From: Christoph Niedermaier <cniedermaier@dh-electronics.com> To: <linux-arm-kernel@lists.infradead.org> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>, "Support Opensource" <support.opensource@diasemi.com>, Adam Thomson <Adam.Thomson.Opensource@diasemi.com>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Marek Vasut <marex@denx.de>, <kernel@dh-electronics.com>, <linux-kernel@vger.kernel.org> Subject: [PATCH 0/3] mfd: da9062: Make the use of IRQ optional Date: Tue, 22 Nov 2022 10:58:30 +0100 [thread overview] Message-ID: <20221122095833.3957-1-cniedermaier@dh-electronics.com> (raw) For the core functionality of the MFD DA9061/62 IRQ isn't needed. This series removes the requirement for an IRQ. This is done by modifing the MFD driver and regulator driver to setup the device without IRQ. This makes the DA9061/62 chip useable for designs which haven't connected the IRQ pin. I tested it with a DHCOM i.MX6ULL, which is powered by a DA9061. In this series, the DT binding file is also adapted. Christoph Niedermaier (3): dt-bindings: mfd: da9062: Move IRQ to optional properties mfd: da9062: Remove IRQ requirement regulator: da9062: Make the use of IRQ optional --- Cc: Support Opensource <support.opensource@diasemi.com> Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Marek Vasut <marex@denx.de> Cc: kernel@dh-electronics.com Cc: linux-kernel@vger.kernel.org To: linux-arm-kernel@lists.infradead.org --- Documentation/devicetree/bindings/mfd/da9062.txt | 11 +-- drivers/mfd/da9062-core.c | 98 ++++++++++++++++++------ drivers/regulator/da9062-regulator.c | 7 +- 3 files changed, 82 insertions(+), 34 deletions(-) -- 2.11.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Christoph Niedermaier <cniedermaier@dh-electronics.com> To: <linux-arm-kernel@lists.infradead.org> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>, "Support Opensource" <support.opensource@diasemi.com>, Adam Thomson <Adam.Thomson.Opensource@diasemi.com>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Marek Vasut <marex@denx.de>, <kernel@dh-electronics.com>, <linux-kernel@vger.kernel.org> Subject: [PATCH 0/3] mfd: da9062: Make the use of IRQ optional Date: Tue, 22 Nov 2022 10:58:30 +0100 [thread overview] Message-ID: <20221122095833.3957-1-cniedermaier@dh-electronics.com> (raw) For the core functionality of the MFD DA9061/62 IRQ isn't needed. This series removes the requirement for an IRQ. This is done by modifing the MFD driver and regulator driver to setup the device without IRQ. This makes the DA9061/62 chip useable for designs which haven't connected the IRQ pin. I tested it with a DHCOM i.MX6ULL, which is powered by a DA9061. In this series, the DT binding file is also adapted. Christoph Niedermaier (3): dt-bindings: mfd: da9062: Move IRQ to optional properties mfd: da9062: Remove IRQ requirement regulator: da9062: Make the use of IRQ optional --- Cc: Support Opensource <support.opensource@diasemi.com> Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Marek Vasut <marex@denx.de> Cc: kernel@dh-electronics.com Cc: linux-kernel@vger.kernel.org To: linux-arm-kernel@lists.infradead.org --- Documentation/devicetree/bindings/mfd/da9062.txt | 11 +-- drivers/mfd/da9062-core.c | 98 ++++++++++++++++++------ drivers/regulator/da9062-regulator.c | 7 +- 3 files changed, 82 insertions(+), 34 deletions(-) -- 2.11.0
next reply other threads:[~2022-11-22 10:02 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-22 9:58 Christoph Niedermaier [this message] 2022-11-22 9:58 ` [PATCH 0/3] mfd: da9062: Make the use of IRQ optional Christoph Niedermaier 2022-11-22 9:58 ` [PATCH 1/3] dt-bindings: mfd: da9062: Move IRQ to optional properties Christoph Niedermaier 2022-11-22 9:58 ` Christoph Niedermaier 2022-11-22 10:18 ` Krzysztof Kozlowski 2022-11-22 10:18 ` Krzysztof Kozlowski 2022-12-08 13:14 ` Lee Jones 2022-12-08 13:14 ` Lee Jones 2022-11-22 9:58 ` [PATCH 2/3] mfd: da9062: Remove IRQ requirement Christoph Niedermaier 2022-11-22 9:58 ` Christoph Niedermaier 2022-11-22 9:58 ` [PATCH 3/3] regulator: da9062: Make the use of IRQ optional Christoph Niedermaier 2022-11-22 9:58 ` Christoph Niedermaier 2022-11-22 12:10 ` Mark Brown 2022-11-22 12:10 ` Mark Brown 2022-11-23 11:09 ` DLG Adam Ward 2022-11-23 11:09 ` DLG Adam Ward
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221122095833.3957-1-cniedermaier@dh-electronics.com \ --to=cniedermaier@dh-electronics.com \ --cc=Adam.Thomson.Opensource@diasemi.com \ --cc=broonie@kernel.org \ --cc=kernel@dh-electronics.com \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=marex@denx.de \ --cc=support.opensource@diasemi.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.