* [PATCH] ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp157c-ev1
@ 2022-09-30 14:56 ` Fabrice Gasnier
0 siblings, 0 replies; 4+ messages in thread
From: Fabrice Gasnier @ 2022-09-30 14:56 UTC (permalink / raw)
To: alexandre.torgue, robh+dt, krzysztof.kozlowski+dt
Cc: amelie.delaunay, devicetree, linux-arm-kernel, linux-kernel,
linux-stm32, fabrice.gasnier
Add support for USB2514B onboard hub on stm32mp157c EV1 board. The HUB
is supplied by a 3v3 PMIC regulator.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
arch/arm/boot/dts/stm32mp157c-ev1.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index e22e394832a8..a0ff92662e02 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -362,6 +362,14 @@ &usart3 {
&usbh_ehci {
phys = <&usbphyc_port0>;
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* onboard HUB */
+ hub@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ vdd-supply = <&v3v3>;
+ };
};
&usbotg_hs {
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp157c-ev1
@ 2022-09-30 14:56 ` Fabrice Gasnier
0 siblings, 0 replies; 4+ messages in thread
From: Fabrice Gasnier @ 2022-09-30 14:56 UTC (permalink / raw)
To: alexandre.torgue, robh+dt, krzysztof.kozlowski+dt
Cc: amelie.delaunay, devicetree, linux-arm-kernel, linux-kernel,
linux-stm32, fabrice.gasnier
Add support for USB2514B onboard hub on stm32mp157c EV1 board. The HUB
is supplied by a 3v3 PMIC regulator.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
arch/arm/boot/dts/stm32mp157c-ev1.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index e22e394832a8..a0ff92662e02 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -362,6 +362,14 @@ &usart3 {
&usbh_ehci {
phys = <&usbphyc_port0>;
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* onboard HUB */
+ hub@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ vdd-supply = <&v3v3>;
+ };
};
&usbotg_hs {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp157c-ev1
2022-09-30 14:56 ` Fabrice Gasnier
@ 2022-10-24 8:25 ` Alexandre TORGUE
-1 siblings, 0 replies; 4+ messages in thread
From: Alexandre TORGUE @ 2022-10-24 8:25 UTC (permalink / raw)
To: Fabrice Gasnier, robh+dt, krzysztof.kozlowski+dt
Cc: amelie.delaunay, devicetree, linux-arm-kernel, linux-kernel, linux-stm32
Hi Fabrice,
On 9/30/22 16:56, Fabrice Gasnier wrote:
> Add support for USB2514B onboard hub on stm32mp157c EV1 board. The HUB
> is supplied by a 3v3 PMIC regulator.
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> ---
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> index e22e394832a8..a0ff92662e02 100644
> --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> @@ -362,6 +362,14 @@ &usart3 {
> &usbh_ehci {
> phys = <&usbphyc_port0>;
> status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + /* onboard HUB */
> + hub@1 {
> + compatible = "usb424,2514";
> + reg = <1>;
> + vdd-supply = <&v3v3>;
> + };
> };
>
> &usbotg_hs {
Applied on stm32-next.
Thanks
Alex
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp157c-ev1
@ 2022-10-24 8:25 ` Alexandre TORGUE
0 siblings, 0 replies; 4+ messages in thread
From: Alexandre TORGUE @ 2022-10-24 8:25 UTC (permalink / raw)
To: Fabrice Gasnier, robh+dt, krzysztof.kozlowski+dt
Cc: amelie.delaunay, devicetree, linux-arm-kernel, linux-kernel, linux-stm32
Hi Fabrice,
On 9/30/22 16:56, Fabrice Gasnier wrote:
> Add support for USB2514B onboard hub on stm32mp157c EV1 board. The HUB
> is supplied by a 3v3 PMIC regulator.
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> ---
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> index e22e394832a8..a0ff92662e02 100644
> --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> @@ -362,6 +362,14 @@ &usart3 {
> &usbh_ehci {
> phys = <&usbphyc_port0>;
> status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + /* onboard HUB */
> + hub@1 {
> + compatible = "usb424,2514";
> + reg = <1>;
> + vdd-supply = <&v3v3>;
> + };
> };
>
> &usbotg_hs {
Applied on stm32-next.
Thanks
Alex
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-10-24 8:27 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-30 14:56 [PATCH] ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp157c-ev1 Fabrice Gasnier
2022-09-30 14:56 ` Fabrice Gasnier
2022-10-24 8:25 ` Alexandre TORGUE
2022-10-24 8:25 ` Alexandre TORGUE
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.