[pull request][V3 net 00/10] mlx5 fixes 2022-11-02

[pull request][V3 net 00/10] mlx5 fixes 2022-11-02

[Saeed Mahameed]

From: Saeed Mahameed <saeedm@nvidia.com>

v2->v3:
 - toss: net/mlx5: Fix possible deadlock on mlx5e_tx_timeout_work

v1->v2:
 - Fix 32bit build issue.

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.

Thanks,
Saeed.

The following changes since commit 27c064ae14d1a80c790ce019759500c95a2a9551:

  Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf (2022-11-09 14:57:42 +0000)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git tags/mlx5-fixes-2022-11-09

for you to fetch changes up to 7f1a6d4b9e820b08479a07f6e14c36ccfa641751:

  net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions (2022-11-09 10:30:43 -0800)

----------------------------------------------------------------
mlx5-fixes-2022-11-09

----------------------------------------------------------------
Chris Mi (1):
      net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode

Jianbo Liu (1):
      net/mlx5e: TC, Fix wrong rejection of packet-per-second policing

Maxim Mikityanskiy (2):
      net/mlx5e: Add missing sanity checks for max TX WQE size
      net/mlx5e: Fix usage of DMA sync API

Roi Dayan (3):
      net/mlx5e: Fix tc acts array not to be dependent on enum order
      net/mlx5e: E-Switch, Fix comparing termination table instance
      net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions

Roy Novich (1):
      net/mlx5: Allow async trigger completion execution on single CPU systems

Shay Drory (1):
      net/mlx5: fw_reset: Don't try to load device in case PCI isn't working

Vlad Buslov (1):
      net/mlx5: Bridge, verify LAG state when adding bond to bridge

 drivers/net/ethernet/mellanox/mlx5/core/cmd.c      | 11 ++-
 .../ethernet/mellanox/mlx5/core/en/rep/bridge.c    | 31 ++++++++
 .../ethernet/mellanox/mlx5/core/en/tc/act/act.c    | 92 ++++++++--------------
 drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h  | 24 +++++-
 drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c   |  4 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |  7 ++
 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c    | 27 ++++---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c    | 14 ++--
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c    |  5 ++
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c  | 14 ++--
 .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 18 +----
 .../mellanox/mlx5/core/eswitch_offloads_termtbl.c  | 14 ++--
 drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c |  3 +-
 13 files changed, 149 insertions(+), 115 deletions(-)

[V3 net 01/10] net/mlx5: Bridge, verify LAG state when adding bond to bridge

[Saeed Mahameed]

From: Vlad Buslov <vladbu@nvidia.com>

Mlx5 LAG is initialized asynchronously on a workqueue which means that for
a brief moment after setting mlx5 UL representors as lower devices of a
bond netdevice the LAG itself is not fully initialized in the driver. When
adding such bond device to a bridge mlx5 bridge code will not consider it
as offload-capable, skip creating necessary bookkeeping and fail any
further bridge offload-related commands with it (setting VLANs, offloading
FDBs, etc.). In order to make the error explicit during bridge
initialization stage implement the code that detects such condition during
NETDEV_PRECHANGEUPPER event and returns an error.

Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../mellanox/mlx5/core/en/rep/bridge.c        | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c
index 39ef2a2561a3..8099a21e674c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c
@@ -164,6 +164,36 @@ static int mlx5_esw_bridge_port_changeupper(struct notifier_block *nb, void *ptr
 	return err;
 }
 
+static int
+mlx5_esw_bridge_changeupper_validate_netdev(void *ptr)
+{
+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+	struct netdev_notifier_changeupper_info *info = ptr;
+	struct net_device *upper = info->upper_dev;
+	struct net_device *lower;
+	struct list_head *iter;
+
+	if (!netif_is_bridge_master(upper) || !netif_is_lag_master(dev))
+		return 0;
+
+	netdev_for_each_lower_dev(dev, lower, iter) {
+		struct mlx5_core_dev *mdev;
+		struct mlx5e_priv *priv;
+
+		if (!mlx5e_eswitch_rep(lower))
+			continue;
+
+		priv = netdev_priv(lower);
+		mdev = priv->mdev;
+		if (!mlx5_lag_is_active(mdev))
+			return -EAGAIN;
+		if (!mlx5_lag_is_shared_fdb(mdev))
+			return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
 static int mlx5_esw_bridge_switchdev_port_event(struct notifier_block *nb,
 						unsigned long event, void *ptr)
 {
@@ -171,6 +201,7 @@ static int mlx5_esw_bridge_switchdev_port_event(struct notifier_block *nb,
 
 	switch (event) {
 	case NETDEV_PRECHANGEUPPER:
+		err = mlx5_esw_bridge_changeupper_validate_netdev(ptr);
 		break;
 
 	case NETDEV_CHANGEUPPER:
-- 
2.38.1

Re: [V3 net 01/10] net/mlx5: Bridge, verify LAG state when adding bond to bridge

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net.git (master)
by Saeed Mahameed <saeedm@nvidia.com>:

On Wed,  9 Nov 2022 10:40:41 -0800 you wrote:
> From: Vlad Buslov <vladbu@nvidia.com>
> 
> Mlx5 LAG is initialized asynchronously on a workqueue which means that for
> a brief moment after setting mlx5 UL representors as lower devices of a
> bond netdevice the LAG itself is not fully initialized in the driver. When
> adding such bond device to a bridge mlx5 bridge code will not consider it
> as offload-capable, skip creating necessary bookkeeping and fail any
> further bridge offload-related commands with it (setting VLANs, offloading
> FDBs, etc.). In order to make the error explicit during bridge
> initialization stage implement the code that detects such condition during
> NETDEV_PRECHANGEUPPER event and returns an error.
> 
> [...]

Here is the summary with links:
  - [V3,net,01/10] net/mlx5: Bridge, verify LAG state when adding bond to bridge
    https://git.kernel.org/netdev/net/c/15f8f168952f
  - [V3,net,02/10] net/mlx5: Allow async trigger completion execution on single CPU systems
    https://git.kernel.org/netdev/net/c/2808b37b5928
  - [V3,net,03/10] net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode
    https://git.kernel.org/netdev/net/c/e12de39c07a7
  - [V3,net,04/10] net/mlx5: fw_reset: Don't try to load device in case PCI isn't working
    https://git.kernel.org/netdev/net/c/7d167b4a4c81
  - [V3,net,05/10] net/mlx5e: Add missing sanity checks for max TX WQE size
    https://git.kernel.org/netdev/net/c/f9c955b4fe5c
  - [V3,net,06/10] net/mlx5e: Fix usage of DMA sync API
    https://git.kernel.org/netdev/net/c/8d4b475e9d0f
  - [V3,net,07/10] net/mlx5e: Fix tc acts array not to be dependent on enum order
    https://git.kernel.org/netdev/net/c/08912ea799cd
  - [V3,net,08/10] net/mlx5e: TC, Fix wrong rejection of packet-per-second policing
    https://git.kernel.org/netdev/net/c/9e0643084136
  - [V3,net,09/10] net/mlx5e: E-Switch, Fix comparing termination table instance
    https://git.kernel.org/netdev/net/c/f4f4096b410e
  - [V3,net,10/10] net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
    https://git.kernel.org/netdev/net/c/7f1a6d4b9e82

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

[V3 net 02/10] net/mlx5: Allow async trigger completion execution on single CPU systems

[Saeed Mahameed]

From: Roy Novich <royno@nvidia.com>

For a single CPU system, the kernel thread executing mlx5_cmd_flush()
never releases the CPU but calls down_trylock(&cmd→sem) in a busy loop.
On a single processor system, this leads to a deadlock as the kernel
thread which executes mlx5_cmd_invoke() never gets scheduled. Fix this,
by adding the cond_resched() call to the loop, allow the command
completion kernel thread to execute.

Fixes: 8e715cd613a1 ("net/mlx5: Set command entry semaphore up once got index free")
Signed-off-by: Alexander Schmidt <alexschm@de.ibm.com>
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index 46ba4c2faad2..2e0d59ca62b5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -1770,12 +1770,17 @@ void mlx5_cmd_flush(struct mlx5_core_dev *dev)
 	struct mlx5_cmd *cmd = &dev->cmd;
 	int i;
 
-	for (i = 0; i < cmd->max_reg_cmds; i++)
-		while (down_trylock(&cmd->sem))
+	for (i = 0; i < cmd->max_reg_cmds; i++) {
+		while (down_trylock(&cmd->sem)) {
 			mlx5_cmd_trigger_completions(dev);
+			cond_resched();
+		}
+	}
 
-	while (down_trylock(&cmd->pages_sem))
+	while (down_trylock(&cmd->pages_sem)) {
 		mlx5_cmd_trigger_completions(dev);
+		cond_resched();
+	}
 
 	/* Unlock cmdif */
 	up(&cmd->pages_sem);
-- 
2.38.1

[V3 net 03/10] net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode

[Saeed Mahameed]

From: Chris Mi <cmi@nvidia.com>

No need to rollback to the other mode because probably will fail
again. Just set to legacy mode and clear fdb table created flag.
So that fdb table will not be cleared again.

Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../net/ethernet/mellanox/mlx5/core/eswitch.c  | 14 ++++++++------
 .../mellanox/mlx5/core/eswitch_offloads.c      | 18 +++---------------
 2 files changed, 11 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index c59107fa9e6d..2169486c4bfb 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -1387,12 +1387,14 @@ void mlx5_eswitch_disable_locked(struct mlx5_eswitch *esw)
 		 esw->mode == MLX5_ESWITCH_LEGACY ? "LEGACY" : "OFFLOADS",
 		 esw->esw_funcs.num_vfs, esw->enabled_vports);
 
-	esw->fdb_table.flags &= ~MLX5_ESW_FDB_CREATED;
-	if (esw->mode == MLX5_ESWITCH_OFFLOADS)
-		esw_offloads_disable(esw);
-	else if (esw->mode == MLX5_ESWITCH_LEGACY)
-		esw_legacy_disable(esw);
-	mlx5_esw_acls_ns_cleanup(esw);
+	if (esw->fdb_table.flags & MLX5_ESW_FDB_CREATED) {
+		esw->fdb_table.flags &= ~MLX5_ESW_FDB_CREATED;
+		if (esw->mode == MLX5_ESWITCH_OFFLOADS)
+			esw_offloads_disable(esw);
+		else if (esw->mode == MLX5_ESWITCH_LEGACY)
+			esw_legacy_disable(esw);
+		mlx5_esw_acls_ns_cleanup(esw);
+	}
 
 	if (esw->mode == MLX5_ESWITCH_OFFLOADS)
 		devl_rate_nodes_destroy(devlink);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 4e50df3139c6..728ca9f2bb9d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -2310,7 +2310,7 @@ static int esw_create_restore_table(struct mlx5_eswitch *esw)
 static int esw_offloads_start(struct mlx5_eswitch *esw,
 			      struct netlink_ext_ack *extack)
 {
-	int err, err1;
+	int err;
 
 	esw->mode = MLX5_ESWITCH_OFFLOADS;
 	err = mlx5_eswitch_enable_locked(esw, esw->dev->priv.sriov.num_vfs);
@@ -2318,11 +2318,6 @@ static int esw_offloads_start(struct mlx5_eswitch *esw,
 		NL_SET_ERR_MSG_MOD(extack,
 				   "Failed setting eswitch to offloads");
 		esw->mode = MLX5_ESWITCH_LEGACY;
-		err1 = mlx5_eswitch_enable_locked(esw, MLX5_ESWITCH_IGNORE_NUM_VFS);
-		if (err1) {
-			NL_SET_ERR_MSG_MOD(extack,
-					   "Failed setting eswitch back to legacy");
-		}
 		mlx5_rescan_drivers(esw->dev);
 	}
 	if (esw->offloads.inline_mode == MLX5_INLINE_MODE_NONE) {
@@ -3389,19 +3384,12 @@ int esw_offloads_enable(struct mlx5_eswitch *esw)
 static int esw_offloads_stop(struct mlx5_eswitch *esw,
 			     struct netlink_ext_ack *extack)
 {
-	int err, err1;
+	int err;
 
 	esw->mode = MLX5_ESWITCH_LEGACY;
 	err = mlx5_eswitch_enable_locked(esw, MLX5_ESWITCH_IGNORE_NUM_VFS);
-	if (err) {
+	if (err)
 		NL_SET_ERR_MSG_MOD(extack, "Failed setting eswitch to legacy");
-		esw->mode = MLX5_ESWITCH_OFFLOADS;
-		err1 = mlx5_eswitch_enable_locked(esw, MLX5_ESWITCH_IGNORE_NUM_VFS);
-		if (err1) {
-			NL_SET_ERR_MSG_MOD(extack,
-					   "Failed setting eswitch back to offloads");
-		}
-	}
 
 	return err;
 }
-- 
2.38.1

[V3 net 04/10] net/mlx5: fw_reset: Don't try to load device in case PCI isn't working

[Saeed Mahameed]

From: Shay Drory <shayd@nvidia.com>

In case PCI reads fail after unload, there is no use in trying to
load the device.

Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
index 07c583996c29..9d908a0ccfef 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
@@ -152,7 +152,8 @@ static void mlx5_fw_reset_complete_reload(struct mlx5_core_dev *dev)
 		mlx5_unload_one(dev);
 		if (mlx5_health_wait_pci_up(dev))
 			mlx5_core_err(dev, "reset reload flow aborted, PCI reads still not working\n");
-		mlx5_load_one(dev, false);
+		else
+			mlx5_load_one(dev, false);
 		devlink_remote_reload_actions_performed(priv_to_devlink(dev), 0,
 							BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
 							BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE));
-- 
2.38.1

[V3 net 05/10] net/mlx5e: Add missing sanity checks for max TX WQE size

[Saeed Mahameed]

From: Maxim Mikityanskiy <maximmi@nvidia.com>

The commit cited below started using the firmware capability for the
maximum TX WQE size. This commit adds an important check to verify that
the driver doesn't attempt to exceed this capability, and also restores
another check mistakenly removed in the cited commit (a WQE must not
exceed the page size).

Fixes: c27bd1718c06 ("net/mlx5e: Read max WQEBBs on the SQ from firmware")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../net/ethernet/mellanox/mlx5/core/en/txrx.h | 24 ++++++++++++++++++-
 .../net/ethernet/mellanox/mlx5/core/en_main.c |  7 ++++++
 .../net/ethernet/mellanox/mlx5/core/en_tx.c   |  5 ++++
 3 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
index cb164b62f543..853f312cd757 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
@@ -11,6 +11,27 @@
 
 #define INL_HDR_START_SZ (sizeof(((struct mlx5_wqe_eth_seg *)NULL)->inline_hdr.start))
 
+/* IPSEC inline data includes:
+ * 1. ESP trailer: up to 255 bytes of padding, 1 byte for pad length, 1 byte for
+ *    next header.
+ * 2. ESP authentication data: 16 bytes for ICV.
+ */
+#define MLX5E_MAX_TX_IPSEC_DS DIV_ROUND_UP(sizeof(struct mlx5_wqe_inline_seg) + \
+					   255 + 1 + 1 + 16, MLX5_SEND_WQE_DS)
+
+/* 366 should be big enough to cover all L2, L3 and L4 headers with possible
+ * encapsulations.
+ */
+#define MLX5E_MAX_TX_INLINE_DS DIV_ROUND_UP(366 - INL_HDR_START_SZ + VLAN_HLEN, \
+					    MLX5_SEND_WQE_DS)
+
+/* Sync the calculation with mlx5e_sq_calc_wqe_attr. */
+#define MLX5E_MAX_TX_WQEBBS DIV_ROUND_UP(MLX5E_TX_WQE_EMPTY_DS_COUNT + \
+					 MLX5E_MAX_TX_INLINE_DS + \
+					 MLX5E_MAX_TX_IPSEC_DS + \
+					 MAX_SKB_FRAGS + 1, \
+					 MLX5_SEND_WQEBB_NUM_DS)
+
 #define MLX5E_RX_ERR_CQE(cqe) (get_cqe_opcode(cqe) != MLX5_CQE_RESP_SEND)
 
 static inline
@@ -424,6 +445,8 @@ mlx5e_set_eseg_swp(struct sk_buff *skb, struct mlx5_wqe_eth_seg *eseg,
 
 static inline u16 mlx5e_stop_room_for_wqe(struct mlx5_core_dev *mdev, u16 wqe_size)
 {
+	WARN_ON_ONCE(PAGE_SIZE / MLX5_SEND_WQE_BB < mlx5e_get_max_sq_wqebbs(mdev));
+
 	/* A WQE must not cross the page boundary, hence two conditions:
 	 * 1. Its size must not exceed the page size.
 	 * 2. If the WQE size is X, and the space remaining in a page is less
@@ -436,7 +459,6 @@ static inline u16 mlx5e_stop_room_for_wqe(struct mlx5_core_dev *mdev, u16 wqe_si
 		  "wqe_size %u is greater than max SQ WQEBBs %u",
 		  wqe_size, mlx5e_get_max_sq_wqebbs(mdev));
 
-
 	return MLX5E_STOP_ROOM(wqe_size);
 }
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 364f04309149..e3a4f01bcceb 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -5694,6 +5694,13 @@ int mlx5e_attach_netdev(struct mlx5e_priv *priv)
 		mlx5e_fs_set_state_destroy(priv->fs,
 					   !test_bit(MLX5E_STATE_DESTROYING, &priv->state));
 
+	/* Validate the max_wqe_size_sq capability. */
+	if (WARN_ON_ONCE(mlx5e_get_max_sq_wqebbs(priv->mdev) < MLX5E_MAX_TX_WQEBBS)) {
+		mlx5_core_warn(priv->mdev, "MLX5E: Max SQ WQEBBs firmware capability: %u, needed %lu\n",
+			       mlx5e_get_max_sq_wqebbs(priv->mdev), MLX5E_MAX_TX_WQEBBS);
+		return -EIO;
+	}
+
 	/* max number of channels may have changed */
 	max_nch = mlx5e_calc_max_nch(priv->mdev, priv->netdev, profile);
 	if (priv->channels.params.num_channels > max_nch) {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index 6adca01fbdc9..f7897ddb29c5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -305,6 +305,8 @@ static void mlx5e_sq_calc_wqe_attr(struct sk_buff *skb, const struct mlx5e_tx_at
 	u16 ds_cnt_inl = 0;
 	u16 ds_cnt_ids = 0;
 
+	/* Sync the calculation with MLX5E_MAX_TX_WQEBBS. */
+
 	if (attr->insz)
 		ds_cnt_ids = DIV_ROUND_UP(sizeof(struct mlx5_wqe_inline_seg) + attr->insz,
 					  MLX5_SEND_WQE_DS);
@@ -317,6 +319,9 @@ static void mlx5e_sq_calc_wqe_attr(struct sk_buff *skb, const struct mlx5e_tx_at
 			inl += VLAN_HLEN;
 
 		ds_cnt_inl = DIV_ROUND_UP(inl, MLX5_SEND_WQE_DS);
+		if (WARN_ON_ONCE(ds_cnt_inl > MLX5E_MAX_TX_INLINE_DS))
+			netdev_warn(skb->dev, "ds_cnt_inl = %u > max %u\n", ds_cnt_inl,
+				    (u16)MLX5E_MAX_TX_INLINE_DS);
 		ds_cnt += ds_cnt_inl;
 	}
 
-- 
2.38.1

[V3 net 06/10] net/mlx5e: Fix usage of DMA sync API

[Saeed Mahameed]

From: Maxim Mikityanskiy <maximmi@nvidia.com>

DMA sync functions should use the same direction that was used by DMA
mapping. Use DMA_BIDIRECTIONAL for XDP_TX from regular RQ, which reuses
the same mapping that was used for RX, and DMA_TO_DEVICE for XDP_TX from
XSK RQ and XDP_REDIRECT, which establish a new mapping in this
direction. On the RX side, use the same direction that was used when
setting up the mapping (DMA_BIDIRECTIONAL for XDP, DMA_FROM_DEVICE
otherwise).

Also don't skip sync for device when establishing a DMA_FROM_DEVICE
mapping for RX, as some architectures (ARM) may require invalidating
caches before the device can use the mapping. It doesn't break the
bugfix made in
commit 0b7cfa4082fb ("net/mlx5e: Fix page DMA map/unmap attributes"),
since the bug happened on unmap.

Fixes: 0b7cfa4082fb ("net/mlx5e: Fix page DMA map/unmap attributes")
Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../net/ethernet/mellanox/mlx5/core/en/xdp.c  |  4 +--
 .../net/ethernet/mellanox/mlx5/core/en_rx.c   | 27 ++++++++++---------
 2 files changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c
index 4685c652c97e..20507ef2f956 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c
@@ -117,7 +117,7 @@ mlx5e_xmit_xdp_buff(struct mlx5e_xdpsq *sq, struct mlx5e_rq *rq,
 	xdpi.page.rq = rq;
 
 	dma_addr = page_pool_get_dma_addr(page) + (xdpf->data - (void *)xdpf);
-	dma_sync_single_for_device(sq->pdev, dma_addr, xdptxd.len, DMA_TO_DEVICE);
+	dma_sync_single_for_device(sq->pdev, dma_addr, xdptxd.len, DMA_BIDIRECTIONAL);
 
 	if (unlikely(xdp_frame_has_frags(xdpf))) {
 		sinfo = xdp_get_shared_info_from_frame(xdpf);
@@ -131,7 +131,7 @@ mlx5e_xmit_xdp_buff(struct mlx5e_xdpsq *sq, struct mlx5e_rq *rq,
 				skb_frag_off(frag);
 			len = skb_frag_size(frag);
 			dma_sync_single_for_device(sq->pdev, addr, len,
-						   DMA_TO_DEVICE);
+						   DMA_BIDIRECTIONAL);
 		}
 	}
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
index 58084650151f..a61a43fc8d5c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -266,7 +266,7 @@ static inline bool mlx5e_rx_cache_get(struct mlx5e_rq *rq, union mlx5e_alloc_uni
 
 	addr = page_pool_get_dma_addr(au->page);
 	/* Non-XSK always uses PAGE_SIZE. */
-	dma_sync_single_for_device(rq->pdev, addr, PAGE_SIZE, DMA_FROM_DEVICE);
+	dma_sync_single_for_device(rq->pdev, addr, PAGE_SIZE, rq->buff.map_dir);
 	return true;
 }
 
@@ -282,8 +282,7 @@ static inline int mlx5e_page_alloc_pool(struct mlx5e_rq *rq, union mlx5e_alloc_u
 		return -ENOMEM;
 
 	/* Non-XSK always uses PAGE_SIZE. */
-	addr = dma_map_page_attrs(rq->pdev, au->page, 0, PAGE_SIZE,
-				  rq->buff.map_dir, DMA_ATTR_SKIP_CPU_SYNC);
+	addr = dma_map_page(rq->pdev, au->page, 0, PAGE_SIZE, rq->buff.map_dir);
 	if (unlikely(dma_mapping_error(rq->pdev, addr))) {
 		page_pool_recycle_direct(rq->page_pool, au->page);
 		au->page = NULL;
@@ -427,14 +426,15 @@ mlx5e_add_skb_frag(struct mlx5e_rq *rq, struct sk_buff *skb,
 {
 	dma_addr_t addr = page_pool_get_dma_addr(au->page);
 
-	dma_sync_single_for_cpu(rq->pdev, addr + frag_offset, len, DMA_FROM_DEVICE);
+	dma_sync_single_for_cpu(rq->pdev, addr + frag_offset, len,
+				rq->buff.map_dir);
 	page_ref_inc(au->page);
 	skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
 			au->page, frag_offset, len, truesize);
 }
 
 static inline void
-mlx5e_copy_skb_header(struct device *pdev, struct sk_buff *skb,
+mlx5e_copy_skb_header(struct mlx5e_rq *rq, struct sk_buff *skb,
 		      struct page *page, dma_addr_t addr,
 		      int offset_from, int dma_offset, u32 headlen)
 {
@@ -442,7 +442,8 @@ mlx5e_copy_skb_header(struct device *pdev, struct sk_buff *skb,
 	/* Aligning len to sizeof(long) optimizes memcpy performance */
 	unsigned int len = ALIGN(headlen, sizeof(long));
 
-	dma_sync_single_for_cpu(pdev, addr + dma_offset, len, DMA_FROM_DEVICE);
+	dma_sync_single_for_cpu(rq->pdev, addr + dma_offset, len,
+				rq->buff.map_dir);
 	skb_copy_to_linear_data(skb, from, len);
 }
 
@@ -1538,7 +1539,7 @@ mlx5e_skb_from_cqe_linear(struct mlx5e_rq *rq, struct mlx5e_wqe_frag_info *wi,
 
 	addr = page_pool_get_dma_addr(au->page);
 	dma_sync_single_range_for_cpu(rq->pdev, addr, wi->offset,
-				      frag_size, DMA_FROM_DEVICE);
+				      frag_size, rq->buff.map_dir);
 	net_prefetch(data);
 
 	prog = rcu_dereference(rq->xdp_prog);
@@ -1587,7 +1588,7 @@ mlx5e_skb_from_cqe_nonlinear(struct mlx5e_rq *rq, struct mlx5e_wqe_frag_info *wi
 
 	addr = page_pool_get_dma_addr(au->page);
 	dma_sync_single_range_for_cpu(rq->pdev, addr, wi->offset,
-				      rq->buff.frame0_sz, DMA_FROM_DEVICE);
+				      rq->buff.frame0_sz, rq->buff.map_dir);
 	net_prefetchw(va); /* xdp_frame data area */
 	net_prefetch(va + rx_headroom);
 
@@ -1608,7 +1609,7 @@ mlx5e_skb_from_cqe_nonlinear(struct mlx5e_rq *rq, struct mlx5e_wqe_frag_info *wi
 
 		addr = page_pool_get_dma_addr(au->page);
 		dma_sync_single_for_cpu(rq->pdev, addr + wi->offset,
-					frag_consumed_bytes, DMA_FROM_DEVICE);
+					frag_consumed_bytes, rq->buff.map_dir);
 
 		if (!xdp_buff_has_frags(&xdp)) {
 			/* Init on the first fragment to avoid cold cache access
@@ -1905,7 +1906,7 @@ mlx5e_skb_from_cqe_mpwrq_nonlinear(struct mlx5e_rq *rq, struct mlx5e_mpw_info *w
 	mlx5e_fill_skb_data(skb, rq, au, byte_cnt, frag_offset);
 	/* copy header */
 	addr = page_pool_get_dma_addr(head_au->page);
-	mlx5e_copy_skb_header(rq->pdev, skb, head_au->page, addr,
+	mlx5e_copy_skb_header(rq, skb, head_au->page, addr,
 			      head_offset, head_offset, headlen);
 	/* skb linear part was allocated with headlen and aligned to long */
 	skb->tail += headlen;
@@ -1939,7 +1940,7 @@ mlx5e_skb_from_cqe_mpwrq_linear(struct mlx5e_rq *rq, struct mlx5e_mpw_info *wi,
 
 	addr = page_pool_get_dma_addr(au->page);
 	dma_sync_single_range_for_cpu(rq->pdev, addr, head_offset,
-				      frag_size, DMA_FROM_DEVICE);
+				      frag_size, rq->buff.map_dir);
 	net_prefetch(data);
 
 	prog = rcu_dereference(rq->xdp_prog);
@@ -1987,7 +1988,7 @@ mlx5e_skb_from_cqe_shampo(struct mlx5e_rq *rq, struct mlx5e_mpw_info *wi,
 
 	if (likely(frag_size <= BIT(MLX5E_SHAMPO_LOG_MAX_HEADER_ENTRY_SIZE))) {
 		/* build SKB around header */
-		dma_sync_single_range_for_cpu(rq->pdev, head->addr, 0, frag_size, DMA_FROM_DEVICE);
+		dma_sync_single_range_for_cpu(rq->pdev, head->addr, 0, frag_size, rq->buff.map_dir);
 		prefetchw(hdr);
 		prefetch(data);
 		skb = mlx5e_build_linear_skb(rq, hdr, frag_size, rx_headroom, head_size, 0);
@@ -2009,7 +2010,7 @@ mlx5e_skb_from_cqe_shampo(struct mlx5e_rq *rq, struct mlx5e_mpw_info *wi,
 		}
 
 		prefetchw(skb->data);
-		mlx5e_copy_skb_header(rq->pdev, skb, head->page, head->addr,
+		mlx5e_copy_skb_header(rq, skb, head->page, head->addr,
 				      head_offset + rx_headroom,
 				      rx_headroom, head_size);
 		/* skb linear part was allocated with headlen and aligned to long */
-- 
2.38.1

[V3 net 07/10] net/mlx5e: Fix tc acts array not to be dependent on enum order

[Saeed Mahameed]

From: Roi Dayan <roid@nvidia.com>

The tc acts array should not be dependent on kernel internal
flow action id enum. Fix the array initialization.

Fixes: fad547906980 ("net/mlx5e: Add tc action infrastructure")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../mellanox/mlx5/core/en/tc/act/act.c        | 92 +++++++------------
 1 file changed, 32 insertions(+), 60 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.c
index 305fde62a78d..3337241cfd84 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.c
@@ -6,70 +6,42 @@
 #include "en/tc_priv.h"
 #include "mlx5_core.h"
 
-/* Must be aligned with enum flow_action_id. */
 static struct mlx5e_tc_act *tc_acts_fdb[NUM_FLOW_ACTIONS] = {
-	&mlx5e_tc_act_accept,
-	&mlx5e_tc_act_drop,
-	&mlx5e_tc_act_trap,
-	&mlx5e_tc_act_goto,
-	&mlx5e_tc_act_mirred,
-	&mlx5e_tc_act_mirred,
-	&mlx5e_tc_act_redirect_ingress,
-	NULL, /* FLOW_ACTION_MIRRED_INGRESS, */
-	&mlx5e_tc_act_vlan,
-	&mlx5e_tc_act_vlan,
-	&mlx5e_tc_act_vlan_mangle,
-	&mlx5e_tc_act_tun_encap,
-	&mlx5e_tc_act_tun_decap,
-	&mlx5e_tc_act_pedit,
-	&mlx5e_tc_act_pedit,
-	&mlx5e_tc_act_csum,
-	NULL, /* FLOW_ACTION_MARK, */
-	&mlx5e_tc_act_ptype,
-	NULL, /* FLOW_ACTION_PRIORITY, */
-	NULL, /* FLOW_ACTION_WAKE, */
-	NULL, /* FLOW_ACTION_QUEUE, */
-	&mlx5e_tc_act_sample,
-	&mlx5e_tc_act_police,
-	&mlx5e_tc_act_ct,
-	NULL, /* FLOW_ACTION_CT_METADATA, */
-	&mlx5e_tc_act_mpls_push,
-	&mlx5e_tc_act_mpls_pop,
-	NULL, /* FLOW_ACTION_MPLS_MANGLE, */
-	NULL, /* FLOW_ACTION_GATE, */
-	NULL, /* FLOW_ACTION_PPPOE_PUSH, */
-	NULL, /* FLOW_ACTION_JUMP, */
-	NULL, /* FLOW_ACTION_PIPE, */
-	&mlx5e_tc_act_vlan,
-	&mlx5e_tc_act_vlan,
+	[FLOW_ACTION_ACCEPT] = &mlx5e_tc_act_accept,
+	[FLOW_ACTION_DROP] = &mlx5e_tc_act_drop,
+	[FLOW_ACTION_TRAP] = &mlx5e_tc_act_trap,
+	[FLOW_ACTION_GOTO] = &mlx5e_tc_act_goto,
+	[FLOW_ACTION_REDIRECT] = &mlx5e_tc_act_mirred,
+	[FLOW_ACTION_MIRRED] = &mlx5e_tc_act_mirred,
+	[FLOW_ACTION_REDIRECT_INGRESS] = &mlx5e_tc_act_redirect_ingress,
+	[FLOW_ACTION_VLAN_PUSH] = &mlx5e_tc_act_vlan,
+	[FLOW_ACTION_VLAN_POP] = &mlx5e_tc_act_vlan,
+	[FLOW_ACTION_VLAN_MANGLE] = &mlx5e_tc_act_vlan_mangle,
+	[FLOW_ACTION_TUNNEL_ENCAP] = &mlx5e_tc_act_tun_encap,
+	[FLOW_ACTION_TUNNEL_DECAP] = &mlx5e_tc_act_tun_decap,
+	[FLOW_ACTION_MANGLE] = &mlx5e_tc_act_pedit,
+	[FLOW_ACTION_ADD] = &mlx5e_tc_act_pedit,
+	[FLOW_ACTION_CSUM] = &mlx5e_tc_act_csum,
+	[FLOW_ACTION_PTYPE] = &mlx5e_tc_act_ptype,
+	[FLOW_ACTION_SAMPLE] = &mlx5e_tc_act_sample,
+	[FLOW_ACTION_POLICE] = &mlx5e_tc_act_police,
+	[FLOW_ACTION_CT] = &mlx5e_tc_act_ct,
+	[FLOW_ACTION_MPLS_PUSH] = &mlx5e_tc_act_mpls_push,
+	[FLOW_ACTION_MPLS_POP] = &mlx5e_tc_act_mpls_pop,
+	[FLOW_ACTION_VLAN_PUSH_ETH] = &mlx5e_tc_act_vlan,
+	[FLOW_ACTION_VLAN_POP_ETH] = &mlx5e_tc_act_vlan,
 };
 
-/* Must be aligned with enum flow_action_id. */
 static struct mlx5e_tc_act *tc_acts_nic[NUM_FLOW_ACTIONS] = {
-	&mlx5e_tc_act_accept,
-	&mlx5e_tc_act_drop,
-	NULL, /* FLOW_ACTION_TRAP, */
-	&mlx5e_tc_act_goto,
-	&mlx5e_tc_act_mirred_nic,
-	NULL, /* FLOW_ACTION_MIRRED, */
-	NULL, /* FLOW_ACTION_REDIRECT_INGRESS, */
-	NULL, /* FLOW_ACTION_MIRRED_INGRESS, */
-	NULL, /* FLOW_ACTION_VLAN_PUSH, */
-	NULL, /* FLOW_ACTION_VLAN_POP, */
-	NULL, /* FLOW_ACTION_VLAN_MANGLE, */
-	NULL, /* FLOW_ACTION_TUNNEL_ENCAP, */
-	NULL, /* FLOW_ACTION_TUNNEL_DECAP, */
-	&mlx5e_tc_act_pedit,
-	&mlx5e_tc_act_pedit,
-	&mlx5e_tc_act_csum,
-	&mlx5e_tc_act_mark,
-	NULL, /* FLOW_ACTION_PTYPE, */
-	NULL, /* FLOW_ACTION_PRIORITY, */
-	NULL, /* FLOW_ACTION_WAKE, */
-	NULL, /* FLOW_ACTION_QUEUE, */
-	NULL, /* FLOW_ACTION_SAMPLE, */
-	NULL, /* FLOW_ACTION_POLICE, */
-	&mlx5e_tc_act_ct,
+	[FLOW_ACTION_ACCEPT] = &mlx5e_tc_act_accept,
+	[FLOW_ACTION_DROP] = &mlx5e_tc_act_drop,
+	[FLOW_ACTION_GOTO] = &mlx5e_tc_act_goto,
+	[FLOW_ACTION_REDIRECT] = &mlx5e_tc_act_mirred_nic,
+	[FLOW_ACTION_MANGLE] = &mlx5e_tc_act_pedit,
+	[FLOW_ACTION_ADD] = &mlx5e_tc_act_pedit,
+	[FLOW_ACTION_CSUM] = &mlx5e_tc_act_csum,
+	[FLOW_ACTION_MARK] = &mlx5e_tc_act_mark,
+	[FLOW_ACTION_CT] = &mlx5e_tc_act_ct,
 };
 
 /**
-- 
2.38.1

[V3 net 08/10] net/mlx5e: TC, Fix wrong rejection of packet-per-second policing

[Saeed Mahameed]

From: Jianbo Liu <jianbol@nvidia.com>

In the bellow commit, we added support for PPS policing without
removing the check which block offload of such cases.
Fix it by removing this check.

Fixes: a8d52b024d6d ("net/mlx5e: TC, Support offloading police action")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index dd6fea9e9a5b..372dfb89e396 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -4758,12 +4758,6 @@ int mlx5e_policer_validate(const struct flow_action *action,
 		return -EOPNOTSUPP;
 	}
 
-	if (act->police.rate_pkt_ps) {
-		NL_SET_ERR_MSG_MOD(extack,
-				   "QoS offload not support packets per second");
-		return -EOPNOTSUPP;
-	}
-
 	return 0;
 }
 
-- 
2.38.1

[V3 net 09/10] net/mlx5e: E-Switch, Fix comparing termination table instance

[Saeed Mahameed]

From: Roi Dayan <roid@nvidia.com>

The pkt_reformat pointer being saved under flow_act and not
dest attribute in the termination table instance.
Fix the comparison pointers.

Also fix returning success if one pkt_reformat pointer is null
and the other is not.

Fixes: 249ccc3c95bd ("net/mlx5e: Add support for offloading traffic from uplink to uplink")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../mellanox/mlx5/core/eswitch_offloads_termtbl.c  | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
index ee568bf34ae2..108a3503f413 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_termtbl.c
@@ -30,9 +30,9 @@ mlx5_eswitch_termtbl_hash(struct mlx5_flow_act *flow_act,
 		     sizeof(dest->vport.num), hash);
 	hash = jhash((const void *)&dest->vport.vhca_id,
 		     sizeof(dest->vport.num), hash);
-	if (dest->vport.pkt_reformat)
-		hash = jhash(dest->vport.pkt_reformat,
-			     sizeof(*dest->vport.pkt_reformat),
+	if (flow_act->pkt_reformat)
+		hash = jhash(flow_act->pkt_reformat,
+			     sizeof(*flow_act->pkt_reformat),
 			     hash);
 	return hash;
 }
@@ -53,9 +53,11 @@ mlx5_eswitch_termtbl_cmp(struct mlx5_flow_act *flow_act1,
 	if (ret)
 		return ret;
 
-	return dest1->vport.pkt_reformat && dest2->vport.pkt_reformat ?
-	       memcmp(dest1->vport.pkt_reformat, dest2->vport.pkt_reformat,
-		      sizeof(*dest1->vport.pkt_reformat)) : 0;
+	if (flow_act1->pkt_reformat && flow_act2->pkt_reformat)
+		return memcmp(flow_act1->pkt_reformat, flow_act2->pkt_reformat,
+			      sizeof(*flow_act1->pkt_reformat));
+
+	return !(flow_act1->pkt_reformat == flow_act2->pkt_reformat);
 }
 
 static int
-- 
2.38.1

[V3 net 10/10] net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions

[Saeed Mahameed]

From: Roi Dayan <roid@nvidia.com>

esw_attr is only allocated if namespace is fdb.

BUG: KASAN: slab-out-of-bounds in parse_tc_actions+0xdc6/0x10e0 [mlx5_core]
Write of size 4 at addr ffff88815f185b04 by task tc/2135

CPU: 5 PID: 2135 Comm: tc Not tainted 6.1.0-rc2+ #2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x57/0x7d
 print_report+0x170/0x471
 ? parse_tc_actions+0xdc6/0x10e0 [mlx5_core]
 kasan_report+0xbc/0xf0
 ? parse_tc_actions+0xdc6/0x10e0 [mlx5_core]
 parse_tc_actions+0xdc6/0x10e0 [mlx5_core]

Fixes: 94d651739e17 ("net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 372dfb89e396..5a6aa61ec82a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -3633,10 +3633,14 @@ mlx5e_clone_flow_attr_for_post_act(struct mlx5_flow_attr *attr,
 	attr2->action = 0;
 	attr2->flags = 0;
 	attr2->parse_attr = parse_attr;
-	attr2->esw_attr->out_count = 0;
-	attr2->esw_attr->split_count = 0;
 	attr2->dest_chain = 0;
 	attr2->dest_ft = NULL;
+
+	if (ns_type == MLX5_FLOW_NAMESPACE_FDB) {
+		attr2->esw_attr->out_count = 0;
+		attr2->esw_attr->split_count = 0;
+	}
+
 	return attr2;
 }
 
-- 
2.38.1