* [PATCH 0/8] imx8: switch missing boards to binman
@ 2022-11-02 15:56 Oliver Graute
2022-11-02 15:56 ` [PATCH v5] imx: imx8qm-rom7720: switch " Oliver Graute
` (8 more replies)
0 siblings, 9 replies; 15+ messages in thread
From: Oliver Graute @ 2022-11-02 15:56 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Marcel Ziswiler, Ye Li, Horia Geantă,
Gaurav Jain, Denys Drozdov, u-boot
This patchsets switches the remaining imx8 boards to binman.
Oliver Graute (8):
imx: imx8qm-rom7720: switch to binman
imx: imx8qm: cgtqmx8: switch to binman
imx: imx8qxp: imx8qxp_mek switch to binman
imx: imx8qm: imx8qm_mek switch to binman
imx: imx8qxp: giedi switch to binman
imx: imx8qxp: deneb switch to binman
imx: imx8x: colibri: switch to binman
imx: imx8: apalis: switch to binman
arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi | 104 ++++++++++++++
arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi | 2 +
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 104 ++++++++++++++
arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi | 127 +++++++++++++++++
arch/arm/dts/imx8qm-cgtqmx8.dts | 1 +
arch/arm/dts/imx8qm-rom7720-a1.dts | 1 +
arch/arm/dts/imx8qm-u-boot.dtsi | 133 ++++++++++++++++++
arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi | 127 +++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 8 ++
.../advantech/imx8qm_rom7720_a1/imximage.cfg | 4 +-
board/congatec/cgtqmx8/imximage.cfg | 4 +-
board/freescale/imx8qm_mek/README | 2 +-
board/freescale/imx8qxp_mek/imximage.cfg | 3 +-
board/siemens/capricorn/imximage.cfg | 2 +-
configs/apalis-imx8_defconfig | 1 +
configs/cgtqmx8_defconfig | 4 +-
configs/colibri-imx8x_defconfig | 1 +
configs/deneb_defconfig | 2 +
configs/giedi_defconfig | 2 +
configs/imx8qm_mek_defconfig | 2 +
configs/imx8qm_rom7720_a1_4G_defconfig | 3 +-
configs/imx8qxp_mek_defconfig | 2 +
doc/board/advantech/imx8qm-rom7720-a1.rst | 3 +-
doc/board/congatec/cgtqmx8.rst | 3 +-
doc/board/nxp/imx8qxp_mek.rst | 2 +-
25 files changed, 632 insertions(+), 15 deletions(-)
create mode 100644 arch/arm/dts/imx8qm-u-boot.dtsi
--
2.17.1
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v5] imx: imx8qm-rom7720: switch to binman
2022-11-02 15:56 [PATCH 0/8] imx8: switch missing boards to binman Oliver Graute
@ 2022-11-02 15:56 ` Oliver Graute
2022-11-02 15:56 ` [PATCH v6] imx: imx8qm: cgtqmx8: " Oliver Graute
` (7 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Oliver Graute @ 2022-11-02 15:56 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Gaurav Jain, Ye Li, Marcel Ziswiler, Denys Drozdov,
Horia Geantă,
u-boot
Switch to use binman to pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
Changes for v5:
- renamed ftd to @fdt-SEQ
Changes for v4
- remove hardcoded dtb filename
- added CONFIG_FIT_EXTERNAL_OFFSET
Changes for v3
- just rebased to master
Changes for v2
- just rebased to master
arch/arm/dts/imx8qm-rom7720-a1.dts | 1 +
arch/arm/dts/imx8qm-u-boot.dtsi | 133 ++++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 1 +
.../advantech/imx8qm_rom7720_a1/imximage.cfg | 4 +-
configs/imx8qm_rom7720_a1_4G_defconfig | 3 +-
doc/board/advantech/imx8qm-rom7720-a1.rst | 3 +-
6 files changed, 140 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/dts/imx8qm-u-boot.dtsi
diff --git a/arch/arm/dts/imx8qm-rom7720-a1.dts b/arch/arm/dts/imx8qm-rom7720-a1.dts
index d1f2fff869..332d441c6d 100644
--- a/arch/arm/dts/imx8qm-rom7720-a1.dts
+++ b/arch/arm/dts/imx8qm-rom7720-a1.dts
@@ -10,6 +10,7 @@
/memreserve/ 0x80000000 0x00020000;
#include "fsl-imx8qm.dtsi"
+#include "imx8qm-u-boot.dtsi"
/ {
model = "Advantech iMX8QM Qseven series";
diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
new file mode 100644
index 0000000000..9b382f4d11
--- /dev/null
+++ b/arch/arm/dts/imx8qm-u-boot.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ u-boot-spl-ddr {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
+ };
+
+ spl {
+ filename = "spl.bin";
+
+ mkimage {
+ args = "-n spl/u-boot-spl.cfgout -T imx8image -e 0x100000";
+
+ blob {
+ filename = "u-boot-spl-ddr.bin";
+ };
+ };
+ };
+
+ itb {
+ filename = "u-boot.itb";
+
+ fit {
+ description = "Configuration to load ATF before U-Boot";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_SYS_TEXT_BASE>;
+ type = "standalone";
+
+ uboot-blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
+ };
+
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x00910000>;
+ load = <0x00091000>;
+ type = "firmware";
+
+ atf-blob {
+ filename = "bl31.bin";
+ type = "atf-bl31";
+ };
+ };
+
+ scfw {
+ arch = "arm64";
+ compression = "none";
+ description = "System Controler Firmware";
+ type = "firmware";
+
+ scfw_blob {
+ filename = "mx8qm-val-scfw-tcm.bin";
+ type = "blob-ext";
+ };
+ };
+
+ seco {
+ arch = "arm64";
+ compression = "none";
+ description = "Seco Firmware";
+ type = "firmware";
+
+ seco_blob {
+ filename = "mx8qm-ahab-container.img";
+ type = "blob-ext";
+ };
+ };
+
+ @fdt-SEQ {
+ compression = "none";
+ description = "NAME";
+ type = "flat_dt";
+
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
+ };
+ };
+
+ configurations {
+ default = "@config-DEFAULT-SEQ";
+
+ binman_configuration: @config-SEQ {
+ description = "NAME";
+ fdt = "fdt-SEQ";
+ firmware = "uboot";
+ loadables = "atf";
+ };
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl {
+ filename = "spl.bin";
+ offset = <0x0>;
+ type = "blob-ext";
+ };
+ };
+};
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index abb03340d8..71abbb33ea 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -82,6 +82,7 @@ config TARGET_CONGA_QMX8
config TARGET_IMX8QM_ROM7720_A1
bool "Support i.MX8QM ROM-7720-A1"
+ select BINMAN
select BOARD_LATE_INIT
select SUPPORT_SPL
select IMX8QM
diff --git a/board/advantech/imx8qm_rom7720_a1/imximage.cfg b/board/advantech/imx8qm_rom7720_a1/imximage.cfg
index 5ecde0c530..43035088e3 100644
--- a/board/advantech/imx8qm_rom7720_a1/imximage.cfg
+++ b/board/advantech/imx8qm_rom7720_a1/imximage.cfg
@@ -4,8 +4,8 @@
*/
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
+
/* SoC type IMX8QM */
SOC_TYPE IMX8QM
/* Append seco container image */
diff --git a/configs/imx8qm_rom7720_a1_4G_defconfig b/configs/imx8qm_rom7720_a1_4G_defconfig
index 3b099761a9..4b7ed6df01 100644
--- a/configs/imx8qm_rom7720_a1_4G_defconfig
+++ b/configs/imx8qm_rom7720_a1_4G_defconfig
@@ -20,8 +20,9 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
diff --git a/doc/board/advantech/imx8qm-rom7720-a1.rst b/doc/board/advantech/imx8qm-rom7720-a1.rst
index bd4be1dbeb..953cf01fde 100644
--- a/doc/board/advantech/imx8qm-rom7720-a1.rst
+++ b/doc/board/advantech/imx8qm-rom7720-a1.rst
@@ -57,8 +57,7 @@ Build U-Boot
$ export ATF_LOAD_ADDR=0x80000000
$ export BL33_LOAD_ADDR=0x80020000
$ make imx8qm_rom7720_a1_4G_defconfig
- $ make u-boot.bin
- $ make flash.bin
+ $ make
Flash the binary into the SD card
---------------------------------
--
2.17.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v6] imx: imx8qm: cgtqmx8: switch to binman
2022-11-02 15:56 [PATCH 0/8] imx8: switch missing boards to binman Oliver Graute
2022-11-02 15:56 ` [PATCH v5] imx: imx8qm-rom7720: switch " Oliver Graute
@ 2022-11-02 15:56 ` Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8qxp: imx8qxp_mek " Oliver Graute
` (6 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Oliver Graute @ 2022-11-02 15:56 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Marcel Ziswiler, Horia Geantă,
Denys Drozdov, Ye Li, Gaurav Jain, u-boot
Switch to use binman to pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
Changes for v6
- added CONFIG_SPL_BINMAN_UBOOT_SYMBOLS is not set
Changes for v5
- added CONFIG_FIT_EXTERNAL_OFFSET
Changes for v4
- rebased on master
Changes for v3
-added Reviewed-by
- rebased on master
arch/arm/dts/imx8qm-cgtqmx8.dts | 1 +
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/congatec/cgtqmx8/imximage.cfg | 4 ++--
configs/cgtqmx8_defconfig | 4 +++-
doc/board/congatec/cgtqmx8.rst | 3 +--
5 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm/dts/imx8qm-cgtqmx8.dts b/arch/arm/dts/imx8qm-cgtqmx8.dts
index 555c357f6f..919d00644f 100644
--- a/arch/arm/dts/imx8qm-cgtqmx8.dts
+++ b/arch/arm/dts/imx8qm-cgtqmx8.dts
@@ -12,6 +12,7 @@
/memreserve/ 0x80000000 0x00020000;
#include "fsl-imx8qm.dtsi"
+#include "imx8qm-u-boot.dtsi"
/ {
model = "Congatec QMX8 Qseven series";
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index a7e3af57dc..d423cf8563 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -76,6 +76,7 @@ config TARGET_IMX8QM_MEK
config TARGET_CONGA_QMX8
bool "Support congatec conga-QMX8 board"
+ select BINMAN
select BOARD_LATE_INIT
select SUPPORT_SPL
select IMX8QM
diff --git a/board/congatec/cgtqmx8/imximage.cfg b/board/congatec/cgtqmx8/imximage.cfg
index 5ecde0c530..43035088e3 100644
--- a/board/congatec/cgtqmx8/imximage.cfg
+++ b/board/congatec/cgtqmx8/imximage.cfg
@@ -4,8 +4,8 @@
*/
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
+
/* SoC type IMX8QM */
SOC_TYPE IMX8QM
/* Append seco container image */
diff --git a/configs/cgtqmx8_defconfig b/configs/cgtqmx8_defconfig
index ddc65a06b9..4d1dfe4212 100644
--- a/configs/cgtqmx8_defconfig
+++ b/configs/cgtqmx8_defconfig
@@ -20,8 +20,10 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+# CONFIG_SPL_BINMAN_UBOOT_SYMBOLS is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
diff --git a/doc/board/congatec/cgtqmx8.rst b/doc/board/congatec/cgtqmx8.rst
index bccdef2f16..16711a844d 100644
--- a/doc/board/congatec/cgtqmx8.rst
+++ b/doc/board/congatec/cgtqmx8.rst
@@ -57,8 +57,7 @@ Build U-Boot
$ export ATF_LOAD_ADDR=0x80000000
$ export BL33_LOAD_ADDR=0x80020000
$ make cgtqmx8_defconfig
- $ make u-boot.bin
- $ make flash.bin
+ $ make
Flash the binary into the SD card
---------------------------------
--
2.17.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v1] imx: imx8qxp: imx8qxp_mek switch to binman
2022-11-02 15:56 [PATCH 0/8] imx8: switch missing boards to binman Oliver Graute
2022-11-02 15:56 ` [PATCH v5] imx: imx8qm-rom7720: switch " Oliver Graute
2022-11-02 15:56 ` [PATCH v6] imx: imx8qm: cgtqmx8: " Oliver Graute
@ 2022-11-02 15:56 ` Oliver Graute
2022-11-02 15:56 ` [PATCH v2] imx: imx8qm: imx8qm_mek " Oliver Graute
` (5 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Oliver Graute @ 2022-11-02 15:56 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Horia Geantă,
Denys Drozdov, Ye Li, Gaurav Jain, Marcel Ziswiler, u-boot
Switch to use binman pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi | 127 +++++++++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/freescale/imx8qxp_mek/imximage.cfg | 3 +-
configs/imx8qxp_mek_defconfig | 2 +
doc/board/nxp/imx8qxp_mek.rst | 2 +-
5 files changed, 132 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
index ae037c7550..073a401a1c 100644
--- a/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
@@ -3,6 +3,133 @@
* Copyright 2018, 2021 NXP
*/
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ u-boot-spl-ddr {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
+ };
+
+ spl {
+ filename = "spl.bin";
+
+ mkimage {
+ args = "-n spl/u-boot-spl.cfgout -T imx8image -e 0x100000";
+
+ blob {
+ filename = "u-boot-spl-ddr.bin";
+ };
+ };
+ };
+
+ itb {
+ filename = "u-boot.itb";
+
+ fit {
+ description = "Configuration to load ATF before U-Boot";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_SYS_TEXT_BASE>;
+ type = "standalone";
+
+ uboot-blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
+ };
+
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x00910000>;
+ load = <0x00091000>;
+ type = "firmware";
+
+ atf-blob {
+ filename = "bl31.bin";
+ type = "atf-bl31";
+ };
+ };
+
+ scfw {
+ arch = "arm64";
+ compression = "none";
+ description = "System Controler Firmware";
+ type = "firmware";
+
+ scfw_blob {
+ filename = "mx8qx-mek-scfw-tcm.bin";
+ type = "blob-ext";
+ };
+ };
+
+ seco {
+ arch = "arm64";
+ compression = "none";
+ description = "Seco Firmware";
+ type = "firmware";
+
+ seco_blob {
+ filename = "mx8qxc0-ahab-container.img";
+ type = "blob-ext";
+ };
+ };
+
+ fdt {
+ type = "flat_dt";
+ compression = "none";
+
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf";
+
+ conf {
+ fdt = "fdt";
+ firmware = "uboot";
+ loadables = "atf";
+ };
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl {
+ filename = "spl.bin";
+ offset = <0x0>;
+ type = "blob-ext";
+ };
+ };
+};
+
&{/imx8qx-pm} {
u-boot,dm-spl;
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index d423cf8563..23a7fcf361 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -90,6 +90,7 @@ config TARGET_IMX8QM_ROM7720_A1
config TARGET_IMX8QXP_MEK
bool "Support i.MX8QXP MEK board"
+ select BINMAN
select BOARD_LATE_INIT
select IMX8QXP
select FSL_CAAM
diff --git a/board/freescale/imx8qxp_mek/imximage.cfg b/board/freescale/imx8qxp_mek/imximage.cfg
index 89a4736ab7..88d6955a9e 100644
--- a/board/freescale/imx8qxp_mek/imximage.cfg
+++ b/board/freescale/imx8qxp_mek/imximage.cfg
@@ -7,8 +7,7 @@
*/
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
/* SoC type IMX8QX */
SOC_TYPE IMX8QX
/* Append seco container image */
diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig
index 73600c5a8c..0e22f13c7f 100644
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@@ -23,6 +23,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=3
diff --git a/doc/board/nxp/imx8qxp_mek.rst b/doc/board/nxp/imx8qxp_mek.rst
index 215627cfa6..708db1952e 100644
--- a/doc/board/nxp/imx8qxp_mek.rst
+++ b/doc/board/nxp/imx8qxp_mek.rst
@@ -50,7 +50,7 @@ Build U-Boot
.. code-block:: bash
$ make imx8qxp_mek_defconfig
- $ make flash.bin
+ $ make
Flash the binary into the SD card
---------------------------------
--
2.17.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2] imx: imx8qm: imx8qm_mek switch to binman
2022-11-02 15:56 [PATCH 0/8] imx8: switch missing boards to binman Oliver Graute
` (2 preceding siblings ...)
2022-11-02 15:56 ` [PATCH v1] imx: imx8qxp: imx8qxp_mek " Oliver Graute
@ 2022-11-02 15:56 ` Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8qxp: giedi " Oliver Graute
` (4 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Oliver Graute @ 2022-11-02 15:56 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Denys Drozdov, Marcel Ziswiler, Gaurav Jain, Horia Geantă,
Ye Li, u-boot
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi | 2 ++
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/freescale/imx8qm_mek/README | 2 +-
configs/imx8qm_2ek_defconfig | 2 ++
4 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
index a95209e141..eefdccf992 100644
--- a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
@@ -3,6 +3,8 @@
* Copyright 2018, 2021 NXP
*/
+#include "imx8qm-u-boot.dtsi"
+
&{/imx8qm-pm} {
u-boot,dm-spl;
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 23a7fcf361..4ccbabf506 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -68,6 +68,7 @@ config TARGET_GIEDI
config TARGET_IMX8QM_MEK
bool "Support i.MX8QM MEK board"
+ select BINMAN
select BOARD_LATE_INIT
select IMX8QM
select FSL_CAAM
diff --git a/board/freescale/imx8qm_mek/README b/board/freescale/imx8qm_mek/README
index 570ed7e210..b1a4c6cc82 100644
--- a/board/freescale/imx8qm_mek/README
+++ b/board/freescale/imx8qm_mek/README
@@ -40,7 +40,7 @@ And copy the following firmwares to U-Boot folder:
Build U-Boot
============
$ make imx8qm_mek_defconfig
-$ make flash.bin
+$ make
Flash the binary into the SD card
=================================
diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
index b973b809be..25b51cf1ec 100644
--- a/configs/imx8qm_mek_defconfig
+++ b/configs/imx8qm_mek_defconfig
@@ -23,6 +23,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=3
--
2.17.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v1] imx: imx8qxp: giedi switch to binman
2022-11-02 15:56 [PATCH 0/8] imx8: switch missing boards to binman Oliver Graute
` (3 preceding siblings ...)
2022-11-02 15:56 ` [PATCH v2] imx: imx8qm: imx8qm_mek " Oliver Graute
@ 2022-11-02 15:56 ` Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8qxp: deneb " Oliver Graute
` (3 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Oliver Graute @ 2022-11-02 15:56 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Anatolij Gustschin, Gaurav Jain, Horia Geantă,
Denys Drozdov, Ye Li, Marcel Ziswiler, u-boot
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi | 127 +++++++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/siemens/capricorn/imximage.cfg | 2 +-
configs/giedi_defconfig | 2 +
4 files changed, 131 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi b/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
index 1cf58fc3f9..020f58fd0f 100644
--- a/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
+++ b/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
@@ -3,6 +3,133 @@
* Copyright 2019 Siemens AG
*/
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ u-boot-spl-ddr {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
+ };
+
+ spl {
+ filename = "spl.bin";
+
+ mkimage {
+ args = "-n spl/u-boot-spl.cfgout -T imx8image -e 0x100000";
+
+ blob {
+ filename = "u-boot-spl-ddr.bin";
+ };
+ };
+ };
+
+ itb {
+ filename = "u-boot.itb";
+
+ fit {
+ description = "Configuration to load ATF before U-Boot";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_SYS_TEXT_BASE>;
+ type = "standalone";
+
+ uboot-blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
+ };
+
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x00910000>;
+ load = <0x00091000>;
+ type = "firmware";
+
+ atf-blob {
+ filename = "bl31.bin";
+ type = "atf-bl31";
+ };
+ };
+
+ scfw {
+ arch = "arm64";
+ compression = "none";
+ description = "System Controler Firmware";
+ type = "firmware";
+
+ scfw_blob {
+ filename = "mx8qx-mek-scfw-tcm.bin";
+ type = "blob-ext";
+ };
+ };
+
+ seco {
+ arch = "arm64";
+ compression = "none";
+ description = "Seco Firmware";
+ type = "firmware";
+
+ seco_blob {
+ filename = "mx8qxc0-ahab-container.img";
+ type = "blob-ext";
+ };
+ };
+
+ fdt {
+ type = "flat_dt";
+ compression = "none";
+
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf";
+
+ conf {
+ fdt = "fdt";
+ firmware = "uboot";
+ loadables = "atf";
+ };
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl {
+ filename = "spl.bin";
+ offset = <0x0>;
+ type = "blob-ext";
+ };
+ };
+};
+
&{/imx8qx-pm} {
u-boot,dm-spl;
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 4ccbabf506..63d99ea23e 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -62,6 +62,7 @@ config TARGET_DENEB
config TARGET_GIEDI
bool "Support i.MX8QXP Capricorn Giedi board"
+ select BINMAN
select BOARD_LATE_INIT
select FACTORYSET
select IMX8QXP
diff --git a/board/siemens/capricorn/imximage.cfg b/board/siemens/capricorn/imximage.cfg
index fa871bac21..4350e2967c 100644
--- a/board/siemens/capricorn/imximage.cfg
+++ b/board/siemens/capricorn/imximage.cfg
@@ -8,7 +8,7 @@
/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
/* SoC type IMX8QX */
SOC_TYPE IMX8QX
/* Append seco container image */
diff --git a/configs/giedi_defconfig b/configs/giedi_defconfig
index ab7fa51172..fdc6b0b2b3 100644
--- a/configs/giedi_defconfig
+++ b/configs/giedi_defconfig
@@ -26,6 +26,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=3
--
2.17.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v1] imx: imx8qxp: deneb switch to binman
2022-11-02 15:56 [PATCH 0/8] imx8: switch missing boards to binman Oliver Graute
` (4 preceding siblings ...)
2022-11-02 15:56 ` [PATCH v1] imx: imx8qxp: giedi " Oliver Graute
@ 2022-11-02 15:56 ` Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8x: colibri: " Oliver Graute
` (2 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Oliver Graute @ 2022-11-02 15:56 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Anatolij Gustschin, Denys Drozdov, Marcel Ziswiler,
Horia Geantă,
Ye Li, Gaurav Jain, u-boot
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/mach-imx/imx8/Kconfig | 1 +
configs/deneb_defconfig | 2 ++
2 files changed, 3 insertions(+)
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 63d99ea23e..018b87b85b 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -56,6 +56,7 @@ config TARGET_COLIBRI_IMX8X
config TARGET_DENEB
bool "Support i.MX8QXP Capricorn Deneb board"
+ select BINMAN
select BOARD_LATE_INIT
select FACTORYSET
select IMX8QXP
diff --git a/configs/deneb_defconfig b/configs/deneb_defconfig
index 2497b5d922..22efc998f6 100644
--- a/configs/deneb_defconfig
+++ b/configs/deneb_defconfig
@@ -26,6 +26,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=3
--
2.17.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v1] imx: imx8x: colibri: switch to binman
2022-11-02 15:56 [PATCH 0/8] imx8: switch missing boards to binman Oliver Graute
` (5 preceding siblings ...)
2022-11-02 15:56 ` [PATCH v1] imx: imx8qxp: deneb " Oliver Graute
@ 2022-11-02 15:56 ` Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8: apalis: " Oliver Graute
2022-11-02 16:07 ` [PATCH 0/8] imx8: switch missing boards " Fabio Estevam
8 siblings, 0 replies; 15+ messages in thread
From: Oliver Graute @ 2022-11-02 15:56 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Marcel Ziswiler, Ye Li, Denys Drozdov, Horia Geantă,
Gaurav Jain, u-boot
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 104 +++++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 1 +
configs/colibri-imx8x_defconfig | 1 +
3 files changed, 106 insertions(+)
diff --git a/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
index 322429a98a..a9b92c803c 100644
--- a/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
@@ -2,6 +2,110 @@
/*
* Copyright 2019 Toradex AG
*/
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+
+ itb {
+ filename = "u-boot.itb";
+
+ fit {
+ description = "Configuration to load ATF before U-Boot";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_SYS_TEXT_BASE>;
+ type = "standalone";
+
+ uboot-blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
+ };
+
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x00910000>;
+ load = <0x00091000>;
+ type = "firmware";
+
+ atf-blob {
+ filename = "bl31.bin";
+ type = "atf-bl31";
+ };
+ };
+
+ scfw {
+ arch = "arm64";
+ compression = "none";
+ description = "System Controler Firmware";
+ type = "firmware";
+
+ scfw_blob {
+ filename = "mx8qx-colibri-scfw-tcm.bin";
+ type = "blob-ext";
+ };
+ };
+
+ seco {
+ arch = "arm64";
+ compression = "none";
+ description = "Seco Firmware";
+ type = "firmware";
+
+ seco_blob {
+ filename = "mx8qx-ahab-container.img";
+ type = "blob-ext";
+ };
+ };
+
+ fdt {
+ type = "flat_dt";
+ compression = "none";
+
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf";
+
+ conf {
+ fdt = "fdt";
+ firmware = "uboot";
+ loadables = "atf";
+ };
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl {
+ filename = "spl.bin";
+ offset = <0x0>;
+ type = "blob-ext";
+ };
+ };
+
+};
&{/imx8qx-pm} {
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 018b87b85b..37d12d1895 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -51,6 +51,7 @@ config TARGET_APALIS_IMX8
config TARGET_COLIBRI_IMX8X
bool "Support Colibri iMX8X module"
+ select BINMAN
select BOARD_LATE_INIT
select IMX8QXP
diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index 1a207f99d0..2697775b44 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -17,6 +17,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_FIT_VERBOSE=y
CONFIG_LOG=y
# CONFIG_DISPLAY_BOARDINFO is not set
--
2.17.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v1] imx: imx8: apalis: switch to binman
2022-11-02 15:56 [PATCH 0/8] imx8: switch missing boards to binman Oliver Graute
` (6 preceding siblings ...)
2022-11-02 15:56 ` [PATCH v1] imx: imx8x: colibri: " Oliver Graute
@ 2022-11-02 15:56 ` Oliver Graute
2022-11-02 16:16 ` Fabio Estevam
2022-11-02 16:07 ` [PATCH 0/8] imx8: switch missing boards " Fabio Estevam
8 siblings, 1 reply; 15+ messages in thread
From: Oliver Graute @ 2022-11-02 15:56 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Marcel Ziswiler, Ye Li, Gaurav Jain, Denys Drozdov,
Horia Geantă,
u-boot
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi | 104 +++++++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 1 +
configs/apalis-imx8_defconfig | 1 +
3 files changed, 106 insertions(+)
diff --git a/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi
index 956d724979..587b6496a9 100644
--- a/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi
@@ -3,6 +3,110 @@
* Copyright 2019 Toradex AG
*/
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+
+ itb {
+ filename = "u-boot.itb";
+
+ fit {
+ description = "Configuration to load ATF before U-Boot";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_SYS_TEXT_BASE>;
+ type = "standalone";
+
+ uboot-blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
+ };
+
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x00910000>;
+ load = <0x00091000>;
+ type = "firmware";
+
+ atf-blob {
+ filename = "bl31.bin";
+ type = "atf-bl31";
+ };
+ };
+
+ scfw {
+ arch = "arm64";
+ compression = "none";
+ description = "System Controler Firmware";
+ type = "firmware";
+
+ scfw_blob {
+ filename = "mx8qm-apalis-scfw-tcm.bin";
+ type = "blob-ext";
+ };
+ };
+
+ seco {
+ arch = "arm64";
+ compression = "none";
+ description = "Seco Firmware";
+ type = "firmware";
+
+ seco_blob {
+ filename = "ahab-container.img";
+ type = "blob-ext";
+ };
+ };
+
+ fdt {
+ type = "flat_dt";
+ compression = "none";
+
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf";
+
+ conf {
+ fdt = "fdt";
+ firmware = "uboot";
+ loadables = "atf";
+ };
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl {
+ filename = "spl.bin";
+ offset = <0x0>;
+ type = "blob-ext";
+ };
+ };
+};
+
&mu {
u-boot,dm-pre-proper;
};
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 37d12d1895..91bd888308 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -46,6 +46,7 @@ choice
config TARGET_APALIS_IMX8
bool "Support Apalis iMX8 module"
+ select BINMAN
select BOARD_LATE_INIT
select IMX8QM
diff --git a/configs/apalis-imx8_defconfig b/configs/apalis-imx8_defconfig
index 32e105a557..0c331b62cb 100644
--- a/configs/apalis-imx8_defconfig
+++ b/configs/apalis-imx8_defconfig
@@ -17,6 +17,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_FIT_VERBOSE=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_LOG=y
--
2.17.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 0/8] imx8: switch missing boards to binman
2022-11-02 15:56 [PATCH 0/8] imx8: switch missing boards to binman Oliver Graute
` (7 preceding siblings ...)
2022-11-02 15:56 ` [PATCH v1] imx: imx8: apalis: " Oliver Graute
@ 2022-11-02 16:07 ` Fabio Estevam
8 siblings, 0 replies; 15+ messages in thread
From: Fabio Estevam @ 2022-11-02 16:07 UTC (permalink / raw)
To: Oliver Graute
Cc: sbabic, oliver.graute, peng.fan, uboot-imx, Marcel Ziswiler,
Ye Li, Horia Geantă,
Gaurav Jain, Denys Drozdov, u-boot
On Wed, Nov 2, 2022 at 12:57 PM Oliver Graute
<oliver.graute@kococonnector.com> wrote:
>
> This patchsets switches the remaining imx8 boards to binman.
>
> Oliver Graute (8):
> imx: imx8qm-rom7720: switch to binman
> imx: imx8qm: cgtqmx8: switch to binman
> imx: imx8qxp: imx8qxp_mek switch to binman
> imx: imx8qm: imx8qm_mek switch to binman
> imx: imx8qxp: giedi switch to binman
> imx: imx8qxp: deneb switch to binman
> imx: imx8x: colibri: switch to binman
> imx: imx8: apalis: switch to binman
Your patches are not numbered. I expect to see 1/8, 2/8, ...8/8.
git format-patch -8 does the trick.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v1] imx: imx8: apalis: switch to binman
2022-11-02 15:56 ` [PATCH v1] imx: imx8: apalis: " Oliver Graute
@ 2022-11-02 16:16 ` Fabio Estevam
2022-11-04 12:38 ` Oliver Graute
0 siblings, 1 reply; 15+ messages in thread
From: Fabio Estevam @ 2022-11-02 16:16 UTC (permalink / raw)
To: Oliver Graute
Cc: sbabic, oliver.graute, peng.fan, uboot-imx, Marcel Ziswiler,
Ye Li, Gaurav Jain, Denys Drozdov, Horia Geantă,
u-boot
On Wed, Nov 2, 2022 at 12:59 PM Oliver Graute
<oliver.graute@kococonnector.com> wrote:
Please add a commit log.
> Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
> +&binman {
> +
> + itb {
> + filename = "u-boot.itb";
> +
> + fit {
> + description = "Configuration to load ATF before U-Boot";
> + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
Can't all boards use the common the binman nodes from
arch/arm/dts/imx8qm-u-boot.dtsi instead?
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v1] imx: imx8: apalis: switch to binman
2022-11-02 16:16 ` Fabio Estevam
@ 2022-11-04 12:38 ` Oliver Graute
2022-11-04 12:58 ` Fabio Estevam
2022-11-04 13:03 ` Oliver Graute
0 siblings, 2 replies; 15+ messages in thread
From: Oliver Graute @ 2022-11-04 12:38 UTC (permalink / raw)
To: Fabio Estevam
Cc: sbabic, peng.fan, uboot-imx, Marcel Ziswiler, Ye Li, Gaurav Jain,
Denys Drozdov, Horia Geantă,
u-boot
On 02/11/22, Fabio Estevam wrote:
> On Wed, Nov 2, 2022 at 12:59 PM Oliver Graute
> <oliver.graute@kococonnector.com> wrote:
>
> Please add a commit log.
ok
>
> > Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
>
> > +&binman {
> > +
> > + itb {
> > + filename = "u-boot.itb";
> > +
> > + fit {
> > + description = "Configuration to load ATF before U-Boot";
> > + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
>
> Can't all boards use the common the binman nodes from
> arch/arm/dts/imx8qm-u-boot.dtsi instead?
I'am about to try that but I run into the following error:
binman: Filename 'spl/u-boot-spl.bin' not found in input path (.,.,./board/toradex/apalis-imx8,arch/arm/dts) (cwd='/home/graute/u-boot-upstream')
Makefile:1109: recipe for target 'all' failed
make: *** [all] Error 1
The error disappear if I remove binman/u-boot-spl-ddr and binman/spl
node in the common file.
So some of these boards needs the binman/u-boot-spl-ddr and binman/spl
node and others not. What is the proper solution to deal with this
difference here?
Best regards,
Oliver
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v1] imx: imx8: apalis: switch to binman
2022-11-04 12:38 ` Oliver Graute
@ 2022-11-04 12:58 ` Fabio Estevam
2022-11-04 13:07 ` Oliver Graute
2022-11-04 13:03 ` Oliver Graute
1 sibling, 1 reply; 15+ messages in thread
From: Fabio Estevam @ 2022-11-04 12:58 UTC (permalink / raw)
To: Fabio Estevam, sbabic, peng.fan, uboot-imx, Marcel Ziswiler,
Ye Li, Gaurav Jain, Denys Drozdov, Horia Geantă,
u-boot
Hi Oliver,
On Fri, Nov 4, 2022 at 9:39 AM Oliver Graute <oliver.graute@gmail.com> wrote:
> > Can't all boards use the common the binman nodes from
> > arch/arm/dts/imx8qm-u-boot.dtsi instead?
>
> I'am about to try that but I run into the following error:
>
> binman: Filename 'spl/u-boot-spl.bin' not found in input path (.,.,./board/toradex/apalis-imx8,arch/arm/dts) (cwd='/home/graute/u-boot-upstream')
> Makefile:1109: recipe for target 'all' failed
> make: *** [all] Error 1
>
> The error disappear if I remove binman/u-boot-spl-ddr and binman/spl
> node in the common file.
>
> So some of these boards needs the binman/u-boot-spl-ddr and binman/spl
> node and others not. What is the proper solution to deal with this
> difference here?
Looking inside configs/apalis-imx8_defconfig, I see it does not use
SPL. That's why 'spl/u-boot-spl.bin' is not present.
I think you should protect the binman/u-boot-spl-ddr and binman/spl
nodes by adding #ifdef CONFIG_SPL.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v1] imx: imx8: apalis: switch to binman
2022-11-04 12:38 ` Oliver Graute
2022-11-04 12:58 ` Fabio Estevam
@ 2022-11-04 13:03 ` Oliver Graute
1 sibling, 0 replies; 15+ messages in thread
From: Oliver Graute @ 2022-11-04 13:03 UTC (permalink / raw)
To: Fabio Estevam, sbabic, peng.fan, uboot-imx, Marcel Ziswiler,
Ye Li, Gaurav Jain, Denys Drozdov, Horia Geantă,
u-boot
On 04/11/22, Oliver Graute wrote:
> On 02/11/22, Fabio Estevam wrote:
> > On Wed, Nov 2, 2022 at 12:59 PM Oliver Graute
> > <oliver.graute@kococonnector.com> wrote:
> >
> > Please add a commit log.
>
> ok
>
> >
> > > Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
> >
> > > +&binman {
> > > +
> > > + itb {
> > > + filename = "u-boot.itb";
> > > +
> > > + fit {
> > > + description = "Configuration to load ATF before U-Boot";
> > > + fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
> >
> > Can't all boards use the common the binman nodes from
> > arch/arm/dts/imx8qm-u-boot.dtsi instead?
>
> I'am about to try that but I run into the following error:
>
> binman: Filename 'spl/u-boot-spl.bin' not found in input path (.,.,./board/toradex/apalis-imx8,arch/arm/dts) (cwd='/home/graute/u-boot-upstream')
> Makefile:1109: recipe for target 'all' failed
> make: *** [all] Error 1
>
> The error disappear if I remove binman/u-boot-spl-ddr and binman/spl
> node in the common file.
>
> So some of these boards needs the binman/u-boot-spl-ddr and binman/spl
> node and others not. What is the proper solution to deal with this
> difference here?
according to this commit there are indeed different requirements:
commit 8e0d963b19adfb98e8c7c941f44e0f36e9f91303
Author: Peng Fan <peng.fan@nxp.com>
Date: Fri Dec 21 06:21:26 2018 +0000
dts: imx8qxp-mek: introduce u-boot dtsi
Introduce u-boot dtsi for i.MX8QXP MEK board.
we do not introduce a common dtsi for SoC, because different board
has different requirement on which needs to be enabled in SPL DM.
So any proposal?
Best regards,
Oliver
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v1] imx: imx8: apalis: switch to binman
2022-11-04 12:58 ` Fabio Estevam
@ 2022-11-04 13:07 ` Oliver Graute
0 siblings, 0 replies; 15+ messages in thread
From: Oliver Graute @ 2022-11-04 13:07 UTC (permalink / raw)
To: Fabio Estevam
Cc: sbabic, peng.fan, uboot-imx, Marcel Ziswiler, Ye Li, Gaurav Jain,
Denys Drozdov, Horia Geantă,
u-boot
On 04/11/22, Fabio Estevam wrote:
> Hi Oliver,
>
> On Fri, Nov 4, 2022 at 9:39 AM Oliver Graute <oliver.graute@gmail.com> wrote:
>
> > > Can't all boards use the common the binman nodes from
> > > arch/arm/dts/imx8qm-u-boot.dtsi instead?
> >
> > I'am about to try that but I run into the following error:
> >
> > binman: Filename 'spl/u-boot-spl.bin' not found in input path (.,.,./board/toradex/apalis-imx8,arch/arm/dts) (cwd='/home/graute/u-boot-upstream')
> > Makefile:1109: recipe for target 'all' failed
> > make: *** [all] Error 1
> >
> > The error disappear if I remove binman/u-boot-spl-ddr and binman/spl
> > node in the common file.
> >
> > So some of these boards needs the binman/u-boot-spl-ddr and binman/spl
> > node and others not. What is the proper solution to deal with this
> > difference here?
>
> Looking inside configs/apalis-imx8_defconfig, I see it does not use
> SPL. That's why 'spl/u-boot-spl.bin' is not present.
>
> I think you should protect the binman/u-boot-spl-ddr and binman/spl
> nodes by adding #ifdef CONFIG_SPL.
ok thx
Best Regards,
Oliver
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2022-11-04 13:07 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-02 15:56 [PATCH 0/8] imx8: switch missing boards to binman Oliver Graute
2022-11-02 15:56 ` [PATCH v5] imx: imx8qm-rom7720: switch " Oliver Graute
2022-11-02 15:56 ` [PATCH v6] imx: imx8qm: cgtqmx8: " Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8qxp: imx8qxp_mek " Oliver Graute
2022-11-02 15:56 ` [PATCH v2] imx: imx8qm: imx8qm_mek " Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8qxp: giedi " Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8qxp: deneb " Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8x: colibri: " Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8: apalis: " Oliver Graute
2022-11-02 16:16 ` Fabio Estevam
2022-11-04 12:38 ` Oliver Graute
2022-11-04 12:58 ` Fabio Estevam
2022-11-04 13:07 ` Oliver Graute
2022-11-04 13:03 ` Oliver Graute
2022-11-02 16:07 ` [PATCH 0/8] imx8: switch missing boards " Fabio Estevam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.