[PATCH v6 00/35] Allow scsi_execute users to control retries

[PATCH v6 00/35] Allow scsi_execute users to control retries

[Mike Christie]

The following patches, make over Martin's 6.2 scsi-staging branch
(there are some ufs changes in that branch that drop the scsi_execute
use), allow scsi_execute* users to control exactly which errors are
retried, so we can reduce the sense/sshd handling they have to do.

The patches allow scsi_execute* users to pass in an array of failures
which they want retried and also specify how many times they want them
retried. If we hit an error that the user did not specify then we drop
down to the default behavior. This allows us to remove almost all the
retry logic from scsi_execute* users.

v6:
- Fix kunit build when it's built as a module but scsi is not.
- Drop [PATCH 17/35] scsi: ufshcd: Convert to scsi_exec_req because
  that driver no longer uses scsi_execute.
- Convert ufshcd to use the scsi_failures struct because it now just does
  direct retries and does not do it's own deadline timing.
- Add back memset in read_capacity_16.
- Remove memset in get_sectorsize and replace with { } to init buf.

v5:
- Fix spelling (made sure I ran checkpatch strict)
- Drop SCMD_FAILURE_NONE
- Rename SCMD_FAILURE_ANY
- Fix media_not_present handling where it was being retried instead of
failed.
- Fix ILLEGAL_REQUEST handling in read_capacity_16 so it was not retried.
- Fix coding style, spelling and and naming convention in kunit and added
  more tests to handle cases like the media_not_present one where we want
  to force failures instead of retries.
- Drop cxlflash patch because it actually checked it's internal state before
  performing a retry which we currently do not support.

v4:
- Redefine cmd definitions if the cmd is touched.
- Fix up coding style issues.
- Use sam_status enum.
- Move failures initialization to scsi_initialize_rq
(also fixes KASAN error).
- Add kunit test.
- Add function comments.

v3:
- Use a for loop in scsi_check_passthrough
- Fix result handling/testing.
- Fix scsi_status_is_good handling.
- make __scsi_exec_req take a const arg
- Fix formatting in patch 24

v2:
- Rename scsi_prep_sense
- Change scsi_check_passthrough's loop and added some fixes
- Modified scsi_execute* so it uses a struct to pass in args

[PATCH v6 01/35] scsi: Add helper to prep sense during error handling

[Mike Christie]

This breaks out the sense prep so it can be used in helper that will be
added in this patchset for passthrough commands.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/scsi_error.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index be2a70c5ac6d..994b7472fc56 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -517,6 +517,23 @@ static inline void set_scsi_ml_byte(struct scsi_cmnd *cmd, u8 status)
 	cmd->result = (cmd->result & 0xffff00ff) | (status << 8);
 }
 
+static enum scsi_disposition
+scsi_start_sense_processing(struct scsi_cmnd *scmd,
+			    struct scsi_sense_hdr *sshdr)
+{
+	struct scsi_device *sdev = scmd->device;
+
+	if (!scsi_command_normalize_sense(scmd, sshdr))
+		return FAILED;  /* no valid sense data */
+
+	scsi_report_sense(sdev, sshdr);
+
+	if (scsi_sense_is_deferred(sshdr))
+		return NEEDS_RETRY;
+
+	return SUCCESS;
+}
+
 /**
  * scsi_check_sense - Examine scsi cmd sense
  * @scmd:	Cmd to have sense checked.
@@ -532,14 +549,11 @@ enum scsi_disposition scsi_check_sense(struct scsi_cmnd *scmd)
 {
 	struct scsi_device *sdev = scmd->device;
 	struct scsi_sense_hdr sshdr;
+	enum scsi_disposition ret;
 
-	if (! scsi_command_normalize_sense(scmd, &sshdr))
-		return FAILED;	/* no valid sense data */
-
-	scsi_report_sense(sdev, &sshdr);
-
-	if (scsi_sense_is_deferred(&sshdr))
-		return NEEDS_RETRY;
+	ret = scsi_start_sense_processing(scmd, &sshdr);
+	if (ret != SUCCESS)
+		return ret;
 
 	if (sdev->handler && sdev->handler->check_sense) {
 		enum scsi_disposition rc;
-- 
2.25.1

[PATCH v6 02/35] scsi: Allow passthrough to override what errors to retry

[Mike Christie]

For passthrough, we don't retry any error we get a check condition for.
This results in a lot of callers driving their own retries for those types
of errors and retrying all errors, and there has been a request to retry
specific host byte errors.

This adds the core code to allow passthrough users to specify what errors
they want scsi-ml to retry for them. We can then convert users to drop
their sense parsing and retry handling.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
---
 drivers/scsi/scsi_error.c | 82 +++++++++++++++++++++++++++++++++++++++
 drivers/scsi/scsi_lib.c   |  1 +
 include/scsi/scsi_cmnd.h  | 26 ++++++++++++-
 3 files changed, 108 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 994b7472fc56..77d7ad07645a 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1829,6 +1829,82 @@ bool scsi_noretry_cmd(struct scsi_cmnd *scmd)
 	return false;
 }
 
+/**
+ * scsi_check_passthrough - Determine if passthrough scsi_cmnd needs a retry.
+ * @scmd: scsi_cmnd to check.
+ *
+ * Return value:
+ *	SCSI_RETURN_NOT_HANDLED - if the caller should process the command
+ *	because there is no error or the passthrough user wanted the default
+ *	error processing.
+ *	SUCCESS, FAILED or NEEDS_RETRY - if this function has determined the
+ *	command should be completed, go through the error handler due to
+ *	missing sense or should be retried.
+ */
+static enum scsi_disposition scsi_check_passthrough(struct scsi_cmnd *scmd)
+{
+	struct scsi_failure *failure;
+	struct scsi_sense_hdr sshdr;
+	enum scsi_disposition ret;
+	enum sam_status status;
+
+	if (!scmd->result || !scmd->failures)
+		return SCSI_RETURN_NOT_HANDLED;
+
+	for (failure = scmd->failures; failure->result; failure++) {
+		if (failure->result == SCMD_FAILURE_RESULT_ANY)
+			goto maybe_retry;
+
+		if (host_byte(scmd->result) &&
+		    host_byte(scmd->result) == host_byte(failure->result))
+			goto maybe_retry;
+
+		status = get_status_byte(scmd);
+		if (!status)
+			continue;
+
+		if (failure->result == SCMD_FAILURE_STAT_ANY &&
+		    !scsi_status_is_good(scmd->result))
+			goto maybe_retry;
+
+		if (status != __get_status_byte(failure->result))
+			continue;
+
+		if (__get_status_byte(failure->result) !=
+		    SAM_STAT_CHECK_CONDITION ||
+		    failure->sense == SCMD_FAILURE_SENSE_ANY)
+			goto maybe_retry;
+
+		ret = scsi_start_sense_processing(scmd, &sshdr);
+		if (ret == NEEDS_RETRY)
+			goto maybe_retry;
+		else if (ret != SUCCESS)
+			return ret;
+
+		if (failure->sense != sshdr.sense_key)
+			continue;
+
+		if (failure->asc == SCMD_FAILURE_ASC_ANY)
+			goto maybe_retry;
+
+		if (failure->asc != sshdr.asc)
+			continue;
+
+		if (failure->ascq == SCMD_FAILURE_ASCQ_ANY ||
+		    failure->ascq == sshdr.ascq)
+			goto maybe_retry;
+	}
+
+	return SCSI_RETURN_NOT_HANDLED;
+
+maybe_retry:
+	if (failure->allowed == SCMD_FAILURE_NO_LIMIT ||
+	    ++failure->retries <= failure->allowed)
+		return NEEDS_RETRY;
+
+	return SUCCESS;
+}
+
 /**
  * scsi_decide_disposition - Disposition a cmd on return from LLD.
  * @scmd:	SCSI cmd to examine.
@@ -1857,6 +1933,12 @@ enum scsi_disposition scsi_decide_disposition(struct scsi_cmnd *scmd)
 		return SUCCESS;
 	}
 
+	if (blk_rq_is_passthrough(scsi_cmd_to_rq(scmd))) {
+		rtn = scsi_check_passthrough(scmd);
+		if (rtn != SCSI_RETURN_NOT_HANDLED)
+			return rtn;
+	}
+
 	/*
 	 * first check the host byte, to see if there is anything in there
 	 * that would indicate what we need to do.
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ec890865abae..fc1560981a03 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1128,6 +1128,7 @@ static void scsi_initialize_rq(struct request *rq)
 	init_rcu_head(&cmd->rcu);
 	cmd->jiffies_at_alloc = jiffies;
 	cmd->retries = 0;
+	cmd->failures = NULL;
 }
 
 struct request *scsi_alloc_request(struct request_queue *q, blk_opf_t opf,
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index c2cb5f69635c..016a371715b7 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -66,6 +66,23 @@ enum scsi_cmnd_submitter {
 	SUBMITTED_BY_SCSI_RESET_IOCTL = 2,
 } __packed;
 
+#define SCMD_FAILURE_RESULT_ANY	0x7fffffff
+#define SCMD_FAILURE_STAT_ANY	0xff
+#define SCMD_FAILURE_SENSE_ANY	0xff
+#define SCMD_FAILURE_ASC_ANY	0xff
+#define SCMD_FAILURE_ASCQ_ANY	0xff
+#define SCMD_FAILURE_NO_LIMIT	-1
+
+struct scsi_failure {
+	int result;
+	u8 sense;
+	u8 asc;
+	u8 ascq;
+
+	s8 allowed;
+	s8 retries;
+};
+
 struct scsi_cmnd {
 	struct scsi_device *device;
 	struct list_head eh_entry; /* entry for the host eh_abort_list/eh_cmd_q */
@@ -86,6 +103,8 @@ struct scsi_cmnd {
 
 	int retries;
 	int allowed;
+	/* optional array of failures that passthrough users want retried */
+	struct scsi_failure *failures;
 
 	unsigned char prot_op;
 	unsigned char prot_type;
@@ -331,9 +350,14 @@ static inline void set_status_byte(struct scsi_cmnd *cmd, char status)
 	cmd->result = (cmd->result & 0xffffff00) | status;
 }
 
+static inline u8 __get_status_byte(int result)
+{
+	return result & 0xff;
+}
+
 static inline u8 get_status_byte(struct scsi_cmnd *cmd)
 {
-	return cmd->result & 0xff;
+	return __get_status_byte(cmd->result);
 }
 
 static inline void set_host_byte(struct scsi_cmnd *cmd, char status)
-- 
2.25.1

[PATCH v6 03/35] scsi: Add struct for args to execution functions

[Mike Christie]

This begins to move the SCSI execution functions to use a struct for
passing in args. This patch adds the new struct, converts the low level
helpers and then adds a new helper the next patches will convert the rest
of the code to.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_lib.c    | 69 +++++++++++++++-----------------------
 include/scsi/scsi_device.h | 69 ++++++++++++++++++++++++++++++--------
 2 files changed, 82 insertions(+), 56 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index fc1560981a03..f832befb50b0 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -185,55 +185,39 @@ void scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
 	__scsi_queue_insert(cmd, reason, true);
 }
 
-
 /**
- * __scsi_execute - insert request and wait for the result
- * @sdev:	scsi device
- * @cmd:	scsi command
- * @data_direction: data direction
- * @buffer:	data buffer
- * @bufflen:	len of buffer
- * @sense:	optional sense buffer
- * @sshdr:	optional decoded sense header
- * @timeout:	request timeout in HZ
- * @retries:	number of times to retry request
- * @flags:	flags for ->cmd_flags
- * @rq_flags:	flags for ->rq_flags
- * @resid:	optional residual length
+ * __scsi_exec_req - insert request and wait for the result
+ * @scsi_exec_args: See struct definition for description of each field
  *
  * Returns the scsi_cmnd result field if a command was executed, or a negative
  * Linux error code if we didn't get that far.
  */
-int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
-		 int data_direction, void *buffer, unsigned bufflen,
-		 unsigned char *sense, struct scsi_sense_hdr *sshdr,
-		 int timeout, int retries, blk_opf_t flags,
-		 req_flags_t rq_flags, int *resid)
+int __scsi_exec_req(const struct scsi_exec_args *args)
 {
 	struct request *req;
 	struct scsi_cmnd *scmd;
 	int ret;
 
-	req = scsi_alloc_request(sdev->request_queue,
-			data_direction == DMA_TO_DEVICE ?
-			REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
-			rq_flags & RQF_PM ? BLK_MQ_REQ_PM : 0);
+	req = scsi_alloc_request(args->sdev->request_queue,
+				 args->data_dir == DMA_TO_DEVICE ?
+				 REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
+				 args->req_flags & RQF_PM ? BLK_MQ_REQ_PM : 0);
 	if (IS_ERR(req))
 		return PTR_ERR(req);
 
-	if (bufflen) {
-		ret = blk_rq_map_kern(sdev->request_queue, req,
-				      buffer, bufflen, GFP_NOIO);
+	if (args->buf) {
+		ret = blk_rq_map_kern(args->sdev->request_queue, req, args->buf,
+				      args->buf_len, GFP_NOIO);
 		if (ret)
 			goto out;
 	}
 	scmd = blk_mq_rq_to_pdu(req);
-	scmd->cmd_len = COMMAND_SIZE(cmd[0]);
-	memcpy(scmd->cmnd, cmd, scmd->cmd_len);
-	scmd->allowed = retries;
-	req->timeout = timeout;
-	req->cmd_flags |= flags;
-	req->rq_flags |= rq_flags | RQF_QUIET;
+	scmd->cmd_len = COMMAND_SIZE(args->cmd[0]);
+	memcpy(scmd->cmnd, args->cmd, scmd->cmd_len);
+	scmd->allowed = args->retries;
+	req->timeout = args->timeout;
+	req->cmd_flags |= args->op_flags;
+	req->rq_flags |= args->req_flags | RQF_QUIET;
 
 	/*
 	 * head injection *required* here otherwise quiesce won't work
@@ -246,23 +230,24 @@ int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 	 * is invalid.  Prevent the garbage from being misinterpreted
 	 * and prevent security leaks by zeroing out the excess data.
 	 */
-	if (unlikely(scmd->resid_len > 0 && scmd->resid_len <= bufflen))
-		memset(buffer + bufflen - scmd->resid_len, 0, scmd->resid_len);
-
-	if (resid)
-		*resid = scmd->resid_len;
-	if (sense && scmd->sense_len)
-		memcpy(sense, scmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
-	if (sshdr)
+	if (unlikely(scmd->resid_len > 0 && scmd->resid_len <= args->buf_len))
+		memset(args->buf + args->buf_len - scmd->resid_len, 0,
+		       scmd->resid_len);
+
+	if (args->resid)
+		*args->resid = scmd->resid_len;
+	if (args->sense && scmd->sense_len)
+		memcpy(args->sense, scmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
+	if (args->sshdr)
 		scsi_normalize_sense(scmd->sense_buffer, scmd->sense_len,
-				     sshdr);
+				     args->sshdr);
 	ret = scmd->result;
  out:
 	blk_mq_free_request(req);
 
 	return ret;
 }
-EXPORT_SYMBOL(__scsi_execute);
+EXPORT_SYMBOL(__scsi_exec_req);
 
 /*
  * Wake up the error handler if necessary. Avoid as follows that the error
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 24bdbf7999ab..cd3957b80acd 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -454,28 +454,69 @@ extern const char *scsi_device_state_name(enum scsi_device_state);
 extern int scsi_is_sdev_device(const struct device *);
 extern int scsi_is_target_device(const struct device *);
 extern void scsi_sanitize_inquiry_string(unsigned char *s, int len);
-extern int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
-			int data_direction, void *buffer, unsigned bufflen,
-			unsigned char *sense, struct scsi_sense_hdr *sshdr,
-			int timeout, int retries, blk_opf_t flags,
-			req_flags_t rq_flags, int *resid);
+
+struct scsi_exec_args {
+	struct scsi_device *sdev;	/* scsi device */
+	const unsigned char *cmd;	/* scsi command */
+	int data_dir;			/* DMA direction */
+	void *buf;			/* data buffer */
+	unsigned int buf_len;		/* len of buffer */
+	unsigned char *sense;		/* optional sense buffer */
+	unsigned int sense_len;		/* optional sense buffer len */
+	struct scsi_sense_hdr *sshdr;	/* optional decoded sense header */
+	int timeout;			/* request timeout in HZ */
+	int retries;			/* number of times to retry request */
+	blk_opf_t op_flags;		/* flags for ->cmd_flags */
+	req_flags_t req_flags;		/* flags for ->rq_flags */
+	int *resid;			/* optional residual length */
+};
+
+extern int __scsi_exec_req(const struct scsi_exec_args *args);
+/* Make sure any sense buffer is the correct size. */
+#define scsi_exec_req(args)						\
+({									\
+	BUILD_BUG_ON(args.sense &&					\
+		     args.sense_len != SCSI_SENSE_BUFFERSIZE);		\
+	__scsi_exec_req(&args);					\
+})
+
 /* Make sure any sense buffer is the correct size. */
-#define scsi_execute(sdev, cmd, data_direction, buffer, bufflen, sense,	\
-		     sshdr, timeout, retries, flags, rq_flags, resid)	\
+#define scsi_execute(_sdev, _cmd, _data_dir, _buffer, _bufflen, _sense,	\
+		     _sshdr, _timeout, _retries, _flags, _rq_flags,	\
+		     _resid)						\
 ({									\
-	BUILD_BUG_ON((sense) != NULL &&					\
-		     sizeof(sense) != SCSI_SENSE_BUFFERSIZE);		\
-	__scsi_execute(sdev, cmd, data_direction, buffer, bufflen,	\
-		       sense, sshdr, timeout, retries, flags, rq_flags,	\
-		       resid);						\
+	BUILD_BUG_ON((_sense) != NULL &&				\
+		     sizeof(_sense) != SCSI_SENSE_BUFFERSIZE);		\
+	__scsi_exec_req(&((struct scsi_exec_args) {			\
+				.sdev = _sdev,				\
+				.cmd = _cmd,				\
+				.data_dir = _data_dir,			\
+				.buf = _buffer,				\
+				.buf_len = _bufflen,			\
+				.sense = _sense,			\
+				.sshdr = _sshdr,			\
+				.timeout = _timeout,			\
+				.retries = _retries,			\
+				.op_flags = _flags,			\
+				.req_flags = _rq_flags,			\
+				.resid = _resid, }));			\
 })
+
 static inline int scsi_execute_req(struct scsi_device *sdev,
 	const unsigned char *cmd, int data_direction, void *buffer,
 	unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
 	int retries, int *resid)
 {
-	return scsi_execute(sdev, cmd, data_direction, buffer,
-		bufflen, NULL, sshdr, timeout, retries,  0, 0, resid);
+	return __scsi_exec_req(&(struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = cmd,
+					.data_dir = data_direction,
+					.buf = buffer,
+					.buf_len = bufflen,
+					.sshdr = sshdr,
+					.timeout = timeout,
+					.retries = retries,
+					.resid = resid });
 }
 extern void sdev_disable_disk_events(struct scsi_device *sdev);
 extern void sdev_enable_disk_events(struct scsi_device *sdev);
-- 
2.25.1

[PATCH v6 04/35] scsi: Add scsi_failure field to scsi_exec_args

[Mike Christie]

Allow SCSI execution callers to pass in a list of failures they want
retried.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_lib.c    | 1 +
 include/scsi/scsi_device.h | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index f832befb50b0..9b6dc47bcdae 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -215,6 +215,7 @@ int __scsi_exec_req(const struct scsi_exec_args *args)
 	scmd->cmd_len = COMMAND_SIZE(args->cmd[0]);
 	memcpy(scmd->cmnd, args->cmd, scmd->cmd_len);
 	scmd->allowed = args->retries;
+	scmd->failures = args->failures;
 	req->timeout = args->timeout;
 	req->cmd_flags |= args->op_flags;
 	req->rq_flags |= args->req_flags | RQF_QUIET;
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index cd3957b80acd..4ae36274b6c6 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -14,6 +14,7 @@ struct bsg_device;
 struct device;
 struct request_queue;
 struct scsi_cmnd;
+struct scsi_failure;
 struct scsi_lun;
 struct scsi_sense_hdr;
 
@@ -469,6 +470,7 @@ struct scsi_exec_args {
 	blk_opf_t op_flags;		/* flags for ->cmd_flags */
 	req_flags_t req_flags;		/* flags for ->rq_flags */
 	int *resid;			/* optional residual length */
+	struct scsi_failure *failures;	/* optional failures to retry */
 };
 
 extern int __scsi_exec_req(const struct scsi_exec_args *args);
-- 
2.25.1

[PATCH v6 05/35] scsi: libata: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert libata to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/ata/libata-scsi.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e2ebb0b065e2..3057f703982d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -413,9 +413,17 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
 
 	/* Good values for timeout and retries?  Values below
 	   from scsi_ioctl_send_command() for default case... */
-	cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize,
-				  sensebuf, &sshdr, (10*HZ), 5, 0, 0, NULL);
-
+	cmd_result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = scsidev,
+					.cmd = scsi_cmd,
+					.data_dir = data_dir,
+					.buf = argbuf,
+					.buf_len = argsize,
+					.sense = sensebuf,
+					.sense_len = sizeof(sensebuf),
+					.sshdr = &sshdr,
+					.timeout = 10 * HZ,
+					.retries = 5 }));
 	if (cmd_result < 0) {
 		rc = cmd_result;
 		goto error;
@@ -497,9 +505,15 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
 
 	/* Good values for timeout and retries?  Values below
 	   from scsi_ioctl_send_command() for default case... */
-	cmd_result = scsi_execute(scsidev, scsi_cmd, DMA_NONE, NULL, 0,
-				sensebuf, &sshdr, (10*HZ), 5, 0, 0, NULL);
-
+	cmd_result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = scsidev,
+					.cmd = scsi_cmd,
+					.data_dir = DMA_NONE,
+					.sense = sensebuf,
+					.sense_len = sizeof(sensebuf),
+					.sshdr = &sshdr,
+					.timeout = 10 * HZ,
+					.retries = 5 }));
 	if (cmd_result < 0) {
 		rc = cmd_result;
 		goto error;
-- 
2.25.1

[PATCH v6 06/35] hwmon: drivetemp: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
---
 drivers/hwmon/drivetemp.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/drivetemp.c b/drivers/hwmon/drivetemp.c
index 5bac2b0fc7bb..ec208cac9c7f 100644
--- a/drivers/hwmon/drivetemp.c
+++ b/drivers/hwmon/drivetemp.c
@@ -192,9 +192,14 @@ static int drivetemp_scsi_command(struct drivetemp_data *st,
 	scsi_cmd[12] = lba_high;
 	scsi_cmd[14] = ata_command;
 
-	return scsi_execute_req(st->sdev, scsi_cmd, data_dir,
-				st->smartdata, ATA_SECT_SIZE, NULL, HZ, 5,
-				NULL);
+	return scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = st->sdev,
+					.cmd = scsi_cmd,
+					.data_dir = data_dir,
+					.buf = st->smartdata,
+					.buf_len = ATA_SECT_SIZE,
+					.timeout = HZ,
+					.retries = 5 }));
 }
 
 static int drivetemp_ata_command(struct drivetemp_data *st, u8 feature,
-- 
2.25.1

[PATCH v6 07/35] scsi: ch: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ch.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index 7ab29eaec6f3..511df7a64a74 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -195,9 +195,15 @@ ch_do_scsi(scsi_changer *ch, unsigned char *cmd, int cmd_len,
 
  retry:
 	errno = 0;
-	result = scsi_execute_req(ch->device, cmd, direction, buffer,
-				  buflength, &sshdr, timeout * HZ,
-				  MAX_RETRIES, NULL);
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = ch->device,
+					.cmd = cmd,
+					.data_dir = direction,
+					.buf = buffer,
+					.buf_len = buflength,
+					.sshdr = &sshdr,
+					.timeout = timeout * HZ,
+					.retries = MAX_RETRIES }));
 	if (result < 0)
 		return result;
 	if (scsi_sense_valid(&sshdr)) {
-- 
2.25.1

[PATCH v6 08/35] scsi: scsi_dh: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/device_handler/scsi_dh_alua.c  | 26 ++++++++++++++++-----
 drivers/scsi/device_handler/scsi_dh_emc.c   | 13 ++++++++---
 drivers/scsi/device_handler/scsi_dh_hp_sw.c | 20 ++++++++++++----
 drivers/scsi/device_handler/scsi_dh_rdac.c  | 15 +++++++++---
 4 files changed, 58 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 610a51538f03..e4825da21d05 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -139,9 +139,16 @@ static int submit_rtpg(struct scsi_device *sdev, unsigned char *buff,
 		cdb[1] = MI_REPORT_TARGET_PGS;
 	put_unaligned_be32(bufflen, &cdb[6]);
 
-	return scsi_execute(sdev, cdb, DMA_FROM_DEVICE, buff, bufflen, NULL,
-			sshdr, ALUA_FAILOVER_TIMEOUT * HZ,
-			ALUA_FAILOVER_RETRIES, req_flags, 0, NULL);
+	return scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdev,
+				.cmd = cdb,
+				.data_dir = DMA_FROM_DEVICE,
+				.buf = buff,
+				.buf_len = bufflen,
+				.sshdr = sshdr,
+				.timeout = ALUA_FAILOVER_TIMEOUT * HZ,
+				.retries = ALUA_FAILOVER_RETRIES,
+				.op_flags = req_flags }));
 }
 
 /*
@@ -171,9 +178,16 @@ static int submit_stpg(struct scsi_device *sdev, int group_id,
 	cdb[1] = MO_SET_TARGET_PGS;
 	put_unaligned_be32(stpg_len, &cdb[6]);
 
-	return scsi_execute(sdev, cdb, DMA_TO_DEVICE, stpg_data, stpg_len, NULL,
-			sshdr, ALUA_FAILOVER_TIMEOUT * HZ,
-			ALUA_FAILOVER_RETRIES, req_flags, 0, NULL);
+	return scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdev,
+				.cmd = cdb,
+				.data_dir = DMA_TO_DEVICE,
+				.buf = stpg_data,
+				.buf_len = stpg_len,
+				.sshdr = sshdr,
+				.timeout = ALUA_FAILOVER_TIMEOUT * HZ,
+				.retries = ALUA_FAILOVER_RETRIES,
+				.op_flags = req_flags }));
 }
 
 static struct alua_port_group *alua_find_get_pg(char *id_str, size_t id_size,
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index 2e21ab447873..0ad6163dc426 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -263,9 +263,16 @@ static int send_trespass_cmd(struct scsi_device *sdev,
 	BUG_ON((len > CLARIION_BUFFER_SIZE));
 	memcpy(csdev->buffer, page22, len);
 
-	err = scsi_execute(sdev, cdb, DMA_TO_DEVICE, csdev->buffer, len, NULL,
-			&sshdr, CLARIION_TIMEOUT * HZ, CLARIION_RETRIES,
-			req_flags, 0, NULL);
+	err = scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdev,
+				.cmd = cdb,
+				.data_dir = DMA_TO_DEVICE,
+				.buf = csdev->buffer,
+				.buf_len = len,
+				.sshdr = &sshdr,
+				.timeout = CLARIION_TIMEOUT * HZ,
+				.retries = CLARIION_RETRIES,
+				.op_flags = req_flags }));
 	if (err) {
 		if (scsi_sense_valid(&sshdr))
 			res = trespass_endio(sdev, &sshdr);
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 0d2cfa60aa06..adcbe3b883b7 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -87,8 +87,14 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
 		REQ_FAILFAST_DRIVER;
 
 retry:
-	res = scsi_execute(sdev, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
-			HP_SW_TIMEOUT, HP_SW_RETRIES, req_flags, 0, NULL);
+	res = scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdev,
+				.cmd = cmd,
+				.data_dir = DMA_NONE,
+				.sshdr = &sshdr,
+				.timeout = HP_SW_TIMEOUT,
+				.retries = HP_SW_RETRIES,
+				.op_flags = req_flags }));
 	if (res) {
 		if (scsi_sense_valid(&sshdr))
 			ret = tur_done(sdev, h, &sshdr);
@@ -125,8 +131,14 @@ static int hp_sw_start_stop(struct hp_sw_dh_data *h)
 		REQ_FAILFAST_DRIVER;
 
 retry:
-	res = scsi_execute(sdev, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
-			HP_SW_TIMEOUT, HP_SW_RETRIES, req_flags, 0, NULL);
+	res = scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdev,
+				.cmd = cmd,
+				.data_dir = DMA_NONE,
+				.sshdr = &sshdr,
+				.timeout = HP_SW_TIMEOUT,
+				.retries = HP_SW_RETRIES,
+				.op_flags = req_flags }));
 	if (res) {
 		if (!scsi_sense_valid(&sshdr)) {
 			sdev_printk(KERN_WARNING, sdev,
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index bf8754741f85..c4d1830512ca 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -538,6 +538,7 @@ static void send_mode_select(struct work_struct *work)
 	unsigned int data_size;
 	blk_opf_t req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
 		REQ_FAILFAST_DRIVER;
+	int result;
 
 	spin_lock(&ctlr->ms_lock);
 	list_splice_init(&ctlr->ms_head, &list);
@@ -555,9 +556,17 @@ static void send_mode_select(struct work_struct *work)
 		(char *) h->ctlr->array_name, h->ctlr->index,
 		(retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying");
 
-	if (scsi_execute(sdev, cdb, DMA_TO_DEVICE, &h->ctlr->mode_select,
-			data_size, NULL, &sshdr, RDAC_TIMEOUT * HZ,
-			RDAC_RETRIES, req_flags, 0, NULL)) {
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = cdb,
+					.data_dir = DMA_TO_DEVICE,
+					.buf = &h->ctlr->mode_select,
+					.buf_len = data_size,
+					.sshdr = &sshdr,
+					.timeout = RDAC_TIMEOUT * HZ,
+					.retries = RDAC_RETRIES,
+					.op_flags = req_flags }));
+	if (result) {
 		err = mode_select_handle_sense(sdev, &sshdr);
 		if (err == SCSI_DH_RETRY && retry_cnt--)
 			goto retry;
-- 
2.25.1

[PATCH v6 09/35] scsi: core: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi.c       | 21 +++++++++++++++++----
 drivers/scsi/scsi_ioctl.c |  9 +++++++--
 drivers/scsi/scsi_lib.c   | 31 +++++++++++++++++++++++++------
 drivers/scsi/scsi_scan.c  | 37 ++++++++++++++++++++++++++++---------
 4 files changed, 77 insertions(+), 21 deletions(-)

diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 1426b9b03612..e074e572d478 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -309,8 +309,14 @@ static int scsi_vpd_inquiry(struct scsi_device *sdev, unsigned char *buffer,
 	 * I'm not convinced we need to try quite this hard to get VPD, but
 	 * all the existing users tried this hard.
 	 */
-	result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer,
-				  len, NULL, 30 * HZ, 3, NULL);
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = buffer,
+					.buf_len = len,
+					.timeout = 30 * HZ,
+					.retries = 3 }));
 	if (result)
 		return -EIO;
 
@@ -531,8 +537,15 @@ int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
 	put_unaligned_be32(request_len, &cmd[6]);
 	memset(buffer, 0, len);
 
-	result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer,
-				  request_len, &sshdr, 30 * HZ, 3, NULL);
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = buffer,
+					.buf_len = request_len,
+					.sshdr = &sshdr,
+					.timeout = 30 * HZ,
+					.retries = 3 }));
 
 	if (result < 0)
 		return result;
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index 2d20da55fb64..67f291cb0042 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -73,8 +73,13 @@ static int ioctl_internal_command(struct scsi_device *sdev, char *cmd,
 	SCSI_LOG_IOCTL(1, sdev_printk(KERN_INFO, sdev,
 				      "Trying ioctl with scsi command %d\n", *cmd));
 
-	result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0,
-				  &sshdr, timeout, retries, NULL);
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = cmd,
+					.data_dir = DMA_NONE,
+					.sshdr = &sshdr,
+					.timeout = timeout,
+					.retries = retries }));
 
 	SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev,
 				      "Ioctl returned  0x%x\n", result));
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 9b6dc47bcdae..8b2a9388420c 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2123,8 +2123,15 @@ int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
 		cmd[4] = len;
 	}
 
-	ret = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, real_buffer, len,
-			       sshdr, timeout, retries, NULL);
+	ret = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = cmd,
+					.data_dir = DMA_TO_DEVICE,
+					.buf = real_buffer,
+					.buf_len = len,
+					.sshdr = sshdr,
+					.timeout = timeout,
+					.retries = retries }));
 	kfree(real_buffer);
 	return ret;
 }
@@ -2188,8 +2195,15 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
 
 	memset(buffer, 0, len);
 
-	result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
-				  sshdr, timeout, retries, NULL);
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = buffer,
+					.buf_len = len,
+					.sshdr = sshdr,
+					.timeout = timeout,
+					.retries = retries }));
 	if (result < 0)
 		return result;
 
@@ -2273,8 +2287,13 @@ scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries,
 
 	/* try to eat the UNIT_ATTENTION if there are enough retries */
 	do {
-		result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr,
-					  timeout, 1, NULL);
+		result = scsi_exec_req(((struct scsi_exec_args) {
+						.sdev = sdev,
+						.cmd = cmd,
+						.data_dir = DMA_NONE,
+						.sshdr = sshdr,
+						.timeout = timeout,
+						.retries = 1 }));
 		if (sdev->removable && scsi_sense_valid(sshdr) &&
 		    sshdr->sense_key == UNIT_ATTENTION)
 			sdev->changed = 1;
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 5d27f5196de6..58edd5d641f8 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -210,8 +210,14 @@ static void scsi_unlock_floptical(struct scsi_device *sdev,
 	scsi_cmd[3] = 0;
 	scsi_cmd[4] = 0x2a;     /* size */
 	scsi_cmd[5] = 0;
-	scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, result, 0x2a, NULL,
-			 SCSI_TIMEOUT, 3, NULL);
+	scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdev,
+				.cmd = scsi_cmd,
+				.data_dir = DMA_FROM_DEVICE,
+				.buf = result,
+				.buf_len = 0x2a,
+				.timeout = SCSI_TIMEOUT,
+				.retries = 3 }));
 }
 
 static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev,
@@ -674,10 +680,17 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 
 		memset(inq_result, 0, try_inquiry_len);
 
-		result = scsi_execute_req(sdev,  scsi_cmd, DMA_FROM_DEVICE,
-					  inq_result, try_inquiry_len, &sshdr,
-					  HZ / 2 + HZ * scsi_inq_timeout, 3,
-					  &resid);
+		result = scsi_exec_req(((struct scsi_exec_args) {
+						.sdev = sdev,
+						.cmd = scsi_cmd,
+						.data_dir = DMA_FROM_DEVICE,
+						.buf = inq_result,
+						.buf_len = try_inquiry_len,
+						.sshdr = &sshdr,
+						.timeout = HZ / 2 +
+							HZ * scsi_inq_timeout,
+						.retries = 3,
+						.resid = &resid }));
 
 		SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
 				"scsi scan: INQUIRY %s with code 0x%x\n",
@@ -1477,9 +1490,15 @@ static int scsi_report_lun_scan(struct scsi_target *starget, blist_flags_t bflag
 				"scsi scan: Sending REPORT LUNS to (try %d)\n",
 				retries));
 
-		result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
-					  lun_data, length, &sshdr,
-					  SCSI_REPORT_LUNS_TIMEOUT, 3, NULL);
+		result = scsi_exec_req(((struct scsi_exec_args) {
+						.sdev = sdev,
+						.cmd = scsi_cmd,
+						.data_dir = DMA_FROM_DEVICE,
+						.buf = lun_data,
+						.buf_len = length,
+						.sshdr = &sshdr,
+						.timeout = SCSI_REPORT_LUNS_TIMEOUT,
+						.retries = 3 }));
 
 		SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
 				"scsi scan: REPORT LUNS"
-- 
2.25.1

[PATCH v6 10/35] scsi: spi: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_transport_spi.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index f569cf0095c2..18a365c577ed 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -121,12 +121,21 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd,
 		 * The purpose of the RQF_PM flag below is to bypass the
 		 * SDEV_QUIESCE state.
 		 */
-		result = scsi_execute(sdev, cmd, dir, buffer, bufflen, sense,
-				      sshdr, DV_TIMEOUT, /* retries */ 1,
-				      REQ_FAILFAST_DEV |
-				      REQ_FAILFAST_TRANSPORT |
-				      REQ_FAILFAST_DRIVER,
-				      RQF_PM, NULL);
+		result = scsi_exec_req(((struct scsi_exec_args) {
+						.sdev = sdev,
+						.cmd = cmd,
+						.data_dir = dir,
+						.buf = buffer,
+						.buf_len = bufflen,
+						.sense = sense,
+						.sense_len = sizeof(sense),
+						.sshdr = sshdr,
+						.timeout = DV_TIMEOUT,
+						.retries = 1,
+						.op_flags = REQ_FAILFAST_DEV |
+							REQ_FAILFAST_TRANSPORT |
+							REQ_FAILFAST_DRIVER,
+						.req_flags = RQF_PM }));
 		if (result < 0 || !scsi_sense_valid(sshdr) ||
 		    sshdr->sense_key != UNIT_ATTENTION)
 			break;
-- 
2.25.1

[PATCH v6 11/35] scsi: sd: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/sd.c | 102 ++++++++++++++++++++++++++++++++++------------
 1 file changed, 76 insertions(+), 26 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index eb76ba055021..37eafa968116 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -671,9 +671,16 @@ static int sd_sec_submit(void *data, u16 spsp, u8 secp, void *buffer,
 	put_unaligned_be16(spsp, &cdb[2]);
 	put_unaligned_be32(len, &cdb[6]);
 
-	ret = scsi_execute(sdev, cdb, send ? DMA_TO_DEVICE : DMA_FROM_DEVICE,
-		buffer, len, NULL, NULL, SD_TIMEOUT, sdkp->max_retries, 0,
-		RQF_PM, NULL);
+	ret = scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdev,
+				.cmd = cdb,
+				.data_dir = send ?
+					DMA_TO_DEVICE : DMA_FROM_DEVICE,
+				.buf = buffer,
+				.buf_len = len,
+				.timeout = SD_TIMEOUT,
+				.retries = sdkp->max_retries,
+				.req_flags = RQF_PM }));
 	return ret <= 0 ? ret : -EIO;
 }
 #endif /* CONFIG_BLK_SED_OPAL */
@@ -1594,8 +1601,14 @@ static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
 		 * Leave the rest of the command zero to indicate
 		 * flush everything.
 		 */
-		res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, sshdr,
-				timeout, sdkp->max_retries, 0, RQF_PM, NULL);
+		res = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdp,
+					.cmd = cmd,
+					.data_dir = DMA_NONE,
+					.sshdr = sshdr,
+					.timeout = timeout,
+					.retries = sdkp->max_retries,
+					.req_flags = RQF_PM }));
 		if (res == 0)
 			break;
 	}
@@ -1720,8 +1733,15 @@ static int sd_pr_command(struct block_device *bdev, u8 sa,
 	put_unaligned_be64(sa_key, &data[8]);
 	data[20] = flags;
 
-	result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, &data, sizeof(data),
-			&sshdr, SD_TIMEOUT, sdkp->max_retries, NULL);
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = cmd,
+					.data_dir = DMA_TO_DEVICE,
+					.buf = &data,
+					.buf_len = sizeof(data),
+					.sshdr = &sshdr,
+					.timeout = SD_TIMEOUT,
+					.retries = sdkp->max_retries }));
 
 	if (scsi_status_is_check_condition(result) &&
 	    scsi_sense_valid(&sshdr)) {
@@ -2062,10 +2082,13 @@ sd_spinup_disk(struct scsi_disk *sdkp)
 			cmd[0] = TEST_UNIT_READY;
 			memset((void *) &cmd[1], 0, 9);
 
-			the_result = scsi_execute_req(sdkp->device, cmd,
-						      DMA_NONE, NULL, 0,
-						      &sshdr, SD_TIMEOUT,
-						      sdkp->max_retries, NULL);
+			the_result = scsi_exec_req(((struct scsi_exec_args) {
+							.sdev = sdkp->device,
+							.cmd = cmd,
+							.data_dir = DMA_NONE,
+							.sshdr = &sshdr,
+							.timeout = SD_TIMEOUT,
+							.retries = sdkp->max_retries }));
 
 			/*
 			 * If the drive has indicated to us that it
@@ -2122,10 +2145,13 @@ sd_spinup_disk(struct scsi_disk *sdkp)
 				cmd[4] = 1;	/* Start spin cycle */
 				if (sdkp->device->start_stop_pwr_cond)
 					cmd[4] |= 1 << 4;
-				scsi_execute_req(sdkp->device, cmd, DMA_NONE,
-						 NULL, 0, &sshdr,
-						 SD_TIMEOUT, sdkp->max_retries,
-						 NULL);
+				scsi_exec_req(((struct scsi_exec_args) {
+						.sdev = sdkp->device,
+						.cmd = cmd,
+						.data_dir = DMA_NONE,
+						.sshdr = &sshdr,
+						.timeout = SD_TIMEOUT,
+						.retries = sdkp->max_retries }));
 				spintime_expire = jiffies + 100 * HZ;
 				spintime = 1;
 			}
@@ -2272,9 +2298,15 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
 		cmd[13] = RC16_LEN;
 		memset(buffer, 0, RC16_LEN);
 
-		the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
-					buffer, RC16_LEN, &sshdr,
-					SD_TIMEOUT, sdkp->max_retries, NULL);
+		the_result = scsi_exec_req(((struct scsi_exec_args) {
+						.sdev = sdp,
+						.cmd = cmd,
+						.data_dir = DMA_FROM_DEVICE,
+						.buf = buffer,
+						.buf_len = RC16_LEN,
+						.sshdr = &sshdr,
+						.timeout = SD_TIMEOUT,
+						.retries = sdkp->max_retries }));
 
 		if (media_not_present(sdkp, &sshdr))
 			return -ENODEV;
@@ -2357,9 +2389,15 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
 		memset(&cmd[1], 0, 9);
 		memset(buffer, 0, 8);
 
-		the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
-					buffer, 8, &sshdr,
-					SD_TIMEOUT, sdkp->max_retries, NULL);
+		the_result = scsi_exec_req(((struct scsi_exec_args) {
+						.sdev = sdp,
+						.cmd = cmd,
+						.data_dir = DMA_FROM_DEVICE,
+						.buf = buffer,
+						.buf_len = 8,
+						.sshdr = &sshdr,
+						.timeout = SD_TIMEOUT,
+						.retries = sdkp->max_retries }));
 
 		if (media_not_present(sdkp, &sshdr))
 			return -ENODEV;
@@ -3608,8 +3646,14 @@ static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
 	if (!scsi_device_online(sdp))
 		return -ENODEV;
 
-	res = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
-			SD_TIMEOUT, sdkp->max_retries, 0, RQF_PM, NULL);
+	res = scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdp,
+				.cmd = cmd,
+				.data_dir = DMA_NONE,
+				.sshdr = &sshdr,
+				.timeout = SD_TIMEOUT,
+				.retries = sdkp->max_retries,
+				.req_flags = RQF_PM }));
 	if (res) {
 		sd_print_result(sdkp, "Start/Stop Unit failed", res);
 		if (res > 0 && scsi_sense_valid(&sshdr)) {
@@ -3740,6 +3784,7 @@ static int sd_resume_runtime(struct device *dev)
 {
 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
 	struct scsi_device *sdp;
+	int result;
 
 	if (!sdkp)	/* E.g.: runtime resume at the start of sd_probe() */
 		return 0;
@@ -3750,9 +3795,14 @@ static int sd_resume_runtime(struct device *dev)
 		/* clear the device's sense data */
 		static const u8 cmd[10] = { REQUEST_SENSE };
 
-		if (scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL,
-				 NULL, sdp->request_queue->rq_timeout, 1, 0,
-				 RQF_PM, NULL))
+		result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdp,
+					.cmd = cmd,
+					.data_dir = DMA_NONE,
+					.timeout = sdp->request_queue->rq_timeout,
+					.retries = 1,
+					.req_flags = RQF_PM }));
+		if (result)
 			sd_printk(KERN_NOTICE, sdkp,
 				  "Failed to clear sense data\n");
 	}
-- 
2.25.1

[PATCH v6 12/35] scsi: zbc: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/sd_zbc.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index bd15624c6322..d87884a19a51 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -157,9 +157,15 @@ static int sd_zbc_do_report_zones(struct scsi_disk *sdkp, unsigned char *buf,
 	if (partial)
 		cmd[14] = ZBC_REPORT_ZONE_PARTIAL;
 
-	result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
-				  buf, buflen, &sshdr,
-				  timeout, SD_MAX_RETRIES, NULL);
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdp,
+					.cmd = cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = buf,
+					.buf_len = buflen,
+					.sshdr = &sshdr,
+					.timeout = timeout,
+					.retries = SD_MAX_RETRIES }));
 	if (result) {
 		sd_printk(KERN_ERR, sdkp,
 			  "REPORT ZONES start lba %llu failed\n", lba);
-- 
2.25.1

[PATCH v6 13/35] scsi: ses: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ses.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 0a1734f34587..c90722aa552c 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -91,8 +91,15 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 	struct scsi_sense_hdr sshdr;
 
 	do {
-		ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
-				       &sshdr, SES_TIMEOUT, 1, NULL);
+		ret = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = buf,
+					.buf_len = bufflen,
+					.sshdr = &sshdr,
+					.timeout = SES_TIMEOUT,
+					.retries = 1 }));
 	} while (ret > 0 && --retries && scsi_sense_valid(&sshdr) &&
 		 (sshdr.sense_key == NOT_READY ||
 		  (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
@@ -132,8 +139,15 @@ static int ses_send_diag(struct scsi_device *sdev, int page_code,
 	unsigned int retries = SES_RETRIES;
 
 	do {
-		result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen,
-					  &sshdr, SES_TIMEOUT, 1, NULL);
+		result = scsi_exec_req(((struct scsi_exec_args) {
+						.sdev = sdev,
+						.cmd = cmd,
+						.data_dir = DMA_TO_DEVICE,
+						.buf = buf,
+						.buf_len = bufflen,
+						.sshdr = &sshdr,
+						.timeout = SES_TIMEOUT,
+						.retries = 1 }));
 	} while (result > 0 && --retries && scsi_sense_valid(&sshdr) &&
 		 (sshdr.sense_key == NOT_READY ||
 		  (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
-- 
2.25.1

[PATCH v6 14/35] scsi: sr: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/sr.c       | 22 +++++++++++++++++-----
 drivers/scsi/sr_ioctl.c | 13 +++++++++----
 2 files changed, 26 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index a278b739d0c5..e3171f040fe1 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -172,8 +172,15 @@ static unsigned int sr_get_events(struct scsi_device *sdev)
 	struct scsi_sense_hdr sshdr;
 	int result;
 
-	result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, sizeof(buf),
-				  &sshdr, SR_TIMEOUT, MAX_RETRIES, NULL);
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = buf,
+					.buf_len = sizeof(buf),
+					.sshdr = &sshdr,
+					.timeout = SR_TIMEOUT,
+					.retries = MAX_RETRIES }));
 	if (scsi_sense_valid(&sshdr) && sshdr.sense_key == UNIT_ATTENTION)
 		return DISK_EVENT_MEDIA_CHANGE;
 
@@ -730,9 +737,14 @@ static void get_sectorsize(struct scsi_cd *cd)
 		memset(buffer, 0, sizeof(buffer));
 
 		/* Do the command and wait.. */
-		the_result = scsi_execute_req(cd->device, cmd, DMA_FROM_DEVICE,
-					      buffer, sizeof(buffer), NULL,
-					      SR_TIMEOUT, MAX_RETRIES, NULL);
+		the_result = scsi_exec_req(((struct scsi_exec_args) {
+						.sdev = cd->device,
+						.cmd = cmd,
+						.data_dir = DMA_FROM_DEVICE,
+						.buf = buffer,
+						.buf_len = sizeof(buffer),
+						.timeout = SR_TIMEOUT,
+						.retries = MAX_RETRIES }));
 
 		retries--;
 
diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c
index fbdb5124d7f7..3d852117d16b 100644
--- a/drivers/scsi/sr_ioctl.c
+++ b/drivers/scsi/sr_ioctl.c
@@ -202,10 +202,15 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc)
 		goto out;
 	}
 
-	result = scsi_execute(SDev, cgc->cmd, cgc->data_direction,
-			      cgc->buffer, cgc->buflen, NULL, sshdr,
-			      cgc->timeout, IOCTL_RETRIES, 0, 0, NULL);
-
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = SDev,
+					.cmd = cgc->cmd,
+					.data_dir = cgc->data_direction,
+					.buf = cgc->buffer,
+					.buf_len = cgc->buflen,
+					.sshdr = sshdr,
+					.timeout = cgc->timeout,
+					.retries = IOCTL_RETRIES }));
 	/* Minimal error checking.  Ignore cases we know about, and report the rest. */
 	if (result < 0) {
 		err = result;
-- 
2.25.1

[PATCH v6 15/35] scsi: virtio_scsi: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/virtio_scsi.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index d07d24c06b54..e5d26b4eff8c 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -347,9 +347,14 @@ static void virtscsi_rescan_hotunplug(struct virtio_scsi *vscsi)
 
 		memset(inq_result, 0, inq_result_len);
 
-		result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
-					  inq_result, inquiry_len, NULL,
-					  SD_TIMEOUT, SD_MAX_RETRIES, NULL);
+		result = scsi_exec_req(((struct scsi_exec_args) {
+						.sdev = sdev,
+						.cmd = scsi_cmd,
+						.data_dir = DMA_FROM_DEVICE,
+						.buf = inq_result,
+						.buf_len = inquiry_len,
+						.timeout = SD_TIMEOUT,
+						.retries = SD_MAX_RETRIES }));
 
 		if (result == 0 && inq_result[0] >> 5) {
 			/* PQ indicates the LUN is not attached */
-- 
2.25.1

[PATCH v6 16/35] scsi: target_core_pscsi: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/target/target_core_pscsi.c | 31 +++++++++++++++++++++++-------
 1 file changed, 24 insertions(+), 7 deletions(-)

diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index 69a4c9581e80..f2f4ff0b53e1 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -144,8 +144,14 @@ static void pscsi_tape_read_blocksize(struct se_device *dev,
 	cdb[0] = MODE_SENSE;
 	cdb[4] = 0x0c; /* 12 bytes */
 
-	ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf, 12, NULL,
-			HZ, 1, NULL);
+	ret = scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdev,
+				.cmd = cdb,
+				.data_dir = DMA_FROM_DEVICE,
+				.buf = buf,
+				.buf_len = 12,
+				.timeout = HZ,
+				.retries = 1 }));
 	if (ret)
 		goto out_free;
 
@@ -195,8 +201,14 @@ pscsi_get_inquiry_vpd_serial(struct scsi_device *sdev, struct t10_wwn *wwn)
 	cdb[2] = 0x80; /* Unit Serial Number */
 	put_unaligned_be16(INQUIRY_VPD_SERIAL_LEN, &cdb[3]);
 
-	ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf,
-			      INQUIRY_VPD_SERIAL_LEN, NULL, HZ, 1, NULL);
+	ret = scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdev,
+				.cmd = cdb,
+				.data_dir = DMA_FROM_DEVICE,
+				.buf = buf,
+				.buf_len = INQUIRY_VPD_SERIAL_LEN,
+				.timeout = HZ,
+				.retries = 1 }));
 	if (ret)
 		goto out_free;
 
@@ -230,9 +242,14 @@ pscsi_get_inquiry_vpd_device_ident(struct scsi_device *sdev,
 	cdb[2] = 0x83; /* Device Identifier */
 	put_unaligned_be16(INQUIRY_VPD_DEVICE_IDENTIFIER_LEN, &cdb[3]);
 
-	ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf,
-			      INQUIRY_VPD_DEVICE_IDENTIFIER_LEN,
-			      NULL, HZ, 1, NULL);
+	ret = scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdev,
+				.cmd = cdb,
+				.data_dir = DMA_FROM_DEVICE,
+				.buf = buf,
+				.buf_len = INQUIRY_VPD_DEVICE_IDENTIFIER_LEN,
+				.timeout = HZ,
+				.retries = 1 }));
 	if (ret)
 		goto out;
 
-- 
2.25.1

[PATCH v6 17/35] scsi: cxlflash: Convert to scsi_exec_req

[Mike Christie]

scsi_execute* is going to be removed. Convert to scsi_exec_req so
we pass all args in a scsi_exec_args struct.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/cxlflash/superpipe.c | 18 ++++++++++++------
 drivers/scsi/cxlflash/vlun.c      | 11 ++++++++---
 2 files changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/cxlflash/superpipe.c b/drivers/scsi/cxlflash/superpipe.c
index df0ebabbf387..724e52f0b58c 100644
--- a/drivers/scsi/cxlflash/superpipe.c
+++ b/drivers/scsi/cxlflash/superpipe.c
@@ -308,16 +308,16 @@ static int afu_attach(struct cxlflash_cfg *cfg, struct ctx_info *ctxi)
  * @lli:	LUN destined for capacity request.
  *
  * The READ_CAP16 can take quite a while to complete. Should an EEH occur while
- * in scsi_execute(), the EEH handler will attempt to recover. As part of the
+ * in scsi_exec_req(), the EEH handler will attempt to recover. As part of the
  * recovery, the handler drains all currently running ioctls, waiting until they
  * have completed before proceeding with a reset. As this routine is used on the
  * ioctl path, this can create a condition where the EEH handler becomes stuck,
  * infinitely waiting for this ioctl thread. To avoid this behavior, temporarily
  * unmark this thread as an ioctl thread by releasing the ioctl read semaphore.
  * This will allow the EEH handler to proceed with a recovery while this thread
- * is still running. Once the scsi_execute() returns, reacquire the ioctl read
+ * is still running. Once the scsi_exec_req() returns, reacquire the ioctl read
  * semaphore and check the adapter state in case it changed while inside of
- * scsi_execute(). The state check will wait if the adapter is still being
+ * scsi_exec_req(). The state check will wait if the adapter is still being
  * recovered or return a failure if the recovery failed. In the event that the
  * adapter reset failed, simply return the failure as the ioctl would be unable
  * to continue.
@@ -357,9 +357,15 @@ static int read_cap16(struct scsi_device *sdev, struct llun_info *lli)
 
 	/* Drop the ioctl read semahpore across lengthy call */
 	up_read(&cfg->ioctl_rwsem);
-	result = scsi_execute(sdev, scsi_cmd, DMA_FROM_DEVICE, cmd_buf,
-			      CMD_BUFSIZE, NULL, &sshdr, to, CMD_RETRIES,
-			      0, 0, NULL);
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = scsi_cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = cmd_buf,
+					.buf_len = CMD_BUFSIZE,
+					.sshdr = &sshdr,
+					.timeout = to,
+					.retries = CMD_RETRIES }));
 	down_read(&cfg->ioctl_rwsem);
 	rc = check_state(cfg);
 	if (rc) {
diff --git a/drivers/scsi/cxlflash/vlun.c b/drivers/scsi/cxlflash/vlun.c
index 5c74dc7c2288..4fb5d91c08ba 100644
--- a/drivers/scsi/cxlflash/vlun.c
+++ b/drivers/scsi/cxlflash/vlun.c
@@ -450,9 +450,14 @@ static int write_same16(struct scsi_device *sdev,
 
 		/* Drop the ioctl read semahpore across lengthy call */
 		up_read(&cfg->ioctl_rwsem);
-		result = scsi_execute(sdev, scsi_cmd, DMA_TO_DEVICE, cmd_buf,
-				      CMD_BUFSIZE, NULL, NULL, to,
-				      CMD_RETRIES, 0, 0, NULL);
+		result = scsi_exec_req(((struct scsi_exec_args) {
+						.sdev = sdev,
+						.cmd = scsi_cmd,
+						.data_dir = DMA_TO_DEVICE,
+						.buf = cmd_buf,
+						.buf_len = CMD_BUFSIZE,
+						.timeout = to,
+						.retries = CMD_RETRIES }));
 		down_read(&cfg->ioctl_rwsem);
 		rc = check_state(cfg);
 		if (rc) {
-- 
2.25.1

[PATCH v6 18/35] scsi: Remove scsi_execute functions

[Mike Christie]

The scsi_execute* functions are no longer used so remove them.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 include/scsi/scsi_device.h | 39 --------------------------------------
 1 file changed, 39 deletions(-)

diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 4ae36274b6c6..76a7a05baaa4 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -481,45 +481,6 @@ extern int __scsi_exec_req(const struct scsi_exec_args *args);
 		     args.sense_len != SCSI_SENSE_BUFFERSIZE);		\
 	__scsi_exec_req(&args);					\
 })
-
-/* Make sure any sense buffer is the correct size. */
-#define scsi_execute(_sdev, _cmd, _data_dir, _buffer, _bufflen, _sense,	\
-		     _sshdr, _timeout, _retries, _flags, _rq_flags,	\
-		     _resid)						\
-({									\
-	BUILD_BUG_ON((_sense) != NULL &&				\
-		     sizeof(_sense) != SCSI_SENSE_BUFFERSIZE);		\
-	__scsi_exec_req(&((struct scsi_exec_args) {			\
-				.sdev = _sdev,				\
-				.cmd = _cmd,				\
-				.data_dir = _data_dir,			\
-				.buf = _buffer,				\
-				.buf_len = _bufflen,			\
-				.sense = _sense,			\
-				.sshdr = _sshdr,			\
-				.timeout = _timeout,			\
-				.retries = _retries,			\
-				.op_flags = _flags,			\
-				.req_flags = _rq_flags,			\
-				.resid = _resid, }));			\
-})
-
-static inline int scsi_execute_req(struct scsi_device *sdev,
-	const unsigned char *cmd, int data_direction, void *buffer,
-	unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
-	int retries, int *resid)
-{
-	return __scsi_exec_req(&(struct scsi_exec_args) {
-					.sdev = sdev,
-					.cmd = cmd,
-					.data_dir = data_direction,
-					.buf = buffer,
-					.buf_len = bufflen,
-					.sshdr = sshdr,
-					.timeout = timeout,
-					.retries = retries,
-					.resid = resid });
-}
 extern void sdev_disable_disk_events(struct scsi_device *sdev);
 extern void sdev_enable_disk_events(struct scsi_device *sdev);
 extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t);
-- 
2.25.1

[PATCH v6 19/35] scsi: Have scsi-ml retry scsi_probe_lun errors

[Mike Christie]

This has scsi_probe_lun ask scsi-ml to retry UAs instead of driving them
itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_scan.c | 51 ++++++++++++++++++++++++----------------
 1 file changed, 31 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 58edd5d641f8..ffdb043bda5f 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -653,8 +653,29 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 	unsigned char scsi_cmd[MAX_COMMAND_SIZE];
 	int first_inquiry_len, try_inquiry_len, next_inquiry_len;
 	int response_len = 0;
-	int pass, count, result;
-	struct scsi_sense_hdr sshdr;
+	int pass, count, result, i;
+	/*
+	 * not-ready to ready transition [asc/ascq=0x28/0x0] or power-on,
+	 * reset [asc/ascq=0x29/0x0], continue. INQUIRY should not yield
+	 * UNIT_ATTENTION but many buggy devices do so anyway.
+	 */
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x28,
+			.ascq = 0,
+			.allowed = 3,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x29,
+			.ascq = 0,
+			.allowed = 3,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 
 	*bflags = 0;
 
@@ -671,6 +692,11 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 				pass, try_inquiry_len));
 
 	/* Each pass gets up to three chances to ignore Unit Attention */
+	for (i = 0; i < ARRAY_SIZE(failures); i++) {
+		if (failures[i].sense == UNIT_ATTENTION)
+			failures[i].retries = 0;
+	}
+
 	for (count = 0; count < 3; ++count) {
 		int resid;
 
@@ -686,32 +712,17 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 						.data_dir = DMA_FROM_DEVICE,
 						.buf = inq_result,
 						.buf_len = try_inquiry_len,
-						.sshdr = &sshdr,
 						.timeout = HZ / 2 +
 							HZ * scsi_inq_timeout,
 						.retries = 3,
-						.resid = &resid }));
+						.resid = &resid,
+						.failures = failures }));
 
 		SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
 				"scsi scan: INQUIRY %s with code 0x%x\n",
 				result ? "failed" : "successful", result));
 
-		if (result > 0) {
-			/*
-			 * not-ready to ready transition [asc/ascq=0x28/0x0]
-			 * or power-on, reset [asc/ascq=0x29/0x0], continue.
-			 * INQUIRY should not yield UNIT_ATTENTION
-			 * but many buggy devices do so anyway. 
-			 */
-			if (scsi_status_is_check_condition(result) &&
-			    scsi_sense_valid(&sshdr)) {
-				if ((sshdr.sense_key == UNIT_ATTENTION) &&
-				    ((sshdr.asc == 0x28) ||
-				     (sshdr.asc == 0x29)) &&
-				    (sshdr.ascq == 0))
-					continue;
-			}
-		} else if (result == 0) {
+		if (result == 0) {
 			/*
 			 * if nothing was transferred, we try
 			 * again. It's a workaround for some USB
-- 
2.25.1

[PATCH v6 20/35] scsi: retry INQUIRY after timeout

[Mike Christie]

Description from: Martin Wilck <mwilck@suse.com>:

The SCSI mid layer doesn't retry commands after DID_TIME_OUT (see
scsi_noretry_cmd()). Packet loss in the fabric can cause spurious timeouts
during SCSI device probing, causing device probing to fail. This has been
observed in FCoE uplink failover tests, for example.

This patch fixes the issue by retrying the INQUIRY up to 3 times (in
practice, we never observed more than a single retry),

Signed-off-by: Mike Christie <michael.christie@oracle.com>
---
 drivers/scsi/scsi_scan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index ffdb043bda5f..28d53efc192b 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -674,6 +674,10 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 			.allowed = 3,
 			.result = SAM_STAT_CHECK_CONDITION,
 		},
+		{
+			.allowed = 1,
+			.result = DID_TIME_OUT << 16,
+		},
 		{},
 	};
 
-- 
2.25.1

[PATCH v6 21/35] scsi: Have scsi-ml retry read_capacity_16 errors

[Mike Christie]

This has read_capacity_16 have scsi-ml retry errors instead of driving
them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/sd.c | 115 ++++++++++++++++++++++++++++++----------------
 1 file changed, 75 insertions(+), 40 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 37eafa968116..54e599529a3c 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2279,59 +2279,94 @@ static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
 static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
 						unsigned char *buffer)
 {
-	unsigned char cmd[16];
+	static const u8 cmd[16] = { SERVICE_ACTION_IN_16, SAI_READ_CAPACITY_16,
+				    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, RC16_LEN };
 	struct scsi_sense_hdr sshdr;
 	int sense_valid = 0;
 	int the_result;
-	int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
 	unsigned int alignment;
 	unsigned long long lba;
 	unsigned sector_size;
+	struct scsi_failure failures[] = {
+		/*
+		 * Fail immediately for Invalid Command Operation Code or
+		 * Invalid Field in CDB.
+		 */
+		{
+			.sense = ILLEGAL_REQUEST,
+			.asc = 0x20,
+			.ascq = 0x0,
+			.allowed = 0,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = ILLEGAL_REQUEST,
+			.asc = 0x24,
+			.ascq = 0x0,
+			.allowed = 0,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		/* Fail immediately for Medium Not Present */
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x3A,
+			.ascq = 0x0,
+			.allowed = 0,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = NOT_READY,
+			.asc = 0x3A,
+			.ascq = 0x0,
+			.allowed = 0,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x29,
+			.ascq = 0,
+			/* Device reset might occur several times */
+			.allowed = READ_CAPACITY_RETRIES_ON_RESET,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		/* Any other error not listed above retry */
+		{
+			.result = SCMD_FAILURE_RESULT_ANY,
+			.allowed = 3,
+		},
+		{},
+	};
 
 	if (sdp->no_read_capacity_16)
 		return -EINVAL;
 
-	do {
-		memset(cmd, 0, 16);
-		cmd[0] = SERVICE_ACTION_IN_16;
-		cmd[1] = SAI_READ_CAPACITY_16;
-		cmd[13] = RC16_LEN;
-		memset(buffer, 0, RC16_LEN);
-
-		the_result = scsi_exec_req(((struct scsi_exec_args) {
-						.sdev = sdp,
-						.cmd = cmd,
-						.data_dir = DMA_FROM_DEVICE,
-						.buf = buffer,
-						.buf_len = RC16_LEN,
-						.sshdr = &sshdr,
-						.timeout = SD_TIMEOUT,
-						.retries = sdkp->max_retries }));
+	memset(buffer, 0, RC16_LEN);
 
-		if (media_not_present(sdkp, &sshdr))
-			return -ENODEV;
+	the_result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdp,
+					.cmd = cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = buffer,
+					.buf_len = RC16_LEN,
+					.sshdr = &sshdr,
+					.timeout = SD_TIMEOUT,
+					.retries = sdkp->max_retries,
+					.failures = failures }));
 
-		if (the_result > 0) {
-			sense_valid = scsi_sense_valid(&sshdr);
-			if (sense_valid &&
-			    sshdr.sense_key == ILLEGAL_REQUEST &&
-			    (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
-			    sshdr.ascq == 0x00)
-				/* Invalid Command Operation Code or
-				 * Invalid Field in CDB, just retry
-				 * silently with RC10 */
-				return -EINVAL;
-			if (sense_valid &&
-			    sshdr.sense_key == UNIT_ATTENTION &&
-			    sshdr.asc == 0x29 && sshdr.ascq == 0x00)
-				/* Device reset might occur several times,
-				 * give it one more chance */
-				if (--reset_retries > 0)
-					continue;
-		}
-		retries--;
+	if (media_not_present(sdkp, &sshdr))
+		return -ENODEV;
 
-	} while (the_result && retries);
+	if (the_result > 0) {
+		sense_valid = scsi_sense_valid(&sshdr);
+		if (sense_valid && sshdr.sense_key == ILLEGAL_REQUEST &&
+		    (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
+		     sshdr.ascq == 0x00)
+			/*
+			 * Invalid Command Operation Code or Invalid Field in
+			 * CDB, just retry silently with RC10
+			 */
+			return -EINVAL;
+	}
 
 	if (the_result) {
 		sd_print_result(sdkp, "Read Capacity(16) failed", the_result);
-- 
2.25.1

[PATCH v6 22/35] scsi: Have scsi-ml retry sd_spinup_disk errors

[Mike Christie]

This simplifies sd_spinup_disk so scsi-ml retries errors for it. Note that
we retried specifically on a UA and also if scsi_status_is_good returned
failed which would happen for all check conditions. In this patch we use
SCMD_FAILURE_STAT_ANY which will trigger for the same conditions as
when scsi_status_is_good returns false. This will cover all CCs including
UAs so there is no explicit failures arrary entry for UAs.

We do not handle the outside loop's retries because we want to sleep
between tried and we don't support that yet.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
---
 drivers/scsi/sd.c | 93 +++++++++++++++++++++++++++--------------------
 1 file changed, 53 insertions(+), 40 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 54e599529a3c..66f1bc03e219 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2062,52 +2062,66 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 static void
 sd_spinup_disk(struct scsi_disk *sdkp)
 {
-	unsigned char cmd[10];
+	static const u8 cmd[10] = { TEST_UNIT_READY };
 	unsigned long spintime_expire = 0;
-	int retries, spintime;
+	int spintime;
 	unsigned int the_result;
 	struct scsi_sense_hdr sshdr;
-	int sense_valid = 0;
+	int sense_valid = 0, i;
+	struct scsi_failure failures[] = {
+		/* Fail immediately for Medium Not Present */
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x3A,
+			.ascq = 0x0,
+			.allowed = 0,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = NOT_READY,
+			.asc = 0x3A,
+			.ascq = 0x0,
+			.allowed = 0,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.result = SCMD_FAILURE_STAT_ANY,
+			.allowed = 3,
+		},
+		{},
+	};
 
 	spintime = 0;
 
 	/* Spin up drives, as required.  Only do this at boot time */
 	/* Spinup needs to be done for module loads too. */
 	do {
-		retries = 0;
-
-		do {
-			bool media_was_present = sdkp->media_present;
+		bool media_was_present = sdkp->media_present;
 
-			cmd[0] = TEST_UNIT_READY;
-			memset((void *) &cmd[1], 0, 9);
+		for (i = 0; i < ARRAY_SIZE(failures); i++)
+			failures[i].retries = 0;
 
-			the_result = scsi_exec_req(((struct scsi_exec_args) {
-							.sdev = sdkp->device,
-							.cmd = cmd,
-							.data_dir = DMA_NONE,
-							.sshdr = &sshdr,
-							.timeout = SD_TIMEOUT,
-							.retries = sdkp->max_retries }));
+		the_result = scsi_exec_req(((struct scsi_exec_args) {
+						.sdev = sdkp->device,
+						.cmd = cmd,
+						.data_dir = DMA_NONE,
+						.sshdr = &sshdr,
+						.timeout = SD_TIMEOUT,
+						.retries = sdkp->max_retries,
+						.failures = failures }));
 
-			/*
-			 * If the drive has indicated to us that it
-			 * doesn't have any media in it, don't bother
-			 * with any more polling.
-			 */
-			if (media_not_present(sdkp, &sshdr)) {
-				if (media_was_present)
-					sd_printk(KERN_NOTICE, sdkp, "Media removed, stopped polling\n");
-				return;
-			}
+		/*
+		 * If the drive has indicated to us that it doesn't have any
+		 * media in it, don't bother  with any more polling.
+		 */
+		if (media_not_present(sdkp, &sshdr)) {
+			if (media_was_present)
+				sd_printk(KERN_NOTICE, sdkp, "Media removed, stopped polling\n");
+			return;
+		}
 
-			if (the_result)
-				sense_valid = scsi_sense_valid(&sshdr);
-			retries++;
-		} while (retries < 3 &&
-			 (!scsi_status_is_good(the_result) ||
-			  (scsi_status_is_check_condition(the_result) &&
-			  sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
+		if (the_result)
+			sense_valid = scsi_sense_valid(&sshdr);
 
 		if (!scsi_status_is_check_condition(the_result)) {
 			/* no sense, TUR either succeeded or failed
@@ -2138,16 +2152,15 @@ sd_spinup_disk(struct scsi_disk *sdkp)
 			 * Issue command to spin up drive when not ready
 			 */
 			if (!spintime) {
+				/* Return immediately and start spin cycle */
+				const u8 start_cmd[10] = { START_STOP, 1, 0, 0,
+					sdkp->device->start_stop_pwr_cond ?
+					0x11 : 1 };
+
 				sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
-				cmd[0] = START_STOP;
-				cmd[1] = 1;	/* Return immediately */
-				memset((void *) &cmd[2], 0, 8);
-				cmd[4] = 1;	/* Start spin cycle */
-				if (sdkp->device->start_stop_pwr_cond)
-					cmd[4] |= 1 << 4;
 				scsi_exec_req(((struct scsi_exec_args) {
 						.sdev = sdkp->device,
-						.cmd = cmd,
+						.cmd = start_cmd,
 						.data_dir = DMA_NONE,
 						.sshdr = &sshdr,
 						.timeout = SD_TIMEOUT,
-- 
2.25.1

[PATCH v6 23/35] scsi: hp_sw: Have scsi-ml retry scsi_exec_req errors

[Mike Christie]

This has hp_sw have scsi-ml retry scsi_exec_req errors instead of driving
them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/device_handler/scsi_dh_hp_sw.c | 46 +++++++++++++--------
 1 file changed, 29 insertions(+), 17 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index adcbe3b883b7..8c09d512a415 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -46,9 +46,6 @@ static int tur_done(struct scsi_device *sdev, struct hp_sw_dh_data *h,
 	int ret = SCSI_DH_IO;
 
 	switch (sshdr->sense_key) {
-	case UNIT_ATTENTION:
-		ret = SCSI_DH_IMM_RETRY;
-		break;
 	case NOT_READY:
 		if (sshdr->asc == 0x04 && sshdr->ascq == 2) {
 			/*
@@ -85,8 +82,17 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
 	int ret = SCSI_DH_OK, res;
 	blk_opf_t req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
 		REQ_FAILFAST_DRIVER;
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = SCMD_FAILURE_NO_LIMIT,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 
-retry:
 	res = scsi_exec_req(((struct scsi_exec_args) {
 				.sdev = sdev,
 				.cmd = cmd,
@@ -94,7 +100,8 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
 				.sshdr = &sshdr,
 				.timeout = HP_SW_TIMEOUT,
 				.retries = HP_SW_RETRIES,
-				.op_flags = req_flags }));
+				.op_flags = req_flags,
+				.failures = failures }));
 	if (res) {
 		if (scsi_sense_valid(&sshdr))
 			ret = tur_done(sdev, h, &sshdr);
@@ -108,8 +115,6 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
 		h->path_state = HP_SW_PATH_ACTIVE;
 		ret = SCSI_DH_OK;
 	}
-	if (ret == SCSI_DH_IMM_RETRY)
-		goto retry;
 
 	return ret;
 }
@@ -126,11 +131,24 @@ static int hp_sw_start_stop(struct hp_sw_dh_data *h)
 	struct scsi_sense_hdr sshdr;
 	struct scsi_device *sdev = h->sdev;
 	int res, rc = SCSI_DH_OK;
-	int retry_cnt = HP_SW_RETRIES;
 	blk_opf_t req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
 		REQ_FAILFAST_DRIVER;
+	struct scsi_failure failures[] = {
+		{
+			/*
+			 * LUN not ready - manual intervention required
+			 *
+			 * Switch-over in progress, retry.
+			 */
+			.sense = NOT_READY,
+			.asc = 0x04,
+			.ascq = 0x03,
+			.allowed = HP_SW_RETRIES,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 
-retry:
 	res = scsi_exec_req(((struct scsi_exec_args) {
 				.sdev = sdev,
 				.cmd = cmd,
@@ -138,7 +156,8 @@ static int hp_sw_start_stop(struct hp_sw_dh_data *h)
 				.sshdr = &sshdr,
 				.timeout = HP_SW_TIMEOUT,
 				.retries = HP_SW_RETRIES,
-				.op_flags = req_flags }));
+				.op_flags = req_flags,
+				.failures = failures }));
 	if (res) {
 		if (!scsi_sense_valid(&sshdr)) {
 			sdev_printk(KERN_WARNING, sdev,
@@ -149,13 +168,6 @@ static int hp_sw_start_stop(struct hp_sw_dh_data *h)
 		switch (sshdr.sense_key) {
 		case NOT_READY:
 			if (sshdr.asc == 0x04 && sshdr.ascq == 3) {
-				/*
-				 * LUN not ready - manual intervention required
-				 *
-				 * Switch-over in progress, retry.
-				 */
-				if (--retry_cnt)
-					goto retry;
 				rc = SCSI_DH_RETRY;
 				break;
 			}
-- 
2.25.1

[PATCH v6 24/35] scsi: rdac: Have scsi-ml retry send_mode_select errors

[Mike Christie]

This has rdac have scsi-ml retry errors instead of driving them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/device_handler/scsi_dh_rdac.c | 109 ++++++++++++---------
 1 file changed, 60 insertions(+), 49 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index c4d1830512ca..953fad6ddd66 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -485,43 +485,17 @@ static int set_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h)
 static int mode_select_handle_sense(struct scsi_device *sdev,
 				    struct scsi_sense_hdr *sense_hdr)
 {
-	int err = SCSI_DH_IO;
 	struct rdac_dh_data *h = sdev->handler_data;
 
 	if (!scsi_sense_valid(sense_hdr))
-		goto done;
-
-	switch (sense_hdr->sense_key) {
-	case NO_SENSE:
-	case ABORTED_COMMAND:
-	case UNIT_ATTENTION:
-		err = SCSI_DH_RETRY;
-		break;
-	case NOT_READY:
-		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01)
-			/* LUN Not Ready and is in the Process of Becoming
-			 * Ready
-			 */
-			err = SCSI_DH_RETRY;
-		break;
-	case ILLEGAL_REQUEST:
-		if (sense_hdr->asc == 0x91 && sense_hdr->ascq == 0x36)
-			/*
-			 * Command Lock contention
-			 */
-			err = SCSI_DH_IMM_RETRY;
-		break;
-	default:
-		break;
-	}
+		return SCSI_DH_IO;
 
 	RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
 		"MODE_SELECT returned with sense %02x/%02x/%02x",
 		(char *) h->ctlr->array_name, h->ctlr->index,
 		sense_hdr->sense_key, sense_hdr->asc, sense_hdr->ascq);
 
-done:
-	return err;
+	return SCSI_DH_IO;
 }
 
 static void send_mode_select(struct work_struct *work)
@@ -530,7 +504,7 @@ static void send_mode_select(struct work_struct *work)
 		container_of(work, struct rdac_controller, ms_work);
 	struct scsi_device *sdev = ctlr->ms_sdev;
 	struct rdac_dh_data *h = sdev->handler_data;
-	int err = SCSI_DH_OK, retry_cnt = RDAC_RETRY_COUNT;
+	int err = SCSI_DH_OK, result;
 	struct rdac_queue_data *tmp, *qdata;
 	LIST_HEAD(list);
 	unsigned char cdb[MAX_COMMAND_SIZE];
@@ -538,7 +512,49 @@ static void send_mode_select(struct work_struct *work)
 	unsigned int data_size;
 	blk_opf_t req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
 		REQ_FAILFAST_DRIVER;
-	int result;
+	struct scsi_failure failures[] = {
+		{
+			.sense = NO_SENSE,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = RDAC_RETRY_COUNT,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = ABORTED_COMMAND,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = RDAC_RETRY_COUNT,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = RDAC_RETRY_COUNT,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			/*
+			 * LUN Not Ready and is in the Process of Becoming
+			 * Ready
+			 */
+			.sense = NOT_READY,
+			.asc = 0x04,
+			.ascq = 0x01,
+			.allowed = RDAC_RETRY_COUNT,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			/* Command Lock contention */
+			.sense = ILLEGAL_REQUEST,
+			.asc = 0x91,
+			.ascq = 0x36,
+			.allowed = SCMD_FAILURE_NO_LIMIT,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 
 	spin_lock(&ctlr->ms_lock);
 	list_splice_init(&ctlr->ms_head, &list);
@@ -546,33 +562,28 @@ static void send_mode_select(struct work_struct *work)
 	ctlr->ms_sdev = NULL;
 	spin_unlock(&ctlr->ms_lock);
 
- retry:
 	memset(cdb, 0, sizeof(cdb));
 
 	data_size = rdac_failover_get(ctlr, &list, cdb);
 
 	RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
-		"%s MODE_SELECT command",
-		(char *) h->ctlr->array_name, h->ctlr->index,
-		(retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying");
+		"MODE_SELECT command",
+		(char *) h->ctlr->array_name, h->ctlr->index);
 
 	result = scsi_exec_req(((struct scsi_exec_args) {
-					.sdev = sdev,
-					.cmd = cdb,
-					.data_dir = DMA_TO_DEVICE,
-					.buf = &h->ctlr->mode_select,
-					.buf_len = data_size,
-					.sshdr = &sshdr,
-					.timeout = RDAC_TIMEOUT * HZ,
-					.retries = RDAC_RETRIES,
-					.op_flags = req_flags }));
-	if (result) {
+				.sdev = sdev,
+				.cmd = cdb,
+				.data_dir = DMA_TO_DEVICE,
+				.buf = &h->ctlr->mode_select,
+				.buf_len = data_size,
+				.sshdr = &sshdr,
+				.timeout = RDAC_TIMEOUT * HZ,
+				.retries = RDAC_RETRIES,
+				.op_flags = req_flags,
+				.failures = failures }));
+	if (result)
 		err = mode_select_handle_sense(sdev, &sshdr);
-		if (err == SCSI_DH_RETRY && retry_cnt--)
-			goto retry;
-		if (err == SCSI_DH_IMM_RETRY)
-			goto retry;
-	}
+
 	if (err == SCSI_DH_OK) {
 		h->state = RDAC_STATE_ACTIVE;
 		RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
-- 
2.25.1

[PATCH v6 25/35] scsi: spi: Have scsi-ml retry spi_execute errors

[Mike Christie]

This has spi_execute have scsi-ml retry errors instead of driving them.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/scsi_transport_spi.c | 56 +++++++++++++++++--------------
 1 file changed, 30 insertions(+), 26 deletions(-)

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 18a365c577ed..b172dd0205cc 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -109,38 +109,42 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd,
 		       void *buffer, unsigned bufflen,
 		       struct scsi_sense_hdr *sshdr)
 {
-	int i, result;
 	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
 	struct scsi_sense_hdr sshdr_tmp;
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = DV_RETRIES,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 
 	if (!sshdr)
 		sshdr = &sshdr_tmp;
 
-	for(i = 0; i < DV_RETRIES; i++) {
-		/*
-		 * The purpose of the RQF_PM flag below is to bypass the
-		 * SDEV_QUIESCE state.
-		 */
-		result = scsi_exec_req(((struct scsi_exec_args) {
-						.sdev = sdev,
-						.cmd = cmd,
-						.data_dir = dir,
-						.buf = buffer,
-						.buf_len = bufflen,
-						.sense = sense,
-						.sense_len = sizeof(sense),
-						.sshdr = sshdr,
-						.timeout = DV_TIMEOUT,
-						.retries = 1,
-						.op_flags = REQ_FAILFAST_DEV |
-							REQ_FAILFAST_TRANSPORT |
-							REQ_FAILFAST_DRIVER,
-						.req_flags = RQF_PM }));
-		if (result < 0 || !scsi_sense_valid(sshdr) ||
-		    sshdr->sense_key != UNIT_ATTENTION)
-			break;
-	}
-	return result;
+	/*
+	 * The purpose of the RQF_PM flag below is to bypass the
+	 * SDEV_QUIESCE state.
+	 */
+	return scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdev,
+				.cmd = cmd,
+				.data_dir = dir,
+				.buf = buffer,
+				.buf_len = bufflen,
+				.sense = sense,
+				.sense_len = sizeof(sense),
+				.sshdr = sshdr,
+				.timeout = DV_TIMEOUT,
+				.retries = 1,
+				.op_flags = REQ_FAILFAST_DEV |
+						REQ_FAILFAST_TRANSPORT |
+						REQ_FAILFAST_DRIVER,
+				.req_flags = RQF_PM,
+				.failures = failures }));
 }
 
 static struct {
-- 
2.25.1

[PATCH v6 26/35] scsi: sd: Have scsi-ml retry sd_sync_cache errors

[Mike Christie]

This has sd_sync_cache have scsi-ml retry errors instead of driving them
itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/sd.c | 42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 66f1bc03e219..a07f569b5812 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1580,11 +1580,19 @@ static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
 
 static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
 {
-	int retries, res;
 	struct scsi_device *sdp = sdkp->device;
 	const int timeout = sdp->request_queue->rq_timeout
 		* SD_FLUSH_TIMEOUT_MULTIPLIER;
 	struct scsi_sense_hdr my_sshdr;
+	struct scsi_failure failures[] = {
+		{
+			.allowed = 3,
+			.result = SCMD_FAILURE_RESULT_ANY,
+		},
+		{},
+	};
+	static const u8 cmd[10] = { SYNCHRONIZE_CACHE };
+	int res;
 
 	if (!scsi_device_online(sdp))
 		return -ENODEV;
@@ -1593,26 +1601,18 @@ static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
 	if (!sshdr)
 		sshdr = &my_sshdr;
 
-	for (retries = 3; retries > 0; --retries) {
-		unsigned char cmd[10] = { 0 };
-
-		cmd[0] = SYNCHRONIZE_CACHE;
-		/*
-		 * Leave the rest of the command zero to indicate
-		 * flush everything.
-		 */
-		res = scsi_exec_req(((struct scsi_exec_args) {
-					.sdev = sdp,
-					.cmd = cmd,
-					.data_dir = DMA_NONE,
-					.sshdr = sshdr,
-					.timeout = timeout,
-					.retries = sdkp->max_retries,
-					.req_flags = RQF_PM }));
-		if (res == 0)
-			break;
-	}
-
+	/*
+	 * Leave the rest of the command zero to indicate flush everything.
+	 */
+	res = scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdp,
+				.cmd = cmd,
+				.data_dir = DMA_NONE,
+				.sshdr = sshdr,
+				.timeout = timeout,
+				.retries = sdkp->max_retries,
+				.req_flags = RQF_PM,
+				.failures = failures }));
 	if (res) {
 		sd_print_result(sdkp, "Synchronize Cache(10) failed", res);
 
-- 
2.25.1

[PATCH v6 27/35] scsi: ch: Have scsi-ml retry ch_do_scsi errors

[Mike Christie]

This has ch_do_scsi have scsi-ml retry errors instead of driving them
itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/ch.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index 511df7a64a74..015cdc0ab575 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -113,7 +113,6 @@ typedef struct {
 	struct scsi_device  **dt;        /* ptrs to data transfer elements */
 	u_int               firsts[CH_TYPES];
 	u_int               counts[CH_TYPES];
-	u_int               unit_attention;
 	u_int		    voltags;
 	struct mutex	    lock;
 } scsi_changer;
@@ -187,13 +186,22 @@ ch_do_scsi(scsi_changer *ch, unsigned char *cmd, int cmd_len,
 	   void *buffer, unsigned buflength,
 	   enum dma_data_direction direction)
 {
-	int errno, retries = 0, timeout, result;
+	int errno, timeout, result;
 	struct scsi_sense_hdr sshdr;
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = 3,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 
 	timeout = (cmd[0] == INITIALIZE_ELEMENT_STATUS)
 		? timeout_init : timeout_move;
 
- retry:
 	errno = 0;
 	result = scsi_exec_req(((struct scsi_exec_args) {
 					.sdev = ch->device,
@@ -203,21 +211,14 @@ ch_do_scsi(scsi_changer *ch, unsigned char *cmd, int cmd_len,
 					.buf_len = buflength,
 					.sshdr = &sshdr,
 					.timeout = timeout * HZ,
-					.retries = MAX_RETRIES }));
+					.retries = MAX_RETRIES,
+					.failures = failures }));
 	if (result < 0)
 		return result;
 	if (scsi_sense_valid(&sshdr)) {
 		if (debug)
 			scsi_print_sense_hdr(ch->device, ch->name, &sshdr);
 		errno = ch_find_errno(&sshdr);
-
-		switch(sshdr.sense_key) {
-		case UNIT_ATTENTION:
-			ch->unit_attention = 1;
-			if (retries++ < 3)
-				goto retry;
-			break;
-		}
 	}
 	return errno;
 }
-- 
2.25.1

[PATCH v6 28/35] scsi: Have scsi-ml retry scsi_mode_sense errors

[Mike Christie]

This has scsi_mode_sense have scsi-ml retry errors instead of driving them
itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/scsi_lib.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 8b2a9388420c..623e53fe9a84 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2160,8 +2160,18 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
 	unsigned char cmd[12];
 	int use_10_for_ms;
 	int header_length;
-	int result, retry_count = retries;
+	int result;
 	struct scsi_sense_hdr my_sshdr;
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = retries,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 
 	memset(data, 0, sizeof(*data));
 	memset(&cmd[0], 0, 12);
@@ -2203,7 +2213,8 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
 					.buf_len = len,
 					.sshdr = sshdr,
 					.timeout = timeout,
-					.retries = retries }));
+					.retries = retries,
+					.failures = failures }));
 	if (result < 0)
 		return result;
 
@@ -2230,12 +2241,6 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
 					goto retry;
 				}
 			}
-			if (scsi_status_is_check_condition(result) &&
-			    sshdr->sense_key == UNIT_ATTENTION &&
-			    retry_count) {
-				retry_count--;
-				goto retry;
-			}
 		}
 		return -EIO;
 	}
-- 
2.25.1

[PATCH v6 29/35] scsi: Have scsi-ml retry scsi_report_lun_scan errors

[Mike Christie]

This has scsi_report_lun_scan have scsi-ml retry errors instead of driving
them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/scsi_scan.c | 68 +++++++++++++++++++++++-----------------
 1 file changed, 39 insertions(+), 29 deletions(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 28d53efc192b..1da0d2687c6e 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1425,13 +1425,32 @@ static int scsi_report_lun_scan(struct scsi_target *starget, blist_flags_t bflag
 	unsigned int length;
 	u64 lun;
 	unsigned int num_luns;
-	unsigned int retries;
 	int result;
 	struct scsi_lun *lunp, *lun_data;
-	struct scsi_sense_hdr sshdr;
 	struct scsi_device *sdev;
 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
-	int ret = 0;
+	int ret = 0, i;
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = 3,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		/* Fail all CCs except the UA above */
+		{
+			.sense = SCMD_FAILURE_SENSE_ANY,
+			.allowed = 0,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		/* Retry any oher errors not listed above */
+		{
+			.result = SCMD_FAILURE_RESULT_ANY,
+			.allowed = 3,
+		},
+		{},
+	};
 
 	/*
 	 * Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set.
@@ -1500,34 +1519,25 @@ static int scsi_report_lun_scan(struct scsi_target *starget, blist_flags_t bflag
 	 * should come through as a check condition, and will not generate
 	 * a retry.
 	 */
-	for (retries = 0; retries < 3; retries++) {
-		SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
-				"scsi scan: Sending REPORT LUNS to (try %d)\n",
-				retries));
+	for (i = 0; i < ARRAY_SIZE(failures); i++)
+		failures[i].retries = 0;
 
-		result = scsi_exec_req(((struct scsi_exec_args) {
-						.sdev = sdev,
-						.cmd = scsi_cmd,
-						.data_dir = DMA_FROM_DEVICE,
-						.buf = lun_data,
-						.buf_len = length,
-						.sshdr = &sshdr,
-						.timeout = SCSI_REPORT_LUNS_TIMEOUT,
-						.retries = 3 }));
-
-		SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
-				"scsi scan: REPORT LUNS"
-				" %s (try %d) result 0x%x\n",
-				result ?  "failed" : "successful",
-				retries, result));
-		if (result == 0)
-			break;
-		else if (scsi_sense_valid(&sshdr)) {
-			if (sshdr.sense_key != UNIT_ATTENTION)
-				break;
-		}
-	}
+	SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
+			  "scsi scan: Sending REPORT LUNS\n"));
+
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = scsi_cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = lun_data,
+					.buf_len = length,
+					.timeout = SCSI_REPORT_LUNS_TIMEOUT,
+					.retries = 3,
+					.failures = failures }));
 
+	SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
+			  "scsi scan: REPORT LUNS %s result 0x%x\n",
+			  result ?  "failed" : "successful", result));
 	if (result) {
 		/*
 		 * The device probably does not support a REPORT LUN command
-- 
2.25.1

[PATCH v6 30/35] scsi: sd: Have sd_pr_command retry UAs

[Mike Christie]

It's common to get a UA when doing PR commands. It could be due to a
target restarting, transport level relogin or other PR commands like a
release causing it. The upper layers don't get the sense and in some cases
have no idea if it's a SCSI device, so this has the sd layer retry.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/sd.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index a07f569b5812..0545fadde8c5 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1723,6 +1723,16 @@ static int sd_pr_command(struct block_device *bdev, u8 sa,
 	int result;
 	u8 cmd[16] = { 0, };
 	u8 data[24] = { 0, };
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = 5,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 
 	cmd[0] = PERSISTENT_RESERVE_OUT;
 	cmd[1] = sa;
@@ -1741,7 +1751,8 @@ static int sd_pr_command(struct block_device *bdev, u8 sa,
 					.buf_len = sizeof(data),
 					.sshdr = &sshdr,
 					.timeout = SD_TIMEOUT,
-					.retries = sdkp->max_retries }));
+					.retries = sdkp->max_retries,
+					.failures = failures }));
 
 	if (scsi_status_is_check_condition(result) &&
 	    scsi_sense_valid(&sshdr)) {
-- 
2.25.1

[PATCH v6 31/35] scsi: sd: Have scsi-ml retry read_capacity_10 errors

[Mike Christie]

This has read_capacity_10 have scsi-ml retry errors instead of driving
them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/sd.c | 76 ++++++++++++++++++++++++++++-------------------
 1 file changed, 45 insertions(+), 31 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 0545fadde8c5..96cf5189dea3 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2435,45 +2435,59 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
 static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
 						unsigned char *buffer)
 {
-	unsigned char cmd[16];
+	static const u8 cmd[10] = { READ_CAPACITY };
 	struct scsi_sense_hdr sshdr;
 	int sense_valid = 0;
 	int the_result;
-	int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
 	sector_t lba;
 	unsigned sector_size;
+	struct scsi_failure failures[] = {
+		/* Fail immediately for Medium Not Present */
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x3A,
+			.ascq = 0x0,
+			.allowed = 0,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = NOT_READY,
+			.asc = 0x3A,
+			.ascq = 0x0,
+			.allowed = 0,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x29,
+			.ascq = 0,
+			/* Device reset might occur several times */
+			.allowed = READ_CAPACITY_RETRIES_ON_RESET,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		/* Any other error not listed above retry */
+		{
+			.result = SCMD_FAILURE_RESULT_ANY,
+			.allowed = 3,
+		},
+		{},
+	};
 
-	do {
-		cmd[0] = READ_CAPACITY;
-		memset(&cmd[1], 0, 9);
-		memset(buffer, 0, 8);
-
-		the_result = scsi_exec_req(((struct scsi_exec_args) {
-						.sdev = sdp,
-						.cmd = cmd,
-						.data_dir = DMA_FROM_DEVICE,
-						.buf = buffer,
-						.buf_len = 8,
-						.sshdr = &sshdr,
-						.timeout = SD_TIMEOUT,
-						.retries = sdkp->max_retries }));
-
-		if (media_not_present(sdkp, &sshdr))
-			return -ENODEV;
+	memset(buffer, 0, 8);
 
-		if (the_result > 0) {
-			sense_valid = scsi_sense_valid(&sshdr);
-			if (sense_valid &&
-			    sshdr.sense_key == UNIT_ATTENTION &&
-			    sshdr.asc == 0x29 && sshdr.ascq == 0x00)
-				/* Device reset might occur several times,
-				 * give it one more chance */
-				if (--reset_retries > 0)
-					continue;
-		}
-		retries--;
+	the_result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdp,
+					.cmd = cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = buffer,
+					.buf_len = 8,
+					.sshdr = &sshdr,
+					.timeout = SD_TIMEOUT,
+					.retries = sdkp->max_retries,
+					.failures = failures }));
 
-	} while (the_result && retries);
+	if (media_not_present(sdkp, &sshdr))
+		return -ENODEV;
 
 	if (the_result) {
 		sd_print_result(sdkp, "Read Capacity(10) failed", the_result);
-- 
2.25.1

[PATCH v6 32/35] scsi: ses: Have scsi-ml retry scsi_exec_req errors

[Mike Christie]

This has ses have scsi-ml retry scsi_exec_req errors instead of driving
them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/ses.c | 84 ++++++++++++++++++++++++++++------------------
 1 file changed, 52 insertions(+), 32 deletions(-)

diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index c90722aa552c..d8b31c0b0125 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -87,23 +87,33 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 		0
 	};
 	unsigned char recv_page_code;
-	unsigned int retries = SES_RETRIES;
-	struct scsi_sense_hdr sshdr;
-
-	do {
-		ret = scsi_exec_req(((struct scsi_exec_args) {
-					.sdev = sdev,
-					.cmd = cmd,
-					.data_dir = DMA_FROM_DEVICE,
-					.buf = buf,
-					.buf_len = bufflen,
-					.sshdr = &sshdr,
-					.timeout = SES_TIMEOUT,
-					.retries = 1 }));
-	} while (ret > 0 && --retries && scsi_sense_valid(&sshdr) &&
-		 (sshdr.sense_key == NOT_READY ||
-		  (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x29,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = SES_RETRIES,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = NOT_READY,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = SES_RETRIES,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 
+	ret = scsi_exec_req(((struct scsi_exec_args) {
+				.sdev = sdev,
+				.cmd = cmd,
+				.data_dir = DMA_FROM_DEVICE,
+				.buf = buf,
+				.buf_len = bufflen,
+				.timeout = SES_TIMEOUT,
+				.retries = 1,
+				.failures = failures }));
 	if (unlikely(ret))
 		return ret;
 
@@ -135,23 +145,33 @@ static int ses_send_diag(struct scsi_device *sdev, int page_code,
 		bufflen & 0xff,
 		0
 	};
-	struct scsi_sense_hdr sshdr;
-	unsigned int retries = SES_RETRIES;
-
-	do {
-		result = scsi_exec_req(((struct scsi_exec_args) {
-						.sdev = sdev,
-						.cmd = cmd,
-						.data_dir = DMA_TO_DEVICE,
-						.buf = buf,
-						.buf_len = bufflen,
-						.sshdr = &sshdr,
-						.timeout = SES_TIMEOUT,
-						.retries = 1 }));
-	} while (result > 0 && --retries && scsi_sense_valid(&sshdr) &&
-		 (sshdr.sense_key == NOT_READY ||
-		  (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x29,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = SES_RETRIES,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = NOT_READY,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = SES_RETRIES,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 
+	result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdev,
+					.cmd = cmd,
+					.data_dir = DMA_TO_DEVICE,
+					.buf = buf,
+					.buf_len = bufflen,
+					.timeout = SES_TIMEOUT,
+					.retries = 1,
+					.failures = failures }));
 	if (result)
 		sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n",
 			    result);
-- 
2.25.1

[PATCH v6 33/35] scsi: sr: Have scsi-ml retry get_sectorsize errors

[Mike Christie]

This has get_sectorsize have scsi-ml retry errors instead of driving them
itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/sr.c | 43 ++++++++++++++++++++-----------------------
 1 file changed, 20 insertions(+), 23 deletions(-)

diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index e3171f040fe1..1edc0647a15c 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -725,32 +725,29 @@ static int sr_probe(struct device *dev)
 
 static void get_sectorsize(struct scsi_cd *cd)
 {
-	unsigned char cmd[10];
-	unsigned char buffer[8];
-	int the_result, retries = 3;
+	static const u8 cmd[10] = { READ_CAPACITY };
+	unsigned char buffer[8] = { };
+	int the_result;
 	int sector_size;
 	struct request_queue *queue;
+	struct scsi_failure failures[] = {
+		{
+			.result = SCMD_FAILURE_RESULT_ANY,
+			.allowed = 3,
+		},
+		{},
+	};
 
-	do {
-		cmd[0] = READ_CAPACITY;
-		memset((void *) &cmd[1], 0, 9);
-		memset(buffer, 0, sizeof(buffer));
-
-		/* Do the command and wait.. */
-		the_result = scsi_exec_req(((struct scsi_exec_args) {
-						.sdev = cd->device,
-						.cmd = cmd,
-						.data_dir = DMA_FROM_DEVICE,
-						.buf = buffer,
-						.buf_len = sizeof(buffer),
-						.timeout = SR_TIMEOUT,
-						.retries = MAX_RETRIES }));
-
-		retries--;
-
-	} while (the_result && retries);
-
-
+	/* Do the command and wait.. */
+	the_result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = cd->device,
+					.cmd = cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = buffer,
+					.buf_len = sizeof(buffer),
+					.timeout = SR_TIMEOUT,
+					.retries = MAX_RETRIES,
+					.failures = failures }));
 	if (the_result) {
 		cd->capacity = 0x1fffff;
 		sector_size = 2048;	/* A guess, just in case */
-- 
2.25.1

[PATCH v6 34/35] scsi: ufs: Have scsi-ml retry start stop errors

[Mike Christie]

This has scsi-ml retry errors instead of driving them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
---
 drivers/ufs/core/ufshcd.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index fbd694bc4ef9..a8415e1b8a4e 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -8719,6 +8719,12 @@ static int ufshcd_execute_start_stop(struct scsi_device *sdev,
 	struct request *req;
 	struct scsi_cmnd *scmd;
 	int ret;
+	struct scsi_failure failures[] = {
+		{
+			.allowed = 2,
+			.result = SCMD_FAILURE_RESULT_ANY,
+		},
+	};
 
 	req = scsi_alloc_request(sdev->request_queue, REQ_OP_DRV_IN,
 				 BLK_MQ_REQ_PM);
@@ -8730,6 +8736,7 @@ static int ufshcd_execute_start_stop(struct scsi_device *sdev,
 	memcpy(scmd->cmnd, cdb, scmd->cmd_len);
 	scmd->allowed = 0/*retries*/;
 	scmd->flags |= SCMD_FAIL_IF_RECOVERING;
+	scmd->failures = failures;
 	req->timeout = 1 * HZ;
 	req->rq_flags |= RQF_PM | RQF_QUIET;
 
@@ -8760,7 +8767,7 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
 	struct scsi_sense_hdr sshdr;
 	struct scsi_device *sdp;
 	unsigned long flags;
-	int ret, retries;
+	int ret;
 
 	spin_lock_irqsave(hba->host->host_lock, flags);
 	sdp = hba->ufs_device_wlun;
@@ -8786,15 +8793,7 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
 	 * callbacks hence set the RQF_PM flag so that it doesn't resume the
 	 * already suspended childs.
 	 */
-	for (retries = 3; retries > 0; --retries) {
-		ret = ufshcd_execute_start_stop(sdp, pwr_mode, &sshdr);
-		/*
-		 * scsi_execute() only returns a negative value if the request
-		 * queue is dying.
-		 */
-		if (ret <= 0)
-			break;
-	}
+	ret = ufshcd_execute_start_stop(sdp, pwr_mode, &sshdr);
 	if (ret) {
 		sdev_printk(KERN_WARNING, sdp,
 			    "START_STOP failed for power mode: %d, result %x\n",
-- 
2.25.1

[PATCH v6 35/35] scsi: Add kunit tests for scsi_check_passthrough

[Mike Christie]

Add some kunit tests for scsi_check_passthrough so we can easily make sure
we are hitting the cases it's difficult to replicate in hardware or even
scsi_debug.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
---
 drivers/scsi/Kconfig           |   9 ++
 drivers/scsi/scsi_error.c      |   4 +
 drivers/scsi/scsi_error_test.c | 171 +++++++++++++++++++++++++++++++++
 3 files changed, 184 insertions(+)
 create mode 100644 drivers/scsi/scsi_error_test.c

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 03e71e3d5e5b..52147a848824 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -67,6 +67,15 @@ config SCSI_PROC_FS
 
 	  If unsure say Y.
 
+config SCSI_KUNIT_TEST
+	tristate "KUnit tests for SCSI Mid Layer" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Run SCSI Mid Layer's KUnit tests.
+
+	  If unsure say N.
+
 comment "SCSI support type (disk, tape, CD-ROM)"
 	depends on SCSI
 
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 77d7ad07645a..8d1a34a8bb3d 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -2613,3 +2613,7 @@ bool scsi_get_sense_info_fld(const u8 *sense_buffer, int sb_len,
 	}
 }
 EXPORT_SYMBOL(scsi_get_sense_info_fld);
+
+#if defined(CONFIG_SCSI_KUNIT_TEST)
+#include "scsi_error_test.c"
+#endif
diff --git a/drivers/scsi/scsi_error_test.c b/drivers/scsi/scsi_error_test.c
new file mode 100644
index 000000000000..23a2e7edc5eb
--- /dev/null
+++ b/drivers/scsi/scsi_error_test.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * KUnit tests for scsi_error.c.
+ *
+ * Copyright (C) 2022, Oracle Corporation
+ */
+#include <kunit/test.h>
+
+#include <scsi/scsi_proto.h>
+#include <scsi/scsi_cmnd.h>
+
+#define SCSI_TEST_ERROR_MAX_ALLOWED 3
+
+static void scsi_test_error_check_passthough(struct kunit *test)
+{
+	struct scsi_failure multiple_sense_failures[] = {
+		{
+			.sense = DATA_PROTECT,
+			.asc = 0x1,
+			.ascq = 0x1,
+			.allowed = 0,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x11,
+			.ascq = 0x0,
+			.allowed = SCSI_TEST_ERROR_MAX_ALLOWED,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = NOT_READY,
+			.asc = 0x11,
+			.ascq = 0x22,
+			.allowed = SCSI_TEST_ERROR_MAX_ALLOWED,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = ABORTED_COMMAND,
+			.asc = 0x11,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = SCSI_TEST_ERROR_MAX_ALLOWED,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = HARDWARE_ERROR,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.allowed = SCSI_TEST_ERROR_MAX_ALLOWED,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = ILLEGAL_REQUEST,
+			.asc = 0x91,
+			.ascq = 0x36,
+			.allowed = SCSI_TEST_ERROR_MAX_ALLOWED,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
+	struct scsi_failure retryable_host_failures[] = {
+		{
+			.result = DID_TRANSPORT_DISRUPTED << 16,
+			.allowed = SCSI_TEST_ERROR_MAX_ALLOWED,
+		},
+		{
+			.result = DID_TIME_OUT << 16,
+			.allowed = SCSI_TEST_ERROR_MAX_ALLOWED,
+		},
+		{},
+	};
+	struct scsi_failure any_status_failures[] = {
+		{
+			.result = SCMD_FAILURE_STAT_ANY,
+			.allowed = SCSI_TEST_ERROR_MAX_ALLOWED,
+		},
+		{},
+	};
+	struct scsi_failure any_sense_failures[] = {
+		{
+			.result = SCMD_FAILURE_SENSE_ANY,
+			.allowed = SCSI_TEST_ERROR_MAX_ALLOWED,
+		},
+		{},
+	};
+	struct scsi_failure any_failures[] = {
+		{
+			.result = SCMD_FAILURE_RESULT_ANY,
+			.allowed = SCSI_TEST_ERROR_MAX_ALLOWED,
+		},
+		{},
+	};
+	u8 sense[SCSI_SENSE_BUFFERSIZE] = {};
+	struct scsi_cmnd sc = {
+		.sense_buffer = sense,
+		.failures = multiple_sense_failures,
+	};
+	int i;
+
+	/* Match end of array */
+	scsi_build_sense(&sc, 0, ILLEGAL_REQUEST, 0x91, 0x36);
+	KUNIT_EXPECT_EQ(test, NEEDS_RETRY, scsi_check_passthrough(&sc));
+	/* Basic match in array */
+	scsi_build_sense(&sc, 0, UNIT_ATTENTION, 0x11, 0x0);
+	KUNIT_EXPECT_EQ(test, NEEDS_RETRY, scsi_check_passthrough(&sc));
+	/* No matching sense entry */
+	scsi_build_sense(&sc, 0, MISCOMPARE, 0x11, 0x11);
+	KUNIT_EXPECT_EQ(test, SCSI_RETURN_NOT_HANDLED,
+			scsi_check_passthrough(&sc));
+	/* Match using SCMD_FAILURE_ASCQ_ANY */
+	scsi_build_sense(&sc, 0, ABORTED_COMMAND, 0x22, 0x22);
+	KUNIT_EXPECT_EQ(test, SCSI_RETURN_NOT_HANDLED,
+			scsi_check_passthrough(&sc));
+	/* Match using SCMD_FAILURE_ASC_ANY */
+	scsi_build_sense(&sc, 0, HARDWARE_ERROR, 0x11, 0x22);
+	KUNIT_EXPECT_EQ(test, NEEDS_RETRY, scsi_check_passthrough(&sc));
+	/* No matching status entry */
+	sc.result = SAM_STAT_RESERVATION_CONFLICT;
+	KUNIT_EXPECT_EQ(test, SCSI_RETURN_NOT_HANDLED,
+			scsi_check_passthrough(&sc));
+
+	/* Test hitting allowed limit */
+	scsi_build_sense(&sc, 0, NOT_READY, 0x11, 0x22);
+	for (i = 0; i < SCSI_TEST_ERROR_MAX_ALLOWED; i++)
+		KUNIT_EXPECT_EQ(test, NEEDS_RETRY, scsi_check_passthrough(&sc));
+	KUNIT_EXPECT_EQ(test, SUCCESS, scsi_check_passthrough(&sc));
+
+	/* Match using SCMD_FAILURE_SENSE_ANY */
+	sc.failures = any_sense_failures;
+	scsi_build_sense(&sc, 0, MEDIUM_ERROR, 0x11, 0x22);
+	KUNIT_EXPECT_EQ(test, NEEDS_RETRY, scsi_check_passthrough(&sc));
+
+	/* reset retries so we can retest */
+	for (i = 0; i < ARRAY_SIZE(multiple_sense_failures); i++)
+		multiple_sense_failures[i].retries = 0;
+
+	/* Test no retries allowed */
+	sc.failures = multiple_sense_failures;
+	scsi_build_sense(&sc, 0, DATA_PROTECT, 0x1, 0x1);
+	KUNIT_EXPECT_EQ(test, SUCCESS, scsi_check_passthrough(&sc));
+
+	/* No matching host byte entry */
+	sc.failures = retryable_host_failures;
+	sc.result = DID_NO_CONNECT << 16;
+	KUNIT_EXPECT_EQ(test, SCSI_RETURN_NOT_HANDLED,
+			scsi_check_passthrough(&sc));
+	/* Matching host byte entry */
+	sc.result = DID_TIME_OUT << 16;
+	KUNIT_EXPECT_EQ(test, NEEDS_RETRY, scsi_check_passthrough(&sc));
+
+	/* Match SCMD_FAILURE_RESULT_ANY */
+	sc.failures = any_failures;
+	sc.result = DID_TRANSPORT_FAILFAST << 16;
+	KUNIT_EXPECT_EQ(test, NEEDS_RETRY, scsi_check_passthrough(&sc));
+
+	/* Test any status handling */
+	sc.failures = any_status_failures;
+	sc.result = SAM_STAT_RESERVATION_CONFLICT;
+	KUNIT_EXPECT_EQ(test, NEEDS_RETRY, scsi_check_passthrough(&sc));
+}
+
+static struct kunit_case scsi_test_error_cases[] = {
+	KUNIT_CASE(scsi_test_error_check_passthough),
+	{},
+};
+
+static struct kunit_suite scsi_test_error_suite = {
+	.name = "scsi_error",
+	.test_cases = scsi_test_error_cases,
+};
+
+kunit_test_suite(scsi_test_error_suite);
-- 
2.25.1

Re: [PATCH v6 02/35] scsi: Allow passthrough to override what errors to retry

[Bart Van Assche]

On 11/4/22 16:18, Mike Christie wrote:
> +/**
> + * scsi_check_passthrough - Determine if passthrough scsi_cmnd needs a retry.
> + * @scmd: scsi_cmnd to check.
> + *
> + * Return value:
> + *	SCSI_RETURN_NOT_HANDLED - if the caller should process the command

Should "process the command" perhaps be changed into "examine the 
command status" since SCSI devices process SCSI commands while 
scsi_check_passthrough() callers examine the command status? Otherwise 
this patch looks good to me. Hence:

Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Re: [PATCH v6 02/35] scsi: Allow passthrough to override what errors to retry

[Mike Christie]

On 11/8/22 5:57 PM, Bart Van Assche wrote:
> On 11/4/22 16:18, Mike Christie wrote:
>> +/**
>> + * scsi_check_passthrough - Determine if passthrough scsi_cmnd needs a retry.
>> + * @scmd: scsi_cmnd to check.
>> + *
>> + * Return value:
>> + *    SCSI_RETURN_NOT_HANDLED - if the caller should process the command
> 
> Should "process the command" perhaps be changed into "examine the command status" since SCSI devices process SCSI commands while scsi_check_passthrough() callers examine the command status? Otherwise this patch looks good to me. Hence:
> 
> Reviewed-by: Bart Van Assche <bvanassche@acm.org>

I like your suggestion and will change it.

Re: [PATCH v6 21/35] scsi: Have scsi-ml retry read_capacity_16 errors

[Bart Van Assche]

On 11/4/22 16:19, Mike Christie wrote:
> This has read_capacity_16 have scsi-ml retry errors instead of driving
> them itself.
> 
> Signed-off-by: Mike Christie <michael.christie@oracle.com>
> Reviewed-by: Martin Wilck <mwilck@suse.com>

Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Re: [PATCH v6 22/35] scsi: Have scsi-ml retry sd_spinup_disk errors

[Bart Van Assche]

On 11/4/22 16:19, Mike Christie wrote:
> This simplifies sd_spinup_disk so scsi-ml retries errors for it. Note that
> we retried specifically on a UA and also if scsi_status_is_good returned
> failed which would happen for all check conditions. In this patch we use
> SCMD_FAILURE_STAT_ANY which will trigger for the same conditions as
> when scsi_status_is_good returns false. This will cover all CCs including
> UAs so there is no explicit failures arrary entry for UAs.
> 
> We do not handle the outside loop's retries because we want to sleep
> between tried and we don't support that yet.

tried -> tries? Anyway:

Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Re: [PATCH v6 26/35] scsi: sd: Have scsi-ml retry sd_sync_cache errors

[Bart Van Assche]

On 11/4/22 16:19, Mike Christie wrote:
> +	static const u8 cmd[10] = { SYNCHRONIZE_CACHE };
> +	int res;

[ ... ]

> +	/*
> +	 * Leave the rest of the command zero to indicate flush everything.
> +	 */
> +	res = scsi_exec_req(((struct scsi_exec_args) {
> +				.sdev = sdp,
> +				.cmd = cmd,
> +				.data_dir = DMA_NONE,
> +				.sshdr = sshdr,
> +				.timeout = timeout,
> +				.retries = sdkp->max_retries,
> +				.req_flags = RQF_PM,
> +				.failures = failures }));

The "leave the rest" comment seems misplaced to me. I think it should be 
moved above the cmd[10] definition. If that comment is moved, please add:

Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Re: [PATCH v6 27/35] scsi: ch: Have scsi-ml retry ch_do_scsi errors

[Bart Van Assche]

On 11/4/22 16:19, Mike Christie wrote:
> This has ch_do_scsi have scsi-ml retry errors instead of driving them
> itself.

How about splitting this patch into two patches - one patch that removes 
the 'unit_attention' member variable and a second patch that reworks 
scsi_exec_req() error handling? With or without that change:

Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Re: [PATCH v6 28/35] scsi: Have scsi-ml retry scsi_mode_sense errors

[Bart Van Assche]

On 11/4/22 16:19, Mike Christie wrote:
> This has scsi_mode_sense have scsi-ml retry errors instead of driving them
> itself.
  Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Re: [PATCH v6 29/35] scsi: Have scsi-ml retry scsi_report_lun_scan errors

[Bart Van Assche]

On 11/4/22 16:19, Mike Christie wrote:
> This has scsi_report_lun_scan have scsi-ml retry errors instead of driving
> them itself.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Re: [PATCH v6 30/35] scsi: sd: Have sd_pr_command retry UAs

[Bart Van Assche]

On 11/4/22 16:19, Mike Christie wrote:
> It's common to get a UA when doing PR commands. It could be due to a
> target restarting, transport level relogin or other PR commands like a
> release causing it. The upper layers don't get the sense and in some cases
> have no idea if it's a SCSI device, so this has the sd layer retry.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Re: [PATCH v6 31/35] scsi: sd: Have scsi-ml retry read_capacity_10 errors

[Bart Van Assche]

On 11/4/22 16:19, Mike Christie wrote:
> This has read_capacity_10 have scsi-ml retry errors instead of driving
> them itself.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Re: [PATCH v6 34/35] scsi: ufs: Have scsi-ml retry start stop errors

[Bart Van Assche]

On 11/4/22 16:19, Mike Christie wrote:
> This has scsi-ml retry errors instead of driving them itself.
> 
> Signed-off-by: Mike Christie <michael.christie@oracle.com>
> ---
>   drivers/ufs/core/ufshcd.c | 19 +++++++++----------
>   1 file changed, 9 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
> index fbd694bc4ef9..a8415e1b8a4e 100644
> --- a/drivers/ufs/core/ufshcd.c
> +++ b/drivers/ufs/core/ufshcd.c
> @@ -8719,6 +8719,12 @@ static int ufshcd_execute_start_stop(struct scsi_device *sdev,
>   	struct request *req;
>   	struct scsi_cmnd *scmd;
>   	int ret;
> +	struct scsi_failure failures[] = {
> +		{
> +			.allowed = 2,
> +			.result = SCMD_FAILURE_RESULT_ANY,
> +		},
> +	};
>   
>   	req = scsi_alloc_request(sdev->request_queue, REQ_OP_DRV_IN,
>   				 BLK_MQ_REQ_PM);
> @@ -8730,6 +8736,7 @@ static int ufshcd_execute_start_stop(struct scsi_device *sdev,
>   	memcpy(scmd->cmnd, cdb, scmd->cmd_len);
>   	scmd->allowed = 0/*retries*/;
>   	scmd->flags |= SCMD_FAIL_IF_RECOVERING;
> +	scmd->failures = failures;
>   	req->timeout = 1 * HZ;
>   	req->rq_flags |= RQF_PM | RQF_QUIET;
>   
> @@ -8760,7 +8767,7 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
>   	struct scsi_sense_hdr sshdr;
>   	struct scsi_device *sdp;
>   	unsigned long flags;
> -	int ret, retries;
> +	int ret;
>   
>   	spin_lock_irqsave(hba->host->host_lock, flags);
>   	sdp = hba->ufs_device_wlun;
> @@ -8786,15 +8793,7 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
>   	 * callbacks hence set the RQF_PM flag so that it doesn't resume the
>   	 * already suspended childs.
>   	 */
> -	for (retries = 3; retries > 0; --retries) {
> -		ret = ufshcd_execute_start_stop(sdp, pwr_mode, &sshdr);
> -		/*
> -		 * scsi_execute() only returns a negative value if the request
> -		 * queue is dying.
> -		 */
> -		if (ret <= 0)
> -			break;
> -	}
> +	ret = ufshcd_execute_start_stop(sdp, pwr_mode, &sshdr);
>   	if (ret) {
>   		sdev_printk(KERN_WARNING, sdp,
>   			    "START_STOP failed for power mode: %d, result %x\n",

ufshcd_execute_start_stop() has been introduced because scsi_execute() 
does not support setting the SCMD_FAIL_IF_RECOVERING flag. If support 
for setting the SCSI flags would be added to scsi_execute() that would 
allow to remove the ufshcd_execute_start_stop() function. I can 
implement this with a follow-up patch if you prefer that I implement 
this change.

Since I'm fine with the above changes:

Acked-by: Bart Van Assche <bvanassche@acm.org>

Re: [PATCH v6 35/35] scsi: Add kunit tests for scsi_check_passthrough

[Bart Van Assche]

On 11/4/22 16:19, Mike Christie wrote:
> Add some kunit tests for scsi_check_passthrough so we can easily make sure
> we are hitting the cases it's difficult to replicate in hardware or even
> scsi_debug.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Re: [PATCH v6 03/35] scsi: Add struct for args to execution functions

[John Garry]

On 04/11/2022 23:18, Mike Christie wrote:
> -		 req_flags_t rq_flags, int *resid)
> +int __scsi_exec_req(const struct scsi_exec_args *args)

nit: I would expect a req to be passed based on the name, like 
blk_execute_rq()

>   {
>   	struct request *req;
>   	struct scsi_cmnd *scmd;
>   	int ret;
>   
> -	req = scsi_alloc_request(sdev->request_queue,
> -			data_direction == DMA_TO_DEVICE ?
> -			REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
> -			rq_flags & RQF_PM ? BLK_MQ_REQ_PM : 0);
> +	req = scsi_alloc_request(args->sdev->request_queue,
> +				 args->data_dir == DMA_TO_DEVICE ?
> +				 REQ_OP_DRV_OUT : REQ_OP_DRV_IN,

Did you ever consider just putting the scsi_alloc_request() opf arg in 
struct scsi_exec_args (rather than data_dir), i.e. have the caller 
evaluate? We already do it in other callers to scsi_alloc_request().

Current method means a store (in scsi_exec_args struct), a load, a 
comparison, and a mov value to register whose value depends on 
comparison. That's most relevant on performance being a concern.

Thanks,
John

Re: [PATCH v6 03/35] scsi: Add struct for args to execution functions

[Bart Van Assche]

On 11/10/22 03:15, John Garry wrote:
> Current method means a store (in scsi_exec_args struct), a load, a 
> comparison, and a mov value to register whose value depends on 
> comparison. That's most relevant on performance being a concern.

Hi John,

Is there any code that calls scsi_execute() from a code path in which 
performance matters?

Thanks,

Bart.

Re: [PATCH v6 03/35] scsi: Add struct for args to execution functions

[John Garry]

On 10/11/2022 17:26, Bart Van Assche wrote:
> n 11/10/22 03:15, John Garry wrote:
>> Current method means a store (in scsi_exec_args struct), a load, a 
>> comparison, and a mov value to register whose value depends on 
>> comparison. That's most relevant on performance being a concern.
> 
> Hi John,
> 
> Is there any code that calls scsi_execute() from a code path in which 
> performance matters?

Eh, I don't know. Does performance matter for the touched ioctls or 
probe lun code?

Anyway, this code I mention is just the same as before. It just bugs me 
when I see code which accepts a hardcoded value (dma dir, in this case) 
and translates into another value, when the translated value could be 
just passed.

Thanks,
John

Re: [PATCH v6 03/35] scsi: Add struct for args to execution functions

[Mike Christie]

On 11/10/22 12:09 PM, John Garry wrote:
> On 10/11/2022 17:26, Bart Van Assche wrote:
>> n 11/10/22 03:15, John Garry wrote:
>>> Current method means a store (in scsi_exec_args struct), a load, a comparison, and a mov value to register whose value depends on comparison. That's most relevant on performance being a concern.
>>
>> Hi John,
>>
>> Is there any code that calls scsi_execute() from a code path in which performance matters?
> 
> Eh, I don't know. Does performance matter for the touched ioctls or probe lun code?

No.

Re: [PATCH v6 03/35] scsi: Add struct for args to execution functions

[Mike Christie]

On 11/10/22 5:15 AM, John Garry wrote:
> On 04/11/2022 23:18, Mike Christie wrote:
>> -         req_flags_t rq_flags, int *resid)
>> +int __scsi_exec_req(const struct scsi_exec_args *args)
> 
> nit: I would expect a req to be passed based on the name, like blk_execute_rq()
> 

We have scsi_exeucute_req now which works like scsi_exec_req. I carried it over
because it seemed nice that it reflects we are executing a request vs something
like a TMF. I don't care either way if people have a preference.


>>   {
>>       struct request *req;
>>       struct scsi_cmnd *scmd;
>>       int ret;
>>   -    req = scsi_alloc_request(sdev->request_queue,
>> -            data_direction == DMA_TO_DEVICE ?
>> -            REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
>> -            rq_flags & RQF_PM ? BLK_MQ_REQ_PM : 0);
>> +    req = scsi_alloc_request(args->sdev->request_queue,
>> +                 args->data_dir == DMA_TO_DEVICE ?
>> +                 REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
> 
> Did you ever consider just putting the scsi_alloc_request() opf arg in struct scsi_exec_args (rather than data_dir), i.e. have the caller evaluate? We already do it in other callers to scsi_alloc_request().

I did, but this part of the patches just convert us to the args struct
use. I tried to not change the types to keep the patchset down.

I'll change the types in another patchset, but I think it's better to
do in a separate patchset because I think we can do some more cleanup.
The users that use scsi_allocate_request are kind of a mix match mess
in that we use the scsi helper to allocate the request and scsi_cmnd,
then setup the request directly and then use the blk_execute_rq helper.
So I was thinking they use the flags directly since they are using the
block layer APIs where the scsi_execute* users are trying to use a SCSI
interface where the DMA values are also used (LLDs use DMA flags, ULDs
use a mix because they convert between block and SCSI, and scsi-ml uses
both as well).

Re: [PATCH v6 03/35] scsi: Add struct for args to execution functions

[Mike Christie]

On 11/10/22 12:40 PM, Mike Christie wrote:
> On 11/10/22 5:15 AM, John Garry wrote:
>> On 04/11/2022 23:18, Mike Christie wrote:
>>> -         req_flags_t rq_flags, int *resid)
>>> +int __scsi_exec_req(const struct scsi_exec_args *args)
>>
>> nit: I would expect a req to be passed based on the name, like blk_execute_rq()
>>
> 
> We have scsi_exeucute_req now which works like scsi_exec_req. I carried it over
> because it seemed nice that it reflects we are executing a request vs something
> like a TMF. I don't care either way if people have a preference.
> 
> 
>>>   {
>>>       struct request *req;
>>>       struct scsi_cmnd *scmd;
>>>       int ret;
>>>   -    req = scsi_alloc_request(sdev->request_queue,
>>> -            data_direction == DMA_TO_DEVICE ?
>>> -            REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
>>> -            rq_flags & RQF_PM ? BLK_MQ_REQ_PM : 0);
>>> +    req = scsi_alloc_request(args->sdev->request_queue,
>>> +                 args->data_dir == DMA_TO_DEVICE ?
>>> +                 REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
>>
>> Did you ever consider just putting the scsi_alloc_request() opf arg in struct scsi_exec_args (rather than data_dir), i.e. have the caller evaluate? We already do it in other callers to scsi_alloc_request().
> 
> I did, but this part of the patches just convert us to the args struct
> use. I tried to not change the types to keep the patchset down.
> 
> I'll change the types in another patchset,

Oh wait, I could probably handle your comments in this set if we
wanted to.

scsi_execute could already take the block layer flags, so we already
are doing that type of thing so when I was thinking the scsi_execute
interface should be less block layer'y I was wrong. So, I could convert
the users to use the REQ_OP_DRV instead of DMA values when I do the args
conversion since we normally do just pass it in the directly (vs libata
where we do some extra work).

One thing that is weird to me is that scsi_execute_req is the more scsi'ish
interface. I would have thought since it took the req flag since it has the
req naming in it.

I don't care either way.

Re: [PATCH v6 03/35] scsi: Add struct for args to execution functions

[Bart Van Assche]

On 11/10/22 11:26, Mike Christie wrote:
> One thing that is weird to me is that scsi_execute_req is the more scsi'ish
> interface. I would have thought since it took the req flag since it has the
> req naming in it.
> 
> I don't care either way.

Although this is not a strong argument, it is an argument: passing a DMA 
direction is slightly more descriptive than passing REQ_OP_DRV_* since 
the information that no data is passed would be lost if the DMA 
direction argument would be changed into a REQ_OP_DRV_* argument.

Bart.

Re: [PATCH v6 03/35] scsi: Add struct for args to execution functions

[John Garry]

On 10/11/2022 19:26, Mike Christie wrote:
>> I'll change the types in another patchset,
> Oh wait, I could probably handle your comments in this set if we
> wanted to.

hmmm...maybe it's better to be done in another series, as you might get 
bogged down here with other comments ...

> scsi_execute could already take the block layer flags, so we already
> are doing that type of thing so when I was thinking the scsi_execute
> interface should be less block layer'y I was wrong. So, I could convert
> the users to use the REQ_OP_DRV instead of DMA values when I do the args
> conversion since we normally do just pass it in the directly (vs libata
> where we do some extra work).

Further to that, I do wonder why we even need a separate dma_dir flag at 
all.

We already pass a blk_opt_t arg in flags, so why have a separate conduit 
to set REQ_OP_DRV_{IN/OUT}? A couple of other observations:
a. why do we manually set req->cmd_flags from flags instead of passing 
flags directly to scsi_alloc_request()
b. why pass a req_flags_t instead of a blk_mq_req_flags_t - as I see, 
rq_flags arg is only ever set to RQF_PM or 0, so no need for a conversion.

> 
> One thing that is weird to me is that scsi_execute_req is the more scsi'ish
> interface. I would have thought since it took the req flag since it has the
> req naming in it.
> 
> I don't care either way.

Thanks,
John

Re: [PATCH v6 02/35] scsi: Allow passthrough to override what errors to retry

[Christoph Hellwig]

On Fri, Nov 04, 2022 at 06:18:54PM -0500, Mike Christie wrote:
> +	if (!scmd->result || !scmd->failures)
> +		return SCSI_RETURN_NOT_HANDLED;

I'd probably move the ->result check into the caller to make it clear
thi code is a no-op for successful execution.

Otherwise looks good:

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH v6 03/35] scsi: Add struct for args to execution functions

[Christoph Hellwig]

On Fri, Nov 11, 2022 at 12:07:26PM +0000, John Garry wrote:
> We already pass a blk_opt_t arg in flags, so why have a separate conduit to 
> set REQ_OP_DRV_{IN/OUT}? A couple of other observations:
> a. why do we manually set req->cmd_flags from flags instead of passing 
> flags directly to scsi_alloc_request()
> b. why pass a req_flags_t instead of a blk_mq_req_flags_t - as I see, 
> rq_flags arg is only ever set to RQF_PM or 0, so no need for a conversion.

Mostly historic I guess.  But to me the fact that the blk_opf_t is
passed is a good argument for only passing that and not an extra
DMA direction.

rq_flags is a mess - the flags to the request allocator are different
from those at runtime, and the PM case needs both.  We'll eventually
need to clean this up in the block layer, but this is not the time.

Re: [PATCH v6 03/35] scsi: Add struct for args to execution functions

[Christoph Hellwig]

On Fri, Nov 04, 2022 at 06:18:55PM -0500, Mike Christie wrote:
> This begins to move the SCSI execution functions to use a struct for
> passing in args. This patch adds the new struct, converts the low level
> helpers and then adds a new helper the next patches will convert the rest
> of the code to.
> 
> Signed-off-by: Mike Christie <michael.christie@oracle.com>
> Reviewed-by: Martin Wilck <mwilck@suse.com>
> Reviewed-by: Bart Van Assche <bvanassche@acm.org>
> ---
>  drivers/scsi/scsi_lib.c    | 69 +++++++++++++++-----------------------
>  include/scsi/scsi_device.h | 69 ++++++++++++++++++++++++++++++--------
>  2 files changed, 82 insertions(+), 56 deletions(-)
> 
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index fc1560981a03..f832befb50b0 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -185,55 +185,39 @@ void scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
>  	__scsi_queue_insert(cmd, reason, true);
>  }
>  
> -
>  /**
> - * __scsi_execute - insert request and wait for the result
> - * @sdev:	scsi device
> - * @cmd:	scsi command
> - * @data_direction: data direction
> - * @buffer:	data buffer
> - * @bufflen:	len of buffer
> - * @sense:	optional sense buffer
> - * @sshdr:	optional decoded sense header
> - * @timeout:	request timeout in HZ
> - * @retries:	number of times to retry request
> - * @flags:	flags for ->cmd_flags
> - * @rq_flags:	flags for ->rq_flags
> - * @resid:	optional residual length
> + * __scsi_exec_req - insert request and wait for the result
> + * @scsi_exec_args: See struct definition for description of each field
>   *
>   * Returns the scsi_cmnd result field if a command was executed, or a negative
>   * Linux error code if we didn't get that far.
>   */
> -int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
> -		 int data_direction, void *buffer, unsigned bufflen,
> -		 unsigned char *sense, struct scsi_sense_hdr *sshdr,
> -		 int timeout, int retries, blk_opf_t flags,
> -		 req_flags_t rq_flags, int *resid)
> +int __scsi_exec_req(const struct scsi_exec_args *args)

I find the struct for everyhing a somewhat confusing calling convention.
So I'd pass the required arguments directly, and stuff all the optional
bits into the struct.  Based on the previous discussion maybe
something like:

int __scsi_execute_cmd(struct scsi_device *sdev, const unsigned char *cmd,
		blk_opf_t opf, void *buffer, unsigned int bufflen,
		int timeout, int retries,
		const struct scsi_exec_args *args)

which would be a nice replacement for all the existing scsi_execute*
interfaces.

Re: [PATCH v6 04/35] scsi: Add scsi_failure field to scsi_exec_args

[Christoph Hellwig]

Looks good:

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH v6 03/35] scsi: Add struct for args to execution functions

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 19371 bytes --]

BCC: lkp@intel.com
CC: oe-kbuild-all@lists.linux.dev
In-Reply-To: <20221104231927.9613-4-michael.christie@oracle.com>
References: <20221104231927.9613-4-michael.christie@oracle.com>
TO: Mike Christie <michael.christie@oracle.com>
TO: bvanassche@acm.org
TO: mwilck@suse.com
TO: hch@lst.de
TO: martin.petersen@oracle.com
TO: linux-scsi@vger.kernel.org
TO: james.bottomley@hansenpartnership.com
CC: Mike Christie <michael.christie@oracle.com>

Hi Mike,

I love your patch! Perhaps something to improve:

[auto build test WARNING on mkp-scsi/for-next]
[also build test WARNING on jejb-scsi/for-next groeck-staging/hwmon-next linus/master v6.1-rc3 next-20221104]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Mike-Christie/Allow-scsi_execute-users-to-control-retries/20221105-072653
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git for-next
patch link:    https://lore.kernel.org/r/20221104231927.9613-4-michael.christie%40oracle.com
patch subject: [PATCH v6 03/35] scsi: Add struct for args to execution functions
:::::: branch date: 13 hours ago
:::::: commit date: 13 hours ago
config: ia64-randconfig-m031-20221104
compiler: ia64-linux-gcc (GCC) 12.1.0

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Reported-by: Dan Carpenter <dan.carpenter@oracle.com>

smatch warnings:
drivers/scsi/scsi_scan.c:707 scsi_probe_lun() error: uninitialized symbol 'resid'.

vim +/resid +707 drivers/scsi/scsi_scan.c

e5b3cd42960a10 Alan Stern         2006-08-21  629  
^1da177e4c3f41 Linus Torvalds     2005-04-16  630  /**
^1da177e4c3f41 Linus Torvalds     2005-04-16  631   * scsi_probe_lun - probe a single LUN using a SCSI INQUIRY
392160335c798b James Bottomley    2005-06-15  632   * @sdev:	scsi_device to probe
^1da177e4c3f41 Linus Torvalds     2005-04-16  633   * @inq_result:	area to store the INQUIRY result
392160335c798b James Bottomley    2005-06-15  634   * @result_len: len of inq_result
^1da177e4c3f41 Linus Torvalds     2005-04-16  635   * @bflags:	store any bflags found here
^1da177e4c3f41 Linus Torvalds     2005-04-16  636   *
^1da177e4c3f41 Linus Torvalds     2005-04-16  637   * Description:
392160335c798b James Bottomley    2005-06-15  638   *     Probe the lun associated with @req using a standard SCSI INQUIRY;
^1da177e4c3f41 Linus Torvalds     2005-04-16  639   *
392160335c798b James Bottomley    2005-06-15  640   *     If the INQUIRY is successful, zero is returned and the
^1da177e4c3f41 Linus Torvalds     2005-04-16  641   *     INQUIRY data is in @inq_result; the scsi_level and INQUIRY length
f64a181d898e05 Christoph Hellwig  2005-10-31  642   *     are copied to the scsi_device any flags value is stored in *@bflags.
^1da177e4c3f41 Linus Torvalds     2005-04-16  643   **/
e5b3cd42960a10 Alan Stern         2006-08-21  644  static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
5ebde4694e3b57 Hannes Reinecke    2017-11-15  645  			  int result_len, blist_flags_t *bflags)
^1da177e4c3f41 Linus Torvalds     2005-04-16  646  {
^1da177e4c3f41 Linus Torvalds     2005-04-16  647  	unsigned char scsi_cmd[MAX_COMMAND_SIZE];
^1da177e4c3f41 Linus Torvalds     2005-04-16  648  	int first_inquiry_len, try_inquiry_len, next_inquiry_len;
^1da177e4c3f41 Linus Torvalds     2005-04-16  649  	int response_len = 0;
392160335c798b James Bottomley    2005-06-15  650  	int pass, count, result;
^1da177e4c3f41 Linus Torvalds     2005-04-16  651  	struct scsi_sense_hdr sshdr;
^1da177e4c3f41 Linus Torvalds     2005-04-16  652  
^1da177e4c3f41 Linus Torvalds     2005-04-16  653  	*bflags = 0;
^1da177e4c3f41 Linus Torvalds     2005-04-16  654  
^1da177e4c3f41 Linus Torvalds     2005-04-16  655  	/* Perform up to 3 passes.  The first pass uses a conservative
^1da177e4c3f41 Linus Torvalds     2005-04-16  656  	 * transfer length of 36 unless sdev->inquiry_len specifies a
^1da177e4c3f41 Linus Torvalds     2005-04-16  657  	 * different value. */
^1da177e4c3f41 Linus Torvalds     2005-04-16  658  	first_inquiry_len = sdev->inquiry_len ? sdev->inquiry_len : 36;
^1da177e4c3f41 Linus Torvalds     2005-04-16  659  	try_inquiry_len = first_inquiry_len;
^1da177e4c3f41 Linus Torvalds     2005-04-16  660  	pass = 1;
^1da177e4c3f41 Linus Torvalds     2005-04-16  661  
^1da177e4c3f41 Linus Torvalds     2005-04-16  662   next_pass:
9ccfc756a70d45 James Bottomley    2005-10-02  663  	SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
9ccfc756a70d45 James Bottomley    2005-10-02  664  				"scsi scan: INQUIRY pass %d length %d\n",
9ccfc756a70d45 James Bottomley    2005-10-02  665  				pass, try_inquiry_len));
^1da177e4c3f41 Linus Torvalds     2005-04-16  666  
^1da177e4c3f41 Linus Torvalds     2005-04-16  667  	/* Each pass gets up to three chances to ignore Unit Attention */
^1da177e4c3f41 Linus Torvalds     2005-04-16  668  	for (count = 0; count < 3; ++count) {
5cd3bbfad088f8 FUJITA Tomonori    2008-12-05  669  		int resid;
5cd3bbfad088f8 FUJITA Tomonori    2008-12-05  670  
^1da177e4c3f41 Linus Torvalds     2005-04-16  671  		memset(scsi_cmd, 0, 6);
^1da177e4c3f41 Linus Torvalds     2005-04-16  672  		scsi_cmd[0] = INQUIRY;
^1da177e4c3f41 Linus Torvalds     2005-04-16  673  		scsi_cmd[4] = (unsigned char) try_inquiry_len;
^1da177e4c3f41 Linus Torvalds     2005-04-16  674  
^1da177e4c3f41 Linus Torvalds     2005-04-16  675  		memset(inq_result, 0, try_inquiry_len);
392160335c798b James Bottomley    2005-06-15  676  
392160335c798b James Bottomley    2005-06-15  677  		result = scsi_execute_req(sdev,  scsi_cmd, DMA_FROM_DEVICE,
ea73a9f23906c3 James Bottomley    2005-08-28  678  					  inq_result, try_inquiry_len, &sshdr,
f4f4e47e4af6b0 FUJITA Tomonori    2008-12-04  679  					  HZ / 2 + HZ * scsi_inq_timeout, 3,
5cd3bbfad088f8 FUJITA Tomonori    2008-12-05  680  					  &resid);
^1da177e4c3f41 Linus Torvalds     2005-04-16  681  
91921e016a2199 Hannes Reinecke    2014-06-25  682  		SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
91921e016a2199 Hannes Reinecke    2014-06-25  683  				"scsi scan: INQUIRY %s with code 0x%x\n",
392160335c798b James Bottomley    2005-06-15  684  				result ? "failed" : "successful", result));
^1da177e4c3f41 Linus Torvalds     2005-04-16  685  
ced202f7bd78eb Hannes Reinecke    2021-04-27  686  		if (result > 0) {
^1da177e4c3f41 Linus Torvalds     2005-04-16  687  			/*
^1da177e4c3f41 Linus Torvalds     2005-04-16  688  			 * not-ready to ready transition [asc/ascq=0x28/0x0]
^1da177e4c3f41 Linus Torvalds     2005-04-16  689  			 * or power-on, reset [asc/ascq=0x29/0x0], continue.
^1da177e4c3f41 Linus Torvalds     2005-04-16  690  			 * INQUIRY should not yield UNIT_ATTENTION
^1da177e4c3f41 Linus Torvalds     2005-04-16  691  			 * but many buggy devices do so anyway. 
^1da177e4c3f41 Linus Torvalds     2005-04-16  692  			 */
464a00c9e0ad45 Hannes Reinecke    2021-04-27  693  			if (scsi_status_is_check_condition(result) &&
ea73a9f23906c3 James Bottomley    2005-08-28  694  			    scsi_sense_valid(&sshdr)) {
^1da177e4c3f41 Linus Torvalds     2005-04-16  695  				if ((sshdr.sense_key == UNIT_ATTENTION) &&
^1da177e4c3f41 Linus Torvalds     2005-04-16  696  				    ((sshdr.asc == 0x28) ||
^1da177e4c3f41 Linus Torvalds     2005-04-16  697  				     (sshdr.asc == 0x29)) &&
^1da177e4c3f41 Linus Torvalds     2005-04-16  698  				    (sshdr.ascq == 0))
^1da177e4c3f41 Linus Torvalds     2005-04-16  699  					continue;
^1da177e4c3f41 Linus Torvalds     2005-04-16  700  			}
ced202f7bd78eb Hannes Reinecke    2021-04-27  701  		} else if (result == 0) {
5cd3bbfad088f8 FUJITA Tomonori    2008-12-05  702  			/*
5cd3bbfad088f8 FUJITA Tomonori    2008-12-05  703  			 * if nothing was transferred, we try
5cd3bbfad088f8 FUJITA Tomonori    2008-12-05  704  			 * again. It's a workaround for some USB
5cd3bbfad088f8 FUJITA Tomonori    2008-12-05  705  			 * devices.
5cd3bbfad088f8 FUJITA Tomonori    2008-12-05  706  			 */
5cd3bbfad088f8 FUJITA Tomonori    2008-12-05 @707  			if (resid == try_inquiry_len)
5cd3bbfad088f8 FUJITA Tomonori    2008-12-05  708  				continue;
^1da177e4c3f41 Linus Torvalds     2005-04-16  709  		}
^1da177e4c3f41 Linus Torvalds     2005-04-16  710  		break;
^1da177e4c3f41 Linus Torvalds     2005-04-16  711  	}
^1da177e4c3f41 Linus Torvalds     2005-04-16  712  
392160335c798b James Bottomley    2005-06-15  713  	if (result == 0) {
3846470a1bd4ea Don Brace          2016-01-27  714  		scsi_sanitize_inquiry_string(&inq_result[8], 8);
3846470a1bd4ea Don Brace          2016-01-27  715  		scsi_sanitize_inquiry_string(&inq_result[16], 16);
3846470a1bd4ea Don Brace          2016-01-27  716  		scsi_sanitize_inquiry_string(&inq_result[32], 4);
e5b3cd42960a10 Alan Stern         2006-08-21  717  
e5b3cd42960a10 Alan Stern         2006-08-21  718  		response_len = inq_result[4] + 5;
^1da177e4c3f41 Linus Torvalds     2005-04-16  719  		if (response_len > 255)
^1da177e4c3f41 Linus Torvalds     2005-04-16  720  			response_len = first_inquiry_len;	/* sanity */
^1da177e4c3f41 Linus Torvalds     2005-04-16  721  
^1da177e4c3f41 Linus Torvalds     2005-04-16  722  		/*
^1da177e4c3f41 Linus Torvalds     2005-04-16  723  		 * Get any flags for this device.
^1da177e4c3f41 Linus Torvalds     2005-04-16  724  		 *
f64a181d898e05 Christoph Hellwig  2005-10-31  725  		 * XXX add a bflags to scsi_device, and replace the
f64a181d898e05 Christoph Hellwig  2005-10-31  726  		 * corresponding bit fields in scsi_device, so bflags
^1da177e4c3f41 Linus Torvalds     2005-04-16  727  		 * need not be passed as an argument.
^1da177e4c3f41 Linus Torvalds     2005-04-16  728  		 */
^1da177e4c3f41 Linus Torvalds     2005-04-16  729  		*bflags = scsi_get_device_flags(sdev, &inq_result[8],
^1da177e4c3f41 Linus Torvalds     2005-04-16  730  				&inq_result[16]);
^1da177e4c3f41 Linus Torvalds     2005-04-16  731  
^1da177e4c3f41 Linus Torvalds     2005-04-16  732  		/* When the first pass succeeds we gain information about
^1da177e4c3f41 Linus Torvalds     2005-04-16  733  		 * what larger transfer lengths might work. */
^1da177e4c3f41 Linus Torvalds     2005-04-16  734  		if (pass == 1) {
^1da177e4c3f41 Linus Torvalds     2005-04-16  735  			if (BLIST_INQUIRY_36 & *bflags)
^1da177e4c3f41 Linus Torvalds     2005-04-16  736  				next_inquiry_len = 36;
d657700ccac71d Martin K. Petersen 2022-03-02  737  			/*
d657700ccac71d Martin K. Petersen 2022-03-02  738  			 * LLD specified a maximum sdev->inquiry_len
d657700ccac71d Martin K. Petersen 2022-03-02  739  			 * but device claims it has more data. Capping
d657700ccac71d Martin K. Petersen 2022-03-02  740  			 * the length only makes sense for legacy
d657700ccac71d Martin K. Petersen 2022-03-02  741  			 * devices. If a device supports SPC-4 (2014)
d657700ccac71d Martin K. Petersen 2022-03-02  742  			 * or newer, assume that it is safe to ask for
d657700ccac71d Martin K. Petersen 2022-03-02  743  			 * as much as the device says it supports.
d657700ccac71d Martin K. Petersen 2022-03-02  744  			 */
d657700ccac71d Martin K. Petersen 2022-03-02  745  			else if (sdev->inquiry_len &&
d657700ccac71d Martin K. Petersen 2022-03-02  746  				 response_len > sdev->inquiry_len &&
d657700ccac71d Martin K. Petersen 2022-03-02  747  				 (inq_result[2] & 0x7) < 6) /* SPC-4 */
^1da177e4c3f41 Linus Torvalds     2005-04-16  748  				next_inquiry_len = sdev->inquiry_len;
^1da177e4c3f41 Linus Torvalds     2005-04-16  749  			else
^1da177e4c3f41 Linus Torvalds     2005-04-16  750  				next_inquiry_len = response_len;
^1da177e4c3f41 Linus Torvalds     2005-04-16  751  
^1da177e4c3f41 Linus Torvalds     2005-04-16  752  			/* If more data is available perform the second pass */
^1da177e4c3f41 Linus Torvalds     2005-04-16  753  			if (next_inquiry_len > try_inquiry_len) {
^1da177e4c3f41 Linus Torvalds     2005-04-16  754  				try_inquiry_len = next_inquiry_len;
^1da177e4c3f41 Linus Torvalds     2005-04-16  755  				pass = 2;
^1da177e4c3f41 Linus Torvalds     2005-04-16  756  				goto next_pass;
^1da177e4c3f41 Linus Torvalds     2005-04-16  757  			}
^1da177e4c3f41 Linus Torvalds     2005-04-16  758  		}
^1da177e4c3f41 Linus Torvalds     2005-04-16  759  
^1da177e4c3f41 Linus Torvalds     2005-04-16  760  	} else if (pass == 2) {
91921e016a2199 Hannes Reinecke    2014-06-25  761  		sdev_printk(KERN_INFO, sdev,
91921e016a2199 Hannes Reinecke    2014-06-25  762  			    "scsi scan: %d byte inquiry failed.  "
^1da177e4c3f41 Linus Torvalds     2005-04-16  763  			    "Consider BLIST_INQUIRY_36 for this device\n",
^1da177e4c3f41 Linus Torvalds     2005-04-16  764  			    try_inquiry_len);
^1da177e4c3f41 Linus Torvalds     2005-04-16  765  
^1da177e4c3f41 Linus Torvalds     2005-04-16  766  		/* If this pass failed, the third pass goes back and transfers
^1da177e4c3f41 Linus Torvalds     2005-04-16  767  		 * the same amount as we successfully got in the first pass. */
^1da177e4c3f41 Linus Torvalds     2005-04-16  768  		try_inquiry_len = first_inquiry_len;
^1da177e4c3f41 Linus Torvalds     2005-04-16  769  		pass = 3;
^1da177e4c3f41 Linus Torvalds     2005-04-16  770  		goto next_pass;
^1da177e4c3f41 Linus Torvalds     2005-04-16  771  	}
^1da177e4c3f41 Linus Torvalds     2005-04-16  772  
^1da177e4c3f41 Linus Torvalds     2005-04-16  773  	/* If the last transfer attempt got an error, assume the
^1da177e4c3f41 Linus Torvalds     2005-04-16  774  	 * peripheral doesn't exist or is dead. */
392160335c798b James Bottomley    2005-06-15  775  	if (result)
392160335c798b James Bottomley    2005-06-15  776  		return -EIO;
^1da177e4c3f41 Linus Torvalds     2005-04-16  777  
^1da177e4c3f41 Linus Torvalds     2005-04-16  778  	/* Don't report any more data than the device says is valid */
^1da177e4c3f41 Linus Torvalds     2005-04-16  779  	sdev->inquiry_len = min(try_inquiry_len, response_len);
^1da177e4c3f41 Linus Torvalds     2005-04-16  780  
^1da177e4c3f41 Linus Torvalds     2005-04-16  781  	/*
^1da177e4c3f41 Linus Torvalds     2005-04-16  782  	 * XXX Abort if the response length is less than 36? If less than
^1da177e4c3f41 Linus Torvalds     2005-04-16  783  	 * 32, the lookup of the device flags (above) could be invalid,
^1da177e4c3f41 Linus Torvalds     2005-04-16  784  	 * and it would be possible to take an incorrect action - we do
^1da177e4c3f41 Linus Torvalds     2005-04-16  785  	 * not want to hang because of a short INQUIRY. On the flip side,
^1da177e4c3f41 Linus Torvalds     2005-04-16  786  	 * if the device is spun down or becoming ready (and so it gives a
^1da177e4c3f41 Linus Torvalds     2005-04-16  787  	 * short INQUIRY), an abort here prevents any further use of the
^1da177e4c3f41 Linus Torvalds     2005-04-16  788  	 * device, including spin up.
^1da177e4c3f41 Linus Torvalds     2005-04-16  789  	 *
e423ee31db92d4 Alan Stern         2007-02-16  790  	 * On the whole, the best approach seems to be to assume the first
e423ee31db92d4 Alan Stern         2007-02-16  791  	 * 36 bytes are valid no matter what the device says.  That's
e423ee31db92d4 Alan Stern         2007-02-16  792  	 * better than copying < 36 bytes to the inquiry-result buffer
e423ee31db92d4 Alan Stern         2007-02-16  793  	 * and displaying garbage for the Vendor, Product, or Revision
e423ee31db92d4 Alan Stern         2007-02-16  794  	 * strings.
e423ee31db92d4 Alan Stern         2007-02-16  795  	 */
e423ee31db92d4 Alan Stern         2007-02-16  796  	if (sdev->inquiry_len < 36) {
a35bb4458e5e5c Vitaly Kuznetsov   2015-11-19  797  		if (!sdev->host->short_inquiry) {
a35bb4458e5e5c Vitaly Kuznetsov   2015-11-19  798  			shost_printk(KERN_INFO, sdev->host,
91921e016a2199 Hannes Reinecke    2014-06-25  799  				    "scsi scan: INQUIRY result too short (%d),"
e423ee31db92d4 Alan Stern         2007-02-16  800  				    " using 36\n", sdev->inquiry_len);
a35bb4458e5e5c Vitaly Kuznetsov   2015-11-19  801  			sdev->host->short_inquiry = 1;
a35bb4458e5e5c Vitaly Kuznetsov   2015-11-19  802  		}
e423ee31db92d4 Alan Stern         2007-02-16  803  		sdev->inquiry_len = 36;
e423ee31db92d4 Alan Stern         2007-02-16  804  	}
e423ee31db92d4 Alan Stern         2007-02-16  805  
e423ee31db92d4 Alan Stern         2007-02-16  806  	/*
^1da177e4c3f41 Linus Torvalds     2005-04-16  807  	 * Related to the above issue:
^1da177e4c3f41 Linus Torvalds     2005-04-16  808  	 *
^1da177e4c3f41 Linus Torvalds     2005-04-16  809  	 * XXX Devices (disk or all?) should be sent a TEST UNIT READY,
^1da177e4c3f41 Linus Torvalds     2005-04-16  810  	 * and if not ready, sent a START_STOP to start (maybe spin up) and
^1da177e4c3f41 Linus Torvalds     2005-04-16  811  	 * then send the INQUIRY again, since the INQUIRY can change after
^1da177e4c3f41 Linus Torvalds     2005-04-16  812  	 * a device is initialized.
^1da177e4c3f41 Linus Torvalds     2005-04-16  813  	 *
^1da177e4c3f41 Linus Torvalds     2005-04-16  814  	 * Ideally, start a device if explicitly asked to do so.  This
^1da177e4c3f41 Linus Torvalds     2005-04-16  815  	 * assumes that a device is spun up on power on, spun down on
^1da177e4c3f41 Linus Torvalds     2005-04-16  816  	 * request, and then spun up on request.
^1da177e4c3f41 Linus Torvalds     2005-04-16  817  	 */
^1da177e4c3f41 Linus Torvalds     2005-04-16  818  
^1da177e4c3f41 Linus Torvalds     2005-04-16  819  	/*
^1da177e4c3f41 Linus Torvalds     2005-04-16  820  	 * The scanning code needs to know the scsi_level, even if no
^1da177e4c3f41 Linus Torvalds     2005-04-16  821  	 * device is attached at LUN 0 (SCSI_SCAN_TARGET_PRESENT) so
^1da177e4c3f41 Linus Torvalds     2005-04-16  822  	 * non-zero LUNs can be scanned.
^1da177e4c3f41 Linus Torvalds     2005-04-16  823  	 */
^1da177e4c3f41 Linus Torvalds     2005-04-16  824  	sdev->scsi_level = inq_result[2] & 0x07;
^1da177e4c3f41 Linus Torvalds     2005-04-16  825  	if (sdev->scsi_level >= 2 ||
^1da177e4c3f41 Linus Torvalds     2005-04-16  826  	    (sdev->scsi_level == 1 && (inq_result[3] & 0x0f) == 1))
^1da177e4c3f41 Linus Torvalds     2005-04-16  827  		sdev->scsi_level++;
6f3a20242db259 James Bottomley    2005-09-22  828  	sdev->sdev_target->scsi_level = sdev->scsi_level;
^1da177e4c3f41 Linus Torvalds     2005-04-16  829  
50c4e96411a6cd Alan Stern         2014-09-02  830  	/*
50c4e96411a6cd Alan Stern         2014-09-02  831  	 * If SCSI-2 or lower, and if the transport requires it,
50c4e96411a6cd Alan Stern         2014-09-02  832  	 * store the LUN value in CDB[1].
50c4e96411a6cd Alan Stern         2014-09-02  833  	 */
50c4e96411a6cd Alan Stern         2014-09-02  834  	sdev->lun_in_cdb = 0;
50c4e96411a6cd Alan Stern         2014-09-02  835  	if (sdev->scsi_level <= SCSI_2 &&
50c4e96411a6cd Alan Stern         2014-09-02  836  	    sdev->scsi_level != SCSI_UNKNOWN &&
50c4e96411a6cd Alan Stern         2014-09-02  837  	    !sdev->host->no_scsi2_lun_in_cdb)
50c4e96411a6cd Alan Stern         2014-09-02  838  		sdev->lun_in_cdb = 1;
50c4e96411a6cd Alan Stern         2014-09-02  839  
392160335c798b James Bottomley    2005-06-15  840  	return 0;
^1da177e4c3f41 Linus Torvalds     2005-04-16  841  }
^1da177e4c3f41 Linus Torvalds     2005-04-16  842  

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 131807 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/ia64 6.1.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="ia64-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_WATCH_QUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_USELIB=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_LEGACY=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_LEGACY_TIMER_TICK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
CONFIG_BPF=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=m
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_MISC is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN=y
# CONFIG_EXPERT is not set
CONFIG_MULTIUSER=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KCMP=y
# CONFIG_EMBEDDED is not set

#
# Kernel Performance Events And Counters
#
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
# end of General setup

CONFIG_PGTABLE_LEVELS=3

#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_AUDIT_ARCH=y
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
CONFIG_IA64_PAGE_SIZE_8KB=y
# CONFIG_IA64_PAGE_SIZE_16KB is not set
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_IA64_L1_CACHE_SHIFT=7
# CONFIG_IA64_SGI_UV is not set
# CONFIG_IA64_HP_SBA_IOMMU is not set
# CONFIG_IA64_CYCLONE is not set
CONFIG_ARCH_FORCE_MAX_ORDER=11
CONFIG_SMP=y
CONFIG_NR_CPUS=4096
CONFIG_HOTPLUG_CPU=y
# CONFIG_SCHED_SMT is not set
CONFIG_PERMIT_BSP_REMOVE=y
CONFIG_FORCE_CPEI_RETARGET=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
CONFIG_HAVE_MEMORYLESS_NODES=y
# CONFIG_IA64_MCA_RECOVERY is not set
CONFIG_IA64_PALINFO=y
CONFIG_IA64_MC_ERR_INJECT=y
# CONFIG_IA64_ESI is not set
# CONFIG_IA64_HP_AML_NFW is not set
CONFIG_KEXEC=y
# end of Processor type and features

#
# Power management and ACPI options
#
# CONFIG_PM is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_TABLE_LIB=y
CONFIG_ACPI_DEBUGGER=y
CONFIG_ACPI_DEBUGGER_USER=y
# CONFIG_ACPI_SPCR_TABLE is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_THERMAL is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
# CONFIG_ACPI_HED is not set
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not set
CONFIG_ACPI_CONFIGFS=y
# CONFIG_ACPI_PFRUT is not set
# CONFIG_PMIC_OPREGION is not set
# end of Power management and ACPI options

CONFIG_MSPEC=m

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KPROBES=y
CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_FUNCTION_DESCRIPTORS=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_TASK_STRUCT_ON_STACK=y
CONFIG_ARCH_TASK_STRUCT_ALLOCATOR=y
CONFIG_ARCH_THREAD_STACK_ALLOCATOR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_LOCK_EVENT_COUNTS=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# end of GCOV-based kernel profiling
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
# CONFIG_MODULE_COMPRESS_NONE is not set
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
CONFIG_MODULE_COMPRESS_ZSTD=y
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_BLOCK=y
# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=m
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_FC_APPID is not set
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_CGROUP_IOPRIO=y
# CONFIG_BLK_DEBUG_FS is not set
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=m
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_BINFMT_SCRIPT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
# CONFIG_SWAP is not set
CONFIG_ZSMALLOC=m
# CONFIG_ZSMALLOC_STAT is not set

#
# SLAB allocator options
#
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PAGE_REPORTING is not set
# CONFIG_MIGRATION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_CMA is not set
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ZONE_DMA32=y
CONFIG_GET_FREE_REGION=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_TEST is not set
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
CONFIG_LRU_GEN=y
# CONFIG_LRU_GEN_ENABLED is not set
# CONFIG_LRU_GEN_STATS is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

# CONFIG_NET is not set

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEFAULT is not set
CONFIG_PCIEASPM_POWERSAVE=y
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PTM=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_PF_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# PCI controller drivers
#
# CONFIG_PCIE_XILINX_NWL is not set
# CONFIG_PCI_TEGRA is not set
# CONFIG_PCIE_RCAR_HOST is not set
# CONFIG_PCIE_XILINX is not set
# CONFIG_PCIE_XILINX_CPM is not set
# CONFIG_PCI_XGENE is not set
# CONFIG_PCI_VERSATILE is not set
# CONFIG_PCIE_ALTERA is not set
# CONFIG_PCI_HOST_THUNDER_PEM is not set
# CONFIG_PCI_HOST_THUNDER_ECAM is not set
# CONFIG_PCIE_MEDIATEK_GEN3 is not set
# CONFIG_PCI_LOONGSON is not set
# CONFIG_PCIE_MT7621 is not set

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
# CONFIG_PCI_EXYNOS is not set
# CONFIG_PCI_IMX6 is not set
# CONFIG_PCIE_SPEAR13XX is not set
# CONFIG_PCI_KEYSTONE_HOST is not set
# CONFIG_PCIE_ARMADA_8K is not set
# CONFIG_PCIE_ARTPEC6_HOST is not set
# CONFIG_PCIE_KEEMBAY_HOST is not set
# CONFIG_PCIE_HISI_STB is not set
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_TEGRA194_HOST is not set
# CONFIG_PCIE_VISCONTI_HOST is not set
# CONFIG_PCIE_FU740 is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers

CONFIG_CXL_BUS=m
CONFIG_CXL_PCI=m
CONFIG_CXL_MEM_RAW_COMMANDS=y
CONFIG_CXL_ACPI=m
# CONFIG_CXL_PMEM is not set
CONFIG_CXL_MEM=m
CONFIG_CXL_PORT=m
CONFIG_CXL_REGION=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=m
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=m
CONFIG_RAPIDIO_CHMAN=y
CONFIG_RAPIDIO_MPORT_CDEV=y

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=y
# CONFIG_RAPIDIO_CPS_GEN2 is not set
CONFIG_RAPIDIO_RXS_GEN3=y
# end of RapidIO Switch drivers

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_DEVTMPFS_SAFE=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
CONFIG_FW_UPLOAD=y
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=m
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SCCB=m
CONFIG_REGMAP_I3C=m
CONFIG_REGMAP_SPI_AVMM=m
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_MHI_BUS is not set
CONFIG_MHI_BUS_EP=y
# end of Bus devices

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
# end of ARM System Control and Management Interface Protocol

# CONFIG_ARM_SCPI_PROTOCOL is not set
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_BCM47XX_NVRAM is not set
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=m
CONFIG_GOOGLE_MEMCONSOLE=m
CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT=m
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=m
CONFIG_GOOGLE_VPD=m

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_BOOTLOADER_CONTROL=y
CONFIG_EFI_TEST=m
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
CONFIG_EFI_COCO_SECRET=y
# end of EFI (Extensible Firmware Interface) Support

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=m
# CONFIG_MTD_BCM63XX_PARTS is not set
# CONFIG_MTD_BRCM_U_BOOT is not set
CONFIG_MTD_CMDLINE_PARTS=m
# CONFIG_MTD_PARSER_IMAGETAG is not set
# CONFIG_MTD_PARSER_TRX is not set
# CONFIG_MTD_SHARPSL_PARTS is not set
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
CONFIG_INFTL=m
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
CONFIG_MTD_CFI_LE_BYTE_SWAP=y
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_OTP=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_PCI=m
# CONFIG_MTD_PCMCIA is not set
CONFIG_MTD_INTEL_VR_NOR=m
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_MCHP23K256 is not set
CONFIG_MTD_MCHP48L640=m
CONFIG_MTD_SPEAR_SMI=m
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=m
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=m
# CONFIG_MTD_ONENAND_SAMSUNG is not set
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_RAW_NAND=m

#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=m
CONFIG_MTD_NAND_DENALI_PCI=m
CONFIG_MTD_NAND_AMS_DELTA=m
# CONFIG_MTD_NAND_SHARPSL is not set
CONFIG_MTD_NAND_CAFE=m
# CONFIG_MTD_NAND_ATMEL is not set
# CONFIG_MTD_NAND_MARVELL is not set
# CONFIG_MTD_NAND_SLC_LPC32XX is not set
# CONFIG_MTD_NAND_MLC_LPC32XX is not set
# CONFIG_MTD_NAND_BRCMNAND is not set
# CONFIG_MTD_NAND_OXNAS is not set
# CONFIG_MTD_NAND_FSL_IFC is not set
# CONFIG_MTD_NAND_VF610_NFC is not set
# CONFIG_MTD_NAND_SH_FLCTL is not set
# CONFIG_MTD_NAND_DAVINCI is not set
# CONFIG_MTD_NAND_TXX9NDFMC is not set
# CONFIG_MTD_NAND_SUNXI is not set
# CONFIG_MTD_NAND_HISI504 is not set
# CONFIG_MTD_NAND_QCOM is not set
CONFIG_MTD_NAND_MXIC=m
# CONFIG_MTD_NAND_TEGRA is not set
# CONFIG_MTD_NAND_STM32_FMC2 is not set
# CONFIG_MTD_NAND_MESON is not set
CONFIG_MTD_NAND_GPIO=m
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_CADENCE is not set
CONFIG_MTD_NAND_ARASAN=m
# CONFIG_MTD_NAND_INTEL_LGM is not set
# CONFIG_MTD_NAND_RENESAS is not set

#
# Misc
#
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_RICOH is not set
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_SPI_NAND=m

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
# CONFIG_MTD_NAND_ECC_MXIC is not set
# CONFIG_MTD_NAND_ECC_MEDIATEK is not set
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_SPI_NOR=m
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
# CONFIG_SPI_HISI_SFC is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_HYPERBUS=m
# CONFIG_HBMC_AM654 is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_CDROM=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
CONFIG_ZRAM_DEF_COMP_LZ4=y
# CONFIG_ZRAM_DEF_COMP_842 is not set
CONFIG_ZRAM_DEF_COMP="lz4"
CONFIG_ZRAM_WRITEBACK=y
# CONFIG_ZRAM_MEMORY_TRACKING is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS or INET not selected
#
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=m
CONFIG_NVME_FC=m
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_PASSTHRU=y
# CONFIG_NVME_TARGET_LOOP is not set
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=y
CONFIG_PHANTOM=m
CONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not set
CONFIG_ICS932S401=y
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_GEHC_ACHC is not set
# CONFIG_HP_ILO is not set
# CONFIG_QCOM_COINCELL is not set
# CONFIG_QCOM_FASTRPC is not set
CONFIG_APDS9802ALS=m
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
# CONFIG_PCH_PHUB is not set
CONFIG_LATTICE_ECP3_CONFIG=m
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
CONFIG_XILINX_SDFEC=m
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_EEPROM_EE1004=y
# end of EEPROM support

CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=m
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=m
# CONFIG_BCM_VK is not set
CONFIG_MISC_ALCOR_PCI=m
# CONFIG_MISC_RTSX_PCI is not set
CONFIG_HABANA_AI=m
CONFIG_UACCE=y
# CONFIG_PVPANIC is not set
# CONFIG_GP_PCI1XXXX is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
# CONFIG_SCSI_DH_ALUA is not set
# end of SCSI device support

CONFIG_ATA=m
CONFIG_ATA_NONSTANDARD=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_AHCI_BRCM is not set
# CONFIG_AHCI_DA850 is not set
# CONFIG_AHCI_DM816 is not set
CONFIG_AHCI_DWC=m
# CONFIG_AHCI_ST is not set
# CONFIG_AHCI_IMX is not set
# CONFIG_AHCI_MTK is not set
# CONFIG_AHCI_MVEBU is not set
# CONFIG_AHCI_SUNXI is not set
# CONFIG_AHCI_TEGRA is not set
# CONFIG_AHCI_XGENE is not set
# CONFIG_SATA_FSL is not set
# CONFIG_SATA_AHCI_SEATTLE is not set
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=y
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
# CONFIG_BCACHE_ASYNC_REGISTRATION is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_UNSTRIPED=m
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
CONFIG_DM_EBS=m
CONFIG_DM_ERA=m
CONFIG_DM_CLONE=m
# CONFIG_DM_MIRROR is not set
CONFIG_DM_RAID=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_DUST=m
# CONFIG_DM_UEVENT is not set
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
# CONFIG_DM_VERITY_FEC is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_DM_ZONED is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_CYAPA=y
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADC=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_232=m
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=m
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_PSXPAD_SPI=m
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_JOYSTICK_QWIIC=m
CONFIG_JOYSTICK_FSIA6B=y
CONFIG_JOYSTICK_SENSEHAT=y
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_AD7877 is not set
CONFIG_TOUCHSCREEN_AD7879=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_ADC=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_BU21029=m
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
CONFIG_TOUCHSCREEN_CY8CTMA140=y
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP_SPI=m
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
CONFIG_TOUCHSCREEN_EXC3000=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GOODIX=m
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
CONFIG_TOUCHSCREEN_ILITEK=y
# CONFIG_TOUCHSCREEN_IPROC is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MSG2638=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_IMAGIS=m
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_RASPBERRYPI_FW is not set
# CONFIG_TOUCHSCREEN_MIGOR is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
CONFIG_TOUCHSCREEN_WM831X=m
CONFIG_TOUCHSCREEN_WM97XX=y
# CONFIG_TOUCHSCREEN_WM9705 is not set
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
# CONFIG_TOUCHSCREEN_MC13783 is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
# CONFIG_TOUCHSCREEN_TSC2004 is not set
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_PCAP is not set
CONFIG_TOUCHSCREEN_RM_TS=y
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=m
CONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUN4I is not set
CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
CONFIG_TOUCHSCREEN_SX8654=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_TOUCHSCREEN_ZET6223=y
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
# CONFIG_TOUCHSCREEN_IQS5XX is not set
CONFIG_TOUCHSCREEN_ZINITIX=m
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM80X_ONKEY is not set
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_AD714X_SPI=m
# CONFIG_INPUT_ARIEL_PWRBUTTON is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_E3X0_BUTTON=y
CONFIG_INPUT_MAX77693_HAPTIC=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
# CONFIG_INPUT_GPIO_BEEPER is not set
CONFIG_INPUT_GPIO_DECODER=m
# CONFIG_INPUT_GPIO_VIBRA is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
CONFIG_INPUT_TWL4030_VIBRA=m
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_PWM_BEEPER=y
CONFIG_INPUT_PWM_VIBRA=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_DA9052_ONKEY is not set
CONFIG_INPUT_DA9055_ONKEY=m
CONFIG_INPUT_WM831X_ON=m
CONFIG_INPUT_PCAP=m
CONFIG_INPUT_ADXL34X=m
# CONFIG_INPUT_ADXL34X_I2C is not set
CONFIG_INPUT_ADXL34X_SPI=m
# CONFIG_INPUT_IBM_PANEL is not set
CONFIG_INPUT_IQS269A=m
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
CONFIG_INPUT_CMA3000=y
# CONFIG_INPUT_CMA3000_I2C is not set
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=y
CONFIG_INPUT_DRV2667_HAPTICS=m
# CONFIG_INPUT_HISI_POWERKEY is not set
CONFIG_INPUT_RAVE_SP_PWRBUTTON=m
# CONFIG_INPUT_SC27XX_VIBRA is not set
# CONFIG_INPUT_RT5120_PWRKEY is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_SUN4I_PS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LDISC_AUTOLOAD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_EXAR=m
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_MEN_MCB=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_DWLIB=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set
# CONFIG_SERIAL_8250_IOC3 is not set
CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SERIAL_8250_OMAP is not set
# CONFIG_SERIAL_8250_MT6577 is not set
# CONFIG_SERIAL_8250_UNIPHIER is not set
CONFIG_SERIAL_8250_LPSS=m
CONFIG_SERIAL_8250_MID=m
# CONFIG_SERIAL_8250_PERICOM is not set
# CONFIG_SERIAL_8250_PXA is not set
CONFIG_SERIAL_8250_TEGRA=m
# CONFIG_SERIAL_8250_BCM7271 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_ATMEL is not set
# CONFIG_SERIAL_MESON is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_SAMSUNG is not set
# CONFIG_SERIAL_TEGRA is not set
# CONFIG_SERIAL_TEGRA_TCU is not set
CONFIG_SERIAL_MAX3100=m
CONFIG_SERIAL_MAX310X=m
# CONFIG_SERIAL_IMX is not set
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_SH_SCI is not set
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_ICOM is not set
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_MSM is not set
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_SCCNXP=m
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_MXS_AUART is not set
# CONFIG_SERIAL_MPS2_UART is not set
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_MEN_Z135 is not set
CONFIG_SERIAL_SPRD=y
# CONFIG_SERIAL_SPRD_CONSOLE is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_MVEBU_UART is not set
# CONFIG_SERIAL_OWL is not set
# CONFIG_SERIAL_RDA is not set
# CONFIG_SERIAL_LITEUART is not set
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=m
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y
CONFIG_NULL_TTY=m
CONFIG_HVC_DRIVER=y
CONFIG_RPMSG_TTY=m
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
CONFIG_IPMB_DEVICE_INTERFACE=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_BA431=m
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_IXP4XX=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_IMX_RNGC=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_HW_RANDOM_STM32=y
CONFIG_HW_RANDOM_MESON=y
CONFIG_HW_RANDOM_MTK=y
CONFIG_HW_RANDOM_EXYNOS=y
CONFIG_HW_RANDOM_NPCM=y
# CONFIG_HW_RANDOM_XIPHERA is not set
CONFIG_HW_RANDOM_CN10K=y
CONFIG_APPLICOM=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
# CONFIG_CARDMAN_4040 is not set
# CONFIG_SCR24X is not set
# end of PCMCIA character devices

# CONFIG_DEVMEM is not set
# CONFIG_DEVPORT is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=m
# CONFIG_TCG_TIS_SPI is not set
CONFIG_TCG_TIS_I2C=m
# CONFIG_TCG_TIS_SYNQUACER is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_CRB is not set
CONFIG_TCG_VTPM_PROXY=m
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
CONFIG_TCG_TIS_ST33ZP24_SPI=m
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
# CONFIG_XILLYBUS_PCIE is not set
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_AMD_MP2=m
# CONFIG_I2C_HIX5HD2 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NVIDIA_GPU is not set
CONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=m
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
CONFIG_I2C_BRCMSTB=y
# CONFIG_I2C_CADENCE is not set
CONFIG_I2C_CBUS_GPIO=m
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_DIGICOLOR is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_SPRD is not set
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_WMT is not set
# CONFIG_I2C_THUNDERX is not set
CONFIG_I2C_XILINX=y
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
# CONFIG_I2C_SLAVE_TESTUNIT is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

CONFIG_I3C=m
CONFIG_CDNS_I3C_MASTER=m
# CONFIG_DW_I3C_MASTER is not set
# CONFIG_SVC_I3C_MASTER is not set
# CONFIG_MIPI_I3C_HCI is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_ALTERA_CORE=y
# CONFIG_SPI_AR934X is not set
# CONFIG_SPI_ATH79 is not set
# CONFIG_SPI_ARMADA_3700 is not set
CONFIG_SPI_AXI_SPI_ENGINE=m
# CONFIG_SPI_BCM2835 is not set
# CONFIG_SPI_BCM2835AUX is not set
# CONFIG_SPI_BCM63XX is not set
# CONFIG_SPI_BCM63XX_HSSPI is not set
# CONFIG_SPI_BCM_QSPI is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_CADENCE=y
# CONFIG_SPI_CADENCE_XSPI is not set
# CONFIG_SPI_CLPS711X is not set
CONFIG_SPI_DESIGNWARE=m
CONFIG_SPI_DW_DMA=y
# CONFIG_SPI_DW_PCI is not set
CONFIG_SPI_DW_MMIO=m
# CONFIG_SPI_DW_BT1 is not set
# CONFIG_SPI_EP93XX is not set
# CONFIG_SPI_FSL_LPSPI is not set
# CONFIG_SPI_FSL_QUADSPI is not set
# CONFIG_SPI_GXP is not set
# CONFIG_SPI_HISI_KUNPENG is not set
# CONFIG_SPI_HISI_SFC_V3XX is not set
CONFIG_SPI_NXP_FLEXSPI=m
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_IMG_SPFI is not set
# CONFIG_SPI_IMX is not set
# CONFIG_SPI_INGENIC is not set
# CONFIG_SPI_INTEL_PCI is not set
# CONFIG_SPI_INTEL_PLATFORM is not set
# CONFIG_SPI_LP8841_RTC is not set
# CONFIG_SPI_FSL_DSPI is not set
# CONFIG_SPI_MESON_SPICC is not set
# CONFIG_SPI_MESON_SPIFC is not set
CONFIG_SPI_MICROCHIP_CORE=m
CONFIG_SPI_MICROCHIP_CORE_QSPI=y
# CONFIG_SPI_MT65XX is not set
# CONFIG_SPI_MT7621 is not set
# CONFIG_SPI_MTK_NOR is not set
# CONFIG_SPI_NPCM_PSPI is not set
# CONFIG_SPI_LANTIQ_SSC is not set
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_OMAP24XX is not set
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_OMAP_100K is not set
# CONFIG_SPI_ORION is not set
# CONFIG_SPI_PIC32 is not set
# CONFIG_SPI_PIC32_SQI is not set
# CONFIG_SPI_PXA2XX is not set
CONFIG_SPI_ROCKCHIP=y
# CONFIG_SPI_ROCKCHIP_SFC is not set
# CONFIG_SPI_RSPI is not set
# CONFIG_SPI_QUP is not set
# CONFIG_SPI_S3C64XX is not set
CONFIG_SPI_SC18IS602=y
# CONFIG_SPI_SH_MSIOF is not set
# CONFIG_SPI_SH is not set
# CONFIG_SPI_SH_HSPI is not set
CONFIG_SPI_SIFIVE=y
# CONFIG_SPI_SPRD is not set
# CONFIG_SPI_SPRD_ADI is not set
# CONFIG_SPI_STM32 is not set
# CONFIG_SPI_ST_SSC4 is not set
# CONFIG_SPI_SUN4I is not set
# CONFIG_SPI_SUNPLUS_SP7021 is not set
# CONFIG_SPI_SYNQUACER is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_THUNDERX is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XCOMM is not set
CONFIG_SPI_XILINX=m
# CONFIG_SPI_XLP is not set
# CONFIG_SPI_XTENSA_XTFPGA is not set
# CONFIG_SPI_ZYNQ_QSPI is not set
CONFIG_SPI_ZYNQMP_GQSPI=y
CONFIG_SPI_AMD=m

#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=m

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=m
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
# CONFIG_HSI_CHAR is not set
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
# CONFIG_NTP_PPS is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=y
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

# CONFIG_PINCTRL is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_CLPS711X is not set
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EXAR=m
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_HISI is not set
# CONFIG_GPIO_IOP is not set
# CONFIG_GPIO_MB86S7X is not set
CONFIG_GPIO_MENZ127=m
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_ROCKCHIP is not set
CONFIG_GPIO_SIOX=m
# CONFIG_GPIO_THUNDERX is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XGENE_SB is not set
# CONFIG_GPIO_XLP is not set
CONFIG_GPIO_AMD_FCH=y
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=m
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=m
# CONFIG_GPIO_BD9571MWV is not set
# CONFIG_GPIO_DA9052 is not set
CONFIG_GPIO_DA9055=y
# CONFIG_GPIO_JANZ_TTL is not set
CONFIG_GPIO_LP3943=y
# CONFIG_GPIO_LP873X is not set
CONFIG_GPIO_RC5T583=y
# CONFIG_GPIO_SL28CPLD is not set
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TPS65910=y
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_TQMX86=m
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_UCB1400=m
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8350=m
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
CONFIG_GPIO_BT8XX=m
# CONFIG_GPIO_MLXBF is not set
# CONFIG_GPIO_MLXBF2 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCH is not set
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_PCIE_IDIO_24=m
CONFIG_GPIO_RDC321X=m
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
CONFIG_GPIO_MAX3191X=m
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=m
# CONFIG_GPIO_MOCKUP is not set
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=m
# end of Virtual GPIO drivers

CONFIG_W1=m

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_MXC is not set
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
CONFIG_W1_MASTER_SGI=m
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=m
CONFIG_W1_SLAVE_DS2430=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS250X=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves

# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_IP5XXX_POWER=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=m
CONFIG_TEST_POWER=m
CONFIG_CHARGER_ADP5061=y
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SAMSUNG_SDI=y
# CONFIG_BATTERY_WM97XX is not set
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
# CONFIG_MANAGER_SBS is not set
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_HDQ=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
# CONFIG_BATTERY_DA9052 is not set
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
# CONFIG_BATTERY_MAX1721X is not set
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=m
CONFIG_CHARGER_LP8727=m
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_LT3651=y
# CONFIG_CHARGER_LTC4162L is not set
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_MAX77976=m
# CONFIG_CHARGER_MP2629 is not set
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ2515X is not set
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=m
CONFIG_CHARGER_BQ256XX=y
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_GOLDFISH=m
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=m
# CONFIG_CHARGER_SC2731 is not set
# CONFIG_FUEL_GAUGE_SC27XX is not set
CONFIG_CHARGER_BD99954=m
CONFIG_BATTERY_UG3105=y
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_AD7314=m
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=m
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_AHT10=m
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_BT1_PVT is not set
# CONFIG_SENSORS_DRIVETEMP is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DA9052_ADC=m
CONFIG_SENSORS_DA9055=m
CONFIG_SENSORS_I5K_AMB=m
# CONFIG_SENSORS_SPARX5 is not set
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_MC13783_ADC=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2947=m
# CONFIG_SENSORS_LTC2947_I2C is not set
CONFIG_SENSORS_LTC2947_SPI=m
CONFIG_SENSORS_LTC2990=m
CONFIG_SENSORS_LTC2992=m
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX127=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
CONFIG_SENSORS_MAX31730=m
CONFIG_SENSORS_MAX31760=m
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_TPS23861=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
# CONFIG_SENSORS_MR75203 is not set
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT6775_I2C=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NPCM7XX=m
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_PECI_CPUTEMP=m
CONFIG_SENSORS_PECI_DIMMTEMP=m
CONFIG_SENSORS_PECI=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1266 is not set
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_BPA_RS600 is not set
CONFIG_SENSORS_DELTA_AHE50DC_FAN=m
CONFIG_SENSORS_FSP_3Y=m
CONFIG_SENSORS_IBM_CFFPS=m
CONFIG_SENSORS_DPS920AB=m
CONFIG_SENSORS_INSPUR_IPSPS=m
CONFIG_SENSORS_IR35221=m
CONFIG_SENSORS_IR36021=m
CONFIG_SENSORS_IR38064=m
CONFIG_SENSORS_IRPS5401=m
CONFIG_SENSORS_ISL68137=m
# CONFIG_SENSORS_LM25066 is not set
# CONFIG_SENSORS_LT7182S is not set
# CONFIG_SENSORS_LTC2978 is not set
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX15301=m
# CONFIG_SENSORS_MAX16064 is not set
CONFIG_SENSORS_MAX16601=m
CONFIG_SENSORS_MAX20730=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX31785=m
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_MP2888=m
CONFIG_SENSORS_MP2975=m
CONFIG_SENSORS_MP5023=m
CONFIG_SENSORS_PIM4328=m
CONFIG_SENSORS_PLI1209BC=m
# CONFIG_SENSORS_PM6764TR is not set
CONFIG_SENSORS_PXE1610=m
CONFIG_SENSORS_Q54SJ108A2=m
# CONFIG_SENSORS_STPDDC60 is not set
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_TPS53679=m
# CONFIG_SENSORS_TPS546D24 is not set
# CONFIG_SENSORS_UCD9000 is not set
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE152 is not set
# CONFIG_SENSORS_XDPE122 is not set
# CONFIG_SENSORS_ZL6100 is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
# CONFIG_SENSORS_SL28CPLD is not set
CONFIG_SENSORS_SBTSI=m
CONFIG_SENSORS_SBRMI=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
# CONFIG_SENSORS_SHT4x is not set
CONFIG_SENSORS_SHTC1=m
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SY7636A=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC2305=m
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_STTS751=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_INA238=m
# CONFIG_SENSORS_INA3221 is not set
CONFIG_SENSORS_TC74=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_TMP464=m
CONFIG_SENSORS_TMP513=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83773G=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83795_FANCTRL=y
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM831X=m
# CONFIG_SENSORS_WM8350 is not set
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=m

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_DEVFREQ_THERMAL is not set
CONFIG_THERMAL_EMULATION=y
# CONFIG_K3_THERMAL is not set
# CONFIG_RCAR_THERMAL is not set

#
# Intel thermal drivers
#

#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers

#
# Broadcom thermal drivers
#
# CONFIG_BRCMSTB_THERMAL is not set
# CONFIG_BCM_NS_THERMAL is not set
# CONFIG_BCM_SR_THERMAL is not set
# end of Broadcom thermal drivers

#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers

#
# Samsung thermal drivers
#
# end of Samsung thermal drivers

#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
# CONFIG_TEGRA_BPMP_THERMAL is not set
# CONFIG_TEGRA30_TSENSOR is not set
# end of NVIDIA Tegra thermal drivers

# CONFIG_GENERIC_ADC_THERMAL is not set

#
# Qualcomm thermal drivers
#
# end of Qualcomm thermal drivers

# CONFIG_SPRD_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_AT91_USART is not set
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=m
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=m
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
CONFIG_HTC_PASIC3=m
# CONFIG_HTC_I2CPLD is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_MFD_IQS62X is not set
CONFIG_MFD_JANZ_CMODIO=m
# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_MAX14577=m
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=m
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6370=m
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=m
CONFIG_MFD_OCELOT=m
CONFIG_EZX_PCAP=y
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
CONFIG_UCB1400_CORE=m
# CONFIG_MFD_PM8XXX is not set
CONFIG_MFD_SY7636A=m
CONFIG_MFD_RDC321X=m
CONFIG_MFD_RT4831=m
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RT5120=m
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=y
# CONFIG_MFD_SL28CPLD is not set
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SC27XX_PMIC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TI_LP873X=m
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
# CONFIG_MFD_TPS65912_I2C is not set
CONFIG_MFD_TPS65912_SPI=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TQMX86=m
CONFIG_MFD_VX855=m
CONFIG_MFD_ARIZONA=m
CONFIG_MFD_ARIZONA_I2C=m
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_CS47L24 is not set
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_STW481X is not set
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
# CONFIG_MFD_STMFX is not set
CONFIG_MFD_WCD934X=m
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
CONFIG_RAVE_SP_CORE=y
CONFIG_MFD_INTEL_M10_BMC=m
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=y
# CONFIG_LIRC is not set
# CONFIG_RC_MAP is not set
# CONFIG_RC_DECODERS is not set
# CONFIG_RC_DEVICES is not set
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y

#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=m
# CONFIG_CEC_MESON_AO is not set
# CONFIG_CEC_GPIO is not set
# CONFIG_CEC_SAMSUNG_S5P is not set
# CONFIG_CEC_STI is not set
# CONFIG_CEC_STM32 is not set
# CONFIG_CEC_TEGRA is not set
CONFIG_CEC_SECO=y
CONFIG_CEC_SECO_RC=y
# end of CEC support

CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_SUPPORT_FILTER=y
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_SDR_SUPPORT=y
# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
# CONFIG_MEDIA_TEST_SUPPORT is not set
# end of Media device types

CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_FLASH_LED_CLASS=m
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
# end of Video4Linux options

#
# Media controller options
#
# end of Media controller options

#
# Media drivers
#

#
# Drivers filtered as selected at 'Filter media drivers'
#

#
# Media drivers
#
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_STA2X11_VIP is not set
CONFIG_VIDEO_TW5864=m
CONFIG_VIDEO_TW68=m
# CONFIG_VIDEO_TW686X is not set
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=y
CONFIG_VIDEO_ZORAN_ZR36060=y
# CONFIG_VIDEO_ZORAN_BUZ is not set
# CONFIG_VIDEO_ZORAN_DC10 is not set
# CONFIG_VIDEO_ZORAN_LML33 is not set
# CONFIG_VIDEO_ZORAN_LML33R10 is not set
# CONFIG_VIDEO_ZORAN_AVS6EYES is not set

#
# Media capture/analog TV support
#
# CONFIG_VIDEO_DT3155 is not set
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_COBALT=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
# CONFIG_VIDEO_CX88_BLACKBIRD is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
# CONFIG_VIDEO_SAA7134_RC is not set
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=m
CONFIG_VIDEO_CCS_PLL=m
# CONFIG_VIDEO_AR0521 is not set
CONFIG_VIDEO_HI556=m
CONFIG_VIDEO_HI846=m
CONFIG_VIDEO_HI847=m
CONFIG_VIDEO_IMX208=m
CONFIG_VIDEO_IMX214=m
CONFIG_VIDEO_IMX219=m
CONFIG_VIDEO_IMX258=m
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
# CONFIG_VIDEO_IMX319 is not set
CONFIG_VIDEO_IMX355=m
CONFIG_VIDEO_MAX9271_LIB=m
CONFIG_VIDEO_MT9M001=m
CONFIG_VIDEO_MT9M032=m
CONFIG_VIDEO_MT9M111=m
# CONFIG_VIDEO_MT9P031 is not set
CONFIG_VIDEO_MT9T001=m
CONFIG_VIDEO_MT9T112=m
# CONFIG_VIDEO_MT9V011 is not set
CONFIG_VIDEO_MT9V032=m
CONFIG_VIDEO_MT9V111=m
CONFIG_VIDEO_NOON010PC30=m
CONFIG_VIDEO_OG01A1B=m
CONFIG_VIDEO_OV02A10=m
CONFIG_VIDEO_OV08D10=m
# CONFIG_VIDEO_OV13858 is not set
CONFIG_VIDEO_OV13B10=m
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV2659=m
CONFIG_VIDEO_OV2680=m
# CONFIG_VIDEO_OV2685 is not set
CONFIG_VIDEO_OV2740=m
CONFIG_VIDEO_OV5647=m
CONFIG_VIDEO_OV5670=m
CONFIG_VIDEO_OV5675=m
# CONFIG_VIDEO_OV5693 is not set
CONFIG_VIDEO_OV5695=m
CONFIG_VIDEO_OV6650=m
# CONFIG_VIDEO_OV7251 is not set
CONFIG_VIDEO_OV7640=m
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV772X is not set
CONFIG_VIDEO_OV7740=m
CONFIG_VIDEO_OV8856=m
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
CONFIG_VIDEO_OV9734=m
# CONFIG_VIDEO_RDACM20 is not set
CONFIG_VIDEO_RDACM21=m
# CONFIG_VIDEO_RJ54N1 is not set
CONFIG_VIDEO_S5C73M3=m
CONFIG_VIDEO_S5K4ECGX=m
# CONFIG_VIDEO_S5K5BAF is not set
CONFIG_VIDEO_S5K6A3=m
# CONFIG_VIDEO_S5K6AA is not set
CONFIG_VIDEO_SR030PC30=m
CONFIG_VIDEO_VS6624=m
CONFIG_VIDEO_CCS=m
CONFIG_VIDEO_ET8EK8=m
# CONFIG_VIDEO_M5MOLS is not set
# end of Camera sensor devices

#
# Lens drivers
#
CONFIG_VIDEO_AD5820=m
CONFIG_VIDEO_AK7375=m
CONFIG_VIDEO_DW9714=m
CONFIG_VIDEO_DW9768=m
CONFIG_VIDEO_DW9807_VCM=m
# end of Lens drivers

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
CONFIG_VIDEO_LM3646=m
# end of Flash devices

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SONY_BTF_MPX=m
CONFIG_VIDEO_TDA7432=m
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_TLV320AIC23B=m
# CONFIG_VIDEO_TVAUDIO is not set
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_WM8775=m
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
# end of RDS decoders

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
CONFIG_VIDEO_ADV7183=m
CONFIG_VIDEO_ADV7604=m
# CONFIG_VIDEO_ADV7604_CEC is not set
CONFIG_VIDEO_ADV7842=m
CONFIG_VIDEO_ADV7842_CEC=y
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TC358743=m
CONFIG_VIDEO_TC358743_CEC=y
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
CONFIG_VIDEO_TW9910=m
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
# end of Video decoders

#
# Video encoders
#
# CONFIG_VIDEO_AD9389B is not set
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7343=m
# CONFIG_VIDEO_ADV7393 is not set
CONFIG_VIDEO_ADV7511=m
CONFIG_VIDEO_ADV7511_CEC=y
CONFIG_VIDEO_AK881X=m
CONFIG_VIDEO_SAA7127=m
# CONFIG_VIDEO_SAA7185 is not set
CONFIG_VIDEO_THS8200=m
# end of Video encoders

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# end of Video improvement chips

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips

#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=m
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_ST_MIPID02=m
CONFIG_VIDEO_THS7303=m
# end of Miscellaneous helper chips

#
# Media SPI Adapters
#
CONFIG_VIDEO_GS1662=m
# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=m
# CONFIG_MEDIA_TUNER_FC0011 is not set
CONFIG_MEDIA_TUNER_FC0012=m
# CONFIG_MEDIA_TUNER_FC0013 is not set
# CONFIG_MEDIA_TUNER_FC2580 is not set
# CONFIG_MEDIA_TUNER_IT913X is not set
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
# CONFIG_MEDIA_TUNER_MAX2165 is not set
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MSI001=m
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2063 is not set
# CONFIG_MEDIA_TUNER_MT20XX is not set
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QT1010=m
# CONFIG_MEDIA_TUNER_R820T is not set
# CONFIG_MEDIA_TUNER_SI2157 is not set
# CONFIG_MEDIA_TUNER_SIMPLE is not set
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA827X=m
# CONFIG_MEDIA_TUNER_TDA8290 is not set
CONFIG_MEDIA_TUNER_TDA9887=m
# CONFIG_MEDIA_TUNER_TEA5761 is not set
CONFIG_MEDIA_TUNER_TEA5767=m
# CONFIG_MEDIA_TUNER_TUA9001 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not set
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m
# end of Customize TV tuners
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
# CONFIG_AGP is not set
# CONFIG_IMX_IPUV3_CORE is not set
CONFIG_DRM=m
CONFIG_DRM_MIPI_DBI=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_FBDEV_EMULATION is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_DMA_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_KMB_DISPLAY is not set
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VKMS=m
CONFIG_DRM_AST=m
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_SUN4I is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_MSM is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
CONFIG_DRM_ANALOGIX_ANX78XX=m
CONFIG_DRM_ANALOGIX_DP=m
# end of Display Interface Bridges

# CONFIG_DRM_V3D is not set
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_LOGICVC is not set
CONFIG_DRM_BOCHS=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_PANEL_MIPI_DBI=m
CONFIG_DRM_SIMPLEDRM=m
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
CONFIG_TINYDRM_ILI9225=m
CONFIG_TINYDRM_ILI9341=m
CONFIG_TINYDRM_ILI9486=m
CONFIG_TINYDRM_MI0283QT=m
# CONFIG_TINYDRM_REPAPER is not set
CONFIG_TINYDRM_ST7586=m
CONFIG_TINYDRM_ST7735R=m
# CONFIG_DRM_PL111 is not set
# CONFIG_DRM_PANFROST is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m
CONFIG_DRM_NOMODESET=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
# CONFIG_FB_CLPS711X is not set
# CONFIG_FB_IMX is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_CONTROL is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_GBE is not set
# CONFIG_FB_PVR2 is not set
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_I740 is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=m
# CONFIG_FB_S3_DDC is not set
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=m
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_WM8505 is not set
# CONFIG_FB_PXA168 is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_SH_MOBILE_LCDC is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_S3C is not set
CONFIG_FB_SM501=m
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_DA8XX is not set
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_SIMPLE=m
CONFIG_FB_SSD1307=m
# CONFIG_FB_SM712 is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=m
CONFIG_BACKLIGHT_LM3533=y
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_DA9052=y
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_MT6370 is not set
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_RT4831=m
# CONFIG_BACKLIGHT_WM831X is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_AAT2870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_LP8788=y
# CONFIG_BACKLIGHT_PANDORA is not set
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=m
CONFIG_BACKLIGHT_ARCXCNN=m
CONFIG_BACKLIGHT_RAVE_SP=m
# end of Backlight & LCD device support

CONFIG_VGASTATE=y
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# end of Console display driver support

CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support

CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_CTL_FAST_LOOKUP=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_CTL_INPUT_VALIDATION=y
# CONFIG_SND_CTL_DEBUG is not set
CONFIG_SND_JACK_INJECTION_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
# CONFIG_SND_ALOOP is not set
CONFIG_SND_MTPAV=y
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=y
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=y
# CONFIG_SND_AU8810 is not set
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=y
CONFIG_SND_AW2=y
CONFIG_SND_BT87X=y
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=y
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=m
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=y
CONFIG_SND_CS46XX=y
# CONFIG_SND_CS46XX_NEW_DSP is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
# CONFIG_SND_LAYLA20 is not set
CONFIG_SND_DARLA24=y
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=y
CONFIG_SND_MONA=y
CONFIG_SND_MIA=m
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
CONFIG_SND_INDIGOIO=y
CONFIG_SND_INDIGODJ=y
CONFIG_SND_INDIGOIOX=m
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=m
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=y

#
# Don't forget to add built-in firmwares for HDSP driver
#
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_KORG1212=y
CONFIG_SND_LOLA=y
CONFIG_SND_LX6464ES=m
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_VIA82XX is not set
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=y

#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=m

#
# Set to Y if you want auto-loading the codec driver
#
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
CONFIG_SND_HDA_CODEC_CS8409=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_CA0132=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_SI3054=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
# end of HD-Audio

CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=y
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=y
# CONFIG_SND_SPI is not set
# CONFIG_SND_FIREWIRE is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_VIRTIO=m
CONFIG_AC97_BUS=y

#
# HID support
#
# CONFIG_HID is not set

#
# I2C HID support
#
# CONFIG_I2C_HID_ACPI is not set
# end of I2C HID support

#
# Intel ISH HID support
#
# end of Intel ISH HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_ARIEL is not set
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3532=m
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=m
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not set
# CONFIG_LEDS_COBALT_RAQ is not set
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP50XX=y
# CONFIG_LEDS_LP8788 is not set
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_WM8350=y
CONFIG_LEDS_DA9052=m
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_PWM=m
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_NS2=y
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_MENF21BMC=m
CONFIG_LEDS_IS31FL319X=m

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_MLXREG=y
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=y
# CONFIG_LEDS_IP30 is not set

#
# Flash and Torch LED drivers
#
# CONFIG_LEDS_AS3645A is not set
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_RT8515 is not set
CONFIG_LEDS_SGM3140=m

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=m
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_PATTERN=m
CONFIG_LEDS_TRIGGER_AUDIO=y
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
# CONFIG_UDMABUF is not set
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=m
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

CONFIG_GREYBUS=y
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
CONFIG_RTS5208=m

#
# IIO staging drivers
#

#
# Accelerometers
#
CONFIG_ADIS16203=m
CONFIG_ADIS16240=m
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD7816=m
# end of Analog to digital converters

#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
CONFIG_ADT7316_SPI=m
CONFIG_ADT7316_I2C=m
# end of Analog digital bi-direction converters

#
# Direct Digital Synthesis
#
# CONFIG_AD9832 is not set
CONFIG_AD9834=m
# end of Direct Digital Synthesis

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
# end of Network Analyzer, Impedance Converters

#
# Active energy metering IC
#
CONFIG_ADE7854=m
CONFIG_ADE7854_I2C=m
CONFIG_ADE7854_SPI=m
# end of Active energy metering IC

#
# Resolver to digital converters
#
# CONFIG_AD2S1210 is not set
# end of Resolver to digital converters
# end of IIO staging drivers

CONFIG_FB_SM750=y
# CONFIG_STAGING_MEDIA is not set
# CONFIG_FB_TFT is not set
CONFIG_GREYBUS_BOOTROM=m
# CONFIG_GREYBUS_FIRMWARE is not set
CONFIG_GREYBUS_LIGHT=y
CONFIG_GREYBUS_LOG=m
CONFIG_GREYBUS_LOOPBACK=m
# CONFIG_GREYBUS_POWER is not set
# CONFIG_GREYBUS_RAW is not set
CONFIG_GREYBUS_VIBRATOR=y
CONFIG_GREYBUS_BRIDGED_PHY=m
CONFIG_GREYBUS_GPIO=m
CONFIG_GREYBUS_I2C=m
CONFIG_GREYBUS_PWM=m
CONFIG_GREYBUS_SPI=m
# CONFIG_GREYBUS_UART is not set
# CONFIG_GREYBUS_ARCHE is not set
CONFIG_PI433=y
# CONFIG_FIELDBUS_DEV is not set
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
# CONFIG_VME_TSI148 is not set
CONFIG_VME_FAKE=y

#
# VME Device Drivers
#
CONFIG_VME_USER=m
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_SURFACE_AGGREGATOR is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_WM831X is not set

#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs

# CONFIG_CLK_HSDK is not set
CONFIG_LMK04832=y
# CONFIG_COMMON_CLK_APPLE_NCO is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SCMI is not set
# CONFIG_COMMON_CLK_SCPI is not set
CONFIG_COMMON_CLK_SI5341=m
CONFIG_COMMON_CLK_SI5351=m
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_BM1880 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_TPS68470 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_OXNAS is not set
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_COMMON_CLK_BOSTON is not set
# CONFIG_MXC_CLK is not set
# CONFIG_CLK_IMX8MM is not set
# CONFIG_CLK_IMX8MN is not set
# CONFIG_CLK_IMX8MP is not set
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set

#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers

# CONFIG_TI_SYSCON_CLK is not set

#
# Clock driver for MediaTek SoC
#
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6795 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC

#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms

# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
CONFIG_XILINX_VCU=m
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_HWSPINLOCK=y
# CONFIG_HWSPINLOCK_OMAP is not set
# CONFIG_HWSPINLOCK_QCOM is not set
# CONFIG_HWSPINLOCK_SPRD is not set
# CONFIG_HWSPINLOCK_STM32 is not set
# CONFIG_HWSPINLOCK_SUN6I is not set
# CONFIG_HSEM_U8500 is not set
CONFIG_MAILBOX=y
# CONFIG_IMX_MBOX is not set
# CONFIG_ROCKCHIP_MBOX is not set
# CONFIG_PCC is not set
CONFIG_ALTERA_MBOX=m
# CONFIG_POLARFIRE_SOC_MAILBOX is not set
# CONFIG_QCOM_APCS_IPC is not set
# CONFIG_BCM_PDC_MBOX is not set
# CONFIG_STM32_IPCC is not set
# CONFIG_MTK_ADSP_MBOX is not set
# CONFIG_MTK_CMDQ_MBOX is not set
# CONFIG_SUN6I_MSGBOX is not set
# CONFIG_SPRD_MBOX is not set
# CONFIG_QCOM_IPCC is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_DART is not set
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y
# CONFIG_OMAP_IOMMU is not set
# CONFIG_ROCKCHIP_IOMMU is not set
# CONFIG_SUN50I_IOMMU is not set
# CONFIG_EXYNOS_IOMMU is not set
# CONFIG_IPMMU_VMSA is not set
# CONFIG_APPLE_DART is not set
# CONFIG_ARM_SMMU is not set
# CONFIG_S390_CCW_IOMMU is not set
# CONFIG_S390_AP_IOMMU is not set
# CONFIG_MTK_IOMMU is not set
# CONFIG_QCOM_IOMMU is not set
# CONFIG_SPRD_IOMMU is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
# CONFIG_INGENIC_VPU_RPROC is not set
# CONFIG_MTK_SCP is not set
# CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set
# CONFIG_RCAR_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=m
# CONFIG_RPMSG_CTRL is not set
CONFIG_RPMSG_NS=m
CONFIG_RPMSG_QCOM_GLINK=m
CONFIG_RPMSG_QCOM_GLINK_RPM=m
CONFIG_RPMSG_VIRTIO=m
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
# CONFIG_APPLE_RTKIT is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers

# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set

#
# Broadcom SoC drivers
#
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers

#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMEM is not set
# CONFIG_QCOM_SMD_RPM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_WCNSS_CTRL is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers

# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_SOC_SAMSUNG is not set
CONFIG_SOC_TI=y
# CONFIG_UX500_SOC_ID is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
CONFIG_EXTCON_FSA9480=m
CONFIG_EXTCON_GPIO=m
# CONFIG_EXTCON_INTEL_INT3496 is not set
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=m
# CONFIG_EXTCON_MAX77693 is not set
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PTN5150=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=m
# CONFIG_MEMORY is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_BUFFER_DMA=m
CONFIG_IIO_BUFFER_DMAENGINE=m
CONFIG_IIO_BUFFER_HW_CONSUMER=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_TRIGGERED_EVENT=m

#
# Accelerometers
#
CONFIG_ADIS16201=m
CONFIG_ADIS16209=m
# CONFIG_ADXL313_I2C is not set
# CONFIG_ADXL313_SPI is not set
CONFIG_ADXL355=m
# CONFIG_ADXL355_I2C is not set
CONFIG_ADXL355_SPI=m
CONFIG_ADXL367=m
CONFIG_ADXL367_SPI=m
CONFIG_ADXL367_I2C=m
CONFIG_ADXL372=m
CONFIG_ADXL372_SPI=m
# CONFIG_ADXL372_I2C is not set
# CONFIG_BMA180 is not set
# CONFIG_BMA220 is not set
CONFIG_BMA400=m
CONFIG_BMA400_I2C=m
CONFIG_BMA400_SPI=m
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=m
CONFIG_BMI088_ACCEL=m
CONFIG_BMI088_ACCEL_SPI=m
# CONFIG_DA280 is not set
CONFIG_DA311=m
# CONFIG_DMARD06 is not set
# CONFIG_DMARD09 is not set
CONFIG_DMARD10=m
CONFIG_FXLS8962AF=m
CONFIG_FXLS8962AF_I2C=m
CONFIG_FXLS8962AF_SPI=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=m
CONFIG_MC3230=m
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
CONFIG_MMA7455_SPI=m
CONFIG_MMA7660=m
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
# CONFIG_MSA311 is not set
# CONFIG_MXC4005 is not set
CONFIG_MXC6255=m
CONFIG_SCA3000=m
CONFIG_SCA3300=m
# CONFIG_STK8312 is not set
CONFIG_STK8BA50=m
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=m
# CONFIG_AD7091R5 is not set
# CONFIG_AD7124 is not set
CONFIG_AD7192=m
CONFIG_AD7266=m
CONFIG_AD7280=m
CONFIG_AD7291=m
CONFIG_AD7292=m
CONFIG_AD7298=m
CONFIG_AD7476=m
CONFIG_AD7606=m
# CONFIG_AD7606_IFACE_PARALLEL is not set
CONFIG_AD7606_IFACE_SPI=m
# CONFIG_AD7766 is not set
# CONFIG_AD7768_1 is not set
CONFIG_AD7780=m
CONFIG_AD7791=m
# CONFIG_AD7793 is not set
CONFIG_AD7887=m
CONFIG_AD7923=m
CONFIG_AD7949=m
# CONFIG_AD799X is not set
# CONFIG_ASPEED_ADC is not set
# CONFIG_AT91_SAMA5D2_ADC is not set
# CONFIG_BCM_IPROC_ADC is not set
# CONFIG_BERLIN2_ADC is not set
CONFIG_ENVELOPE_DETECTOR=m
CONFIG_HI8435=m
# CONFIG_HX711 is not set
CONFIG_INA2XX_ADC=m
# CONFIG_INGENIC_ADC is not set
# CONFIG_IMX7D_ADC is not set
# CONFIG_IMX8QXP_ADC is not set
# CONFIG_LP8788_ADC is not set
# CONFIG_LPC18XX_ADC is not set
# CONFIG_LPC32XX_ADC is not set
CONFIG_LTC2471=m
CONFIG_LTC2485=m
# CONFIG_LTC2496 is not set
CONFIG_LTC2497=m
CONFIG_MAX1027=m
CONFIG_MAX11100=m
# CONFIG_MAX1118 is not set
CONFIG_MAX11205=m
# CONFIG_MAX1241 is not set
CONFIG_MAX1363=m
CONFIG_MAX9611=m
CONFIG_MCP320X=m
# CONFIG_MCP3422 is not set
CONFIG_MCP3911=m
# CONFIG_MEDIATEK_MT6360_ADC is not set
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
CONFIG_MEN_Z188_ADC=m
CONFIG_MP2629_ADC=m
# CONFIG_NAU7802 is not set
# CONFIG_NPCM_ADC is not set
# CONFIG_RCAR_GYRO_ADC is not set
# CONFIG_RICHTEK_RTQ6056 is not set
# CONFIG_RZG2L_ADC is not set
# CONFIG_SC27XX_ADC is not set
# CONFIG_SPEAR_ADC is not set
CONFIG_SD_ADC_MODULATOR=m
# CONFIG_STM32_DFSDM_CORE is not set
# CONFIG_STM32_DFSDM_ADC is not set
# CONFIG_TI_ADC081C is not set
CONFIG_TI_ADC0832=m
# CONFIG_TI_ADC084S021 is not set
CONFIG_TI_ADC12138=m
CONFIG_TI_ADC108S102=m
# CONFIG_TI_ADC128S052 is not set
# CONFIG_TI_ADC161S626 is not set
CONFIG_TI_ADS1015=m
CONFIG_TI_ADS7950=m
# CONFIG_TI_ADS8344 is not set
CONFIG_TI_ADS8688=m
CONFIG_TI_ADS124S08=m
CONFIG_TI_ADS131E08=m
CONFIG_TI_AM335X_ADC=m
CONFIG_TI_TLC4541=m
# CONFIG_TI_TSC2046 is not set
# CONFIG_TWL4030_MADC is not set
# CONFIG_TWL6030_GPADC is not set
# CONFIG_VF610_ADC is not set
CONFIG_XILINX_XADC=m
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
CONFIG_AD74413R=m
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set
# end of Analog Front Ends

#
# Amplifiers
#
CONFIG_AD8366=m
# CONFIG_ADA4250 is not set
CONFIG_HMC425=m
# end of Amplifiers

#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7746=m
# end of Capacitance to digital converters

#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_ATLAS_EZO_SENSOR is not set
CONFIG_BME680=m
CONFIG_BME680_I2C=m
CONFIG_BME680_SPI=m
CONFIG_CCS811=m
# CONFIG_IAQCORE is not set
CONFIG_PMS7003=m
CONFIG_SCD30_CORE=m
# CONFIG_SCD30_I2C is not set
# CONFIG_SCD30_SERIAL is not set
# CONFIG_SCD4X is not set
CONFIG_SENSIRION_SGP30=m
CONFIG_SENSIRION_SGP40=m
CONFIG_SPS30=m
CONFIG_SPS30_I2C=m
CONFIG_SPS30_SERIAL=m
CONFIG_SENSEAIR_SUNRISE_CO2=m
CONFIG_VZ89X=m
# end of Chemical Sensors

#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=m

#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=m
CONFIG_IIO_SSP_SENSORHUB=m
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=m
CONFIG_IIO_ST_SENSORS_CORE=m

#
# Digital to analog converters
#
# CONFIG_AD3552R is not set
CONFIG_AD5064=m
# CONFIG_AD5360 is not set
CONFIG_AD5380=m
CONFIG_AD5421=m
CONFIG_AD5446=m
CONFIG_AD5449=m
# CONFIG_AD5592R is not set
# CONFIG_AD5593R is not set
CONFIG_AD5504=m
# CONFIG_AD5624R_SPI is not set
CONFIG_LTC2688=m
CONFIG_AD5686=m
CONFIG_AD5686_SPI=m
CONFIG_AD5696_I2C=m
CONFIG_AD5755=m
CONFIG_AD5758=m
# CONFIG_AD5761 is not set
# CONFIG_AD5764 is not set
CONFIG_AD5766=m
CONFIG_AD5770R=m
CONFIG_AD5791=m
# CONFIG_AD7293 is not set
CONFIG_AD7303=m
CONFIG_AD8801=m
# CONFIG_DPOT_DAC is not set
CONFIG_DS4424=m
# CONFIG_LPC18XX_DAC is not set
CONFIG_LTC1660=m
CONFIG_LTC2632=m
CONFIG_M62332=m
# CONFIG_MAX517 is not set
# CONFIG_MAX5821 is not set
CONFIG_MCP4725=m
CONFIG_MCP4922=m
CONFIG_TI_DAC082S085=m
CONFIG_TI_DAC5571=m
# CONFIG_TI_DAC7311 is not set
CONFIG_TI_DAC7612=m
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters

#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
# end of IIO dummy driver

#
# Filters
#
CONFIG_ADMV8818=m
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
CONFIG_AD9523=m
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=m
CONFIG_ADF4371=m
# CONFIG_ADMV1013 is not set
CONFIG_ADMV1014=m
CONFIG_ADMV4420=m
CONFIG_ADRF6780=m
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
# CONFIG_ADIS16130 is not set
CONFIG_ADIS16136=m
# CONFIG_ADIS16260 is not set
# CONFIG_ADXRS290 is not set
# CONFIG_ADXRS450 is not set
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
CONFIG_FXAS21002C_SPI=m
# CONFIG_MPU3050_I2C is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
CONFIG_ITG3200=m
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
# CONFIG_AFE4403 is not set
CONFIG_AFE4404=m
# CONFIG_MAX30100 is not set
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
CONFIG_AM2315=m
# CONFIG_DHT11 is not set
# CONFIG_HDC100X is not set
CONFIG_HDC2010=m
# CONFIG_HTS221 is not set
CONFIG_HTU21=m
# CONFIG_SI7005 is not set
# CONFIG_SI7020 is not set
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_ADIS16400=m
CONFIG_ADIS16460=m
CONFIG_ADIS16475=m
CONFIG_ADIS16480=m
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
CONFIG_BMI160_SPI=m
CONFIG_BOSCH_BNO055=m
CONFIG_BOSCH_BNO055_SERIAL=m
CONFIG_BOSCH_BNO055_I2C=m
CONFIG_FXOS8700=m
# CONFIG_FXOS8700_I2C is not set
CONFIG_FXOS8700_SPI=m
CONFIG_KMX61=m
CONFIG_INV_ICM42600=m
# CONFIG_INV_ICM42600_I2C is not set
CONFIG_INV_ICM42600_SPI=m
CONFIG_INV_MPU6050_IIO=m
CONFIG_INV_MPU6050_I2C=m
CONFIG_INV_MPU6050_SPI=m
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_SPI=m
CONFIG_IIO_ST_LSM6DSX_I3C=m
CONFIG_IIO_ST_LSM9DS0=m
CONFIG_IIO_ST_LSM9DS0_I2C=m
# CONFIG_IIO_ST_LSM9DS0_SPI is not set
# end of Inertial measurement units

CONFIG_IIO_ADIS_LIB=m
CONFIG_IIO_ADIS_LIB_BUFFER=y

#
# Light sensors
#
CONFIG_ACPI_ALS=m
# CONFIG_ADJD_S311 is not set
CONFIG_ADUX1020=m
CONFIG_AL3010=m
# CONFIG_AL3320A is not set
CONFIG_APDS9300=m
CONFIG_APDS9960=m
CONFIG_AS73211=m
# CONFIG_BH1750 is not set
CONFIG_BH1780=m
CONFIG_CM32181=m
CONFIG_CM3232=m
# CONFIG_CM3323 is not set
CONFIG_CM3605=m
# CONFIG_CM36651 is not set
CONFIG_GP2AP002=m
CONFIG_GP2AP020A00F=m
# CONFIG_IQS621_ALS is not set
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
# CONFIG_ISL29125 is not set
CONFIG_JSA1212=m
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
CONFIG_LTR501=m
CONFIG_LTRF216A=m
# CONFIG_LV0104CS is not set
# CONFIG_MAX44000 is not set
CONFIG_MAX44009=m
CONFIG_NOA1305=m
CONFIG_OPT3001=m
CONFIG_PA12203001=m
CONFIG_SI1133=m
# CONFIG_SI1145 is not set
CONFIG_STK3310=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25_SPI=m
CONFIG_TCS3414=m
CONFIG_TCS3472=m
CONFIG_SENSORS_TSL2563=m
# CONFIG_TSL2583 is not set
CONFIG_TSL2591=m
# CONFIG_TSL2772 is not set
# CONFIG_TSL4531 is not set
CONFIG_US5182D=m
# CONFIG_VCNL4000 is not set
# CONFIG_VCNL4035 is not set
CONFIG_VEML6030=m
# CONFIG_VEML6070 is not set
CONFIG_VL6180=m
# CONFIG_ZOPT2201 is not set
# end of Light sensors

#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
# CONFIG_BMC150_MAGN_SPI is not set
CONFIG_MAG3110=m
CONFIG_MMC35240=m
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_SENSORS_HMC5843_SPI=m
CONFIG_SENSORS_RM3100=m
CONFIG_SENSORS_RM3100_I2C=m
# CONFIG_SENSORS_RM3100_SPI is not set
CONFIG_YAMAHA_YAS530=m
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=m
# end of Multiplexers

#
# Inclinometer sensors
#
# end of Inclinometer sensors

#
# Triggers - standalone
#
# CONFIG_IIO_HRTIMER_TRIGGER is not set
CONFIG_IIO_INTERRUPT_TRIGGER=m
# CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
# end of Triggers - standalone

#
# Linear and angular position sensors
#
# CONFIG_IQS624_POS is not set
# end of Linear and angular position sensors

#
# Digital potentiometers
#
CONFIG_AD5110=m
CONFIG_AD5272=m
CONFIG_DS1803=m
# CONFIG_MAX5432 is not set
CONFIG_MAX5481=m
CONFIG_MAX5487=m
CONFIG_MCP4018=m
CONFIG_MCP4131=m
CONFIG_MCP4531=m
CONFIG_MCP41010=m
CONFIG_TPL0102=m
# end of Digital potentiometers

#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set
# end of Digital potentiostats

#
# Pressure sensors
#
CONFIG_ABP060MG=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_BMP280_SPI=m
CONFIG_DLHL60D=m
CONFIG_DPS310=m
CONFIG_HP03=m
CONFIG_ICP10100=m
CONFIG_MPL115=m
CONFIG_MPL115_I2C=m
CONFIG_MPL115_SPI=m
CONFIG_MPL3115=m
# CONFIG_MS5611 is not set
# CONFIG_MS5637 is not set
CONFIG_IIO_ST_PRESS=m
# CONFIG_IIO_ST_PRESS_I2C is not set
CONFIG_IIO_ST_PRESS_SPI=m
CONFIG_T5403=m
# CONFIG_HP206C is not set
CONFIG_ZPA2326=m
CONFIG_ZPA2326_I2C=m
CONFIG_ZPA2326_SPI=m
# end of Pressure sensors

#
# Lightning sensors
#
CONFIG_AS3935=m
# end of Lightning sensors

#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
# CONFIG_LIDAR_LITE_V2 is not set
CONFIG_MB1232=m
CONFIG_PING=m
# CONFIG_RFD77402 is not set
CONFIG_SRF04=m
CONFIG_SX_COMMON=m
CONFIG_SX9310=m
# CONFIG_SX9324 is not set
CONFIG_SX9360=m
# CONFIG_SX9500 is not set
# CONFIG_SRF08 is not set
CONFIG_VCNL3020=m
# CONFIG_VL53L0X_I2C is not set
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
CONFIG_AD2S90=m
CONFIG_AD2S1200=m
# end of Resolver to digital converters

#
# Temperature sensors
#
# CONFIG_IQS620AT_TEMP is not set
# CONFIG_LTC2983 is not set
CONFIG_MAXIM_THERMOCOUPLE=m
CONFIG_MLX90614=m
# CONFIG_MLX90632 is not set
CONFIG_TMP006=m
CONFIG_TMP007=m
# CONFIG_TMP117 is not set
# CONFIG_TSYS01 is not set
CONFIG_TSYS02D=m
# CONFIG_MAX31856 is not set
# CONFIG_MAX31865 is not set
# end of Temperature sensors

# CONFIG_NTB is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
# CONFIG_PWM_BCM_IPROC is not set
# CONFIG_PWM_BCM_KONA is not set
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_BERLIN is not set
# CONFIG_PWM_BRCMSTB is not set
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_CLPS711X is not set
CONFIG_PWM_DWC=y
# CONFIG_PWM_EP93XX is not set
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMG is not set
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
# CONFIG_PWM_IMX_TPM is not set
# CONFIG_PWM_INTEL_LGM is not set
# CONFIG_PWM_IQS620A is not set
# CONFIG_PWM_JZ4740 is not set
# CONFIG_PWM_KEEMBAY is not set
# CONFIG_PWM_LP3943 is not set
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not set
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_PCA9685 is not set
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
# CONFIG_PWM_SAMSUNG is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPRD is not set
# CONFIG_PWM_STM32 is not set
# CONFIG_PWM_STM32_LP is not set
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_TEGRA is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
CONFIG_PWM_TWL=y
# CONFIG_PWM_TWL_LED is not set
# CONFIG_PWM_VISCONTI is not set
# CONFIG_PWM_VT8500 is not set

#
# IRQ chip support
#
# CONFIG_AL_FIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support

CONFIG_IPACK_BUS=m
# CONFIG_BOARD_TPCI200 is not set
CONFIG_SERIAL_IPOCTAL=m
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
CONFIG_BCM_KONA_USB2_PHY=m
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
CONFIG_PHY_PXA_28NM_HSIC=m
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_MCB=y
# CONFIG_MCB_PCI is not set
CONFIG_MCB_LPC=y
CONFIG_RAS=y
CONFIG_USB4=m
CONFIG_USB4_DEBUGFS_WRITE=y
# CONFIG_USB4_DEBUGFS_MARGINING is not set
# CONFIG_USB4_DMA_TEST is not set

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
CONFIG_NVMEM_RAVE_SP_EEPROM=m
CONFIG_NVMEM_RMEM=y
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
# CONFIG_NVMEM_SPRD_EFUSE is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set

#
# HW tracing support
#
# CONFIG_STM is not set
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
# CONFIG_INTEL_TH_ACPI is not set
# CONFIG_INTEL_TH_GTH is not set
# CONFIG_INTEL_TH_MSU is not set
# CONFIG_INTEL_TH_PTI is not set
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support

CONFIG_FPGA=y
# CONFIG_FPGA_MGR_SOCFPGA is not set
# CONFIG_FPGA_MGR_SOCFPGA_A10 is not set
CONFIG_ALTERA_PR_IP_CORE=m
CONFIG_FPGA_MGR_ALTERA_PS_SPI=y
CONFIG_FPGA_MGR_ALTERA_CVP=m
# CONFIG_FPGA_MGR_ZYNQ_FPGA is not set
CONFIG_FPGA_MGR_XILINX_SPI=m
CONFIG_FPGA_MGR_MACHXO2_SPI=y
# CONFIG_FPGA_BRIDGE is not set
# CONFIG_FPGA_DFL is not set
# CONFIG_FPGA_MGR_ZYNQMP_FPGA is not set
# CONFIG_FPGA_MGR_VERSAL_FPGA is not set
CONFIG_FPGA_M10_BMC_SEC_UPDATE=m
# CONFIG_FPGA_MGR_MICROCHIP_SPI is not set
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=m

#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
CONFIG_MUX_ADGS1408=m
CONFIG_MUX_GPIO=m
# CONFIG_MUX_MMIO is not set
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_SIOX=m
CONFIG_SIOX_BUS_GPIO=m
CONFIG_SLIMBUS=m
CONFIG_SLIM_QCOM_CTRL=m
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=y
# CONFIG_104_QUAD_8 is not set
# CONFIG_INTERRUPT_CNT is not set
# CONFIG_STM32_TIMER_CNT is not set
# CONFIG_STM32_LPTIMER_CNT is not set
# CONFIG_TI_EQEP is not set
CONFIG_INTEL_QEP=m
# CONFIG_TI_ECAP_CAPTURE is not set
# CONFIG_MOST is not set
CONFIG_PECI=y
CONFIG_PECI_CPU=m
CONFIG_HTE=y
# end of Device Drivers

#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_SUPPORT_V4 is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
CONFIG_XFS_DEBUG=y
# CONFIG_XFS_ASSERT_FATAL is not set
CONFIG_GFS2_FS=y
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_BTRFS_FS_REF_VERIFY=y
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_ZONEFS_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=m
# CONFIG_FS_ENCRYPTION_INLINE_CRYPT is not set
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
CONFIG_OVERLAY_FS_METACOPY=y

#
# Caches
#
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
CONFIG_FSCACHE_DEBUG=y
# CONFIG_CACHEFILES is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
CONFIG_NTFS3_FS=m
# CONFIG_NTFS3_64BIT_CLUSTER is not set
# CONFIG_NTFS3_LZX_XPRESS is not set
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
# CONFIG_HUGETLBFS is not set
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems

# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=m
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=m
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=m
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=m
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y

#
# No trust source selected!
#
CONFIG_ENCRYPTED_KEYS=y
CONFIG_USER_DECRYPTED_DATA=y
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_PATH=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_SECURITY_LOADPIN=y
# CONFIG_SECURITY_LOADPIN_ENFORCE is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
CONFIG_SECURITY_LOCKDOWN_LSM=y
# CONFIG_SECURITY_LOCKDOWN_LSM_EARLY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE is not set
CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
CONFIG_SECURITY_LANDLOCK=y
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_FIPS_NAME="Linux Kernel Cryptographic API"
CONFIG_CRYPTO_FIPS_CUSTOM_VERSION=y
CONFIG_CRYPTO_FIPS_VERSION="(none)"
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ENGINE=m
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=y
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=y
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SM4_GENERIC=y
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=m
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XCTR=m
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_ECHAINIV is not set
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=m
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_POLYVAL=m
CONFIG_CRYPTO_POLY1305=m
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_XXHASH=m
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=m
# end of Compression

#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation

#
# Userspace interface
#
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_ALLWINNER is not set
# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set
# CONFIG_CRYPTO_DEV_S5P is not set
# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=y
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=y
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CAVIUM_CPT is not set
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
# CONFIG_CRYPTO_DEV_OCTEONTX_CPT is not set
# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
# CONFIG_CRYPTO_DEV_QCE is not set
# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_CRYPTO_DEV_SAFEXCEL=m
# CONFIG_CRYPTO_DEV_HISI_SEC is not set
# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
# CONFIG_CRYPTO_DEV_HISI_ZIP is not set
# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
# CONFIG_CRYPTO_DEV_SA2UL is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 is not set
# CONFIG_CRYPTO_DEV_ASPEED is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
# CONFIG_MODULE_SIG_KEY_TYPE_RSA is not set
CONFIG_MODULE_SIG_KEY_TYPE_ECDSA=y
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=m
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_ARCH_HAS_STRNCPY_FROM_USER=y
CONFIG_ARCH_HAS_STRNLEN_USER=y
CONFIG_CORDIC=y
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=m
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=m
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=m
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=m
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=m
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_DMA_MARK_CLEAN=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CPUMASK_OFFSTACK=y
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_SG_POOL=y
CONFIG_MEMREGION=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_COMPRESSED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_BTF is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
CONFIG_DEBUG_FS_DISALLOW_MOUNT=y
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SHRINKER_DEBUG=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_MAPLE_TREE is not set
# CONFIG_DEBUG_VM_RB is not set
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_RWSEMS=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_SCF_TORTURE_TEST=y
CONFIG_CSD_LOCK_WAIT_DEBUG=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
CONFIG_DEBUG_KOBJECT=y

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_REF_SCALE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set

#
# ia64 Debugging
#
CONFIG_IA64_GRANULE_16MB=y
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_DISABLE_VHPT is not set
CONFIG_IA64_DEBUG_CMPXCHG=y
CONFIG_IA64_DEBUG_IRQ=y
# end of ia64 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
# CONFIG_FAULT_INJECTION is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_RUNTIME_TESTING_MENU is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking

# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking