* [PATCH v2 0/2] mmc: atmel-mci: Convert to gpio descriptors
@ 2022-11-17 4:14 ` Balamanikandan Gunasundar
0 siblings, 0 replies; 8+ messages in thread
From: Balamanikandan Gunasundar @ 2022-11-17 4:14 UTC (permalink / raw)
To: ludovic.desroches, ulf.hansson, nicolas.ferre, alexandre.belloni,
3chas3, linux-kernel, linux-mmc, linux-arm-kernel,
linux-atm-general, netdev, linus.walleij, hari.prasathge
Cc: balamanikandan.gunasundar
Changes in v2:
[PATCH 1/2] mmc: atmel-mci: Convert to gpio descriptors
- Remove "#include <linux/gpio.h>" as it is not necessary
[PATCH 2/2] mmc: atmel-mci: move atmel MCI header file
- Move linux/atmel-mci.h into drivers/mmc/host/atmel-mci.c as it is
used only by one file
Balamanikandan Gunasundar (2):
mmc: atmel-mci: Convert to gpio descriptors
mmc: atmel-mci: move atmel MCI header file
drivers/mmc/host/atmel-mci.c | 119 ++++++++++++++++++++++-------------
include/linux/atmel-mci.h | 46 --------------
2 files changed, 77 insertions(+), 88 deletions(-)
delete mode 100644 include/linux/atmel-mci.h
--
2.25.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 0/2] mmc: atmel-mci: Convert to gpio descriptors
@ 2022-11-17 4:14 ` Balamanikandan Gunasundar
0 siblings, 0 replies; 8+ messages in thread
From: Balamanikandan Gunasundar @ 2022-11-17 4:14 UTC (permalink / raw)
To: ludovic.desroches, ulf.hansson, nicolas.ferre, alexandre.belloni,
3chas3, linux-kernel, linux-mmc, linux-arm-kernel,
linux-atm-general, netdev, linus.walleij, hari.prasathge
Cc: balamanikandan.gunasundar
Changes in v2:
[PATCH 1/2] mmc: atmel-mci: Convert to gpio descriptors
- Remove "#include <linux/gpio.h>" as it is not necessary
[PATCH 2/2] mmc: atmel-mci: move atmel MCI header file
- Move linux/atmel-mci.h into drivers/mmc/host/atmel-mci.c as it is
used only by one file
Balamanikandan Gunasundar (2):
mmc: atmel-mci: Convert to gpio descriptors
mmc: atmel-mci: move atmel MCI header file
drivers/mmc/host/atmel-mci.c | 119 ++++++++++++++++++++++-------------
include/linux/atmel-mci.h | 46 --------------
2 files changed, 77 insertions(+), 88 deletions(-)
delete mode 100644 include/linux/atmel-mci.h
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 1/2] mmc: atmel-mci: Convert to gpio descriptors
2022-11-17 4:14 ` Balamanikandan Gunasundar
@ 2022-11-17 4:14 ` Balamanikandan Gunasundar
-1 siblings, 0 replies; 8+ messages in thread
From: Balamanikandan Gunasundar @ 2022-11-17 4:14 UTC (permalink / raw)
To: ludovic.desroches, ulf.hansson, nicolas.ferre, alexandre.belloni,
3chas3, linux-kernel, linux-mmc, linux-arm-kernel,
linux-atm-general, netdev, linus.walleij, hari.prasathge
Cc: balamanikandan.gunasundar
Replace the legacy GPIO APIs with gpio descriptor consumer interface.
To maintain backward compatibility, we rely on the "cd-inverted"
property to manage the invertion flag instead of GPIO property.
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
---
drivers/mmc/host/atmel-mci.c | 80 ++++++++++++++++++------------------
include/linux/atmel-mci.h | 4 +-
2 files changed, 41 insertions(+), 43 deletions(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 67b2cd166e56..f6194aab17df 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -11,7 +11,6 @@
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
-#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -19,7 +18,8 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
+#include <linux/irq.h>
+#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
#include <linux/seq_file.h>
@@ -389,8 +389,8 @@ struct atmel_mci_slot {
#define ATMCI_CARD_NEED_INIT 1
#define ATMCI_SHUTDOWN 2
- int detect_pin;
- int wp_pin;
+ struct gpio_desc *detect_pin;
+ struct gpio_desc *wp_pin;
bool detect_is_active_high;
struct timer_list detect_timer;
@@ -638,7 +638,11 @@ atmci_of_init(struct platform_device *pdev)
pdata->slot[slot_id].bus_width = 1;
pdata->slot[slot_id].detect_pin =
- of_get_named_gpio(cnp, "cd-gpios", 0);
+ devm_gpiod_get_from_of_node(&pdev->dev, cnp,
+ "cd-gpios",
+ 0, GPIOD_IN, "cd-gpios");
+ if (IS_ERR(pdata->slot[slot_id].detect_pin))
+ pdata->slot[slot_id].detect_pin = NULL;
pdata->slot[slot_id].detect_is_active_high =
of_property_read_bool(cnp, "cd-inverted");
@@ -647,7 +651,11 @@ atmci_of_init(struct platform_device *pdev)
of_property_read_bool(cnp, "non-removable");
pdata->slot[slot_id].wp_pin =
- of_get_named_gpio(cnp, "wp-gpios", 0);
+ devm_gpiod_get_from_of_node(&pdev->dev, cnp,
+ "wp-gpios",
+ 0, GPIOD_IN, "wp-gpios");
+ if (IS_ERR(pdata->slot[slot_id].wp_pin))
+ pdata->slot[slot_id].wp_pin = NULL;
}
return pdata;
@@ -1511,8 +1519,8 @@ static int atmci_get_ro(struct mmc_host *mmc)
int read_only = -ENOSYS;
struct atmel_mci_slot *slot = mmc_priv(mmc);
- if (gpio_is_valid(slot->wp_pin)) {
- read_only = gpio_get_value(slot->wp_pin);
+ if (slot->wp_pin) {
+ read_only = gpiod_get_value(slot->wp_pin);
dev_dbg(&mmc->class_dev, "card is %s\n",
read_only ? "read-only" : "read-write");
}
@@ -1525,8 +1533,8 @@ static int atmci_get_cd(struct mmc_host *mmc)
int present = -ENOSYS;
struct atmel_mci_slot *slot = mmc_priv(mmc);
- if (gpio_is_valid(slot->detect_pin)) {
- present = !(gpio_get_value(slot->detect_pin) ^
+ if (slot->detect_pin) {
+ present = !(gpiod_get_raw_value(slot->detect_pin) ^
slot->detect_is_active_high);
dev_dbg(&mmc->class_dev, "card is %spresent\n",
present ? "" : "not ");
@@ -1639,8 +1647,8 @@ static void atmci_detect_change(struct timer_list *t)
if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
return;
- enable_irq(gpio_to_irq(slot->detect_pin));
- present = !(gpio_get_value(slot->detect_pin) ^
+ enable_irq(gpiod_to_irq(slot->detect_pin));
+ present = !(gpiod_get_raw_value(slot->detect_pin) ^
slot->detect_is_active_high);
present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
@@ -2241,9 +2249,9 @@ static int atmci_init_slot(struct atmel_mci *host,
dev_dbg(&mmc->class_dev,
"slot[%u]: bus_width=%u, detect_pin=%d, "
"detect_is_active_high=%s, wp_pin=%d\n",
- id, slot_data->bus_width, slot_data->detect_pin,
+ id, slot_data->bus_width, desc_to_gpio(slot_data->detect_pin),
slot_data->detect_is_active_high ? "true" : "false",
- slot_data->wp_pin);
+ desc_to_gpio(slot_data->wp_pin));
mmc->ops = &atmci_ops;
mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
@@ -2279,51 +2287,43 @@ static int atmci_init_slot(struct atmel_mci *host,
/* Assume card is present initially */
set_bit(ATMCI_CARD_PRESENT, &slot->flags);
- if (gpio_is_valid(slot->detect_pin)) {
- if (devm_gpio_request(&host->pdev->dev, slot->detect_pin,
- "mmc_detect")) {
- dev_dbg(&mmc->class_dev, "no detect pin available\n");
- slot->detect_pin = -EBUSY;
- } else if (gpio_get_value(slot->detect_pin) ^
- slot->detect_is_active_high) {
+ if (slot->detect_pin) {
+ if (gpiod_get_raw_value(slot->detect_pin) ^
+ slot->detect_is_active_high) {
clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
}
+ } else {
+ dev_dbg(&mmc->class_dev, "no detect pin available\n");
}
- if (!gpio_is_valid(slot->detect_pin)) {
+ if (!slot->detect_pin) {
if (slot_data->non_removable)
mmc->caps |= MMC_CAP_NONREMOVABLE;
else
mmc->caps |= MMC_CAP_NEEDS_POLL;
}
- if (gpio_is_valid(slot->wp_pin)) {
- if (devm_gpio_request(&host->pdev->dev, slot->wp_pin,
- "mmc_wp")) {
- dev_dbg(&mmc->class_dev, "no WP pin available\n");
- slot->wp_pin = -EBUSY;
- }
- }
+ if (!slot->wp_pin)
+ dev_dbg(&mmc->class_dev, "no WP pin available\n");
host->slot[id] = slot;
mmc_regulator_get_supply(mmc);
- mmc_pwrseq_alloc(slot->mmc);
mmc_add_host(mmc);
- if (gpio_is_valid(slot->detect_pin)) {
+ if (slot->detect_pin) {
int ret;
timer_setup(&slot->detect_timer, atmci_detect_change, 0);
- ret = request_irq(gpio_to_irq(slot->detect_pin),
- atmci_detect_interrupt,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "mmc-detect", slot);
+ ret = request_irq(gpiod_to_irq(slot->detect_pin),
+ atmci_detect_interrupt,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "mmc-detect", slot);
if (ret) {
dev_dbg(&mmc->class_dev,
"could not request IRQ %d for detect pin\n",
- gpio_to_irq(slot->detect_pin));
- slot->detect_pin = -EBUSY;
+ gpiod_to_irq(slot->detect_pin));
+ slot->detect_pin = NULL;
}
}
@@ -2342,10 +2342,8 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
mmc_remove_host(slot->mmc);
- if (gpio_is_valid(slot->detect_pin)) {
- int pin = slot->detect_pin;
-
- free_irq(gpio_to_irq(pin), slot);
+ if (slot->detect_pin) {
+ free_irq(gpiod_to_irq(slot->detect_pin), slot);
del_timer_sync(&slot->detect_timer);
}
diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
index 1491af38cc6e..017e7d8f6126 100644
--- a/include/linux/atmel-mci.h
+++ b/include/linux/atmel-mci.h
@@ -26,8 +26,8 @@
*/
struct mci_slot_pdata {
unsigned int bus_width;
- int detect_pin;
- int wp_pin;
+ struct gpio_desc *detect_pin;
+ struct gpio_desc *wp_pin;
bool detect_is_active_high;
bool non_removable;
};
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 1/2] mmc: atmel-mci: Convert to gpio descriptors
@ 2022-11-17 4:14 ` Balamanikandan Gunasundar
0 siblings, 0 replies; 8+ messages in thread
From: Balamanikandan Gunasundar @ 2022-11-17 4:14 UTC (permalink / raw)
To: ludovic.desroches, ulf.hansson, nicolas.ferre, alexandre.belloni,
3chas3, linux-kernel, linux-mmc, linux-arm-kernel,
linux-atm-general, netdev, linus.walleij, hari.prasathge
Cc: balamanikandan.gunasundar
Replace the legacy GPIO APIs with gpio descriptor consumer interface.
To maintain backward compatibility, we rely on the "cd-inverted"
property to manage the invertion flag instead of GPIO property.
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
---
drivers/mmc/host/atmel-mci.c | 80 ++++++++++++++++++------------------
include/linux/atmel-mci.h | 4 +-
2 files changed, 41 insertions(+), 43 deletions(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 67b2cd166e56..f6194aab17df 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -11,7 +11,6 @@
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
-#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -19,7 +18,8 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
+#include <linux/irq.h>
+#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
#include <linux/seq_file.h>
@@ -389,8 +389,8 @@ struct atmel_mci_slot {
#define ATMCI_CARD_NEED_INIT 1
#define ATMCI_SHUTDOWN 2
- int detect_pin;
- int wp_pin;
+ struct gpio_desc *detect_pin;
+ struct gpio_desc *wp_pin;
bool detect_is_active_high;
struct timer_list detect_timer;
@@ -638,7 +638,11 @@ atmci_of_init(struct platform_device *pdev)
pdata->slot[slot_id].bus_width = 1;
pdata->slot[slot_id].detect_pin =
- of_get_named_gpio(cnp, "cd-gpios", 0);
+ devm_gpiod_get_from_of_node(&pdev->dev, cnp,
+ "cd-gpios",
+ 0, GPIOD_IN, "cd-gpios");
+ if (IS_ERR(pdata->slot[slot_id].detect_pin))
+ pdata->slot[slot_id].detect_pin = NULL;
pdata->slot[slot_id].detect_is_active_high =
of_property_read_bool(cnp, "cd-inverted");
@@ -647,7 +651,11 @@ atmci_of_init(struct platform_device *pdev)
of_property_read_bool(cnp, "non-removable");
pdata->slot[slot_id].wp_pin =
- of_get_named_gpio(cnp, "wp-gpios", 0);
+ devm_gpiod_get_from_of_node(&pdev->dev, cnp,
+ "wp-gpios",
+ 0, GPIOD_IN, "wp-gpios");
+ if (IS_ERR(pdata->slot[slot_id].wp_pin))
+ pdata->slot[slot_id].wp_pin = NULL;
}
return pdata;
@@ -1511,8 +1519,8 @@ static int atmci_get_ro(struct mmc_host *mmc)
int read_only = -ENOSYS;
struct atmel_mci_slot *slot = mmc_priv(mmc);
- if (gpio_is_valid(slot->wp_pin)) {
- read_only = gpio_get_value(slot->wp_pin);
+ if (slot->wp_pin) {
+ read_only = gpiod_get_value(slot->wp_pin);
dev_dbg(&mmc->class_dev, "card is %s\n",
read_only ? "read-only" : "read-write");
}
@@ -1525,8 +1533,8 @@ static int atmci_get_cd(struct mmc_host *mmc)
int present = -ENOSYS;
struct atmel_mci_slot *slot = mmc_priv(mmc);
- if (gpio_is_valid(slot->detect_pin)) {
- present = !(gpio_get_value(slot->detect_pin) ^
+ if (slot->detect_pin) {
+ present = !(gpiod_get_raw_value(slot->detect_pin) ^
slot->detect_is_active_high);
dev_dbg(&mmc->class_dev, "card is %spresent\n",
present ? "" : "not ");
@@ -1639,8 +1647,8 @@ static void atmci_detect_change(struct timer_list *t)
if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
return;
- enable_irq(gpio_to_irq(slot->detect_pin));
- present = !(gpio_get_value(slot->detect_pin) ^
+ enable_irq(gpiod_to_irq(slot->detect_pin));
+ present = !(gpiod_get_raw_value(slot->detect_pin) ^
slot->detect_is_active_high);
present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
@@ -2241,9 +2249,9 @@ static int atmci_init_slot(struct atmel_mci *host,
dev_dbg(&mmc->class_dev,
"slot[%u]: bus_width=%u, detect_pin=%d, "
"detect_is_active_high=%s, wp_pin=%d\n",
- id, slot_data->bus_width, slot_data->detect_pin,
+ id, slot_data->bus_width, desc_to_gpio(slot_data->detect_pin),
slot_data->detect_is_active_high ? "true" : "false",
- slot_data->wp_pin);
+ desc_to_gpio(slot_data->wp_pin));
mmc->ops = &atmci_ops;
mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
@@ -2279,51 +2287,43 @@ static int atmci_init_slot(struct atmel_mci *host,
/* Assume card is present initially */
set_bit(ATMCI_CARD_PRESENT, &slot->flags);
- if (gpio_is_valid(slot->detect_pin)) {
- if (devm_gpio_request(&host->pdev->dev, slot->detect_pin,
- "mmc_detect")) {
- dev_dbg(&mmc->class_dev, "no detect pin available\n");
- slot->detect_pin = -EBUSY;
- } else if (gpio_get_value(slot->detect_pin) ^
- slot->detect_is_active_high) {
+ if (slot->detect_pin) {
+ if (gpiod_get_raw_value(slot->detect_pin) ^
+ slot->detect_is_active_high) {
clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
}
+ } else {
+ dev_dbg(&mmc->class_dev, "no detect pin available\n");
}
- if (!gpio_is_valid(slot->detect_pin)) {
+ if (!slot->detect_pin) {
if (slot_data->non_removable)
mmc->caps |= MMC_CAP_NONREMOVABLE;
else
mmc->caps |= MMC_CAP_NEEDS_POLL;
}
- if (gpio_is_valid(slot->wp_pin)) {
- if (devm_gpio_request(&host->pdev->dev, slot->wp_pin,
- "mmc_wp")) {
- dev_dbg(&mmc->class_dev, "no WP pin available\n");
- slot->wp_pin = -EBUSY;
- }
- }
+ if (!slot->wp_pin)
+ dev_dbg(&mmc->class_dev, "no WP pin available\n");
host->slot[id] = slot;
mmc_regulator_get_supply(mmc);
- mmc_pwrseq_alloc(slot->mmc);
mmc_add_host(mmc);
- if (gpio_is_valid(slot->detect_pin)) {
+ if (slot->detect_pin) {
int ret;
timer_setup(&slot->detect_timer, atmci_detect_change, 0);
- ret = request_irq(gpio_to_irq(slot->detect_pin),
- atmci_detect_interrupt,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "mmc-detect", slot);
+ ret = request_irq(gpiod_to_irq(slot->detect_pin),
+ atmci_detect_interrupt,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "mmc-detect", slot);
if (ret) {
dev_dbg(&mmc->class_dev,
"could not request IRQ %d for detect pin\n",
- gpio_to_irq(slot->detect_pin));
- slot->detect_pin = -EBUSY;
+ gpiod_to_irq(slot->detect_pin));
+ slot->detect_pin = NULL;
}
}
@@ -2342,10 +2342,8 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
mmc_remove_host(slot->mmc);
- if (gpio_is_valid(slot->detect_pin)) {
- int pin = slot->detect_pin;
-
- free_irq(gpio_to_irq(pin), slot);
+ if (slot->detect_pin) {
+ free_irq(gpiod_to_irq(slot->detect_pin), slot);
del_timer_sync(&slot->detect_timer);
}
diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
index 1491af38cc6e..017e7d8f6126 100644
--- a/include/linux/atmel-mci.h
+++ b/include/linux/atmel-mci.h
@@ -26,8 +26,8 @@
*/
struct mci_slot_pdata {
unsigned int bus_width;
- int detect_pin;
- int wp_pin;
+ struct gpio_desc *detect_pin;
+ struct gpio_desc *wp_pin;
bool detect_is_active_high;
bool non_removable;
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 2/2] mmc: atmel-mci: move atmel MCI header file
2022-11-17 4:14 ` Balamanikandan Gunasundar
@ 2022-11-17 4:14 ` Balamanikandan Gunasundar
-1 siblings, 0 replies; 8+ messages in thread
From: Balamanikandan Gunasundar @ 2022-11-17 4:14 UTC (permalink / raw)
To: ludovic.desroches, ulf.hansson, nicolas.ferre, alexandre.belloni,
3chas3, linux-kernel, linux-mmc, linux-arm-kernel,
linux-atm-general, netdev, linus.walleij, hari.prasathge
Cc: balamanikandan.gunasundar
Move the contents of linux/atmel-mci.h into
drivers/mmc/host/atmel-mci.c as it is only used in one file
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
---
drivers/mmc/host/atmel-mci.c | 39 +++++++++++++++++++++++++++++-
include/linux/atmel-mci.h | 46 ------------------------------------
2 files changed, 38 insertions(+), 47 deletions(-)
delete mode 100644 include/linux/atmel-mci.h
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index f6194aab17df..d1e2011f881b 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -30,7 +30,6 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sdio.h>
-#include <linux/atmel-mci.h>
#include <linux/atmel_pdc.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
@@ -41,6 +40,8 @@
#include <asm/unaligned.h>
#include "../core/pwrseq.h"
+#define ATMCI_MAX_NR_SLOTS 2
+
/*
* Superset of MCI IP registers integrated in Atmel AT91 Processor
* Registers and bitfields marked with [2] are only available in MCI2
@@ -202,6 +203,42 @@ enum atmci_pdc_buf {
PDC_SECOND_BUF,
};
+/**
+ * struct mci_slot_pdata - board-specific per-slot configuration
+ * @bus_width: Number of data lines wired up the slot
+ * @detect_pin: GPIO pin wired to the card detect switch
+ * @wp_pin: GPIO pin wired to the write protect sensor
+ * @detect_is_active_high: The state of the detect pin when it is active
+ * @non_removable: The slot is not removable, only detect once
+ *
+ * If a given slot is not present on the board, @bus_width should be
+ * set to 0. The other fields are ignored in this case.
+ *
+ * Any pins that aren't available should be set to a negative value.
+ *
+ * Note that support for multiple slots is experimental -- some cards
+ * might get upset if we don't get the clock management exactly right.
+ * But in most cases, it should work just fine.
+ */
+struct mci_slot_pdata {
+ unsigned int bus_width;
+ struct gpio_desc *detect_pin;
+ struct gpio_desc *wp_pin;
+ bool detect_is_active_high;
+ bool non_removable;
+};
+
+/**
+ * struct mci_platform_data - board-specific MMC/SDcard configuration
+ * @dma_slave: DMA slave interface to use in data transfers.
+ * @slot: Per-slot configuration data.
+ */
+struct mci_platform_data {
+ void *dma_slave;
+ dma_filter_fn dma_filter;
+ struct mci_slot_pdata slot[ATMCI_MAX_NR_SLOTS];
+};
+
struct atmel_mci_caps {
bool has_dma_conf_reg;
bool has_pdc;
diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
deleted file mode 100644
index 017e7d8f6126..000000000000
--- a/include/linux/atmel-mci.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __LINUX_ATMEL_MCI_H
-#define __LINUX_ATMEL_MCI_H
-
-#include <linux/types.h>
-#include <linux/dmaengine.h>
-
-#define ATMCI_MAX_NR_SLOTS 2
-
-/**
- * struct mci_slot_pdata - board-specific per-slot configuration
- * @bus_width: Number of data lines wired up the slot
- * @detect_pin: GPIO pin wired to the card detect switch
- * @wp_pin: GPIO pin wired to the write protect sensor
- * @detect_is_active_high: The state of the detect pin when it is active
- * @non_removable: The slot is not removable, only detect once
- *
- * If a given slot is not present on the board, @bus_width should be
- * set to 0. The other fields are ignored in this case.
- *
- * Any pins that aren't available should be set to a negative value.
- *
- * Note that support for multiple slots is experimental -- some cards
- * might get upset if we don't get the clock management exactly right.
- * But in most cases, it should work just fine.
- */
-struct mci_slot_pdata {
- unsigned int bus_width;
- struct gpio_desc *detect_pin;
- struct gpio_desc *wp_pin;
- bool detect_is_active_high;
- bool non_removable;
-};
-
-/**
- * struct mci_platform_data - board-specific MMC/SDcard configuration
- * @dma_slave: DMA slave interface to use in data transfers.
- * @slot: Per-slot configuration data.
- */
-struct mci_platform_data {
- void *dma_slave;
- dma_filter_fn dma_filter;
- struct mci_slot_pdata slot[ATMCI_MAX_NR_SLOTS];
-};
-
-#endif /* __LINUX_ATMEL_MCI_H */
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 2/2] mmc: atmel-mci: move atmel MCI header file
@ 2022-11-17 4:14 ` Balamanikandan Gunasundar
0 siblings, 0 replies; 8+ messages in thread
From: Balamanikandan Gunasundar @ 2022-11-17 4:14 UTC (permalink / raw)
To: ludovic.desroches, ulf.hansson, nicolas.ferre, alexandre.belloni,
3chas3, linux-kernel, linux-mmc, linux-arm-kernel,
linux-atm-general, netdev, linus.walleij, hari.prasathge
Cc: balamanikandan.gunasundar
Move the contents of linux/atmel-mci.h into
drivers/mmc/host/atmel-mci.c as it is only used in one file
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
---
drivers/mmc/host/atmel-mci.c | 39 +++++++++++++++++++++++++++++-
include/linux/atmel-mci.h | 46 ------------------------------------
2 files changed, 38 insertions(+), 47 deletions(-)
delete mode 100644 include/linux/atmel-mci.h
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index f6194aab17df..d1e2011f881b 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -30,7 +30,6 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sdio.h>
-#include <linux/atmel-mci.h>
#include <linux/atmel_pdc.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
@@ -41,6 +40,8 @@
#include <asm/unaligned.h>
#include "../core/pwrseq.h"
+#define ATMCI_MAX_NR_SLOTS 2
+
/*
* Superset of MCI IP registers integrated in Atmel AT91 Processor
* Registers and bitfields marked with [2] are only available in MCI2
@@ -202,6 +203,42 @@ enum atmci_pdc_buf {
PDC_SECOND_BUF,
};
+/**
+ * struct mci_slot_pdata - board-specific per-slot configuration
+ * @bus_width: Number of data lines wired up the slot
+ * @detect_pin: GPIO pin wired to the card detect switch
+ * @wp_pin: GPIO pin wired to the write protect sensor
+ * @detect_is_active_high: The state of the detect pin when it is active
+ * @non_removable: The slot is not removable, only detect once
+ *
+ * If a given slot is not present on the board, @bus_width should be
+ * set to 0. The other fields are ignored in this case.
+ *
+ * Any pins that aren't available should be set to a negative value.
+ *
+ * Note that support for multiple slots is experimental -- some cards
+ * might get upset if we don't get the clock management exactly right.
+ * But in most cases, it should work just fine.
+ */
+struct mci_slot_pdata {
+ unsigned int bus_width;
+ struct gpio_desc *detect_pin;
+ struct gpio_desc *wp_pin;
+ bool detect_is_active_high;
+ bool non_removable;
+};
+
+/**
+ * struct mci_platform_data - board-specific MMC/SDcard configuration
+ * @dma_slave: DMA slave interface to use in data transfers.
+ * @slot: Per-slot configuration data.
+ */
+struct mci_platform_data {
+ void *dma_slave;
+ dma_filter_fn dma_filter;
+ struct mci_slot_pdata slot[ATMCI_MAX_NR_SLOTS];
+};
+
struct atmel_mci_caps {
bool has_dma_conf_reg;
bool has_pdc;
diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
deleted file mode 100644
index 017e7d8f6126..000000000000
--- a/include/linux/atmel-mci.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __LINUX_ATMEL_MCI_H
-#define __LINUX_ATMEL_MCI_H
-
-#include <linux/types.h>
-#include <linux/dmaengine.h>
-
-#define ATMCI_MAX_NR_SLOTS 2
-
-/**
- * struct mci_slot_pdata - board-specific per-slot configuration
- * @bus_width: Number of data lines wired up the slot
- * @detect_pin: GPIO pin wired to the card detect switch
- * @wp_pin: GPIO pin wired to the write protect sensor
- * @detect_is_active_high: The state of the detect pin when it is active
- * @non_removable: The slot is not removable, only detect once
- *
- * If a given slot is not present on the board, @bus_width should be
- * set to 0. The other fields are ignored in this case.
- *
- * Any pins that aren't available should be set to a negative value.
- *
- * Note that support for multiple slots is experimental -- some cards
- * might get upset if we don't get the clock management exactly right.
- * But in most cases, it should work just fine.
- */
-struct mci_slot_pdata {
- unsigned int bus_width;
- struct gpio_desc *detect_pin;
- struct gpio_desc *wp_pin;
- bool detect_is_active_high;
- bool non_removable;
-};
-
-/**
- * struct mci_platform_data - board-specific MMC/SDcard configuration
- * @dma_slave: DMA slave interface to use in data transfers.
- * @slot: Per-slot configuration data.
- */
-struct mci_platform_data {
- void *dma_slave;
- dma_filter_fn dma_filter;
- struct mci_slot_pdata slot[ATMCI_MAX_NR_SLOTS];
-};
-
-#endif /* __LINUX_ATMEL_MCI_H */
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/2] mmc: atmel-mci: Convert to gpio descriptors
2022-11-17 4:14 ` Balamanikandan Gunasundar
@ 2022-11-18 9:20 ` Ulf Hansson
-1 siblings, 0 replies; 8+ messages in thread
From: Ulf Hansson @ 2022-11-18 9:20 UTC (permalink / raw)
To: Balamanikandan Gunasundar
Cc: ludovic.desroches, nicolas.ferre, alexandre.belloni,
linux-kernel, linux-mmc, linux-arm-kernel, linus.walleij,
hari.prasathge, Dmitry Torokhov
- trimmed cc-list, + Dmitry
On Thu, 17 Nov 2022 at 05:15, Balamanikandan Gunasundar
<balamanikandan.gunasundar@microchip.com> wrote:
>
> Replace the legacy GPIO APIs with gpio descriptor consumer interface.
>
> To maintain backward compatibility, we rely on the "cd-inverted"
> property to manage the invertion flag instead of GPIO property.
>
> Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Looks like you didn't make the conversion from
devm_gpiod_get_from_of_node() into devm_fwnode_gpiod_get(), that
Dmitry suggested [1]. Please re-spin and add Dmitry to the cc-list
next time, to allow him to complete the review.
Kind regards
Uffe
[1]
https://lore.kernel.org/all/Y21+L01BcPQ35FYi@google.com/
> ---
> drivers/mmc/host/atmel-mci.c | 80 ++++++++++++++++++------------------
> include/linux/atmel-mci.h | 4 +-
> 2 files changed, 41 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index 67b2cd166e56..f6194aab17df 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -11,7 +11,6 @@
> #include <linux/dmaengine.h>
> #include <linux/dma-mapping.h>
> #include <linux/err.h>
> -#include <linux/gpio.h>
> #include <linux/init.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> @@ -19,7 +18,8 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> -#include <linux/of_gpio.h>
> +#include <linux/irq.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/platform_device.h>
> #include <linux/scatterlist.h>
> #include <linux/seq_file.h>
> @@ -389,8 +389,8 @@ struct atmel_mci_slot {
> #define ATMCI_CARD_NEED_INIT 1
> #define ATMCI_SHUTDOWN 2
>
> - int detect_pin;
> - int wp_pin;
> + struct gpio_desc *detect_pin;
> + struct gpio_desc *wp_pin;
> bool detect_is_active_high;
>
> struct timer_list detect_timer;
> @@ -638,7 +638,11 @@ atmci_of_init(struct platform_device *pdev)
> pdata->slot[slot_id].bus_width = 1;
>
> pdata->slot[slot_id].detect_pin =
> - of_get_named_gpio(cnp, "cd-gpios", 0);
> + devm_gpiod_get_from_of_node(&pdev->dev, cnp,
> + "cd-gpios",
> + 0, GPIOD_IN, "cd-gpios");
> + if (IS_ERR(pdata->slot[slot_id].detect_pin))
> + pdata->slot[slot_id].detect_pin = NULL;
>
> pdata->slot[slot_id].detect_is_active_high =
> of_property_read_bool(cnp, "cd-inverted");
> @@ -647,7 +651,11 @@ atmci_of_init(struct platform_device *pdev)
> of_property_read_bool(cnp, "non-removable");
>
> pdata->slot[slot_id].wp_pin =
> - of_get_named_gpio(cnp, "wp-gpios", 0);
> + devm_gpiod_get_from_of_node(&pdev->dev, cnp,
> + "wp-gpios",
> + 0, GPIOD_IN, "wp-gpios");
> + if (IS_ERR(pdata->slot[slot_id].wp_pin))
> + pdata->slot[slot_id].wp_pin = NULL;
> }
>
> return pdata;
> @@ -1511,8 +1519,8 @@ static int atmci_get_ro(struct mmc_host *mmc)
> int read_only = -ENOSYS;
> struct atmel_mci_slot *slot = mmc_priv(mmc);
>
> - if (gpio_is_valid(slot->wp_pin)) {
> - read_only = gpio_get_value(slot->wp_pin);
> + if (slot->wp_pin) {
> + read_only = gpiod_get_value(slot->wp_pin);
> dev_dbg(&mmc->class_dev, "card is %s\n",
> read_only ? "read-only" : "read-write");
> }
> @@ -1525,8 +1533,8 @@ static int atmci_get_cd(struct mmc_host *mmc)
> int present = -ENOSYS;
> struct atmel_mci_slot *slot = mmc_priv(mmc);
>
> - if (gpio_is_valid(slot->detect_pin)) {
> - present = !(gpio_get_value(slot->detect_pin) ^
> + if (slot->detect_pin) {
> + present = !(gpiod_get_raw_value(slot->detect_pin) ^
> slot->detect_is_active_high);
> dev_dbg(&mmc->class_dev, "card is %spresent\n",
> present ? "" : "not ");
> @@ -1639,8 +1647,8 @@ static void atmci_detect_change(struct timer_list *t)
> if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
> return;
>
> - enable_irq(gpio_to_irq(slot->detect_pin));
> - present = !(gpio_get_value(slot->detect_pin) ^
> + enable_irq(gpiod_to_irq(slot->detect_pin));
> + present = !(gpiod_get_raw_value(slot->detect_pin) ^
> slot->detect_is_active_high);
> present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
>
> @@ -2241,9 +2249,9 @@ static int atmci_init_slot(struct atmel_mci *host,
> dev_dbg(&mmc->class_dev,
> "slot[%u]: bus_width=%u, detect_pin=%d, "
> "detect_is_active_high=%s, wp_pin=%d\n",
> - id, slot_data->bus_width, slot_data->detect_pin,
> + id, slot_data->bus_width, desc_to_gpio(slot_data->detect_pin),
> slot_data->detect_is_active_high ? "true" : "false",
> - slot_data->wp_pin);
> + desc_to_gpio(slot_data->wp_pin));
>
> mmc->ops = &atmci_ops;
> mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
> @@ -2279,51 +2287,43 @@ static int atmci_init_slot(struct atmel_mci *host,
>
> /* Assume card is present initially */
> set_bit(ATMCI_CARD_PRESENT, &slot->flags);
> - if (gpio_is_valid(slot->detect_pin)) {
> - if (devm_gpio_request(&host->pdev->dev, slot->detect_pin,
> - "mmc_detect")) {
> - dev_dbg(&mmc->class_dev, "no detect pin available\n");
> - slot->detect_pin = -EBUSY;
> - } else if (gpio_get_value(slot->detect_pin) ^
> - slot->detect_is_active_high) {
> + if (slot->detect_pin) {
> + if (gpiod_get_raw_value(slot->detect_pin) ^
> + slot->detect_is_active_high) {
> clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
> }
> + } else {
> + dev_dbg(&mmc->class_dev, "no detect pin available\n");
> }
>
> - if (!gpio_is_valid(slot->detect_pin)) {
> + if (!slot->detect_pin) {
> if (slot_data->non_removable)
> mmc->caps |= MMC_CAP_NONREMOVABLE;
> else
> mmc->caps |= MMC_CAP_NEEDS_POLL;
> }
>
> - if (gpio_is_valid(slot->wp_pin)) {
> - if (devm_gpio_request(&host->pdev->dev, slot->wp_pin,
> - "mmc_wp")) {
> - dev_dbg(&mmc->class_dev, "no WP pin available\n");
> - slot->wp_pin = -EBUSY;
> - }
> - }
> + if (!slot->wp_pin)
> + dev_dbg(&mmc->class_dev, "no WP pin available\n");
>
> host->slot[id] = slot;
> mmc_regulator_get_supply(mmc);
> - mmc_pwrseq_alloc(slot->mmc);
> mmc_add_host(mmc);
>
> - if (gpio_is_valid(slot->detect_pin)) {
> + if (slot->detect_pin) {
> int ret;
>
> timer_setup(&slot->detect_timer, atmci_detect_change, 0);
>
> - ret = request_irq(gpio_to_irq(slot->detect_pin),
> - atmci_detect_interrupt,
> - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> - "mmc-detect", slot);
> + ret = request_irq(gpiod_to_irq(slot->detect_pin),
> + atmci_detect_interrupt,
> + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> + "mmc-detect", slot);
> if (ret) {
> dev_dbg(&mmc->class_dev,
> "could not request IRQ %d for detect pin\n",
> - gpio_to_irq(slot->detect_pin));
> - slot->detect_pin = -EBUSY;
> + gpiod_to_irq(slot->detect_pin));
> + slot->detect_pin = NULL;
> }
> }
>
> @@ -2342,10 +2342,8 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
>
> mmc_remove_host(slot->mmc);
>
> - if (gpio_is_valid(slot->detect_pin)) {
> - int pin = slot->detect_pin;
> -
> - free_irq(gpio_to_irq(pin), slot);
> + if (slot->detect_pin) {
> + free_irq(gpiod_to_irq(slot->detect_pin), slot);
> del_timer_sync(&slot->detect_timer);
> }
>
> diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
> index 1491af38cc6e..017e7d8f6126 100644
> --- a/include/linux/atmel-mci.h
> +++ b/include/linux/atmel-mci.h
> @@ -26,8 +26,8 @@
> */
> struct mci_slot_pdata {
> unsigned int bus_width;
> - int detect_pin;
> - int wp_pin;
> + struct gpio_desc *detect_pin;
> + struct gpio_desc *wp_pin;
> bool detect_is_active_high;
> bool non_removable;
> };
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 1/2] mmc: atmel-mci: Convert to gpio descriptors
@ 2022-11-18 9:20 ` Ulf Hansson
0 siblings, 0 replies; 8+ messages in thread
From: Ulf Hansson @ 2022-11-18 9:20 UTC (permalink / raw)
To: Balamanikandan Gunasundar
Cc: alexandre.belloni, linus.walleij, Dmitry Torokhov, linux-mmc,
linux-kernel, ludovic.desroches, hari.prasathge,
linux-arm-kernel
- trimmed cc-list, + Dmitry
On Thu, 17 Nov 2022 at 05:15, Balamanikandan Gunasundar
<balamanikandan.gunasundar@microchip.com> wrote:
>
> Replace the legacy GPIO APIs with gpio descriptor consumer interface.
>
> To maintain backward compatibility, we rely on the "cd-inverted"
> property to manage the invertion flag instead of GPIO property.
>
> Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Looks like you didn't make the conversion from
devm_gpiod_get_from_of_node() into devm_fwnode_gpiod_get(), that
Dmitry suggested [1]. Please re-spin and add Dmitry to the cc-list
next time, to allow him to complete the review.
Kind regards
Uffe
[1]
https://lore.kernel.org/all/Y21+L01BcPQ35FYi@google.com/
> ---
> drivers/mmc/host/atmel-mci.c | 80 ++++++++++++++++++------------------
> include/linux/atmel-mci.h | 4 +-
> 2 files changed, 41 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index 67b2cd166e56..f6194aab17df 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -11,7 +11,6 @@
> #include <linux/dmaengine.h>
> #include <linux/dma-mapping.h>
> #include <linux/err.h>
> -#include <linux/gpio.h>
> #include <linux/init.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> @@ -19,7 +18,8 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> -#include <linux/of_gpio.h>
> +#include <linux/irq.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/platform_device.h>
> #include <linux/scatterlist.h>
> #include <linux/seq_file.h>
> @@ -389,8 +389,8 @@ struct atmel_mci_slot {
> #define ATMCI_CARD_NEED_INIT 1
> #define ATMCI_SHUTDOWN 2
>
> - int detect_pin;
> - int wp_pin;
> + struct gpio_desc *detect_pin;
> + struct gpio_desc *wp_pin;
> bool detect_is_active_high;
>
> struct timer_list detect_timer;
> @@ -638,7 +638,11 @@ atmci_of_init(struct platform_device *pdev)
> pdata->slot[slot_id].bus_width = 1;
>
> pdata->slot[slot_id].detect_pin =
> - of_get_named_gpio(cnp, "cd-gpios", 0);
> + devm_gpiod_get_from_of_node(&pdev->dev, cnp,
> + "cd-gpios",
> + 0, GPIOD_IN, "cd-gpios");
> + if (IS_ERR(pdata->slot[slot_id].detect_pin))
> + pdata->slot[slot_id].detect_pin = NULL;
>
> pdata->slot[slot_id].detect_is_active_high =
> of_property_read_bool(cnp, "cd-inverted");
> @@ -647,7 +651,11 @@ atmci_of_init(struct platform_device *pdev)
> of_property_read_bool(cnp, "non-removable");
>
> pdata->slot[slot_id].wp_pin =
> - of_get_named_gpio(cnp, "wp-gpios", 0);
> + devm_gpiod_get_from_of_node(&pdev->dev, cnp,
> + "wp-gpios",
> + 0, GPIOD_IN, "wp-gpios");
> + if (IS_ERR(pdata->slot[slot_id].wp_pin))
> + pdata->slot[slot_id].wp_pin = NULL;
> }
>
> return pdata;
> @@ -1511,8 +1519,8 @@ static int atmci_get_ro(struct mmc_host *mmc)
> int read_only = -ENOSYS;
> struct atmel_mci_slot *slot = mmc_priv(mmc);
>
> - if (gpio_is_valid(slot->wp_pin)) {
> - read_only = gpio_get_value(slot->wp_pin);
> + if (slot->wp_pin) {
> + read_only = gpiod_get_value(slot->wp_pin);
> dev_dbg(&mmc->class_dev, "card is %s\n",
> read_only ? "read-only" : "read-write");
> }
> @@ -1525,8 +1533,8 @@ static int atmci_get_cd(struct mmc_host *mmc)
> int present = -ENOSYS;
> struct atmel_mci_slot *slot = mmc_priv(mmc);
>
> - if (gpio_is_valid(slot->detect_pin)) {
> - present = !(gpio_get_value(slot->detect_pin) ^
> + if (slot->detect_pin) {
> + present = !(gpiod_get_raw_value(slot->detect_pin) ^
> slot->detect_is_active_high);
> dev_dbg(&mmc->class_dev, "card is %spresent\n",
> present ? "" : "not ");
> @@ -1639,8 +1647,8 @@ static void atmci_detect_change(struct timer_list *t)
> if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
> return;
>
> - enable_irq(gpio_to_irq(slot->detect_pin));
> - present = !(gpio_get_value(slot->detect_pin) ^
> + enable_irq(gpiod_to_irq(slot->detect_pin));
> + present = !(gpiod_get_raw_value(slot->detect_pin) ^
> slot->detect_is_active_high);
> present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
>
> @@ -2241,9 +2249,9 @@ static int atmci_init_slot(struct atmel_mci *host,
> dev_dbg(&mmc->class_dev,
> "slot[%u]: bus_width=%u, detect_pin=%d, "
> "detect_is_active_high=%s, wp_pin=%d\n",
> - id, slot_data->bus_width, slot_data->detect_pin,
> + id, slot_data->bus_width, desc_to_gpio(slot_data->detect_pin),
> slot_data->detect_is_active_high ? "true" : "false",
> - slot_data->wp_pin);
> + desc_to_gpio(slot_data->wp_pin));
>
> mmc->ops = &atmci_ops;
> mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
> @@ -2279,51 +2287,43 @@ static int atmci_init_slot(struct atmel_mci *host,
>
> /* Assume card is present initially */
> set_bit(ATMCI_CARD_PRESENT, &slot->flags);
> - if (gpio_is_valid(slot->detect_pin)) {
> - if (devm_gpio_request(&host->pdev->dev, slot->detect_pin,
> - "mmc_detect")) {
> - dev_dbg(&mmc->class_dev, "no detect pin available\n");
> - slot->detect_pin = -EBUSY;
> - } else if (gpio_get_value(slot->detect_pin) ^
> - slot->detect_is_active_high) {
> + if (slot->detect_pin) {
> + if (gpiod_get_raw_value(slot->detect_pin) ^
> + slot->detect_is_active_high) {
> clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
> }
> + } else {
> + dev_dbg(&mmc->class_dev, "no detect pin available\n");
> }
>
> - if (!gpio_is_valid(slot->detect_pin)) {
> + if (!slot->detect_pin) {
> if (slot_data->non_removable)
> mmc->caps |= MMC_CAP_NONREMOVABLE;
> else
> mmc->caps |= MMC_CAP_NEEDS_POLL;
> }
>
> - if (gpio_is_valid(slot->wp_pin)) {
> - if (devm_gpio_request(&host->pdev->dev, slot->wp_pin,
> - "mmc_wp")) {
> - dev_dbg(&mmc->class_dev, "no WP pin available\n");
> - slot->wp_pin = -EBUSY;
> - }
> - }
> + if (!slot->wp_pin)
> + dev_dbg(&mmc->class_dev, "no WP pin available\n");
>
> host->slot[id] = slot;
> mmc_regulator_get_supply(mmc);
> - mmc_pwrseq_alloc(slot->mmc);
> mmc_add_host(mmc);
>
> - if (gpio_is_valid(slot->detect_pin)) {
> + if (slot->detect_pin) {
> int ret;
>
> timer_setup(&slot->detect_timer, atmci_detect_change, 0);
>
> - ret = request_irq(gpio_to_irq(slot->detect_pin),
> - atmci_detect_interrupt,
> - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> - "mmc-detect", slot);
> + ret = request_irq(gpiod_to_irq(slot->detect_pin),
> + atmci_detect_interrupt,
> + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> + "mmc-detect", slot);
> if (ret) {
> dev_dbg(&mmc->class_dev,
> "could not request IRQ %d for detect pin\n",
> - gpio_to_irq(slot->detect_pin));
> - slot->detect_pin = -EBUSY;
> + gpiod_to_irq(slot->detect_pin));
> + slot->detect_pin = NULL;
> }
> }
>
> @@ -2342,10 +2342,8 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
>
> mmc_remove_host(slot->mmc);
>
> - if (gpio_is_valid(slot->detect_pin)) {
> - int pin = slot->detect_pin;
> -
> - free_irq(gpio_to_irq(pin), slot);
> + if (slot->detect_pin) {
> + free_irq(gpiod_to_irq(slot->detect_pin), slot);
> del_timer_sync(&slot->detect_timer);
> }
>
> diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
> index 1491af38cc6e..017e7d8f6126 100644
> --- a/include/linux/atmel-mci.h
> +++ b/include/linux/atmel-mci.h
> @@ -26,8 +26,8 @@
> */
> struct mci_slot_pdata {
> unsigned int bus_width;
> - int detect_pin;
> - int wp_pin;
> + struct gpio_desc *detect_pin;
> + struct gpio_desc *wp_pin;
> bool detect_is_active_high;
> bool non_removable;
> };
> --
> 2.25.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-11-18 9:22 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-17 4:14 [PATCH v2 0/2] mmc: atmel-mci: Convert to gpio descriptors Balamanikandan Gunasundar
2022-11-17 4:14 ` Balamanikandan Gunasundar
2022-11-17 4:14 ` [PATCH v2 1/2] " Balamanikandan Gunasundar
2022-11-17 4:14 ` Balamanikandan Gunasundar
2022-11-18 9:20 ` Ulf Hansson
2022-11-18 9:20 ` Ulf Hansson
2022-11-17 4:14 ` [PATCH v2 2/2] mmc: atmel-mci: move atmel MCI header file Balamanikandan Gunasundar
2022-11-17 4:14 ` Balamanikandan Gunasundar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.