* [PATCH v2 01/12] dt-bindings: display: msm: Add qcom,sm8350-dpu binding
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
@ 2022-11-15 13:30 ` Robert Foss
2022-11-15 13:30 ` [PATCH v2 02/12] dt-bindings: display: msm: Add qcom, sm8350-mdss binding Robert Foss
` (11 subsequent siblings)
12 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:30 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
Mobile Display Subsystem (MDSS) encapsulates sub-blocks
like DPU display controller, DSI etc. Add YAML schema for DPU device
tree bindings
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
.../bindings/display/msm/qcom,sm8350-dpu.yaml | 120 ++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
new file mode 100644
index 000000000000..120500395c9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display DPU
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8350-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display ahb clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8350.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8350-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+...
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH v2 01/12] dt-bindings: display: msm: Add qcom, sm8350-dpu binding
@ 2022-11-15 13:30 ` Robert Foss
0 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:30 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
Mobile Display Subsystem (MDSS) encapsulates sub-blocks
like DPU display controller, DSI etc. Add YAML schema for DPU device
tree bindings
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
.../bindings/display/msm/qcom,sm8350-dpu.yaml | 120 ++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
new file mode 100644
index 000000000000..120500395c9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display DPU
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8350-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display ahb clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8350.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8350-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+...
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [PATCH v2 01/12] dt-bindings: display: msm: Add qcom,sm8350-dpu binding
2022-11-15 13:30 ` [PATCH v2 01/12] dt-bindings: display: msm: Add qcom, sm8350-dpu binding Robert Foss
@ 2022-11-16 14:59 ` Rob Herring
-1 siblings, 0 replies; 34+ messages in thread
From: Rob Herring @ 2022-11-16 14:59 UTC (permalink / raw)
To: Robert Foss
Cc: airlied, konrad.dybcio, dri-devel, dianders,
krzysztof.kozlowski+dt, angelogioacchino.delregno, quic_vpolimer,
vinod.koul, Jonathan Marek, vkoul, quic_khsieh, agross,
quic_jesszhan, devicetree, linux-arm-msm, quic_abhinavk, swboyd,
robh+dt, bjorn.andersson, sean, quic_kalyant, loic.poulain,
andersson, linux-kernel, dmitry.baryshkov, freedreno
On Tue, 15 Nov 2022 14:30:54 +0100, Robert Foss wrote:
> Mobile Display Subsystem (MDSS) encapsulates sub-blocks
> like DPU display controller, DSI etc. Add YAML schema for DPU device
> tree bindings
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
> .../bindings/display/msm/qcom,sm8350-dpu.yaml | 120 ++++++++++++++++++
> 1 file changed, 120 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v2 01/12] dt-bindings: display: msm: Add qcom,sm8350-dpu binding
@ 2022-11-16 14:59 ` Rob Herring
0 siblings, 0 replies; 34+ messages in thread
From: Rob Herring @ 2022-11-16 14:59 UTC (permalink / raw)
To: Robert Foss
Cc: loic.poulain, krzysztof.kozlowski+dt, quic_jesszhan, vinod.koul,
sean, linux-kernel, quic_kalyant, dmitry.baryshkov, freedreno,
quic_abhinavk, airlied, andersson, konrad.dybcio,
angelogioacchino.delregno, swboyd, quic_vpolimer, quic_khsieh,
linux-arm-msm, robh+dt, devicetree, daniel, Jonathan Marek,
dri-devel, robdclark, agross, dianders, bjorn.andersson, vkoul
On Tue, 15 Nov 2022 14:30:54 +0100, Robert Foss wrote:
> Mobile Display Subsystem (MDSS) encapsulates sub-blocks
> like DPU display controller, DSI etc. Add YAML schema for DPU device
> tree bindings
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
> .../bindings/display/msm/qcom,sm8350-dpu.yaml | 120 ++++++++++++++++++
> 1 file changed, 120 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v2 02/12] dt-bindings: display: msm: Add qcom,sm8350-mdss binding
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
@ 2022-11-15 13:30 ` Robert Foss
2022-11-15 13:30 ` [PATCH v2 02/12] dt-bindings: display: msm: Add qcom, sm8350-mdss binding Robert Foss
` (11 subsequent siblings)
12 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:30 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
Mobile Display Subsystem (MDSS) encapsulates sub-blocks
like DPU display controller, DSI etc. Add YAML schema for MDSS device
tree bindings
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
.../display/msm/qcom,sm8350-mdss.yaml | 240 ++++++++++++++++++
1 file changed, 240 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
new file mode 100644
index 000000000000..9a0694853576
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -0,0 +1,240 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display MDSS
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SM8350 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sm8350-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: nrt_bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8350-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-5nm-8350
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8350.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8350-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ iommus = <&apps_smmu 0x820 0x402>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8350-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi0: dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>,
+ <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-5nm-8350";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ vdds-supply = <&vreg_l5b_0p88>;
+ };
+ };
+...
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH v2 02/12] dt-bindings: display: msm: Add qcom, sm8350-mdss binding
@ 2022-11-15 13:30 ` Robert Foss
0 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:30 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
Mobile Display Subsystem (MDSS) encapsulates sub-blocks
like DPU display controller, DSI etc. Add YAML schema for MDSS device
tree bindings
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
.../display/msm/qcom,sm8350-mdss.yaml | 240 ++++++++++++++++++
1 file changed, 240 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
new file mode 100644
index 000000000000..9a0694853576
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -0,0 +1,240 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display MDSS
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SM8350 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sm8350-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: nrt_bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm8350-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-5nm-8350
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8350.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8350-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ iommus = <&apps_smmu 0x820 0x402>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8350-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi0: dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>,
+ <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-5nm-8350";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ vdds-supply = <&vreg_l5b_0p88>;
+ };
+ };
+...
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH v2 03/12] drm/msm/dpu: Refactor sc7280_pp location
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
2022-11-15 13:30 ` [PATCH v2 01/12] dt-bindings: display: msm: Add qcom, sm8350-dpu binding Robert Foss
2022-11-15 13:30 ` [PATCH v2 02/12] dt-bindings: display: msm: Add qcom, sm8350-mdss binding Robert Foss
@ 2022-11-15 13:30 ` Robert Foss
2022-11-15 13:33 ` Konrad Dybcio
2022-11-17 13:37 ` Abhinav Kumar
2022-11-15 13:30 ` [PATCH v2 04/12] drm/msm/dpu: Add SM8350 to hw catalog Robert Foss
` (9 subsequent siblings)
12 siblings, 2 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:30 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
The sc7280_pp declaration is not located by the other _pp
declarations, but rather hidden around the _merge_3d
declarations. Let's fix this to avoid confusion.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 4dac90ee5b8a..8f2d634f7b6b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -1294,6 +1294,13 @@ static const struct dpu_pingpong_cfg sm8150_pp[] = {
-1),
};
+static const struct dpu_pingpong_cfg sc7280_pp[] = {
+ PP_BLK("pingpong_0", PINGPONG_0, 0x59000, 0, sc7280_pp_sblk, -1, -1),
+ PP_BLK("pingpong_1", PINGPONG_1, 0x6a000, 0, sc7280_pp_sblk, -1, -1),
+ PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, 0, sc7280_pp_sblk, -1, -1),
+ PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
+};
+
static struct dpu_pingpong_cfg qcm2290_pp[] = {
PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, sdm845_pp_sblk,
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
@@ -1352,13 +1359,6 @@ static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = {
MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x65f00),
};
-static const struct dpu_pingpong_cfg sc7280_pp[] = {
- PP_BLK("pingpong_0", PINGPONG_0, 0x59000, 0, sc7280_pp_sblk, -1, -1),
- PP_BLK("pingpong_1", PINGPONG_1, 0x6a000, 0, sc7280_pp_sblk, -1, -1),
- PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, 0, sc7280_pp_sblk, -1, -1),
- PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
-};
-
/*************************************************************
* DSC sub blocks config
*************************************************************/
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [PATCH v2 03/12] drm/msm/dpu: Refactor sc7280_pp location
2022-11-15 13:30 ` [PATCH v2 03/12] drm/msm/dpu: Refactor sc7280_pp location Robert Foss
@ 2022-11-15 13:33 ` Konrad Dybcio
2022-11-25 6:05 ` [Freedreno] " Abhinav Kumar
2022-11-17 13:37 ` Abhinav Kumar
1 sibling, 1 reply; 34+ messages in thread
From: Konrad Dybcio @ 2022-11-15 13:33 UTC (permalink / raw)
To: Robert Foss, robdclark, quic_abhinavk, dmitry.baryshkov, sean,
airlied, daniel, robh+dt, krzysztof.kozlowski+dt, agross,
bjorn.andersson, quic_kalyant, swboyd, angelogioacchino.delregno,
loic.poulain, quic_khsieh, quic_vpolimer, vkoul, dianders,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Jonathan Marek, vinod.koul, quic_jesszhan, andersson
On 15/11/2022 14:30, Robert Foss wrote:
> The sc7280_pp declaration is not located by the other _pp
> declarations, but rather hidden around the _merge_3d
> declarations. Let's fix this to avoid confusion.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
This is already merged.
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=1a5b5372e3b0a4cc65a0cbb724b1b0859f4ac63c
Konrad
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 4dac90ee5b8a..8f2d634f7b6b 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -1294,6 +1294,13 @@ static const struct dpu_pingpong_cfg sm8150_pp[] = {
> -1),
> };
>
> +static const struct dpu_pingpong_cfg sc7280_pp[] = {
> + PP_BLK("pingpong_0", PINGPONG_0, 0x59000, 0, sc7280_pp_sblk, -1, -1),
> + PP_BLK("pingpong_1", PINGPONG_1, 0x6a000, 0, sc7280_pp_sblk, -1, -1),
> + PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, 0, sc7280_pp_sblk, -1, -1),
> + PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
> +};
> +
> static struct dpu_pingpong_cfg qcm2290_pp[] = {
> PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, sdm845_pp_sblk,
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> @@ -1352,13 +1359,6 @@ static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = {
> MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x65f00),
> };
>
> -static const struct dpu_pingpong_cfg sc7280_pp[] = {
> - PP_BLK("pingpong_0", PINGPONG_0, 0x59000, 0, sc7280_pp_sblk, -1, -1),
> - PP_BLK("pingpong_1", PINGPONG_1, 0x6a000, 0, sc7280_pp_sblk, -1, -1),
> - PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, 0, sc7280_pp_sblk, -1, -1),
> - PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
> -};
> -
> /*************************************************************
> * DSC sub blocks config
> *************************************************************/
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [Freedreno] [PATCH v2 03/12] drm/msm/dpu: Refactor sc7280_pp location
2022-11-15 13:33 ` Konrad Dybcio
@ 2022-11-25 6:05 ` Abhinav Kumar
0 siblings, 0 replies; 34+ messages in thread
From: Abhinav Kumar @ 2022-11-25 6:05 UTC (permalink / raw)
To: Konrad Dybcio, Robert Foss, robdclark, dmitry.baryshkov, sean,
airlied, daniel, robh+dt, krzysztof.kozlowski+dt, agross,
bjorn.andersson, quic_kalyant, swboyd, angelogioacchino.delregno,
loic.poulain, quic_khsieh, quic_vpolimer, vkoul, dianders,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Jonathan Marek, vinod.koul, quic_jesszhan, andersson
On 11/15/2022 5:33 AM, Konrad Dybcio wrote:
>
>
> On 15/11/2022 14:30, Robert Foss wrote:
>> The sc7280_pp declaration is not located by the other _pp
>> declarations, but rather hidden around the _merge_3d
>> declarations. Let's fix this to avoid confusion.
>>
>> Signed-off-by: Robert Foss <robert.foss@linaro.org>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>> ---
> This is already merged.
>
> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=1a5b5372e3b0a4cc65a0cbb724b1b0859f4ac63c
>
>
> Konrad
Its part of linux-next but a PR hasnt been sent with it.
That being said, since this particular change has been taken separately,
this series should now be rebased without this change and addressing
some of the other comments given by konrad.
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 14 +++++++-------
>> 1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> index 4dac90ee5b8a..8f2d634f7b6b 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> @@ -1294,6 +1294,13 @@ static const struct dpu_pingpong_cfg
>> sm8150_pp[] = {
>> -1),
>> };
>> +static const struct dpu_pingpong_cfg sc7280_pp[] = {
>> + PP_BLK("pingpong_0", PINGPONG_0, 0x59000, 0, sc7280_pp_sblk, -1,
>> -1),
>> + PP_BLK("pingpong_1", PINGPONG_1, 0x6a000, 0, sc7280_pp_sblk, -1,
>> -1),
>> + PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, 0, sc7280_pp_sblk, -1,
>> -1),
>> + PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1,
>> -1),
>> +};
>> +
>> static struct dpu_pingpong_cfg qcm2290_pp[] = {
>> PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, sdm845_pp_sblk,
>> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
>> @@ -1352,13 +1359,6 @@ static const struct dpu_merge_3d_cfg
>> sm8450_merge_3d[] = {
>> MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x65f00),
>> };
>> -static const struct dpu_pingpong_cfg sc7280_pp[] = {
>> - PP_BLK("pingpong_0", PINGPONG_0, 0x59000, 0, sc7280_pp_sblk, -1,
>> -1),
>> - PP_BLK("pingpong_1", PINGPONG_1, 0x6a000, 0, sc7280_pp_sblk, -1,
>> -1),
>> - PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, 0, sc7280_pp_sblk, -1,
>> -1),
>> - PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1,
>> -1),
>> -};
>> -
>> /*************************************************************
>> * DSC sub blocks config
>> *************************************************************/
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [Freedreno] [PATCH v2 03/12] drm/msm/dpu: Refactor sc7280_pp location
2022-11-15 13:30 ` [PATCH v2 03/12] drm/msm/dpu: Refactor sc7280_pp location Robert Foss
2022-11-15 13:33 ` Konrad Dybcio
@ 2022-11-17 13:37 ` Abhinav Kumar
1 sibling, 0 replies; 34+ messages in thread
From: Abhinav Kumar @ 2022-11-17 13:37 UTC (permalink / raw)
To: Robert Foss, robdclark, dmitry.baryshkov, sean, airlied, daniel,
robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, angelogioacchino.delregno,
loic.poulain, quic_khsieh, quic_vpolimer, vkoul, dianders,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Jonathan Marek, vinod.koul, quic_jesszhan, andersson
On 11/15/2022 5:30 AM, Robert Foss wrote:
> The sc7280_pp declaration is not located by the other _pp
> declarations, but rather hidden around the _merge_3d
> declarations. Let's fix this to avoid confusion.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 4dac90ee5b8a..8f2d634f7b6b 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -1294,6 +1294,13 @@ static const struct dpu_pingpong_cfg sm8150_pp[] = {
> -1),
> };
>
> +static const struct dpu_pingpong_cfg sc7280_pp[] = {
> + PP_BLK("pingpong_0", PINGPONG_0, 0x59000, 0, sc7280_pp_sblk, -1, -1),
> + PP_BLK("pingpong_1", PINGPONG_1, 0x6a000, 0, sc7280_pp_sblk, -1, -1),
> + PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, 0, sc7280_pp_sblk, -1, -1),
> + PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
> +};
> +
> static struct dpu_pingpong_cfg qcm2290_pp[] = {
> PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, sdm845_pp_sblk,
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> @@ -1352,13 +1359,6 @@ static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = {
> MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x65f00),
> };
>
> -static const struct dpu_pingpong_cfg sc7280_pp[] = {
> - PP_BLK("pingpong_0", PINGPONG_0, 0x59000, 0, sc7280_pp_sblk, -1, -1),
> - PP_BLK("pingpong_1", PINGPONG_1, 0x6a000, 0, sc7280_pp_sblk, -1, -1),
> - PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, 0, sc7280_pp_sblk, -1, -1),
> - PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
> -};
> -
> /*************************************************************
> * DSC sub blocks config
> *************************************************************/
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v2 04/12] drm/msm/dpu: Add SM8350 to hw catalog
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
` (2 preceding siblings ...)
2022-11-15 13:30 ` [PATCH v2 03/12] drm/msm/dpu: Refactor sc7280_pp location Robert Foss
@ 2022-11-15 13:30 ` Robert Foss
2022-11-15 13:40 ` Konrad Dybcio
2022-11-15 13:30 ` [PATCH v2 05/12] drm/msm/dpu: Add support for SM8350 Robert Foss
` (8 subsequent siblings)
12 siblings, 1 reply; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:30 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
Add compatibility for SM8350 display subsystem, including
required entries in DPU hw catalog.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 196 ++++++++++++++++++
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
2 files changed, 197 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 8f2d634f7b6b..e21ef7d912a0 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -112,6 +112,15 @@
BIT(MDP_INTF3_INTR) | \
BIT(MDP_INTF4_INTR))
+#define IRQ_SM8350_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
+ BIT(MDP_SSPP_TOP0_INTR2) | \
+ BIT(MDP_SSPP_TOP0_HIST_INTR) | \
+ BIT(MDP_INTF0_7xxx_INTR) | \
+ BIT(MDP_INTF1_7xxx_INTR) | \
+ BIT(MDP_INTF2_7xxx_INTR) | \
+ BIT(MDP_INTF3_7xxx_INTR) | \
+ 0)
+
#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
BIT(MDP_SSPP_TOP0_INTR2) | \
BIT(MDP_SSPP_TOP0_HIST_INTR) | \
@@ -375,6 +384,20 @@ static const struct dpu_caps sm8250_dpu_caps = {
.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
};
+static const struct dpu_caps sm8350_dpu_caps = {
+ .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .max_mixer_blendstages = 0xb,
+ .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
+ .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
+ .ubwc_version = DPU_HW_UBWC_VER_40,
+ .has_src_split = true,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+ .has_3d_merge = true,
+ .max_linewidth = 4096,
+ .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
static const struct dpu_caps sm8450_dpu_caps = {
.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
.max_mixer_blendstages = 0xb,
@@ -526,6 +549,33 @@ static const struct dpu_mdp_cfg sm8250_mdp[] = {
},
};
+static const struct dpu_mdp_cfg sm8350_mdp[] = {
+ {
+ .name = "top_0", .id = MDP_TOP,
+ .base = 0x0, .len = 0x494,
+ .features = 0,
+ .highest_bank_bit = 0x3, /* TODO: 2 for LP_DDR4 */
+ .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
+ .reg_off = 0x2AC, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
+ .reg_off = 0x2B4, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
+ .reg_off = 0x2BC, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
+ .reg_off = 0x2C4, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
+ .reg_off = 0x2AC, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
+ .reg_off = 0x2B4, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
+ .reg_off = 0x2BC, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
+ .reg_off = 0x2C4, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
+ .reg_off = 0x2BC, .bit_off = 20},
+ },
+};
+
static const struct dpu_mdp_cfg sm8450_mdp[] = {
{
.name = "top_0", .id = MDP_TOP,
@@ -711,6 +761,45 @@ static const struct dpu_ctl_cfg sm8150_ctl[] = {
},
};
+static const struct dpu_ctl_cfg sm8350_ctl[] = {
+ {
+ .name = "ctl_0", .id = CTL_0,
+ .base = 0x15000, .len = 0x1e8,
+ .features = BIT(DPU_CTL_SPLIT_DISPLAY) | CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+ },
+ {
+ .name = "ctl_1", .id = CTL_1,
+ .base = 0x16000, .len = 0x1e8,
+ .features = BIT(DPU_CTL_SPLIT_DISPLAY) | CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+ },
+ {
+ .name = "ctl_2", .id = CTL_2,
+ .base = 0x17000, .len = 0x1e8,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+ },
+ {
+ .name = "ctl_3", .id = CTL_3,
+ .base = 0x18000, .len = 0x1e8,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+ },
+ {
+ .name = "ctl_4", .id = CTL_4,
+ .base = 0x19000, .len = 0x1e8,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+ },
+ {
+ .name = "ctl_5", .id = CTL_5,
+ .base = 0x1a000, .len = 0x1e8,
+ .features = CTL_SC7280_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+ },
+};
+
static const struct dpu_ctl_cfg sm8450_ctl[] = {
{
.name = "ctl_0", .id = CTL_0,
@@ -1301,6 +1390,27 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = {
PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
};
+static const struct dpu_pingpong_cfg sm8350_pp[] = {
+ PP_BLK_TE("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12)),
+ PP_BLK_TE("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sdm845_pp_sblk_te,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13)),
+ PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sdm845_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 14)),
+ PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sdm845_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 15)),
+ PP_BLK("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sdm845_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30),
+ -1),
+ PP_BLK("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sdm845_pp_sblk,
+ DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31),
+ -1),
+};
+
static struct dpu_pingpong_cfg qcm2290_pp[] = {
PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, sdm845_pp_sblk,
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
@@ -1352,6 +1462,12 @@ static const struct dpu_merge_3d_cfg sm8150_merge_3d[] = {
MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x83200),
};
+static const struct dpu_merge_3d_cfg sm8350_merge_3d[] = {
+ MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
+ MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
+ MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
+};
+
static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = {
MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
@@ -1376,6 +1492,12 @@ static struct dpu_dsc_cfg sdm845_dsc[] = {
DSC_BLK("dsc_3", DSC_3, 0x80c00),
};
+static struct dpu_dsc_cfg sm8350_dsc[] = {
+ DSC_BLK("dsc_0", DSC_0, 0x80000),
+ DSC_BLK("dsc_1", DSC_1, 0x81000),
+ DSC_BLK("dsc_2", DSC_2, 0x82000),
+};
+
/*************************************************************
* INTF sub blocks config
*************************************************************/
@@ -1423,6 +1545,13 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
};
+static const struct dpu_intf_cfg sm8350_intf[] = {
+ INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
+ INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
+ INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
+ INTF_BLK("intf_3", INTF_3, 0x37000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
+};
+
static const struct dpu_intf_cfg sc8180x_intf[] = {
INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
@@ -1558,6 +1687,14 @@ static const struct dpu_reg_dma_cfg sm8250_regdma = {
.clk_ctrl = DPU_CLK_CTRL_REG_DMA,
};
+static const struct dpu_reg_dma_cfg sm8350_regdma = {
+ .base = 0x0,
+ .version = 0x00020000,
+ .trigger_sel_off = 0x119c,
+ .xin_id = 7,
+ .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
+};
+
static const struct dpu_reg_dma_cfg sm8450_regdma = {
.base = 0x0,
.version = 0x00020000,
@@ -1899,6 +2036,36 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
.bw_inefficiency_factor = 120,
};
+static const struct dpu_perf_cfg sm8350_perf_data = {
+ .max_bw_low = 11800000,
+ .max_bw_high = 18200000,
+ .min_core_ib = 2500000,
+ .min_llcc_ib = 0,
+ .min_dram_ib = 800000,
+ .min_prefill_lines = 40,
+ /* FIXME: lut tables */
+ .danger_lut_tbl = {0x3ffff, 0x3ffff, 0x0},
+ .safe_lut_tbl = {0xfe00, 0xfe00, 0xffff},
+ .qos_lut_tbl = {
+ {.nentry = ARRAY_SIZE(sc7180_qos_linear),
+ .entries = sc7180_qos_linear
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+ .entries = sc7180_qos_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+ .entries = sc7180_qos_nrt
+ },
+ /* TODO: macrotile-qseed is different from macrotile */
+ },
+ .cdp_cfg = {
+ {.rd_enable = 1, .wr_enable = 1},
+ {.rd_enable = 1, .wr_enable = 0}
+ },
+ .clk_inefficiency_factor = 105,
+ .bw_inefficiency_factor = 120,
+};
+
static const struct dpu_perf_cfg qcm2290_perf_data = {
.max_bw_low = 2700000,
.max_bw_high = 2700000,
@@ -2075,6 +2242,34 @@ static const struct dpu_mdss_cfg sm8250_dpu_cfg = {
.mdss_irqs = IRQ_SM8250_MASK,
};
+static const struct dpu_mdss_cfg sm8350_dpu_cfg = {
+ .caps = &sm8350_dpu_caps,
+ .mdp_count = ARRAY_SIZE(sm8350_mdp),
+ .mdp = sm8350_mdp,
+ .ctl_count = ARRAY_SIZE(sm8350_ctl),
+ .ctl = sm8350_ctl,
+ .sspp_count = ARRAY_SIZE(sm8250_sspp),
+ .sspp = sm8250_sspp,
+ .mixer_count = ARRAY_SIZE(sm8150_lm),
+ .mixer = sm8150_lm,
+ .dspp_count = ARRAY_SIZE(sm8150_dspp),
+ .dspp = sm8150_dspp,
+ .pingpong_count = ARRAY_SIZE(sm8350_pp),
+ .pingpong = sm8350_pp,
+ .dsc_count = ARRAY_SIZE(sm8350_dsc),
+ .dsc = sm8350_dsc,
+ .merge_3d_count = ARRAY_SIZE(sm8350_merge_3d),
+ .merge_3d = sm8350_merge_3d,
+ .intf_count = ARRAY_SIZE(sm8350_intf),
+ .intf = sm8350_intf,
+ .vbif_count = ARRAY_SIZE(sdm845_vbif),
+ .vbif = sdm845_vbif,
+ .reg_dma_count = 1,
+ .dma_cfg = &sm8250_regdma,
+ .perf = &sm8350_perf_data,
+ .mdss_irqs = IRQ_SM8350_MASK,
+};
+
static const struct dpu_mdss_cfg sm8450_dpu_cfg = {
.caps = &sm8450_dpu_caps,
.mdp_count = ARRAY_SIZE(sm8450_mdp),
@@ -2158,6 +2353,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
{ .hw_rev = DPU_HW_VER_600, .dpu_cfg = &sm8250_dpu_cfg},
{ .hw_rev = DPU_HW_VER_620, .dpu_cfg = &sc7180_dpu_cfg},
{ .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
+ { .hw_rev = DPU_HW_VER_700, .dpu_cfg = &sm8350_dpu_cfg},
{ .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
{ .hw_rev = DPU_HW_VER_810, .dpu_cfg = &sm8450_dpu_cfg},
};
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 664c4876f44a..5335123a0289 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -45,6 +45,7 @@
#define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
#define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
#define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
+#define DPU_HW_VER_700 DPU_HW_VER(7, 0, 0) /* sm8350 */
#define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
#define DPU_HW_VER_810 DPU_HW_VER(8, 1, 0) /* sm8450 */
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [PATCH v2 04/12] drm/msm/dpu: Add SM8350 to hw catalog
2022-11-15 13:30 ` [PATCH v2 04/12] drm/msm/dpu: Add SM8350 to hw catalog Robert Foss
@ 2022-11-15 13:40 ` Konrad Dybcio
2022-11-29 11:48 ` Robert Foss
0 siblings, 1 reply; 34+ messages in thread
From: Konrad Dybcio @ 2022-11-15 13:40 UTC (permalink / raw)
To: Robert Foss, robdclark, quic_abhinavk, dmitry.baryshkov, sean,
airlied, daniel, robh+dt, krzysztof.kozlowski+dt, agross,
bjorn.andersson, quic_kalyant, swboyd, angelogioacchino.delregno,
loic.poulain, quic_khsieh, quic_vpolimer, vkoul, dianders,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Jonathan Marek, vinod.koul, quic_jesszhan, andersson
On 15/11/2022 14:30, Robert Foss wrote:
> Add compatibility for SM8350 display subsystem, including
> required entries in DPU hw catalog.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 196 ++++++++++++++++++
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
> 2 files changed, 197 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 8f2d634f7b6b..e21ef7d912a0 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -112,6 +112,15 @@
> BIT(MDP_INTF3_INTR) | \
> BIT(MDP_INTF4_INTR))
>
> +#define IRQ_SM8350_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> + BIT(MDP_SSPP_TOP0_INTR2) | \
> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> + BIT(MDP_INTF0_7xxx_INTR) | \
> + BIT(MDP_INTF1_7xxx_INTR) | \
> + BIT(MDP_INTF2_7xxx_INTR) | \
> + BIT(MDP_INTF3_7xxx_INTR) | \
> + 0)
> +
> #define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> BIT(MDP_SSPP_TOP0_INTR2) | \
> BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> @@ -375,6 +384,20 @@ static const struct dpu_caps sm8250_dpu_caps = {
> .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> };
>
> +static const struct dpu_caps sm8350_dpu_caps = {
> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> + .max_mixer_blendstages = 0xb,
> + .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
> + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> + .ubwc_version = DPU_HW_UBWC_VER_40,
> + .has_src_split = true,
> + .has_dim_layer = true,
> + .has_idle_pc = true,
> + .has_3d_merge = true,
> + .max_linewidth = 4096,
> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> +};
> +
> static const struct dpu_caps sm8450_dpu_caps = {
> .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> .max_mixer_blendstages = 0xb,
> @@ -526,6 +549,33 @@ static const struct dpu_mdp_cfg sm8250_mdp[] = {
> },
> };
>
> +static const struct dpu_mdp_cfg sm8350_mdp[] = {
> + {
> + .name = "top_0", .id = MDP_TOP,
> + .base = 0x0, .len = 0x494,
> + .features = 0,
> + .highest_bank_bit = 0x3, /* TODO: 2 for LP_DDR4 */
> + .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> + .reg_off = 0x2AC, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
> + .reg_off = 0x2B4, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
> + .reg_off = 0x2BC, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
> + .reg_off = 0x2C4, .bit_off = 0},
> + .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> + .reg_off = 0x2AC, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> + .reg_off = 0x2B4, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> + .reg_off = 0x2BC, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> + .reg_off = 0x2C4, .bit_off = 8},
> + .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
> + .reg_off = 0x2BC, .bit_off = 20},
> + },
Let's try not adding more uppercase hex.
> +};
> +
> static const struct dpu_mdp_cfg sm8450_mdp[] = {
> {
> .name = "top_0", .id = MDP_TOP,
> @@ -711,6 +761,45 @@ static const struct dpu_ctl_cfg sm8150_ctl[] = {
> },
> };
>
> +static const struct dpu_ctl_cfg sm8350_ctl[] = {
> + {
> + .name = "ctl_0", .id = CTL_0,
> + .base = 0x15000, .len = 0x1e8,
> + .features = BIT(DPU_CTL_SPLIT_DISPLAY) | CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
> + },
> + {
> + .name = "ctl_1", .id = CTL_1,
> + .base = 0x16000, .len = 0x1e8,
> + .features = BIT(DPU_CTL_SPLIT_DISPLAY) | CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
> + },
> + {
> + .name = "ctl_2", .id = CTL_2,
> + .base = 0x17000, .len = 0x1e8,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
> + },
> + {
> + .name = "ctl_3", .id = CTL_3,
> + .base = 0x18000, .len = 0x1e8,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
> + },
> + {
> + .name = "ctl_4", .id = CTL_4,
> + .base = 0x19000, .len = 0x1e8,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
> + },
> + {
> + .name = "ctl_5", .id = CTL_5,
> + .base = 0x1a000, .len = 0x1e8,
> + .features = CTL_SC7280_MASK,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
> + },
> +};
> +
> static const struct dpu_ctl_cfg sm8450_ctl[] = {
> {
> .name = "ctl_0", .id = CTL_0,
> @@ -1301,6 +1390,27 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = {
> PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
> };
>
> +static const struct dpu_pingpong_cfg sm8350_pp[] = {
> + PP_BLK_TE("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12)),
> + PP_BLK_TE("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sdm845_pp_sblk_te,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13)),
> + PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sdm845_pp_sblk,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 14)),
> + PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sdm845_pp_sblk,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 15)),
> + PP_BLK("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sdm845_pp_sblk,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30),
> + -1),
> + PP_BLK("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sdm845_pp_sblk,
> + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31),
> + -1),
> +};
> +
> static struct dpu_pingpong_cfg qcm2290_pp[] = {
> PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, sdm845_pp_sblk,
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> @@ -1352,6 +1462,12 @@ static const struct dpu_merge_3d_cfg sm8150_merge_3d[] = {
> MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x83200),
> };
>
> +static const struct dpu_merge_3d_cfg sm8350_merge_3d[] = {
> + MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
> + MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
> + MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
> +};
> +
> static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = {
> MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
> MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
> @@ -1376,6 +1492,12 @@ static struct dpu_dsc_cfg sdm845_dsc[] = {
> DSC_BLK("dsc_3", DSC_3, 0x80c00),
> };
>
> +static struct dpu_dsc_cfg sm8350_dsc[] = {
> + DSC_BLK("dsc_0", DSC_0, 0x80000),
> + DSC_BLK("dsc_1", DSC_1, 0x81000),
> + DSC_BLK("dsc_2", DSC_2, 0x82000),
> +};
> +
> /*************************************************************
> * INTF sub blocks config
> *************************************************************/
> @@ -1423,6 +1545,13 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
> INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> };
>
> +static const struct dpu_intf_cfg sm8350_intf[] = {
> + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> + INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> + INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
> + INTF_BLK("intf_3", INTF_3, 0x37000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
> +};
> +
> static const struct dpu_intf_cfg sc8180x_intf[] = {
> INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> @@ -1558,6 +1687,14 @@ static const struct dpu_reg_dma_cfg sm8250_regdma = {
> .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
> };
>
> +static const struct dpu_reg_dma_cfg sm8350_regdma = {
> + .base = 0x0,
qcom,sde-reg-dma-off = <0 0x400>;
> + .version = 0x00020000,
> + .trigger_sel_off = 0x119c,
> + .xin_id = 7,
> + .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
> +};
> +
> static const struct dpu_reg_dma_cfg sm8450_regdma = {
> .base = 0x0,
> .version = 0x00020000,
> @@ -1899,6 +2036,36 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
> .bw_inefficiency_factor = 120,
> };
>
> +static const struct dpu_perf_cfg sm8350_perf_data = {
> + .max_bw_low = 11800000,
> + .max_bw_high = 18200000,
qcom,sde-max-bw-high-kbps = <15500000>;
I think the rest looks good.
Konrad
> + .min_core_ib = 2500000,
> + .min_llcc_ib = 0,
> + .min_dram_ib = 800000,
> + .min_prefill_lines = 40,
> + /* FIXME: lut tables */
> + .danger_lut_tbl = {0x3ffff, 0x3ffff, 0x0},
> + .safe_lut_tbl = {0xfe00, 0xfe00, 0xffff},
> + .qos_lut_tbl = {
> + {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> + .entries = sc7180_qos_linear
> + },
> + {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
> + .entries = sc7180_qos_macrotile
> + },
> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> + .entries = sc7180_qos_nrt
> + },
> + /* TODO: macrotile-qseed is different from macrotile */
> + },
> + .cdp_cfg = {
> + {.rd_enable = 1, .wr_enable = 1},
> + {.rd_enable = 1, .wr_enable = 0}
> + },
> + .clk_inefficiency_factor = 105,
> + .bw_inefficiency_factor = 120,
> +};
> +
> static const struct dpu_perf_cfg qcm2290_perf_data = {
> .max_bw_low = 2700000,
> .max_bw_high = 2700000,
> @@ -2075,6 +2242,34 @@ static const struct dpu_mdss_cfg sm8250_dpu_cfg = {
> .mdss_irqs = IRQ_SM8250_MASK,
> };
>
> +static const struct dpu_mdss_cfg sm8350_dpu_cfg = {
> + .caps = &sm8350_dpu_caps,
> + .mdp_count = ARRAY_SIZE(sm8350_mdp),
> + .mdp = sm8350_mdp,
> + .ctl_count = ARRAY_SIZE(sm8350_ctl),
> + .ctl = sm8350_ctl,
> + .sspp_count = ARRAY_SIZE(sm8250_sspp),
> + .sspp = sm8250_sspp,
> + .mixer_count = ARRAY_SIZE(sm8150_lm),
> + .mixer = sm8150_lm,
> + .dspp_count = ARRAY_SIZE(sm8150_dspp),
> + .dspp = sm8150_dspp,
> + .pingpong_count = ARRAY_SIZE(sm8350_pp),
> + .pingpong = sm8350_pp,
> + .dsc_count = ARRAY_SIZE(sm8350_dsc),
> + .dsc = sm8350_dsc,
> + .merge_3d_count = ARRAY_SIZE(sm8350_merge_3d),
> + .merge_3d = sm8350_merge_3d,
> + .intf_count = ARRAY_SIZE(sm8350_intf),
> + .intf = sm8350_intf,
> + .vbif_count = ARRAY_SIZE(sdm845_vbif),
> + .vbif = sdm845_vbif,
> + .reg_dma_count = 1,
> + .dma_cfg = &sm8250_regdma,
> + .perf = &sm8350_perf_data,
> + .mdss_irqs = IRQ_SM8350_MASK,
> +};
> +
> static const struct dpu_mdss_cfg sm8450_dpu_cfg = {
> .caps = &sm8450_dpu_caps,
> .mdp_count = ARRAY_SIZE(sm8450_mdp),
> @@ -2158,6 +2353,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
> { .hw_rev = DPU_HW_VER_600, .dpu_cfg = &sm8250_dpu_cfg},
> { .hw_rev = DPU_HW_VER_620, .dpu_cfg = &sc7180_dpu_cfg},
> { .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
> + { .hw_rev = DPU_HW_VER_700, .dpu_cfg = &sm8350_dpu_cfg},
> { .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
> { .hw_rev = DPU_HW_VER_810, .dpu_cfg = &sm8450_dpu_cfg},
> };
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 664c4876f44a..5335123a0289 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -45,6 +45,7 @@
> #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
> #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
> #define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
> +#define DPU_HW_VER_700 DPU_HW_VER(7, 0, 0) /* sm8350 */
> #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
> #define DPU_HW_VER_810 DPU_HW_VER(8, 1, 0) /* sm8450 */
>
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [PATCH v2 04/12] drm/msm/dpu: Add SM8350 to hw catalog
2022-11-15 13:40 ` Konrad Dybcio
@ 2022-11-29 11:48 ` Robert Foss
0 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-29 11:48 UTC (permalink / raw)
To: Konrad Dybcio
Cc: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
quic_kalyant, swboyd, angelogioacchino.delregno, loic.poulain,
quic_khsieh, quic_vpolimer, vkoul, dianders, linux-arm-msm,
dri-devel, freedreno, devicetree, linux-kernel, Jonathan Marek,
vinod.koul, quic_jesszhan, andersson
On Tue, 15 Nov 2022 at 14:40, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
>
>
> On 15/11/2022 14:30, Robert Foss wrote:
> > Add compatibility for SM8350 display subsystem, including
> > required entries in DPU hw catalog.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 196 ++++++++++++++++++
> > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
> > 2 files changed, 197 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > index 8f2d634f7b6b..e21ef7d912a0 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > @@ -112,6 +112,15 @@
> > BIT(MDP_INTF3_INTR) | \
> > BIT(MDP_INTF4_INTR))
> >
> > +#define IRQ_SM8350_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> > + BIT(MDP_SSPP_TOP0_INTR2) | \
> > + BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> > + BIT(MDP_INTF0_7xxx_INTR) | \
> > + BIT(MDP_INTF1_7xxx_INTR) | \
> > + BIT(MDP_INTF2_7xxx_INTR) | \
> > + BIT(MDP_INTF3_7xxx_INTR) | \
> > + 0)
> > +
> > #define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> > BIT(MDP_SSPP_TOP0_INTR2) | \
> > BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> > @@ -375,6 +384,20 @@ static const struct dpu_caps sm8250_dpu_caps = {
> > .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> > };
> >
> > +static const struct dpu_caps sm8350_dpu_caps = {
> > + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> > + .max_mixer_blendstages = 0xb,
> > + .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
> > + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> > + .ubwc_version = DPU_HW_UBWC_VER_40,
> > + .has_src_split = true,
> > + .has_dim_layer = true,
> > + .has_idle_pc = true,
> > + .has_3d_merge = true,
> > + .max_linewidth = 4096,
> > + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> > +};
> > +
> > static const struct dpu_caps sm8450_dpu_caps = {
> > .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> > .max_mixer_blendstages = 0xb,
> > @@ -526,6 +549,33 @@ static const struct dpu_mdp_cfg sm8250_mdp[] = {
> > },
> > };
> >
> > +static const struct dpu_mdp_cfg sm8350_mdp[] = {
> > + {
> > + .name = "top_0", .id = MDP_TOP,
> > + .base = 0x0, .len = 0x494,
> > + .features = 0,
> > + .highest_bank_bit = 0x3, /* TODO: 2 for LP_DDR4 */
> > + .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> > + .reg_off = 0x2AC, .bit_off = 0},
> > + .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
> > + .reg_off = 0x2B4, .bit_off = 0},
> > + .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
> > + .reg_off = 0x2BC, .bit_off = 0},
> > + .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
> > + .reg_off = 0x2C4, .bit_off = 0},
> > + .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> > + .reg_off = 0x2AC, .bit_off = 8},
> > + .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> > + .reg_off = 0x2B4, .bit_off = 8},
> > + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> > + .reg_off = 0x2BC, .bit_off = 8},
> > + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> > + .reg_off = 0x2C4, .bit_off = 8},
> > + .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
> > + .reg_off = 0x2BC, .bit_off = 20},
> > + },
> Let's try not adding more uppercase hex.
Ack
>
> > +};
> > +
> > static const struct dpu_mdp_cfg sm8450_mdp[] = {
> > {
> > .name = "top_0", .id = MDP_TOP,
> > @@ -711,6 +761,45 @@ static const struct dpu_ctl_cfg sm8150_ctl[] = {
> > },
> > };
> >
> > +static const struct dpu_ctl_cfg sm8350_ctl[] = {
> > + {
> > + .name = "ctl_0", .id = CTL_0,
> > + .base = 0x15000, .len = 0x1e8,
> > + .features = BIT(DPU_CTL_SPLIT_DISPLAY) | CTL_SC7280_MASK,
> > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
> > + },
> > + {
> > + .name = "ctl_1", .id = CTL_1,
> > + .base = 0x16000, .len = 0x1e8,
> > + .features = BIT(DPU_CTL_SPLIT_DISPLAY) | CTL_SC7280_MASK,
> > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
> > + },
> > + {
> > + .name = "ctl_2", .id = CTL_2,
> > + .base = 0x17000, .len = 0x1e8,
> > + .features = CTL_SC7280_MASK,
> > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
> > + },
> > + {
> > + .name = "ctl_3", .id = CTL_3,
> > + .base = 0x18000, .len = 0x1e8,
> > + .features = CTL_SC7280_MASK,
> > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
> > + },
> > + {
> > + .name = "ctl_4", .id = CTL_4,
> > + .base = 0x19000, .len = 0x1e8,
> > + .features = CTL_SC7280_MASK,
> > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
> > + },
> > + {
> > + .name = "ctl_5", .id = CTL_5,
> > + .base = 0x1a000, .len = 0x1e8,
> > + .features = CTL_SC7280_MASK,
> > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
> > + },
> > +};
> > +
> > static const struct dpu_ctl_cfg sm8450_ctl[] = {
> > {
> > .name = "ctl_0", .id = CTL_0,
> > @@ -1301,6 +1390,27 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = {
> > PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
> > };
> >
> > +static const struct dpu_pingpong_cfg sm8350_pp[] = {
> > + PP_BLK_TE("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sdm845_pp_sblk_te,
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12)),
> > + PP_BLK_TE("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sdm845_pp_sblk_te,
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13)),
> > + PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sdm845_pp_sblk,
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 14)),
> > + PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sdm845_pp_sblk,
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 15)),
> > + PP_BLK("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sdm845_pp_sblk,
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30),
> > + -1),
> > + PP_BLK("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sdm845_pp_sblk,
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31),
> > + -1),
> > +};
> > +
> > static struct dpu_pingpong_cfg qcm2290_pp[] = {
> > PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, sdm845_pp_sblk,
> > DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> > @@ -1352,6 +1462,12 @@ static const struct dpu_merge_3d_cfg sm8150_merge_3d[] = {
> > MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x83200),
> > };
> >
> > +static const struct dpu_merge_3d_cfg sm8350_merge_3d[] = {
> > + MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
> > + MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
> > + MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
> > +};
> > +
> > static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = {
> > MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
> > MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
> > @@ -1376,6 +1492,12 @@ static struct dpu_dsc_cfg sdm845_dsc[] = {
> > DSC_BLK("dsc_3", DSC_3, 0x80c00),
> > };
> >
> > +static struct dpu_dsc_cfg sm8350_dsc[] = {
> > + DSC_BLK("dsc_0", DSC_0, 0x80000),
> > + DSC_BLK("dsc_1", DSC_1, 0x81000),
> > + DSC_BLK("dsc_2", DSC_2, 0x82000),
> > +};
> > +
> > /*************************************************************
> > * INTF sub blocks config
> > *************************************************************/
> > @@ -1423,6 +1545,13 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
> > INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> > };
> >
> > +static const struct dpu_intf_cfg sm8350_intf[] = {
> > + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> > + INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> > + INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
> > + INTF_BLK("intf_3", INTF_3, 0x37000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
> > +};
> > +
> > static const struct dpu_intf_cfg sc8180x_intf[] = {
> > INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> > INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> > @@ -1558,6 +1687,14 @@ static const struct dpu_reg_dma_cfg sm8250_regdma = {
> > .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
> > };
> >
> > +static const struct dpu_reg_dma_cfg sm8350_regdma = {
> > + .base = 0x0,
> qcom,sde-reg-dma-off = <0 0x400>;
Ack
>
> > + .version = 0x00020000,
> > + .trigger_sel_off = 0x119c,
> > + .xin_id = 7,
> > + .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
> > +};
> > +
> > static const struct dpu_reg_dma_cfg sm8450_regdma = {
> > .base = 0x0,
> > .version = 0x00020000,
> > @@ -1899,6 +2036,36 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
> > .bw_inefficiency_factor = 120,
> > };
> >
> > +static const struct dpu_perf_cfg sm8350_perf_data = {
> > + .max_bw_low = 11800000,
> > + .max_bw_high = 18200000,
> qcom,sde-max-bw-high-kbps = <15500000>;
Ack
>
> I think the rest looks good.
Thanks for going through all of these values, and finding some issues.
>
> Konrad
> > + .min_core_ib = 2500000,
> > + .min_llcc_ib = 0,
> > + .min_dram_ib = 800000,
> > + .min_prefill_lines = 40,
> > + /* FIXME: lut tables */
> > + .danger_lut_tbl = {0x3ffff, 0x3ffff, 0x0},
> > + .safe_lut_tbl = {0xfe00, 0xfe00, 0xffff},
> > + .qos_lut_tbl = {
> > + {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> > + .entries = sc7180_qos_linear
> > + },
> > + {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
> > + .entries = sc7180_qos_macrotile
> > + },
> > + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> > + .entries = sc7180_qos_nrt
> > + },
> > + /* TODO: macrotile-qseed is different from macrotile */
> > + },
> > + .cdp_cfg = {
> > + {.rd_enable = 1, .wr_enable = 1},
> > + {.rd_enable = 1, .wr_enable = 0}
> > + },
> > + .clk_inefficiency_factor = 105,
> > + .bw_inefficiency_factor = 120,
> > +};
> > +
> > static const struct dpu_perf_cfg qcm2290_perf_data = {
> > .max_bw_low = 2700000,
> > .max_bw_high = 2700000,
> > @@ -2075,6 +2242,34 @@ static const struct dpu_mdss_cfg sm8250_dpu_cfg = {
> > .mdss_irqs = IRQ_SM8250_MASK,
> > };
> >
> > +static const struct dpu_mdss_cfg sm8350_dpu_cfg = {
> > + .caps = &sm8350_dpu_caps,
> > + .mdp_count = ARRAY_SIZE(sm8350_mdp),
> > + .mdp = sm8350_mdp,
> > + .ctl_count = ARRAY_SIZE(sm8350_ctl),
> > + .ctl = sm8350_ctl,
> > + .sspp_count = ARRAY_SIZE(sm8250_sspp),
> > + .sspp = sm8250_sspp,
> > + .mixer_count = ARRAY_SIZE(sm8150_lm),
> > + .mixer = sm8150_lm,
> > + .dspp_count = ARRAY_SIZE(sm8150_dspp),
> > + .dspp = sm8150_dspp,
> > + .pingpong_count = ARRAY_SIZE(sm8350_pp),
> > + .pingpong = sm8350_pp,
> > + .dsc_count = ARRAY_SIZE(sm8350_dsc),
> > + .dsc = sm8350_dsc,
> > + .merge_3d_count = ARRAY_SIZE(sm8350_merge_3d),
> > + .merge_3d = sm8350_merge_3d,
> > + .intf_count = ARRAY_SIZE(sm8350_intf),
> > + .intf = sm8350_intf,
> > + .vbif_count = ARRAY_SIZE(sdm845_vbif),
> > + .vbif = sdm845_vbif,
> > + .reg_dma_count = 1,
> > + .dma_cfg = &sm8250_regdma,
> > + .perf = &sm8350_perf_data,
> > + .mdss_irqs = IRQ_SM8350_MASK,
> > +};
> > +
> > static const struct dpu_mdss_cfg sm8450_dpu_cfg = {
> > .caps = &sm8450_dpu_caps,
> > .mdp_count = ARRAY_SIZE(sm8450_mdp),
> > @@ -2158,6 +2353,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
> > { .hw_rev = DPU_HW_VER_600, .dpu_cfg = &sm8250_dpu_cfg},
> > { .hw_rev = DPU_HW_VER_620, .dpu_cfg = &sc7180_dpu_cfg},
> > { .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
> > + { .hw_rev = DPU_HW_VER_700, .dpu_cfg = &sm8350_dpu_cfg},
> > { .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
> > { .hw_rev = DPU_HW_VER_810, .dpu_cfg = &sm8450_dpu_cfg},
> > };
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > index 664c4876f44a..5335123a0289 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > @@ -45,6 +45,7 @@
> > #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
> > #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
> > #define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
> > +#define DPU_HW_VER_700 DPU_HW_VER(7, 0, 0) /* sm8350 */
> > #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
> > #define DPU_HW_VER_810 DPU_HW_VER(8, 1, 0) /* sm8450 */
> >
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [PATCH v2 04/12] drm/msm/dpu: Add SM8350 to hw catalog
@ 2022-11-29 11:48 ` Robert Foss
0 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-29 11:48 UTC (permalink / raw)
To: Konrad Dybcio
Cc: airlied, dri-devel, bjorn.andersson, krzysztof.kozlowski+dt,
angelogioacchino.delregno, quic_vpolimer, vinod.koul,
Jonathan Marek, quic_khsieh, agross, quic_jesszhan, devicetree,
linux-arm-msm, quic_abhinavk, swboyd, robh+dt, sean,
quic_kalyant, loic.poulain, andersson, dianders, linux-kernel,
vkoul, dmitry.baryshkov, freedreno
On Tue, 15 Nov 2022 at 14:40, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
>
>
> On 15/11/2022 14:30, Robert Foss wrote:
> > Add compatibility for SM8350 display subsystem, including
> > required entries in DPU hw catalog.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 196 ++++++++++++++++++
> > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
> > 2 files changed, 197 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > index 8f2d634f7b6b..e21ef7d912a0 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > @@ -112,6 +112,15 @@
> > BIT(MDP_INTF3_INTR) | \
> > BIT(MDP_INTF4_INTR))
> >
> > +#define IRQ_SM8350_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> > + BIT(MDP_SSPP_TOP0_INTR2) | \
> > + BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> > + BIT(MDP_INTF0_7xxx_INTR) | \
> > + BIT(MDP_INTF1_7xxx_INTR) | \
> > + BIT(MDP_INTF2_7xxx_INTR) | \
> > + BIT(MDP_INTF3_7xxx_INTR) | \
> > + 0)
> > +
> > #define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> > BIT(MDP_SSPP_TOP0_INTR2) | \
> > BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> > @@ -375,6 +384,20 @@ static const struct dpu_caps sm8250_dpu_caps = {
> > .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> > };
> >
> > +static const struct dpu_caps sm8350_dpu_caps = {
> > + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> > + .max_mixer_blendstages = 0xb,
> > + .qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
> > + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> > + .ubwc_version = DPU_HW_UBWC_VER_40,
> > + .has_src_split = true,
> > + .has_dim_layer = true,
> > + .has_idle_pc = true,
> > + .has_3d_merge = true,
> > + .max_linewidth = 4096,
> > + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> > +};
> > +
> > static const struct dpu_caps sm8450_dpu_caps = {
> > .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> > .max_mixer_blendstages = 0xb,
> > @@ -526,6 +549,33 @@ static const struct dpu_mdp_cfg sm8250_mdp[] = {
> > },
> > };
> >
> > +static const struct dpu_mdp_cfg sm8350_mdp[] = {
> > + {
> > + .name = "top_0", .id = MDP_TOP,
> > + .base = 0x0, .len = 0x494,
> > + .features = 0,
> > + .highest_bank_bit = 0x3, /* TODO: 2 for LP_DDR4 */
> > + .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> > + .reg_off = 0x2AC, .bit_off = 0},
> > + .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
> > + .reg_off = 0x2B4, .bit_off = 0},
> > + .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
> > + .reg_off = 0x2BC, .bit_off = 0},
> > + .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
> > + .reg_off = 0x2C4, .bit_off = 0},
> > + .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> > + .reg_off = 0x2AC, .bit_off = 8},
> > + .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> > + .reg_off = 0x2B4, .bit_off = 8},
> > + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> > + .reg_off = 0x2BC, .bit_off = 8},
> > + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> > + .reg_off = 0x2C4, .bit_off = 8},
> > + .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
> > + .reg_off = 0x2BC, .bit_off = 20},
> > + },
> Let's try not adding more uppercase hex.
Ack
>
> > +};
> > +
> > static const struct dpu_mdp_cfg sm8450_mdp[] = {
> > {
> > .name = "top_0", .id = MDP_TOP,
> > @@ -711,6 +761,45 @@ static const struct dpu_ctl_cfg sm8150_ctl[] = {
> > },
> > };
> >
> > +static const struct dpu_ctl_cfg sm8350_ctl[] = {
> > + {
> > + .name = "ctl_0", .id = CTL_0,
> > + .base = 0x15000, .len = 0x1e8,
> > + .features = BIT(DPU_CTL_SPLIT_DISPLAY) | CTL_SC7280_MASK,
> > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
> > + },
> > + {
> > + .name = "ctl_1", .id = CTL_1,
> > + .base = 0x16000, .len = 0x1e8,
> > + .features = BIT(DPU_CTL_SPLIT_DISPLAY) | CTL_SC7280_MASK,
> > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
> > + },
> > + {
> > + .name = "ctl_2", .id = CTL_2,
> > + .base = 0x17000, .len = 0x1e8,
> > + .features = CTL_SC7280_MASK,
> > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
> > + },
> > + {
> > + .name = "ctl_3", .id = CTL_3,
> > + .base = 0x18000, .len = 0x1e8,
> > + .features = CTL_SC7280_MASK,
> > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
> > + },
> > + {
> > + .name = "ctl_4", .id = CTL_4,
> > + .base = 0x19000, .len = 0x1e8,
> > + .features = CTL_SC7280_MASK,
> > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
> > + },
> > + {
> > + .name = "ctl_5", .id = CTL_5,
> > + .base = 0x1a000, .len = 0x1e8,
> > + .features = CTL_SC7280_MASK,
> > + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
> > + },
> > +};
> > +
> > static const struct dpu_ctl_cfg sm8450_ctl[] = {
> > {
> > .name = "ctl_0", .id = CTL_0,
> > @@ -1301,6 +1390,27 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = {
> > PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
> > };
> >
> > +static const struct dpu_pingpong_cfg sm8350_pp[] = {
> > + PP_BLK_TE("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sdm845_pp_sblk_te,
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12)),
> > + PP_BLK_TE("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sdm845_pp_sblk_te,
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13)),
> > + PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sdm845_pp_sblk,
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 14)),
> > + PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sdm845_pp_sblk,
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 15)),
> > + PP_BLK("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sdm845_pp_sblk,
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30),
> > + -1),
> > + PP_BLK("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sdm845_pp_sblk,
> > + DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31),
> > + -1),
> > +};
> > +
> > static struct dpu_pingpong_cfg qcm2290_pp[] = {
> > PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, sdm845_pp_sblk,
> > DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> > @@ -1352,6 +1462,12 @@ static const struct dpu_merge_3d_cfg sm8150_merge_3d[] = {
> > MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x83200),
> > };
> >
> > +static const struct dpu_merge_3d_cfg sm8350_merge_3d[] = {
> > + MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
> > + MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
> > + MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
> > +};
> > +
> > static const struct dpu_merge_3d_cfg sm8450_merge_3d[] = {
> > MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
> > MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
> > @@ -1376,6 +1492,12 @@ static struct dpu_dsc_cfg sdm845_dsc[] = {
> > DSC_BLK("dsc_3", DSC_3, 0x80c00),
> > };
> >
> > +static struct dpu_dsc_cfg sm8350_dsc[] = {
> > + DSC_BLK("dsc_0", DSC_0, 0x80000),
> > + DSC_BLK("dsc_1", DSC_1, 0x81000),
> > + DSC_BLK("dsc_2", DSC_2, 0x82000),
> > +};
> > +
> > /*************************************************************
> > * INTF sub blocks config
> > *************************************************************/
> > @@ -1423,6 +1545,13 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
> > INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> > };
> >
> > +static const struct dpu_intf_cfg sm8350_intf[] = {
> > + INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> > + INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> > + INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
> > + INTF_BLK("intf_3", INTF_3, 0x37000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
> > +};
> > +
> > static const struct dpu_intf_cfg sc8180x_intf[] = {
> > INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> > INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> > @@ -1558,6 +1687,14 @@ static const struct dpu_reg_dma_cfg sm8250_regdma = {
> > .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
> > };
> >
> > +static const struct dpu_reg_dma_cfg sm8350_regdma = {
> > + .base = 0x0,
> qcom,sde-reg-dma-off = <0 0x400>;
Ack
>
> > + .version = 0x00020000,
> > + .trigger_sel_off = 0x119c,
> > + .xin_id = 7,
> > + .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
> > +};
> > +
> > static const struct dpu_reg_dma_cfg sm8450_regdma = {
> > .base = 0x0,
> > .version = 0x00020000,
> > @@ -1899,6 +2036,36 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
> > .bw_inefficiency_factor = 120,
> > };
> >
> > +static const struct dpu_perf_cfg sm8350_perf_data = {
> > + .max_bw_low = 11800000,
> > + .max_bw_high = 18200000,
> qcom,sde-max-bw-high-kbps = <15500000>;
Ack
>
> I think the rest looks good.
Thanks for going through all of these values, and finding some issues.
>
> Konrad
> > + .min_core_ib = 2500000,
> > + .min_llcc_ib = 0,
> > + .min_dram_ib = 800000,
> > + .min_prefill_lines = 40,
> > + /* FIXME: lut tables */
> > + .danger_lut_tbl = {0x3ffff, 0x3ffff, 0x0},
> > + .safe_lut_tbl = {0xfe00, 0xfe00, 0xffff},
> > + .qos_lut_tbl = {
> > + {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> > + .entries = sc7180_qos_linear
> > + },
> > + {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
> > + .entries = sc7180_qos_macrotile
> > + },
> > + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> > + .entries = sc7180_qos_nrt
> > + },
> > + /* TODO: macrotile-qseed is different from macrotile */
> > + },
> > + .cdp_cfg = {
> > + {.rd_enable = 1, .wr_enable = 1},
> > + {.rd_enable = 1, .wr_enable = 0}
> > + },
> > + .clk_inefficiency_factor = 105,
> > + .bw_inefficiency_factor = 120,
> > +};
> > +
> > static const struct dpu_perf_cfg qcm2290_perf_data = {
> > .max_bw_low = 2700000,
> > .max_bw_high = 2700000,
> > @@ -2075,6 +2242,34 @@ static const struct dpu_mdss_cfg sm8250_dpu_cfg = {
> > .mdss_irqs = IRQ_SM8250_MASK,
> > };
> >
> > +static const struct dpu_mdss_cfg sm8350_dpu_cfg = {
> > + .caps = &sm8350_dpu_caps,
> > + .mdp_count = ARRAY_SIZE(sm8350_mdp),
> > + .mdp = sm8350_mdp,
> > + .ctl_count = ARRAY_SIZE(sm8350_ctl),
> > + .ctl = sm8350_ctl,
> > + .sspp_count = ARRAY_SIZE(sm8250_sspp),
> > + .sspp = sm8250_sspp,
> > + .mixer_count = ARRAY_SIZE(sm8150_lm),
> > + .mixer = sm8150_lm,
> > + .dspp_count = ARRAY_SIZE(sm8150_dspp),
> > + .dspp = sm8150_dspp,
> > + .pingpong_count = ARRAY_SIZE(sm8350_pp),
> > + .pingpong = sm8350_pp,
> > + .dsc_count = ARRAY_SIZE(sm8350_dsc),
> > + .dsc = sm8350_dsc,
> > + .merge_3d_count = ARRAY_SIZE(sm8350_merge_3d),
> > + .merge_3d = sm8350_merge_3d,
> > + .intf_count = ARRAY_SIZE(sm8350_intf),
> > + .intf = sm8350_intf,
> > + .vbif_count = ARRAY_SIZE(sdm845_vbif),
> > + .vbif = sdm845_vbif,
> > + .reg_dma_count = 1,
> > + .dma_cfg = &sm8250_regdma,
> > + .perf = &sm8350_perf_data,
> > + .mdss_irqs = IRQ_SM8350_MASK,
> > +};
> > +
> > static const struct dpu_mdss_cfg sm8450_dpu_cfg = {
> > .caps = &sm8450_dpu_caps,
> > .mdp_count = ARRAY_SIZE(sm8450_mdp),
> > @@ -2158,6 +2353,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
> > { .hw_rev = DPU_HW_VER_600, .dpu_cfg = &sm8250_dpu_cfg},
> > { .hw_rev = DPU_HW_VER_620, .dpu_cfg = &sc7180_dpu_cfg},
> > { .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
> > + { .hw_rev = DPU_HW_VER_700, .dpu_cfg = &sm8350_dpu_cfg},
> > { .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
> > { .hw_rev = DPU_HW_VER_810, .dpu_cfg = &sm8450_dpu_cfg},
> > };
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > index 664c4876f44a..5335123a0289 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > @@ -45,6 +45,7 @@
> > #define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
> > #define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
> > #define DPU_HW_VER_650 DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
> > +#define DPU_HW_VER_700 DPU_HW_VER(7, 0, 0) /* sm8350 */
> > #define DPU_HW_VER_720 DPU_HW_VER(7, 2, 0) /* sc7280 */
> > #define DPU_HW_VER_810 DPU_HW_VER(8, 1, 0) /* sm8450 */
> >
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v2 05/12] drm/msm/dpu: Add support for SM8350
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
` (3 preceding siblings ...)
2022-11-15 13:30 ` [PATCH v2 04/12] drm/msm/dpu: Add SM8350 to hw catalog Robert Foss
@ 2022-11-15 13:30 ` Robert Foss
2022-11-15 13:30 ` [PATCH v2 06/12] drm/msm: " Robert Foss
` (7 subsequent siblings)
12 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:30 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
Add compatibles string, "qcom,sm8350-dpu", for the display processing unit
used on Qualcomm SM8350 platform.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 9827914dc096..6048bfae0824 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1322,6 +1322,7 @@ static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sc8180x-dpu", },
{ .compatible = "qcom,sm8150-dpu", },
{ .compatible = "qcom,sm8250-dpu", },
+ { .compatible = "qcom,sm8350-dpu", },
{ .compatible = "qcom,sm8450-dpu", },
{}
};
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH v2 06/12] drm/msm: Add support for SM8350
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
` (4 preceding siblings ...)
2022-11-15 13:30 ` [PATCH v2 05/12] drm/msm/dpu: Add support for SM8350 Robert Foss
@ 2022-11-15 13:30 ` Robert Foss
2022-11-15 13:42 ` Konrad Dybcio
2022-11-15 13:31 ` [PATCH v2 07/12] arm64: dts: qcom: sm8350: Add &tlmm gpio-line-names Robert Foss
` (6 subsequent siblings)
12 siblings, 1 reply; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:30 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
Add compatibles string, "qcom,sm8350-mdss", for the multimedia display
subsystem unit used on Qualcomm SM8350 platform.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
drivers/gpu/drm/msm/msm_mdss.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index a2264fb517a1..39746b972cdd 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -293,6 +293,9 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
/* UBWC_2_0 */
msm_mdss_setup_ubwc_dec_20(msm_mdss, 0x1e);
break;
+ case DPU_HW_VER_700:
+ msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_4_0, 6, 1, 1, 1);
+ break;
case DPU_HW_VER_720:
msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_3_0, 6, 1, 1, 1);
break;
@@ -530,6 +533,7 @@ static const struct of_device_id mdss_dt_match[] = {
{ .compatible = "qcom,sc8180x-mdss" },
{ .compatible = "qcom,sm8150-mdss" },
{ .compatible = "qcom,sm8250-mdss" },
+ { .compatible = "qcom,sm8350-mdss" },
{ .compatible = "qcom,sm8450-mdss" },
{}
};
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [PATCH v2 06/12] drm/msm: Add support for SM8350
2022-11-15 13:30 ` [PATCH v2 06/12] drm/msm: " Robert Foss
@ 2022-11-15 13:42 ` Konrad Dybcio
2022-11-29 11:40 ` Robert Foss
0 siblings, 1 reply; 34+ messages in thread
From: Konrad Dybcio @ 2022-11-15 13:42 UTC (permalink / raw)
To: Robert Foss, robdclark, quic_abhinavk, dmitry.baryshkov, sean,
airlied, daniel, robh+dt, krzysztof.kozlowski+dt, agross,
bjorn.andersson, quic_kalyant, swboyd, angelogioacchino.delregno,
loic.poulain, quic_khsieh, quic_vpolimer, vkoul, dianders,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Jonathan Marek, vinod.koul, quic_jesszhan, andersson
On 15/11/2022 14:30, Robert Foss wrote:
> Add compatibles string, "qcom,sm8350-mdss", for the multimedia display
> subsystem unit used on Qualcomm SM8350 platform.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
> drivers/gpu/drm/msm/msm_mdss.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
> index a2264fb517a1..39746b972cdd 100644
> --- a/drivers/gpu/drm/msm/msm_mdss.c
> +++ b/drivers/gpu/drm/msm/msm_mdss.c
> @@ -293,6 +293,9 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
> /* UBWC_2_0 */
> msm_mdss_setup_ubwc_dec_20(msm_mdss, 0x1e);
> break;
> + case DPU_HW_VER_700:
> + msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_4_0, 6, 1, 1, 1);
> + break;
Shouldn't the second-last argument be 2 or 3 depending on DDR type?
Konrad
> case DPU_HW_VER_720:
> msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_3_0, 6, 1, 1, 1);
> break;
> @@ -530,6 +533,7 @@ static const struct of_device_id mdss_dt_match[] = {
> { .compatible = "qcom,sc8180x-mdss" },
> { .compatible = "qcom,sm8150-mdss" },
> { .compatible = "qcom,sm8250-mdss" },
> + { .compatible = "qcom,sm8350-mdss" },
> { .compatible = "qcom,sm8450-mdss" },
> {}
> };
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [PATCH v2 06/12] drm/msm: Add support for SM8350
2022-11-15 13:42 ` Konrad Dybcio
@ 2022-11-29 11:40 ` Robert Foss
0 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-29 11:40 UTC (permalink / raw)
To: Konrad Dybcio, Dmitry Baryshkov
Cc: airlied, dri-devel, bjorn.andersson, krzysztof.kozlowski+dt,
angelogioacchino.delregno, quic_vpolimer, vinod.koul,
Jonathan Marek, quic_khsieh, agross, quic_jesszhan, devicetree,
linux-arm-msm, quic_abhinavk, swboyd, robh+dt, sean,
quic_kalyant, loic.poulain, andersson, dianders, linux-kernel,
vkoul, freedreno
On Tue, 15 Nov 2022 at 14:42, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
>
>
> On 15/11/2022 14:30, Robert Foss wrote:
> > Add compatibles string, "qcom,sm8350-mdss", for the multimedia display
> > subsystem unit used on Qualcomm SM8350 platform.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> > drivers/gpu/drm/msm/msm_mdss.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
> > index a2264fb517a1..39746b972cdd 100644
> > --- a/drivers/gpu/drm/msm/msm_mdss.c
> > +++ b/drivers/gpu/drm/msm/msm_mdss.c
> > @@ -293,6 +293,9 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
> > /* UBWC_2_0 */
> > msm_mdss_setup_ubwc_dec_20(msm_mdss, 0x1e);
> > break;
> > + case DPU_HW_VER_700:
> > + msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_4_0, 6, 1, 1, 1);
> > + break;
> Shouldn't the second-last argument be 2 or 3 depending on DDR type?
Dmitry, can I get your input on this? I'm a little bit unsure of which
dts properties some of these
values are derived from.
>
> Konrad
> > case DPU_HW_VER_720:
> > msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_3_0, 6, 1, 1, 1);
> > break;
> > @@ -530,6 +533,7 @@ static const struct of_device_id mdss_dt_match[] = {
> > { .compatible = "qcom,sc8180x-mdss" },
> > { .compatible = "qcom,sm8150-mdss" },
> > { .compatible = "qcom,sm8250-mdss" },
> > + { .compatible = "qcom,sm8350-mdss" },
> > { .compatible = "qcom,sm8450-mdss" },
> > {}
> > };
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [PATCH v2 06/12] drm/msm: Add support for SM8350
@ 2022-11-29 11:40 ` Robert Foss
0 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-29 11:40 UTC (permalink / raw)
To: Konrad Dybcio, Dmitry Baryshkov
Cc: robdclark, quic_abhinavk, sean, airlied, daniel, robh+dt,
krzysztof.kozlowski+dt, agross, bjorn.andersson, quic_kalyant,
swboyd, angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
On Tue, 15 Nov 2022 at 14:42, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
>
>
> On 15/11/2022 14:30, Robert Foss wrote:
> > Add compatibles string, "qcom,sm8350-mdss", for the multimedia display
> > subsystem unit used on Qualcomm SM8350 platform.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> > drivers/gpu/drm/msm/msm_mdss.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
> > index a2264fb517a1..39746b972cdd 100644
> > --- a/drivers/gpu/drm/msm/msm_mdss.c
> > +++ b/drivers/gpu/drm/msm/msm_mdss.c
> > @@ -293,6 +293,9 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
> > /* UBWC_2_0 */
> > msm_mdss_setup_ubwc_dec_20(msm_mdss, 0x1e);
> > break;
> > + case DPU_HW_VER_700:
> > + msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_4_0, 6, 1, 1, 1);
> > + break;
> Shouldn't the second-last argument be 2 or 3 depending on DDR type?
Dmitry, can I get your input on this? I'm a little bit unsure of which
dts properties some of these
values are derived from.
>
> Konrad
> > case DPU_HW_VER_720:
> > msm_mdss_setup_ubwc_dec_40(msm_mdss, UBWC_3_0, 6, 1, 1, 1);
> > break;
> > @@ -530,6 +533,7 @@ static const struct of_device_id mdss_dt_match[] = {
> > { .compatible = "qcom,sc8180x-mdss" },
> > { .compatible = "qcom,sm8150-mdss" },
> > { .compatible = "qcom,sm8250-mdss" },
> > + { .compatible = "qcom,sm8350-mdss" },
> > { .compatible = "qcom,sm8450-mdss" },
> > {}
> > };
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v2 07/12] arm64: dts: qcom: sm8350: Add &tlmm gpio-line-names
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
` (5 preceding siblings ...)
2022-11-15 13:30 ` [PATCH v2 06/12] drm/msm: " Robert Foss
@ 2022-11-15 13:31 ` Robert Foss
2022-11-15 13:31 ` [PATCH v2 08/12] arm64: dts: qcom: sm8350: Remove mmxc power-domain-name Robert Foss
` (5 subsequent siblings)
12 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:31 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
Add GPIO line names as described by the sm8350-hdk schematic.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 205 ++++++++++++++++++++++++
1 file changed, 205 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 0fcf5bd88fc7..e6deb08c6da0 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -233,6 +233,211 @@ &slpi {
&tlmm {
gpio-reserved-ranges = <52 8>;
+
+ gpio-line-names =
+ "APPS_I2C_SDA", /* GPIO_0 */
+ "APPS_I2C_SCL",
+ "FSA_INT_N",
+ "USER_LED3_EN",
+ "SMBUS_SDA_1P8",
+ "SMBUS_SCL_1P8",
+ "2M2_3P3_EN",
+ "ALERT_DUAL_M2_N",
+ "EXP_UART_CTS",
+ "EXP_UART_RFR",
+ "EXP_UART_TX", /* GPIO_10 */
+ "EXP_UART_RX",
+ "NC",
+ "NC",
+ "RCM_MARKER1",
+ "WSA0_EN",
+ "CAM1_RESET_N",
+ "CAM0_RESET_N",
+ "DEBUG_UART_TX",
+ "DEBUG_UART_RX",
+ "TS_I2C_SDA", /* GPIO_20 */
+ "TS_I2C_SCL",
+ "TS_RESET_N",
+ "TS_INT_N",
+ "DISP0_RESET_N",
+ "DISP1_RESET_N",
+ "ETH_RESET",
+ "RCM_MARKER2",
+ "CAM_DC_MIPI_MUX_EN",
+ "CAM_DC_MIPI_MUX_SEL",
+ "AFC_PHY_TA_D_PLUS", /* GPIO_30 */
+ "AFC_PHY_TA_D_MINUS",
+ "PM8008_1_IRQ",
+ "PM8008_1_RESET_N",
+ "PM8008_2_IRQ",
+ "PM8008_2_RESET_N",
+ "CAM_DC_I3C_SDA",
+ "CAM_DC_I3C_SCL",
+ "FP_INT_N",
+ "FP_WUHB_INT_N",
+ "SMB_SPMI_DATA", /* GPIO_40 */
+ "SMB_SPMI_CLK",
+ "USB_HUB_RESET",
+ "FORCE_USB_BOOT",
+ "LRF_IRQ",
+ "NC",
+ "IMU2_INT",
+ "HDMI_3P3_EN",
+ "HDMI_RSTN",
+ "HDMI_1P2_EN",
+ "HDMI_INT", /* GPIO_50 */
+ "USB1_ID",
+ "FP_SPI_MISO",
+ "FP_SPI_MOSI",
+ "FP_SPI_CLK",
+ "FP_SPI_CS_N",
+ "NFC_ESE_SPI_MISO",
+ "NFC_ESE_SPI_MOSI",
+ "NFC_ESE_SPI_CLK",
+ "NFC_ESE_SPI_CS",
+ "NFC_I2C_SDA", /* GPIO_60 */
+ "NFC_I2C_SCLC",
+ "NFC_EN",
+ "NFC_CLK_REQ",
+ "HST_WLAN_EN",
+ "HST_BT_EN",
+ "HST_SW_CTRL",
+ "NC",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX", /* GPIO_70 */
+ "HST_BT_UART_RX",
+ "CAM_DC_SPI0_MISO",
+ "CAM_DC_SPI0_MOSI",
+ "CAM_DC_SPI0_CLK",
+ "CAM_DC_SPI0_CS_N",
+ "CAM_DC_SPI1_MISO",
+ "CAM_DC_SPI1_MOSI",
+ "CAM_DC_SPI1_CLK",
+ "CAM_DC_SPI1_CS_N",
+ "HALL_INT_N", /* GPIO_80 */
+ "USB_PHY_PS",
+ "MDP_VSYNC_P",
+ "MDP_VSYNC_S",
+ "ETH_3P3_EN",
+ "RADAR_INT",
+ "NFC_DWL_REQ",
+ "SM_GPIO_87",
+ "WCD_RESET_N",
+ "ALSP_INT_N",
+ "PRESS_INT", /* GPIO_90 */
+ "SAR_INT_N",
+ "SD_CARD_DET_N",
+ "NC",
+ "PCIE0_RESET_N",
+ "PCIE0_CLK_REQ_N",
+ "PCIE0_WAKE_N",
+ "PCIE1_RESET_N",
+ "PCIE1_CLK_REQ_N",
+ "PCIE1_WAKE_N",
+ "CAM_MCLK0", /* GPIO_100 */
+ "CAM_MCLK1",
+ "CAM_MCLK2",
+ "CAM_MCLK3",
+ "CAM_MCLK4",
+ "CAM_MCLK5",
+ "CAM2_RESET_N",
+ "CCI_I2C0_SDA",
+ "CCI_I2C0_SCL",
+ "CCI_I2C1_SDA",
+ "CCI_I2C1_SCL", /* GPIO_110 */
+ "CCI_I2C2_SDA",
+ "CCI_I2C2_SCL",
+ "CCI_I2C3_SDA",
+ "CCI_I2C3_SCL",
+ "CAM5_RESET_N",
+ "CAM4_RESET_N",
+ "CAM3_RESET_N",
+ "IMU1_INT",
+ "MAG_INT_N",
+ "MI2S2_I2S_SCK", /* GPIO_120 */
+ "MI2S2_I2S_DAT0",
+ "MI2S2_I2S_WS",
+ "HIFI_DAC_I2S_MCLK",
+ "MI2S2_I2S_DAT1",
+ "HIFI_DAC_I2S_SCK",
+ "HIFI_DAC_I2S_DAT0",
+ "NC",
+ "HIFI_DAC_I2S_WS",
+ "HST_BT_WLAN_SLIMBUS_CLK",
+ "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+ "BT_LED_EN",
+ "WLAN_LED_EN",
+ "NC",
+ "NC",
+ "NC",
+ "UIM2_PRESENT",
+ "NC",
+ "NC",
+ "NC",
+ "UIM1_PRESENT", /* GPIO_140 */
+ "NC",
+ "SM_RFFE0_DATA",
+ "NC",
+ "SM_RFFE1_DATA",
+ "SM_MSS_GRFC4",
+ "SM_MSS_GRFC5",
+ "SM_MSS_GRFC6",
+ "SM_MSS_GRFC7",
+ "SM_RFFE4_CLK",
+ "SM_RFFE4_DATA", /* GPIO_150 */
+ "WLAN_COEX_UART1_RX",
+ "WLAN_COEX_UART1_TX",
+ "HST_SW_CTRL",
+ "DSI0_STATUS",
+ "DSI1_STATUS",
+ "APPS_PBL_BOOT_SPEED_1",
+ "APPS_BOOT_FROM_ROM",
+ "APPS_PBL_BOOT_SPEED_0",
+ "QLINK0_REQ",
+ "QLINK0_EN", /* GPIO_160 */
+ "QLINK0_WMSS_RESET_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1", /* GPIO_170 */
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0",
+ "WCD_SWR_RX_DATA1",
+ "DMIC01_CLK",
+ "DMIC01_DATA",
+ "DMIC23_CLK",
+ "DMIC23_DATA",
+ "WSA_SWR_CLK",
+ "WSA_SWR_DATA",
+ "DMIC45_CLK", /* GPIO_180 */
+ "DMIC45_DATA",
+ "WCD_SWR_TX_DATA2",
+ "SENSOR_I3C_SDA",
+ "SENSOR_I3C_SCL",
+ "CAM_OIS0_I3C_SDA",
+ "CAM_OIS0_I3C_SCL",
+ "IMU_SPI_MISO",
+ "IMU_SPI_MOSI",
+ "IMU_SPI_CLK",
+ "IMU_SPI_CS_N", /* GPIO_190 */
+ "MAG_I2C_SDA",
+ "MAG_I2C_SCL",
+ "SENSOR_I2C_SDA",
+ "SENSOR_I2C_SCL",
+ "RADAR_SPI_MISO",
+ "RADAR_SPI_MOSI",
+ "RADAR_SPI_CLK",
+ "RADAR_SPI_CS_N",
+ "HST_BLE_UART_TX",
+ "HST_BLE_UART_RX", /* GPIO_200 */
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
};
&uart2 {
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH v2 08/12] arm64: dts: qcom: sm8350: Remove mmxc power-domain-name
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
` (6 preceding siblings ...)
2022-11-15 13:31 ` [PATCH v2 07/12] arm64: dts: qcom: sm8350: Add &tlmm gpio-line-names Robert Foss
@ 2022-11-15 13:31 ` Robert Foss
2022-11-15 13:44 ` Konrad Dybcio
2022-11-15 13:31 ` [PATCH v2 09/12] arm64: dts: qcom: sm8350: Use 2 interconnect cells Robert Foss
` (4 subsequent siblings)
12 siblings, 1 reply; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:31 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
The mmxc power-domain-name is not required, and is not
used by either earlier or later SoC versions (sm8250 / sm8450).
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index cbd48f248df4..805d53d91952 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2558,7 +2558,6 @@ dispcc: clock-controller@af00000 {
#power-domain-cells = <1>;
power-domains = <&rpmhpd SM8350_MMCX>;
- power-domain-names = "mmcx";
};
adsp: remoteproc@17300000 {
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [PATCH v2 08/12] arm64: dts: qcom: sm8350: Remove mmxc power-domain-name
2022-11-15 13:31 ` [PATCH v2 08/12] arm64: dts: qcom: sm8350: Remove mmxc power-domain-name Robert Foss
@ 2022-11-15 13:44 ` Konrad Dybcio
0 siblings, 0 replies; 34+ messages in thread
From: Konrad Dybcio @ 2022-11-15 13:44 UTC (permalink / raw)
To: Robert Foss, robdclark, quic_abhinavk, dmitry.baryshkov, sean,
airlied, daniel, robh+dt, krzysztof.kozlowski+dt, agross,
bjorn.andersson, quic_kalyant, swboyd, angelogioacchino.delregno,
loic.poulain, quic_khsieh, quic_vpolimer, vkoul, dianders,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Jonathan Marek, vinod.koul, quic_jesszhan, andersson
On 15/11/2022 14:31, Robert Foss wrote:
> The mmxc power-domain-name is not required, and is not
> used by either earlier or later SoC versions (sm8250 / sm8450).
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index cbd48f248df4..805d53d91952 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -2558,7 +2558,6 @@ dispcc: clock-controller@af00000 {
> #power-domain-cells = <1>;
>
> power-domains = <&rpmhpd SM8350_MMCX>;
> - power-domain-names = "mmcx";
> };
>
> adsp: remoteproc@17300000 {
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v2 09/12] arm64: dts: qcom: sm8350: Use 2 interconnect cells
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
` (7 preceding siblings ...)
2022-11-15 13:31 ` [PATCH v2 08/12] arm64: dts: qcom: sm8350: Remove mmxc power-domain-name Robert Foss
@ 2022-11-15 13:31 ` Robert Foss
2022-11-15 13:45 ` Konrad Dybcio
2022-11-15 13:31 ` [PATCH v2 10/12] arm64: dts: qcom: sm8350: Add display system nodes Robert Foss
` (3 subsequent siblings)
12 siblings, 1 reply; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:31 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
Use two interconnect cells in order to optionally
support a path tag.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 805d53d91952..434f8e8b12c1 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1543,56 +1543,56 @@ apps_smmu: iommu@15000000 {
config_noc: interconnect@1500000 {
compatible = "qcom,sm8350-config-noc";
reg = <0 0x01500000 0 0xa580>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mc_virt: interconnect@1580000 {
compatible = "qcom,sm8350-mc-virt";
reg = <0 0x01580000 0 0x1000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1680000 {
compatible = "qcom,sm8350-system-noc";
reg = <0 0x01680000 0 0x1c200>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sm8350-aggre1-noc";
reg = <0 0x016e0000 0 0x1f180>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre2_noc: interconnect@1700000 {
compatible = "qcom,sm8350-aggre2-noc";
reg = <0 0x01700000 0 0x33000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sm8350-mmss-noc";
reg = <0 0x01740000 0 0x1f080>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
lpass_ag_noc: interconnect@3c40000 {
compatible = "qcom,sm8350-lpass-ag-noc";
reg = <0 0x03c40000 0 0xf080>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
compute_noc: interconnect@a0c0000{
compatible = "qcom,sm8350-compute-noc";
reg = <0 0x0a0c0000 0 0xa180>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
@@ -1620,8 +1620,8 @@ ipa: ipa@1e40000 {
clocks = <&rpmhcc RPMH_IPA_CLK>;
clock-names = "core";
- interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
- <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
+ interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
interconnect-names = "memory",
"config";
@@ -1661,7 +1661,7 @@ mpss: remoteproc@4080000 {
<&rpmhpd SM8350_MSS>;
power-domain-names = "cx", "mss";
- interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
+ interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1 0>;
memory-region = <&pil_modem_mem>;
@@ -2239,7 +2239,7 @@ cdsp: remoteproc@98900000 {
<&rpmhpd SM8350_MXC>;
power-domain-names = "cx", "mxc";
- interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
+ interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
memory-region = <&pil_cdsp_mem>;
@@ -2421,14 +2421,14 @@ usb_2_ssphy: phy@88ebe00 {
dc_noc: interconnect@90c0000 {
compatible = "qcom,sm8350-dc-noc";
reg = <0 0x090c0000 0 0x4200>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
gem_noc: interconnect@9100000 {
compatible = "qcom,sm8350-gem-noc";
reg = <0 0x09100000 0 0xb4000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [PATCH v2 09/12] arm64: dts: qcom: sm8350: Use 2 interconnect cells
2022-11-15 13:31 ` [PATCH v2 09/12] arm64: dts: qcom: sm8350: Use 2 interconnect cells Robert Foss
@ 2022-11-15 13:45 ` Konrad Dybcio
0 siblings, 0 replies; 34+ messages in thread
From: Konrad Dybcio @ 2022-11-15 13:45 UTC (permalink / raw)
To: Robert Foss, robdclark, quic_abhinavk, dmitry.baryshkov, sean,
airlied, daniel, robh+dt, krzysztof.kozlowski+dt, agross,
bjorn.andersson, quic_kalyant, swboyd, angelogioacchino.delregno,
loic.poulain, quic_khsieh, quic_vpolimer, vkoul, dianders,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Jonathan Marek, vinod.koul, quic_jesszhan, andersson
On 15/11/2022 14:31, Robert Foss wrote:
> Use two interconnect cells in order to optionally
> support a path tag.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 ++++++++++++++--------------
> 1 file changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 805d53d91952..434f8e8b12c1 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -1543,56 +1543,56 @@ apps_smmu: iommu@15000000 {
> config_noc: interconnect@1500000 {
> compatible = "qcom,sm8350-config-noc";
> reg = <0 0x01500000 0 0xa580>;
> - #interconnect-cells = <1>;
> + #interconnect-cells = <2>;
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
> mc_virt: interconnect@1580000 {
> compatible = "qcom,sm8350-mc-virt";
> reg = <0 0x01580000 0 0x1000>;
> - #interconnect-cells = <1>;
> + #interconnect-cells = <2>;
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
> system_noc: interconnect@1680000 {
> compatible = "qcom,sm8350-system-noc";
> reg = <0 0x01680000 0 0x1c200>;
> - #interconnect-cells = <1>;
> + #interconnect-cells = <2>;
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
> aggre1_noc: interconnect@16e0000 {
> compatible = "qcom,sm8350-aggre1-noc";
> reg = <0 0x016e0000 0 0x1f180>;
> - #interconnect-cells = <1>;
> + #interconnect-cells = <2>;
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
> aggre2_noc: interconnect@1700000 {
> compatible = "qcom,sm8350-aggre2-noc";
> reg = <0 0x01700000 0 0x33000>;
> - #interconnect-cells = <1>;
> + #interconnect-cells = <2>;
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
> mmss_noc: interconnect@1740000 {
> compatible = "qcom,sm8350-mmss-noc";
> reg = <0 0x01740000 0 0x1f080>;
> - #interconnect-cells = <1>;
> + #interconnect-cells = <2>;
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
> lpass_ag_noc: interconnect@3c40000 {
> compatible = "qcom,sm8350-lpass-ag-noc";
> reg = <0 0x03c40000 0 0xf080>;
> - #interconnect-cells = <1>;
> + #interconnect-cells = <2>;
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
> compute_noc: interconnect@a0c0000{
> compatible = "qcom,sm8350-compute-noc";
> reg = <0 0x0a0c0000 0 0xa180>;
> - #interconnect-cells = <1>;
> + #interconnect-cells = <2>;
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
> @@ -1620,8 +1620,8 @@ ipa: ipa@1e40000 {
> clocks = <&rpmhcc RPMH_IPA_CLK>;
> clock-names = "core";
>
> - interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
> - <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
> + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
> interconnect-names = "memory",
> "config";
>
> @@ -1661,7 +1661,7 @@ mpss: remoteproc@4080000 {
> <&rpmhpd SM8350_MSS>;
> power-domain-names = "cx", "mss";
>
> - interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
> + interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1 0>;
>
> memory-region = <&pil_modem_mem>;
>
> @@ -2239,7 +2239,7 @@ cdsp: remoteproc@98900000 {
> <&rpmhpd SM8350_MXC>;
> power-domain-names = "cx", "mxc";
>
> - interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
> + interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
>
> memory-region = <&pil_cdsp_mem>;
>
> @@ -2421,14 +2421,14 @@ usb_2_ssphy: phy@88ebe00 {
> dc_noc: interconnect@90c0000 {
> compatible = "qcom,sm8350-dc-noc";
> reg = <0 0x090c0000 0 0x4200>;
> - #interconnect-cells = <1>;
> + #interconnect-cells = <2>;
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
> gem_noc: interconnect@9100000 {
> compatible = "qcom,sm8350-gem-noc";
> reg = <0 0x09100000 0 0xb4000>;
> - #interconnect-cells = <1>;
> + #interconnect-cells = <2>;
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v2 10/12] arm64: dts: qcom: sm8350: Add display system nodes
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
` (8 preceding siblings ...)
2022-11-15 13:31 ` [PATCH v2 09/12] arm64: dts: qcom: sm8350: Use 2 interconnect cells Robert Foss
@ 2022-11-15 13:31 ` Robert Foss
2022-11-15 13:47 ` Konrad Dybcio
2022-11-15 13:31 ` [PATCH v2 11/12] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes Robert Foss
` (2 subsequent siblings)
12 siblings, 1 reply; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:31 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
Add mdss, mdss_mdp, dsi0, dsi0_phy nodes. With these
nodes the display subsystem is configured to support
one DSI output.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 197 ++++++++++++++++++++++++++-
1 file changed, 193 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 434f8e8b12c1..5c98e5cf5ad0 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -3,6 +3,7 @@
* Copyright (c) 2020, Linaro Limited
*/
+#include <dt-bindings/interconnect/qcom,sm8350.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
@@ -2536,14 +2537,201 @@ usb_2_dwc3: usb@a800000 {
};
};
+ mdss: mdss@ae00000 {
+ compatible = "qcom,sm8350-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x820 0x402>;
+
+ status = "disabled";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mdss_mdp: display-controller@ae01000 {
+ compatible = "qcom,sm8350-dpu";
+ reg = <0 0x0ae01000 0 0x8f000>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi0: dsi@ae94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae94000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>,
+ <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-5nm-8350";
+ reg = <0 0x0ae94400 0 0x200>,
+ <0 0x0ae94600 0 0x280>,
+ <0 0x0ae94900 0 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+
+ dsi_opp_table: dsi-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+ };
+
dispcc: clock-controller@af00000 {
compatible = "qcom,sm8350-dispcc";
reg = <0 0x0af00000 0 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
- <0>,
- <0>,
- <0>,
- <0>,
+ <&dsi0_phy 0>, <&dsi0_phy 1>,
+ <0>, <0>,
<0>,
<0>;
clock-names = "bi_tcxo",
@@ -2558,6 +2746,7 @@ dispcc: clock-controller@af00000 {
#power-domain-cells = <1>;
power-domains = <&rpmhpd SM8350_MMCX>;
+ required-opps = <&rpmhpd_opp_turbo>;
};
adsp: remoteproc@17300000 {
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [PATCH v2 10/12] arm64: dts: qcom: sm8350: Add display system nodes
2022-11-15 13:31 ` [PATCH v2 10/12] arm64: dts: qcom: sm8350: Add display system nodes Robert Foss
@ 2022-11-15 13:47 ` Konrad Dybcio
2022-11-29 16:47 ` Robert Foss
0 siblings, 1 reply; 34+ messages in thread
From: Konrad Dybcio @ 2022-11-15 13:47 UTC (permalink / raw)
To: Robert Foss, robdclark, quic_abhinavk, dmitry.baryshkov, sean,
airlied, daniel, robh+dt, krzysztof.kozlowski+dt, agross,
bjorn.andersson, quic_kalyant, swboyd, angelogioacchino.delregno,
loic.poulain, quic_khsieh, quic_vpolimer, vkoul, dianders,
linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Jonathan Marek, vinod.koul, quic_jesszhan, andersson
On 15/11/2022 14:31, Robert Foss wrote:
> Add mdss, mdss_mdp, dsi0, dsi0_phy nodes. With these
> nodes the display subsystem is configured to support
> one DSI output.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 197 ++++++++++++++++++++++++++-
> 1 file changed, 193 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 434f8e8b12c1..5c98e5cf5ad0 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -3,6 +3,7 @@
> * Copyright (c) 2020, Linaro Limited
> */
>
> +#include <dt-bindings/interconnect/qcom,sm8350.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
> #include <dt-bindings/clock/qcom,gcc-sm8350.h>
> @@ -2536,14 +2537,201 @@ usb_2_dwc3: usb@a800000 {
> };
> };
>
> + mdss: mdss@ae00000 {
> + compatible = "qcom,sm8350-mdss";
> + reg = <0 0x0ae00000 0 0x1000>;
> + reg-names = "mdss";
> +
> + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> + power-domains = <&dispcc MDSS_GDSC>;
> + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&gcc GCC_DISP_SF_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface", "bus", "nrt_bus", "core";
> +
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + iommus = <&apps_smmu 0x820 0x402>;
> +
> + status = "disabled";
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + mdss_mdp: display-controller@ae01000 {
> + compatible = "qcom,sm8350-dpu";
> + reg = <0 0x0ae01000 0 0x8f000>,
> + <0 0x0aeb0000 0 0x2008>;
> + reg-names = "mdp", "vbif";
> +
> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&gcc GCC_DISP_SF_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> + clock-names = "bus",
> + "nrt_bus",
> + "iface",
> + "lut",
> + "core",
> + "vsync";
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> + assigned-clock-rates = <19200000>;
> +
> + operating-points-v2 = <&mdp_opp_table>;
> + power-domains = <&rpmhpd SM8350_MMCX>;
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <0>;
> +
> + status = "disabled";
It doesn't make sense to disable mdp separately, as mdss is essentially
useless without it.
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dpu_intf1_out: endpoint {
> + remote-endpoint = <&dsi0_in>;
> + };
> + };
> + };
> +
> + mdp_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-200000000 {
> + opp-hz = /bits/ 64 <200000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-345000000 {
> + opp-hz = /bits/ 64 <345000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> +
> + opp-460000000 {
> + opp-hz = /bits/ 64 <460000000>;
> + required-opps = <&rpmhpd_opp_nom>;
> + };
> + };
> + };
> +
> + dsi0: dsi@ae94000 {
> + compatible = "qcom,mdss-dsi-ctrl";
> + reg = <0 0x0ae94000 0 0x400>;
> + reg-names = "dsi_ctrl";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <4>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> + <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>;
> + clock-names = "byte",
> + "byte_intf",
> + "pixel",
> + "core",
> + "iface",
> + "bus";
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
> + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> + assigned-clock-parents = <&dsi0_phy 0>,
> + <&dsi0_phy 1>;
> +
> + operating-points-v2 = <&dsi_opp_table>;
> + power-domains = <&rpmhpd SM8350_MMCX>;
> +
> + phys = <&dsi0_phy>;
> + phy-names = "dsi";
I think that was dropped as of late.
> +
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dsi0_in: endpoint {
> + remote-endpoint = <&dpu_intf1_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dsi0_out: endpoint {
> + };
> + };
> + };
> + };
> +
> + dsi0_phy: phy@ae94400 {
> + compatible = "qcom,dsi-phy-5nm-8350";
> + reg = <0 0x0ae94400 0 0x200>,
> + <0 0x0ae94600 0 0x280>,
> + <0 0x0ae94900 0 0x260>;
> + reg-names = "dsi_phy",
> + "dsi_phy_lane",
> + "dsi_pll";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "ref";
> +
> + status = "disabled";
> +
> + dsi_opp_table: dsi-opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-187500000 {
> + opp-hz = /bits/ 64 <187500000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-358000000 {
> + opp-hz = /bits/ 64 <358000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> + };
> + };
> +
> dispcc: clock-controller@af00000 {
> compatible = "qcom,sm8350-dispcc";
> reg = <0 0x0af00000 0 0x10000>;
> clocks = <&rpmhcc RPMH_CXO_CLK>,
> - <0>,
> - <0>,
> - <0>,
> - <0>,
> + <&dsi0_phy 0>, <&dsi0_phy 1>,
> + <0>, <0>,
> <0>,
> <0>;
> clock-names = "bi_tcxo",
> @@ -2558,6 +2746,7 @@ dispcc: clock-controller@af00000 {
> #power-domain-cells = <1>;
>
> power-domains = <&rpmhpd SM8350_MMCX>;
> + required-opps = <&rpmhpd_opp_turbo>;
A turbo vote is required for it to function? Seems a bit high..
Konrad
> };
>
> adsp: remoteproc@17300000 {
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [PATCH v2 10/12] arm64: dts: qcom: sm8350: Add display system nodes
2022-11-15 13:47 ` Konrad Dybcio
@ 2022-11-29 16:47 ` Robert Foss
0 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-29 16:47 UTC (permalink / raw)
To: Konrad Dybcio
Cc: airlied, dri-devel, bjorn.andersson, krzysztof.kozlowski+dt,
angelogioacchino.delregno, quic_vpolimer, vinod.koul,
Jonathan Marek, quic_khsieh, agross, quic_jesszhan, devicetree,
linux-arm-msm, quic_abhinavk, swboyd, robh+dt, sean,
quic_kalyant, loic.poulain, andersson, dianders, linux-kernel,
vkoul, dmitry.baryshkov, freedreno
On Tue, 15 Nov 2022 at 14:47, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
>
>
> On 15/11/2022 14:31, Robert Foss wrote:
> > Add mdss, mdss_mdp, dsi0, dsi0_phy nodes. With these
> > nodes the display subsystem is configured to support
> > one DSI output.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> > arch/arm64/boot/dts/qcom/sm8350.dtsi | 197 ++++++++++++++++++++++++++-
> > 1 file changed, 193 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> > index 434f8e8b12c1..5c98e5cf5ad0 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> > @@ -3,6 +3,7 @@
> > * Copyright (c) 2020, Linaro Limited
> > */
> >
> > +#include <dt-bindings/interconnect/qcom,sm8350.h>
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
> > #include <dt-bindings/clock/qcom,gcc-sm8350.h>
> > @@ -2536,14 +2537,201 @@ usb_2_dwc3: usb@a800000 {
> > };
> > };
> >
> > + mdss: mdss@ae00000 {
> > + compatible = "qcom,sm8350-mdss";
> > + reg = <0 0x0ae00000 0 0x1000>;
> > + reg-names = "mdss";
> > +
> > + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> > + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> > + interconnect-names = "mdp0-mem", "mdp1-mem";
> > +
> > + power-domains = <&dispcc MDSS_GDSC>;
> > + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
> > +
> > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > + <&gcc GCC_DISP_HF_AXI_CLK>,
> > + <&gcc GCC_DISP_SF_AXI_CLK>,
> > + <&dispcc DISP_CC_MDSS_MDP_CLK>;
> > + clock-names = "iface", "bus", "nrt_bus", "core";
> > +
> > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > +
> > + iommus = <&apps_smmu 0x820 0x402>;
> > +
> > + status = "disabled";
> > +
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + mdss_mdp: display-controller@ae01000 {
> > + compatible = "qcom,sm8350-dpu";
> > + reg = <0 0x0ae01000 0 0x8f000>,
> > + <0 0x0aeb0000 0 0x2008>;
> > + reg-names = "mdp", "vbif";
> > +
> > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> > + <&gcc GCC_DISP_SF_AXI_CLK>,
> > + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> > + <&dispcc DISP_CC_MDSS_MDP_CLK>,
> > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> > + clock-names = "bus",
> > + "nrt_bus",
> > + "iface",
> > + "lut",
> > + "core",
> > + "vsync";
> > +
> > + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> > + assigned-clock-rates = <19200000>;
> > +
> > + operating-points-v2 = <&mdp_opp_table>;
> > + power-domains = <&rpmhpd SM8350_MMCX>;
> > +
> > + interrupt-parent = <&mdss>;
> > + interrupts = <0>;
> > +
> > + status = "disabled";
> It doesn't make sense to disable mdp separately, as mdss is essentially
> useless without it.
Ack
>
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + dpu_intf1_out: endpoint {
> > + remote-endpoint = <&dsi0_in>;
> > + };
> > + };
> > + };
> > +
> > + mdp_opp_table: opp-table {
> > + compatible = "operating-points-v2";
> > +
> > + opp-200000000 {
> > + opp-hz = /bits/ 64 <200000000>;
> > + required-opps = <&rpmhpd_opp_low_svs>;
> > + };
> > +
> > + opp-300000000 {
> > + opp-hz = /bits/ 64 <300000000>;
> > + required-opps = <&rpmhpd_opp_svs>;
> > + };
> > +
> > + opp-345000000 {
> > + opp-hz = /bits/ 64 <345000000>;
> > + required-opps = <&rpmhpd_opp_svs_l1>;
> > + };
> > +
> > + opp-460000000 {
> > + opp-hz = /bits/ 64 <460000000>;
> > + required-opps = <&rpmhpd_opp_nom>;
> > + };
> > + };
> > + };
> > +
> > + dsi0: dsi@ae94000 {
> > + compatible = "qcom,mdss-dsi-ctrl";
> > + reg = <0 0x0ae94000 0 0x400>;
> > + reg-names = "dsi_ctrl";
> > +
> > + interrupt-parent = <&mdss>;
> > + interrupts = <4>;
> > +
> > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> > + <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> > + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > + <&gcc GCC_DISP_HF_AXI_CLK>;
> > + clock-names = "byte",
> > + "byte_intf",
> > + "pixel",
> > + "core",
> > + "iface",
> > + "bus";
> > +
> > + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
> > + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> > + assigned-clock-parents = <&dsi0_phy 0>,
> > + <&dsi0_phy 1>;
> > +
> > + operating-points-v2 = <&dsi_opp_table>;
> > + power-domains = <&rpmhpd SM8350_MMCX>;
> > +
> > + phys = <&dsi0_phy>;
> > + phy-names = "dsi";
> I think that was dropped as of late.
Ack
>
> > +
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + dsi0_in: endpoint {
> > + remote-endpoint = <&dpu_intf1_out>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > + dsi0_out: endpoint {
> > + };
> > + };
> > + };
> > + };
> > +
> > + dsi0_phy: phy@ae94400 {
> > + compatible = "qcom,dsi-phy-5nm-8350";
> > + reg = <0 0x0ae94400 0 0x200>,
> > + <0 0x0ae94600 0 0x280>,
> > + <0 0x0ae94900 0 0x260>;
> > + reg-names = "dsi_phy",
> > + "dsi_phy_lane",
> > + "dsi_pll";
> > +
> > + #clock-cells = <1>;
> > + #phy-cells = <0>;
> > +
> > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > + <&rpmhcc RPMH_CXO_CLK>;
> > + clock-names = "iface", "ref";
> > +
> > + status = "disabled";
> > +
> > + dsi_opp_table: dsi-opp-table {
> > + compatible = "operating-points-v2";
> > +
> > + opp-187500000 {
> > + opp-hz = /bits/ 64 <187500000>;
> > + required-opps = <&rpmhpd_opp_low_svs>;
> > + };
> > +
> > + opp-300000000 {
> > + opp-hz = /bits/ 64 <300000000>;
> > + required-opps = <&rpmhpd_opp_svs>;
> > + };
> > +
> > + opp-358000000 {
> > + opp-hz = /bits/ 64 <358000000>;
> > + required-opps = <&rpmhpd_opp_svs_l1>;
> > + };
> > + };
> > + };
> > + };
> > +
> > dispcc: clock-controller@af00000 {
> > compatible = "qcom,sm8350-dispcc";
> > reg = <0 0x0af00000 0 0x10000>;
> > clocks = <&rpmhcc RPMH_CXO_CLK>,
> > - <0>,
> > - <0>,
> > - <0>,
> > - <0>,
> > + <&dsi0_phy 0>, <&dsi0_phy 1>,
> > + <0>, <0>,
> > <0>,
> > <0>;
> > clock-names = "bi_tcxo",
> > @@ -2558,6 +2746,7 @@ dispcc: clock-controller@af00000 {
> > #power-domain-cells = <1>;
> >
> > power-domains = <&rpmhpd SM8350_MMCX>;
> > + required-opps = <&rpmhpd_opp_turbo>;
> A turbo vote is required for it to function? Seems a bit high..
Dmitry hit a snag using &rpmhpd_opp_low_svs, so this was a dummy
value. I can't replicate that issue, but am having a conversation with
him off-list about this.
On my sm8350-hdk board &rpmhpd_opp_low_svs is working fine.
>
> Konrad
> > };
> >
> > adsp: remoteproc@17300000 {
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [PATCH v2 10/12] arm64: dts: qcom: sm8350: Add display system nodes
@ 2022-11-29 16:47 ` Robert Foss
0 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-29 16:47 UTC (permalink / raw)
To: Konrad Dybcio
Cc: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
quic_kalyant, swboyd, angelogioacchino.delregno, loic.poulain,
quic_khsieh, quic_vpolimer, vkoul, dianders, linux-arm-msm,
dri-devel, freedreno, devicetree, linux-kernel, Jonathan Marek,
vinod.koul, quic_jesszhan, andersson
On Tue, 15 Nov 2022 at 14:47, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
>
>
> On 15/11/2022 14:31, Robert Foss wrote:
> > Add mdss, mdss_mdp, dsi0, dsi0_phy nodes. With these
> > nodes the display subsystem is configured to support
> > one DSI output.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> > arch/arm64/boot/dts/qcom/sm8350.dtsi | 197 ++++++++++++++++++++++++++-
> > 1 file changed, 193 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> > index 434f8e8b12c1..5c98e5cf5ad0 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> > @@ -3,6 +3,7 @@
> > * Copyright (c) 2020, Linaro Limited
> > */
> >
> > +#include <dt-bindings/interconnect/qcom,sm8350.h>
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
> > #include <dt-bindings/clock/qcom,gcc-sm8350.h>
> > @@ -2536,14 +2537,201 @@ usb_2_dwc3: usb@a800000 {
> > };
> > };
> >
> > + mdss: mdss@ae00000 {
> > + compatible = "qcom,sm8350-mdss";
> > + reg = <0 0x0ae00000 0 0x1000>;
> > + reg-names = "mdss";
> > +
> > + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> > + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> > + interconnect-names = "mdp0-mem", "mdp1-mem";
> > +
> > + power-domains = <&dispcc MDSS_GDSC>;
> > + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
> > +
> > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > + <&gcc GCC_DISP_HF_AXI_CLK>,
> > + <&gcc GCC_DISP_SF_AXI_CLK>,
> > + <&dispcc DISP_CC_MDSS_MDP_CLK>;
> > + clock-names = "iface", "bus", "nrt_bus", "core";
> > +
> > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > +
> > + iommus = <&apps_smmu 0x820 0x402>;
> > +
> > + status = "disabled";
> > +
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + mdss_mdp: display-controller@ae01000 {
> > + compatible = "qcom,sm8350-dpu";
> > + reg = <0 0x0ae01000 0 0x8f000>,
> > + <0 0x0aeb0000 0 0x2008>;
> > + reg-names = "mdp", "vbif";
> > +
> > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> > + <&gcc GCC_DISP_SF_AXI_CLK>,
> > + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> > + <&dispcc DISP_CC_MDSS_MDP_CLK>,
> > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> > + clock-names = "bus",
> > + "nrt_bus",
> > + "iface",
> > + "lut",
> > + "core",
> > + "vsync";
> > +
> > + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> > + assigned-clock-rates = <19200000>;
> > +
> > + operating-points-v2 = <&mdp_opp_table>;
> > + power-domains = <&rpmhpd SM8350_MMCX>;
> > +
> > + interrupt-parent = <&mdss>;
> > + interrupts = <0>;
> > +
> > + status = "disabled";
> It doesn't make sense to disable mdp separately, as mdss is essentially
> useless without it.
Ack
>
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + dpu_intf1_out: endpoint {
> > + remote-endpoint = <&dsi0_in>;
> > + };
> > + };
> > + };
> > +
> > + mdp_opp_table: opp-table {
> > + compatible = "operating-points-v2";
> > +
> > + opp-200000000 {
> > + opp-hz = /bits/ 64 <200000000>;
> > + required-opps = <&rpmhpd_opp_low_svs>;
> > + };
> > +
> > + opp-300000000 {
> > + opp-hz = /bits/ 64 <300000000>;
> > + required-opps = <&rpmhpd_opp_svs>;
> > + };
> > +
> > + opp-345000000 {
> > + opp-hz = /bits/ 64 <345000000>;
> > + required-opps = <&rpmhpd_opp_svs_l1>;
> > + };
> > +
> > + opp-460000000 {
> > + opp-hz = /bits/ 64 <460000000>;
> > + required-opps = <&rpmhpd_opp_nom>;
> > + };
> > + };
> > + };
> > +
> > + dsi0: dsi@ae94000 {
> > + compatible = "qcom,mdss-dsi-ctrl";
> > + reg = <0 0x0ae94000 0 0x400>;
> > + reg-names = "dsi_ctrl";
> > +
> > + interrupt-parent = <&mdss>;
> > + interrupts = <4>;
> > +
> > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> > + <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> > + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > + <&gcc GCC_DISP_HF_AXI_CLK>;
> > + clock-names = "byte",
> > + "byte_intf",
> > + "pixel",
> > + "core",
> > + "iface",
> > + "bus";
> > +
> > + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
> > + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> > + assigned-clock-parents = <&dsi0_phy 0>,
> > + <&dsi0_phy 1>;
> > +
> > + operating-points-v2 = <&dsi_opp_table>;
> > + power-domains = <&rpmhpd SM8350_MMCX>;
> > +
> > + phys = <&dsi0_phy>;
> > + phy-names = "dsi";
> I think that was dropped as of late.
Ack
>
> > +
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + dsi0_in: endpoint {
> > + remote-endpoint = <&dpu_intf1_out>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > + dsi0_out: endpoint {
> > + };
> > + };
> > + };
> > + };
> > +
> > + dsi0_phy: phy@ae94400 {
> > + compatible = "qcom,dsi-phy-5nm-8350";
> > + reg = <0 0x0ae94400 0 0x200>,
> > + <0 0x0ae94600 0 0x280>,
> > + <0 0x0ae94900 0 0x260>;
> > + reg-names = "dsi_phy",
> > + "dsi_phy_lane",
> > + "dsi_pll";
> > +
> > + #clock-cells = <1>;
> > + #phy-cells = <0>;
> > +
> > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> > + <&rpmhcc RPMH_CXO_CLK>;
> > + clock-names = "iface", "ref";
> > +
> > + status = "disabled";
> > +
> > + dsi_opp_table: dsi-opp-table {
> > + compatible = "operating-points-v2";
> > +
> > + opp-187500000 {
> > + opp-hz = /bits/ 64 <187500000>;
> > + required-opps = <&rpmhpd_opp_low_svs>;
> > + };
> > +
> > + opp-300000000 {
> > + opp-hz = /bits/ 64 <300000000>;
> > + required-opps = <&rpmhpd_opp_svs>;
> > + };
> > +
> > + opp-358000000 {
> > + opp-hz = /bits/ 64 <358000000>;
> > + required-opps = <&rpmhpd_opp_svs_l1>;
> > + };
> > + };
> > + };
> > + };
> > +
> > dispcc: clock-controller@af00000 {
> > compatible = "qcom,sm8350-dispcc";
> > reg = <0 0x0af00000 0 0x10000>;
> > clocks = <&rpmhcc RPMH_CXO_CLK>,
> > - <0>,
> > - <0>,
> > - <0>,
> > - <0>,
> > + <&dsi0_phy 0>, <&dsi0_phy 1>,
> > + <0>, <0>,
> > <0>,
> > <0>;
> > clock-names = "bi_tcxo",
> > @@ -2558,6 +2746,7 @@ dispcc: clock-controller@af00000 {
> > #power-domain-cells = <1>;
> >
> > power-domains = <&rpmhpd SM8350_MMCX>;
> > + required-opps = <&rpmhpd_opp_turbo>;
> A turbo vote is required for it to function? Seems a bit high..
Dmitry hit a snag using &rpmhpd_opp_low_svs, so this was a dummy
value. I can't replicate that issue, but am having a conversation with
him off-list about this.
On my sm8350-hdk board &rpmhpd_opp_low_svs is working fine.
>
> Konrad
> > };
> >
> > adsp: remoteproc@17300000 {
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [PATCH v2 10/12] arm64: dts: qcom: sm8350: Add display system nodes
2022-11-29 16:47 ` Robert Foss
@ 2022-11-29 19:59 ` Dmitry Baryshkov
-1 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2022-11-29 19:59 UTC (permalink / raw)
To: Robert Foss, Konrad Dybcio
Cc: robdclark, quic_abhinavk, sean, airlied, daniel, robh+dt,
krzysztof.kozlowski+dt, agross, bjorn.andersson, quic_kalyant,
swboyd, angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
On 29/11/2022 18:47, Robert Foss wrote:
> On Tue, 15 Nov 2022 at 14:47, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>>
>>
>>
>> On 15/11/2022 14:31, Robert Foss wrote:
>>> Add mdss, mdss_mdp, dsi0, dsi0_phy nodes. With these
>>> nodes the display subsystem is configured to support
>>> one DSI output.
>>>
>>> Signed-off-by: Robert Foss <robert.foss@linaro.org>
>>> ---
>>> arch/arm64/boot/dts/qcom/sm8350.dtsi | 197 ++++++++++++++++++++++++++-
>>> 1 file changed, 193 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
>>> index 434f8e8b12c1..5c98e5cf5ad0 100644
>>> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
>>> @@ -3,6 +3,7 @@
>>> * Copyright (c) 2020, Linaro Limited
>>> */
>>>
>>> +#include <dt-bindings/interconnect/qcom,sm8350.h>
>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
>>> #include <dt-bindings/clock/qcom,gcc-sm8350.h>
>>> @@ -2536,14 +2537,201 @@ usb_2_dwc3: usb@a800000 {
>>> };
>>> };
>>>
>>> + mdss: mdss@ae00000 {
>>> + compatible = "qcom,sm8350-mdss";
>>> + reg = <0 0x0ae00000 0 0x1000>;
>>> + reg-names = "mdss";
>>> +
>>> + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
>>> + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
>>> + interconnect-names = "mdp0-mem", "mdp1-mem";
>>> +
>>> + power-domains = <&dispcc MDSS_GDSC>;
>>> + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
>>> +
>>> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
>>> + <&gcc GCC_DISP_HF_AXI_CLK>,
>>> + <&gcc GCC_DISP_SF_AXI_CLK>,
>>> + <&dispcc DISP_CC_MDSS_MDP_CLK>;
>>> + clock-names = "iface", "bus", "nrt_bus", "core";
>>> +
>>> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <1>;
>>> +
>>> + iommus = <&apps_smmu 0x820 0x402>;
>>> +
>>> + status = "disabled";
>>> +
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> +
>>> + mdss_mdp: display-controller@ae01000 {
>>> + compatible = "qcom,sm8350-dpu";
>>> + reg = <0 0x0ae01000 0 0x8f000>,
>>> + <0 0x0aeb0000 0 0x2008>;
>>> + reg-names = "mdp", "vbif";
>>> +
>>> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
>>> + <&gcc GCC_DISP_SF_AXI_CLK>,
>>> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
>>> + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
>>> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
>>> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
>>> + clock-names = "bus",
>>> + "nrt_bus",
>>> + "iface",
>>> + "lut",
>>> + "core",
>>> + "vsync";
>>> +
>>> + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
>>> + assigned-clock-rates = <19200000>;
>>> +
>>> + operating-points-v2 = <&mdp_opp_table>;
>>> + power-domains = <&rpmhpd SM8350_MMCX>;
>>> +
>>> + interrupt-parent = <&mdss>;
>>> + interrupts = <0>;
>>> +
>>> + status = "disabled";
>> It doesn't make sense to disable mdp separately, as mdss is essentially
>> useless without it.
>
> Ack
>
>>
>>> +
>>> + ports {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + port@0 {
>>> + reg = <0>;
>>> + dpu_intf1_out: endpoint {
>>> + remote-endpoint = <&dsi0_in>;
>>> + };
>>> + };
>>> + };
>>> +
>>> + mdp_opp_table: opp-table {
>>> + compatible = "operating-points-v2";
>>> +
>>> + opp-200000000 {
>>> + opp-hz = /bits/ 64 <200000000>;
>>> + required-opps = <&rpmhpd_opp_low_svs>;
>>> + };
>>> +
>>> + opp-300000000 {
>>> + opp-hz = /bits/ 64 <300000000>;
>>> + required-opps = <&rpmhpd_opp_svs>;
>>> + };
>>> +
>>> + opp-345000000 {
>>> + opp-hz = /bits/ 64 <345000000>;
>>> + required-opps = <&rpmhpd_opp_svs_l1>;
>>> + };
>>> +
>>> + opp-460000000 {
>>> + opp-hz = /bits/ 64 <460000000>;
>>> + required-opps = <&rpmhpd_opp_nom>;
>>> + };
>>> + };
>>> + };
>>> +
>>> + dsi0: dsi@ae94000 {
>>> + compatible = "qcom,mdss-dsi-ctrl";
>>> + reg = <0 0x0ae94000 0 0x400>;
>>> + reg-names = "dsi_ctrl";
>>> +
>>> + interrupt-parent = <&mdss>;
>>> + interrupts = <4>;
>>> +
>>> + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
>>> + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
>>> + <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
>>> + <&dispcc DISP_CC_MDSS_ESC0_CLK>,
>>> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
>>> + <&gcc GCC_DISP_HF_AXI_CLK>;
>>> + clock-names = "byte",
>>> + "byte_intf",
>>> + "pixel",
>>> + "core",
>>> + "iface",
>>> + "bus";
>>> +
>>> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
>>> + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
>>> + assigned-clock-parents = <&dsi0_phy 0>,
>>> + <&dsi0_phy 1>;
>>> +
>>> + operating-points-v2 = <&dsi_opp_table>;
>>> + power-domains = <&rpmhpd SM8350_MMCX>;
>>> +
>>> + phys = <&dsi0_phy>;
>>> + phy-names = "dsi";
>> I think that was dropped as of late.
>
> Ack
>
>>
>>> +
>>> + status = "disabled";
>>> +
>>> + ports {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + port@0 {
>>> + reg = <0>;
>>> + dsi0_in: endpoint {
>>> + remote-endpoint = <&dpu_intf1_out>;
>>> + };
>>> + };
>>> +
>>> + port@1 {
>>> + reg = <1>;
>>> + dsi0_out: endpoint {
>>> + };
>>> + };
>>> + };
>>> + };
>>> +
>>> + dsi0_phy: phy@ae94400 {
>>> + compatible = "qcom,dsi-phy-5nm-8350";
>>> + reg = <0 0x0ae94400 0 0x200>,
>>> + <0 0x0ae94600 0 0x280>,
>>> + <0 0x0ae94900 0 0x260>;
>>> + reg-names = "dsi_phy",
>>> + "dsi_phy_lane",
>>> + "dsi_pll";
>>> +
>>> + #clock-cells = <1>;
>>> + #phy-cells = <0>;
>>> +
>>> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
>>> + <&rpmhcc RPMH_CXO_CLK>;
>>> + clock-names = "iface", "ref";
>>> +
>>> + status = "disabled";
>>> +
>>> + dsi_opp_table: dsi-opp-table {
>>> + compatible = "operating-points-v2";
>>> +
>>> + opp-187500000 {
>>> + opp-hz = /bits/ 64 <187500000>;
>>> + required-opps = <&rpmhpd_opp_low_svs>;
>>> + };
>>> +
>>> + opp-300000000 {
>>> + opp-hz = /bits/ 64 <300000000>;
>>> + required-opps = <&rpmhpd_opp_svs>;
>>> + };
>>> +
>>> + opp-358000000 {
>>> + opp-hz = /bits/ 64 <358000000>;
>>> + required-opps = <&rpmhpd_opp_svs_l1>;
>>> + };
>>> + };
>>> + };
>>> + };
>>> +
>>> dispcc: clock-controller@af00000 {
>>> compatible = "qcom,sm8350-dispcc";
>>> reg = <0 0x0af00000 0 0x10000>;
>>> clocks = <&rpmhcc RPMH_CXO_CLK>,
>>> - <0>,
>>> - <0>,
>>> - <0>,
>>> - <0>,
>>> + <&dsi0_phy 0>, <&dsi0_phy 1>,
>>> + <0>, <0>,
>>> <0>,
>>> <0>;
>>> clock-names = "bi_tcxo",
>>> @@ -2558,6 +2746,7 @@ dispcc: clock-controller@af00000 {
>>> #power-domain-cells = <1>;
>>>
>>> power-domains = <&rpmhpd SM8350_MMCX>;
>>> + required-opps = <&rpmhpd_opp_turbo>;
>> A turbo vote is required for it to function? Seems a bit high..
>
> Dmitry hit a snag using &rpmhpd_opp_low_svs, so this was a dummy
> value. I can't replicate that issue, but am having a conversation with
> him off-list about this.
>
> On my sm8350-hdk board &rpmhpd_opp_low_svs is working fine.
Maybe this is related to the bootloader setting up the mode or maybe it
was caused by the fact that I have the drm_msm set up as built-in rather
than a module.
>
>>
>> Konrad
>>> };
>>>
>>> adsp: remoteproc@17300000 {
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 34+ messages in thread* Re: [PATCH v2 10/12] arm64: dts: qcom: sm8350: Add display system nodes
@ 2022-11-29 19:59 ` Dmitry Baryshkov
0 siblings, 0 replies; 34+ messages in thread
From: Dmitry Baryshkov @ 2022-11-29 19:59 UTC (permalink / raw)
To: Robert Foss, Konrad Dybcio
Cc: airlied, dri-devel, bjorn.andersson, krzysztof.kozlowski+dt,
angelogioacchino.delregno, quic_vpolimer, vinod.koul,
Jonathan Marek, quic_khsieh, agross, quic_jesszhan, devicetree,
linux-arm-msm, quic_abhinavk, swboyd, robh+dt, sean,
quic_kalyant, loic.poulain, andersson, dianders, linux-kernel,
vkoul, freedreno
On 29/11/2022 18:47, Robert Foss wrote:
> On Tue, 15 Nov 2022 at 14:47, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>>
>>
>>
>> On 15/11/2022 14:31, Robert Foss wrote:
>>> Add mdss, mdss_mdp, dsi0, dsi0_phy nodes. With these
>>> nodes the display subsystem is configured to support
>>> one DSI output.
>>>
>>> Signed-off-by: Robert Foss <robert.foss@linaro.org>
>>> ---
>>> arch/arm64/boot/dts/qcom/sm8350.dtsi | 197 ++++++++++++++++++++++++++-
>>> 1 file changed, 193 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
>>> index 434f8e8b12c1..5c98e5cf5ad0 100644
>>> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
>>> @@ -3,6 +3,7 @@
>>> * Copyright (c) 2020, Linaro Limited
>>> */
>>>
>>> +#include <dt-bindings/interconnect/qcom,sm8350.h>
>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
>>> #include <dt-bindings/clock/qcom,gcc-sm8350.h>
>>> @@ -2536,14 +2537,201 @@ usb_2_dwc3: usb@a800000 {
>>> };
>>> };
>>>
>>> + mdss: mdss@ae00000 {
>>> + compatible = "qcom,sm8350-mdss";
>>> + reg = <0 0x0ae00000 0 0x1000>;
>>> + reg-names = "mdss";
>>> +
>>> + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
>>> + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
>>> + interconnect-names = "mdp0-mem", "mdp1-mem";
>>> +
>>> + power-domains = <&dispcc MDSS_GDSC>;
>>> + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
>>> +
>>> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
>>> + <&gcc GCC_DISP_HF_AXI_CLK>,
>>> + <&gcc GCC_DISP_SF_AXI_CLK>,
>>> + <&dispcc DISP_CC_MDSS_MDP_CLK>;
>>> + clock-names = "iface", "bus", "nrt_bus", "core";
>>> +
>>> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <1>;
>>> +
>>> + iommus = <&apps_smmu 0x820 0x402>;
>>> +
>>> + status = "disabled";
>>> +
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> +
>>> + mdss_mdp: display-controller@ae01000 {
>>> + compatible = "qcom,sm8350-dpu";
>>> + reg = <0 0x0ae01000 0 0x8f000>,
>>> + <0 0x0aeb0000 0 0x2008>;
>>> + reg-names = "mdp", "vbif";
>>> +
>>> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
>>> + <&gcc GCC_DISP_SF_AXI_CLK>,
>>> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
>>> + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
>>> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
>>> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
>>> + clock-names = "bus",
>>> + "nrt_bus",
>>> + "iface",
>>> + "lut",
>>> + "core",
>>> + "vsync";
>>> +
>>> + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
>>> + assigned-clock-rates = <19200000>;
>>> +
>>> + operating-points-v2 = <&mdp_opp_table>;
>>> + power-domains = <&rpmhpd SM8350_MMCX>;
>>> +
>>> + interrupt-parent = <&mdss>;
>>> + interrupts = <0>;
>>> +
>>> + status = "disabled";
>> It doesn't make sense to disable mdp separately, as mdss is essentially
>> useless without it.
>
> Ack
>
>>
>>> +
>>> + ports {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + port@0 {
>>> + reg = <0>;
>>> + dpu_intf1_out: endpoint {
>>> + remote-endpoint = <&dsi0_in>;
>>> + };
>>> + };
>>> + };
>>> +
>>> + mdp_opp_table: opp-table {
>>> + compatible = "operating-points-v2";
>>> +
>>> + opp-200000000 {
>>> + opp-hz = /bits/ 64 <200000000>;
>>> + required-opps = <&rpmhpd_opp_low_svs>;
>>> + };
>>> +
>>> + opp-300000000 {
>>> + opp-hz = /bits/ 64 <300000000>;
>>> + required-opps = <&rpmhpd_opp_svs>;
>>> + };
>>> +
>>> + opp-345000000 {
>>> + opp-hz = /bits/ 64 <345000000>;
>>> + required-opps = <&rpmhpd_opp_svs_l1>;
>>> + };
>>> +
>>> + opp-460000000 {
>>> + opp-hz = /bits/ 64 <460000000>;
>>> + required-opps = <&rpmhpd_opp_nom>;
>>> + };
>>> + };
>>> + };
>>> +
>>> + dsi0: dsi@ae94000 {
>>> + compatible = "qcom,mdss-dsi-ctrl";
>>> + reg = <0 0x0ae94000 0 0x400>;
>>> + reg-names = "dsi_ctrl";
>>> +
>>> + interrupt-parent = <&mdss>;
>>> + interrupts = <4>;
>>> +
>>> + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
>>> + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
>>> + <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
>>> + <&dispcc DISP_CC_MDSS_ESC0_CLK>,
>>> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
>>> + <&gcc GCC_DISP_HF_AXI_CLK>;
>>> + clock-names = "byte",
>>> + "byte_intf",
>>> + "pixel",
>>> + "core",
>>> + "iface",
>>> + "bus";
>>> +
>>> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
>>> + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
>>> + assigned-clock-parents = <&dsi0_phy 0>,
>>> + <&dsi0_phy 1>;
>>> +
>>> + operating-points-v2 = <&dsi_opp_table>;
>>> + power-domains = <&rpmhpd SM8350_MMCX>;
>>> +
>>> + phys = <&dsi0_phy>;
>>> + phy-names = "dsi";
>> I think that was dropped as of late.
>
> Ack
>
>>
>>> +
>>> + status = "disabled";
>>> +
>>> + ports {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + port@0 {
>>> + reg = <0>;
>>> + dsi0_in: endpoint {
>>> + remote-endpoint = <&dpu_intf1_out>;
>>> + };
>>> + };
>>> +
>>> + port@1 {
>>> + reg = <1>;
>>> + dsi0_out: endpoint {
>>> + };
>>> + };
>>> + };
>>> + };
>>> +
>>> + dsi0_phy: phy@ae94400 {
>>> + compatible = "qcom,dsi-phy-5nm-8350";
>>> + reg = <0 0x0ae94400 0 0x200>,
>>> + <0 0x0ae94600 0 0x280>,
>>> + <0 0x0ae94900 0 0x260>;
>>> + reg-names = "dsi_phy",
>>> + "dsi_phy_lane",
>>> + "dsi_pll";
>>> +
>>> + #clock-cells = <1>;
>>> + #phy-cells = <0>;
>>> +
>>> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
>>> + <&rpmhcc RPMH_CXO_CLK>;
>>> + clock-names = "iface", "ref";
>>> +
>>> + status = "disabled";
>>> +
>>> + dsi_opp_table: dsi-opp-table {
>>> + compatible = "operating-points-v2";
>>> +
>>> + opp-187500000 {
>>> + opp-hz = /bits/ 64 <187500000>;
>>> + required-opps = <&rpmhpd_opp_low_svs>;
>>> + };
>>> +
>>> + opp-300000000 {
>>> + opp-hz = /bits/ 64 <300000000>;
>>> + required-opps = <&rpmhpd_opp_svs>;
>>> + };
>>> +
>>> + opp-358000000 {
>>> + opp-hz = /bits/ 64 <358000000>;
>>> + required-opps = <&rpmhpd_opp_svs_l1>;
>>> + };
>>> + };
>>> + };
>>> + };
>>> +
>>> dispcc: clock-controller@af00000 {
>>> compatible = "qcom,sm8350-dispcc";
>>> reg = <0 0x0af00000 0 0x10000>;
>>> clocks = <&rpmhcc RPMH_CXO_CLK>,
>>> - <0>,
>>> - <0>,
>>> - <0>,
>>> - <0>,
>>> + <&dsi0_phy 0>, <&dsi0_phy 1>,
>>> + <0>, <0>,
>>> <0>,
>>> <0>;
>>> clock-names = "bi_tcxo",
>>> @@ -2558,6 +2746,7 @@ dispcc: clock-controller@af00000 {
>>> #power-domain-cells = <1>;
>>>
>>> power-domains = <&rpmhpd SM8350_MMCX>;
>>> + required-opps = <&rpmhpd_opp_turbo>;
>> A turbo vote is required for it to function? Seems a bit high..
>
> Dmitry hit a snag using &rpmhpd_opp_low_svs, so this was a dummy
> value. I can't replicate that issue, but am having a conversation with
> him off-list about this.
>
> On my sm8350-hdk board &rpmhpd_opp_low_svs is working fine.
Maybe this is related to the bootloader setting up the mode or maybe it
was caused by the fact that I have the drm_msm set up as built-in rather
than a module.
>
>>
>> Konrad
>>> };
>>>
>>> adsp: remoteproc@17300000 {
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v2 11/12] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
` (9 preceding siblings ...)
2022-11-15 13:31 ` [PATCH v2 10/12] arm64: dts: qcom: sm8350: Add display system nodes Robert Foss
@ 2022-11-15 13:31 ` Robert Foss
2022-11-15 13:31 ` [PATCH v2 12/12] arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge Robert Foss
2022-11-15 15:23 ` [PATCH v2 00/12] Enable Display for SM8350 Krzysztof Kozlowski
12 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:31 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
Enable the display subsystem and the dsi0 output for
the sm8350-hdk board.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index e6deb08c6da0..39462c659c58 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -213,10 +213,32 @@ &cdsp {
firmware-name = "qcom/sm8350/cdsp.mbn";
};
+&dispcc {
+ status = "okay";
+};
+
+&dsi0 {
+ vdda-supply = <&vreg_l6b_1p2>;
+ status = "okay";
+};
+
+&dsi0_phy {
+ vdds-supply = <&vreg_l5b_0p88>;
+ status = "okay";
+};
+
&gpi_dma1 {
status = "okay";
};
+&mdss {
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
&mpss {
status = "okay";
firmware-name = "qcom/sm8350/modem.mbn";
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* [PATCH v2 12/12] arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
` (10 preceding siblings ...)
2022-11-15 13:31 ` [PATCH v2 11/12] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes Robert Foss
@ 2022-11-15 13:31 ` Robert Foss
2022-11-15 15:23 ` [PATCH v2 00/12] Enable Display for SM8350 Krzysztof Kozlowski
12 siblings, 0 replies; 34+ messages in thread
From: Robert Foss @ 2022-11-15 13:31 UTC (permalink / raw)
To: robdclark, quic_abhinavk, dmitry.baryshkov, sean, airlied,
daniel, robh+dt, krzysztof.kozlowski+dt, agross, bjorn.andersson,
konrad.dybcio, quic_kalyant, swboyd, robert.foss,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
The sm8350-hdk ships with the LT9611 UXC DSI/HDMI bridge chip.
In order to toggle the board to enable the HDMI output,
switch #7 & #8 on the rightmost multi-switch package have
to be toggled to On.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 105 ++++++++++++++++++++++++
1 file changed, 105 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 39462c659c58..3aa4ca8271e5 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -20,6 +20,17 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <<9611_out>;
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -29,6 +40,31 @@ vph_pwr: vph-pwr-regulator {
regulator-always-on;
regulator-boot-on;
};
+
+ lt9611_1v2: lt9611-1v2-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "LT9611_1V2";
+
+ vin-supply = <&vph_pwr>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ lt9611_3v3: lt9611-3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "LT9611_3V3";
+
+ vin-supply = <&vreg_bob>;
+ gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&adsp {
@@ -220,6 +256,15 @@ &dispcc {
&dsi0 {
vdda-supply = <&vreg_l6b_1p2>;
status = "okay";
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <<9611_a>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
};
&dsi0_phy {
@@ -231,6 +276,46 @@ &gpi_dma1 {
status = "okay";
};
+&i2c15 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ lt9611_codec: hdmi-bridge@2b {
+ compatible = "lontium,lt9611uxc";
+ reg = <0x2b>;
+
+ interrupts-extended = <&tlmm 50 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <<9611_1v2>;
+ vcc-supply = <<9611_3v3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <<9611_state>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lt9611_a: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ lt9611_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
&mdss {
status = "okay";
};
@@ -248,6 +333,10 @@ &qupv3_id_0 {
status = "okay";
};
+&qupv3_id_2 {
+ status = "okay";
+};
+
&slpi {
status = "okay";
firmware-name = "qcom/sm8350/slpi.mbn";
@@ -544,4 +633,20 @@ usb_hub_enabled_state: usb-hub-enabled-state {
drive-strength = <2>;
output-low;
};
+
+ lt9611_state: lt9611-state {
+ lt9611_rst_pin {
+ pins = "gpio48";
+ function = "normal";
+
+ output-high;
+ input-disable;
+ };
+
+ lt9611_irq_pin {
+ pins = "gpio50";
+ function = "gpio";
+ bias-disable;
+ };
+ };
};
--
2.34.1
^ permalink raw reply related [flat|nested] 34+ messages in thread* Re: [PATCH v2 00/12] Enable Display for SM8350
2022-11-15 13:30 [PATCH v2 00/12] Enable Display for SM8350 Robert Foss
` (11 preceding siblings ...)
2022-11-15 13:31 ` [PATCH v2 12/12] arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge Robert Foss
@ 2022-11-15 15:23 ` Krzysztof Kozlowski
12 siblings, 0 replies; 34+ messages in thread
From: Krzysztof Kozlowski @ 2022-11-15 15:23 UTC (permalink / raw)
To: Robert Foss, robdclark, quic_abhinavk, dmitry.baryshkov, sean,
airlied, daniel, robh+dt, krzysztof.kozlowski+dt, agross,
bjorn.andersson, konrad.dybcio, quic_kalyant, swboyd,
angelogioacchino.delregno, loic.poulain, quic_khsieh,
quic_vpolimer, vkoul, dianders, linux-arm-msm, dri-devel,
freedreno, devicetree, linux-kernel, Jonathan Marek, vinod.koul,
quic_jesszhan, andersson
On 15/11/2022 14:30, Robert Foss wrote:
> Dependencies:
> https://lore.kernel.org/all/20221102231309.583587-1-dmitry.baryshkov@linaro.org/
> https://lore.kernel.org/all/20221024164225.3236654-1-dmitry.baryshkov@linaro.org/
> https://lore.kernel.org/all/20221104130324.1024242-5-dmitry.baryshkov@linaro.org/
>
> Branch:
> https://git.linaro.org/people/robert.foss/linux.git/log/?h=sm8350_dsi_v2
>
> This series implements display support for SM8350 and
> enables HDMI output for the SM8350-HDK platform.
>
I received two of these patchsets... Which one is valid? Folks also
review in both...
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 34+ messages in thread