* [PATCH 1/2] arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators
@ 2022-11-14 14:36 Konrad Dybcio
2022-11-14 14:36 ` [PATCH 2/2] arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3 Konrad Dybcio
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Konrad Dybcio @ 2022-11-14 14:36 UTC (permalink / raw)
To: linux-arm-msm, andersson, agross, krzysztof.kozlowski
Cc: patches, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
devicetree, linux-kernel
From: Konrad Dybcio <konrad.dybcio@somainline.org>
Configure most RPMh-controlled regulators on SoMC Sagami. The missing
ones (on pm8350b and pm8008[ij]) will be configured when driver support
is added. Thankfully, it looks like PDX215 and PDX214 don't have any
differences when it comes to PM8350/PM8350C/PMR735a.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
.../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 350 ++++++++++++++++++
1 file changed, 350 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index 93e88c40b3b9..f118caab3d42 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -3,6 +3,7 @@
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
*/
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8350.dtsi"
#include "pm8350.dtsi"
#include "pm8350b.dtsi"
@@ -73,6 +74,16 @@ ramoops@ffc00000 {
no-map;
};
};
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&adsp {
@@ -80,6 +91,345 @@ &adsp {
firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
};
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+
+ vdd-l1-l4-supply = <&pm8350_s11>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-l5-supply = <&vreg_bob>;
+ vdd-l6-l9-l10-supply = <&pm8350_s11>;
+
+ /*
+ * ARC regulators:
+ * S5 - mx.lvl
+ * S6 - gfx.lvl
+ * S9 - mxc.lvl
+ */
+
+ pm8350_s10: smps10 {
+ regulator-name = "pm8350_s10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_s11: smps11 {
+ regulator-name = "pm8350_s11";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_s12: smps12 {
+ regulator-name = "pm8350_s12";
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l1: ldo1 {
+ regulator-name = "pm8350_l1";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l2: ldo2 {
+ regulator-name = "pm8350_l2";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l3: ldo3 {
+ regulator-name = "pm8350_l3";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L4 - lmx.lvl (ARC) */
+
+ pm8350_l5: ldo5 {
+ regulator-name = "pm8350_l5";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <888000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ pm8350_l6: ldo6 {
+ regulator-name = "pm8350_l6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1208000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ pm8350_l7: ldo7 {
+ regulator-name = "pm8350_l7";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ /* L8 - lcx.lvl (ARC) */
+
+ pm8350_l9: ldo9 {
+ regulator-name = "pm8350_l9";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l12-supply = <&pm8350c_s1>;
+ vdd-l2-l8-supply = <&pm8350c_s1>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+ vdd-l10-supply = <&pm8350_s12>;
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ pm8350c_s1: smps1 {
+ regulator-name = "pm8350c_s1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* S2 - ebi.lvl (ARC) */
+
+ pm8350c_s3: smps3 {
+ regulator-name = "pm8350c_s3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /*
+ * ARC regulators:
+ * S4 - mss.lvl
+ * S6 - cx.lvl
+ * S8 - mmcx.lvl
+ */
+
+ pm8350c_s10: smps10 {
+ regulator-name = "pm8350c_s10";
+ regulator-min-microvolt = <1048000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l1: ldo1 {
+ regulator-name = "pm8350c_l1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l2: ldo2 {
+ regulator-name = "pm8350c_l2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l3: ldo3 {
+ regulator-name = "pm8350c_l3";
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l4: ldo4 {
+ regulator-name = "pm8350c_l4";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l5: ldo5 {
+ regulator-name = "pm8350c_l5";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l6: ldo6 {
+ regulator-name = "pm8350c_l6";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l7: ldo7 {
+ regulator-name = "pm8350c_l7";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l8: ldo8 {
+ regulator-name = "pm8350c_l8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l9: ldo9 {
+ regulator-name = "pm8350c_l9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l10: ldo10 {
+ regulator-name = "pm8350c_l10";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l11: ldo11 {
+ regulator-name = "pm8350c_l11";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l12: ldo12 {
+ regulator-name = "pm8350c_l12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l13: ldo13 {
+ regulator-name = "pm8350c_l13";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3400000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+ };
+
+ /* TODO: Add pm8350b (just one ldo) once the driver part is in */
+
+ regulators-2 {
+ compatible = "qcom,pmr735a-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+
+ vdd-l1-l2-supply = <&pmr735a_s2>;
+ vdd-l3-supply = <&pmr735a_s1>;
+ vdd-l4-supply = <&pm8350c_s1>;
+ vdd-l5-l6-supply = <&pm8350c_s1>;
+ vdd-l7-bob-supply = <&vreg_bob>;
+
+ pmr735a_s1: smps1 {
+ regulator-name = "pmr735a_s1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1280000>;
+ };
+
+ pmr735a_s2: smps2 {
+ regulator-name = "pmr735a_s2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <976000>;
+ };
+
+ pmr735a_s3: smps3 {
+ regulator-name = "pmr735a_s3";
+ regulator-min-microvolt = <2208000>;
+ regulator-max-microvolt = <2352000>;
+ };
+
+ pmr735a_l1: ldo1 {
+ regulator-name = "pmr735a_l1";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ };
+
+ pmr735a_l2: ldo2 {
+ regulator-name = "pmr735a_l2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pmr735a_l3: ldo3 {
+ regulator-name = "pmr735a_l3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pmr735a_l4: ldo4 {
+ regulator-name = "pmr735a_l4";
+ regulator-min-microvolt = <1776000>;
+ regulator-max-microvolt = <1872000>;
+ };
+
+ pmr735a_l5: ldo5 {
+ regulator-name = "pmr735a_l5";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ pmr735a_l6: ldo6 {
+ regulator-name = "pmr735a_l6";
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <904000>;
+ };
+
+ pmr735a_l7: ldo7 {
+ regulator-name = "pmr735a_l7";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+};
+
&cdsp {
status = "okay";
firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
--
2.38.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3
2022-11-14 14:36 [PATCH 1/2] arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators Konrad Dybcio
@ 2022-11-14 14:36 ` Konrad Dybcio
2022-11-14 14:38 ` [PATCH 1/2] arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators Konrad Dybcio
2022-11-15 17:46 ` (subset) " Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Konrad Dybcio @ 2022-11-14 14:36 UTC (permalink / raw)
To: linux-arm-msm, andersson, agross, krzysztof.kozlowski
Cc: patches, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
devicetree, linux-kernel, Konrad Dybcio
Wire up necessary supplies to USB PHYs to enable USB3 on Sagami and
remove all the limit-to-USB2 properties.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index f118caab3d42..4dcaeb7f9bc8 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -597,25 +597,25 @@ ts_int_default: ts-int-default-state {
&ufs_mem_hc { status = "disabled"; };
&ufs_mem_phy { status = "disabled"; };
-/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */
&usb_1 {
status = "okay";
-
- qcom,select-utmi-as-pipe-clk;
};
&usb_1_dwc3 {
dr_mode = "peripheral";
-
- maximum-speed = "high-speed";
- phys = <&usb_1_hsphy>;
- phy-names = "usb2-phy";
};
&usb_1_hsphy {
status = "okay";
+
+ vdda-pll-supply = <&pm8350_l5>;
+ vdda18-supply = <&pm8350c_l1>;
+ vdda33-supply = <&pm8350_l2>;
};
&usb_1_qmpphy {
status = "okay";
+
+ vdda-phy-supply = <&pm8350_l6>;
+ vdda-pll-supply = <&pm8350_l1>;
};
--
2.38.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators
2022-11-14 14:36 [PATCH 1/2] arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators Konrad Dybcio
2022-11-14 14:36 ` [PATCH 2/2] arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3 Konrad Dybcio
@ 2022-11-14 14:38 ` Konrad Dybcio
2022-11-15 17:46 ` (subset) " Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Konrad Dybcio @ 2022-11-14 14:38 UTC (permalink / raw)
To: Konrad Dybcio, linux-arm-msm, andersson, agross, krzysztof.kozlowski
Cc: patches, Rob Herring, Krzysztof Kozlowski, devicetree, linux-kernel
On 14/11/2022 15:36, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@somainline.org>
>
> Configure most RPMh-controlled regulators on SoMC Sagami. The missing
> ones (on pm8350b and pm8008[ij]) will be configured when driver support
> is added. Thankfully, it looks like PDX215 and PDX214 don't have any
> differences when it comes to PM8350/PM8350C/PMR735a.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> ---
Missing second S-o-b, sorry:
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> .../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 350 ++++++++++++++++++
> 1 file changed, 350 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> index 93e88c40b3b9..f118caab3d42 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> @@ -3,6 +3,7 @@
> * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
> */
>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> #include "sm8350.dtsi"
> #include "pm8350.dtsi"
> #include "pm8350b.dtsi"
> @@ -73,6 +74,16 @@ ramoops@ffc00000 {
> no-map;
> };
> };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> };
>
> &adsp {
> @@ -80,6 +91,345 @@ &adsp {
> firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
> };
>
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm8350-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-s9-supply = <&vph_pwr>;
> + vdd-s10-supply = <&vph_pwr>;
> + vdd-s11-supply = <&vph_pwr>;
> + vdd-s12-supply = <&vph_pwr>;
> +
> + vdd-l1-l4-supply = <&pm8350_s11>;
> + vdd-l2-l7-supply = <&vreg_bob>;
> + vdd-l3-l5-supply = <&vreg_bob>;
> + vdd-l6-l9-l10-supply = <&pm8350_s11>;
> +
> + /*
> + * ARC regulators:
> + * S5 - mx.lvl
> + * S6 - gfx.lvl
> + * S9 - mxc.lvl
> + */
> +
> + pm8350_s10: smps10 {
> + regulator-name = "pm8350_s10";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350_s11: smps11 {
> + regulator-name = "pm8350_s11";
> + regulator-min-microvolt = <752000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350_s12: smps12 {
> + regulator-name = "pm8350_s12";
> + regulator-min-microvolt = <1224000>;
> + regulator-max-microvolt = <1360000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350_l1: ldo1 {
> + regulator-name = "pm8350_l1";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350_l2: ldo2 {
> + regulator-name = "pm8350_l2";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350_l3: ldo3 {
> + regulator-name = "pm8350_l3";
> + regulator-min-microvolt = <904000>;
> + regulator-max-microvolt = <904000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* L4 - lmx.lvl (ARC) */
> +
> + pm8350_l5: ldo5 {
> + regulator-name = "pm8350_l5";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <888000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + pm8350_l6: ldo6 {
> + regulator-name = "pm8350_l6";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1208000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + pm8350_l7: ldo7 {
> + regulator-name = "pm8350_l7";
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + /* L8 - lcx.lvl (ARC) */
> +
> + pm8350_l9: ldo9 {
> + regulator-name = "pm8350_l9";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> + };
> +
> + regulators-1 {
> + compatible = "qcom,pm8350c-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-s9-supply = <&vph_pwr>;
> + vdd-s10-supply = <&vph_pwr>;
> +
> + vdd-l1-l12-supply = <&pm8350c_s1>;
> + vdd-l2-l8-supply = <&pm8350c_s1>;
> + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
> + vdd-l6-l9-l11-supply = <&vreg_bob>;
> + vdd-l10-supply = <&pm8350_s12>;
> +
> + vdd-bob-supply = <&vph_pwr>;
> +
> + pm8350c_s1: smps1 {
> + regulator-name = "pm8350c_s1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1952000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* S2 - ebi.lvl (ARC) */
> +
> + pm8350c_s3: smps3 {
> + regulator-name = "pm8350c_s3";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <704000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /*
> + * ARC regulators:
> + * S4 - mss.lvl
> + * S6 - cx.lvl
> + * S8 - mmcx.lvl
> + */
> +
> + pm8350c_s10: smps10 {
> + regulator-name = "pm8350c_s10";
> + regulator-min-microvolt = <1048000>;
> + regulator-max-microvolt = <1128000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l1: ldo1 {
> + regulator-name = "pm8350c_l1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l2: ldo2 {
> + regulator-name = "pm8350c_l2";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l3: ldo3 {
> + regulator-name = "pm8350c_l3";
> + regulator-min-microvolt = <3304000>;
> + regulator-max-microvolt = <3304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l4: ldo4 {
> + regulator-name = "pm8350c_l4";
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l5: ldo5 {
> + regulator-name = "pm8350c_l5";
> + regulator-min-microvolt = <1704000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l6: ldo6 {
> + regulator-name = "pm8350c_l6";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l7: ldo7 {
> + regulator-name = "pm8350c_l7";
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l8: ldo8 {
> + regulator-name = "pm8350c_l8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l9: ldo9 {
> + regulator-name = "pm8350c_l9";
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l10: ldo10 {
> + regulator-name = "pm8350c_l10";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l11: ldo11 {
> + regulator-name = "pm8350c_l11";
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l12: ldo12 {
> + regulator-name = "pm8350c_l12";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + pm8350c_l13: ldo13 {
> + regulator-name = "pm8350c_l13";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob: bob {
> + regulator-name = "vreg_bob";
> + regulator-min-microvolt = <3400000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
> + };
> + };
> +
> + /* TODO: Add pm8350b (just one ldo) once the driver part is in */
> +
> + regulators-2 {
> + compatible = "qcom,pmr735a-rpmh-regulators";
> + qcom,pmic-id = "e";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> +
> + vdd-l1-l2-supply = <&pmr735a_s2>;
> + vdd-l3-supply = <&pmr735a_s1>;
> + vdd-l4-supply = <&pm8350c_s1>;
> + vdd-l5-l6-supply = <&pm8350c_s1>;
> + vdd-l7-bob-supply = <&vreg_bob>;
> +
> + pmr735a_s1: smps1 {
> + regulator-name = "pmr735a_s1";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1280000>;
> + };
> +
> + pmr735a_s2: smps2 {
> + regulator-name = "pmr735a_s2";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <976000>;
> + };
> +
> + pmr735a_s3: smps3 {
> + regulator-name = "pmr735a_s3";
> + regulator-min-microvolt = <2208000>;
> + regulator-max-microvolt = <2352000>;
> + };
> +
> + pmr735a_l1: ldo1 {
> + regulator-name = "pmr735a_l1";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> + };
> +
> + pmr735a_l2: ldo2 {
> + regulator-name = "pmr735a_l2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + pmr735a_l3: ldo3 {
> + regulator-name = "pmr735a_l3";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + pmr735a_l4: ldo4 {
> + regulator-name = "pmr735a_l4";
> + regulator-min-microvolt = <1776000>;
> + regulator-max-microvolt = <1872000>;
> + };
> +
> + pmr735a_l5: ldo5 {
> + regulator-name = "pmr735a_l5";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <800000>;
> + };
> +
> + pmr735a_l6: ldo6 {
> + regulator-name = "pmr735a_l6";
> + regulator-min-microvolt = <480000>;
> + regulator-max-microvolt = <904000>;
> + };
> +
> + pmr735a_l7: ldo7 {
> + regulator-name = "pmr735a_l7";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> + };
> +};
> +
> &cdsp {
> status = "okay";
> firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: (subset) [PATCH 1/2] arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators
2022-11-14 14:36 [PATCH 1/2] arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators Konrad Dybcio
2022-11-14 14:36 ` [PATCH 2/2] arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3 Konrad Dybcio
2022-11-14 14:38 ` [PATCH 1/2] arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators Konrad Dybcio
@ 2022-11-15 17:46 ` Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Bjorn Andersson @ 2022-11-15 17:46 UTC (permalink / raw)
To: linux-arm-msm, konrad.dybcio, krzysztof.kozlowski, agross
Cc: krzysztof.kozlowski+dt, linux-kernel, konrad.dybcio, patches,
robh+dt, devicetree
On Mon, 14 Nov 2022 15:36:41 +0100, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@somainline.org>
>
> Configure most RPMh-controlled regulators on SoMC Sagami. The missing
> ones (on pm8350b and pm8008[ij]) will be configured when driver support
> is added. Thankfully, it looks like PDX215 and PDX214 don't have any
> differences when it comes to PM8350/PM8350C/PMR735a.
>
> [...]
Applied, thanks!
[1/2] arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators
commit: 5440c005dadc22ee132d59816ca51eb98aa59954
[2/2] arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3
commit: 5a077120bcf6aacf97da75a0f925bfdbe2666815
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-11-15 17:46 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-14 14:36 [PATCH 1/2] arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators Konrad Dybcio
2022-11-14 14:36 ` [PATCH 2/2] arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3 Konrad Dybcio
2022-11-14 14:38 ` [PATCH 1/2] arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators Konrad Dybcio
2022-11-15 17:46 ` (subset) " Bjorn Andersson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.