* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2022-11-08 12:22 ` [PATCH v3 1/2] " Ibrahim Tilki
@ 2022-11-08 12:57 ` Christophe JAILLET
2022-11-08 13:27 ` Guenter Roeck
` (3 subsequent siblings)
4 siblings, 0 replies; 15+ messages in thread
From: Christophe JAILLET @ 2022-11-08 12:57 UTC (permalink / raw)
To: ibrahim.tilki
Cc: Zeynep.Arslanbenzer, a.zummo, alexandre.belloni, devicetree,
jdelvare, krzysztof.kozlowski+dt, linux-hwmon, linux-kernel,
linux-rtc, linux, robh+dt
Le 08/11/2022 à 13:22, Ibrahim Tilki a écrit :
> Adding support for Analog Devices MAX313XX series RTCs.
>
> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
> ---
[...]
> +static int max313xx_clkout_register(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + int ret;
> +
> + if (!device_property_present(dev, "#clock-cells"))
> + return 0;
> +
> + max313xx_clk_init.name = rtc->chip->clkout_name;
> + device_property_read_string(dev, "clock-output-names",
> + &max313xx_clk_init.name);
> + rtc->clkout.init = &max313xx_clk_init;
> +
> + ret = devm_clk_hw_register(dev, &rtc->clkout);
> + if (ret)
> + return dev_err_probe(dev, ret, "cannot register clock\n");
> +
> + return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
> + rtc->clkout.clk);
Hi,
No devm like functionality here?
devm_of_clk_add_hw_provider()? (not sure of the impact or not of the
"_hw_" in the function name)
> +}
[...]
> +static int max313xx_irq_init(struct device *dev, const char *devname)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool wakeup;
> + int ret;
> +
> + rtc->irq = rtc->irqs[0];
> +
> + switch (rtc->id) {
> + case ID_MAX31328:
> + /* max31328 sqw ant int pin is shared */
> + if (rtc->id == ID_MAX31328 && rtc->irq > 0 && rtc->clkout.clk)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "cannot have both sqw clock output and irq enabled");
> +
> + break;
> + case ID_MAX31331:
> + case ID_MAX31334:
> + if (rtc->clkout.clk) {
> + /* clockout needs to be enabled for using INTA pin */
> + ret = clk_prepare_enable(rtc->clkout.clk);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "cannot enable clkout\n");
> + } else {
> + rtc->irq = rtc->irqs[1];
> + }
> + break;
> + default:
> + if (rtc->clkin) {
> + rtc->irq = rtc->irqs[1];
> +
> + /* wrong interrupt specified */
> + if (rtc->irqs[0] > 0 && rtc->irqs[1] <= 0)
> + dev_warn(dev, "INTA is specified but INTB required for irq when clkin is enabled\n");
> +
> + if (rtc->clkout.clk && rtc->irq > 0)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "irq not possible when both clkin and clkout are configured\n");
> +
> + if (rtc->irq <= 0)
> + break;
> +
> + /* clkout needs to be disabled for using INTB pin */
> + if (rtc->chip->clkout->en_invert)
> + ret = regmap_set_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> + else
> + ret = regmap_clear_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> +
> + if (ret)
> + return ret;
> + }
> + break;
> + }
> +
> + if (rtc->irq > 0) {
> + ret = devm_request_threaded_irq(dev, rtc->irq, NULL,
> + &max313xx_irq, IRQF_ONESHOT,
> + devname, rtc);
> + if (ret)
> + return ret;
> +
> + wakeup = device_property_read_bool(dev, "wakeup-source");
> + return device_init_wakeup(dev, wakeup);
> + }
> +
> + __clear_bit(RTC_FEATURE_ALARM, rtc->rtc->features);
Is it safe? Does it worth it to use __clear_bit() instead of clear_bit()
here?
> +
> + return 0;
> +}
[...]
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2022-11-08 12:22 ` [PATCH v3 1/2] " Ibrahim Tilki
2022-11-08 12:57 ` Christophe JAILLET
@ 2022-11-08 13:27 ` Guenter Roeck
2022-11-09 10:38 ` kernel test robot
` (2 subsequent siblings)
4 siblings, 0 replies; 15+ messages in thread
From: Guenter Roeck @ 2022-11-08 13:27 UTC (permalink / raw)
To: Ibrahim Tilki
Cc: a.zummo, alexandre.belloni, jdelvare, robh+dt,
krzysztof.kozlowski+dt, linux-rtc, linux-kernel, linux-hwmon,
devicetree, Zeynep Arslanbenzer
On Tue, Nov 08, 2022 at 03:22:53PM +0300, Ibrahim Tilki wrote:
> Adding support for Analog Devices MAX313XX series RTCs.
>
> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
For the hwmon part:
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/rtc/Kconfig | 11 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 1082 insertions(+)
> create mode 100644 drivers/rtc/rtc-max313xx.c
>
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index b8de25118..71ea390dc 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -323,6 +323,17 @@ config RTC_DRV_LP8788
> help
> Say Y to enable support for the LP8788 RTC/ALARM driver.
>
> +config RTC_DRV_MAX313XX
> + tristate "Analog Devices MAX313XX RTC driver"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + If you say yes here you will get support for the
> + Analog Devices MAX313XX series RTC family.
> +
> + This driver can also be built as a module. If so, the module
> + will be called rtc-max313xx.
> +
> config RTC_DRV_MAX6900
> tristate "Maxim MAX6900"
> help
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index aab22bc63..3d1aab897 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -89,6 +89,7 @@ obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o
> obj-$(CONFIG_RTC_DRV_M48T35) += rtc-m48t35.o
> obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
> obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
> +obj-$(CONFIG_RTC_DRV_MAX313XX) += rtc-max313xx.o
> obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
> obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
> obj-$(CONFIG_RTC_DRV_MAX6916) += rtc-max6916.o
> diff --git a/drivers/rtc/rtc-max313xx.c b/drivers/rtc/rtc-max313xx.c
> new file mode 100644
> index 000000000..b1f7ab189
> --- /dev/null
> +++ b/drivers/rtc/rtc-max313xx.c
> @@ -0,0 +1,1070 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Analog Devices MAX313XX series I2C RTC driver
> + *
> + * Copyright 2022 Analog Devices Inc.
> + */
> +#include <asm-generic/unaligned.h>
> +#include <linux/bcd.h>
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/hwmon.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +#include <linux/util_macros.h>
> +
> +/* common registers */
> +#define MAX313XX_INT_ALARM1 BIT(0)
> +#define MAX313XX_INT_ALARM2 BIT(1)
> +#define MAX313XX_HRS_F_12_24 BIT(6)
> +#define MAX313XX_HRS_F_AM_PM BIT(5)
> +#define MAX313XX_MONTH_CENTURY BIT(7)
> +
> +#define MAX313XX_TMR_CFG_ENABLE BIT(4)
> +#define MAX313XX_TMR_CFG_FREQ_MASK GENMASK(1, 0)
> +#define MAX313XX_TMR_CFG_FREQ_16HZ 0x03
> +
> +#define MAX313XX_REG_MINUTE 0x01
> +#define MAX313XX_REG_HOUR 0x02
> +
> +#define MAX313XX_TIME_SIZE 0x07
> +
> +/* device specific registers */
> +#define MAX3134X_CFG2_REG 0x01
> +#define MAX3134X_CFG2_SET_RTC BIT(1)
> +
> +#define MAX31341_TRICKLE_RES_MASK GENMASK(1, 0)
> +#define MAX31341_TRICKLE_DIODE_EN BIT(2)
> +#define MAX31341_TRICKLE_ENABLE_BIT BIT(3)
> +#define MAX31341_POWER_MGMT_REG 0x56
> +#define MAX31341_POWER_MGMT_TRICKLE_BIT BIT(0)
> +
> +#define MAX3133X_TRICKLE_RES_MASK GENMASK(2, 1)
> +#define MAX3133X_TRICKLE_DIODE_EN BIT(3)
> +#define MAX3133X_TRICKLE_ENABLE_BIT BIT(0)
> +
> +#define MAX31329_TRICKLE_ENABLE_BIT BIT(7)
> +#define MAX31343_TRICKLE_ENABLE_MASK GENMASK(7, 4)
> +#define MAX31343_TRICKLE_ENABLE_CODE 5
> +#define MAX31329_43_TRICKLE_RES_MASK GENMASK(1, 0)
> +#define MAX31329_43_TRICKLE_DIODE_EN BIT(2)
> +
> +#define MAX31329_CONFIG2_REG 0x04
> +#define MAX31329_CONFIG2_CLKIN_EN BIT(2)
> +#define MAX31329_CONFIG2_CLKIN_FREQ GENMASK(1, 0)
> +
> +#define MAX31341_42_CONFIG1_REG 0x00
> +#define MAX31341_42_CONFIG1_CLKIN_EN BIT(7)
> +#define MAX31341_42_CONFIG1_CLKIN_FREQ GENMASK(5, 4)
> +#define MAX31341_42_CONFIG1_OSC_DISABLE BIT(3)
> +#define MAX31341_42_CONFIG1_SWRST BIT(0)
> +
> +enum max313xx_ids {
> + ID_MAX31328,
> + ID_MAX31329,
> + ID_MAX31331,
> + ID_MAX31334,
> + ID_MAX31341,
> + ID_MAX31342,
> + ID_MAX31343,
> + MAX313XX_ID_NR
> +};
> +
> +struct clkout_cfg {
> + const int *freq_avail;
> + u8 freq_size;
> + u8 freq_pos;
> + u8 reg;
> + u8 en_bit;
> + bool en_invert;
> +};
> +
> +struct chip_desc {
> + struct clkout_cfg *clkout;
> + const char *clkout_name;
> + u8 sec_reg;
> + u8 alarm1_sec_reg;
> +
> + u8 int_en_reg;
> + u8 int_status_reg;
> +
> + u8 ram_reg;
> + u8 ram_size;
> +
> + u8 temp_reg;
> +
> + u8 trickle_reg;
> +};
> +
> +#define clk_hw_to_max313xx(_hw) container_of(_hw, struct max313xx, clkout)
> +
> +struct max313xx {
> + enum max313xx_ids id;
> + struct regmap *regmap;
> + struct rtc_device *rtc;
> + struct clk_hw clkout;
> + struct clk *clkin;
> + const struct chip_desc *chip;
> + int irqs[2];
> + int irq;
> +};
> +
> +static const int max313xx_clkin_freq[] = { 1, 50, 60, 32768 };
> +
> +static const int max31328_clkout_freq[] = { 1, 1024, 4096, 8192 };
> +static const int max31329_clkout_freq[] = { 1, 4096, 8192, 32768 };
> +static const int max3133x_clkout_freq[] = { 1, 64, 1024, 32768 };
> +static const int max31341_42_clkout_freq[] = { 1, 50, 60, 32768 };
> +static const int max31343_clkout_freq[] = { 1, 2, 4, 8, 16, 32, 64, 128, 32875 };
> +
> +static struct clkout_cfg max31328_clkout = {
> + .freq_avail = max31328_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31328_clkout_freq),
> + .freq_pos = 3,
> + .reg = 0x0E,
> + .en_bit = BIT(3),
> + .en_invert = true,
> +};
> +
> +static struct clkout_cfg max31329_clkout = {
> + .freq_avail = max31329_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31329_clkout_freq),
> + .freq_pos = 5,
> + .reg = 0x04,
> + .en_bit = BIT(7),
> +};
> +
> +static struct clkout_cfg max3133x_clkout = {
> + .freq_avail = max3133x_clkout_freq,
> + .freq_size = ARRAY_SIZE(max3133x_clkout_freq),
> + .freq_pos = 0,
> + .reg = 0x04,
> + .en_bit = BIT(2),
> +};
> +
> +static struct clkout_cfg max31341_42_clkout = {
> + .freq_avail = max31341_42_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31341_42_clkout_freq),
> + .freq_pos = 1,
> + .reg = 0x00,
> + .en_bit = BIT(6),
> + .en_invert = true,
> +};
> +
> +static struct clkout_cfg max31343_clkout = {
> + .freq_avail = max31343_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31343_clkout_freq),
> + .freq_pos = 3,
> + .reg = 0x04,
> + .en_bit = BIT(7),
> +};
> +
> +static const struct chip_desc chip[MAX313XX_ID_NR] = {
> + [ID_MAX31328] = {
> + .int_en_reg = 0x0E,
> + .int_status_reg = 0x0F,
> + .sec_reg = 0x00,
> + .alarm1_sec_reg = 0x07,
> + .temp_reg = 0x11,
> + .clkout = &max31328_clkout,
> + .clkout_name = "max31328-sqw",
> + },
> + [ID_MAX31329] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .ram_reg = 0x22,
> + .ram_size = 64,
> + .trickle_reg = 0x19,
> + .clkout = &max31329_clkout,
> + .clkout_name = "max31329-clkout",
> + },
> + [ID_MAX31331] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x08,
> + .alarm1_sec_reg = 0x0F,
> + .ram_reg = 0x20,
> + .ram_size = 32,
> + .trickle_reg = 0x1B,
> + .clkout = &max3133x_clkout,
> + .clkout_name = "max31331-clkout",
> + },
> + [ID_MAX31334] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x09,
> + .alarm1_sec_reg = 0x10,
> + .ram_reg = 0x30,
> + .ram_size = 32,
> + .trickle_reg = 0x1E,
> + .clkout = &max3133x_clkout,
> + .clkout_name = "max31334-clkout",
> + },
> + [ID_MAX31341] = {
> + .int_en_reg = 0x04,
> + .int_status_reg = 0x05,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .ram_reg = 0x16,
> + .ram_size = 64,
> + .trickle_reg = 0x57,
> + .clkout = &max31341_42_clkout,
> + .clkout_name = "max31341-clkout",
> + },
> + [ID_MAX31342] = {
> + .int_en_reg = 0x04,
> + .int_status_reg = 0x05,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .clkout = &max31341_42_clkout,
> + .clkout_name = "max31342-clkout",
> + },
> + [ID_MAX31343] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .ram_reg = 0x22,
> + .ram_size = 64,
> + .temp_reg = 0x1A,
> + .trickle_reg = 0x19,
> + .clkout = &max31343_clkout,
> + .clkout_name = "max31343-sqw",
> + },
> +};
> +
> +static const u32 max313xx_trickle_ohms[] = { 3000, 6000, 11000 };
> +
> +static bool max313xx_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + const struct chip_desc *chip = rtc->chip;
> +
> + /* time keeping registers */
> + if (reg >= chip->sec_reg && reg < chip->sec_reg + MAX313XX_TIME_SIZE)
> + return true;
> +
> + /* interrupt status register */
> + if (reg == chip->int_status_reg)
> + return true;
> +
> + /* temperature registers */
> + return chip->temp_reg &&
> + (reg == chip->temp_reg || reg == chip->temp_reg + 1);
> +}
> +
> +static const struct regmap_config regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = max313xx_volatile_reg,
> +};
> +
> +static int max313xx_get_hour(u8 hour_reg)
> +{
> + int hour;
> +
> + /* 24Hr mode */
> + if (!FIELD_GET(MAX313XX_HRS_F_12_24, hour_reg))
> + return bcd2bin(hour_reg & 0x3f);
> +
> + /* 12Hr mode */
> + hour = bcd2bin(hour_reg & 0x1f);
> + if (hour == 12)
> + hour = 0;
> +
> + if (FIELD_GET(MAX313XX_HRS_F_AM_PM, hour_reg))
> + hour += 12;
> +
> + return hour;
> +}
> +
> +static int max313xx_read_time(struct device *dev, struct rtc_time *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + u8 regs[7];
> + int ret;
> +
> + ret = regmap_bulk_read(rtc->regmap, rtc->chip->sec_reg, regs, 7);
> + if (ret)
> + return ret;
> +
> + t->tm_sec = bcd2bin(regs[0] & 0x7f);
> + t->tm_min = bcd2bin(regs[1] & 0x7f);
> + t->tm_hour = max313xx_get_hour(regs[2]);
> + t->tm_wday = bcd2bin(regs[3] & 0x07) - 1;
> + t->tm_mday = bcd2bin(regs[4] & 0x3f);
> + t->tm_mon = bcd2bin(regs[5] & 0x1f) - 1;
> + t->tm_year = bcd2bin(regs[6]) + 100;
> +
> + if (FIELD_GET(MAX313XX_MONTH_CENTURY, regs[5]))
> + t->tm_year += 100;
> +
> + return 0;
> +}
> +
> +static int max313xx_set_time(struct device *dev, struct rtc_time *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + u8 regs[7];
> + int ret;
> +
> + regs[0] = bin2bcd(t->tm_sec);
> + regs[1] = bin2bcd(t->tm_min);
> + regs[2] = bin2bcd(t->tm_hour);
> + regs[3] = bin2bcd(t->tm_wday + 1);
> + regs[4] = bin2bcd(t->tm_mday);
> + regs[5] = bin2bcd(t->tm_mon + 1);
> + regs[6] = bin2bcd(t->tm_year % 100);
> +
> + if (t->tm_year >= 200)
> + regs[5] |= FIELD_PREP(MAX313XX_MONTH_CENTURY, 1);
> +
> + /* Clkin needs to be disabled before setting time. */
> + if (rtc->clkin) {
> + switch (rtc->id) {
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_clear_bits(rtc->regmap,
> + MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> + break;
> + default:
> + ret = 0;
> + }
> + if (ret)
> + return ret;
> + }
> +
> + ret = regmap_bulk_write(rtc->regmap, rtc->chip->sec_reg, regs, 7);
> + if (ret)
> + return ret;
> +
> + switch (rtc->id) {
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_set_bits(rtc->regmap, MAX3134X_CFG2_REG,
> + MAX3134X_CFG2_SET_RTC);
> + if (ret)
> + return ret;
> +
> + fsleep(10000);
> +
> + ret = regmap_clear_bits(rtc->regmap, MAX3134X_CFG2_REG,
> + MAX3134X_CFG2_SET_RTC);
> + if (ret)
> + return ret;
> +
> + if (rtc->clkin)
> + ret = regmap_set_bits(rtc->regmap,
> + MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> +
> + break;
> + default:
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static int max313xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + unsigned int status, int_en;
> + struct rtc_time time;
> + u8 regs[6];
> + int ret;
> +
> + ret = regmap_bulk_read(rtc->regmap, rtc->chip->alarm1_sec_reg, regs,
> + sizeof(regs));
> + if (ret)
> + return ret;
> +
> + t->time.tm_sec = bcd2bin(regs[0] & 0x7f);
> + t->time.tm_min = bcd2bin(regs[1] & 0x7f);
> + t->time.tm_hour = bcd2bin(regs[2] & 0x3f);
> + t->time.tm_mday = bcd2bin(regs[3] & 0x3f);
> + t->time.tm_mon = bcd2bin(regs[4] & 0x1f) - 1;
> + t->time.tm_year = bcd2bin(regs[5]) + 100;
> +
> + ret = max313xx_read_time(dev, &time);
> + if (ret)
> + return ret;
> +
> + if (time.tm_year >= 200)
> + t->time.tm_year += 100;
> +
> + ret = regmap_read(rtc->regmap, rtc->chip->int_status_reg, &status);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(rtc->regmap, rtc->chip->int_en_reg, &int_en);
> + if (ret)
> + return ret;
> +
> + t->enabled = FIELD_GET(MAX313XX_INT_ALARM1, int_en);
> + t->pending = FIELD_GET(MAX313XX_INT_ALARM1, status);
> +
> + return 0;
> +}
> +
> +static int max313xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + unsigned int reg;
> + u8 regs[6];
> + int ret;
> +
> + regs[0] = bin2bcd(t->time.tm_sec);
> + regs[1] = bin2bcd(t->time.tm_min);
> + regs[2] = bin2bcd(t->time.tm_hour);
> + regs[3] = bin2bcd(t->time.tm_mday);
> + regs[4] = bin2bcd(t->time.tm_mon + 1);
> + regs[5] = bin2bcd(t->time.tm_year % 100);
> +
> + ret = regmap_bulk_write(rtc->regmap, rtc->chip->alarm1_sec_reg, regs,
> + sizeof(regs));
> + if (ret)
> + return ret;
> +
> + reg = FIELD_PREP(MAX313XX_INT_ALARM1, t->enabled);
> + ret = regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
> + MAX313XX_INT_ALARM1 | MAX313XX_INT_ALARM2,
> + reg);
> + if (ret)
> + return ret;
> +
> + /* Clear status register */
> + return regmap_read(rtc->regmap, rtc->chip->int_status_reg, ®);
> +}
> +
> +static int max313xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> +
> + return regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
> + MAX313XX_INT_ALARM1,
> + FIELD_PREP(MAX313XX_INT_ALARM1, enabled));
> +}
> +
> +static const struct rtc_class_ops max3133x_rtc_ops = {
> + .read_time = max313xx_read_time,
> + .set_time = max313xx_set_time,
> + .read_alarm = max313xx_read_alarm,
> + .set_alarm = max313xx_set_alarm,
> + .alarm_irq_enable = max313xx_alarm_irq_enable,
> +};
> +
> +static irqreturn_t max313xx_irq(int irq, void *dev_id)
> +{
> + struct max313xx *rtc = dev_id;
> + struct mutex *lock = &rtc->rtc->ops_lock;
> + int stat, ret;
> +
> + mutex_lock(lock);
> + ret = regmap_read(rtc->regmap, rtc->chip->int_status_reg, &stat);
> + if (ret)
> + goto out;
> +
> + if (FIELD_GET(MAX313XX_INT_ALARM1, stat)) {
> + ret = regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
> + MAX313XX_INT_ALARM1, 0);
> + if (ret)
> + goto out;
> +
> + rtc_update_irq(rtc->rtc, 1, RTC_AF | RTC_IRQF);
> + }
> +
> +out:
> + mutex_unlock(lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int max313xx_nvmem_reg_read(void *priv, unsigned int offset,
> + void *val, size_t bytes)
> +{
> + struct max313xx *rtc = priv;
> + unsigned int reg = rtc->chip->ram_reg + offset;
> +
> + return regmap_bulk_read(rtc->regmap, reg, val, bytes);
> +}
> +
> +static int max313xx_nvmem_reg_write(void *priv, unsigned int offset,
> + void *val, size_t bytes)
> +{
> + struct max313xx *rtc = priv;
> + unsigned int reg = rtc->chip->ram_reg + offset;
> +
> + return regmap_bulk_write(rtc->regmap, reg, val, bytes);
> +}
> +
> +struct nvmem_config max313xx_nvmem_cfg = {
> + .reg_read = max313xx_nvmem_reg_read,
> + .reg_write = max313xx_nvmem_reg_write,
> + .word_size = 8,
> +};
> +
> +static unsigned long max313xx_clkout_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + const struct clkout_cfg *clkout = rtc->chip->clkout;
> + unsigned int freq_mask;
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(rtc->regmap, clkout->reg, ®);
> + if (ret)
> + return 0;
> +
> + freq_mask = __roundup_pow_of_two(clkout->freq_size) - 1;
> +
> + return clkout->freq_avail[(reg >> clkout->freq_pos) & freq_mask];
> +}
> +
> +static long max313xx_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *prate)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> + int index;
> +
> + index = find_closest(rate, clkout->freq_avail, clkout->freq_size);
> + return clkout->freq_avail[index];
> +}
> +
> +static int max313xx_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> + unsigned int freq_mask;
> + int index;
> +
> + index = find_closest(rate, clkout->freq_avail, clkout->freq_size);
> + freq_mask = __roundup_pow_of_two(clkout->freq_size) - 1;
> +
> + return regmap_update_bits(rtc->regmap, clkout->reg,
> + freq_mask << clkout->freq_pos,
> + index << clkout->freq_pos);
> +}
> +
> +static int max313xx_clkout_enable(struct clk_hw *hw)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> +
> + if (clkout->en_invert)
> + return regmap_clear_bits(rtc->regmap, clkout->reg,
> + clkout->en_bit);
> +
> + return regmap_set_bits(rtc->regmap, clkout->reg, clkout->en_bit);
> +}
> +
> +static void max313xx_clkout_disable(struct clk_hw *hw)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> +
> + switch (rtc->id) {
> + case ID_MAX31331:
> + case ID_MAX31334:
> + if (rtc->irq > 0) {
> + dev_err(rtc->rtc->dev.parent,
> + "clkout cannot be disabled when IRQ is requested");
> + return;
> + }
> + break;
> + default:
> + break;
> + }
> +
> + if (clkout->en_invert)
> + regmap_set_bits(rtc->regmap, clkout->reg, clkout->en_bit);
> + else
> + regmap_clear_bits(rtc->regmap, clkout->reg, clkout->en_bit);
> +}
> +
> +static int max313xx_clkout_is_enabled(struct clk_hw *hw)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(rtc->regmap, clkout->reg, ®);
> + if (ret)
> + return ret;
> +
> + return !!(reg & clkout->en_bit) ^ clkout->en_invert;
> +}
> +
> +static const struct clk_ops max313xx_clkout_ops = {
> + .recalc_rate = max313xx_clkout_recalc_rate,
> + .round_rate = max313xx_clkout_round_rate,
> + .set_rate = max313xx_clkout_set_rate,
> + .enable = max313xx_clkout_enable,
> + .disable = max313xx_clkout_disable,
> + .is_enabled = max313xx_clkout_is_enabled,
> +};
> +
> +struct clk_init_data max313xx_clk_init = {
> + .name = "max313xx-clkout",
> + .ops = &max313xx_clkout_ops,
> +};
> +
> +static int max313xx_read_temp(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + struct chip_desc desc = chip[rtc->id];
> + u8 reg[2];
> + s16 temp;
> + int ret;
> +
> + if (type != hwmon_temp || attr != hwmon_temp_input)
> + return -EOPNOTSUPP;
> +
> + ret = regmap_bulk_read(rtc->regmap, desc.temp_reg, reg, 2);
> + if (ret)
> + return ret;
> +
> + temp = get_unaligned_be16(reg);
> +
> + *val = (temp / 64) * 250;
> +
> + return 0;
> +}
> +
> +static umode_t max313xx_is_visible(const void *data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + if (type == hwmon_temp && attr == hwmon_temp_input)
> + return 0444;
> +
> + return 0;
> +}
> +
> +static const struct hwmon_channel_info *max313xx_info[] = {
> + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
> + NULL
> +};
> +
> +static const struct hwmon_ops max313xx_hwmon_ops = {
> + .is_visible = max313xx_is_visible,
> + .read = max313xx_read_temp,
> +};
> +
> +static const struct hwmon_chip_info max313xx_chip_info = {
> + .ops = &max313xx_hwmon_ops,
> + .info = max313xx_info,
> +};
> +
> +static int max313xx_init(struct max313xx *rtc)
> +{
> + int ret;
> +
> + switch (rtc->id) {
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_clear_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_OSC_DISABLE);
> + if (ret)
> + return ret;
> +
> + return regmap_set_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_SWRST);
> + default:
> + return 0;
> + }
> +}
> +
> +static int max313xx_clkout_register(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + int ret;
> +
> + if (!device_property_present(dev, "#clock-cells"))
> + return 0;
> +
> + max313xx_clk_init.name = rtc->chip->clkout_name;
> + device_property_read_string(dev, "clock-output-names",
> + &max313xx_clk_init.name);
> + rtc->clkout.init = &max313xx_clk_init;
> +
> + ret = devm_clk_hw_register(dev, &rtc->clkout);
> + if (ret)
> + return dev_err_probe(dev, ret, "cannot register clock\n");
> +
> + return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
> + rtc->clkout.clk);
> +}
> +
> +static int max313xx_trickle_charger_setup(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool diode_disable;
> + int index, reg;
> + u32 ohms = 0;
> + int ret;
> +
> + device_property_read_u32(dev, "trickle-resistor-ohms", &ohms);
> + if (!ohms)
> + return 0;
> +
> + diode_disable = device_property_read_bool(dev, "trickle-diode-disable");
> +
> + if (!rtc->chip->trickle_reg) {
> + dev_warn(dev, "device does not have trickle charger\n");
> + return 0;
> + }
> +
> + index = find_closest(ohms, max313xx_trickle_ohms,
> + ARRAY_SIZE(max313xx_trickle_ohms)) + 1;
> +
> + switch (rtc->id) {
> + case ID_MAX31329:
> + reg = FIELD_PREP(MAX31329_TRICKLE_ENABLE_BIT, 1) |
> + FIELD_PREP(MAX31329_43_TRICKLE_RES_MASK, index) |
> + FIELD_PREP(MAX31329_43_TRICKLE_DIODE_EN, !diode_disable);
> + break;
> + case ID_MAX31331:
> + case ID_MAX31334:
> + reg = FIELD_PREP(MAX3133X_TRICKLE_ENABLE_BIT, 1) |
> + FIELD_PREP(MAX3133X_TRICKLE_DIODE_EN, !diode_disable) |
> + FIELD_PREP(MAX3133X_TRICKLE_RES_MASK, index);
> + break;
> + case ID_MAX31341:
> + if (index == 1)
> + index = 0;
> + reg = FIELD_PREP(MAX31341_TRICKLE_ENABLE_BIT, 1) |
> + FIELD_PREP(MAX31341_TRICKLE_DIODE_EN, !diode_disable) |
> + FIELD_PREP(MAX31341_TRICKLE_RES_MASK, index);
> +
> + ret = regmap_set_bits(rtc->regmap, MAX31341_POWER_MGMT_REG,
> + MAX31341_POWER_MGMT_TRICKLE_BIT);
> + if (ret)
> + return ret;
> +
> + break;
> + case ID_MAX31343:
> + reg = FIELD_PREP(MAX31329_43_TRICKLE_RES_MASK, index) |
> + FIELD_PREP(MAX31329_43_TRICKLE_DIODE_EN, !diode_disable) |
> + FIELD_PREP(MAX31343_TRICKLE_ENABLE_MASK,
> + MAX31343_TRICKLE_ENABLE_CODE);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return regmap_write(rtc->regmap, rtc->chip->trickle_reg, reg);
> +}
> +
> +static int max313xx_find_clkin_freq_index(struct clk *clk)
> +{
> + unsigned long rate = clk_get_rate(clk);
> + int freq;
> + int i;
> +
> + i = find_closest(rate, max313xx_clkin_freq,
> + ARRAY_SIZE(max313xx_clkin_freq));
> + if (max313xx_clkin_freq[i] == rate)
> + return i;
> +
> + for (i = ARRAY_SIZE(max313xx_clkin_freq) - 1; i >= 0; i--) {
> + freq = max313xx_clkin_freq[i];
> + if (freq == clk_round_rate(clk, freq))
> + return i;
> + }
> +
> + /* supplied clock cannot produce one of desired frequency rate */
> + return -ENODEV;
> +}
> +
> +static int max313xx_clkin_init(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + int rate;
> + int ret;
> +
> + rtc->clkin = devm_clk_get_enabled(dev, NULL);
> + if (IS_ERR(rtc->clkin)) {
> + if (PTR_ERR(rtc->clkin) == -ENOENT)
> + rtc->clkin = NULL;
> + else
> + return dev_err_probe(dev, PTR_ERR(rtc->clkin),
> + "error while clkin setup\n");
> + }
> +
> + if (!rtc->clkin) {
> + switch (rtc->id) {
> + case ID_MAX31329:
> + return regmap_clear_bits(rtc->regmap,
> + MAX31329_CONFIG2_REG,
> + MAX31329_CONFIG2_CLKIN_EN);
> + case ID_MAX31341:
> + case ID_MAX31342:
> + return regmap_clear_bits(rtc->regmap,
> + MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> + default:
> + return 0;
> + }
> + }
> +
> + rate = max313xx_find_clkin_freq_index(rtc->clkin);
> + if (rate < 0)
> + return dev_err_probe(dev, rate,
> + "clkin cannot produce required frequency\n");
> +
> + ret = clk_set_rate(rtc->clkin, max313xx_clkin_freq[rate]);
> + if (ret)
> + return ret;
> +
> + switch (rtc->id) {
> + case ID_MAX31329:
> + ret = regmap_update_bits(rtc->regmap, MAX31329_CONFIG2_REG,
> + MAX31329_CONFIG2_CLKIN_FREQ, rate);
> + if (ret)
> + return ret;
> +
> + return regmap_set_bits(rtc->regmap, MAX31329_CONFIG2_REG,
> + MAX31329_CONFIG2_CLKIN_EN);
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_update_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_FREQ,
> + FIELD_PREP(MAX31341_42_CONFIG1_CLKIN_FREQ, rate));
> + if (ret)
> + return ret;
> +
> + return regmap_set_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> + default:
> + rtc->clkin = NULL;
> + dev_warn(dev, "device does not have clock input\n");
> + return 0;
> + }
> +}
> +
> +static int max313xx_irq_init(struct device *dev, const char *devname)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool wakeup;
> + int ret;
> +
> + rtc->irq = rtc->irqs[0];
> +
> + switch (rtc->id) {
> + case ID_MAX31328:
> + /* max31328 sqw ant int pin is shared */
> + if (rtc->id == ID_MAX31328 && rtc->irq > 0 && rtc->clkout.clk)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "cannot have both sqw clock output and irq enabled");
> +
> + break;
> + case ID_MAX31331:
> + case ID_MAX31334:
> + if (rtc->clkout.clk) {
> + /* clockout needs to be enabled for using INTA pin */
> + ret = clk_prepare_enable(rtc->clkout.clk);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "cannot enable clkout\n");
> + } else {
> + rtc->irq = rtc->irqs[1];
> + }
> + break;
> + default:
> + if (rtc->clkin) {
> + rtc->irq = rtc->irqs[1];
> +
> + /* wrong interrupt specified */
> + if (rtc->irqs[0] > 0 && rtc->irqs[1] <= 0)
> + dev_warn(dev, "INTA is specified but INTB required for irq when clkin is enabled\n");
> +
> + if (rtc->clkout.clk && rtc->irq > 0)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "irq not possible when both clkin and clkout are configured\n");
> +
> + if (rtc->irq <= 0)
> + break;
> +
> + /* clkout needs to be disabled for using INTB pin */
> + if (rtc->chip->clkout->en_invert)
> + ret = regmap_set_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> + else
> + ret = regmap_clear_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> +
> + if (ret)
> + return ret;
> + }
> + break;
> + }
> +
> + if (rtc->irq > 0) {
> + ret = devm_request_threaded_irq(dev, rtc->irq, NULL,
> + &max313xx_irq, IRQF_ONESHOT,
> + devname, rtc);
> + if (ret)
> + return ret;
> +
> + wakeup = device_property_read_bool(dev, "wakeup-source");
> + return device_init_wakeup(dev, wakeup);
> + }
> +
> + __clear_bit(RTC_FEATURE_ALARM, rtc->rtc->features);
> +
> + return 0;
> +}
> +
> +static int max313xx_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct max313xx *max313xx;
> + struct device *hwmon;
> + const void *match;
> + int ret;
> +
> + max313xx = devm_kzalloc(&client->dev, sizeof(*max313xx), GFP_KERNEL);
> + if (!max313xx)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&client->dev, max313xx);
> +
> + max313xx->regmap = devm_regmap_init_i2c(client, ®map_config);
> + if (IS_ERR(max313xx->regmap)) {
> + return dev_err_probe(dev, PTR_ERR(max313xx->regmap),
> + "regmap init failed\n");
> + }
> +
> + i2c_set_clientdata(client, max313xx);
> +
> + match = device_get_match_data(dev);
> + if (match)
> + max313xx->id = (enum max313xx_ids)match;
> + else if (id)
> + max313xx->id = id->driver_data;
> + else
> + return -ENODEV;
> +
> + max313xx->chip = &chip[max313xx->id];
> +
> + ret = max313xx_init(max313xx);
> + if (ret)
> + return ret;
> +
> + max313xx->rtc = devm_rtc_allocate_device(dev);
> + if (IS_ERR(max313xx->rtc))
> + return PTR_ERR(max313xx->rtc);
> +
> + max313xx->rtc->ops = &max3133x_rtc_ops;
> + max313xx->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
> + max313xx->rtc->range_max = RTC_TIMESTAMP_END_2199;
> +
> + ret = devm_rtc_register_device(max313xx->rtc);
> + if (ret)
> + return ret;
> +
> + switch (max313xx->id) {
> + case ID_MAX31328:
> + case ID_MAX31343:
> + max313xx->irqs[0] = client->irq;
> + break;
> + default:
> + max313xx->irqs[0] = fwnode_irq_get_byname(dev_fwnode(dev), "INTA");
> + max313xx->irqs[1] = fwnode_irq_get_byname(dev_fwnode(dev), "INTB");
> + if (max313xx->irqs[0] <= 0 && max313xx->irqs[1] <= 0 && client->irq)
> + return dev_err_probe(dev, -ENOENT,
> + "interrupt requested but no interrupt name specified\n");
> +
> + break;
> + }
> +
> + ret = max313xx_clkout_register(dev);
> + if (ret)
> + return ret;
> +
> + ret = max313xx_clkin_init(dev);
> + if (ret)
> + return ret;
> +
> + /* IRQ wiring depends on the clock configuration so parse them first */
> + ret = max313xx_irq_init(dev, client->name);
> + if (ret)
> + return ret;
> +
> + if (max313xx->chip->ram_size) {
> + max313xx_nvmem_cfg.size = max313xx->chip->ram_size;
> + max313xx_nvmem_cfg.priv = max313xx;
> +
> + ret = devm_rtc_nvmem_register(max313xx->rtc, &max313xx_nvmem_cfg);
> + if (ret)
> + dev_warn(dev, "cannot register rtc nvmem\n");
> + }
> +
> + if (max313xx->chip->temp_reg) {
> + hwmon = devm_hwmon_device_register_with_info(dev, client->name,
> + max313xx,
> + &max313xx_chip_info,
> + NULL);
> + if (IS_ERR(hwmon))
> + dev_warn(dev, "cannot register hwmon device: %li\n",
> + PTR_ERR(hwmon));
> + }
> +
> + return max313xx_trickle_charger_setup(dev);
> +}
> +
> +static const struct of_device_id max313xx_of_id[] = {
> + { .compatible = "adi,max31328", .data = (void *)ID_MAX31328 },
> + { .compatible = "adi,max31329", .data = (void *)ID_MAX31329 },
> + { .compatible = "adi,max31331", .data = (void *)ID_MAX31331 },
> + { .compatible = "adi,max31334", .data = (void *)ID_MAX31334 },
> + { .compatible = "adi,max31341", .data = (void *)ID_MAX31341 },
> + { .compatible = "adi,max31342", .data = (void *)ID_MAX31342 },
> + { .compatible = "adi,max31343", .data = (void *)ID_MAX31343 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, max313xx_of_id);
> +
> +static const struct i2c_device_id max313xx_id[] = {
> + { "max31328", ID_MAX31328 },
> + { "max31329", ID_MAX31329 },
> + { "max31331", ID_MAX31331 },
> + { "max31334", ID_MAX31334 },
> + { "max31341", ID_MAX31341 },
> + { "max31342", ID_MAX31342 },
> + { "max31343", ID_MAX31343 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, max313xx_id);
> +
> +static struct i2c_driver max313xx_driver = {
> + .driver = {
> + .name = "rtc-max313xx",
> + .of_match_table = max313xx_of_id,
> + },
> + .probe = max313xx_probe,
> + .id_table = max313xx_id,
> +};
> +module_i2c_driver(max313xx_driver);
> +
> +MODULE_DESCRIPTION("Analog Devices MAX313XX RTCs");
> +MODULE_AUTHOR("Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>");
> +MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@analog.com>");
> +MODULE_SOFTDEP("pre: regmap-i2c");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION("1.0");
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2022-11-08 12:22 ` [PATCH v3 1/2] " Ibrahim Tilki
2022-11-08 12:57 ` Christophe JAILLET
2022-11-08 13:27 ` Guenter Roeck
@ 2022-11-09 10:38 ` kernel test robot
2022-12-10 22:01 ` Alexandre Belloni
2023-02-14 20:28 ` Chris Packham
4 siblings, 0 replies; 15+ messages in thread
From: kernel test robot @ 2022-11-09 10:38 UTC (permalink / raw)
To: Ibrahim Tilki, a.zummo, alexandre.belloni, jdelvare, linux,
robh+dt, krzysztof.kozlowski+dt
Cc: oe-kbuild-all, Ibrahim Tilki, linux-rtc, linux-kernel,
linux-hwmon, devicetree, Zeynep Arslanbenzer
[-- Attachment #1: Type: text/plain, Size: 2038 bytes --]
Hi Ibrahim,
I love your patch! Yet something to improve:
[auto build test ERROR on abelloni/rtc-next]
[also build test ERROR on linus/master v6.1-rc4 next-20221109]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Ibrahim-Tilki/drivers-rtc-add-max313xx-series-rtc-driver/20221108-202601
base: https://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git rtc-next
patch link: https://lore.kernel.org/r/20221108122254.1185-2-Ibrahim.Tilki%40analog.com
patch subject: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
config: parisc-randconfig-s051-20221109
compiler: hppa-linux-gcc (GCC) 12.1.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-39-gce1a6720-dirty
# https://github.com/intel-lab-lkp/linux/commit/bc04441ea4cc7b244fa48ab2ca132e751e06ad8a
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Ibrahim-Tilki/drivers-rtc-add-max313xx-series-rtc-driver/20221108-202601
git checkout bc04441ea4cc7b244fa48ab2ca132e751e06ad8a
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=parisc SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
hppa-linux-ld: drivers/rtc/rtc-max313xx.o: in function `.LC196':
>> rtc-max313xx.c:(.rodata.cst4+0xe8): undefined reference to `devm_hwmon_device_register_with_info'
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 115813 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/parisc 6.1.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="hppa-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_LEGACY_TIMER_TICK=y
CONFIG_TIME_KUNIT_TEST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
CONFIG_BPF=y
#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem
CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
# CONFIG_CPU_ISOLATION is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
# CONFIG_FORCE_TASKS_RUDE_RCU is not set
CONFIG_TASKS_RUDE_RCU=y
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
CONFIG_BOOT_CONFIG_EMBED=y
CONFIG_BOOT_CONFIG_EMBED_FILE=""
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYSCTL_ARCH_UNALIGN_ALLOW=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
# CONFIG_POSIX_TIMERS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_PARISC=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_LOW_RES=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_PGTABLE_LEVELS=2
#
# Processor type and features
#
# CONFIG_PA7000 is not set
# CONFIG_PA7100LC is not set
# CONFIG_PA7200 is not set
# CONFIG_PA7300LC is not set
CONFIG_PA8X00=y
CONFIG_PA20=y
CONFIG_PREFETCH=y
CONFIG_PARISC_HUGE_KERNEL=y
CONFIG_MLONGCALLS=y
# CONFIG_64BIT is not set
CONFIG_PARISC_PAGE_SIZE_4KB=y
CONFIG_SMP=y
# CONFIG_SCHED_MC is not set
CONFIG_IRQSTACKS=y
CONFIG_TLB_PTLOCK=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_AUDIT_ARCH=y
CONFIG_NR_CPUS=16
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
# end of Processor type and features
#
# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
#
CONFIG_GSC=y
# CONFIG_HPPB is not set
# CONFIG_IOMMU_CCIO is not set
CONFIG_GSC_LASI=y
# CONFIG_GSC_WAX is not set
# CONFIG_ISA is not set
# end of Bus options (PCI, PCMCIA, EISA, GSC, ISA)
#
# PA-RISC specific drivers
#
# CONFIG_CHASSIS_LCD_LED is not set
# CONFIG_PDC_CHASSIS is not set
CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
# end of PA-RISC specific drivers
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC_ELF=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
# CONFIG_SECCOMP is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ALTERNATE_USER_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_HAVE_ARCH_HASH=y
CONFIG_CLONE_BACKWARDS=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_CPU_NO_EFFICIENT_FFS=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
# CONFIG_LOCK_EVENT_COUNTS is not set
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# end of GCOV-based kernel profiling
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
# CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLK_MQ_VIRTIO=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
# end of IO Schedulers
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
#
# Executable file formats
#
# CONFIG_BINFMT_ELF is not set
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
# CONFIG_SWAP is not set
#
# SLAB allocator options
#
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_DEBUGFS=y
# CONFIG_CMA_SYSFS is not set
CONFIG_CMA_AREAS=7
CONFIG_STACK_MAX_DEFAULT_SIZE_MB=100
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# CONFIG_ANON_VMA_NAME is not set
# CONFIG_USERFAULTFD is not set
# CONFIG_LRU_GEN is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE_MRP=y
# CONFIG_BRIDGE_CFM is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
CONFIG_LAPB=y
CONFIG_PHONET=y
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFB=y
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
CONFIG_NET_SCH_CBS=y
CONFIG_NET_SCH_ETF=y
CONFIG_NET_SCH_TAPRIO=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
# CONFIG_NET_SCH_MQPRIO is not set
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_CODEL=y
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=y
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
CONFIG_DEFAULT_PFIFO_FAST=y
CONFIG_DEFAULT_NET_SCH="pfifo_fast"
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=y
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
# CONFIG_NET_ACT_MPLS is not set
CONFIG_NET_ACT_VLAN=y
# CONFIG_NET_ACT_BPF is not set
CONFIG_NET_ACT_SKBMOD=y
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=y
CONFIG_NET_ACT_GATE=y
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_TRACING is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_QRTR=y
CONFIG_QRTR_SMD=y
CONFIG_QRTR_TUN=y
CONFIG_QRTR_MHI=y
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=y
# CONFIG_CAN_J1939 is not set
CONFIG_CAN_ISOTP=y
CONFIG_BT=y
CONFIG_BT_BREDR=y
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
# CONFIG_BT_HS is not set
# CONFIG_BT_LE is not set
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_FEATURE_DEBUG=y
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=y
CONFIG_BT_BCM=y
CONFIG_BT_QCA=y
CONFIG_BT_MTK=y
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_LL is not set
# CONFIG_BT_HCIUART_3WIRE is not set
# CONFIG_BT_HCIUART_INTEL is not set
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
# CONFIG_BT_HCIUART_MRVL is not set
CONFIG_BT_HCIVHCI=y
# CONFIG_BT_MRVL is not set
CONFIG_BT_MTKSDIO=y
CONFIG_BT_MTKUART=y
# CONFIG_BT_QCOMSMD is not set
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers
# CONFIG_MCTP is not set
# CONFIG_WIRELESS is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_GPIO=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_UART=y
# CONFIG_NFC_HCI is not set
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_VIRTUAL_NCI=y
# CONFIG_NFC_FDP is not set
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_I2C=y
CONFIG_NFC_PN532_UART=y
CONFIG_NFC_MRVL=y
CONFIG_NFC_MRVL_UART=y
CONFIG_NFC_MRVL_I2C=y
CONFIG_NFC_ST_NCI=y
CONFIG_NFC_ST_NCI_I2C=y
# CONFIG_NFC_NXP_NCI is not set
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
CONFIG_NFC_S3FWRN82_UART=y
# end of Near Field Communication (NFC) devices
# CONFIG_PSAMPLE is not set
CONFIG_NET_IFE=y
# CONFIG_LWTUNNEL is not set
CONFIG_GRO_CELLS=y
CONFIG_FAILOVER=y
# CONFIG_ETHTOOL_NETLINK is not set
CONFIG_NETDEV_ADDR_LIST_TEST=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
CONFIG_EISA=y
# CONFIG_EISA_NAMES is not set
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
# CONFIG_PCCARD is not set
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_UPLOAD=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_EP=y
# end of Bus devices
# CONFIG_CONNECTOR is not set
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol
CONFIG_ARM_SCPI_POWER_DOMAIN=y
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_BCM47XX_NVRAM is not set
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=y
# CONFIG_GOOGLE_MEMCONSOLE_COREBOOT is not set
CONFIG_GOOGLE_VPD=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
# CONFIG_GNSS_UBX_SERIAL is not set
CONFIG_MTD=y
#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
# CONFIG_MTD_BCM63XX_PARTS is not set
# CONFIG_MTD_BRCM_U_BOOT is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_PARSER_IMAGETAG is not set
# CONFIG_MTD_PARSER_TRX is not set
# CONFIG_MTD_SHARPSL_PARTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=y
CONFIG_NFTL=y
# CONFIG_NFTL_RW is not set
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_SM_FTL=y
# CONFIG_MTD_OOPS is not set
CONFIG_MTD_PARTITIONED_MASTER=y
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
CONFIG_MTD_SPEAR_SMI=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers
#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_MTD_ONENAND_SAMSUNG is not set
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_RAW_NAND=y
#
# Raw/parallel NAND flash controllers
#
# CONFIG_MTD_NAND_DENALI_DT is not set
CONFIG_MTD_NAND_AMS_DELTA=y
# CONFIG_MTD_NAND_SHARPSL is not set
# CONFIG_MTD_NAND_ATMEL is not set
# CONFIG_MTD_NAND_MARVELL is not set
# CONFIG_MTD_NAND_SLC_LPC32XX is not set
# CONFIG_MTD_NAND_MLC_LPC32XX is not set
# CONFIG_MTD_NAND_BRCMNAND is not set
# CONFIG_MTD_NAND_OXNAS is not set
# CONFIG_MTD_NAND_FSL_IFC is not set
# CONFIG_MTD_NAND_VF610_NFC is not set
# CONFIG_MTD_NAND_MXC is not set
# CONFIG_MTD_NAND_SH_FLCTL is not set
# CONFIG_MTD_NAND_DAVINCI is not set
# CONFIG_MTD_NAND_TXX9NDFMC is not set
# CONFIG_MTD_NAND_FSMC is not set
# CONFIG_MTD_NAND_SUNXI is not set
# CONFIG_MTD_NAND_HISI504 is not set
# CONFIG_MTD_NAND_QCOM is not set
CONFIG_MTD_NAND_MXIC=y
# CONFIG_MTD_NAND_TEGRA is not set
# CONFIG_MTD_NAND_STM32_FMC2 is not set
# CONFIG_MTD_NAND_MESON is not set
CONFIG_MTD_NAND_GPIO=y
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_CADENCE is not set
# CONFIG_MTD_NAND_ARASAN is not set
# CONFIG_MTD_NAND_INTEL_LGM is not set
# CONFIG_MTD_NAND_RENESAS is not set
#
# Misc
#
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH is not set
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
CONFIG_MTD_NAND_ECC_SW_BCH=y
# CONFIG_MTD_NAND_ECC_MXIC is not set
# CONFIG_MTD_NAND_ECC_MEDIATEK is not set
# end of ECC engine support
# end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
CONFIG_MTD_UBI_GLUEBI=y
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_MTD_HYPERBUS is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
CONFIG_PARPORT_GSC=y
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
# CONFIG_BLK_DEV is not set
#
# NVME Support
#
CONFIG_NVME_COMMON=y
CONFIG_NVME_CORE=y
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
CONFIG_NVME_AUTH=y
# CONFIG_NVME_TARGET is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_DUMMY_IRQ is not set
CONFIG_ICS932S401=y
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_QCOM_COINCELL is not set
# CONFIG_QCOM_FASTRPC is not set
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
CONFIG_SRAM=y
CONFIG_XILINX_SDFEC=y
# CONFIG_OPEN_DICE is not set
CONFIG_VCPU_STALL_DETECTOR=y
CONFIG_C2PORT=y
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline
# CONFIG_ALTERA_STAPL is not set
CONFIG_ECHO=y
# CONFIG_UACCE is not set
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=y
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_SG is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_ENCLOSURE is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_AHA1740 is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
CONFIG_SCSI_SIM710=y
CONFIG_SCSI_DEBUG=y
# CONFIG_SCSI_VIRTIO is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=y
# CONFIG_SCSI_DH_ALUA is not set
# end of SCSI device support
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# end of IEEE 1394 (FireWire) support
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=y
CONFIG_MACSEC=y
# CONFIG_NETCONSOLE is not set
CONFIG_TUN_VNET_CROSS_LE=y
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
CONFIG_NLMON=y
CONFIG_MHI_NET=y
# CONFIG_ETHERNET is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
# CONFIG_PHYLIB is not set
CONFIG_PSE_CONTROLLER=y
CONFIG_PSE_REGULATOR=y
# CONFIG_CAN_DEV is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_SUN4I is not set
# CONFIG_MDIO_XGENE is not set
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_BCM_UNIMAC is not set
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_MSCC_MIIM=y
# CONFIG_MDIO_MOXART is not set
# CONFIG_MDIO_OCTEON is not set
#
# MDIO Multiplexers
#
#
# PCS device drivers
#
# CONFIG_PCS_RZN1_MIIC is not set
# end of PCS device drivers
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=y
CONFIG_SLHC=y
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y
#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_WLAN is not set
# CONFIG_WAN is not set
#
# Wireless WAN
#
CONFIG_WWAN=y
# CONFIG_WWAN_DEBUGFS is not set
CONFIG_WWAN_HWSIM=y
# CONFIG_MHI_WWAN_CTRL is not set
# CONFIG_MHI_WWAN_MBIM is not set
# CONFIG_QCOM_BAM_DMUX is not set
CONFIG_RPMSG_WWAN_CTRL=y
# end of Wireless WAN
# CONFIG_NET_FAILOVER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LDISC_AUTOLOAD is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_GSC=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set
# CONFIG_SERIAL_8250_IOC3 is not set
CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SERIAL_8250_OMAP is not set
# CONFIG_SERIAL_8250_LPC18XX is not set
# CONFIG_SERIAL_8250_MT6577 is not set
# CONFIG_SERIAL_8250_UNIPHIER is not set
# CONFIG_SERIAL_8250_INGENIC is not set
# CONFIG_SERIAL_8250_PXA is not set
CONFIG_SERIAL_8250_TEGRA=y
# CONFIG_SERIAL_8250_BCM7271 is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_ATMEL is not set
# CONFIG_SERIAL_MESON is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_SAMSUNG is not set
# CONFIG_SERIAL_TEGRA is not set
# CONFIG_SERIAL_IMX is not set
# CONFIG_SERIAL_IMX_EARLYCON is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_MUX=y
# CONFIG_SERIAL_MUX_CONSOLE is not set
# CONFIG_SERIAL_SH_SCI is not set
# CONFIG_SERIAL_HS_LPC32XX is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_MSM is not set
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set
CONFIG_SERIAL_SIFIVE=y
# CONFIG_SERIAL_SIFIVE_CONSOLE is not set
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_BCM63XX is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
# CONFIG_SERIAL_MXS_AUART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_MPS2_UART is not set
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
CONFIG_SERIAL_SPRD=y
# CONFIG_SERIAL_SPRD_CONSOLE is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_MVEBU_UART is not set
# CONFIG_SERIAL_OWL is not set
# CONFIG_SERIAL_RDA is not set
# CONFIG_SERIAL_MILBEAUT_USIO is not set
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_LITEUART_CONSOLE=y
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_N_GSM=y
CONFIG_NULL_TTY=y
CONFIG_HVC_DRIVER=y
CONFIG_RPMSG_TTY=y
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_DEVMEM is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C=y
# CONFIG_TCG_TIS_SYNQUACER is not set
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
# CONFIG_XILLYBUS_OF is not set
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
# CONFIG_I2C_MUX_LTC4306 is not set
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms
#
# I2C Hardware Bus support
#
# CONFIG_I2C_HIX5HD2 is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_ALTERA is not set
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
CONFIG_I2C_BRCMSTB=y
# CONFIG_I2C_CADENCE is not set
CONFIG_I2C_CBUS_GPIO=y
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DIGICOLOR is not set
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_EXYNOS5 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_SPRD is not set
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_WMT is not set
CONFIG_I2C_XILINX=y
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=y
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
# CONFIG_HSI_CHAR is not set
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_PARPORT=y
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_ASPEED is not set
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BCM_XGS_IPROC is not set
# CONFIG_GPIO_BRCMSTB is not set
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_CLPS711X is not set
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EIC_SPRD is not set
# CONFIG_GPIO_EM is not set
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_IOP is not set
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
# CONFIG_GPIO_SIFIVE is not set
# CONFIG_GPIO_SIOX is not set
# CONFIG_GPIO_SNPS_CREG is not set
# CONFIG_GPIO_SPRD is not set
# CONFIG_GPIO_STP_XWAY is not set
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
# CONFIG_GPIO_TS4800 is not set
# CONFIG_GPIO_UNIPHIER is not set
# CONFIG_GPIO_VISCONTI is not set
# CONFIG_GPIO_XGENE_SB is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_XLP is not set
CONFIG_GPIO_AMD_FCH=y
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADNP is not set
CONFIG_GPIO_GW_PLD=y
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# CONFIG_GPIO_ADP5520 is not set
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_BD71815=y
CONFIG_GPIO_BD71828=y
# CONFIG_GPIO_BD9571MWV is not set
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_RC5T583=y
# CONFIG_GPIO_SL28CPLD is not set
CONFIG_GPIO_STMPE=y
# CONFIG_GPIO_TC3589X is not set
CONFIG_GPIO_TPS65086=y
# CONFIG_GPIO_TPS65218 is not set
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=y
# CONFIG_GPIO_TQMX86 is not set
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_WM8350=y
# CONFIG_GPIO_WM8994 is not set
# end of MFD GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_MXC is not set
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2805 is not set
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2438=y
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
# CONFIG_W1_SLAVE_DS2781 is not set
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_IP5XXX_POWER is not set
CONFIG_MAX8925_POWER=y
# CONFIG_WM8350_POWER is not set
# CONFIG_TEST_POWER is not set
CONFIG_CHARGER_ADP5061=y
# CONFIG_BATTERY_ACT8945A is not set
# CONFIG_BATTERY_CW2015 is not set
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_LEGO_EV3 is not set
CONFIG_BATTERY_SAMSUNG_SDI=y
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
# CONFIG_BATTERY_BQ27XXX_HDQ is not set
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
CONFIG_BATTERY_DA9030=y
CONFIG_CHARGER_DA9150=y
# CONFIG_BATTERY_DA9150 is not set
CONFIG_CHARGER_AXP20X=y
CONFIG_BATTERY_AXP20X=y
# CONFIG_AXP20X_POWER is not set
CONFIG_BATTERY_MAX17040=y
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_BATTERY_MAX1721X=y
# CONFIG_CHARGER_PCF50633 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_LTC4162L=y
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX77976=y
# CONFIG_CHARGER_MAX8997 is not set
CONFIG_CHARGER_MAX8998=y
CONFIG_CHARGER_MP2629=y
CONFIG_CHARGER_MT6360=y
# CONFIG_CHARGER_MT6370 is not set
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=y
# CONFIG_CHARGER_BQ256XX is not set
CONFIG_CHARGER_SMB347=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
# CONFIG_CHARGER_SC2731 is not set
# CONFIG_FUEL_GAUGE_SC27XX is not set
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD99954=y
# CONFIG_BATTERY_UG3105 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_SOC=y
# CONFIG_BCMA_DRIVER_MIPS is not set
CONFIG_BCMA_SFLASH=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
# CONFIG_MFD_SUN4I_GPADC is not set
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_AT91_USART is not set
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
# CONFIG_MFD_BCM590XX is not set
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_ASIC3 is not set
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=y
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
CONFIG_MFD_HI6421_PMIC=y
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
CONFIG_MFD_IQS62X=y
# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=y
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77714=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6370=y
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
CONFIG_MFD_NTXEC=y
# CONFIG_MFD_RETU is not set
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=y
# CONFIG_MFD_PM8XXX is not set
CONFIG_MFD_SY7636A=y
CONFIG_MFD_RT4831=y
CONFIG_MFD_RT5033=y
CONFIG_MFD_RT5120=y
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SIMPLE_MFD_I2C=y
# CONFIG_MFD_SL28CPLD is not set
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=y
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
# end of STMicroelectronics STMPE Interface Drivers
# CONFIG_MFD_SUN6I_PRCM is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_TI_LMU=y
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TI_LP873X=y
# CONFIG_MFD_TI_LP87565 is not set
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_LOCHNAGAR is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_CS47L24=y
# CONFIG_MFD_WM5102 is not set
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
# CONFIG_MFD_STW481X is not set
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
# CONFIG_MFD_WCD934X is not set
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
CONFIG_MFD_QCOM_PM8008=y
CONFIG_RAVE_SP_CORE=y
CONFIG_MFD_RSMU_I2C=y
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
# CONFIG_REGULATOR_88PM800 is not set
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_ATC260X=y
# CONFIG_REGULATOR_AXP20X is not set
CONFIG_REGULATOR_BD71815=y
CONFIG_REGULATOR_BD71828=y
CONFIG_REGULATOR_BD718XX=y
CONFIG_REGULATOR_BD9571MWV=y
CONFIG_REGULATOR_BD957XMUF=y
CONFIG_REGULATOR_DA903X=y
# CONFIG_REGULATOR_DA9062 is not set
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FAN53880=y
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LM363X is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX77650 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX77686 is not set
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
# CONFIG_REGULATOR_MCP16502 is not set
CONFIG_REGULATOR_MP5416=y
# CONFIG_REGULATOR_MP8859 is not set
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=y
# CONFIG_REGULATOR_MT6311 is not set
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6370=y
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_QCOM_RPMH is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT4831=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_RT5120=y
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=y
CONFIG_REGULATOR_RT6160=y
CONFIG_REGULATOR_RT6245=y
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=y
# CONFIG_REGULATOR_S2MPA01 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_SC2731 is not set
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=y
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
CONFIG_REGULATOR_STPMIC1=y
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
# CONFIG_REGULATOR_SY7636A is not set
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6286X=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS65910=y
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TPS68470 is not set
# CONFIG_REGULATOR_UNIPHIER is not set
# CONFIG_REGULATOR_VCTRL is not set
CONFIG_REGULATOR_WM8350=y
# CONFIG_REGULATOR_WM8400 is not set
# CONFIG_REGULATOR_WM8994 is not set
# CONFIG_REGULATOR_QCOM_LABIBB is not set
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=y
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
#
# Media device types
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
# end of Video4Linux options
#
# Media controller options
#
# end of Media controller options
#
# Media drivers
#
#
# Drivers filtered as selected at 'Filter media drivers'
#
#
# Media drivers
#
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SAA7706H=y
CONFIG_RADIO_SI4713=y
# CONFIG_RADIO_TEA5764 is not set
CONFIG_RADIO_TEF6862=y
CONFIG_RADIO_WL1273=y
# CONFIG_RADIO_SI470X is not set
CONFIG_PLATFORM_SI4713=y
CONFIG_I2C_SI4713=y
CONFIG_RADIO_WL128X=y
# CONFIG_V4L_RADIO_ISA_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# end of Media drivers
#
# Media ancillary drivers
#
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_CS3308 is not set
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_SONY_BTF_MPX=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TEA6415C=y
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_VP27SMPX is not set
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_WM8775=y
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
# end of RDS decoders
#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
# CONFIG_VIDEO_ADV7183 is not set
CONFIG_VIDEO_ADV748X=y
CONFIG_VIDEO_ADV7604=y
# CONFIG_VIDEO_ADV7604_CEC is not set
CONFIG_VIDEO_ADV7842=y
# CONFIG_VIDEO_ADV7842_CEC is not set
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
CONFIG_VIDEO_ISL7998X=y
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_MAX9286=y
CONFIG_VIDEO_ML86V7667=y
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
CONFIG_VIDEO_TC358743=y
# CONFIG_VIDEO_TC358743_CEC is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
CONFIG_VIDEO_TW9906=y
# CONFIG_VIDEO_TW9910 is not set
CONFIG_VIDEO_VPX3220=y
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_CX25840=y
# end of Video decoders
#
# Video encoders
#
CONFIG_VIDEO_AD9389B=y
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
CONFIG_VIDEO_ADV7393=y
# CONFIG_VIDEO_ADV7511 is not set
CONFIG_VIDEO_AK881X=y
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_SAA7185=y
CONFIG_VIDEO_THS8200=y
# end of Video encoders
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
# end of Audio/Video compression chips
#
# SDR tuner chips
#
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_I2C is not set
CONFIG_VIDEO_M52790=y
# CONFIG_VIDEO_ST_MIPID02 is not set
CONFIG_VIDEO_THS7303=y
# end of Miscellaneous helper chips
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=y
# CONFIG_MEDIA_TUNER_FC0011 is not set
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_FC2580=y
CONFIG_MEDIA_TUNER_IT913X=y
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
# CONFIG_MEDIA_TUNER_MT2266 is not set
# CONFIG_MEDIA_TUNER_MXL301RF is not set
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
CONFIG_MEDIA_TUNER_QM1D1B0004=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_R820T=y
# CONFIG_MEDIA_TUNER_SI2157 is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18212=y
# CONFIG_MEDIA_TUNER_TDA18218 is not set
CONFIG_MEDIA_TUNER_TDA18250=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
# CONFIG_MEDIA_TUNER_TUA9001 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not set
CONFIG_MEDIA_TUNER_XC4000=y
# CONFIG_MEDIA_TUNER_XC5000 is not set
# end of Customize TV tuners
#
# Tools to develop new frontends
#
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
# CONFIG_IMX_IPUV3_CORE is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KUNIT_TEST=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_BUDDY=y
CONFIG_DRM_GEM_DMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips
#
# ARM devices
#
# CONFIG_DRM_HDLCD is not set
# CONFIG_DRM_MALI_DISPLAY is not set
CONFIG_DRM_KOMEDA=y
# end of ARM devices
# CONFIG_DRM_KMB_DISPLAY is not set
CONFIG_DRM_VGEM=y
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_EXYNOS is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_USE_LVDS is not set
# CONFIG_DRM_RCAR_MIPI_DSI is not set
# CONFIG_DRM_SUN4I is not set
# CONFIG_DRM_MSM is not set
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y
CONFIG_DRM_PANEL_BOE_HIMAX8279D=y
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y
# CONFIG_DRM_PANEL_DSI_CM is not set
CONFIG_DRM_PANEL_LVDS=y
# CONFIG_DRM_PANEL_EBBG_FT8719 is not set
# CONFIG_DRM_PANEL_ELIDA_KD35T133 is not set
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=y
# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set
# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
# CONFIG_DRM_PANEL_JDI_R63452 is not set
CONFIG_DRM_PANEL_KHADAS_TS050=y
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=y
# CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W is not set
# CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829 is not set
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_NOVATEK_NT35560=y
CONFIG_DRM_PANEL_NOVATEK_NT35950=y
CONFIG_DRM_PANEL_NOVATEK_NT36672A=y
# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set
# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
CONFIG_DRM_PANEL_RONBO_RB070D30=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
# CONFIG_DRM_PANEL_SAMSUNG_SOFEF00 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=y
# CONFIG_DRM_PANEL_SHARP_LS060T1SX01 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
CONFIG_DRM_PANEL_SITRONIX_ST7703=y
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=y
CONFIG_DRM_PANEL_TDO_TL070WSH30=y
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y
# CONFIG_DRM_PANEL_VISIONOX_RM69299 is not set
CONFIG_DRM_PANEL_XINPENG_XPP055C272=y
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=y
CONFIG_DRM_CHIPONE_ICN6211=y
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_CROS_EC_ANX7688 is not set
CONFIG_DRM_DISPLAY_CONNECTOR=y
# CONFIG_DRM_FSL_LDB is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
CONFIG_DRM_LONTIUM_LT9611=y
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
CONFIG_DRM_ITE_IT66121=y
CONFIG_DRM_LVDS_CODEC=y
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y
# CONFIG_DRM_NWL_MIPI_DSI is not set
CONFIG_DRM_NXP_PTN3460=y
CONFIG_DRM_PARADE_PS8622=y
CONFIG_DRM_PARADE_PS8640=y
# CONFIG_DRM_SIL_SII8620 is not set
CONFIG_DRM_SII902X=y
# CONFIG_DRM_SII9234 is not set
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_THINE_THC63LVD1024=y
CONFIG_DRM_TOSHIBA_TC358762=y
# CONFIG_DRM_TOSHIBA_TC358764 is not set
CONFIG_DRM_TOSHIBA_TC358767=y
CONFIG_DRM_TOSHIBA_TC358768=y
# CONFIG_DRM_TOSHIBA_TC358775 is not set
CONFIG_DRM_TI_DLPC3433=y
CONFIG_DRM_TI_TFP410=y
# CONFIG_DRM_TI_SN65DSI83 is not set
CONFIG_DRM_TI_SN65DSI86=y
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_CEC=y
# CONFIG_DRM_CDNS_MHDP8546 is not set
# CONFIG_DRM_IMX8QM_LDB is not set
# CONFIG_DRM_IMX8QXP_LDB is not set
# CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set
# CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI is not set
# end of Display Interface Bridges
# CONFIG_DRM_INGENIC is not set
# CONFIG_DRM_V3D is not set
CONFIG_DRM_ETNAVIV=y
# CONFIG_DRM_ETNAVIV_THERMAL is not set
CONFIG_DRM_LOGICVC=y
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
# CONFIG_DRM_IMX_LCDIF is not set
CONFIG_DRM_ARCPGU=y
CONFIG_DRM_SIMPLEDRM=y
# CONFIG_DRM_PL111 is not set
# CONFIG_DRM_TVE200 is not set
# CONFIG_DRM_LIMA is not set
# CONFIG_DRM_ASPEED_GFX is not set
# CONFIG_DRM_MCDE is not set
# CONFIG_DRM_TIDSS is not set
CONFIG_DRM_SSD130X=y
# CONFIG_DRM_SSD130X_I2C is not set
# CONFIG_DRM_SPRD is not set
CONFIG_DRM_LEGACY=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_LIB_RANDOM=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
# CONFIG_FB is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_LM3533=y
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_DA903X is not set
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_MT6370 is not set
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_RT4831=y
# CONFIG_BACKLIGHT_ADP5520 is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_PCF50633=y
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_SKY81452 is not set
CONFIG_BACKLIGHT_AS3711=y
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
# CONFIG_BACKLIGHT_RAVE_SP is not set
# end of Backlight & LCD device support
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
# end of Graphics support
# CONFIG_SOUND is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
# CONFIG_PWRSEQ_SIMPLE is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=y
CONFIG_MMC_CRYPTO=y
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
# CONFIG_MMC_SDHCI_OF_ASPEED is not set
CONFIG_MMC_SDHCI_OF_AT91=y
# CONFIG_MMC_SDHCI_OF_ESDHC is not set
CONFIG_MMC_SDHCI_OF_DWCMSHC=y
# CONFIG_MMC_SDHCI_OF_SPARX5 is not set
CONFIG_MMC_SDHCI_CADENCE=y
# CONFIG_MMC_SDHCI_CNS3XXX is not set
# CONFIG_MMC_SDHCI_ESDHC_IMX is not set
# CONFIG_MMC_SDHCI_DOVE is not set
# CONFIG_MMC_SDHCI_TEGRA is not set
# CONFIG_MMC_SDHCI_S3C is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_SDHCI_SPEAR is not set
# CONFIG_MMC_SDHCI_BCM_KONA is not set
CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_SDHCI_MILBEAUT=y
# CONFIG_MMC_SDHCI_IPROC is not set
# CONFIG_MMC_MESON_GX is not set
# CONFIG_MMC_MESON_MX_SDHC is not set
# CONFIG_MMC_MESON_MX_SDIO is not set
# CONFIG_MMC_MOXART is not set
# CONFIG_MMC_SDHCI_ST is not set
# CONFIG_MMC_OMAP_HS is not set
# CONFIG_MMC_SDHCI_MSM is not set
# CONFIG_MMC_DAVINCI is not set
# CONFIG_MMC_S3C is not set
# CONFIG_MMC_SDHCI_SPRD is not set
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SDHI is not set
# CONFIG_MMC_UNIPHIER is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_SH_MMCIF is not set
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_CQHCI=y
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_BCM2835 is not set
# CONFIG_MMC_MTK is not set
CONFIG_MMC_SDHCI_XENON=y
# CONFIG_MMC_SDHCI_OMAP is not set
CONFIG_MMC_SDHCI_AM654=y
# CONFIG_MMC_OWL is not set
CONFIG_MMC_LITEX=y
# CONFIG_SCSI_UFSHCD is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
# CONFIG_MS_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
#
# Speakup console speech
#
# end of Speakup console speech
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
CONFIG_RTC_DEBUG=y
CONFIG_RTC_LIB_KUNIT_TEST=y
# CONFIG_RTC_NVMEM is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABEOZ9=y
CONFIG_RTC_DRV_ABX80X=y
# CONFIG_RTC_DRV_BRCMSTB is not set
# CONFIG_RTC_DRV_AS3722 is not set
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_HYM8563 is not set
CONFIG_RTC_DRV_MAX313XX=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8925=y
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_MAX8997=y
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_NCT3018Y=y
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_ISL12026=y
# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF85363=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BD70528=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TPS65910=y
# CONFIG_RTC_DRV_RC5T583 is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3028=y
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_S5M is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=y
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
# CONFIG_RTC_DRV_DA9063 is not set
CONFIG_RTC_DRV_STK17TA8=y
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_GAMECUBE is not set
CONFIG_RTC_DRV_WM8350=y
# CONFIG_RTC_DRV_SC27XX is not set
CONFIG_RTC_DRV_SPEAR=y
CONFIG_RTC_DRV_PCF50633=y
CONFIG_RTC_DRV_ZYNQMP=y
CONFIG_RTC_DRV_NTXEC=y
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_ASM9260 is not set
# CONFIG_RTC_DRV_DAVINCI is not set
# CONFIG_RTC_DRV_DIGICOLOR is not set
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
# CONFIG_RTC_DRV_MESON is not set
# CONFIG_RTC_DRV_MESON_VRTC is not set
# CONFIG_RTC_DRV_S3C is not set
# CONFIG_RTC_DRV_EP93XX is not set
# CONFIG_RTC_DRV_AT91RM9200 is not set
# CONFIG_RTC_DRV_AT91SAM9 is not set
# CONFIG_RTC_DRV_RZN1 is not set
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_RTC_DRV_VT8500 is not set
# CONFIG_RTC_DRV_SUN6I is not set
# CONFIG_RTC_DRV_SUNXI is not set
# CONFIG_RTC_DRV_MV is not set
# CONFIG_RTC_DRV_ARMADA38X is not set
# CONFIG_RTC_DRV_CADENCE is not set
CONFIG_RTC_DRV_FTRTC010=y
# CONFIG_RTC_DRV_STMP is not set
# CONFIG_RTC_DRV_MC13XXX is not set
# CONFIG_RTC_DRV_JZ4740 is not set
# CONFIG_RTC_DRV_LPC24XX is not set
# CONFIG_RTC_DRV_LPC32XX is not set
# CONFIG_RTC_DRV_PM8XXX is not set
# CONFIG_RTC_DRV_TEGRA is not set
# CONFIG_RTC_DRV_MXC is not set
# CONFIG_RTC_DRV_MXC_V2 is not set
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_MOXART is not set
# CONFIG_RTC_DRV_MT2712 is not set
# CONFIG_RTC_DRV_MT6397 is not set
# CONFIG_RTC_DRV_MT7622 is not set
# CONFIG_RTC_DRV_XGENE is not set
# CONFIG_RTC_DRV_R7301 is not set
# CONFIG_RTC_DRV_STM32 is not set
# CONFIG_RTC_DRV_RTD119X is not set
# CONFIG_RTC_DRV_ASPEED is not set
# CONFIG_RTC_DRV_TI_K3 is not set
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_GOLDFISH=y
# CONFIG_RTC_DRV_MSC313 is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
CONFIG_DMABUF_MOVE_NOTIFY=y
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_SYSFS_STATS=y
# CONFIG_DMABUF_HEAPS_SYSTEM is not set
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
# CONFIG_LINEDISP is not set
# CONFIG_HD44780_COMMON is not set
# CONFIG_HD44780 is not set
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_LCD2S=y
# CONFIG_PARPORT_PANEL is not set
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
CONFIG_CHARLCD_BL_ON=y
# CONFIG_CHARLCD_BL_FLASH is not set
# CONFIG_PANEL is not set
CONFIG_UIO=y
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_PRUSS=y
CONFIG_VFIO=y
CONFIG_VFIO_NOIOMMU=y
# CONFIG_VFIO_PLATFORM is not set
CONFIG_VFIO_MDEV=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VDPA is not set
# CONFIG_VHOST_MENU is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=y
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
# CONFIG_COMEDI_BOND is not set
CONFIG_COMEDI_TEST=y
# CONFIG_COMEDI_PARPORT is not set
# CONFIG_COMEDI_SSV_DNP is not set
# CONFIG_COMEDI_ISA_DRIVERS is not set
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
# CONFIG_COMEDI_TESTS is not set
CONFIG_STAGING=y
# CONFIG_OCTEON_ETHERNET is not set
#
# IIO staging drivers
#
#
# Accelerometers
#
# end of Accelerometers
#
# Analog to digital converters
#
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
CONFIG_ADT7316_I2C=y
# end of Analog digital bi-direction converters
#
# Direct Digital Synthesis
#
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y
# end of Network Analyzer, Impedance Converters
#
# Active energy metering IC
#
CONFIG_ADE7854=y
# CONFIG_ADE7854_I2C is not set
# end of Active energy metering IC
#
# Resolver to digital converters
#
# end of Resolver to digital converters
# end of IIO staging drivers
# CONFIG_STAGING_MEDIA is not set
CONFIG_STAGING_BOARD=y
CONFIG_GREYBUS_BOOTROM=y
CONFIG_GREYBUS_LOG=y
# CONFIG_GREYBUS_LOOPBACK is not set
CONFIG_GREYBUS_POWER=y
CONFIG_GREYBUS_RAW=y
CONFIG_GREYBUS_VIBRATOR=y
# CONFIG_GREYBUS_BRIDGED_PHY is not set
# CONFIG_GREYBUS_ARCHE is not set
CONFIG_BCM_VIDEOCORE=y
# CONFIG_BCM2835_VCHIQ is not set
# CONFIG_VIDEO_BCM2835 is not set
CONFIG_XIL_AXIS_FIFO=y
CONFIG_FIELDBUS_DEV=y
CONFIG_HMS_ANYBUSS_BUS=y
CONFIG_ARCX_ANYBUS_CONTROLLER=y
# CONFIG_HMS_PROFINET is not set
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs
# CONFIG_CLK_HSDK is not set
# CONFIG_COMMON_CLK_APPLE_NCO is not set
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX9485=y
# CONFIG_COMMON_CLK_HI655X is not set
# CONFIG_COMMON_CLK_SCMI is not set
# CONFIG_COMMON_CLK_SCPI is not set
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_BM1880 is not set
CONFIG_COMMON_CLK_CDCE706=y
# CONFIG_COMMON_CLK_TPS68470 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
CONFIG_CLK_TWL6040=y
CONFIG_COMMON_CLK_AXI_CLKGEN=y
# CONFIG_CLK_QORIQ is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_OXNAS is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
CONFIG_COMMON_CLK_VC5=y
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
CONFIG_COMMON_CLK_BD718XX=y
CONFIG_COMMON_CLK_FIXED_MMIO=y
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_COMMON_CLK_BOSTON is not set
# CONFIG_MXC_CLK is not set
# CONFIG_CLK_IMX8MM is not set
# CONFIG_CLK_IMX8MN is not set
# CONFIG_CLK_IMX8MP is not set
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set
#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers
# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SYSCON_CLK is not set
#
# Clock driver for MediaTek SoC
#
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6795 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms
# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
# CONFIG_XILINX_VCU is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
CONFIG_HWSPINLOCK=y
# CONFIG_HWSPINLOCK_OMAP is not set
# CONFIG_HWSPINLOCK_QCOM is not set
# CONFIG_HWSPINLOCK_SPRD is not set
# CONFIG_HWSPINLOCK_STM32 is not set
# CONFIG_HWSPINLOCK_SUN6I is not set
# CONFIG_HSEM_U8500 is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
CONFIG_OF_IOMMU=y
# CONFIG_OMAP_IOMMU is not set
# CONFIG_ROCKCHIP_IOMMU is not set
# CONFIG_SUN50I_IOMMU is not set
# CONFIG_S390_CCW_IOMMU is not set
# CONFIG_S390_AP_IOMMU is not set
# CONFIG_MTK_IOMMU is not set
# CONFIG_SPRD_IOMMU is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
# CONFIG_INGENIC_VPU_RPROC is not set
# CONFIG_MTK_SCP is not set
# CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set
# CONFIG_RCAR_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set
#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMEM is not set
# CONFIG_QCOM_SMD_RPM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_WCNSS_CTRL is not set
# CONFIG_QCOM_APR is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers
# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_ROCKCHIP_IODOMAIN is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TI is not set
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
# CONFIG_DEVFREQ_GOV_PASSIVE is not set
#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
CONFIG_DDR=y
# CONFIG_ATMEL_SDRAMC is not set
# CONFIG_ATMEL_EBI is not set
# CONFIG_BRCMSTB_DPFE is not set
# CONFIG_BRCMSTB_MEMC is not set
# CONFIG_BT1_L2_CTL is not set
# CONFIG_TI_AEMIF is not set
# CONFIG_TI_EMIF is not set
# CONFIG_OMAP_GPMC is not set
# CONFIG_MVEBU_DEVBUS is not set
# CONFIG_FSL_CORENET_CF is not set
# CONFIG_FSL_IFC is not set
# CONFIG_JZ4780_NEMC is not set
# CONFIG_MTK_SMI is not set
# CONFIG_DA8XX_DDRCTL is not set
# CONFIG_RENESAS_RPCIF is not set
# CONFIG_STM32_FMC2_EBI is not set
# CONFIG_SAMSUNG_MC is not set
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=y
CONFIG_TEGRA30_EMC=y
CONFIG_TEGRA124_EMC=y
# CONFIG_TEGRA210_EMC is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
CONFIG_IIO_SW_TRIGGER=y
# CONFIG_IIO_TRIGGERED_EVENT is not set
#
# Accelerometers
#
CONFIG_ADXL313=y
CONFIG_ADXL313_I2C=y
CONFIG_ADXL345=y
CONFIG_ADXL345_I2C=y
CONFIG_ADXL355=y
CONFIG_ADXL355_I2C=y
# CONFIG_ADXL367_I2C is not set
CONFIG_ADXL372=y
CONFIG_ADXL372_I2C=y
CONFIG_BMA180=y
# CONFIG_BMA400 is not set
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD06=y
CONFIG_DMARD09=y
CONFIG_DMARD10=y
# CONFIG_FXLS8962AF_I2C is not set
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
CONFIG_KXSD9=y
CONFIG_KXSD9_I2C=y
CONFIG_KXCJK1013=y
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
# CONFIG_MMA7660 is not set
# CONFIG_MMA8452 is not set
# CONFIG_MMA9551 is not set
# CONFIG_MMA9553 is not set
CONFIG_MSA311=y
# CONFIG_MXC4005 is not set
CONFIG_MXC6255=y
# CONFIG_STK8312 is not set
# CONFIG_STK8BA50 is not set
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD7091R5=y
CONFIG_AD7291=y
# CONFIG_AD7606_IFACE_PARALLEL is not set
CONFIG_AD799X=y
# CONFIG_ADI_AXI_ADC is not set
# CONFIG_ASPEED_ADC is not set
# CONFIG_AT91_SAMA5D2_ADC is not set
CONFIG_AXP20X_ADC=y
CONFIG_AXP288_ADC=y
# CONFIG_BERLIN2_ADC is not set
CONFIG_CC10001_ADC=y
CONFIG_DA9150_GPADC=y
CONFIG_ENVELOPE_DETECTOR=y
# CONFIG_EXYNOS_ADC is not set
CONFIG_HX711=y
# CONFIG_INA2XX_ADC is not set
# CONFIG_INGENIC_ADC is not set
# CONFIG_IMX7D_ADC is not set
# CONFIG_IMX8QXP_ADC is not set
# CONFIG_LPC18XX_ADC is not set
# CONFIG_LPC32XX_ADC is not set
CONFIG_LTC2471=y
CONFIG_LTC2485=y
CONFIG_LTC2497=y
# CONFIG_MAX1363 is not set
CONFIG_MAX9611=y
CONFIG_MCP3422=y
CONFIG_MEDIATEK_MT6360_ADC=y
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
# CONFIG_MESON_SARADC is not set
CONFIG_MP2629_ADC=y
CONFIG_NAU7802=y
# CONFIG_NPCM_ADC is not set
# CONFIG_RCAR_GYRO_ADC is not set
# CONFIG_RICHTEK_RTQ6056 is not set
# CONFIG_RZG2L_ADC is not set
# CONFIG_SC27XX_ADC is not set
# CONFIG_SPEAR_ADC is not set
# CONFIG_SD_ADC_MODULATOR is not set
# CONFIG_STM32_ADC_CORE is not set
# CONFIG_STM32_DFSDM_CORE is not set
# CONFIG_STM32_DFSDM_ADC is not set
# CONFIG_STMPE_ADC is not set
CONFIG_TI_ADC081C=y
CONFIG_TI_ADS1015=y
CONFIG_VF610_ADC=y
CONFIG_XILINX_XADC=y
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set
# end of Analog Front Ends
#
# Amplifiers
#
# CONFIG_HMC425 is not set
# end of Amplifiers
#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
CONFIG_AD7746=y
# end of Capacitance to digital converters
#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
# CONFIG_ATLAS_EZO_SENSOR is not set
# CONFIG_BME680 is not set
CONFIG_CCS811=y
CONFIG_IAQCORE=y
CONFIG_PMS7003=y
# CONFIG_SCD30_CORE is not set
CONFIG_SCD4X=y
CONFIG_SENSIRION_SGP30=y
CONFIG_SENSIRION_SGP40=y
CONFIG_SPS30=y
# CONFIG_SPS30_I2C is not set
CONFIG_SPS30_SERIAL=y
CONFIG_SENSEAIR_SUNRISE_CO2=y
CONFIG_VZ89X=y
# end of Chemical Sensors
#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=y
#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5380=y
CONFIG_AD5446=y
CONFIG_AD5592R_BASE=y
CONFIG_AD5593R=y
CONFIG_AD5686=y
CONFIG_AD5696_I2C=y
# CONFIG_DPOT_DAC is not set
CONFIG_DS4424=y
# CONFIG_LPC18XX_DAC is not set
# CONFIG_M62332 is not set
CONFIG_MAX517=y
# CONFIG_MAX5821 is not set
# CONFIG_MCP4725 is not set
# CONFIG_STM32_DAC is not set
CONFIG_TI_DAC5571=y
CONFIG_VF610_DAC=y
# end of Digital to analog converters
#
# IIO dummy driver
#
# end of IIO dummy driver
#
# Filters
#
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
# CONFIG_FXAS21002C is not set
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
# CONFIG_ITG3200 is not set
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
# CONFIG_AFE4404 is not set
CONFIG_MAX30100=y
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
CONFIG_AM2315=y
# CONFIG_DHT11 is not set
# CONFIG_HDC100X is not set
CONFIG_HDC2010=y
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
CONFIG_SI7020=y
# end of Humidity sensors
#
# Inertial measurement units
#
# CONFIG_BMI160_I2C is not set
CONFIG_BOSCH_BNO055=y
CONFIG_BOSCH_BNO055_SERIAL=y
# CONFIG_BOSCH_BNO055_I2C is not set
CONFIG_FXOS8700=y
CONFIG_FXOS8700_I2C=y
CONFIG_KMX61=y
# CONFIG_INV_ICM42600_I2C is not set
# CONFIG_INV_MPU6050_I2C is not set
# CONFIG_IIO_ST_LSM6DSX is not set
# CONFIG_IIO_ST_LSM9DS0 is not set
# end of Inertial measurement units
#
# Light sensors
#
CONFIG_ADJD_S311=y
CONFIG_ADUX1020=y
CONFIG_AL3010=y
# CONFIG_AL3320A is not set
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_AS73211=y
# CONFIG_BH1750 is not set
# CONFIG_BH1780 is not set
CONFIG_CM32181=y
CONFIG_CM3232=y
# CONFIG_CM3323 is not set
CONFIG_CM3605=y
CONFIG_CM36651=y
# CONFIG_GP2AP002 is not set
CONFIG_GP2AP020A00F=y
CONFIG_IQS621_ALS=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
# CONFIG_JSA1212 is not set
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=y
# CONFIG_LTR501 is not set
CONFIG_LTRF216A=y
# CONFIG_LV0104CS is not set
CONFIG_MAX44000=y
CONFIG_MAX44009=y
CONFIG_NOA1305=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
# CONFIG_SI1133 is not set
CONFIG_SI1145=y
CONFIG_STK3310=y
# CONFIG_ST_UVIS25 is not set
CONFIG_TCS3414=y
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL2591=y
CONFIG_TSL2772=y
# CONFIG_TSL4531 is not set
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VCNL4035=y
# CONFIG_VEML6030 is not set
CONFIG_VEML6070=y
CONFIG_VL6180=y
CONFIG_ZOPT2201=y
# end of Light sensors
#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_MAG3110=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
CONFIG_YAMAHA_YAS530=y
# end of Magnetometer sensors
#
# Multiplexers
#
# CONFIG_IIO_MUX is not set
# end of Multiplexers
#
# Inclinometer sensors
#
# end of Inclinometer sensors
CONFIG_IIO_FORMAT_KUNIT_TEST=y
#
# Triggers - standalone
#
# CONFIG_IIO_HRTIMER_TRIGGER is not set
CONFIG_IIO_INTERRUPT_TRIGGER=y
# CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
# CONFIG_IIO_SYSFS_TRIGGER is not set
# end of Triggers - standalone
#
# Linear and angular position sensors
#
# CONFIG_IQS624_POS is not set
# end of Linear and angular position sensors
#
# Digital potentiometers
#
CONFIG_AD5110=y
# CONFIG_AD5272 is not set
# CONFIG_DS1803 is not set
CONFIG_MAX5432=y
CONFIG_MCP4018=y
CONFIG_MCP4531=y
CONFIG_TPL0102=y
# end of Digital potentiometers
#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set
# end of Digital potentiostats
#
# Pressure sensors
#
CONFIG_ABP060MG=y
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_DLHL60D=y
# CONFIG_DPS310 is not set
CONFIG_HP03=y
CONFIG_ICP10100=y
# CONFIG_MPL115_I2C is not set
CONFIG_MPL3115=y
CONFIG_MS5611=y
CONFIG_MS5611_I2C=y
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
# CONFIG_IIO_ST_PRESS_I2C is not set
CONFIG_T5403=y
CONFIG_HP206C=y
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
# end of Pressure sensors
#
# Lightning sensors
#
# end of Lightning sensors
#
# Proximity and distance sensors
#
CONFIG_ISL29501=y
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=y
CONFIG_PING=y
# CONFIG_RFD77402 is not set
CONFIG_SRF04=y
# CONFIG_SX9310 is not set
# CONFIG_SX9324 is not set
# CONFIG_SX9360 is not set
CONFIG_SX9500=y
CONFIG_SRF08=y
CONFIG_VCNL3020=y
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# end of Resolver to digital converters
#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=y
# CONFIG_MLX90614 is not set
CONFIG_MLX90632=y
# CONFIG_TMP006 is not set
CONFIG_TMP007=y
CONFIG_TMP117=y
CONFIG_TSYS01=y
# CONFIG_TSYS02D is not set
# end of Temperature sensors
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_ATMEL is not set
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_ATMEL_TCB=y
# CONFIG_PWM_BCM_IPROC is not set
# CONFIG_PWM_BCM_KONA is not set
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_BERLIN is not set
# CONFIG_PWM_BRCMSTB is not set
CONFIG_PWM_CLK=y
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_EP93XX is not set
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
# CONFIG_PWM_IMX_TPM is not set
# CONFIG_PWM_INTEL_LGM is not set
CONFIG_PWM_IQS620A=y
# CONFIG_PWM_JZ4740 is not set
# CONFIG_PWM_KEEMBAY is not set
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_MXS is not set
CONFIG_PWM_NTXEC=y
# CONFIG_PWM_OMAP_DMTIMER is not set
CONFIG_PWM_PCA9685=y
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
# CONFIG_PWM_SAMSUNG is not set
# CONFIG_PWM_SIFIVE is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPEAR is not set
# CONFIG_PWM_SPRD is not set
# CONFIG_PWM_STI is not set
# CONFIG_PWM_STM32 is not set
# CONFIG_PWM_STM32_LP is not set
# CONFIG_PWM_STMPE is not set
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_SUNPLUS is not set
# CONFIG_PWM_TEGRA is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
# CONFIG_PWM_VISCONTI is not set
# CONFIG_PWM_VT8500 is not set
CONFIG_PWM_XILINX=y
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
# CONFIG_XILINX_INTC is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_IMX_MU_MSI is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
# CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not set
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_BCM_NS_USB3 is not set
# CONFIG_PHY_NS2_PCIE is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=y
CONFIG_PHY_CADENCE_SALVO=y
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not set
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
CONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
# CONFIG_PHY_MTK_TPHY is not set
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_MTK_HDMI is not set
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
# CONFIG_PHY_ATH79_USB is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB3 is not set
# CONFIG_PHY_UNIPHIER_PCIE is not set
# CONFIG_PHY_UNIPHIER_AHCI is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_SUNPLUS_USB is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_PHY_J721E_WIZ is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_COMBO is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
CONFIG_POWERCAP=y
# CONFIG_DTPM is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# CONFIG_ARM_CCN is not set
# CONFIG_ARM_CMN is not set
# CONFIG_FSL_IMX8_DDR_PMU is not set
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
# end of Performance monitor support
CONFIG_RAS=y
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
# CONFIG_DAX is not set
# CONFIG_NVMEM is not set
#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
CONFIG_STM_PROTO_SYS_T=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_STM_SOURCE_FTRACE=y
# CONFIG_INTEL_TH is not set
# end of HW tracing support
CONFIG_FPGA=y
# CONFIG_FPGA_MGR_SOCFPGA is not set
# CONFIG_FPGA_MGR_SOCFPGA_A10 is not set
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_ALTERA_PR_IP_CORE_PLAT=y
# CONFIG_FPGA_MGR_ZYNQ_FPGA is not set
# CONFIG_FPGA_BRIDGE is not set
# CONFIG_FPGA_DFL is not set
# CONFIG_FPGA_MGR_ZYNQMP_FPGA is not set
# CONFIG_FPGA_MGR_VERSAL_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
# CONFIG_SLIM_QCOM_CTRL is not set
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
CONFIG_PECI=y
# CONFIG_PECI_CPU is not set
# CONFIG_PECI_ASPEED is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_EXT4_KUNIT_TESTS=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
CONFIG_XFS_ONLINE_SCRUB=y
# CONFIG_XFS_ONLINE_REPAIR is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=y
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
# CONFIG_F2FS_FS_LZORLE is not set
# CONFIG_F2FS_FS_LZ4 is not set
# CONFIG_F2FS_FS_ZSTD is not set
CONFIG_F2FS_IOSTAT=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_ENCRYPTION_INLINE_CRYPT is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_VIRTIO_FS=y
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_KUNIT_TEST=y
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
CONFIG_NTFS3_FS=y
# CONFIG_NTFS3_LZX_XPRESS is not set
CONFIG_NTFS3_FS_POSIX_ACL=y
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_BIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_PATH=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_DEBUG=y
# CONFIG_SECURITY_APPARMOR_DEBUG_ASSERTS is not set
# CONFIG_SECURITY_APPARMOR_DEBUG_MESSAGES is not set
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
CONFIG_SECURITY_APPARMOR_KUNIT_TEST=y
CONFIG_SECURITY_LOADPIN=y
# CONFIG_SECURITY_LOADPIN_ENFORCE is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_SECURITY_SAFESETID=y
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,tomoyo,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL_PATTERN is not set
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
CONFIG_ZERO_CALL_USED_REGS=y
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
# end of Crypto core or helper
#
# Public-key cryptography
#
# CONFIG_CRYPTO_RSA is not set
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
# CONFIG_CRYPTO_ECRDSA is not set
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARIA=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=y
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XCTR=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=y
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLYVAL=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_VMAC is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRC64_ROCKSOFT is not set
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
# end of Compression
#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_NO_SG_CHAIN=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
CONFIG_STACKTRACE_BUILD_ID=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
# CONFIG_SYMBOLIC_ERRNAME is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_KGDB_KDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
# CONFIG_UBSAN_BOUNDS is not set
# CONFIG_UBSAN_SHIFT is not set
CONFIG_UBSAN_DIV_ZERO=y
# CONFIG_UBSAN_UNREACHABLE is not set
# CONFIG_UBSAN_BOOL is not set
CONFIG_UBSAN_ENUM=y
CONFIG_UBSAN_SANITIZE_ALL=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
CONFIG_DEBUG_NET=y
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_DEBUG_SLAB=y
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_PAGE_REF=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SHRINKER_DEBUG=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
# CONFIG_KFENCE_DEFERRABLE is not set
CONFIG_KFENCE_STATIC_KEYS=y
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
CONFIG_KFENCE_KUNIT_TEST=y
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_WQ_WATCHDOG=y
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
CONFIG_DEBUG_KOBJECT=y
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_BOOTTIME_TRACING=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_HWLAT_TRACER=y
CONFIG_OSNOISE_TRACER=y
# CONFIG_TIMERLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_PROFILE_ALL_BRANCHES=y
CONFIG_TRACING_BRANCHES=y
CONFIG_BRANCH_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_DYNAMIC_EVENTS=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY=y
CONFIG_SYNTH_EVENTS=y
# CONFIG_USER_EVENTS is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=y
CONFIG_TRACE_EVAL_MAP_FILE=y
CONFIG_FTRACE_RECORD_RECURSION=y
CONFIG_FTRACE_RECORD_RECURSION_SIZE=128
# CONFIG_RING_BUFFER_RECORD_RECURSION is not set
CONFIG_GCOV_PROFILE_FTRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
CONFIG_SYNTH_EVENT_GEN_TEST=y
# CONFIG_RV is not set
# CONFIG_SAMPLES is not set
#
# parisc Debugging
#
# end of parisc Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
# CONFIG_KUNIT_DEFAULT_ENABLED is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT is not set
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_RUNTIME_TESTING_MENU is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2022-11-08 12:22 ` [PATCH v3 1/2] " Ibrahim Tilki
` (2 preceding siblings ...)
2022-11-09 10:38 ` kernel test robot
@ 2022-12-10 22:01 ` Alexandre Belloni
2023-02-14 20:28 ` Chris Packham
4 siblings, 0 replies; 15+ messages in thread
From: Alexandre Belloni @ 2022-12-10 22:01 UTC (permalink / raw)
To: Ibrahim Tilki
Cc: a.zummo, jdelvare, linux, robh+dt, krzysztof.kozlowski+dt,
linux-rtc, linux-kernel, linux-hwmon, devicetree,
Zeynep Arslanbenzer
On 08/11/2022 15:22:53+0300, Ibrahim Tilki wrote:
> +static int max313xx_trickle_charger_setup(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool diode_disable;
> + int index, reg;
> + u32 ohms = 0;
> + int ret;
> +
> + device_property_read_u32(dev, "trickle-resistor-ohms", &ohms);
> + if (!ohms)
> + return 0;
> +
> + diode_disable = device_property_read_bool(dev, "trickle-diode-disable");
This property is deprecated, please do not add a new user.
> +static int max313xx_irq_init(struct device *dev, const char *devname)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool wakeup;
> + int ret;
> +
> + rtc->irq = rtc->irqs[0];
> +
> + switch (rtc->id) {
> + case ID_MAX31328:
> + /* max31328 sqw ant int pin is shared */
> + if (rtc->id == ID_MAX31328 && rtc->irq > 0 && rtc->clkout.clk)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "cannot have both sqw clock output and irq enabled");
> +
> + break;
> + case ID_MAX31331:
> + case ID_MAX31334:
> + if (rtc->clkout.clk) {
> + /* clockout needs to be enabled for using INTA pin */
> + ret = clk_prepare_enable(rtc->clkout.clk);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "cannot enable clkout\n");
> + } else {
> + rtc->irq = rtc->irqs[1];
> + }
> + break;
> + default:
> + if (rtc->clkin) {
> + rtc->irq = rtc->irqs[1];
> +
> + /* wrong interrupt specified */
> + if (rtc->irqs[0] > 0 && rtc->irqs[1] <= 0)
> + dev_warn(dev, "INTA is specified but INTB required for irq when clkin is enabled\n");
> +
> + if (rtc->clkout.clk && rtc->irq > 0)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "irq not possible when both clkin and clkout are configured\n");
> +
> + if (rtc->irq <= 0)
> + break;
> +
> + /* clkout needs to be disabled for using INTB pin */
> + if (rtc->chip->clkout->en_invert)
> + ret = regmap_set_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> + else
> + ret = regmap_clear_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> +
> + if (ret)
> + return ret;
> + }
> + break;
> + }
I really don't like this logic that relies on interrupt-names.
interrupt-names has to be optional and the interrupt position is
meaningful. You are doing/enforcing pinmuxing on this property which
should really not be done. what you need is rather properties
explicitly telling what is muxed to INTA and INTB.
Your current logic enforces clkout on INTB which may not be what a user
wants.
> +
> + if (rtc->irq > 0) {
> + ret = devm_request_threaded_irq(dev, rtc->irq, NULL,
> + &max313xx_irq, IRQF_ONESHOT,
> + devname, rtc);
> + if (ret)
> + return ret;
> +
> + wakeup = device_property_read_bool(dev, "wakeup-source");
wakeup-source is only needed when you don't have an interrupt. If an
interrupt is present, it is assumed it is able to wakeup.
> + return device_init_wakeup(dev, wakeup);
> + }
> +
> + __clear_bit(RTC_FEATURE_ALARM, rtc->rtc->features);
> +
> + return 0;
> +}
> +
> +static int max313xx_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct max313xx *max313xx;
> + struct device *hwmon;
> + const void *match;
> + int ret;
> +
> + max313xx = devm_kzalloc(&client->dev, sizeof(*max313xx), GFP_KERNEL);
> + if (!max313xx)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&client->dev, max313xx);
> +
> + max313xx->regmap = devm_regmap_init_i2c(client, ®map_config);
> + if (IS_ERR(max313xx->regmap)) {
> + return dev_err_probe(dev, PTR_ERR(max313xx->regmap),
> + "regmap init failed\n");
> + }
> +
> + i2c_set_clientdata(client, max313xx);
> +
> + match = device_get_match_data(dev);
> + if (match)
> + max313xx->id = (enum max313xx_ids)match;
> + else if (id)
> + max313xx->id = id->driver_data;
> + else
> + return -ENODEV;
> +
> + max313xx->chip = &chip[max313xx->id];
> +
> + ret = max313xx_init(max313xx);
> + if (ret)
> + return ret;
> +
> + max313xx->rtc = devm_rtc_allocate_device(dev);
> + if (IS_ERR(max313xx->rtc))
> + return PTR_ERR(max313xx->rtc);
> +
> + max313xx->rtc->ops = &max3133x_rtc_ops;
> + max313xx->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
> + max313xx->rtc->range_max = RTC_TIMESTAMP_END_2199;
> +
> + ret = devm_rtc_register_device(max313xx->rtc);
> + if (ret)
> + return ret;
> +
> + switch (max313xx->id) {
> + case ID_MAX31328:
> + case ID_MAX31343:
> + max313xx->irqs[0] = client->irq;
> + break;
> + default:
> + max313xx->irqs[0] = fwnode_irq_get_byname(dev_fwnode(dev), "INTA");
> + max313xx->irqs[1] = fwnode_irq_get_byname(dev_fwnode(dev), "INTB");
> + if (max313xx->irqs[0] <= 0 && max313xx->irqs[1] <= 0 && client->irq)
> + return dev_err_probe(dev, -ENOENT,
> + "interrupt requested but no interrupt name specified\n");
> +
> + break;
> + }
> +
> + ret = max313xx_clkout_register(dev);
> + if (ret)
> + return ret;
> +
> + ret = max313xx_clkin_init(dev);
> + if (ret)
> + return ret;
> +
> + /* IRQ wiring depends on the clock configuration so parse them first */
> + ret = max313xx_irq_init(dev, client->name);
> + if (ret)
> + return ret;
> +
> + if (max313xx->chip->ram_size) {
> + max313xx_nvmem_cfg.size = max313xx->chip->ram_size;
> + max313xx_nvmem_cfg.priv = max313xx;
> +
> + ret = devm_rtc_nvmem_register(max313xx->rtc, &max313xx_nvmem_cfg);
> + if (ret)
> + dev_warn(dev, "cannot register rtc nvmem\n");
> + }
> +
> + if (max313xx->chip->temp_reg) {
> + hwmon = devm_hwmon_device_register_with_info(dev, client->name,
> + max313xx,
> + &max313xx_chip_info,
> + NULL);
> + if (IS_ERR(hwmon))
> + dev_warn(dev, "cannot register hwmon device: %li\n",
> + PTR_ERR(hwmon));
> + }
> +
> + return max313xx_trickle_charger_setup(dev);
> +}
> +
> +static const struct of_device_id max313xx_of_id[] = {
> + { .compatible = "adi,max31328", .data = (void *)ID_MAX31328 },
> + { .compatible = "adi,max31329", .data = (void *)ID_MAX31329 },
> + { .compatible = "adi,max31331", .data = (void *)ID_MAX31331 },
> + { .compatible = "adi,max31334", .data = (void *)ID_MAX31334 },
> + { .compatible = "adi,max31341", .data = (void *)ID_MAX31341 },
> + { .compatible = "adi,max31342", .data = (void *)ID_MAX31342 },
> + { .compatible = "adi,max31343", .data = (void *)ID_MAX31343 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, max313xx_of_id);
> +
> +static const struct i2c_device_id max313xx_id[] = {
> + { "max31328", ID_MAX31328 },
> + { "max31329", ID_MAX31329 },
> + { "max31331", ID_MAX31331 },
> + { "max31334", ID_MAX31334 },
> + { "max31341", ID_MAX31341 },
> + { "max31342", ID_MAX31342 },
> + { "max31343", ID_MAX31343 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, max313xx_id);
> +
> +static struct i2c_driver max313xx_driver = {
> + .driver = {
> + .name = "rtc-max313xx",
> + .of_match_table = max313xx_of_id,
> + },
> + .probe = max313xx_probe,
> + .id_table = max313xx_id,
> +};
> +module_i2c_driver(max313xx_driver);
> +
> +MODULE_DESCRIPTION("Analog Devices MAX313XX RTCs");
> +MODULE_AUTHOR("Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>");
> +MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@analog.com>");
> +MODULE_SOFTDEP("pre: regmap-i2c");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION("1.0");
> --
> 2.25.1
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2022-11-08 12:22 ` [PATCH v3 1/2] " Ibrahim Tilki
` (3 preceding siblings ...)
2022-12-10 22:01 ` Alexandre Belloni
@ 2023-02-14 20:28 ` Chris Packham
2023-02-14 21:40 ` Alexandre Belloni
2023-02-17 15:17 ` Tilki, Ibrahim
4 siblings, 2 replies; 15+ messages in thread
From: Chris Packham @ 2023-02-14 20:28 UTC (permalink / raw)
To: Ibrahim Tilki, a.zummo, alexandre.belloni, jdelvare, linux,
robh+dt, krzysztof.kozlowski+dt
Cc: linux-rtc, linux-kernel, linux-hwmon, devicetree, Zeynep Arslanbenzer
Hi Ibrahim,
On 9/11/22 01:22, Ibrahim Tilki wrote:
> Adding support for Analog Devices MAX313XX series RTCs.
>
> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
> ---
> drivers/rtc/Kconfig | 11 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 1082 insertions(+)
> create mode 100644 drivers/rtc/rtc-max313xx.c
What is the current state of this work? I see there are some comments on
this v3 iteration from late last year and I couldn't find any newer
iteration on any mailing list. We've got some new hardware arriving soon
that will have the MAX31331 RTC and I'm keen to see this patch series
land. Is there anything I can do to help it along? I can't be very
specific about when I'll see the new hardware (who can these days), the
last update was "boards are due in March".
For the maintainers on the Cc list once the dust settles how would I get
this supported in a LTS kernel (we're currently using the 5.15 series)?
Or is totally out of the question because it's not just a new device id?
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index b8de25118..71ea390dc 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -323,6 +323,17 @@ config RTC_DRV_LP8788
> help
> Say Y to enable support for the LP8788 RTC/ALARM driver.
>
> +config RTC_DRV_MAX313XX
> + tristate "Analog Devices MAX313XX RTC driver"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + If you say yes here you will get support for the
> + Analog Devices MAX313XX series RTC family.
> +
> + This driver can also be built as a module. If so, the module
> + will be called rtc-max313xx.
> +
> config RTC_DRV_MAX6900
> tristate "Maxim MAX6900"
> help
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index aab22bc63..3d1aab897 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -89,6 +89,7 @@ obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o
> obj-$(CONFIG_RTC_DRV_M48T35) += rtc-m48t35.o
> obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
> obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
> +obj-$(CONFIG_RTC_DRV_MAX313XX) += rtc-max313xx.o
> obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
> obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
> obj-$(CONFIG_RTC_DRV_MAX6916) += rtc-max6916.o
> diff --git a/drivers/rtc/rtc-max313xx.c b/drivers/rtc/rtc-max313xx.c
> new file mode 100644
> index 000000000..b1f7ab189
> --- /dev/null
> +++ b/drivers/rtc/rtc-max313xx.c
> @@ -0,0 +1,1070 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Analog Devices MAX313XX series I2C RTC driver
> + *
> + * Copyright 2022 Analog Devices Inc.
> + */
> +#include <asm-generic/unaligned.h>
> +#include <linux/bcd.h>
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/hwmon.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +#include <linux/util_macros.h>
> +
> +/* common registers */
> +#define MAX313XX_INT_ALARM1 BIT(0)
> +#define MAX313XX_INT_ALARM2 BIT(1)
> +#define MAX313XX_HRS_F_12_24 BIT(6)
> +#define MAX313XX_HRS_F_AM_PM BIT(5)
> +#define MAX313XX_MONTH_CENTURY BIT(7)
> +
> +#define MAX313XX_TMR_CFG_ENABLE BIT(4)
> +#define MAX313XX_TMR_CFG_FREQ_MASK GENMASK(1, 0)
> +#define MAX313XX_TMR_CFG_FREQ_16HZ 0x03
> +
> +#define MAX313XX_REG_MINUTE 0x01
> +#define MAX313XX_REG_HOUR 0x02
> +
> +#define MAX313XX_TIME_SIZE 0x07
> +
> +/* device specific registers */
> +#define MAX3134X_CFG2_REG 0x01
> +#define MAX3134X_CFG2_SET_RTC BIT(1)
> +
> +#define MAX31341_TRICKLE_RES_MASK GENMASK(1, 0)
> +#define MAX31341_TRICKLE_DIODE_EN BIT(2)
> +#define MAX31341_TRICKLE_ENABLE_BIT BIT(3)
> +#define MAX31341_POWER_MGMT_REG 0x56
> +#define MAX31341_POWER_MGMT_TRICKLE_BIT BIT(0)
> +
> +#define MAX3133X_TRICKLE_RES_MASK GENMASK(2, 1)
> +#define MAX3133X_TRICKLE_DIODE_EN BIT(3)
> +#define MAX3133X_TRICKLE_ENABLE_BIT BIT(0)
> +
> +#define MAX31329_TRICKLE_ENABLE_BIT BIT(7)
> +#define MAX31343_TRICKLE_ENABLE_MASK GENMASK(7, 4)
> +#define MAX31343_TRICKLE_ENABLE_CODE 5
> +#define MAX31329_43_TRICKLE_RES_MASK GENMASK(1, 0)
> +#define MAX31329_43_TRICKLE_DIODE_EN BIT(2)
> +
> +#define MAX31329_CONFIG2_REG 0x04
> +#define MAX31329_CONFIG2_CLKIN_EN BIT(2)
> +#define MAX31329_CONFIG2_CLKIN_FREQ GENMASK(1, 0)
> +
> +#define MAX31341_42_CONFIG1_REG 0x00
> +#define MAX31341_42_CONFIG1_CLKIN_EN BIT(7)
> +#define MAX31341_42_CONFIG1_CLKIN_FREQ GENMASK(5, 4)
> +#define MAX31341_42_CONFIG1_OSC_DISABLE BIT(3)
> +#define MAX31341_42_CONFIG1_SWRST BIT(0)
> +
> +enum max313xx_ids {
> + ID_MAX31328,
> + ID_MAX31329,
> + ID_MAX31331,
> + ID_MAX31334,
> + ID_MAX31341,
> + ID_MAX31342,
> + ID_MAX31343,
> + MAX313XX_ID_NR
> +};
> +
> +struct clkout_cfg {
> + const int *freq_avail;
> + u8 freq_size;
> + u8 freq_pos;
> + u8 reg;
> + u8 en_bit;
> + bool en_invert;
> +};
> +
> +struct chip_desc {
> + struct clkout_cfg *clkout;
> + const char *clkout_name;
> + u8 sec_reg;
> + u8 alarm1_sec_reg;
> +
> + u8 int_en_reg;
> + u8 int_status_reg;
> +
> + u8 ram_reg;
> + u8 ram_size;
> +
> + u8 temp_reg;
> +
> + u8 trickle_reg;
> +};
> +
> +#define clk_hw_to_max313xx(_hw) container_of(_hw, struct max313xx, clkout)
> +
> +struct max313xx {
> + enum max313xx_ids id;
> + struct regmap *regmap;
> + struct rtc_device *rtc;
> + struct clk_hw clkout;
> + struct clk *clkin;
> + const struct chip_desc *chip;
> + int irqs[2];
> + int irq;
> +};
> +
> +static const int max313xx_clkin_freq[] = { 1, 50, 60, 32768 };
> +
> +static const int max31328_clkout_freq[] = { 1, 1024, 4096, 8192 };
> +static const int max31329_clkout_freq[] = { 1, 4096, 8192, 32768 };
> +static const int max3133x_clkout_freq[] = { 1, 64, 1024, 32768 };
> +static const int max31341_42_clkout_freq[] = { 1, 50, 60, 32768 };
> +static const int max31343_clkout_freq[] = { 1, 2, 4, 8, 16, 32, 64, 128, 32875 };
> +
> +static struct clkout_cfg max31328_clkout = {
> + .freq_avail = max31328_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31328_clkout_freq),
> + .freq_pos = 3,
> + .reg = 0x0E,
> + .en_bit = BIT(3),
> + .en_invert = true,
> +};
> +
> +static struct clkout_cfg max31329_clkout = {
> + .freq_avail = max31329_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31329_clkout_freq),
> + .freq_pos = 5,
> + .reg = 0x04,
> + .en_bit = BIT(7),
> +};
> +
> +static struct clkout_cfg max3133x_clkout = {
> + .freq_avail = max3133x_clkout_freq,
> + .freq_size = ARRAY_SIZE(max3133x_clkout_freq),
> + .freq_pos = 0,
> + .reg = 0x04,
> + .en_bit = BIT(2),
> +};
> +
> +static struct clkout_cfg max31341_42_clkout = {
> + .freq_avail = max31341_42_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31341_42_clkout_freq),
> + .freq_pos = 1,
> + .reg = 0x00,
> + .en_bit = BIT(6),
> + .en_invert = true,
> +};
> +
> +static struct clkout_cfg max31343_clkout = {
> + .freq_avail = max31343_clkout_freq,
> + .freq_size = ARRAY_SIZE(max31343_clkout_freq),
> + .freq_pos = 3,
> + .reg = 0x04,
> + .en_bit = BIT(7),
> +};
> +
> +static const struct chip_desc chip[MAX313XX_ID_NR] = {
> + [ID_MAX31328] = {
> + .int_en_reg = 0x0E,
> + .int_status_reg = 0x0F,
> + .sec_reg = 0x00,
> + .alarm1_sec_reg = 0x07,
> + .temp_reg = 0x11,
> + .clkout = &max31328_clkout,
> + .clkout_name = "max31328-sqw",
> + },
> + [ID_MAX31329] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .ram_reg = 0x22,
> + .ram_size = 64,
> + .trickle_reg = 0x19,
> + .clkout = &max31329_clkout,
> + .clkout_name = "max31329-clkout",
> + },
> + [ID_MAX31331] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x08,
> + .alarm1_sec_reg = 0x0F,
> + .ram_reg = 0x20,
> + .ram_size = 32,
> + .trickle_reg = 0x1B,
> + .clkout = &max3133x_clkout,
> + .clkout_name = "max31331-clkout",
> + },
> + [ID_MAX31334] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x09,
> + .alarm1_sec_reg = 0x10,
> + .ram_reg = 0x30,
> + .ram_size = 32,
> + .trickle_reg = 0x1E,
> + .clkout = &max3133x_clkout,
> + .clkout_name = "max31334-clkout",
> + },
> + [ID_MAX31341] = {
> + .int_en_reg = 0x04,
> + .int_status_reg = 0x05,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .ram_reg = 0x16,
> + .ram_size = 64,
> + .trickle_reg = 0x57,
> + .clkout = &max31341_42_clkout,
> + .clkout_name = "max31341-clkout",
> + },
> + [ID_MAX31342] = {
> + .int_en_reg = 0x04,
> + .int_status_reg = 0x05,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .clkout = &max31341_42_clkout,
> + .clkout_name = "max31342-clkout",
> + },
> + [ID_MAX31343] = {
> + .int_en_reg = 0x01,
> + .int_status_reg = 0x00,
> + .sec_reg = 0x06,
> + .alarm1_sec_reg = 0x0D,
> + .ram_reg = 0x22,
> + .ram_size = 64,
> + .temp_reg = 0x1A,
> + .trickle_reg = 0x19,
> + .clkout = &max31343_clkout,
> + .clkout_name = "max31343-sqw",
> + },
> +};
> +
> +static const u32 max313xx_trickle_ohms[] = { 3000, 6000, 11000 };
> +
> +static bool max313xx_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + const struct chip_desc *chip = rtc->chip;
> +
> + /* time keeping registers */
> + if (reg >= chip->sec_reg && reg < chip->sec_reg + MAX313XX_TIME_SIZE)
> + return true;
> +
> + /* interrupt status register */
> + if (reg == chip->int_status_reg)
> + return true;
> +
> + /* temperature registers */
> + return chip->temp_reg &&
> + (reg == chip->temp_reg || reg == chip->temp_reg + 1);
> +}
> +
> +static const struct regmap_config regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = max313xx_volatile_reg,
> +};
> +
> +static int max313xx_get_hour(u8 hour_reg)
> +{
> + int hour;
> +
> + /* 24Hr mode */
> + if (!FIELD_GET(MAX313XX_HRS_F_12_24, hour_reg))
> + return bcd2bin(hour_reg & 0x3f);
> +
> + /* 12Hr mode */
> + hour = bcd2bin(hour_reg & 0x1f);
> + if (hour == 12)
> + hour = 0;
> +
> + if (FIELD_GET(MAX313XX_HRS_F_AM_PM, hour_reg))
> + hour += 12;
> +
> + return hour;
> +}
> +
> +static int max313xx_read_time(struct device *dev, struct rtc_time *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + u8 regs[7];
> + int ret;
> +
> + ret = regmap_bulk_read(rtc->regmap, rtc->chip->sec_reg, regs, 7);
> + if (ret)
> + return ret;
> +
> + t->tm_sec = bcd2bin(regs[0] & 0x7f);
> + t->tm_min = bcd2bin(regs[1] & 0x7f);
> + t->tm_hour = max313xx_get_hour(regs[2]);
> + t->tm_wday = bcd2bin(regs[3] & 0x07) - 1;
> + t->tm_mday = bcd2bin(regs[4] & 0x3f);
> + t->tm_mon = bcd2bin(regs[5] & 0x1f) - 1;
> + t->tm_year = bcd2bin(regs[6]) + 100;
> +
> + if (FIELD_GET(MAX313XX_MONTH_CENTURY, regs[5]))
> + t->tm_year += 100;
> +
> + return 0;
> +}
> +
> +static int max313xx_set_time(struct device *dev, struct rtc_time *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + u8 regs[7];
> + int ret;
> +
> + regs[0] = bin2bcd(t->tm_sec);
> + regs[1] = bin2bcd(t->tm_min);
> + regs[2] = bin2bcd(t->tm_hour);
> + regs[3] = bin2bcd(t->tm_wday + 1);
> + regs[4] = bin2bcd(t->tm_mday);
> + regs[5] = bin2bcd(t->tm_mon + 1);
> + regs[6] = bin2bcd(t->tm_year % 100);
> +
> + if (t->tm_year >= 200)
> + regs[5] |= FIELD_PREP(MAX313XX_MONTH_CENTURY, 1);
> +
> + /* Clkin needs to be disabled before setting time. */
> + if (rtc->clkin) {
> + switch (rtc->id) {
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_clear_bits(rtc->regmap,
> + MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> + break;
> + default:
> + ret = 0;
> + }
> + if (ret)
> + return ret;
> + }
> +
> + ret = regmap_bulk_write(rtc->regmap, rtc->chip->sec_reg, regs, 7);
> + if (ret)
> + return ret;
> +
> + switch (rtc->id) {
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_set_bits(rtc->regmap, MAX3134X_CFG2_REG,
> + MAX3134X_CFG2_SET_RTC);
> + if (ret)
> + return ret;
> +
> + fsleep(10000);
> +
> + ret = regmap_clear_bits(rtc->regmap, MAX3134X_CFG2_REG,
> + MAX3134X_CFG2_SET_RTC);
> + if (ret)
> + return ret;
> +
> + if (rtc->clkin)
> + ret = regmap_set_bits(rtc->regmap,
> + MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> +
> + break;
> + default:
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static int max313xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + unsigned int status, int_en;
> + struct rtc_time time;
> + u8 regs[6];
> + int ret;
> +
> + ret = regmap_bulk_read(rtc->regmap, rtc->chip->alarm1_sec_reg, regs,
> + sizeof(regs));
> + if (ret)
> + return ret;
> +
> + t->time.tm_sec = bcd2bin(regs[0] & 0x7f);
> + t->time.tm_min = bcd2bin(regs[1] & 0x7f);
> + t->time.tm_hour = bcd2bin(regs[2] & 0x3f);
> + t->time.tm_mday = bcd2bin(regs[3] & 0x3f);
> + t->time.tm_mon = bcd2bin(regs[4] & 0x1f) - 1;
> + t->time.tm_year = bcd2bin(regs[5]) + 100;
> +
> + ret = max313xx_read_time(dev, &time);
> + if (ret)
> + return ret;
> +
> + if (time.tm_year >= 200)
> + t->time.tm_year += 100;
> +
> + ret = regmap_read(rtc->regmap, rtc->chip->int_status_reg, &status);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(rtc->regmap, rtc->chip->int_en_reg, &int_en);
> + if (ret)
> + return ret;
> +
> + t->enabled = FIELD_GET(MAX313XX_INT_ALARM1, int_en);
> + t->pending = FIELD_GET(MAX313XX_INT_ALARM1, status);
> +
> + return 0;
> +}
> +
> +static int max313xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + unsigned int reg;
> + u8 regs[6];
> + int ret;
> +
> + regs[0] = bin2bcd(t->time.tm_sec);
> + regs[1] = bin2bcd(t->time.tm_min);
> + regs[2] = bin2bcd(t->time.tm_hour);
> + regs[3] = bin2bcd(t->time.tm_mday);
> + regs[4] = bin2bcd(t->time.tm_mon + 1);
> + regs[5] = bin2bcd(t->time.tm_year % 100);
> +
> + ret = regmap_bulk_write(rtc->regmap, rtc->chip->alarm1_sec_reg, regs,
> + sizeof(regs));
> + if (ret)
> + return ret;
> +
> + reg = FIELD_PREP(MAX313XX_INT_ALARM1, t->enabled);
> + ret = regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
> + MAX313XX_INT_ALARM1 | MAX313XX_INT_ALARM2,
> + reg);
> + if (ret)
> + return ret;
> +
> + /* Clear status register */
> + return regmap_read(rtc->regmap, rtc->chip->int_status_reg, ®);
> +}
> +
> +static int max313xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> +
> + return regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
> + MAX313XX_INT_ALARM1,
> + FIELD_PREP(MAX313XX_INT_ALARM1, enabled));
> +}
> +
> +static const struct rtc_class_ops max3133x_rtc_ops = {
> + .read_time = max313xx_read_time,
> + .set_time = max313xx_set_time,
> + .read_alarm = max313xx_read_alarm,
> + .set_alarm = max313xx_set_alarm,
> + .alarm_irq_enable = max313xx_alarm_irq_enable,
> +};
> +
> +static irqreturn_t max313xx_irq(int irq, void *dev_id)
> +{
> + struct max313xx *rtc = dev_id;
> + struct mutex *lock = &rtc->rtc->ops_lock;
> + int stat, ret;
> +
> + mutex_lock(lock);
> + ret = regmap_read(rtc->regmap, rtc->chip->int_status_reg, &stat);
> + if (ret)
> + goto out;
> +
> + if (FIELD_GET(MAX313XX_INT_ALARM1, stat)) {
> + ret = regmap_update_bits(rtc->regmap, rtc->chip->int_en_reg,
> + MAX313XX_INT_ALARM1, 0);
> + if (ret)
> + goto out;
> +
> + rtc_update_irq(rtc->rtc, 1, RTC_AF | RTC_IRQF);
> + }
> +
> +out:
> + mutex_unlock(lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int max313xx_nvmem_reg_read(void *priv, unsigned int offset,
> + void *val, size_t bytes)
> +{
> + struct max313xx *rtc = priv;
> + unsigned int reg = rtc->chip->ram_reg + offset;
> +
> + return regmap_bulk_read(rtc->regmap, reg, val, bytes);
> +}
> +
> +static int max313xx_nvmem_reg_write(void *priv, unsigned int offset,
> + void *val, size_t bytes)
> +{
> + struct max313xx *rtc = priv;
> + unsigned int reg = rtc->chip->ram_reg + offset;
> +
> + return regmap_bulk_write(rtc->regmap, reg, val, bytes);
> +}
> +
> +struct nvmem_config max313xx_nvmem_cfg = {
> + .reg_read = max313xx_nvmem_reg_read,
> + .reg_write = max313xx_nvmem_reg_write,
> + .word_size = 8,
> +};
> +
> +static unsigned long max313xx_clkout_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + const struct clkout_cfg *clkout = rtc->chip->clkout;
> + unsigned int freq_mask;
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(rtc->regmap, clkout->reg, ®);
> + if (ret)
> + return 0;
> +
> + freq_mask = __roundup_pow_of_two(clkout->freq_size) - 1;
> +
> + return clkout->freq_avail[(reg >> clkout->freq_pos) & freq_mask];
> +}
> +
> +static long max313xx_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *prate)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> + int index;
> +
> + index = find_closest(rate, clkout->freq_avail, clkout->freq_size);
> + return clkout->freq_avail[index];
> +}
> +
> +static int max313xx_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> + unsigned int freq_mask;
> + int index;
> +
> + index = find_closest(rate, clkout->freq_avail, clkout->freq_size);
> + freq_mask = __roundup_pow_of_two(clkout->freq_size) - 1;
> +
> + return regmap_update_bits(rtc->regmap, clkout->reg,
> + freq_mask << clkout->freq_pos,
> + index << clkout->freq_pos);
> +}
> +
> +static int max313xx_clkout_enable(struct clk_hw *hw)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> +
> + if (clkout->en_invert)
> + return regmap_clear_bits(rtc->regmap, clkout->reg,
> + clkout->en_bit);
> +
> + return regmap_set_bits(rtc->regmap, clkout->reg, clkout->en_bit);
> +}
> +
> +static void max313xx_clkout_disable(struct clk_hw *hw)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> +
> + switch (rtc->id) {
> + case ID_MAX31331:
> + case ID_MAX31334:
> + if (rtc->irq > 0) {
> + dev_err(rtc->rtc->dev.parent,
> + "clkout cannot be disabled when IRQ is requested");
> + return;
> + }
> + break;
> + default:
> + break;
> + }
> +
> + if (clkout->en_invert)
> + regmap_set_bits(rtc->regmap, clkout->reg, clkout->en_bit);
> + else
> + regmap_clear_bits(rtc->regmap, clkout->reg, clkout->en_bit);
> +}
> +
> +static int max313xx_clkout_is_enabled(struct clk_hw *hw)
> +{
> + struct max313xx *rtc = clk_hw_to_max313xx(hw);
> + struct clkout_cfg *clkout = rtc->chip->clkout;
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(rtc->regmap, clkout->reg, ®);
> + if (ret)
> + return ret;
> +
> + return !!(reg & clkout->en_bit) ^ clkout->en_invert;
> +}
> +
> +static const struct clk_ops max313xx_clkout_ops = {
> + .recalc_rate = max313xx_clkout_recalc_rate,
> + .round_rate = max313xx_clkout_round_rate,
> + .set_rate = max313xx_clkout_set_rate,
> + .enable = max313xx_clkout_enable,
> + .disable = max313xx_clkout_disable,
> + .is_enabled = max313xx_clkout_is_enabled,
> +};
> +
> +struct clk_init_data max313xx_clk_init = {
> + .name = "max313xx-clkout",
> + .ops = &max313xx_clkout_ops,
> +};
> +
> +static int max313xx_read_temp(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + struct chip_desc desc = chip[rtc->id];
> + u8 reg[2];
> + s16 temp;
> + int ret;
> +
> + if (type != hwmon_temp || attr != hwmon_temp_input)
> + return -EOPNOTSUPP;
> +
> + ret = regmap_bulk_read(rtc->regmap, desc.temp_reg, reg, 2);
> + if (ret)
> + return ret;
> +
> + temp = get_unaligned_be16(reg);
> +
> + *val = (temp / 64) * 250;
> +
> + return 0;
> +}
> +
> +static umode_t max313xx_is_visible(const void *data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + if (type == hwmon_temp && attr == hwmon_temp_input)
> + return 0444;
> +
> + return 0;
> +}
> +
> +static const struct hwmon_channel_info *max313xx_info[] = {
> + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
> + NULL
> +};
> +
> +static const struct hwmon_ops max313xx_hwmon_ops = {
> + .is_visible = max313xx_is_visible,
> + .read = max313xx_read_temp,
> +};
> +
> +static const struct hwmon_chip_info max313xx_chip_info = {
> + .ops = &max313xx_hwmon_ops,
> + .info = max313xx_info,
> +};
> +
> +static int max313xx_init(struct max313xx *rtc)
> +{
> + int ret;
> +
> + switch (rtc->id) {
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_clear_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_OSC_DISABLE);
> + if (ret)
> + return ret;
> +
> + return regmap_set_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_SWRST);
> + default:
> + return 0;
> + }
> +}
> +
> +static int max313xx_clkout_register(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + int ret;
> +
> + if (!device_property_present(dev, "#clock-cells"))
> + return 0;
> +
> + max313xx_clk_init.name = rtc->chip->clkout_name;
> + device_property_read_string(dev, "clock-output-names",
> + &max313xx_clk_init.name);
> + rtc->clkout.init = &max313xx_clk_init;
> +
> + ret = devm_clk_hw_register(dev, &rtc->clkout);
> + if (ret)
> + return dev_err_probe(dev, ret, "cannot register clock\n");
> +
> + return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
> + rtc->clkout.clk);
> +}
> +
> +static int max313xx_trickle_charger_setup(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool diode_disable;
> + int index, reg;
> + u32 ohms = 0;
> + int ret;
> +
> + device_property_read_u32(dev, "trickle-resistor-ohms", &ohms);
> + if (!ohms)
> + return 0;
> +
> + diode_disable = device_property_read_bool(dev, "trickle-diode-disable");
> +
> + if (!rtc->chip->trickle_reg) {
> + dev_warn(dev, "device does not have trickle charger\n");
> + return 0;
> + }
> +
> + index = find_closest(ohms, max313xx_trickle_ohms,
> + ARRAY_SIZE(max313xx_trickle_ohms)) + 1;
> +
> + switch (rtc->id) {
> + case ID_MAX31329:
> + reg = FIELD_PREP(MAX31329_TRICKLE_ENABLE_BIT, 1) |
> + FIELD_PREP(MAX31329_43_TRICKLE_RES_MASK, index) |
> + FIELD_PREP(MAX31329_43_TRICKLE_DIODE_EN, !diode_disable);
> + break;
> + case ID_MAX31331:
> + case ID_MAX31334:
> + reg = FIELD_PREP(MAX3133X_TRICKLE_ENABLE_BIT, 1) |
> + FIELD_PREP(MAX3133X_TRICKLE_DIODE_EN, !diode_disable) |
> + FIELD_PREP(MAX3133X_TRICKLE_RES_MASK, index);
> + break;
> + case ID_MAX31341:
> + if (index == 1)
> + index = 0;
> + reg = FIELD_PREP(MAX31341_TRICKLE_ENABLE_BIT, 1) |
> + FIELD_PREP(MAX31341_TRICKLE_DIODE_EN, !diode_disable) |
> + FIELD_PREP(MAX31341_TRICKLE_RES_MASK, index);
> +
> + ret = regmap_set_bits(rtc->regmap, MAX31341_POWER_MGMT_REG,
> + MAX31341_POWER_MGMT_TRICKLE_BIT);
> + if (ret)
> + return ret;
> +
> + break;
> + case ID_MAX31343:
> + reg = FIELD_PREP(MAX31329_43_TRICKLE_RES_MASK, index) |
> + FIELD_PREP(MAX31329_43_TRICKLE_DIODE_EN, !diode_disable) |
> + FIELD_PREP(MAX31343_TRICKLE_ENABLE_MASK,
> + MAX31343_TRICKLE_ENABLE_CODE);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return regmap_write(rtc->regmap, rtc->chip->trickle_reg, reg);
> +}
> +
> +static int max313xx_find_clkin_freq_index(struct clk *clk)
> +{
> + unsigned long rate = clk_get_rate(clk);
> + int freq;
> + int i;
> +
> + i = find_closest(rate, max313xx_clkin_freq,
> + ARRAY_SIZE(max313xx_clkin_freq));
> + if (max313xx_clkin_freq[i] == rate)
> + return i;
> +
> + for (i = ARRAY_SIZE(max313xx_clkin_freq) - 1; i >= 0; i--) {
> + freq = max313xx_clkin_freq[i];
> + if (freq == clk_round_rate(clk, freq))
> + return i;
> + }
> +
> + /* supplied clock cannot produce one of desired frequency rate */
> + return -ENODEV;
> +}
> +
> +static int max313xx_clkin_init(struct device *dev)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + int rate;
> + int ret;
> +
> + rtc->clkin = devm_clk_get_enabled(dev, NULL);
> + if (IS_ERR(rtc->clkin)) {
> + if (PTR_ERR(rtc->clkin) == -ENOENT)
> + rtc->clkin = NULL;
> + else
> + return dev_err_probe(dev, PTR_ERR(rtc->clkin),
> + "error while clkin setup\n");
> + }
> +
> + if (!rtc->clkin) {
> + switch (rtc->id) {
> + case ID_MAX31329:
> + return regmap_clear_bits(rtc->regmap,
> + MAX31329_CONFIG2_REG,
> + MAX31329_CONFIG2_CLKIN_EN);
> + case ID_MAX31341:
> + case ID_MAX31342:
> + return regmap_clear_bits(rtc->regmap,
> + MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> + default:
> + return 0;
> + }
> + }
> +
> + rate = max313xx_find_clkin_freq_index(rtc->clkin);
> + if (rate < 0)
> + return dev_err_probe(dev, rate,
> + "clkin cannot produce required frequency\n");
> +
> + ret = clk_set_rate(rtc->clkin, max313xx_clkin_freq[rate]);
> + if (ret)
> + return ret;
> +
> + switch (rtc->id) {
> + case ID_MAX31329:
> + ret = regmap_update_bits(rtc->regmap, MAX31329_CONFIG2_REG,
> + MAX31329_CONFIG2_CLKIN_FREQ, rate);
> + if (ret)
> + return ret;
> +
> + return regmap_set_bits(rtc->regmap, MAX31329_CONFIG2_REG,
> + MAX31329_CONFIG2_CLKIN_EN);
> + case ID_MAX31341:
> + case ID_MAX31342:
> + ret = regmap_update_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_FREQ,
> + FIELD_PREP(MAX31341_42_CONFIG1_CLKIN_FREQ, rate));
> + if (ret)
> + return ret;
> +
> + return regmap_set_bits(rtc->regmap, MAX31341_42_CONFIG1_REG,
> + MAX31341_42_CONFIG1_CLKIN_EN);
> + default:
> + rtc->clkin = NULL;
> + dev_warn(dev, "device does not have clock input\n");
> + return 0;
> + }
> +}
> +
> +static int max313xx_irq_init(struct device *dev, const char *devname)
> +{
> + struct max313xx *rtc = dev_get_drvdata(dev);
> + bool wakeup;
> + int ret;
> +
> + rtc->irq = rtc->irqs[0];
> +
> + switch (rtc->id) {
> + case ID_MAX31328:
> + /* max31328 sqw ant int pin is shared */
> + if (rtc->id == ID_MAX31328 && rtc->irq > 0 && rtc->clkout.clk)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "cannot have both sqw clock output and irq enabled");
> +
> + break;
> + case ID_MAX31331:
> + case ID_MAX31334:
> + if (rtc->clkout.clk) {
> + /* clockout needs to be enabled for using INTA pin */
> + ret = clk_prepare_enable(rtc->clkout.clk);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "cannot enable clkout\n");
> + } else {
> + rtc->irq = rtc->irqs[1];
> + }
> + break;
> + default:
> + if (rtc->clkin) {
> + rtc->irq = rtc->irqs[1];
> +
> + /* wrong interrupt specified */
> + if (rtc->irqs[0] > 0 && rtc->irqs[1] <= 0)
> + dev_warn(dev, "INTA is specified but INTB required for irq when clkin is enabled\n");
> +
> + if (rtc->clkout.clk && rtc->irq > 0)
> + return dev_err_probe(dev, -EOPNOTSUPP,
> + "irq not possible when both clkin and clkout are configured\n");
> +
> + if (rtc->irq <= 0)
> + break;
> +
> + /* clkout needs to be disabled for using INTB pin */
> + if (rtc->chip->clkout->en_invert)
> + ret = regmap_set_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> + else
> + ret = regmap_clear_bits(rtc->regmap,
> + rtc->chip->clkout->reg,
> + rtc->chip->clkout->en_bit);
> +
> + if (ret)
> + return ret;
> + }
> + break;
> + }
> +
> + if (rtc->irq > 0) {
> + ret = devm_request_threaded_irq(dev, rtc->irq, NULL,
> + &max313xx_irq, IRQF_ONESHOT,
> + devname, rtc);
> + if (ret)
> + return ret;
> +
> + wakeup = device_property_read_bool(dev, "wakeup-source");
> + return device_init_wakeup(dev, wakeup);
> + }
> +
> + __clear_bit(RTC_FEATURE_ALARM, rtc->rtc->features);
> +
> + return 0;
> +}
> +
> +static int max313xx_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct max313xx *max313xx;
> + struct device *hwmon;
> + const void *match;
> + int ret;
> +
> + max313xx = devm_kzalloc(&client->dev, sizeof(*max313xx), GFP_KERNEL);
> + if (!max313xx)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&client->dev, max313xx);
> +
> + max313xx->regmap = devm_regmap_init_i2c(client, ®map_config);
> + if (IS_ERR(max313xx->regmap)) {
> + return dev_err_probe(dev, PTR_ERR(max313xx->regmap),
> + "regmap init failed\n");
> + }
> +
> + i2c_set_clientdata(client, max313xx);
> +
> + match = device_get_match_data(dev);
> + if (match)
> + max313xx->id = (enum max313xx_ids)match;
> + else if (id)
> + max313xx->id = id->driver_data;
> + else
> + return -ENODEV;
> +
> + max313xx->chip = &chip[max313xx->id];
> +
> + ret = max313xx_init(max313xx);
> + if (ret)
> + return ret;
> +
> + max313xx->rtc = devm_rtc_allocate_device(dev);
> + if (IS_ERR(max313xx->rtc))
> + return PTR_ERR(max313xx->rtc);
> +
> + max313xx->rtc->ops = &max3133x_rtc_ops;
> + max313xx->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
> + max313xx->rtc->range_max = RTC_TIMESTAMP_END_2199;
> +
> + ret = devm_rtc_register_device(max313xx->rtc);
> + if (ret)
> + return ret;
> +
> + switch (max313xx->id) {
> + case ID_MAX31328:
> + case ID_MAX31343:
> + max313xx->irqs[0] = client->irq;
> + break;
> + default:
> + max313xx->irqs[0] = fwnode_irq_get_byname(dev_fwnode(dev), "INTA");
> + max313xx->irqs[1] = fwnode_irq_get_byname(dev_fwnode(dev), "INTB");
> + if (max313xx->irqs[0] <= 0 && max313xx->irqs[1] <= 0 && client->irq)
> + return dev_err_probe(dev, -ENOENT,
> + "interrupt requested but no interrupt name specified\n");
> +
> + break;
> + }
> +
> + ret = max313xx_clkout_register(dev);
> + if (ret)
> + return ret;
> +
> + ret = max313xx_clkin_init(dev);
> + if (ret)
> + return ret;
> +
> + /* IRQ wiring depends on the clock configuration so parse them first */
> + ret = max313xx_irq_init(dev, client->name);
> + if (ret)
> + return ret;
> +
> + if (max313xx->chip->ram_size) {
> + max313xx_nvmem_cfg.size = max313xx->chip->ram_size;
> + max313xx_nvmem_cfg.priv = max313xx;
> +
> + ret = devm_rtc_nvmem_register(max313xx->rtc, &max313xx_nvmem_cfg);
> + if (ret)
> + dev_warn(dev, "cannot register rtc nvmem\n");
> + }
> +
> + if (max313xx->chip->temp_reg) {
> + hwmon = devm_hwmon_device_register_with_info(dev, client->name,
> + max313xx,
> + &max313xx_chip_info,
> + NULL);
> + if (IS_ERR(hwmon))
> + dev_warn(dev, "cannot register hwmon device: %li\n",
> + PTR_ERR(hwmon));
> + }
> +
> + return max313xx_trickle_charger_setup(dev);
> +}
> +
> +static const struct of_device_id max313xx_of_id[] = {
> + { .compatible = "adi,max31328", .data = (void *)ID_MAX31328 },
> + { .compatible = "adi,max31329", .data = (void *)ID_MAX31329 },
> + { .compatible = "adi,max31331", .data = (void *)ID_MAX31331 },
> + { .compatible = "adi,max31334", .data = (void *)ID_MAX31334 },
> + { .compatible = "adi,max31341", .data = (void *)ID_MAX31341 },
> + { .compatible = "adi,max31342", .data = (void *)ID_MAX31342 },
> + { .compatible = "adi,max31343", .data = (void *)ID_MAX31343 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, max313xx_of_id);
> +
> +static const struct i2c_device_id max313xx_id[] = {
> + { "max31328", ID_MAX31328 },
> + { "max31329", ID_MAX31329 },
> + { "max31331", ID_MAX31331 },
> + { "max31334", ID_MAX31334 },
> + { "max31341", ID_MAX31341 },
> + { "max31342", ID_MAX31342 },
> + { "max31343", ID_MAX31343 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, max313xx_id);
> +
> +static struct i2c_driver max313xx_driver = {
> + .driver = {
> + .name = "rtc-max313xx",
> + .of_match_table = max313xx_of_id,
> + },
> + .probe = max313xx_probe,
> + .id_table = max313xx_id,
> +};
> +module_i2c_driver(max313xx_driver);
> +
> +MODULE_DESCRIPTION("Analog Devices MAX313XX RTCs");
> +MODULE_AUTHOR("Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>");
> +MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@analog.com>");
> +MODULE_SOFTDEP("pre: regmap-i2c");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION("1.0");
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-02-14 20:28 ` Chris Packham
@ 2023-02-14 21:40 ` Alexandre Belloni
2023-02-14 22:36 ` Chris Packham
2023-02-17 15:17 ` Tilki, Ibrahim
1 sibling, 1 reply; 15+ messages in thread
From: Alexandre Belloni @ 2023-02-14 21:40 UTC (permalink / raw)
To: Chris Packham
Cc: Ibrahim Tilki, a.zummo, jdelvare, linux, robh+dt,
krzysztof.kozlowski+dt, linux-rtc, linux-kernel, linux-hwmon,
devicetree, Zeynep Arslanbenzer
On 14/02/2023 20:28:05+0000, Chris Packham wrote:
> Hi Ibrahim,
>
> On 9/11/22 01:22, Ibrahim Tilki wrote:
> > Adding support for Analog Devices MAX313XX series RTCs.
> >
> > Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
> > Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
> > ---
> > drivers/rtc/Kconfig | 11 +
> > drivers/rtc/Makefile | 1 +
> > drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
> > 3 files changed, 1082 insertions(+)
> > create mode 100644 drivers/rtc/rtc-max313xx.c
>
> What is the current state of this work? I see there are some comments on
> this v3 iteration from late last year and I couldn't find any newer
> iteration on any mailing list. We've got some new hardware arriving soon
> that will have the MAX31331 RTC and I'm keen to see this patch series
> land. Is there anything I can do to help it along? I can't be very
> specific about when I'll see the new hardware (who can these days), the
> last update was "boards are due in March".
>
> For the maintainers on the Cc list once the dust settles how would I get
> this supported in a LTS kernel (we're currently using the 5.15 series)?
> Or is totally out of the question because it's not just a new device id?
This will not happen, you will have to update to the next LTS (which you
should do anyway)
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-02-14 21:40 ` Alexandre Belloni
@ 2023-02-14 22:36 ` Chris Packham
0 siblings, 0 replies; 15+ messages in thread
From: Chris Packham @ 2023-02-14 22:36 UTC (permalink / raw)
To: Alexandre Belloni
Cc: Ibrahim Tilki, a.zummo, jdelvare, linux, robh+dt,
krzysztof.kozlowski+dt, linux-rtc, linux-kernel, linux-hwmon,
devicetree, Zeynep Arslanbenzer
On 15/02/23 10:40, Alexandre Belloni wrote:
> On 14/02/2023 20:28:05+0000, Chris Packham wrote:
>> Hi Ibrahim,
>>
>> On 9/11/22 01:22, Ibrahim Tilki wrote:
>>> Adding support for Analog Devices MAX313XX series RTCs.
>>>
>>> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
>>> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
>>> ---
>>> drivers/rtc/Kconfig | 11 +
>>> drivers/rtc/Makefile | 1 +
>>> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 1082 insertions(+)
>>> create mode 100644 drivers/rtc/rtc-max313xx.c
>> What is the current state of this work? I see there are some comments on
>> this v3 iteration from late last year and I couldn't find any newer
>> iteration on any mailing list. We've got some new hardware arriving soon
>> that will have the MAX31331 RTC and I'm keen to see this patch series
>> land. Is there anything I can do to help it along? I can't be very
>> specific about when I'll see the new hardware (who can these days), the
>> last update was "boards are due in March".
>>
>> For the maintainers on the Cc list once the dust settles how would I get
>> this supported in a LTS kernel (we're currently using the 5.15 series)?
>> Or is totally out of the question because it's not just a new device id?
> This will not happen, you will have to update to the next LTS (which you
> should do anyway)
I was afraid that was going to be the answer. We'll have to carry it as
a local patch until there is a LTS version with the driver support we
need in it.
^ permalink raw reply [flat|nested] 15+ messages in thread
* RE: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-02-14 20:28 ` Chris Packham
2023-02-14 21:40 ` Alexandre Belloni
@ 2023-02-17 15:17 ` Tilki, Ibrahim
2023-02-19 20:19 ` Chris Packham
2023-03-13 2:15 ` Chris Packham
1 sibling, 2 replies; 15+ messages in thread
From: Tilki, Ibrahim @ 2023-02-17 15:17 UTC (permalink / raw)
To: Chris Packham, a.zummo, alexandre.belloni, jdelvare, linux,
robh+dt, krzysztof.kozlowski+dt
Cc: linux-rtc, linux-kernel, linux-hwmon, devicetree, Arslanbenzer, Zeynep
> Hi Ibrahim,
>
> On 9/11/22 01:22, Ibrahim Tilki wrote:
> > Adding support for Analog Devices MAX313XX series RTCs.
> >
> > Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
> > Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
> > ---
> > drivers/rtc/Kconfig | 11 +
> > drivers/rtc/Makefile | 1 +
> > drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
> > 3 files changed, 1082 insertions(+)
> > create mode 100644 drivers/rtc/rtc-max313xx.c
>
> What is the current state of this work? I see there are some comments on
> this v3 iteration from late last year and I couldn't find any newer
> iteration on any mailing list. We've got some new hardware arriving soon
> that will have the MAX31331 RTC and I'm keen to see this patch series
> land. Is there anything I can do to help it along? I can't be very
> specific about when I'll see the new hardware (who can these days), the
> last update was "boards are due in March".
>
> For the maintainers on the Cc list once the dust settles how would I get
> this supported in a LTS kernel (we're currently using the 5.15 series)?
> Or is totally out of the question because it's not just a new device id?
Hi Chris,
Patch v4 is on the way, I will be sending it in a few weeks.
It is hard to tell when it is going to land but I expect to be more responsive
to reviews after patch v4.
Ibrahim
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-02-17 15:17 ` Tilki, Ibrahim
@ 2023-02-19 20:19 ` Chris Packham
2023-03-13 2:15 ` Chris Packham
1 sibling, 0 replies; 15+ messages in thread
From: Chris Packham @ 2023-02-19 20:19 UTC (permalink / raw)
To: Tilki, Ibrahim, a.zummo, alexandre.belloni, jdelvare, linux,
robh+dt, krzysztof.kozlowski+dt
Cc: linux-rtc, linux-kernel, linux-hwmon, devicetree, Arslanbenzer, Zeynep
On 18/02/23 04:17, Tilki, Ibrahim wrote:
>> Hi Ibrahim,
>>
>> On 9/11/22 01:22, Ibrahim Tilki wrote:
>>> Adding support for Analog Devices MAX313XX series RTCs.
>>>
>>> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
>>> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
>>> ---
>>> drivers/rtc/Kconfig | 11 +
>>> drivers/rtc/Makefile | 1 +
>>> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 1082 insertions(+)
>>> create mode 100644 drivers/rtc/rtc-max313xx.c
>> What is the current state of this work? I see there are some comments on
>> this v3 iteration from late last year and I couldn't find any newer
>> iteration on any mailing list. We've got some new hardware arriving soon
>> that will have the MAX31331 RTC and I'm keen to see this patch series
>> land. Is there anything I can do to help it along? I can't be very
>> specific about when I'll see the new hardware (who can these days), the
>> last update was "boards are due in March".
>>
>> For the maintainers on the Cc list once the dust settles how would I get
>> this supported in a LTS kernel (we're currently using the 5.15 series)?
>> Or is totally out of the question because it's not just a new device id?
> Hi Chris,
>
> Patch v4 is on the way, I will be sending it in a few weeks.
> It is hard to tell when it is going to land but I expect to be more responsive
> to reviews after patch v4.
Great thanks. I'll keep an eye out for it.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-02-17 15:17 ` Tilki, Ibrahim
2023-02-19 20:19 ` Chris Packham
@ 2023-03-13 2:15 ` Chris Packham
2023-03-13 2:20 ` Alexandre Belloni
1 sibling, 1 reply; 15+ messages in thread
From: Chris Packham @ 2023-03-13 2:15 UTC (permalink / raw)
To: Tilki, Ibrahim, a.zummo, alexandre.belloni, jdelvare, linux,
robh+dt, krzysztof.kozlowski+dt
Cc: linux-rtc, linux-kernel, linux-hwmon, devicetree, Arslanbenzer, Zeynep
Hi Ibrahim,
On 18/02/23 04:17, Tilki, Ibrahim wrote:
>> Hi Ibrahim,
>>
>> On 9/11/22 01:22, Ibrahim Tilki wrote:
>>> Adding support for Analog Devices MAX313XX series RTCs.
>>>
>>> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
>>> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
>>> ---
>>> drivers/rtc/Kconfig | 11 +
>>> drivers/rtc/Makefile | 1 +
>>> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 1082 insertions(+)
>>> create mode 100644 drivers/rtc/rtc-max313xx.c
>> What is the current state of this work? I see there are some comments on
>> this v3 iteration from late last year and I couldn't find any newer
>> iteration on any mailing list. We've got some new hardware arriving soon
>> that will have the MAX31331 RTC and I'm keen to see this patch series
>> land. Is there anything I can do to help it along? I can't be very
>> specific about when I'll see the new hardware (who can these days), the
>> last update was "boards are due in March".
>>
>> For the maintainers on the Cc list once the dust settles how would I get
>> this supported in a LTS kernel (we're currently using the 5.15 series)?
>> Or is totally out of the question because it's not just a new device id?
> Hi Chris,
>
> Patch v4 is on the way, I will be sending it in a few weeks.
> It is hard to tell when it is going to land but I expect to be more responsive
> to reviews after patch v4.
FYI I've now got some boards with a MAX31331. I've given v3 a quick test
and it works for me.
Are you also looking at a u-boot driver? If not I can port your driver
across reasonably easily.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-03-13 2:15 ` Chris Packham
@ 2023-03-13 2:20 ` Alexandre Belloni
2023-03-13 2:30 ` Chris Packham
0 siblings, 1 reply; 15+ messages in thread
From: Alexandre Belloni @ 2023-03-13 2:20 UTC (permalink / raw)
To: Chris Packham
Cc: Tilki, Ibrahim, a.zummo, jdelvare, linux, robh+dt,
krzysztof.kozlowski+dt, linux-rtc, linux-kernel, linux-hwmon,
devicetree, Arslanbenzer, Zeynep
Hello,
On 13/03/2023 02:15:26+0000, Chris Packham wrote:
> Hi Ibrahim,
>
> On 18/02/23 04:17, Tilki, Ibrahim wrote:
> >> Hi Ibrahim,
> >>
> >> On 9/11/22 01:22, Ibrahim Tilki wrote:
> >>> Adding support for Analog Devices MAX313XX series RTCs.
> >>>
> >>> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
> >>> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
> >>> ---
> >>> drivers/rtc/Kconfig | 11 +
> >>> drivers/rtc/Makefile | 1 +
> >>> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
> >>> 3 files changed, 1082 insertions(+)
> >>> create mode 100644 drivers/rtc/rtc-max313xx.c
> >> What is the current state of this work? I see there are some comments on
> >> this v3 iteration from late last year and I couldn't find any newer
> >> iteration on any mailing list. We've got some new hardware arriving soon
> >> that will have the MAX31331 RTC and I'm keen to see this patch series
> >> land. Is there anything I can do to help it along? I can't be very
> >> specific about when I'll see the new hardware (who can these days), the
> >> last update was "boards are due in March".
> >>
> >> For the maintainers on the Cc list once the dust settles how would I get
> >> this supported in a LTS kernel (we're currently using the 5.15 series)?
> >> Or is totally out of the question because it's not just a new device id?
> > Hi Chris,
> >
> > Patch v4 is on the way, I will be sending it in a few weeks.
> > It is hard to tell when it is going to land but I expect to be more responsive
> > to reviews after patch v4.
>
> FYI I've now got some boards with a MAX31331. I've given v3 a quick test
> and it works for me.
>
> Are you also looking at a u-boot driver? If not I can port your driver
> across reasonably easily.
>
I'm curious why would you need an RTC driver for u-boot?
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 1/2] drivers: rtc: add max313xx series rtc driver
2023-03-13 2:20 ` Alexandre Belloni
@ 2023-03-13 2:30 ` Chris Packham
0 siblings, 0 replies; 15+ messages in thread
From: Chris Packham @ 2023-03-13 2:30 UTC (permalink / raw)
To: Alexandre Belloni
Cc: Tilki, Ibrahim, a.zummo, jdelvare, linux, robh+dt,
krzysztof.kozlowski+dt, linux-rtc, linux-kernel, linux-hwmon,
devicetree, Arslanbenzer, Zeynep
On 13/03/23 15:20, Alexandre Belloni wrote:
> Hello,
>
> On 13/03/2023 02:15:26+0000, Chris Packham wrote:
>> Hi Ibrahim,
>>
>> On 18/02/23 04:17, Tilki, Ibrahim wrote:
>>>> Hi Ibrahim,
>>>>
>>>> On 9/11/22 01:22, Ibrahim Tilki wrote:
>>>>> Adding support for Analog Devices MAX313XX series RTCs.
>>>>>
>>>>> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
>>>>> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
>>>>> ---
>>>>> drivers/rtc/Kconfig | 11 +
>>>>> drivers/rtc/Makefile | 1 +
>>>>> drivers/rtc/rtc-max313xx.c | 1070 ++++++++++++++++++++++++++++++++++++
>>>>> 3 files changed, 1082 insertions(+)
>>>>> create mode 100644 drivers/rtc/rtc-max313xx.c
>>>> What is the current state of this work? I see there are some comments on
>>>> this v3 iteration from late last year and I couldn't find any newer
>>>> iteration on any mailing list. We've got some new hardware arriving soon
>>>> that will have the MAX31331 RTC and I'm keen to see this patch series
>>>> land. Is there anything I can do to help it along? I can't be very
>>>> specific about when I'll see the new hardware (who can these days), the
>>>> last update was "boards are due in March".
>>>>
>>>> For the maintainers on the Cc list once the dust settles how would I get
>>>> this supported in a LTS kernel (we're currently using the 5.15 series)?
>>>> Or is totally out of the question because it's not just a new device id?
>>> Hi Chris,
>>>
>>> Patch v4 is on the way, I will be sending it in a few weeks.
>>> It is hard to tell when it is going to land but I expect to be more responsive
>>> to reviews after patch v4.
>> FYI I've now got some boards with a MAX31331. I've given v3 a quick test
>> and it works for me.
>>
>> Are you also looking at a u-boot driver? If not I can port your driver
>> across reasonably easily.
>>
> I'm curious why would you need an RTC driver for u-boot?
Short answer is because u-boot has RTC drivers and commands to set/read
them.
Slightly longer answer is that for our current products (most with a
DS1340 or something close) our initial manufacturing process includes
setting the RTC from u-boot. It's mostly a "because we've always done it
that way" but it does have the advantage that any logs or files created
on first boot get timestamped correctly. Yes we could set the clock from
userland on first boot but there would be a few odd log entries from
before the RTC was set.
^ permalink raw reply [flat|nested] 15+ messages in thread