All of lore.kernel.org
 help / color / mirror / Atom feed
From: Harry Austen <hpausten@protonmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Harry Austen <hpausten@protonmail.com>,
	Yassine Oudjana <y.oudjana@protonmail.com>,
	Andy Gross <agross@kernel.org>,
	Konrad Dybcio <konrad.dybcio@somainline.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org
Subject: [PATCH 1/4] arm64: dts: qcom: msm8996: standardize blsp indexing
Date: Fri, 21 Oct 2022 14:23:47 +0000	[thread overview]
Message-ID: <20221021142242.129276-2-hpausten@protonmail.com> (raw)
In-Reply-To: <20221021142242.129276-1-hpausten@protonmail.com>

Use one-based indexing throughout the file for BLSP devices to avoid
confusion. Most of the node names and labels are consistent already.
This patch just fixes a few pinconf node names to match the one-based
indexing used in the label names.

Signed-off-by: Harry Austen <hpausten@protonmail.com>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index c0a2baffa49d..80590267dfd0 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1286,14 +1286,14 @@ blsp1_spi1_sleep: blsp1-spi1-sleep {
 				bias-pull-down;
 			};

-			blsp2_uart2_2pins_default: blsp2-uart1-2pins {
+			blsp2_uart2_2pins_default: blsp2-uart2-2pins {
 				pins = "gpio4", "gpio5";
 				function = "blsp_uart8";
 				drive-strength = <16>;
 				bias-disable;
 			};

-			blsp2_uart2_2pins_sleep: blsp2-uart1-2pins-sleep {
+			blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep {
 				pins = "gpio4", "gpio5";
 				function = "gpio";
 				drive-strength = <2>;
@@ -1460,28 +1460,28 @@ blsp1_uart2_sleep: blsp1-uart2-sleep {
 				bias-disable;
 			};

-			blsp1_i2c3_default: blsp1-i2c2-default {
+			blsp1_i2c3_default: blsp1-i2c3-default {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c3";
 				drive-strength = <16>;
 				bias-disable;
 			};

-			blsp1_i2c3_sleep: blsp1-i2c2-sleep {
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep {
 				pins = "gpio47", "gpio48";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
 			};

-			blsp2_uart3_4pins_default: blsp2-uart2-4pins {
+			blsp2_uart3_4pins_default: blsp2-uart3-4pins {
 				pins = "gpio49", "gpio50", "gpio51", "gpio52";
 				function = "blsp_uart9";
 				drive-strength = <16>;
 				bias-disable;
 			};

-			blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep {
+			blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep {
 				pins = "gpio49", "gpio50", "gpio51", "gpio52";
 				function = "blsp_uart9";
 				drive-strength = <2>;
@@ -1517,7 +1517,7 @@ blsp2_i2c1_default: blsp2-i2c1 {
 				bias-disable;
 			};

-			blsp2_i2c1_sleep: blsp2-i2c0-sleep {
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep {
 				pins = "gpio55", "gpio56";
 				function = "gpio";
 				drive-strength = <2>;
@@ -1549,7 +1549,7 @@ cdc_reset_sleep: cdc-reset-sleep {
 				output-low;
 			};

-			blsp2_spi6_default: blsp2-spi5-default {
+			blsp2_spi6_default: blsp2-spi6-default {
 				spi {
 					pins = "gpio85", "gpio86", "gpio88";
 					function = "blsp_spi12";
@@ -1566,7 +1566,7 @@ cs {
 				};
 			};

-			blsp2_spi6_sleep: blsp2-spi5-sleep {
+			blsp2_spi6_sleep: blsp2-spi6-sleep {
 				pins = "gpio85", "gpio86", "gpio87", "gpio88";
 				function = "gpio";
 				drive-strength = <2>;
--
2.38.1



  reply	other threads:[~2022-10-21 14:24 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-21 14:23 [PATCH 0/4] Initial OnePlus 3(T) Support Harry Austen
2022-10-21 14:23 ` Harry Austen [this message]
2022-10-21 14:24 ` [PATCH 2/4] arm64: boot: dts: msm8996: add blsp1_i2c6 node Harry Austen
2022-10-21 14:36   ` Krzysztof Kozlowski
2022-10-21 14:24 ` [PATCH 3/4] dt-bindings: arm: qcom: add oneplus3(t) devices Harry Austen
2022-10-21 14:37   ` Krzysztof Kozlowski
2022-10-21 14:24 ` [PATCH 4/4] arm64: dts: qcom: msm8996: add support for oneplus3(t) Harry Austen
2022-10-21 14:44   ` Krzysztof Kozlowski
2022-10-22 10:38     ` Harry Austen
2022-10-22 15:34       ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221021142242.129276-2-hpausten@protonmail.com \
    --to=hpausten@protonmail.com \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@somainline.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=y.oudjana@protonmail.com \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.