* [PATCH 00/22] phy: qcom-qmp-combo: preparatory cleanups (set 2/3)
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Here's a set of preparatory cleanups needed to fix the devicetree
binding and add (proper) support for SC8280XP to the combo driver but
that are otherwise self-contained.
The full series is over forty patches and I'll be posting these in three
parts of which this is the second. In an effort to get all of these into
6.2, I'll also be submitting all three series before waiting for the
previous ones to be applied.
This series specifically separates the USB and DP PHY ops
implementations, and merges the USB and DP driver data and
configurations.
Johan
Johan Hovold (22):
phy: qcom-qmp-combo: sort device-id table
phy: qcom-qmp-combo: move device-id table
phy: qcom-qmp-combo: move pm ops
phy: qcom-qmp-combo: rename PHY ops structures
phy: qcom-qmp-combo: drop unused DP PHY mode op
phy: qcom-qmp-combo: rename USB PHY ops
phy: qcom-qmp-combo: drop unnecessary debug message
phy: qcom-qmp-combo: separate USB and DP init ops
phy: qcom-qmp-combo: rename DP PHY ops
phy: qcom-qmp-combo: separate USB and DP power-on ops
phy: qcom-qmp-combo: clean up serdes initialisation
phy: qcom-qmp-combo: separate USB and DP devicetree parsing
phy: qcom-qmp-combo: add dedicated DP iomem pointers
phy: qcom-qmp-combo: clean up DP configurations
phy: qcom-qmp-combo: rename sc8280xp config
phy: qcom-qmp-combo: add DP configuration tables
phy: qcom-qmp-combo: merge USB and DP configurations
phy: qcom-qmp-combo: merge driver data
phy: qcom-qmp-combo: clean up device-tree parsing
phy: qcom-qmp-combo: clean up probe initialisation
phy: qcom-qmp-combo: clean up PHY init
phy: qcom-qmp-combo: clean up DP callback names
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 1328 ++++++++++-----------
1 file changed, 611 insertions(+), 717 deletions(-)
--
2.37.4
^ permalink raw reply [flat|nested] 108+ messages in thread
* [PATCH 00/22] phy: qcom-qmp-combo: preparatory cleanups (set 2/3)
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Here's a set of preparatory cleanups needed to fix the devicetree
binding and add (proper) support for SC8280XP to the combo driver but
that are otherwise self-contained.
The full series is over forty patches and I'll be posting these in three
parts of which this is the second. In an effort to get all of these into
6.2, I'll also be submitting all three series before waiting for the
previous ones to be applied.
This series specifically separates the USB and DP PHY ops
implementations, and merges the USB and DP driver data and
configurations.
Johan
Johan Hovold (22):
phy: qcom-qmp-combo: sort device-id table
phy: qcom-qmp-combo: move device-id table
phy: qcom-qmp-combo: move pm ops
phy: qcom-qmp-combo: rename PHY ops structures
phy: qcom-qmp-combo: drop unused DP PHY mode op
phy: qcom-qmp-combo: rename USB PHY ops
phy: qcom-qmp-combo: drop unnecessary debug message
phy: qcom-qmp-combo: separate USB and DP init ops
phy: qcom-qmp-combo: rename DP PHY ops
phy: qcom-qmp-combo: separate USB and DP power-on ops
phy: qcom-qmp-combo: clean up serdes initialisation
phy: qcom-qmp-combo: separate USB and DP devicetree parsing
phy: qcom-qmp-combo: add dedicated DP iomem pointers
phy: qcom-qmp-combo: clean up DP configurations
phy: qcom-qmp-combo: rename sc8280xp config
phy: qcom-qmp-combo: add DP configuration tables
phy: qcom-qmp-combo: merge USB and DP configurations
phy: qcom-qmp-combo: merge driver data
phy: qcom-qmp-combo: clean up device-tree parsing
phy: qcom-qmp-combo: clean up probe initialisation
phy: qcom-qmp-combo: clean up PHY init
phy: qcom-qmp-combo: clean up DP callback names
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 1328 ++++++++++-----------
1 file changed, 611 insertions(+), 717 deletions(-)
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* [PATCH 01/22] phy: qcom-qmp-combo: sort device-id table
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Sort the device-id table by compatible string to make it easier to find
and add new entries.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index c7a926d548d8..d6a031bcfc30 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2651,14 +2651,6 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
.compatible = "qcom,sc7180-qmp-usb3-dp-phy",
.data = &sc7180_usb3dpphy_cfg,
},
- {
- .compatible = "qcom,sdm845-qmp-usb3-dp-phy",
- .data = &sdm845_usb3dpphy_cfg,
- },
- {
- .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
- .data = &sm8250_usb3dpphy_cfg,
- },
{
.compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
.data = &sc8180x_usb3dpphy_cfg,
@@ -2667,6 +2659,14 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
.compatible = "qcom,sc8280xp-qmp-usb43dp-phy",
.data = &sc8280xp_usb43dpphy_combo_cfg,
},
+ {
+ .compatible = "qcom,sdm845-qmp-usb3-dp-phy",
+ .data = &sdm845_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ .data = &sm8250_usb3dpphy_cfg,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, qmp_combo_of_match_table);
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 01/22] phy: qcom-qmp-combo: sort device-id table
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Sort the device-id table by compatible string to make it easier to find
and add new entries.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index c7a926d548d8..d6a031bcfc30 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2651,14 +2651,6 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
.compatible = "qcom,sc7180-qmp-usb3-dp-phy",
.data = &sc7180_usb3dpphy_cfg,
},
- {
- .compatible = "qcom,sdm845-qmp-usb3-dp-phy",
- .data = &sdm845_usb3dpphy_cfg,
- },
- {
- .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
- .data = &sm8250_usb3dpphy_cfg,
- },
{
.compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
.data = &sc8180x_usb3dpphy_cfg,
@@ -2667,6 +2659,14 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
.compatible = "qcom,sc8280xp-qmp-usb43dp-phy",
.data = &sc8280xp_usb43dpphy_combo_cfg,
},
+ {
+ .compatible = "qcom,sdm845-qmp-usb3-dp-phy",
+ .data = &sdm845_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ .data = &sm8250_usb3dpphy_cfg,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, qmp_combo_of_match_table);
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 02/22] phy: qcom-qmp-combo: move device-id table
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Move the device-id table after probe() and next to the driver structure
to keep the driver callback functions grouped together.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 50 +++++++++++------------
1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index d6a031bcfc30..e7c8c4417142 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2646,31 +2646,6 @@ static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
return 0;
}
-static const struct of_device_id qmp_combo_of_match_table[] = {
- {
- .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
- .data = &sc7180_usb3dpphy_cfg,
- },
- {
- .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
- .data = &sc8180x_usb3dpphy_cfg,
- },
- {
- .compatible = "qcom,sc8280xp-qmp-usb43dp-phy",
- .data = &sc8280xp_usb43dpphy_combo_cfg,
- },
- {
- .compatible = "qcom,sdm845-qmp-usb3-dp-phy",
- .data = &sdm845_usb3dpphy_cfg,
- },
- {
- .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
- .data = &sm8250_usb3dpphy_cfg,
- },
- { }
-};
-MODULE_DEVICE_TABLE(of, qmp_combo_of_match_table);
-
static const struct dev_pm_ops qmp_combo_pm_ops = {
SET_RUNTIME_PM_OPS(qmp_combo_runtime_suspend,
qmp_combo_runtime_resume, NULL)
@@ -2815,6 +2790,31 @@ static int qmp_combo_probe(struct platform_device *pdev)
return ret;
}
+static const struct of_device_id qmp_combo_of_match_table[] = {
+ {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ .data = &sc7180_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ .data = &sc8180x_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sc8280xp-qmp-usb43dp-phy",
+ .data = &sc8280xp_usb43dpphy_combo_cfg,
+ },
+ {
+ .compatible = "qcom,sdm845-qmp-usb3-dp-phy",
+ .data = &sdm845_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ .data = &sm8250_usb3dpphy_cfg,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qmp_combo_of_match_table);
+
static struct platform_driver qmp_combo_driver = {
.probe = qmp_combo_probe,
.driver = {
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 02/22] phy: qcom-qmp-combo: move device-id table
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Move the device-id table after probe() and next to the driver structure
to keep the driver callback functions grouped together.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 50 +++++++++++------------
1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index d6a031bcfc30..e7c8c4417142 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2646,31 +2646,6 @@ static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
return 0;
}
-static const struct of_device_id qmp_combo_of_match_table[] = {
- {
- .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
- .data = &sc7180_usb3dpphy_cfg,
- },
- {
- .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
- .data = &sc8180x_usb3dpphy_cfg,
- },
- {
- .compatible = "qcom,sc8280xp-qmp-usb43dp-phy",
- .data = &sc8280xp_usb43dpphy_combo_cfg,
- },
- {
- .compatible = "qcom,sdm845-qmp-usb3-dp-phy",
- .data = &sdm845_usb3dpphy_cfg,
- },
- {
- .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
- .data = &sm8250_usb3dpphy_cfg,
- },
- { }
-};
-MODULE_DEVICE_TABLE(of, qmp_combo_of_match_table);
-
static const struct dev_pm_ops qmp_combo_pm_ops = {
SET_RUNTIME_PM_OPS(qmp_combo_runtime_suspend,
qmp_combo_runtime_resume, NULL)
@@ -2815,6 +2790,31 @@ static int qmp_combo_probe(struct platform_device *pdev)
return ret;
}
+static const struct of_device_id qmp_combo_of_match_table[] = {
+ {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ .data = &sc7180_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+ .data = &sc8180x_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sc8280xp-qmp-usb43dp-phy",
+ .data = &sc8280xp_usb43dpphy_combo_cfg,
+ },
+ {
+ .compatible = "qcom,sdm845-qmp-usb3-dp-phy",
+ .data = &sdm845_usb3dpphy_cfg,
+ },
+ {
+ .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+ .data = &sm8250_usb3dpphy_cfg,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qmp_combo_of_match_table);
+
static struct platform_driver qmp_combo_driver = {
.probe = qmp_combo_probe,
.driver = {
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 03/22] phy: qcom-qmp-combo: move pm ops
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Move the PM ops structure next to the implementation to keep the driver
callbacks grouped.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index e7c8c4417142..2ac29b71d3b7 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2216,6 +2216,11 @@ static int __maybe_unused qmp_combo_runtime_resume(struct device *dev)
return 0;
}
+static const struct dev_pm_ops qmp_combo_pm_ops = {
+ SET_RUNTIME_PM_OPS(qmp_combo_runtime_suspend,
+ qmp_combo_runtime_resume, NULL)
+};
+
static int qmp_combo_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
@@ -2646,11 +2651,6 @@ static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
return 0;
}
-static const struct dev_pm_ops qmp_combo_pm_ops = {
- SET_RUNTIME_PM_OPS(qmp_combo_runtime_suspend,
- qmp_combo_runtime_resume, NULL)
-};
-
static int qmp_combo_probe(struct platform_device *pdev)
{
struct qcom_qmp *qmp;
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 03/22] phy: qcom-qmp-combo: move pm ops
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Move the PM ops structure next to the implementation to keep the driver
callbacks grouped.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index e7c8c4417142..2ac29b71d3b7 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2216,6 +2216,11 @@ static int __maybe_unused qmp_combo_runtime_resume(struct device *dev)
return 0;
}
+static const struct dev_pm_ops qmp_combo_pm_ops = {
+ SET_RUNTIME_PM_OPS(qmp_combo_runtime_suspend,
+ qmp_combo_runtime_resume, NULL)
+};
+
static int qmp_combo_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
@@ -2646,11 +2651,6 @@ static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
return 0;
}
-static const struct dev_pm_ops qmp_combo_pm_ops = {
- SET_RUNTIME_PM_OPS(qmp_combo_runtime_suspend,
- qmp_combo_runtime_resume, NULL)
-};
-
static int qmp_combo_probe(struct platform_device *pdev)
{
struct qcom_qmp *qmp;
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 04/22] phy: qcom-qmp-combo: rename PHY ops structures
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Rename the PHY operation structures so that they have a "phy_ops" suffix
and move them next to the implementation.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 40 +++++++++++------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 2ac29b71d3b7..13800c2243e1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2118,6 +2118,24 @@ static int qmp_combo_set_mode(struct phy *phy, enum phy_mode mode, int submode)
return 0;
}
+static const struct phy_ops qmp_combo_usb_phy_ops = {
+ .init = qmp_combo_enable,
+ .exit = qmp_combo_disable,
+ .set_mode = qmp_combo_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops qmp_combo_dp_phy_ops = {
+ .init = qmp_combo_init,
+ .configure = qcom_qmp_dp_phy_configure,
+ .power_on = qmp_combo_power_on,
+ .calibrate = qcom_qmp_dp_phy_calibrate,
+ .power_off = qmp_combo_power_off,
+ .exit = qmp_combo_exit,
+ .set_mode = qmp_combo_set_mode,
+ .owner = THIS_MODULE,
+};
+
static void qmp_combo_enable_autonomous_mode(struct qmp_phy *qphy)
{
const struct qmp_phy_cfg *cfg = qphy->cfg;
@@ -2542,24 +2560,6 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
}
-static const struct phy_ops qmp_combo_usb_ops = {
- .init = qmp_combo_enable,
- .exit = qmp_combo_disable,
- .set_mode = qmp_combo_set_mode,
- .owner = THIS_MODULE,
-};
-
-static const struct phy_ops qmp_combo_dp_ops = {
- .init = qmp_combo_init,
- .configure = qcom_qmp_dp_phy_configure,
- .power_on = qmp_combo_power_on,
- .calibrate = qcom_qmp_dp_phy_calibrate,
- .power_off = qmp_combo_power_off,
- .exit = qmp_combo_exit,
- .set_mode = qmp_combo_set_mode,
- .owner = THIS_MODULE,
-};
-
static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
void __iomem *serdes, const struct qmp_phy_cfg *cfg)
{
@@ -2632,9 +2632,9 @@ static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
}
if (cfg->type == PHY_TYPE_DP)
- ops = &qmp_combo_dp_ops;
+ ops = &qmp_combo_dp_phy_ops;
else
- ops = &qmp_combo_usb_ops;
+ ops = &qmp_combo_usb_phy_ops;
generic_phy = devm_phy_create(dev, np, ops);
if (IS_ERR(generic_phy)) {
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 04/22] phy: qcom-qmp-combo: rename PHY ops structures
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Rename the PHY operation structures so that they have a "phy_ops" suffix
and move them next to the implementation.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 40 +++++++++++------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 2ac29b71d3b7..13800c2243e1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2118,6 +2118,24 @@ static int qmp_combo_set_mode(struct phy *phy, enum phy_mode mode, int submode)
return 0;
}
+static const struct phy_ops qmp_combo_usb_phy_ops = {
+ .init = qmp_combo_enable,
+ .exit = qmp_combo_disable,
+ .set_mode = qmp_combo_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct phy_ops qmp_combo_dp_phy_ops = {
+ .init = qmp_combo_init,
+ .configure = qcom_qmp_dp_phy_configure,
+ .power_on = qmp_combo_power_on,
+ .calibrate = qcom_qmp_dp_phy_calibrate,
+ .power_off = qmp_combo_power_off,
+ .exit = qmp_combo_exit,
+ .set_mode = qmp_combo_set_mode,
+ .owner = THIS_MODULE,
+};
+
static void qmp_combo_enable_autonomous_mode(struct qmp_phy *qphy)
{
const struct qmp_phy_cfg *cfg = qphy->cfg;
@@ -2542,24 +2560,6 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
}
-static const struct phy_ops qmp_combo_usb_ops = {
- .init = qmp_combo_enable,
- .exit = qmp_combo_disable,
- .set_mode = qmp_combo_set_mode,
- .owner = THIS_MODULE,
-};
-
-static const struct phy_ops qmp_combo_dp_ops = {
- .init = qmp_combo_init,
- .configure = qcom_qmp_dp_phy_configure,
- .power_on = qmp_combo_power_on,
- .calibrate = qcom_qmp_dp_phy_calibrate,
- .power_off = qmp_combo_power_off,
- .exit = qmp_combo_exit,
- .set_mode = qmp_combo_set_mode,
- .owner = THIS_MODULE,
-};
-
static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
void __iomem *serdes, const struct qmp_phy_cfg *cfg)
{
@@ -2632,9 +2632,9 @@ static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
}
if (cfg->type == PHY_TYPE_DP)
- ops = &qmp_combo_dp_ops;
+ ops = &qmp_combo_dp_phy_ops;
else
- ops = &qmp_combo_usb_ops;
+ ops = &qmp_combo_usb_phy_ops;
generic_phy = devm_phy_create(dev, np, ops);
if (IS_ERR(generic_phy)) {
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 05/22] phy: qcom-qmp-combo: drop unused DP PHY mode op
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
The set-mode operation is currently only used by the USB part of the
PHY so drop the corresponding callback from the DP PHY ops.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 13800c2243e1..cec487560fd7 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2132,7 +2132,6 @@ static const struct phy_ops qmp_combo_dp_phy_ops = {
.calibrate = qcom_qmp_dp_phy_calibrate,
.power_off = qmp_combo_power_off,
.exit = qmp_combo_exit,
- .set_mode = qmp_combo_set_mode,
.owner = THIS_MODULE,
};
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 05/22] phy: qcom-qmp-combo: drop unused DP PHY mode op
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
The set-mode operation is currently only used by the USB part of the
PHY so drop the corresponding callback from the DP PHY ops.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 13800c2243e1..cec487560fd7 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2132,7 +2132,6 @@ static const struct phy_ops qmp_combo_dp_phy_ops = {
.calibrate = qcom_qmp_dp_phy_calibrate,
.power_off = qmp_combo_power_off,
.exit = qmp_combo_exit,
- .set_mode = qmp_combo_set_mode,
.owner = THIS_MODULE,
};
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 06/22] phy: qcom-qmp-combo: rename USB PHY ops
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Add a "usb" infix to the USB PHY operation functions and name them
after the corresponding operations (e.g. "init" rather than "enable").
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index cec487560fd7..bf0874d22d91 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2084,7 +2084,7 @@ static int qmp_combo_exit(struct phy *phy)
return 0;
}
-static int qmp_combo_enable(struct phy *phy)
+static int qmp_combo_usb_init(struct phy *phy)
{
int ret;
@@ -2099,7 +2099,7 @@ static int qmp_combo_enable(struct phy *phy)
return ret;
}
-static int qmp_combo_disable(struct phy *phy)
+static int qmp_combo_usb_exit(struct phy *phy)
{
int ret;
@@ -2109,7 +2109,7 @@ static int qmp_combo_disable(struct phy *phy)
return qmp_combo_exit(phy);
}
-static int qmp_combo_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+static int qmp_combo_usb_set_mode(struct phy *phy, enum phy_mode mode, int submode)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
@@ -2119,9 +2119,9 @@ static int qmp_combo_set_mode(struct phy *phy, enum phy_mode mode, int submode)
}
static const struct phy_ops qmp_combo_usb_phy_ops = {
- .init = qmp_combo_enable,
- .exit = qmp_combo_disable,
- .set_mode = qmp_combo_set_mode,
+ .init = qmp_combo_usb_init,
+ .exit = qmp_combo_usb_exit,
+ .set_mode = qmp_combo_usb_set_mode,
.owner = THIS_MODULE,
};
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 06/22] phy: qcom-qmp-combo: rename USB PHY ops
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Add a "usb" infix to the USB PHY operation functions and name them
after the corresponding operations (e.g. "init" rather than "enable").
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index cec487560fd7..bf0874d22d91 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2084,7 +2084,7 @@ static int qmp_combo_exit(struct phy *phy)
return 0;
}
-static int qmp_combo_enable(struct phy *phy)
+static int qmp_combo_usb_init(struct phy *phy)
{
int ret;
@@ -2099,7 +2099,7 @@ static int qmp_combo_enable(struct phy *phy)
return ret;
}
-static int qmp_combo_disable(struct phy *phy)
+static int qmp_combo_usb_exit(struct phy *phy)
{
int ret;
@@ -2109,7 +2109,7 @@ static int qmp_combo_disable(struct phy *phy)
return qmp_combo_exit(phy);
}
-static int qmp_combo_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+static int qmp_combo_usb_set_mode(struct phy *phy, enum phy_mode mode, int submode)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
@@ -2119,9 +2119,9 @@ static int qmp_combo_set_mode(struct phy *phy, enum phy_mode mode, int submode)
}
static const struct phy_ops qmp_combo_usb_phy_ops = {
- .init = qmp_combo_enable,
- .exit = qmp_combo_disable,
- .set_mode = qmp_combo_set_mode,
+ .init = qmp_combo_usb_init,
+ .exit = qmp_combo_usb_exit,
+ .set_mode = qmp_combo_usb_set_mode,
.owner = THIS_MODULE,
};
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 07/22] phy: qcom-qmp-combo: drop unnecessary debug message
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Drop the unnecessary (verbose) debug message from the init PHY op.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index bf0874d22d91..ae04f6219fd2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1967,10 +1967,8 @@ static int qmp_combo_com_exit(struct qmp_phy *qphy)
static int qmp_combo_init(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
- struct qcom_qmp *qmp = qphy->qmp;
const struct qmp_phy_cfg *cfg = qphy->cfg;
int ret;
- dev_vdbg(qmp->dev, "Initializing QMP phy\n");
ret = qmp_combo_com_init(qphy);
if (ret)
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 07/22] phy: qcom-qmp-combo: drop unnecessary debug message
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Drop the unnecessary (verbose) debug message from the init PHY op.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index bf0874d22d91..ae04f6219fd2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1967,10 +1967,8 @@ static int qmp_combo_com_exit(struct qmp_phy *qphy)
static int qmp_combo_init(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
- struct qcom_qmp *qmp = qphy->qmp;
const struct qmp_phy_cfg *cfg = qphy->cfg;
int ret;
- dev_vdbg(qmp->dev, "Initializing QMP phy\n");
ret = qmp_combo_com_init(qphy);
if (ret)
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 08/22] phy: qcom-qmp-combo: separate USB and DP init ops
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Separate the USB and DP init and exit operations by calling the common
initialisation code directly from the USB operation and adding a "dp"
infix to the DP callbacks.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 36 ++++++++++++-----------
1 file changed, 19 insertions(+), 17 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index ae04f6219fd2..5d985195df38 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1964,7 +1964,7 @@ static int qmp_combo_com_exit(struct qmp_phy *qphy)
return 0;
}
-static int qmp_combo_init(struct phy *phy)
+static int qmp_combo_dp_init(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qphy->cfg;
@@ -1974,8 +1974,16 @@ static int qmp_combo_init(struct phy *phy)
if (ret)
return ret;
- if (cfg->type == PHY_TYPE_DP)
- cfg->dp_aux_init(qphy);
+ cfg->dp_aux_init(qphy);
+
+ return 0;
+}
+
+static int qmp_combo_dp_exit(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+
+ qmp_combo_com_exit(qphy);
return 0;
}
@@ -2073,38 +2081,32 @@ static int qmp_combo_power_off(struct phy *phy)
return 0;
}
-static int qmp_combo_exit(struct phy *phy)
-{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
-
- qmp_combo_com_exit(qphy);
-
- return 0;
-}
-
static int qmp_combo_usb_init(struct phy *phy)
{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
int ret;
- ret = qmp_combo_init(phy);
+ ret = qmp_combo_com_init(qphy);
if (ret)
return ret;
ret = qmp_combo_power_on(phy);
if (ret)
- qmp_combo_exit(phy);
+ qmp_combo_com_exit(qphy);
return ret;
}
static int qmp_combo_usb_exit(struct phy *phy)
{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
int ret;
ret = qmp_combo_power_off(phy);
if (ret)
return ret;
- return qmp_combo_exit(phy);
+
+ return qmp_combo_com_exit(qphy);
}
static int qmp_combo_usb_set_mode(struct phy *phy, enum phy_mode mode, int submode)
@@ -2124,12 +2126,12 @@ static const struct phy_ops qmp_combo_usb_phy_ops = {
};
static const struct phy_ops qmp_combo_dp_phy_ops = {
- .init = qmp_combo_init,
+ .init = qmp_combo_dp_init,
.configure = qcom_qmp_dp_phy_configure,
.power_on = qmp_combo_power_on,
.calibrate = qcom_qmp_dp_phy_calibrate,
.power_off = qmp_combo_power_off,
- .exit = qmp_combo_exit,
+ .exit = qmp_combo_dp_exit,
.owner = THIS_MODULE,
};
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 08/22] phy: qcom-qmp-combo: separate USB and DP init ops
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Separate the USB and DP init and exit operations by calling the common
initialisation code directly from the USB operation and adding a "dp"
infix to the DP callbacks.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 36 ++++++++++++-----------
1 file changed, 19 insertions(+), 17 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index ae04f6219fd2..5d985195df38 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1964,7 +1964,7 @@ static int qmp_combo_com_exit(struct qmp_phy *qphy)
return 0;
}
-static int qmp_combo_init(struct phy *phy)
+static int qmp_combo_dp_init(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qphy->cfg;
@@ -1974,8 +1974,16 @@ static int qmp_combo_init(struct phy *phy)
if (ret)
return ret;
- if (cfg->type == PHY_TYPE_DP)
- cfg->dp_aux_init(qphy);
+ cfg->dp_aux_init(qphy);
+
+ return 0;
+}
+
+static int qmp_combo_dp_exit(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+
+ qmp_combo_com_exit(qphy);
return 0;
}
@@ -2073,38 +2081,32 @@ static int qmp_combo_power_off(struct phy *phy)
return 0;
}
-static int qmp_combo_exit(struct phy *phy)
-{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
-
- qmp_combo_com_exit(qphy);
-
- return 0;
-}
-
static int qmp_combo_usb_init(struct phy *phy)
{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
int ret;
- ret = qmp_combo_init(phy);
+ ret = qmp_combo_com_init(qphy);
if (ret)
return ret;
ret = qmp_combo_power_on(phy);
if (ret)
- qmp_combo_exit(phy);
+ qmp_combo_com_exit(qphy);
return ret;
}
static int qmp_combo_usb_exit(struct phy *phy)
{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
int ret;
ret = qmp_combo_power_off(phy);
if (ret)
return ret;
- return qmp_combo_exit(phy);
+
+ return qmp_combo_com_exit(qphy);
}
static int qmp_combo_usb_set_mode(struct phy *phy, enum phy_mode mode, int submode)
@@ -2124,12 +2126,12 @@ static const struct phy_ops qmp_combo_usb_phy_ops = {
};
static const struct phy_ops qmp_combo_dp_phy_ops = {
- .init = qmp_combo_init,
+ .init = qmp_combo_dp_init,
.configure = qcom_qmp_dp_phy_configure,
.power_on = qmp_combo_power_on,
.calibrate = qcom_qmp_dp_phy_calibrate,
.power_off = qmp_combo_power_off,
- .exit = qmp_combo_exit,
+ .exit = qmp_combo_dp_exit,
.owner = THIS_MODULE,
};
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 09/22] phy: qcom-qmp-combo: rename DP PHY ops
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Rename the configure and calibrate DP PHY ops using the common prefix
for consistency.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 5d985195df38..7392ae460fd7 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1842,7 +1842,7 @@ static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
return 0;
}
-static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+static int qmp_combo_dp_configure(struct phy *phy, union phy_configure_opts *opts)
{
const struct phy_configure_opts_dp *dp_opts = &opts->dp;
struct qmp_phy *qphy = phy_get_drvdata(phy);
@@ -1857,7 +1857,7 @@ static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *
return 0;
}
-static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
+static int qmp_combo_dp_calibrate(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qphy->cfg;
@@ -2127,9 +2127,9 @@ static const struct phy_ops qmp_combo_usb_phy_ops = {
static const struct phy_ops qmp_combo_dp_phy_ops = {
.init = qmp_combo_dp_init,
- .configure = qcom_qmp_dp_phy_configure,
+ .configure = qmp_combo_dp_configure,
.power_on = qmp_combo_power_on,
- .calibrate = qcom_qmp_dp_phy_calibrate,
+ .calibrate = qmp_combo_dp_calibrate,
.power_off = qmp_combo_power_off,
.exit = qmp_combo_dp_exit,
.owner = THIS_MODULE,
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 09/22] phy: qcom-qmp-combo: rename DP PHY ops
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Rename the configure and calibrate DP PHY ops using the common prefix
for consistency.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 5d985195df38..7392ae460fd7 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1842,7 +1842,7 @@ static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
return 0;
}
-static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+static int qmp_combo_dp_configure(struct phy *phy, union phy_configure_opts *opts)
{
const struct phy_configure_opts_dp *dp_opts = &opts->dp;
struct qmp_phy *qphy = phy_get_drvdata(phy);
@@ -1857,7 +1857,7 @@ static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *
return 0;
}
-static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
+static int qmp_combo_dp_calibrate(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qphy->cfg;
@@ -2127,9 +2127,9 @@ static const struct phy_ops qmp_combo_usb_phy_ops = {
static const struct phy_ops qmp_combo_dp_phy_ops = {
.init = qmp_combo_dp_init,
- .configure = qcom_qmp_dp_phy_configure,
+ .configure = qmp_combo_dp_configure,
.power_on = qmp_combo_power_on,
- .calibrate = qcom_qmp_dp_phy_calibrate,
+ .calibrate = qmp_combo_dp_calibrate,
.power_off = qmp_combo_power_off,
.exit = qmp_combo_dp_exit,
.owner = THIS_MODULE,
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 10/22] phy: qcom-qmp-combo: separate USB and DP power-on ops
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Separate the USB and DP power-on and power-off operations in two
dedicated implementations.
Note that the pipe clock is only used by the USB part of the PHY and
that no DP configuration has a pcs (or rx) table or has has_pwrdn_delay
set.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 100 +++++++++++++---------
1 file changed, 59 insertions(+), 41 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 7392ae460fd7..748fd32a6f72 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1988,7 +1988,39 @@ static int qmp_combo_dp_exit(struct phy *phy)
return 0;
}
-static int qmp_combo_power_on(struct phy *phy)
+static int qmp_combo_dp_power_on(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *tx = qphy->tx;
+
+ qmp_combo_serdes_init(qphy);
+
+ qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
+
+ if (cfg->lanes >= 2)
+ qmp_combo_configure_lane(qphy->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
+
+ /* Configure special DP tx tunings */
+ cfg->configure_dp_tx(qphy);
+
+ /* Configure link rate, swing, etc. */
+ cfg->configure_dp_phy(qphy);
+
+ return 0;
+}
+
+static int qmp_combo_dp_power_off(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+
+ /* Assert DP PHY power down */
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ return 0;
+}
+
+static int qmp_combo_usb_power_on(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
struct qcom_qmp *qmp = qphy->qmp;
@@ -2014,39 +2046,30 @@ static int qmp_combo_power_on(struct phy *phy)
if (cfg->lanes >= 2)
qmp_combo_configure_lane(qphy->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
- /* Configure special DP tx tunings */
- if (cfg->type == PHY_TYPE_DP)
- cfg->configure_dp_tx(qphy);
-
qmp_combo_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
if (cfg->lanes >= 2)
qmp_combo_configure_lane(qphy->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
- /* Configure link rate, swing, etc. */
- if (cfg->type == PHY_TYPE_DP)
- cfg->configure_dp_phy(qphy);
- else
- qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+ qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
if (cfg->has_pwrdn_delay)
usleep_range(10, 20);
- if (cfg->type != PHY_TYPE_DP) {
- /* Pull PHY out of reset state */
- qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
- /* start SerDes and Phy-Coding-Sublayer */
- qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL],
- SERDES_START | PCS_START);
+ /* Pull PHY out of reset state */
+ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
- status = pcs + cfg->regs[QPHY_PCS_STATUS];
- ret = readl_poll_timeout(status, val, !(val & PHYSTATUS), 200,
- PHY_INIT_COMPLETE_TIMEOUT);
- if (ret) {
- dev_err(qmp->dev, "phy initialization timed-out\n");
- goto err_disable_pipe_clk;
- }
+ /* start SerDes and Phy-Coding-Sublayer */
+ qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], SERDES_START | PCS_START);
+
+ status = pcs + cfg->regs[QPHY_PCS_STATUS];
+ ret = readl_poll_timeout(status, val, !(val & PHYSTATUS), 200,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev, "phy initialization timed-out\n");
+ goto err_disable_pipe_clk;
}
+
return 0;
err_disable_pipe_clk:
@@ -2055,28 +2078,23 @@ static int qmp_combo_power_on(struct phy *phy)
return ret;
}
-static int qmp_combo_power_off(struct phy *phy)
+static int qmp_combo_usb_power_off(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qphy->cfg;
clk_disable_unprepare(qphy->pipe_clk);
- if (cfg->type == PHY_TYPE_DP) {
- /* Assert DP PHY power down */
- writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
- } else {
- /* PHY reset */
- qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+ /* PHY reset */
+ qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
- /* stop SerDes and Phy-Coding-Sublayer */
- qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL],
- SERDES_START | PCS_START);
+ /* stop SerDes and Phy-Coding-Sublayer */
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL],
+ SERDES_START | PCS_START);
- /* Put PHY into POWER DOWN state: active low */
- qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
- SW_PWRDN);
- }
+ /* Put PHY into POWER DOWN state: active low */
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ SW_PWRDN);
return 0;
}
@@ -2090,7 +2108,7 @@ static int qmp_combo_usb_init(struct phy *phy)
if (ret)
return ret;
- ret = qmp_combo_power_on(phy);
+ ret = qmp_combo_usb_power_on(phy);
if (ret)
qmp_combo_com_exit(qphy);
@@ -2102,7 +2120,7 @@ static int qmp_combo_usb_exit(struct phy *phy)
struct qmp_phy *qphy = phy_get_drvdata(phy);
int ret;
- ret = qmp_combo_power_off(phy);
+ ret = qmp_combo_usb_power_off(phy);
if (ret)
return ret;
@@ -2128,9 +2146,9 @@ static const struct phy_ops qmp_combo_usb_phy_ops = {
static const struct phy_ops qmp_combo_dp_phy_ops = {
.init = qmp_combo_dp_init,
.configure = qmp_combo_dp_configure,
- .power_on = qmp_combo_power_on,
+ .power_on = qmp_combo_dp_power_on,
.calibrate = qmp_combo_dp_calibrate,
- .power_off = qmp_combo_power_off,
+ .power_off = qmp_combo_dp_power_off,
.exit = qmp_combo_dp_exit,
.owner = THIS_MODULE,
};
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 10/22] phy: qcom-qmp-combo: separate USB and DP power-on ops
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Separate the USB and DP power-on and power-off operations in two
dedicated implementations.
Note that the pipe clock is only used by the USB part of the PHY and
that no DP configuration has a pcs (or rx) table or has has_pwrdn_delay
set.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 100 +++++++++++++---------
1 file changed, 59 insertions(+), 41 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 7392ae460fd7..748fd32a6f72 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1988,7 +1988,39 @@ static int qmp_combo_dp_exit(struct phy *phy)
return 0;
}
-static int qmp_combo_power_on(struct phy *phy)
+static int qmp_combo_dp_power_on(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *tx = qphy->tx;
+
+ qmp_combo_serdes_init(qphy);
+
+ qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
+
+ if (cfg->lanes >= 2)
+ qmp_combo_configure_lane(qphy->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
+
+ /* Configure special DP tx tunings */
+ cfg->configure_dp_tx(qphy);
+
+ /* Configure link rate, swing, etc. */
+ cfg->configure_dp_phy(qphy);
+
+ return 0;
+}
+
+static int qmp_combo_dp_power_off(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+
+ /* Assert DP PHY power down */
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+
+ return 0;
+}
+
+static int qmp_combo_usb_power_on(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
struct qcom_qmp *qmp = qphy->qmp;
@@ -2014,39 +2046,30 @@ static int qmp_combo_power_on(struct phy *phy)
if (cfg->lanes >= 2)
qmp_combo_configure_lane(qphy->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
- /* Configure special DP tx tunings */
- if (cfg->type == PHY_TYPE_DP)
- cfg->configure_dp_tx(qphy);
-
qmp_combo_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
if (cfg->lanes >= 2)
qmp_combo_configure_lane(qphy->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
- /* Configure link rate, swing, etc. */
- if (cfg->type == PHY_TYPE_DP)
- cfg->configure_dp_phy(qphy);
- else
- qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+ qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
if (cfg->has_pwrdn_delay)
usleep_range(10, 20);
- if (cfg->type != PHY_TYPE_DP) {
- /* Pull PHY out of reset state */
- qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
- /* start SerDes and Phy-Coding-Sublayer */
- qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL],
- SERDES_START | PCS_START);
+ /* Pull PHY out of reset state */
+ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
- status = pcs + cfg->regs[QPHY_PCS_STATUS];
- ret = readl_poll_timeout(status, val, !(val & PHYSTATUS), 200,
- PHY_INIT_COMPLETE_TIMEOUT);
- if (ret) {
- dev_err(qmp->dev, "phy initialization timed-out\n");
- goto err_disable_pipe_clk;
- }
+ /* start SerDes and Phy-Coding-Sublayer */
+ qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], SERDES_START | PCS_START);
+
+ status = pcs + cfg->regs[QPHY_PCS_STATUS];
+ ret = readl_poll_timeout(status, val, !(val & PHYSTATUS), 200,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev, "phy initialization timed-out\n");
+ goto err_disable_pipe_clk;
}
+
return 0;
err_disable_pipe_clk:
@@ -2055,28 +2078,23 @@ static int qmp_combo_power_on(struct phy *phy)
return ret;
}
-static int qmp_combo_power_off(struct phy *phy)
+static int qmp_combo_usb_power_off(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qphy->cfg;
clk_disable_unprepare(qphy->pipe_clk);
- if (cfg->type == PHY_TYPE_DP) {
- /* Assert DP PHY power down */
- writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
- } else {
- /* PHY reset */
- qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+ /* PHY reset */
+ qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
- /* stop SerDes and Phy-Coding-Sublayer */
- qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL],
- SERDES_START | PCS_START);
+ /* stop SerDes and Phy-Coding-Sublayer */
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL],
+ SERDES_START | PCS_START);
- /* Put PHY into POWER DOWN state: active low */
- qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
- SW_PWRDN);
- }
+ /* Put PHY into POWER DOWN state: active low */
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ SW_PWRDN);
return 0;
}
@@ -2090,7 +2108,7 @@ static int qmp_combo_usb_init(struct phy *phy)
if (ret)
return ret;
- ret = qmp_combo_power_on(phy);
+ ret = qmp_combo_usb_power_on(phy);
if (ret)
qmp_combo_com_exit(qphy);
@@ -2102,7 +2120,7 @@ static int qmp_combo_usb_exit(struct phy *phy)
struct qmp_phy *qphy = phy_get_drvdata(phy);
int ret;
- ret = qmp_combo_power_off(phy);
+ ret = qmp_combo_usb_power_off(phy);
if (ret)
return ret;
@@ -2128,9 +2146,9 @@ static const struct phy_ops qmp_combo_usb_phy_ops = {
static const struct phy_ops qmp_combo_dp_phy_ops = {
.init = qmp_combo_dp_init,
.configure = qmp_combo_dp_configure,
- .power_on = qmp_combo_power_on,
+ .power_on = qmp_combo_dp_power_on,
.calibrate = qmp_combo_dp_calibrate,
- .power_off = qmp_combo_power_off,
+ .power_off = qmp_combo_dp_power_off,
.exit = qmp_combo_dp_exit,
.owner = THIS_MODULE,
};
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 11/22] phy: qcom-qmp-combo: clean up serdes initialisation
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Clean up serdes initialisation somewhat by making the current helper a
dedicated helper for the DP part of the PHY.
Note that no error is currently returned for non-supported link rates.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 49 +++++++++++------------
1 file changed, 24 insertions(+), 25 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 748fd32a6f72..c059e4aeecdb 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1313,7 +1313,7 @@ static void qmp_combo_configure(void __iomem *base,
qmp_combo_configure_lane(base, tbl, num, 0xff);
}
-static int qmp_combo_serdes_init(struct qmp_phy *qphy)
+static int qmp_combo_dp_serdes_init(struct qmp_phy *qphy)
{
const struct qmp_phy_cfg *cfg = qphy->cfg;
void __iomem *serdes = qphy->serdes;
@@ -1323,28 +1323,26 @@ static int qmp_combo_serdes_init(struct qmp_phy *qphy)
qmp_combo_configure(serdes, serdes_tbl, serdes_tbl_num);
- if (cfg->type == PHY_TYPE_DP) {
- switch (dp_opts->link_rate) {
- case 1620:
- qmp_combo_configure(serdes, cfg->serdes_tbl_rbr,
- cfg->serdes_tbl_rbr_num);
- break;
- case 2700:
- qmp_combo_configure(serdes, cfg->serdes_tbl_hbr,
- cfg->serdes_tbl_hbr_num);
- break;
- case 5400:
- qmp_combo_configure(serdes, cfg->serdes_tbl_hbr2,
- cfg->serdes_tbl_hbr2_num);
- break;
- case 8100:
- qmp_combo_configure(serdes, cfg->serdes_tbl_hbr3,
- cfg->serdes_tbl_hbr3_num);
- break;
- default:
- /* Other link rates aren't supported */
- return -EINVAL;
- }
+ switch (dp_opts->link_rate) {
+ case 1620:
+ qmp_combo_configure(serdes, cfg->serdes_tbl_rbr,
+ cfg->serdes_tbl_rbr_num);
+ break;
+ case 2700:
+ qmp_combo_configure(serdes, cfg->serdes_tbl_hbr,
+ cfg->serdes_tbl_hbr_num);
+ break;
+ case 5400:
+ qmp_combo_configure(serdes, cfg->serdes_tbl_hbr2,
+ cfg->serdes_tbl_hbr2_num);
+ break;
+ case 8100:
+ qmp_combo_configure(serdes, cfg->serdes_tbl_hbr3,
+ cfg->serdes_tbl_hbr3_num);
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
}
return 0;
@@ -1994,7 +1992,7 @@ static int qmp_combo_dp_power_on(struct phy *phy)
const struct qmp_phy_cfg *cfg = qphy->cfg;
void __iomem *tx = qphy->tx;
- qmp_combo_serdes_init(qphy);
+ qmp_combo_dp_serdes_init(qphy);
qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
@@ -2025,6 +2023,7 @@ static int qmp_combo_usb_power_on(struct phy *phy)
struct qmp_phy *qphy = phy_get_drvdata(phy);
struct qcom_qmp *qmp = qphy->qmp;
const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
void __iomem *tx = qphy->tx;
void __iomem *rx = qphy->rx;
void __iomem *pcs = qphy->pcs;
@@ -2032,7 +2031,7 @@ static int qmp_combo_usb_power_on(struct phy *phy)
unsigned int val;
int ret;
- qmp_combo_serdes_init(qphy);
+ qmp_combo_configure(serdes, cfg->serdes_tbl, cfg->serdes_tbl_num);
ret = clk_prepare_enable(qphy->pipe_clk);
if (ret) {
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 11/22] phy: qcom-qmp-combo: clean up serdes initialisation
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Clean up serdes initialisation somewhat by making the current helper a
dedicated helper for the DP part of the PHY.
Note that no error is currently returned for non-supported link rates.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 49 +++++++++++------------
1 file changed, 24 insertions(+), 25 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 748fd32a6f72..c059e4aeecdb 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1313,7 +1313,7 @@ static void qmp_combo_configure(void __iomem *base,
qmp_combo_configure_lane(base, tbl, num, 0xff);
}
-static int qmp_combo_serdes_init(struct qmp_phy *qphy)
+static int qmp_combo_dp_serdes_init(struct qmp_phy *qphy)
{
const struct qmp_phy_cfg *cfg = qphy->cfg;
void __iomem *serdes = qphy->serdes;
@@ -1323,28 +1323,26 @@ static int qmp_combo_serdes_init(struct qmp_phy *qphy)
qmp_combo_configure(serdes, serdes_tbl, serdes_tbl_num);
- if (cfg->type == PHY_TYPE_DP) {
- switch (dp_opts->link_rate) {
- case 1620:
- qmp_combo_configure(serdes, cfg->serdes_tbl_rbr,
- cfg->serdes_tbl_rbr_num);
- break;
- case 2700:
- qmp_combo_configure(serdes, cfg->serdes_tbl_hbr,
- cfg->serdes_tbl_hbr_num);
- break;
- case 5400:
- qmp_combo_configure(serdes, cfg->serdes_tbl_hbr2,
- cfg->serdes_tbl_hbr2_num);
- break;
- case 8100:
- qmp_combo_configure(serdes, cfg->serdes_tbl_hbr3,
- cfg->serdes_tbl_hbr3_num);
- break;
- default:
- /* Other link rates aren't supported */
- return -EINVAL;
- }
+ switch (dp_opts->link_rate) {
+ case 1620:
+ qmp_combo_configure(serdes, cfg->serdes_tbl_rbr,
+ cfg->serdes_tbl_rbr_num);
+ break;
+ case 2700:
+ qmp_combo_configure(serdes, cfg->serdes_tbl_hbr,
+ cfg->serdes_tbl_hbr_num);
+ break;
+ case 5400:
+ qmp_combo_configure(serdes, cfg->serdes_tbl_hbr2,
+ cfg->serdes_tbl_hbr2_num);
+ break;
+ case 8100:
+ qmp_combo_configure(serdes, cfg->serdes_tbl_hbr3,
+ cfg->serdes_tbl_hbr3_num);
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
}
return 0;
@@ -1994,7 +1992,7 @@ static int qmp_combo_dp_power_on(struct phy *phy)
const struct qmp_phy_cfg *cfg = qphy->cfg;
void __iomem *tx = qphy->tx;
- qmp_combo_serdes_init(qphy);
+ qmp_combo_dp_serdes_init(qphy);
qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
@@ -2025,6 +2023,7 @@ static int qmp_combo_usb_power_on(struct phy *phy)
struct qmp_phy *qphy = phy_get_drvdata(phy);
struct qcom_qmp *qmp = qphy->qmp;
const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
void __iomem *tx = qphy->tx;
void __iomem *rx = qphy->rx;
void __iomem *pcs = qphy->pcs;
@@ -2032,7 +2031,7 @@ static int qmp_combo_usb_power_on(struct phy *phy)
unsigned int val;
int ret;
- qmp_combo_serdes_init(qphy);
+ qmp_combo_configure(serdes, cfg->serdes_tbl, cfg->serdes_tbl_num);
ret = clk_prepare_enable(qphy->pipe_clk);
if (ret) {
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 12/22] phy: qcom-qmp-combo: separate USB and DP devicetree parsing
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Separate the devicetree parsing of the USB and DP child nodes in two
dedicated helpers in preparation for merging the driver data.
Note that only the USB part of the PHY has a pipe clock and that the DP
implementation only uses the tx/tx2 and pcs register regions.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 81 ++++++++++++++++-------
1 file changed, 58 insertions(+), 23 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index c059e4aeecdb..52a00b51f09a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2576,13 +2576,63 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
}
-static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
+static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int id,
+ void __iomem *serdes, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct phy *generic_phy;
+ struct qmp_phy *qphy;
+ int ret;
+
+ qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
+ if (!qphy)
+ return -ENOMEM;
+
+ qphy->cfg = cfg;
+ qphy->serdes = serdes;
+ /*
+ * Get memory resources for each PHY:
+ * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
+ * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
+ * For single lane PHYs: pcs_misc (optional) -> 3.
+ *
+ * Note that only tx/tx2 and pcs are used by the DP implementation.
+ */
+ qphy->tx = devm_of_iomap(dev, np, 0, NULL);
+ if (IS_ERR(qphy->tx))
+ return PTR_ERR(qphy->tx);
+
+ qphy->pcs = devm_of_iomap(dev, np, 2, NULL);
+ if (IS_ERR(qphy->pcs))
+ return PTR_ERR(qphy->pcs);
+
+ if (cfg->lanes >= 2) {
+ qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
+ if (IS_ERR(qphy->tx2))
+ return PTR_ERR(qphy->tx2);
+ }
+
+ generic_phy = devm_phy_create(dev, np, &qmp_combo_dp_phy_ops);
+ if (IS_ERR(generic_phy)) {
+ ret = PTR_ERR(generic_phy);
+ dev_err(dev, "failed to create DP PHY: %d\n", ret);
+ return ret;
+ }
+
+ qphy->phy = generic_phy;
+ qphy->qmp = qmp;
+ qmp->phys[id] = qphy;
+ phy_set_drvdata(generic_phy, qphy);
+
+ return 0;
+}
+
+static int qmp_combo_create_usb(struct device *dev, struct device_node *np, int id,
void __iomem *serdes, const struct qmp_phy_cfg *cfg)
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
struct phy *generic_phy;
struct qmp_phy *qphy;
- const struct phy_ops *ops;
int ret;
qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
@@ -2631,31 +2681,16 @@ static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
qphy->pcs_misc = NULL;
}
- /*
- * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
- * based phys, so they essentially have pipe clock. So,
- * we return error in case phy is USB3 or PIPE type.
- * Otherwise, we initialize pipe clock to NULL for
- * all phys that don't need this.
- */
qphy->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
if (IS_ERR(qphy->pipe_clk)) {
- if (cfg->type == PHY_TYPE_USB3)
- return dev_err_probe(dev, PTR_ERR(qphy->pipe_clk),
- "failed to get lane%d pipe_clk\n",
- id);
- qphy->pipe_clk = NULL;
+ return dev_err_probe(dev, PTR_ERR(qphy->pipe_clk),
+ "failed to get lane%d pipe_clk\n", id);
}
- if (cfg->type == PHY_TYPE_DP)
- ops = &qmp_combo_dp_phy_ops;
- else
- ops = &qmp_combo_usb_phy_ops;
-
- generic_phy = devm_phy_create(dev, np, ops);
+ generic_phy = devm_phy_create(dev, np, &qmp_combo_usb_phy_ops);
if (IS_ERR(generic_phy)) {
ret = PTR_ERR(generic_phy);
- dev_err(dev, "failed to create qphy %d\n", ret);
+ dev_err(dev, "failed to create USB PHY: %d\n", ret);
return ret;
}
@@ -2752,7 +2787,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
serdes = dp_serdes;
/* Create per-lane phy */
- ret = qmp_combo_create(dev, child, id, serdes, cfg);
+ ret = qmp_combo_create_dp(dev, child, id, serdes, cfg);
if (ret) {
dev_err(dev, "failed to create lane%d phy, %d\n",
id, ret);
@@ -2770,7 +2805,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
serdes = usb_serdes;
/* Create per-lane phy */
- ret = qmp_combo_create(dev, child, id, serdes, cfg);
+ ret = qmp_combo_create_usb(dev, child, id, serdes, cfg);
if (ret) {
dev_err(dev, "failed to create lane%d phy, %d\n",
id, ret);
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 12/22] phy: qcom-qmp-combo: separate USB and DP devicetree parsing
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Separate the devicetree parsing of the USB and DP child nodes in two
dedicated helpers in preparation for merging the driver data.
Note that only the USB part of the PHY has a pipe clock and that the DP
implementation only uses the tx/tx2 and pcs register regions.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 81 ++++++++++++++++-------
1 file changed, 58 insertions(+), 23 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index c059e4aeecdb..52a00b51f09a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2576,13 +2576,63 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
}
-static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
+static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int id,
+ void __iomem *serdes, const struct qmp_phy_cfg *cfg)
+{
+ struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct phy *generic_phy;
+ struct qmp_phy *qphy;
+ int ret;
+
+ qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
+ if (!qphy)
+ return -ENOMEM;
+
+ qphy->cfg = cfg;
+ qphy->serdes = serdes;
+ /*
+ * Get memory resources for each PHY:
+ * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
+ * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
+ * For single lane PHYs: pcs_misc (optional) -> 3.
+ *
+ * Note that only tx/tx2 and pcs are used by the DP implementation.
+ */
+ qphy->tx = devm_of_iomap(dev, np, 0, NULL);
+ if (IS_ERR(qphy->tx))
+ return PTR_ERR(qphy->tx);
+
+ qphy->pcs = devm_of_iomap(dev, np, 2, NULL);
+ if (IS_ERR(qphy->pcs))
+ return PTR_ERR(qphy->pcs);
+
+ if (cfg->lanes >= 2) {
+ qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
+ if (IS_ERR(qphy->tx2))
+ return PTR_ERR(qphy->tx2);
+ }
+
+ generic_phy = devm_phy_create(dev, np, &qmp_combo_dp_phy_ops);
+ if (IS_ERR(generic_phy)) {
+ ret = PTR_ERR(generic_phy);
+ dev_err(dev, "failed to create DP PHY: %d\n", ret);
+ return ret;
+ }
+
+ qphy->phy = generic_phy;
+ qphy->qmp = qmp;
+ qmp->phys[id] = qphy;
+ phy_set_drvdata(generic_phy, qphy);
+
+ return 0;
+}
+
+static int qmp_combo_create_usb(struct device *dev, struct device_node *np, int id,
void __iomem *serdes, const struct qmp_phy_cfg *cfg)
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
struct phy *generic_phy;
struct qmp_phy *qphy;
- const struct phy_ops *ops;
int ret;
qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
@@ -2631,31 +2681,16 @@ static int qmp_combo_create(struct device *dev, struct device_node *np, int id,
qphy->pcs_misc = NULL;
}
- /*
- * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
- * based phys, so they essentially have pipe clock. So,
- * we return error in case phy is USB3 or PIPE type.
- * Otherwise, we initialize pipe clock to NULL for
- * all phys that don't need this.
- */
qphy->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
if (IS_ERR(qphy->pipe_clk)) {
- if (cfg->type == PHY_TYPE_USB3)
- return dev_err_probe(dev, PTR_ERR(qphy->pipe_clk),
- "failed to get lane%d pipe_clk\n",
- id);
- qphy->pipe_clk = NULL;
+ return dev_err_probe(dev, PTR_ERR(qphy->pipe_clk),
+ "failed to get lane%d pipe_clk\n", id);
}
- if (cfg->type == PHY_TYPE_DP)
- ops = &qmp_combo_dp_phy_ops;
- else
- ops = &qmp_combo_usb_phy_ops;
-
- generic_phy = devm_phy_create(dev, np, ops);
+ generic_phy = devm_phy_create(dev, np, &qmp_combo_usb_phy_ops);
if (IS_ERR(generic_phy)) {
ret = PTR_ERR(generic_phy);
- dev_err(dev, "failed to create qphy %d\n", ret);
+ dev_err(dev, "failed to create USB PHY: %d\n", ret);
return ret;
}
@@ -2752,7 +2787,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
serdes = dp_serdes;
/* Create per-lane phy */
- ret = qmp_combo_create(dev, child, id, serdes, cfg);
+ ret = qmp_combo_create_dp(dev, child, id, serdes, cfg);
if (ret) {
dev_err(dev, "failed to create lane%d phy, %d\n",
id, ret);
@@ -2770,7 +2805,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
serdes = usb_serdes;
/* Create per-lane phy */
- ret = qmp_combo_create(dev, child, id, serdes, cfg);
+ ret = qmp_combo_create_usb(dev, child, id, serdes, cfg);
if (ret) {
dev_err(dev, "failed to create lane%d phy, %d\n",
id, ret);
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 13/22] phy: qcom-qmp-combo: add dedicated DP iomem pointers
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
In preparation for merging the driver data, add separate iomem pointers
for the DP part of the PHY.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 246 +++++++++++-----------
1 file changed, 126 insertions(+), 120 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 52a00b51f09a..bd7b6f72e866 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -895,6 +895,12 @@ struct qmp_phy {
void __iomem *rx2;
void __iomem *pcs_misc;
void __iomem *pcs_usb;
+
+ void __iomem *dp_serdes;
+ void __iomem *dp_tx;
+ void __iomem *dp_tx2;
+ void __iomem *dp_pcs;
+
struct clk *pipe_clk;
struct qcom_qmp *qmp;
enum phy_mode mode;
@@ -1316,7 +1322,7 @@ static void qmp_combo_configure(void __iomem *base,
static int qmp_combo_dp_serdes_init(struct qmp_phy *qphy)
{
const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *serdes = qphy->serdes;
+ void __iomem *serdes = qphy->dp_serdes;
const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
int serdes_tbl_num = cfg->serdes_tbl_num;
@@ -1352,43 +1358,43 @@ static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
- qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
/* Turn on BIAS current for PHY/PLL */
writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
- qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+ qphy->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
- writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_LANE_0_1_PWRDN |
DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
DP_PHY_PD_CTL_DP_CLAMP_EN,
- qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
writel(QSERDES_V3_COM_BIAS_EN |
QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
- qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
-
- writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
- writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
- writel(0x24, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
- writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
- writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
- writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
- writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
- writel(0xbb, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
- writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qphy->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0x24, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xbb, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG9);
qphy->dp_aux_cfg = 0;
writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
PHY_AUX_REQ_ERR_MASK,
- qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
+ qphy->dp_pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
}
static int qmp_combo_configure_dp_swing(struct qmp_phy *qphy,
@@ -1421,10 +1427,10 @@ static int qmp_combo_configure_dp_swing(struct qmp_phy *qphy,
voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
- writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
- writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
- writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
- writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
+ writel(voltage_swing_cfg, qphy->dp_tx + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->dp_tx + emp_post_reg);
+ writel(voltage_swing_cfg, qphy->dp_tx2 + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->dp_tx2 + emp_post_reg);
return 0;
}
@@ -1446,10 +1452,10 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
drvr_en = 0x10;
}
- writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
- writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
- writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
- writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qphy->dp_tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->dp_tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qphy->dp_tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->dp_tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
}
static bool qmp_combo_configure_dp_mode(struct qmp_phy *qphy)
@@ -1472,12 +1478,12 @@ static bool qmp_combo_configure_dp_mode(struct qmp_phy *qphy)
* if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
* val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
* if (orientation == ORIENTATION_CC2)
- * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
+ * writel(0x4c, qphy->dp_pcs + QSERDES_V3_DP_PHY_MODE);
*/
val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
- writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ writel(val, qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
- writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
+ writel(0x5c, qphy->dp_pcs + QSERDES_DP_PHY_MODE);
return reverse;
}
@@ -1491,8 +1497,8 @@ static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
qmp_combo_configure_dp_mode(qphy);
- writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
- writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
+ writel(0x05, qphy->dp_pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->dp_pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
switch (dp_opts->link_rate) {
case 1620:
@@ -1515,40 +1521,40 @@ static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
/* Other link rates aren't supported */
return -EINVAL;
}
- writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
+ writel(phy_vco_div, qphy->dp_pcs + QSERDES_V3_DP_PHY_VCO_DIV);
clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
- writel(0x04, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
- writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
- writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
- writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x04, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
+ writel(0x20, qphy->dp_serdes + QSERDES_V3_COM_RESETSM_CNTRL);
- if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
+ if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V3_COM_C_READY_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V3_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x18, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
udelay(2000);
- writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ return readl_poll_timeout(qphy->dp_pcs + QSERDES_V3_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
@@ -1568,7 +1574,7 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
val = cfg1_settings[qphy->dp_aux_cfg];
- writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(val, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
return 0;
}
@@ -1577,37 +1583,37 @@ static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
- qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
/* Turn on BIAS current for PHY/PLL */
- writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
-
- writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
- writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
- writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
- writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
- writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
- writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
- writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
- writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
- writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ writel(0x17, qphy->dp_serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xb7, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG9);
qphy->dp_aux_cfg = 0;
writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
PHY_AUX_REQ_ERR_MASK,
- qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
+ qphy->dp_pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
}
static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
{
/* Program default values before writing proper values */
- writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
- writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
qmp_combo_configure_dp_swing(qphy, QSERDES_V4_TX_TX_DRV_LVL,
QSERDES_V4_TX_TX_EMP_POST1_LVL);
@@ -1620,15 +1626,15 @@ static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_phy *qphy)
u32 phy_vco_div, status;
unsigned long pixel_freq;
- writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
+ writel(0x0f, qphy->dp_pcs + QSERDES_V4_DP_PHY_CFG_1);
qmp_combo_configure_dp_mode(qphy);
- writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
- writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x13, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
- writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
+ writel(0x05, qphy->dp_pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->dp_pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
switch (dp_opts->link_rate) {
case 1620:
@@ -1651,49 +1657,49 @@ static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_phy *qphy)
/* Other link rates aren't supported */
return -EINVAL;
}
- writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
+ writel(phy_vco_div, qphy->dp_pcs + QSERDES_V4_DP_PHY_VCO_DIV);
clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
- writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
- writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
- writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
- writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
+ writel(0x20, qphy->dp_serdes + QSERDES_V4_COM_RESETSM_CNTRL);
- if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
+ if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V4_COM_C_READY_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
@@ -1737,30 +1743,30 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
drvr1_en = 0x10;
}
- writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
- writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
- writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
- writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr0_en, qphy->dp_tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qphy->dp_tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qphy->dp_tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qphy->dp_tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
- writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x18, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
udelay(2000);
- writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
- writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qphy->dp_tx + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qphy->dp_tx2 + QSERDES_V4_TX_TX_POL_INV);
- writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
- writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
return 0;
}
@@ -1794,30 +1800,30 @@ static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy)
drvr1_en = 0x10;
}
- writel(drvr0_en, qphy->tx + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
- writel(bias0_en, qphy->tx + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
- writel(drvr1_en, qphy->tx2 + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
- writel(bias1_en, qphy->tx2 + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr0_en, qphy->dp_tx + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qphy->dp_tx + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qphy->dp_tx2 + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
- writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x18, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
udelay(2000);
- writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x0a, qphy->tx + QSERDES_V5_5NM_TX_TX_POL_INV);
- writel(0x0a, qphy->tx2 + QSERDES_V5_5NM_TX_TX_POL_INV);
+ writel(0x0a, qphy->dp_tx + QSERDES_V5_5NM_TX_TX_POL_INV);
+ writel(0x0a, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TX_POL_INV);
- writel(0x27, qphy->tx + QSERDES_V5_5NM_TX_TX_DRV_LVL);
- writel(0x27, qphy->tx2 + QSERDES_V5_5NM_TX_TX_DRV_LVL);
+ writel(0x27, qphy->dp_tx + QSERDES_V5_5NM_TX_TX_DRV_LVL);
+ writel(0x27, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TX_DRV_LVL);
- writel(0x20, qphy->tx + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
- writel(0x20, qphy->tx2 + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->dp_tx + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
return 0;
}
@@ -1835,7 +1841,7 @@ static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
val = cfg1_settings[qphy->dp_aux_cfg];
- writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(val, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
return 0;
}
@@ -1990,14 +1996,14 @@ static int qmp_combo_dp_power_on(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *tx = qphy->tx;
+ void __iomem *tx = qphy->dp_tx;
qmp_combo_dp_serdes_init(qphy);
qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ qmp_combo_configure_lane(qphy->dp_tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
/* Configure special DP tx tunings */
cfg->configure_dp_tx(qphy);
@@ -2013,7 +2019,7 @@ static int qmp_combo_dp_power_off(struct phy *phy)
struct qmp_phy *qphy = phy_get_drvdata(phy);
/* Assert DP PHY power down */
- writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
return 0;
}
@@ -2589,7 +2595,7 @@ static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int i
return -ENOMEM;
qphy->cfg = cfg;
- qphy->serdes = serdes;
+ qphy->dp_serdes = serdes;
/*
* Get memory resources for each PHY:
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
@@ -2598,18 +2604,18 @@ static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int i
*
* Note that only tx/tx2 and pcs are used by the DP implementation.
*/
- qphy->tx = devm_of_iomap(dev, np, 0, NULL);
- if (IS_ERR(qphy->tx))
- return PTR_ERR(qphy->tx);
+ qphy->dp_tx = devm_of_iomap(dev, np, 0, NULL);
+ if (IS_ERR(qphy->dp_tx))
+ return PTR_ERR(qphy->dp_tx);
- qphy->pcs = devm_of_iomap(dev, np, 2, NULL);
- if (IS_ERR(qphy->pcs))
- return PTR_ERR(qphy->pcs);
+ qphy->dp_pcs = devm_of_iomap(dev, np, 2, NULL);
+ if (IS_ERR(qphy->dp_pcs))
+ return PTR_ERR(qphy->dp_pcs);
if (cfg->lanes >= 2) {
- qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
- if (IS_ERR(qphy->tx2))
- return PTR_ERR(qphy->tx2);
+ qphy->dp_tx2 = devm_of_iomap(dev, np, 3, NULL);
+ if (IS_ERR(qphy->dp_tx2))
+ return PTR_ERR(qphy->dp_tx2);
}
generic_phy = devm_phy_create(dev, np, &qmp_combo_dp_phy_ops);
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 13/22] phy: qcom-qmp-combo: add dedicated DP iomem pointers
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
In preparation for merging the driver data, add separate iomem pointers
for the DP part of the PHY.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 246 +++++++++++-----------
1 file changed, 126 insertions(+), 120 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 52a00b51f09a..bd7b6f72e866 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -895,6 +895,12 @@ struct qmp_phy {
void __iomem *rx2;
void __iomem *pcs_misc;
void __iomem *pcs_usb;
+
+ void __iomem *dp_serdes;
+ void __iomem *dp_tx;
+ void __iomem *dp_tx2;
+ void __iomem *dp_pcs;
+
struct clk *pipe_clk;
struct qcom_qmp *qmp;
enum phy_mode mode;
@@ -1316,7 +1322,7 @@ static void qmp_combo_configure(void __iomem *base,
static int qmp_combo_dp_serdes_init(struct qmp_phy *qphy)
{
const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *serdes = qphy->serdes;
+ void __iomem *serdes = qphy->dp_serdes;
const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
int serdes_tbl_num = cfg->serdes_tbl_num;
@@ -1352,43 +1358,43 @@ static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
- qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
/* Turn on BIAS current for PHY/PLL */
writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
- qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+ qphy->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
- writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_LANE_0_1_PWRDN |
DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
DP_PHY_PD_CTL_DP_CLAMP_EN,
- qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
writel(QSERDES_V3_COM_BIAS_EN |
QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
- qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
-
- writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
- writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
- writel(0x24, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
- writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
- writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
- writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
- writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
- writel(0xbb, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
- writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qphy->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0x24, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xbb, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG9);
qphy->dp_aux_cfg = 0;
writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
PHY_AUX_REQ_ERR_MASK,
- qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
+ qphy->dp_pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
}
static int qmp_combo_configure_dp_swing(struct qmp_phy *qphy,
@@ -1421,10 +1427,10 @@ static int qmp_combo_configure_dp_swing(struct qmp_phy *qphy,
voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
- writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
- writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
- writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
- writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
+ writel(voltage_swing_cfg, qphy->dp_tx + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->dp_tx + emp_post_reg);
+ writel(voltage_swing_cfg, qphy->dp_tx2 + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qphy->dp_tx2 + emp_post_reg);
return 0;
}
@@ -1446,10 +1452,10 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
drvr_en = 0x10;
}
- writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
- writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
- writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
- writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qphy->dp_tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->dp_tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qphy->dp_tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->dp_tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
}
static bool qmp_combo_configure_dp_mode(struct qmp_phy *qphy)
@@ -1472,12 +1478,12 @@ static bool qmp_combo_configure_dp_mode(struct qmp_phy *qphy)
* if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
* val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
* if (orientation == ORIENTATION_CC2)
- * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
+ * writel(0x4c, qphy->dp_pcs + QSERDES_V3_DP_PHY_MODE);
*/
val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
- writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ writel(val, qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
- writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
+ writel(0x5c, qphy->dp_pcs + QSERDES_DP_PHY_MODE);
return reverse;
}
@@ -1491,8 +1497,8 @@ static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
qmp_combo_configure_dp_mode(qphy);
- writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
- writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
+ writel(0x05, qphy->dp_pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->dp_pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
switch (dp_opts->link_rate) {
case 1620:
@@ -1515,40 +1521,40 @@ static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
/* Other link rates aren't supported */
return -EINVAL;
}
- writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
+ writel(phy_vco_div, qphy->dp_pcs + QSERDES_V3_DP_PHY_VCO_DIV);
clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
- writel(0x04, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
- writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
- writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
- writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x04, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
+ writel(0x20, qphy->dp_serdes + QSERDES_V3_COM_RESETSM_CNTRL);
- if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
+ if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V3_COM_C_READY_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V3_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x18, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
udelay(2000);
- writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ return readl_poll_timeout(qphy->dp_pcs + QSERDES_V3_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
@@ -1568,7 +1574,7 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
val = cfg1_settings[qphy->dp_aux_cfg];
- writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(val, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
return 0;
}
@@ -1577,37 +1583,37 @@ static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
- qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
/* Turn on BIAS current for PHY/PLL */
- writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
-
- writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
- writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
- writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
- writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
- writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
- writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
- writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
- writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
- writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
+ writel(0x17, qphy->dp_serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xb7, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG9);
qphy->dp_aux_cfg = 0;
writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
PHY_AUX_REQ_ERR_MASK,
- qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
+ qphy->dp_pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
}
static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
{
/* Program default values before writing proper values */
- writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
- writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
qmp_combo_configure_dp_swing(qphy, QSERDES_V4_TX_TX_DRV_LVL,
QSERDES_V4_TX_TX_EMP_POST1_LVL);
@@ -1620,15 +1626,15 @@ static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_phy *qphy)
u32 phy_vco_div, status;
unsigned long pixel_freq;
- writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
+ writel(0x0f, qphy->dp_pcs + QSERDES_V4_DP_PHY_CFG_1);
qmp_combo_configure_dp_mode(qphy);
- writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
- writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x13, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
- writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
+ writel(0x05, qphy->dp_pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->dp_pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
switch (dp_opts->link_rate) {
case 1620:
@@ -1651,49 +1657,49 @@ static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_phy *qphy)
/* Other link rates aren't supported */
return -EINVAL;
}
- writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
+ writel(phy_vco_div, qphy->dp_pcs + QSERDES_V4_DP_PHY_VCO_DIV);
clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
- writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
- writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
- writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
- writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
+ writel(0x20, qphy->dp_serdes + QSERDES_V4_COM_RESETSM_CNTRL);
- if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
+ if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V4_COM_C_READY_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
+ if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
@@ -1737,30 +1743,30 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
drvr1_en = 0x10;
}
- writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
- writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
- writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
- writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr0_en, qphy->dp_tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qphy->dp_tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qphy->dp_tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qphy->dp_tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
- writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x18, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
udelay(2000);
- writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
- writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qphy->dp_tx + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qphy->dp_tx2 + QSERDES_V4_TX_TX_POL_INV);
- writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qphy->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
- writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
return 0;
}
@@ -1794,30 +1800,30 @@ static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy)
drvr1_en = 0x10;
}
- writel(drvr0_en, qphy->tx + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
- writel(bias0_en, qphy->tx + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
- writel(drvr1_en, qphy->tx2 + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
- writel(bias1_en, qphy->tx2 + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr0_en, qphy->dp_tx + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qphy->dp_tx + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qphy->dp_tx2 + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
- writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x18, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
udelay(2000);
- writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x0a, qphy->tx + QSERDES_V5_5NM_TX_TX_POL_INV);
- writel(0x0a, qphy->tx2 + QSERDES_V5_5NM_TX_TX_POL_INV);
+ writel(0x0a, qphy->dp_tx + QSERDES_V5_5NM_TX_TX_POL_INV);
+ writel(0x0a, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TX_POL_INV);
- writel(0x27, qphy->tx + QSERDES_V5_5NM_TX_TX_DRV_LVL);
- writel(0x27, qphy->tx2 + QSERDES_V5_5NM_TX_TX_DRV_LVL);
+ writel(0x27, qphy->dp_tx + QSERDES_V5_5NM_TX_TX_DRV_LVL);
+ writel(0x27, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TX_DRV_LVL);
- writel(0x20, qphy->tx + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
- writel(0x20, qphy->tx2 + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->dp_tx + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
return 0;
}
@@ -1835,7 +1841,7 @@ static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
val = cfg1_settings[qphy->dp_aux_cfg];
- writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(val, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
return 0;
}
@@ -1990,14 +1996,14 @@ static int qmp_combo_dp_power_on(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *tx = qphy->tx;
+ void __iomem *tx = qphy->dp_tx;
qmp_combo_dp_serdes_init(qphy);
qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ qmp_combo_configure_lane(qphy->dp_tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
/* Configure special DP tx tunings */
cfg->configure_dp_tx(qphy);
@@ -2013,7 +2019,7 @@ static int qmp_combo_dp_power_off(struct phy *phy)
struct qmp_phy *qphy = phy_get_drvdata(phy);
/* Assert DP PHY power down */
- writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
return 0;
}
@@ -2589,7 +2595,7 @@ static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int i
return -ENOMEM;
qphy->cfg = cfg;
- qphy->serdes = serdes;
+ qphy->dp_serdes = serdes;
/*
* Get memory resources for each PHY:
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
@@ -2598,18 +2604,18 @@ static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int i
*
* Note that only tx/tx2 and pcs are used by the DP implementation.
*/
- qphy->tx = devm_of_iomap(dev, np, 0, NULL);
- if (IS_ERR(qphy->tx))
- return PTR_ERR(qphy->tx);
+ qphy->dp_tx = devm_of_iomap(dev, np, 0, NULL);
+ if (IS_ERR(qphy->dp_tx))
+ return PTR_ERR(qphy->dp_tx);
- qphy->pcs = devm_of_iomap(dev, np, 2, NULL);
- if (IS_ERR(qphy->pcs))
- return PTR_ERR(qphy->pcs);
+ qphy->dp_pcs = devm_of_iomap(dev, np, 2, NULL);
+ if (IS_ERR(qphy->dp_pcs))
+ return PTR_ERR(qphy->dp_pcs);
if (cfg->lanes >= 2) {
- qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
- if (IS_ERR(qphy->tx2))
- return PTR_ERR(qphy->tx2);
+ qphy->dp_tx2 = devm_of_iomap(dev, np, 3, NULL);
+ if (IS_ERR(qphy->dp_tx2))
+ return PTR_ERR(qphy->dp_tx2);
}
generic_phy = devm_phy_create(dev, np, &qmp_combo_dp_phy_ops);
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 14/22] phy: qcom-qmp-combo: clean up DP configurations
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
In preparation for merging the USB and DP configurations, align the
initialisations of the DP function pointers.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 40 +++++++++++------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index bd7b6f72e866..c01cedda221c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1049,10 +1049,10 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
@@ -1106,10 +1106,10 @@ static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
@@ -1166,10 +1166,10 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
@@ -1222,10 +1222,10 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v5_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_combo_cfg = {
@@ -1282,10 +1282,10 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 14/22] phy: qcom-qmp-combo: clean up DP configurations
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
In preparation for merging the USB and DP configurations, align the
initialisations of the DP function pointers.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 40 +++++++++++------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index bd7b6f72e866..c01cedda221c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1049,10 +1049,10 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
@@ -1106,10 +1106,10 @@ static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
@@ -1166,10 +1166,10 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
@@ -1222,10 +1222,10 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v5_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_combo_cfg = {
@@ -1282,10 +1282,10 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 15/22] phy: qcom-qmp-combo: rename sc8280xp config
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
In preparation for merging the USB and DP configurations, drop the
"combo" infix from the SC8280XP combined configuration for consistency
with the other platforms.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index c01cedda221c..499368e19e00 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1228,7 +1228,7 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
-static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_combo_cfg = {
+static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_cfg = {
.usb_cfg = &sc8280xp_usb43dp_usb_cfg,
.dp_cfg = &sc8280xp_usb43dp_dp_cfg,
};
@@ -2858,7 +2858,7 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
},
{
.compatible = "qcom,sc8280xp-qmp-usb43dp-phy",
- .data = &sc8280xp_usb43dpphy_combo_cfg,
+ .data = &sc8280xp_usb43dpphy_cfg,
},
{
.compatible = "qcom,sdm845-qmp-usb3-dp-phy",
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 15/22] phy: qcom-qmp-combo: rename sc8280xp config
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
In preparation for merging the USB and DP configurations, drop the
"combo" infix from the SC8280XP combined configuration for consistency
with the other platforms.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index c01cedda221c..499368e19e00 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1228,7 +1228,7 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
-static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_combo_cfg = {
+static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_cfg = {
.usb_cfg = &sc8280xp_usb43dp_usb_cfg,
.dp_cfg = &sc8280xp_usb43dp_dp_cfg,
};
@@ -2858,7 +2858,7 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
},
{
.compatible = "qcom,sc8280xp-qmp-usb43dp-phy",
- .data = &sc8280xp_usb43dpphy_combo_cfg,
+ .data = &sc8280xp_usb43dpphy_cfg,
},
{
.compatible = "qcom,sdm845-qmp-usb3-dp-phy",
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 16/22] phy: qcom-qmp-combo: add DP configuration tables
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
In preparation for merging the USB and DP configurations, add dedicated
pointers for the DP serdes and tx tables to the configurations.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 45 ++++++++++++-----------
1 file changed, 24 insertions(+), 21 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 499368e19e00..b27d1821116c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -816,6 +816,11 @@ struct qmp_phy_cfg {
const struct qmp_phy_init_tbl *pcs_usb_tbl;
int pcs_usb_tbl_num;
+ const struct qmp_phy_init_tbl *dp_serdes_tbl;
+ int dp_serdes_tbl_num;
+ const struct qmp_phy_init_tbl *dp_tx_tbl;
+ int dp_tx_tbl_num;
+
/* Init sequence for DP PHY block link rates */
const struct qmp_phy_init_tbl *serdes_tbl_rbr;
int serdes_tbl_rbr_num;
@@ -1030,10 +1035,10 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.type = PHY_TYPE_DP,
.lanes = 2,
- .serdes_tbl = qmp_v3_dp_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
- .tx_tbl = qmp_v3_dp_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+ .dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v3_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
.serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
@@ -1147,10 +1152,10 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.type = PHY_TYPE_DP,
.lanes = 2,
- .serdes_tbl = qmp_v4_dp_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
- .tx_tbl = qmp_v4_dp_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+ .dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v4_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
.serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
@@ -1203,10 +1208,10 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.type = PHY_TYPE_DP,
.lanes = 2,
- .serdes_tbl = qmp_v5_dp_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(qmp_v5_dp_serdes_tbl),
- .tx_tbl = qmp_v5_5nm_dp_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(qmp_v5_5nm_dp_tx_tbl),
+ .dp_serdes_tbl = qmp_v5_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v5_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v5_5nm_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v5_5nm_dp_tx_tbl),
.serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
@@ -1263,10 +1268,10 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.type = PHY_TYPE_DP,
.lanes = 2,
- .serdes_tbl = qmp_v4_dp_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
- .tx_tbl = qmp_v4_dp_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+ .dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v4_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
.serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
@@ -1324,10 +1329,8 @@ static int qmp_combo_dp_serdes_init(struct qmp_phy *qphy)
const struct qmp_phy_cfg *cfg = qphy->cfg;
void __iomem *serdes = qphy->dp_serdes;
const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
- const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
- int serdes_tbl_num = cfg->serdes_tbl_num;
- qmp_combo_configure(serdes, serdes_tbl, serdes_tbl_num);
+ qmp_combo_configure(serdes, cfg->dp_serdes_tbl, cfg->dp_serdes_tbl_num);
switch (dp_opts->link_rate) {
case 1620:
@@ -2000,10 +2003,10 @@ static int qmp_combo_dp_power_on(struct phy *phy)
qmp_combo_dp_serdes_init(qphy);
- qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
+ qmp_combo_configure_lane(tx, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 1);
if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->dp_tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ qmp_combo_configure_lane(qphy->dp_tx2, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 2);
/* Configure special DP tx tunings */
cfg->configure_dp_tx(qphy);
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 16/22] phy: qcom-qmp-combo: add DP configuration tables
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
In preparation for merging the USB and DP configurations, add dedicated
pointers for the DP serdes and tx tables to the configurations.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 45 ++++++++++++-----------
1 file changed, 24 insertions(+), 21 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 499368e19e00..b27d1821116c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -816,6 +816,11 @@ struct qmp_phy_cfg {
const struct qmp_phy_init_tbl *pcs_usb_tbl;
int pcs_usb_tbl_num;
+ const struct qmp_phy_init_tbl *dp_serdes_tbl;
+ int dp_serdes_tbl_num;
+ const struct qmp_phy_init_tbl *dp_tx_tbl;
+ int dp_tx_tbl_num;
+
/* Init sequence for DP PHY block link rates */
const struct qmp_phy_init_tbl *serdes_tbl_rbr;
int serdes_tbl_rbr_num;
@@ -1030,10 +1035,10 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.type = PHY_TYPE_DP,
.lanes = 2,
- .serdes_tbl = qmp_v3_dp_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
- .tx_tbl = qmp_v3_dp_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+ .dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v3_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
.serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
@@ -1147,10 +1152,10 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.type = PHY_TYPE_DP,
.lanes = 2,
- .serdes_tbl = qmp_v4_dp_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
- .tx_tbl = qmp_v4_dp_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+ .dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v4_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
.serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
@@ -1203,10 +1208,10 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.type = PHY_TYPE_DP,
.lanes = 2,
- .serdes_tbl = qmp_v5_dp_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(qmp_v5_dp_serdes_tbl),
- .tx_tbl = qmp_v5_5nm_dp_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(qmp_v5_5nm_dp_tx_tbl),
+ .dp_serdes_tbl = qmp_v5_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v5_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v5_5nm_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v5_5nm_dp_tx_tbl),
.serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
@@ -1263,10 +1268,10 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.type = PHY_TYPE_DP,
.lanes = 2,
- .serdes_tbl = qmp_v4_dp_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
- .tx_tbl = qmp_v4_dp_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+ .dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v4_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v4_dp_tx_tbl),
.serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
@@ -1324,10 +1329,8 @@ static int qmp_combo_dp_serdes_init(struct qmp_phy *qphy)
const struct qmp_phy_cfg *cfg = qphy->cfg;
void __iomem *serdes = qphy->dp_serdes;
const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
- const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
- int serdes_tbl_num = cfg->serdes_tbl_num;
- qmp_combo_configure(serdes, serdes_tbl, serdes_tbl_num);
+ qmp_combo_configure(serdes, cfg->dp_serdes_tbl, cfg->dp_serdes_tbl_num);
switch (dp_opts->link_rate) {
case 1620:
@@ -2000,10 +2003,10 @@ static int qmp_combo_dp_power_on(struct phy *phy)
qmp_combo_dp_serdes_init(qphy);
- qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
+ qmp_combo_configure_lane(tx, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 1);
if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->dp_tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ qmp_combo_configure_lane(qphy->dp_tx2, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 2);
/* Configure special DP tx tunings */
cfg->configure_dp_tx(qphy);
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
It does not really make any sense to keep separate configuration
structures for the USB and DP parts of the same PHY so merge them.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++---------------
1 file changed, 57 insertions(+), 125 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index b27d1821116c..249912b75964 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -798,10 +798,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
struct qmp_phy;
-/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
- /* phy-type - PCIE/UFS/USB */
- unsigned int type;
int lanes;
/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
@@ -864,11 +861,6 @@ struct qmp_phy_cfg {
};
-struct qmp_phy_combo_cfg {
- const struct qmp_phy_cfg *usb_cfg;
- const struct qmp_phy_cfg *dp_cfg;
-};
-
/**
* struct qmp_phy - per-lane phy descriptor
*
@@ -1008,8 +1000,7 @@ static const char * const sc7180_usb3phy_reset_l[] = {
"phy",
};
-static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
- .type = PHY_TYPE_USB3,
+static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
.lanes = 2,
.serdes_tbl = qmp_v3_usb3_serdes_tbl,
@@ -1020,20 +1011,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
.rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
.pcs_tbl = qmp_v3_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
- .clk_list = qmp_v3_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
- .reset_list = sc7180_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v3_usb3phy_regs_layout,
-
- .has_pwrdn_delay = true,
-};
-
-static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
- .type = PHY_TYPE_DP,
- .lanes = 2,
.dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
@@ -1058,15 +1035,19 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
- .usb_cfg = &sc7180_usb3phy_cfg,
- .dp_cfg = &sc7180_dpphy_cfg,
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_pwrdn_delay = true,
};
-static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
- .type = PHY_TYPE_USB3,
+static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = {
.lanes = 2,
.serdes_tbl = qmp_v3_usb3_serdes_tbl,
@@ -1077,25 +1058,11 @@ static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
.rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
.pcs_tbl = qmp_v3_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
- .clk_list = qmp_v3_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v3_usb3phy_regs_layout,
-
- .has_pwrdn_delay = true,
-};
-static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
- .type = PHY_TYPE_DP,
- .lanes = 2,
-
- .serdes_tbl = qmp_v3_dp_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
- .tx_tbl = qmp_v3_dp_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+ .dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v3_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
.serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
@@ -1115,15 +1082,18 @@ static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
.configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
- .usb_cfg = &sdm845_usb3phy_cfg,
- .dp_cfg = &sdm845_dpphy_cfg,
-};
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
-static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
- .type = PHY_TYPE_USB3,
+ .has_pwrdn_delay = true,
+};
+static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
.lanes = 2,
.serdes_tbl = sm8150_usb3_serdes_tbl,
@@ -1136,21 +1106,6 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
.pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
.pcs_usb_tbl = sm8150_usb3_pcs_usb_tbl,
.pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl),
- .clk_list = qmp_v4_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3phy_regs_layout,
- .pcs_usb_offset = 0x300,
-
- .has_pwrdn_delay = true,
-};
-
-static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
- .type = PHY_TYPE_DP,
- .lanes = 2,
.dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
@@ -1175,15 +1130,20 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
- .usb_cfg = &sm8150_usb3phy_cfg,
- .dp_cfg = &sc8180x_dpphy_cfg,
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
+
+ .has_pwrdn_delay = true,
};
-static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
- .type = PHY_TYPE_USB3,
+static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
.lanes = 2,
.serdes_tbl = sc8280xp_usb43dp_serdes_tbl,
@@ -1194,19 +1154,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
.rx_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_rx_tbl),
.pcs_tbl = sc8280xp_usb43dp_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_pcs_tbl),
- .clk_list = qmp_v4_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3phy_regs_layout,
- .pcs_usb_offset = 0x300,
-};
-
-static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
- .type = PHY_TYPE_DP,
- .lanes = 2,
.dp_serdes_tbl = qmp_v5_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v5_dp_serdes_tbl),
@@ -1231,15 +1178,18 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_cfg = {
- .usb_cfg = &sc8280xp_usb43dp_usb_cfg,
- .dp_cfg = &sc8280xp_usb43dp_dp_cfg,
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
};
-static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
- .type = PHY_TYPE_USB3,
+static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
.lanes = 2,
.serdes_tbl = sm8150_usb3_serdes_tbl,
@@ -1252,21 +1202,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
.pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
.pcs_usb_tbl = sm8250_usb3_pcs_usb_tbl,
.pcs_usb_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_usb_tbl),
- .clk_list = qmp_v4_sm8250_usbphy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3phy_regs_layout,
- .pcs_usb_offset = 0x300,
-
- .has_pwrdn_delay = true,
-};
-
-static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
- .type = PHY_TYPE_DP,
- .lanes = 2,
.dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
@@ -1291,11 +1226,17 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
- .usb_cfg = &sm8250_usb3phy_cfg,
- .dp_cfg = &sm8250_dpphy_cfg,
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
+
+ .has_pwrdn_delay = true,
};
static void qmp_combo_configure_lane(void __iomem *base,
@@ -2720,10 +2661,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
void __iomem *serdes;
void __iomem *usb_serdes;
void __iomem *dp_serdes = NULL;
- const struct qmp_phy_combo_cfg *combo_cfg = NULL;
const struct qmp_phy_cfg *cfg = NULL;
- const struct qmp_phy_cfg *usb_cfg = NULL;
- const struct qmp_phy_cfg *dp_cfg = NULL;
int num, id, expected_phys;
int ret;
@@ -2734,13 +2672,10 @@ static int qmp_combo_probe(struct platform_device *pdev)
qmp->dev = dev;
dev_set_drvdata(dev, qmp);
- combo_cfg = of_device_get_match_data(dev);
- if (!combo_cfg)
+ cfg = of_device_get_match_data(dev);
+ if (!cfg)
return -EINVAL;
- usb_cfg = combo_cfg->usb_cfg;
- cfg = usb_cfg; /* Setup clks and regulators */
-
usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(serdes))
return PTR_ERR(serdes);
@@ -2753,7 +2688,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (IS_ERR(dp_serdes))
return PTR_ERR(dp_serdes);
- dp_cfg = combo_cfg->dp_cfg;
expected_phys = 2;
mutex_init(&qmp->phy_mutex);
@@ -2792,7 +2726,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
id = 0;
for_each_available_child_of_node(dev->of_node, child) {
if (of_node_name_eq(child, "dp-phy")) {
- cfg = dp_cfg;
serdes = dp_serdes;
/* Create per-lane phy */
@@ -2810,7 +2743,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
goto err_node_put;
}
} else if (of_node_name_eq(child, "usb3-phy")) {
- cfg = usb_cfg;
serdes = usb_serdes;
/* Create per-lane phy */
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
It does not really make any sense to keep separate configuration
structures for the USB and DP parts of the same PHY so merge them.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++---------------
1 file changed, 57 insertions(+), 125 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index b27d1821116c..249912b75964 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -798,10 +798,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
struct qmp_phy;
-/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
- /* phy-type - PCIE/UFS/USB */
- unsigned int type;
int lanes;
/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
@@ -864,11 +861,6 @@ struct qmp_phy_cfg {
};
-struct qmp_phy_combo_cfg {
- const struct qmp_phy_cfg *usb_cfg;
- const struct qmp_phy_cfg *dp_cfg;
-};
-
/**
* struct qmp_phy - per-lane phy descriptor
*
@@ -1008,8 +1000,7 @@ static const char * const sc7180_usb3phy_reset_l[] = {
"phy",
};
-static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
- .type = PHY_TYPE_USB3,
+static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
.lanes = 2,
.serdes_tbl = qmp_v3_usb3_serdes_tbl,
@@ -1020,20 +1011,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
.rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
.pcs_tbl = qmp_v3_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
- .clk_list = qmp_v3_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
- .reset_list = sc7180_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v3_usb3phy_regs_layout,
-
- .has_pwrdn_delay = true,
-};
-
-static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
- .type = PHY_TYPE_DP,
- .lanes = 2,
.dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
@@ -1058,15 +1035,19 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
- .usb_cfg = &sc7180_usb3phy_cfg,
- .dp_cfg = &sc7180_dpphy_cfg,
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_pwrdn_delay = true,
};
-static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
- .type = PHY_TYPE_USB3,
+static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = {
.lanes = 2,
.serdes_tbl = qmp_v3_usb3_serdes_tbl,
@@ -1077,25 +1058,11 @@ static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
.rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
.pcs_tbl = qmp_v3_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
- .clk_list = qmp_v3_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v3_usb3phy_regs_layout,
-
- .has_pwrdn_delay = true,
-};
-static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
- .type = PHY_TYPE_DP,
- .lanes = 2,
-
- .serdes_tbl = qmp_v3_dp_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
- .tx_tbl = qmp_v3_dp_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+ .dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v3_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
.serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
@@ -1115,15 +1082,18 @@ static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
.configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
- .usb_cfg = &sdm845_usb3phy_cfg,
- .dp_cfg = &sdm845_dpphy_cfg,
-};
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
-static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
- .type = PHY_TYPE_USB3,
+ .has_pwrdn_delay = true,
+};
+static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
.lanes = 2,
.serdes_tbl = sm8150_usb3_serdes_tbl,
@@ -1136,21 +1106,6 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
.pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
.pcs_usb_tbl = sm8150_usb3_pcs_usb_tbl,
.pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl),
- .clk_list = qmp_v4_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3phy_regs_layout,
- .pcs_usb_offset = 0x300,
-
- .has_pwrdn_delay = true,
-};
-
-static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
- .type = PHY_TYPE_DP,
- .lanes = 2,
.dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
@@ -1175,15 +1130,20 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
- .usb_cfg = &sm8150_usb3phy_cfg,
- .dp_cfg = &sc8180x_dpphy_cfg,
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
+
+ .has_pwrdn_delay = true,
};
-static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
- .type = PHY_TYPE_USB3,
+static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
.lanes = 2,
.serdes_tbl = sc8280xp_usb43dp_serdes_tbl,
@@ -1194,19 +1154,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
.rx_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_rx_tbl),
.pcs_tbl = sc8280xp_usb43dp_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_pcs_tbl),
- .clk_list = qmp_v4_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3phy_regs_layout,
- .pcs_usb_offset = 0x300,
-};
-
-static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
- .type = PHY_TYPE_DP,
- .lanes = 2,
.dp_serdes_tbl = qmp_v5_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v5_dp_serdes_tbl),
@@ -1231,15 +1178,18 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_cfg = {
- .usb_cfg = &sc8280xp_usb43dp_usb_cfg,
- .dp_cfg = &sc8280xp_usb43dp_dp_cfg,
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
};
-static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
- .type = PHY_TYPE_USB3,
+static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
.lanes = 2,
.serdes_tbl = sm8150_usb3_serdes_tbl,
@@ -1252,21 +1202,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
.pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
.pcs_usb_tbl = sm8250_usb3_pcs_usb_tbl,
.pcs_usb_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_usb_tbl),
- .clk_list = qmp_v4_sm8250_usbphy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3phy_regs_layout,
- .pcs_usb_offset = 0x300,
-
- .has_pwrdn_delay = true,
-};
-
-static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
- .type = PHY_TYPE_DP,
- .lanes = 2,
.dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
@@ -1291,11 +1226,17 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
- .usb_cfg = &sm8250_usb3phy_cfg,
- .dp_cfg = &sm8250_dpphy_cfg,
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
+
+ .has_pwrdn_delay = true,
};
static void qmp_combo_configure_lane(void __iomem *base,
@@ -2720,10 +2661,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
void __iomem *serdes;
void __iomem *usb_serdes;
void __iomem *dp_serdes = NULL;
- const struct qmp_phy_combo_cfg *combo_cfg = NULL;
const struct qmp_phy_cfg *cfg = NULL;
- const struct qmp_phy_cfg *usb_cfg = NULL;
- const struct qmp_phy_cfg *dp_cfg = NULL;
int num, id, expected_phys;
int ret;
@@ -2734,13 +2672,10 @@ static int qmp_combo_probe(struct platform_device *pdev)
qmp->dev = dev;
dev_set_drvdata(dev, qmp);
- combo_cfg = of_device_get_match_data(dev);
- if (!combo_cfg)
+ cfg = of_device_get_match_data(dev);
+ if (!cfg)
return -EINVAL;
- usb_cfg = combo_cfg->usb_cfg;
- cfg = usb_cfg; /* Setup clks and regulators */
-
usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(serdes))
return PTR_ERR(serdes);
@@ -2753,7 +2688,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (IS_ERR(dp_serdes))
return PTR_ERR(dp_serdes);
- dp_cfg = combo_cfg->dp_cfg;
expected_phys = 2;
mutex_init(&qmp->phy_mutex);
@@ -2792,7 +2726,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
id = 0;
for_each_available_child_of_node(dev->of_node, child) {
if (of_node_name_eq(child, "dp-phy")) {
- cfg = dp_cfg;
serdes = dp_serdes;
/* Create per-lane phy */
@@ -2810,7 +2743,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
goto err_node_put;
}
} else if (of_node_name_eq(child, "usb3-phy")) {
- cfg = usb_cfg;
serdes = usb_serdes;
/* Create per-lane phy */
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 18/22] phy: qcom-qmp-combo: merge driver data
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
The QMP combo driver manages a single PHY (even if it provides two
interfaces for USB and DP, respectively) so merge the old qcom_qmp and
qmp_phy structures and drop the PHY array.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 690 ++++++++++------------
1 file changed, 313 insertions(+), 377 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 249912b75964..43b7ea5d2edc 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -796,7 +796,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
{ 0x3f, 0xff, 0xff, 0xff }
};
-struct qmp_phy;
+struct qmp_combo;
struct qmp_phy_cfg {
int lanes;
@@ -835,10 +835,10 @@ struct qmp_phy_cfg {
const u8 (*pre_emphasis_hbr3_hbr2)[4][4];
/* DP PHY callbacks */
- int (*configure_dp_phy)(struct qmp_phy *qphy);
- void (*configure_dp_tx)(struct qmp_phy *qphy);
- int (*calibrate_dp_phy)(struct qmp_phy *qphy);
- void (*dp_aux_init)(struct qmp_phy *qphy);
+ int (*configure_dp_phy)(struct qmp_combo *qmp);
+ void (*configure_dp_tx)(struct qmp_combo *qmp);
+ int (*calibrate_dp_phy)(struct qmp_combo *qmp);
+ void (*dp_aux_init)(struct qmp_combo *qmp);
/* clock ids to be requested */
const char * const *clk_list;
@@ -861,29 +861,19 @@ struct qmp_phy_cfg {
};
-/**
- * struct qmp_phy - per-lane phy descriptor
- *
- * @phy: generic phy
- * @cfg: phy specific configuration
- * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
- * @tx: iomapped memory space for lane's tx
- * @rx: iomapped memory space for lane's rx
- * @pcs: iomapped memory space for lane's pcs
- * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
- * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
- * @pcs_misc: iomapped memory space for lane's pcs_misc
- * @pcs_usb: iomapped memory space for lane's pcs_usb
- * @pipe_clk: pipe clock
- * @qmp: QMP phy to which this lane belongs
- * @mode: current PHY mode
- * @dp_aux_cfg: Display port aux config
- * @dp_opts: Display port optional config
- * @dp_clks: Display port clocks
- */
-struct qmp_phy {
- struct phy *phy;
+struct qmp_phy_dp_clks {
+ struct qmp_combo *qmp;
+ struct clk_hw dp_link_hw;
+ struct clk_hw dp_pixel_hw;
+};
+
+struct qmp_combo {
+ struct device *dev;
+
const struct qmp_phy_cfg *cfg;
+
+ void __iomem *dp_com;
+
void __iomem *serdes;
void __iomem *tx;
void __iomem *rx;
@@ -899,59 +889,33 @@ struct qmp_phy {
void __iomem *dp_pcs;
struct clk *pipe_clk;
- struct qcom_qmp *qmp;
- enum phy_mode mode;
- unsigned int dp_aux_cfg;
- struct phy_configure_opts_dp dp_opts;
- struct qmp_phy_dp_clks *dp_clks;
-};
-
-struct qmp_phy_dp_clks {
- struct qmp_phy *qphy;
- struct clk_hw dp_link_hw;
- struct clk_hw dp_pixel_hw;
-};
-
-/**
- * struct qcom_qmp - structure holding QMP phy block attributes
- *
- * @dev: device
- * @dp_com: iomapped memory space for phy's dp_com control block
- *
- * @clks: array of clocks required by phy
- * @resets: array of resets required by phy
- * @vregs: regulator supplies bulk data
- *
- * @phys: array of per-lane phy descriptors
- * @phy_mutex: mutex lock for PHY common block initialization
- * @init_count: phy common block initialization count
- */
-struct qcom_qmp {
- struct device *dev;
- void __iomem *dp_com;
-
struct clk_bulk_data *clks;
struct reset_control_bulk_data *resets;
struct regulator_bulk_data *vregs;
- struct qmp_phy **phys;
- struct qmp_phy *usb_phy;
-
struct mutex phy_mutex;
int init_count;
+
+ struct phy *usb_phy;
+ enum phy_mode mode;
+
+ struct phy *dp_phy;
+ unsigned int dp_aux_cfg;
+ struct phy_configure_opts_dp dp_opts;
+ struct qmp_phy_dp_clks *dp_clks;
};
-static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
-static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
-static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
-static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp);
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp);
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp);
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp);
-static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
-static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
-static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
-static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp);
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp);
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp);
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp);
-static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp);
static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
{
@@ -1265,11 +1229,11 @@ static void qmp_combo_configure(void __iomem *base,
qmp_combo_configure_lane(base, tbl, num, 0xff);
}
-static int qmp_combo_dp_serdes_init(struct qmp_phy *qphy)
+static int qmp_combo_dp_serdes_init(struct qmp_combo *qmp)
{
- const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *serdes = qphy->dp_serdes;
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ void __iomem *serdes = qmp->dp_serdes;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
qmp_combo_configure(serdes, cfg->dp_serdes_tbl, cfg->dp_serdes_tbl_num);
@@ -1298,54 +1262,54 @@ static int qmp_combo_dp_serdes_init(struct qmp_phy *qphy)
return 0;
}
-static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
- qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
+ qmp->dp_pcs + QSERDES_DP_PHY_PD_CTL);
/* Turn on BIAS current for PHY/PLL */
writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
- qphy->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+ qmp->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
- writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qmp->dp_pcs + QSERDES_DP_PHY_PD_CTL);
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_LANE_0_1_PWRDN |
DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
DP_PHY_PD_CTL_DP_CLAMP_EN,
- qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
+ qmp->dp_pcs + QSERDES_DP_PHY_PD_CTL);
writel(QSERDES_V3_COM_BIAS_EN |
QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
- qphy->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
-
- writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG0);
- writel(0x13, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
- writel(0x24, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG3);
- writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG4);
- writel(0x26, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG5);
- writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG6);
- writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG7);
- writel(0xbb, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG8);
- writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG9);
- qphy->dp_aux_cfg = 0;
+ qmp->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0x24, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xbb, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qmp->dp_aux_cfg = 0;
writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
PHY_AUX_REQ_ERR_MASK,
- qphy->dp_pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
+ qmp->dp_pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
}
-static int qmp_combo_configure_dp_swing(struct qmp_phy *qphy,
+static int qmp_combo_configure_dp_swing(struct qmp_combo *qmp,
unsigned int drv_lvl_reg, unsigned int emp_post_reg)
{
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
unsigned int v_level = 0, p_level = 0;
u8 voltage_swing_cfg, pre_emphasis_cfg;
int i;
@@ -1371,20 +1335,20 @@ static int qmp_combo_configure_dp_swing(struct qmp_phy *qphy,
voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
- writel(voltage_swing_cfg, qphy->dp_tx + drv_lvl_reg);
- writel(pre_emphasis_cfg, qphy->dp_tx + emp_post_reg);
- writel(voltage_swing_cfg, qphy->dp_tx2 + drv_lvl_reg);
- writel(pre_emphasis_cfg, qphy->dp_tx2 + emp_post_reg);
+ writel(voltage_swing_cfg, qmp->dp_tx + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qmp->dp_tx + emp_post_reg);
+ writel(voltage_swing_cfg, qmp->dp_tx2 + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qmp->dp_tx2 + emp_post_reg);
return 0;
}
-static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp)
{
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 bias_en, drvr_en;
- if (qmp_combo_configure_dp_swing(qphy, QSERDES_V3_TX_TX_DRV_LVL,
+ if (qmp_combo_configure_dp_swing(qmp, QSERDES_V3_TX_TX_DRV_LVL,
QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
return;
@@ -1396,13 +1360,13 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
drvr_en = 0x10;
}
- writel(drvr_en, qphy->dp_tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
- writel(bias_en, qphy->dp_tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
- writel(drvr_en, qphy->dp_tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
- writel(bias_en, qphy->dp_tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qmp->dp_tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qmp->dp_tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qmp->dp_tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qmp->dp_tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
}
-static bool qmp_combo_configure_dp_mode(struct qmp_phy *qphy)
+static bool qmp_combo_configure_dp_mode(struct qmp_combo *qmp)
{
u32 val;
bool reverse = false;
@@ -1422,27 +1386,27 @@ static bool qmp_combo_configure_dp_mode(struct qmp_phy *qphy)
* if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
* val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
* if (orientation == ORIENTATION_CC2)
- * writel(0x4c, qphy->dp_pcs + QSERDES_V3_DP_PHY_MODE);
+ * writel(0x4c, qmp->dp_pcs + QSERDES_V3_DP_PHY_MODE);
*/
val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
- writel(val, qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
+ writel(val, qmp->dp_pcs + QSERDES_DP_PHY_PD_CTL);
- writel(0x5c, qphy->dp_pcs + QSERDES_DP_PHY_MODE);
+ writel(0x5c, qmp->dp_pcs + QSERDES_DP_PHY_MODE);
return reverse;
}
-static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp)
{
- const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct qmp_phy_dp_clks *dp_clks = qmp->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 phy_vco_div, status;
unsigned long pixel_freq;
- qmp_combo_configure_dp_mode(qphy);
+ qmp_combo_configure_dp_mode(qmp);
- writel(0x05, qphy->dp_pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
- writel(0x05, qphy->dp_pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
+ writel(0x05, qmp->dp_pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qmp->dp_pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
switch (dp_opts->link_rate) {
case 1620:
@@ -1465,40 +1429,40 @@ static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
/* Other link rates aren't supported */
return -EINVAL;
}
- writel(phy_vco_div, qphy->dp_pcs + QSERDES_V3_DP_PHY_VCO_DIV);
+ writel(phy_vco_div, qmp->dp_pcs + QSERDES_V3_DP_PHY_VCO_DIV);
clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
- writel(0x04, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x05, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x09, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x04, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x01, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x20, qphy->dp_serdes + QSERDES_V3_COM_RESETSM_CNTRL);
+ writel(0x20, qmp->dp_serdes + QSERDES_V3_COM_RESETSM_CNTRL);
- if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V3_COM_C_READY_STATUS,
+ if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V3_COM_C_READY_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V3_DP_PHY_STATUS,
+ if (readl_poll_timeout(qmp->dp_pcs + QSERDES_V3_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x18, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x18, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
udelay(2000);
- writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- return readl_poll_timeout(qphy->dp_pcs + QSERDES_V3_DP_PHY_STATUS,
+ return readl_poll_timeout(qmp->dp_pcs + QSERDES_V3_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
@@ -1509,76 +1473,76 @@ static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
* We need to calibrate the aux setting here as many times
* as the caller tries
*/
-static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp)
{
static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
u8 val;
- qphy->dp_aux_cfg++;
- qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
- val = cfg1_settings[qphy->dp_aux_cfg];
+ qmp->dp_aux_cfg++;
+ qmp->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qmp->dp_aux_cfg];
- writel(val, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(val, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
return 0;
}
-static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
- qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
+ qmp->dp_pcs + QSERDES_DP_PHY_PD_CTL);
/* Turn on BIAS current for PHY/PLL */
- writel(0x17, qphy->dp_serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
-
- writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG0);
- writel(0x13, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
- writel(0xa4, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG3);
- writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG4);
- writel(0x26, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG5);
- writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG6);
- writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG7);
- writel(0xb7, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG8);
- writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG9);
- qphy->dp_aux_cfg = 0;
+ writel(0x17, qmp->dp_serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xb7, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qmp->dp_aux_cfg = 0;
writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
PHY_AUX_REQ_ERR_MASK,
- qphy->dp_pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
+ qmp->dp_pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
}
-static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp)
{
/* Program default values before writing proper values */
- writel(0x27, qphy->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x27, qphy->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qmp->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qmp->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x20, qphy->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
- writel(0x20, qphy->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qmp->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qmp->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
- qmp_combo_configure_dp_swing(qphy, QSERDES_V4_TX_TX_DRV_LVL,
+ qmp_combo_configure_dp_swing(qmp, QSERDES_V4_TX_TX_DRV_LVL,
QSERDES_V4_TX_TX_EMP_POST1_LVL);
}
-static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_phy *qphy)
+static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_combo *qmp)
{
- const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct qmp_phy_dp_clks *dp_clks = qmp->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 phy_vco_div, status;
unsigned long pixel_freq;
- writel(0x0f, qphy->dp_pcs + QSERDES_V4_DP_PHY_CFG_1);
+ writel(0x0f, qmp->dp_pcs + QSERDES_V4_DP_PHY_CFG_1);
- qmp_combo_configure_dp_mode(qphy);
+ qmp_combo_configure_dp_mode(qmp);
- writel(0x13, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
- writel(0xa4, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x13, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x05, qphy->dp_pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
- writel(0x05, qphy->dp_pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
+ writel(0x05, qmp->dp_pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qmp->dp_pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
switch (dp_opts->link_rate) {
case 1620:
@@ -1601,49 +1565,49 @@ static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_phy *qphy)
/* Other link rates aren't supported */
return -EINVAL;
}
- writel(phy_vco_div, qphy->dp_pcs + QSERDES_V4_DP_PHY_VCO_DIV);
+ writel(phy_vco_div, qmp->dp_pcs + QSERDES_V4_DP_PHY_VCO_DIV);
clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
- writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x05, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x09, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x20, qphy->dp_serdes + QSERDES_V4_COM_RESETSM_CNTRL);
+ writel(0x20, qmp->dp_serdes + QSERDES_V4_COM_RESETSM_CNTRL);
- if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V4_COM_C_READY_STATUS,
+ if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_C_READY_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
+ if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
+ if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qmp->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qmp->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
@@ -1653,15 +1617,15 @@ static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_phy *qphy)
return 0;
}
-static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp)
{
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
bool reverse = false;
u32 status;
int ret;
- ret = qcom_qmp_v45_phy_configure_dp_phy(qphy);
+ ret = qcom_qmp_v45_phy_configure_dp_phy(qmp);
if (ret < 0)
return ret;
@@ -1687,43 +1651,43 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
drvr1_en = 0x10;
}
- writel(drvr0_en, qphy->dp_tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
- writel(bias0_en, qphy->dp_tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
- writel(drvr1_en, qphy->dp_tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
- writel(bias1_en, qphy->dp_tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr0_en, qmp->dp_tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qmp->dp_tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qmp->dp_tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qmp->dp_tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
- writel(0x18, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x18, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
udelay(2000);
- writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qmp->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x0a, qphy->dp_tx + QSERDES_V4_TX_TX_POL_INV);
- writel(0x0a, qphy->dp_tx2 + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qmp->dp_tx + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qmp->dp_tx2 + QSERDES_V4_TX_TX_POL_INV);
- writel(0x27, qphy->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x27, qphy->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qmp->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qmp->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x20, qphy->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
- writel(0x20, qphy->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qmp->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qmp->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
return 0;
}
-static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy)
+static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp)
{
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
bool reverse = false;
u32 status;
int ret;
- ret = qcom_qmp_v45_phy_configure_dp_phy(qphy);
+ ret = qcom_qmp_v45_phy_configure_dp_phy(qmp);
if (ret < 0)
return ret;
@@ -1744,30 +1708,30 @@ static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy)
drvr1_en = 0x10;
}
- writel(drvr0_en, qphy->dp_tx + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
- writel(bias0_en, qphy->dp_tx + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
- writel(drvr1_en, qphy->dp_tx2 + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
- writel(bias1_en, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr0_en, qmp->dp_tx + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qmp->dp_tx + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qmp->dp_tx2 + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qmp->dp_tx2 + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
- writel(0x18, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x18, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
udelay(2000);
- writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qmp->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x0a, qphy->dp_tx + QSERDES_V5_5NM_TX_TX_POL_INV);
- writel(0x0a, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TX_POL_INV);
+ writel(0x0a, qmp->dp_tx + QSERDES_V5_5NM_TX_TX_POL_INV);
+ writel(0x0a, qmp->dp_tx2 + QSERDES_V5_5NM_TX_TX_POL_INV);
- writel(0x27, qphy->dp_tx + QSERDES_V5_5NM_TX_TX_DRV_LVL);
- writel(0x27, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TX_DRV_LVL);
+ writel(0x27, qmp->dp_tx + QSERDES_V5_5NM_TX_TX_DRV_LVL);
+ writel(0x27, qmp->dp_tx2 + QSERDES_V5_5NM_TX_TX_DRV_LVL);
- writel(0x20, qphy->dp_tx + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
- writel(0x20, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qmp->dp_tx + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qmp->dp_tx2 + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
return 0;
}
@@ -1776,16 +1740,16 @@ static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy)
* We need to calibrate the aux setting here as many times
* as the caller tries
*/
-static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp)
{
static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
u8 val;
- qphy->dp_aux_cfg++;
- qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
- val = cfg1_settings[qphy->dp_aux_cfg];
+ qmp->dp_aux_cfg++;
+ qmp->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qmp->dp_aux_cfg];
- writel(val, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(val, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
return 0;
}
@@ -1793,13 +1757,13 @@ static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
static int qmp_combo_dp_configure(struct phy *phy, union phy_configure_opts *opts)
{
const struct phy_configure_opts_dp *dp_opts = &opts->dp;
- struct qmp_phy *qphy = phy_get_drvdata(phy);
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
- memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
- if (qphy->dp_opts.set_voltages) {
- cfg->configure_dp_tx(qphy);
- qphy->dp_opts.set_voltages = 0;
+ memcpy(&qmp->dp_opts, dp_opts, sizeof(*dp_opts));
+ if (qmp->dp_opts.set_voltages) {
+ cfg->configure_dp_tx(qmp);
+ qmp->dp_opts.set_voltages = 0;
}
return 0;
@@ -1807,20 +1771,18 @@ static int qmp_combo_dp_configure(struct phy *phy, union phy_configure_opts *opt
static int qmp_combo_dp_calibrate(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
if (cfg->calibrate_dp_phy)
- return cfg->calibrate_dp_phy(qphy);
+ return cfg->calibrate_dp_phy(qmp);
return 0;
}
-static int qmp_combo_com_init(struct qmp_phy *qphy)
+static int qmp_combo_com_init(struct qmp_combo *qmp)
{
- struct qcom_qmp *qmp = qphy->qmp;
- struct qmp_phy *usb_phy = qmp->usb_phy;
- const struct qmp_phy_cfg *cfg = usb_phy->cfg;
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
void __iomem *dp_com = qmp->dp_com;
int ret;
@@ -1872,7 +1834,7 @@ static int qmp_combo_com_init(struct qmp_phy *qphy)
qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
- qphy_setbits(usb_phy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ qphy_setbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
SW_PWRDN);
mutex_unlock(&qmp->phy_mutex);
@@ -1889,11 +1851,9 @@ static int qmp_combo_com_init(struct qmp_phy *qphy)
return ret;
}
-static int qmp_combo_com_exit(struct qmp_phy *qphy)
+static int qmp_combo_com_exit(struct qmp_combo *qmp)
{
- struct qcom_qmp *qmp = qphy->qmp;
- struct qmp_phy *usb_phy = qmp->usb_phy;
- const struct qmp_phy_cfg *cfg = usb_phy->cfg;
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
mutex_lock(&qmp->phy_mutex);
if (--qmp->init_count) {
@@ -1914,76 +1874,75 @@ static int qmp_combo_com_exit(struct qmp_phy *qphy)
static int qmp_combo_dp_init(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
int ret;
- ret = qmp_combo_com_init(qphy);
+ ret = qmp_combo_com_init(qmp);
if (ret)
return ret;
- cfg->dp_aux_init(qphy);
+ cfg->dp_aux_init(qmp);
return 0;
}
static int qmp_combo_dp_exit(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
- qmp_combo_com_exit(qphy);
+ qmp_combo_com_exit(qmp);
return 0;
}
static int qmp_combo_dp_power_on(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
- const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *tx = qphy->dp_tx;
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ void __iomem *tx = qmp->dp_tx;
- qmp_combo_dp_serdes_init(qphy);
+ qmp_combo_dp_serdes_init(qmp);
qmp_combo_configure_lane(tx, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 1);
if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->dp_tx2, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 2);
+ qmp_combo_configure_lane(qmp->dp_tx2, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 2);
/* Configure special DP tx tunings */
- cfg->configure_dp_tx(qphy);
+ cfg->configure_dp_tx(qmp);
/* Configure link rate, swing, etc. */
- cfg->configure_dp_phy(qphy);
+ cfg->configure_dp_phy(qmp);
return 0;
}
static int qmp_combo_dp_power_off(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
/* Assert DP PHY power down */
- writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qmp->dp_pcs + QSERDES_DP_PHY_PD_CTL);
return 0;
}
static int qmp_combo_usb_power_on(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
- struct qcom_qmp *qmp = qphy->qmp;
- const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *serdes = qphy->serdes;
- void __iomem *tx = qphy->tx;
- void __iomem *rx = qphy->rx;
- void __iomem *pcs = qphy->pcs;
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ void __iomem *serdes = qmp->serdes;
+ void __iomem *tx = qmp->tx;
+ void __iomem *rx = qmp->rx;
+ void __iomem *pcs = qmp->pcs;
void __iomem *status;
unsigned int val;
int ret;
qmp_combo_configure(serdes, cfg->serdes_tbl, cfg->serdes_tbl_num);
- ret = clk_prepare_enable(qphy->pipe_clk);
+ ret = clk_prepare_enable(qmp->pipe_clk);
if (ret) {
dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
return ret;
@@ -1993,12 +1952,12 @@ static int qmp_combo_usb_power_on(struct phy *phy)
qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ qmp_combo_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
qmp_combo_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
+ qmp_combo_configure_lane(qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
@@ -2022,27 +1981,27 @@ static int qmp_combo_usb_power_on(struct phy *phy)
return 0;
err_disable_pipe_clk:
- clk_disable_unprepare(qphy->pipe_clk);
+ clk_disable_unprepare(qmp->pipe_clk);
return ret;
}
static int qmp_combo_usb_power_off(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
- clk_disable_unprepare(qphy->pipe_clk);
+ clk_disable_unprepare(qmp->pipe_clk);
/* PHY reset */
- qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+ qphy_setbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
/* stop SerDes and Phy-Coding-Sublayer */
- qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL],
+ qphy_clrbits(qmp->pcs, cfg->regs[QPHY_START_CTRL],
SERDES_START | PCS_START);
/* Put PHY into POWER DOWN state: active low */
- qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ qphy_clrbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
SW_PWRDN);
return 0;
@@ -2050,37 +2009,37 @@ static int qmp_combo_usb_power_off(struct phy *phy)
static int qmp_combo_usb_init(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
int ret;
- ret = qmp_combo_com_init(qphy);
+ ret = qmp_combo_com_init(qmp);
if (ret)
return ret;
ret = qmp_combo_usb_power_on(phy);
if (ret)
- qmp_combo_com_exit(qphy);
+ qmp_combo_com_exit(qmp);
return ret;
}
static int qmp_combo_usb_exit(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
int ret;
ret = qmp_combo_usb_power_off(phy);
if (ret)
return ret;
- return qmp_combo_com_exit(qphy);
+ return qmp_combo_com_exit(qmp);
}
static int qmp_combo_usb_set_mode(struct phy *phy, enum phy_mode mode, int submode)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
- qphy->mode = mode;
+ qmp->mode = mode;
return 0;
}
@@ -2102,15 +2061,15 @@ static const struct phy_ops qmp_combo_dp_phy_ops = {
.owner = THIS_MODULE,
};
-static void qmp_combo_enable_autonomous_mode(struct qmp_phy *qphy)
+static void qmp_combo_enable_autonomous_mode(struct qmp_combo *qmp)
{
- const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *pcs_usb = qphy->pcs_usb ?: qphy->pcs;
- void __iomem *pcs_misc = qphy->pcs_misc;
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ void __iomem *pcs_usb = qmp->pcs_usb ?: qmp->pcs;
+ void __iomem *pcs_misc = qmp->pcs_misc;
u32 intr_mask;
- if (qphy->mode == PHY_MODE_USB_HOST_SS ||
- qphy->mode == PHY_MODE_USB_DEVICE_SS)
+ if (qmp->mode == PHY_MODE_USB_HOST_SS ||
+ qmp->mode == PHY_MODE_USB_DEVICE_SS)
intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
else
intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
@@ -2131,11 +2090,11 @@ static void qmp_combo_enable_autonomous_mode(struct qmp_phy *qphy)
qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
}
-static void qmp_combo_disable_autonomous_mode(struct qmp_phy *qphy)
+static void qmp_combo_disable_autonomous_mode(struct qmp_combo *qmp)
{
- const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *pcs_usb = qphy->pcs_usb ?: qphy->pcs;
- void __iomem *pcs_misc = qphy->pcs_misc;
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ void __iomem *pcs_usb = qmp->pcs_usb ?: qmp->pcs;
+ void __iomem *pcs_misc = qmp->pcs_misc;
/* Disable i/o clamp_n on resume for normal mode */
if (pcs_misc)
@@ -2151,20 +2110,19 @@ static void qmp_combo_disable_autonomous_mode(struct qmp_phy *qphy)
static int __maybe_unused qmp_combo_runtime_suspend(struct device *dev)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
- struct qmp_phy *qphy = qmp->usb_phy;
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
- dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
+ dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qmp->mode);
if (!qmp->init_count) {
dev_vdbg(dev, "PHY not initialized, bailing out\n");
return 0;
}
- qmp_combo_enable_autonomous_mode(qphy);
+ qmp_combo_enable_autonomous_mode(qmp);
- clk_disable_unprepare(qphy->pipe_clk);
+ clk_disable_unprepare(qmp->pipe_clk);
clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
return 0;
@@ -2172,12 +2130,11 @@ static int __maybe_unused qmp_combo_runtime_suspend(struct device *dev)
static int __maybe_unused qmp_combo_runtime_resume(struct device *dev)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
- struct qmp_phy *qphy = qmp->usb_phy;
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
int ret = 0;
- dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
+ dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qmp->mode);
if (!qmp->init_count) {
dev_vdbg(dev, "PHY not initialized, bailing out\n");
@@ -2188,14 +2145,14 @@ static int __maybe_unused qmp_combo_runtime_resume(struct device *dev)
if (ret)
return ret;
- ret = clk_prepare_enable(qphy->pipe_clk);
+ ret = clk_prepare_enable(qmp->pipe_clk);
if (ret) {
dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
return ret;
}
- qmp_combo_disable_autonomous_mode(qphy);
+ qmp_combo_disable_autonomous_mode(qmp);
return 0;
}
@@ -2207,7 +2164,7 @@ static const struct dev_pm_ops qmp_combo_pm_ops = {
static int qmp_combo_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
int num = cfg->num_vregs;
int ret, i;
@@ -2239,7 +2196,7 @@ static int qmp_combo_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg
static int qmp_combo_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
int i;
int ret;
@@ -2260,7 +2217,7 @@ static int qmp_combo_reset_init(struct device *dev, const struct qmp_phy_cfg *cf
static int qmp_combo_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
int num = cfg->num_clks;
int i;
@@ -2297,7 +2254,7 @@ static void phy_clk_release_provider(void *res)
* clk | +-------+ | +-----+
* +---------------+
*/
-static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
+static int phy_pipe_clk_register(struct qmp_combo *qmp, struct device_node *np)
{
struct clk_fixed_rate *fixed;
struct clk_init_data init = { };
@@ -2400,12 +2357,12 @@ static unsigned long
qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
const struct qmp_phy_dp_clks *dp_clks;
- const struct qmp_phy *qphy;
+ const struct qmp_combo *qmp;
const struct phy_configure_opts_dp *dp_opts;
dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
- qphy = dp_clks->qphy;
- dp_opts = &qphy->dp_opts;
+ qmp = dp_clks->qmp;
+ dp_opts = &qmp->dp_opts;
switch (dp_opts->link_rate) {
case 1620:
@@ -2444,12 +2401,12 @@ static unsigned long
qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
const struct qmp_phy_dp_clks *dp_clks;
- const struct qmp_phy *qphy;
+ const struct qmp_combo *qmp;
const struct phy_configure_opts_dp *dp_opts;
dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
- qphy = dp_clks->qphy;
- dp_opts = &qphy->dp_opts;
+ qmp = dp_clks->qmp;
+ dp_opts = &qmp->dp_opts;
switch (dp_opts->link_rate) {
case 1620:
@@ -2484,8 +2441,7 @@ qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
return &dp_clks->dp_pixel_hw;
}
-static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
- struct device_node *np)
+static int phy_dp_clks_register(struct qmp_combo *qmp, struct device_node *np)
{
struct clk_init_data init = { };
struct qmp_phy_dp_clks *dp_clks;
@@ -2496,8 +2452,8 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
if (!dp_clks)
return -ENOMEM;
- dp_clks->qphy = qphy;
- qphy->dp_clks = dp_clks;
+ dp_clks->qmp = qmp;
+ qmp->dp_clks = dp_clks;
snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
init.ops = &qcom_qmp_dp_link_clk_ops;
@@ -2526,20 +2482,15 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
}
-static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int id,
+static int qmp_combo_create_dp(struct device *dev, struct device_node *np,
void __iomem *serdes, const struct qmp_phy_cfg *cfg)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
struct phy *generic_phy;
- struct qmp_phy *qphy;
int ret;
- qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
- if (!qphy)
- return -ENOMEM;
-
- qphy->cfg = cfg;
- qphy->dp_serdes = serdes;
+ qmp->cfg = cfg;
+ qmp->dp_serdes = serdes;
/*
* Get memory resources for each PHY:
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
@@ -2548,18 +2499,18 @@ static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int i
*
* Note that only tx/tx2 and pcs are used by the DP implementation.
*/
- qphy->dp_tx = devm_of_iomap(dev, np, 0, NULL);
- if (IS_ERR(qphy->dp_tx))
- return PTR_ERR(qphy->dp_tx);
+ qmp->dp_tx = devm_of_iomap(dev, np, 0, NULL);
+ if (IS_ERR(qmp->dp_tx))
+ return PTR_ERR(qmp->dp_tx);
- qphy->dp_pcs = devm_of_iomap(dev, np, 2, NULL);
- if (IS_ERR(qphy->dp_pcs))
- return PTR_ERR(qphy->dp_pcs);
+ qmp->dp_pcs = devm_of_iomap(dev, np, 2, NULL);
+ if (IS_ERR(qmp->dp_pcs))
+ return PTR_ERR(qmp->dp_pcs);
if (cfg->lanes >= 2) {
- qphy->dp_tx2 = devm_of_iomap(dev, np, 3, NULL);
- if (IS_ERR(qphy->dp_tx2))
- return PTR_ERR(qphy->dp_tx2);
+ qmp->dp_tx2 = devm_of_iomap(dev, np, 3, NULL);
+ if (IS_ERR(qmp->dp_tx2))
+ return PTR_ERR(qmp->dp_tx2);
}
generic_phy = devm_phy_create(dev, np, &qmp_combo_dp_phy_ops);
@@ -2569,72 +2520,65 @@ static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int i
return ret;
}
- qphy->phy = generic_phy;
- qphy->qmp = qmp;
- qmp->phys[id] = qphy;
- phy_set_drvdata(generic_phy, qphy);
+ qmp->dp_phy = generic_phy;
+ phy_set_drvdata(generic_phy, qmp);
return 0;
}
-static int qmp_combo_create_usb(struct device *dev, struct device_node *np, int id,
+static int qmp_combo_create_usb(struct device *dev, struct device_node *np,
void __iomem *serdes, const struct qmp_phy_cfg *cfg)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
struct phy *generic_phy;
- struct qmp_phy *qphy;
int ret;
- qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
- if (!qphy)
- return -ENOMEM;
-
- qphy->cfg = cfg;
- qphy->serdes = serdes;
+ qmp->cfg = cfg;
+ qmp->serdes = serdes;
/*
* Get memory resources for each PHY:
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
* For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
* For single lane PHYs: pcs_misc (optional) -> 3.
*/
- qphy->tx = devm_of_iomap(dev, np, 0, NULL);
- if (IS_ERR(qphy->tx))
- return PTR_ERR(qphy->tx);
+ qmp->tx = devm_of_iomap(dev, np, 0, NULL);
+ if (IS_ERR(qmp->tx))
+ return PTR_ERR(qmp->tx);
- qphy->rx = devm_of_iomap(dev, np, 1, NULL);
- if (IS_ERR(qphy->rx))
- return PTR_ERR(qphy->rx);
+ qmp->rx = devm_of_iomap(dev, np, 1, NULL);
+ if (IS_ERR(qmp->rx))
+ return PTR_ERR(qmp->rx);
- qphy->pcs = devm_of_iomap(dev, np, 2, NULL);
- if (IS_ERR(qphy->pcs))
- return PTR_ERR(qphy->pcs);
+ qmp->pcs = devm_of_iomap(dev, np, 2, NULL);
+ if (IS_ERR(qmp->pcs))
+ return PTR_ERR(qmp->pcs);
if (cfg->pcs_usb_offset)
- qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset;
+ qmp->pcs_usb = qmp->pcs + cfg->pcs_usb_offset;
if (cfg->lanes >= 2) {
- qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
- if (IS_ERR(qphy->tx2))
- return PTR_ERR(qphy->tx2);
+ qmp->tx2 = devm_of_iomap(dev, np, 3, NULL);
+ if (IS_ERR(qmp->tx2))
+ return PTR_ERR(qmp->tx2);
- qphy->rx2 = devm_of_iomap(dev, np, 4, NULL);
- if (IS_ERR(qphy->rx2))
- return PTR_ERR(qphy->rx2);
+ qmp->rx2 = devm_of_iomap(dev, np, 4, NULL);
+ if (IS_ERR(qmp->rx2))
+ return PTR_ERR(qmp->rx2);
- qphy->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
+ qmp->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
} else {
- qphy->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
+ qmp->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
}
- if (IS_ERR(qphy->pcs_misc)) {
+ if (IS_ERR(qmp->pcs_misc)) {
dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
- qphy->pcs_misc = NULL;
+ qmp->pcs_misc = NULL;
}
- qphy->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
- if (IS_ERR(qphy->pipe_clk)) {
- return dev_err_probe(dev, PTR_ERR(qphy->pipe_clk),
- "failed to get lane%d pipe_clk\n", id);
+ qmp->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
+ if (IS_ERR(qmp->pipe_clk)) {
+ return dev_err_probe(dev, PTR_ERR(qmp->pipe_clk),
+ "failed to get pipe clock\n");
}
generic_phy = devm_phy_create(dev, np, &qmp_combo_usb_phy_ops);
@@ -2644,17 +2588,15 @@ static int qmp_combo_create_usb(struct device *dev, struct device_node *np, int
return ret;
}
- qphy->phy = generic_phy;
- qphy->qmp = qmp;
- qmp->phys[id] = qphy;
- phy_set_drvdata(generic_phy, qphy);
+ qmp->usb_phy = generic_phy;
+ phy_set_drvdata(generic_phy, qmp);
return 0;
}
static int qmp_combo_probe(struct platform_device *pdev)
{
- struct qcom_qmp *qmp;
+ struct qmp_combo *qmp;
struct device *dev = &pdev->dev;
struct device_node *child;
struct phy_provider *phy_provider;
@@ -2709,10 +2651,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (num > expected_phys)
return -EINVAL;
- qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
- if (!qmp->phys)
- return -ENOMEM;
-
pm_runtime_set_active(dev);
ret = devm_pm_runtime_enable(dev);
if (ret)
@@ -2729,14 +2667,14 @@ static int qmp_combo_probe(struct platform_device *pdev)
serdes = dp_serdes;
/* Create per-lane phy */
- ret = qmp_combo_create_dp(dev, child, id, serdes, cfg);
+ ret = qmp_combo_create_dp(dev, child, serdes, cfg);
if (ret) {
dev_err(dev, "failed to create lane%d phy, %d\n",
id, ret);
goto err_node_put;
}
- ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
+ ret = phy_dp_clks_register(qmp, child);
if (ret) {
dev_err(qmp->dev,
"failed to register DP clock source\n");
@@ -2746,15 +2684,13 @@ static int qmp_combo_probe(struct platform_device *pdev)
serdes = usb_serdes;
/* Create per-lane phy */
- ret = qmp_combo_create_usb(dev, child, id, serdes, cfg);
+ ret = qmp_combo_create_usb(dev, child, serdes, cfg);
if (ret) {
dev_err(dev, "failed to create lane%d phy, %d\n",
id, ret);
goto err_node_put;
}
- qmp->usb_phy = qmp->phys[id];
-
/*
* Register the pipe clock provided by phy.
* See function description to see details of this pipe clock.
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 18/22] phy: qcom-qmp-combo: merge driver data
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
The QMP combo driver manages a single PHY (even if it provides two
interfaces for USB and DP, respectively) so merge the old qcom_qmp and
qmp_phy structures and drop the PHY array.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 690 ++++++++++------------
1 file changed, 313 insertions(+), 377 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 249912b75964..43b7ea5d2edc 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -796,7 +796,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
{ 0x3f, 0xff, 0xff, 0xff }
};
-struct qmp_phy;
+struct qmp_combo;
struct qmp_phy_cfg {
int lanes;
@@ -835,10 +835,10 @@ struct qmp_phy_cfg {
const u8 (*pre_emphasis_hbr3_hbr2)[4][4];
/* DP PHY callbacks */
- int (*configure_dp_phy)(struct qmp_phy *qphy);
- void (*configure_dp_tx)(struct qmp_phy *qphy);
- int (*calibrate_dp_phy)(struct qmp_phy *qphy);
- void (*dp_aux_init)(struct qmp_phy *qphy);
+ int (*configure_dp_phy)(struct qmp_combo *qmp);
+ void (*configure_dp_tx)(struct qmp_combo *qmp);
+ int (*calibrate_dp_phy)(struct qmp_combo *qmp);
+ void (*dp_aux_init)(struct qmp_combo *qmp);
/* clock ids to be requested */
const char * const *clk_list;
@@ -861,29 +861,19 @@ struct qmp_phy_cfg {
};
-/**
- * struct qmp_phy - per-lane phy descriptor
- *
- * @phy: generic phy
- * @cfg: phy specific configuration
- * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
- * @tx: iomapped memory space for lane's tx
- * @rx: iomapped memory space for lane's rx
- * @pcs: iomapped memory space for lane's pcs
- * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
- * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
- * @pcs_misc: iomapped memory space for lane's pcs_misc
- * @pcs_usb: iomapped memory space for lane's pcs_usb
- * @pipe_clk: pipe clock
- * @qmp: QMP phy to which this lane belongs
- * @mode: current PHY mode
- * @dp_aux_cfg: Display port aux config
- * @dp_opts: Display port optional config
- * @dp_clks: Display port clocks
- */
-struct qmp_phy {
- struct phy *phy;
+struct qmp_phy_dp_clks {
+ struct qmp_combo *qmp;
+ struct clk_hw dp_link_hw;
+ struct clk_hw dp_pixel_hw;
+};
+
+struct qmp_combo {
+ struct device *dev;
+
const struct qmp_phy_cfg *cfg;
+
+ void __iomem *dp_com;
+
void __iomem *serdes;
void __iomem *tx;
void __iomem *rx;
@@ -899,59 +889,33 @@ struct qmp_phy {
void __iomem *dp_pcs;
struct clk *pipe_clk;
- struct qcom_qmp *qmp;
- enum phy_mode mode;
- unsigned int dp_aux_cfg;
- struct phy_configure_opts_dp dp_opts;
- struct qmp_phy_dp_clks *dp_clks;
-};
-
-struct qmp_phy_dp_clks {
- struct qmp_phy *qphy;
- struct clk_hw dp_link_hw;
- struct clk_hw dp_pixel_hw;
-};
-
-/**
- * struct qcom_qmp - structure holding QMP phy block attributes
- *
- * @dev: device
- * @dp_com: iomapped memory space for phy's dp_com control block
- *
- * @clks: array of clocks required by phy
- * @resets: array of resets required by phy
- * @vregs: regulator supplies bulk data
- *
- * @phys: array of per-lane phy descriptors
- * @phy_mutex: mutex lock for PHY common block initialization
- * @init_count: phy common block initialization count
- */
-struct qcom_qmp {
- struct device *dev;
- void __iomem *dp_com;
-
struct clk_bulk_data *clks;
struct reset_control_bulk_data *resets;
struct regulator_bulk_data *vregs;
- struct qmp_phy **phys;
- struct qmp_phy *usb_phy;
-
struct mutex phy_mutex;
int init_count;
+
+ struct phy *usb_phy;
+ enum phy_mode mode;
+
+ struct phy *dp_phy;
+ unsigned int dp_aux_cfg;
+ struct phy_configure_opts_dp dp_opts;
+ struct qmp_phy_dp_clks *dp_clks;
};
-static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
-static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
-static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
-static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp);
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp);
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp);
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp);
-static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
-static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
-static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
-static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp);
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp);
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp);
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp);
-static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy);
+static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp);
static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
{
@@ -1265,11 +1229,11 @@ static void qmp_combo_configure(void __iomem *base,
qmp_combo_configure_lane(base, tbl, num, 0xff);
}
-static int qmp_combo_dp_serdes_init(struct qmp_phy *qphy)
+static int qmp_combo_dp_serdes_init(struct qmp_combo *qmp)
{
- const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *serdes = qphy->dp_serdes;
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ void __iomem *serdes = qmp->dp_serdes;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
qmp_combo_configure(serdes, cfg->dp_serdes_tbl, cfg->dp_serdes_tbl_num);
@@ -1298,54 +1262,54 @@ static int qmp_combo_dp_serdes_init(struct qmp_phy *qphy)
return 0;
}
-static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
+static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
- qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
+ qmp->dp_pcs + QSERDES_DP_PHY_PD_CTL);
/* Turn on BIAS current for PHY/PLL */
writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
- qphy->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+ qmp->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
- writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qmp->dp_pcs + QSERDES_DP_PHY_PD_CTL);
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_LANE_0_1_PWRDN |
DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
DP_PHY_PD_CTL_DP_CLAMP_EN,
- qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
+ qmp->dp_pcs + QSERDES_DP_PHY_PD_CTL);
writel(QSERDES_V3_COM_BIAS_EN |
QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
- qphy->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
-
- writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG0);
- writel(0x13, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
- writel(0x24, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG3);
- writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG4);
- writel(0x26, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG5);
- writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG6);
- writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG7);
- writel(0xbb, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG8);
- writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG9);
- qphy->dp_aux_cfg = 0;
+ qmp->dp_serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0x24, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xbb, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qmp->dp_aux_cfg = 0;
writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
PHY_AUX_REQ_ERR_MASK,
- qphy->dp_pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
+ qmp->dp_pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
}
-static int qmp_combo_configure_dp_swing(struct qmp_phy *qphy,
+static int qmp_combo_configure_dp_swing(struct qmp_combo *qmp,
unsigned int drv_lvl_reg, unsigned int emp_post_reg)
{
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
unsigned int v_level = 0, p_level = 0;
u8 voltage_swing_cfg, pre_emphasis_cfg;
int i;
@@ -1371,20 +1335,20 @@ static int qmp_combo_configure_dp_swing(struct qmp_phy *qphy,
voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
- writel(voltage_swing_cfg, qphy->dp_tx + drv_lvl_reg);
- writel(pre_emphasis_cfg, qphy->dp_tx + emp_post_reg);
- writel(voltage_swing_cfg, qphy->dp_tx2 + drv_lvl_reg);
- writel(pre_emphasis_cfg, qphy->dp_tx2 + emp_post_reg);
+ writel(voltage_swing_cfg, qmp->dp_tx + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qmp->dp_tx + emp_post_reg);
+ writel(voltage_swing_cfg, qmp->dp_tx2 + drv_lvl_reg);
+ writel(pre_emphasis_cfg, qmp->dp_tx2 + emp_post_reg);
return 0;
}
-static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
+static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp)
{
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 bias_en, drvr_en;
- if (qmp_combo_configure_dp_swing(qphy, QSERDES_V3_TX_TX_DRV_LVL,
+ if (qmp_combo_configure_dp_swing(qmp, QSERDES_V3_TX_TX_DRV_LVL,
QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
return;
@@ -1396,13 +1360,13 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
drvr_en = 0x10;
}
- writel(drvr_en, qphy->dp_tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
- writel(bias_en, qphy->dp_tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
- writel(drvr_en, qphy->dp_tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
- writel(bias_en, qphy->dp_tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qmp->dp_tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qmp->dp_tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qmp->dp_tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qmp->dp_tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
}
-static bool qmp_combo_configure_dp_mode(struct qmp_phy *qphy)
+static bool qmp_combo_configure_dp_mode(struct qmp_combo *qmp)
{
u32 val;
bool reverse = false;
@@ -1422,27 +1386,27 @@ static bool qmp_combo_configure_dp_mode(struct qmp_phy *qphy)
* if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
* val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
* if (orientation == ORIENTATION_CC2)
- * writel(0x4c, qphy->dp_pcs + QSERDES_V3_DP_PHY_MODE);
+ * writel(0x4c, qmp->dp_pcs + QSERDES_V3_DP_PHY_MODE);
*/
val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
- writel(val, qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
+ writel(val, qmp->dp_pcs + QSERDES_DP_PHY_PD_CTL);
- writel(0x5c, qphy->dp_pcs + QSERDES_DP_PHY_MODE);
+ writel(0x5c, qmp->dp_pcs + QSERDES_DP_PHY_MODE);
return reverse;
}
-static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
+static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp)
{
- const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct qmp_phy_dp_clks *dp_clks = qmp->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 phy_vco_div, status;
unsigned long pixel_freq;
- qmp_combo_configure_dp_mode(qphy);
+ qmp_combo_configure_dp_mode(qmp);
- writel(0x05, qphy->dp_pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
- writel(0x05, qphy->dp_pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
+ writel(0x05, qmp->dp_pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qmp->dp_pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
switch (dp_opts->link_rate) {
case 1620:
@@ -1465,40 +1429,40 @@ static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
/* Other link rates aren't supported */
return -EINVAL;
}
- writel(phy_vco_div, qphy->dp_pcs + QSERDES_V3_DP_PHY_VCO_DIV);
+ writel(phy_vco_div, qmp->dp_pcs + QSERDES_V3_DP_PHY_VCO_DIV);
clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
- writel(0x04, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x05, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x09, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x04, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x01, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x20, qphy->dp_serdes + QSERDES_V3_COM_RESETSM_CNTRL);
+ writel(0x20, qmp->dp_serdes + QSERDES_V3_COM_RESETSM_CNTRL);
- if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V3_COM_C_READY_STATUS,
+ if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V3_COM_C_READY_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V3_DP_PHY_STATUS,
+ if (readl_poll_timeout(qmp->dp_pcs + QSERDES_V3_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x18, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x18, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
udelay(2000);
- writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- return readl_poll_timeout(qphy->dp_pcs + QSERDES_V3_DP_PHY_STATUS,
+ return readl_poll_timeout(qmp->dp_pcs + QSERDES_V3_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
@@ -1509,76 +1473,76 @@ static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
* We need to calibrate the aux setting here as many times
* as the caller tries
*/
-static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
+static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp)
{
static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
u8 val;
- qphy->dp_aux_cfg++;
- qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
- val = cfg1_settings[qphy->dp_aux_cfg];
+ qmp->dp_aux_cfg++;
+ qmp->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qmp->dp_aux_cfg];
- writel(val, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(val, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
return 0;
}
-static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
+static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
- qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
+ qmp->dp_pcs + QSERDES_DP_PHY_PD_CTL);
/* Turn on BIAS current for PHY/PLL */
- writel(0x17, qphy->dp_serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
-
- writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG0);
- writel(0x13, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
- writel(0xa4, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x00, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG3);
- writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG4);
- writel(0x26, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG5);
- writel(0x0a, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG6);
- writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG7);
- writel(0xb7, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG8);
- writel(0x03, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG9);
- qphy->dp_aux_cfg = 0;
+ writel(0x17, qmp->dp_serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG0);
+ writel(0x13, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x00, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG3);
+ writel(0x0a, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG4);
+ writel(0x26, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG5);
+ writel(0x0a, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG6);
+ writel(0x03, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG7);
+ writel(0xb7, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG8);
+ writel(0x03, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG9);
+ qmp->dp_aux_cfg = 0;
writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
PHY_AUX_REQ_ERR_MASK,
- qphy->dp_pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
+ qmp->dp_pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
}
-static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
+static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp)
{
/* Program default values before writing proper values */
- writel(0x27, qphy->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x27, qphy->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qmp->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qmp->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x20, qphy->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
- writel(0x20, qphy->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qmp->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qmp->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
- qmp_combo_configure_dp_swing(qphy, QSERDES_V4_TX_TX_DRV_LVL,
+ qmp_combo_configure_dp_swing(qmp, QSERDES_V4_TX_TX_DRV_LVL,
QSERDES_V4_TX_TX_EMP_POST1_LVL);
}
-static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_phy *qphy)
+static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_combo *qmp)
{
- const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct qmp_phy_dp_clks *dp_clks = qmp->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 phy_vco_div, status;
unsigned long pixel_freq;
- writel(0x0f, qphy->dp_pcs + QSERDES_V4_DP_PHY_CFG_1);
+ writel(0x0f, qmp->dp_pcs + QSERDES_V4_DP_PHY_CFG_1);
- qmp_combo_configure_dp_mode(qphy);
+ qmp_combo_configure_dp_mode(qmp);
- writel(0x13, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
- writel(0xa4, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
+ writel(0x13, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(0xa4, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG2);
- writel(0x05, qphy->dp_pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
- writel(0x05, qphy->dp_pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
+ writel(0x05, qmp->dp_pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qmp->dp_pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
switch (dp_opts->link_rate) {
case 1620:
@@ -1601,49 +1565,49 @@ static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_phy *qphy)
/* Other link rates aren't supported */
return -EINVAL;
}
- writel(phy_vco_div, qphy->dp_pcs + QSERDES_V4_DP_PHY_VCO_DIV);
+ writel(phy_vco_div, qmp->dp_pcs + QSERDES_V4_DP_PHY_VCO_DIV);
clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
- writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x05, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x01, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x09, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x05, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x01, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x09, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- writel(0x20, qphy->dp_serdes + QSERDES_V4_COM_RESETSM_CNTRL);
+ writel(0x20, qmp->dp_serdes + QSERDES_V4_COM_RESETSM_CNTRL);
- if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V4_COM_C_READY_STATUS,
+ if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_C_READY_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
+ if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qphy->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
+ if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qmp->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qmp->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
@@ -1653,15 +1617,15 @@ static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_phy *qphy)
return 0;
}
-static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
+static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp)
{
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
bool reverse = false;
u32 status;
int ret;
- ret = qcom_qmp_v45_phy_configure_dp_phy(qphy);
+ ret = qcom_qmp_v45_phy_configure_dp_phy(qmp);
if (ret < 0)
return ret;
@@ -1687,43 +1651,43 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
drvr1_en = 0x10;
}
- writel(drvr0_en, qphy->dp_tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
- writel(bias0_en, qphy->dp_tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
- writel(drvr1_en, qphy->dp_tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
- writel(bias1_en, qphy->dp_tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr0_en, qmp->dp_tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qmp->dp_tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qmp->dp_tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qmp->dp_tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
- writel(0x18, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x18, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
udelay(2000);
- writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qmp->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x0a, qphy->dp_tx + QSERDES_V4_TX_TX_POL_INV);
- writel(0x0a, qphy->dp_tx2 + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qmp->dp_tx + QSERDES_V4_TX_TX_POL_INV);
+ writel(0x0a, qmp->dp_tx2 + QSERDES_V4_TX_TX_POL_INV);
- writel(0x27, qphy->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x27, qphy->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qmp->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
+ writel(0x27, qmp->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL);
- writel(0x20, qphy->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
- writel(0x20, qphy->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qmp->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qmp->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
return 0;
}
-static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy)
+static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp)
{
- const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
bool reverse = false;
u32 status;
int ret;
- ret = qcom_qmp_v45_phy_configure_dp_phy(qphy);
+ ret = qcom_qmp_v45_phy_configure_dp_phy(qmp);
if (ret < 0)
return ret;
@@ -1744,30 +1708,30 @@ static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy)
drvr1_en = 0x10;
}
- writel(drvr0_en, qphy->dp_tx + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
- writel(bias0_en, qphy->dp_tx + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
- writel(drvr1_en, qphy->dp_tx2 + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
- writel(bias1_en, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr0_en, qmp->dp_tx + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
+ writel(bias0_en, qmp->dp_tx + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr1_en, qmp->dp_tx2 + QSERDES_V5_5NM_TX_HIGHZ_DRVR_EN);
+ writel(bias1_en, qmp->dp_tx2 + QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN);
- writel(0x18, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x18, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
udelay(2000);
- writel(0x19, qphy->dp_pcs + QSERDES_DP_PHY_CFG);
+ writel(0x19, qmp->dp_pcs + QSERDES_DP_PHY_CFG);
- if (readl_poll_timeout(qphy->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
+ if (readl_poll_timeout(qmp->dp_pcs + QSERDES_V4_DP_PHY_STATUS,
status,
((status & BIT(1)) > 0),
500,
10000))
return -ETIMEDOUT;
- writel(0x0a, qphy->dp_tx + QSERDES_V5_5NM_TX_TX_POL_INV);
- writel(0x0a, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TX_POL_INV);
+ writel(0x0a, qmp->dp_tx + QSERDES_V5_5NM_TX_TX_POL_INV);
+ writel(0x0a, qmp->dp_tx2 + QSERDES_V5_5NM_TX_TX_POL_INV);
- writel(0x27, qphy->dp_tx + QSERDES_V5_5NM_TX_TX_DRV_LVL);
- writel(0x27, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TX_DRV_LVL);
+ writel(0x27, qmp->dp_tx + QSERDES_V5_5NM_TX_TX_DRV_LVL);
+ writel(0x27, qmp->dp_tx2 + QSERDES_V5_5NM_TX_TX_DRV_LVL);
- writel(0x20, qphy->dp_tx + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
- writel(0x20, qphy->dp_tx2 + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qmp->dp_tx + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
+ writel(0x20, qmp->dp_tx2 + QSERDES_V5_5NM_TX_TX_EMP_POST1_LVL);
return 0;
}
@@ -1776,16 +1740,16 @@ static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy)
* We need to calibrate the aux setting here as many times
* as the caller tries
*/
-static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
+static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp)
{
static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
u8 val;
- qphy->dp_aux_cfg++;
- qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
- val = cfg1_settings[qphy->dp_aux_cfg];
+ qmp->dp_aux_cfg++;
+ qmp->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qmp->dp_aux_cfg];
- writel(val, qphy->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
+ writel(val, qmp->dp_pcs + QSERDES_DP_PHY_AUX_CFG1);
return 0;
}
@@ -1793,13 +1757,13 @@ static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
static int qmp_combo_dp_configure(struct phy *phy, union phy_configure_opts *opts)
{
const struct phy_configure_opts_dp *dp_opts = &opts->dp;
- struct qmp_phy *qphy = phy_get_drvdata(phy);
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
- memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
- if (qphy->dp_opts.set_voltages) {
- cfg->configure_dp_tx(qphy);
- qphy->dp_opts.set_voltages = 0;
+ memcpy(&qmp->dp_opts, dp_opts, sizeof(*dp_opts));
+ if (qmp->dp_opts.set_voltages) {
+ cfg->configure_dp_tx(qmp);
+ qmp->dp_opts.set_voltages = 0;
}
return 0;
@@ -1807,20 +1771,18 @@ static int qmp_combo_dp_configure(struct phy *phy, union phy_configure_opts *opt
static int qmp_combo_dp_calibrate(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
if (cfg->calibrate_dp_phy)
- return cfg->calibrate_dp_phy(qphy);
+ return cfg->calibrate_dp_phy(qmp);
return 0;
}
-static int qmp_combo_com_init(struct qmp_phy *qphy)
+static int qmp_combo_com_init(struct qmp_combo *qmp)
{
- struct qcom_qmp *qmp = qphy->qmp;
- struct qmp_phy *usb_phy = qmp->usb_phy;
- const struct qmp_phy_cfg *cfg = usb_phy->cfg;
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
void __iomem *dp_com = qmp->dp_com;
int ret;
@@ -1872,7 +1834,7 @@ static int qmp_combo_com_init(struct qmp_phy *qphy)
qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
- qphy_setbits(usb_phy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ qphy_setbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
SW_PWRDN);
mutex_unlock(&qmp->phy_mutex);
@@ -1889,11 +1851,9 @@ static int qmp_combo_com_init(struct qmp_phy *qphy)
return ret;
}
-static int qmp_combo_com_exit(struct qmp_phy *qphy)
+static int qmp_combo_com_exit(struct qmp_combo *qmp)
{
- struct qcom_qmp *qmp = qphy->qmp;
- struct qmp_phy *usb_phy = qmp->usb_phy;
- const struct qmp_phy_cfg *cfg = usb_phy->cfg;
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
mutex_lock(&qmp->phy_mutex);
if (--qmp->init_count) {
@@ -1914,76 +1874,75 @@ static int qmp_combo_com_exit(struct qmp_phy *qphy)
static int qmp_combo_dp_init(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
int ret;
- ret = qmp_combo_com_init(qphy);
+ ret = qmp_combo_com_init(qmp);
if (ret)
return ret;
- cfg->dp_aux_init(qphy);
+ cfg->dp_aux_init(qmp);
return 0;
}
static int qmp_combo_dp_exit(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
- qmp_combo_com_exit(qphy);
+ qmp_combo_com_exit(qmp);
return 0;
}
static int qmp_combo_dp_power_on(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
- const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *tx = qphy->dp_tx;
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ void __iomem *tx = qmp->dp_tx;
- qmp_combo_dp_serdes_init(qphy);
+ qmp_combo_dp_serdes_init(qmp);
qmp_combo_configure_lane(tx, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 1);
if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->dp_tx2, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 2);
+ qmp_combo_configure_lane(qmp->dp_tx2, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 2);
/* Configure special DP tx tunings */
- cfg->configure_dp_tx(qphy);
+ cfg->configure_dp_tx(qmp);
/* Configure link rate, swing, etc. */
- cfg->configure_dp_phy(qphy);
+ cfg->configure_dp_phy(qmp);
return 0;
}
static int qmp_combo_dp_power_off(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
/* Assert DP PHY power down */
- writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->dp_pcs + QSERDES_DP_PHY_PD_CTL);
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qmp->dp_pcs + QSERDES_DP_PHY_PD_CTL);
return 0;
}
static int qmp_combo_usb_power_on(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
- struct qcom_qmp *qmp = qphy->qmp;
- const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *serdes = qphy->serdes;
- void __iomem *tx = qphy->tx;
- void __iomem *rx = qphy->rx;
- void __iomem *pcs = qphy->pcs;
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ void __iomem *serdes = qmp->serdes;
+ void __iomem *tx = qmp->tx;
+ void __iomem *rx = qmp->rx;
+ void __iomem *pcs = qmp->pcs;
void __iomem *status;
unsigned int val;
int ret;
qmp_combo_configure(serdes, cfg->serdes_tbl, cfg->serdes_tbl_num);
- ret = clk_prepare_enable(qphy->pipe_clk);
+ ret = clk_prepare_enable(qmp->pipe_clk);
if (ret) {
dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
return ret;
@@ -1993,12 +1952,12 @@ static int qmp_combo_usb_power_on(struct phy *phy)
qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ qmp_combo_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
qmp_combo_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qphy->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
+ qmp_combo_configure_lane(qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
@@ -2022,27 +1981,27 @@ static int qmp_combo_usb_power_on(struct phy *phy)
return 0;
err_disable_pipe_clk:
- clk_disable_unprepare(qphy->pipe_clk);
+ clk_disable_unprepare(qmp->pipe_clk);
return ret;
}
static int qmp_combo_usb_power_off(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
- clk_disable_unprepare(qphy->pipe_clk);
+ clk_disable_unprepare(qmp->pipe_clk);
/* PHY reset */
- qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+ qphy_setbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
/* stop SerDes and Phy-Coding-Sublayer */
- qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL],
+ qphy_clrbits(qmp->pcs, cfg->regs[QPHY_START_CTRL],
SERDES_START | PCS_START);
/* Put PHY into POWER DOWN state: active low */
- qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ qphy_clrbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
SW_PWRDN);
return 0;
@@ -2050,37 +2009,37 @@ static int qmp_combo_usb_power_off(struct phy *phy)
static int qmp_combo_usb_init(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
int ret;
- ret = qmp_combo_com_init(qphy);
+ ret = qmp_combo_com_init(qmp);
if (ret)
return ret;
ret = qmp_combo_usb_power_on(phy);
if (ret)
- qmp_combo_com_exit(qphy);
+ qmp_combo_com_exit(qmp);
return ret;
}
static int qmp_combo_usb_exit(struct phy *phy)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
int ret;
ret = qmp_combo_usb_power_off(phy);
if (ret)
return ret;
- return qmp_combo_com_exit(qphy);
+ return qmp_combo_com_exit(qmp);
}
static int qmp_combo_usb_set_mode(struct phy *phy, enum phy_mode mode, int submode)
{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qmp_combo *qmp = phy_get_drvdata(phy);
- qphy->mode = mode;
+ qmp->mode = mode;
return 0;
}
@@ -2102,15 +2061,15 @@ static const struct phy_ops qmp_combo_dp_phy_ops = {
.owner = THIS_MODULE,
};
-static void qmp_combo_enable_autonomous_mode(struct qmp_phy *qphy)
+static void qmp_combo_enable_autonomous_mode(struct qmp_combo *qmp)
{
- const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *pcs_usb = qphy->pcs_usb ?: qphy->pcs;
- void __iomem *pcs_misc = qphy->pcs_misc;
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ void __iomem *pcs_usb = qmp->pcs_usb ?: qmp->pcs;
+ void __iomem *pcs_misc = qmp->pcs_misc;
u32 intr_mask;
- if (qphy->mode == PHY_MODE_USB_HOST_SS ||
- qphy->mode == PHY_MODE_USB_DEVICE_SS)
+ if (qmp->mode == PHY_MODE_USB_HOST_SS ||
+ qmp->mode == PHY_MODE_USB_DEVICE_SS)
intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
else
intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
@@ -2131,11 +2090,11 @@ static void qmp_combo_enable_autonomous_mode(struct qmp_phy *qphy)
qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
}
-static void qmp_combo_disable_autonomous_mode(struct qmp_phy *qphy)
+static void qmp_combo_disable_autonomous_mode(struct qmp_combo *qmp)
{
- const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *pcs_usb = qphy->pcs_usb ?: qphy->pcs;
- void __iomem *pcs_misc = qphy->pcs_misc;
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ void __iomem *pcs_usb = qmp->pcs_usb ?: qmp->pcs;
+ void __iomem *pcs_misc = qmp->pcs_misc;
/* Disable i/o clamp_n on resume for normal mode */
if (pcs_misc)
@@ -2151,20 +2110,19 @@ static void qmp_combo_disable_autonomous_mode(struct qmp_phy *qphy)
static int __maybe_unused qmp_combo_runtime_suspend(struct device *dev)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
- struct qmp_phy *qphy = qmp->usb_phy;
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
- dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
+ dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qmp->mode);
if (!qmp->init_count) {
dev_vdbg(dev, "PHY not initialized, bailing out\n");
return 0;
}
- qmp_combo_enable_autonomous_mode(qphy);
+ qmp_combo_enable_autonomous_mode(qmp);
- clk_disable_unprepare(qphy->pipe_clk);
+ clk_disable_unprepare(qmp->pipe_clk);
clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
return 0;
@@ -2172,12 +2130,11 @@ static int __maybe_unused qmp_combo_runtime_suspend(struct device *dev)
static int __maybe_unused qmp_combo_runtime_resume(struct device *dev)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
- struct qmp_phy *qphy = qmp->usb_phy;
- const struct qmp_phy_cfg *cfg = qphy->cfg;
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
int ret = 0;
- dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
+ dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qmp->mode);
if (!qmp->init_count) {
dev_vdbg(dev, "PHY not initialized, bailing out\n");
@@ -2188,14 +2145,14 @@ static int __maybe_unused qmp_combo_runtime_resume(struct device *dev)
if (ret)
return ret;
- ret = clk_prepare_enable(qphy->pipe_clk);
+ ret = clk_prepare_enable(qmp->pipe_clk);
if (ret) {
dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
return ret;
}
- qmp_combo_disable_autonomous_mode(qphy);
+ qmp_combo_disable_autonomous_mode(qmp);
return 0;
}
@@ -2207,7 +2164,7 @@ static const struct dev_pm_ops qmp_combo_pm_ops = {
static int qmp_combo_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
int num = cfg->num_vregs;
int ret, i;
@@ -2239,7 +2196,7 @@ static int qmp_combo_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg
static int qmp_combo_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
int i;
int ret;
@@ -2260,7 +2217,7 @@ static int qmp_combo_reset_init(struct device *dev, const struct qmp_phy_cfg *cf
static int qmp_combo_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
int num = cfg->num_clks;
int i;
@@ -2297,7 +2254,7 @@ static void phy_clk_release_provider(void *res)
* clk | +-------+ | +-----+
* +---------------+
*/
-static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
+static int phy_pipe_clk_register(struct qmp_combo *qmp, struct device_node *np)
{
struct clk_fixed_rate *fixed;
struct clk_init_data init = { };
@@ -2400,12 +2357,12 @@ static unsigned long
qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
const struct qmp_phy_dp_clks *dp_clks;
- const struct qmp_phy *qphy;
+ const struct qmp_combo *qmp;
const struct phy_configure_opts_dp *dp_opts;
dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
- qphy = dp_clks->qphy;
- dp_opts = &qphy->dp_opts;
+ qmp = dp_clks->qmp;
+ dp_opts = &qmp->dp_opts;
switch (dp_opts->link_rate) {
case 1620:
@@ -2444,12 +2401,12 @@ static unsigned long
qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
const struct qmp_phy_dp_clks *dp_clks;
- const struct qmp_phy *qphy;
+ const struct qmp_combo *qmp;
const struct phy_configure_opts_dp *dp_opts;
dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
- qphy = dp_clks->qphy;
- dp_opts = &qphy->dp_opts;
+ qmp = dp_clks->qmp;
+ dp_opts = &qmp->dp_opts;
switch (dp_opts->link_rate) {
case 1620:
@@ -2484,8 +2441,7 @@ qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
return &dp_clks->dp_pixel_hw;
}
-static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
- struct device_node *np)
+static int phy_dp_clks_register(struct qmp_combo *qmp, struct device_node *np)
{
struct clk_init_data init = { };
struct qmp_phy_dp_clks *dp_clks;
@@ -2496,8 +2452,8 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
if (!dp_clks)
return -ENOMEM;
- dp_clks->qphy = qphy;
- qphy->dp_clks = dp_clks;
+ dp_clks->qmp = qmp;
+ qmp->dp_clks = dp_clks;
snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev));
init.ops = &qcom_qmp_dp_link_clk_ops;
@@ -2526,20 +2482,15 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
}
-static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int id,
+static int qmp_combo_create_dp(struct device *dev, struct device_node *np,
void __iomem *serdes, const struct qmp_phy_cfg *cfg)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
struct phy *generic_phy;
- struct qmp_phy *qphy;
int ret;
- qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
- if (!qphy)
- return -ENOMEM;
-
- qphy->cfg = cfg;
- qphy->dp_serdes = serdes;
+ qmp->cfg = cfg;
+ qmp->dp_serdes = serdes;
/*
* Get memory resources for each PHY:
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
@@ -2548,18 +2499,18 @@ static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int i
*
* Note that only tx/tx2 and pcs are used by the DP implementation.
*/
- qphy->dp_tx = devm_of_iomap(dev, np, 0, NULL);
- if (IS_ERR(qphy->dp_tx))
- return PTR_ERR(qphy->dp_tx);
+ qmp->dp_tx = devm_of_iomap(dev, np, 0, NULL);
+ if (IS_ERR(qmp->dp_tx))
+ return PTR_ERR(qmp->dp_tx);
- qphy->dp_pcs = devm_of_iomap(dev, np, 2, NULL);
- if (IS_ERR(qphy->dp_pcs))
- return PTR_ERR(qphy->dp_pcs);
+ qmp->dp_pcs = devm_of_iomap(dev, np, 2, NULL);
+ if (IS_ERR(qmp->dp_pcs))
+ return PTR_ERR(qmp->dp_pcs);
if (cfg->lanes >= 2) {
- qphy->dp_tx2 = devm_of_iomap(dev, np, 3, NULL);
- if (IS_ERR(qphy->dp_tx2))
- return PTR_ERR(qphy->dp_tx2);
+ qmp->dp_tx2 = devm_of_iomap(dev, np, 3, NULL);
+ if (IS_ERR(qmp->dp_tx2))
+ return PTR_ERR(qmp->dp_tx2);
}
generic_phy = devm_phy_create(dev, np, &qmp_combo_dp_phy_ops);
@@ -2569,72 +2520,65 @@ static int qmp_combo_create_dp(struct device *dev, struct device_node *np, int i
return ret;
}
- qphy->phy = generic_phy;
- qphy->qmp = qmp;
- qmp->phys[id] = qphy;
- phy_set_drvdata(generic_phy, qphy);
+ qmp->dp_phy = generic_phy;
+ phy_set_drvdata(generic_phy, qmp);
return 0;
}
-static int qmp_combo_create_usb(struct device *dev, struct device_node *np, int id,
+static int qmp_combo_create_usb(struct device *dev, struct device_node *np,
void __iomem *serdes, const struct qmp_phy_cfg *cfg)
{
- struct qcom_qmp *qmp = dev_get_drvdata(dev);
+ struct qmp_combo *qmp = dev_get_drvdata(dev);
struct phy *generic_phy;
- struct qmp_phy *qphy;
int ret;
- qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
- if (!qphy)
- return -ENOMEM;
-
- qphy->cfg = cfg;
- qphy->serdes = serdes;
+ qmp->cfg = cfg;
+ qmp->serdes = serdes;
/*
* Get memory resources for each PHY:
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
* For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
* For single lane PHYs: pcs_misc (optional) -> 3.
*/
- qphy->tx = devm_of_iomap(dev, np, 0, NULL);
- if (IS_ERR(qphy->tx))
- return PTR_ERR(qphy->tx);
+ qmp->tx = devm_of_iomap(dev, np, 0, NULL);
+ if (IS_ERR(qmp->tx))
+ return PTR_ERR(qmp->tx);
- qphy->rx = devm_of_iomap(dev, np, 1, NULL);
- if (IS_ERR(qphy->rx))
- return PTR_ERR(qphy->rx);
+ qmp->rx = devm_of_iomap(dev, np, 1, NULL);
+ if (IS_ERR(qmp->rx))
+ return PTR_ERR(qmp->rx);
- qphy->pcs = devm_of_iomap(dev, np, 2, NULL);
- if (IS_ERR(qphy->pcs))
- return PTR_ERR(qphy->pcs);
+ qmp->pcs = devm_of_iomap(dev, np, 2, NULL);
+ if (IS_ERR(qmp->pcs))
+ return PTR_ERR(qmp->pcs);
if (cfg->pcs_usb_offset)
- qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset;
+ qmp->pcs_usb = qmp->pcs + cfg->pcs_usb_offset;
if (cfg->lanes >= 2) {
- qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
- if (IS_ERR(qphy->tx2))
- return PTR_ERR(qphy->tx2);
+ qmp->tx2 = devm_of_iomap(dev, np, 3, NULL);
+ if (IS_ERR(qmp->tx2))
+ return PTR_ERR(qmp->tx2);
- qphy->rx2 = devm_of_iomap(dev, np, 4, NULL);
- if (IS_ERR(qphy->rx2))
- return PTR_ERR(qphy->rx2);
+ qmp->rx2 = devm_of_iomap(dev, np, 4, NULL);
+ if (IS_ERR(qmp->rx2))
+ return PTR_ERR(qmp->rx2);
- qphy->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
+ qmp->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
} else {
- qphy->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
+ qmp->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
}
- if (IS_ERR(qphy->pcs_misc)) {
+ if (IS_ERR(qmp->pcs_misc)) {
dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
- qphy->pcs_misc = NULL;
+ qmp->pcs_misc = NULL;
}
- qphy->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
- if (IS_ERR(qphy->pipe_clk)) {
- return dev_err_probe(dev, PTR_ERR(qphy->pipe_clk),
- "failed to get lane%d pipe_clk\n", id);
+ qmp->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
+ if (IS_ERR(qmp->pipe_clk)) {
+ return dev_err_probe(dev, PTR_ERR(qmp->pipe_clk),
+ "failed to get pipe clock\n");
}
generic_phy = devm_phy_create(dev, np, &qmp_combo_usb_phy_ops);
@@ -2644,17 +2588,15 @@ static int qmp_combo_create_usb(struct device *dev, struct device_node *np, int
return ret;
}
- qphy->phy = generic_phy;
- qphy->qmp = qmp;
- qmp->phys[id] = qphy;
- phy_set_drvdata(generic_phy, qphy);
+ qmp->usb_phy = generic_phy;
+ phy_set_drvdata(generic_phy, qmp);
return 0;
}
static int qmp_combo_probe(struct platform_device *pdev)
{
- struct qcom_qmp *qmp;
+ struct qmp_combo *qmp;
struct device *dev = &pdev->dev;
struct device_node *child;
struct phy_provider *phy_provider;
@@ -2709,10 +2651,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (num > expected_phys)
return -EINVAL;
- qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
- if (!qmp->phys)
- return -ENOMEM;
-
pm_runtime_set_active(dev);
ret = devm_pm_runtime_enable(dev);
if (ret)
@@ -2729,14 +2667,14 @@ static int qmp_combo_probe(struct platform_device *pdev)
serdes = dp_serdes;
/* Create per-lane phy */
- ret = qmp_combo_create_dp(dev, child, id, serdes, cfg);
+ ret = qmp_combo_create_dp(dev, child, serdes, cfg);
if (ret) {
dev_err(dev, "failed to create lane%d phy, %d\n",
id, ret);
goto err_node_put;
}
- ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
+ ret = phy_dp_clks_register(qmp, child);
if (ret) {
dev_err(qmp->dev,
"failed to register DP clock source\n");
@@ -2746,15 +2684,13 @@ static int qmp_combo_probe(struct platform_device *pdev)
serdes = usb_serdes;
/* Create per-lane phy */
- ret = qmp_combo_create_usb(dev, child, id, serdes, cfg);
+ ret = qmp_combo_create_usb(dev, child, serdes, cfg);
if (ret) {
dev_err(dev, "failed to create lane%d phy, %d\n",
id, ret);
goto err_node_put;
}
- qmp->usb_phy = qmp->phys[id];
-
/*
* Register the pipe clock provided by phy.
* See function description to see details of this pipe clock.
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 19/22] phy: qcom-qmp-combo: clean up device-tree parsing
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Since the QMP driver split there will be precisely two child nodes so
drop the obsolete iteration construct.
While at it, drop the verbose error logging that would have been printed
also on probe deferrals.
Note that there is no need to check if there are additional child nodes
(the kernel is not a devicetree validator), but let's return an error if
either child node is missing.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 82 ++++++++---------------
1 file changed, 28 insertions(+), 54 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 43b7ea5d2edc..a4df228d8ae2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2598,13 +2598,12 @@ static int qmp_combo_probe(struct platform_device *pdev)
{
struct qmp_combo *qmp;
struct device *dev = &pdev->dev;
- struct device_node *child;
+ struct device_node *dp_np, *usb_np;
struct phy_provider *phy_provider;
void __iomem *serdes;
void __iomem *usb_serdes;
void __iomem *dp_serdes = NULL;
const struct qmp_phy_cfg *cfg = NULL;
- int num, id, expected_phys;
int ret;
qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
@@ -2630,8 +2629,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (IS_ERR(dp_serdes))
return PTR_ERR(dp_serdes);
- expected_phys = 2;
-
mutex_init(&qmp->phy_mutex);
ret = qmp_combo_clk_init(dev, cfg);
@@ -2646,75 +2643,52 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (ret)
return ret;
- num = of_get_available_child_count(dev->of_node);
- /* do we have a rogue child node ? */
- if (num > expected_phys)
+ usb_np = of_get_child_by_name(dev->of_node, "usb3-phy");
+ if (!usb_np)
+ return -EINVAL;
+
+ dp_np = of_get_child_by_name(dev->of_node, "dp-phy");
+ if (!dp_np) {
+ of_node_put(usb_np);
return -EINVAL;
+ }
pm_runtime_set_active(dev);
ret = devm_pm_runtime_enable(dev);
if (ret)
- return ret;
+ goto err_node_put;
/*
* Prevent runtime pm from being ON by default. Users can enable
* it using power/control in sysfs.
*/
pm_runtime_forbid(dev);
- id = 0;
- for_each_available_child_of_node(dev->of_node, child) {
- if (of_node_name_eq(child, "dp-phy")) {
- serdes = dp_serdes;
-
- /* Create per-lane phy */
- ret = qmp_combo_create_dp(dev, child, serdes, cfg);
- if (ret) {
- dev_err(dev, "failed to create lane%d phy, %d\n",
- id, ret);
- goto err_node_put;
- }
-
- ret = phy_dp_clks_register(qmp, child);
- if (ret) {
- dev_err(qmp->dev,
- "failed to register DP clock source\n");
- goto err_node_put;
- }
- } else if (of_node_name_eq(child, "usb3-phy")) {
- serdes = usb_serdes;
-
- /* Create per-lane phy */
- ret = qmp_combo_create_usb(dev, child, serdes, cfg);
- if (ret) {
- dev_err(dev, "failed to create lane%d phy, %d\n",
- id, ret);
- goto err_node_put;
- }
-
- /*
- * Register the pipe clock provided by phy.
- * See function description to see details of this pipe clock.
- */
- ret = phy_pipe_clk_register(qmp, child);
- if (ret) {
- dev_err(qmp->dev,
- "failed to register pipe clock source\n");
- goto err_node_put;
- }
- }
+ ret = qmp_combo_create_usb(dev, usb_np, usb_serdes, cfg);
+ if (ret)
+ goto err_node_put;
- id++;
- }
+ ret = phy_pipe_clk_register(qmp, usb_np);
+ if (ret)
+ goto err_node_put;
- if (!qmp->usb_phy)
- return -EINVAL;
+ ret = qmp_combo_create_dp(dev, dp_np, dp_serdes, cfg);
+ if (ret)
+ goto err_node_put;
+
+ ret = phy_dp_clks_register(qmp, dp_np);
+ if (ret)
+ goto err_node_put;
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ of_node_put(usb_np);
+ of_node_put(dp_np);
+
return PTR_ERR_OR_ZERO(phy_provider);
err_node_put:
- of_node_put(child);
+ of_node_put(usb_np);
+ of_node_put(dp_np);
return ret;
}
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 19/22] phy: qcom-qmp-combo: clean up device-tree parsing
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Since the QMP driver split there will be precisely two child nodes so
drop the obsolete iteration construct.
While at it, drop the verbose error logging that would have been printed
also on probe deferrals.
Note that there is no need to check if there are additional child nodes
(the kernel is not a devicetree validator), but let's return an error if
either child node is missing.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 82 ++++++++---------------
1 file changed, 28 insertions(+), 54 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 43b7ea5d2edc..a4df228d8ae2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2598,13 +2598,12 @@ static int qmp_combo_probe(struct platform_device *pdev)
{
struct qmp_combo *qmp;
struct device *dev = &pdev->dev;
- struct device_node *child;
+ struct device_node *dp_np, *usb_np;
struct phy_provider *phy_provider;
void __iomem *serdes;
void __iomem *usb_serdes;
void __iomem *dp_serdes = NULL;
const struct qmp_phy_cfg *cfg = NULL;
- int num, id, expected_phys;
int ret;
qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
@@ -2630,8 +2629,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (IS_ERR(dp_serdes))
return PTR_ERR(dp_serdes);
- expected_phys = 2;
-
mutex_init(&qmp->phy_mutex);
ret = qmp_combo_clk_init(dev, cfg);
@@ -2646,75 +2643,52 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (ret)
return ret;
- num = of_get_available_child_count(dev->of_node);
- /* do we have a rogue child node ? */
- if (num > expected_phys)
+ usb_np = of_get_child_by_name(dev->of_node, "usb3-phy");
+ if (!usb_np)
+ return -EINVAL;
+
+ dp_np = of_get_child_by_name(dev->of_node, "dp-phy");
+ if (!dp_np) {
+ of_node_put(usb_np);
return -EINVAL;
+ }
pm_runtime_set_active(dev);
ret = devm_pm_runtime_enable(dev);
if (ret)
- return ret;
+ goto err_node_put;
/*
* Prevent runtime pm from being ON by default. Users can enable
* it using power/control in sysfs.
*/
pm_runtime_forbid(dev);
- id = 0;
- for_each_available_child_of_node(dev->of_node, child) {
- if (of_node_name_eq(child, "dp-phy")) {
- serdes = dp_serdes;
-
- /* Create per-lane phy */
- ret = qmp_combo_create_dp(dev, child, serdes, cfg);
- if (ret) {
- dev_err(dev, "failed to create lane%d phy, %d\n",
- id, ret);
- goto err_node_put;
- }
-
- ret = phy_dp_clks_register(qmp, child);
- if (ret) {
- dev_err(qmp->dev,
- "failed to register DP clock source\n");
- goto err_node_put;
- }
- } else if (of_node_name_eq(child, "usb3-phy")) {
- serdes = usb_serdes;
-
- /* Create per-lane phy */
- ret = qmp_combo_create_usb(dev, child, serdes, cfg);
- if (ret) {
- dev_err(dev, "failed to create lane%d phy, %d\n",
- id, ret);
- goto err_node_put;
- }
-
- /*
- * Register the pipe clock provided by phy.
- * See function description to see details of this pipe clock.
- */
- ret = phy_pipe_clk_register(qmp, child);
- if (ret) {
- dev_err(qmp->dev,
- "failed to register pipe clock source\n");
- goto err_node_put;
- }
- }
+ ret = qmp_combo_create_usb(dev, usb_np, usb_serdes, cfg);
+ if (ret)
+ goto err_node_put;
- id++;
- }
+ ret = phy_pipe_clk_register(qmp, usb_np);
+ if (ret)
+ goto err_node_put;
- if (!qmp->usb_phy)
- return -EINVAL;
+ ret = qmp_combo_create_dp(dev, dp_np, dp_serdes, cfg);
+ if (ret)
+ goto err_node_put;
+
+ ret = phy_dp_clks_register(qmp, dp_np);
+ if (ret)
+ goto err_node_put;
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ of_node_put(usb_np);
+ of_node_put(dp_np);
+
return PTR_ERR_OR_ZERO(phy_provider);
err_node_put:
- of_node_put(child);
+ of_node_put(usb_np);
+ of_node_put(dp_np);
return ret;
}
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 20/22] phy: qcom-qmp-combo: clean up probe initialisation
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Stop abusing the driver data pointer and instead pass the driver state
structure directly to the initialisation helpers during probe.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 62 ++++++++++-------------
1 file changed, 28 insertions(+), 34 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index a4df228d8ae2..bb2c86976f78 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2162,9 +2162,10 @@ static const struct dev_pm_ops qmp_combo_pm_ops = {
qmp_combo_runtime_resume, NULL)
};
-static int qmp_combo_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+static int qmp_combo_vreg_init(struct qmp_combo *qmp)
{
- struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ struct device *dev = qmp->dev;
int num = cfg->num_vregs;
int ret, i;
@@ -2194,9 +2195,10 @@ static int qmp_combo_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg
return 0;
}
-static int qmp_combo_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+static int qmp_combo_reset_init(struct qmp_combo *qmp)
{
- struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ struct device *dev = qmp->dev;
int i;
int ret;
@@ -2215,9 +2217,10 @@ static int qmp_combo_reset_init(struct device *dev, const struct qmp_phy_cfg *cf
return 0;
}
-static int qmp_combo_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+static int qmp_combo_clk_init(struct qmp_combo *qmp)
{
- struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ struct device *dev = qmp->dev;
int num = cfg->num_clks;
int i;
@@ -2482,15 +2485,13 @@ static int phy_dp_clks_register(struct qmp_combo *qmp, struct device_node *np)
return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
}
-static int qmp_combo_create_dp(struct device *dev, struct device_node *np,
- void __iomem *serdes, const struct qmp_phy_cfg *cfg)
+static int qmp_combo_create_dp(struct qmp_combo *qmp, struct device_node *np)
{
- struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ struct device *dev = qmp->dev;
struct phy *generic_phy;
int ret;
- qmp->cfg = cfg;
- qmp->dp_serdes = serdes;
/*
* Get memory resources for each PHY:
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
@@ -2526,15 +2527,13 @@ static int qmp_combo_create_dp(struct device *dev, struct device_node *np,
return 0;
}
-static int qmp_combo_create_usb(struct device *dev, struct device_node *np,
- void __iomem *serdes, const struct qmp_phy_cfg *cfg)
+static int qmp_combo_create_usb(struct qmp_combo *qmp, struct device_node *np)
{
- struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ struct device *dev = qmp->dev;
struct phy *generic_phy;
int ret;
- qmp->cfg = cfg;
- qmp->serdes = serdes;
/*
* Get memory resources for each PHY:
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
@@ -2600,10 +2599,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *dp_np, *usb_np;
struct phy_provider *phy_provider;
- void __iomem *serdes;
- void __iomem *usb_serdes;
- void __iomem *dp_serdes = NULL;
- const struct qmp_phy_cfg *cfg = NULL;
int ret;
qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
@@ -2611,35 +2606,34 @@ static int qmp_combo_probe(struct platform_device *pdev)
return -ENOMEM;
qmp->dev = dev;
- dev_set_drvdata(dev, qmp);
- cfg = of_device_get_match_data(dev);
- if (!cfg)
+ qmp->cfg = of_device_get_match_data(dev);
+ if (!qmp->cfg)
return -EINVAL;
- usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(serdes))
- return PTR_ERR(serdes);
+ qmp->serdes = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(qmp->serdes))
+ return PTR_ERR(qmp->serdes);
qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(qmp->dp_com))
return PTR_ERR(qmp->dp_com);
- dp_serdes = devm_platform_ioremap_resource(pdev, 2);
- if (IS_ERR(dp_serdes))
- return PTR_ERR(dp_serdes);
+ qmp->dp_serdes = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(qmp->dp_serdes))
+ return PTR_ERR(qmp->dp_serdes);
mutex_init(&qmp->phy_mutex);
- ret = qmp_combo_clk_init(dev, cfg);
+ ret = qmp_combo_clk_init(qmp);
if (ret)
return ret;
- ret = qmp_combo_reset_init(dev, cfg);
+ ret = qmp_combo_reset_init(qmp);
if (ret)
return ret;
- ret = qmp_combo_vreg_init(dev, cfg);
+ ret = qmp_combo_vreg_init(qmp);
if (ret)
return ret;
@@ -2663,7 +2657,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
*/
pm_runtime_forbid(dev);
- ret = qmp_combo_create_usb(dev, usb_np, usb_serdes, cfg);
+ ret = qmp_combo_create_usb(qmp, usb_np);
if (ret)
goto err_node_put;
@@ -2671,7 +2665,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (ret)
goto err_node_put;
- ret = qmp_combo_create_dp(dev, dp_np, dp_serdes, cfg);
+ ret = qmp_combo_create_dp(qmp, dp_np);
if (ret)
goto err_node_put;
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 20/22] phy: qcom-qmp-combo: clean up probe initialisation
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Stop abusing the driver data pointer and instead pass the driver state
structure directly to the initialisation helpers during probe.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 62 ++++++++++-------------
1 file changed, 28 insertions(+), 34 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index a4df228d8ae2..bb2c86976f78 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2162,9 +2162,10 @@ static const struct dev_pm_ops qmp_combo_pm_ops = {
qmp_combo_runtime_resume, NULL)
};
-static int qmp_combo_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+static int qmp_combo_vreg_init(struct qmp_combo *qmp)
{
- struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ struct device *dev = qmp->dev;
int num = cfg->num_vregs;
int ret, i;
@@ -2194,9 +2195,10 @@ static int qmp_combo_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg
return 0;
}
-static int qmp_combo_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+static int qmp_combo_reset_init(struct qmp_combo *qmp)
{
- struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ struct device *dev = qmp->dev;
int i;
int ret;
@@ -2215,9 +2217,10 @@ static int qmp_combo_reset_init(struct device *dev, const struct qmp_phy_cfg *cf
return 0;
}
-static int qmp_combo_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
+static int qmp_combo_clk_init(struct qmp_combo *qmp)
{
- struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ struct device *dev = qmp->dev;
int num = cfg->num_clks;
int i;
@@ -2482,15 +2485,13 @@ static int phy_dp_clks_register(struct qmp_combo *qmp, struct device_node *np)
return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
}
-static int qmp_combo_create_dp(struct device *dev, struct device_node *np,
- void __iomem *serdes, const struct qmp_phy_cfg *cfg)
+static int qmp_combo_create_dp(struct qmp_combo *qmp, struct device_node *np)
{
- struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ struct device *dev = qmp->dev;
struct phy *generic_phy;
int ret;
- qmp->cfg = cfg;
- qmp->dp_serdes = serdes;
/*
* Get memory resources for each PHY:
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
@@ -2526,15 +2527,13 @@ static int qmp_combo_create_dp(struct device *dev, struct device_node *np,
return 0;
}
-static int qmp_combo_create_usb(struct device *dev, struct device_node *np,
- void __iomem *serdes, const struct qmp_phy_cfg *cfg)
+static int qmp_combo_create_usb(struct qmp_combo *qmp, struct device_node *np)
{
- struct qmp_combo *qmp = dev_get_drvdata(dev);
+ const struct qmp_phy_cfg *cfg = qmp->cfg;
+ struct device *dev = qmp->dev;
struct phy *generic_phy;
int ret;
- qmp->cfg = cfg;
- qmp->serdes = serdes;
/*
* Get memory resources for each PHY:
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
@@ -2600,10 +2599,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *dp_np, *usb_np;
struct phy_provider *phy_provider;
- void __iomem *serdes;
- void __iomem *usb_serdes;
- void __iomem *dp_serdes = NULL;
- const struct qmp_phy_cfg *cfg = NULL;
int ret;
qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
@@ -2611,35 +2606,34 @@ static int qmp_combo_probe(struct platform_device *pdev)
return -ENOMEM;
qmp->dev = dev;
- dev_set_drvdata(dev, qmp);
- cfg = of_device_get_match_data(dev);
- if (!cfg)
+ qmp->cfg = of_device_get_match_data(dev);
+ if (!qmp->cfg)
return -EINVAL;
- usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(serdes))
- return PTR_ERR(serdes);
+ qmp->serdes = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(qmp->serdes))
+ return PTR_ERR(qmp->serdes);
qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(qmp->dp_com))
return PTR_ERR(qmp->dp_com);
- dp_serdes = devm_platform_ioremap_resource(pdev, 2);
- if (IS_ERR(dp_serdes))
- return PTR_ERR(dp_serdes);
+ qmp->dp_serdes = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(qmp->dp_serdes))
+ return PTR_ERR(qmp->dp_serdes);
mutex_init(&qmp->phy_mutex);
- ret = qmp_combo_clk_init(dev, cfg);
+ ret = qmp_combo_clk_init(qmp);
if (ret)
return ret;
- ret = qmp_combo_reset_init(dev, cfg);
+ ret = qmp_combo_reset_init(qmp);
if (ret)
return ret;
- ret = qmp_combo_vreg_init(dev, cfg);
+ ret = qmp_combo_vreg_init(qmp);
if (ret)
return ret;
@@ -2663,7 +2657,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
*/
pm_runtime_forbid(dev);
- ret = qmp_combo_create_usb(dev, usb_np, usb_serdes, cfg);
+ ret = qmp_combo_create_usb(qmp, usb_np);
if (ret)
goto err_node_put;
@@ -2671,7 +2665,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (ret)
goto err_node_put;
- ret = qmp_combo_create_dp(dev, dp_np, dp_serdes, cfg);
+ ret = qmp_combo_create_dp(qmp, dp_np);
if (ret)
goto err_node_put;
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 21/22] phy: qcom-qmp-combo: clean up PHY init
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Clean up the USB PHY initialisation somewhat by programming both tx and
rx for the second lane after the first lane.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index bb2c86976f78..6d98d37f8562 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1950,14 +1950,12 @@ static int qmp_combo_usb_power_on(struct phy *phy)
/* Tx, Rx, and PCS configurations */
qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
-
- if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
-
qmp_combo_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
- if (cfg->lanes >= 2)
+ if (cfg->lanes >= 2) {
+ qmp_combo_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
qmp_combo_configure_lane(qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
+ }
qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 21/22] phy: qcom-qmp-combo: clean up PHY init
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Clean up the USB PHY initialisation somewhat by programming both tx and
rx for the second lane after the first lane.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index bb2c86976f78..6d98d37f8562 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1950,14 +1950,12 @@ static int qmp_combo_usb_power_on(struct phy *phy)
/* Tx, Rx, and PCS configurations */
qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
-
- if (cfg->lanes >= 2)
- qmp_combo_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
-
qmp_combo_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
- if (cfg->lanes >= 2)
+ if (cfg->lanes >= 2) {
+ qmp_combo_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
qmp_combo_configure_lane(qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
+ }
qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 22/22] phy: qcom-qmp-combo: clean up DP callback names
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-11 8:56 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Clean up and unify the DP callbacks by dropping the redundant "qcom" and
"phy" prefix and infix and by using a common naming scheme ("qmp" +
version + callback name).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 82 +++++++++++------------
1 file changed, 41 insertions(+), 41 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 6d98d37f8562..51a03ac05c91 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -905,17 +905,17 @@ struct qmp_combo {
struct qmp_phy_dp_clks *dp_clks;
};
-static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp);
-static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp);
-static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp);
-static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp);
+static void qmp_v3_dp_aux_init(struct qmp_combo *qmp);
+static void qmp_v3_configure_dp_tx(struct qmp_combo *qmp);
+static int qmp_v3_configure_dp_phy(struct qmp_combo *qmp);
+static int qmp_v3_calibrate_dp_phy(struct qmp_combo *qmp);
-static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp);
-static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp);
-static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp);
-static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp);
+static void qmp_v4_dp_aux_init(struct qmp_combo *qmp);
+static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp);
+static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp);
+static int qmp_v4_calibrate_dp_phy(struct qmp_combo *qmp);
-static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp);
+static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp);
static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
{
@@ -995,10 +995,10 @@ static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+ .dp_aux_init = qmp_v3_dp_aux_init,
+ .configure_dp_tx = qmp_v3_configure_dp_tx,
+ .configure_dp_phy = qmp_v3_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v3_calibrate_dp_phy,
.clk_list = qmp_v3_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
@@ -1042,10 +1042,10 @@ static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+ .dp_aux_init = qmp_v3_dp_aux_init,
+ .configure_dp_tx = qmp_v3_configure_dp_tx,
+ .configure_dp_phy = qmp_v3_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v3_calibrate_dp_phy,
.clk_list = qmp_v3_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
@@ -1090,10 +1090,10 @@ static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qmp_v4_dp_aux_init,
+ .configure_dp_tx = qmp_v4_configure_dp_tx,
+ .configure_dp_phy = qmp_v4_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
@@ -1138,10 +1138,10 @@ static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v5_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qmp_v4_dp_aux_init,
+ .configure_dp_tx = qmp_v4_configure_dp_tx,
+ .configure_dp_phy = qmp_v5_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
@@ -1186,10 +1186,10 @@ static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qmp_v4_dp_aux_init,
+ .configure_dp_tx = qmp_v4_configure_dp_tx,
+ .configure_dp_phy = qmp_v4_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.clk_list = qmp_v4_sm8250_usbphy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
@@ -1262,7 +1262,7 @@ static int qmp_combo_dp_serdes_init(struct qmp_combo *qmp)
return 0;
}
-static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp)
+static void qmp_v3_dp_aux_init(struct qmp_combo *qmp)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
@@ -1343,7 +1343,7 @@ static int qmp_combo_configure_dp_swing(struct qmp_combo *qmp,
return 0;
}
-static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp)
+static void qmp_v3_configure_dp_tx(struct qmp_combo *qmp)
{
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 bias_en, drvr_en;
@@ -1396,7 +1396,7 @@ static bool qmp_combo_configure_dp_mode(struct qmp_combo *qmp)
return reverse;
}
-static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp)
+static int qmp_v3_configure_dp_phy(struct qmp_combo *qmp)
{
const struct qmp_phy_dp_clks *dp_clks = qmp->dp_clks;
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
@@ -1473,7 +1473,7 @@ static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp)
* We need to calibrate the aux setting here as many times
* as the caller tries
*/
-static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp)
+static int qmp_v3_calibrate_dp_phy(struct qmp_combo *qmp)
{
static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
u8 val;
@@ -1487,7 +1487,7 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp)
return 0;
}
-static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp)
+static void qmp_v4_dp_aux_init(struct qmp_combo *qmp)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
@@ -1514,7 +1514,7 @@ static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp)
qmp->dp_pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
}
-static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp)
+static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp)
{
/* Program default values before writing proper values */
writel(0x27, qmp->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
@@ -1527,7 +1527,7 @@ static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp)
QSERDES_V4_TX_TX_EMP_POST1_LVL);
}
-static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_combo *qmp)
+static int qmp_v45_configure_dp_phy(struct qmp_combo *qmp)
{
const struct qmp_phy_dp_clks *dp_clks = qmp->dp_clks;
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
@@ -1617,7 +1617,7 @@ static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_combo *qmp)
return 0;
}
-static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp)
+static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp)
{
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
@@ -1625,7 +1625,7 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp)
u32 status;
int ret;
- ret = qcom_qmp_v45_phy_configure_dp_phy(qmp);
+ ret = qmp_v45_configure_dp_phy(qmp);
if (ret < 0)
return ret;
@@ -1679,7 +1679,7 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp)
return 0;
}
-static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp)
+static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp)
{
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
@@ -1687,7 +1687,7 @@ static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp)
u32 status;
int ret;
- ret = qcom_qmp_v45_phy_configure_dp_phy(qmp);
+ ret = qmp_v45_configure_dp_phy(qmp);
if (ret < 0)
return ret;
@@ -1740,7 +1740,7 @@ static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp)
* We need to calibrate the aux setting here as many times
* as the caller tries
*/
-static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp)
+static int qmp_v4_calibrate_dp_phy(struct qmp_combo *qmp)
{
static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
u8 val;
--
2.37.4
^ permalink raw reply related [flat|nested] 108+ messages in thread
* [PATCH 22/22] phy: qcom-qmp-combo: clean up DP callback names
@ 2022-11-11 8:56 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-11 8:56 UTC (permalink / raw)
To: Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Dmitry Baryshkov,
linux-arm-msm, linux-phy, linux-kernel, Johan Hovold
Clean up and unify the DP callbacks by dropping the redundant "qcom" and
"phy" prefix and infix and by using a common naming scheme ("qmp" +
version + callback name).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 82 +++++++++++------------
1 file changed, 41 insertions(+), 41 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 6d98d37f8562..51a03ac05c91 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -905,17 +905,17 @@ struct qmp_combo {
struct qmp_phy_dp_clks *dp_clks;
};
-static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp);
-static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp);
-static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp);
-static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp);
+static void qmp_v3_dp_aux_init(struct qmp_combo *qmp);
+static void qmp_v3_configure_dp_tx(struct qmp_combo *qmp);
+static int qmp_v3_configure_dp_phy(struct qmp_combo *qmp);
+static int qmp_v3_calibrate_dp_phy(struct qmp_combo *qmp);
-static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp);
-static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp);
-static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp);
-static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp);
+static void qmp_v4_dp_aux_init(struct qmp_combo *qmp);
+static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp);
+static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp);
+static int qmp_v4_calibrate_dp_phy(struct qmp_combo *qmp);
-static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp);
+static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp);
static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
{
@@ -995,10 +995,10 @@ static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+ .dp_aux_init = qmp_v3_dp_aux_init,
+ .configure_dp_tx = qmp_v3_configure_dp_tx,
+ .configure_dp_phy = qmp_v3_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v3_calibrate_dp_phy,
.clk_list = qmp_v3_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
@@ -1042,10 +1042,10 @@ static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+ .dp_aux_init = qmp_v3_dp_aux_init,
+ .configure_dp_tx = qmp_v3_configure_dp_tx,
+ .configure_dp_phy = qmp_v3_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v3_calibrate_dp_phy,
.clk_list = qmp_v3_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
@@ -1090,10 +1090,10 @@ static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qmp_v4_dp_aux_init,
+ .configure_dp_tx = qmp_v4_configure_dp_tx,
+ .configure_dp_phy = qmp_v4_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
@@ -1138,10 +1138,10 @@ static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v5_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qmp_v4_dp_aux_init,
+ .configure_dp_tx = qmp_v4_configure_dp_tx,
+ .configure_dp_phy = qmp_v5_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
@@ -1186,10 +1186,10 @@ static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qmp_v4_dp_aux_init,
+ .configure_dp_tx = qmp_v4_configure_dp_tx,
+ .configure_dp_phy = qmp_v4_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
.clk_list = qmp_v4_sm8250_usbphy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
@@ -1262,7 +1262,7 @@ static int qmp_combo_dp_serdes_init(struct qmp_combo *qmp)
return 0;
}
-static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp)
+static void qmp_v3_dp_aux_init(struct qmp_combo *qmp)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
@@ -1343,7 +1343,7 @@ static int qmp_combo_configure_dp_swing(struct qmp_combo *qmp,
return 0;
}
-static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp)
+static void qmp_v3_configure_dp_tx(struct qmp_combo *qmp)
{
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 bias_en, drvr_en;
@@ -1396,7 +1396,7 @@ static bool qmp_combo_configure_dp_mode(struct qmp_combo *qmp)
return reverse;
}
-static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp)
+static int qmp_v3_configure_dp_phy(struct qmp_combo *qmp)
{
const struct qmp_phy_dp_clks *dp_clks = qmp->dp_clks;
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
@@ -1473,7 +1473,7 @@ static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp)
* We need to calibrate the aux setting here as many times
* as the caller tries
*/
-static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp)
+static int qmp_v3_calibrate_dp_phy(struct qmp_combo *qmp)
{
static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
u8 val;
@@ -1487,7 +1487,7 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp)
return 0;
}
-static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp)
+static void qmp_v4_dp_aux_init(struct qmp_combo *qmp)
{
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
@@ -1514,7 +1514,7 @@ static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp)
qmp->dp_pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
}
-static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp)
+static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp)
{
/* Program default values before writing proper values */
writel(0x27, qmp->dp_tx + QSERDES_V4_TX_TX_DRV_LVL);
@@ -1527,7 +1527,7 @@ static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp)
QSERDES_V4_TX_TX_EMP_POST1_LVL);
}
-static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_combo *qmp)
+static int qmp_v45_configure_dp_phy(struct qmp_combo *qmp)
{
const struct qmp_phy_dp_clks *dp_clks = qmp->dp_clks;
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
@@ -1617,7 +1617,7 @@ static int qcom_qmp_v45_phy_configure_dp_phy(struct qmp_combo *qmp)
return 0;
}
-static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp)
+static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp)
{
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
@@ -1625,7 +1625,7 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp)
u32 status;
int ret;
- ret = qcom_qmp_v45_phy_configure_dp_phy(qmp);
+ ret = qmp_v45_configure_dp_phy(qmp);
if (ret < 0)
return ret;
@@ -1679,7 +1679,7 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp)
return 0;
}
-static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp)
+static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp)
{
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
@@ -1687,7 +1687,7 @@ static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp)
u32 status;
int ret;
- ret = qcom_qmp_v45_phy_configure_dp_phy(qmp);
+ ret = qmp_v45_configure_dp_phy(qmp);
if (ret < 0)
return ret;
@@ -1740,7 +1740,7 @@ static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp)
* We need to calibrate the aux setting here as many times
* as the caller tries
*/
-static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp)
+static int qmp_v4_calibrate_dp_phy(struct qmp_combo *qmp)
{
static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
u8 val;
--
2.37.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 108+ messages in thread
* Re: [PATCH 01/22] phy: qcom-qmp-combo: sort device-id table
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 6:18 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:18 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Sort the device-id table by compatible string to make it easier to find
> and add new entries.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 01/22] phy: qcom-qmp-combo: sort device-id table
@ 2022-11-12 6:18 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:18 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Sort the device-id table by compatible string to make it easier to find
> and add new entries.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 02/22] phy: qcom-qmp-combo: move device-id table
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 6:18 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:18 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Move the device-id table after probe() and next to the driver structure
> to keep the driver callback functions grouped together.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 50 +++++++++++------------
> 1 file changed, 25 insertions(+), 25 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 02/22] phy: qcom-qmp-combo: move device-id table
@ 2022-11-12 6:18 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:18 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Move the device-id table after probe() and next to the driver structure
> to keep the driver callback functions grouped together.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 50 +++++++++++------------
> 1 file changed, 25 insertions(+), 25 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 03/22] phy: qcom-qmp-combo: move pm ops
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 6:19 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:19 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Move the PM ops structure next to the implementation to keep the driver
> callbacks grouped.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 03/22] phy: qcom-qmp-combo: move pm ops
@ 2022-11-12 6:19 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:19 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Move the PM ops structure next to the implementation to keep the driver
> callbacks grouped.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 04/22] phy: qcom-qmp-combo: rename PHY ops structures
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 6:19 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:19 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Rename the PHY operation structures so that they have a "phy_ops" suffix
> and move them next to the implementation.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 40 +++++++++++------------
> 1 file changed, 20 insertions(+), 20 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 04/22] phy: qcom-qmp-combo: rename PHY ops structures
@ 2022-11-12 6:19 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:19 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Rename the PHY operation structures so that they have a "phy_ops" suffix
> and move them next to the implementation.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 40 +++++++++++------------
> 1 file changed, 20 insertions(+), 20 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 05/22] phy: qcom-qmp-combo: drop unused DP PHY mode op
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 6:19 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:19 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> The set-mode operation is currently only used by the USB part of the
> PHY so drop the corresponding callback from the DP PHY ops.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 1 -
> 1 file changed, 1 deletion(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 05/22] phy: qcom-qmp-combo: drop unused DP PHY mode op
@ 2022-11-12 6:19 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:19 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> The set-mode operation is currently only used by the USB part of the
> PHY so drop the corresponding callback from the DP PHY ops.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 1 -
> 1 file changed, 1 deletion(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 06/22] phy: qcom-qmp-combo: rename USB PHY ops
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 6:20 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:20 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Add a "usb" infix to the USB PHY operation functions and name them
> after the corresponding operations (e.g. "init" rather than "enable").
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 06/22] phy: qcom-qmp-combo: rename USB PHY ops
@ 2022-11-12 6:20 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:20 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Add a "usb" infix to the USB PHY operation functions and name them
> after the corresponding operations (e.g. "init" rather than "enable").
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 07/22] phy: qcom-qmp-combo: drop unnecessary debug message
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 6:20 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:20 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Drop the unnecessary (verbose) debug message from the init PHY op.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 2 --
> 1 file changed, 2 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 07/22] phy: qcom-qmp-combo: drop unnecessary debug message
@ 2022-11-12 6:20 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:20 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Drop the unnecessary (verbose) debug message from the init PHY op.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 2 --
> 1 file changed, 2 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 08/22] phy: qcom-qmp-combo: separate USB and DP init ops
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 6:21 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:21 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Separate the USB and DP init and exit operations by calling the common
> initialisation code directly from the USB operation and adding a "dp"
> infix to the DP callbacks.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 36 ++++++++++++-----------
> 1 file changed, 19 insertions(+), 17 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 08/22] phy: qcom-qmp-combo: separate USB and DP init ops
@ 2022-11-12 6:21 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:21 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Separate the USB and DP init and exit operations by calling the common
> initialisation code directly from the USB operation and adding a "dp"
> infix to the DP callbacks.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 36 ++++++++++++-----------
> 1 file changed, 19 insertions(+), 17 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 09/22] phy: qcom-qmp-combo: rename DP PHY ops
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 6:21 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:21 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Rename the configure and calibrate DP PHY ops using the common prefix
> for consistency.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 09/22] phy: qcom-qmp-combo: rename DP PHY ops
@ 2022-11-12 6:21 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 6:21 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Rename the configure and calibrate DP PHY ops using the common prefix
> for consistency.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 10/22] phy: qcom-qmp-combo: separate USB and DP power-on ops
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:32 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:32 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Separate the USB and DP power-on and power-off operations in two
> dedicated implementations.
>
> Note that the pipe clock is only used by the USB part of the PHY and
> that no DP configuration has a pcs (or rx) table or has has_pwrdn_delay
> set.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 100 +++++++++++++---------
> 1 file changed, 59 insertions(+), 41 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 10/22] phy: qcom-qmp-combo: separate USB and DP power-on ops
@ 2022-11-12 7:32 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:32 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Separate the USB and DP power-on and power-off operations in two
> dedicated implementations.
>
> Note that the pipe clock is only used by the USB part of the PHY and
> that no DP configuration has a pcs (or rx) table or has has_pwrdn_delay
> set.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 100 +++++++++++++---------
> 1 file changed, 59 insertions(+), 41 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 14/22] phy: qcom-qmp-combo: clean up DP configurations
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:32 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:32 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> In preparation for merging the USB and DP configurations, align the
> initialisations of the DP function pointers.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 40 +++++++++++------------
> 1 file changed, 20 insertions(+), 20 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 14/22] phy: qcom-qmp-combo: clean up DP configurations
@ 2022-11-12 7:32 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:32 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> In preparation for merging the USB and DP configurations, align the
> initialisations of the DP function pointers.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 40 +++++++++++------------
> 1 file changed, 20 insertions(+), 20 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 15/22] phy: qcom-qmp-combo: rename sc8280xp config
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:33 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:33 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> In preparation for merging the USB and DP configurations, drop the
> "combo" infix from the SC8280XP combined configuration for consistency
> with the other platforms.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 15/22] phy: qcom-qmp-combo: rename sc8280xp config
@ 2022-11-12 7:33 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:33 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> In preparation for merging the USB and DP configurations, drop the
> "combo" infix from the SC8280XP combined configuration for consistency
> with the other platforms.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 11/22] phy: qcom-qmp-combo: clean up serdes initialisation
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:33 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:33 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Clean up serdes initialisation somewhat by making the current helper a
> dedicated helper for the DP part of the PHY.
>
> Note that no error is currently returned for non-supported link rates.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 49 +++++++++++------------
> 1 file changed, 24 insertions(+), 25 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 11/22] phy: qcom-qmp-combo: clean up serdes initialisation
@ 2022-11-12 7:33 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:33 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Clean up serdes initialisation somewhat by making the current helper a
> dedicated helper for the DP part of the PHY.
>
> Note that no error is currently returned for non-supported link rates.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 49 +++++++++++------------
> 1 file changed, 24 insertions(+), 25 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 13/22] phy: qcom-qmp-combo: add dedicated DP iomem pointers
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:36 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:36 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> In preparation for merging the driver data, add separate iomem pointers
> for the DP part of the PHY.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 246 +++++++++++-----------
> 1 file changed, 126 insertions(+), 120 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 13/22] phy: qcom-qmp-combo: add dedicated DP iomem pointers
@ 2022-11-12 7:36 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:36 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> In preparation for merging the driver data, add separate iomem pointers
> for the DP part of the PHY.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 246 +++++++++++-----------
> 1 file changed, 126 insertions(+), 120 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 16/22] phy: qcom-qmp-combo: add DP configuration tables
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:39 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:39 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> In preparation for merging the USB and DP configurations, add dedicated
> pointers for the DP serdes and tx tables to the configurations.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 45 ++++++++++++-----------
> 1 file changed, 24 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 499368e19e00..b27d1821116c 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -816,6 +816,11 @@ struct qmp_phy_cfg {
> const struct qmp_phy_init_tbl *pcs_usb_tbl;
> int pcs_usb_tbl_num;
>
> + const struct qmp_phy_init_tbl *dp_serdes_tbl;
> + int dp_serdes_tbl_num;
> + const struct qmp_phy_init_tbl *dp_tx_tbl;
> + int dp_tx_tbl_num;
> +
I'd prefer to have DP-specific instance of struct qmp_phy_cfg_tbls here
instead of having separate dp-specific fields. WDYT?
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 16/22] phy: qcom-qmp-combo: add DP configuration tables
@ 2022-11-12 7:39 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:39 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> In preparation for merging the USB and DP configurations, add dedicated
> pointers for the DP serdes and tx tables to the configurations.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 45 ++++++++++++-----------
> 1 file changed, 24 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 499368e19e00..b27d1821116c 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -816,6 +816,11 @@ struct qmp_phy_cfg {
> const struct qmp_phy_init_tbl *pcs_usb_tbl;
> int pcs_usb_tbl_num;
>
> + const struct qmp_phy_init_tbl *dp_serdes_tbl;
> + int dp_serdes_tbl_num;
> + const struct qmp_phy_init_tbl *dp_tx_tbl;
> + int dp_tx_tbl_num;
> +
I'd prefer to have DP-specific instance of struct qmp_phy_cfg_tbls here
instead of having separate dp-specific fields. WDYT?
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:43 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:43 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> It does not really make any sense to keep separate configuration
> structures for the USB and DP parts of the same PHY so merge them.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++---------------
> 1 file changed, 57 insertions(+), 125 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index b27d1821116c..249912b75964 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -798,10 +798,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
>
> struct qmp_phy;
>
> -/* struct qmp_phy_cfg - per-PHY initialization config */
> struct qmp_phy_cfg {
> - /* phy-type - PCIE/UFS/USB */
> - unsigned int type;
> int lanes;
int lanes doesn't really make sense here in my opinion. It should be
usb_lanes and dp_lanes.
>
> /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
> @@ -864,11 +861,6 @@ struct qmp_phy_cfg {
>
> };
>
> -struct qmp_phy_combo_cfg {
> - const struct qmp_phy_cfg *usb_cfg;
> - const struct qmp_phy_cfg *dp_cfg;
> -};
> -
> /**
> * struct qmp_phy - per-lane phy descriptor
> *
> @@ -1008,8 +1000,7 @@ static const char * const sc7180_usb3phy_reset_l[] = {
> "phy",
> };
>
> -static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> - .type = PHY_TYPE_USB3,
> +static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
> .lanes = 2,
>
> .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> @@ -1020,20 +1011,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> - .clk_list = qmp_v3_phy_clk_l,
> - .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> - .reset_list = sc7180_usb3phy_reset_l,
> - .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> - .regs = qmp_v3_usb3phy_regs_layout,
> -
> - .has_pwrdn_delay = true,
> -};
> -
> -static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
> - .type = PHY_TYPE_DP,
> - .lanes = 2,
>
> .dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
> .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> @@ -1058,15 +1035,19 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
> .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
> .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
> -};
>
> -static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
> - .usb_cfg = &sc7180_usb3phy_cfg,
> - .dp_cfg = &sc7180_dpphy_cfg,
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .has_pwrdn_delay = true,
> };
>
> -static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
> - .type = PHY_TYPE_USB3,
> +static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = {
> .lanes = 2,
>
> .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> @@ -1077,25 +1058,11 @@ static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
> .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> - .clk_list = qmp_v3_phy_clk_l,
> - .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> - .reset_list = msm8996_usb3phy_reset_l,
> - .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> - .regs = qmp_v3_usb3phy_regs_layout,
> -
> - .has_pwrdn_delay = true,
> -};
>
> -static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
> - .type = PHY_TYPE_DP,
> - .lanes = 2,
> -
> - .serdes_tbl = qmp_v3_dp_serdes_tbl,
> - .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> - .tx_tbl = qmp_v3_dp_tx_tbl,
> - .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
> + .dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
> + .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> + .dp_tx_tbl = qmp_v3_dp_tx_tbl,
> + .dp_tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
>
> .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
> .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
> @@ -1115,15 +1082,18 @@ static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
> .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
> .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
> -};
>
> -static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
> - .usb_cfg = &sdm845_usb3phy_cfg,
> - .dp_cfg = &sdm845_dpphy_cfg,
> -};
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
>
> -static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> - .type = PHY_TYPE_USB3,
> + .has_pwrdn_delay = true,
> +};
> +static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
> .lanes = 2,
>
> .serdes_tbl = sm8150_usb3_serdes_tbl,
> @@ -1136,21 +1106,6 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
> .pcs_usb_tbl = sm8150_usb3_pcs_usb_tbl,
> .pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl),
> - .clk_list = qmp_v4_phy_clk_l,
> - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> - .reset_list = msm8996_usb3phy_reset_l,
> - .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> - .regs = qmp_v4_usb3phy_regs_layout,
> - .pcs_usb_offset = 0x300,
> -
> - .has_pwrdn_delay = true,
> -};
> -
> -static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
> - .type = PHY_TYPE_DP,
> - .lanes = 2,
>
> .dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
> .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> @@ -1175,15 +1130,20 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
> .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> -};
>
> -static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
> - .usb_cfg = &sm8150_usb3phy_cfg,
> - .dp_cfg = &sc8180x_dpphy_cfg,
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> + .pcs_usb_offset = 0x300,
> +
> + .has_pwrdn_delay = true,
> };
>
> -static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
> - .type = PHY_TYPE_USB3,
> +static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
> .lanes = 2,
>
> .serdes_tbl = sc8280xp_usb43dp_serdes_tbl,
> @@ -1194,19 +1154,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
> .rx_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_rx_tbl),
> .pcs_tbl = sc8280xp_usb43dp_pcs_tbl,
> .pcs_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_pcs_tbl),
> - .clk_list = qmp_v4_phy_clk_l,
> - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> - .reset_list = msm8996_usb3phy_reset_l,
> - .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> - .regs = qmp_v4_usb3phy_regs_layout,
> - .pcs_usb_offset = 0x300,
> -};
> -
> -static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
> - .type = PHY_TYPE_DP,
> - .lanes = 2,
>
> .dp_serdes_tbl = qmp_v5_dp_serdes_tbl,
> .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v5_dp_serdes_tbl),
> @@ -1231,15 +1178,18 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
> .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
> .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> -};
>
> -static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_cfg = {
> - .usb_cfg = &sc8280xp_usb43dp_usb_cfg,
> - .dp_cfg = &sc8280xp_usb43dp_dp_cfg,
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> + .pcs_usb_offset = 0x300,
> };
>
> -static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> - .type = PHY_TYPE_USB3,
> +static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
> .lanes = 2,
>
> .serdes_tbl = sm8150_usb3_serdes_tbl,
> @@ -1252,21 +1202,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
> .pcs_usb_tbl = sm8250_usb3_pcs_usb_tbl,
> .pcs_usb_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_usb_tbl),
> - .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> - .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> - .reset_list = msm8996_usb3phy_reset_l,
> - .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> - .regs = qmp_v4_usb3phy_regs_layout,
> - .pcs_usb_offset = 0x300,
> -
> - .has_pwrdn_delay = true,
> -};
> -
> -static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> - .type = PHY_TYPE_DP,
> - .lanes = 2,
>
> .dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
> .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> @@ -1291,11 +1226,17 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> -};
>
> -static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
> - .usb_cfg = &sm8250_usb3phy_cfg,
> - .dp_cfg = &sm8250_dpphy_cfg,
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> + .pcs_usb_offset = 0x300,
> +
> + .has_pwrdn_delay = true,
> };
>
> static void qmp_combo_configure_lane(void __iomem *base,
> @@ -2720,10 +2661,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
> void __iomem *serdes;
> void __iomem *usb_serdes;
> void __iomem *dp_serdes = NULL;
> - const struct qmp_phy_combo_cfg *combo_cfg = NULL;
> const struct qmp_phy_cfg *cfg = NULL;
> - const struct qmp_phy_cfg *usb_cfg = NULL;
> - const struct qmp_phy_cfg *dp_cfg = NULL;
> int num, id, expected_phys;
> int ret;
>
> @@ -2734,13 +2672,10 @@ static int qmp_combo_probe(struct platform_device *pdev)
> qmp->dev = dev;
> dev_set_drvdata(dev, qmp);
>
> - combo_cfg = of_device_get_match_data(dev);
> - if (!combo_cfg)
> + cfg = of_device_get_match_data(dev);
> + if (!cfg)
> return -EINVAL;
>
> - usb_cfg = combo_cfg->usb_cfg;
> - cfg = usb_cfg; /* Setup clks and regulators */
> -
> usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
> if (IS_ERR(serdes))
> return PTR_ERR(serdes);
> @@ -2753,7 +2688,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
> if (IS_ERR(dp_serdes))
> return PTR_ERR(dp_serdes);
>
> - dp_cfg = combo_cfg->dp_cfg;
> expected_phys = 2;
>
> mutex_init(&qmp->phy_mutex);
> @@ -2792,7 +2726,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
> id = 0;
> for_each_available_child_of_node(dev->of_node, child) {
> if (of_node_name_eq(child, "dp-phy")) {
> - cfg = dp_cfg;
> serdes = dp_serdes;
>
> /* Create per-lane phy */
> @@ -2810,7 +2743,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
> goto err_node_put;
> }
> } else if (of_node_name_eq(child, "usb3-phy")) {
> - cfg = usb_cfg;
> serdes = usb_serdes;
>
> /* Create per-lane phy */
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
@ 2022-11-12 7:43 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:43 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> It does not really make any sense to keep separate configuration
> structures for the USB and DP parts of the same PHY so merge them.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++---------------
> 1 file changed, 57 insertions(+), 125 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index b27d1821116c..249912b75964 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -798,10 +798,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
>
> struct qmp_phy;
>
> -/* struct qmp_phy_cfg - per-PHY initialization config */
> struct qmp_phy_cfg {
> - /* phy-type - PCIE/UFS/USB */
> - unsigned int type;
> int lanes;
int lanes doesn't really make sense here in my opinion. It should be
usb_lanes and dp_lanes.
>
> /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
> @@ -864,11 +861,6 @@ struct qmp_phy_cfg {
>
> };
>
> -struct qmp_phy_combo_cfg {
> - const struct qmp_phy_cfg *usb_cfg;
> - const struct qmp_phy_cfg *dp_cfg;
> -};
> -
> /**
> * struct qmp_phy - per-lane phy descriptor
> *
> @@ -1008,8 +1000,7 @@ static const char * const sc7180_usb3phy_reset_l[] = {
> "phy",
> };
>
> -static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> - .type = PHY_TYPE_USB3,
> +static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
> .lanes = 2,
>
> .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> @@ -1020,20 +1011,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> - .clk_list = qmp_v3_phy_clk_l,
> - .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> - .reset_list = sc7180_usb3phy_reset_l,
> - .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> - .regs = qmp_v3_usb3phy_regs_layout,
> -
> - .has_pwrdn_delay = true,
> -};
> -
> -static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
> - .type = PHY_TYPE_DP,
> - .lanes = 2,
>
> .dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
> .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> @@ -1058,15 +1035,19 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
> .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
> .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
> -};
>
> -static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
> - .usb_cfg = &sc7180_usb3phy_cfg,
> - .dp_cfg = &sc7180_dpphy_cfg,
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = sc7180_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
> +
> + .has_pwrdn_delay = true,
> };
>
> -static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
> - .type = PHY_TYPE_USB3,
> +static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = {
> .lanes = 2,
>
> .serdes_tbl = qmp_v3_usb3_serdes_tbl,
> @@ -1077,25 +1058,11 @@ static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
> .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> .pcs_tbl = qmp_v3_usb3_pcs_tbl,
> .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> - .clk_list = qmp_v3_phy_clk_l,
> - .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> - .reset_list = msm8996_usb3phy_reset_l,
> - .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> - .regs = qmp_v3_usb3phy_regs_layout,
> -
> - .has_pwrdn_delay = true,
> -};
>
> -static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
> - .type = PHY_TYPE_DP,
> - .lanes = 2,
> -
> - .serdes_tbl = qmp_v3_dp_serdes_tbl,
> - .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> - .tx_tbl = qmp_v3_dp_tx_tbl,
> - .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
> + .dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
> + .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
> + .dp_tx_tbl = qmp_v3_dp_tx_tbl,
> + .dp_tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
>
> .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
> .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
> @@ -1115,15 +1082,18 @@ static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
> .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
> .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
> -};
>
> -static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
> - .usb_cfg = &sdm845_usb3phy_cfg,
> - .dp_cfg = &sdm845_dpphy_cfg,
> -};
> + .clk_list = qmp_v3_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v3_usb3phy_regs_layout,
>
> -static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> - .type = PHY_TYPE_USB3,
> + .has_pwrdn_delay = true,
> +};
> +static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
> .lanes = 2,
>
> .serdes_tbl = sm8150_usb3_serdes_tbl,
> @@ -1136,21 +1106,6 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
> .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
> .pcs_usb_tbl = sm8150_usb3_pcs_usb_tbl,
> .pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl),
> - .clk_list = qmp_v4_phy_clk_l,
> - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> - .reset_list = msm8996_usb3phy_reset_l,
> - .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> - .regs = qmp_v4_usb3phy_regs_layout,
> - .pcs_usb_offset = 0x300,
> -
> - .has_pwrdn_delay = true,
> -};
> -
> -static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
> - .type = PHY_TYPE_DP,
> - .lanes = 2,
>
> .dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
> .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> @@ -1175,15 +1130,20 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
> .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> -};
>
> -static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
> - .usb_cfg = &sm8150_usb3phy_cfg,
> - .dp_cfg = &sc8180x_dpphy_cfg,
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> + .pcs_usb_offset = 0x300,
> +
> + .has_pwrdn_delay = true,
> };
>
> -static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
> - .type = PHY_TYPE_USB3,
> +static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
> .lanes = 2,
>
> .serdes_tbl = sc8280xp_usb43dp_serdes_tbl,
> @@ -1194,19 +1154,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
> .rx_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_rx_tbl),
> .pcs_tbl = sc8280xp_usb43dp_pcs_tbl,
> .pcs_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_pcs_tbl),
> - .clk_list = qmp_v4_phy_clk_l,
> - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> - .reset_list = msm8996_usb3phy_reset_l,
> - .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> - .regs = qmp_v4_usb3phy_regs_layout,
> - .pcs_usb_offset = 0x300,
> -};
> -
> -static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
> - .type = PHY_TYPE_DP,
> - .lanes = 2,
>
> .dp_serdes_tbl = qmp_v5_dp_serdes_tbl,
> .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v5_dp_serdes_tbl),
> @@ -1231,15 +1178,18 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
> .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
> .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> -};
>
> -static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_cfg = {
> - .usb_cfg = &sc8280xp_usb43dp_usb_cfg,
> - .dp_cfg = &sc8280xp_usb43dp_dp_cfg,
> + .clk_list = qmp_v4_phy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> + .pcs_usb_offset = 0x300,
> };
>
> -static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> - .type = PHY_TYPE_USB3,
> +static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
> .lanes = 2,
>
> .serdes_tbl = sm8150_usb3_serdes_tbl,
> @@ -1252,21 +1202,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
> .pcs_usb_tbl = sm8250_usb3_pcs_usb_tbl,
> .pcs_usb_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_usb_tbl),
> - .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> - .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> - .reset_list = msm8996_usb3phy_reset_l,
> - .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> - .regs = qmp_v4_usb3phy_regs_layout,
> - .pcs_usb_offset = 0x300,
> -
> - .has_pwrdn_delay = true,
> -};
> -
> -static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> - .type = PHY_TYPE_DP,
> - .lanes = 2,
>
> .dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
> .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
> @@ -1291,11 +1226,17 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
> .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
> .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
> -};
>
> -static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
> - .usb_cfg = &sm8250_usb3phy_cfg,
> - .dp_cfg = &sm8250_dpphy_cfg,
> + .clk_list = qmp_v4_sm8250_usbphy_clk_l,
> + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
> + .reset_list = msm8996_usb3phy_reset_l,
> + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> + .vreg_list = qmp_phy_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .regs = qmp_v4_usb3phy_regs_layout,
> + .pcs_usb_offset = 0x300,
> +
> + .has_pwrdn_delay = true,
> };
>
> static void qmp_combo_configure_lane(void __iomem *base,
> @@ -2720,10 +2661,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
> void __iomem *serdes;
> void __iomem *usb_serdes;
> void __iomem *dp_serdes = NULL;
> - const struct qmp_phy_combo_cfg *combo_cfg = NULL;
> const struct qmp_phy_cfg *cfg = NULL;
> - const struct qmp_phy_cfg *usb_cfg = NULL;
> - const struct qmp_phy_cfg *dp_cfg = NULL;
> int num, id, expected_phys;
> int ret;
>
> @@ -2734,13 +2672,10 @@ static int qmp_combo_probe(struct platform_device *pdev)
> qmp->dev = dev;
> dev_set_drvdata(dev, qmp);
>
> - combo_cfg = of_device_get_match_data(dev);
> - if (!combo_cfg)
> + cfg = of_device_get_match_data(dev);
> + if (!cfg)
> return -EINVAL;
>
> - usb_cfg = combo_cfg->usb_cfg;
> - cfg = usb_cfg; /* Setup clks and regulators */
> -
> usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
> if (IS_ERR(serdes))
> return PTR_ERR(serdes);
> @@ -2753,7 +2688,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
> if (IS_ERR(dp_serdes))
> return PTR_ERR(dp_serdes);
>
> - dp_cfg = combo_cfg->dp_cfg;
> expected_phys = 2;
>
> mutex_init(&qmp->phy_mutex);
> @@ -2792,7 +2726,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
> id = 0;
> for_each_available_child_of_node(dev->of_node, child) {
> if (of_node_name_eq(child, "dp-phy")) {
> - cfg = dp_cfg;
> serdes = dp_serdes;
>
> /* Create per-lane phy */
> @@ -2810,7 +2743,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
> goto err_node_put;
> }
> } else if (of_node_name_eq(child, "usb3-phy")) {
> - cfg = usb_cfg;
> serdes = usb_serdes;
>
> /* Create per-lane phy */
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 18/22] phy: qcom-qmp-combo: merge driver data
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:46 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:46 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> The QMP combo driver manages a single PHY (even if it provides two
> interfaces for USB and DP, respectively) so merge the old qcom_qmp and
> qmp_phy structures and drop the PHY array.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 690 ++++++++++------------
> 1 file changed, 313 insertions(+), 377 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 249912b75964..43b7ea5d2edc 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -796,7 +796,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
> { 0x3f, 0xff, 0xff, 0xff }
> };
>
> -struct qmp_phy;
> +struct qmp_combo;
>
> struct qmp_phy_cfg {
> int lanes;
> @@ -835,10 +835,10 @@ struct qmp_phy_cfg {
> const u8 (*pre_emphasis_hbr3_hbr2)[4][4];
>
> /* DP PHY callbacks */
> - int (*configure_dp_phy)(struct qmp_phy *qphy);
> - void (*configure_dp_tx)(struct qmp_phy *qphy);
> - int (*calibrate_dp_phy)(struct qmp_phy *qphy);
> - void (*dp_aux_init)(struct qmp_phy *qphy);
> + int (*configure_dp_phy)(struct qmp_combo *qmp);
> + void (*configure_dp_tx)(struct qmp_combo *qmp);
> + int (*calibrate_dp_phy)(struct qmp_combo *qmp);
> + void (*dp_aux_init)(struct qmp_combo *qmp);
>
> /* clock ids to be requested */
> const char * const *clk_list;
> @@ -861,29 +861,19 @@ struct qmp_phy_cfg {
>
> };
>
> -/**
> - * struct qmp_phy - per-lane phy descriptor
> - *
> - * @phy: generic phy
> - * @cfg: phy specific configuration
> - * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
> - * @tx: iomapped memory space for lane's tx
> - * @rx: iomapped memory space for lane's rx
> - * @pcs: iomapped memory space for lane's pcs
> - * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
> - * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> - * @pcs_misc: iomapped memory space for lane's pcs_misc
> - * @pcs_usb: iomapped memory space for lane's pcs_usb
> - * @pipe_clk: pipe clock
> - * @qmp: QMP phy to which this lane belongs
> - * @mode: current PHY mode
> - * @dp_aux_cfg: Display port aux config
> - * @dp_opts: Display port optional config
> - * @dp_clks: Display port clocks
> - */
> -struct qmp_phy {
> - struct phy *phy;
> +struct qmp_phy_dp_clks {
> + struct qmp_combo *qmp;
> + struct clk_hw dp_link_hw;
> + struct clk_hw dp_pixel_hw;
> +};
> +
It would make sense to keep the kerneldoc here.
> +struct qmp_combo {
> + struct device *dev;
> +
> const struct qmp_phy_cfg *cfg;
> +
> + void __iomem *dp_com;
> +
> void __iomem *serdes;
> void __iomem *tx;
> void __iomem *rx;
> @@ -899,59 +889,33 @@ struct qmp_phy {
> void __iomem *dp_pcs;
>
> struct clk *pipe_clk;
> - struct qcom_qmp *qmp;
> - enum phy_mode mode;
> - unsigned int dp_aux_cfg;
> - struct phy_configure_opts_dp dp_opts;
> - struct qmp_phy_dp_clks *dp_clks;
> -};
> -
> -struct qmp_phy_dp_clks {
> - struct qmp_phy *qphy;
> - struct clk_hw dp_link_hw;
> - struct clk_hw dp_pixel_hw;
> -};
> -
> -/**
> - * struct qcom_qmp - structure holding QMP phy block attributes
> - *
> - * @dev: device
> - * @dp_com: iomapped memory space for phy's dp_com control block
> - *
> - * @clks: array of clocks required by phy
> - * @resets: array of resets required by phy
> - * @vregs: regulator supplies bulk data
> - *
> - * @phys: array of per-lane phy descriptors
> - * @phy_mutex: mutex lock for PHY common block initialization
> - * @init_count: phy common block initialization count
> - */
> -struct qcom_qmp {
> - struct device *dev;
> - void __iomem *dp_com;
> -
> struct clk_bulk_data *clks;
> struct reset_control_bulk_data *resets;
> struct regulator_bulk_data *vregs;
>
> - struct qmp_phy **phys;
> - struct qmp_phy *usb_phy;
> -
> struct mutex phy_mutex;
> int init_count;
> +
> + struct phy *usb_phy;
> + enum phy_mode mode;
> +
> + struct phy *dp_phy;
> + unsigned int dp_aux_cfg;
> + struct phy_configure_opts_dp dp_opts;
> + struct qmp_phy_dp_clks *dp_clks;
> };
>
> -static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
> -static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
> -static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
> -static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp);
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp);
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp);
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp);
>
> -static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
> -static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
> -static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
> -static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp);
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp);
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp);
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp);
>
> -static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy);
> +static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp);
As you are doing the cleanup anyway, would it make sense to move these
functions up to be able to drop these prototypes?
>
> static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> {
> @@ -1265,11 +1229,11 @@ static void qmp_combo_configure(void __iomem *base,
The rest LGTM
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 18/22] phy: qcom-qmp-combo: merge driver data
@ 2022-11-12 7:46 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:46 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> The QMP combo driver manages a single PHY (even if it provides two
> interfaces for USB and DP, respectively) so merge the old qcom_qmp and
> qmp_phy structures and drop the PHY array.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 690 ++++++++++------------
> 1 file changed, 313 insertions(+), 377 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 249912b75964..43b7ea5d2edc 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -796,7 +796,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
> { 0x3f, 0xff, 0xff, 0xff }
> };
>
> -struct qmp_phy;
> +struct qmp_combo;
>
> struct qmp_phy_cfg {
> int lanes;
> @@ -835,10 +835,10 @@ struct qmp_phy_cfg {
> const u8 (*pre_emphasis_hbr3_hbr2)[4][4];
>
> /* DP PHY callbacks */
> - int (*configure_dp_phy)(struct qmp_phy *qphy);
> - void (*configure_dp_tx)(struct qmp_phy *qphy);
> - int (*calibrate_dp_phy)(struct qmp_phy *qphy);
> - void (*dp_aux_init)(struct qmp_phy *qphy);
> + int (*configure_dp_phy)(struct qmp_combo *qmp);
> + void (*configure_dp_tx)(struct qmp_combo *qmp);
> + int (*calibrate_dp_phy)(struct qmp_combo *qmp);
> + void (*dp_aux_init)(struct qmp_combo *qmp);
>
> /* clock ids to be requested */
> const char * const *clk_list;
> @@ -861,29 +861,19 @@ struct qmp_phy_cfg {
>
> };
>
> -/**
> - * struct qmp_phy - per-lane phy descriptor
> - *
> - * @phy: generic phy
> - * @cfg: phy specific configuration
> - * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
> - * @tx: iomapped memory space for lane's tx
> - * @rx: iomapped memory space for lane's rx
> - * @pcs: iomapped memory space for lane's pcs
> - * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
> - * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> - * @pcs_misc: iomapped memory space for lane's pcs_misc
> - * @pcs_usb: iomapped memory space for lane's pcs_usb
> - * @pipe_clk: pipe clock
> - * @qmp: QMP phy to which this lane belongs
> - * @mode: current PHY mode
> - * @dp_aux_cfg: Display port aux config
> - * @dp_opts: Display port optional config
> - * @dp_clks: Display port clocks
> - */
> -struct qmp_phy {
> - struct phy *phy;
> +struct qmp_phy_dp_clks {
> + struct qmp_combo *qmp;
> + struct clk_hw dp_link_hw;
> + struct clk_hw dp_pixel_hw;
> +};
> +
It would make sense to keep the kerneldoc here.
> +struct qmp_combo {
> + struct device *dev;
> +
> const struct qmp_phy_cfg *cfg;
> +
> + void __iomem *dp_com;
> +
> void __iomem *serdes;
> void __iomem *tx;
> void __iomem *rx;
> @@ -899,59 +889,33 @@ struct qmp_phy {
> void __iomem *dp_pcs;
>
> struct clk *pipe_clk;
> - struct qcom_qmp *qmp;
> - enum phy_mode mode;
> - unsigned int dp_aux_cfg;
> - struct phy_configure_opts_dp dp_opts;
> - struct qmp_phy_dp_clks *dp_clks;
> -};
> -
> -struct qmp_phy_dp_clks {
> - struct qmp_phy *qphy;
> - struct clk_hw dp_link_hw;
> - struct clk_hw dp_pixel_hw;
> -};
> -
> -/**
> - * struct qcom_qmp - structure holding QMP phy block attributes
> - *
> - * @dev: device
> - * @dp_com: iomapped memory space for phy's dp_com control block
> - *
> - * @clks: array of clocks required by phy
> - * @resets: array of resets required by phy
> - * @vregs: regulator supplies bulk data
> - *
> - * @phys: array of per-lane phy descriptors
> - * @phy_mutex: mutex lock for PHY common block initialization
> - * @init_count: phy common block initialization count
> - */
> -struct qcom_qmp {
> - struct device *dev;
> - void __iomem *dp_com;
> -
> struct clk_bulk_data *clks;
> struct reset_control_bulk_data *resets;
> struct regulator_bulk_data *vregs;
>
> - struct qmp_phy **phys;
> - struct qmp_phy *usb_phy;
> -
> struct mutex phy_mutex;
> int init_count;
> +
> + struct phy *usb_phy;
> + enum phy_mode mode;
> +
> + struct phy *dp_phy;
> + unsigned int dp_aux_cfg;
> + struct phy_configure_opts_dp dp_opts;
> + struct qmp_phy_dp_clks *dp_clks;
> };
>
> -static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
> -static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
> -static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
> -static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp);
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp);
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp);
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp);
>
> -static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
> -static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
> -static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
> -static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
> +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp);
> +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp);
> +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp);
> +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp);
>
> -static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy);
> +static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp);
As you are doing the cleanup anyway, would it make sense to move these
functions up to be able to drop these prototypes?
>
> static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> {
> @@ -1265,11 +1229,11 @@ static void qmp_combo_configure(void __iomem *base,
The rest LGTM
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 19/22] phy: qcom-qmp-combo: clean up device-tree parsing
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:48 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:48 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Since the QMP driver split there will be precisely two child nodes so
> drop the obsolete iteration construct.
>
> While at it, drop the verbose error logging that would have been printed
> also on probe deferrals.
>
> Note that there is no need to check if there are additional child nodes
> (the kernel is not a devicetree validator), but let's return an error if
> either child node is missing.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 82 ++++++++---------------
> 1 file changed, 28 insertions(+), 54 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 19/22] phy: qcom-qmp-combo: clean up device-tree parsing
@ 2022-11-12 7:48 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:48 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Since the QMP driver split there will be precisely two child nodes so
> drop the obsolete iteration construct.
>
> While at it, drop the verbose error logging that would have been printed
> also on probe deferrals.
>
> Note that there is no need to check if there are additional child nodes
> (the kernel is not a devicetree validator), but let's return an error if
> either child node is missing.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 82 ++++++++---------------
> 1 file changed, 28 insertions(+), 54 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 20/22] phy: qcom-qmp-combo: clean up probe initialisation
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:48 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:48 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Stop abusing the driver data pointer and instead pass the driver state
> structure directly to the initialisation helpers during probe.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 62 ++++++++++-------------
> 1 file changed, 28 insertions(+), 34 deletions(-)
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 20/22] phy: qcom-qmp-combo: clean up probe initialisation
@ 2022-11-12 7:48 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:48 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Stop abusing the driver data pointer and instead pass the driver state
> structure directly to the initialisation helpers during probe.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 62 ++++++++++-------------
> 1 file changed, 28 insertions(+), 34 deletions(-)
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 21/22] phy: qcom-qmp-combo: clean up PHY init
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:49 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:49 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Clean up the USB PHY initialisation somewhat by programming both tx and
> rx for the second lane after the first lane.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 +++-----
> 1 file changed, 3 insertions(+), 5 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 21/22] phy: qcom-qmp-combo: clean up PHY init
@ 2022-11-12 7:49 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:49 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Clean up the USB PHY initialisation somewhat by programming both tx and
> rx for the second lane after the first lane.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 +++-----
> 1 file changed, 3 insertions(+), 5 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 22/22] phy: qcom-qmp-combo: clean up DP callback names
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:49 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:49 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Clean up and unify the DP callbacks by dropping the redundant "qcom" and
> "phy" prefix and infix and by using a common naming scheme ("qmp" +
> version + callback name).
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 82 +++++++++++------------
> 1 file changed, 41 insertions(+), 41 deletions(-)
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 22/22] phy: qcom-qmp-combo: clean up DP callback names
@ 2022-11-12 7:49 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:49 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Clean up and unify the DP callbacks by dropping the redundant "qcom" and
> "phy" prefix and infix and by using a common naming scheme ("qmp" +
> version + callback name).
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 82 +++++++++++------------
> 1 file changed, 41 insertions(+), 41 deletions(-)
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 12/22] phy: qcom-qmp-combo: separate USB and DP devicetree parsing
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-12 7:50 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:50 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Separate the devicetree parsing of the USB and DP child nodes in two
> dedicated helpers in preparation for merging the driver data.
>
> Note that only the USB part of the PHY has a pipe clock and that the DP
> implementation only uses the tx/tx2 and pcs register regions.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 81 ++++++++++++++++-------
> 1 file changed, 58 insertions(+), 23 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 12/22] phy: qcom-qmp-combo: separate USB and DP devicetree parsing
@ 2022-11-12 7:50 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-12 7:50 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> Separate the devicetree parsing of the USB and DP child nodes in two
> dedicated helpers in preparation for merging the driver data.
>
> Note that only the USB part of the PHY has a pipe clock and that the DP
> implementation only uses the tx/tx2 and pcs register regions.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 81 ++++++++++++++++-------
> 1 file changed, 58 insertions(+), 23 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 16/22] phy: qcom-qmp-combo: add DP configuration tables
2022-11-12 7:39 ` Dmitry Baryshkov
@ 2022-11-14 8:38 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-14 8:38 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On Sat, Nov 12, 2022 at 10:39:12AM +0300, Dmitry Baryshkov wrote:
> On 11/11/2022 11:56, Johan Hovold wrote:
> > In preparation for merging the USB and DP configurations, add dedicated
> > pointers for the DP serdes and tx tables to the configurations.
> >
> > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > ---
> > drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 45 ++++++++++++-----------
> > 1 file changed, 24 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > index 499368e19e00..b27d1821116c 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > @@ -816,6 +816,11 @@ struct qmp_phy_cfg {
> > const struct qmp_phy_init_tbl *pcs_usb_tbl;
> > int pcs_usb_tbl_num;
> >
> > + const struct qmp_phy_init_tbl *dp_serdes_tbl;
> > + int dp_serdes_tbl_num;
> > + const struct qmp_phy_init_tbl *dp_tx_tbl;
> > + int dp_tx_tbl_num;
> > +
>
> I'd prefer to have DP-specific instance of struct qmp_phy_cfg_tbls here
> instead of having separate dp-specific fields. WDYT?
No, I don't see any good reason for doing so currently.
You may be able to share a few pointers between some of the SoCs but
only until it turns out they need to override certain sequences anyway
(e.g. sc8280xp which mixes v4 and v5 tables currently).
You'd also need dedicated aggregate table structs for USB and DP and it
seems all of this would just make things more opaque for little gain.
Johan
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 16/22] phy: qcom-qmp-combo: add DP configuration tables
@ 2022-11-14 8:38 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-14 8:38 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On Sat, Nov 12, 2022 at 10:39:12AM +0300, Dmitry Baryshkov wrote:
> On 11/11/2022 11:56, Johan Hovold wrote:
> > In preparation for merging the USB and DP configurations, add dedicated
> > pointers for the DP serdes and tx tables to the configurations.
> >
> > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > ---
> > drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 45 ++++++++++++-----------
> > 1 file changed, 24 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > index 499368e19e00..b27d1821116c 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > @@ -816,6 +816,11 @@ struct qmp_phy_cfg {
> > const struct qmp_phy_init_tbl *pcs_usb_tbl;
> > int pcs_usb_tbl_num;
> >
> > + const struct qmp_phy_init_tbl *dp_serdes_tbl;
> > + int dp_serdes_tbl_num;
> > + const struct qmp_phy_init_tbl *dp_tx_tbl;
> > + int dp_tx_tbl_num;
> > +
>
> I'd prefer to have DP-specific instance of struct qmp_phy_cfg_tbls here
> instead of having separate dp-specific fields. WDYT?
No, I don't see any good reason for doing so currently.
You may be able to share a few pointers between some of the SoCs but
only until it turns out they need to override certain sequences anyway
(e.g. sc8280xp which mixes v4 and v5 tables currently).
You'd also need dedicated aggregate table structs for USB and DP and it
seems all of this would just make things more opaque for little gain.
Johan
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
2022-11-12 7:43 ` Dmitry Baryshkov
@ 2022-11-14 8:54 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-14 8:54 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On Sat, Nov 12, 2022 at 10:43:14AM +0300, Dmitry Baryshkov wrote:
> On 11/11/2022 11:56, Johan Hovold wrote:
> > It does not really make any sense to keep separate configuration
> > structures for the USB and DP parts of the same PHY so merge them.
> >
> > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > ---
> > drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++---------------
> > 1 file changed, 57 insertions(+), 125 deletions(-)
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > index b27d1821116c..249912b75964 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > @@ -798,10 +798,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
> >
> > struct qmp_phy;
> >
> > -/* struct qmp_phy_cfg - per-PHY initialization config */
> > struct qmp_phy_cfg {
> > - /* phy-type - PCIE/UFS/USB */
> > - unsigned int type;
> > int lanes;
>
> int lanes doesn't really make sense here in my opinion. It should be
> usb_lanes and dp_lanes.
It doesn't make much less sense than having it here currently do.
All of these USB-C PHYs are dual lane for bi-directional SS USB and
quad lane for uni-directional DP (even if only CC1 orientation and lanes
2 and 3 are currently supported).
I should probably just drop the lanes parameter completely, either as a
preparatory clean up or as follow-on one (e.g. also a bit depending on
if there are other reasons for respinning a v2).
Johan
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
@ 2022-11-14 8:54 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-14 8:54 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On Sat, Nov 12, 2022 at 10:43:14AM +0300, Dmitry Baryshkov wrote:
> On 11/11/2022 11:56, Johan Hovold wrote:
> > It does not really make any sense to keep separate configuration
> > structures for the USB and DP parts of the same PHY so merge them.
> >
> > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > ---
> > drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++---------------
> > 1 file changed, 57 insertions(+), 125 deletions(-)
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > index b27d1821116c..249912b75964 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > @@ -798,10 +798,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
> >
> > struct qmp_phy;
> >
> > -/* struct qmp_phy_cfg - per-PHY initialization config */
> > struct qmp_phy_cfg {
> > - /* phy-type - PCIE/UFS/USB */
> > - unsigned int type;
> > int lanes;
>
> int lanes doesn't really make sense here in my opinion. It should be
> usb_lanes and dp_lanes.
It doesn't make much less sense than having it here currently do.
All of these USB-C PHYs are dual lane for bi-directional SS USB and
quad lane for uni-directional DP (even if only CC1 orientation and lanes
2 and 3 are currently supported).
I should probably just drop the lanes parameter completely, either as a
preparatory clean up or as follow-on one (e.g. also a bit depending on
if there are other reasons for respinning a v2).
Johan
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 18/22] phy: qcom-qmp-combo: merge driver data
2022-11-12 7:46 ` Dmitry Baryshkov
@ 2022-11-14 9:01 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-14 9:01 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On Sat, Nov 12, 2022 at 10:46:53AM +0300, Dmitry Baryshkov wrote:
> On 11/11/2022 11:56, Johan Hovold wrote:
> > The QMP combo driver manages a single PHY (even if it provides two
> > interfaces for USB and DP, respectively) so merge the old qcom_qmp and
> > qmp_phy structures and drop the PHY array.
> >
> > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > ---
> > drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 690 ++++++++++------------
> > 1 file changed, 313 insertions(+), 377 deletions(-)
> >
> > -/**
> > - * struct qmp_phy - per-lane phy descriptor
> > - *
> > - * @phy: generic phy
> > - * @cfg: phy specific configuration
> > - * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
> > - * @tx: iomapped memory space for lane's tx
> > - * @rx: iomapped memory space for lane's rx
> > - * @pcs: iomapped memory space for lane's pcs
> > - * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
> > - * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> > - * @pcs_misc: iomapped memory space for lane's pcs_misc
> > - * @pcs_usb: iomapped memory space for lane's pcs_usb
> > - * @pipe_clk: pipe clock
> > - * @qmp: QMP phy to which this lane belongs
> > - * @mode: current PHY mode
> > - * @dp_aux_cfg: Display port aux config
> > - * @dp_opts: Display port optional config
> > - * @dp_clks: Display port clocks
> > - */
> > -struct qmp_phy {
> > - struct phy *phy;
> > +struct qmp_phy_dp_clks {
> > + struct qmp_combo *qmp;
> > + struct clk_hw dp_link_hw;
> > + struct clk_hw dp_pixel_hw;
> > +};
> > +
>
> It would make sense to keep the kerneldoc here.
I disagree. The above kernel doc is at best pointless and mostly just
restates what can be understood from the field names.
Note how it also incorrect by referring to "memory space for *lane's*
...".
> > +struct qmp_combo {
> > + struct device *dev;
> > +
> > const struct qmp_phy_cfg *cfg;
> > +
> > + void __iomem *dp_com;
> > +
> > void __iomem *serdes;
> > void __iomem *tx;
> > void __iomem *rx;
> > @@ -899,59 +889,33 @@ struct qmp_phy {
> > void __iomem *dp_pcs;
> >
> > struct clk *pipe_clk;
> > - struct qcom_qmp *qmp;
> > - enum phy_mode mode;
> > - unsigned int dp_aux_cfg;
> > - struct phy_configure_opts_dp dp_opts;
> > - struct qmp_phy_dp_clks *dp_clks;
> > -};
> > -
> > -struct qmp_phy_dp_clks {
> > - struct qmp_phy *qphy;
> > - struct clk_hw dp_link_hw;
> > - struct clk_hw dp_pixel_hw;
> > -};
> > -
> > -/**
> > - * struct qcom_qmp - structure holding QMP phy block attributes
> > - *
> > - * @dev: device
> > - * @dp_com: iomapped memory space for phy's dp_com control block
> > - *
> > - * @clks: array of clocks required by phy
> > - * @resets: array of resets required by phy
> > - * @vregs: regulator supplies bulk data
> > - *
> > - * @phys: array of per-lane phy descriptors
> > - * @phy_mutex: mutex lock for PHY common block initialization
> > - * @init_count: phy common block initialization count
> > - */
> > -struct qcom_qmp {
> > - struct device *dev;
> > - void __iomem *dp_com;
> > -
> > struct clk_bulk_data *clks;
> > struct reset_control_bulk_data *resets;
> > struct regulator_bulk_data *vregs;
> >
> > - struct qmp_phy **phys;
> > - struct qmp_phy *usb_phy;
> > -
> > struct mutex phy_mutex;
> > int init_count;
> > +
> > + struct phy *usb_phy;
> > + enum phy_mode mode;
> > +
> > + struct phy *dp_phy;
> > + unsigned int dp_aux_cfg;
> > + struct phy_configure_opts_dp dp_opts;
> > + struct qmp_phy_dp_clks *dp_clks;
> > };
> >
> > -static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
> > -static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
> > -static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
> > -static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
> > +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp);
> > +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp);
> > +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp);
> > +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp);
> >
> > -static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
> > -static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
> > -static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
> > -static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
> > +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp);
> > +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp);
> > +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp);
> > +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp);
> >
> > -static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy);
> > +static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp);
>
>
> As you are doing the cleanup anyway, would it make sense to move these
> functions up to be able to drop these prototypes?
Nah, we want to keep the DP implementation together and for now the
configuration structs live at the top of the file.
> >
> > static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> > {
> > @@ -1265,11 +1229,11 @@ static void qmp_combo_configure(void __iomem *base,
>
>
> The rest LGTM
Thanks for reviewing all of these these.
Johan
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 18/22] phy: qcom-qmp-combo: merge driver data
@ 2022-11-14 9:01 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-14 9:01 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On Sat, Nov 12, 2022 at 10:46:53AM +0300, Dmitry Baryshkov wrote:
> On 11/11/2022 11:56, Johan Hovold wrote:
> > The QMP combo driver manages a single PHY (even if it provides two
> > interfaces for USB and DP, respectively) so merge the old qcom_qmp and
> > qmp_phy structures and drop the PHY array.
> >
> > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > ---
> > drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 690 ++++++++++------------
> > 1 file changed, 313 insertions(+), 377 deletions(-)
> >
> > -/**
> > - * struct qmp_phy - per-lane phy descriptor
> > - *
> > - * @phy: generic phy
> > - * @cfg: phy specific configuration
> > - * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
> > - * @tx: iomapped memory space for lane's tx
> > - * @rx: iomapped memory space for lane's rx
> > - * @pcs: iomapped memory space for lane's pcs
> > - * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
> > - * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> > - * @pcs_misc: iomapped memory space for lane's pcs_misc
> > - * @pcs_usb: iomapped memory space for lane's pcs_usb
> > - * @pipe_clk: pipe clock
> > - * @qmp: QMP phy to which this lane belongs
> > - * @mode: current PHY mode
> > - * @dp_aux_cfg: Display port aux config
> > - * @dp_opts: Display port optional config
> > - * @dp_clks: Display port clocks
> > - */
> > -struct qmp_phy {
> > - struct phy *phy;
> > +struct qmp_phy_dp_clks {
> > + struct qmp_combo *qmp;
> > + struct clk_hw dp_link_hw;
> > + struct clk_hw dp_pixel_hw;
> > +};
> > +
>
> It would make sense to keep the kerneldoc here.
I disagree. The above kernel doc is at best pointless and mostly just
restates what can be understood from the field names.
Note how it also incorrect by referring to "memory space for *lane's*
...".
> > +struct qmp_combo {
> > + struct device *dev;
> > +
> > const struct qmp_phy_cfg *cfg;
> > +
> > + void __iomem *dp_com;
> > +
> > void __iomem *serdes;
> > void __iomem *tx;
> > void __iomem *rx;
> > @@ -899,59 +889,33 @@ struct qmp_phy {
> > void __iomem *dp_pcs;
> >
> > struct clk *pipe_clk;
> > - struct qcom_qmp *qmp;
> > - enum phy_mode mode;
> > - unsigned int dp_aux_cfg;
> > - struct phy_configure_opts_dp dp_opts;
> > - struct qmp_phy_dp_clks *dp_clks;
> > -};
> > -
> > -struct qmp_phy_dp_clks {
> > - struct qmp_phy *qphy;
> > - struct clk_hw dp_link_hw;
> > - struct clk_hw dp_pixel_hw;
> > -};
> > -
> > -/**
> > - * struct qcom_qmp - structure holding QMP phy block attributes
> > - *
> > - * @dev: device
> > - * @dp_com: iomapped memory space for phy's dp_com control block
> > - *
> > - * @clks: array of clocks required by phy
> > - * @resets: array of resets required by phy
> > - * @vregs: regulator supplies bulk data
> > - *
> > - * @phys: array of per-lane phy descriptors
> > - * @phy_mutex: mutex lock for PHY common block initialization
> > - * @init_count: phy common block initialization count
> > - */
> > -struct qcom_qmp {
> > - struct device *dev;
> > - void __iomem *dp_com;
> > -
> > struct clk_bulk_data *clks;
> > struct reset_control_bulk_data *resets;
> > struct regulator_bulk_data *vregs;
> >
> > - struct qmp_phy **phys;
> > - struct qmp_phy *usb_phy;
> > -
> > struct mutex phy_mutex;
> > int init_count;
> > +
> > + struct phy *usb_phy;
> > + enum phy_mode mode;
> > +
> > + struct phy *dp_phy;
> > + unsigned int dp_aux_cfg;
> > + struct phy_configure_opts_dp dp_opts;
> > + struct qmp_phy_dp_clks *dp_clks;
> > };
> >
> > -static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
> > -static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
> > -static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
> > -static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
> > +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp);
> > +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp);
> > +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp);
> > +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp);
> >
> > -static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
> > -static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
> > -static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
> > -static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
> > +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp);
> > +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp);
> > +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp);
> > +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp);
> >
> > -static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy);
> > +static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp);
>
>
> As you are doing the cleanup anyway, would it make sense to move these
> functions up to be able to drop these prototypes?
Nah, we want to keep the DP implementation together and for now the
configuration structs live at the top of the file.
> >
> > static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> > {
> > @@ -1265,11 +1229,11 @@ static void qmp_combo_configure(void __iomem *base,
>
>
> The rest LGTM
Thanks for reviewing all of these these.
Johan
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 18/22] phy: qcom-qmp-combo: merge driver data
2022-11-14 9:01 ` Johan Hovold
@ 2022-11-14 9:22 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-14 9:22 UTC (permalink / raw)
To: Johan Hovold
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On Mon, 14 Nov 2022 at 12:02, Johan Hovold <johan@kernel.org> wrote:
>
> On Sat, Nov 12, 2022 at 10:46:53AM +0300, Dmitry Baryshkov wrote:
> > On 11/11/2022 11:56, Johan Hovold wrote:
> > > The QMP combo driver manages a single PHY (even if it provides two
> > > interfaces for USB and DP, respectively) so merge the old qcom_qmp and
> > > qmp_phy structures and drop the PHY array.
> > >
> > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > > ---
> > > drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 690 ++++++++++------------
> > > 1 file changed, 313 insertions(+), 377 deletions(-)
> > >
>
> > > -/**
> > > - * struct qmp_phy - per-lane phy descriptor
> > > - *
> > > - * @phy: generic phy
> > > - * @cfg: phy specific configuration
> > > - * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
> > > - * @tx: iomapped memory space for lane's tx
> > > - * @rx: iomapped memory space for lane's rx
> > > - * @pcs: iomapped memory space for lane's pcs
> > > - * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
> > > - * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> > > - * @pcs_misc: iomapped memory space for lane's pcs_misc
> > > - * @pcs_usb: iomapped memory space for lane's pcs_usb
> > > - * @pipe_clk: pipe clock
> > > - * @qmp: QMP phy to which this lane belongs
> > > - * @mode: current PHY mode
> > > - * @dp_aux_cfg: Display port aux config
> > > - * @dp_opts: Display port optional config
> > > - * @dp_clks: Display port clocks
> > > - */
> > > -struct qmp_phy {
> > > - struct phy *phy;
> > > +struct qmp_phy_dp_clks {
> > > + struct qmp_combo *qmp;
> > > + struct clk_hw dp_link_hw;
> > > + struct clk_hw dp_pixel_hw;
> > > +};
> > > +
> >
> > It would make sense to keep the kerneldoc here.
>
> I disagree. The above kernel doc is at best pointless and mostly just
> restates what can be understood from the field names.
Well, if viewed this way, 80% of kerneldocs's are pointless, as most
of the fields are self-describing.
In this case I can agree with you though. Especially since the struct
is not a part of the public API.
>
> Note how it also incorrect by referring to "memory space for *lane's*
I assumed that `lane's rx' and `lane's tx' were ugly wording. But yeah.
> ...".
>
> > > +struct qmp_combo {
> > > + struct device *dev;
> > > +
> > > const struct qmp_phy_cfg *cfg;
> > > +
> > > + void __iomem *dp_com;
> > > +
> > > void __iomem *serdes;
> > > void __iomem *tx;
> > > void __iomem *rx;
> > > @@ -899,59 +889,33 @@ struct qmp_phy {
> > > void __iomem *dp_pcs;
> > >
> > > struct clk *pipe_clk;
> > > - struct qcom_qmp *qmp;
> > > - enum phy_mode mode;
> > > - unsigned int dp_aux_cfg;
> > > - struct phy_configure_opts_dp dp_opts;
> > > - struct qmp_phy_dp_clks *dp_clks;
> > > -};
> > > -
> > > -struct qmp_phy_dp_clks {
> > > - struct qmp_phy *qphy;
> > > - struct clk_hw dp_link_hw;
> > > - struct clk_hw dp_pixel_hw;
> > > -};
> > > -
> > > -/**
> > > - * struct qcom_qmp - structure holding QMP phy block attributes
> > > - *
> > > - * @dev: device
> > > - * @dp_com: iomapped memory space for phy's dp_com control block
> > > - *
> > > - * @clks: array of clocks required by phy
> > > - * @resets: array of resets required by phy
> > > - * @vregs: regulator supplies bulk data
> > > - *
> > > - * @phys: array of per-lane phy descriptors
> > > - * @phy_mutex: mutex lock for PHY common block initialization
> > > - * @init_count: phy common block initialization count
> > > - */
> > > -struct qcom_qmp {
> > > - struct device *dev;
> > > - void __iomem *dp_com;
> > > -
> > > struct clk_bulk_data *clks;
> > > struct reset_control_bulk_data *resets;
> > > struct regulator_bulk_data *vregs;
> > >
> > > - struct qmp_phy **phys;
> > > - struct qmp_phy *usb_phy;
> > > -
> > > struct mutex phy_mutex;
> > > int init_count;
> > > +
> > > + struct phy *usb_phy;
> > > + enum phy_mode mode;
> > > +
> > > + struct phy *dp_phy;
> > > + unsigned int dp_aux_cfg;
> > > + struct phy_configure_opts_dp dp_opts;
> > > + struct qmp_phy_dp_clks *dp_clks;
> > > };
> > >
> > > -static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
> > > -static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
> > > -static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
> > > -static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
> > > +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp);
> > > +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp);
> > > +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp);
> > > +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp);
> > >
> > > -static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
> > > -static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
> > > -static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
> > > -static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
> > > +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp);
> > > +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp);
> > > +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp);
> > > +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp);
> > >
> > > -static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy);
> > > +static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp);
> >
> >
> > As you are doing the cleanup anyway, would it make sense to move these
> > functions up to be able to drop these prototypes?
>
> Nah, we want to keep the DP implementation together and for now the
> configuration structs live at the top of the file.
>
> > >
> > > static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> > > {
> > > @@ -1265,11 +1229,11 @@ static void qmp_combo_configure(void __iomem *base,
> >
> >
> > The rest LGTM
>
> Thanks for reviewing all of these these.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 18/22] phy: qcom-qmp-combo: merge driver data
@ 2022-11-14 9:22 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-14 9:22 UTC (permalink / raw)
To: Johan Hovold
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On Mon, 14 Nov 2022 at 12:02, Johan Hovold <johan@kernel.org> wrote:
>
> On Sat, Nov 12, 2022 at 10:46:53AM +0300, Dmitry Baryshkov wrote:
> > On 11/11/2022 11:56, Johan Hovold wrote:
> > > The QMP combo driver manages a single PHY (even if it provides two
> > > interfaces for USB and DP, respectively) so merge the old qcom_qmp and
> > > qmp_phy structures and drop the PHY array.
> > >
> > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > > ---
> > > drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 690 ++++++++++------------
> > > 1 file changed, 313 insertions(+), 377 deletions(-)
> > >
>
> > > -/**
> > > - * struct qmp_phy - per-lane phy descriptor
> > > - *
> > > - * @phy: generic phy
> > > - * @cfg: phy specific configuration
> > > - * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
> > > - * @tx: iomapped memory space for lane's tx
> > > - * @rx: iomapped memory space for lane's rx
> > > - * @pcs: iomapped memory space for lane's pcs
> > > - * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
> > > - * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
> > > - * @pcs_misc: iomapped memory space for lane's pcs_misc
> > > - * @pcs_usb: iomapped memory space for lane's pcs_usb
> > > - * @pipe_clk: pipe clock
> > > - * @qmp: QMP phy to which this lane belongs
> > > - * @mode: current PHY mode
> > > - * @dp_aux_cfg: Display port aux config
> > > - * @dp_opts: Display port optional config
> > > - * @dp_clks: Display port clocks
> > > - */
> > > -struct qmp_phy {
> > > - struct phy *phy;
> > > +struct qmp_phy_dp_clks {
> > > + struct qmp_combo *qmp;
> > > + struct clk_hw dp_link_hw;
> > > + struct clk_hw dp_pixel_hw;
> > > +};
> > > +
> >
> > It would make sense to keep the kerneldoc here.
>
> I disagree. The above kernel doc is at best pointless and mostly just
> restates what can be understood from the field names.
Well, if viewed this way, 80% of kerneldocs's are pointless, as most
of the fields are self-describing.
In this case I can agree with you though. Especially since the struct
is not a part of the public API.
>
> Note how it also incorrect by referring to "memory space for *lane's*
I assumed that `lane's rx' and `lane's tx' were ugly wording. But yeah.
> ...".
>
> > > +struct qmp_combo {
> > > + struct device *dev;
> > > +
> > > const struct qmp_phy_cfg *cfg;
> > > +
> > > + void __iomem *dp_com;
> > > +
> > > void __iomem *serdes;
> > > void __iomem *tx;
> > > void __iomem *rx;
> > > @@ -899,59 +889,33 @@ struct qmp_phy {
> > > void __iomem *dp_pcs;
> > >
> > > struct clk *pipe_clk;
> > > - struct qcom_qmp *qmp;
> > > - enum phy_mode mode;
> > > - unsigned int dp_aux_cfg;
> > > - struct phy_configure_opts_dp dp_opts;
> > > - struct qmp_phy_dp_clks *dp_clks;
> > > -};
> > > -
> > > -struct qmp_phy_dp_clks {
> > > - struct qmp_phy *qphy;
> > > - struct clk_hw dp_link_hw;
> > > - struct clk_hw dp_pixel_hw;
> > > -};
> > > -
> > > -/**
> > > - * struct qcom_qmp - structure holding QMP phy block attributes
> > > - *
> > > - * @dev: device
> > > - * @dp_com: iomapped memory space for phy's dp_com control block
> > > - *
> > > - * @clks: array of clocks required by phy
> > > - * @resets: array of resets required by phy
> > > - * @vregs: regulator supplies bulk data
> > > - *
> > > - * @phys: array of per-lane phy descriptors
> > > - * @phy_mutex: mutex lock for PHY common block initialization
> > > - * @init_count: phy common block initialization count
> > > - */
> > > -struct qcom_qmp {
> > > - struct device *dev;
> > > - void __iomem *dp_com;
> > > -
> > > struct clk_bulk_data *clks;
> > > struct reset_control_bulk_data *resets;
> > > struct regulator_bulk_data *vregs;
> > >
> > > - struct qmp_phy **phys;
> > > - struct qmp_phy *usb_phy;
> > > -
> > > struct mutex phy_mutex;
> > > int init_count;
> > > +
> > > + struct phy *usb_phy;
> > > + enum phy_mode mode;
> > > +
> > > + struct phy *dp_phy;
> > > + unsigned int dp_aux_cfg;
> > > + struct phy_configure_opts_dp dp_opts;
> > > + struct qmp_phy_dp_clks *dp_clks;
> > > };
> > >
> > > -static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy);
> > > -static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy);
> > > -static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy);
> > > -static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy);
> > > +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_combo *qmp);
> > > +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_combo *qmp);
> > > +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_combo *qmp);
> > > +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_combo *qmp);
> > >
> > > -static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
> > > -static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
> > > -static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
> > > -static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
> > > +static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_combo *qmp);
> > > +static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_combo *qmp);
> > > +static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_combo *qmp);
> > > +static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_combo *qmp);
> > >
> > > -static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_phy *qphy);
> > > +static int qcom_qmp_v5_phy_configure_dp_phy(struct qmp_combo *qmp);
> >
> >
> > As you are doing the cleanup anyway, would it make sense to move these
> > functions up to be able to drop these prototypes?
>
> Nah, we want to keep the DP implementation together and for now the
> configuration structs live at the top of the file.
>
> > >
> > > static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> > > {
> > > @@ -1265,11 +1229,11 @@ static void qmp_combo_configure(void __iomem *base,
> >
> >
> > The rest LGTM
>
> Thanks for reviewing all of these these.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 16/22] phy: qcom-qmp-combo: add DP configuration tables
2022-11-14 8:38 ` Johan Hovold
@ 2022-11-14 9:49 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-14 9:49 UTC (permalink / raw)
To: Johan Hovold
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On 14/11/2022 11:38, Johan Hovold wrote:
> On Sat, Nov 12, 2022 at 10:39:12AM +0300, Dmitry Baryshkov wrote:
>> On 11/11/2022 11:56, Johan Hovold wrote:
>>> In preparation for merging the USB and DP configurations, add dedicated
>>> pointers for the DP serdes and tx tables to the configurations.
>>>
>>> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
>>> ---
>>> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 45 ++++++++++++-----------
>>> 1 file changed, 24 insertions(+), 21 deletions(-)
>>>
>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> index 499368e19e00..b27d1821116c 100644
>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> @@ -816,6 +816,11 @@ struct qmp_phy_cfg {
>>> const struct qmp_phy_init_tbl *pcs_usb_tbl;
>>> int pcs_usb_tbl_num;
>>>
>>> + const struct qmp_phy_init_tbl *dp_serdes_tbl;
>>> + int dp_serdes_tbl_num;
>>> + const struct qmp_phy_init_tbl *dp_tx_tbl;
>>> + int dp_tx_tbl_num;
>>> +
>>
>> I'd prefer to have DP-specific instance of struct qmp_phy_cfg_tbls here
>> instead of having separate dp-specific fields. WDYT?
>
> No, I don't see any good reason for doing so currently.
>
> You may be able to share a few pointers between some of the SoCs but
> only until it turns out they need to override certain sequences anyway
> (e.g. sc8280xp which mixes v4 and v5 tables currently).
>
> You'd also need dedicated aggregate table structs for USB and DP and it
> seems all of this would just make things more opaque for little gain.
I was thinking about moving the qmp.*init_registers into the common
library. However let's probably finish the cleanup before working on
code consolidation.
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 16/22] phy: qcom-qmp-combo: add DP configuration tables
@ 2022-11-14 9:49 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-14 9:49 UTC (permalink / raw)
To: Johan Hovold
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On 14/11/2022 11:38, Johan Hovold wrote:
> On Sat, Nov 12, 2022 at 10:39:12AM +0300, Dmitry Baryshkov wrote:
>> On 11/11/2022 11:56, Johan Hovold wrote:
>>> In preparation for merging the USB and DP configurations, add dedicated
>>> pointers for the DP serdes and tx tables to the configurations.
>>>
>>> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
>>> ---
>>> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 45 ++++++++++++-----------
>>> 1 file changed, 24 insertions(+), 21 deletions(-)
>>>
>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> index 499368e19e00..b27d1821116c 100644
>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> @@ -816,6 +816,11 @@ struct qmp_phy_cfg {
>>> const struct qmp_phy_init_tbl *pcs_usb_tbl;
>>> int pcs_usb_tbl_num;
>>>
>>> + const struct qmp_phy_init_tbl *dp_serdes_tbl;
>>> + int dp_serdes_tbl_num;
>>> + const struct qmp_phy_init_tbl *dp_tx_tbl;
>>> + int dp_tx_tbl_num;
>>> +
>>
>> I'd prefer to have DP-specific instance of struct qmp_phy_cfg_tbls here
>> instead of having separate dp-specific fields. WDYT?
>
> No, I don't see any good reason for doing so currently.
>
> You may be able to share a few pointers between some of the SoCs but
> only until it turns out they need to override certain sequences anyway
> (e.g. sc8280xp which mixes v4 and v5 tables currently).
>
> You'd also need dedicated aggregate table structs for USB and DP and it
> seems all of this would just make things more opaque for little gain.
I was thinking about moving the qmp.*init_registers into the common
library. However let's probably finish the cleanup before working on
code consolidation.
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 16/22] phy: qcom-qmp-combo: add DP configuration tables
2022-11-14 8:38 ` Johan Hovold
@ 2022-11-14 9:50 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-14 9:50 UTC (permalink / raw)
To: Johan Hovold
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On 14/11/2022 11:38, Johan Hovold wrote:
> On Sat, Nov 12, 2022 at 10:39:12AM +0300, Dmitry Baryshkov wrote:
>> On 11/11/2022 11:56, Johan Hovold wrote:
>>> In preparation for merging the USB and DP configurations, add dedicated
>>> pointers for the DP serdes and tx tables to the configurations.
>>>
>>> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
>>> ---
>>> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 45 ++++++++++++-----------
>>> 1 file changed, 24 insertions(+), 21 deletions(-)
>>>
>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> index 499368e19e00..b27d1821116c 100644
>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> @@ -816,6 +816,11 @@ struct qmp_phy_cfg {
>>> const struct qmp_phy_init_tbl *pcs_usb_tbl;
>>> int pcs_usb_tbl_num;
>>>
>>> + const struct qmp_phy_init_tbl *dp_serdes_tbl;
>>> + int dp_serdes_tbl_num;
>>> + const struct qmp_phy_init_tbl *dp_tx_tbl;
>>> + int dp_tx_tbl_num;
>>> +
>>
>> I'd prefer to have DP-specific instance of struct qmp_phy_cfg_tbls here
>> instead of having separate dp-specific fields. WDYT?
>
> No, I don't see any good reason for doing so currently.
>
> You may be able to share a few pointers between some of the SoCs but
> only until it turns out they need to override certain sequences anyway
> (e.g. sc8280xp which mixes v4 and v5 tables currently).
>
> You'd also need dedicated aggregate table structs for USB and DP and it
> seems all of this would just make things more opaque for little gain.
Forgot:
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 16/22] phy: qcom-qmp-combo: add DP configuration tables
@ 2022-11-14 9:50 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-14 9:50 UTC (permalink / raw)
To: Johan Hovold
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On 14/11/2022 11:38, Johan Hovold wrote:
> On Sat, Nov 12, 2022 at 10:39:12AM +0300, Dmitry Baryshkov wrote:
>> On 11/11/2022 11:56, Johan Hovold wrote:
>>> In preparation for merging the USB and DP configurations, add dedicated
>>> pointers for the DP serdes and tx tables to the configurations.
>>>
>>> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
>>> ---
>>> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 45 ++++++++++++-----------
>>> 1 file changed, 24 insertions(+), 21 deletions(-)
>>>
>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> index 499368e19e00..b27d1821116c 100644
>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> @@ -816,6 +816,11 @@ struct qmp_phy_cfg {
>>> const struct qmp_phy_init_tbl *pcs_usb_tbl;
>>> int pcs_usb_tbl_num;
>>>
>>> + const struct qmp_phy_init_tbl *dp_serdes_tbl;
>>> + int dp_serdes_tbl_num;
>>> + const struct qmp_phy_init_tbl *dp_tx_tbl;
>>> + int dp_tx_tbl_num;
>>> +
>>
>> I'd prefer to have DP-specific instance of struct qmp_phy_cfg_tbls here
>> instead of having separate dp-specific fields. WDYT?
>
> No, I don't see any good reason for doing so currently.
>
> You may be able to share a few pointers between some of the SoCs but
> only until it turns out they need to override certain sequences anyway
> (e.g. sc8280xp which mixes v4 and v5 tables currently).
>
> You'd also need dedicated aggregate table structs for USB and DP and it
> seems all of this would just make things more opaque for little gain.
Forgot:
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
2022-11-14 8:54 ` Johan Hovold
@ 2022-11-14 10:10 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-14 10:10 UTC (permalink / raw)
To: Johan Hovold
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On 14/11/2022 11:54, Johan Hovold wrote:
> On Sat, Nov 12, 2022 at 10:43:14AM +0300, Dmitry Baryshkov wrote:
>> On 11/11/2022 11:56, Johan Hovold wrote:
>>> It does not really make any sense to keep separate configuration
>>> structures for the USB and DP parts of the same PHY so merge them.
>>>
>>> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
>>> ---
>>> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++---------------
>>> 1 file changed, 57 insertions(+), 125 deletions(-)
>>>
>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> index b27d1821116c..249912b75964 100644
>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> @@ -798,10 +798,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
>>>
>>> struct qmp_phy;
>>>
>>> -/* struct qmp_phy_cfg - per-PHY initialization config */
>>> struct qmp_phy_cfg {
>>> - /* phy-type - PCIE/UFS/USB */
>>> - unsigned int type;
>>> int lanes;
>>
>> int lanes doesn't really make sense here in my opinion. It should be
>> usb_lanes and dp_lanes.
>
> It doesn't make much less sense than having it here currently do.
>
> All of these USB-C PHYs are dual lane for bi-directional SS USB and
> quad lane for uni-directional DP (even if only CC1 orientation and lanes
> 2 and 3 are currently supported).
I was under impression that sdm845 has just a single lane for each of
USB and DP. After rechecking the phy/next, I see that it was my mistake
(quite logical, SS is two lanes, so the compliant PHY must have two
lanes too).
I wander how/if 4-lane DP works. The only thing that we do is
programming of the QSERDES_DP_PHY_PD_CTL register, however judging e.g.
your 4-lane PCIe changes, one should probably also program the other two
lanes. Maybe it is handled automatically inside the hardware.
> I should probably just drop the lanes parameter completely, either as a
> preparatory clean up or as follow-on one (e.g. also a bit depending on
> if there are other reasons for respinning a v2).
I think a follow up is enough, but let's get it. Having a single lanes=2
field looks... strange.
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
@ 2022-11-14 10:10 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-14 10:10 UTC (permalink / raw)
To: Johan Hovold
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On 14/11/2022 11:54, Johan Hovold wrote:
> On Sat, Nov 12, 2022 at 10:43:14AM +0300, Dmitry Baryshkov wrote:
>> On 11/11/2022 11:56, Johan Hovold wrote:
>>> It does not really make any sense to keep separate configuration
>>> structures for the USB and DP parts of the same PHY so merge them.
>>>
>>> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
>>> ---
>>> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++---------------
>>> 1 file changed, 57 insertions(+), 125 deletions(-)
>>>
>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> index b27d1821116c..249912b75964 100644
>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
>>> @@ -798,10 +798,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
>>>
>>> struct qmp_phy;
>>>
>>> -/* struct qmp_phy_cfg - per-PHY initialization config */
>>> struct qmp_phy_cfg {
>>> - /* phy-type - PCIE/UFS/USB */
>>> - unsigned int type;
>>> int lanes;
>>
>> int lanes doesn't really make sense here in my opinion. It should be
>> usb_lanes and dp_lanes.
>
> It doesn't make much less sense than having it here currently do.
>
> All of these USB-C PHYs are dual lane for bi-directional SS USB and
> quad lane for uni-directional DP (even if only CC1 orientation and lanes
> 2 and 3 are currently supported).
I was under impression that sdm845 has just a single lane for each of
USB and DP. After rechecking the phy/next, I see that it was my mistake
(quite logical, SS is two lanes, so the compliant PHY must have two
lanes too).
I wander how/if 4-lane DP works. The only thing that we do is
programming of the QSERDES_DP_PHY_PD_CTL register, however judging e.g.
your 4-lane PCIe changes, one should probably also program the other two
lanes. Maybe it is handled automatically inside the hardware.
> I should probably just drop the lanes parameter completely, either as a
> preparatory clean up or as follow-on one (e.g. also a bit depending on
> if there are other reasons for respinning a v2).
I think a follow up is enough, but let's get it. Having a single lanes=2
field looks... strange.
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
2022-11-11 8:56 ` Johan Hovold
@ 2022-11-14 10:11 ` Dmitry Baryshkov
-1 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-14 10:11 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> It does not really make any sense to keep separate configuration
> structures for the USB and DP parts of the same PHY so merge them.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++---------------
> 1 file changed, 57 insertions(+), 125 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
@ 2022-11-14 10:11 ` Dmitry Baryshkov
0 siblings, 0 replies; 108+ messages in thread
From: Dmitry Baryshkov @ 2022-11-14 10:11 UTC (permalink / raw)
To: Johan Hovold, Vinod Koul
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, linux-arm-msm,
linux-phy, linux-kernel
On 11/11/2022 11:56, Johan Hovold wrote:
> It does not really make any sense to keep separate configuration
> structures for the USB and DP parts of the same PHY so merge them.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++---------------
> 1 file changed, 57 insertions(+), 125 deletions(-)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
2022-11-14 10:10 ` Dmitry Baryshkov
@ 2022-11-14 10:57 ` Johan Hovold
-1 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-14 10:57 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On Mon, Nov 14, 2022 at 01:10:43PM +0300, Dmitry Baryshkov wrote:
> On 14/11/2022 11:54, Johan Hovold wrote:
> > On Sat, Nov 12, 2022 at 10:43:14AM +0300, Dmitry Baryshkov wrote:
> >> On 11/11/2022 11:56, Johan Hovold wrote:
> >>> It does not really make any sense to keep separate configuration
> >>> structures for the USB and DP parts of the same PHY so merge them.
> >>> -/* struct qmp_phy_cfg - per-PHY initialization config */
> >>> struct qmp_phy_cfg {
> >>> - /* phy-type - PCIE/UFS/USB */
> >>> - unsigned int type;
> >>> int lanes;
> >>
> >> int lanes doesn't really make sense here in my opinion. It should be
> >> usb_lanes and dp_lanes.
> >
> > It doesn't make much less sense than having it here currently do.
> >
> > All of these USB-C PHYs are dual lane for bi-directional SS USB and
> > quad lane for uni-directional DP (even if only CC1 orientation and lanes
> > 2 and 3 are currently supported).
>
> I was under impression that sdm845 has just a single lane for each of
> USB and DP. After rechecking the phy/next, I see that it was my mistake
> (quite logical, SS is two lanes, so the compliant PHY must have two
> lanes too).
>
> I wander how/if 4-lane DP works. The only thing that we do is
> programming of the QSERDES_DP_PHY_PD_CTL register, however judging e.g.
> your 4-lane PCIe changes, one should probably also program the other two
> lanes. Maybe it is handled automatically inside the hardware.
4-lane PCIe on SC8280XP is a different thing entirely (and remember that
that's actually 8 uni-directional lanes).
I'm sure there are further problems with the current DP alt mode
implementation, but hopefully that can be resolved when adding support
for orientation detection. I'm just fixing the obvious bugs and try to
stay "bug compatible" otherwise. :)
> > I should probably just drop the lanes parameter completely, either as a
> > preparatory clean up or as follow-on one (e.g. also a bit depending on
> > if there are other reasons for respinning a v2).
>
> I think a follow up is enough, but let's get it. Having a single lanes=2
> field looks... strange.
I dropped the lane parameter as a preparatory patch to this one in v2
that I'll post in a bit.
Johan
^ permalink raw reply [flat|nested] 108+ messages in thread
* Re: [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations
@ 2022-11-14 10:57 ` Johan Hovold
0 siblings, 0 replies; 108+ messages in thread
From: Johan Hovold @ 2022-11-14 10:57 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Johan Hovold, Vinod Koul, Andy Gross, Bjorn Andersson,
Konrad Dybcio, linux-arm-msm, linux-phy, linux-kernel
On Mon, Nov 14, 2022 at 01:10:43PM +0300, Dmitry Baryshkov wrote:
> On 14/11/2022 11:54, Johan Hovold wrote:
> > On Sat, Nov 12, 2022 at 10:43:14AM +0300, Dmitry Baryshkov wrote:
> >> On 11/11/2022 11:56, Johan Hovold wrote:
> >>> It does not really make any sense to keep separate configuration
> >>> structures for the USB and DP parts of the same PHY so merge them.
> >>> -/* struct qmp_phy_cfg - per-PHY initialization config */
> >>> struct qmp_phy_cfg {
> >>> - /* phy-type - PCIE/UFS/USB */
> >>> - unsigned int type;
> >>> int lanes;
> >>
> >> int lanes doesn't really make sense here in my opinion. It should be
> >> usb_lanes and dp_lanes.
> >
> > It doesn't make much less sense than having it here currently do.
> >
> > All of these USB-C PHYs are dual lane for bi-directional SS USB and
> > quad lane for uni-directional DP (even if only CC1 orientation and lanes
> > 2 and 3 are currently supported).
>
> I was under impression that sdm845 has just a single lane for each of
> USB and DP. After rechecking the phy/next, I see that it was my mistake
> (quite logical, SS is two lanes, so the compliant PHY must have two
> lanes too).
>
> I wander how/if 4-lane DP works. The only thing that we do is
> programming of the QSERDES_DP_PHY_PD_CTL register, however judging e.g.
> your 4-lane PCIe changes, one should probably also program the other two
> lanes. Maybe it is handled automatically inside the hardware.
4-lane PCIe on SC8280XP is a different thing entirely (and remember that
that's actually 8 uni-directional lanes).
I'm sure there are further problems with the current DP alt mode
implementation, but hopefully that can be resolved when adding support
for orientation detection. I'm just fixing the obvious bugs and try to
stay "bug compatible" otherwise. :)
> > I should probably just drop the lanes parameter completely, either as a
> > preparatory clean up or as follow-on one (e.g. also a bit depending on
> > if there are other reasons for respinning a v2).
>
> I think a follow up is enough, but let's get it. Having a single lanes=2
> field looks... strange.
I dropped the lane parameter as a preparatory patch to this one in v2
that I'll post in a bit.
Johan
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 108+ messages in thread
end of thread, other threads:[~2022-11-14 10:57 UTC | newest]
Thread overview: 108+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-11 8:56 [PATCH 00/22] phy: qcom-qmp-combo: preparatory cleanups (set 2/3) Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-11 8:56 ` [PATCH 01/22] phy: qcom-qmp-combo: sort device-id table Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 6:18 ` Dmitry Baryshkov
2022-11-12 6:18 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 02/22] phy: qcom-qmp-combo: move " Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 6:18 ` Dmitry Baryshkov
2022-11-12 6:18 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 03/22] phy: qcom-qmp-combo: move pm ops Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 6:19 ` Dmitry Baryshkov
2022-11-12 6:19 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 04/22] phy: qcom-qmp-combo: rename PHY ops structures Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 6:19 ` Dmitry Baryshkov
2022-11-12 6:19 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 05/22] phy: qcom-qmp-combo: drop unused DP PHY mode op Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 6:19 ` Dmitry Baryshkov
2022-11-12 6:19 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 06/22] phy: qcom-qmp-combo: rename USB PHY ops Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 6:20 ` Dmitry Baryshkov
2022-11-12 6:20 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 07/22] phy: qcom-qmp-combo: drop unnecessary debug message Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 6:20 ` Dmitry Baryshkov
2022-11-12 6:20 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 08/22] phy: qcom-qmp-combo: separate USB and DP init ops Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 6:21 ` Dmitry Baryshkov
2022-11-12 6:21 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 09/22] phy: qcom-qmp-combo: rename DP PHY ops Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 6:21 ` Dmitry Baryshkov
2022-11-12 6:21 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 10/22] phy: qcom-qmp-combo: separate USB and DP power-on ops Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:32 ` Dmitry Baryshkov
2022-11-12 7:32 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 11/22] phy: qcom-qmp-combo: clean up serdes initialisation Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:33 ` Dmitry Baryshkov
2022-11-12 7:33 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 12/22] phy: qcom-qmp-combo: separate USB and DP devicetree parsing Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:50 ` Dmitry Baryshkov
2022-11-12 7:50 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 13/22] phy: qcom-qmp-combo: add dedicated DP iomem pointers Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:36 ` Dmitry Baryshkov
2022-11-12 7:36 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 14/22] phy: qcom-qmp-combo: clean up DP configurations Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:32 ` Dmitry Baryshkov
2022-11-12 7:32 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 15/22] phy: qcom-qmp-combo: rename sc8280xp config Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:33 ` Dmitry Baryshkov
2022-11-12 7:33 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 16/22] phy: qcom-qmp-combo: add DP configuration tables Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:39 ` Dmitry Baryshkov
2022-11-12 7:39 ` Dmitry Baryshkov
2022-11-14 8:38 ` Johan Hovold
2022-11-14 8:38 ` Johan Hovold
2022-11-14 9:49 ` Dmitry Baryshkov
2022-11-14 9:49 ` Dmitry Baryshkov
2022-11-14 9:50 ` Dmitry Baryshkov
2022-11-14 9:50 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:43 ` Dmitry Baryshkov
2022-11-12 7:43 ` Dmitry Baryshkov
2022-11-14 8:54 ` Johan Hovold
2022-11-14 8:54 ` Johan Hovold
2022-11-14 10:10 ` Dmitry Baryshkov
2022-11-14 10:10 ` Dmitry Baryshkov
2022-11-14 10:57 ` Johan Hovold
2022-11-14 10:57 ` Johan Hovold
2022-11-14 10:11 ` Dmitry Baryshkov
2022-11-14 10:11 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 18/22] phy: qcom-qmp-combo: merge driver data Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:46 ` Dmitry Baryshkov
2022-11-12 7:46 ` Dmitry Baryshkov
2022-11-14 9:01 ` Johan Hovold
2022-11-14 9:01 ` Johan Hovold
2022-11-14 9:22 ` Dmitry Baryshkov
2022-11-14 9:22 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 19/22] phy: qcom-qmp-combo: clean up device-tree parsing Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:48 ` Dmitry Baryshkov
2022-11-12 7:48 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 20/22] phy: qcom-qmp-combo: clean up probe initialisation Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:48 ` Dmitry Baryshkov
2022-11-12 7:48 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 21/22] phy: qcom-qmp-combo: clean up PHY init Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:49 ` Dmitry Baryshkov
2022-11-12 7:49 ` Dmitry Baryshkov
2022-11-11 8:56 ` [PATCH 22/22] phy: qcom-qmp-combo: clean up DP callback names Johan Hovold
2022-11-11 8:56 ` Johan Hovold
2022-11-12 7:49 ` Dmitry Baryshkov
2022-11-12 7:49 ` Dmitry Baryshkov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.