From: Ashutosh Dixit <ashutosh.dixit@intel.com> To: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org, Rodrigo Vivi <rodrigo.vivi@intel.com> Subject: [PATCH drm-intel-fixes] drm/i915/gt: Perf_limit_reasons are only available for Gen11+ Date: Wed, 28 Sep 2022 11:08:26 -0700 [thread overview] Message-ID: <20220928180826.3182079-1-ashutosh.dixit@intel.com> (raw) Register GT0_PERF_LIMIT_REASONS (0x1381a8) is available only for Gen11+. Therefore ensure perf_limit_reasons sysfs files are created only for Gen11+. Otherwise on Gen < 5 accessing these files results in the following oops: <1> [88.829420] BUG: unable to handle page fault for address: ffffc90000bb81a8 <1> [88.829438] #PF: supervisor read access in kernel mode <1> [88.829447] #PF: error_code(0x0000) - not-present page Bspec: 20008 Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/6863 Fixes: fa68bff7cf27 ("drm/i915/gt: Add sysfs throttle frequency interfaces") Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> --- drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c b/drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c index 73a8b46e0234..d09a0e845d09 100644 --- a/drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c +++ b/drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c @@ -545,8 +545,7 @@ static INTEL_GT_RPS_BOOL_ATTR_RO(throttle_reason_ratl, RATL_MASK); static INTEL_GT_RPS_BOOL_ATTR_RO(throttle_reason_vr_thermalert, VR_THERMALERT_MASK); static INTEL_GT_RPS_BOOL_ATTR_RO(throttle_reason_vr_tdc, VR_TDC_MASK); -static const struct attribute *freq_attrs[] = { - &dev_attr_punit_req_freq_mhz.attr, +static const struct attribute *throttle_reason_attrs[] = { &attr_throttle_reason_status.attr, &attr_throttle_reason_pl1.attr, &attr_throttle_reason_pl2.attr, @@ -763,12 +762,20 @@ void intel_gt_sysfs_pm_init(struct intel_gt *gt, struct kobject *kobj) if (!is_object_gt(kobj)) return; - ret = sysfs_create_files(kobj, freq_attrs); + ret = sysfs_create_file(kobj, &dev_attr_punit_req_freq_mhz.attr); if (ret) drm_warn(>->i915->drm, - "failed to create gt%u throttle sysfs files (%pe)", + "failed to create gt%u punit_req_freq_mhz sysfs (%pe)", gt->info.id, ERR_PTR(ret)); + if (GRAPHICS_VER(gt->i915) >= 11) { + ret = sysfs_create_files(kobj, throttle_reason_attrs); + if (ret) + drm_warn(>->i915->drm, + "failed to create gt%u throttle sysfs files (%pe)", + gt->info.id, ERR_PTR(ret)); + } + if (HAS_MEDIA_RATIO_MODE(gt->i915) && intel_uc_uses_guc_slpc(>->uc)) { ret = sysfs_create_files(kobj, media_perf_power_attrs); if (ret) -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Ashutosh Dixit <ashutosh.dixit@intel.com> To: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org, Rodrigo Vivi <rodrigo.vivi@intel.com> Subject: [Intel-gfx] [PATCH drm-intel-fixes] drm/i915/gt: Perf_limit_reasons are only available for Gen11+ Date: Wed, 28 Sep 2022 11:08:26 -0700 [thread overview] Message-ID: <20220928180826.3182079-1-ashutosh.dixit@intel.com> (raw) Register GT0_PERF_LIMIT_REASONS (0x1381a8) is available only for Gen11+. Therefore ensure perf_limit_reasons sysfs files are created only for Gen11+. Otherwise on Gen < 5 accessing these files results in the following oops: <1> [88.829420] BUG: unable to handle page fault for address: ffffc90000bb81a8 <1> [88.829438] #PF: supervisor read access in kernel mode <1> [88.829447] #PF: error_code(0x0000) - not-present page Bspec: 20008 Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/6863 Fixes: fa68bff7cf27 ("drm/i915/gt: Add sysfs throttle frequency interfaces") Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> --- drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c b/drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c index 73a8b46e0234..d09a0e845d09 100644 --- a/drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c +++ b/drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c @@ -545,8 +545,7 @@ static INTEL_GT_RPS_BOOL_ATTR_RO(throttle_reason_ratl, RATL_MASK); static INTEL_GT_RPS_BOOL_ATTR_RO(throttle_reason_vr_thermalert, VR_THERMALERT_MASK); static INTEL_GT_RPS_BOOL_ATTR_RO(throttle_reason_vr_tdc, VR_TDC_MASK); -static const struct attribute *freq_attrs[] = { - &dev_attr_punit_req_freq_mhz.attr, +static const struct attribute *throttle_reason_attrs[] = { &attr_throttle_reason_status.attr, &attr_throttle_reason_pl1.attr, &attr_throttle_reason_pl2.attr, @@ -763,12 +762,20 @@ void intel_gt_sysfs_pm_init(struct intel_gt *gt, struct kobject *kobj) if (!is_object_gt(kobj)) return; - ret = sysfs_create_files(kobj, freq_attrs); + ret = sysfs_create_file(kobj, &dev_attr_punit_req_freq_mhz.attr); if (ret) drm_warn(>->i915->drm, - "failed to create gt%u throttle sysfs files (%pe)", + "failed to create gt%u punit_req_freq_mhz sysfs (%pe)", gt->info.id, ERR_PTR(ret)); + if (GRAPHICS_VER(gt->i915) >= 11) { + ret = sysfs_create_files(kobj, throttle_reason_attrs); + if (ret) + drm_warn(>->i915->drm, + "failed to create gt%u throttle sysfs files (%pe)", + gt->info.id, ERR_PTR(ret)); + } + if (HAS_MEDIA_RATIO_MODE(gt->i915) && intel_uc_uses_guc_slpc(>->uc)) { ret = sysfs_create_files(kobj, media_perf_power_attrs); if (ret) -- 2.34.1
next reply other threads:[~2022-09-28 18:08 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-28 18:08 Ashutosh Dixit [this message] 2022-09-28 18:08 ` [Intel-gfx] [PATCH drm-intel-fixes] drm/i915/gt: Perf_limit_reasons are only available for Gen11+ Ashutosh Dixit
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220928180826.3182079-1-ashutosh.dixit@intel.com \ --to=ashutosh.dixit@intel.com \ --cc=dri-devel@lists.freedesktop.org \ --cc=intel-gfx@lists.freedesktop.org \ --cc=rodrigo.vivi@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.