[PATCH 4.9 00/30] 4.9.333-rc1 review

[PATCH 4.9 00/30] 4.9.333-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.333 release.
There are 30 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 10 Nov 2022 13:33:17 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.333-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.333-rc1

Dokyung Song <dokyung.song@gmail.com>
    wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker()

Maxim Levitsky <mlevitsk@redhat.com>
    KVM: x86: emulator: update the emulation mode after CR0 write

Maxim Levitsky <mlevitsk@redhat.com>
    KVM: x86: emulator: introduce emulator_recalc_and_set_mode

Maxim Levitsky <mlevitsk@redhat.com>
    KVM: x86: emulator: em_sysexit should update ctxt->mode

Jim Mattson <jmattson@google.com>
    KVM: x86: Mask off reserved bits in CPUID.80000008H

Ye Bin <yebin10@huawei.com>
    ext4: fix warning in 'ext4_da_release_space'

Helge Deller <deller@gmx.de>
    parisc: Export iosapic_serial_irq() symbol for serial port driver

Helge Deller <deller@gmx.de>
    parisc: Make 8250_gsc driver dependend on CONFIG_PARISC

John Veness <john-linux@pelago.org.uk>
    ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices

David Sterba <dsterba@suse.com>
    btrfs: fix type of parameter generation in btrfs_get_dentry

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: L2CAP: Fix attempting to access uninitialized memory

Martin Tůma <martin.tuma@digiteqautomotive.com>
    i2c: xiic: Add platform module alias

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: dvb-frontends/drxk: initialize err to 0

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: s5p_cec: limit msg.len to CEC_MAX_MSG_SIZE

Gaosheng Cui <cuigaosheng1@huawei.com>
    net: mdio: fix undefined behavior in bit shift for __mdiobus_register

Zhengchao Shao <shaozhengchao@huawei.com>
    Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()

Maxim Mikityanskiy <maxtram95@gmail.com>
    Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu

Filipe Manana <fdmanana@suse.com>
    btrfs: fix ulist leaks in error paths of qgroup self tests

Yang Yingliang <yangyingliang@huawei.com>
    isdn: mISDN: netjet: fix wrong check of device registration

Yang Yingliang <yangyingliang@huawei.com>
    mISDN: fix possible memory leak in mISDN_register_device()

Zhang Qilong <zhangqilong3@huawei.com>
    rose: Fix NULL pointer dereference in rose_send_frame()

Jason A. Donenfeld <Jason@zx2c4.com>
    ipvs: use explicitly signed chars

Dan Carpenter <dan.carpenter@oracle.com>
    net: sched: Fix use after free in red_enqueue()

Sergey Shtylyov <s.shtylyov@omp.ru>
    ata: pata_legacy: fix pdc20230_set_piomode()

Zhang Changzhong <zhangchangzhong@huawei.com>
    net: fec: fix improper use of NETDEV_TX_BUSY

Shang XiaoJing <shangxiaojing@huawei.com>
    nfc: nfcmrvl: Fix potential memory leak in nfcmrvl_i2c_nci_send()

Shang XiaoJing <shangxiaojing@huawei.com>
    nfc: s3fwrn5: Fix potential memory leak in s3fwrn5_nci_send()

Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
    nfs4: Fix kmemleak when allocate slot failed

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4.1: We must always send RECLAIM_COMPLETE after a reboot

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4.1: Handle RECLAIM_COMPLETE trunking errors


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/x86/kvm/cpuid.c                               |   1 +
 arch/x86/kvm/emulate.c                             | 102 +++++++++++++++------
 drivers/ata/pata_legacy.c                          |   5 +-
 drivers/i2c/busses/i2c-xiic.c                      |   1 +
 drivers/isdn/hardware/mISDN/netjet.c               |   2 +-
 drivers/isdn/mISDN/core.c                          |   5 +-
 drivers/media/dvb-frontends/drxk_hard.c            |   2 +-
 drivers/net/ethernet/freescale/fec_main.c          |   4 +-
 drivers/net/phy/mdio_bus.c                         |   2 +-
 .../wireless/broadcom/brcm80211/brcmfmac/fweh.c    |   4 +
 drivers/nfc/nfcmrvl/i2c.c                          |   7 +-
 drivers/nfc/s3fwrn5/core.c                         |   8 +-
 drivers/parisc/iosapic.c                           |   1 +
 drivers/staging/media/s5p-cec/s5p_cec.c            |   2 +
 drivers/tty/serial/8250/Kconfig                    |   2 +-
 fs/btrfs/export.c                                  |   2 +-
 fs/btrfs/export.h                                  |   2 +-
 fs/btrfs/tests/qgroup-tests.c                      |  20 +++-
 fs/ext4/migrate.c                                  |   3 +-
 fs/nfs/nfs4client.c                                |   1 +
 fs/nfs/nfs4state.c                                 |   2 +
 net/bluetooth/l2cap_core.c                         |  52 +++++++++--
 net/netfilter/ipvs/ip_vs_conn.c                    |   4 +-
 net/rose/rose_link.c                               |   3 +
 net/sched/sch_red.c                                |   4 +-
 sound/usb/quirks-table.h                           |  58 ++++++++++++
 sound/usb/quirks.c                                 |   1 +
 28 files changed, 241 insertions(+), 63 deletions(-)

[PATCH 4.9 01/30] NFSv4.1: Handle RECLAIM_COMPLETE trunking errors

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 5d917cba3201e5c25059df96c29252fd99c4f6a7 ]

If RECLAIM_COMPLETE sets the NFS4CLNT_BIND_CONN_TO_SESSION flag, then we
need to loop back in order to handle it.

Fixes: 0048fdd06614 ("NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4state.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 466c07bd0629..2df0a1be5974 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -2487,6 +2487,7 @@ static void nfs4_state_manager(struct nfs_client *clp)
 			if (status < 0)
 				goto out_error;
 			nfs4_state_end_reclaim_reboot(clp);
+			continue;
 		}
 
 		/* Detect expired delegations... */
-- 
2.35.1

[PATCH 4.9 02/30] NFSv4.1: We must always send RECLAIM_COMPLETE after a reboot

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit e59679f2b7e522ecad99974e5636291ffd47c184 ]

Currently, we are only guaranteed to send RECLAIM_COMPLETE if we have
open state to recover. Fix the client to always send RECLAIM_COMPLETE
after setting up the lease.

Fixes: fce5c838e133 ("nfs41: RECLAIM_COMPLETE functionality")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4state.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 2df0a1be5974..dcb2c8b4a14d 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -1656,6 +1656,7 @@ static void nfs4_state_mark_reclaim_helper(struct nfs_client *clp,
 
 static void nfs4_state_start_reclaim_reboot(struct nfs_client *clp)
 {
+	set_bit(NFS4CLNT_RECLAIM_REBOOT, &clp->cl_state);
 	/* Mark all delegations for reclaim */
 	nfs_delegation_mark_reclaim(clp);
 	nfs4_state_mark_reclaim_helper(clp, nfs4_state_mark_reclaim_reboot);
-- 
2.35.1

[PATCH 4.9 03/30] nfs4: Fix kmemleak when allocate slot failed

[Greg Kroah-Hartman]

From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>

[ Upstream commit 7e8436728e22181c3f12a5dbabd35ed3a8b8c593 ]

If one of the slot allocate failed, should cleanup all the other
allocated slots, otherwise, the allocated slots will leak:

  unreferenced object 0xffff8881115aa100 (size 64):
    comm ""mount.nfs"", pid 679, jiffies 4294744957 (age 115.037s)
    hex dump (first 32 bytes):
      00 cc 19 73 81 88 ff ff 00 a0 5a 11 81 88 ff ff  ...s......Z.....
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<000000007a4c434a>] nfs4_find_or_create_slot+0x8e/0x130
      [<000000005472a39c>] nfs4_realloc_slot_table+0x23f/0x270
      [<00000000cd8ca0eb>] nfs40_init_client+0x4a/0x90
      [<00000000128486db>] nfs4_init_client+0xce/0x270
      [<000000008d2cacad>] nfs4_set_client+0x1a2/0x2b0
      [<000000000e593b52>] nfs4_create_server+0x300/0x5f0
      [<00000000e4425dd2>] nfs4_try_get_tree+0x65/0x110
      [<00000000d3a6176f>] vfs_get_tree+0x41/0xf0
      [<0000000016b5ad4c>] path_mount+0x9b3/0xdd0
      [<00000000494cae71>] __x64_sys_mount+0x190/0x1d0
      [<000000005d56bdec>] do_syscall_64+0x35/0x80
      [<00000000687c9ae4>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: abf79bb341bf ("NFS: Add a slot table to struct nfs_client for NFSv4.0 transport blocking")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4client.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index 48baa92846e5..7c28a90c0340 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -326,6 +326,7 @@ int nfs40_init_client(struct nfs_client *clp)
 	ret = nfs4_setup_slot_table(tbl, NFS4_MAX_SLOT_TABLE,
 					"NFSv4.0 transport Slot table");
 	if (ret) {
+		nfs4_shutdown_slot_table(tbl);
 		kfree(tbl);
 		return ret;
 	}
-- 
2.35.1

[PATCH 4.9 04/30] nfc: s3fwrn5: Fix potential memory leak in s3fwrn5_nci_send()

[Greg Kroah-Hartman]

From: Shang XiaoJing <shangxiaojing@huawei.com>

[ Upstream commit 3a146b7e3099dc7cf3114f627d9b79291e2d2203 ]

s3fwrn5_nci_send() will call s3fwrn5_i2c_write() or s3fwrn82_uart_write(),
and free the skb if write() failed. However, even if the write() run
succeeds, the skb will not be freed in write(). As the result, the skb
will memleak. s3fwrn5_nci_send() should also free the skb when write()
succeeds.

Fixes: c04c674fadeb ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/s3fwrn5/core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/nfc/s3fwrn5/core.c b/drivers/nfc/s3fwrn5/core.c
index 64b58455e620..f23a1e4d7e1e 100644
--- a/drivers/nfc/s3fwrn5/core.c
+++ b/drivers/nfc/s3fwrn5/core.c
@@ -108,11 +108,15 @@ static int s3fwrn5_nci_send(struct nci_dev *ndev, struct sk_buff *skb)
 	}
 
 	ret = s3fwrn5_write(info, skb);
-	if (ret < 0)
+	if (ret < 0) {
 		kfree_skb(skb);
+		mutex_unlock(&info->mutex);
+		return ret;
+	}
 
+	consume_skb(skb);
 	mutex_unlock(&info->mutex);
-	return ret;
+	return 0;
 }
 
 static int s3fwrn5_nci_post_setup(struct nci_dev *ndev)
-- 
2.35.1

[PATCH 4.9 05/30] nfc: nfcmrvl: Fix potential memory leak in nfcmrvl_i2c_nci_send()

[Greg Kroah-Hartman]

From: Shang XiaoJing <shangxiaojing@huawei.com>

[ Upstream commit 93d904a734a74c54d945a9884b4962977f1176cd ]

nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb
should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send()
will only free skb when i2c_master_send() return >=0, which means skb
will memleak when i2c_master_send() failed. Free skb no matter whether
i2c_master_send() succeeds.

Fixes: b5b3e23e4cac ("NFC: nfcmrvl: add i2c driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/nfcmrvl/i2c.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/nfc/nfcmrvl/i2c.c b/drivers/nfc/nfcmrvl/i2c.c
index bb546cabe809..91d7ef11aba3 100644
--- a/drivers/nfc/nfcmrvl/i2c.c
+++ b/drivers/nfc/nfcmrvl/i2c.c
@@ -151,10 +151,15 @@ static int nfcmrvl_i2c_nci_send(struct nfcmrvl_private *priv,
 			ret = -EREMOTEIO;
 		} else
 			ret = 0;
+	}
+
+	if (ret) {
 		kfree_skb(skb);
+		return ret;
 	}
 
-	return ret;
+	consume_skb(skb);
+	return 0;
 }
 
 static void nfcmrvl_i2c_nci_update_config(struct nfcmrvl_private *priv,
-- 
2.35.1

[PATCH 4.9 06/30] net: fec: fix improper use of NETDEV_TX_BUSY

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

[ Upstream commit 06a4df5863f73af193a4ff7abf7cb04058584f06 ]

The ndo_start_xmit() method must not free skb when returning
NETDEV_TX_BUSY, since caller is going to requeue freed skb.

Fix it by returning NETDEV_TX_OK in case of dma_map_single() fails.

Fixes: 79f339125ea3 ("net: fec: Add software TSO support")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index c06ac5f66a17..98a665538dbe 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -577,7 +577,7 @@ fec_enet_txq_put_data_tso(struct fec_enet_priv_tx_q *txq, struct sk_buff *skb,
 		dev_kfree_skb_any(skb);
 		if (net_ratelimit())
 			netdev_err(ndev, "Tx DMA memory map failed\n");
-		return NETDEV_TX_BUSY;
+		return NETDEV_TX_OK;
 	}
 
 	bdp->cbd_datlen = cpu_to_fec16(size);
@@ -639,7 +639,7 @@ fec_enet_txq_put_hdr_tso(struct fec_enet_priv_tx_q *txq,
 			dev_kfree_skb_any(skb);
 			if (net_ratelimit())
 				netdev_err(ndev, "Tx DMA memory map failed\n");
-			return NETDEV_TX_BUSY;
+			return NETDEV_TX_OK;
 		}
 	}
 
-- 
2.35.1

[PATCH 4.9 07/30] ata: pata_legacy: fix pdc20230_set_piomode()

[Greg Kroah-Hartman]

From: Sergey Shtylyov <s.shtylyov@omp.ru>

[ Upstream commit 171a93182eccd6e6835d2c86b40787f9f832efaa ]

Clang gives a warning when compiling pata_legacy.c with 'make W=1' about
the 'rt' local variable in pdc20230_set_piomode() being set but unused.
Quite obviously, there is an outb() call missing to write back the updated
variable. Moreover, checking the docs by Petr Soucek revealed that bitwise
AND should have been done with a negated timing mask and the master/slave
timing masks were swapped while updating...

Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.")
Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/pata_legacy.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 55fcdb798002..e4071768333d 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -292,9 +292,10 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	outb(inb(0x1F4) & 0x07, 0x1F4);
 
 	rt = inb(0x1F3);
-	rt &= 0x07 << (3 * adev->devno);
+	rt &= ~(0x07 << (3 * !adev->devno));
 	if (pio)
-		rt |= (1 + 3 * pio) << (3 * adev->devno);
+		rt |= (1 + 3 * pio) << (3 * !adev->devno);
+	outb(rt, 0x1F3);
 
 	udelay(100);
 	outb(inb(0x1F2) | 0x01, 0x1F2);
-- 
2.35.1

[PATCH 4.9 08/30] net: sched: Fix use after free in red_enqueue()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 8bdc2acd420c6f3dd1f1c78750ec989f02a1e2b9 ]

We can't use "skb" again after passing it to qdisc_enqueue().  This is
basically identical to commit 2f09707d0c97 ("sch_sfb: Also store skb
len before calling child enqueue").

Fixes: d7f4f332f082 ("sch_red: update backlog as well")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_red.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c
index d6abf5c5a5b8..27142950827a 100644
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -61,6 +61,7 @@ static int red_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 {
 	struct red_sched_data *q = qdisc_priv(sch);
 	struct Qdisc *child = q->qdisc;
+	unsigned int len;
 	int ret;
 
 	q->vars.qavg = red_calc_qavg(&q->parms,
@@ -96,9 +97,10 @@ static int red_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 		break;
 	}
 
+	len = qdisc_pkt_len(skb);
 	ret = qdisc_enqueue(skb, child, to_free);
 	if (likely(ret == NET_XMIT_SUCCESS)) {
-		qdisc_qstats_backlog_inc(sch, skb);
+		sch->qstats.backlog += len;
 		sch->q.qlen++;
 	} else if (net_xmit_drop_count(ret)) {
 		q->stats.pdrop++;
-- 
2.35.1

[PATCH 4.9 09/30] ipvs: use explicitly signed chars

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

[ Upstream commit 5c26159c97b324dc5174a5713eafb8c855cf8106 ]

The `char` type with no explicit sign is sometimes signed and sometimes
unsigned. This code will break on platforms such as arm, where char is
unsigned. So mark it here as explicitly signed, so that the
todrop_counter decrement and subsequent comparison is correct.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_conn.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index ecde2102d1ad..c84290d7cc39 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -1240,8 +1240,8 @@ static inline int todrop_entry(struct ip_vs_conn *cp)
 	 * The drop rate array needs tuning for real environments.
 	 * Called from timer bh only => no locking
 	 */
-	static const char todrop_rate[9] = {0, 1, 2, 3, 4, 5, 6, 7, 8};
-	static char todrop_counter[9] = {0};
+	static const signed char todrop_rate[9] = {0, 1, 2, 3, 4, 5, 6, 7, 8};
+	static signed char todrop_counter[9] = {0};
 	int i;
 
 	/* if the conn entry hasn't lasted for 60 seconds, don't drop it.
-- 
2.35.1

[PATCH 4.9 10/30] rose: Fix NULL pointer dereference in rose_send_frame()

[Greg Kroah-Hartman]

From: Zhang Qilong <zhangqilong3@huawei.com>

[ Upstream commit e97c089d7a49f67027395ddf70bf327eeac2611e ]

The syzkaller reported an issue:

KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387]
CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Workqueue: rcu_gp srcu_invoke_callbacks
RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101
Call Trace:
 <IRQ>
 rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255
 rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009
 rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111
 call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474
 expire_timers kernel/time/timer.c:1519 [inline]
 __run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790
 __run_timers kernel/time/timer.c:1768 [inline]
 run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803
 __do_softirq+0x1d0/0x9c8 kernel/softirq.c:571
 [...]
 </IRQ>

It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is
called in the rose_send_frame(). It's the first occurrence of the
`neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and
the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr.

It had been fixed by commit 3b3fd068c56e3fbea30090859216a368398e39bf
("rose: Fix Null pointer dereference in rose_send_frame()") ever.
But it's introduced by commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8
("rose: check NULL rose_loopback_neigh->loopback") again.

We fix it by add NULL check in rose_transmit_clear_request(). When
the 'dev' in 'neigh' is NULL, we don't reply the request and just
clear it.

syzkaller don't provide repro, and I provide a syz repro like:
r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2)
ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201})
r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0)
bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @default, @null]}, 0x40)
connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c)

Fixes: 3c53cd65dece ("rose: check NULL rose_loopback_neigh->loopback")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rose/rose_link.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/rose/rose_link.c b/net/rose/rose_link.c
index c76638cc2cd5..4e02634e4a66 100644
--- a/net/rose/rose_link.c
+++ b/net/rose/rose_link.c
@@ -241,6 +241,9 @@ void rose_transmit_clear_request(struct rose_neigh *neigh, unsigned int lci, uns
 	unsigned char *dptr;
 	int len;
 
+	if (!neigh->dev)
+		return;
+
 	len = AX25_BPQ_HEADER_LEN + AX25_MAX_HEADER_LEN + ROSE_MIN_LEN + 3;
 
 	if ((skb = alloc_skb(len, GFP_ATOMIC)) == NULL)
-- 
2.35.1

[PATCH 4.9 11/30] mISDN: fix possible memory leak in mISDN_register_device()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit e7d1d4d9ac0dfa40be4c2c8abd0731659869b297 ]

Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
add put_device() to give up the reference, so that the name can be
freed in kobject_cleanup() when the refcount is 0.

Set device class before put_device() to avoid null release() function
WARN message in device_release().

Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/isdn/mISDN/core.c b/drivers/isdn/mISDN/core.c
index f5a06a6fb297..5cd53b2c47c7 100644
--- a/drivers/isdn/mISDN/core.c
+++ b/drivers/isdn/mISDN/core.c
@@ -242,11 +242,12 @@ mISDN_register_device(struct mISDNdevice *dev,
 	if (debug & DEBUG_CORE)
 		printk(KERN_DEBUG "mISDN_register %s %d\n",
 		       dev_name(&dev->dev), dev->id);
+	dev->dev.class = &mISDN_class;
+
 	err = create_stack(dev);
 	if (err)
 		goto error1;
 
-	dev->dev.class = &mISDN_class;
 	dev->dev.platform_data = dev;
 	dev->dev.parent = parent;
 	dev_set_drvdata(&dev->dev, dev);
@@ -258,8 +259,8 @@ mISDN_register_device(struct mISDNdevice *dev,
 
 error3:
 	delete_stack(dev);
-	return err;
 error1:
+	put_device(&dev->dev);
 	return err;
 
 }
-- 
2.35.1

[PATCH 4.9 12/30] isdn: mISDN: netjet: fix wrong check of device registration

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit bf00f5426074249058a106a6edbb89e4b25a4d79 ]

The class is set in mISDN_register_device(), but if device_add() returns
error, it will lead to delete a device without added, fix this by using
device_is_registered() to check if the device is registered.

Fixes: a900845e5661 ("mISDN: Add support for Traverse Technologies NETJet PCI cards")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/mISDN/netjet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c
index feada9d7cbcc..a549a18e4619 100644
--- a/drivers/isdn/hardware/mISDN/netjet.c
+++ b/drivers/isdn/hardware/mISDN/netjet.c
@@ -970,7 +970,7 @@ nj_release(struct tiger_hw *card)
 	}
 	if (card->irq > 0)
 		free_irq(card->irq, card);
-	if (card->isac.dch.dev.dev.class)
+	if (device_is_registered(&card->isac.dch.dev.dev))
 		mISDN_unregister_device(&card->isac.dch.dev);
 
 	for (i = 0; i < 2; i++) {
-- 
2.35.1

[PATCH 4.9 13/30] btrfs: fix ulist leaks in error paths of qgroup self tests

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit d37de92b38932d40e4a251e876cc388f9aee5f42 ]

In the test_no_shared_qgroup() and test_multiple_refs() qgroup self tests,
if we fail to add the tree ref, remove the extent item or remove the
extent ref, we are returning from the test function without freeing the
"old_roots" ulist that was allocated by the previous calls to
btrfs_find_all_roots(). Fix that by calling ulist_free() before returning.

Fixes: 442244c96332 ("btrfs: qgroup: Switch self test to extent-oriented qgroup mechanism.")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/tests/qgroup-tests.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/tests/qgroup-tests.c b/fs/btrfs/tests/qgroup-tests.c
index e0aa6b9786fa..ef9ff6dda173 100644
--- a/fs/btrfs/tests/qgroup-tests.c
+++ b/fs/btrfs/tests/qgroup-tests.c
@@ -249,8 +249,10 @@ static int test_no_shared_qgroup(struct btrfs_root *root,
 
 	ret = insert_normal_tree_ref(root, nodesize, nodesize, 0,
 				BTRFS_FS_TREE_OBJECTID);
-	if (ret)
+	if (ret) {
+		ulist_free(old_roots);
 		return ret;
+	}
 
 	ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &new_roots);
 	if (ret) {
@@ -283,8 +285,10 @@ static int test_no_shared_qgroup(struct btrfs_root *root,
 	}
 
 	ret = remove_extent_item(root, nodesize, nodesize);
-	if (ret)
+	if (ret) {
+		ulist_free(old_roots);
 		return -EINVAL;
+	}
 
 	ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &new_roots);
 	if (ret) {
@@ -346,8 +350,10 @@ static int test_multiple_refs(struct btrfs_root *root,
 
 	ret = insert_normal_tree_ref(root, nodesize, nodesize, 0,
 				BTRFS_FS_TREE_OBJECTID);
-	if (ret)
+	if (ret) {
+		ulist_free(old_roots);
 		return ret;
+	}
 
 	ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &new_roots);
 	if (ret) {
@@ -379,8 +385,10 @@ static int test_multiple_refs(struct btrfs_root *root,
 
 	ret = add_tree_ref(root, nodesize, nodesize, 0,
 			BTRFS_FIRST_FREE_OBJECTID);
-	if (ret)
+	if (ret) {
+		ulist_free(old_roots);
 		return ret;
+	}
 
 	ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &new_roots);
 	if (ret) {
@@ -418,8 +426,10 @@ static int test_multiple_refs(struct btrfs_root *root,
 
 	ret = remove_extent_ref(root, nodesize, nodesize, 0,
 				BTRFS_FIRST_FREE_OBJECTID);
-	if (ret)
+	if (ret) {
+		ulist_free(old_roots);
 		return ret;
+	}
 
 	ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &new_roots);
 	if (ret) {
-- 
2.35.1

[PATCH 4.9 14/30] Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maxtram95@gmail.com>

[ Upstream commit 3aff8aaca4e36dc8b17eaa011684881a80238966 ]

Fix the race condition between the following two flows that run in
parallel:

1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) ->
   __sock_queue_rcv_skb.

2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram.

An SKB can be queued by the first flow and immediately dequeued and
freed by the second flow, therefore the callers of l2cap_reassemble_sdu
can't use the SKB after that function returns. However, some places
continue accessing struct l2cap_ctrl that resides in the SKB's CB for a
short time after l2cap_reassemble_sdu returns, leading to a
use-after-free condition (the stack trace is below, line numbers for
kernel 5.19.8).

Fix it by keeping a local copy of struct l2cap_ctrl.

BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169

Workqueue: hci0 hci_rx_work [bluetooth]
Call Trace:
 <TASK>
 dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
 print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429)
 ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
 kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493)
 ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
 l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
 l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth
 ret_from_fork (arch/x86/entry/entry_64.S:306)
 </TASK>

Allocated by task 43169:
 kasan_save_stack (mm/kasan/common.c:39)
 __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
 kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293)
 __alloc_skb (net/core/skbuff.c:414)
 l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth
 l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth
 hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth
 process_one_work (kernel/workqueue.c:2289)
 worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437)
 kthread (kernel/kthread.c:376)
 ret_from_fork (arch/x86/entry/entry_64.S:306)

Freed by task 27920:
 kasan_save_stack (mm/kasan/common.c:39)
 kasan_set_track (mm/kasan/common.c:45)
 kasan_set_free_info (mm/kasan/generic.c:372)
 ____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328)
 slab_free_freelist_hook (mm/slub.c:1780)
 kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553)
 skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323)
 bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth
 l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth
 sock_read_iter (net/socket.c:1087)
 new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401)
 vfs_read (fs/read_write.c:482)
 ksys_read (fs/read_write.c:620)
 do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

Link: https://lore.kernel.org/linux-bluetooth/CAKErNvoqga1WcmoR3-0875esY6TVWFQDandbVZncSiuGPBQXLA@mail.gmail.com/T/#u
Fixes: d2a7ac5d5d3a ("Bluetooth: Add the ERTM receive state machine")
Fixes: 4b51dae96731 ("Bluetooth: Add streaming mode receive and incoming packet classifier")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 48 ++++++++++++++++++++++++++++++++------
 1 file changed, 41 insertions(+), 7 deletions(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index ec04a7ea5537..a8720e9c3b85 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -6247,6 +6247,7 @@ static int l2cap_rx_state_recv(struct l2cap_chan *chan,
 			       struct l2cap_ctrl *control,
 			       struct sk_buff *skb, u8 event)
 {
+	struct l2cap_ctrl local_control;
 	int err = 0;
 	bool skb_in_use = false;
 
@@ -6271,15 +6272,32 @@ static int l2cap_rx_state_recv(struct l2cap_chan *chan,
 			chan->buffer_seq = chan->expected_tx_seq;
 			skb_in_use = true;
 
+			/* l2cap_reassemble_sdu may free skb, hence invalidate
+			 * control, so make a copy in advance to use it after
+			 * l2cap_reassemble_sdu returns and to avoid the race
+			 * condition, for example:
+			 *
+			 * The current thread calls:
+			 *   l2cap_reassemble_sdu
+			 *     chan->ops->recv == l2cap_sock_recv_cb
+			 *       __sock_queue_rcv_skb
+			 * Another thread calls:
+			 *   bt_sock_recvmsg
+			 *     skb_recv_datagram
+			 *     skb_free_datagram
+			 * Then the current thread tries to access control, but
+			 * it was freed by skb_free_datagram.
+			 */
+			local_control = *control;
 			err = l2cap_reassemble_sdu(chan, skb, control);
 			if (err)
 				break;
 
-			if (control->final) {
+			if (local_control.final) {
 				if (!test_and_clear_bit(CONN_REJ_ACT,
 							&chan->conn_state)) {
-					control->final = 0;
-					l2cap_retransmit_all(chan, control);
+					local_control.final = 0;
+					l2cap_retransmit_all(chan, &local_control);
 					l2cap_ertm_send(chan);
 				}
 			}
@@ -6659,11 +6677,27 @@ static int l2cap_rx(struct l2cap_chan *chan, struct l2cap_ctrl *control,
 static int l2cap_stream_rx(struct l2cap_chan *chan, struct l2cap_ctrl *control,
 			   struct sk_buff *skb)
 {
+	/* l2cap_reassemble_sdu may free skb, hence invalidate control, so store
+	 * the txseq field in advance to use it after l2cap_reassemble_sdu
+	 * returns and to avoid the race condition, for example:
+	 *
+	 * The current thread calls:
+	 *   l2cap_reassemble_sdu
+	 *     chan->ops->recv == l2cap_sock_recv_cb
+	 *       __sock_queue_rcv_skb
+	 * Another thread calls:
+	 *   bt_sock_recvmsg
+	 *     skb_recv_datagram
+	 *     skb_free_datagram
+	 * Then the current thread tries to access control, but it was freed by
+	 * skb_free_datagram.
+	 */
+	u16 txseq = control->txseq;
+
 	BT_DBG("chan %p, control %p, skb %p, state %d", chan, control, skb,
 	       chan->rx_state);
 
-	if (l2cap_classify_txseq(chan, control->txseq) ==
-	    L2CAP_TXSEQ_EXPECTED) {
+	if (l2cap_classify_txseq(chan, txseq) == L2CAP_TXSEQ_EXPECTED) {
 		l2cap_pass_to_tx(chan, control);
 
 		BT_DBG("buffer_seq %d->%d", chan->buffer_seq,
@@ -6686,8 +6720,8 @@ static int l2cap_stream_rx(struct l2cap_chan *chan, struct l2cap_ctrl *control,
 		}
 	}
 
-	chan->last_acked_seq = control->txseq;
-	chan->expected_tx_seq = __next_seq(chan, control->txseq);
+	chan->last_acked_seq = txseq;
+	chan->expected_tx_seq = __next_seq(chan, txseq);
 
 	return 0;
 }
-- 
2.35.1

[PATCH 4.9 15/30] Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()

[Greg Kroah-Hartman]

From: Zhengchao Shao <shaozhengchao@huawei.com>

[ Upstream commit 0d0e2d032811280b927650ff3c15fe5020e82533 ]

When l2cap_recv_frame() is invoked to receive data, and the cid is
L2CAP_CID_A2MP, if the channel does not exist, it will create a channel.
However, after a channel is created, the hold operation of the channel
is not performed. In this case, the value of channel reference counting
is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del()
invokes the close hook function of A2MP to release the channel. Then
 l2cap_chan_unlock(chan) will trigger UAF issue.

The process is as follows:
Receive data:
l2cap_data_channel()
    a2mp_channel_create()  --->channel ref is 2
    l2cap_chan_put()       --->channel ref is 1

Triger event:
    hci_error_reset()
        hci_dev_do_close()
        ...
        l2cap_disconn_cfm()
            l2cap_conn_del()
                l2cap_chan_hold()    --->channel ref is 2
                l2cap_chan_del()     --->channel ref is 1
                a2mp_chan_close_cb() --->channel ref is 0, release channel
                l2cap_chan_unlock()  --->UAF of channel

The detailed Call Trace is as follows:
BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0
Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593
Workqueue: hci0 hci_error_reset
Call Trace:
 <TASK>
 dump_stack_lvl+0xcd/0x134
 print_report.cold+0x2ba/0x719
 kasan_report+0xb1/0x1e0
 kasan_check_range+0x140/0x190
 __mutex_unlock_slowpath+0xa6/0x5e0
 l2cap_conn_del+0x404/0x7b0
 l2cap_disconn_cfm+0x8c/0xc0
 hci_conn_hash_flush+0x11f/0x260
 hci_dev_close_sync+0x5f5/0x11f0
 hci_dev_do_close+0x2d/0x70
 hci_error_reset+0x9e/0x140
 process_one_work+0x98a/0x1620
 worker_thread+0x665/0x1080
 kthread+0x2e4/0x3a0
 ret_from_fork+0x1f/0x30
 </TASK>

Allocated by task 7593:
 kasan_save_stack+0x1e/0x40
 __kasan_kmalloc+0xa9/0xd0
 l2cap_chan_create+0x40/0x930
 amp_mgr_create+0x96/0x990
 a2mp_channel_create+0x7d/0x150
 l2cap_recv_frame+0x51b8/0x9a70
 l2cap_recv_acldata+0xaa3/0xc00
 hci_rx_work+0x702/0x1220
 process_one_work+0x98a/0x1620
 worker_thread+0x665/0x1080
 kthread+0x2e4/0x3a0
 ret_from_fork+0x1f/0x30

Freed by task 7593:
 kasan_save_stack+0x1e/0x40
 kasan_set_track+0x21/0x30
 kasan_set_free_info+0x20/0x30
 ____kasan_slab_free+0x167/0x1c0
 slab_free_freelist_hook+0x89/0x1c0
 kfree+0xe2/0x580
 l2cap_chan_put+0x22a/0x2d0
 l2cap_conn_del+0x3fc/0x7b0
 l2cap_disconn_cfm+0x8c/0xc0
 hci_conn_hash_flush+0x11f/0x260
 hci_dev_close_sync+0x5f5/0x11f0
 hci_dev_do_close+0x2d/0x70
 hci_error_reset+0x9e/0x140
 process_one_work+0x98a/0x1620
 worker_thread+0x665/0x1080
 kthread+0x2e4/0x3a0
 ret_from_fork+0x1f/0x30

Last potentially related work creation:
 kasan_save_stack+0x1e/0x40
 __kasan_record_aux_stack+0xbe/0xd0
 call_rcu+0x99/0x740
 netlink_release+0xe6a/0x1cf0
 __sock_release+0xcd/0x280
 sock_close+0x18/0x20
 __fput+0x27c/0xa90
 task_work_run+0xdd/0x1a0
 exit_to_user_mode_prepare+0x23c/0x250
 syscall_exit_to_user_mode+0x19/0x50
 do_syscall_64+0x42/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Second to last potentially related work creation:
 kasan_save_stack+0x1e/0x40
 __kasan_record_aux_stack+0xbe/0xd0
 call_rcu+0x99/0x740
 netlink_release+0xe6a/0x1cf0
 __sock_release+0xcd/0x280
 sock_close+0x18/0x20
 __fput+0x27c/0xa90
 task_work_run+0xdd/0x1a0
 exit_to_user_mode_prepare+0x23c/0x250
 syscall_exit_to_user_mode+0x19/0x50
 do_syscall_64+0x42/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index a8720e9c3b85..f6d8bed48766 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -6959,6 +6959,7 @@ static void l2cap_data_channel(struct l2cap_conn *conn, u16 cid,
 				return;
 			}
 
+			l2cap_chan_hold(chan);
 			l2cap_chan_lock(chan);
 		} else {
 			BT_DBG("unknown cid 0x%4.4x", cid);
-- 
2.35.1

[PATCH 4.9 16/30] net: mdio: fix undefined behavior in bit shift for __mdiobus_register

[Greg Kroah-Hartman]

From: Gaosheng Cui <cuigaosheng1@huawei.com>

[ Upstream commit 40e4eb324c59e11fcb927aa46742d28aba6ecb8a ]

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
 <TASK>
 dump_stack_lvl+0x7d/0xa5
 dump_stack+0x15/0x1b
 ubsan_epilogue+0xe/0x4e
 __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
 __mdiobus_register+0x49d/0x4e0
 fixed_mdio_bus_init+0xd8/0x12d
 do_one_initcall+0x76/0x430
 kernel_init_freeable+0x3b3/0x422
 kernel_init+0x24/0x1e0
 ret_from_fork+0x1f/0x30
 </TASK>

Fixes: 4fd5f812c23c ("phylib: allow incremental scanning of an mii bus")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mdio_bus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 0fa6e2da4b5a..2aecc5ee9133 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -335,7 +335,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 		bus->reset(bus);
 
 	for (i = 0; i < PHY_MAX_ADDR; i++) {
-		if ((bus->phy_mask & (1 << i)) == 0) {
+		if ((bus->phy_mask & BIT(i)) == 0) {
 			struct phy_device *phydev;
 
 			phydev = mdiobus_scan(bus, i);
-- 
2.35.1

[PATCH 4.9 17/30] media: s5p_cec: limit msg.len to CEC_MAX_MSG_SIZE

[Greg Kroah-Hartman]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 93f65ce036863893c164ca410938e0968964b26c ]

I expect that the hardware will have limited this to 16, but just in
case it hasn't, check for this corner case.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/s5p-cec/s5p_cec.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/media/s5p-cec/s5p_cec.c b/drivers/staging/media/s5p-cec/s5p_cec.c
index bebd44d9bd51..f6d1d98431a7 100644
--- a/drivers/staging/media/s5p-cec/s5p_cec.c
+++ b/drivers/staging/media/s5p-cec/s5p_cec.c
@@ -112,6 +112,8 @@ static irqreturn_t s5p_cec_irq_handler(int irq, void *priv)
 				dev_dbg(cec->dev, "Buffer overrun (worker did not process previous message)\n");
 			cec->rx = STATE_BUSY;
 			cec->msg.len = status >> 24;
+			if (cec->msg.len > CEC_MAX_MSG_SIZE)
+				cec->msg.len = CEC_MAX_MSG_SIZE;
 			cec->msg.rx_status = CEC_RX_STATUS_OK;
 			s5p_cec_get_rx_buf(cec, cec->msg.len,
 					cec->msg.msg);
-- 
2.35.1

[PATCH 4.9 18/30] media: dvb-frontends/drxk: initialize err to 0

[Greg Kroah-Hartman]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 20694e96ca089ce6693c2348f8f628ee621e4e74 ]

Fix a compiler warning:

drivers/media/dvb-frontends/drxk_hard.c: In function 'drxk_read_ucblocks':
drivers/media/dvb-frontends/drxk_hard.c:6673:21: warning: 'err' may be used uninitialized [-Wmaybe-uninitialized]
 6673 |         *ucblocks = (u32) err;
      |                     ^~~~~~~~~
drivers/media/dvb-frontends/drxk_hard.c:6663:13: note: 'err' was declared here
 6663 |         u16 err;
      |             ^~~

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/drxk_hard.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c
index c595adc61c6f..f6cf1b0b992c 100644
--- a/drivers/media/dvb-frontends/drxk_hard.c
+++ b/drivers/media/dvb-frontends/drxk_hard.c
@@ -6697,7 +6697,7 @@ static int drxk_read_snr(struct dvb_frontend *fe, u16 *snr)
 static int drxk_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
 {
 	struct drxk_state *state = fe->demodulator_priv;
-	u16 err;
+	u16 err = 0;
 
 	dprintk(1, "\n");
 
-- 
2.35.1

[PATCH 4.9 19/30] i2c: xiic: Add platform module alias

[Greg Kroah-Hartman]

From: Martin Tůma <martin.tuma@digiteqautomotive.com>

[ Upstream commit b8caf0a0e04583fb71e21495bef84509182227ea ]

The missing "platform" alias is required for the mgb4 v4l2 driver to load
the i2c controller driver when probing the HW.

Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-xiic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index c65a5d0af555..4b750c99819a 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -897,6 +897,7 @@ static struct platform_driver xiic_i2c_driver = {
 
 module_platform_driver(xiic_i2c_driver);
 
+MODULE_ALIAS("platform:" DRIVER_NAME);
 MODULE_AUTHOR("info@mocean-labs.com");
 MODULE_DESCRIPTION("Xilinx I2C bus driver");
 MODULE_LICENSE("GPL v2");
-- 
2.35.1

[PATCH 4.9 20/30] Bluetooth: L2CAP: Fix attempting to access uninitialized memory

[Greg Kroah-Hartman]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

commit b1a2cd50c0357f243b7435a732b4e62ba3157a2e upstream.

On l2cap_parse_conf_req the variable efs is only initialized if
remote_efs has been set.

CVE: CVE-2022-42895
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/l2cap_core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3541,7 +3541,8 @@ done:
 			l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
 					   sizeof(rfc), (unsigned long) &rfc, endptr - ptr);
 
-			if (test_bit(FLAG_EFS_ENABLE, &chan->flags)) {
+			if (remote_efs &&
+			    test_bit(FLAG_EFS_ENABLE, &chan->flags)) {
 				chan->remote_id = efs.id;
 				chan->remote_stype = efs.stype;
 				chan->remote_msdu = le16_to_cpu(efs.msdu);

[PATCH 4.9 21/30] btrfs: fix type of parameter generation in btrfs_get_dentry

[Greg Kroah-Hartman]

From: David Sterba <dsterba@suse.com>

commit 2398091f9c2c8e0040f4f9928666787a3e8108a7 upstream.

The type of parameter generation has been u32 since the beginning,
however all callers pass a u64 generation, so unify the types to prevent
potential loss.

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/export.c |    2 +-
 fs/btrfs/export.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/fs/btrfs/export.c
+++ b/fs/btrfs/export.c
@@ -56,7 +56,7 @@ static int btrfs_encode_fh(struct inode
 }
 
 struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
-				u64 root_objectid, u32 generation,
+				u64 root_objectid, u64 generation,
 				int check_generation)
 {
 	struct btrfs_fs_info *fs_info = btrfs_sb(sb);
--- a/fs/btrfs/export.h
+++ b/fs/btrfs/export.h
@@ -17,7 +17,7 @@ struct btrfs_fid {
 } __attribute__ ((packed));
 
 struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
-				u64 root_objectid, u32 generation,
+				u64 root_objectid, u64 generation,
 				int check_generation);
 struct dentry *btrfs_get_parent(struct dentry *child);
 

[PATCH 4.9 22/30] ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices

[Greg Kroah-Hartman]

From: John Veness <john-linux@pelago.org.uk>

commit 6e2c9105e0b743c92a157389d40f00b81bdd09fe upstream.

Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that
the audio stream doesn't sound mono. Also fix initial stream
alignment, so that left and right channels are in the correct order.

Signed-off-by: John Veness <john-linux@pelago.org.uk>
Link: https://lore.kernel.org/r/20220624140757.28758-1-john-linux@pelago.org.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/quirks-table.h |   58 +++++++++++++++++++++++++++++++++++++++++++++++
 sound/usb/quirks.c       |    1 
 2 files changed, 59 insertions(+)

--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3334,6 +3334,64 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge
 },
 
 /*
+ * MacroSilicon MS2100/MS2106 based AV capture cards
+ *
+ * These claim 96kHz 1ch in the descriptors, but are actually 48kHz 2ch.
+ * They also need QUIRK_AUDIO_ALIGN_TRANSFER, which makes one wonder if
+ * they pretend to be 96kHz mono as a workaround for stereo being broken
+ * by that...
+ *
+ * They also have an issue with initial stream alignment that causes the
+ * channels to be swapped and out of phase, which is dealt with in quirks.c.
+ */
+{
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+		       USB_DEVICE_ID_MATCH_INT_CLASS |
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+	.idVendor = 0x534d,
+	.idProduct = 0x0021,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.vendor_name = "MacroSilicon",
+		.product_name = "MS210x",
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = &(const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 2,
+				.type = QUIRK_AUDIO_ALIGN_TRANSFER,
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_AUDIO_STANDARD_MIXER,
+			},
+			{
+				.ifnum = 3,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S16_LE,
+					.channels = 2,
+					.iface = 3,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.attributes = 0,
+					.endpoint = 0x82,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_CONTINUOUS,
+					.rate_min = 48000,
+					.rate_max = 48000,
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
+
+/*
  * MacroSilicon MS2109 based HDMI capture cards
  *
  * These claim 96kHz 1ch in the descriptors, but are actually 48kHz 2ch.
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1129,6 +1129,7 @@ void snd_usb_set_format_quirk(struct snd
 	case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */
 		set_format_emu_quirk(subs, fmt);
 		break;
+	case USB_ID(0x534d, 0x0021): /* MacroSilicon MS2100/MS2106 */
 	case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */
 		subs->stream_offset_adj = 2;
 		break;

[PATCH 4.9 23/30] parisc: Make 8250_gsc driver dependend on CONFIG_PARISC

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit e8a18e3f00f3ee8d07c17ab1ea3ad4df4a3b6fe0 upstream.

Although the name of the driver 8250_gsc.c suggests that it handles
only serial ports on the GSC bus, it does handle serial ports listed
in the parisc machine inventory as well, e.g. the serial ports in a
C8000 PCI-only workstation.

Change the dependency to CONFIG_PARISC, so that the driver gets included
in the kernel even if CONFIG_GSC isn't set.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -105,7 +105,7 @@ config SERIAL_8250_CONSOLE
 
 config SERIAL_8250_GSC
 	tristate
-	depends on SERIAL_8250 && GSC
+	depends on SERIAL_8250 && PARISC
 	default SERIAL_8250
 
 config SERIAL_8250_DMA

[PATCH 4.9 24/30] parisc: Export iosapic_serial_irq() symbol for serial port driver

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit a0c9f1f2e53b8eb2ae43987a30e547ba56b4fa18 upstream.

The parisc serial port driver needs this symbol when it's compiled
as module.

Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/parisc/iosapic.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -889,6 +889,7 @@ int iosapic_serial_irq(struct parisc_dev
 
 	return vi->txn_irq;
 }
+EXPORT_SYMBOL(iosapic_serial_irq);
 #endif
 
 

[PATCH 4.9 25/30] ext4: fix warning in ext4_da_release_space

[Greg Kroah-Hartman]

From: Ye Bin <yebin10@huawei.com>

commit 1b8f787ef547230a3249bcf897221ef0cc78481b upstream.

Syzkaller report issue as follows:
EXT4-fs (loop0): Free/Dirty block details
EXT4-fs (loop0): free_blocks=0
EXT4-fs (loop0): dirty_blocks=0
EXT4-fs (loop0): Block reservation details
EXT4-fs (loop0): i_reserved_data_blocks=0
EXT4-fs warning (device loop0): ext4_da_release_space:1527: ext4_da_release_space: ino 18, to_free 1 with only 0 reserved data blocks
------------[ cut here ]------------
WARNING: CPU: 0 PID: 92 at fs/ext4/inode.c:1528 ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1524
Modules linked in:
CPU: 0 PID: 92 Comm: kworker/u4:4 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Workqueue: writeback wb_workfn (flush-7:0)
RIP: 0010:ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1528
RSP: 0018:ffffc900015f6c90 EFLAGS: 00010296
RAX: 42215896cd52ea00 RBX: 0000000000000000 RCX: 42215896cd52ea00
RDX: 0000000000000000 RSI: 0000000080000001 RDI: 0000000000000000
RBP: 1ffff1100e907d96 R08: ffffffff816aa79d R09: fffff520002bece5
R10: fffff520002bece5 R11: 1ffff920002bece4 R12: ffff888021fd2000
R13: ffff88807483ecb0 R14: 0000000000000001 R15: ffff88807483e740
FS:  0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005555569ba628 CR3: 000000000c88e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 ext4_es_remove_extent+0x1ab/0x260 fs/ext4/extents_status.c:1461
 mpage_release_unused_pages+0x24d/0xef0 fs/ext4/inode.c:1589
 ext4_writepages+0x12eb/0x3be0 fs/ext4/inode.c:2852
 do_writepages+0x3c3/0x680 mm/page-writeback.c:2469
 __writeback_single_inode+0xd1/0x670 fs/fs-writeback.c:1587
 writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1870
 wb_writeback+0x41f/0x7b0 fs/fs-writeback.c:2044
 wb_do_writeback fs/fs-writeback.c:2187 [inline]
 wb_workfn+0x3cb/0xef0 fs/fs-writeback.c:2227
 process_one_work+0x877/0xdb0 kernel/workqueue.c:2289
 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
 kthread+0x266/0x300 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
 </TASK>

Above issue may happens as follows:
ext4_da_write_begin
  ext4_create_inline_data
    ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS);
    ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA);
__ext4_ioctl
  ext4_ext_migrate -> will lead to eh->eh_entries not zero, and set extent flag
ext4_da_write_begin
  ext4_da_convert_inline_data_to_extent
    ext4_da_write_inline_data_begin
      ext4_da_map_blocks
        ext4_insert_delayed_block
	  if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk))
	    if (!ext4_es_scan_clu(inode, &ext4_es_is_mapped, lblk))
	      ext4_clu_mapped(inode, EXT4_B2C(sbi, lblk)); -> will return 1
	       allocated = true;
          ext4_es_insert_delayed_block(inode, lblk, allocated);
ext4_writepages
  mpage_map_and_submit_extent(handle, &mpd, &give_up_on_write); -> return -ENOSPC
  mpage_release_unused_pages(&mpd, give_up_on_write); -> give_up_on_write == 1
    ext4_es_remove_extent
      ext4_da_release_space(inode, reserved);
        if (unlikely(to_free > ei->i_reserved_data_blocks))
	  -> to_free == 1  but ei->i_reserved_data_blocks == 0
	  -> then trigger warning as above

To solve above issue, forbid inode do migrate which has inline data.

Cc: stable@kernel.org
Reported-by: syzbot+c740bb18df70ad00952e@syzkaller.appspotmail.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221018022701.683489-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/migrate.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -450,7 +450,8 @@ int ext4_ext_migrate(struct inode *inode
 	 * already is extent-based, error out.
 	 */
 	if (!ext4_has_feature_extents(inode->i_sb) ||
-	    (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
+	    ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS) ||
+	    ext4_has_inline_data(inode))
 		return -EINVAL;
 
 	if (S_ISLNK(inode->i_mode) && inode->i_blocks == 0)

[PATCH 4.9 26/30] KVM: x86: Mask off reserved bits in CPUID.80000008H

[Greg Kroah-Hartman]

From: Jim Mattson <jmattson@google.com>

commit 7030d8530e533844e2f4b0e7476498afcd324634 upstream.

KVM_GET_SUPPORTED_CPUID should only enumerate features that KVM
actually supports. The following ranges of CPUID.80000008H are reserved
and should be masked off:
    ECX[31:18]
    ECX[11:8]

In addition, the PerfTscSize field at ECX[17:16] should also be zero
because KVM does not set the PERFTSC bit at CPUID.80000001H.ECX[27].

Fixes: 24c82e576b78 ("KVM: Sanitize cpuid")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220929225203.2234702-3-jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/cpuid.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -647,6 +647,7 @@ static inline int __do_cpuid_ent(struct
 			g_phys_as = phys_as;
 
 		entry->eax = g_phys_as | (virt_as << 8);
+		entry->ecx &= ~(GENMASK(31, 16) | GENMASK(11, 8));
 		entry->edx = 0;
 		/*
 		 * IBRS, IBPB and VIRT_SSBD aren't necessarily present in

[PATCH 4.9 27/30] KVM: x86: emulator: em_sysexit should update ctxt->mode

[Greg Kroah-Hartman]

From: Maxim Levitsky <mlevitsk@redhat.com>

commit 5015bb89b58225f97df6ac44383e7e8c8662c8c9 upstream.

SYSEXIT is one of the instructions that can change the
processor mode, thus ctxt->mode should be updated after it.

Note that this is likely a benign bug, because the only problematic
mode change is from 32 bit to 64 bit which can lead to truncation of RIP,
and it is not possible to do with sysexit,
since sysexit running in 32 bit mode will be limited to 32 bit version.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-11-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/emulate.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -2881,6 +2881,7 @@ static int em_sysexit(struct x86_emulate
 	ops->set_segment(ctxt, ss_sel, &ss, 0, VCPU_SREG_SS);
 
 	ctxt->_eip = rdx;
+	ctxt->mode = usermode;
 	*reg_write(ctxt, VCPU_REGS_RSP) = rcx;
 
 	return X86EMUL_CONTINUE;

[PATCH 4.9 28/30] KVM: x86: emulator: introduce emulator_recalc_and_set_mode

[Greg Kroah-Hartman]

From: Maxim Levitsky <mlevitsk@redhat.com>

commit d087e0f79fa0dd336a9a6b2f79ec23120f5eff73 upstream.

Some instructions update the cpu execution mode, which needs to update the
emulation mode.

Extract this code, and make assign_eip_far use it.

assign_eip_far now reads CS, instead of getting it via a parameter,
which is ok, because callers always assign CS to the same value
before calling this function.

No functional change is intended.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-12-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/emulate.c |   85 ++++++++++++++++++++++++++++++++-----------------
 1 file changed, 57 insertions(+), 28 deletions(-)

--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -750,8 +750,7 @@ static int linearize(struct x86_emulate_
 			   ctxt->mode, linear);
 }
 
-static inline int assign_eip(struct x86_emulate_ctxt *ctxt, ulong dst,
-			     enum x86emul_mode mode)
+static inline int assign_eip(struct x86_emulate_ctxt *ctxt, ulong dst)
 {
 	ulong linear;
 	int rc;
@@ -761,41 +760,71 @@ static inline int assign_eip(struct x86_
 
 	if (ctxt->op_bytes != sizeof(unsigned long))
 		addr.ea = dst & ((1UL << (ctxt->op_bytes << 3)) - 1);
-	rc = __linearize(ctxt, addr, &max_size, 1, false, true, mode, &linear);
+	rc = __linearize(ctxt, addr, &max_size, 1, false, true, ctxt->mode, &linear);
 	if (rc == X86EMUL_CONTINUE)
 		ctxt->_eip = addr.ea;
 	return rc;
 }
 
+static inline int emulator_recalc_and_set_mode(struct x86_emulate_ctxt *ctxt)
+{
+	u64 efer;
+	struct desc_struct cs;
+	u16 selector;
+	u32 base3;
+
+	ctxt->ops->get_msr(ctxt, MSR_EFER, &efer);
+
+	if (!(ctxt->ops->get_cr(ctxt, 0) & X86_CR0_PE)) {
+		/* Real mode. cpu must not have long mode active */
+		if (efer & EFER_LMA)
+			return X86EMUL_UNHANDLEABLE;
+		ctxt->mode = X86EMUL_MODE_REAL;
+		return X86EMUL_CONTINUE;
+	}
+
+	if (ctxt->eflags & X86_EFLAGS_VM) {
+		/* Protected/VM86 mode. cpu must not have long mode active */
+		if (efer & EFER_LMA)
+			return X86EMUL_UNHANDLEABLE;
+		ctxt->mode = X86EMUL_MODE_VM86;
+		return X86EMUL_CONTINUE;
+	}
+
+	if (!ctxt->ops->get_segment(ctxt, &selector, &cs, &base3, VCPU_SREG_CS))
+		return X86EMUL_UNHANDLEABLE;
+
+	if (efer & EFER_LMA) {
+		if (cs.l) {
+			/* Proper long mode */
+			ctxt->mode = X86EMUL_MODE_PROT64;
+		} else if (cs.d) {
+			/* 32 bit compatibility mode*/
+			ctxt->mode = X86EMUL_MODE_PROT32;
+		} else {
+			ctxt->mode = X86EMUL_MODE_PROT16;
+		}
+	} else {
+		/* Legacy 32 bit / 16 bit mode */
+		ctxt->mode = cs.d ? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
+	}
+
+	return X86EMUL_CONTINUE;
+}
+
 static inline int assign_eip_near(struct x86_emulate_ctxt *ctxt, ulong dst)
 {
-	return assign_eip(ctxt, dst, ctxt->mode);
+	return assign_eip(ctxt, dst);
 }
 
-static int assign_eip_far(struct x86_emulate_ctxt *ctxt, ulong dst,
-			  const struct desc_struct *cs_desc)
+static int assign_eip_far(struct x86_emulate_ctxt *ctxt, ulong dst)
 {
-	enum x86emul_mode mode = ctxt->mode;
-	int rc;
+	int rc = emulator_recalc_and_set_mode(ctxt);
 
-#ifdef CONFIG_X86_64
-	if (ctxt->mode >= X86EMUL_MODE_PROT16) {
-		if (cs_desc->l) {
-			u64 efer = 0;
+	if (rc != X86EMUL_CONTINUE)
+		return rc;
 
-			ctxt->ops->get_msr(ctxt, MSR_EFER, &efer);
-			if (efer & EFER_LMA)
-				mode = X86EMUL_MODE_PROT64;
-		} else
-			mode = X86EMUL_MODE_PROT32; /* temporary value */
-	}
-#endif
-	if (mode == X86EMUL_MODE_PROT16 || mode == X86EMUL_MODE_PROT32)
-		mode = cs_desc->d ? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
-	rc = assign_eip(ctxt, dst, mode);
-	if (rc == X86EMUL_CONTINUE)
-		ctxt->mode = mode;
-	return rc;
+	return assign_eip(ctxt, dst);
 }
 
 static inline int jmp_rel(struct x86_emulate_ctxt *ctxt, int rel)
@@ -2197,7 +2226,7 @@ static int em_jmp_far(struct x86_emulate
 	if (rc != X86EMUL_CONTINUE)
 		return rc;
 
-	rc = assign_eip_far(ctxt, ctxt->src.val, &new_desc);
+	rc = assign_eip_far(ctxt, ctxt->src.val);
 	/* Error handling is not implemented. */
 	if (rc != X86EMUL_CONTINUE)
 		return X86EMUL_UNHANDLEABLE;
@@ -2278,7 +2307,7 @@ static int em_ret_far(struct x86_emulate
 				       &new_desc);
 	if (rc != X86EMUL_CONTINUE)
 		return rc;
-	rc = assign_eip_far(ctxt, eip, &new_desc);
+	rc = assign_eip_far(ctxt, eip);
 	/* Error handling is not implemented. */
 	if (rc != X86EMUL_CONTINUE)
 		return X86EMUL_UNHANDLEABLE;
@@ -3467,7 +3496,7 @@ static int em_call_far(struct x86_emulat
 	if (rc != X86EMUL_CONTINUE)
 		return rc;
 
-	rc = assign_eip_far(ctxt, ctxt->src.val, &new_desc);
+	rc = assign_eip_far(ctxt, ctxt->src.val);
 	if (rc != X86EMUL_CONTINUE)
 		goto fail;
 

[PATCH 4.9 29/30] KVM: x86: emulator: update the emulation mode after CR0 write

[Greg Kroah-Hartman]

From: Maxim Levitsky <mlevitsk@redhat.com>

commit ad8f9e69942c7db90758d9d774157e53bce94840 upstream.

Update the emulation mode when handling writes to CR0, because
toggling CR0.PE switches between Real and Protected Mode, and toggling
CR0.PG when EFER.LME=1 switches between Long and Protected Mode.

This is likely a benign bug because there is no writeback of state,
other than the RIP increment, and when toggling CR0.PE, the CPU has
to execute code from a very low memory address.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-14-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/emulate.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -3643,11 +3643,25 @@ static int em_movbe(struct x86_emulate_c
 
 static int em_cr_write(struct x86_emulate_ctxt *ctxt)
 {
-	if (ctxt->ops->set_cr(ctxt, ctxt->modrm_reg, ctxt->src.val))
+	int cr_num = ctxt->modrm_reg;
+	int r;
+
+	if (ctxt->ops->set_cr(ctxt, cr_num, ctxt->src.val))
 		return emulate_gp(ctxt, 0);
 
 	/* Disable writeback. */
 	ctxt->dst.type = OP_NONE;
+
+	if (cr_num == 0) {
+		/*
+		 * CR0 write might have updated CR0.PE and/or CR0.PG
+		 * which can affect the cpu's execution mode.
+		 */
+		r = emulator_recalc_and_set_mode(ctxt);
+		if (r != X86EMUL_CONTINUE)
+			return r;
+	}
+
 	return X86EMUL_CONTINUE;
 }
 

[PATCH 4.9 30/30] wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker()

[Greg Kroah-Hartman]

From: Dokyung Song <dokyung.song@gmail.com>

commit 6788ba8aed4e28e90f72d68a9d794e34eac17295 upstream.

This patch fixes an intra-object buffer overflow in brcmfmac that occurs
when the device provides a 'bsscfgidx' equal to or greater than the
buffer size. The patch adds a check that leads to a safe failure if that
is the case.

This fixes CVE-2022-3628.

UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
index 52 is out of range for type 'brcmf_if *[16]'
CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G           O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: events brcmf_fweh_event_worker
Call Trace:
 dump_stack_lvl+0x57/0x7d
 ubsan_epilogue+0x5/0x40
 __ubsan_handle_out_of_bounds+0x69/0x80
 ? memcpy+0x39/0x60
 brcmf_fweh_event_worker+0xae1/0xc00
 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 process_one_work+0x873/0x13e0
 ? lock_release+0x640/0x640
 ? pwq_dec_nr_in_flight+0x320/0x320
 ? rwlock_bug.part.0+0x90/0x90
 worker_thread+0x8b/0xd10
 ? __kthread_parkme+0xd9/0x1d0
 ? process_one_work+0x13e0/0x13e0
 kthread+0x379/0x450
 ? _raw_spin_unlock_irq+0x24/0x30
 ? set_kthread_struct+0x100/0x100
 ret_from_fork+0x1f/0x30
================================================================================
general protection fault, probably for non-canonical address 0xe5601c0020023fff: 0000 [#1] SMP KASAN
KASAN: maybe wild-memory-access in range [0x2b0100010011fff8-0x2b0100010011ffff]
CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G           O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: events brcmf_fweh_event_worker
RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100
Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00
RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000
RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50
RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809
R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045
R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 brcmf_fweh_event_worker+0x117/0xc00
 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
 ? rcu_read_lock_sched_held+0xa1/0xd0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? lockdep_hardirqs_on_prepare+0x273/0x3e0
 process_one_work+0x873/0x13e0
 ? lock_release+0x640/0x640
 ? pwq_dec_nr_in_flight+0x320/0x320
 ? rwlock_bug.part.0+0x90/0x90
 worker_thread+0x8b/0xd10
 ? __kthread_parkme+0xd9/0x1d0
 ? process_one_work+0x13e0/0x13e0
 kthread+0x379/0x450
 ? _raw_spin_unlock_irq+0x24/0x30
 ? set_kthread_struct+0x100/0x100
 ret_from_fork+0x1f/0x30
Modules linked in: 88XXau(O) 88x2bu(O)
---[ end trace 41d302138f3ff55a ]---
RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100
Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00
RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000
RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50
RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809
R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045
R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000
FS:  0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Kernel panic - not syncing: Fatal exception

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Reviewed-by: Arend van Spriel <aspriel@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dokyung Song <dokyung.song@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221021061359.GA550858@laguna
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
@@ -237,6 +237,10 @@ static void brcmf_fweh_event_worker(stru
 			  brcmf_fweh_event_name(event->code), event->code,
 			  event->emsg.ifidx, event->emsg.bsscfgidx,
 			  event->emsg.addr);
+		if (event->emsg.bsscfgidx >= BRCMF_MAX_IFS) {
+			brcmf_err("invalid bsscfg index: %u\n", event->emsg.bsscfgidx);
+			goto event_free;
+		}
 
 		/* convert event message */
 		emsg_be = &event->emsg;

Re: [PATCH 4.9 00/30] 4.9.333-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 661 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.9.333 release.
> There are 30 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.9.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.9 00/30] 4.9.333-rc1 review

[Florian Fainelli]

On 11/8/2022 5:38 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.333 release.
> There are 30 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 10 Nov 2022 13:33:17 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.333-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 4.9 00/30] 4.9.333-rc1 review

[Guenter Roeck]

On Tue, Nov 08, 2022 at 02:38:48PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.333 release.
> There are 30 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 10 Nov 2022 13:33:17 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 164 pass: 164 fail: 0
Qemu test results:
	total: 395 pass: 395 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.9 00/30] 4.9.333-rc1 review

[Jon Hunter]

On Tue, 08 Nov 2022 14:38:48 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.333 release.
> There are 30 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 10 Nov 2022 13:33:17 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.333-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version:	4.9.333-rc1-g2f583ceb0e80
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.9 00/30] 4.9.333-rc1 review

[Naresh Kamboju]

On Tue, 8 Nov 2022 at 19:11, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.333 release.
> There are 30 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 10 Nov 2022 13:33:17 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.333-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.9.333-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.9.y
* git commit: 2f583ceb0e8087ea02cfa74537a54532dd9b3d0c
* git describe: v4.9.332-31-g2f583ceb0e80
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.332-31-g2f583ceb0e80

## Test Regressions (compared to v4.9.332-20-g6ba04d5b05d0)

## Metric Regressions (compared to v4.9.332-20-g6ba04d5b05d0)

## Test Fixes (compared to v4.9.332-20-g6ba04d5b05d0)

## Metric Fixes (compared to v4.9.332-20-g6ba04d5b05d0)

## Test result summary
total: 102350, pass: 85472, fail: 1553, skip: 14404, xfail: 921

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 280 total, 277 passed, 3 failed
* arm64: 51 total, 46 passed, 5 failed
* i386: 29 total, 28 passed, 1 failed
* mips: 41 total, 40 passed, 1 failed
* parisc: 12 total, 0 passed, 12 failed
* powerpc: 45 total, 19 passed, 26 failed
* s390: 15 total, 11 passed, 4 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 48 total, 47 passed, 1 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-net-forwarding
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.9 00/30] 4.9.333-rc1 review

[Shuah Khan]

On 11/8/22 06:38, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.333 release.
> There are 30 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 10 Nov 2022 13:33:17 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.333-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah