* [PULL] IIO: 2nd set of new device support, cleanups and minor fixes for 6.2
@ 2022-11-26 18:47 Jonathan Cameron
2022-11-27 13:43 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2022-11-26 18:47 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit 12491d35551df69709777bd7769e1e33641943cc:
iio: pressure: bmp280: convert to i2c's .probe_new() (2022-11-23 20:01:38 +0000)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.2b
for you to fetch changes up to f84eec02b7248b6ae3bd8ef18a66f6f64eeab971:
iio: addac: ad74413r: fix blank line after declaration warning (2022-11-24 19:24:34 +0000)
----------------------------------------------------------------
2nd set of IIO new device support, cleanups etc for 6.2
Includes a few late breaking fixes for old issues.
Contains a large set of conversions from i2c probe() to probe_new()
as part of an attempt to finally get rid of the old style probe().
New devices support
* adi,ad74115
- New driver for this complex input/output device with 16 bit ADCs,
14 bit DACs amongst other features.
- A few tidy ups / removal of unused data patches followed.
* adi,adf4377
- New driver for this dual output integer-N phased locked loop and VCO
chip.
* maxim,max30208
- New driver for this high accuracy digital temperature sensor.
* st,lsm6dsx
- Support for LSM6DS016IS (chip specific data)
- Support for ISM330IS (id entry only)
Minor cleanups etc
* adi,adis
- Fix a deadlock on device instance specific mutex.
- Tidy up by calling unlocked form of __adis_initial_startup() in all
cases and dropping the locked version.
* adi,ad4130
- Reference spi-peripehral-props.yaml in the dt-binding.
* adi,ad74413r
- Fix a bug brought on by integer promotion of signed value to unsigned type.
- Add an spi_device_id table to allow module autoloading to work.
- Add support for reset pin.
* adi,ad7606_par
- devm_platform_get_and_ioremap_resource() instead of opencoding.
* adi,ad7923
- Add dt-bindings docs for ad7927 via a fallback to ad7928 and do similar
for ad7924.
* adi,ltc2983
- Drop a now unneeded $ref for -nanoamp property as dt-schema no covers this
unit.
* maxim,max11410
- Fix mask due to repeated use of VREFN instead of one of them being VREFP.
* qcom,spmi-iadc
- Add fallback compatibles to dt-binding.
* renesas,rzg2l
- Document use for RZ/Five SoC.
* st,stm32-adc
- Improved calibration support with error logging and a debugfs
interface to read back the result.
* ti,adc128s052
- Fix an issue with missing data members in the adc128_of_match table that
meant all device were being handled as adc128s052 ADCs.
----------------------------------------------------------------
Antoniu Miclaus (2):
dt-bindings: iio: frequency: add adf4377 doc
iio: frequency: adf4377: add support for ADF4377
Cosmin Tanislav (6):
dt-bindings: iio: addac: add AD74115
iio: addac: add AD74115 driver
dt-bindings: iio: temperature: ltc2983: drop $ref for -nanoamp properties
dt-bindings: iio: adc: ad4130: use spi-peripheral-props.yaml
iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl
iio: addac: ad74413r: fix blank line after declaration warning
Edmund Berenson (1):
dt-bindings: iio: adc: ad7923: adjust documentation
Ibrahim Tilki (1):
iio: adc: max11410: fix incomplete vref buffer mask
Lad Prabhakar (1):
dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/Five SoC
Lorenzo Bianconi (4):
iio: imu: st_lsm6dsx: add support to LSM6DSO16IS
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dso16is
iio: imu: st_lsm6dsx: add support to ISM330IS
dt-bindings: iio: imu: st_lsm6dsx: add ism330is
Luca Weiss (1):
dt-bindings: iio/adc: qcom,spmi-iadc: use double compatibles
Minghao Chi (1):
iio: use devm_platform_get_and_ioremap_resource()
Olivier Moysan (3):
iio: adc: stm32-adc: smart calibration support
iio: adc: stm32-adc: improve calibration error log
iio: adc: stm32-adc: add debugfs to read raw calibration result
Rajat Khandelwal (1):
iio: temperature: Add driver support for Maxim MAX30208
Ramona Bolboaca (9):
iio: adis: add '__adis_enable_irq()' implementation
iio: accel: adis16201: Call '__adis_initial_startup()' in probe
iio: accel: adis16209: Call '__adis_initial_startup()' in probe
iio: gyro: adis16136: Call '__adis_initial_startup()' in probe
iio: gyro: adis16260: Call '__adis_initial_startup()' in probe
iio: imu: adis16400: Call '__adis_initial_startup()' in probe
staging: iio: accel: adis16203: Call '__adis_initial_startup()'
staging: iio: accel: adis16240: Call '__adis_initial_startup()'
iio: imu: adis: Remove adis_initial_startup function
Rasmus Villemoes (5):
iio: addac: ad74413r: fix integer promotion bug in ad74413_get_input_current_offset()
iio: addac: ad74413r: add spi_device_id table
dt-bindings: iio: ad74413r: add optional reset-gpios
iio: addac: ad74413r: add support for reset-gpio
iio: adc128s052: add proper .data members in adc128_of_match table
Uwe Kleine-König (143):
iio: accel: adxl372_i2c: Convert to i2c's .probe_new()
iio: accel: bma180: Convert to i2c's .probe_new()
iio: accel: bma400: Convert to i2c's .probe_new()
iio: accel: bmc150: Convert to i2c's .probe_new()
iio: accel: da280: Convert to i2c's .probe_new()
iio: accel: kxcjk-1013: Convert to i2c's .probe_new()
iio: accel: mma7455_i2c: Convert to i2c's .probe_new()
iio: accel: mma8452: Convert to i2c's .probe_new()
iio: accel: mma9551: Convert to i2c's .probe_new()
iio: accel: mma9553: Convert to i2c's .probe_new()
iio: adc: ad7091r5: Convert to i2c's .probe_new()
iio: adc: ad7291: Convert to i2c's .probe_new()
iio: adc: ad799x: Convert to i2c's .probe_new()
iio: adc: ina2xx-adc: Convert to i2c's .probe_new()
iio: adc: ltc2471: Convert to i2c's .probe_new()
iio: adc: ltc2485: Convert to i2c's .probe_new()
iio: adc: ltc2497: Convert to i2c's .probe_new()
iio: adc: max1363: Convert to i2c's .probe_new()
iio: adc: max9611: Convert to i2c's .probe_new()
iio: adc: mcp3422: Convert to i2c's .probe_new()
iio: adc: ti-adc081c: Convert to i2c's .probe_new()
iio: adc: ti-ads1015: Convert to i2c's .probe_new()
iio: cdc: ad7150: Convert to i2c's .probe_new()
iio: cdc: ad7746: Convert to i2c's .probe_new()
iio: chemical: ams-iaq-core: Convert to i2c's .probe_new()
iio: chemical: atlas-ezo-sensor: Convert to i2c's .probe_new()
iio: chemical: atlas-sensor: Convert to i2c's .probe_new()
iio: chemical: bme680_i2c: Convert to i2c's .probe_new()
iio: chemical: ccs811: Convert to i2c's .probe_new()
iio: chemical: scd4x: Convert to i2c's .probe_new()
iio: chemical: sgp30: Convert to i2c's .probe_new()
iio: chemical: sgp40: Convert to i2c's .probe_new()
iio: chemical: vz89x: Convert to i2c's .probe_new()
iio: dac: ad5064: Convert to i2c's .probe_new()
iio: dac: ad5380: Convert to i2c's .probe_new()
iio: dac: ad5446: Convert to i2c's .probe_new()
iio: dac: ad5593r: Convert to i2c's .probe_new()
iio: dac: ad5696-i2c: Convert to i2c's .probe_new()
iio: dac: ds4424: Convert to i2c's .probe_new()
iio: dac: m62332: Convert to i2c's .probe_new()
iio: dac: max517: Convert to i2c's .probe_new()
iio: dac: max5821: Convert to i2c's .probe_new()
iio: dac: mcp4725: Convert to i2c's .probe_new()
iio: dac: ti-dac5571: Convert to i2c's .probe_new()
iio: gyro: bmg160_i2c: Convert to i2c's .probe_new()
iio: gyro: itg3200_core: Convert to i2c's .probe_new()
iio: gyro: mpu3050-i2c: Convert to i2c's .probe_new()
iio: gyro: st_gyro_i2c: Convert to i2c's .probe_new()
iio: health: afe4404: Convert to i2c's .probe_new()
iio: health: max30100: Convert to i2c's .probe_new()
iio: health: max30102: Convert to i2c's .probe_new()
iio: humidity: am2315: Convert to i2c's .probe_new()
iio: humidity: hdc100x: Convert to i2c's .probe_new()
iio: humidity: hdc2010: Convert to i2c's .probe_new()
iio: humidity: hts221_i2c: Convert to i2c's .probe_new()
iio: humidity: htu21: Convert to i2c's .probe_new()
iio: humidity: si7005: Convert to i2c's .probe_new()
iio: humidity: si7020: Convert to i2c's .probe_new()
iio: imu: bmi160/bmi160_i2c: Convert to i2c's .probe_new()
iio: imu: fxos8700_i2c: Convert to i2c's .probe_new()
iio: imu: inv_mpu6050: Convert to i2c's .probe_new()
iio: imu: kmx61: Convert to i2c's .probe_new()
iio: imu: st_lsm6dsx: Convert to i2c's .probe_new()
iio: light: adjd_s311: Convert to i2c's .probe_new()
iio: light: adux1020: Convert to i2c's .probe_new()
iio: light: al3010: Convert to i2c's .probe_new()
iio: light: al3320a: Convert to i2c's .probe_new()
iio: light: apds9300: Convert to i2c's .probe_new()
iio: light: apds9960: Convert to i2c's .probe_new()
iio: light: bh1750: Convert to i2c's .probe_new()
iio: light: bh1780: Convert to i2c's .probe_new()
iio: light: cm3232: Convert to i2c's .probe_new()
iio: light: cm3323: Convert to i2c's .probe_new()
iio: light: cm36651: Convert to i2c's .probe_new()
iio: light: gp2ap002: Convert to i2c's .probe_new()
iio: light: gp2ap020a00f: Convert to i2c's .probe_new()
iio: light: isl29018: Convert to i2c's .probe_new()
iio: light: isl29028: Convert to i2c's .probe_new()
iio: light: isl29125: Convert to i2c's .probe_new()
iio: light: jsa1212: Convert to i2c's .probe_new()
iio: light: ltr501: Convert to i2c's .probe_new()
iio: light: lv0104cs: Convert to i2c's .probe_new()
iio: light: max44000: Convert to i2c's .probe_new()
iio: light: noa1305: Convert to i2c's .probe_new()
iio: light: opt3001: Convert to i2c's .probe_new()
iio: light: pa12203001: Convert to i2c's .probe_new()
iio: light: rpr0521: Convert to i2c's .probe_new()
iio: light: si1133: Convert to i2c's .probe_new()
iio: light: si1145: Convert to i2c's .probe_new()
iio: light: st_uvis25_i2c: Convert to i2c's .probe_new()
iio: light: stk3310: Convert to i2c's .probe_new()
iio: light: tcs3414: Convert to i2c's .probe_new()
iio: light: tcs3472: Convert to i2c's .probe_new()
iio: light: tsl2563: Convert to i2c's .probe_new()
iio: light: tsl2583: Convert to i2c's .probe_new()
iio: light: tsl2772: Convert to i2c's .probe_new()
iio: light: tsl4531: Convert to i2c's .probe_new()
iio: light: us5182d: Convert to i2c's .probe_new()
iio: light: vcnl4000: Convert to i2c's .probe_new()
iio: light: vcnl4035: Convert to i2c's .probe_new()
iio: light: veml6030: Convert to i2c's .probe_new()
iio: light: veml6070: Convert to i2c's .probe_new()
iio: light: zopt2201: Convert to i2c's .probe_new()
iio: magnetometer: ak8974: Convert to i2c's .probe_new()
iio: magnetometer: ak8975: Convert to i2c's .probe_new()
iio: magnetometer: bmc150_magn_i2c: Convert to i2c's .probe_new()
iio: magnetometer: hmc5843: Convert to i2c's .probe_new()
iio: magnetometer: mag3110: Convert to i2c's .probe_new()
iio: magnetometer: mmc35240: Convert to i2c's .probe_new()
iio: magnetometer: yamaha-yas530: Convert to i2c's .probe_new()
iio: potentiometer: ad5272: Convert to i2c's .probe_new()
iio: potentiometer: ds1803: Convert to i2c's .probe_new()
iio: potentiometer: max5432: Convert to i2c's .probe_new()
iio: potentiometer: tpl0102: Convert to i2c's .probe_new()
iio: potentiostat: lmp91000: Convert to i2c's .probe_new()
iio: pressure: abp060mg: Convert to i2c's .probe_new()
iio: pressure: dlhl60d: Convert to i2c's .probe_new()
iio: pressure: dps310: Convert to i2c's .probe_new()
iio: pressure: hp03: Convert to i2c's .probe_new()
iio: pressure: hp206c: Convert to i2c's .probe_new()
iio: pressure: icp10100: Convert to i2c's .probe_new()
iio: pressure: mpl115_i2c: Convert to i2c's .probe_new()
iio: pressure: mpl3115: Convert to i2c's .probe_new()
iio: pressure: ms5611_i2c: Convert to i2c's .probe_new()
iio: pressure: ms5637: Convert to i2c's .probe_new()
iio: pressure: st_pressure_i2c: Convert to i2c's .probe_new()
iio: pressure: t5403: Convert to i2c's .probe_new()
iio: pressure: zpa2326_i2c: Convert to i2c's .probe_new()
iio: proximity: isl29501: Convert to i2c's .probe_new()
iio: proximity: mb1232: Convert to i2c's .probe_new()
iio: proximity: pulsedlight-lidar-lite-v2: Convert to i2c's .probe_new()
iio: proximity: rfd77402: Convert to i2c's .probe_new()
iio: proximity: srf08: Convert to i2c's .probe_new()
iio: proximity: sx9500: Convert to i2c's .probe_new()
iio: temperature: mlx90614: Convert to i2c's .probe_new()
iio: temperature: mlx90632: Convert to i2c's .probe_new()
iio: temperature: tmp006: Convert to i2c's .probe_new()
iio: temperature: tmp007: Convert to i2c's .probe_new()
iio: temperature: tsys01: Convert to i2c's .probe_new()
iio: temperature: tsys02d: Convert to i2c's .probe_new()
staging: iio: adt7316: Convert to i2c's .probe_new()
staging: iio: ad5933: Convert to i2c's .probe_new()
staging: iio: ade7854: Convert to i2c's .probe_new()
.../devicetree/bindings/iio/adc/adi,ad4130.yaml | 5 +-
.../devicetree/bindings/iio/adc/adi,ad7923.yaml | 26 +-
.../bindings/iio/adc/qcom,spmi-iadc.yaml | 7 +-
.../bindings/iio/adc/renesas,rzg2l-adc.yaml | 2 +-
.../devicetree/bindings/iio/addac/adi,ad74115.yaml | 373 ++++
.../bindings/iio/addac/adi,ad74413r.yaml | 4 +
.../bindings/iio/frequency/adi,adf4377.yaml | 92 +
.../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 4 +
.../bindings/iio/temperature/adi,ltc2983.yaml | 1 -
MAINTAINERS | 22 +
drivers/iio/accel/adis16201.c | 2 +-
drivers/iio/accel/adis16209.c | 2 +-
drivers/iio/accel/adxl372_i2c.c | 6 +-
drivers/iio/accel/bma180.c | 6 +-
drivers/iio/accel/bma400_i2c.c | 6 +-
drivers/iio/accel/bmc150-accel-i2c.c | 6 +-
drivers/iio/accel/da280.c | 6 +-
drivers/iio/accel/kxcjk-1013.c | 6 +-
drivers/iio/accel/mma7455_i2c.c | 6 +-
drivers/iio/accel/mma8452.c | 6 +-
drivers/iio/accel/mma9551.c | 6 +-
drivers/iio/accel/mma9553.c | 6 +-
drivers/iio/adc/ad7091r5.c | 6 +-
drivers/iio/adc/ad7291.c | 6 +-
drivers/iio/adc/ad7606_par.c | 3 +-
drivers/iio/adc/ad799x.c | 6 +-
drivers/iio/adc/ina2xx-adc.c | 6 +-
drivers/iio/adc/ltc2471.c | 6 +-
drivers/iio/adc/ltc2485.c | 6 +-
drivers/iio/adc/ltc2497.c | 6 +-
drivers/iio/adc/max11410.c | 2 +-
drivers/iio/adc/max1363.c | 6 +-
drivers/iio/adc/max9611.c | 5 +-
drivers/iio/adc/mcp3422.c | 6 +-
drivers/iio/adc/stm32-adc-core.h | 1 +
drivers/iio/adc/stm32-adc.c | 135 +-
drivers/iio/adc/ti-adc081c.c | 6 +-
drivers/iio/adc/ti-adc128s052.c | 14 +-
drivers/iio/adc/ti-ads1015.c | 6 +-
drivers/iio/addac/Kconfig | 14 +
drivers/iio/addac/Makefile | 1 +
drivers/iio/addac/ad74115.c | 1943 ++++++++++++++++++++
drivers/iio/addac/ad74413r.c | 32 +-
drivers/iio/cdc/ad7150.c | 6 +-
drivers/iio/cdc/ad7746.c | 6 +-
drivers/iio/chemical/ams-iaq-core.c | 5 +-
drivers/iio/chemical/atlas-ezo-sensor.c | 6 +-
drivers/iio/chemical/atlas-sensor.c | 6 +-
drivers/iio/chemical/bme680_i2c.c | 6 +-
drivers/iio/chemical/ccs811.c | 6 +-
drivers/iio/chemical/scd4x.c | 4 +-
drivers/iio/chemical/sgp30.c | 6 +-
drivers/iio/chemical/sgp40.c | 6 +-
drivers/iio/chemical/vz89x.c | 6 +-
drivers/iio/dac/ad5064.c | 6 +-
drivers/iio/dac/ad5380.c | 6 +-
drivers/iio/dac/ad5446.c | 6 +-
drivers/iio/dac/ad5593r.c | 6 +-
drivers/iio/dac/ad5696-i2c.c | 6 +-
drivers/iio/dac/ds4424.c | 6 +-
drivers/iio/dac/m62332.c | 5 +-
drivers/iio/dac/max517.c | 6 +-
drivers/iio/dac/max5821.c | 6 +-
drivers/iio/dac/mcp4725.c | 6 +-
drivers/iio/dac/ti-dac5571.c | 6 +-
drivers/iio/frequency/Kconfig | 10 +
drivers/iio/frequency/Makefile | 1 +
drivers/iio/frequency/adf4377.c | 994 ++++++++++
drivers/iio/gyro/adis16136.c | 2 +-
drivers/iio/gyro/adis16260.c | 2 +-
drivers/iio/gyro/bmg160_i2c.c | 6 +-
drivers/iio/gyro/itg3200_core.c | 5 +-
drivers/iio/gyro/mpu3050-i2c.c | 6 +-
drivers/iio/gyro/st_gyro_i2c.c | 5 +-
drivers/iio/health/afe4404.c | 5 +-
drivers/iio/health/max30100.c | 5 +-
drivers/iio/health/max30102.c | 6 +-
drivers/iio/humidity/am2315.c | 5 +-
drivers/iio/humidity/hdc100x.c | 5 +-
drivers/iio/humidity/hdc2010.c | 5 +-
drivers/iio/humidity/hts221_i2c.c | 5 +-
drivers/iio/humidity/htu21.c | 6 +-
drivers/iio/humidity/si7005.c | 5 +-
drivers/iio/humidity/si7020.c | 5 +-
drivers/iio/imu/adis.c | 28 +-
drivers/iio/imu/adis16400.c | 2 +-
drivers/iio/imu/bmi160/bmi160_i2c.c | 6 +-
drivers/iio/imu/fxos8700_i2c.c | 6 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 7 +-
drivers/iio/imu/kmx61.c | 6 +-
drivers/iio/imu/st_lsm6dsx/Kconfig | 4 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 132 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 16 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 10 +
drivers/iio/light/adjd_s311.c | 5 +-
drivers/iio/light/adux1020.c | 5 +-
drivers/iio/light/al3010.c | 5 +-
drivers/iio/light/al3320a.c | 5 +-
drivers/iio/light/apds9300.c | 5 +-
drivers/iio/light/apds9960.c | 5 +-
drivers/iio/light/bh1750.c | 6 +-
drivers/iio/light/bh1780.c | 5 +-
drivers/iio/light/cm3232.c | 6 +-
drivers/iio/light/cm3323.c | 5 +-
drivers/iio/light/cm36651.c | 6 +-
drivers/iio/light/gp2ap002.c | 5 +-
drivers/iio/light/gp2ap020a00f.c | 6 +-
drivers/iio/light/isl29018.c | 6 +-
drivers/iio/light/isl29028.c | 6 +-
drivers/iio/light/isl29125.c | 5 +-
drivers/iio/light/jsa1212.c | 5 +-
drivers/iio/light/ltr501.c | 6 +-
drivers/iio/light/lv0104cs.c | 5 +-
drivers/iio/light/max44000.c | 5 +-
drivers/iio/light/noa1305.c | 5 +-
drivers/iio/light/opt3001.c | 5 +-
drivers/iio/light/pa12203001.c | 5 +-
drivers/iio/light/rpr0521.c | 5 +-
drivers/iio/light/si1133.c | 6 +-
drivers/iio/light/si1145.c | 6 +-
drivers/iio/light/st_uvis25_i2c.c | 5 +-
drivers/iio/light/stk3310.c | 5 +-
drivers/iio/light/tcs3414.c | 5 +-
drivers/iio/light/tcs3472.c | 5 +-
drivers/iio/light/tsl2563.c | 5 +-
drivers/iio/light/tsl2583.c | 5 +-
drivers/iio/light/tsl2772.c | 6 +-
drivers/iio/light/tsl4531.c | 5 +-
drivers/iio/light/us5182d.c | 5 +-
drivers/iio/light/vcnl4000.c | 6 +-
drivers/iio/light/vcnl4035.c | 5 +-
drivers/iio/light/veml6030.c | 5 +-
drivers/iio/light/veml6070.c | 5 +-
drivers/iio/light/zopt2201.c | 5 +-
drivers/iio/magnetometer/ak8974.c | 5 +-
drivers/iio/magnetometer/ak8975.c | 6 +-
drivers/iio/magnetometer/bmc150_magn_i2c.c | 6 +-
drivers/iio/magnetometer/hmc5843_i2c.c | 6 +-
drivers/iio/magnetometer/mag3110.c | 6 +-
drivers/iio/magnetometer/mmc35240.c | 5 +-
drivers/iio/magnetometer/yamaha-yas530.c | 6 +-
drivers/iio/potentiometer/ad5272.c | 6 +-
drivers/iio/potentiometer/ds1803.c | 5 +-
drivers/iio/potentiometer/max5432.c | 5 +-
drivers/iio/potentiometer/tpl0102.c | 6 +-
drivers/iio/potentiostat/lmp91000.c | 5 +-
drivers/iio/pressure/abp060mg.c | 6 +-
drivers/iio/pressure/dlhl60d.c | 6 +-
drivers/iio/pressure/dps310.c | 6 +-
drivers/iio/pressure/hp03.c | 6 +-
drivers/iio/pressure/hp206c.c | 6 +-
drivers/iio/pressure/icp10100.c | 5 +-
drivers/iio/pressure/mpl115_i2c.c | 6 +-
drivers/iio/pressure/mpl3115.c | 6 +-
drivers/iio/pressure/ms5611_i2c.c | 6 +-
drivers/iio/pressure/ms5637.c | 6 +-
drivers/iio/pressure/st_pressure_i2c.c | 5 +-
drivers/iio/pressure/t5403.c | 6 +-
drivers/iio/pressure/zpa2326_i2c.c | 6 +-
drivers/iio/proximity/isl29501.c | 5 +-
drivers/iio/proximity/mb1232.c | 6 +-
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 5 +-
drivers/iio/proximity/rfd77402.c | 5 +-
drivers/iio/proximity/srf08.c | 6 +-
drivers/iio/proximity/sx9500.c | 5 +-
drivers/iio/temperature/Kconfig | 10 +
drivers/iio/temperature/Makefile | 1 +
drivers/iio/temperature/max30208.c | 252 +++
drivers/iio/temperature/mlx90614.c | 6 +-
drivers/iio/temperature/mlx90632.c | 6 +-
drivers/iio/temperature/tmp006.c | 5 +-
drivers/iio/temperature/tmp007.c | 6 +-
drivers/iio/temperature/tsys01.c | 5 +-
drivers/iio/temperature/tsys02d.c | 6 +-
drivers/staging/iio/accel/adis16203.c | 2 +-
drivers/staging/iio/accel/adis16240.c | 2 +-
drivers/staging/iio/addac/adt7316-i2c.c | 6 +-
drivers/staging/iio/impedance-analyzer/ad5933.c | 6 +-
drivers/staging/iio/meter/ade7854-i2c.c | 5 +-
include/linux/iio/imu/adis.h | 11 +-
181 files changed, 4418 insertions(+), 545 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml
create mode 100644 drivers/iio/addac/ad74115.c
create mode 100644 drivers/iio/frequency/adf4377.c
create mode 100644 drivers/iio/temperature/max30208.c
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PULL] IIO: 2nd set of new device support, cleanups and minor fixes for 6.2
2022-11-26 18:47 [PULL] IIO: 2nd set of new device support, cleanups and minor fixes for 6.2 Jonathan Cameron
@ 2022-11-27 13:43 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2022-11-27 13:43 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Sat, Nov 26, 2022 at 06:47:58PM +0000, Jonathan Cameron wrote:
> The following changes since commit 12491d35551df69709777bd7769e1e33641943cc:
>
> iio: pressure: bmp280: convert to i2c's .probe_new() (2022-11-23 20:01:38 +0000)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.2b
Pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-11-27 13:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-26 18:47 [PULL] IIO: 2nd set of new device support, cleanups and minor fixes for 6.2 Jonathan Cameron
2022-11-27 13:43 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.