* [PATCH v3 1/5] dt-bindings: remoteproc: qcom: adsp: move memory-region and firmware-name out of pas-common
2022-12-07 19:23 [PATCH v3 0/5] remoteproc: qcom_q6v5_pas: add support for SM8550 adsp, cdsp & mpss Neil Armstrong
@ 2022-12-07 19:23 ` Neil Armstrong
2022-12-08 10:36 ` Krzysztof Kozlowski
2022-12-07 19:23 ` [PATCH v3 2/5] dt-bindings: remoteproc: qcom: adsp: document sm8550 adsp, cdsp & mpss compatible Neil Armstrong
` (4 subsequent siblings)
5 siblings, 1 reply; 9+ messages in thread
From: Neil Armstrong @ 2022-12-07 19:23 UTC (permalink / raw)
To: Amol Maheshwari, Srinivas Kandagatla, Bjorn Andersson,
Krzysztof Kozlowski, Andy Gross, Konrad Dybcio, Rob Herring,
Mathieu Poirier, Manivannan Sadhasivam
Cc: devicetree, linux-arm-msm, Neil Armstrong, linux-remoteproc,
Abel Vesa, linux-kernel
Move memory-region and firmware-name definitions out of qcom,pas-common.yaml
since they will be redefined differently for SM8550 PAS bindings documentation.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml | 4 ++++
Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml | 8 --------
Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml | 8 ++++++++
Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml | 8 ++++++++
.../devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml | 8 ++++++++
.../devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml | 8 ++++++++
Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml | 8 ++++++++
Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml | 8 ++++++++
Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml | 8 ++++++++
Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml | 8 ++++++++
10 files changed, 68 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 9af2db72b337..5b55a22182ce 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -39,6 +39,10 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle
description: Reference to the AOSS side-channel message RAM.
+ memory-region:
+ maxItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
required:
- compatible
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
index 1d5e01c8d8bc..171ef85de193 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
@@ -52,14 +52,6 @@ properties:
minItems: 1
maxItems: 3
- firmware-name:
- $ref: /schemas/types.yaml#/definitions/string
- description: Firmware name for the Hexagon core
-
- memory-region:
- maxItems: 1
- description: Reference to the reserved-memory for the Hexagon core
-
qcom,smem-states:
$ref: /schemas/types.yaml#/definitions/phandle-array
description: States used by the AP to signal the Hexagon core
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml
index 007349ef51ed..5efa0e5c0439 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml
@@ -41,6 +41,14 @@ properties:
power-domain-names: false
smd-edge: false
+ memory-region:
+ minItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Firmware name for the Hexagon core
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
index 6fd768609a66..5cefd2c58593 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
@@ -50,12 +50,20 @@ properties:
- const: mx
- const: mss
+ memory-region:
+ minItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
qcom,qmp:
$ref: /schemas/types.yaml#/definitions/phandle
description: Reference to the AOSS side-channel message RAM.
smd-edge: false
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Firmware name for the Hexagon core
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml
index 3026cfde5582..c1f8dd8d0e4c 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml
@@ -37,6 +37,14 @@ properties:
smd-edge: false
+ memory-region:
+ minItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Firmware name for the Hexagon core
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml
index c08274aaa6f8..f6fbc531dc28 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml
@@ -37,6 +37,14 @@ properties:
smd-edge: false
+ memory-region:
+ minItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Firmware name for the Hexagon core
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml
index cbeaa00ca4d4..c66e298462c7 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml
@@ -45,12 +45,20 @@ properties:
- const: cx
- const: mss
+ memory-region:
+ minItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
qcom,qmp:
$ref: /schemas/types.yaml#/definitions/phandle
description: Reference to the AOSS side-channel message RAM.
smd-edge: false
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Firmware name for the Hexagon core
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
index 911529400142..fee02fa800b5 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
@@ -35,8 +35,16 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle
description: Reference to the AOSS side-channel message RAM.
+ memory-region:
+ minItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
smd-edge: false
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Firmware name for the Hexagon core
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
index b934252cf02b..2c085ac2c3fb 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
@@ -39,8 +39,16 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle
description: Reference to the AOSS side-channel message RAM.
+ memory-region:
+ minItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
smd-edge: false
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Firmware name for the Hexagon core
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
index 853f97d6879f..af24f9a3cdf1 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
@@ -42,6 +42,14 @@ properties:
smd-edge: false
+ memory-region:
+ minItems: 1
+ description: Reference to the reserved-memory for the Hexagon core
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Firmware name for the Hexagon core
+
required:
- compatible
- reg
--
b4 0.10.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v3 1/5] dt-bindings: remoteproc: qcom: adsp: move memory-region and firmware-name out of pas-common
2022-12-07 19:23 ` [PATCH v3 1/5] dt-bindings: remoteproc: qcom: adsp: move memory-region and firmware-name out of pas-common Neil Armstrong
@ 2022-12-08 10:36 ` Krzysztof Kozlowski
0 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2022-12-08 10:36 UTC (permalink / raw)
To: Neil Armstrong, Amol Maheshwari, Srinivas Kandagatla,
Bjorn Andersson, Krzysztof Kozlowski, Andy Gross, Konrad Dybcio,
Rob Herring, Mathieu Poirier, Manivannan Sadhasivam
Cc: devicetree, linux-arm-msm, linux-remoteproc, Abel Vesa, linux-kernel
On 07/12/2022 20:23, Neil Armstrong wrote:
> Move memory-region and firmware-name definitions out of qcom,pas-common.yaml
> since they will be redefined differently for SM8550 PAS bindings documentation.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v3 2/5] dt-bindings: remoteproc: qcom: adsp: document sm8550 adsp, cdsp & mpss compatible
2022-12-07 19:23 [PATCH v3 0/5] remoteproc: qcom_q6v5_pas: add support for SM8550 adsp, cdsp & mpss Neil Armstrong
2022-12-07 19:23 ` [PATCH v3 1/5] dt-bindings: remoteproc: qcom: adsp: move memory-region and firmware-name out of pas-common Neil Armstrong
@ 2022-12-07 19:23 ` Neil Armstrong
2022-12-08 10:38 ` Krzysztof Kozlowski
2022-12-07 19:23 ` [PATCH v3 3/5] remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading Neil Armstrong
` (3 subsequent siblings)
5 siblings, 1 reply; 9+ messages in thread
From: Neil Armstrong @ 2022-12-07 19:23 UTC (permalink / raw)
To: Amol Maheshwari, Srinivas Kandagatla, Bjorn Andersson,
Krzysztof Kozlowski, Andy Gross, Konrad Dybcio, Rob Herring,
Mathieu Poirier, Manivannan Sadhasivam
Cc: devicetree, linux-arm-msm, Neil Armstrong, linux-remoteproc,
Abel Vesa, linux-kernel
This documents the compatible for the component used to boot the
aDSP, cDSP and MPSS on the SM8550 SoC.
The SM8550 boot process on SM8550 now requires a secondary "Devicetree"
firmware to be passed along the main Firmware, and the cDSP a new power
domain named "NSP".
A third memory domain for the DSM memory zone is also needed for the MPSS
PAS bindings.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../bindings/remoteproc/qcom,sm8550-pas.yaml | 178 +++++++++++++++++++++
1 file changed, 178 insertions(+)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
new file mode 100644
index 000000000000..ae612809e260
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sm8550-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Peripheral Authentication Service
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SM8550 SoC Peripheral Authentication Service loads and boots firmware
+ on the Qualcomm DSP Hexagon cores.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sm8550-adsp-pas
+ - qcom,sm8550-cdsp-pas
+ - qcom,sm8550-mpss-pas
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: XO clock
+
+ clock-names:
+ items:
+ - const: xo
+
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM.
+
+ smd-edge: false
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ items:
+ - description: Firmware name of the Hexagon core
+ - description: Firmware name of the Hexagon Devicetree
+
+ memory-region:
+ minItems: 2
+ items:
+ - description: Memory region for main Firmware authentication
+ - description: Memory region for Devicetree Firmware authentication
+ - description: DSM Memory region
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm8550-adsp-pas
+ - qcom,sm8550-cdsp-pas
+ then:
+ properties:
+ interrupts:
+ maxItems: 5
+ interrupt-names:
+ maxItems: 5
+ memory-region:
+ maxItems: 2
+ else:
+ properties:
+ interrupts:
+ minItems: 6
+ interrupt-names:
+ minItems: 6
+ memory-region:
+ minItems: 3
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm8550-adsp-pas
+ then:
+ properties:
+ power-domains:
+ items:
+ - description: LCX power domain
+ - description: LMX power domain
+ power-domain-names:
+ items:
+ - const: lcx
+ - const: lmx
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm8550-cdsp-pas
+ then:
+ properties:
+ power-domains:
+ items:
+ - description: CX power domain
+ - description: MXC power domain
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mxc
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm8550-mpss-pas
+ then:
+ properties:
+ power-domains:
+ items:
+ - description: CX power domain
+ - description: MXC power domain
+ - description: NSP power domain
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mxc
+ - const: nsp
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+ remoteproc@30000000 {
+ compatible = "qcom,sm8550-adsp-pas";
+ reg = <0x030000000 0x100>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ memory-region = <&adsp_mem>, <&dtb_adsp_mem>;
+
+ firmware-name = "qcom/sm8550/adsp.mbn",
+ "qcom/sm8550/adsp_dtb.mbn";
+
+ power-domains = <&rpmhpd_sm8550_lcx>,
+ <&rpmhpd_sm8550_lmx>;
+ power-domain-names = "lcx", "lmx";
+
+ qcom,qmp = <&aoss_qmp>;
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ /* ... */
+ };
+ };
--
b4 0.10.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v3 2/5] dt-bindings: remoteproc: qcom: adsp: document sm8550 adsp, cdsp & mpss compatible
2022-12-07 19:23 ` [PATCH v3 2/5] dt-bindings: remoteproc: qcom: adsp: document sm8550 adsp, cdsp & mpss compatible Neil Armstrong
@ 2022-12-08 10:38 ` Krzysztof Kozlowski
0 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2022-12-08 10:38 UTC (permalink / raw)
To: Neil Armstrong, Amol Maheshwari, Srinivas Kandagatla,
Bjorn Andersson, Krzysztof Kozlowski, Andy Gross, Konrad Dybcio,
Rob Herring, Mathieu Poirier, Manivannan Sadhasivam
Cc: devicetree, linux-arm-msm, linux-remoteproc, Abel Vesa, linux-kernel
On 07/12/2022 20:23, Neil Armstrong wrote:
> This documents the compatible for the component used to boot the
> aDSP, cDSP and MPSS on the SM8550 SoC.
>
> The SM8550 boot process on SM8550 now requires a secondary "Devicetree"
> firmware to be passed along the main Firmware, and the cDSP a new power
> domain named "NSP".
>
> A third memory domain for the DSM memory zone is also needed for the MPSS
> PAS bindings.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v3 3/5] remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading
2022-12-07 19:23 [PATCH v3 0/5] remoteproc: qcom_q6v5_pas: add support for SM8550 adsp, cdsp & mpss Neil Armstrong
2022-12-07 19:23 ` [PATCH v3 1/5] dt-bindings: remoteproc: qcom: adsp: move memory-region and firmware-name out of pas-common Neil Armstrong
2022-12-07 19:23 ` [PATCH v3 2/5] dt-bindings: remoteproc: qcom: adsp: document sm8550 adsp, cdsp & mpss compatible Neil Armstrong
@ 2022-12-07 19:23 ` Neil Armstrong
2022-12-07 19:23 ` [PATCH v3 4/5] remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware Neil Armstrong
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Neil Armstrong @ 2022-12-07 19:23 UTC (permalink / raw)
To: Amol Maheshwari, Srinivas Kandagatla, Bjorn Andersson,
Krzysztof Kozlowski, Andy Gross, Konrad Dybcio, Rob Herring,
Mathieu Poirier, Manivannan Sadhasivam
Cc: devicetree, linux-arm-msm, Neil Armstrong, linux-remoteproc,
Abel Vesa, linux-kernel
Starting from the SM8550 SoC, starting the aDSP, cDSP and MPSS will
require loading a separate "Devicetree" firmware.
In order to satisfy the load & authentication order required by the SM8550
SoC, the following is implemented:
- "Devicetree" firmware request & load in dedicated memory
- Q6V5 prepare
- Power Domain & Clocks enable
- "Devicetree" firmware authentication
- Main firmware load in dedicated memory
- Main firmware authentication
- Q6V5 startup
- "Devicetree" firmware metadata release
- Main metadata release
When booting older platforms, the "Devicetree" steps would be
bypassed and the load & authentication order would still be valid.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/remoteproc/qcom_q6v5_pas.c | 134 +++++++++++++++++++++++++++++++++----
1 file changed, 121 insertions(+), 13 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 6afd0941e552..4fe09c7f25bd 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -35,7 +35,9 @@
struct adsp_data {
int crash_reason_smem;
const char *firmware_name;
+ const char *dtb_firmware_name;
int pas_id;
+ int dtb_pas_id;
unsigned int minidump_id;
bool has_aggre2_clk;
bool auto_boot;
@@ -65,20 +67,29 @@ struct qcom_adsp {
int proxy_pd_count;
+ const char *dtb_firmware_name;
int pas_id;
+ int dtb_pas_id;
unsigned int minidump_id;
int crash_reason_smem;
bool has_aggre2_clk;
bool decrypt_shutdown;
const char *info_name;
+ const struct firmware *firmware;
+ const struct firmware *dtb_firmware;
+
struct completion start_done;
struct completion stop_done;
phys_addr_t mem_phys;
+ phys_addr_t dtb_mem_phys;
phys_addr_t mem_reloc;
+ phys_addr_t dtb_mem_reloc;
void *mem_region;
+ void *dtb_mem_region;
size_t mem_size;
+ size_t dtb_mem_size;
struct qcom_rproc_glink glink_subdev;
struct qcom_rproc_subdev smd_subdev;
@@ -86,6 +97,7 @@ struct qcom_adsp {
struct qcom_sysmon *sysmon;
struct qcom_scm_pas_metadata pas_metadata;
+ struct qcom_scm_pas_metadata dtb_pas_metadata;
};
static void adsp_minidump(struct rproc *rproc)
@@ -160,6 +172,8 @@ static int adsp_unprepare(struct rproc *rproc)
* here.
*/
qcom_scm_pas_metadata_release(&adsp->pas_metadata);
+ if (adsp->dtb_pas_id)
+ qcom_scm_pas_metadata_release(&adsp->dtb_pas_metadata);
return 0;
}
@@ -169,20 +183,40 @@ static int adsp_load(struct rproc *rproc, const struct firmware *fw)
struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
int ret;
- ret = qcom_mdt_pas_init(adsp->dev, fw, rproc->firmware, adsp->pas_id,
- adsp->mem_phys, &adsp->pas_metadata);
- if (ret)
- return ret;
+ /* Store firmware handle to be used in adsp_start() */
+ adsp->firmware = fw;
- ret = qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, adsp->pas_id,
- adsp->mem_region, adsp->mem_phys, adsp->mem_size,
- &adsp->mem_reloc);
- if (ret)
- return ret;
+ if (adsp->dtb_pas_id) {
+ ret = request_firmware(&adsp->dtb_firmware, adsp->dtb_firmware_name, adsp->dev);
+ if (ret) {
+ dev_err(adsp->dev, "request_firmware failed for %s: %d\n",
+ adsp->dtb_firmware_name, ret);
+ return ret;
+ }
- qcom_pil_info_store(adsp->info_name, adsp->mem_phys, adsp->mem_size);
+ ret = qcom_mdt_pas_init(adsp->dev, adsp->dtb_firmware, adsp->dtb_firmware_name,
+ adsp->dtb_pas_id, adsp->dtb_mem_phys,
+ &adsp->dtb_pas_metadata);
+ if (ret)
+ goto release_dtb_firmware;
+
+ ret = qcom_mdt_load_no_init(adsp->dev, adsp->dtb_firmware, adsp->dtb_firmware_name,
+ adsp->dtb_pas_id, adsp->dtb_mem_region,
+ adsp->dtb_mem_phys, adsp->dtb_mem_size,
+ &adsp->dtb_mem_reloc);
+ if (ret)
+ goto release_dtb_metadata;
+ }
return 0;
+
+release_dtb_metadata:
+ qcom_scm_pas_metadata_release(&adsp->dtb_pas_metadata);
+
+release_dtb_firmware:
+ release_firmware(adsp->dtb_firmware);
+
+ return ret;
}
static int adsp_start(struct rproc *rproc)
@@ -218,24 +252,55 @@ static int adsp_start(struct rproc *rproc)
goto disable_cx_supply;
}
+ if (adsp->dtb_pas_id) {
+ ret = qcom_scm_pas_auth_and_reset(adsp->dtb_pas_id);
+ if (ret) {
+ dev_err(adsp->dev,
+ "failed to authenticate dtb image and release reset\n");
+ goto disable_px_supply;
+ }
+ }
+
+ ret = qcom_mdt_pas_init(adsp->dev, adsp->firmware, rproc->firmware, adsp->pas_id,
+ adsp->mem_phys, &adsp->pas_metadata);
+ if (ret)
+ goto disable_px_supply;
+
+ ret = qcom_mdt_load_no_init(adsp->dev, adsp->firmware, rproc->firmware, adsp->pas_id,
+ adsp->mem_region, adsp->mem_phys, adsp->mem_size,
+ &adsp->mem_reloc);
+ if (ret)
+ goto release_pas_metadata;
+
+ qcom_pil_info_store(adsp->info_name, adsp->mem_phys, adsp->mem_size);
+
ret = qcom_scm_pas_auth_and_reset(adsp->pas_id);
if (ret) {
dev_err(adsp->dev,
"failed to authenticate image and release reset\n");
- goto disable_px_supply;
+ goto release_pas_metadata;
}
ret = qcom_q6v5_wait_for_start(&adsp->q6v5, msecs_to_jiffies(5000));
if (ret == -ETIMEDOUT) {
dev_err(adsp->dev, "start timed out\n");
qcom_scm_pas_shutdown(adsp->pas_id);
- goto disable_px_supply;
+ goto release_pas_metadata;
}
qcom_scm_pas_metadata_release(&adsp->pas_metadata);
+ if (adsp->dtb_pas_id)
+ qcom_scm_pas_metadata_release(&adsp->dtb_pas_metadata);
+
+ /* Remove pointer to the loaded firmware, only valid in adsp_load() & adsp_start() */
+ adsp->firmware = NULL;
return 0;
+release_pas_metadata:
+ qcom_scm_pas_metadata_release(&adsp->pas_metadata);
+ if (adsp->dtb_pas_id)
+ qcom_scm_pas_metadata_release(&adsp->dtb_pas_metadata);
disable_px_supply:
if (adsp->px_supply)
regulator_disable(adsp->px_supply);
@@ -251,6 +316,9 @@ static int adsp_start(struct rproc *rproc)
disable_irqs:
qcom_q6v5_unprepare(&adsp->q6v5);
+ /* Remove pointer to the loaded firmware, only valid in adsp_load() & adsp_start() */
+ adsp->firmware = NULL;
+
return ret;
}
@@ -284,6 +352,12 @@ static int adsp_stop(struct rproc *rproc)
if (ret)
dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
+ if (adsp->dtb_pas_id) {
+ ret = qcom_scm_pas_shutdown(adsp->dtb_pas_id);
+ if (ret)
+ dev_err(adsp->dev, "failed to shutdown dtb: %d\n", ret);
+ }
+
handover = qcom_q6v5_unprepare(&adsp->q6v5);
if (handover)
qcom_pas_handover(&adsp->q6v5);
@@ -461,6 +535,28 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
return -EBUSY;
}
+ if (!adsp->dtb_pas_id)
+ return 0;
+
+ node = of_parse_phandle(adsp->dev->of_node, "memory-region", 1);
+ if (!node) {
+ dev_err(adsp->dev, "no dtb memory-region specified\n");
+ return -EINVAL;
+ }
+
+ ret = of_address_to_resource(node, 0, &r);
+ if (ret)
+ return ret;
+
+ adsp->dtb_mem_phys = adsp->dtb_mem_reloc = r.start;
+ adsp->dtb_mem_size = resource_size(&r);
+ adsp->dtb_mem_region = devm_ioremap_wc(adsp->dev, adsp->dtb_mem_phys, adsp->dtb_mem_size);
+ if (!adsp->dtb_mem_region) {
+ dev_err(adsp->dev, "unable to map dtb memory region: %pa+%zx\n",
+ &r.start, adsp->dtb_mem_size);
+ return -EBUSY;
+ }
+
return 0;
}
@@ -469,7 +565,7 @@ static int adsp_probe(struct platform_device *pdev)
const struct adsp_data *desc;
struct qcom_adsp *adsp;
struct rproc *rproc;
- const char *fw_name;
+ const char *fw_name, *dtb_fw_name = NULL;
const struct rproc_ops *ops = &adsp_ops;
int ret;
@@ -486,6 +582,14 @@ static int adsp_probe(struct platform_device *pdev)
if (ret < 0 && ret != -EINVAL)
return ret;
+ if (desc->dtb_firmware_name) {
+ dtb_fw_name = desc->dtb_firmware_name;
+ ret = of_property_read_string_index(pdev->dev.of_node, "firmware-name", 1,
+ &dtb_fw_name);
+ if (ret < 0 && ret != -EINVAL)
+ return ret;
+ }
+
if (desc->minidump_id)
ops = &adsp_minidump_ops;
@@ -507,6 +611,10 @@ static int adsp_probe(struct platform_device *pdev)
adsp->has_aggre2_clk = desc->has_aggre2_clk;
adsp->info_name = desc->sysmon_name;
adsp->decrypt_shutdown = desc->decrypt_shutdown;
+ if (dtb_fw_name) {
+ adsp->dtb_firmware_name = dtb_fw_name;
+ adsp->dtb_pas_id = desc->dtb_pas_id;
+ }
platform_set_drvdata(pdev, adsp);
ret = device_init_wakeup(adsp->dev, true);
--
b4 0.10.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 4/5] remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware
2022-12-07 19:23 [PATCH v3 0/5] remoteproc: qcom_q6v5_pas: add support for SM8550 adsp, cdsp & mpss Neil Armstrong
` (2 preceding siblings ...)
2022-12-07 19:23 ` [PATCH v3 3/5] remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading Neil Armstrong
@ 2022-12-07 19:23 ` Neil Armstrong
2022-12-07 19:23 ` [PATCH v3 5/5] remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data Neil Armstrong
2023-01-09 10:08 ` [PATCH v3 0/5] remoteproc: qcom_q6v5_pas: add support for SM8550 adsp, cdsp & mpss Neil Armstrong
5 siblings, 0 replies; 9+ messages in thread
From: Neil Armstrong @ 2022-12-07 19:23 UTC (permalink / raw)
To: Amol Maheshwari, Srinivas Kandagatla, Bjorn Andersson,
Krzysztof Kozlowski, Andy Gross, Konrad Dybcio, Rob Herring,
Mathieu Poirier, Manivannan Sadhasivam
Cc: devicetree, linux-arm-msm, Neil Armstrong, linux-remoteproc,
Abel Vesa, linux-kernel
Starting with SM8550, the DSM memory must now be shared to the
firmware by the APPS process instead of beeing defined in the
carveout memory reserved for MPSS.
In order to handle that, add a region_assign_idx in adsp_data
to specify with index of memory-region must be assigned to
the MPSS via the qcom_scm_assign_mem() call at probe time.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/remoteproc/qcom_q6v5_pas.c | 71 ++++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 4fe09c7f25bd..d6a288432b6c 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -49,6 +49,8 @@ struct adsp_data {
const char *ssr_name;
const char *sysmon_name;
int ssctl_id;
+
+ int region_assign_idx;
};
struct qcom_adsp {
@@ -86,10 +88,15 @@ struct qcom_adsp {
phys_addr_t dtb_mem_phys;
phys_addr_t mem_reloc;
phys_addr_t dtb_mem_reloc;
+ phys_addr_t region_assign_phys;
void *mem_region;
void *dtb_mem_region;
size_t mem_size;
size_t dtb_mem_size;
+ size_t region_assign_size;
+
+ int region_assign_idx;
+ int region_assign_perms;
struct qcom_rproc_glink glink_subdev;
struct qcom_rproc_subdev smd_subdev;
@@ -560,6 +567,64 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
return 0;
}
+static int adsp_assign_memory_region(struct qcom_adsp *adsp)
+{
+ struct qcom_scm_vmperm perm;
+ struct device_node *node;
+ struct resource r;
+ int ret;
+
+ if (!adsp->region_assign_idx)
+ return 0;
+
+ node = of_parse_phandle(adsp->dev->of_node, "memory-region", adsp->region_assign_idx);
+ if (!node) {
+ dev_err(adsp->dev, "missing shareable memory-region\n");
+ return -EINVAL;
+ }
+
+ ret = of_address_to_resource(node, 0, &r);
+ if (ret)
+ return ret;
+
+ perm.vmid = QCOM_SCM_VMID_MSS_MSA;
+ perm.perm = QCOM_SCM_PERM_RW;
+
+ adsp->region_assign_phys = r.start;
+ adsp->region_assign_size = resource_size(&r);
+ adsp->region_assign_perms = BIT(QCOM_SCM_VMID_HLOS);
+
+ ret = qcom_scm_assign_mem(adsp->region_assign_phys,
+ adsp->region_assign_size,
+ &adsp->region_assign_perms,
+ &perm, 1);
+ if (ret < 0) {
+ dev_err(adsp->dev, "assign memory failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void adsp_unassign_memory_region(struct qcom_adsp *adsp)
+{
+ struct qcom_scm_vmperm perm;
+ int ret;
+
+ if (!adsp->region_assign_idx)
+ return;
+
+ perm.vmid = QCOM_SCM_VMID_HLOS;
+ perm.perm = QCOM_SCM_PERM_RW;
+
+ ret = qcom_scm_assign_mem(adsp->region_assign_phys,
+ adsp->region_assign_size,
+ &adsp->region_assign_perms,
+ &perm, 1);
+ if (ret < 0)
+ dev_err(adsp->dev, "unassign memory failed\n");
+}
+
static int adsp_probe(struct platform_device *pdev)
{
const struct adsp_data *desc;
@@ -611,6 +676,7 @@ static int adsp_probe(struct platform_device *pdev)
adsp->has_aggre2_clk = desc->has_aggre2_clk;
adsp->info_name = desc->sysmon_name;
adsp->decrypt_shutdown = desc->decrypt_shutdown;
+ adsp->region_assign_idx = desc->region_assign_idx;
if (dtb_fw_name) {
adsp->dtb_firmware_name = dtb_fw_name;
adsp->dtb_pas_id = desc->dtb_pas_id;
@@ -625,6 +691,10 @@ static int adsp_probe(struct platform_device *pdev)
if (ret)
goto free_rproc;
+ ret = adsp_assign_memory_region(adsp);
+ if (ret)
+ goto free_rproc;
+
ret = adsp_init_clock(adsp);
if (ret)
goto free_rproc;
@@ -676,6 +746,7 @@ static int adsp_remove(struct platform_device *pdev)
rproc_del(adsp->rproc);
qcom_q6v5_deinit(&adsp->q6v5);
+ adsp_unassign_memory_region(adsp);
qcom_remove_glink_subdev(adsp->rproc, &adsp->glink_subdev);
qcom_remove_sysmon_subdev(adsp->sysmon);
qcom_remove_smd_subdev(adsp->rproc, &adsp->smd_subdev);
--
b4 0.10.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 5/5] remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data
2022-12-07 19:23 [PATCH v3 0/5] remoteproc: qcom_q6v5_pas: add support for SM8550 adsp, cdsp & mpss Neil Armstrong
` (3 preceding siblings ...)
2022-12-07 19:23 ` [PATCH v3 4/5] remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware Neil Armstrong
@ 2022-12-07 19:23 ` Neil Armstrong
2023-01-09 10:08 ` [PATCH v3 0/5] remoteproc: qcom_q6v5_pas: add support for SM8550 adsp, cdsp & mpss Neil Armstrong
5 siblings, 0 replies; 9+ messages in thread
From: Neil Armstrong @ 2022-12-07 19:23 UTC (permalink / raw)
To: Amol Maheshwari, Srinivas Kandagatla, Bjorn Andersson,
Krzysztof Kozlowski, Andy Gross, Konrad Dybcio, Rob Herring,
Mathieu Poirier, Manivannan Sadhasivam
Cc: devicetree, linux-arm-msm, Neil Armstrong, linux-remoteproc,
Abel Vesa, linux-kernel
This adds the compatible & data for the aDSP, cDSP and MPSS found in
the SM8550 SoC.
This platform requires the "Devicetree" firmware to be loaded along the
main firmware.
The MPSS DSM memory to be assigned to the MPSS subsystem is the
third memory-region entry as defined in the bindings.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/remoteproc/qcom_q6v5_pas.c | 66 ++++++++++++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index d6a288432b6c..2a29ffad83eb 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -1125,6 +1125,69 @@ static const struct adsp_data sm8450_mpss_resource = {
.ssctl_id = 0x12,
};
+static const struct adsp_data sm8550_adsp_resource = {
+ .crash_reason_smem = 423,
+ .firmware_name = "adsp.mdt",
+ .dtb_firmware_name = "adsp_dtb.mdt",
+ .pas_id = 1,
+ .dtb_pas_id = 0x24,
+ .minidump_id = 5,
+ .has_aggre2_clk = false,
+ .auto_boot = false,
+ .proxy_pd_names = (char*[]){
+ "lcx",
+ "lmx",
+ NULL
+ },
+ .load_state = "adsp",
+ .ssr_name = "lpass",
+ .sysmon_name = "adsp",
+ .ssctl_id = 0x14,
+};
+
+static const struct adsp_data sm8550_cdsp_resource = {
+ .crash_reason_smem = 601,
+ .firmware_name = "cdsp.mdt",
+ .dtb_firmware_name = "cdsp_dtb.mdt",
+ .pas_id = 18,
+ .dtb_pas_id = 0x25,
+ .minidump_id = 7,
+ .has_aggre2_clk = false,
+ .auto_boot = false,
+ .proxy_pd_names = (char*[]){
+ "cx",
+ "mxc",
+ "nsp",
+ NULL
+ },
+ .load_state = "cdsp",
+ .ssr_name = "cdsp",
+ .sysmon_name = "cdsp",
+ .ssctl_id = 0x17,
+};
+
+static const struct adsp_data sm8550_mpss_resource = {
+ .crash_reason_smem = 421,
+ .firmware_name = "modem.mdt",
+ .dtb_firmware_name = "modem_dtb.mdt",
+ .pas_id = 4,
+ .dtb_pas_id = 0x26,
+ .minidump_id = 3,
+ .has_aggre2_clk = false,
+ .auto_boot = false,
+ .decrypt_shutdown = true,
+ .proxy_pd_names = (char*[]){
+ "cx",
+ "mss",
+ NULL
+ },
+ .load_state = "modem",
+ .ssr_name = "mpss",
+ .sysmon_name = "modem",
+ .ssctl_id = 0x12,
+ .region_assign_idx = 2,
+};
+
static const struct of_device_id adsp_of_match[] = {
{ .compatible = "qcom,msm8226-adsp-pil", .data = &adsp_resource_init},
{ .compatible = "qcom,msm8974-adsp-pil", .data = &adsp_resource_init},
@@ -1165,6 +1228,9 @@ static const struct of_device_id adsp_of_match[] = {
{ .compatible = "qcom,sm8450-cdsp-pas", .data = &sm8350_cdsp_resource},
{ .compatible = "qcom,sm8450-slpi-pas", .data = &sm8350_slpi_resource},
{ .compatible = "qcom,sm8450-mpss-pas", .data = &sm8450_mpss_resource},
+ { .compatible = "qcom,sm8550-adsp-pas", .data = &sm8550_adsp_resource},
+ { .compatible = "qcom,sm8550-cdsp-pas", .data = &sm8550_cdsp_resource},
+ { .compatible = "qcom,sm8550-mpss-pas", .data = &sm8550_mpss_resource},
{ },
};
MODULE_DEVICE_TABLE(of, adsp_of_match);
--
b4 0.10.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v3 0/5] remoteproc: qcom_q6v5_pas: add support for SM8550 adsp, cdsp & mpss
2022-12-07 19:23 [PATCH v3 0/5] remoteproc: qcom_q6v5_pas: add support for SM8550 adsp, cdsp & mpss Neil Armstrong
` (4 preceding siblings ...)
2022-12-07 19:23 ` [PATCH v3 5/5] remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data Neil Armstrong
@ 2023-01-09 10:08 ` Neil Armstrong
5 siblings, 0 replies; 9+ messages in thread
From: Neil Armstrong @ 2023-01-09 10:08 UTC (permalink / raw)
To: Amol Maheshwari, Srinivas Kandagatla, Bjorn Andersson,
Krzysztof Kozlowski, Andy Gross, Konrad Dybcio, Rob Herring,
Mathieu Poirier, Manivannan Sadhasivam
Cc: devicetree, linux-arm-msm, linux-remoteproc, Abel Vesa, linux-kernel
On 07/12/2022 20:23, Neil Armstrong wrote:
> This patchsets adds support for the aDSP, cDSP and MPSS found in the
> SM8550 SoC.
>
> The aDSP, cDSP and MPSS boot process on SM8550 now requires a secondary
> "Devicetree" firmware to be passed along the main Firmware, and the cDSP
> a new power domain named "NSP".
>
> In order to satisfy the load & authentication order required by the SM8550
> SoC, the following is implemented:
> - "Devicetree" firmware request & load in dedicated memory
> - Q6V5 prepare
> - Power Domain & Clocks enable
> - "Devicetree" firmware authentication
> - Main firmware load in dedicated memory
> - Main firmware authentication
> - Q6V5 startup
> - "Devicetree" firmware metadata release
> - Main metadata release
>
> When booting older platforms, the "Devicetree" steps would be
> bypassed and the load & authentication order would still be valid.
>
> Bindings changes depends on:
> - https://lore.kernel.org/all/20221124184333.133911-1-krzysztof.kozlowski@linaro.org/
>
> To: Andy Gross <agross@kernel.org>
> To: Bjorn Andersson <andersson@kernel.org>
> To: Konrad Dybcio <konrad.dybcio@somainline.org>
> To: Mathieu Poirier <mathieu.poirier@linaro.org>
> To: Rob Herring <robh+dt@kernel.org>
> To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> To: Manivannan Sadhasivam <mani@kernel.org>
> To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> To: Amol Maheshwari <amahesh@qti.qualcomm.com>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-remoteproc@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: Abel Vesa <abel.vesa@linaro.org>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>
> ---
> Changes in v3:
> - fix mpss matching in bindings, tested against DT
> - Link to v2: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-remoteproc-v2-0-12bc22255474@linaro.org
>
> Changes in v2:
> - Moved the SM8550 pas bindings on top of "split and reorganize PAS/PIL" v3 patchset
> - Incorporated DSM memory support into pas bindings & driver
> - Moved second DTB firmware into second entry of firmware-name
> - Dropped applied "qcom,fastrpc: increase allowed iommus entries" patch
> - Link to v1: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-remoteproc-v1-0-104c34cb3b91@linaro.org
>
> ---
> Neil Armstrong (5):
> dt-bindings: remoteproc: qcom: adsp: move memory-region and firmware-name out of pas-common
> dt-bindings: remoteproc: qcom: adsp: document sm8550 adsp, cdsp & mpss compatible
> remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading
> remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware
> remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data
>
> .../devicetree/bindings/remoteproc/qcom,adsp.yaml | 4 +
> .../bindings/remoteproc/qcom,pas-common.yaml | 8 -
> .../bindings/remoteproc/qcom,qcs404-pas.yaml | 8 +
> .../bindings/remoteproc/qcom,sc7180-pas.yaml | 8 +
> .../bindings/remoteproc/qcom,sc8180x-pas.yaml | 8 +
> .../bindings/remoteproc/qcom,sc8280xp-pas.yaml | 8 +
> .../bindings/remoteproc/qcom,sdx55-pas.yaml | 8 +
> .../bindings/remoteproc/qcom,sm6350-pas.yaml | 8 +
> .../bindings/remoteproc/qcom,sm8150-pas.yaml | 8 +
> .../bindings/remoteproc/qcom,sm8350-pas.yaml | 8 +
> .../bindings/remoteproc/qcom,sm8550-pas.yaml | 178 ++++++++++++++
> drivers/remoteproc/qcom_q6v5_pas.c | 271 ++++++++++++++++++++-
> 12 files changed, 504 insertions(+), 21 deletions(-)
> ---
> base-commit: 268975e1af25cd83994d24c46ad0d95753291f64
> change-id: 20221114-narmstrong-sm8550-upstream-remoteproc-804f3fbb34bf
>
> Best regards,
Gentle ping,
Thanks,
Neil
^ permalink raw reply [flat|nested] 9+ messages in thread