* [PATCH RESEND 0/1] can: esd_usb: Some preparation for supporting esd CAN-USB/3
@ 2022-11-24 20:38 Frank Jungclaus
2022-11-24 20:38 ` [PATCH RESEND 1/1] can: esd_usb: Allow REC and TEC to return to zero Frank Jungclaus
0 siblings, 1 reply; 5+ messages in thread
From: Frank Jungclaus @ 2022-11-24 20:38 UTC (permalink / raw)
To: linux-can, Marc Kleine-Budde, Wolfgang Grandegger, Vincent Mailhol
Cc: Stefan Mätje, netdev, linux-kernel, Frank Jungclaus
Being sucked into another higher prioritized project in the mid of
July, my work on preparations for adding support of the newly available
esd CAN-USB/3 to esd_usb.c came to a halt. Let's start again ...
Here is a attempt to resend a slightly overhauled and split
into two pieces version of my patch series from Fri, 8 Jul 2022.
Link to the patch series in July 2022:
https://lore.kernel.org/all/20220708181235.4104943-1-frank.jungclaus@esd.eu/
Frank Jungclaus (1):
can: esd_usb: Allow REC and TEC to return to zero
drivers/net/can/usb/esd_usb.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
base-commit: 3755b56a9b8ff8f1a6a21a979cc215c220401278
--
2.25.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH RESEND 1/1] can: esd_usb: Allow REC and TEC to return to zero
2022-11-24 20:38 [PATCH RESEND 0/1] can: esd_usb: Some preparation for supporting esd CAN-USB/3 Frank Jungclaus
@ 2022-11-24 20:38 ` Frank Jungclaus
2022-11-25 15:56 ` Marc Kleine-Budde
0 siblings, 1 reply; 5+ messages in thread
From: Frank Jungclaus @ 2022-11-24 20:38 UTC (permalink / raw)
To: linux-can, Marc Kleine-Budde, Wolfgang Grandegger, Vincent Mailhol
Cc: Stefan Mätje, netdev, linux-kernel, Frank Jungclaus
We don't get any further EVENT from an esd CAN USB device for changes
on REC or TEC while those counters converge to 0 (with ecc == 0).
So when handling the "Back to Error Active"-event force
txerr = rxerr = 0, otherwise the berr-counters might stay on
values like 95 forever ...
Also, to make life easier during the ongoing development a
netdev_dbg() has been introduced to allow dumping error events send by
an esd CAN USB device.
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
---
drivers/net/can/usb/esd_usb.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
index 1bcfad11b1e4..da24c649aadd 100644
--- a/drivers/net/can/usb/esd_usb.c
+++ b/drivers/net/can/usb/esd_usb.c
@@ -230,10 +230,14 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
if (id == ESD_EV_CAN_ERROR_EXT) {
u8 state = msg->msg.rx.data[0];
- u8 ecc = msg->msg.rx.data[1];
+ u8 ecc = msg->msg.rx.data[1];
u8 rxerr = msg->msg.rx.data[2];
u8 txerr = msg->msg.rx.data[3];
+ netdev_dbg(priv->netdev,
+ "CAN_ERR_EV_EXT: dlc=%#02x state=%02x ecc=%02x rec=%02x tec=%02x\n",
+ msg->msg.rx.dlc, state, ecc, rxerr, txerr);
+
skb = alloc_can_err_skb(priv->netdev, &cf);
if (skb == NULL) {
stats->rx_dropped++;
@@ -260,6 +264,8 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
break;
default:
priv->can.state = CAN_STATE_ERROR_ACTIVE;
+ txerr = 0;
+ rxerr = 0;
break;
}
} else {
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH RESEND 1/1] can: esd_usb: Allow REC and TEC to return to zero
2022-11-24 20:38 ` [PATCH RESEND 1/1] can: esd_usb: Allow REC and TEC to return to zero Frank Jungclaus
@ 2022-11-25 15:56 ` Marc Kleine-Budde
2022-11-29 17:15 ` Frank Jungclaus
0 siblings, 1 reply; 5+ messages in thread
From: Marc Kleine-Budde @ 2022-11-25 15:56 UTC (permalink / raw)
To: Frank Jungclaus
Cc: linux-can, Wolfgang Grandegger, Vincent Mailhol,
Stefan Mätje, netdev, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2164 bytes --]
On 24.11.2022 21:38:06, Frank Jungclaus wrote:
> We don't get any further EVENT from an esd CAN USB device for changes
> on REC or TEC while those counters converge to 0 (with ecc == 0).
> So when handling the "Back to Error Active"-event force
> txerr = rxerr = 0, otherwise the berr-counters might stay on
> values like 95 forever ...
>
> Also, to make life easier during the ongoing development a
> netdev_dbg() has been introduced to allow dumping error events send by
> an esd CAN USB device.
>
> Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Please add a Fixes tag.
https://elixir.bootlin.com/linux/v6.0/source/Documentation/process/handling-regressions.rst#L107
> ---
> drivers/net/can/usb/esd_usb.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
> index 1bcfad11b1e4..da24c649aadd 100644
> --- a/drivers/net/can/usb/esd_usb.c
> +++ b/drivers/net/can/usb/esd_usb.c
> @@ -230,10 +230,14 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
>
> if (id == ESD_EV_CAN_ERROR_EXT) {
> u8 state = msg->msg.rx.data[0];
> - u8 ecc = msg->msg.rx.data[1];
> + u8 ecc = msg->msg.rx.data[1];
unrelated, please remove.
> u8 rxerr = msg->msg.rx.data[2];
> u8 txerr = msg->msg.rx.data[3];
>
> + netdev_dbg(priv->netdev,
> + "CAN_ERR_EV_EXT: dlc=%#02x state=%02x ecc=%02x rec=%02x tec=%02x\n",
> + msg->msg.rx.dlc, state, ecc, rxerr, txerr);
> +
> skb = alloc_can_err_skb(priv->netdev, &cf);
> if (skb == NULL) {
> stats->rx_dropped++;
> @@ -260,6 +264,8 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
> break;
> default:
> priv->can.state = CAN_STATE_ERROR_ACTIVE;
> + txerr = 0;
> + rxerr = 0;
> break;
> }
> } else {
regards,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH RESEND 1/1] can: esd_usb: Allow REC and TEC to return to zero
2022-11-25 15:56 ` Marc Kleine-Budde
@ 2022-11-29 17:15 ` Frank Jungclaus
2022-11-30 10:21 ` Marc Kleine-Budde
0 siblings, 1 reply; 5+ messages in thread
From: Frank Jungclaus @ 2022-11-29 17:15 UTC (permalink / raw)
To: mkl
Cc: Stefan Mätje, linux-can, wg, netdev, linux-kernel, mailhol.vincent
Hello Marc,
thanks for commenting.
On Fri, 2022-11-25 at 16:56 +0100, Marc Kleine-Budde wrote:
> On 24.11.2022 21:38:06, Frank Jungclaus wrote:
> > We don't get any further EVENT from an esd CAN USB device for changes
> > on REC or TEC while those counters converge to 0 (with ecc == 0).
> > So when handling the "Back to Error Active"-event force
> > txerr = rxerr = 0, otherwise the berr-counters might stay on
> > values like 95 forever ...
> >
> > Also, to make life easier during the ongoing development a
> > netdev_dbg() has been introduced to allow dumping error events send by
> > an esd CAN USB device.
> >
> > Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
>
> Please add a Fixes tag.
>
> https://elixir.bootlin.com/linux/v6.0/source/Documentation/process/handling-regressions.rst#L107
>
From my point of view this is not a regression, it's a sort of
imperfection existing since the initial add of esd_usb(2).c to the
kernel. So should I add a "Fixes:" referring to the initial commit?
(Currently) I'm slow on the uptake ;)
> > ---
> > drivers/net/can/usb/esd_usb.c | 8 +++++++-
> > 1 file changed, 7 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
> > index 1bcfad11b1e4..da24c649aadd 100644
> > --- a/drivers/net/can/usb/esd_usb.c
> > +++ b/drivers/net/can/usb/esd_usb.c
> > @@ -230,10 +230,14 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
> >
> > if (id == ESD_EV_CAN_ERROR_EXT) {
> > u8 state = msg->msg.rx.data[0];
> > - u8 ecc = msg->msg.rx.data[1];
> > + u8 ecc = msg->msg.rx.data[1];
>
> unrelated, please remove.
>
You're right, sorry, will be removed in v2 ...
> > u8 rxerr = msg->msg.rx.data[2];
> > u8 txerr = msg->msg.rx.data[3];
> >
> > + netdev_dbg(priv->netdev,
> > + "CAN_ERR_EV_EXT: dlc=%#02x state=%02x ecc=%02x rec=%02x tec=%02x\n",
> > + msg->msg.rx.dlc, state, ecc, rxerr, txerr);
> > +
> > skb = alloc_can_err_skb(priv->netdev, &cf);
> > if (skb == NULL) {
> > stats->rx_dropped++;
> > @@ -260,6 +264,8 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
> > break;
> > default:
> > priv->can.state = CAN_STATE_ERROR_ACTIVE;
> > + txerr = 0;
> > + rxerr = 0;
> > break;
> > }
> > } else {
>
> regards,
> Marc
>
Regards, Frank
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH RESEND 1/1] can: esd_usb: Allow REC and TEC to return to zero
2022-11-29 17:15 ` Frank Jungclaus
@ 2022-11-30 10:21 ` Marc Kleine-Budde
0 siblings, 0 replies; 5+ messages in thread
From: Marc Kleine-Budde @ 2022-11-30 10:21 UTC (permalink / raw)
To: Frank Jungclaus
Cc: Stefan Mätje, linux-can, wg, netdev, linux-kernel, mailhol.vincent
[-- Attachment #1: Type: text/plain, Size: 1525 bytes --]
On 29.11.2022 17:15:56, Frank Jungclaus wrote:
> Hello Marc,
> thanks for commenting.
>
> On Fri, 2022-11-25 at 16:56 +0100, Marc Kleine-Budde wrote:
> > On 24.11.2022 21:38:06, Frank Jungclaus wrote:
> > > We don't get any further EVENT from an esd CAN USB device for changes
> > > on REC or TEC while those counters converge to 0 (with ecc == 0).
> > > So when handling the "Back to Error Active"-event force
> > > txerr = rxerr = 0, otherwise the berr-counters might stay on
> > > values like 95 forever ...
> > >
> > > Also, to make life easier during the ongoing development a
> > > netdev_dbg() has been introduced to allow dumping error events send by
> > > an esd CAN USB device.
> > >
> > > Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
> >
> > Please add a Fixes tag.
> >
> > https://elixir.bootlin.com/linux/v6.0/source/Documentation/process/handling-regressions.rst#L107
> >
> From my point of view this is not a regression, it's a sort of
> imperfection existing since the initial add of esd_usb(2).c to the
> kernel. So should I add a "Fixes:" referring to the initial commit?
> (Currently) I'm slow on the uptake ;)
Please add a fixes tag that refers to the code that this patch fixes.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-11-30 10:22 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-24 20:38 [PATCH RESEND 0/1] can: esd_usb: Some preparation for supporting esd CAN-USB/3 Frank Jungclaus
2022-11-24 20:38 ` [PATCH RESEND 1/1] can: esd_usb: Allow REC and TEC to return to zero Frank Jungclaus
2022-11-25 15:56 ` Marc Kleine-Budde
2022-11-29 17:15 ` Frank Jungclaus
2022-11-30 10:21 ` Marc Kleine-Budde
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.