R8A73A4=y
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
CONFIG_PINCTRL_PFC_R8A7745=y
CONFIG_PINCTRL_PFC_R8A7742=y
CONFIG_PINCTRL_PFC_R8A7743=y
# CONFIG_PINCTRL_PFC_R8A7744 is not set
CONFIG_PINCTRL_PFC_R8A774C0=y
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
CONFIG_PINCTRL_PFC_R8A774A1=y
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
CONFIG_PINCTRL_RZN1=y
CONFIG_PINCTRL_RZV2M=y
CONFIG_PINCTRL_PFC_SH7203=y
CONFIG_PINCTRL_PFC_SH7264=y
# CONFIG_PINCTRL_PFC_SH7269 is not set
CONFIG_PINCTRL_PFC_SH7720=y
CONFIG_PINCTRL_PFC_SH7722=y
CONFIG_PINCTRL_PFC_SH7734=y
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
CONFIG_PINCTRL_PFC_SH73A0=y
# CONFIG_PINCTRL_PFC_SH7723 is not set
CONFIG_PINCTRL_PFC_SH7724=y
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers

CONFIG_PINCTRL_SAMSUNG=y
# CONFIG_PINCTRL_EXYNOS is not set
CONFIG_PINCTRL_S3C24XX=y
CONFIG_PINCTRL_S3C64XX=y
# CONFIG_PINCTRL_SPRD_SC9860 is not set
CONFIG_PINCTRL_STM32=y
CONFIG_PINCTRL_STM32F429=y
# CONFIG_PINCTRL_STM32F469 is not set
CONFIG_PINCTRL_STM32F746=y
# CONFIG_PINCTRL_STM32F769 is not set
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_PINCTRL_UNIPHIER=y
# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
CONFIG_PINCTRL_UNIPHIER_PXS2=y
# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
CONFIG_PINCTRL_UNIPHIER_LD11=y
CONFIG_PINCTRL_UNIPHIER_LD20=y
# CONFIG_PINCTRL_UNIPHIER_PXS3 is not set
# CONFIG_PINCTRL_UNIPHIER_NX1 is not set
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_CDEV is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
CONFIG_GPIO_ASPEED=y
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
CONFIG_GPIO_RASPBERRYPI_EXP=m
CONFIG_GPIO_BCM_KONA=y
CONFIG_GPIO_BCM_XGS_IPROC=m
CONFIG_GPIO_BRCMSTB=m
CONFIG_GPIO_CADENCE=y
CONFIG_GPIO_CLPS711X=y
CONFIG_GPIO_DWAPB=m
# CONFIG_GPIO_EIC_SPRD is not set
CONFIG_GPIO_EM=y
CONFIG_GPIO_FTGPIO010=y
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HISI is not set
# CONFIG_GPIO_HLWD is not set
CONFIG_GPIO_IOP=y
CONFIG_GPIO_LOGICVC=m
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
CONFIG_GPIO_MB86S7X=m
CONFIG_GPIO_MENZ127=m
CONFIG_GPIO_MPC8XXX=y
# CONFIG_GPIO_MT7621 is not set
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
CONFIG_GPIO_PMIC_EIC_SPRD=y
CONFIG_GPIO_PXA=y
CONFIG_GPIO_RCAR=m
CONFIG_GPIO_RDA=y
CONFIG_GPIO_ROCKCHIP=y
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=m
CONFIG_GPIO_SNPS_CREG=y
# CONFIG_GPIO_SPRD is not set
CONFIG_GPIO_STP_XWAY=y
CONFIG_GPIO_SYSCON=m
# CONFIG_GPIO_TEGRA is not set
CONFIG_GPIO_TEGRA186=y
CONFIG_GPIO_TS4800=m
# CONFIG_GPIO_UNIPHIER is not set
CONFIG_GPIO_VISCONTI=y
CONFIG_GPIO_VX855=y
CONFIG_GPIO_WCD934X=m
# CONFIG_GPIO_XGENE_SB is not set
CONFIG_GPIO_XILINX=m
CONFIG_GPIO_XLP=m
# CONFIG_GPIO_AMD_FCH is not set
CONFIG_GPIO_IDT3243X=m
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=m
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_TPIC2810=y
CONFIG_GPIO_TS4900=m
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=m
# CONFIG_GPIO_BD71815 is not set
# CONFIG_GPIO_BD71828 is not set
CONFIG_GPIO_BD9571MWV=m
# CONFIG_GPIO_DA9052 is not set
# CONFIG_GPIO_DA9055 is not set
# CONFIG_GPIO_JANZ_TTL is not set
CONFIG_GPIO_LP3943=m
CONFIG_GPIO_LP873X=m
# CONFIG_GPIO_LP87565 is not set
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SL28CPLD=y
# CONFIG_GPIO_STMPE is not set
# CONFIG_GPIO_TC3589X is not set
CONFIG_GPIO_TIMBERDALE=y
CONFIG_GPIO_TPS65086=m
# CONFIG_GPIO_TPS65910 is not set
# CONFIG_GPIO_TPS65912 is not set
# CONFIG_GPIO_TWL4030 is not set
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8994=m
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_PCH=m
# CONFIG_GPIO_PCI_IDIO_16 is not set
CONFIG_GPIO_PCIE_IDIO_24=m
CONFIG_GPIO_RDC321X=y
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=m
# CONFIG_GPIO_PISOSR is not set
CONFIG_GPIO_XRA1403=y
CONFIG_GPIO_MOXTET=m
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=m
# CONFIG_GPIO_MOCKUP is not set
CONFIG_GPIO_VIRTIO=m
CONFIG_GPIO_SIM=m
# end of Virtual GPIO drivers

CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_MXC=m
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=m
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=m
# CONFIG_W1_SLAVE_DS2406 is not set
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=m
CONFIG_W1_SLAVE_DS2430=m
CONFIG_W1_SLAVE_DS2431=m
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS250X=m
CONFIG_W1_SLAVE_DS2780=y
# CONFIG_W1_SLAVE_DS2781 is not set
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves

# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_POWER_SUPPLY_HWMON is not set
CONFIG_PDA_POWER=m
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_IP5XXX_POWER is not set
CONFIG_WM831X_BACKUP=m
# CONFIG_WM831X_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_CW2015=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_LEGO_EV3=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_INGENIC=m
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
# CONFIG_MANAGER_SBS is not set
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=m
CONFIG_BATTERY_BQ27XXX_HDQ=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
# CONFIG_BATTERY_DA9030 is not set
CONFIG_BATTERY_DA9052=m
CONFIG_CHARGER_DA9150=m
CONFIG_BATTERY_DA9150=m
CONFIG_AXP20X_POWER=m
CONFIG_BATTERY_MAX17040=y
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_BATTERY_MAX1721X is not set
CONFIG_BATTERY_TWL4030_MADC=m
CONFIG_BATTERY_RX51=m
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=y
# CONFIG_CHARGER_LTC4162L is not set
CONFIG_CHARGER_DETECTOR_MAX14656=y
CONFIG_CHARGER_MAX77976=m
CONFIG_CHARGER_MP2629=m
CONFIG_CHARGER_MT6360=m
CONFIG_CHARGER_QCOM_SMBB=m
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=m
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ2515X=m
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
CONFIG_CHARGER_SMB347=m
CONFIG_CHARGER_TPS65217=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_GOLDFISH=y
# CONFIG_BATTERY_RT5033 is not set
CONFIG_CHARGER_RT9455=m
CONFIG_CHARGER_SC2731=y
CONFIG_FUEL_GAUGE_SC27XX=m
CONFIG_CHARGER_UCS1002=m
# CONFIG_CHARGER_BD99954 is not set
CONFIG_BATTERY_ACER_A500=m
CONFIG_BATTERY_UG3105=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=m
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
CONFIG_SENSORS_AS370=y
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_AXI_FAN_CONTROL=m
CONFIG_SENSORS_ARM_SCMI=m
CONFIG_SENSORS_ARM_SCPI=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ASPEED=m
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_BT1_PVT=m
# CONFIG_SENSORS_BT1_PVT_ALARMS is not set
CONFIG_SENSORS_CORSAIR_CPRO=m
CONFIG_SENSORS_CORSAIR_PSU=y
CONFIG_SENSORS_DRIVETEMP=m
CONFIG_SENSORS_DS620=y
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DA9052_ADC=m
# CONFIG_SENSORS_DA9055 is not set
CONFIG_SENSORS_I5K_AMB=m
# CONFIG_SENSORS_SPARX5 is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_MC13783_ADC is not set
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GPIO_FAN=m
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LAN966X=y
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
CONFIG_SENSORS_LTC2947_SPI=m
CONFIG_SENSORS_LTC2990=m
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4260=y
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX127=m
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=y
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX31722=y
CONFIG_SENSORS_MAX31730=m
CONFIG_SENSORS_MAX6620=m
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_TC654=m
# CONFIG_SENSORS_TPS23861 is not set
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_MR75203=m
CONFIG_SENSORS_ADCXX=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT6775_I2C=m
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_NPCM7XX=y
# CONFIG_SENSORS_NSA320 is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
CONFIG_SENSORS_NZXT_SMART2=m
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_SENSORS_PECI_CPUTEMP=m
CONFIG_SENSORS_PECI_DIMMTEMP=m
CONFIG_SENSORS_PECI=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1266=m
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_BPA_RS600 is not set
CONFIG_SENSORS_DELTA_AHE50DC_FAN=m
CONFIG_SENSORS_FSP_3Y=m
CONFIG_SENSORS_IBM_CFFPS=m
# CONFIG_SENSORS_DPS920AB is not set
CONFIG_SENSORS_INSPUR_IPSPS=m
# CONFIG_SENSORS_IR35221 is not set
CONFIG_SENSORS_IR36021=m
CONFIG_SENSORS_IR38064=m
# CONFIG_SENSORS_IR38064_REGULATOR is not set
# CONFIG_SENSORS_IRPS5401 is not set
CONFIG_SENSORS_ISL68137=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LM25066_REGULATOR=y
CONFIG_SENSORS_LT7182S=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
# CONFIG_SENSORS_LTC3815 is not set
# CONFIG_SENSORS_MAX15301 is not set
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX16601=m
CONFIG_SENSORS_MAX20730=m
CONFIG_SENSORS_MAX20751=m
CONFIG_SENSORS_MAX31785=m
CONFIG_SENSORS_MAX34440=m
# CONFIG_SENSORS_MAX8688 is not set
CONFIG_SENSORS_MP2888=m
CONFIG_SENSORS_MP2975=m
CONFIG_SENSORS_MP5023=m
CONFIG_SENSORS_PIM4328=m
CONFIG_SENSORS_PLI1209BC=m
CONFIG_SENSORS_PLI1209BC_REGULATOR=y
# CONFIG_SENSORS_PM6764TR is not set
CONFIG_SENSORS_PXE1610=m
CONFIG_SENSORS_Q54SJ108A2=m
CONFIG_SENSORS_STPDDC60=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_TPS53679=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_XDPE152=m
CONFIG_SENSORS_XDPE122=m
CONFIG_SENSORS_XDPE122_REGULATOR=y
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
CONFIG_SENSORS_SL28CPLD=m
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SY7636A=m
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_EMC1403 is not set
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=y
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_STTS751=y
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_ADS7871=m
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA238=y
CONFIG_SENSORS_INA3221=m
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=y
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM831X=m
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_CPU_THERMAL is not set
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
# CONFIG_HISI_THERMAL is not set
CONFIG_IMX_THERMAL=m
CONFIG_IMX8MM_THERMAL=y
CONFIG_K3_THERMAL=m
CONFIG_QORIQ_THERMAL=y
CONFIG_SPEAR_THERMAL=y
CONFIG_SUN8I_THERMAL=m
# CONFIG_ROCKCHIP_THERMAL is not set
CONFIG_RCAR_THERMAL=m
CONFIG_RCAR_GEN3_THERMAL=y
# CONFIG_RZG2L_THERMAL is not set
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_DOVE_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_DA9062_THERMAL=m
CONFIG_MTK_THERMAL=y

#
# Intel thermal drivers
#

#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers

#
# Broadcom thermal drivers
#
CONFIG_BCM2711_THERMAL=m
# CONFIG_BCM2835_THERMAL is not set
# CONFIG_BRCMSTB_THERMAL is not set
CONFIG_BCM_NS_THERMAL=m
CONFIG_BCM_SR_THERMAL=m
# end of Broadcom thermal drivers

#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=m
CONFIG_TI_THERMAL=y
# CONFIG_OMAP3_THERMAL is not set
CONFIG_OMAP4_THERMAL=y
# CONFIG_OMAP5_THERMAL is not set
CONFIG_DRA752_THERMAL=y
# end of Texas Instruments thermal drivers

#
# Samsung thermal drivers
#
CONFIG_EXYNOS_THERMAL=y
# end of Samsung thermal drivers

#
# NVIDIA Tegra thermal drivers
#
CONFIG_TEGRA_SOCTHERM=m
CONFIG_TEGRA_BPMP_THERMAL=m
# CONFIG_TEGRA30_TSENSOR is not set
# end of NVIDIA Tegra thermal drivers

# CONFIG_GENERIC_ADC_THERMAL is not set

#
# Qualcomm thermal drivers
#
# CONFIG_QCOM_TSENS is not set
# end of Qualcomm thermal drivers

CONFIG_UNIPHIER_THERMAL=m
# CONFIG_SPRD_THERMAL is not set
CONFIG_KHADAS_MCU_FAN_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_SSB_DRIVER_PCICORE is not set
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
# CONFIG_BCMA_HOST_SOC is not set
# CONFIG_BCMA_DRIVER_PCI is not set
# CONFIG_BCMA_DRIVER_MIPS is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_SUN4I_GPADC=m
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_AT91_USART=y
CONFIG_MFD_ATMEL_FLEXCOM=m
# CONFIG_MFD_ATMEL_HLCDC is not set
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_BD9571MWV=m
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_ASIC3 is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=m
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=m
# CONFIG_MFD_DLN2 is not set
CONFIG_MFD_ENE_KB3930=m
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_SPI=m
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_MFD_MP2629=m
CONFIG_MFD_MXS_LRADC=m
CONFIG_MFD_MX25_TSADC=y
# CONFIG_MFD_HI6421_PMIC is not set
CONFIG_MFD_HI655X_PMIC=m
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=y
CONFIG_MFD_IQS62X=m
CONFIG_MFD_JANZ_CMODIO=y
# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=m
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
CONFIG_MFD_MAX77686=m
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
CONFIG_MFD_MAX77843=y
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=m
CONFIG_MFD_MT6397=m
CONFIG_MFD_MENF21BMC=m
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
CONFIG_MFD_VIPERBOARD=y
# CONFIG_MFD_NTXEC is not set
CONFIG_MFD_RETU=y
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8XXX is not set
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RT4831=y
CONFIG_MFD_RT5033=m
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=m
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=m
# CONFIG_MFD_SL28CPLD is not set
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
CONFIG_MFD_SC27XX_PMIC=y
CONFIG_ABX500_CORE=y
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
CONFIG_STMPE_SPI=y
# end of STMicroelectronics STMPE Interface Drivers

# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=m
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
CONFIG_MFD_TPS65086=y
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=m
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=m
CONFIG_MFD_TPS65912_I2C=m
CONFIG_MFD_TPS65912_SPI=m
CONFIG_TWL4030_CORE=y
# CONFIG_MFD_TWL4030_AUDIO is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
CONFIG_MFD_TIMBERDALE=m
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=m
CONFIG_MFD_VX855=y
# CONFIG_MFD_LOCHNAGAR is not set
CONFIG_MFD_ARIZONA=m
CONFIG_MFD_ARIZONA_I2C=m
# CONFIG_MFD_ARIZONA_SPI is not set
CONFIG_MFD_CS47L24=y
# CONFIG_MFD_WM5102 is not set
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=m
CONFIG_MFD_STW481X=y
CONFIG_MFD_ROHM_BD718XX=m
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
CONFIG_MFD_STM32_LPTIMER=y
CONFIG_MFD_STM32_TIMERS=m
# CONFIG_MFD_STPMIC1 is not set
CONFIG_MFD_STMFX=m
CONFIG_MFD_WCD934X=m
# CONFIG_MFD_ATC260X_I2C is not set
CONFIG_MFD_KHADAS_MCU=y
CONFIG_MFD_ACER_A500_EC=m
CONFIG_MFD_QCOM_PM8008=y
# CONFIG_RAVE_SP_CORE is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# CONFIG_MFD_RSMU_I2C is not set
CONFIG_MFD_RSMU_SPI=m
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_88PG86X=m
# CONFIG_REGULATOR_88PM800 is not set
CONFIG_REGULATOR_88PM8607=m
CONFIG_REGULATOR_ACT8865=y
# CONFIG_REGULATOR_ACT8945A is not set
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ANATOP=m
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARM_SCMI=y
# CONFIG_REGULATOR_AXP20X is not set
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_BD71815=m
CONFIG_REGULATOR_BD71828=y
CONFIG_REGULATOR_BD718XX=m
CONFIG_REGULATOR_BD9571MWV=m
CONFIG_REGULATOR_BD957XMUF=y
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_DA9055=m
CONFIG_REGULATOR_DA9062=m
# CONFIG_REGULATOR_DA9063 is not set
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_FAN53880 is not set
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_HI655X is not set
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_LP87565 is not set
CONFIG_REGULATOR_LTC3589=m
CONFIG_REGULATOR_LTC3676=m
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX77620=m
# CONFIG_REGULATOR_MAX77650 is not set
CONFIG_REGULATOR_MAX8649=y
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8973=y
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX20086 is not set
CONFIG_REGULATOR_MAX77686=m
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=m
# CONFIG_REGULATOR_MC13783 is not set
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=m
# CONFIG_REGULATOR_MP8859 is not set
CONFIG_REGULATOR_MP886X=y
# CONFIG_REGULATOR_MPQ7920 is not set
CONFIG_REGULATOR_MT6311=m
CONFIG_REGULATOR_MT6323=m
CONFIG_REGULATOR_MT6358=m
CONFIG_REGULATOR_MT6359=m
CONFIG_REGULATOR_MT6360=m
CONFIG_REGULATOR_MT6380=m
CONFIG_REGULATOR_MT6397=m
CONFIG_REGULATOR_PBIAS=y
# CONFIG_REGULATOR_PCA9450 is not set
CONFIG_REGULATOR_PF8X00=m
CONFIG_REGULATOR_PFUZE100=m
# CONFIG_REGULATOR_PV88060 is not set
CONFIG_REGULATOR_PV88080=m
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_RPMH=m
CONFIG_REGULATOR_QCOM_SMD_RPM=m
# CONFIG_REGULATOR_QCOM_SPMI is not set
CONFIG_REGULATOR_QCOM_USB_VBUS=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=m
CONFIG_REGULATOR_RC5T583=m
CONFIG_REGULATOR_RK808=m
CONFIG_REGULATOR_ROHM=y
# CONFIG_REGULATOR_RT4801 is not set
CONFIG_REGULATOR_RT4831=y
CONFIG_REGULATOR_RT5033=m
CONFIG_REGULATOR_RT5190A=m
# CONFIG_REGULATOR_RT5759 is not set
CONFIG_REGULATOR_RT6160=m
CONFIG_REGULATOR_RT6245=y
# CONFIG_REGULATOR_RTQ2134 is not set
CONFIG_REGULATOR_RTMV20=m
CONFIG_REGULATOR_RTQ6752=m
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SC2731=m
# CONFIG_REGULATOR_SLG51000 is not set
CONFIG_REGULATOR_STM32_BOOSTER=y
CONFIG_REGULATOR_STM32_VREFBUF=y
# CONFIG_REGULATOR_STM32_PWR is not set
CONFIG_REGULATOR_TI_ABB=m
# CONFIG_REGULATOR_STW481X_VMMC is not set
CONFIG_REGULATOR_SY7636A=y
CONFIG_REGULATOR_SY8106A=m
CONFIG_REGULATOR_SY8824X=y
# CONFIG_REGULATOR_SY8827N is not set
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS6286X=y
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_TPS65086=m
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS65217=m
CONFIG_REGULATOR_TPS6524X=m
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TPS68470 is not set
CONFIG_REGULATOR_TWL4030=m
CONFIG_REGULATOR_UNIPHIER=y
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8994=m
# CONFIG_REGULATOR_QCOM_LABIBB is not set
CONFIG_RC_CORE=y
# CONFIG_LIRC is not set
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_JVC_DECODER=m
# CONFIG_IR_MCE_KBD_DECODER is not set
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=m
# CONFIG_IR_RC6_DECODER is not set
CONFIG_IR_RCMM_DECODER=y
# CONFIG_IR_SANYO_DECODER is not set
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
# CONFIG_IR_ENE is not set
# CONFIG_IR_FINTEK is not set
CONFIG_IR_GPIO_CIR=m
# CONFIG_IR_HIX5HD2 is not set
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_IMON=m
# CONFIG_IR_IMON_RAW is not set
CONFIG_IR_ITE_CIR=y
CONFIG_IR_MCEUSB=m
CONFIG_IR_MESON=m
CONFIG_IR_MESON_TX=y
CONFIG_IR_MTK=y
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=y
CONFIG_IR_RX51=m
# CONFIG_IR_SERIAL is not set
CONFIG_IR_STREAMZAP=y
CONFIG_IR_SUNXI=y
# CONFIG_IR_TOY is not set
CONFIG_IR_TTUSBIR=y
CONFIG_IR_WINBOND_CIR=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_RC_LOOPBACK=y
CONFIG_RC_ST=y
CONFIG_RC_XBOX_DVD=m
CONFIG_IR_IMG=y
CONFIG_IR_IMG_RAW=y
# CONFIG_IR_IMG_HW is not set
CONFIG_CEC_CORE=y

#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=y
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

#
# Media device types
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
# CONFIG_MEDIA_TEST_SUPPORT is not set
# end of Media device types

CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
# end of Video4Linux options

#
# Media controller options
#
# end of Media controller options

#
# Media drivers
#

#
# Drivers filtered as selected at 'Filter media drivers'
#

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
CONFIG_MEDIA_PCI_SUPPORT=y
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_MEDIA_PLATFORM_DRIVERS=y
# CONFIG_V4L_PLATFORM_DRIVERS is not set
CONFIG_SDR_PLATFORM_DRIVERS=y
# CONFIG_V4L_MEM2MEM_DRIVERS is not set

#
# Allegro DVT media platform drivers
#

#
# Amlogic media platform drivers
#

#
# Amphion drivers
#

#
# Aspeed media platform drivers
#

#
# Atmel media platform drivers
#

#
# Cadence media platform drivers
#
# CONFIG_VIDEO_CADENCE_CSI2RX is not set
CONFIG_VIDEO_CADENCE_CSI2TX=m

#
# Chips&Media media platform drivers
#

#
# Intel media platform drivers
#

#
# Marvell media platform drivers
#

#
# Mediatek media platform drivers
#

#
# NVidia media platform drivers
#

#
# NXP media platform drivers
#
CONFIG_VIDEO_IMX_MIPI_CSIS=m

#
# Qualcomm media platform drivers
#

#
# Renesas media platform drivers
#
CONFIG_VIDEO_RCAR_DRIF=y

#
# Rockchip media platform drivers
#

#
# Samsung media platform drivers
#

#
# STMicroelectronics media platform drivers
#

#
# Sunxi media platform drivers
#

#
# Texas Instruments drivers
#

#
# VIA media platform drivers
#

#
# Xilinx media platform drivers
#
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=m
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_CS3308 is not set
CONFIG_VIDEO_CS5345=y
# CONFIG_VIDEO_CS53L32A is not set
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_SONY_BTF_MPX is not set
CONFIG_VIDEO_TDA7432=y
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
CONFIG_VIDEO_TEA6420=y
CONFIG_VIDEO_TLV320AIC23B=y
# CONFIG_VIDEO_TVAUDIO is not set
CONFIG_VIDEO_UDA1342=y
# CONFIG_VIDEO_VP27SMPX is not set
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_WM8775=m
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
# end of RDS decoders

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
CONFIG_VIDEO_ADV7183=y
CONFIG_VIDEO_ADV748X=m
CONFIG_VIDEO_ADV7604=y
CONFIG_VIDEO_ADV7604_CEC=y
CONFIG_VIDEO_ADV7842=m
# CONFIG_VIDEO_ADV7842_CEC is not set
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=m
# CONFIG_VIDEO_ISL7998X is not set
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_MAX9286=m
CONFIG_VIDEO_ML86V7667=m
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=y
CONFIG_VIDEO_TW9906=m
CONFIG_VIDEO_TW9910=y
CONFIG_VIDEO_VPX3220=y

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
CONFIG_VIDEO_CX25840=m
# end of Video decoders

#
# Video encoders
#
CONFIG_VIDEO_AD9389B=y
# CONFIG_VIDEO_ADV7170 is not set
CONFIG_VIDEO_ADV7175=m
# CONFIG_VIDEO_ADV7343 is not set
CONFIG_VIDEO_ADV7393=y
CONFIG_VIDEO_ADV7511=y
CONFIG_VIDEO_ADV7511_CEC=y
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_SAA7127 is not set
CONFIG_VIDEO_SAA7185=y
CONFIG_VIDEO_THS8200=m
# end of Video encoders

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=y
# end of Video improvement chips

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
# end of Audio/Video compression chips

#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=y
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_I2C is not set
# CONFIG_VIDEO_M52790 is not set
CONFIG_VIDEO_ST_MIPID02=m
# CONFIG_VIDEO_THS7303 is not set
# end of Miscellaneous helper chips

#
# Media SPI Adapters
#
CONFIG_VIDEO_GS1662=m
# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_E4000 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_FC2580=y
# CONFIG_MEDIA_TUNER_IT913X is not set
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MSI001=y
# CONFIG_MEDIA_TUNER_MT2060 is not set
CONFIG_MEDIA_TUNER_MT2063=y
# CONFIG_MEDIA_TUNER_MT20XX is not set
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_R820T=m
# CONFIG_MEDIA_TUNER_SI2157 is not set
# CONFIG_MEDIA_TUNER_SIMPLE is not set
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_TDA18218=m
# CONFIG_MEDIA_TUNER_TDA18250 is not set
# CONFIG_MEDIA_TUNER_TDA18271 is not set
CONFIG_MEDIA_TUNER_TDA827X=m
# CONFIG_MEDIA_TUNER_TDA8290 is not set
CONFIG_MEDIA_TUNER_TDA9887=m
# CONFIG_MEDIA_TUNER_TEA5761 is not set
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_XC2028=m
# CONFIG_MEDIA_TUNER_XC4000 is not set
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
# CONFIG_IMX_IPUV3_CORE is not set
CONFIG_DRM=m
CONFIG_DRM_MIPI_DBI=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DEBUG_SELFTEST=m
CONFIG_DRM_KUNIT_TEST=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=m
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_BUDDY=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_CMA_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
CONFIG_DRM_SCHED=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
CONFIG_DRM_HDLCD=m
CONFIG_DRM_HDLCD_SHOW_UNDERRUN=y
# CONFIG_DRM_MALI_DISPLAY is not set
CONFIG_DRM_KOMEDA=m
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_NOUVEAU_DEBUG_MMU=y
CONFIG_NOUVEAU_DEBUG_PUSH=y
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_KMB_DISPLAY=m
CONFIG_DRM_VGEM=m
CONFIG_DRM_VKMS=m
# CONFIG_DRM_EXYNOS is not set
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_USE_LVDS is not set
CONFIG_DRM_RCAR_MIPI_DSI=m
# CONFIG_DRM_SUN4I is not set
CONFIG_DRM_QXL=m
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_PANEL_ABT_Y030XX067A=m
CONFIG_DRM_PANEL_ARM_VERSATILE=m
# CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=m
CONFIG_DRM_PANEL_BOE_HIMAX8279D=m
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
CONFIG_DRM_PANEL_DSI_CM=m
CONFIG_DRM_PANEL_LVDS=m
CONFIG_DRM_PANEL_EBBG_FT8719=m
# CONFIG_DRM_PANEL_ELIDA_KD35T133 is not set
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=m
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=m
CONFIG_DRM_PANEL_ILITEK_IL9322=m
CONFIG_DRM_PANEL_ILITEK_ILI9341=m
CONFIG_DRM_PANEL_ILITEK_ILI9881C=m
CONFIG_DRM_PANEL_INNOLUX_EJ030NA=m
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=m
# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
# CONFIG_DRM_PANEL_JDI_R63452 is not set
# CONFIG_DRM_PANEL_KHADAS_TS050 is not set
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=m
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=m
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=m
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
CONFIG_DRM_PANEL_LG_LB035Q02=m
# CONFIG_DRM_PANEL_LG_LG4573 is not set
CONFIG_DRM_PANEL_NEC_NL8048HL11=m
CONFIG_DRM_PANEL_NEWVISION_NV3052C=m
CONFIG_DRM_PANEL_NOVATEK_NT35510=m
# CONFIG_DRM_PANEL_NOVATEK_NT35560 is not set
# CONFIG_DRM_PANEL_NOVATEK_NT35950 is not set
CONFIG_DRM_PANEL_NOVATEK_NT36672A=m
CONFIG_DRM_PANEL_NOVATEK_NT39016=m
# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=m
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set
# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
CONFIG_DRM_PANEL_SAMSUNG_DB7430=m
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=m
CONFIG_DRM_PANEL_SAMSUNG_S6D27A1=m
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=m
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_SPI is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=m
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
# CONFIG_DRM_PANEL_SAMSUNG_SOFEF00 is not set
CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_PANEL_SHARP_LS060T1SX01=m
CONFIG_DRM_PANEL_SITRONIX_ST7701=m
CONFIG_DRM_PANEL_SITRONIX_ST7703=m
CONFIG_DRM_PANEL_SITRONIX_ST7789V=m
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=m
CONFIG_DRM_PANEL_TDO_TL070WSH30=m
# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set
CONFIG_DRM_PANEL_TPO_TD043MTEA1=m
CONFIG_DRM_PANEL_TPO_TPG110=m
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
# CONFIG_DRM_PANEL_VISIONOX_RM69299 is not set
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_CDNS_DSI is not set
CONFIG_DRM_CHIPONE_ICN6211=m
# CONFIG_DRM_CHRONTEL_CH7033 is not set
CONFIG_DRM_CROS_EC_ANX7688=m
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_DRM_FSL_LDB=m
CONFIG_DRM_ITE_IT6505=m
CONFIG_DRM_LONTIUM_LT8912B=m
CONFIG_DRM_LONTIUM_LT9211=m
CONFIG_DRM_LONTIUM_LT9611=m
CONFIG_DRM_LONTIUM_LT9611UXC=m
CONFIG_DRM_ITE_IT66121=m
# CONFIG_DRM_LVDS_CODEC is not set
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=m
# CONFIG_DRM_NWL_MIPI_DSI is not set
CONFIG_DRM_NXP_PTN3460=m
# CONFIG_DRM_PARADE_PS8622 is not set
CONFIG_DRM_PARADE_PS8640=m
CONFIG_DRM_SIL_SII8620=m
CONFIG_DRM_SII902X=m
CONFIG_DRM_SII9234=m
CONFIG_DRM_SIMPLE_BRIDGE=m
# CONFIG_DRM_THINE_THC63LVD1024 is not set
CONFIG_DRM_TOSHIBA_TC358762=m
# CONFIG_DRM_TOSHIBA_TC358764 is not set
CONFIG_DRM_TOSHIBA_TC358767=m
# CONFIG_DRM_TOSHIBA_TC358768 is not set
CONFIG_DRM_TOSHIBA_TC358775=m
CONFIG_DRM_TI_DLPC3433=m
# CONFIG_DRM_TI_TFP410 is not set
CONFIG_DRM_TI_SN65DSI83=m
# CONFIG_DRM_TI_SN65DSI86 is not set
CONFIG_DRM_TI_TPD12S015=m
CONFIG_DRM_ANALOGIX_ANX6345=m
CONFIG_DRM_ANALOGIX_ANX78XX=m
CONFIG_DRM_ANALOGIX_DP=m
CONFIG_DRM_ANALOGIX_ANX7625=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_ADV7511_CEC=y
# CONFIG_DRM_CDNS_MHDP8546 is not set
CONFIG_DRM_IMX8QM_LDB=m
CONFIG_DRM_IMX8QXP_LDB=m
CONFIG_DRM_IMX8QXP_PIXEL_COMBINER=m
CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI=m
# end of Display Interface Bridges

# CONFIG_DRM_V3D is not set
CONFIG_DRM_ETNAVIV=m
# CONFIG_DRM_ETNAVIV_THERMAL is not set
CONFIG_DRM_HISI_HIBMC=m
CONFIG_DRM_LOGICVC=m
CONFIG_DRM_MXS=y
# CONFIG_DRM_MXSFB is not set
CONFIG_DRM_IMX_LCDIF=m
CONFIG_DRM_ARCPGU=m
CONFIG_DRM_BOCHS=m
# CONFIG_DRM_CIRRUS_QEMU is not set
CONFIG_DRM_GM12U320=m
CONFIG_DRM_PANEL_MIPI_DBI=m
CONFIG_DRM_SIMPLEDRM=m
# CONFIG_TINYDRM_HX8357D is not set
CONFIG_TINYDRM_ILI9163=m
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
CONFIG_TINYDRM_ILI9486=m
CONFIG_TINYDRM_MI0283QT=m
CONFIG_TINYDRM_REPAPER=m
CONFIG_TINYDRM_ST7586=m
# CONFIG_TINYDRM_ST7735R is not set
CONFIG_DRM_PL111=m
CONFIG_DRM_LIMA=m
CONFIG_DRM_ASPEED_GFX=m
CONFIG_DRM_TIDSS=m
CONFIG_DRM_GUD=m
CONFIG_DRM_SSD130X=m
# CONFIG_DRM_SSD130X_I2C is not set
CONFIG_DRM_SSD130X_SPI=m
# CONFIG_DRM_SPRD is not set
CONFIG_DRM_LEGACY=y
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=m
CONFIG_DRM_EXPORT_FOR_TESTS=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_LIB_RANDOM=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
# CONFIG_FB is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
# CONFIG_LCD_TDO24M is not set
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_AMS369FG06=m
CONFIG_LCD_LMS501KF03=y
CONFIG_LCD_HX8357=m
CONFIG_LCD_OTM3225A=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_KTD253 is not set
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_OMAP1=m
CONFIG_BACKLIGHT_PWM=m
# CONFIG_BACKLIGHT_DA903X is not set
# CONFIG_BACKLIGHT_DA9052 is not set
CONFIG_BACKLIGHT_QCOM_WLED=m
# CONFIG_BACKLIGHT_RT4831 is not set
CONFIG_BACKLIGHT_WM831X=m
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=m
# CONFIG_BACKLIGHT_88PM860X is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_PANDORA is not set
CONFIG_BACKLIGHT_TPS65217=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=m
# CONFIG_BACKLIGHT_LED is not set
# end of Backlight & LCD device support

CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
# end of Graphics support

CONFIG_SOUND=y
# CONFIG_SND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
CONFIG_UHID=y
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=m
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
CONFIG_HID_BETOP_FF=m
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=y
CONFIG_HID_CORSAIR=y
# CONFIG_HID_COUGAR is not set
CONFIG_HID_MACALLY=m
CONFIG_HID_CMEDIA=m
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EZKEY=y
CONFIG_HID_GEMBIRD=y
# CONFIG_HID_GFRM is not set
CONFIG_HID_GLORIOUS=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_VIVALDI=y
CONFIG_HID_GT683R=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=m
CONFIG_HID_VIEWSONIC=m
CONFIG_HID_XIAOMI=y
CONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=y
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=y
CONFIG_HID_LETSKETCH=y
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_HIDPP is not set
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=m
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_MEGAWORLD_FF=y
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=m
# CONFIG_NINTENDO_FF is not set
CONFIG_HID_NTI=y
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PLAYSTATION is not set
# CONFIG_HID_RAZER is not set
CONFIG_HID_PRIMAX=m
CONFIG_HID_RETRODE=m
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=y
# CONFIG_HID_SEMITEK is not set
CONFIG_HID_SIGMAMICRO=y
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
# CONFIG_HID_GREENASIA is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_U2FZERO=m
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
CONFIG_HID_MCP2221=y
CONFIG_HID_KUNIT_TEST=y
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support

#
# I2C HID support
#
CONFIG_I2C_HID_OF=y
# CONFIG_I2C_HID_OF_ELAN is not set
CONFIG_I2C_HID_OF_GOODIX=y
# end of I2C HID support

CONFIG_I2C_HID_CORE=y

#
# Intel ISH HID support
#
# end of Intel ISH HID support

#
# AMD SFH HID Support
#
CONFIG_AMD_SFH_HID=m
# end of AMD SFH HID Support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=m
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
CONFIG_USB_FEW_INIT_RETRIES=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG_PRODUCTLIST=y
CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
# CONFIG_USB_MON is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_XHCI_HISTB=y
CONFIG_USB_XHCI_MTK=y
# CONFIG_USB_XHCI_MVEBU is not set
CONFIG_USB_XHCI_RCAR=m
CONFIG_USB_EHCI_BRCMSTB=m
CONFIG_USB_BRCMSTB=m
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_NPCM7XX is not set
# CONFIG_USB_EHCI_HCD_OMAP is not set
CONFIG_USB_EHCI_HCD_ORION=y
CONFIG_USB_EHCI_HCD_SPEAR=y
CONFIG_USB_EHCI_HCD_STI=y
# CONFIG_USB_EHCI_HCD_AT91 is not set
# CONFIG_USB_EHCI_SH is not set
# CONFIG_USB_EHCI_EXYNOS is not set
# CONFIG_USB_EHCI_MV is not set
CONFIG_USB_CNS3XXX_EHCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_FOTG210_HCD=m
CONFIG_USB_MAX3421_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_RENESAS_USBHS_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
CONFIG_USB_HCD_TEST_MODE=y
CONFIG_USB_RENESAS_USBHS=m

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
CONFIG_USB_STORAGE_DATAFAB=m
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_ONETOUCH=m
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=m
# CONFIG_USB_CDNS_SUPPORT is not set
CONFIG_USB_MTU3=m
# CONFIG_USB_MTU3_HOST is not set
# CONFIG_USB_MTU3_GADGET is not set
CONFIG_USB_MTU3_DUAL_ROLE=y
CONFIG_USB_MTU3_DEBUG=y
CONFIG_USB_MUSB_HDRC=m
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y

#
# Platform Glue Layer
#
CONFIG_USB_MUSB_TUSB6010=m
# CONFIG_USB_MUSB_DSPS is not set
CONFIG_USB_MUSB_UX500=m
CONFIG_USB_MUSB_MEDIATEK=m
CONFIG_USB_MUSB_POLARFIRE_SOC=m

#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_UX500_DMA is not set
# CONFIG_USB_INVENTRA_DMA is not set
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_HOST=y

#
# Platform Glue Driver Support
#
# CONFIG_USB_DWC3_OMAP is not set
CONFIG_USB_DWC3_EXYNOS=m
CONFIG_USB_DWC3_HAPS=m
CONFIG_USB_DWC3_KEYSTONE=y
# CONFIG_USB_DWC3_MESON_G12A is not set
# CONFIG_USB_DWC3_OF_SIMPLE is not set
# CONFIG_USB_DWC3_ST is not set
CONFIG_USB_DWC3_QCOM=m
CONFIG_USB_DWC3_IMX8MP=y
CONFIG_USB_DWC3_AM62=y
CONFIG_USB_DWC2=m
# CONFIG_USB_DWC2_HOST is not set

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
CONFIG_USB_DWC2_PCI=m
# CONFIG_USB_DWC2_DEBUG is not set
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
CONFIG_USB_CHIPIDEA=m
# CONFIG_USB_CHIPIDEA_UDC is not set
# CONFIG_USB_CHIPIDEA_HOST is not set
CONFIG_USB_CHIPIDEA_PCI=m
CONFIG_USB_CHIPIDEA_MSM=m
CONFIG_USB_CHIPIDEA_IMX=m
CONFIG_USB_CHIPIDEA_GENERIC=m
CONFIG_USB_CHIPIDEA_TEGRA=m
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_F8153X=m
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_METRO=m
# CONFIG_USB_SERIAL_MOS7720 is not set
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_SERIAL_OPTICON=m
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not set
CONFIG_USB_SERIAL_XR=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=m
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_QCOM_EUD is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=y
# CONFIG_BRCM_USB_PINMAP is not set
# CONFIG_USB_ONBOARD_HUB is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_KEYSTONE_USB_PHY=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_AM335X_CONTROL_USB=m
CONFIG_AM335X_PHY_USB=m
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_TAHVO_USB=m
# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set
CONFIG_USB_ISP1301=y
CONFIG_USB_TEGRA_PHY=y
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
# CONFIG_JZ4770_PHY is not set
# end of USB Physical Layer drivers

CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_VERBOSE=y
CONFIG_USB_GADGET_DEBUG_FILES=y
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y

#
# USB Peripheral Controller
#
# CONFIG_USB_LPC32XX is not set
CONFIG_USB_FUSB300=m
# CONFIG_USB_FOTG210_UDC is not set
CONFIG_USB_GR_UDC=m
# CONFIG_USB_R8A66597 is not set
CONFIG_USB_RENESAS_USBHS_UDC=m
# CONFIG_USB_RENESAS_USB3 is not set
CONFIG_USB_PXA27X=m
# CONFIG_USB_MV_UDC is not set
CONFIG_USB_MV_U3D=m
CONFIG_USB_SNP_CORE=m
CONFIG_USB_SNP_UDC_PLAT=m
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
CONFIG_USB_AMD5536UDC=m
# CONFIG_USB_NET2272 is not set
CONFIG_USB_NET2280=m
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
CONFIG_USB_GADGET_XILINX=m
CONFIG_USB_MAX3420_UDC=m
CONFIG_USB_ASPEED_UDC=m
CONFIG_USB_ASPEED_VHUB=m
# CONFIG_USB_DUMMY_HCD is not set
# end of USB Peripheral Controller

CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_UVC=m
CONFIG_USB_F_HID=m
CONFIG_USB_F_PRINTER=m
# CONFIG_USB_CONFIGFS is not set

#
# USB Gadget precomposed configurations
#
# CONFIG_USB_ZERO is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
CONFIG_USB_G_PRINTER=m
CONFIG_USB_G_ACM_MS=m
CONFIG_USB_G_HID=m
# CONFIG_USB_G_DBGP is not set
CONFIG_USB_G_WEBCAM=m
CONFIG_USB_RAW_GADGET=m
# end of USB Gadget precomposed configurations

# CONFIG_TYPEC is not set
CONFIG_USB_ROLE_SWITCH=y
# CONFIG_MMC is not set
CONFIG_SCSI_UFSHCD=m
# CONFIG_SCSI_UFS_BSG is not set
# CONFIG_SCSI_UFS_CRYPTO is not set
CONFIG_SCSI_UFS_HPB=y
CONFIG_SCSI_UFS_FAULT_INJECTION=y
# CONFIG_SCSI_UFS_HWMON is not set
# CONFIG_SCSI_UFSHCD_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_UFS_TI_J721E=m
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_CLASS_MULTICOLOR=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
CONFIG_LEDS_AN30259A=m
CONFIG_LEDS_ARIEL=m
CONFIG_LEDS_AW2013=m
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=m
CONFIG_LEDS_CR0014114=m
CONFIG_LEDS_EL15203000=y
# CONFIG_LEDS_TURRIS_OMNIA is not set
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3532=m
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_LM3642=m
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_MT6323 is not set
# CONFIG_LEDS_S3C24XX is not set
CONFIG_LEDS_COBALT_QUBE=m
# CONFIG_LEDS_COBALT_RAQ is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=m
# CONFIG_LEDS_LP55XX_COMMON is not set
CONFIG_LEDS_LP8860=m
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_DA903X=y
# CONFIG_LEDS_DA9052 is not set
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_NS2=m
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_MENF21BMC=m
CONFIG_LEDS_IS31FL319X=m
CONFIG_LEDS_IS31FL32XX=y
CONFIG_LEDS_SC27XX_BLTC=m

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_SPI_BYTE=y
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM3697=m
CONFIG_LEDS_IP30=m
# CONFIG_LEDS_ACER_A500 is not set
CONFIG_LEDS_BCM63138=m
# CONFIG_LEDS_LGM is not set

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#
# CONFIG_LEDS_PWM_MULTICOLOR is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_PATTERN=m
CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_LEDS_TRIGGER_TTY=y

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y

#
# Speakup console speech
#
# end of Speakup console speech

CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_LIB_KUNIT_TEST=y
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=m
# CONFIG_RTC_DRV_88PM80X is not set
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABEOZ9=m
CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_BRCMSTB=y
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_HYM8563 is not set
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8997=m
# CONFIG_RTC_DRV_MAX77686 is not set
CONFIG_RTC_DRV_NCT3018Y=m
CONFIG_RTC_DRV_RK808=m
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF85363=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_BD70528=y
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8010=m
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3028=m
CONFIG_RTC_DRV_RV3032=m
CONFIG_RTC_DRV_RV8803=m
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_SD3078=y

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1302=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1343=m
CONFIG_RTC_DRV_DS1347=y
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6916=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_MAX6902=y
# CONFIG_RTC_DRV_PCF2123 is not set
CONFIG_RTC_DRV_MCP795=m
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_DS3232_HWMON is not set
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set
CONFIG_RTC_DRV_RX6110=m

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_DA9052 is not set
# CONFIG_RTC_DRV_DA9055 is not set
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_STK17TA8=y
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_GAMECUBE=m
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_SC27XX=y
# CONFIG_RTC_DRV_SPEAR is not set
CONFIG_RTC_DRV_ZYNQMP=m

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_ASM9260 is not set
CONFIG_RTC_DRV_DAVINCI=y
CONFIG_RTC_DRV_DIGICOLOR=m
CONFIG_RTC_DRV_FSL_FTM_ALARM=y
CONFIG_RTC_DRV_MESON=m
CONFIG_RTC_DRV_MESON_VRTC=y
CONFIG_RTC_DRV_OMAP=m
CONFIG_RTC_DRV_S3C=y
# CONFIG_RTC_DRV_EP93XX is not set
# CONFIG_RTC_DRV_AT91RM9200 is not set
CONFIG_RTC_DRV_AT91SAM9=m
CONFIG_RTC_DRV_RZN1=m
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_RTC_DRV_VT8500 is not set
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
# CONFIG_RTC_DRV_MV is not set
# CONFIG_RTC_DRV_ARMADA38X is not set
CONFIG_RTC_DRV_CADENCE=m
# CONFIG_RTC_DRV_FTRTC010 is not set
CONFIG_RTC_DRV_STMP=m
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_RTC_DRV_JZ4740=m
# CONFIG_RTC_DRV_LPC24XX is not set
CONFIG_RTC_DRV_LPC32XX=m
# CONFIG_RTC_DRV_PM8XXX is not set
CONFIG_RTC_DRV_TEGRA=m
CONFIG_RTC_DRV_MXC=m
CONFIG_RTC_DRV_MXC_V2=y
CONFIG_RTC_DRV_SNVS=y
# CONFIG_RTC_DRV_MOXART is not set
# CONFIG_RTC_DRV_MT2712 is not set
CONFIG_RTC_DRV_MT6397=m
# CONFIG_RTC_DRV_MT7622 is not set
CONFIG_RTC_DRV_XGENE=y
CONFIG_RTC_DRV_R7301=m
# CONFIG_RTC_DRV_STM32 is not set
CONFIG_RTC_DRV_RTD119X=y
# CONFIG_RTC_DRV_ASPEED is not set
# CONFIG_RTC_DRV_TI_K3 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_RTC_DRV_GOLDFISH=m
CONFIG_RTC_DRV_MSC313=m
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
CONFIG_DMABUF_SELFTESTS=y
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=m
CONFIG_HD44780_COMMON=m
CONFIG_HD44780=m
CONFIG_IMG_ASCII_LCD=m
CONFIG_LCD2S=y
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_CHARLCD_BL_OFF=y
# CONFIG_CHARLCD_BL_ON is not set
# CONFIG_CHARLCD_BL_FLASH is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_UIO_AEC=m
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_UIO_PRUSS=m
CONFIG_UIO_MF624=m
CONFIG_VFIO=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI_CORE=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=y
# CONFIG_VFIO_PLATFORM is not set
CONFIG_VFIO_MDEV=y
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=m
CONFIG_VIRTIO_PCI_LIB_LEGACY=m
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

CONFIG_GREYBUS=m
CONFIG_GREYBUS_ES2=m
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
CONFIG_COMEDI_ISA_DRIVERS=y
# CONFIG_COMEDI_PCL711 is not set
# CONFIG_COMEDI_PCL724 is not set
CONFIG_COMEDI_PCL726=y
CONFIG_COMEDI_PCL730=y
# CONFIG_COMEDI_PCL812 is not set
CONFIG_COMEDI_PCL816=m
CONFIG_COMEDI_PCL818=m
# CONFIG_COMEDI_PCM3724 is not set
CONFIG_COMEDI_AMPLC_DIO200_ISA=y
CONFIG_COMEDI_AMPLC_PC236_ISA=m
# CONFIG_COMEDI_AMPLC_PC263_ISA is not set
# CONFIG_COMEDI_RTI800 is not set
CONFIG_COMEDI_RTI802=m
# CONFIG_COMEDI_DAC02 is not set
# CONFIG_COMEDI_DAS16M1 is not set
CONFIG_COMEDI_DAS08_ISA=y
CONFIG_COMEDI_DAS16=m
CONFIG_COMEDI_DAS800=y
# CONFIG_COMEDI_DAS1800 is not set
CONFIG_COMEDI_DAS6402=y
CONFIG_COMEDI_DT2801=y
CONFIG_COMEDI_DT2811=y
CONFIG_COMEDI_DT2814=y
CONFIG_COMEDI_DT2815=m
# CONFIG_COMEDI_DT2817 is not set
CONFIG_COMEDI_DT282X=m
CONFIG_COMEDI_DMM32AT=m
CONFIG_COMEDI_FL512=m
CONFIG_COMEDI_AIO_AIO12_8=y
CONFIG_COMEDI_AIO_IIRO_16=y
# CONFIG_COMEDI_II_PCI20KC is not set
CONFIG_COMEDI_C6XDIGIO=y
# CONFIG_COMEDI_MPC624 is not set
CONFIG_COMEDI_ADQ12B=m
CONFIG_COMEDI_NI_AT_A2150=y
CONFIG_COMEDI_NI_AT_AO=m
CONFIG_COMEDI_NI_ATMIO=m
# CONFIG_COMEDI_NI_ATMIO16D is not set
# CONFIG_COMEDI_NI_LABPC_ISA is not set
# CONFIG_COMEDI_PCMAD is not set
CONFIG_COMEDI_PCMDA12=m
# CONFIG_COMEDI_PCMMIO is not set
CONFIG_COMEDI_PCMUIO=m
CONFIG_COMEDI_MULTIQ3=y
# CONFIG_COMEDI_S526 is not set
CONFIG_COMEDI_PCI_DRIVERS=y
# CONFIG_COMEDI_8255_PCI is not set
CONFIG_COMEDI_ADDI_WATCHDOG=y
CONFIG_COMEDI_ADDI_APCI_1032=y
CONFIG_COMEDI_ADDI_APCI_1500=m
CONFIG_COMEDI_ADDI_APCI_1516=m
CONFIG_COMEDI_ADDI_APCI_1564=m
# CONFIG_COMEDI_ADDI_APCI_16XX is not set
CONFIG_COMEDI_ADDI_APCI_2032=y
CONFIG_COMEDI_ADDI_APCI_2200=y
CONFIG_COMEDI_ADDI_APCI_3120=y
# CONFIG_COMEDI_ADDI_APCI_3501 is not set
# CONFIG_COMEDI_ADDI_APCI_3XXX is not set
# CONFIG_COMEDI_ADL_PCI6208 is not set
# CONFIG_COMEDI_ADL_PCI7X3X is not set
CONFIG_COMEDI_ADL_PCI8164=y
CONFIG_COMEDI_ADL_PCI9111=y
# CONFIG_COMEDI_ADL_PCI9118 is not set
CONFIG_COMEDI_ADV_PCI1710=y
CONFIG_COMEDI_ADV_PCI1720=m
CONFIG_COMEDI_ADV_PCI1723=y
CONFIG_COMEDI_ADV_PCI1724=m
CONFIG_COMEDI_ADV_PCI1760=y
CONFIG_COMEDI_ADV_PCI_DIO=m
CONFIG_COMEDI_AMPLC_DIO200_PCI=m
# CONFIG_COMEDI_AMPLC_PC236_PCI is not set
CONFIG_COMEDI_AMPLC_PC263_PCI=m
CONFIG_COMEDI_AMPLC_PCI224=y
# CONFIG_COMEDI_AMPLC_PCI230 is not set
CONFIG_COMEDI_CONTEC_PCI_DIO=y
CONFIG_COMEDI_DAS08_PCI=y
CONFIG_COMEDI_DT3000=y
CONFIG_COMEDI_DYNA_PCI10XX=y
CONFIG_COMEDI_GSC_HPDI=m
# CONFIG_COMEDI_MF6X4 is not set
# CONFIG_COMEDI_ICP_MULTI is not set
CONFIG_COMEDI_DAQBOARD2000=m
CONFIG_COMEDI_JR3_PCI=m
CONFIG_COMEDI_KE_COUNTER=m
CONFIG_COMEDI_CB_PCIDAS64=y
# CONFIG_COMEDI_CB_PCIDAS is not set
# CONFIG_COMEDI_CB_PCIDDA is not set
CONFIG_COMEDI_CB_PCIMDAS=m
CONFIG_COMEDI_CB_PCIMDDA=m
CONFIG_COMEDI_ME4000=y
CONFIG_COMEDI_ME_DAQ=y
# CONFIG_COMEDI_NI_6527 is not set
CONFIG_COMEDI_NI_65XX=y
# CONFIG_COMEDI_NI_660X is not set
CONFIG_COMEDI_NI_670X=m
CONFIG_COMEDI_NI_LABPC_PCI=m
# CONFIG_COMEDI_NI_PCIDIO is not set
# CONFIG_COMEDI_NI_PCIMIO is not set
CONFIG_COMEDI_RTD520=m
CONFIG_COMEDI_S626=y
# CONFIG_COMEDI_USB_DRIVERS is not set
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
# CONFIG_COMEDI_KCOMEDILIB is not set
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_DAS08=y
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_NI_TIO=m
CONFIG_COMEDI_NI_ROUTING=m
CONFIG_COMEDI_TESTS=m
CONFIG_COMEDI_TESTS_EXAMPLE=m
CONFIG_COMEDI_TESTS_NI_ROUTES=m
# CONFIG_STAGING is not set
CONFIG_GOLDFISH=y
CONFIG_GOLDFISH_PIPE=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
# CONFIG_SURFACE_PLATFORMS is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_WM831X is not set

#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
CONFIG_CLK_SP810=y
# end of Clock driver for ARM Reference designs

CONFIG_CLK_HSDK=y
CONFIG_LMK04832=m
# CONFIG_COMMON_CLK_APPLE_NCO is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
CONFIG_COMMON_CLK_MAX9485=y
CONFIG_COMMON_CLK_RK808=m
CONFIG_COMMON_CLK_HI655X=m
CONFIG_COMMON_CLK_SCMI=m
CONFIG_COMMON_CLK_SCPI=y
# CONFIG_COMMON_CLK_SI5341 is not set
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=m
CONFIG_COMMON_CLK_SI544=m
CONFIG_COMMON_CLK_SI570=m
# CONFIG_COMMON_CLK_BM1880 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_TPS68470 is not set
CONFIG_COMMON_CLK_CDCE925=m
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_EN7523 is not set
CONFIG_COMMON_CLK_FSL_FLEXSPI=y
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
CONFIG_COMMON_CLK_AXI_CLKGEN=y
# CONFIG_CLK_QORIQ is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
# CONFIG_COMMON_CLK_PWM is not set
CONFIG_COMMON_CLK_OXNAS=y
# CONFIG_COMMON_CLK_RS9_PCIE is not set
CONFIG_COMMON_CLK_VC5=y
CONFIG_COMMON_CLK_MMP2_AUDIO=y
CONFIG_COMMON_CLK_BD718XX=y
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
CONFIG_CLK_BCM2711_DVP=m
CONFIG_CLK_BCM2835=y
# CONFIG_CLK_BCM_63XX is not set
CONFIG_CLK_BCM_63XX_GATE=y
CONFIG_CLK_BCM_KONA=y
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CLK_BCM_CYGNUS=y
CONFIG_CLK_BCM_HR2=y
CONFIG_CLK_BCM_NSP=y
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
CONFIG_CLK_RASPBERRYPI=m
# CONFIG_COMMON_CLK_HI3516CV300 is not set
CONFIG_COMMON_CLK_HI3519=m
CONFIG_COMMON_CLK_HI3559A=y
CONFIG_COMMON_CLK_HI3660=y
# CONFIG_COMMON_CLK_HI3670 is not set
CONFIG_COMMON_CLK_HI3798CV200=y
# CONFIG_COMMON_CLK_HI6220 is not set
CONFIG_RESET_HISI=y
# CONFIG_STUB_CLK_HI6220 is not set
CONFIG_STUB_CLK_HI3660=y
CONFIG_COMMON_CLK_BOSTON=y
CONFIG_MXC_CLK=m
CONFIG_CLK_IMX8MM=m
CONFIG_CLK_IMX8MN=m
# CONFIG_CLK_IMX8MP is not set
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set

#
# Ingenic SoCs drivers
#
CONFIG_INGENIC_CGU_COMMON=y
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
CONFIG_INGENIC_CGU_JZ4760=y
CONFIG_INGENIC_CGU_JZ4770=y
# CONFIG_INGENIC_CGU_JZ4780 is not set
CONFIG_INGENIC_CGU_X1000=y
# CONFIG_INGENIC_CGU_X1830 is not set
CONFIG_INGENIC_TCU_CLK=y
# end of Ingenic SoCs drivers

CONFIG_COMMON_CLK_KEYSTONE=y
# CONFIG_TI_SYSCON_CLK is not set

#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
CONFIG_COMMON_CLK_MT2701_MMSYS=y
CONFIG_COMMON_CLK_MT2701_IMGSYS=y
# CONFIG_COMMON_CLK_MT2701_VDECSYS is not set
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
CONFIG_COMMON_CLK_MT2701_ETHSYS=y
# CONFIG_COMMON_CLK_MT2701_BDPSYS is not set
# CONFIG_COMMON_CLK_MT2701_AUDSYS is not set
# CONFIG_COMMON_CLK_MT2701_G3DSYS is not set
CONFIG_COMMON_CLK_MT2712=y
# CONFIG_COMMON_CLK_MT2712_BDPSYS is not set
CONFIG_COMMON_CLK_MT2712_IMGSYS=y
CONFIG_COMMON_CLK_MT2712_JPGDECSYS=y
CONFIG_COMMON_CLK_MT2712_MFGCFG=y
# CONFIG_COMMON_CLK_MT2712_MMSYS is not set
# CONFIG_COMMON_CLK_MT2712_VDECSYS is not set
# CONFIG_COMMON_CLK_MT2712_VENCSYS is not set
# CONFIG_COMMON_CLK_MT6765 is not set
CONFIG_COMMON_CLK_MT6779=m
CONFIG_COMMON_CLK_MT6779_MMSYS=m
CONFIG_COMMON_CLK_MT6779_IMGSYS=m
# CONFIG_COMMON_CLK_MT6779_IPESYS is not set
# CONFIG_COMMON_CLK_MT6779_CAMSYS is not set
CONFIG_COMMON_CLK_MT6779_VDECSYS=m
CONFIG_COMMON_CLK_MT6779_VENCSYS=m
CONFIG_COMMON_CLK_MT6779_MFGCFG=m
# CONFIG_COMMON_CLK_MT6779_AUDSYS is not set
# CONFIG_COMMON_CLK_MT6797 is not set
CONFIG_COMMON_CLK_MT7622=y
# CONFIG_COMMON_CLK_MT7622_ETHSYS is not set
# CONFIG_COMMON_CLK_MT7622_HIFSYS is not set
# CONFIG_COMMON_CLK_MT7622_AUDSYS is not set
# CONFIG_COMMON_CLK_MT7629 is not set
CONFIG_COMMON_CLK_MT7986=y
# CONFIG_COMMON_CLK_MT7986_ETHSYS is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
CONFIG_COMMON_CLK_MT8173=y
# CONFIG_COMMON_CLK_MT8173_MMSYS is not set
# CONFIG_COMMON_CLK_MT8183 is not set
CONFIG_COMMON_CLK_MT8186=y
# CONFIG_COMMON_CLK_MT8192 is not set
CONFIG_COMMON_CLK_MT8195=y
CONFIG_COMMON_CLK_MT8516=y
# CONFIG_COMMON_CLK_MT8516_AUDSYS is not set
# end of Clock driver for MediaTek SoC

#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms

CONFIG_MSTAR_MSC313_MPLL=y
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
CONFIG_CLK_MT7621=y
CONFIG_CLK_RENESAS=y
# CONFIG_CLK_EMEV2 is not set
# CONFIG_CLK_RZA1 is not set
CONFIG_CLK_R7S9210=y
CONFIG_CLK_R8A73A4=y
CONFIG_CLK_R8A7740=y
CONFIG_CLK_R8A7742=y
CONFIG_CLK_R8A7743=y
CONFIG_CLK_R8A7745=y
CONFIG_CLK_R8A77470=y
# CONFIG_CLK_R8A774A1 is not set
CONFIG_CLK_R8A774B1=y
# CONFIG_CLK_R8A774C0 is not set
CONFIG_CLK_R8A774E1=y
# CONFIG_CLK_R8A7778 is not set
CONFIG_CLK_R8A7779=y
# CONFIG_CLK_R8A7790 is not set
CONFIG_CLK_R8A7791=y
CONFIG_CLK_R8A7792=y
CONFIG_CLK_R8A7794=y
CONFIG_CLK_R8A7795=y
# CONFIG_CLK_R8A77960 is not set
CONFIG_CLK_R8A77961=y
CONFIG_CLK_R8A77965=y
CONFIG_CLK_R8A77970=y
# CONFIG_CLK_R8A77980 is not set
CONFIG_CLK_R8A77990=y
# CONFIG_CLK_R8A77995 is not set
# CONFIG_CLK_R8A779A0 is not set
CONFIG_CLK_R8A779F0=y
CONFIG_CLK_R8A779G0=y
CONFIG_CLK_R9A06G032=y
CONFIG_CLK_R9A07G043=y
CONFIG_CLK_R9A07G044=y
CONFIG_CLK_R9A07G054=y
# CONFIG_CLK_R9A09G011 is not set
CONFIG_CLK_SH73A0=y
CONFIG_CLK_RCAR_CPG_LIB=y
CONFIG_CLK_RCAR_GEN2_CPG=y
CONFIG_CLK_RCAR_GEN3_CPG=y
CONFIG_CLK_RCAR_GEN4_CPG=y
# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set
CONFIG_CLK_RZG2L=y
CONFIG_CLK_RENESAS_CPG_MSSR=y
CONFIG_CLK_RENESAS_CPG_MSTP=y
CONFIG_CLK_RENESAS_DIV6=y
CONFIG_COMMON_CLK_SAMSUNG=y
CONFIG_S3C64XX_COMMON_CLK=y
# CONFIG_S5PV210_COMMON_CLK is not set
CONFIG_EXYNOS_3250_COMMON_CLK=y
CONFIG_EXYNOS_4_COMMON_CLK=y
# CONFIG_EXYNOS_5250_COMMON_CLK is not set
# CONFIG_EXYNOS_5260_COMMON_CLK is not set
# CONFIG_EXYNOS_5410_COMMON_CLK is not set
# CONFIG_EXYNOS_5420_COMMON_CLK is not set
# CONFIG_EXYNOS_ARM64_COMMON_CLK is not set
CONFIG_EXYNOS_AUDSS_CLK_CON=m
CONFIG_EXYNOS_CLKOUT=m
# CONFIG_S3C2410_COMMON_CLK is not set
CONFIG_S3C2412_COMMON_CLK=y
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
# CONFIG_CLK_SUNXI is not set
CONFIG_SUNXI_CCU=m
CONFIG_SUNIV_F1C100S_CCU=m
CONFIG_SUN20I_D1_CCU=m
CONFIG_SUN20I_D1_R_CCU=m
CONFIG_SUN50I_A64_CCU=m
# CONFIG_SUN50I_A100_CCU is not set
CONFIG_SUN50I_A100_R_CCU=m
CONFIG_SUN50I_H6_CCU=m
CONFIG_SUN50I_H616_CCU=m
# CONFIG_SUN50I_H6_R_CCU is not set
CONFIG_SUN4I_A10_CCU=m
CONFIG_SUN6I_A31_CCU=m
# CONFIG_SUN6I_RTC_CCU is not set
# CONFIG_SUN8I_A23_CCU is not set
# CONFIG_SUN8I_A33_CCU is not set
CONFIG_SUN8I_A83T_CCU=m
# CONFIG_SUN8I_H3_CCU is not set
# CONFIG_SUN8I_V3S_CCU is not set
CONFIG_SUN8I_DE2_CCU=m
CONFIG_SUN8I_R40_CCU=m
CONFIG_SUN9I_A80_CCU=m
# CONFIG_SUN8I_R_CCU is not set
CONFIG_COMMON_CLK_TI_ADPLL=m
CONFIG_CLK_UNIPHIER=y
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
# CONFIG_XILINX_VCU is not set
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_CLK_KUNIT_TEST=y
# CONFIG_CLK_GATE_KUNIT_TEST is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_BCM2835_TIMER=y
CONFIG_BCM_KONA_TIMER=y
CONFIG_DAVINCI_TIMER=y
CONFIG_DIGICOLOR_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_DW_APB_TIMER=y
CONFIG_FTTMR010_TIMER=y
CONFIG_IXP4XX_TIMER=y
CONFIG_MESON6_TIMER=y
CONFIG_OWL_TIMER=y
CONFIG_RDA_TIMER=y
CONFIG_SUN4I_TIMER=y
CONFIG_SUN5I_HSTIMER=y
CONFIG_TEGRA_TIMER=y
CONFIG_VT8500_TIMER=y
CONFIG_NPCM7XX_TIMER=y
CONFIG_CADENCE_TTC_TIMER=y
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
CONFIG_CLPS711X_TIMER=y
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
CONFIG_CLKSRC_STM32_LP=y
CONFIG_ARMV7M_SYSTICK=y
# CONFIG_ATMEL_PIT is not set
CONFIG_ATMEL_ST=y
CONFIG_CLKSRC_SAMSUNG_PWM=y
# CONFIG_FSL_FTM_TIMER is not set
CONFIG_OXNAS_RPS_TIMER=y
CONFIG_MTK_TIMER=y
# CONFIG_SPRD_TIMER is not set
CONFIG_CLKSRC_JCORE_PIT=y
CONFIG_SH_TIMER_CMT=y
# CONFIG_SH_TIMER_MTU2 is not set
CONFIG_RENESAS_OSTM=y
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_CLKSRC_PXA=y
CONFIG_TIMER_IMX_SYS_CTR=y
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
CONFIG_INGENIC_SYSOST=y
# CONFIG_INGENIC_OST is not set
CONFIG_MICROCHIP_PIT64B=y
CONFIG_GOLDFISH_TIMER=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
# CONFIG_IMX_MBOX is not set
# CONFIG_PLATFORM_MHU is not set
CONFIG_ARMADA_37XX_RWTM_MBOX=m
CONFIG_ROCKCHIP_MBOX=y
CONFIG_ALTERA_MBOX=m
# CONFIG_HI3660_MBOX is not set
# CONFIG_HI6220_MBOX is not set
CONFIG_MAILBOX_TEST=y
# CONFIG_POLARFIRE_SOC_MAILBOX is not set
CONFIG_QCOM_APCS_IPC=y
CONFIG_BCM_PDC_MBOX=m
CONFIG_STM32_IPCC=m
# CONFIG_MTK_ADSP_MBOX is not set
CONFIG_MTK_CMDQ_MBOX=y
CONFIG_SUN6I_MSGBOX=y
CONFIG_SPRD_MBOX=m
CONFIG_QCOM_IPCC=y
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CTRL=m
# CONFIG_RPMSG_NS is not set
CONFIG_RPMSG_QCOM_GLINK=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=m

#
# SoundWire Devices
#

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
CONFIG_MESON_CLK_MEASURE=y
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
# CONFIG_APPLE_RTKIT is not set
CONFIG_APPLE_SART=y
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
CONFIG_ASPEED_LPC_CTRL=m
CONFIG_ASPEED_LPC_SNOOP=m
CONFIG_ASPEED_UART_ROUTING=m
CONFIG_ASPEED_P2A_CTRL=y
CONFIG_ASPEED_SOCINFO=y
# end of ASPEED SoC drivers

# CONFIG_AT91_SOC_ID is not set
CONFIG_AT91_SOC_SFR=y

#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
CONFIG_QUICC_ENGINE=y
# CONFIG_DPAA2_CONSOLE is not set
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=m
CONFIG_IXP4XX_NPE=m
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

#
# MediaTek SoC drivers
#
CONFIG_MTK_CMDQ=y
CONFIG_MTK_DEVAPC=y
CONFIG_MTK_INFRACFG=y
CONFIG_MTK_PMIC_WRAP=m
CONFIG_MTK_SCPSYS=y
# CONFIG_MTK_MMSYS is not set
CONFIG_MTK_SVS=m
# end of MediaTek SoC drivers

#
# Qualcomm SoC drivers
#
CONFIG_QCOM_COMMAND_DB=m
CONFIG_QCOM_GENI_SE=m
CONFIG_QCOM_GSBI=m
CONFIG_QCOM_LLCC=m
# CONFIG_QCOM_RPMH is not set
CONFIG_QCOM_SMD_RPM=m
CONFIG_QCOM_SPM=m
# CONFIG_QCOM_WCNSS_CTRL is not set
CONFIG_QCOM_ICC_BWMON=y
# end of Qualcomm SoC drivers

# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
CONFIG_ROCKCHIP_IODOMAIN=y
# CONFIG_ROCKCHIP_DTPM is not set
CONFIG_SOC_SAMSUNG=y
# CONFIG_EXYNOS_CHIPID is not set
CONFIG_EXYNOS_USI=m
CONFIG_EXYNOS_PM_DOMAINS=y
# CONFIG_EXYNOS_REGULATOR_COUPLER is not set
CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER=y
CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER=y
CONFIG_SOC_TI=y
# CONFIG_UX500_SOC_ID is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
CONFIG_DEVFREQ_GOV_PASSIVE=m

#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
CONFIG_ARM_TEGRA_DEVFREQ=y
CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m
CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ=m
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
# CONFIG_EXTCON_FSA9480 is not set
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_MAX3355 is not set
# CONFIG_EXTCON_MAX77843 is not set
# CONFIG_EXTCON_MAX8997 is not set
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_QCOM_SPMI_MISC=y
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_EXTCON_USBC_TUSB320=y
CONFIG_MEMORY=y
CONFIG_DDR=y
# CONFIG_ATMEL_SDRAMC is not set
# CONFIG_ATMEL_EBI is not set
CONFIG_BRCMSTB_DPFE=y
# CONFIG_BT1_L2_CTL is not set
# CONFIG_TI_AEMIF is not set
CONFIG_TI_EMIF=y
# CONFIG_OMAP_GPMC is not set
CONFIG_MVEBU_DEVBUS=y
# CONFIG_FSL_CORENET_CF is not set
CONFIG_FSL_IFC=y
# CONFIG_JZ4780_NEMC is not set
# CONFIG_MTK_SMI is not set
CONFIG_DA8XX_DDRCTL=y
# CONFIG_RENESAS_RPCIF is not set
# CONFIG_STM32_FMC2_EBI is not set
# CONFIG_SAMSUNG_MC is not set
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=m
# CONFIG_TEGRA30_EMC is not set
# CONFIG_TEGRA124_EMC is not set
CONFIG_TEGRA210_EMC_TABLE=y
CONFIG_TEGRA210_EMC=m
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_BUFFER_DMA=m
CONFIG_IIO_BUFFER_DMAENGINE=m
CONFIG_IIO_BUFFER_HW_CONSUMER=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_TRIGGERED_EVENT=m

#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16209 is not set
CONFIG_ADXL313=m
CONFIG_ADXL313_I2C=m
CONFIG_ADXL313_SPI=m
CONFIG_ADXL345=m
CONFIG_ADXL345_I2C=m
CONFIG_ADXL345_SPI=m
CONFIG_ADXL355=m
CONFIG_ADXL355_I2C=m
CONFIG_ADXL355_SPI=m
CONFIG_ADXL367=m
CONFIG_ADXL367_SPI=m
CONFIG_ADXL367_I2C=m
CONFIG_ADXL372=m
CONFIG_ADXL372_SPI=m
CONFIG_ADXL372_I2C=m
CONFIG_BMA180=m
CONFIG_BMA220=m
CONFIG_BMA400=m
CONFIG_BMA400_I2C=m
CONFIG_BMA400_SPI=m
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=m
CONFIG_BMI088_ACCEL=m
CONFIG_BMI088_ACCEL_SPI=m
# CONFIG_DA280 is not set
CONFIG_DA311=m
CONFIG_DMARD06=m
# CONFIG_DMARD09 is not set
CONFIG_DMARD10=m
CONFIG_FXLS8962AF=m
# CONFIG_FXLS8962AF_I2C is not set
CONFIG_FXLS8962AF_SPI=m
# CONFIG_HID_SENSOR_ACCEL_3D is not set
CONFIG_KXSD9=m
# CONFIG_KXSD9_SPI is not set
CONFIG_KXSD9_I2C=m
CONFIG_KXCJK1013=m
CONFIG_MC3230=m
CONFIG_MMA7455=m
# CONFIG_MMA7455_I2C is not set
CONFIG_MMA7455_SPI=m
CONFIG_MMA7660=m
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
CONFIG_MXC4005=m
CONFIG_MXC6255=m
CONFIG_SCA3000=m
# CONFIG_SCA3300 is not set
CONFIG_STK8312=m
CONFIG_STK8BA50=m
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=m
CONFIG_AD7091R5=m
CONFIG_AD7124=m
CONFIG_AD7192=m
CONFIG_AD7266=m
# CONFIG_AD7280 is not set
# CONFIG_AD7291 is not set
CONFIG_AD7292=m
CONFIG_AD7298=m
CONFIG_AD7476=m
CONFIG_AD7606=m
# CONFIG_AD7606_IFACE_PARALLEL is not set
CONFIG_AD7606_IFACE_SPI=m
CONFIG_AD7766=m
CONFIG_AD7768_1=m
CONFIG_AD7780=m
CONFIG_AD7791=m
CONFIG_AD7793=m
CONFIG_AD7887=m
CONFIG_AD7923=m
CONFIG_AD7949=m
CONFIG_AD799X=m
CONFIG_AD9467=m
CONFIG_ADI_AXI_ADC=m
# CONFIG_ASPEED_ADC is not set
# CONFIG_AT91_ADC is not set
CONFIG_AT91_SAMA5D2_ADC=m
# CONFIG_AXP20X_ADC is not set
CONFIG_AXP288_ADC=m
CONFIG_BCM_IPROC_ADC=m
# CONFIG_BERLIN2_ADC is not set
CONFIG_CC10001_ADC=m
CONFIG_DA9150_GPADC=m
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_EXYNOS_ADC=m
CONFIG_MXS_LRADC_ADC=m
CONFIG_FSL_MX25_ADC=m
CONFIG_HI8435=m
# CONFIG_HX711 is not set
CONFIG_INA2XX_ADC=m
CONFIG_INGENIC_ADC=m
# CONFIG_IMX7D_ADC is not set
CONFIG_IMX8QXP_ADC=m
CONFIG_LPC18XX_ADC=m
CONFIG_LPC32XX_ADC=m
CONFIG_LTC2471=m
# CONFIG_LTC2485 is not set
CONFIG_LTC2496=m
# CONFIG_LTC2497 is not set
# CONFIG_MAX1027 is not set
CONFIG_MAX11100=m
CONFIG_MAX1118=m
# CONFIG_MAX1241 is not set
CONFIG_MAX1363=m
CONFIG_MAX9611=m
CONFIG_MCP320X=m
CONFIG_MCP3422=m
# CONFIG_MCP3911 is not set
# CONFIG_MEDIATEK_MT6360_ADC is not set
CONFIG_MEDIATEK_MT6577_AUXADC=m
# CONFIG_MEN_Z188_ADC is not set
# CONFIG_MESON_SARADC is not set
CONFIG_MP2629_ADC=m
CONFIG_NAU7802=m
# CONFIG_NPCM_ADC is not set
CONFIG_RCAR_GYRO_ADC=m
# CONFIG_ROCKCHIP_SARADC is not set
CONFIG_RZG2L_ADC=m
CONFIG_SC27XX_ADC=m
CONFIG_SPEAR_ADC=m
# CONFIG_SD_ADC_MODULATOR is not set
CONFIG_STM32_ADC_CORE=m
# CONFIG_STM32_ADC is not set
CONFIG_STM32_DFSDM_CORE=m
CONFIG_STM32_DFSDM_ADC=m
CONFIG_STMPE_ADC=m
CONFIG_SUN4I_GPADC=m
# CONFIG_TI_ADC081C is not set
CONFIG_TI_ADC0832=m
CONFIG_TI_ADC084S021=m
CONFIG_TI_ADC12138=m
CONFIG_TI_ADC108S102=m
CONFIG_TI_ADC128S052=m
CONFIG_TI_ADC161S626=m
CONFIG_TI_ADS1015=m
# CONFIG_TI_ADS7950 is not set
# CONFIG_TI_ADS8344 is not set
# CONFIG_TI_ADS8688 is not set
CONFIG_TI_ADS124S08=m
CONFIG_TI_ADS131E08=m
CONFIG_TI_TLC4541=m
CONFIG_TI_TSC2046=m
CONFIG_TWL4030_MADC=m
# CONFIG_TWL6030_GPADC is not set
CONFIG_VF610_ADC=m
CONFIG_VIPERBOARD_ADC=m
# CONFIG_XILINX_XADC is not set
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
CONFIG_AD74413R=m
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set
# end of Analog Front Ends

#
# Amplifiers
#
CONFIG_AD8366=m
CONFIG_ADA4250=m
CONFIG_HMC425=m
# end of Amplifiers

#
# Capacitance to digital converters
#
CONFIG_AD7150=m
# end of Capacitance to digital converters

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=m
CONFIG_ATLAS_EZO_SENSOR=m
CONFIG_BME680=m
CONFIG_BME680_I2C=m
CONFIG_BME680_SPI=m
CONFIG_CCS811=m
CONFIG_IAQCORE=m
CONFIG_PMS7003=m
CONFIG_SCD30_CORE=m
# CONFIG_SCD30_I2C is not set
CONFIG_SCD30_SERIAL=m
CONFIG_SCD4X=m
CONFIG_SENSIRION_SGP30=m
# CONFIG_SENSIRION_SGP40 is not set
CONFIG_SPS30=m
CONFIG_SPS30_I2C=m
CONFIG_SPS30_SERIAL=m
CONFIG_SENSEAIR_SUNRISE_CO2=m
# CONFIG_VZ89X is not set
# end of Chemical Sensors

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=m

#
# IIO SCMI Sensors
#
CONFIG_IIO_SCMI=m
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORHUB is not set
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=m
CONFIG_IIO_ST_SENSORS_CORE=m

#
# Digital to analog converters
#
CONFIG_AD3552R=m
CONFIG_AD5064=m
CONFIG_AD5360=m
CONFIG_AD5380=m
CONFIG_AD5421=m
CONFIG_AD5446=m
# CONFIG_AD5449 is not set
CONFIG_AD5592R_BASE=m
CONFIG_AD5592R=m
# CONFIG_AD5593R is not set
CONFIG_AD5504=m
CONFIG_AD5624R_SPI=m
CONFIG_LTC2688=m
CONFIG_AD5686=m
# CONFIG_AD5686_SPI is not set
CONFIG_AD5696_I2C=m
CONFIG_AD5755=m
CONFIG_AD5758=m
CONFIG_AD5761=m
# CONFIG_AD5764 is not set
# CONFIG_AD5766 is not set
CONFIG_AD5770R=m
# CONFIG_AD5791 is not set
# CONFIG_AD7293 is not set
# CONFIG_AD7303 is not set
CONFIG_AD8801=m
CONFIG_DPOT_DAC=m
# CONFIG_DS4424 is not set
CONFIG_LPC18XX_DAC=m
CONFIG_LTC1660=m
CONFIG_LTC2632=m
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
CONFIG_MAX5821=m
# CONFIG_MCP4725 is not set
# CONFIG_MCP4922 is not set
CONFIG_STM32_DAC=m
CONFIG_STM32_DAC_CORE=m
# CONFIG_TI_DAC082S085 is not set
CONFIG_TI_DAC5571=m
CONFIG_TI_DAC7311=m
CONFIG_TI_DAC7612=m
CONFIG_VF610_DAC=m
# end of Digital to analog converters

#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
# end of IIO dummy driver

#
# Filters
#
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
CONFIG_AD9523=m
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
# CONFIG_ADF4371 is not set
# CONFIG_ADMV1013 is not set
CONFIG_ADMV4420=m
CONFIG_ADRF6780=m
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
CONFIG_ADIS16136=m
# CONFIG_ADIS16260 is not set
CONFIG_ADXRS290=m
# CONFIG_ADXRS450 is not set
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
CONFIG_FXAS21002C_SPI=m
CONFIG_HID_SENSOR_GYRO_3D=m
# CONFIG_MPU3050_I2C is not set
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
CONFIG_ITG3200=m
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
# CONFIG_AFE4403 is not set
# CONFIG_AFE4404 is not set
CONFIG_MAX30100=m
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
CONFIG_AM2315=m
CONFIG_DHT11=m
CONFIG_HDC100X=m
# CONFIG_HDC2010 is not set
CONFIG_HID_SENSOR_HUMIDITY=m
CONFIG_HTS221=m
CONFIG_HTS221_I2C=m
CONFIG_HTS221_SPI=m
CONFIG_HTU21=m
CONFIG_SI7005=m
CONFIG_SI7020=m
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_ADIS16400=m
CONFIG_ADIS16460=m
# CONFIG_ADIS16475 is not set
# CONFIG_ADIS16480 is not set
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
CONFIG_BMI160_SPI=m
CONFIG_FXOS8700=m
CONFIG_FXOS8700_I2C=m
# CONFIG_FXOS8700_SPI is not set
CONFIG_KMX61=m
CONFIG_INV_ICM42600=m
# CONFIG_INV_ICM42600_I2C is not set
CONFIG_INV_ICM42600_SPI=m
# CONFIG_INV_MPU6050_I2C is not set
# CONFIG_INV_MPU6050_SPI is not set
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_SPI=m
CONFIG_IIO_ST_LSM6DSX_I3C=m
# end of Inertial measurement units

CONFIG_IIO_ADIS_LIB=m
CONFIG_IIO_ADIS_LIB_BUFFER=y

#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
CONFIG_ADUX1020=m
CONFIG_AL3010=m
CONFIG_AL3320A=m
# CONFIG_APDS9300 is not set
# CONFIG_APDS9960 is not set
CONFIG_AS73211=m
CONFIG_BH1750=m
CONFIG_BH1780=m
CONFIG_CM32181=m
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
# CONFIG_CM3605 is not set
# CONFIG_CM36651 is not set
CONFIG_GP2AP002=m
# CONFIG_GP2AP020A00F is not set
CONFIG_IQS621_ALS=m
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
CONFIG_ISL29125=m
# CONFIG_HID_SENSOR_ALS is not set
# CONFIG_HID_SENSOR_PROX is not set
# CONFIG_JSA1212 is not set
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
# CONFIG_LTR501 is not set
CONFIG_LV0104CS=m
CONFIG_MAX44000=m
CONFIG_MAX44009=m
CONFIG_NOA1305=m
CONFIG_OPT3001=m
# CONFIG_PA12203001 is not set
CONFIG_SI1133=m
CONFIG_SI1145=m
CONFIG_STK3310=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25_SPI=m
CONFIG_TCS3414=m
# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL2591 is not set
CONFIG_TSL2772=m
# CONFIG_TSL4531 is not set
CONFIG_US5182D=m
CONFIG_VCNL4000=m
# CONFIG_VCNL4035 is not set
CONFIG_VEML6030=m
# CONFIG_VEML6070 is not set
CONFIG_VL6180=m
CONFIG_ZOPT2201=m
# end of Light sensors

#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_BMC150_MAGN_SPI=m
CONFIG_MAG3110=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
# CONFIG_MMC35240 is not set
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
# CONFIG_IIO_ST_MAGN_SPI_3AXIS is not set
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_SENSORS_HMC5843_SPI=m
CONFIG_SENSORS_RM3100=m
# CONFIG_SENSORS_RM3100_I2C is not set
CONFIG_SENSORS_RM3100_SPI=m
CONFIG_YAMAHA_YAS530=m
# end of Magnetometer sensors

#
# Multiplexers
#
# CONFIG_IIO_MUX is not set
# end of Multiplexers

#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# end of Inclinometer sensors

CONFIG_IIO_FORMAT_KUNIT_TEST=m

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=m
CONFIG_IIO_INTERRUPT_TRIGGER=m
CONFIG_IIO_STM32_LPTIMER_TRIGGER=m
CONFIG_IIO_STM32_TIMER_TRIGGER=m
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
# CONFIG_IIO_SYSFS_TRIGGER is not set
# end of Triggers - standalone

#
# Linear and angular position sensors
#
# CONFIG_IQS624_POS is not set
CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE=m
# end of Linear and angular position sensors

#
# Digital potentiometers
#
CONFIG_AD5110=m
# CONFIG_AD5272 is not set
CONFIG_DS1803=m
CONFIG_MAX5432=m
# CONFIG_MAX5481 is not set
CONFIG_MAX5487=m
CONFIG_MCP4018=m
# CONFIG_MCP4131 is not set
CONFIG_MCP4531=m
CONFIG_MCP41010=m
# CONFIG_TPL0102 is not set
# end of Digital potentiometers

#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set
# end of Digital potentiostats

#
# Pressure sensors
#
CONFIG_ABP060MG=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_BMP280_SPI=m
CONFIG_DLHL60D=m
CONFIG_DPS310=m
CONFIG_HID_SENSOR_PRESS=m
CONFIG_HP03=m
CONFIG_ICP10100=m
# CONFIG_MPL115_I2C is not set
# CONFIG_MPL115_SPI is not set
CONFIG_MPL3115=m
CONFIG_MS5611=m
CONFIG_MS5611_I2C=m
# CONFIG_MS5611_SPI is not set
CONFIG_MS5637=m
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_T5403 is not set
CONFIG_HP206C=m
# CONFIG_ZPA2326 is not set
# end of Pressure sensors

#
# Lightning sensors
#
CONFIG_AS3935=m
# end of Lightning sensors

#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
CONFIG_LIDAR_LITE_V2=m
CONFIG_MB1232=m
CONFIG_PING=m
CONFIG_RFD77402=m
# CONFIG_SRF04 is not set
CONFIG_SX_COMMON=m
# CONFIG_SX9310 is not set
CONFIG_SX9324=m
# CONFIG_SX9360 is not set
CONFIG_SX9500=m
CONFIG_SRF08=m
CONFIG_VCNL3020=m
CONFIG_VL53L0X_I2C=m
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
CONFIG_AD2S90=m
# CONFIG_AD2S1200 is not set
# end of Resolver to digital converters

#
# Temperature sensors
#
# CONFIG_IQS620AT_TEMP is not set
# CONFIG_LTC2983 is not set
CONFIG_MAXIM_THERMOCOUPLE=m
CONFIG_HID_SENSOR_TEMP=m
CONFIG_MLX90614=m
CONFIG_MLX90632=m
CONFIG_TMP006=m
CONFIG_TMP007=m
# CONFIG_TMP117 is not set
CONFIG_TSYS01=m
CONFIG_TSYS02D=m
CONFIG_MAX31856=m
# CONFIG_MAX31865 is not set
# end of Temperature sensors

CONFIG_NTB=y
# CONFIG_NTB_MSI is not set
CONFIG_NTB_IDT=y
CONFIG_NTB_EPF=m
# CONFIG_NTB_SWITCHTEC is not set
CONFIG_NTB_PINGPONG=y
CONFIG_NTB_TOOL=y
CONFIG_NTB_PERF=m
# CONFIG_NTB_TRANSPORT is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
CONFIG_PWM_ATMEL=m
# CONFIG_PWM_ATMEL_TCB is not set
# CONFIG_PWM_BCM_IPROC is not set
CONFIG_PWM_BCM_KONA=y
# CONFIG_PWM_BCM2835 is not set
CONFIG_PWM_BERLIN=y
CONFIG_PWM_BRCMSTB=m
CONFIG_PWM_CLK=m
CONFIG_PWM_CLPS711X=m
CONFIG_PWM_DWC=y
CONFIG_PWM_EP93XX=y
CONFIG_PWM_FSL_FTM=m
CONFIG_PWM_HIBVT=y
# CONFIG_PWM_IMG is not set
CONFIG_PWM_IMX1=m
CONFIG_PWM_IMX27=y
# CONFIG_PWM_IMX_TPM is not set
# CONFIG_PWM_INTEL_LGM is not set
CONFIG_PWM_IQS620A=m
# CONFIG_PWM_JZ4740 is not set
CONFIG_PWM_KEEMBAY=m
# CONFIG_PWM_LP3943 is not set
CONFIG_PWM_LPC18XX_SCT=m
CONFIG_PWM_LPC32XX=y
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
CONFIG_PWM_MTK_DISP=m
CONFIG_PWM_MEDIATEK=y
CONFIG_PWM_MXS=m
CONFIG_PWM_OMAP_DMTIMER=y
CONFIG_PWM_PCA9685=y
# CONFIG_PWM_PXA is not set
CONFIG_PWM_RASPBERRYPI_POE=y
# CONFIG_PWM_RCAR is not set
CONFIG_PWM_RENESAS_TPU=m
# CONFIG_PWM_ROCKCHIP is not set
CONFIG_PWM_SAMSUNG=m
# CONFIG_PWM_SIFIVE is not set
CONFIG_PWM_SL28CPLD=m
CONFIG_PWM_SPEAR=y
CONFIG_PWM_SPRD=y
CONFIG_PWM_STI=m
# CONFIG_PWM_STM32 is not set
CONFIG_PWM_STM32_LP=m
CONFIG_PWM_STMPE=y
# CONFIG_PWM_SUN4I is not set
CONFIG_PWM_SUNPLUS=y
CONFIG_PWM_TEGRA=m
# CONFIG_PWM_TIECAP is not set
CONFIG_PWM_TIEHRPWM=y
# CONFIG_PWM_TWL is not set
CONFIG_PWM_TWL_LED=m
CONFIG_PWM_VISCONTI=m
CONFIG_PWM_VT8500=m
CONFIG_PWM_XILINX=m

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_OR1K_PIC=y
CONFIG_JCORE_AIC=y
# CONFIG_RENESAS_INTC_IRQPIN is not set
CONFIG_RENESAS_IRQC=y
CONFIG_RENESAS_RZA1_IRQC=y
# CONFIG_RENESAS_RZG2L_IRQC is not set
CONFIG_SL28CPLD_INTC=y
CONFIG_TS4800_IRQ=m
# CONFIG_XILINX_INTC is not set
# CONFIG_INGENIC_TCU_IRQ is not set
CONFIG_IRQ_UNIPHIER_AIDET=y
CONFIG_MESON_IRQ_GPIO=m
CONFIG_IMX_IRQSTEER=y
# CONFIG_IMX_INTMUX is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
CONFIG_MCHP_EIC=y
CONFIG_SUNPLUS_SP7021_INTC=y
# end of IRQ chip support

CONFIG_IPACK_BUS=m
CONFIG_BOARD_TPCI200=m
CONFIG_SERIAL_IPOCTAL=m
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_A10SR=y
CONFIG_RESET_ATH79=y
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_BRCMSTB is not set
CONFIG_RESET_BRCMSTB_RESCAL=m
# CONFIG_RESET_HSDK is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_K210 is not set
# CONFIG_RESET_LANTIQ is not set
CONFIG_RESET_LPC18XX=y
# CONFIG_RESET_MCHP_SPARX5 is not set
CONFIG_RESET_MESON=m
CONFIG_RESET_MESON_AUDIO_ARB=m
CONFIG_RESET_NPCM=y
CONFIG_RESET_PISTACHIO=y
CONFIG_RESET_QCOM_AOSS=m
CONFIG_RESET_QCOM_PDC=m
CONFIG_RESET_RASPBERRYPI=y
CONFIG_RESET_RZG2L_USBPHY_CTRL=m
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SOCFPGA=y
# CONFIG_RESET_STARFIVE_JH7100 is not set
CONFIG_RESET_SUNPLUS=y
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
CONFIG_RESET_TI_TPS380X=y
# CONFIG_RESET_TN48M_CPLD is not set
# CONFIG_RESET_UNIPHIER is not set
CONFIG_RESET_UNIPHIER_GLUE=m
# CONFIG_RESET_ZYNQ is not set
CONFIG_COMMON_RESET_HI3660=y
# CONFIG_COMMON_RESET_HI6220 is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
CONFIG_PHY_PISTACHIO_USB=m
# CONFIG_PHY_XGENE is not set
# CONFIG_USB_LGM_PHY is not set
CONFIG_PHY_CAN_TRANSCEIVER=y
CONFIG_PHY_SUN4I_USB=m
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
CONFIG_PHY_SUN9I_USB=y
CONFIG_PHY_SUN50I_USB3=m
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON8B_USB2 is not set
CONFIG_PHY_MESON_GXL_USB2=m
CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG=y
# CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
CONFIG_PHY_MESON_AXG_PCIE=y
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
CONFIG_PHY_MESON_AXG_MIPI_DPHY=y

#
# PHY drivers for Broadcom platforms
#
CONFIG_PHY_BCM63XX_USBH=y
CONFIG_PHY_CYGNUS_PCIE=y
CONFIG_PHY_BCM_SR_USB=m
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_CADENCE_TORRENT=y
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
CONFIG_PHY_CADENCE_SALVO=y
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
CONFIG_PHY_MIXEL_LVDS_PHY=m
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
CONFIG_PHY_HI6220_USB=y
# CONFIG_PHY_HI3660_USB is not set
CONFIG_PHY_HI3670_USB=m
CONFIG_PHY_HI3670_PCIE=y
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=m
CONFIG_PHY_INGENIC_USB=y
CONFIG_PHY_LANTIQ_VRX200_PCIE=m
CONFIG_PHY_LANTIQ_RCU_USB2=y
CONFIG_ARMADA375_USBCLUSTER_PHY=y
# CONFIG_PHY_BERLIN_SATA is not set
CONFIG_PHY_BERLIN_USB=m
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
# CONFIG_PHY_MVEBU_CP110_UTMI is not set
CONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_PXA_USB is not set
CONFIG_PHY_MMP3_USB=m
CONFIG_PHY_MMP3_HSIC=m
CONFIG_PHY_MTK_PCIE=m
CONFIG_PHY_MTK_TPHY=m
CONFIG_PHY_MTK_UFS=y
CONFIG_PHY_MTK_XSPHY=m
CONFIG_PHY_MTK_HDMI=y
CONFIG_PHY_MTK_MIPI_DSI=y
CONFIG_PHY_MTK_DP=y
CONFIG_PHY_SPARX5_SERDES=y
CONFIG_PHY_LAN966X_SERDES=m
CONFIG_PHY_CPCAP_USB=m
CONFIG_PHY_MAPPHONE_MDM6600=y
CONFIG_PHY_OCELOT_SERDES=m
# CONFIG_PHY_ATH79_USB is not set
CONFIG_PHY_QCOM_EDP=y
CONFIG_PHY_QCOM_IPQ4019_USB=y
CONFIG_PHY_QCOM_PCIE2=y
CONFIG_PHY_QCOM_QMP=y
# CONFIG_PHY_QCOM_QUSB2 is not set
CONFIG_PHY_QCOM_USB_HS=m
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
CONFIG_PHY_QCOM_USB_HS_28NM=y
CONFIG_PHY_QCOM_USB_SS=m
CONFIG_PHY_QCOM_IPQ806X_USB=y
CONFIG_PHY_MT7621_PCI=m
# CONFIG_PHY_RALINK_USB is not set
CONFIG_PHY_RCAR_GEN3_USB3=y
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
CONFIG_PHY_ROCKCHIP_INNO_HDMI=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=y
CONFIG_PHY_ROCKCHIP_PCIE=m
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
CONFIG_PHY_EXYNOS_DP_VIDEO=y
CONFIG_PHY_EXYNOS_MIPI_VIDEO=m
# CONFIG_PHY_EXYNOS_PCIE is not set
CONFIG_PHY_SAMSUNG_UFS=y
# CONFIG_PHY_SAMSUNG_USB2 is not set
CONFIG_PHY_EXYNOS5_USBDRD=m
CONFIG_PHY_UNIPHIER_USB2=y
CONFIG_PHY_UNIPHIER_USB3=y
CONFIG_PHY_UNIPHIER_PCIE=m
CONFIG_PHY_UNIPHIER_AHCI=y
CONFIG_PHY_ST_SPEAR1310_MIPHY=y
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
CONFIG_PHY_STIH407_USB=m
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PHY_TEGRA194_P2U=m
CONFIG_PHY_DA8XX_USB=y
CONFIG_PHY_DM816X_USB=m
CONFIG_PHY_AM654_SERDES=y
CONFIG_PHY_J721E_WIZ=y
CONFIG_OMAP_CONTROL_PHY=y
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_TUSB1210 is not set
CONFIG_PHY_INTEL_KEEMBAY_EMMC=y
CONFIG_PHY_INTEL_KEEMBAY_USB=y
CONFIG_PHY_INTEL_LGM_COMBO=y
CONFIG_PHY_INTEL_LGM_EMMC=y
CONFIG_PHY_INTEL_THUNDERBAY_EMMC=m
CONFIG_PHY_XILINX_ZYNQMP=m
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_DTPM=y
CONFIG_MCB=m
# CONFIG_MCB_PCI is not set
CONFIG_MCB_LPC=m
CONFIG_RAS=y
CONFIG_USB4=m
# CONFIG_USB4_DEBUGFS_WRITE is not set
CONFIG_USB4_KUNIT_TEST=y
CONFIG_USB4_DMA_TEST=m

#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
CONFIG_ANDROID_BINDER_IPC_SELFTEST=y
# end of Android

CONFIG_DAX=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_IMX_IIM is not set
CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_JZ4780_EFUSE=y
CONFIG_NVMEM_LPC18XX_EEPROM=m
# CONFIG_NVMEM_LPC18XX_OTP is not set
CONFIG_NVMEM_MXS_OCOTP=y
CONFIG_MTK_EFUSE=m
# CONFIG_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
CONFIG_QCOM_QFPROM=y
CONFIG_ROCKCHIP_EFUSE=y
CONFIG_ROCKCHIP_OTP=m
CONFIG_NVMEM_BCM_OCOTP=m
CONFIG_NVMEM_STM32_ROMEM=y
# CONFIG_UNIPHIER_EFUSE is not set
CONFIG_NVMEM_VF610_OCOTP=y
CONFIG_MESON_MX_EFUSE=y
# CONFIG_NVMEM_SNVS_LPGPR is not set
CONFIG_SC27XX_EFUSE=y
CONFIG_SPRD_EFUSE=y
# CONFIG_NVMEM_RMEM is not set
CONFIG_NVMEM_BRCM_NVRAM=m
CONFIG_NVMEM_LAYERSCAPE_SFP=y
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
CONFIG_NVMEM_APPLE_EFUSES=y

#
# HW tracing support
#
CONFIG_STM=y
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not set
# CONFIG_STM_DUMMY is not set
CONFIG_STM_SOURCE_CONSOLE=m
# CONFIG_STM_SOURCE_HEARTBEAT is not set
# CONFIG_STM_SOURCE_FTRACE is not set
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=m
# CONFIG_INTEL_TH_GTH is not set
CONFIG_INTEL_TH_STH=y
# CONFIG_INTEL_TH_MSU is not set
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_FSI is not set
CONFIG_TEE=y
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
# CONFIG_MUX_ADGS1408 is not set
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_SIOX=m
CONFIG_SIOX_BUS_GPIO=m
CONFIG_SLIMBUS=m
CONFIG_SLIM_QCOM_CTRL=m
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_IMX=m
# CONFIG_INTERCONNECT_IMX8MM is not set
CONFIG_INTERCONNECT_IMX8MN=m
CONFIG_INTERCONNECT_IMX8MQ=m
CONFIG_INTERCONNECT_IMX8MP=m
CONFIG_INTERCONNECT_QCOM_OSM_L3=y
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=y
CONFIG_104_QUAD_8=y
CONFIG_INTERRUPT_CNT=y
# CONFIG_STM32_TIMER_CNT is not set
CONFIG_STM32_LPTIMER_CNT=m
# CONFIG_TI_EQEP is not set
CONFIG_FTM_QUADDEC=y
# CONFIG_MICROCHIP_TCB_CAPTURE is not set
CONFIG_INTEL_QEP=m
# CONFIG_MOST is not set
CONFIG_PECI=m
CONFIG_PECI_CPU=m
CONFIG_PECI_ASPEED=m
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_EXT4_KUNIT_TESTS=m
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
# CONFIG_BTRFS_FS is not set
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
# CONFIG_F2FS_FS_LZO is not set
# CONFIG_F2FS_FS_LZ4 is not set
CONFIG_F2FS_FS_ZSTD=y
# CONFIG_F2FS_IOSTAT is not set
CONFIG_ZONEFS_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QFMT_V1=m
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=m
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_ONDEMAND=y
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set
CONFIG_NTFS3_FS=m
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_TMPFS_XATTR=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=m
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_CRAMFS=y
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
CONFIG_SQUASHFS_DECOMP_MULTI=y
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
# CONFIG_SQUASHFS_XATTR is not set
# CONFIG_SQUASHFS_ZLIB is not set
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
# CONFIG_SQUASHFS_XZ is not set
CONFIG_SQUASHFS_ZSTD=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=y
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_EROFS_FS=y
CONFIG_EROFS_FS_DEBUG=y
# CONFIG_EROFS_FS_XATTR is not set
# CONFIG_EROFS_FS_ZIP is not set
CONFIG_EROFS_FS_ONDEMAND=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=m
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=m
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=m
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
# CONFIG_NLS_UTF8 is not set
CONFIG_UNICODE=m
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_TRUSTED_KEYS_TEE=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_USER_DECRYPTED_DATA=y
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_KEY_NOTIFICATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
CONFIG_ZERO_CALL_USED_REGS=y
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_FIPS_NAME="Linux Kernel Cryptographic API"
# CONFIG_CRYPTO_FIPS_CUSTOM_VERSION is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
CONFIG_CRYPTO_ENGINE=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
# CONFIG_CRYPTO_ECRDSA is not set
CONFIG_CRYPTO_SM2=m
# CONFIG_CRYPTO_CURVE25519 is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XCTR=m
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_HCTR2=m
CONFIG_CRYPTO_ESSIV=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLYVAL=m
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_ARIA is not set
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=m
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_ALLWINNER=y
CONFIG_CRYPTO_DEV_HIFN_795X=y
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set
CONFIG_CRYPTO_DEV_S5P=y
# CONFIG_CRYPTO_DEV_EXYNOS_HASH is not set
# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
CONFIG_CRYPTO_DEV_ATMEL_AES=m
CONFIG_CRYPTO_DEV_ATMEL_TDES=y
CONFIG_CRYPTO_DEV_ATMEL_SHA=y
CONFIG_CRYPTO_DEV_ATMEL_I2C=m
CONFIG_CRYPTO_DEV_ATMEL_ECC=m
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_C3XXX=y
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
CONFIG_CRYPTO_DEV_QAT_4XXX=y
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=y
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=y
CONFIG_CRYPTO_DEV_QAT_C62XVF=y
CONFIG_CRYPTO_DEV_QCE=m
CONFIG_CRYPTO_DEV_QCE_SHA=y
# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set
CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA=y
# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
CONFIG_CRYPTO_DEV_ZYNQMP_AES=m
CONFIG_CRYPTO_DEV_ZYNQMP_SHA3=m
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_CRYPTO_DEV_SAFEXCEL=m
# CONFIG_CRYPTO_DEV_CCREE is not set
CONFIG_CRYPTO_DEV_HISI_SEC=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set
CONFIG_CRYPTO_DEV_SA2UL=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB=y
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS is not set
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU_HMAC_SHA224=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=m
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
# CONFIG_MODULE_SIG_KEY_TYPE_RSA is not set
CONFIG_MODULE_SIG_KEY_TYPE_ECDSA=y
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
CONFIG_PRIME_NUMBERS=m
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_STMP_DEVICE=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=m
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_DMA_API_DEBUG_SG is not set
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_SG_SPLIT=y
CONFIG_SG_POOL=y
CONFIG_STACKDEPOT=y
CONFIG_REF_TRACKER=y
CONFIG_SBITMAP=y
CONFIG_PARMAN=m
# CONFIG_OBJAGG is not set
# end of Library routines

CONFIG_ASN1_ENCODER=y
CONFIG_POLYNOMIAL=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_SYMBOLIC_ERRNAME=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_VMLINUX_MAP is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
CONFIG_NET_DEV_REFCNT_TRACKER=y
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
CONFIG_DEBUG_OBJECTS_TIMERS=y
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SHRINKER_DEBUG=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RAW_LOCK_NESTING=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_KOBJECT_RELEASE=y

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_LIST=y
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_SCALE_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_REF_SCALE_TEST=m
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_NOP_TRACER=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set

#
# openrisc Debugging
#
# end of openrisc Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
# CONFIG_KUNIT_DEBUGFS is not set
CONFIG_KUNIT_TEST=m
CONFIG_KUNIT_EXAMPLE_TEST=m
# CONFIG_KUNIT_ALL_TESTS is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAULT_INJECTION_USERCOPY=y
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=m
CONFIG_CPUMASK_KUNIT_TEST=m
CONFIG_TEST_LIST_SORT=y
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_SORT is not set
CONFIG_TEST_DIV64=m
CONFIG_BACKTRACE_SELF_TEST=m
CONFIG_TEST_REF_TRACKER=m
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
CONFIG_INTERVAL_TREE_TEST=y
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_TEST_HEXDUMP=m
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
CONFIG_TEST_SCANF=y
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_SIPHASH=y
CONFIG_TEST_IDA=y
# CONFIG_TEST_PARMAN is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_BITOPS=m
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
CONFIG_FIND_BIT_BENCHMARK=y
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_BITFIELD_KUNIT is not set
# CONFIG_HASH_KUNIT_TEST is not set
CONFIG_RESOURCE_KUNIT_TEST=y
CONFIG_SYSCTL_KUNIT_TEST=y
CONFIG_LIST_KUNIT_TEST=y
CONFIG_LINEAR_RANGES_TEST=y
# CONFIG_CMDLINE_KUNIT_TEST is not set
CONFIG_BITS_TEST=y
CONFIG_RATIONAL_KUNIT_TEST=y
CONFIG_MEMCPY_KUNIT_TEST=m
CONFIG_OVERFLOW_KUNIT_TEST=y
CONFIG_STACKINIT_KUNIT_TEST=y
CONFIG_TEST_UDELAY=m
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_FREE_PAGES is not set
# end of Kernel Testing and Coverage

CONFIG_WARN_MISSING_DOCUMENTS=y
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking

Re: [PATCH 03/26] fuse-bpf: Update uapi for fuse-bpf

[Paul Lawrence]

On Tue, Sep 27, 2022 at 11:19 AM Miklos Szeredi <miklos@szeredi.hu> wrote:
>
> On Tue, 27 Sept 2022 at 01:18, Daniel Rosenberg <drosen@google.com> wrote:
>
> > diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h
> > index d6ccee961891..8c80c146e69b 100644
> > --- a/include/uapi/linux/fuse.h
> > +++ b/include/uapi/linux/fuse.h
> > @@ -572,6 +572,17 @@ struct fuse_entry_out {
> >         struct fuse_attr attr;
> >  };
> >
> > +#define FUSE_ACTION_KEEP       0
> > +#define FUSE_ACTION_REMOVE     1
> > +#define FUSE_ACTION_REPLACE    2
> > +
> > +struct fuse_entry_bpf_out {
> > +       uint64_t        backing_action;
> > +       uint64_t        backing_fd;
>
> This is a security issue.   See this post from Jann:
>
> https://lore.kernel.org/all/CAG48ez17uXtjCTa7xpa=JWz3iBbNDQTKO2hvn6PAZtfW3kXgcA@mail.gmail.com/
>
> The fuse-passthrough series solved this by pre-registering the
> passthrogh fd with an ioctl. Since this requires an expicit syscall on
> the server side the attack is thwarted.
>
> It would be nice if this mechanism was agreed between these projects.
>
> BTW, does fuse-bpf provide a superset of fuse-passthrough?  I mean
> could fuse-bpf work with a NULL bpf program as a simple passthrough?
>
> Thanks,
> Miklos

To deal with the easy part. Yes, fuse-bpf can take a null bpf program, and
if you install that on files, it should behave exactly like bpf passthrough.

Our intent is that all accesses to the backing files go through the normal
vfs layer checks, so even once a backing file is installed, it can only be
accessed if the client already has sufficient rights. However, the same
statement seems to be true for the fuse passthrough code so I assume
that is not sufficient. I would be interested in further understanding the
remaining security issue (or is it defense in depth?) We understand that
the solution in fuse passthrough was to change the response to a fuse open
to be an ioctl? This would seem straightforward in fuse-bpf as well if it is
needed, though of course it would be in the lookup.

Thank you for reminding us of this,

Paul

Re: [PATCH 00/26] FUSE BPF: A Stacked Filesystem Extension for FUSE

[Daniel Rosenberg]

On Tue, Sep 27, 2022 at 11:41 PM Martin KaFai Lau <martin.lau@linux.dev> wrote:
>
> Interesting idea.
>
> Some comments on review logistics:
> - The set is too long and some of the individual patches are way too long for
> one single patch to review.  Keep in mind that not all of us here are experts in
> both fuse and bpf.  Making it easier to review first will help at the beginning.
>   Some ideas:
>
>    - Only implement a few ops in the initial revision. From quickly browsing the
> set, it is implementing the 'struct file_operations fuse_file_operations'?
> Maybe the first few revisions can start with a few of the ops first.
>

I've split it up a fair bit already, do you mean just sending a subset
of them at a time? I think the current splitting roughly allows for
that. Patch 1-4 and 5 deal with bpf/verifier code which isn't used
until patch 24. I can reorder/split up the opcodes arbitrarily.
Putting the op codes that implement file passthrough first makes
sense. The code is much easier to test when all/most are present,
since then I can just use patch 23 to mount without a daemon and run
xfs tests on them. At least initially I felt the whole stack was
useful to give the full picture.

>    - Please make the patches that can be applied to the bpf-next tree cleanly.
> For example, in patch 3, where is 18e2ec5bf453 coming from? I cannot find it in
> bpf-next and linux-next tree.
>    - Without applying it to an upstream tree cleanly, in a big set like this, I
> have no idea when bpf_prog_run() is called in patch 24 because the diff context
> is in fuse_bpf_cleanup and apparently it is not where the bpf prog is run.
>

Currently this is based off of
bf682942cd26ce9cd5e87f73ae099b383041e782 in
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
I would have rebased on top of bpf-next, except that from my
conversations at plumbers, I figured that the set up would need to
change significantly, and that effort would be wasted. My goal
including them here was to give more of a sense of what our needs are,
and be a starting point for working out what we really ought to be
using.

> Some high level comments on the set:
> - Instead of adding bpf helpers, you should consider kfunc instead. You can take
> a look at the recent HID patchset v10 or the recent nf conntrack bpf set.
>
> - Instead of expressing as packet data, using the recent dynptr is a better way
> to go for handling a mem blob.
>

I'll look into those, I remember them coming up at LPC. My current use
of packets/buffers does seem to abuse their intended meaning a bit.

> - iiuc, the idea is to allow bpf prog to optionally handle the 'struct
> file_operations' without going back to the user daemon? Have you looked at
> struct_ops which seems to be a better fit here?  If the bpf prog does not know
> how to handle an operation (or file?), it can call fuse_file_llseek (for
> example) as a kfunc to handle the request.
>

I wasn't aware of struct_ops. It looks like that may work for us
instead of making a new prog type. I'll definitely look into that.
I'll likely sign up for the bpf office hours next week.

> - The test SEC("test_trace") seems mostly a synthetic test for checking
> correctness.  Does it have a test that shows a more real life use case? or I
> have missed things in patch 26?
>

Patch 26 is pretty much all synthetic tests. A lot of them are just
ensuring that we even call in to the bpf program, and some limited
testing that changing the filters has the expected results. We
mentioned a few more concrete usecases in the LPC talk. One of those
is folder hiding. In Android we've had an issue with leaking the
existence of some apps to other apps. We needed to hide certain
directories from apps where they do have permissions to traverse the
directory. Attempting to access a folder without permissions would
result in EPERM, revealing the existence of that folder. Since the
application doesn't have permission to create arbitrary folders at
that level, we can hide it by using fuse-bpf to change the EPERM into
an ENOENT, and then filter readdir to remove disallowed entries. You
can see something like that in bpf_test_redact_readdir. We also have
some file level redaction. If an app doesn't have location
permissions, but does have file permissions, they could just read
picture metadata to get location information. We could have bpf
redirect reads that might contain location data to the daemon, while
passing through other parts.

> - Please use the skel to load the program.  It is pretty hard to read the loader
> in patch 26.

Yeah, patch 26 is not in great shape currently. I included it mostly
as something that exercises the code, and contains some example bpf
programs. Any suggestions on setting up the tests better are
appreciated.

>
> - I assume the main objective is for performance by not going back to the user
> daemon?  Do you have performance number?
>

I don't have any on hand from the current version. It's a little
tricky to know what numbers are relevant here since the numbers will
change greatly depending on what you do with it. In pure passthrough
without a bpf program, we were seeing performance pretty comparable to
the lower filesystem. Depending on how large of a bpf program we use
we were seeing pretty different slowdowns from that, though at least
some of that was from having a large switch statement.

Do you have any suggestions on what to test here? My thoughts would be
comparing lower fs performance to pure passthrough, to maybe the
example ll_passthrough in libfuse, but that doesn't really show any
bpf impact.

-Daniel

Re: [PATCH 00/26] FUSE BPF: A Stacked Filesystem Extension for FUSE

[Alexei Starovoitov]

On Fri, Sep 30, 2022 at 5:05 PM Daniel Rosenberg <drosen@google.com> wrote:
>
> >    - Please make the patches that can be applied to the bpf-next tree cleanly.
> > For example, in patch 3, where is 18e2ec5bf453 coming from? I cannot find it in
> > bpf-next and linux-next tree.
> >    - Without applying it to an upstream tree cleanly, in a big set like this, I
> > have no idea when bpf_prog_run() is called in patch 24 because the diff context
> > is in fuse_bpf_cleanup and apparently it is not where the bpf prog is run.
> >
>
> Currently this is based off of
> bf682942cd26ce9cd5e87f73ae099b383041e782 in
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> I would have rebased on top of bpf-next, except that from my
> conversations at plumbers, I figured that the set up would need to
> change significantly, and that effort would be wasted. My goal
> including them here was to give more of a sense of what our needs are,
> and be a starting point for working out what we really ought to be
> using.

It was a good idea to send it early :)

>
> > Some high level comments on the set:
> > - Instead of adding bpf helpers, you should consider kfunc instead. You can take
> > a look at the recent HID patchset v10 or the recent nf conntrack bpf set.
> >
> > - Instead of expressing as packet data, using the recent dynptr is a better way
> > to go for handling a mem blob.
> >
>
> I'll look into those, I remember them coming up at LPC. My current use
> of packets/buffers does seem to abuse their intended meaning a bit.

This 'abuse' is sorta, kinda, ok-ish. We can accept that,
but once you convert to kfunc interface you might realize that
"packet" abstraction is not necessary here and there are
cleaner alternatives. Have you looked at dynptr ?

> > - iiuc, the idea is to allow bpf prog to optionally handle the 'struct
> > file_operations' without going back to the user daemon? Have you looked at
> > struct_ops which seems to be a better fit here?  If the bpf prog does not know
> > how to handle an operation (or file?), it can call fuse_file_llseek (for
> > example) as a kfunc to handle the request.
> >
>
> I wasn't aware of struct_ops. It looks like that may work for us
> instead of making a new prog type. I'll definitely look into that.
> I'll likely sign up for the bpf office hours next week.

I have to second everything that Martin suggested.

To reiterate his points in different words:
. patch 26 with printk debug only gives very low
confidence that the presented api towards bpf programs
will be usable.
The patch series gotta have a production worthy bpf program
that actually does things you want it to do.

. please use kfunc mechanism similar to the way hid-bpf is doing.
If individual funcs are not enough and you need to attach
a set of bpf programs all at once then use struct_ops.
kfuncs are prefered if you don't need atomicity of a set of progs.
If it's fine to attach progs one at a time to different nop==empty
functions than just use a set of nop funcs and call back into
the kernel with kfuncs.
That would be easier to rip out when api turns out to
be insufficient or extensions are necessary.

> > - The test SEC("test_trace") seems mostly a synthetic test for checking
> > correctness.  Does it have a test that shows a more real life use case? or I
> > have missed things in patch 26?
> >
>
> Patch 26 is pretty much all synthetic tests. A lot of them are just
> ensuring that we even call in to the bpf program, and some limited
> testing that changing the filters has the expected results. We
> mentioned a few more concrete usecases in the LPC talk. One of those
> is folder hiding. In Android we've had an issue with leaking the
> existence of some apps to other apps. We needed to hide certain
> directories from apps where they do have permissions to traverse the
> directory. Attempting to access a folder without permissions would
> result in EPERM, revealing the existence of that folder. Since the
> application doesn't have permission to create arbitrary folders at
> that level, we can hide it by using fuse-bpf to change the EPERM into
> an ENOENT, and then filter readdir to remove disallowed entries. You
> can see something like that in bpf_test_redact_readdir. We also have
> some file level redaction. If an app doesn't have location
> permissions, but does have file permissions, they could just read
> picture metadata to get location information. We could have bpf
> redirect reads that might contain location data to the daemon, while
> passing through other parts.

The described use cases sound useful.
Just present them as real bpf progs.

My main concern, though, is with patches 7-25.
I don't understand file systems, but it looks like the patches
bring features into fuse from other file systems.
In many ways it looks like overlayfs.
Maybe just add bpf hooks to overlayfs?
Why fuse at all?
It might look like a bunch of nop functions sprinkled around overlayfs
code.
If you need to talk to user space from bpf prog you'll have
ringbuf and user_ringbuf to stream data from bpf prog to user
and back.

Re: [PATCH 00/26] FUSE BPF: A Stacked Filesystem Extension for FUSE

[Daniel Rosenberg]

On Wed, Sep 28, 2022 at 5:31 AM Brian Foster <bfoster@redhat.com> wrote:
>
> I had a similar thought when poking through this. A related question I
> had is how much of a functional dependency does the core passthrough
> mechanism have on bpf? If bpf is optional for filtering purposes and
> isn't absolutely necessary to set up a basic form of passthrough, I
> think review would be made easier by splitting off those core bits from
> the bpf components so each part is easier to review by people who know
> them best. For example, introduce all the fuse enhancements, hooks and
> cleanups to set up a passthrough to start the series, then plumb in the
> bpf filtering magic on top. Hm?
>

The passthrough code has no dependency on the bpf functionality. I can
reorder these patches to not have any bpf changes until patch 24. I'll
probably change the order like I described in my previous email. The
patches do become a lot more useful once the pre/post filters enter
the mix though.

> BTW if the bpf bits are optional, how might one mount a fuse/no
> daemon/passthrough filesystem from userspace? Is that possible with this
> series as is?
>
This is provided by patch 23. You can mount with the "no_daemon"
option. Anywhere FUSE attempts to call the daemon will end up with an
error, since the daemon is not connected. If you pair this with
"root_dir=[fd]" and optionally "root_bpf=[fd]", you can run in a
daemon-less passthrough mode. It's a bit less exciting though, since
at that point you're kind of doing a bind mount with extra steps.
Useful for testing though, and in theory you may be able to implement
most of a daemon in bpf.

> Something more on the fuse side.. it looks like we introduce a pattern
> where bits of generic request completion processing can end up
> duplicated between the shortcut (i.e.  _backing()/_finalize()) handlers
> and the traditional post request code, because the shortcuts basically
> bypass the entire rest of the codepath. For example, something like
> create_new_entry() is currently reused for several inode creation
> operations. With passthrough mode, it looks like some of that code (i.e.
> vfs dentry fixups) is split off from create_new_entry() into each
> individual backing mode handler.
>
> It looks like much of the lower level request processing code was
> refactored into the fuse_iqueue to support things like virtiofs. Have
> you looked into whether that abstraction can be reused or enhanced to
> support bpf filtering, direct passthrough calls, etc.? Or perhaps
> whether more of the higher level code could be refactored in a similar
> way to encourage more reuse and avoid branching off every fs operation
> into a special passthrough codepath?
>
> Brian
>

The largest opportunity for reducing duplicate code would probably be
trying to unify the backing calls between overlayfs and our work here.
In places where you need to do more work than directly calling the
relevant vfs calls we probably could factor out some common helpers. I
haven't looked too much into that yet since I want to see where the
fuse-bpf code ends up before I try to commit to that. I've thought
about unifying some of the code around node creation in the backing
implementations, but haven't gotten around to it yet. We definitely
need to branch off for every operation though, since fuse otherwise
has no concept of the backing filesystem. We do have some more work to
do to ensure there is a clean handoff between regular fuse and
fuse-bpf. The goal is to be able to handle just the parts you need to
in the daemon, while the rest can be passed through if you're acting
as a stacked filesystem. There are some oddities around things fuse
does for efficiency that fuse-bpf doesn't need to do. For instance, if
you're using passthrough for getattr, you don't really need to do a
readdir_plus, since you don't have to worry about all the extra daemon
requests.

-Daniel

Re: [PATCH 15/26] fuse-bpf: Add support for read/write iter

[Amir Goldstein]

On Tue, Sep 27, 2022 at 2:46 AM Daniel Rosenberg <drosen@google.com> wrote:
>
> Signed-off-by: Daniel Rosenberg <drosen@google.com>
> Signed-off-by: Paul Lawrence <paullawrence@google.com>
> ---
>  fs/fuse/backing.c | 291 ++++++++++++++++++++++++++++++++++++++++++++++
>  fs/fuse/control.c |   2 +-
>  fs/fuse/file.c    |  28 +++++
>  fs/fuse/fuse_i.h  |  42 ++++++-
>  fs/fuse/inode.c   |  13 +++
>  5 files changed, 374 insertions(+), 2 deletions(-)
>
> diff --git a/fs/fuse/backing.c b/fs/fuse/backing.c
> index 1fe61177cdfb..cf4ad9f4fe10 100644
> --- a/fs/fuse/backing.c
> +++ b/fs/fuse/backing.c
> @@ -12,6 +12,47 @@
>  #include <linux/namei.h>
>  #include <linux/bpf_fuse.h>
>
> +#define FUSE_BPF_IOCB_MASK (IOCB_APPEND | IOCB_DSYNC | IOCB_HIPRI | IOCB_NOWAIT | IOCB_SYNC)
> +
> +struct fuse_bpf_aio_req {
> +       struct kiocb iocb;
> +       refcount_t ref;
> +       struct kiocb *iocb_orig;
> +};
> +
> +static struct kmem_cache *fuse_bpf_aio_request_cachep;
> +
> +static void fuse_file_accessed(struct file *dst_file, struct file *src_file)
> +{
> +       struct inode *dst_inode;
> +       struct inode *src_inode;
> +
> +       if (dst_file->f_flags & O_NOATIME)
> +               return;
> +
> +       dst_inode = file_inode(dst_file);
> +       src_inode = file_inode(src_file);
> +
> +       if ((!timespec64_equal(&dst_inode->i_mtime, &src_inode->i_mtime) ||
> +            !timespec64_equal(&dst_inode->i_ctime, &src_inode->i_ctime))) {
> +               dst_inode->i_mtime = src_inode->i_mtime;
> +               dst_inode->i_ctime = src_inode->i_ctime;
> +       }
> +
> +       touch_atime(&dst_file->f_path);
> +}
> +
> +static void fuse_copyattr(struct file *dst_file, struct file *src_file)
> +{
> +       struct inode *dst = file_inode(dst_file);
> +       struct inode *src = file_inode(src_file);
> +
> +       dst->i_atime = src->i_atime;
> +       dst->i_mtime = src->i_mtime;
> +       dst->i_ctime = src->i_ctime;
> +       i_size_write(dst, i_size_read(src));
> +}
> +
>  struct bpf_prog *fuse_get_bpf_prog(struct file *file)
>  {
>         struct bpf_prog *bpf_prog = ERR_PTR(-EINVAL);
> @@ -469,6 +510,241 @@ int fuse_lseek_finalize(struct bpf_fuse_args *fa, loff_t *out,
>         return 0;
>  }
>
> +static inline void fuse_bpf_aio_put(struct fuse_bpf_aio_req *aio_req)
> +{
> +       if (refcount_dec_and_test(&aio_req->ref))
> +               kmem_cache_free(fuse_bpf_aio_request_cachep, aio_req);
> +}
> +
> +static void fuse_bpf_aio_cleanup_handler(struct fuse_bpf_aio_req *aio_req)
> +{
> +       struct kiocb *iocb = &aio_req->iocb;
> +       struct kiocb *iocb_orig = aio_req->iocb_orig;
> +
> +       if (iocb->ki_flags & IOCB_WRITE) {
> +               __sb_writers_acquired(file_inode(iocb->ki_filp)->i_sb,
> +                                     SB_FREEZE_WRITE);
> +               file_end_write(iocb->ki_filp);
> +               fuse_copyattr(iocb_orig->ki_filp, iocb->ki_filp);
> +       }
> +       iocb_orig->ki_pos = iocb->ki_pos;
> +       fuse_bpf_aio_put(aio_req);
> +}
> +
> +static void fuse_bpf_aio_rw_complete(struct kiocb *iocb, long res)
> +{
> +       struct fuse_bpf_aio_req *aio_req =
> +               container_of(iocb, struct fuse_bpf_aio_req, iocb);
> +       struct kiocb *iocb_orig = aio_req->iocb_orig;
> +
> +       fuse_bpf_aio_cleanup_handler(aio_req);
> +       iocb_orig->ki_complete(iocb_orig, res);
> +}
> +
> +int fuse_file_read_iter_initialize_in(struct bpf_fuse_args *fa, struct fuse_file_read_iter_io *fri,
> +                                     struct kiocb *iocb, struct iov_iter *to)
> +{
> +       struct file *file = iocb->ki_filp;
> +       struct fuse_file *ff = file->private_data;
> +
> +       fri->fri = (struct fuse_read_in) {
> +               .fh = ff->fh,
> +               .offset = iocb->ki_pos,
> +               .size = to->count,
> +       };
> +
> +       /* TODO we can't assume 'to' is a kvec */
> +       /* TODO we also can't assume the vector has only one component */
> +       *fa = (struct bpf_fuse_args) {
> +               .opcode = FUSE_READ,
> +               .nodeid = ff->nodeid,
> +               .in_numargs = 1,
> +               .in_args[0].size = sizeof(fri->fri),
> +               .in_args[0].value = &fri->fri,
> +               /*
> +                * TODO Design this properly.
> +                * Possible approach: do not pass buf to bpf
> +                * If going to userland, do a deep copy
> +                * For extra credit, do that to/from the vector, rather than
> +                * making an extra copy in the kernel
> +                */
> +       };
> +
> +       return 0;
> +}
> +
> +int fuse_file_read_iter_initialize_out(struct bpf_fuse_args *fa, struct fuse_file_read_iter_io *fri,
> +                                      struct kiocb *iocb, struct iov_iter *to)
> +{
> +       fri->frio = (struct fuse_read_iter_out) {
> +               .ret = fri->fri.size,
> +       };
> +
> +       fa->out_numargs = 1;
> +       fa->out_args[0].size = sizeof(fri->frio);
> +       fa->out_args[0].value = &fri->frio;
> +
> +       return 0;
> +}
> +
> +int fuse_file_read_iter_backing(struct bpf_fuse_args *fa, ssize_t *out,
> +                               struct kiocb *iocb, struct iov_iter *to)
> +{
> +       struct fuse_read_iter_out *frio = fa->out_args[0].value;
> +       struct file *file = iocb->ki_filp;
> +       struct fuse_file *ff = file->private_data;
> +
> +       if (!iov_iter_count(to))
> +               return 0;
> +
> +       if ((iocb->ki_flags & IOCB_DIRECT) &&
> +           (!ff->backing_file->f_mapping->a_ops ||
> +            !ff->backing_file->f_mapping->a_ops->direct_IO))
> +               return -EINVAL;
> +
> +       /* TODO This just plain ignores any change to fuse_read_in */
> +       if (is_sync_kiocb(iocb)) {
> +               *out = vfs_iter_read(ff->backing_file, to, &iocb->ki_pos,
> +                               iocb_to_rw_flags(iocb->ki_flags, FUSE_BPF_IOCB_MASK));
> +       } else {
> +               struct fuse_bpf_aio_req *aio_req;
> +
> +               *out = -ENOMEM;
> +               aio_req = kmem_cache_zalloc(fuse_bpf_aio_request_cachep, GFP_KERNEL);
> +               if (!aio_req)
> +                       goto out;
> +
> +               aio_req->iocb_orig = iocb;
> +               kiocb_clone(&aio_req->iocb, iocb, ff->backing_file);
> +               aio_req->iocb.ki_complete = fuse_bpf_aio_rw_complete;
> +               refcount_set(&aio_req->ref, 2);
> +               *out = vfs_iocb_iter_read(ff->backing_file, &aio_req->iocb, to);
> +               fuse_bpf_aio_put(aio_req);
> +               if (*out != -EIOCBQUEUED)
> +                       fuse_bpf_aio_cleanup_handler(aio_req);
> +       }
> +
> +       frio->ret = *out;
> +
> +       /* TODO Need to point value at the buffer for post-modification */
> +
> +out:
> +       fuse_file_accessed(file, ff->backing_file);
> +
> +       return *out;
> +}
> +
> +int fuse_file_read_iter_finalize(struct bpf_fuse_args *fa, ssize_t *out,
> +                                struct kiocb *iocb, struct iov_iter *to)
> +{
> +       struct fuse_read_iter_out *frio = fa->out_args[0].value;
> +
> +       *out = frio->ret;
> +
> +       return 0;
> +}
> +
> +int fuse_file_write_iter_initialize_in(struct bpf_fuse_args *fa,
> +                                      struct fuse_file_write_iter_io *fwio,
> +                                      struct kiocb *iocb, struct iov_iter *from)
> +{
> +       struct file *file = iocb->ki_filp;
> +       struct fuse_file *ff = file->private_data;
> +
> +       *fwio = (struct fuse_file_write_iter_io) {
> +               .fwi.fh = ff->fh,
> +               .fwi.offset = iocb->ki_pos,
> +               .fwi.size = from->count,
> +       };
> +
> +       /* TODO we can't assume 'from' is a kvec */
> +       *fa = (struct bpf_fuse_args) {
> +               .opcode = FUSE_WRITE,
> +               .nodeid = ff->nodeid,
> +               .in_numargs = 2,
> +               .in_args[0].size = sizeof(fwio->fwi),
> +               .in_args[0].value = &fwio->fwi,
> +               .in_args[1].size = fwio->fwi.size,
> +               .in_args[1].value = from->kvec->iov_base,
> +       };
> +
> +       return 0;
> +}
> +
> +int fuse_file_write_iter_initialize_out(struct bpf_fuse_args *fa,
> +                                       struct fuse_file_write_iter_io *fwio,
> +                                       struct kiocb *iocb, struct iov_iter *from)
> +{
> +       /* TODO we can't assume 'from' is a kvec */
> +       fa->out_numargs = 1;
> +       fa->out_args[0].size = sizeof(fwio->fwio);
> +       fa->out_args[0].value = &fwio->fwio;
> +
> +       return 0;
> +}
> +
> +int fuse_file_write_iter_backing(struct bpf_fuse_args *fa, ssize_t *out,
> +                                struct kiocb *iocb, struct iov_iter *from)
> +{
> +       struct file *file = iocb->ki_filp;
> +       struct fuse_file *ff = file->private_data;
> +       struct fuse_write_iter_out *fwio = fa->out_args[0].value;
> +
> +       if (!iov_iter_count(from))
> +               return 0;
> +
> +       /* TODO This just plain ignores any change to fuse_write_in */
> +       /* TODO uint32_t seems smaller than ssize_t.... right? */
> +       inode_lock(file_inode(file));
> +
> +       fuse_copyattr(file, ff->backing_file);
> +
> +       if (is_sync_kiocb(iocb)) {
> +               file_start_write(ff->backing_file);
> +               *out = vfs_iter_write(ff->backing_file, from, &iocb->ki_pos,
> +                                          iocb_to_rw_flags(iocb->ki_flags, FUSE_BPF_IOCB_MASK));
> +               file_end_write(ff->backing_file);
> +
> +               /* Must reflect change in size of backing file to upper file */
> +               if (*out > 0)
> +                       fuse_copyattr(file, ff->backing_file);

Regarding attribute cache, things can get a tad more complicated
when the inode is not purely passthrough.

To put things in context, the reason that ovl_copyattr() is correct
in ovl_write_iter() is because the overlayfs inode is purely passthrough
to the backing inode, that is, all operations are passthrough.
The only incident when backing inode changes (copy up) takes
care of copying inode attributes.

This is not the case with FUSE passthrough.
Not in Alessio's FUSE_PASSTHROUGH patches and not in
this proposal.

With FUSE passthrough, every inode is hybrid, some operations
can be served from the backing inode and some operations served
from the server.

My FUSE passthrough branch [1] has two fixes on top of Allesio's patches
to fix two issues regarding attribute caches (size and times).

[1] https://github.com/amir73il/linux/commits/linux-5.10.y-fuse-passthrough

This problem is not unique to FUSE.
It also exists for attribute caches of NFS clients and the NFS protocol
has several techniques to deal with this problem, but it is certainly not
a trivial issue.

As a matter of fact, I found the problems fixed in my branch above
by running the nfstest_posix [2] tests on the FUSE passthrough code.

[2] https://wiki.linux-nfs.org/wiki/index.php/NFStest#nfstest_posix_-_POSIX_file_system_level_access_tests

The easiest way out is to declare one of the copies (backing or remote)
the authoritative copy w.r.t. attributes (like noac nfs mount option).
Declaring the remote attribute copy authoritative (as FUSE usually does)
has performance implications.

I guess if FUSE-bpf attaches a backing inode to FUSE inode on lookup
then the option of making the backing inode attributes authoritative
(like in overlayfs) is valid, but I think this needs to be spelled out.

Thanks,
Amir.

Re: [PATCH 03/26] fuse-bpf: Update uapi for fuse-bpf

[Amir Goldstein]

On Sat, Oct 1, 2022 at 1:03 AM Paul Lawrence <paullawrence@google.com> wrote:
>
> On Tue, Sep 27, 2022 at 11:19 AM Miklos Szeredi <miklos@szeredi.hu> wrote:
> >
> > On Tue, 27 Sept 2022 at 01:18, Daniel Rosenberg <drosen@google.com> wrote:
> >
> > > diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h
> > > index d6ccee961891..8c80c146e69b 100644
> > > --- a/include/uapi/linux/fuse.h
> > > +++ b/include/uapi/linux/fuse.h
> > > @@ -572,6 +572,17 @@ struct fuse_entry_out {
> > >         struct fuse_attr attr;
> > >  };
> > >
> > > +#define FUSE_ACTION_KEEP       0
> > > +#define FUSE_ACTION_REMOVE     1
> > > +#define FUSE_ACTION_REPLACE    2
> > > +
> > > +struct fuse_entry_bpf_out {
> > > +       uint64_t        backing_action;
> > > +       uint64_t        backing_fd;
> >
> > This is a security issue.   See this post from Jann:
> >
> > https://lore.kernel.org/all/CAG48ez17uXtjCTa7xpa=JWz3iBbNDQTKO2hvn6PAZtfW3kXgcA@mail.gmail.com/
> >
> > The fuse-passthrough series solved this by pre-registering the
> > passthrogh fd with an ioctl. Since this requires an expicit syscall on
> > the server side the attack is thwarted.
> >
> > It would be nice if this mechanism was agreed between these projects.
> >
> > BTW, does fuse-bpf provide a superset of fuse-passthrough?  I mean
> > could fuse-bpf work with a NULL bpf program as a simple passthrough?
> >
> > Thanks,
> > Miklos
>
> To deal with the easy part. Yes, fuse-bpf can take a null bpf program, and
> if you install that on files, it should behave exactly like bpf passthrough.
>
> Our intent is that all accesses to the backing files go through the normal
> vfs layer checks, so even once a backing file is installed, it can only be
> accessed if the client already has sufficient rights. However, the same
> statement seems to be true for the fuse passthrough code so I assume
> that is not sufficient. I would be interested in further understanding the
> remaining security issue (or is it defense in depth?) We understand that
> the solution in fuse passthrough was to change the response to a fuse open
> to be an ioctl? This would seem straightforward in fuse-bpf as well if it is
> needed, though of course it would be in the lookup.

Not only in lookup.
In lookup userspace can install an O_PATH fd for backing_path,
but userspace will also need to install readable/writeable fds
as backing_file to be used by open to match the open mode.

When talking about the server-less passthrough mode, some
security model like overlayfs mounter creds model will need to be
employed, although in the private case of one-to-one passthrough
I guess using the caller creds should be good enough, as long as
the security model is spelled out and implementation is audited.

Thanks,
Amir.

Re: [PATCH 00/26] FUSE BPF: A Stacked Filesystem Extension for FUSE

[Martin KaFai Lau]

On 9/30/22 5:05 PM, Daniel Rosenberg wrote:
> On Tue, Sep 27, 2022 at 11:41 PM Martin KaFai Lau <martin.lau@linux.dev> wrote:
>>
>> Interesting idea.
>>
>> Some comments on review logistics:
>> - The set is too long and some of the individual patches are way too long for
>> one single patch to review.  Keep in mind that not all of us here are experts in
>> both fuse and bpf.  Making it easier to review first will help at the beginning.
>>    Some ideas:
>>
>>     - Only implement a few ops in the initial revision. From quickly browsing the
>> set, it is implementing the 'struct file_operations fuse_file_operations'?
>> Maybe the first few revisions can start with a few of the ops first.
>>
> 
> I've split it up a fair bit already, do you mean just sending a subset
> of them at a time? I think the current splitting roughly allows for
> that. Patch 1-4 and 5 deal with bpf/verifier code which isn't used
> until patch 24. I can reorder/split up the opcodes arbitrarily.


> Putting the op codes that implement file passthrough first makes
> sense. The code is much easier to test when all/most are present,
> since then I can just use patch 23 to mount without a daemon and run
> xfs tests on them. At least initially I felt the whole stack was
> useful to give the full picture.

I don't mind to have all op codes in each re-spin as long as it can apply 
cleanly to bpf-next where the bpf implementation part will eventually land. 
Patch 26 has to split up though.  It is a few thousand lines in one patch.

I was just thinking to only do a few op codes, eg. the few android use cases you 
have mentioned.  My feeling is other op codes should not be very different in 
term of the bpf side implementation (or it is not true?).  When the patch set 
getting enough traction, then start adding more op codes in the later revisions. 
  That will likely help to re-spin faster and save you time also.


>> - iiuc, the idea is to allow bpf prog to optionally handle the 'struct
>> file_operations' without going back to the user daemon? Have you looked at
>> struct_ops which seems to be a better fit here?  If the bpf prog does not know
>> how to handle an operation (or file?), it can call fuse_file_llseek (for
>> example) as a kfunc to handle the request.
>>
> 
> I wasn't aware of struct_ops. It looks like that may work for us
> instead of making a new prog type. I'll definitely look into that.
> I'll likely sign up for the bpf office hours next week.

You can take a look at the tools/testing/selftests/bpf/progs/bpf_cubic.c.
It implements the whole tcp congestion in bpf. In particular, the bpf prog is 
implementing the kernel 'struct tcp_congestion_ops'.  That selftest example is 
pretty much a direct copy from the kernel net/ipv4/tcp_cubic.c.  Also, in 
BPF_STRUCT_OPS(bpf_cubic_undo_cwnd, ...), it is directly calling the kfunc's 
tcp_reno_undo_cwnd() when the bpf prog does not need to do anything different 
from the kernel's tcp_reno_undo_cwnd().  Look at how it is marked as __ksym in 
bpf_cubic.c

However, echoing Alexei's earlier reply, struct_ops is good when it needs to 
implement a well defined 'struct xyz_operations' that has all function pointer 
in it.  Taking another skim at the set, it seems like it is mostly trying to 
intercept the fuse_simple_request() call?