[PATCH v7 0/2] virtio-blk: support zoned block devices

[PATCH v7 0/2] virtio-blk: support zoned block devices

[Dmitry Fomichev]

In its current form, the virtio protocol for block devices (virtio-blk)
is not aware of zoned block devices (ZBDs) but it allows the driver to
successfully scan a host-managed drive provided by the virtio block
device. As the result, the host-managed drive is recognized by the
virtio driver as a regular, non-zoned drive that will operate
erroneously under the most common write workloads. Host-aware ZBDs are
currently usable, but their performance may not be optimal because the
driver can only see them as non-zoned block devices.

To fix this, the virtio-blk protocol needs to be extended to add the
capabilities to convey the zone characteristics of ZBDs at the device
side to the driver and to provide support for ZBD-specific commands -
Report Zones, four zone operations (Open, Close, Finish and Reset) and
(optionally) Zone Append.

The required virtio-blk protocol extensions are currently under review
at OASIS Technical Committee and the specification patch is linked at

https://github.com/oasis-tcs/virtio-spec/issues/143 .

The QEMU zoned device code that implements these protocol extensions
has been developed by Sam Li, an intern, as a part of Outreachy
community mentorship initiative. The latest versions of the QEMU
patch series can be found here:

https://lists.gnu.org/archive/html/qemu-devel/2022-10/msg05195.html
https://lists.gnu.org/archive/html/qemu-devel/2022-10/msg05205.html
https://lists.gnu.org/archive/html/qemu-devel/2022-10/msg05896.html

This patch series modifies the virtio block driver code to implement
the above virtio specification extensions. This patch has been tested
to be compatible with the QEMU implementation referred above.

v6 -> v7:

 - address nits from Damien

 - add Review-by tag from Damien to the prep patch

v5 -> v6:

Address review comments from Damien and Stefan:

 - Correctly calculate the size of the runt zone (i.e. the last zone in
   the LBA range that is smaller than others) using the device capacity

 - In virtblk_parse_zone(), make the write pointer invalid for offline
   and read-only zones

 - In virtblk_parse_zone(), return -EIO if the zone type or condition
   is invalid instead of -EINVAL. In this case, the caller's command
   was valid, it is the output data that has the error, hence -EIO

 - Do minor editorial changes - make some comments more clear, rename a
   label, etc.

v4 -> v5:

Address review comments from Stefan:

 - Take vdev_mutex in virtblk_report_zones() to prevent a potential
   race with virtblk_remove()

 - Check the current zoned model in virtblk_revalidate_zones() and
   reset the request queue zoned model to NONE if the reported model
   is not VIRTIO_BLK_Z_HM

 - Add the comment in virtblk_parse_zone() explaining why sanity
   checks are not needed in that function

v3 -> v4:

 - Fix the units in max ZA / write granularity check
 - Remove unneeded dev_info message

v2 -> v3:

 - Change the request in-header layout to always make the status byte
   to be the last byte of the in-header. For all requests except Zone
   Append, the in-header consists only of the status byte. For Zone
   Append, an extended in-header is defined that consists of the zone
   append sector followed by the status byte

 - In zone report handler, validate the zone type/condition values
   that are received from the device and convert them from the values
   defined in the virtio_blk ZBD spec extension to the values defined
   in the block layer

 - During ZBD scan, check that max_append_sectors is not smaller than
   the write granularity

 - Fix sparse warnings

v1 -> v2:

 - Rebase to the current head of development. The second patch in the
   previous version is no longer needed as the secure erase support has
   now been added to virtio_blk driver

 - Fix a couple of bugs in zone report code

 - Clean up ZBD probe code

This version DOESN'T include the additional request layout changes that
are being discussed at the OASIS TC. An updated patch series will be
posted to the list when those changes are finalized.

Dmitry Fomichev (2):
  virtio-blk: use a helper to handle request queuing errors
  virtio-blk: add support for zoned block devices

 drivers/block/virtio_blk.c      | 486 +++++++++++++++++++++++++++++---
 include/uapi/linux/virtio_blk.h | 105 +++++++
 2 files changed, 559 insertions(+), 32 deletions(-)

-- 
2.34.1

[virtio-dev] [PATCH v7 0/2] virtio-blk: support zoned block devices

[Dmitry Fomichev]

In its current form, the virtio protocol for block devices (virtio-blk)
is not aware of zoned block devices (ZBDs) but it allows the driver to
successfully scan a host-managed drive provided by the virtio block
device. As the result, the host-managed drive is recognized by the
virtio driver as a regular, non-zoned drive that will operate
erroneously under the most common write workloads. Host-aware ZBDs are
currently usable, but their performance may not be optimal because the
driver can only see them as non-zoned block devices.

To fix this, the virtio-blk protocol needs to be extended to add the
capabilities to convey the zone characteristics of ZBDs at the device
side to the driver and to provide support for ZBD-specific commands -
Report Zones, four zone operations (Open, Close, Finish and Reset) and
(optionally) Zone Append.

The required virtio-blk protocol extensions are currently under review
at OASIS Technical Committee and the specification patch is linked at

https://github.com/oasis-tcs/virtio-spec/issues/143 .

The QEMU zoned device code that implements these protocol extensions
has been developed by Sam Li, an intern, as a part of Outreachy
community mentorship initiative. The latest versions of the QEMU
patch series can be found here:

https://lists.gnu.org/archive/html/qemu-devel/2022-10/msg05195.html
https://lists.gnu.org/archive/html/qemu-devel/2022-10/msg05205.html
https://lists.gnu.org/archive/html/qemu-devel/2022-10/msg05896.html

This patch series modifies the virtio block driver code to implement
the above virtio specification extensions. This patch has been tested
to be compatible with the QEMU implementation referred above.

v6 -> v7:

 - address nits from Damien

 - add Review-by tag from Damien to the prep patch

v5 -> v6:

Address review comments from Damien and Stefan:

 - Correctly calculate the size of the runt zone (i.e. the last zone in
   the LBA range that is smaller than others) using the device capacity

 - In virtblk_parse_zone(), make the write pointer invalid for offline
   and read-only zones

 - In virtblk_parse_zone(), return -EIO if the zone type or condition
   is invalid instead of -EINVAL. In this case, the caller's command
   was valid, it is the output data that has the error, hence -EIO

 - Do minor editorial changes - make some comments more clear, rename a
   label, etc.

v4 -> v5:

Address review comments from Stefan:

 - Take vdev_mutex in virtblk_report_zones() to prevent a potential
   race with virtblk_remove()

 - Check the current zoned model in virtblk_revalidate_zones() and
   reset the request queue zoned model to NONE if the reported model
   is not VIRTIO_BLK_Z_HM

 - Add the comment in virtblk_parse_zone() explaining why sanity
   checks are not needed in that function

v3 -> v4:

 - Fix the units in max ZA / write granularity check
 - Remove unneeded dev_info message

v2 -> v3:

 - Change the request in-header layout to always make the status byte
   to be the last byte of the in-header. For all requests except Zone
   Append, the in-header consists only of the status byte. For Zone
   Append, an extended in-header is defined that consists of the zone
   append sector followed by the status byte

 - In zone report handler, validate the zone type/condition values
   that are received from the device and convert them from the values
   defined in the virtio_blk ZBD spec extension to the values defined
   in the block layer

 - During ZBD scan, check that max_append_sectors is not smaller than
   the write granularity

 - Fix sparse warnings

v1 -> v2:

 - Rebase to the current head of development. The second patch in the
   previous version is no longer needed as the secure erase support has
   now been added to virtio_blk driver

 - Fix a couple of bugs in zone report code

 - Clean up ZBD probe code

This version DOESN'T include the additional request layout changes that
are being discussed at the OASIS TC. An updated patch series will be
posted to the list when those changes are finalized.

Dmitry Fomichev (2):
  virtio-blk: use a helper to handle request queuing errors
  virtio-blk: add support for zoned block devices

 drivers/block/virtio_blk.c      | 486 +++++++++++++++++++++++++++++---
 include/uapi/linux/virtio_blk.h | 105 +++++++
 2 files changed, 559 insertions(+), 32 deletions(-)

-- 
2.34.1


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[PATCH v7 1/2] virtio-blk: use a helper to handle request queuing errors

[Dmitry Fomichev]

Define a new helper function, virtblk_fail_to_queue(), to
clean up the error handling code in virtio_queue_rq().

Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
---
 drivers/block/virtio_blk.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 19da5defd734..3efe3da5f8c2 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -315,6 +315,19 @@ static void virtio_commit_rqs(struct blk_mq_hw_ctx *hctx)
 		virtqueue_notify(vq->vq);
 }
 
+static blk_status_t virtblk_fail_to_queue(struct request *req, int rc)
+{
+	virtblk_cleanup_cmd(req);
+	switch (rc) {
+	case -ENOSPC:
+		return BLK_STS_DEV_RESOURCE;
+	case -ENOMEM:
+		return BLK_STS_RESOURCE;
+	default:
+		return BLK_STS_IOERR;
+	}
+}
+
 static blk_status_t virtblk_prep_rq(struct blk_mq_hw_ctx *hctx,
 					struct virtio_blk *vblk,
 					struct request *req,
@@ -327,10 +340,8 @@ static blk_status_t virtblk_prep_rq(struct blk_mq_hw_ctx *hctx,
 		return status;
 
 	vbr->sg_table.nents = virtblk_map_data(hctx, req, vbr);
-	if (unlikely(vbr->sg_table.nents < 0)) {
-		virtblk_cleanup_cmd(req);
-		return BLK_STS_RESOURCE;
-	}
+	if (unlikely(vbr->sg_table.nents < 0))
+		return virtblk_fail_to_queue(req, -ENOMEM);
 
 	blk_mq_start_request(req);
 
@@ -364,15 +375,7 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
 			blk_mq_stop_hw_queue(hctx);
 		spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags);
 		virtblk_unmap_data(req, vbr);
-		virtblk_cleanup_cmd(req);
-		switch (err) {
-		case -ENOSPC:
-			return BLK_STS_DEV_RESOURCE;
-		case -ENOMEM:
-			return BLK_STS_RESOURCE;
-		default:
-			return BLK_STS_IOERR;
-		}
+		return virtblk_fail_to_queue(req, err);
 	}
 
 	if (bd->last && virtqueue_kick_prepare(vblk->vqs[qid].vq))
-- 
2.34.1

[virtio-dev] [PATCH v7 1/2] virtio-blk: use a helper to handle request queuing errors

[Dmitry Fomichev]

Define a new helper function, virtblk_fail_to_queue(), to
clean up the error handling code in virtio_queue_rq().

Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
---
 drivers/block/virtio_blk.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 19da5defd734..3efe3da5f8c2 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -315,6 +315,19 @@ static void virtio_commit_rqs(struct blk_mq_hw_ctx *hctx)
 		virtqueue_notify(vq->vq);
 }
 
+static blk_status_t virtblk_fail_to_queue(struct request *req, int rc)
+{
+	virtblk_cleanup_cmd(req);
+	switch (rc) {
+	case -ENOSPC:
+		return BLK_STS_DEV_RESOURCE;
+	case -ENOMEM:
+		return BLK_STS_RESOURCE;
+	default:
+		return BLK_STS_IOERR;
+	}
+}
+
 static blk_status_t virtblk_prep_rq(struct blk_mq_hw_ctx *hctx,
 					struct virtio_blk *vblk,
 					struct request *req,
@@ -327,10 +340,8 @@ static blk_status_t virtblk_prep_rq(struct blk_mq_hw_ctx *hctx,
 		return status;
 
 	vbr->sg_table.nents = virtblk_map_data(hctx, req, vbr);
-	if (unlikely(vbr->sg_table.nents < 0)) {
-		virtblk_cleanup_cmd(req);
-		return BLK_STS_RESOURCE;
-	}
+	if (unlikely(vbr->sg_table.nents < 0))
+		return virtblk_fail_to_queue(req, -ENOMEM);
 
 	blk_mq_start_request(req);
 
@@ -364,15 +375,7 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
 			blk_mq_stop_hw_queue(hctx);
 		spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags);
 		virtblk_unmap_data(req, vbr);
-		virtblk_cleanup_cmd(req);
-		switch (err) {
-		case -ENOSPC:
-			return BLK_STS_DEV_RESOURCE;
-		case -ENOMEM:
-			return BLK_STS_RESOURCE;
-		default:
-			return BLK_STS_IOERR;
-		}
+		return virtblk_fail_to_queue(req, err);
 	}
 
 	if (bd->last && virtqueue_kick_prepare(vblk->vqs[qid].vq))
-- 
2.34.1


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[PATCH v7 2/2] virtio-blk: add support for zoned block devices

[Dmitry Fomichev]

This patch adds support for Zoned Block Devices (ZBDs) to the kernel
virtio-blk driver.

The patch accompanies the virtio-blk ZBD support draft that is now
being proposed for standardization. The latest version of the draft is
linked at

https://github.com/oasis-tcs/virtio-spec/issues/143 .

The QEMU zoned device code that implements these protocol extensions
has been developed by Sam Li and it is currently in review at the QEMU
mailing list.

A number of virtblk request structure changes has been introduced to
accommodate the functionality that is specific to zoned block devices
and, most importantly, make room for carrying the Zoned Append sector
value from the device back to the driver along with the request status.

The zone-specific code in the patch is heavily influenced by NVMe ZNS
code in drivers/nvme/host/zns.c, but it is simpler because the proposed
virtio ZBD draft only covers the zoned device features that are
relevant to the zoned functionality provided by Linux block layer.

Co-developed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
---
 drivers/block/virtio_blk.c      | 457 ++++++++++++++++++++++++++++++--
 include/uapi/linux/virtio_blk.h | 105 ++++++++
 2 files changed, 543 insertions(+), 19 deletions(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 3efe3da5f8c2..310cd89c4bad 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -15,6 +15,7 @@
 #include <linux/blk-mq.h>
 #include <linux/blk-mq-virtio.h>
 #include <linux/numa.h>
+#include <linux/vmalloc.h>
 #include <uapi/linux/virtio_ring.h>
 
 #define PART_BITS 4
@@ -80,22 +81,51 @@ struct virtio_blk {
 	int num_vqs;
 	int io_queues[HCTX_MAX_TYPES];
 	struct virtio_blk_vq *vqs;
+
+	/* For zoned device */
+	unsigned int zone_sectors;
 };
 
 struct virtblk_req {
+	/* Out header */
 	struct virtio_blk_outhdr out_hdr;
-	u8 status;
+
+	/* In header */
+	union {
+		struct {
+			u8 status;
+		} common;
+
+		/*
+		 * The zone append command has an extended in header.
+		 * The status field in zone_append_in_hdr must always
+		 * be the last byte.
+		 */
+		struct {
+			__virtio64 sector;
+			u8 status;
+		} zone_append;
+	} in_hdr;
+
+	size_t in_hdr_len;
+
 	struct sg_table sg_table;
 	struct scatterlist sg[];
 };
 
-static inline blk_status_t virtblk_result(struct virtblk_req *vbr)
+static inline blk_status_t virtblk_result(u8 status)
 {
-	switch (vbr->status) {
+	switch (status) {
 	case VIRTIO_BLK_S_OK:
 		return BLK_STS_OK;
 	case VIRTIO_BLK_S_UNSUPP:
 		return BLK_STS_NOTSUPP;
+	case VIRTIO_BLK_S_ZONE_OPEN_RESOURCE:
+		return BLK_STS_ZONE_OPEN_RESOURCE;
+	case VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE:
+		return BLK_STS_ZONE_ACTIVE_RESOURCE;
+	case VIRTIO_BLK_S_IOERR:
+	case VIRTIO_BLK_S_ZONE_UNALIGNED_WP:
 	default:
 		return BLK_STS_IOERR;
 	}
@@ -111,11 +141,11 @@ static inline struct virtio_blk_vq *get_virtio_blk_vq(struct blk_mq_hw_ctx *hctx
 
 static int virtblk_add_req(struct virtqueue *vq, struct virtblk_req *vbr)
 {
-	struct scatterlist hdr, status, *sgs[3];
+	struct scatterlist out_hdr, in_hdr, *sgs[3];
 	unsigned int num_out = 0, num_in = 0;
 
-	sg_init_one(&hdr, &vbr->out_hdr, sizeof(vbr->out_hdr));
-	sgs[num_out++] = &hdr;
+	sg_init_one(&out_hdr, &vbr->out_hdr, sizeof(vbr->out_hdr));
+	sgs[num_out++] = &out_hdr;
 
 	if (vbr->sg_table.nents) {
 		if (vbr->out_hdr.type & cpu_to_virtio32(vq->vdev, VIRTIO_BLK_T_OUT))
@@ -124,8 +154,8 @@ static int virtblk_add_req(struct virtqueue *vq, struct virtblk_req *vbr)
 			sgs[num_out + num_in++] = vbr->sg_table.sgl;
 	}
 
-	sg_init_one(&status, &vbr->status, sizeof(vbr->status));
-	sgs[num_out + num_in++] = &status;
+	sg_init_one(&in_hdr, &vbr->in_hdr.common.status, vbr->in_hdr_len);
+	sgs[num_out + num_in++] = &in_hdr;
 
 	return virtqueue_add_sgs(vq, sgs, num_out, num_in, vbr, GFP_ATOMIC);
 }
@@ -214,21 +244,26 @@ static blk_status_t virtblk_setup_cmd(struct virtio_device *vdev,
 				      struct request *req,
 				      struct virtblk_req *vbr)
 {
+	size_t in_hdr_len = sizeof(vbr->in_hdr.common.status);
 	bool unmap = false;
 	u32 type;
+	u64 sector = 0;
 
-	vbr->out_hdr.sector = 0;
+	if (!IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
+		op_is_zone_mgmt(req_op(req)))
+		return BLK_STS_NOTSUPP;
+
+	/* Set fields for all request types */
+	vbr->out_hdr.ioprio = cpu_to_virtio32(vdev, req_get_ioprio(req));
 
 	switch (req_op(req)) {
 	case REQ_OP_READ:
 		type = VIRTIO_BLK_T_IN;
-		vbr->out_hdr.sector = cpu_to_virtio64(vdev,
-						      blk_rq_pos(req));
+		sector = blk_rq_pos(req);
 		break;
 	case REQ_OP_WRITE:
 		type = VIRTIO_BLK_T_OUT;
-		vbr->out_hdr.sector = cpu_to_virtio64(vdev,
-						      blk_rq_pos(req));
+		sector = blk_rq_pos(req);
 		break;
 	case REQ_OP_FLUSH:
 		type = VIRTIO_BLK_T_FLUSH;
@@ -243,16 +278,45 @@ static blk_status_t virtblk_setup_cmd(struct virtio_device *vdev,
 	case REQ_OP_SECURE_ERASE:
 		type = VIRTIO_BLK_T_SECURE_ERASE;
 		break;
-	case REQ_OP_DRV_IN:
-		type = VIRTIO_BLK_T_GET_ID;
+	case REQ_OP_ZONE_OPEN:
+		type = VIRTIO_BLK_T_ZONE_OPEN;
+		sector = blk_rq_pos(req);
 		break;
+	case REQ_OP_ZONE_CLOSE:
+		type = VIRTIO_BLK_T_ZONE_CLOSE;
+		sector = blk_rq_pos(req);
+		break;
+	case REQ_OP_ZONE_FINISH:
+		type = VIRTIO_BLK_T_ZONE_FINISH;
+		sector = blk_rq_pos(req);
+		break;
+	case REQ_OP_ZONE_APPEND:
+		type = VIRTIO_BLK_T_ZONE_APPEND;
+		sector = blk_rq_pos(req);
+		in_hdr_len = sizeof(vbr->in_hdr.zone_append);
+		break;
+	case REQ_OP_ZONE_RESET:
+		type = VIRTIO_BLK_T_ZONE_RESET;
+		sector = blk_rq_pos(req);
+		break;
+	case REQ_OP_ZONE_RESET_ALL:
+		type = VIRTIO_BLK_T_ZONE_RESET_ALL;
+		break;
+	case REQ_OP_DRV_IN:
+		/*
+		 * Out header has already been prepared by the caller (virtblk_get_id()
+		 * or virtblk_submit_zone_report()), nothing to do here.
+		 */
+		return 0;
 	default:
 		WARN_ON_ONCE(1);
 		return BLK_STS_IOERR;
 	}
 
+	/* Set fields for non-REQ_OP_DRV_IN request types */
+	vbr->in_hdr_len = in_hdr_len;
 	vbr->out_hdr.type = cpu_to_virtio32(vdev, type);
-	vbr->out_hdr.ioprio = cpu_to_virtio32(vdev, req_get_ioprio(req));
+	vbr->out_hdr.sector = cpu_to_virtio64(vdev, sector);
 
 	if (type == VIRTIO_BLK_T_DISCARD || type == VIRTIO_BLK_T_WRITE_ZEROES ||
 	    type == VIRTIO_BLK_T_SECURE_ERASE) {
@@ -263,13 +327,30 @@ static blk_status_t virtblk_setup_cmd(struct virtio_device *vdev,
 	return 0;
 }
 
+/*
+ * The status byte is always the last byte of the virtblk request
+ * in-header. This helper fetches its value for all in-header formats
+ * that are currently defined.
+ */
+static inline u8 virtblk_vbr_status(struct virtblk_req *vbr)
+{
+	return *((u8 *)&vbr->in_hdr + vbr->in_hdr_len - 1);
+}
+
 static inline void virtblk_request_done(struct request *req)
 {
 	struct virtblk_req *vbr = blk_mq_rq_to_pdu(req);
+	blk_status_t status = virtblk_result(virtblk_vbr_status(vbr));
+	struct virtio_blk *vblk = req->mq_hctx->queue->queuedata;
 
 	virtblk_unmap_data(req, vbr);
 	virtblk_cleanup_cmd(req);
-	blk_mq_end_request(req, virtblk_result(vbr));
+
+	if (req_op(req) == REQ_OP_ZONE_APPEND)
+		req->__sector = virtio64_to_cpu(vblk->vdev,
+						vbr->in_hdr.zone_append.sector);
+
+	blk_mq_end_request(req, status);
 }
 
 static void virtblk_done(struct virtqueue *vq)
@@ -455,6 +536,327 @@ static void virtio_queue_rqs(struct request **rqlist)
 	*rqlist = requeue_list;
 }
 
+#ifdef CONFIG_BLK_DEV_ZONED
+static void *virtblk_alloc_report_buffer(struct virtio_blk *vblk,
+					  unsigned int nr_zones,
+					  size_t *buflen)
+{
+	struct request_queue *q = vblk->disk->queue;
+	size_t bufsize;
+	void *buf;
+
+	nr_zones = min_t(unsigned int, nr_zones,
+			 get_capacity(vblk->disk) >> ilog2(vblk->zone_sectors));
+
+	bufsize = sizeof(struct virtio_blk_zone_report) +
+		nr_zones * sizeof(struct virtio_blk_zone_descriptor);
+	bufsize = min_t(size_t, bufsize,
+			queue_max_hw_sectors(q) << SECTOR_SHIFT);
+	bufsize = min_t(size_t, bufsize, queue_max_segments(q) << PAGE_SHIFT);
+
+	while (bufsize >= sizeof(struct virtio_blk_zone_report)) {
+		buf = __vmalloc(bufsize, GFP_KERNEL | __GFP_NORETRY);
+		if (buf) {
+			*buflen = bufsize;
+			return buf;
+		}
+		bufsize >>= 1;
+	}
+
+	return NULL;
+}
+
+static int virtblk_submit_zone_report(struct virtio_blk *vblk,
+				       char *report_buf, size_t report_len,
+				       sector_t sector)
+{
+	struct request_queue *q = vblk->disk->queue;
+	struct request *req;
+	struct virtblk_req *vbr;
+	int err;
+
+	req = blk_mq_alloc_request(q, REQ_OP_DRV_IN, 0);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	vbr = blk_mq_rq_to_pdu(req);
+	vbr->in_hdr_len = sizeof(vbr->in_hdr.common.status);
+	vbr->out_hdr.type = cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_ZONE_REPORT);
+	vbr->out_hdr.sector = cpu_to_virtio64(vblk->vdev, sector);
+
+	err = blk_rq_map_kern(q, req, report_buf, report_len, GFP_KERNEL);
+	if (err)
+		goto out;
+
+	blk_execute_rq(req, false);
+	err = blk_status_to_errno(virtblk_result(vbr->in_hdr.common.status));
+out:
+	blk_mq_free_request(req);
+	return err;
+}
+
+static int virtblk_parse_zone(struct virtio_blk *vblk,
+			       struct virtio_blk_zone_descriptor *entry,
+			       unsigned int idx, report_zones_cb cb, void *data)
+{
+	struct blk_zone zone = { };
+
+	zone.start = virtio64_to_cpu(vblk->vdev, entry->z_start);
+	if (zone.start + vblk->zone_sectors <= get_capacity(vblk->disk))
+		zone.len = vblk->zone_sectors;
+	else
+		zone.len = get_capacity(vblk->disk) - zone.start;
+	zone.capacity = virtio64_to_cpu(vblk->vdev, entry->z_cap);
+	zone.wp = virtio64_to_cpu(vblk->vdev, entry->z_wp);
+
+	switch (entry->z_type) {
+	case VIRTIO_BLK_ZT_SWR:
+		zone.type = BLK_ZONE_TYPE_SEQWRITE_REQ;
+		break;
+	case VIRTIO_BLK_ZT_SWP:
+		zone.type = BLK_ZONE_TYPE_SEQWRITE_PREF;
+		break;
+	case VIRTIO_BLK_ZT_CONV:
+		zone.type = BLK_ZONE_TYPE_CONVENTIONAL;
+		break;
+	default:
+		dev_err(&vblk->vdev->dev, "zone %llu: invalid type %#x\n",
+			zone.start, entry->z_type);
+		return -EIO;
+	}
+
+	switch (entry->z_state) {
+	case VIRTIO_BLK_ZS_EMPTY:
+		zone.cond = BLK_ZONE_COND_EMPTY;
+		break;
+	case VIRTIO_BLK_ZS_CLOSED:
+		zone.cond = BLK_ZONE_COND_CLOSED;
+		break;
+	case VIRTIO_BLK_ZS_FULL:
+		zone.cond = BLK_ZONE_COND_FULL;
+		zone.wp = zone.start + zone.len;
+		break;
+	case VIRTIO_BLK_ZS_EOPEN:
+		zone.cond = BLK_ZONE_COND_EXP_OPEN;
+		break;
+	case VIRTIO_BLK_ZS_IOPEN:
+		zone.cond = BLK_ZONE_COND_IMP_OPEN;
+		break;
+	case VIRTIO_BLK_ZS_NOT_WP:
+		zone.cond = BLK_ZONE_COND_NOT_WP;
+		break;
+	case VIRTIO_BLK_ZS_RDONLY:
+		zone.cond = BLK_ZONE_COND_READONLY;
+		zone.wp = ULONG_MAX;
+		break;
+	case VIRTIO_BLK_ZS_OFFLINE:
+		zone.cond = BLK_ZONE_COND_OFFLINE;
+		zone.wp = ULONG_MAX;
+		break;
+	default:
+		dev_err(&vblk->vdev->dev, "zone %llu: invalid condition %#x\n",
+			zone.start, entry->z_state);
+		return -EIO;
+	}
+
+	/*
+	 * The callback below checks the validity of the reported
+	 * entry data, no need to further validate it here.
+	 */
+	return cb(&zone, idx, data);
+}
+
+static int virtblk_report_zones(struct gendisk *disk, sector_t sector,
+				 unsigned int nr_zones, report_zones_cb cb,
+				 void *data)
+{
+	struct virtio_blk *vblk = disk->private_data;
+	struct virtio_blk_zone_report *report;
+	unsigned long long nz, i;
+	size_t buflen;
+	unsigned int zone_idx = 0;
+	int ret;
+
+	if (WARN_ON_ONCE(!vblk->zone_sectors))
+		return -EOPNOTSUPP;
+
+	report = virtblk_alloc_report_buffer(vblk, nr_zones, &buflen);
+	if (!report)
+		return -ENOMEM;
+
+	mutex_lock(&vblk->vdev_mutex);
+
+	if (!vblk->vdev) {
+		ret = -ENXIO;
+		goto fail_report;
+	}
+
+	while (zone_idx < nr_zones && sector < get_capacity(vblk->disk)) {
+		memset(report, 0, buflen);
+
+		ret = virtblk_submit_zone_report(vblk, (char *)report,
+						 buflen, sector);
+		if (ret)
+			goto fail_report;
+
+		nz = min_t(u64, virtio64_to_cpu(vblk->vdev, report->nr_zones),
+			   nr_zones);
+		if (!nz)
+			break;
+
+		for (i = 0; i < nz && zone_idx < nr_zones; i++) {
+			ret = virtblk_parse_zone(vblk, &report->zones[i],
+						 zone_idx, cb, data);
+			if (ret)
+				goto fail_report;
+
+			sector = virtio64_to_cpu(vblk->vdev,
+						 report->zones[i].z_start) +
+				 vblk->zone_sectors;
+			zone_idx++;
+		}
+	}
+
+	if (zone_idx > 0)
+		ret = zone_idx;
+	else
+		ret = -EINVAL;
+fail_report:
+	mutex_unlock(&vblk->vdev_mutex);
+	kvfree(report);
+	return ret;
+}
+
+static void virtblk_revalidate_zones(struct virtio_blk *vblk)
+{
+	u8 model;
+
+	virtio_cread(vblk->vdev, struct virtio_blk_config,
+		     zoned.model, &model);
+	switch (model) {
+	default:
+		dev_err(&vblk->vdev->dev, "unknown zone model %d\n", model);
+		fallthrough;
+	case VIRTIO_BLK_Z_NONE:
+	case VIRTIO_BLK_Z_HA:
+		disk_set_zoned(vblk->disk, BLK_ZONED_NONE);
+		return;
+	case VIRTIO_BLK_Z_HM:
+		WARN_ON_ONCE(!vblk->zone_sectors);
+		if (!blk_revalidate_disk_zones(vblk->disk, NULL))
+			set_capacity_and_notify(vblk->disk, 0);
+	}
+}
+
+static int virtblk_probe_zoned_device(struct virtio_device *vdev,
+				       struct virtio_blk *vblk,
+				       struct request_queue *q)
+{
+	u32 v, wg;
+	u8 model;
+	int ret;
+
+	virtio_cread(vdev, struct virtio_blk_config,
+		     zoned.model, &model);
+
+	switch (model) {
+	case VIRTIO_BLK_Z_NONE:
+	case VIRTIO_BLK_Z_HA:
+		/* Present the host-aware device as non-zoned */
+		return 0;
+	case VIRTIO_BLK_Z_HM:
+		break;
+	default:
+		dev_err(&vdev->dev, "unsupported zone model %d\n", model);
+		return -EINVAL;
+	}
+
+	dev_dbg(&vdev->dev, "probing host-managed zoned device\n");
+
+	disk_set_zoned(vblk->disk, BLK_ZONED_HM);
+	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
+
+	virtio_cread(vdev, struct virtio_blk_config,
+		     zoned.max_open_zones, &v);
+	disk_set_max_open_zones(vblk->disk, v);
+
+	dev_dbg(&vdev->dev, "max open zones = %u\n", v);
+
+	virtio_cread(vdev, struct virtio_blk_config,
+		     zoned.max_active_zones, &v);
+	disk_set_max_active_zones(vblk->disk, v);
+	dev_dbg(&vdev->dev, "max active zones = %u\n", v);
+
+	virtio_cread(vdev, struct virtio_blk_config,
+		     zoned.write_granularity, &wg);
+	if (!wg) {
+		dev_warn(&vdev->dev, "zero write granularity reported\n");
+		return -ENODEV;
+	}
+	blk_queue_physical_block_size(q, wg);
+	blk_queue_io_min(q, wg);
+
+	dev_dbg(&vdev->dev, "write granularity = %u\n", wg);
+
+	/*
+	 * virtio ZBD specification doesn't require zones to be a power of
+	 * two sectors in size, but the code in this driver expects that.
+	 */
+	virtio_cread(vdev, struct virtio_blk_config, zoned.zone_sectors,
+		     &vblk->zone_sectors);
+	if (vblk->zone_sectors == 0 || !is_power_of_2(vblk->zone_sectors)) {
+		dev_err(&vdev->dev,
+			"zoned device with non power of two zone size %u\n",
+			vblk->zone_sectors);
+		return -ENODEV;
+	}
+	dev_dbg(&vdev->dev, "zone sectors = %u\n", vblk->zone_sectors);
+
+	if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD)) {
+		dev_warn(&vblk->vdev->dev,
+			 "ignoring negotiated F_DISCARD for zoned device\n");
+		blk_queue_max_discard_sectors(q, 0);
+	}
+
+	ret = blk_revalidate_disk_zones(vblk->disk, NULL);
+	if (!ret) {
+		virtio_cread(vdev, struct virtio_blk_config,
+			     zoned.max_append_sectors, &v);
+		if (!v) {
+			dev_warn(&vdev->dev, "zero max_append_sectors reported\n");
+			return -ENODEV;
+		}
+		if ((v << SECTOR_SHIFT) < wg) {
+			dev_err(&vdev->dev,
+				"write granularity %u exceeds max_append_sectors %u limit\n",
+				wg, v);
+			return -ENODEV;
+		}
+
+		blk_queue_max_zone_append_sectors(q, v);
+		dev_dbg(&vdev->dev, "max append sectors = %u\n", v);
+	}
+
+	return ret;
+}
+
+#else
+
+/*
+ * Zoned block device support is not configured in this kernel.
+ * We only need to define a few symbols to avoid compilation errors.
+ */
+#define virtblk_report_zones       NULL
+static inline void virtblk_revalidate_zones(struct virtio_blk *vblk)
+{
+}
+static inline int virtblk_probe_zoned_device(struct virtio_device *vdev,
+			struct virtio_blk *vblk, struct request_queue *q)
+{
+	return -EOPNOTSUPP;
+}
+#endif /* CONFIG_BLK_DEV_ZONED */
+
 /* return id (s/n) string for *disk to *id_str
  */
 static int virtblk_get_id(struct gendisk *disk, char *id_str)
@@ -462,18 +864,24 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str)
 	struct virtio_blk *vblk = disk->private_data;
 	struct request_queue *q = vblk->disk->queue;
 	struct request *req;
+	struct virtblk_req *vbr;
 	int err;
 
 	req = blk_mq_alloc_request(q, REQ_OP_DRV_IN, 0);
 	if (IS_ERR(req))
 		return PTR_ERR(req);
 
+	vbr = blk_mq_rq_to_pdu(req);
+	vbr->in_hdr_len = sizeof(vbr->in_hdr.common.status);
+	vbr->out_hdr.type = cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_GET_ID);
+	vbr->out_hdr.sector = 0;
+
 	err = blk_rq_map_kern(q, req, id_str, VIRTIO_BLK_ID_BYTES, GFP_KERNEL);
 	if (err)
 		goto out;
 
 	blk_execute_rq(req, false);
-	err = blk_status_to_errno(virtblk_result(blk_mq_rq_to_pdu(req)));
+	err = blk_status_to_errno(virtblk_result(vbr->in_hdr.common.status));
 out:
 	blk_mq_free_request(req);
 	return err;
@@ -524,6 +932,7 @@ static const struct block_device_operations virtblk_fops = {
 	.owner  	= THIS_MODULE,
 	.getgeo		= virtblk_getgeo,
 	.free_disk	= virtblk_free_disk,
+	.report_zones	= virtblk_report_zones,
 };
 
 static int index_to_minor(int index)
@@ -594,6 +1003,7 @@ static void virtblk_config_changed_work(struct work_struct *work)
 	struct virtio_blk *vblk =
 		container_of(work, struct virtio_blk, config_work);
 
+	virtblk_revalidate_zones(vblk);
 	virtblk_update_capacity(vblk, true);
 }
 
@@ -861,7 +1271,7 @@ static int virtblk_poll(struct blk_mq_hw_ctx *hctx, struct io_comp_batch *iob)
 		struct request *req = blk_mq_rq_from_pdu(vbr);
 
 		found++;
-		if (!blk_mq_add_to_batch(req, iob, vbr->status,
+		if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr),
 						virtblk_complete_batch))
 			blk_mq_complete_request(req);
 	}
@@ -1150,6 +1560,12 @@ static int virtblk_probe(struct virtio_device *vdev)
 	virtblk_update_capacity(vblk, false);
 	virtio_device_ready(vdev);
 
+	if (virtio_has_feature(vdev, VIRTIO_BLK_F_ZONED)) {
+		err = virtblk_probe_zoned_device(vdev, vblk, q);
+		if (err)
+			goto out_cleanup_disk;
+	}
+
 	err = device_add_disk(&vdev->dev, vblk->disk, virtblk_attr_groups);
 	if (err)
 		goto out_cleanup_disk;
@@ -1251,6 +1667,9 @@ static unsigned int features[] = {
 	VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY, VIRTIO_BLK_F_CONFIG_WCE,
 	VIRTIO_BLK_F_MQ, VIRTIO_BLK_F_DISCARD, VIRTIO_BLK_F_WRITE_ZEROES,
 	VIRTIO_BLK_F_SECURE_ERASE,
+#ifdef CONFIG_BLK_DEV_ZONED
+	VIRTIO_BLK_F_ZONED,
+#endif /* CONFIG_BLK_DEV_ZONED */
 };
 
 static struct virtio_driver virtio_blk = {
diff --git a/include/uapi/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h
index 58e70b24b504..3744e4da1b2a 100644
--- a/include/uapi/linux/virtio_blk.h
+++ b/include/uapi/linux/virtio_blk.h
@@ -41,6 +41,7 @@
 #define VIRTIO_BLK_F_DISCARD	13	/* DISCARD is supported */
 #define VIRTIO_BLK_F_WRITE_ZEROES	14	/* WRITE ZEROES is supported */
 #define VIRTIO_BLK_F_SECURE_ERASE	16 /* Secure Erase is supported */
+#define VIRTIO_BLK_F_ZONED		17	/* Zoned block device */
 
 /* Legacy feature bits */
 #ifndef VIRTIO_BLK_NO_LEGACY
@@ -137,6 +138,16 @@ struct virtio_blk_config {
 	/* Secure erase commands must be aligned to this number of sectors. */
 	__virtio32 secure_erase_sector_alignment;
 
+	/* Zoned block device characteristics (if VIRTIO_BLK_F_ZONED) */
+	struct virtio_blk_zoned_characteristics {
+		__virtio32 zone_sectors;
+		__virtio32 max_open_zones;
+		__virtio32 max_active_zones;
+		__virtio32 max_append_sectors;
+		__virtio32 write_granularity;
+		__u8 model;
+		__u8 unused2[3];
+	} zoned;
 } __attribute__((packed));
 
 /*
@@ -174,6 +185,27 @@ struct virtio_blk_config {
 /* Secure erase command */
 #define VIRTIO_BLK_T_SECURE_ERASE	14
 
+/* Zone append command */
+#define VIRTIO_BLK_T_ZONE_APPEND    15
+
+/* Report zones command */
+#define VIRTIO_BLK_T_ZONE_REPORT    16
+
+/* Open zone command */
+#define VIRTIO_BLK_T_ZONE_OPEN      18
+
+/* Close zone command */
+#define VIRTIO_BLK_T_ZONE_CLOSE     20
+
+/* Finish zone command */
+#define VIRTIO_BLK_T_ZONE_FINISH    22
+
+/* Reset zone command */
+#define VIRTIO_BLK_T_ZONE_RESET     24
+
+/* Reset All zones command */
+#define VIRTIO_BLK_T_ZONE_RESET_ALL 26
+
 #ifndef VIRTIO_BLK_NO_LEGACY
 /* Barrier before this op. */
 #define VIRTIO_BLK_T_BARRIER	0x80000000
@@ -193,6 +225,72 @@ struct virtio_blk_outhdr {
 	__virtio64 sector;
 };
 
+/*
+ * Supported zoned device models.
+ */
+
+/* Regular block device */
+#define VIRTIO_BLK_Z_NONE      0
+/* Host-managed zoned device */
+#define VIRTIO_BLK_Z_HM        1
+/* Host-aware zoned device */
+#define VIRTIO_BLK_Z_HA        2
+
+/*
+ * Zone descriptor. A part of VIRTIO_BLK_T_ZONE_REPORT command reply.
+ */
+struct virtio_blk_zone_descriptor {
+	/* Zone capacity */
+	__virtio64 z_cap;
+	/* The starting sector of the zone */
+	__virtio64 z_start;
+	/* Zone write pointer position in sectors */
+	__virtio64 z_wp;
+	/* Zone type */
+	__u8 z_type;
+	/* Zone state */
+	__u8 z_state;
+	__u8 reserved[38];
+};
+
+struct virtio_blk_zone_report {
+	__virtio64 nr_zones;
+	__u8 reserved[56];
+	struct virtio_blk_zone_descriptor zones[];
+};
+
+/*
+ * Supported zone types.
+ */
+
+/* Conventional zone */
+#define VIRTIO_BLK_ZT_CONV         1
+/* Sequential Write Required zone */
+#define VIRTIO_BLK_ZT_SWR          2
+/* Sequential Write Preferred zone */
+#define VIRTIO_BLK_ZT_SWP          3
+
+/*
+ * Zone states that are available for zones of all types.
+ */
+
+/* Not a write pointer (conventional zones only) */
+#define VIRTIO_BLK_ZS_NOT_WP       0
+/* Empty */
+#define VIRTIO_BLK_ZS_EMPTY        1
+/* Implicitly Open */
+#define VIRTIO_BLK_ZS_IOPEN        2
+/* Explicitly Open */
+#define VIRTIO_BLK_ZS_EOPEN        3
+/* Closed */
+#define VIRTIO_BLK_ZS_CLOSED       4
+/* Read-Only */
+#define VIRTIO_BLK_ZS_RDONLY       13
+/* Full */
+#define VIRTIO_BLK_ZS_FULL         14
+/* Offline */
+#define VIRTIO_BLK_ZS_OFFLINE      15
+
 /* Unmap this range (only valid for write zeroes command) */
 #define VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP	0x00000001
 
@@ -219,4 +317,11 @@ struct virtio_scsi_inhdr {
 #define VIRTIO_BLK_S_OK		0
 #define VIRTIO_BLK_S_IOERR	1
 #define VIRTIO_BLK_S_UNSUPP	2
+
+/* Error codes that are specific to zoned block devices */
+#define VIRTIO_BLK_S_ZONE_INVALID_CMD     3
+#define VIRTIO_BLK_S_ZONE_UNALIGNED_WP    4
+#define VIRTIO_BLK_S_ZONE_OPEN_RESOURCE   5
+#define VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE 6
+
 #endif /* _LINUX_VIRTIO_BLK_H */
-- 
2.34.1

[virtio-dev] [PATCH v7 2/2] virtio-blk: add support for zoned block devices

[Dmitry Fomichev]

This patch adds support for Zoned Block Devices (ZBDs) to the kernel
virtio-blk driver.

The patch accompanies the virtio-blk ZBD support draft that is now
being proposed for standardization. The latest version of the draft is
linked at

https://github.com/oasis-tcs/virtio-spec/issues/143 .

The QEMU zoned device code that implements these protocol extensions
has been developed by Sam Li and it is currently in review at the QEMU
mailing list.

A number of virtblk request structure changes has been introduced to
accommodate the functionality that is specific to zoned block devices
and, most importantly, make room for carrying the Zoned Append sector
value from the device back to the driver along with the request status.

The zone-specific code in the patch is heavily influenced by NVMe ZNS
code in drivers/nvme/host/zns.c, but it is simpler because the proposed
virtio ZBD draft only covers the zoned device features that are
relevant to the zoned functionality provided by Linux block layer.

Co-developed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
---
 drivers/block/virtio_blk.c      | 457 ++++++++++++++++++++++++++++++--
 include/uapi/linux/virtio_blk.h | 105 ++++++++
 2 files changed, 543 insertions(+), 19 deletions(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 3efe3da5f8c2..310cd89c4bad 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -15,6 +15,7 @@
 #include <linux/blk-mq.h>
 #include <linux/blk-mq-virtio.h>
 #include <linux/numa.h>
+#include <linux/vmalloc.h>
 #include <uapi/linux/virtio_ring.h>
 
 #define PART_BITS 4
@@ -80,22 +81,51 @@ struct virtio_blk {
 	int num_vqs;
 	int io_queues[HCTX_MAX_TYPES];
 	struct virtio_blk_vq *vqs;
+
+	/* For zoned device */
+	unsigned int zone_sectors;
 };
 
 struct virtblk_req {
+	/* Out header */
 	struct virtio_blk_outhdr out_hdr;
-	u8 status;
+
+	/* In header */
+	union {
+		struct {
+			u8 status;
+		} common;
+
+		/*
+		 * The zone append command has an extended in header.
+		 * The status field in zone_append_in_hdr must always
+		 * be the last byte.
+		 */
+		struct {
+			__virtio64 sector;
+			u8 status;
+		} zone_append;
+	} in_hdr;
+
+	size_t in_hdr_len;
+
 	struct sg_table sg_table;
 	struct scatterlist sg[];
 };
 
-static inline blk_status_t virtblk_result(struct virtblk_req *vbr)
+static inline blk_status_t virtblk_result(u8 status)
 {
-	switch (vbr->status) {
+	switch (status) {
 	case VIRTIO_BLK_S_OK:
 		return BLK_STS_OK;
 	case VIRTIO_BLK_S_UNSUPP:
 		return BLK_STS_NOTSUPP;
+	case VIRTIO_BLK_S_ZONE_OPEN_RESOURCE:
+		return BLK_STS_ZONE_OPEN_RESOURCE;
+	case VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE:
+		return BLK_STS_ZONE_ACTIVE_RESOURCE;
+	case VIRTIO_BLK_S_IOERR:
+	case VIRTIO_BLK_S_ZONE_UNALIGNED_WP:
 	default:
 		return BLK_STS_IOERR;
 	}
@@ -111,11 +141,11 @@ static inline struct virtio_blk_vq *get_virtio_blk_vq(struct blk_mq_hw_ctx *hctx
 
 static int virtblk_add_req(struct virtqueue *vq, struct virtblk_req *vbr)
 {
-	struct scatterlist hdr, status, *sgs[3];
+	struct scatterlist out_hdr, in_hdr, *sgs[3];
 	unsigned int num_out = 0, num_in = 0;
 
-	sg_init_one(&hdr, &vbr->out_hdr, sizeof(vbr->out_hdr));
-	sgs[num_out++] = &hdr;
+	sg_init_one(&out_hdr, &vbr->out_hdr, sizeof(vbr->out_hdr));
+	sgs[num_out++] = &out_hdr;
 
 	if (vbr->sg_table.nents) {
 		if (vbr->out_hdr.type & cpu_to_virtio32(vq->vdev, VIRTIO_BLK_T_OUT))
@@ -124,8 +154,8 @@ static int virtblk_add_req(struct virtqueue *vq, struct virtblk_req *vbr)
 			sgs[num_out + num_in++] = vbr->sg_table.sgl;
 	}
 
-	sg_init_one(&status, &vbr->status, sizeof(vbr->status));
-	sgs[num_out + num_in++] = &status;
+	sg_init_one(&in_hdr, &vbr->in_hdr.common.status, vbr->in_hdr_len);
+	sgs[num_out + num_in++] = &in_hdr;
 
 	return virtqueue_add_sgs(vq, sgs, num_out, num_in, vbr, GFP_ATOMIC);
 }
@@ -214,21 +244,26 @@ static blk_status_t virtblk_setup_cmd(struct virtio_device *vdev,
 				      struct request *req,
 				      struct virtblk_req *vbr)
 {
+	size_t in_hdr_len = sizeof(vbr->in_hdr.common.status);
 	bool unmap = false;
 	u32 type;
+	u64 sector = 0;
 
-	vbr->out_hdr.sector = 0;
+	if (!IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
+		op_is_zone_mgmt(req_op(req)))
+		return BLK_STS_NOTSUPP;
+
+	/* Set fields for all request types */
+	vbr->out_hdr.ioprio = cpu_to_virtio32(vdev, req_get_ioprio(req));
 
 	switch (req_op(req)) {
 	case REQ_OP_READ:
 		type = VIRTIO_BLK_T_IN;
-		vbr->out_hdr.sector = cpu_to_virtio64(vdev,
-						      blk_rq_pos(req));
+		sector = blk_rq_pos(req);
 		break;
 	case REQ_OP_WRITE:
 		type = VIRTIO_BLK_T_OUT;
-		vbr->out_hdr.sector = cpu_to_virtio64(vdev,
-						      blk_rq_pos(req));
+		sector = blk_rq_pos(req);
 		break;
 	case REQ_OP_FLUSH:
 		type = VIRTIO_BLK_T_FLUSH;
@@ -243,16 +278,45 @@ static blk_status_t virtblk_setup_cmd(struct virtio_device *vdev,
 	case REQ_OP_SECURE_ERASE:
 		type = VIRTIO_BLK_T_SECURE_ERASE;
 		break;
-	case REQ_OP_DRV_IN:
-		type = VIRTIO_BLK_T_GET_ID;
+	case REQ_OP_ZONE_OPEN:
+		type = VIRTIO_BLK_T_ZONE_OPEN;
+		sector = blk_rq_pos(req);
 		break;
+	case REQ_OP_ZONE_CLOSE:
+		type = VIRTIO_BLK_T_ZONE_CLOSE;
+		sector = blk_rq_pos(req);
+		break;
+	case REQ_OP_ZONE_FINISH:
+		type = VIRTIO_BLK_T_ZONE_FINISH;
+		sector = blk_rq_pos(req);
+		break;
+	case REQ_OP_ZONE_APPEND:
+		type = VIRTIO_BLK_T_ZONE_APPEND;
+		sector = blk_rq_pos(req);
+		in_hdr_len = sizeof(vbr->in_hdr.zone_append);
+		break;
+	case REQ_OP_ZONE_RESET:
+		type = VIRTIO_BLK_T_ZONE_RESET;
+		sector = blk_rq_pos(req);
+		break;
+	case REQ_OP_ZONE_RESET_ALL:
+		type = VIRTIO_BLK_T_ZONE_RESET_ALL;
+		break;
+	case REQ_OP_DRV_IN:
+		/*
+		 * Out header has already been prepared by the caller (virtblk_get_id()
+		 * or virtblk_submit_zone_report()), nothing to do here.
+		 */
+		return 0;
 	default:
 		WARN_ON_ONCE(1);
 		return BLK_STS_IOERR;
 	}
 
+	/* Set fields for non-REQ_OP_DRV_IN request types */
+	vbr->in_hdr_len = in_hdr_len;
 	vbr->out_hdr.type = cpu_to_virtio32(vdev, type);
-	vbr->out_hdr.ioprio = cpu_to_virtio32(vdev, req_get_ioprio(req));
+	vbr->out_hdr.sector = cpu_to_virtio64(vdev, sector);
 
 	if (type == VIRTIO_BLK_T_DISCARD || type == VIRTIO_BLK_T_WRITE_ZEROES ||
 	    type == VIRTIO_BLK_T_SECURE_ERASE) {
@@ -263,13 +327,30 @@ static blk_status_t virtblk_setup_cmd(struct virtio_device *vdev,
 	return 0;
 }
 
+/*
+ * The status byte is always the last byte of the virtblk request
+ * in-header. This helper fetches its value for all in-header formats
+ * that are currently defined.
+ */
+static inline u8 virtblk_vbr_status(struct virtblk_req *vbr)
+{
+	return *((u8 *)&vbr->in_hdr + vbr->in_hdr_len - 1);
+}
+
 static inline void virtblk_request_done(struct request *req)
 {
 	struct virtblk_req *vbr = blk_mq_rq_to_pdu(req);
+	blk_status_t status = virtblk_result(virtblk_vbr_status(vbr));
+	struct virtio_blk *vblk = req->mq_hctx->queue->queuedata;
 
 	virtblk_unmap_data(req, vbr);
 	virtblk_cleanup_cmd(req);
-	blk_mq_end_request(req, virtblk_result(vbr));
+
+	if (req_op(req) == REQ_OP_ZONE_APPEND)
+		req->__sector = virtio64_to_cpu(vblk->vdev,
+						vbr->in_hdr.zone_append.sector);
+
+	blk_mq_end_request(req, status);
 }
 
 static void virtblk_done(struct virtqueue *vq)
@@ -455,6 +536,327 @@ static void virtio_queue_rqs(struct request **rqlist)
 	*rqlist = requeue_list;
 }
 
+#ifdef CONFIG_BLK_DEV_ZONED
+static void *virtblk_alloc_report_buffer(struct virtio_blk *vblk,
+					  unsigned int nr_zones,
+					  size_t *buflen)
+{
+	struct request_queue *q = vblk->disk->queue;
+	size_t bufsize;
+	void *buf;
+
+	nr_zones = min_t(unsigned int, nr_zones,
+			 get_capacity(vblk->disk) >> ilog2(vblk->zone_sectors));
+
+	bufsize = sizeof(struct virtio_blk_zone_report) +
+		nr_zones * sizeof(struct virtio_blk_zone_descriptor);
+	bufsize = min_t(size_t, bufsize,
+			queue_max_hw_sectors(q) << SECTOR_SHIFT);
+	bufsize = min_t(size_t, bufsize, queue_max_segments(q) << PAGE_SHIFT);
+
+	while (bufsize >= sizeof(struct virtio_blk_zone_report)) {
+		buf = __vmalloc(bufsize, GFP_KERNEL | __GFP_NORETRY);
+		if (buf) {
+			*buflen = bufsize;
+			return buf;
+		}
+		bufsize >>= 1;
+	}
+
+	return NULL;
+}
+
+static int virtblk_submit_zone_report(struct virtio_blk *vblk,
+				       char *report_buf, size_t report_len,
+				       sector_t sector)
+{
+	struct request_queue *q = vblk->disk->queue;
+	struct request *req;
+	struct virtblk_req *vbr;
+	int err;
+
+	req = blk_mq_alloc_request(q, REQ_OP_DRV_IN, 0);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	vbr = blk_mq_rq_to_pdu(req);
+	vbr->in_hdr_len = sizeof(vbr->in_hdr.common.status);
+	vbr->out_hdr.type = cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_ZONE_REPORT);
+	vbr->out_hdr.sector = cpu_to_virtio64(vblk->vdev, sector);
+
+	err = blk_rq_map_kern(q, req, report_buf, report_len, GFP_KERNEL);
+	if (err)
+		goto out;
+
+	blk_execute_rq(req, false);
+	err = blk_status_to_errno(virtblk_result(vbr->in_hdr.common.status));
+out:
+	blk_mq_free_request(req);
+	return err;
+}
+
+static int virtblk_parse_zone(struct virtio_blk *vblk,
+			       struct virtio_blk_zone_descriptor *entry,
+			       unsigned int idx, report_zones_cb cb, void *data)
+{
+	struct blk_zone zone = { };
+
+	zone.start = virtio64_to_cpu(vblk->vdev, entry->z_start);
+	if (zone.start + vblk->zone_sectors <= get_capacity(vblk->disk))
+		zone.len = vblk->zone_sectors;
+	else
+		zone.len = get_capacity(vblk->disk) - zone.start;
+	zone.capacity = virtio64_to_cpu(vblk->vdev, entry->z_cap);
+	zone.wp = virtio64_to_cpu(vblk->vdev, entry->z_wp);
+
+	switch (entry->z_type) {
+	case VIRTIO_BLK_ZT_SWR:
+		zone.type = BLK_ZONE_TYPE_SEQWRITE_REQ;
+		break;
+	case VIRTIO_BLK_ZT_SWP:
+		zone.type = BLK_ZONE_TYPE_SEQWRITE_PREF;
+		break;
+	case VIRTIO_BLK_ZT_CONV:
+		zone.type = BLK_ZONE_TYPE_CONVENTIONAL;
+		break;
+	default:
+		dev_err(&vblk->vdev->dev, "zone %llu: invalid type %#x\n",
+			zone.start, entry->z_type);
+		return -EIO;
+	}
+
+	switch (entry->z_state) {
+	case VIRTIO_BLK_ZS_EMPTY:
+		zone.cond = BLK_ZONE_COND_EMPTY;
+		break;
+	case VIRTIO_BLK_ZS_CLOSED:
+		zone.cond = BLK_ZONE_COND_CLOSED;
+		break;
+	case VIRTIO_BLK_ZS_FULL:
+		zone.cond = BLK_ZONE_COND_FULL;
+		zone.wp = zone.start + zone.len;
+		break;
+	case VIRTIO_BLK_ZS_EOPEN:
+		zone.cond = BLK_ZONE_COND_EXP_OPEN;
+		break;
+	case VIRTIO_BLK_ZS_IOPEN:
+		zone.cond = BLK_ZONE_COND_IMP_OPEN;
+		break;
+	case VIRTIO_BLK_ZS_NOT_WP:
+		zone.cond = BLK_ZONE_COND_NOT_WP;
+		break;
+	case VIRTIO_BLK_ZS_RDONLY:
+		zone.cond = BLK_ZONE_COND_READONLY;
+		zone.wp = ULONG_MAX;
+		break;
+	case VIRTIO_BLK_ZS_OFFLINE:
+		zone.cond = BLK_ZONE_COND_OFFLINE;
+		zone.wp = ULONG_MAX;
+		break;
+	default:
+		dev_err(&vblk->vdev->dev, "zone %llu: invalid condition %#x\n",
+			zone.start, entry->z_state);
+		return -EIO;
+	}
+
+	/*
+	 * The callback below checks the validity of the reported
+	 * entry data, no need to further validate it here.
+	 */
+	return cb(&zone, idx, data);
+}
+
+static int virtblk_report_zones(struct gendisk *disk, sector_t sector,
+				 unsigned int nr_zones, report_zones_cb cb,
+				 void *data)
+{
+	struct virtio_blk *vblk = disk->private_data;
+	struct virtio_blk_zone_report *report;
+	unsigned long long nz, i;
+	size_t buflen;
+	unsigned int zone_idx = 0;
+	int ret;
+
+	if (WARN_ON_ONCE(!vblk->zone_sectors))
+		return -EOPNOTSUPP;
+
+	report = virtblk_alloc_report_buffer(vblk, nr_zones, &buflen);
+	if (!report)
+		return -ENOMEM;
+
+	mutex_lock(&vblk->vdev_mutex);
+
+	if (!vblk->vdev) {
+		ret = -ENXIO;
+		goto fail_report;
+	}
+
+	while (zone_idx < nr_zones && sector < get_capacity(vblk->disk)) {
+		memset(report, 0, buflen);
+
+		ret = virtblk_submit_zone_report(vblk, (char *)report,
+						 buflen, sector);
+		if (ret)
+			goto fail_report;
+
+		nz = min_t(u64, virtio64_to_cpu(vblk->vdev, report->nr_zones),
+			   nr_zones);
+		if (!nz)
+			break;
+
+		for (i = 0; i < nz && zone_idx < nr_zones; i++) {
+			ret = virtblk_parse_zone(vblk, &report->zones[i],
+						 zone_idx, cb, data);
+			if (ret)
+				goto fail_report;
+
+			sector = virtio64_to_cpu(vblk->vdev,
+						 report->zones[i].z_start) +
+				 vblk->zone_sectors;
+			zone_idx++;
+		}
+	}
+
+	if (zone_idx > 0)
+		ret = zone_idx;
+	else
+		ret = -EINVAL;
+fail_report:
+	mutex_unlock(&vblk->vdev_mutex);
+	kvfree(report);
+	return ret;
+}
+
+static void virtblk_revalidate_zones(struct virtio_blk *vblk)
+{
+	u8 model;
+
+	virtio_cread(vblk->vdev, struct virtio_blk_config,
+		     zoned.model, &model);
+	switch (model) {
+	default:
+		dev_err(&vblk->vdev->dev, "unknown zone model %d\n", model);
+		fallthrough;
+	case VIRTIO_BLK_Z_NONE:
+	case VIRTIO_BLK_Z_HA:
+		disk_set_zoned(vblk->disk, BLK_ZONED_NONE);
+		return;
+	case VIRTIO_BLK_Z_HM:
+		WARN_ON_ONCE(!vblk->zone_sectors);
+		if (!blk_revalidate_disk_zones(vblk->disk, NULL))
+			set_capacity_and_notify(vblk->disk, 0);
+	}
+}
+
+static int virtblk_probe_zoned_device(struct virtio_device *vdev,
+				       struct virtio_blk *vblk,
+				       struct request_queue *q)
+{
+	u32 v, wg;
+	u8 model;
+	int ret;
+
+	virtio_cread(vdev, struct virtio_blk_config,
+		     zoned.model, &model);
+
+	switch (model) {
+	case VIRTIO_BLK_Z_NONE:
+	case VIRTIO_BLK_Z_HA:
+		/* Present the host-aware device as non-zoned */
+		return 0;
+	case VIRTIO_BLK_Z_HM:
+		break;
+	default:
+		dev_err(&vdev->dev, "unsupported zone model %d\n", model);
+		return -EINVAL;
+	}
+
+	dev_dbg(&vdev->dev, "probing host-managed zoned device\n");
+
+	disk_set_zoned(vblk->disk, BLK_ZONED_HM);
+	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
+
+	virtio_cread(vdev, struct virtio_blk_config,
+		     zoned.max_open_zones, &v);
+	disk_set_max_open_zones(vblk->disk, v);
+
+	dev_dbg(&vdev->dev, "max open zones = %u\n", v);
+
+	virtio_cread(vdev, struct virtio_blk_config,
+		     zoned.max_active_zones, &v);
+	disk_set_max_active_zones(vblk->disk, v);
+	dev_dbg(&vdev->dev, "max active zones = %u\n", v);
+
+	virtio_cread(vdev, struct virtio_blk_config,
+		     zoned.write_granularity, &wg);
+	if (!wg) {
+		dev_warn(&vdev->dev, "zero write granularity reported\n");
+		return -ENODEV;
+	}
+	blk_queue_physical_block_size(q, wg);
+	blk_queue_io_min(q, wg);
+
+	dev_dbg(&vdev->dev, "write granularity = %u\n", wg);
+
+	/*
+	 * virtio ZBD specification doesn't require zones to be a power of
+	 * two sectors in size, but the code in this driver expects that.
+	 */
+	virtio_cread(vdev, struct virtio_blk_config, zoned.zone_sectors,
+		     &vblk->zone_sectors);
+	if (vblk->zone_sectors == 0 || !is_power_of_2(vblk->zone_sectors)) {
+		dev_err(&vdev->dev,
+			"zoned device with non power of two zone size %u\n",
+			vblk->zone_sectors);
+		return -ENODEV;
+	}
+	dev_dbg(&vdev->dev, "zone sectors = %u\n", vblk->zone_sectors);
+
+	if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD)) {
+		dev_warn(&vblk->vdev->dev,
+			 "ignoring negotiated F_DISCARD for zoned device\n");
+		blk_queue_max_discard_sectors(q, 0);
+	}
+
+	ret = blk_revalidate_disk_zones(vblk->disk, NULL);
+	if (!ret) {
+		virtio_cread(vdev, struct virtio_blk_config,
+			     zoned.max_append_sectors, &v);
+		if (!v) {
+			dev_warn(&vdev->dev, "zero max_append_sectors reported\n");
+			return -ENODEV;
+		}
+		if ((v << SECTOR_SHIFT) < wg) {
+			dev_err(&vdev->dev,
+				"write granularity %u exceeds max_append_sectors %u limit\n",
+				wg, v);
+			return -ENODEV;
+		}
+
+		blk_queue_max_zone_append_sectors(q, v);
+		dev_dbg(&vdev->dev, "max append sectors = %u\n", v);
+	}
+
+	return ret;
+}
+
+#else
+
+/*
+ * Zoned block device support is not configured in this kernel.
+ * We only need to define a few symbols to avoid compilation errors.
+ */
+#define virtblk_report_zones       NULL
+static inline void virtblk_revalidate_zones(struct virtio_blk *vblk)
+{
+}
+static inline int virtblk_probe_zoned_device(struct virtio_device *vdev,
+			struct virtio_blk *vblk, struct request_queue *q)
+{
+	return -EOPNOTSUPP;
+}
+#endif /* CONFIG_BLK_DEV_ZONED */
+
 /* return id (s/n) string for *disk to *id_str
  */
 static int virtblk_get_id(struct gendisk *disk, char *id_str)
@@ -462,18 +864,24 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str)
 	struct virtio_blk *vblk = disk->private_data;
 	struct request_queue *q = vblk->disk->queue;
 	struct request *req;
+	struct virtblk_req *vbr;
 	int err;
 
 	req = blk_mq_alloc_request(q, REQ_OP_DRV_IN, 0);
 	if (IS_ERR(req))
 		return PTR_ERR(req);
 
+	vbr = blk_mq_rq_to_pdu(req);
+	vbr->in_hdr_len = sizeof(vbr->in_hdr.common.status);
+	vbr->out_hdr.type = cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_GET_ID);
+	vbr->out_hdr.sector = 0;
+
 	err = blk_rq_map_kern(q, req, id_str, VIRTIO_BLK_ID_BYTES, GFP_KERNEL);
 	if (err)
 		goto out;
 
 	blk_execute_rq(req, false);
-	err = blk_status_to_errno(virtblk_result(blk_mq_rq_to_pdu(req)));
+	err = blk_status_to_errno(virtblk_result(vbr->in_hdr.common.status));
 out:
 	blk_mq_free_request(req);
 	return err;
@@ -524,6 +932,7 @@ static const struct block_device_operations virtblk_fops = {
 	.owner  	= THIS_MODULE,
 	.getgeo		= virtblk_getgeo,
 	.free_disk	= virtblk_free_disk,
+	.report_zones	= virtblk_report_zones,
 };
 
 static int index_to_minor(int index)
@@ -594,6 +1003,7 @@ static void virtblk_config_changed_work(struct work_struct *work)
 	struct virtio_blk *vblk =
 		container_of(work, struct virtio_blk, config_work);
 
+	virtblk_revalidate_zones(vblk);
 	virtblk_update_capacity(vblk, true);
 }
 
@@ -861,7 +1271,7 @@ static int virtblk_poll(struct blk_mq_hw_ctx *hctx, struct io_comp_batch *iob)
 		struct request *req = blk_mq_rq_from_pdu(vbr);
 
 		found++;
-		if (!blk_mq_add_to_batch(req, iob, vbr->status,
+		if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr),
 						virtblk_complete_batch))
 			blk_mq_complete_request(req);
 	}
@@ -1150,6 +1560,12 @@ static int virtblk_probe(struct virtio_device *vdev)
 	virtblk_update_capacity(vblk, false);
 	virtio_device_ready(vdev);
 
+	if (virtio_has_feature(vdev, VIRTIO_BLK_F_ZONED)) {
+		err = virtblk_probe_zoned_device(vdev, vblk, q);
+		if (err)
+			goto out_cleanup_disk;
+	}
+
 	err = device_add_disk(&vdev->dev, vblk->disk, virtblk_attr_groups);
 	if (err)
 		goto out_cleanup_disk;
@@ -1251,6 +1667,9 @@ static unsigned int features[] = {
 	VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY, VIRTIO_BLK_F_CONFIG_WCE,
 	VIRTIO_BLK_F_MQ, VIRTIO_BLK_F_DISCARD, VIRTIO_BLK_F_WRITE_ZEROES,
 	VIRTIO_BLK_F_SECURE_ERASE,
+#ifdef CONFIG_BLK_DEV_ZONED
+	VIRTIO_BLK_F_ZONED,
+#endif /* CONFIG_BLK_DEV_ZONED */
 };
 
 static struct virtio_driver virtio_blk = {
diff --git a/include/uapi/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h
index 58e70b24b504..3744e4da1b2a 100644
--- a/include/uapi/linux/virtio_blk.h
+++ b/include/uapi/linux/virtio_blk.h
@@ -41,6 +41,7 @@
 #define VIRTIO_BLK_F_DISCARD	13	/* DISCARD is supported */
 #define VIRTIO_BLK_F_WRITE_ZEROES	14	/* WRITE ZEROES is supported */
 #define VIRTIO_BLK_F_SECURE_ERASE	16 /* Secure Erase is supported */
+#define VIRTIO_BLK_F_ZONED		17	/* Zoned block device */
 
 /* Legacy feature bits */
 #ifndef VIRTIO_BLK_NO_LEGACY
@@ -137,6 +138,16 @@ struct virtio_blk_config {
 	/* Secure erase commands must be aligned to this number of sectors. */
 	__virtio32 secure_erase_sector_alignment;
 
+	/* Zoned block device characteristics (if VIRTIO_BLK_F_ZONED) */
+	struct virtio_blk_zoned_characteristics {
+		__virtio32 zone_sectors;
+		__virtio32 max_open_zones;
+		__virtio32 max_active_zones;
+		__virtio32 max_append_sectors;
+		__virtio32 write_granularity;
+		__u8 model;
+		__u8 unused2[3];
+	} zoned;
 } __attribute__((packed));
 
 /*
@@ -174,6 +185,27 @@ struct virtio_blk_config {
 /* Secure erase command */
 #define VIRTIO_BLK_T_SECURE_ERASE	14
 
+/* Zone append command */
+#define VIRTIO_BLK_T_ZONE_APPEND    15
+
+/* Report zones command */
+#define VIRTIO_BLK_T_ZONE_REPORT    16
+
+/* Open zone command */
+#define VIRTIO_BLK_T_ZONE_OPEN      18
+
+/* Close zone command */
+#define VIRTIO_BLK_T_ZONE_CLOSE     20
+
+/* Finish zone command */
+#define VIRTIO_BLK_T_ZONE_FINISH    22
+
+/* Reset zone command */
+#define VIRTIO_BLK_T_ZONE_RESET     24
+
+/* Reset All zones command */
+#define VIRTIO_BLK_T_ZONE_RESET_ALL 26
+
 #ifndef VIRTIO_BLK_NO_LEGACY
 /* Barrier before this op. */
 #define VIRTIO_BLK_T_BARRIER	0x80000000
@@ -193,6 +225,72 @@ struct virtio_blk_outhdr {
 	__virtio64 sector;
 };
 
+/*
+ * Supported zoned device models.
+ */
+
+/* Regular block device */
+#define VIRTIO_BLK_Z_NONE      0
+/* Host-managed zoned device */
+#define VIRTIO_BLK_Z_HM        1
+/* Host-aware zoned device */
+#define VIRTIO_BLK_Z_HA        2
+
+/*
+ * Zone descriptor. A part of VIRTIO_BLK_T_ZONE_REPORT command reply.
+ */
+struct virtio_blk_zone_descriptor {
+	/* Zone capacity */
+	__virtio64 z_cap;
+	/* The starting sector of the zone */
+	__virtio64 z_start;
+	/* Zone write pointer position in sectors */
+	__virtio64 z_wp;
+	/* Zone type */
+	__u8 z_type;
+	/* Zone state */
+	__u8 z_state;
+	__u8 reserved[38];
+};
+
+struct virtio_blk_zone_report {
+	__virtio64 nr_zones;
+	__u8 reserved[56];
+	struct virtio_blk_zone_descriptor zones[];
+};
+
+/*
+ * Supported zone types.
+ */
+
+/* Conventional zone */
+#define VIRTIO_BLK_ZT_CONV         1
+/* Sequential Write Required zone */
+#define VIRTIO_BLK_ZT_SWR          2
+/* Sequential Write Preferred zone */
+#define VIRTIO_BLK_ZT_SWP          3
+
+/*
+ * Zone states that are available for zones of all types.
+ */
+
+/* Not a write pointer (conventional zones only) */
+#define VIRTIO_BLK_ZS_NOT_WP       0
+/* Empty */
+#define VIRTIO_BLK_ZS_EMPTY        1
+/* Implicitly Open */
+#define VIRTIO_BLK_ZS_IOPEN        2
+/* Explicitly Open */
+#define VIRTIO_BLK_ZS_EOPEN        3
+/* Closed */
+#define VIRTIO_BLK_ZS_CLOSED       4
+/* Read-Only */
+#define VIRTIO_BLK_ZS_RDONLY       13
+/* Full */
+#define VIRTIO_BLK_ZS_FULL         14
+/* Offline */
+#define VIRTIO_BLK_ZS_OFFLINE      15
+
 /* Unmap this range (only valid for write zeroes command) */
 #define VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP	0x00000001
 
@@ -219,4 +317,11 @@ struct virtio_scsi_inhdr {
 #define VIRTIO_BLK_S_OK		0
 #define VIRTIO_BLK_S_IOERR	1
 #define VIRTIO_BLK_S_UNSUPP	2
+
+/* Error codes that are specific to zoned block devices */
+#define VIRTIO_BLK_S_ZONE_INVALID_CMD     3
+#define VIRTIO_BLK_S_ZONE_UNALIGNED_WP    4
+#define VIRTIO_BLK_S_ZONE_OPEN_RESOURCE   5
+#define VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE 6
+
 #endif /* _LINUX_VIRTIO_BLK_H */
-- 
2.34.1


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

Re: [PATCH v7 0/2] virtio-blk: support zoned block devices

[Stefan Hajnoczi]

On Thu, 10 Nov 2022 at 00:39, Dmitry Fomichev <dmitry.fomichev@wdc.com> wrote:
>
> In its current form, the virtio protocol for block devices (virtio-blk)
> is not aware of zoned block devices (ZBDs) but it allows the driver to
> successfully scan a host-managed drive provided by the virtio block
> device. As the result, the host-managed drive is recognized by the
> virtio driver as a regular, non-zoned drive that will operate
> erroneously under the most common write workloads. Host-aware ZBDs are
> currently usable, but their performance may not be optimal because the
> driver can only see them as non-zoned block devices.
>
> To fix this, the virtio-blk protocol needs to be extended to add the
> capabilities to convey the zone characteristics of ZBDs at the device
> side to the driver and to provide support for ZBD-specific commands -
> Report Zones, four zone operations (Open, Close, Finish and Reset) and
> (optionally) Zone Append.
>
> The required virtio-blk protocol extensions are currently under review
> at OASIS Technical Committee and the specification patch is linked at
>
> https://github.com/oasis-tcs/virtio-spec/issues/143 .

This patch series can be merged as soon as the VIRTIO spec change is accepted.

Stefan