All of lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] [git commit branch/next] configs/versal_vck190: new defconfig
@ 2022-11-25 22:11 Thomas Petazzoni via buildroot
  0 siblings, 0 replies; only message in thread
From: Thomas Petazzoni via buildroot @ 2022-11-25 22:11 UTC (permalink / raw)
  To: buildroot

commit: https://git.buildroot.net/buildroot/commit/?id=4060a6d5307d81475f8cc3b572cd6eca9a94ffbf
branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/next

This patch adds support for Xilinx Versal VCK190 evaluation board.

VCK190 features can be found here:
https://www.xilinx.com/products/boards-and-kits/vck190.html

The VCK190 is based on the Xilinx Versal family:
https://www.xilinx.com/products/silicon-devices/acap/versal.html

The VC1902 included with the VCK190 evaluation board has Xilinx
AI Engine acclerators designed for accelerating machine learning
applications.  Also included is an upgrade from prior Zynq and
ZynqMP families to ARM Cortex-A72 cores.

While the Linux kernel for Versal is quite similar to ZynqMP,
the boot process has significantly changed.

Triple-redundant MicroBlaze cores are used to boot and setup
Versal devices.  For this reason, current buildroot support
will download pre-built firmware images and use Xilinx bootgen
to generate the boot.bin for the vck190.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
 DEVELOPERS                      |  2 ++
 board/versal/genimage.cfg       | 30 +++++++++++++++++++++++
 board/versal/post-build.sh      | 16 ++++++++++++
 board/versal/post-image.sh      | 35 ++++++++++++++++++++++++++
 board/versal/readme.txt         | 54 +++++++++++++++++++++++++++++++++++++++++
 configs/versal_vck190_defconfig | 38 +++++++++++++++++++++++++++++
 6 files changed, 175 insertions(+)

diff --git a/DEVELOPERS b/DEVELOPERS
index 61a50b5863..ab9cfe5ee9 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2187,9 +2187,11 @@ F:	package/pkg-qmake.mk
 F:	package/qt5/qt5opcua/
 
 N:	Neal Frager <neal.frager@amd.com>
+F:	board/versal/
 F:	board/zynq/
 F:	board/zynqmp/
 F:	board/zynqmp/kria/
+F:	configs/versal_vck190_defconfig
 F:	configs/zynq_zc706_defconfig
 F:	configs/zynqmp_zcu102_defconfig
 F:	configs/zynqmp_zcu106_defconfig
diff --git a/board/versal/genimage.cfg b/board/versal/genimage.cfg
new file mode 100644
index 0000000000..d994d3a2bf
--- /dev/null
+++ b/board/versal/genimage.cfg
@@ -0,0 +1,30 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"boot.bin",
+			"system.dtb",
+			"Image"
+		}
+		file extlinux/extlinux.conf {
+			image = extlinux.conf
+		}
+	}
+
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
diff --git a/board/versal/post-build.sh b/board/versal/post-build.sh
new file mode 100755
index 0000000000..ff8f8a6071
--- /dev/null
+++ b/board/versal/post-build.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+# genimage will need to find the extlinux.conf
+# in the binaries directory
+
+BOARD_DIR="$(dirname $0)"
+CONSOLE=$2
+ROOT=$3
+
+mkdir -p "${BINARIES_DIR}"
+cat <<-__HEADER_EOF > "${BINARIES_DIR}/extlinux.conf"
+	label linux
+	  kernel /Image
+	  devicetree /system.dtb
+	  append console=${CONSOLE} clk_ignore_unused root=/dev/${ROOT} rw rootwait
+	__HEADER_EOF
diff --git a/board/versal/post-image.sh b/board/versal/post-image.sh
new file mode 100755
index 0000000000..890522c31d
--- /dev/null
+++ b/board/versal/post-image.sh
@@ -0,0 +1,35 @@
+#!/bin/sh
+
+# By default U-Boot loads DTB from a file named "system.dtb", so
+# let's use a symlink with that name that points to the *first*
+# devicetree listed in the config.
+
+FIRST_DT=$(sed -nr \
+               -e 's|^BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/([-_/[:alnum:]\\.]*).*"$|\1|p' \
+               ${BR2_CONFIG})
+
+[ -z "${FIRST_DT}" ] || ln -fs ${FIRST_DT}.dtb ${BINARIES_DIR}/system.dtb
+
+BOARD_DIR="$(dirname $0)"
+BOARD_NAME=$4
+
+mkdir -p "${BINARIES_DIR}"
+cat <<-__HEADER_EOF > "${BINARIES_DIR}/bootgen.bif"
+	the_ROM_image:
+	{
+	  image {
+	    { type=bootimage, file=${BINARIES_DIR}/${BOARD_NAME}_vpl_gen_fixed.pdi }
+	    { type=bootloader, file=${BINARIES_DIR}/${BOARD_NAME}_plm.elf }
+	    { core=psm, file=${BINARIES_DIR}/${BOARD_NAME}_psmfw.elf }
+	  }
+	  image {
+	    id = 0x1c000000, name=apu_subsystem 
+	    { type=raw, load=0x00001000, file=${BINARIES_DIR}/system.dtb }
+	    { core=a72-0, exception_level=el-3, trustzone, file=${BINARIES_DIR}/bl31.elf }
+	    { core=a72-0, exception_level=el-2, file=${BINARIES_DIR}/u-boot.elf }
+	  }
+	}
+	__HEADER_EOF
+
+${HOST_DIR}/bin/bootgen -arch versal -image ${BINARIES_DIR}/bootgen.bif -o ${BINARIES_DIR}/boot.bin -w on
+support/scripts/genimage.sh -c ${BOARD_DIR}/genimage.cfg
diff --git a/board/versal/readme.txt b/board/versal/readme.txt
new file mode 100644
index 0000000000..9f234be620
--- /dev/null
+++ b/board/versal/readme.txt
@@ -0,0 +1,54 @@
+******************************************
+Xilinx VCK190 board - Versal
+******************************************
+
+This document describes the Buildroot support for the VCK190
+board by Xilinx, based on Versal.  It has been tested with the 
+VCK190 production board.
+
+Evaluation board features can be found here with the link below.
+
+VCK190:
+https://www.xilinx.com/products/boards-and-kits/vck190.html
+
+
+How to build it
+===============
+
+Configure Buildroot:
+
+    $ make versal_vck190_defconfig
+
+Compile everything and build the rootfs image:
+
+    $ make
+
+Result of the build
+-------------------
+
+After building, you should get a tree like this:
+
+    output/images/
+    +-- boot.bin
+    +-- boot.vfat
+    +-- Image
+    +-- rootfs.ext2
+    +-- rootfs.ext4 -> rootfs.ext2
+    +-- sdcard.img
+    +-- system.dtb -> versal-vck190-rev1.1.dtb
+    `-- versal-vck190-rev1.1.dtb
+
+How to write the SD card
+========================
+
+WARNING! This will destroy all the card content. Use with care!
+
+The sdcard.img file is a complete bootable image ready to be written
+on the boot medium. To install it, simply copy the image to an SD
+card:
+
+    # dd if=output/images/sdcard.img of=/dev/sdX
+
+Where 'sdX' is the device node of the SD.
+
+Eject the SD card, insert it in the board, and power it up.
diff --git a/configs/versal_vck190_defconfig b/configs/versal_vck190_defconfig
new file mode 100644
index 0000000000..d87df221c6
--- /dev/null
+++ b/configs/versal_vck190_defconfig
@@ -0,0 +1,38 @@
+BR2_aarch64=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/versal/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/versal/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="ttyAMA0,115200 mmcblk0p2 vck190"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.2)/xlnx_rebase_v5.15_LTS_2022.2.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="xilinx_versal"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/versal-vck190-rev1.1"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.6_2022.2)/xlnx_rebase_v2.6_2022.2.tar.gz"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="versal"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.2)/xlnx_rebase_v2022.01_2022.2.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_versal_virt"
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=versal-vck190-rev1.1"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_REMAKE_ELF=y
+BR2_PACKAGE_VERSAL_FIRMWARE=y
+BR2_PACKAGE_VERSAL_FIRMWARE_VERSION="v2022.2"
+BR2_PACKAGE_VERSAL_FIRMWARE_BOARD="vck190"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_BOOTGEN=y
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] only message in thread
only message in thread, other threads:[~2022-11-25 22:16 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-25 22:11 [Buildroot] [git commit branch/next] configs/versal_vck190: new defconfig Thomas Petazzoni via buildroot

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.