From: Przemek Kitszel <przemyslaw.kitszel@intel.com> To: intel-wired-lan@osuosl.org Cc: netdev@vger.kernel.org, Tony Nguyen <anthony.l.nguyen@intel.com>, Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>, Przemek Kitszel <przemyslaw.kitszel@intel.com> Subject: [PATCH net-next 1/2] ice: Add support for 100G KR2/CR2/SR2 link reporting Date: Wed, 23 Nov 2022 16:55:43 +0100 [thread overview] Message-ID: <20221123155544.1660952-1-przemyslaw.kitszel@intel.com> (raw) From: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Commit 2736d94f351b ("ethtool: Added support for 50Gbps per lane link modes") in v5.1 added (among other things) support for 100G CR2/KR2/SR2 link modes. Advertise these link modes if the firmware reports the corresponding PHY types. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> --- drivers/net/ethernet/intel/ice/ice_ethtool.c | 42 +++++++++++++++----- 1 file changed, 33 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c index ba4ccc5f7d60..417efc401001 100644 --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c @@ -1950,8 +1950,7 @@ ice_phy_type_to_ethtool(struct net_device *netdev, ICE_PHY_TYPE_LOW_100G_CAUI4 | ICE_PHY_TYPE_LOW_100G_AUI4_AOC_ACC | ICE_PHY_TYPE_LOW_100G_AUI4 | - ICE_PHY_TYPE_LOW_100GBASE_CR_PAM4 | - ICE_PHY_TYPE_LOW_100GBASE_CP2; + ICE_PHY_TYPE_LOW_100GBASE_CR_PAM4; phy_type_mask_hi = ICE_PHY_TYPE_HIGH_100G_CAUI2_AOC_ACC | ICE_PHY_TYPE_HIGH_100G_CAUI2 | ICE_PHY_TYPE_HIGH_100G_AUI2_AOC_ACC | @@ -1964,15 +1963,28 @@ ice_phy_type_to_ethtool(struct net_device *netdev, 100000baseCR4_Full); } - phy_type_mask_lo = ICE_PHY_TYPE_LOW_100GBASE_SR4 | - ICE_PHY_TYPE_LOW_100GBASE_SR2; - if (phy_types_low & phy_type_mask_lo) { + if (phy_types_low & ICE_PHY_TYPE_LOW_100GBASE_CP2) { + ethtool_link_ksettings_add_link_mode(ks, supported, + 100000baseCR2_Full); + ice_ethtool_advertise_link_mode(ICE_AQ_LINK_SPEED_100GB, + 100000baseCR2_Full); + } + + if (phy_types_low & ICE_PHY_TYPE_LOW_100GBASE_SR4) { ethtool_link_ksettings_add_link_mode(ks, supported, 100000baseSR4_Full); ice_ethtool_advertise_link_mode(ICE_AQ_LINK_SPEED_100GB, 100000baseSR4_Full); } + if (phy_types_low & ICE_PHY_TYPE_LOW_100GBASE_SR2) { + ethtool_link_ksettings_add_link_mode(ks, supported, + 100000baseSR2_Full); + ice_ethtool_advertise_link_mode(ICE_AQ_LINK_SPEED_100GB, + 100000baseSR2_Full); + + } + phy_type_mask_lo = ICE_PHY_TYPE_LOW_100GBASE_LR4 | ICE_PHY_TYPE_LOW_100GBASE_DR; if (phy_types_low & phy_type_mask_lo) { @@ -1984,14 +1996,20 @@ ice_phy_type_to_ethtool(struct net_device *netdev, phy_type_mask_lo = ICE_PHY_TYPE_LOW_100GBASE_KR4 | ICE_PHY_TYPE_LOW_100GBASE_KR_PAM4; - phy_type_mask_hi = ICE_PHY_TYPE_HIGH_100GBASE_KR2_PAM4; - if (phy_types_low & phy_type_mask_lo || - phy_types_high & phy_type_mask_hi) { + if (phy_types_low & phy_type_mask_lo) { ethtool_link_ksettings_add_link_mode(ks, supported, 100000baseKR4_Full); ice_ethtool_advertise_link_mode(ICE_AQ_LINK_SPEED_100GB, 100000baseKR4_Full); } + + if (phy_types_high & ICE_PHY_TYPE_HIGH_100GBASE_KR2_PAM4) { + ethtool_link_ksettings_add_link_mode(ks, supported, + 100000baseKR2_Full); + ice_ethtool_advertise_link_mode(ICE_AQ_LINK_SPEED_100GB, + 100000baseKR2_Full); + } + } #define TEST_SET_BITS_TIMEOUT 50 @@ -2299,7 +2317,13 @@ ice_ksettings_find_adv_link_speed(const struct ethtool_link_ksettings *ks) ethtool_link_ksettings_test_link_mode(ks, advertising, 100000baseLR4_ER4_Full) || ethtool_link_ksettings_test_link_mode(ks, advertising, - 100000baseKR4_Full)) + 100000baseKR4_Full) || + ethtool_link_ksettings_test_link_mode(ks, advertising, + 100000baseCR2_Full) || + ethtool_link_ksettings_test_link_mode(ks, advertising, + 100000baseSR2_Full) || + ethtool_link_ksettings_test_link_mode(ks, advertising, + 100000baseKR2_Full)) adv_link_speed |= ICE_AQ_LINK_SPEED_100GB; return adv_link_speed; -- 2.34.3
WARNING: multiple messages have this Message-ID (diff)
From: Przemek Kitszel <przemyslaw.kitszel@intel.com> To: intel-wired-lan@osuosl.org Cc: netdev@vger.kernel.org, Przemek Kitszel <przemyslaw.kitszel@intel.com> Subject: [Intel-wired-lan] [PATCH net-next 1/2] ice: Add support for 100G KR2/CR2/SR2 link reporting Date: Wed, 23 Nov 2022 16:55:43 +0100 [thread overview] Message-ID: <20221123155544.1660952-1-przemyslaw.kitszel@intel.com> (raw) From: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Commit 2736d94f351b ("ethtool: Added support for 50Gbps per lane link modes") in v5.1 added (among other things) support for 100G CR2/KR2/SR2 link modes. Advertise these link modes if the firmware reports the corresponding PHY types. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> --- drivers/net/ethernet/intel/ice/ice_ethtool.c | 42 +++++++++++++++----- 1 file changed, 33 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c index ba4ccc5f7d60..417efc401001 100644 --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c @@ -1950,8 +1950,7 @@ ice_phy_type_to_ethtool(struct net_device *netdev, ICE_PHY_TYPE_LOW_100G_CAUI4 | ICE_PHY_TYPE_LOW_100G_AUI4_AOC_ACC | ICE_PHY_TYPE_LOW_100G_AUI4 | - ICE_PHY_TYPE_LOW_100GBASE_CR_PAM4 | - ICE_PHY_TYPE_LOW_100GBASE_CP2; + ICE_PHY_TYPE_LOW_100GBASE_CR_PAM4; phy_type_mask_hi = ICE_PHY_TYPE_HIGH_100G_CAUI2_AOC_ACC | ICE_PHY_TYPE_HIGH_100G_CAUI2 | ICE_PHY_TYPE_HIGH_100G_AUI2_AOC_ACC | @@ -1964,15 +1963,28 @@ ice_phy_type_to_ethtool(struct net_device *netdev, 100000baseCR4_Full); } - phy_type_mask_lo = ICE_PHY_TYPE_LOW_100GBASE_SR4 | - ICE_PHY_TYPE_LOW_100GBASE_SR2; - if (phy_types_low & phy_type_mask_lo) { + if (phy_types_low & ICE_PHY_TYPE_LOW_100GBASE_CP2) { + ethtool_link_ksettings_add_link_mode(ks, supported, + 100000baseCR2_Full); + ice_ethtool_advertise_link_mode(ICE_AQ_LINK_SPEED_100GB, + 100000baseCR2_Full); + } + + if (phy_types_low & ICE_PHY_TYPE_LOW_100GBASE_SR4) { ethtool_link_ksettings_add_link_mode(ks, supported, 100000baseSR4_Full); ice_ethtool_advertise_link_mode(ICE_AQ_LINK_SPEED_100GB, 100000baseSR4_Full); } + if (phy_types_low & ICE_PHY_TYPE_LOW_100GBASE_SR2) { + ethtool_link_ksettings_add_link_mode(ks, supported, + 100000baseSR2_Full); + ice_ethtool_advertise_link_mode(ICE_AQ_LINK_SPEED_100GB, + 100000baseSR2_Full); + + } + phy_type_mask_lo = ICE_PHY_TYPE_LOW_100GBASE_LR4 | ICE_PHY_TYPE_LOW_100GBASE_DR; if (phy_types_low & phy_type_mask_lo) { @@ -1984,14 +1996,20 @@ ice_phy_type_to_ethtool(struct net_device *netdev, phy_type_mask_lo = ICE_PHY_TYPE_LOW_100GBASE_KR4 | ICE_PHY_TYPE_LOW_100GBASE_KR_PAM4; - phy_type_mask_hi = ICE_PHY_TYPE_HIGH_100GBASE_KR2_PAM4; - if (phy_types_low & phy_type_mask_lo || - phy_types_high & phy_type_mask_hi) { + if (phy_types_low & phy_type_mask_lo) { ethtool_link_ksettings_add_link_mode(ks, supported, 100000baseKR4_Full); ice_ethtool_advertise_link_mode(ICE_AQ_LINK_SPEED_100GB, 100000baseKR4_Full); } + + if (phy_types_high & ICE_PHY_TYPE_HIGH_100GBASE_KR2_PAM4) { + ethtool_link_ksettings_add_link_mode(ks, supported, + 100000baseKR2_Full); + ice_ethtool_advertise_link_mode(ICE_AQ_LINK_SPEED_100GB, + 100000baseKR2_Full); + } + } #define TEST_SET_BITS_TIMEOUT 50 @@ -2299,7 +2317,13 @@ ice_ksettings_find_adv_link_speed(const struct ethtool_link_ksettings *ks) ethtool_link_ksettings_test_link_mode(ks, advertising, 100000baseLR4_ER4_Full) || ethtool_link_ksettings_test_link_mode(ks, advertising, - 100000baseKR4_Full)) + 100000baseKR4_Full) || + ethtool_link_ksettings_test_link_mode(ks, advertising, + 100000baseCR2_Full) || + ethtool_link_ksettings_test_link_mode(ks, advertising, + 100000baseSR2_Full) || + ethtool_link_ksettings_test_link_mode(ks, advertising, + 100000baseKR2_Full)) adv_link_speed |= ICE_AQ_LINK_SPEED_100GB; return adv_link_speed; -- 2.34.3 _______________________________________________ Intel-wired-lan mailing list Intel-wired-lan@osuosl.org https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
next reply other threads:[~2022-11-23 16:05 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-23 15:55 Przemek Kitszel [this message] 2022-11-23 15:55 ` [Intel-wired-lan] [PATCH net-next 1/2] ice: Add support for 100G KR2/CR2/SR2 link reporting Przemek Kitszel 2022-11-23 15:55 ` [PATCH net-next 2/2] ice: combine cases in ice_ksettings_find_adv_link_speed() Przemek Kitszel 2022-11-23 15:55 ` [Intel-wired-lan] " Przemek Kitszel 2022-11-23 20:21 ` Anirudh Venkataramanan 2022-11-23 20:21 ` Anirudh Venkataramanan 2022-12-23 1:16 ` [Intel-wired-lan] " Mekala, SunithaX D 2022-12-23 1:16 ` Mekala, SunithaX D 2022-12-23 1:16 ` [Intel-wired-lan] [PATCH net-next 1/2] ice: Add support for 100G KR2/CR2/SR2 link reporting Mekala, SunithaX D 2022-12-23 1:16 ` Mekala, SunithaX D
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221123155544.1660952-1-przemyslaw.kitszel@intel.com \ --to=przemyslaw.kitszel@intel.com \ --cc=anirudh.venkataramanan@intel.com \ --cc=anthony.l.nguyen@intel.com \ --cc=intel-wired-lan@osuosl.org \ --cc=netdev@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.