* [PATCH v4 1/3] dt-bindings: clock: add loongson2 clock include file
@ 2022-10-26 3:02 Yinbo Zhu
2022-10-26 3:02 ` [PATCH v4 2/3] clk: clk-loongson2: add clock controller driver support Yinbo Zhu
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Yinbo Zhu @ 2022-10-26 3:02 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Huacai Chen, WANG Xuerui, Jiaxun Yang,
Jianmin Lv, Yang Li, linux-clk, devicetree, linux-kernel,
loongarch, Yinbo Zhu
Cc: Krzysztof Kozlowski
This file defines all loongson2 soc clock indexes, it should be
included in the device tree in which there's device using the
clocks.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
MAINTAINERS | 6 ++++
include/dt-bindings/clock/loongson,ls2k-clk.h | 29 +++++++++++++++++++
2 files changed, 35 insertions(+)
create mode 100644 include/dt-bindings/clock/loongson,ls2k-clk.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 0be0f520c032..b6aae412de9c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11907,6 +11907,12 @@ S: Maintained
F: Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
F: drivers/thermal/loongson2_thermal.c
+LOONGSON2 SOC SERIES CLOCK DRIVER
+M: Yinbo Zhu <zhuyinbo@loongson.cn>
+L: linux-clk@vger.kernel.org
+S: Maintained
+F: include/dt-bindings/clock/loongson,ls2k-clk.h
+
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
M: Sathya Prakash <sathya.prakash@broadcom.com>
M: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
diff --git a/include/dt-bindings/clock/loongson,ls2k-clk.h b/include/dt-bindings/clock/loongson,ls2k-clk.h
new file mode 100644
index 000000000000..db1e27e792ff
--- /dev/null
+++ b/include/dt-bindings/clock/loongson,ls2k-clk.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Author: Yinbo Zhu <zhuyinbo@loongson.cn>
+ * Copyright (C) 2022-2023 Loongson Technology Corporation Limited
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_LOONGSON2_H
+#define __DT_BINDINGS_CLOCK_LOONGSON2_H
+
+#define LOONGSON2_REF_100M 0
+#define LOONGSON2_NODE_PLL 1
+#define LOONGSON2_DDR_PLL 2
+#define LOONGSON2_DC_PLL 3
+#define LOONGSON2_PIX0_PLL 4
+#define LOONGSON2_PIX1_PLL 5
+#define LOONGSON2_NODE_CLK 6
+#define LOONGSON2_HDA_CLK 7
+#define LOONGSON2_GPU_CLK 8
+#define LOONGSON2_DDR_CLK 9
+#define LOONGSON2_GMAC_CLK 10
+#define LOONGSON2_DC_CLK 11
+#define LOONGSON2_APB_CLK 12
+#define LOONGSON2_USB_CLK 13
+#define LOONGSON2_SATA_CLK 14
+#define LOONGSON2_PIX0_CLK 15
+#define LOONGSON2_PIX1_CLK 16
+#define LOONGSON2_CLK_END 17
+
+#endif
--
2.31.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v4 2/3] clk: clk-loongson2: add clock controller driver support 2022-10-26 3:02 [PATCH v4 1/3] dt-bindings: clock: add loongson2 clock include file Yinbo Zhu @ 2022-10-26 3:02 ` Yinbo Zhu 2022-10-26 12:06 ` Huacai Chen 2022-10-26 3:02 ` [PATCH v4 3/3] dt-bindings: clock: add loongson2 clock Yinbo Zhu 2022-10-26 12:03 ` [PATCH v4 1/3] dt-bindings: clock: add loongson2 clock include file Huacai Chen 2 siblings, 1 reply; 6+ messages in thread From: Yinbo Zhu @ 2022-10-26 3:02 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Huacai Chen, WANG Xuerui, Jiaxun Yang, Jianmin Lv, Yang Li, linux-clk, devicetree, linux-kernel, loongarch, Yinbo Zhu This driver provides support for clock controller on Loongson2 SoC , the Loongson2 SoC uses a 100MHz clock as the PLL reference clock , there are five independent PLLs inside, each of which PLL can provide up to three sets of frequency dependent clock outputs. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> --- Change in v4: 1. Fixup clock-names that replace "xxx-clk" with "xxx". MAINTAINERS | 1 + arch/loongarch/Kconfig | 1 + arch/loongarch/kernel/time.c | 3 + drivers/clk/Kconfig | 9 ++ drivers/clk/Makefile | 1 + drivers/clk/clk-loongson2.c | 285 +++++++++++++++++++++++++++++++++++ 6 files changed, 300 insertions(+) create mode 100644 drivers/clk/clk-loongson2.c diff --git a/MAINTAINERS b/MAINTAINERS index b6aae412de9c..f01d60cd5c3b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11911,6 +11911,7 @@ LOONGSON2 SOC SERIES CLOCK DRIVER M: Yinbo Zhu <zhuyinbo@loongson.cn> L: linux-clk@vger.kernel.org S: Maintained +F: drivers/clk/clk-loongson2.c F: include/dt-bindings/clock/loongson,ls2k-clk.h LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index 26aeb1408e56..8b65f349cd6e 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -122,6 +122,7 @@ config LOONGARCH select USE_PERCPU_NUMA_NODE_ID select USER_STACKTRACE_SUPPORT select ZONE_DMA32 + select COMMON_CLK config 32BIT bool diff --git a/arch/loongarch/kernel/time.c b/arch/loongarch/kernel/time.c index 786735dcc8d6..09f20bc81798 100644 --- a/arch/loongarch/kernel/time.c +++ b/arch/loongarch/kernel/time.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/sched_clock.h> #include <linux/spinlock.h> +#include <linux/of_clk.h> #include <asm/cpu-features.h> #include <asm/loongarch.h> @@ -214,6 +215,8 @@ int __init constant_clocksource_init(void) void __init time_init(void) { + of_clk_init(NULL); + if (!cpu_has_cpucfg) const_clock_freq = cpu_clock_freq; else diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 48f8f4221e21..88620f86373f 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -428,6 +428,15 @@ config COMMON_CLK_K210 help Support for the Canaan Kendryte K210 RISC-V SoC clocks. +config COMMON_CLK_LOONGSON2 + bool "Clock driver for Loongson2 SoC" + depends on COMMON_CLK && OF + help + This driver provides support for Clock Controller that base on + Common Clock Framework Controller (CCF) on Loongson2 SoC. The + Clock Controller can generates and supplies clock to various + peripherals within the SoC. + source "drivers/clk/actions/Kconfig" source "drivers/clk/analogbits/Kconfig" source "drivers/clk/baikal-t1/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index d5db170d38d2..8ccc7436052f 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_COMMON_CLK_RS9_PCIE) += clk-renesas-pcie.o obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o +obj-$(CONFIG_COMMON_CLK_LOONGSON2) += clk-loongson2.o # please keep this section sorted lexicographically by directory path name obj-y += actions/ diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c new file mode 100644 index 000000000000..359fede40112 --- /dev/null +++ b/drivers/clk/clk-loongson2.c @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Author: Yinbo Zhu <zhuyinbo@loongson.cn> + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited + */ + +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <dt-bindings/clock/loongson,ls2k-clk.h> +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/clk.h> + +#define LOONGSON2_PLL_MULT_SHIFT 32 +#define LOONGSON2_PLL_MULT_WIDTH 10 +#define LOONGSON2_PLL_DIV_SHIFT 26 +#define LOONGSON2_PLL_DIV_WIDTH 6 +#define LOONGSON2_APB_FREQSCALE_SHIFT 20 +#define LOONGSON2_APB_FREQSCALE_WIDTH 3 +#define LOONGSON2_USB_FREQSCALE_SHIFT 16 +#define LOONGSON2_USB_FREQSCALE_WIDTH 3 +#define LOONGSON2_SATA_FREQSCALE_SHIFT 12 +#define LOONGSON2_SATA_FREQSCALE_WIDTH 3 + +void __iomem *loongson2_pll_base; +static DEFINE_SPINLOCK(loongson2_clk_lock); +static struct clk_hw **hws; +static struct clk_hw_onecell_data *clk_hw_data; + +static struct clk_hw *loongson2_clk_register(struct device *dev, + const char *name, + const char *parent_name, + const struct clk_ops *ops, + unsigned long flags) +{ + int ret; + struct clk_hw *hw; + struct clk_init_data init; + + /* allocate the divider */ + hw = kzalloc(sizeof(*hw), GFP_KERNEL); + if (!hw) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = ops; + init.flags = flags | CLK_IS_BASIC; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + hw->init = &init; + + /* register the clock */ + ret = clk_hw_register(dev, hw); + if (ret) { + kfree(hw); + hw = ERR_PTR(ret); + } + + return hw; +} + +static struct clk_hw *loongson2_clk_pll_register(const char *name, + const char *parent, void __iomem *reg) +{ + u64 val; + u32 mult = 1, div = 1; + + val = readq((void *)reg); + + mult = (val >> LOONGSON2_PLL_MULT_SHIFT) & + clk_div_mask(LOONGSON2_PLL_MULT_WIDTH); + div = (val >> LOONGSON2_PLL_DIV_SHIFT) & + clk_div_mask(LOONGSON2_PLL_DIV_WIDTH); + + return clk_hw_register_fixed_factor(NULL, name, parent, + CLK_SET_RATE_PARENT, mult, div); +} + +static unsigned long loongson2_apb_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u64 val; + u32 mult; + unsigned long rate; + + val = readq((void *)(loongson2_pll_base + 0x50)); + + mult = (val >> LOONGSON2_APB_FREQSCALE_SHIFT) & + clk_div_mask(LOONGSON2_APB_FREQSCALE_WIDTH); + + rate = parent_rate * (mult + 1); + do_div(rate, 8); + + return rate; +} + +static const struct clk_ops loongson2_apb_clk_ops = { + .recalc_rate = loongson2_apb_recalc_rate, +}; + +static unsigned long loongson2_usb_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u64 val; + u32 mult; + unsigned long rate; + + val = readq((void *)(loongson2_pll_base + 0x50)); + + mult = (val >> LOONGSON2_USB_FREQSCALE_SHIFT) & + clk_div_mask(LOONGSON2_USB_FREQSCALE_WIDTH); + + rate = parent_rate * (mult + 1); + do_div(rate, 8); + + return rate; +} + +static const struct clk_ops loongson2_usb_clk_ops = { + .recalc_rate = loongson2_usb_recalc_rate, +}; + +static unsigned long loongson2_sata_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u64 val; + u32 mult; + unsigned long rate; + + val = readq((void *)(loongson2_pll_base + 0x50)); + + mult = (val >> LOONGSON2_SATA_FREQSCALE_SHIFT) & + clk_div_mask(LOONGSON2_SATA_FREQSCALE_WIDTH); + + rate = parent_rate * (mult + 1); + do_div(rate, 8); + + return rate; +} + +static const struct clk_ops loongson2_sata_clk_ops = { + .recalc_rate = loongson2_sata_recalc_rate, +}; + +static void loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count) +{ + unsigned int i; + + for (i = 0; i < count; i++) + if (IS_ERR(clks[i])) + pr_err("Loongson2 clk %u: register failed with %ld\n" + , i, PTR_ERR(clks[i])); +} + +static struct clk_hw *loongson2_obtain_fixed_clk_hw( + struct device_node *np, + const char *name) +{ + struct clk *clk; + + clk = of_clk_get_by_name(np, name); + if (IS_ERR(clk)) + return ERR_PTR(-ENOENT); + + return __clk_get_hw(clk); +} + +static void __init loongson2_clocks_init(struct device_node *np) +{ + loongson2_pll_base = of_iomap(np, 0); + + if (!loongson2_pll_base) { + pr_err("clk: unable to map loongson2 clk registers\n"); + goto err; + } + + clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, LOONGSON2_CLK_END), + GFP_KERNEL); + if (WARN_ON(!clk_hw_data)) + goto err; + + clk_hw_data->num = LOONGSON2_CLK_END; + hws = clk_hw_data->hws; + + hws[LOONGSON2_REF_100M] = loongson2_obtain_fixed_clk_hw(np, + "ref_100m"); + + hws[LOONGSON2_NODE_PLL] = loongson2_clk_pll_register("node_pll", + "ref_100m", + loongson2_pll_base); + + hws[LOONGSON2_DDR_PLL] = loongson2_clk_pll_register("ddr_pll", + "ref_100m", + loongson2_pll_base + 0x10); + + hws[LOONGSON2_DC_PLL] = loongson2_clk_pll_register("dc_pll", + "ref_100m", + loongson2_pll_base + 0x20); + + hws[LOONGSON2_PIX0_PLL] = loongson2_clk_pll_register("pix0_pll", + "ref_100m", + loongson2_pll_base + 0x30); + + hws[LOONGSON2_PIX1_PLL] = loongson2_clk_pll_register("pix1_pll", + "ref_100m", + loongson2_pll_base + 0x40); + + hws[LOONGSON2_NODE_CLK] = clk_hw_register_divider(NULL, "node", + "node_pll", 0, + loongson2_pll_base + 0x8, 0, + 6, CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + /* + * The hda clk divisor in the upper 32bits and the clk-prodiver + * layer code doesn't support 64bit io operation thus a conversion + * is required that subtract shift by 32 and add 4byte to the hda + * address + */ + hws[LOONGSON2_HDA_CLK] = clk_hw_register_divider(NULL, "hda", + "ddr_pll", 0, + loongson2_pll_base + 0x22, 12, + 7, CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + hws[LOONGSON2_GPU_CLK] = clk_hw_register_divider(NULL, "gpu", + "ddr_pll", 0, + loongson2_pll_base + 0x18, 22, + 6, CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + hws[LOONGSON2_DDR_CLK] = clk_hw_register_divider(NULL, "ddr", + "ddr_pll", 0, + loongson2_pll_base + 0x18, 0, + 6, CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + hws[LOONGSON2_GMAC_CLK] = clk_hw_register_divider(NULL, "gmac", + "dc_pll", 0, + loongson2_pll_base + 0x28, 22, + 6, CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + hws[LOONGSON2_DC_CLK] = clk_hw_register_divider(NULL, "dc", + "dc_pll", 0, + loongson2_pll_base + 0x28, 0, + 6, CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + hws[LOONGSON2_APB_CLK] = loongson2_clk_register(NULL, "apb", + "gmac", + &loongson2_apb_clk_ops, 0); + + hws[LOONGSON2_USB_CLK] = loongson2_clk_register(NULL, "usb", + "gmac", + &loongson2_usb_clk_ops, 0); + + hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(NULL, "sata", + "gmac", + &loongson2_sata_clk_ops, 0); + + hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0", + "pix0_pll", 0, + loongson2_pll_base + 0x38, 0, 6, + CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1", + "pix1_pll", 0, + loongson2_pll_base + 0x48, 0, 6, + CLK_DIVIDER_ONE_BASED, + &loongson2_clk_lock); + + loongson2_check_clk_hws(hws, LOONGSON2_CLK_END); + + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data); + +err: + iounmap(loongson2_pll_base); +} + +CLK_OF_DECLARE(loongson2_clk, "loongson,ls2k-clk", loongson2_clocks_init); -- 2.31.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v4 2/3] clk: clk-loongson2: add clock controller driver support 2022-10-26 3:02 ` [PATCH v4 2/3] clk: clk-loongson2: add clock controller driver support Yinbo Zhu @ 2022-10-26 12:06 ` Huacai Chen 2022-10-27 1:11 ` Yinbo Zhu 0 siblings, 1 reply; 6+ messages in thread From: Huacai Chen @ 2022-10-26 12:06 UTC (permalink / raw) To: Yinbo Zhu Cc: Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, WANG Xuerui, Jiaxun Yang, Jianmin Lv, Yang Li, linux-clk, devicetree, linux-kernel, loongarch Hi, Yinbo, On Wed, Oct 26, 2022 at 11:03 AM Yinbo Zhu <zhuyinbo@loongson.cn> wrote: > > This driver provides support for clock controller on Loongson2 SoC > , the Loongson2 SoC uses a 100MHz clock as the PLL reference clock Use Loongson-2, including in commit message, Kconfig description and comments. > , there are five independent PLLs inside, each of which PLL can > provide up to three sets of frequency dependent clock outputs. > > Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> > --- > Change in v4: > 1. Fixup clock-names that replace "xxx-clk" with "xxx". > > MAINTAINERS | 1 + > arch/loongarch/Kconfig | 1 + > arch/loongarch/kernel/time.c | 3 + > drivers/clk/Kconfig | 9 ++ > drivers/clk/Makefile | 1 + > drivers/clk/clk-loongson2.c | 285 +++++++++++++++++++++++++++++++++++ > 6 files changed, 300 insertions(+) > create mode 100644 drivers/clk/clk-loongson2.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index b6aae412de9c..f01d60cd5c3b 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11911,6 +11911,7 @@ LOONGSON2 SOC SERIES CLOCK DRIVER > M: Yinbo Zhu <zhuyinbo@loongson.cn> > L: linux-clk@vger.kernel.org > S: Maintained > +F: drivers/clk/clk-loongson2.c > F: include/dt-bindings/clock/loongson,ls2k-clk.h > > LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) > diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig > index 26aeb1408e56..8b65f349cd6e 100644 > --- a/arch/loongarch/Kconfig > +++ b/arch/loongarch/Kconfig > @@ -122,6 +122,7 @@ config LOONGARCH > select USE_PERCPU_NUMA_NODE_ID > select USER_STACKTRACE_SUPPORT > select ZONE_DMA32 > + select COMMON_CLK > > config 32BIT > bool > diff --git a/arch/loongarch/kernel/time.c b/arch/loongarch/kernel/time.c > index 786735dcc8d6..09f20bc81798 100644 > --- a/arch/loongarch/kernel/time.c > +++ b/arch/loongarch/kernel/time.c > @@ -12,6 +12,7 @@ > #include <linux/kernel.h> > #include <linux/sched_clock.h> > #include <linux/spinlock.h> > +#include <linux/of_clk.h> > > #include <asm/cpu-features.h> > #include <asm/loongarch.h> > @@ -214,6 +215,8 @@ int __init constant_clocksource_init(void) > > void __init time_init(void) > { > + of_clk_init(NULL); > + > if (!cpu_has_cpucfg) > const_clock_freq = cpu_clock_freq; > else > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig > index 48f8f4221e21..88620f86373f 100644 > --- a/drivers/clk/Kconfig > +++ b/drivers/clk/Kconfig > @@ -428,6 +428,15 @@ config COMMON_CLK_K210 > help > Support for the Canaan Kendryte K210 RISC-V SoC clocks. > > +config COMMON_CLK_LOONGSON2 > + bool "Clock driver for Loongson2 SoC" > + depends on COMMON_CLK && OF > + help > + This driver provides support for Clock Controller that base on > + Common Clock Framework Controller (CCF) on Loongson2 SoC. The > + Clock Controller can generates and supplies clock to various > + peripherals within the SoC. > + > source "drivers/clk/actions/Kconfig" > source "drivers/clk/analogbits/Kconfig" > source "drivers/clk/baikal-t1/Kconfig" > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile > index d5db170d38d2..8ccc7436052f 100644 > --- a/drivers/clk/Makefile > +++ b/drivers/clk/Makefile > @@ -75,6 +75,7 @@ obj-$(CONFIG_COMMON_CLK_RS9_PCIE) += clk-renesas-pcie.o > obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o > obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o > obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o > +obj-$(CONFIG_COMMON_CLK_LOONGSON2) += clk-loongson2.o > > # please keep this section sorted lexicographically by directory path name > obj-y += actions/ > diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c > new file mode 100644 > index 000000000000..359fede40112 > --- /dev/null > +++ b/drivers/clk/clk-loongson2.c > @@ -0,0 +1,285 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Author: Yinbo Zhu <zhuyinbo@loongson.cn> > + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited Why 2023? Huacai > + */ > + > +#include <linux/clkdev.h> > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <dt-bindings/clock/loongson,ls2k-clk.h> > +#include <linux/clk-provider.h> > +#include <linux/slab.h> > +#include <linux/clk.h> > + > +#define LOONGSON2_PLL_MULT_SHIFT 32 > +#define LOONGSON2_PLL_MULT_WIDTH 10 > +#define LOONGSON2_PLL_DIV_SHIFT 26 > +#define LOONGSON2_PLL_DIV_WIDTH 6 > +#define LOONGSON2_APB_FREQSCALE_SHIFT 20 > +#define LOONGSON2_APB_FREQSCALE_WIDTH 3 > +#define LOONGSON2_USB_FREQSCALE_SHIFT 16 > +#define LOONGSON2_USB_FREQSCALE_WIDTH 3 > +#define LOONGSON2_SATA_FREQSCALE_SHIFT 12 > +#define LOONGSON2_SATA_FREQSCALE_WIDTH 3 > + > +void __iomem *loongson2_pll_base; > +static DEFINE_SPINLOCK(loongson2_clk_lock); > +static struct clk_hw **hws; > +static struct clk_hw_onecell_data *clk_hw_data; > + > +static struct clk_hw *loongson2_clk_register(struct device *dev, > + const char *name, > + const char *parent_name, > + const struct clk_ops *ops, > + unsigned long flags) > +{ > + int ret; > + struct clk_hw *hw; > + struct clk_init_data init; > + > + /* allocate the divider */ > + hw = kzalloc(sizeof(*hw), GFP_KERNEL); > + if (!hw) > + return ERR_PTR(-ENOMEM); > + > + init.name = name; > + init.ops = ops; > + init.flags = flags | CLK_IS_BASIC; > + init.parent_names = (parent_name ? &parent_name : NULL); > + init.num_parents = (parent_name ? 1 : 0); > + hw->init = &init; > + > + /* register the clock */ > + ret = clk_hw_register(dev, hw); > + if (ret) { > + kfree(hw); > + hw = ERR_PTR(ret); > + } > + > + return hw; > +} > + > +static struct clk_hw *loongson2_clk_pll_register(const char *name, > + const char *parent, void __iomem *reg) > +{ > + u64 val; > + u32 mult = 1, div = 1; > + > + val = readq((void *)reg); > + > + mult = (val >> LOONGSON2_PLL_MULT_SHIFT) & > + clk_div_mask(LOONGSON2_PLL_MULT_WIDTH); > + div = (val >> LOONGSON2_PLL_DIV_SHIFT) & > + clk_div_mask(LOONGSON2_PLL_DIV_WIDTH); > + > + return clk_hw_register_fixed_factor(NULL, name, parent, > + CLK_SET_RATE_PARENT, mult, div); > +} > + > +static unsigned long loongson2_apb_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + u64 val; > + u32 mult; > + unsigned long rate; > + > + val = readq((void *)(loongson2_pll_base + 0x50)); > + > + mult = (val >> LOONGSON2_APB_FREQSCALE_SHIFT) & > + clk_div_mask(LOONGSON2_APB_FREQSCALE_WIDTH); > + > + rate = parent_rate * (mult + 1); > + do_div(rate, 8); > + > + return rate; > +} > + > +static const struct clk_ops loongson2_apb_clk_ops = { > + .recalc_rate = loongson2_apb_recalc_rate, > +}; > + > +static unsigned long loongson2_usb_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + u64 val; > + u32 mult; > + unsigned long rate; > + > + val = readq((void *)(loongson2_pll_base + 0x50)); > + > + mult = (val >> LOONGSON2_USB_FREQSCALE_SHIFT) & > + clk_div_mask(LOONGSON2_USB_FREQSCALE_WIDTH); > + > + rate = parent_rate * (mult + 1); > + do_div(rate, 8); > + > + return rate; > +} > + > +static const struct clk_ops loongson2_usb_clk_ops = { > + .recalc_rate = loongson2_usb_recalc_rate, > +}; > + > +static unsigned long loongson2_sata_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + u64 val; > + u32 mult; > + unsigned long rate; > + > + val = readq((void *)(loongson2_pll_base + 0x50)); > + > + mult = (val >> LOONGSON2_SATA_FREQSCALE_SHIFT) & > + clk_div_mask(LOONGSON2_SATA_FREQSCALE_WIDTH); > + > + rate = parent_rate * (mult + 1); > + do_div(rate, 8); > + > + return rate; > +} > + > +static const struct clk_ops loongson2_sata_clk_ops = { > + .recalc_rate = loongson2_sata_recalc_rate, > +}; > + > +static void loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count) > +{ > + unsigned int i; > + > + for (i = 0; i < count; i++) > + if (IS_ERR(clks[i])) > + pr_err("Loongson2 clk %u: register failed with %ld\n" > + , i, PTR_ERR(clks[i])); > +} > + > +static struct clk_hw *loongson2_obtain_fixed_clk_hw( > + struct device_node *np, > + const char *name) > +{ > + struct clk *clk; > + > + clk = of_clk_get_by_name(np, name); > + if (IS_ERR(clk)) > + return ERR_PTR(-ENOENT); > + > + return __clk_get_hw(clk); > +} > + > +static void __init loongson2_clocks_init(struct device_node *np) > +{ > + loongson2_pll_base = of_iomap(np, 0); > + > + if (!loongson2_pll_base) { > + pr_err("clk: unable to map loongson2 clk registers\n"); > + goto err; > + } > + > + clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, LOONGSON2_CLK_END), > + GFP_KERNEL); > + if (WARN_ON(!clk_hw_data)) > + goto err; > + > + clk_hw_data->num = LOONGSON2_CLK_END; > + hws = clk_hw_data->hws; > + > + hws[LOONGSON2_REF_100M] = loongson2_obtain_fixed_clk_hw(np, > + "ref_100m"); > + > + hws[LOONGSON2_NODE_PLL] = loongson2_clk_pll_register("node_pll", > + "ref_100m", > + loongson2_pll_base); > + > + hws[LOONGSON2_DDR_PLL] = loongson2_clk_pll_register("ddr_pll", > + "ref_100m", > + loongson2_pll_base + 0x10); > + > + hws[LOONGSON2_DC_PLL] = loongson2_clk_pll_register("dc_pll", > + "ref_100m", > + loongson2_pll_base + 0x20); > + > + hws[LOONGSON2_PIX0_PLL] = loongson2_clk_pll_register("pix0_pll", > + "ref_100m", > + loongson2_pll_base + 0x30); > + > + hws[LOONGSON2_PIX1_PLL] = loongson2_clk_pll_register("pix1_pll", > + "ref_100m", > + loongson2_pll_base + 0x40); > + > + hws[LOONGSON2_NODE_CLK] = clk_hw_register_divider(NULL, "node", > + "node_pll", 0, > + loongson2_pll_base + 0x8, 0, > + 6, CLK_DIVIDER_ONE_BASED, > + &loongson2_clk_lock); > + > + /* > + * The hda clk divisor in the upper 32bits and the clk-prodiver > + * layer code doesn't support 64bit io operation thus a conversion > + * is required that subtract shift by 32 and add 4byte to the hda > + * address > + */ > + hws[LOONGSON2_HDA_CLK] = clk_hw_register_divider(NULL, "hda", > + "ddr_pll", 0, > + loongson2_pll_base + 0x22, 12, > + 7, CLK_DIVIDER_ONE_BASED, > + &loongson2_clk_lock); > + > + hws[LOONGSON2_GPU_CLK] = clk_hw_register_divider(NULL, "gpu", > + "ddr_pll", 0, > + loongson2_pll_base + 0x18, 22, > + 6, CLK_DIVIDER_ONE_BASED, > + &loongson2_clk_lock); > + > + hws[LOONGSON2_DDR_CLK] = clk_hw_register_divider(NULL, "ddr", > + "ddr_pll", 0, > + loongson2_pll_base + 0x18, 0, > + 6, CLK_DIVIDER_ONE_BASED, > + &loongson2_clk_lock); > + > + hws[LOONGSON2_GMAC_CLK] = clk_hw_register_divider(NULL, "gmac", > + "dc_pll", 0, > + loongson2_pll_base + 0x28, 22, > + 6, CLK_DIVIDER_ONE_BASED, > + &loongson2_clk_lock); > + > + hws[LOONGSON2_DC_CLK] = clk_hw_register_divider(NULL, "dc", > + "dc_pll", 0, > + loongson2_pll_base + 0x28, 0, > + 6, CLK_DIVIDER_ONE_BASED, > + &loongson2_clk_lock); > + > + hws[LOONGSON2_APB_CLK] = loongson2_clk_register(NULL, "apb", > + "gmac", > + &loongson2_apb_clk_ops, 0); > + > + hws[LOONGSON2_USB_CLK] = loongson2_clk_register(NULL, "usb", > + "gmac", > + &loongson2_usb_clk_ops, 0); > + > + hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(NULL, "sata", > + "gmac", > + &loongson2_sata_clk_ops, 0); > + > + hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0", > + "pix0_pll", 0, > + loongson2_pll_base + 0x38, 0, 6, > + CLK_DIVIDER_ONE_BASED, > + &loongson2_clk_lock); > + > + hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1", > + "pix1_pll", 0, > + loongson2_pll_base + 0x48, 0, 6, > + CLK_DIVIDER_ONE_BASED, > + &loongson2_clk_lock); > + > + loongson2_check_clk_hws(hws, LOONGSON2_CLK_END); > + > + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data); > + > +err: > + iounmap(loongson2_pll_base); > +} > + > +CLK_OF_DECLARE(loongson2_clk, "loongson,ls2k-clk", loongson2_clocks_init); > -- > 2.31.1 > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v4 2/3] clk: clk-loongson2: add clock controller driver support 2022-10-26 12:06 ` Huacai Chen @ 2022-10-27 1:11 ` Yinbo Zhu 0 siblings, 0 replies; 6+ messages in thread From: Yinbo Zhu @ 2022-10-27 1:11 UTC (permalink / raw) To: Huacai Chen Cc: Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, WANG Xuerui, Jiaxun Yang, Jianmin Lv, Yang Li, linux-clk, devicetree, linux-kernel, loongarch, zhuyinbo 在 2022/10/26 下午8:06, Huacai Chen 写道: > Hi, Yinbo, > > On Wed, Oct 26, 2022 at 11:03 AM Yinbo Zhu <zhuyinbo@loongson.cn> wrote: >> >> This driver provides support for clock controller on Loongson2 SoC >> , the Loongson2 SoC uses a 100MHz clock as the PLL reference clock > Use Loongson-2, including in commit message, Kconfig description and comments. okay, I will do it. > >> , there are five independent PLLs inside, each of which PLL can >> provide up to three sets of frequency dependent clock outputs. >> >> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> >> --- >> Change in v4: >> 1. Fixup clock-names that replace "xxx-clk" with "xxx". >> >> MAINTAINERS | 1 + >> arch/loongarch/Kconfig | 1 + >> arch/loongarch/kernel/time.c | 3 + >> drivers/clk/Kconfig | 9 ++ >> drivers/clk/Makefile | 1 + >> drivers/clk/clk-loongson2.c | 285 +++++++++++++++++++++++++++++++++++ >> 6 files changed, 300 insertions(+) >> create mode 100644 drivers/clk/clk-loongson2.c >> >> diff --git a/MAINTAINERS b/MAINTAINERS >> index b6aae412de9c..f01d60cd5c3b 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -11911,6 +11911,7 @@ LOONGSON2 SOC SERIES CLOCK DRIVER >> M: Yinbo Zhu <zhuyinbo@loongson.cn> >> L: linux-clk@vger.kernel.org >> S: Maintained >> +F: drivers/clk/clk-loongson2.c >> F: include/dt-bindings/clock/loongson,ls2k-clk.h >> >> LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) >> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig >> index 26aeb1408e56..8b65f349cd6e 100644 >> --- a/arch/loongarch/Kconfig >> +++ b/arch/loongarch/Kconfig >> @@ -122,6 +122,7 @@ config LOONGARCH >> select USE_PERCPU_NUMA_NODE_ID >> select USER_STACKTRACE_SUPPORT >> select ZONE_DMA32 >> + select COMMON_CLK >> >> config 32BIT >> bool >> diff --git a/arch/loongarch/kernel/time.c b/arch/loongarch/kernel/time.c >> index 786735dcc8d6..09f20bc81798 100644 >> --- a/arch/loongarch/kernel/time.c >> +++ b/arch/loongarch/kernel/time.c >> @@ -12,6 +12,7 @@ >> #include <linux/kernel.h> >> #include <linux/sched_clock.h> >> #include <linux/spinlock.h> >> +#include <linux/of_clk.h> >> >> #include <asm/cpu-features.h> >> #include <asm/loongarch.h> >> @@ -214,6 +215,8 @@ int __init constant_clocksource_init(void) >> >> void __init time_init(void) >> { >> + of_clk_init(NULL); >> + >> if (!cpu_has_cpucfg) >> const_clock_freq = cpu_clock_freq; >> else >> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig >> index 48f8f4221e21..88620f86373f 100644 >> --- a/drivers/clk/Kconfig >> +++ b/drivers/clk/Kconfig >> @@ -428,6 +428,15 @@ config COMMON_CLK_K210 >> help >> Support for the Canaan Kendryte K210 RISC-V SoC clocks. >> >> +config COMMON_CLK_LOONGSON2 >> + bool "Clock driver for Loongson2 SoC" >> + depends on COMMON_CLK && OF >> + help >> + This driver provides support for Clock Controller that base on >> + Common Clock Framework Controller (CCF) on Loongson2 SoC. The >> + Clock Controller can generates and supplies clock to various >> + peripherals within the SoC. >> + >> source "drivers/clk/actions/Kconfig" >> source "drivers/clk/analogbits/Kconfig" >> source "drivers/clk/baikal-t1/Kconfig" >> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile >> index d5db170d38d2..8ccc7436052f 100644 >> --- a/drivers/clk/Makefile >> +++ b/drivers/clk/Makefile >> @@ -75,6 +75,7 @@ obj-$(CONFIG_COMMON_CLK_RS9_PCIE) += clk-renesas-pcie.o >> obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o >> obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o >> obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o >> +obj-$(CONFIG_COMMON_CLK_LOONGSON2) += clk-loongson2.o >> >> # please keep this section sorted lexicographically by directory path name >> obj-y += actions/ >> diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c >> new file mode 100644 >> index 000000000000..359fede40112 >> --- /dev/null >> +++ b/drivers/clk/clk-loongson2.c >> @@ -0,0 +1,285 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Author: Yinbo Zhu <zhuyinbo@loongson.cn> >> + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited > Why 2023? This is the plan time from sending a patch to being accepted by the community. > > Huacai >> + */ >> + >> +#include <linux/clkdev.h> >> +#include <linux/err.h> >> +#include <linux/init.h> >> +#include <linux/of.h> >> +#include <linux/of_address.h> >> +#include <dt-bindings/clock/loongson,ls2k-clk.h> >> +#include <linux/clk-provider.h> >> +#include <linux/slab.h> >> +#include <linux/clk.h> >> + >> +#define LOONGSON2_PLL_MULT_SHIFT 32 >> +#define LOONGSON2_PLL_MULT_WIDTH 10 >> +#define LOONGSON2_PLL_DIV_SHIFT 26 >> +#define LOONGSON2_PLL_DIV_WIDTH 6 >> +#define LOONGSON2_APB_FREQSCALE_SHIFT 20 >> +#define LOONGSON2_APB_FREQSCALE_WIDTH 3 >> +#define LOONGSON2_USB_FREQSCALE_SHIFT 16 >> +#define LOONGSON2_USB_FREQSCALE_WIDTH 3 >> +#define LOONGSON2_SATA_FREQSCALE_SHIFT 12 >> +#define LOONGSON2_SATA_FREQSCALE_WIDTH 3 >> + >> +void __iomem *loongson2_pll_base; >> +static DEFINE_SPINLOCK(loongson2_clk_lock); >> +static struct clk_hw **hws; >> +static struct clk_hw_onecell_data *clk_hw_data; >> + >> +static struct clk_hw *loongson2_clk_register(struct device *dev, >> + const char *name, >> + const char *parent_name, >> + const struct clk_ops *ops, >> + unsigned long flags) >> +{ >> + int ret; >> + struct clk_hw *hw; >> + struct clk_init_data init; >> + >> + /* allocate the divider */ >> + hw = kzalloc(sizeof(*hw), GFP_KERNEL); >> + if (!hw) >> + return ERR_PTR(-ENOMEM); >> + >> + init.name = name; >> + init.ops = ops; >> + init.flags = flags | CLK_IS_BASIC; >> + init.parent_names = (parent_name ? &parent_name : NULL); >> + init.num_parents = (parent_name ? 1 : 0); >> + hw->init = &init; >> + >> + /* register the clock */ >> + ret = clk_hw_register(dev, hw); >> + if (ret) { >> + kfree(hw); >> + hw = ERR_PTR(ret); >> + } >> + >> + return hw; >> +} >> + >> +static struct clk_hw *loongson2_clk_pll_register(const char *name, >> + const char *parent, void __iomem *reg) >> +{ >> + u64 val; >> + u32 mult = 1, div = 1; >> + >> + val = readq((void *)reg); >> + >> + mult = (val >> LOONGSON2_PLL_MULT_SHIFT) & >> + clk_div_mask(LOONGSON2_PLL_MULT_WIDTH); >> + div = (val >> LOONGSON2_PLL_DIV_SHIFT) & >> + clk_div_mask(LOONGSON2_PLL_DIV_WIDTH); >> + >> + return clk_hw_register_fixed_factor(NULL, name, parent, >> + CLK_SET_RATE_PARENT, mult, div); >> +} >> + >> +static unsigned long loongson2_apb_recalc_rate(struct clk_hw *hw, >> + unsigned long parent_rate) >> +{ >> + u64 val; >> + u32 mult; >> + unsigned long rate; >> + >> + val = readq((void *)(loongson2_pll_base + 0x50)); >> + >> + mult = (val >> LOONGSON2_APB_FREQSCALE_SHIFT) & >> + clk_div_mask(LOONGSON2_APB_FREQSCALE_WIDTH); >> + >> + rate = parent_rate * (mult + 1); >> + do_div(rate, 8); >> + >> + return rate; >> +} >> + >> +static const struct clk_ops loongson2_apb_clk_ops = { >> + .recalc_rate = loongson2_apb_recalc_rate, >> +}; >> + >> +static unsigned long loongson2_usb_recalc_rate(struct clk_hw *hw, >> + unsigned long parent_rate) >> +{ >> + u64 val; >> + u32 mult; >> + unsigned long rate; >> + >> + val = readq((void *)(loongson2_pll_base + 0x50)); >> + >> + mult = (val >> LOONGSON2_USB_FREQSCALE_SHIFT) & >> + clk_div_mask(LOONGSON2_USB_FREQSCALE_WIDTH); >> + >> + rate = parent_rate * (mult + 1); >> + do_div(rate, 8); >> + >> + return rate; >> +} >> + >> +static const struct clk_ops loongson2_usb_clk_ops = { >> + .recalc_rate = loongson2_usb_recalc_rate, >> +}; >> + >> +static unsigned long loongson2_sata_recalc_rate(struct clk_hw *hw, >> + unsigned long parent_rate) >> +{ >> + u64 val; >> + u32 mult; >> + unsigned long rate; >> + >> + val = readq((void *)(loongson2_pll_base + 0x50)); >> + >> + mult = (val >> LOONGSON2_SATA_FREQSCALE_SHIFT) & >> + clk_div_mask(LOONGSON2_SATA_FREQSCALE_WIDTH); >> + >> + rate = parent_rate * (mult + 1); >> + do_div(rate, 8); >> + >> + return rate; >> +} >> + >> +static const struct clk_ops loongson2_sata_clk_ops = { >> + .recalc_rate = loongson2_sata_recalc_rate, >> +}; >> + >> +static void loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count) >> +{ >> + unsigned int i; >> + >> + for (i = 0; i < count; i++) >> + if (IS_ERR(clks[i])) >> + pr_err("Loongson2 clk %u: register failed with %ld\n" >> + , i, PTR_ERR(clks[i])); >> +} >> + >> +static struct clk_hw *loongson2_obtain_fixed_clk_hw( >> + struct device_node *np, >> + const char *name) >> +{ >> + struct clk *clk; >> + >> + clk = of_clk_get_by_name(np, name); >> + if (IS_ERR(clk)) >> + return ERR_PTR(-ENOENT); >> + >> + return __clk_get_hw(clk); >> +} >> + >> +static void __init loongson2_clocks_init(struct device_node *np) >> +{ >> + loongson2_pll_base = of_iomap(np, 0); >> + >> + if (!loongson2_pll_base) { >> + pr_err("clk: unable to map loongson2 clk registers\n"); >> + goto err; >> + } >> + >> + clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, LOONGSON2_CLK_END), >> + GFP_KERNEL); >> + if (WARN_ON(!clk_hw_data)) >> + goto err; >> + >> + clk_hw_data->num = LOONGSON2_CLK_END; >> + hws = clk_hw_data->hws; >> + >> + hws[LOONGSON2_REF_100M] = loongson2_obtain_fixed_clk_hw(np, >> + "ref_100m"); >> + >> + hws[LOONGSON2_NODE_PLL] = loongson2_clk_pll_register("node_pll", >> + "ref_100m", >> + loongson2_pll_base); >> + >> + hws[LOONGSON2_DDR_PLL] = loongson2_clk_pll_register("ddr_pll", >> + "ref_100m", >> + loongson2_pll_base + 0x10); >> + >> + hws[LOONGSON2_DC_PLL] = loongson2_clk_pll_register("dc_pll", >> + "ref_100m", >> + loongson2_pll_base + 0x20); >> + >> + hws[LOONGSON2_PIX0_PLL] = loongson2_clk_pll_register("pix0_pll", >> + "ref_100m", >> + loongson2_pll_base + 0x30); >> + >> + hws[LOONGSON2_PIX1_PLL] = loongson2_clk_pll_register("pix1_pll", >> + "ref_100m", >> + loongson2_pll_base + 0x40); >> + >> + hws[LOONGSON2_NODE_CLK] = clk_hw_register_divider(NULL, "node", >> + "node_pll", 0, >> + loongson2_pll_base + 0x8, 0, >> + 6, CLK_DIVIDER_ONE_BASED, >> + &loongson2_clk_lock); >> + >> + /* >> + * The hda clk divisor in the upper 32bits and the clk-prodiver >> + * layer code doesn't support 64bit io operation thus a conversion >> + * is required that subtract shift by 32 and add 4byte to the hda >> + * address >> + */ >> + hws[LOONGSON2_HDA_CLK] = clk_hw_register_divider(NULL, "hda", >> + "ddr_pll", 0, >> + loongson2_pll_base + 0x22, 12, >> + 7, CLK_DIVIDER_ONE_BASED, >> + &loongson2_clk_lock); >> + >> + hws[LOONGSON2_GPU_CLK] = clk_hw_register_divider(NULL, "gpu", >> + "ddr_pll", 0, >> + loongson2_pll_base + 0x18, 22, >> + 6, CLK_DIVIDER_ONE_BASED, >> + &loongson2_clk_lock); >> + >> + hws[LOONGSON2_DDR_CLK] = clk_hw_register_divider(NULL, "ddr", >> + "ddr_pll", 0, >> + loongson2_pll_base + 0x18, 0, >> + 6, CLK_DIVIDER_ONE_BASED, >> + &loongson2_clk_lock); >> + >> + hws[LOONGSON2_GMAC_CLK] = clk_hw_register_divider(NULL, "gmac", >> + "dc_pll", 0, >> + loongson2_pll_base + 0x28, 22, >> + 6, CLK_DIVIDER_ONE_BASED, >> + &loongson2_clk_lock); >> + >> + hws[LOONGSON2_DC_CLK] = clk_hw_register_divider(NULL, "dc", >> + "dc_pll", 0, >> + loongson2_pll_base + 0x28, 0, >> + 6, CLK_DIVIDER_ONE_BASED, >> + &loongson2_clk_lock); >> + >> + hws[LOONGSON2_APB_CLK] = loongson2_clk_register(NULL, "apb", >> + "gmac", >> + &loongson2_apb_clk_ops, 0); >> + >> + hws[LOONGSON2_USB_CLK] = loongson2_clk_register(NULL, "usb", >> + "gmac", >> + &loongson2_usb_clk_ops, 0); >> + >> + hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(NULL, "sata", >> + "gmac", >> + &loongson2_sata_clk_ops, 0); >> + >> + hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0", >> + "pix0_pll", 0, >> + loongson2_pll_base + 0x38, 0, 6, >> + CLK_DIVIDER_ONE_BASED, >> + &loongson2_clk_lock); >> + >> + hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1", >> + "pix1_pll", 0, >> + loongson2_pll_base + 0x48, 0, 6, >> + CLK_DIVIDER_ONE_BASED, >> + &loongson2_clk_lock); >> + >> + loongson2_check_clk_hws(hws, LOONGSON2_CLK_END); >> + >> + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data); >> + >> +err: >> + iounmap(loongson2_pll_base); >> +} >> + >> +CLK_OF_DECLARE(loongson2_clk, "loongson,ls2k-clk", loongson2_clocks_init); >> -- >> 2.31.1 >> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v4 3/3] dt-bindings: clock: add loongson2 clock 2022-10-26 3:02 [PATCH v4 1/3] dt-bindings: clock: add loongson2 clock include file Yinbo Zhu 2022-10-26 3:02 ` [PATCH v4 2/3] clk: clk-loongson2: add clock controller driver support Yinbo Zhu @ 2022-10-26 3:02 ` Yinbo Zhu 2022-10-26 12:03 ` [PATCH v4 1/3] dt-bindings: clock: add loongson2 clock include file Huacai Chen 2 siblings, 0 replies; 6+ messages in thread From: Yinbo Zhu @ 2022-10-26 3:02 UTC (permalink / raw) To: Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Huacai Chen, WANG Xuerui, Jiaxun Yang, Jianmin Lv, Yang Li, linux-clk, devicetree, linux-kernel, loongarch, Yinbo Zhu Cc: Krzysztof Kozlowski Add the loongson2 clock binding with DT schema format using json-schema. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../bindings/clock/loongson,ls2k-clk.yaml | 63 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 64 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml diff --git a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml new file mode 100644 index 000000000000..6cc6e0755735 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/loongson,ls2k-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson2 SoC Clock Control Module + +maintainers: + - Yinbo Zhu <zhuyinbo@loongson.cn> + +description: | + Loongson2 SoC clock control module is an integrated clock controller, which + generates and supplies to all modules. + +properties: + compatible: + enum: + - loongson,ls2k-clk + + reg: + maxItems: 1 + + clocks: + items: + - description: 100m ref + + clock-names: + items: + - const: ref_100m + + '#clock-cells': + const: 1 + description: + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/loongson,ls2k-clk.h + for the full list of loongson2 SoC clock IDs. + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + ref_100m: clock-ref-100m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "ref_100m"; + }; + + clk: clock-controller@1fe00480 { + compatible = "loongson,ls2k-clk"; + reg = <0x1fe00480 0x58>; + #clock-cells = <1>; + clocks = <&ref_100m>; + clock-names = "ref_100m"; + }; diff --git a/MAINTAINERS b/MAINTAINERS index f01d60cd5c3b..f61a431ad8ca 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11911,6 +11911,7 @@ LOONGSON2 SOC SERIES CLOCK DRIVER M: Yinbo Zhu <zhuyinbo@loongson.cn> L: linux-clk@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml F: drivers/clk/clk-loongson2.c F: include/dt-bindings/clock/loongson,ls2k-clk.h -- 2.31.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v4 1/3] dt-bindings: clock: add loongson2 clock include file 2022-10-26 3:02 [PATCH v4 1/3] dt-bindings: clock: add loongson2 clock include file Yinbo Zhu 2022-10-26 3:02 ` [PATCH v4 2/3] clk: clk-loongson2: add clock controller driver support Yinbo Zhu 2022-10-26 3:02 ` [PATCH v4 3/3] dt-bindings: clock: add loongson2 clock Yinbo Zhu @ 2022-10-26 12:03 ` Huacai Chen 2 siblings, 0 replies; 6+ messages in thread From: Huacai Chen @ 2022-10-26 12:03 UTC (permalink / raw) To: Yinbo Zhu Cc: Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, WANG Xuerui, Jiaxun Yang, Jianmin Lv, Yang Li, linux-clk, devicetree, linux-kernel, loongarch, Krzysztof Kozlowski Hi, Yinbo, On Wed, Oct 26, 2022 at 11:03 AM Yinbo Zhu <zhuyinbo@loongson.cn> wrote: > > This file defines all loongson2 soc clock indexes, it should be I suggest to use regular names, i.e., don't use loongson2, Loongson2 or LOONGSON2, use Loongson-2 instead. (except in C code). And soc may be SoC? Huacai > included in the device tree in which there's device using the > clocks. > > Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > MAINTAINERS | 6 ++++ > include/dt-bindings/clock/loongson,ls2k-clk.h | 29 +++++++++++++++++++ > 2 files changed, 35 insertions(+) > create mode 100644 include/dt-bindings/clock/loongson,ls2k-clk.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 0be0f520c032..b6aae412de9c 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11907,6 +11907,12 @@ S: Maintained > F: Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml > F: drivers/thermal/loongson2_thermal.c > > +LOONGSON2 SOC SERIES CLOCK DRIVER > +M: Yinbo Zhu <zhuyinbo@loongson.cn> > +L: linux-clk@vger.kernel.org > +S: Maintained > +F: include/dt-bindings/clock/loongson,ls2k-clk.h > + > LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) > M: Sathya Prakash <sathya.prakash@broadcom.com> > M: Sreekanth Reddy <sreekanth.reddy@broadcom.com> > diff --git a/include/dt-bindings/clock/loongson,ls2k-clk.h b/include/dt-bindings/clock/loongson,ls2k-clk.h > new file mode 100644 > index 000000000000..db1e27e792ff > --- /dev/null > +++ b/include/dt-bindings/clock/loongson,ls2k-clk.h > @@ -0,0 +1,29 @@ > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ > +/* > + * Author: Yinbo Zhu <zhuyinbo@loongson.cn> > + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited > + */ > + > +#ifndef __DT_BINDINGS_CLOCK_LOONGSON2_H > +#define __DT_BINDINGS_CLOCK_LOONGSON2_H > + > +#define LOONGSON2_REF_100M 0 > +#define LOONGSON2_NODE_PLL 1 > +#define LOONGSON2_DDR_PLL 2 > +#define LOONGSON2_DC_PLL 3 > +#define LOONGSON2_PIX0_PLL 4 > +#define LOONGSON2_PIX1_PLL 5 > +#define LOONGSON2_NODE_CLK 6 > +#define LOONGSON2_HDA_CLK 7 > +#define LOONGSON2_GPU_CLK 8 > +#define LOONGSON2_DDR_CLK 9 > +#define LOONGSON2_GMAC_CLK 10 > +#define LOONGSON2_DC_CLK 11 > +#define LOONGSON2_APB_CLK 12 > +#define LOONGSON2_USB_CLK 13 > +#define LOONGSON2_SATA_CLK 14 > +#define LOONGSON2_PIX0_CLK 15 > +#define LOONGSON2_PIX1_CLK 16 > +#define LOONGSON2_CLK_END 17 > + > +#endif > -- > 2.31.1 > > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-10-27 1:15 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-10-26 3:02 [PATCH v4 1/3] dt-bindings: clock: add loongson2 clock include file Yinbo Zhu 2022-10-26 3:02 ` [PATCH v4 2/3] clk: clk-loongson2: add clock controller driver support Yinbo Zhu 2022-10-26 12:06 ` Huacai Chen 2022-10-27 1:11 ` Yinbo Zhu 2022-10-26 3:02 ` [PATCH v4 3/3] dt-bindings: clock: add loongson2 clock Yinbo Zhu 2022-10-26 12:03 ` [PATCH v4 1/3] dt-bindings: clock: add loongson2 clock include file Huacai Chen
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.