From: Detlev Casanova <detlev.casanova@collabora.com> To: linux-kernel@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), linux-arm-kernel@lists.infradead.org (moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE), Detlev Casanova <detlev.casanova@collabora.com> Subject: [PATCH] ARM: dts: imx6qdl-sabre: Add mmc aliases Date: Fri, 28 Oct 2022 10:18:11 -0400 [thread overview] Message-ID: <20221028141811.101122-1-detlev.casanova@collabora.com> (raw) If not specified, the mmc0 and mmc1 devices will be the devices mmc@2190000 and mmc@2194000, which are in disabled state on the iMX.6 Sabrelite devices. The actual SD card reader devices are the ones at mmc@2198000 and mmc@219c000. Set aliases to use the correct mmc devices order. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> --- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 22f8e2783cdf..12573e1f917c 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -14,6 +14,11 @@ chosen { stdout-path = &uart2; }; + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc4; + }; + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x40000000>; -- 2.38.1
WARNING: multiple messages have this Message-ID (diff)
From: Detlev Casanova <detlev.casanova@collabora.com> To: linux-kernel@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), linux-arm-kernel@lists.infradead.org (moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE), Detlev Casanova <detlev.casanova@collabora.com> Subject: [PATCH] ARM: dts: imx6qdl-sabre: Add mmc aliases Date: Fri, 28 Oct 2022 10:18:11 -0400 [thread overview] Message-ID: <20221028141811.101122-1-detlev.casanova@collabora.com> (raw) If not specified, the mmc0 and mmc1 devices will be the devices mmc@2190000 and mmc@2194000, which are in disabled state on the iMX.6 Sabrelite devices. The actual SD card reader devices are the ones at mmc@2198000 and mmc@219c000. Set aliases to use the correct mmc devices order. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> --- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 22f8e2783cdf..12573e1f917c 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -14,6 +14,11 @@ chosen { stdout-path = &uart2; }; + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc4; + }; + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x40000000>; -- 2.38.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-10-28 14:19 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-10-28 14:18 Detlev Casanova [this message] 2022-10-28 14:18 ` [PATCH] ARM: dts: imx6qdl-sabre: Add mmc aliases Detlev Casanova 2022-11-11 2:52 ` Shawn Guo 2022-11-11 2:52 ` Shawn Guo 2022-11-11 19:35 ` Detlev Casanova 2022-11-11 19:35 ` Detlev Casanova 2022-11-28 8:42 ` Ahmad Fatoum 2022-11-28 8:42 ` Ahmad Fatoum 2022-11-14 8:25 ` Shawn Guo 2022-11-14 8:25 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221028141811.101122-1-detlev.casanova@collabora.com \ --to=detlev.casanova@collabora.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.