From: Julien Panis <jpanis@baylibre.com> To: nm@ti.com, vigneshr@ti.com, afd@ti.com, kristo@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 1/2] arm64: dts: ti: k3-am62: add watchdog nodes Date: Wed, 9 Nov 2022 10:30:25 +0100 [thread overview] Message-ID: <20221109093026.103790-2-jpanis@baylibre.com> (raw) In-Reply-To: <20221109093026.103790-1-jpanis@baylibre.com> Add nodes for watchdogs : - 5 in main domain - 1 in MCU domain - 1 in wakeup domain Signed-off-by: Julien Panis <jpanis@baylibre.com> --- arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 45 ++++++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi | 9 +++++ arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 11 ++++++ 3 files changed, 65 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 03660476364f..fb8480d7cf76 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -591,6 +591,51 @@ main_mcan0: can@20701000 { bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; }; + main_rti0: watchdog@e000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e000000 0x00 0x100>; + clocks = <&k3_clks 125 0>; + power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 125 0>; + assigned-clock-parents = <&k3_clks 125 2>; + }; + + main_rti1: watchdog@e010000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e010000 0x00 0x100>; + clocks = <&k3_clks 126 0>; + power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 126 0>; + assigned-clock-parents = <&k3_clks 126 2>; + }; + + main_rti2: watchdog@e020000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e020000 0x00 0x100>; + clocks = <&k3_clks 127 0>; + power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 127 0>; + assigned-clock-parents = <&k3_clks 127 2>; + }; + + main_rti3: watchdog@e030000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e030000 0x00 0x100>; + clocks = <&k3_clks 128 0>; + power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 128 0>; + assigned-clock-parents = <&k3_clks 128 2>; + }; + + main_rti15: watchdog@e0f0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e0f0000 0x00 0x100>; + clocks = <&k3_clks 130 0>; + power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 130 0>; + assigned-clock-parents = <&k3_clks 130 2>; + }; + epwm0: pwm@23000000 { compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi index f56c803560f2..f82e94def774 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi @@ -81,4 +81,13 @@ mcu_gpio0: gpio@4201000 { clocks = <&k3_clks 79 0>; clock-names = "gpio"; }; + + mcu_rti0: watchdog@4880000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x04880000 0x00 0x100>; + clocks = <&k3_clks 131 0>; + power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 131 0>; + assigned-clock-parents = <&k3_clks 131 2>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi index 4090134676cf..7d5bc9dfe51d 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi @@ -38,4 +38,15 @@ wkup_i2c0: i2c@2b200000 { clocks = <&k3_clks 107 4>; clock-names = "fck"; }; + + wkup_rti0: watchdog@2b000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2b000000 0x00 0x100>; + clocks = <&k3_clks 132 0>; + power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 132 0>; + assigned-clock-parents = <&k3_clks 132 2>; + /* WKUP RTI0 is used by DM firmware */ + status = "reserved"; + }; }; -- 2.37.3
WARNING: multiple messages have this Message-ID (diff)
From: Julien Panis <jpanis@baylibre.com> To: nm@ti.com, vigneshr@ti.com, afd@ti.com, kristo@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 1/2] arm64: dts: ti: k3-am62: add watchdog nodes Date: Wed, 9 Nov 2022 10:30:25 +0100 [thread overview] Message-ID: <20221109093026.103790-2-jpanis@baylibre.com> (raw) In-Reply-To: <20221109093026.103790-1-jpanis@baylibre.com> Add nodes for watchdogs : - 5 in main domain - 1 in MCU domain - 1 in wakeup domain Signed-off-by: Julien Panis <jpanis@baylibre.com> --- arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 45 ++++++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi | 9 +++++ arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 11 ++++++ 3 files changed, 65 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 03660476364f..fb8480d7cf76 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -591,6 +591,51 @@ main_mcan0: can@20701000 { bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; }; + main_rti0: watchdog@e000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e000000 0x00 0x100>; + clocks = <&k3_clks 125 0>; + power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 125 0>; + assigned-clock-parents = <&k3_clks 125 2>; + }; + + main_rti1: watchdog@e010000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e010000 0x00 0x100>; + clocks = <&k3_clks 126 0>; + power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 126 0>; + assigned-clock-parents = <&k3_clks 126 2>; + }; + + main_rti2: watchdog@e020000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e020000 0x00 0x100>; + clocks = <&k3_clks 127 0>; + power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 127 0>; + assigned-clock-parents = <&k3_clks 127 2>; + }; + + main_rti3: watchdog@e030000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e030000 0x00 0x100>; + clocks = <&k3_clks 128 0>; + power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 128 0>; + assigned-clock-parents = <&k3_clks 128 2>; + }; + + main_rti15: watchdog@e0f0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e0f0000 0x00 0x100>; + clocks = <&k3_clks 130 0>; + power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 130 0>; + assigned-clock-parents = <&k3_clks 130 2>; + }; + epwm0: pwm@23000000 { compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi index f56c803560f2..f82e94def774 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi @@ -81,4 +81,13 @@ mcu_gpio0: gpio@4201000 { clocks = <&k3_clks 79 0>; clock-names = "gpio"; }; + + mcu_rti0: watchdog@4880000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x04880000 0x00 0x100>; + clocks = <&k3_clks 131 0>; + power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 131 0>; + assigned-clock-parents = <&k3_clks 131 2>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi index 4090134676cf..7d5bc9dfe51d 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi @@ -38,4 +38,15 @@ wkup_i2c0: i2c@2b200000 { clocks = <&k3_clks 107 4>; clock-names = "fck"; }; + + wkup_rti0: watchdog@2b000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2b000000 0x00 0x100>; + clocks = <&k3_clks 132 0>; + power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 132 0>; + assigned-clock-parents = <&k3_clks 132 2>; + /* WKUP RTI0 is used by DM firmware */ + status = "reserved"; + }; }; -- 2.37.3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-11-09 9:30 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-09 9:30 [PATCH v3 0/2] AM62x watchdog support Julien Panis 2022-11-09 9:30 ` Julien Panis 2022-11-09 9:30 ` Julien Panis [this message] 2022-11-09 9:30 ` [PATCH v3 1/2] arm64: dts: ti: k3-am62: add watchdog nodes Julien Panis 2022-11-09 9:30 ` [PATCH v3 2/2] arm64: dts: ti: k3-am625-sk: mark MCU watchdog as reserved Julien Panis 2022-11-09 9:30 ` Julien Panis 2022-11-09 21:22 ` Andrew Davis 2022-11-09 21:22 ` Andrew Davis
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221109093026.103790-2-jpanis@baylibre.com \ --to=jpanis@baylibre.com \ --cc=afd@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=robh+dt@kernel.org \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.